From 41195d236e84458bebd4fdc218610a92231ac791 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 18 Jan 2013 15:12:23 +0530 Subject: [PATCH] ARC: SMP support ARC common code to enable a SMP system + ISS provided SMP extensions. ARC700 natively lacks SMP support, hence some of the core features are are only enabled if SoCs have the necessary h/w pixie-dust. This includes: -Inter Processor Interrupts (IPI) -Cache coherency -load-locked/store-conditional ... The low level exception handling would be completely broken in SMP because we don't have hardware assisted stack switching. Thus a fair bit of this code is repurposing the MMU_SCRATCH reg for event handler prologues to keep them re-entrant. Many thanks to Rajeshwar Ranga for his initial "major" contributions to SMP Port (back in 2008), and to Noam Camus and Gilad Ben-Yossef for help with resurrecting that in 3.2 kernel (2012). Note that this platform code is again singleton design pattern - so multiple SMP platforms won't build at the moment - this deficiency is addressed in subsequent patches within this series. Signed-off-by: Vineet Gupta Cc: Arnd Bergmann Cc: Thomas Gleixner Cc: Rajeshwar Ranga Cc: Noam Camus Cc: Gilad Ben-Yossef --- arch/arc/Kconfig | 39 ++- arch/arc/Makefile | 3 + arch/arc/include/asm/entry.h | 49 ++++ arch/arc/include/asm/mmu_context.h | 4 + arch/arc/include/asm/mutex.h | 9 + arch/arc/include/asm/pgtable.h | 4 + arch/arc/include/asm/processor.h | 8 + arch/arc/include/asm/smp.h | 107 ++++++++ arch/arc/kernel/Makefile | 1 + arch/arc/kernel/ctx_sw.c | 11 + arch/arc/kernel/entry.S | 4 + arch/arc/kernel/head.S | 33 +++ arch/arc/kernel/irq.c | 5 + arch/arc/kernel/setup.c | 4 + arch/arc/kernel/smp.c | 320 +++++++++++++++++++++++ arch/arc/mm/tlb.c | 6 + arch/arc/mm/tlbex.S | 38 +++ arch/arc/plat-arcfpga/Kconfig | 14 + arch/arc/plat-arcfpga/Makefile | 1 + arch/arc/plat-arcfpga/include/plat/irq.h | 10 +- arch/arc/plat-arcfpga/include/plat/smp.h | 115 ++++++++ arch/arc/plat-arcfpga/irq.c | 10 + arch/arc/plat-arcfpga/smp.c | 167 ++++++++++++ 23 files changed, 960 insertions(+), 2 deletions(-) create mode 100644 arch/arc/kernel/smp.c create mode 100644 arch/arc/plat-arcfpga/include/plat/smp.h create mode 100644 arch/arc/plat-arcfpga/smp.c diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 68350aa3d297..52f5c072f6da 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -116,9 +116,42 @@ config CPU_BIG_ENDIAN help Build kernel for Big Endian Mode of ARC CPU +config SMP + bool "Symmetric Multi-Processing (Incomplete)" + default n + select USE_GENERIC_SMP_HELPERS + help + This enables support for systems with more than one CPU. If you have + a system with only one CPU, like most personal computers, say N. If + you have a system with more than one CPU, say Y. + +if SMP + +config ARC_HAS_COH_CACHES + def_bool n + +config ARC_HAS_COH_LLSC + def_bool n + +config ARC_HAS_COH_RTSC + def_bool n + +config ARC_HAS_REENTRANT_IRQ_LV2 + def_bool n + +endif + +config NR_CPUS + int "Maximum number of CPUs (2-32)" + range 2 32 + depends on SMP + default "2" + menuconfig ARC_CACHE bool "Enable Cache Support" default y + # if SMP, cache enabled ONLY if ARC implementation has cache coherency + depends on !SMP || ARC_HAS_COH_CACHES if ARC_CACHE @@ -213,6 +246,8 @@ config ARC_COMPACT_IRQ_LEVELS default n # Timer HAS to be high priority, for any other high priority config select ARC_IRQ3_LV2 + # if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy + depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2 if ARC_COMPACT_IRQ_LEVELS @@ -261,6 +296,8 @@ config ARC_HAS_RTSC bool "Insn: RTSC (64-bit r/o cycle counter)" default y depends on ARC_CPU_REL_4_10 + # if SMP, enable RTSC only if counter is coherent across cores + depends on !SMP || ARC_HAS_COH_RTSC endmenu # "ARC CPU Configuration" @@ -309,7 +346,7 @@ menuconfig ARC_DBG config ARC_DBG_TLB_PARANOIA bool "Paranoia Checks in Low Level TLB Handlers" - depends on ARC_DBG + depends on ARC_DBG && !SMP default n config ARC_DBG_TLB_MISS_COUNT diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 642c0406d600..fae66bfc2bdb 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -133,3 +133,6 @@ archclean: # Thus forcing all exten calls in this file to be long calls export CFLAGS_decompress_inflate.o = -mmedium-calls export CFLAGS_initramfs.o = -mmedium-calls +ifdef CONFIG_SMP +export CFLAGS_core.o = -mmedium-calls +endif diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h index 23ef2de1e09f..23daa326fc9b 100644 --- a/arch/arc/include/asm/entry.h +++ b/arch/arc/include/asm/entry.h @@ -389,11 +389,19 @@ * to be saved again on kernel mode stack, as part of ptregs. *-------------------------------------------------------------*/ .macro EXCPN_PROLOG_FREEUP_REG reg +#ifdef CONFIG_SMP + sr \reg, [ARC_REG_SCRATCH_DATA0] +#else st \reg, [@ex_saved_reg1] +#endif .endm .macro EXCPN_PROLOG_RESTORE_REG reg +#ifdef CONFIG_SMP + lr \reg, [ARC_REG_SCRATCH_DATA0] +#else ld \reg, [@ex_saved_reg1] +#endif .endm /*-------------------------------------------------------------- @@ -508,7 +516,11 @@ /* restore original r9 , saved in int1_saved_reg * It will be saved on stack in macro: SAVE_CALLER_SAVED */ +#ifdef CONFIG_SMP + lr r9, [ARC_REG_SCRATCH_DATA0] +#else ld r9, [@int1_saved_reg] +#endif /* now we are ready to save the remaining context :) */ st orig_r8_IS_IRQ1, [sp, 8] /* Event Type */ @@ -639,6 +651,41 @@ bmsk \reg, \reg, 7 .endm +#ifdef CONFIG_SMP + +/*------------------------------------------------- + * Retrieve the current running task on this CPU + * 1. Determine curr CPU id. + * 2. Use it to index into _current_task[ ] + */ +.macro GET_CURR_TASK_ON_CPU reg + GET_CPU_ID \reg + ld.as \reg, [@_current_task, \reg] +.endm + +/*------------------------------------------------- + * Save a new task as the "current" task on this CPU + * 1. Determine curr CPU id. + * 2. Use it to index into _current_task[ ] + * + * Coded differently than GET_CURR_TASK_ON_CPU (which uses LD.AS) + * because ST r0, [r1, offset] can ONLY have s9 @offset + * while LD can take s9 (4 byte insn) or LIMM (8 byte insn) + */ + +.macro SET_CURR_TASK_ON_CPU tsk, tmp + GET_CPU_ID \tmp + add2 \tmp, @_current_task, \tmp + st \tsk, [\tmp] +#ifdef CONFIG_ARC_CURR_IN_REG + mov r25, \tsk +#endif + +.endm + + +#else /* Uniprocessor implementation of macros */ + .macro GET_CURR_TASK_ON_CPU reg ld \reg, [@_current_task] .endm @@ -650,6 +697,8 @@ #endif .endm +#endif /* SMP / UNI */ + /* ------------------------------------------------------------------ * Get the ptr to some field of Current Task at @off in task struct * -Uses r25 for Current task ptr if that is enabled diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h index d12f3dec8b70..0d71fb11b57c 100644 --- a/arch/arc/include/asm/mmu_context.h +++ b/arch/arc/include/asm/mmu_context.h @@ -147,8 +147,10 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { +#ifndef CONFIG_SMP /* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */ write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd); +#endif /* * Get a new ASID if task doesn't have a valid one. Possible when @@ -197,7 +199,9 @@ static inline void destroy_context(struct mm_struct *mm) static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) { +#ifndef CONFIG_SMP write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd); +#endif /* Unconditionally get a new ASID */ get_new_mmu_context(next); diff --git a/arch/arc/include/asm/mutex.h b/arch/arc/include/asm/mutex.h index 3be5e64da139..a2f88ff9f506 100644 --- a/arch/arc/include/asm/mutex.h +++ b/arch/arc/include/asm/mutex.h @@ -6,4 +6,13 @@ * published by the Free Software Foundation. */ +/* + * xchg() based mutex fast path maintains a state of 0 or 1, as opposed to + * atomic dec based which can "count" any number of lock contenders. + * This ideally needs to be fixed in core, but for now switching to dec ver. + */ +#if defined(CONFIG_SMP) && (CONFIG_NR_CPUS > 2) +#include +#else #include +#endif diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index dcb0701528aa..b7e36684c091 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -354,11 +354,15 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, * Thus use this macro only when you are certain that "current" is current * e.g. when