pch_gbe: convert pr_* to netdev_*

We may use nice macros to prefix our messages with proper device name.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h

@@ -633,6 +633,8 @@ struct pch_gbe_adapter {
 	struct pci_dev *ptp_pdev;
 };
 
+#define pch_gbe_hw_to_adapter(hw)	container_of(hw, struct pch_gbe_adapter, hw)
+
 extern const char pch_driver_version[];
 
 /* pch_gbe_main.c */

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c

@@ -71,7 +71,9 @@ static s32 pch_gbe_plat_init_hw(struct pch_gbe_hw *hw)
 
 	ret_val = pch_gbe_phy_get_id(hw);
 	if (ret_val) {
-		pr_err("pch_gbe_phy_get_id error\n");
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "pch_gbe_phy_get_id error\n");
 		return ret_val;
 	}
 	pch_gbe_phy_init_setting(hw);
@@ -116,7 +118,9 @@ static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
 s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
 {
 	if (!hw->reg) {
-		pr_err("ERROR: Registers not mapped\n");
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "ERROR: Registers not mapped\n");
 		return -ENOSYS;
 	}
 	pch_gbe_plat_init_function_pointers(hw);
@@ -129,9 +133,12 @@ s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
  */
 void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
 {
-	if (!hw->func->get_bus_info)
-		pr_err("ERROR: configuration\n");
-	else
+	if (!hw->func->get_bus_info) {
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "ERROR: configuration\n");
+		return;
+	}
 	hw->func->get_bus_info(hw);
 }
 
@@ -145,7 +152,9 @@ void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
 s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
 {
 	if (!hw->func->init_hw) {
-		pr_err("ERROR: configuration\n");
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "ERROR: configuration\n");
 		return -ENOSYS;
 	}
 	return hw->func->init_hw(hw);
@@ -191,9 +200,12 @@ s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
  */
 void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
 {
-	if (!hw->func->reset_phy)
-		pr_err("ERROR: configuration\n");
-	else
+	if (!hw->func->reset_phy) {
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "ERROR: configuration\n");
+		return;
+	}
 	hw->func->reset_phy(hw);
 }
 
@@ -203,9 +215,12 @@ void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
  */
 void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
 {
-	if (!hw->func->sw_reset_phy)
-		pr_err("ERROR: configuration\n");
-	else
+	if (!hw->func->sw_reset_phy) {
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "ERROR: configuration\n");
+		return;
+	}
 	hw->func->sw_reset_phy(hw);
 }
 
@@ -219,7 +234,9 @@ void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
 s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
 {
 	if (!hw->func->read_mac_addr) {
-		pr_err("ERROR: configuration\n");
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "ERROR: configuration\n");
 		return -ENOSYS;
 	}
 	return hw->func->read_mac_addr(hw);

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c

@@ -122,7 +122,7 @@ static int pch_gbe_set_settings(struct net_device *netdev,
 	}
 	ret = mii_ethtool_sset(&adapter->mii, ecmd);
 	if (ret) {
-		pr_err("Error: mii_ethtool_sset\n");
+		netdev_err(netdev, "Error: mii_ethtool_sset\n");
 		return ret;
 	}
 	hw->mac.link_speed = speed;

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c

@@ -237,16 +237,17 @@ static int pch_gbe_validate_option(int *value,
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			pr_debug("%s Enabled\n", opt->name);
+			netdev_dbg(adapter->netdev, "%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			pr_debug("%s Disabled\n", opt->name);
+			netdev_dbg(adapter->netdev, "%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			pr_debug("%s set to %i\n", opt->name, *value);
+			netdev_dbg(adapter->netdev, "%s set to %i\n",
+				   opt->name, *value);
 			return 0;
 		}
 		break;
@@ -258,7 +259,8 @@ static int pch_gbe_validate_option(int *value,
 			ent = &opt->arg.l.p[i];
 			if (*value == ent->i) {
 				if (ent->str[0] != '\0')
-					pr_debug("%s\n", ent->str);
+					netdev_dbg(adapter->netdev, "%s\n",
+						   ent->str);
 				return 0;
 			}
 		}
@@ -268,7 +270,7 @@ static int pch_gbe_validate_option(int *value,
 		BUG();
 	}
 
