提交 43e5f612 编写于 作者: J Jean Delvare 提交者: Dave Airlie

drm/radeon/kms: Simplify I2C post_xfer function

There is no point in re-doing in post_xfer all the initialization
that was already done by pre_xfer. Instead, only do the work which
differs from pre_xfer.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
上级 a88cab2b
......@@ -81,8 +81,9 @@ bool radeon_ddc_probe(struct radeon_connector *radeon_connector, bool requires_e
/* bit banging i2c */
static void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state)
static int pre_xfer(struct i2c_adapter *i2c_adap)
{
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
struct radeon_device *rdev = i2c->dev->dev_private;
struct radeon_i2c_bus_rec *rec = &i2c->rec;
uint32_t temp;
......@@ -137,19 +138,30 @@ static void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state)
WREG32(rec->en_data_reg, temp);
/* mask the gpio pins for software use */
temp = RREG32(rec->mask_clk_reg);
if (lock_state)
temp |= rec->mask_clk_mask;
else
temp &= ~rec->mask_clk_mask;
temp = RREG32(rec->mask_clk_reg) | rec->mask_clk_mask;
WREG32(rec->mask_clk_reg, temp);
temp = RREG32(rec->mask_clk_reg);
temp = RREG32(rec->mask_data_reg) | rec->mask_data_mask;
WREG32(rec->mask_data_reg, temp);
temp = RREG32(rec->mask_data_reg);
if (lock_state)
temp |= rec->mask_data_mask;
else
temp &= ~rec->mask_data_mask;
return 0;
}
static void post_xfer(struct i2c_adapter *i2c_adap)
{
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
struct radeon_device *rdev = i2c->dev->dev_private;
struct radeon_i2c_bus_rec *rec = &i2c->rec;
uint32_t temp;
/* unmask the gpio pins for software use */
temp = RREG32(rec->mask_clk_reg) & ~rec->mask_clk_mask;
WREG32(rec->mask_clk_reg, temp);
temp = RREG32(rec->mask_clk_reg);
temp = RREG32(rec->mask_data_reg) & ~rec->mask_data_mask;
WREG32(rec->mask_data_reg, temp);
temp = RREG32(rec->mask_data_reg);
}
......@@ -209,22 +221,6 @@ static void set_data(void *i2c_priv, int data)
WREG32(rec->en_data_reg, val);
}
static int pre_xfer(struct i2c_adapter *i2c_adap)
{
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
radeon_i2c_do_lock(i2c, 1);
return 0;
}
static void post_xfer(struct i2c_adapter *i2c_adap)
{
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
radeon_i2c_do_lock(i2c, 0);
}
/* hw i2c */
static u32 radeon_get_i2c_prescale(struct radeon_device *rdev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册