dealing with signal frame setup code etc */ +#ifndef CONFIG_SMP #define pgd_offset_fast(mm, addr) \ ({ \ pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0); \ pgd_base + pgd_index(addr); \ }) +#else +#define pgd_offset_fast(mm, addr) pgd_offset(mm, addr) +#endif extern void paging_init(void); extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE); diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index b7b155610067..5f26b2c1cba0 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h @@ -58,7 +58,15 @@ unsigned long thread_saved_pc(struct task_struct *t); /* Prepare to copy thread state - unlazy all lazy status */ #define prepare_to_copy(tsk) do { } while (0) +/* + * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise + * get optimised away by gcc + */ +#ifdef CONFIG_SMP +#define cpu_relax() __asm__ __volatile__ ("" : : : "memory") +#else #define cpu_relax() do { } while (0) +#endif #define copy_segments(tsk, mm) do { } while (0) #define release_segments(mm) do { } while (0) diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 4341f3ba7d92..f91f1946272f 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -9,6 +9,69 @@ #ifndef __ASM_ARC_SMP_H #define __ASM_ARC_SMP_H +#ifdef CONFIG_SMP + +#include +#include +#include + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +/* including cpumask.h leads to cyclic deps hence this Forward declaration */ +struct cpumask; + +/* + * APIs provided by arch SMP code to generic code + */ +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); + +/* + * APIs provided by arch SMP code to rest of arch code + */ +extern void __init smp_init_cpus(void); +extern void __init first_lines_of_secondary(void); + +/* + * API expected BY platform smp code (FROM arch smp code) + * + * smp_ipi_irq_setup: + * Takes @cpu and @irq to which the arch-common ISR is hooked up + */ +extern int smp_ipi_irq_setup(int cpu, int irq); + +/* + * APIs expected FROM platform smp code + * + * arc_platform_smp_cpuinfo: + * returns a string containing info for /proc/cpuinfo + * + * arc_platform_smp_init_cpu: + * Called from start_kernel_secondary to do any CPU local setup + * such as starting a timer, setting up IPI etc + * + * arc_platform_smp_wait_to_boot: + * Called from early bootup code for non-Master CPUs to "park" them + * + * arc_platform_smp_wakeup_cpu: + * Called from __cpu_up (Master CPU) to kick start another one + * + * arc_platform_ipi_send: + * Takes @cpumask to which IPI(s) would be sent. + * The actual msg-id/buffer is manager in arch-common code + * + * arc_platform_ipi_clear: + * Takes @cpu which got IPI at @irq to do any IPI clearing + */ +extern const char *arc_platform_smp_cpuinfo(void); +extern void arc_platform_smp_init_cpu(void); +extern void arc_platform_smp_wait_to_boot(int cpu); +extern void arc_platform_smp_wakeup_cpu(int cpu, unsigned long pc); +extern void arc_platform_ipi_send(const struct cpumask *callmap); +extern void arc_platform_ipi_clear(int cpu, int irq); + +#endif /* CONFIG_SMP */ + /* * ARC700 doesn't support atomic Read-Modify-Write ops. * Originally Interrupts had to be disabled around code to gaurantee atomicity. @@ -18,10 +81,52 @@ * * (1) These insn were introduced only in 4.10 release. So for older released * support needed. + * + * (2) In a SMP setup, the LLOCK/SCOND atomiticity across CPUs needs to be + * gaurantted by the platform (not something which core handles). + * Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ + * disabling for atomicity. + * + * However exported spinlock API is not usable due to cyclic hdr deps + * (even after system.h disintegration upstream) + * asm/bitops.h -> linux/spinlock.h -> linux/preempt.h + * -> linux/thread_info.h -> linux/bitops.h -> asm/bitops.h + * + * So the workaround is to use the lowest level arch spinlock API. + * The exported spinlock API is smart enough to be NOP for !CONFIG_SMP, + * but same is not true for ARCH backend, hence the need for 2 variants */ #ifndef CONFIG_ARC_HAS_LLSC #include +#ifdef CONFIG_SMP + +#include + +extern arch_spinlock_t smp_atomic_ops_lock; +extern arch_spinlock_t smp_bitops_lock; + +#define atomic_ops_lock(flags) do { \ + local_irq_save(flags); \ + arch_spin_lock(&smp_atomic_ops_lock); \ +} while (0) + +#define atomic_ops_unlock(flags) do { \ + arch_spin_unlock(&smp_atomic_ops_lock); \ + local_irq_restore(flags); \ +} while (0) + +#define bitops_lock(flags) do { \ + local_irq_save(flags); \ + arch_spin_lock(&smp_bitops_lock); \ +} while (0) + +#define bitops_unlock(flags) do { \ + arch_spin_unlock(&smp_bitops_lock); \ + local_irq_restore(flags); \ +} while (0) + +#else /* !CONFIG_SMP */ #define atomic_ops_lock(flags) local_irq_save(flags) #define atomic_ops_unlock(flags) local_irq_restore(flags) @@ -29,6 +134,8 @@ #define bitops_lock(flags) local_irq_save(flags) #define bitops_unlock(flags) local_irq_restore(flags) +#endif /* !CONFIG_SMP */ + #endif /* !CONFIG_ARC_HAS_LLSC */ #endif diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile index f32f65f98850..46c15ff97e97 100644 --- a/arch/arc/kernel/Makefile +++ b/arch/arc/kernel/Makefile @@ -13,6 +13,7 @@ obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o clk.o obj-y += devtree.o obj-$(CONFIG_MODULES) += arcksyms.o module.o +obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o CFLAGS_fpu.o += -mdpfp diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c index fbf739cbaf7d..60844dac6132 100644 --- a/arch/arc/kernel/ctx_sw.c +++ b/arch/arc/kernel/ctx_sw.c @@ -58,7 +58,18 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task) * For SMP extra work to get to &_current_task[cpu] * (open coded SET_CURR_TASK_ON_CPU) */ +#ifndef CONFIG_SMP "st %2, [@_current_task] \n\t" +#else + "lr r24, [identity] \n\t" + "lsr r24, r24, 8 \n\t" + "bmsk r24, r24, 7 \n\t" + "add2 r24, @_current_task, r24 \n\t" + "st %2, [r24] \n\t" +#endif +#ifdef CONFIG_ARC_CURR_IN_REG + "mov r25, %2 \n\t" +#endif /* get ksp of incoming task from tsk->thread.ksp */ "ld.as sp, [%2, %1] \n\t" diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index e33a0bf45589..3f6ce98fea11 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -232,7 +232,11 @@ ARC_EXIT handle_interrupt_level2 ARC_ENTRY handle_interrupt_level1 /* free up r9 as scratchpad */ +#ifdef CONFIG_SMP + sr r9, [ARC_REG_SCRATCH_DATA0] +#else st r9, [@int1_saved_reg] +#endif ;Which mode (user/kernel) was the system in when intr occured lr r9, [status32_l1] diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index e63f6a43abb1..006dec3fc353 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -27,6 +27,15 @@ stext: ; Don't clobber r0-r4 yet. It might have bootloader provided info ;------------------------------------------------------------------- +#ifdef CONFIG_SMP + ; Only Boot (Master) proceeds. Others wait in platform dependent way + ; IDENTITY Reg [ 3 2 1 0 ] + ; (cpu-id) ^^^ => Zero for UP ARC700 + ; => #Core-ID if SMP (Master 0) + GET_CPU_ID r5 + cmp r5, 0 + jnz arc_platform_smp_wait_to_boot +#endif ; Clear BSS before updating any globals ; XXX: use ZOL here mov r5, __bss_start @@ -76,3 +85,27 @@ stext: GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output) j start_kernel ; "C" entry point + +#ifdef CONFIG_SMP +;---------------------------------------------------------------- +; First lines of code run by secondary before jumping to 'C' +;---------------------------------------------------------------- + .section .init.text, "ax",@progbits + .type first_lines_of_secondary, @function + .globl first_lines_of_secondary + +first_lines_of_secondary: + + ; setup per-cpu idle task as "current" on this CPU + ld r0, [@secondary_idle_tsk] + SET_CURR_TASK_ON_CPU r0, r1 + + ; setup stack (fp, sp) + mov fp, 0 + + ; set it's stack base to tsk->thread_info bottom + GET_TSK_STACK_BASE r0, sp + + j start_kernel_secondary + +#endif diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index ca70894e2309..df7da2b5a5bd 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -124,6 +124,11 @@ void __init init_IRQ(void) { init_onchip_IRQ(); plat_init_IRQ(); + +#ifdef CONFIG_SMP + /* Master CPU can initialize it's side of IPI */ + arc_platform_smp_init_cpu(); +#endif } /* diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 27aebd6d9513..4026b5a004d2 