提交 4181b2c8 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Remove now useless VPD code

Now that the VPD searching code is abstracted away, the outer loop used
to detect the read-only large resource data type section is useless.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 df25bc38
......@@ -12547,7 +12547,8 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
static void __devinit tg3_read_partno(struct tg3 *tp)
{
unsigned char vpd_data[TG3_NVM_VPD_LEN]; /* in little-endian format */
int i;
unsigned int block_end, rosize, len;
int i = 0;
u32 magic;
if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
......@@ -12569,7 +12570,7 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
}
} else {
ssize_t cnt;
unsigned int pos = 0, i = 0;
unsigned int pos = 0;
for (; pos < TG3_NVM_VPD_LEN && i < 3; i++, pos += cnt) {
cnt = pci_read_vpd(tp->pdev, pos,
......@@ -12584,14 +12585,10 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
goto out_not_found;
}
/* Now parse and find the part number. */
for (i = 0; i < TG3_NVM_VPD_LEN - 2; ) {
unsigned int block_end, rosize;
i = pci_vpd_find_tag(vpd_data, i, TG3_NVM_VPD_LEN,
i = pci_vpd_find_tag(vpd_data, 0, TG3_NVM_VPD_LEN,
PCI_VPD_LRDT_RO_DATA);
if (i < 0)
break;
goto out_not_found;
rosize = pci_vpd_lrdt_size(&vpd_data[i]);
block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize;
......@@ -12602,22 +12599,19 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
i = pci_vpd_find_info_keyword(vpd_data, i, rosize,
PCI_VPD_RO_KEYWORD_PARTNO);
if (i > 0) {
u8 len = pci_vpd_info_field_size(&vpd_data[i]);
if (i < 0)
goto out_not_found;
len = pci_vpd_info_field_size(&vpd_data[i]);
i += PCI_VPD_INFO_FLD_HDR_SIZE;
if (len > TG3_BPN_SIZE ||
(len + i) > TG3_NVM_VPD_LEN)
break;
goto out_not_found;
memcpy(tp->board_part_number, &vpd_data[i], len);
return;
}
/* Part number not found. */
goto out_not_found;
}
out_not_found:
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册