-	pr_debug("Invalid %s value specified (%i) %s\n",
+	netdev_dbg(adapter->netdev, "Invalid %s value specified (%i) %s\n",
 		   opt->name, *value, opt->err);
 	*value = opt->def;
 	return -1;
@@ -318,7 +320,8 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
 					 .p = an_list} }
 		};
 		if (speed || dplx) {
-			pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n");
+			netdev_dbg(adapter->netdev,
+				   "AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n");
 			hw->phy.autoneg_advertised = opt.def;
 		} else {
 			int tmp = AutoNeg;
@@ -332,13 +335,16 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
 	case 0:
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		if ((speed || dplx))
-			pr_debug("Speed and duplex autonegotiation enabled\n");
+			netdev_dbg(adapter->netdev,
+				   "Speed and duplex autonegotiation enabled\n");
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case HALF_DUPLEX:
-		pr_debug("Half Duplex specified without Speed\n");
-		pr_debug("Using Autonegotiation at Half Duplex only\n");
+		netdev_dbg(adapter->netdev,
+			   "Half Duplex specified without Speed\n");
+		netdev_dbg(adapter->netdev,
+			   "Using Autonegotiation at Half Duplex only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_10_HALF |
 						PHY_ADVERTISE_100_HALF;
@@ -346,8 +352,10 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case FULL_DUPLEX:
-		pr_debug("Full Duplex specified without Speed\n");
-		pr_debug("Using Autonegotiation at Full Duplex only\n");
+		netdev_dbg(adapter->netdev,
+			   "Full Duplex specified without Speed\n");
+		netdev_dbg(adapter->netdev,
+			   "Using Autonegotiation at Full Duplex only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_10_FULL |
 						PHY_ADVERTISE_100_FULL |
@@ -356,8 +364,10 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
 		hw->mac.link_duplex = DUPLEX_FULL;
 		break;
 	case SPEED_10:
-		pr_debug("10 Mbps Speed specified without Duplex\n");
-		pr_debug("Using Autonegotiation at 10 Mbps only\n");
+		netdev_dbg(adapter->netdev,
+			   "10 Mbps Speed specified without Duplex\n");
+		netdev_dbg(adapter->netdev,
+			   "Using Autonegotiation at 10 Mbps only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_10_HALF |
 						PHY_ADVERTISE_10_FULL;
@@ -365,22 +375,24 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case SPEED_10 + HALF_DUPLEX:
-		pr_debug("Forcing to 10 Mbps Half Duplex\n");
+		netdev_dbg(adapter->netdev, "Forcing to 10 Mbps Half Duplex\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 0;
 		hw->phy.autoneg_advertised = 0;
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case SPEED_10 + FULL_DUPLEX:
-		pr_debug("Forcing to 10 Mbps Full Duplex\n");
+		netdev_dbg(adapter->netdev, "Forcing to 10 Mbps Full Duplex\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 0;
 		hw->phy.autoneg_advertised = 0;
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_FULL;
 		break;
 	case SPEED_100:
-		pr_debug("100 Mbps Speed specified without Duplex\n");
-		pr_debug("Using Autonegotiation at 100 Mbps only\n");
+		netdev_dbg(adapter->netdev,
+			   "100 Mbps Speed specified without Duplex\n");
+		netdev_dbg(adapter->netdev,
+			   "Using Autonegotiation at 100 Mbps only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_100_HALF |
 						PHY_ADVERTISE_100_FULL;
@@ -388,28 +400,33 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case SPEED_100 + HALF_DUPLEX:
-		pr_debug("Forcing to 100 Mbps Half Duplex\n");
+		netdev_dbg(adapter->netdev,
+			   "Forcing to 100 Mbps Half Duplex\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 0;
 		hw->phy.autoneg_advertised = 0;
 		hw->mac.link_speed = SPEED_100;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case SPEED_100 + FULL_DUPLEX:
-		pr_debug("Forcing to 100 Mbps Full Duplex\n");
+		netdev_dbg(adapter->netdev,
+			   "Forcing to 100 Mbps Full Duplex\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 0;
 		hw->phy.autoneg_advertised = 0;
 		hw->mac.link_speed = SPEED_100;
 		hw->mac.link_duplex = DUPLEX_FULL;
 		break;
 	case SPEED_1000:
-		pr_debug("1000 Mbps Speed specified without Duplex\n");
+		netdev_dbg(adapter->netdev,
+			   "1000 Mbps Speed specified without Duplex\n");
 		goto full_duplex_only;
 	case SPEED_1000 + HALF_DUPLEX:
-		pr_debug("Half Duplex is not supported at 1000 Mbps\n");
+		netdev_dbg(adapter->netdev,
+			   "Half Duplex is not supported at 1000 Mbps\n");
 		/* fall through */
 	case SPEED_1000 + FULL_DUPLEX:
 full_duplex_only:
-		pr_debug("Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+		netdev_dbg(adapter->netdev,
+			   "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_1000_FULL;
 		hw->mac.link_speed = SPEED_1000;