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -86,6 +86,10 @@ void __init setup_arch(char **cmdline_p) setup_processor(); +#ifdef CONFIG_SMP + smp_init_cpus(); +#endif + setup_arch_memory(); unflatten_device_tree(); diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c new file mode 100644 index 000000000000..1f762ad6969b --- /dev/null +++ b/arch/arc/kernel/smp.c @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * RajeshwarR: Dec 11, 2007 + * -- Added support for Inter Processor Interrupts + * + * Vineetg: Nov 1st, 2007 + * -- Initial Write (Borrowed heavily from ARM) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED; +arch_spinlock_t smp_bitops_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +/* XXX: per cpu ? Only needed once in early seconday boot */ +struct task_struct *secondary_idle_tsk; + +/* Called from start_kernel */ +void __init smp_prepare_boot_cpu(void) +{ +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i; + + for (i = 0; i < NR_CPUS; i++) + set_cpu_possible(i, true); +} + +/* called from init ( ) => process 1 */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + int i; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); +} + +void __init smp_cpus_done(unsigned int max_cpus) +{ + +} + +/* + * After power-up, a non Master CPU needs to wait for Master to kick start it + * + * The default implementation halts + * + * This relies on platform specific support allowing Master to directly set + * this CPU's PC (to be @first_lines_of_secondary() and kick start it. + * + * In lack of such h/w assist, platforms can override this function + * - make this function busy-spin on a token, eventually set by Master + * (from arc_platform_smp_wakeup_cpu()) + * - Once token is available, jump to @first_lines_of_secondary + * (using inline asm). + * + * Alert: can NOT use stack here as it has not been determined/setup for CPU. + * If it turns out to be elaborate, it's better to code it in assembly + * + */ +void __attribute__((weak)) arc_platform_smp_wait_to_boot(int cpu) +{ + /* + * As a hack for debugging - since debugger will single-step over the + * FLAG insn - wrap the halt itself it in a self loop + */ + __asm__ __volatile__( + "1: \n" + " flag 1 \n" + " b 1b \n"); +} + +/* + * The very first "C" code executed by secondary + * Called from asm stub in head.S + * "current"/R25 already setup by low level boot code + */ +void __cpuinit start_kernel_secondary(void) +{ + struct mm_struct *mm = &init_mm; + unsigned int cpu = smp_processor_id(); + + /* MMU, Caches, Vector Table, Interrupts etc */ + setup_processor(); + + atomic_inc(&mm->mm_users); + atomic_inc(&mm->mm_count); + current->active_mm = mm; + + notify_cpu_starting(cpu); + set_cpu_online(cpu, true); + + pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); + + arc_platform_smp_init_cpu(); + + arc_local_timer_setup(cpu); + + local_irq_enable(); + preempt_disable(); + cpu_idle(); +} + +/* + * Called from kernel_init( ) -> smp_init( ) - for each CPU + * + * At this point, Secondary Processor is "HALT"ed: + * -It booted, but was halted in head.S + * -It was configured to halt-on-reset + * So need to wake it up. + * + * Essential requirements being where to run from (PC) and stack (SP) +*/ +int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) +{ + unsigned long wait_till; + + secondary_idle_tsk = idle; + + pr_info("Idle Task [%d] %p", cpu, idle); + pr_info("Trying to bring up CPU%u ...\n", cpu); + + arc_platform_smp_wakeup_cpu(cpu, + (unsigned long)first_lines_of_secondary); + + /* wait for 1 sec after kicking the secondary */ + wait_till = jiffies + HZ; + while (time_before(jiffies, wait_till)) { + if (cpu_online(cpu)) + break; + } + + if (!cpu_online(cpu)) { + pr_info("Timeout: CPU%u FAILED to comeup !!!