brcmfmac: properly check for bus register errors

The brcmfmac driver ignores any errors on initialization with the
different busses by deferring the initialization to a workqueue and
ignoring all possible errors that might happen.  Fix up all of this by
only allowing the module to load if all bus registering worked properly.

Cc: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c

@@ -1217,13 +1217,9 @@ static struct sdio_driver brcmf_sdmmc_driver = {
 	},
 };
 
-void brcmf_sdio_register(void)
+int brcmf_sdio_register(void)
 {
-	int ret;
-
-	ret = sdio_register_driver(&brcmf_sdmmc_driver);
-	if (ret)
-		brcmf_err("sdio_register_driver failed: %d\n", ret);
+	return sdio_register_driver(&brcmf_sdmmc_driver);
 }
 
 void brcmf_sdio_exit(void)

drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h

@@ -275,11 +275,26 @@ void brcmf_bus_add_txhdrlen(struct device *dev, uint len);
 
 #ifdef CONFIG_BRCMFMAC_SDIO
 void brcmf_sdio_exit(void);
-void brcmf_sdio_register(void);
+int brcmf_sdio_register(void);
+#else
+static inline void brcmf_sdio_exit(void) { }
+static inline int brcmf_sdio_register(void) { return 0; }
 #endif
+
 #ifdef CONFIG_BRCMFMAC_USB
 void brcmf_usb_exit(void);
-void brcmf_usb_register(void);
+int brcmf_usb_register(void);
+#else
+static inline void brcmf_usb_exit(void) { }
+static inline int brcmf_usb_register(void) { return 0; }
+#endif
+
+#ifdef CONFIG_BRCMFMAC_PCIE
+void brcmf_pcie_exit(void);
+int brcmf_pcie_register(void);
+#else
+static inline void brcmf_pcie_exit(void) { }
+static inline int brcmf_pcie_register(void) { return 0; }
 #endif
 
 #endif /* BRCMFMAC_BUS_H */

drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c

@@ -1518,40 +1518,34 @@ void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state)
 	}
 }
 
-static void brcmf_driver_register(struct work_struct *work)
-{
-#ifdef CONFIG_BRCMFMAC_SDIO
-	brcmf_sdio_register();
-#endif
-#ifdef CONFIG_BRCMFMAC_USB
-	brcmf_usb_register();
-#endif
-#ifdef CONFIG_BRCMFMAC_PCIE
-	brcmf_pcie_register();
-#endif
-}
-static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register);
-
 int __init brcmf_core_init(void)
 {
-	if (!schedule_work(&brcmf_driver_work))
-		return -EBUSY;
+	int err;
 
+	err = brcmf_sdio_register();
+	if (err)
+		return err;
+
+	err = brcmf_usb_register();
+	if (err)
+		goto error_usb_register;
+
+	err = brcmf_pcie_register();
+	if (err)
+		goto error_pcie_register;
 	return 0;
+
+error_pcie_register:
+	brcmf_usb_exit();
+error_usb_register:
+	brcmf_sdio_exit();
+	return err;
 }
 
 void __exit brcmf_core_exit(void)
 {
-	cancel_work_sync(&brcmf_driver_work);
-
-#ifdef CONFIG_BRCMFMAC_SDIO
 	brcmf_sdio_exit();
-#endif
-#ifdef CONFIG_BRCMFMAC_USB
 	brcmf_usb_exit();
-#endif
-#ifdef CONFIG_BRCMFMAC_PCIE
 	brcmf_pcie_exit();
-#endif
 }
 

drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c

@@ -2140,15 +2140,10 @@ static struct pci_driver brcmf_pciedrvr = {
 };
 
 
-void brcmf_pcie_register(void)
+int brcmf_pcie_register(void)
 {
-	int err;
-
 	brcmf_dbg(PCIE, "Enter\n");
-	err = pci_register_driver(&brcmf_pciedrvr);
-	if (err)
-		brcmf_err(NULL, "PCIE driver registration failed, err=%d\n",
-			  err);
+	return pci_register_driver(&brcmf_pciedrvr);
 }
 
 

drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h

@@ -11,9 +11,4 @@ struct brcmf_pciedev {
 	struct brcmf_pciedev_info *devinfo;
 };
 
-
-void brcmf_pcie_exit(void);
-void brcmf_pcie_register(void);
-
-
 #endif /* BRCMFMAC_PCIE_H */

drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c

@@ -1584,8 +1584,8 @@ void brcmf_usb_exit(void)
 	usb_deregister(&brcmf_usbdrvr);
 }
 
-void brcmf_usb_register(void)
+int brcmf_usb_register(void)
 {
 	brcmf_dbg(USB, "Enter\n");
-	usb_register(&brcmf_usbdrvr);
+	return usb_register(&brcmf_usbdrvr);
 }