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c

@@ -97,6 +97,7 @@
  */
 s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw)
 {
+	struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
 	struct pch_gbe_phy_info *phy = &hw->phy;
 	s32 ret;
 	u16 phy_id1;
@@ -115,7 +116,8 @@ s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw)
 	phy->id = (u32)phy_id1;
 	phy->id = ((phy->id << 6) | ((phy_id2 & 0xFC00) >> 10));
 	phy->revision = (u32) (phy_id2 & 0x000F);
-	pr_debug("phy->id : 0x%08x  phy->revision : 0x%08x\n",
+	netdev_dbg(adapter->netdev,
+		   "phy->id : 0x%08x  phy->revision : 0x%08x\n",
 		   phy->id, phy->revision);
 	return 0;
 }
@@ -134,7 +136,10 @@ s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data)
 	struct pch_gbe_phy_info *phy = &hw->phy;
 
 	if (offset > PHY_MAX_REG_ADDRESS) {
-		pr_err("PHY Address %d is out of range\n", offset);
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "PHY Address %d is out of range\n",
+			   offset);
 		return -EINVAL;
 	}
 	*data = pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_READ,
@@ -156,7 +161,10 @@ s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data)
 	struct pch_gbe_phy_info *phy = &hw->phy;
 
 	if (offset > PHY_MAX_REG_ADDRESS) {
-		pr_err("PHY Address %d is out of range\n", offset);
+		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
+
+		netdev_err(adapter->netdev, "PHY Address %d is out of range\n",
+			   offset);
 		return -EINVAL;
 	}
 	pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_WRITE,
@@ -246,15 +254,14 @@ void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
  */
 void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
 {
-	struct pch_gbe_adapter *adapter;
+	struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
 	struct ethtool_cmd     cmd = { .cmd = ETHTOOL_GSET };
 	int ret;
 	u16 mii_reg;
 
-	adapter = container_of(hw, struct pch_gbe_adapter, hw);
 	ret = mii_ethtool_gset(&adapter->mii, &cmd);
 	if (ret)
-		pr_err("Error: mii_ethtool_gset\n");
+		netdev_err(adapter->netdev, "Error: mii_ethtool_gset\n");
 
 	ethtool_cmd_speed_set(&cmd, hw->mac.link_speed);
 	cmd.duplex = hw->mac.link_duplex;
@@ -263,7 +270,7 @@ void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
 	pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET);
 	ret = mii_ethtool_sset(&adapter->mii, &cmd);
 	if (ret)
-		pr_err("Error: mii_ethtool_sset\n");
+		netdev_err(adapter->netdev, "Error: mii_ethtool_sset\n");
 
 	pch_gbe_phy_sw_reset(hw);