\n", cpu); + return -1; + } + + secondary_idle_tsk = NULL; + + return 0; +} + +/* + * not supported here + */ +int __init setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} + +/*****************************************************************************/ +/* Inter Processor Interrupt Handling */ +/*****************************************************************************/ + +/* + * structures for inter-processor calls + * A Collection of single bit ipi messages + * + */ + +/* + * TODO_rajesh investigate tlb message types. + * IPI Timer not needed because each ARC has an individual Interrupting Timer + */ +enum ipi_msg_type { + IPI_NOP = 0, + IPI_RESCHEDULE = 1, + IPI_CALL_FUNC, + IPI_CALL_FUNC_SINGLE, + IPI_CPU_STOP +}; + +struct ipi_data { + unsigned long bits; +}; + +static DEFINE_PER_CPU(struct ipi_data, ipi_data); + +static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg) +{ + unsigned long flags; + unsigned int cpu; + + local_irq_save(flags); + + for_each_cpu(cpu, callmap) { + struct ipi_data *ipi = &per_cpu(ipi_data, cpu); + set_bit(msg, &ipi->bits); + } + + /* Call the platform specific cross-CPU call function */ + arc_platform_ipi_send(callmap); + + local_irq_restore(flags); +} + +void smp_send_reschedule(int cpu) +{ + ipi_send_msg(cpumask_of(cpu), IPI_RESCHEDULE); +} + +void smp_send_stop(void) +{ + struct cpumask targets; + cpumask_copy(&targets, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &targets); + ipi_send_msg(&targets, IPI_CPU_STOP); +} + +void arch_send_call_function_single_ipi(int cpu) +{ + ipi_send_msg(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); +} + +void arch_send_call_function_ipi_mask(const struct cpumask *mask) +{ + ipi_send_msg(mask, IPI_CALL_FUNC); +} + +/* + * ipi_cpu_stop - handle IPI from smp_send_stop() + */ +static void ipi_cpu_stop(unsigned int cpu) +{ + machine_halt(); +} + +static inline void __do_IPI(unsigned long *ops, struct ipi_data *ipi, int cpu) +{ + unsigned long msg = 0; + + do { + msg = find_next_bit(ops, BITS_PER_LONG, msg+1); + + switch (msg) { + case IPI_RESCHEDULE: + scheduler_ipi(); + break; + + case IPI_CALL_FUNC: + generic_smp_call_function_interrupt(); + break; + + case IPI_CALL_FUNC_SINGLE: + generic_smp_call_function_single_interrupt(); + break; + + case IPI_CPU_STOP: + ipi_cpu_stop(cpu); + break; + } + } while (msg < BITS_PER_LONG); + +} + +/* + * arch-common ISR to handle for inter-processor interrupts + * Has hooks for platform specific IPI + */ +irqreturn_t do_IPI(int irq, void *dev_id) +{ + int cpu = smp_processor_id(); + struct ipi_data *ipi = &per_cpu(ipi_data, cpu); + unsigned long ops; + + arc_platform_ipi_clear(cpu, irq); + + /* + * XXX: is this loop really needed + * And do we need to move ipi_clean inside + */ + while ((ops = xchg(&ipi->bits, 0)) != 0) + __do_IPI(&ops, ipi, cpu); + + return IRQ_HANDLED; +} + +/* + * API called by platform code to hookup arch-common ISR to their IPI IRQ + */ +static DEFINE_PER_CPU(int, ipi_dev); +int smp_ipi_irq_setup(int cpu, int irq) +{ + int *dev_id = &per_cpu(ipi_dev, smp_processor_id()); + return request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev_id); +} diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 232a0ff80a5e..e96030c13b52 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -474,6 +474,12 @@ void __init arc_mmu_init(void) /* Enable the MMU */ write_aux_reg(ARC_REG_PID, MMU_ENABLE); + + /* In smp we use this reg for interrupt 1 scratch */ +#ifndef CONFIG_SMP + /* swapper_pg_dir is the pgd for the kernel, used by vmalloc */ + write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir); +#endif } /* diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 164b02169498..4b1ad2d905ca 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -57,9 +57,15 @@ .global ex_saved_reg1 .align 1 << L1_CACHE_SHIFT ; IMP: Must be Cache Line aligned .type ex_saved_reg1, @object +#ifdef CONFIG_SMP + .size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT) +ex_saved_reg1: + .zero (CONFIG_NR_CPUS << L1_CACHE_SHIFT) +#else .size ex_saved_reg1, 16 ex_saved_reg1: .zero 16 +#endif ;============================================================================ ; Troubleshooting Stuff @@ -116,7 +122,13 @@ ex_saved_reg1: lr r2, [efa] +#ifndef CONFIG_SMP lr r1, [ARC_REG_SCRATCH_DATA0] ; current pgd +#else + GET_CURR_TASK_ON_CPU r1 + ld r1, [r1, TASK_ACT_MM] + ld r1, [r1, MM_PGD] +#endif lsr r0, r2, PGDIR_SHIFT ; Bits for indexing into PGD ld.as r1, [r1, r0] ; PGD entry corresp to faulting addr @@ -192,12 +204,28 @@ ex_saved_reg1: ; ".size ex_saved_reg1, 16" ; [All of this dance is to avoid stack switching for each TLB Miss, since we ; only need to save only a handful of regs, as opposed to complete reg file] +; +; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST +; core reg as it will not be SMP safe. +; Thus scratch AUX reg is used (and no longer used to cache task PGD). +; To save the rest of 3 regs - per cpu, the global is made "per-cpu". +; Epilogue thus has to locate the "per-cpu" storage for regs. +; To avoid cache line bouncing the per-cpu global is aligned/sized per +; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence +; ".size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)" ; As simple as that.... .macro TLBMISS_FREEUP_REGS +#ifdef CONFIG_SMP + sr r0, [ARC_REG_SCRATCH_DATA0] ; freeup r0 to code with + GET_CPU_ID r0 ; get to per cpu scratch mem, + lsl r0, r0, L1_CACHE_SHIFT ; cache line wide per cpu + add r0, @ex_saved_reg1, r0 +#else st r0, [@ex_saved_reg1] mov_s r0, @ex_saved_reg1 +#endif st_s r1, [r0, 4] st_s r2, [r0, 8] st_s r3, [r0, 12] @@ -210,11 +238,21 @@ ex_saved_reg1: ;----------------------------------------------------------------- .macro TLBMISS_RESTORE_REGS +#ifdef CONFIG_SMP + GET_CPU_ID r0 ; get to per cpu scratch mem + lsl r0, r0, L1_CACHE_SHIFT ; each is cache line wide + add r0, @ex_saved_reg1, r0 + ld_s r3, [r0,12] + ld_s r2, [r0, 8] + ld_s r1, [r0, 4] + lr r0, [ARC_REG_SCRATCH_DATA0] +#else mov_s r0, @ex_saved_reg1 ld_s r3, [r0,12] ld_s r2, [r0, 8] ld_s r1, [r0, 4] ld_s r0, [r0] +#endif .endm .section .text, "ax",@progbits ;Fast Path Code, candidate for ICCM diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig index 7af3a4e7f7d2..38752bfb91e0 100644 --- a/arch/arc/plat-arcfpga/Kconfig +++ b/arch/arc/plat-arcfpga/Kconfig @@ -13,6 +13,7 @@ choice config ARC_BOARD_ANGEL4 bool "ARC Angel4" + select ISS_SMP_EXTN if SMP help ARC Angel4 FPGA Ref Platform (Xilinx Virtex Based) @@ -21,6 +22,19 @@ config ARC_BOARD_ML509 help ARC ML509 FPGA Ref Platform (Xilinx Virtex-5 Based) +config ISS_SMP_EXTN + bool "ARC SMP Extensions (ISS Models only)" + default n + depends on SMP + select ARC_HAS_COH_RTSC + help + SMP Extensions to ARC700, in a "simulation only" Model, supported in + ARC ISS (Instruction Set Simulator). + The SMP extensions include: + -IDU (Interrupt Distribution Unit) + -XTL (To enable CPU start/stop/set-PC for another CPU) + It doesn't provide coherent Caches and/or Atomic Ops (LLOCK/SCOND) + endchoice config ARC_SERIAL_BAUD diff --git a/arch/arc/plat-arcfpga/Makefile b/arch/arc/plat-arcfpga/Makefile index 385eb9d83b63..2a828bec8212 100644 --- a/arch/arc/plat-arcfpga/Makefile +++ b/arch/arc/plat-arcfpga/Makefile @@ -7,3 +7,4 @@ # obj-y := platform.o irq.o +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/arc/plat-arcfpga/include/plat/irq.h b/arch/arc/plat-arcfpga/include/plat/irq.h index b34e08734c65..255b90e973ee 100644 --- a/arch/arc/plat-arcfpga/include/plat/irq.h +++ b/arch/arc/plat-arcfpga/include/plat/irq.h @@ -12,7 +12,11 @@ #ifndef __PLAT_IRQ_H #define __PLAT_IRQ_H -#define NR_IRQS 16 +#ifdef CONFIG_SMP +#define NR_IRQS 32 +#else +#define NR_IRQS 16 +#endif #define UART0_IRQ 5 #define UART1_IRQ 10 @@ -24,4 +28,8 @@ #define PCI_IRQ 14 #define PS2_IRQ 15 +#ifdef CONFIG_SMP +#define IDU_INTERRUPT_0 16 +#endif + #endif diff --git a/arch/arc/plat-arcfpga/include/plat/smp.h b/arch/arc/plat-arcfpga/include/plat/smp.h new file mode 100644 index 000000000000..8c5e46c01b15 --- /dev/null +++ b/arch/arc/plat-arcfpga/include/plat/smp.h @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Rajeshwar Ranga: Interrupt Distribution Unit API's + */ + +#ifndef __PLAT_ARCFPGA_SMP_H +#define __PLAT_ARCFPGA_SMP_H + +#ifdef CONFIG_SMP + +#include +#include + +#define ARC_AUX_IDU_REG_CMD 0x2000 +#define ARC_AUX_IDU_REG_PARAM 0x2001 + +#define ARC_AUX_XTL_REG_CMD 0x2002 +#define ARC_AUX_XTL_REG_PARAM 0x2003 + +#define ARC_REG_MP_BCR 0x2021 + +#define ARC_XTL_CMD_WRITE_PC 0x04 +#define ARC_XTL_CMD_CLEAR_HALT 0x02 + +/* + * Build Configuration Register which identifies the sub-components + */ +struct bcr_mp { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int mp_arch:16, pad:5, sdu:1, idu:1, scu:1, ver:8; +#else + unsigned int ver:8, scu:1, idu:1, sdu:1, pad:5, mp_arch:16; +#endif +}; + +/* IDU supports 256 common interrupts */ +#define NR_IDU_IRQS 256 + +/* + * The Aux Regs layout is same bit-by-bit in both BE/LE modes. + * However when casted as a bitfield encoded "C" struct, gcc treats it as + * memory, generating different code for BE/LE, requiring strcture adj (see + * include/asm/arcregs.h) + * + * However when manually "carving" the value for a Aux, no special handling + * of BE is needed because of the property discribed above + */ +#define IDU_SET_COMMAND(irq, cmd) \ +do { \ + uint32_t __val; \ + __val = (((irq & 0xFF) << 8) | (cmd & 0xFF)); \ + write_aux_reg(ARC_AUX_IDU_REG_CMD, __val); \ +} while (0) + +#define IDU_SET_PARAM(par) write_aux_reg(ARC_AUX_IDU_REG_PARAM, par) +#define IDU_GET_PARAM() read_aux_reg(ARC_AUX_IDU_REG_PARAM) + +/* IDU Commands */ +#define IDU_DISABLE 0x00 +#define IDU_ENABLE 0x01 +#define IDU_IRQ_CLEAR 0x02 +#define IDU_IRQ_ASSERT 0x03 +#define IDU_IRQ_WMODE 0x04 +#define IDU_IRQ_STATUS 0x05 +#define IDU_IRQ_ACK 0x06 +#define IDU_IRQ_PEND 0x07 +#define IDU_IRQ_RMODE 0x08 +#define IDU_IRQ_WBITMASK 0x09 +#define IDU_IRQ_RBITMASK 0x0A + +#define idu_enable() IDU_SET_COMMAND(0, IDU_ENABLE) +#define idu_disable() IDU_SET_COMMAND(0, IDU_DISABLE) + +#define idu_irq_assert(irq) IDU_SET_COMMAND((irq), IDU_IRQ_ASSERT) +#define idu_irq_clear(irq) IDU_SET_COMMAND((irq), IDU_IRQ_CLEAR) + +/* IDU Interrupt Mode - Destination Encoding */ +#define IDU_IRQ_MOD_DISABLE 0x00 +#define IDU_IRQ_MOD_ROUND_RECP 0x01 +#define IDU_IRQ_MOD_TCPU_FIRSTRECP 0x02 +#define IDU_IRQ_MOD_TCPU_ALLRECP 0x03 + +/* IDU Interrupt Mode - Triggering Mode */ +#define IDU_IRQ_MODE_LEVEL_TRIG 0x00 +#define IDU_IRQ_MODE_PULSE_TRIG 0x01 + +#define IDU_IRQ_MODE_PARAM(dest_mode, trig_mode) \ + (((trig_mode & 0x01) << 15) | (dest_mode & 0xFF)) + +struct idu_irq_config { + uint8_t irq; + uint8_t dest_mode; + uint8_t trig_mode; +}; + +struct idu_irq_status { + uint8_t irq; + bool enabled; + bool status; + bool ack; + bool pend; + uint8_t next_rr; +}; + +extern void idu_irq_set_tgtcpu(uint8_t irq, uint32_t mask); +extern void idu_irq_set_mode(uint8_t irq, uint8_t dest_mode, uint8_t trig_mode); + +#endif /* CONFIG_SMP */ + +#endif diff --git a/arch/arc/plat-arcfpga/irq.c b/arch/arc/plat-arcfpga/irq.c index ed726360b9f6..590edd174c47 100644 --- a/arch/arc/plat-arcfpga/irq.c +++ b/arch/arc/plat-arcfpga/irq.c @@ -9,7 +9,17 @@ */ #include +#include void __init plat_init_IRQ(void) { + /* + * SMP Hack because UART IRQ hardwired to cpu0 (boot-cpu) but if the + * request_irq() comes from any other CPU, the low level IRQ unamsking + * essential for getting Interrupts won't be enabled on cpu0, locking + * up the UART state machine. + */ +#ifdef CONFIG_SMP + arch_unmask_irq(UART0_IRQ); +#endif } diff --git a/arch/arc/plat-arcfpga/smp.c b/arch/arc/plat-arcfpga/smp.c new file mode 100644 index 000000000000..a95fcdb29033 --- /dev/null +++ b/arch/arc/plat-arcfpga/smp.c @@ -0,0 +1,167 @@ +/* + * ARC700 Simulation-only Extensions for SMP + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Vineet Gupta - 2012 : split off arch common and plat specific SMP + * Rajeshwar Ranga - 2007 : Interrupt Distribution Unit API's + */ + +#include +#include +#include + +static char smp_cpuinfo_buf[128]; + +/* + *------------------------------------------------------------------- + * Platform specific callbacks expected by arch SMP code + *------------------------------------------------------------------- + */ + +const char *arc_platform_smp_cpuinfo(void) +{ +#define IS_AVAIL1(var, str) ((var) ? str : "") + + struct bcr_mp mp; + + READ_BCR(ARC_REG_MP_BCR, mp); + + sprintf(smp_cpuinfo_buf, "Extn [700-SMP]: v%d, arch(%d) %s %s %s\n", + mp.ver, mp.mp_arch, IS_AVAIL1(mp.scu, "SCU"), + IS_AVAIL1(mp.idu, "IDU"), IS_AVAIL1(mp.sdu, "SDU")); + + return smp_cpuinfo_buf; +} + +/* + * Master kick starting another CPU + */ +void arc_platform_smp_wakeup_cpu(int cpu, unsigned long pc) +{ + /* setup the start PC */ + write_aux_reg(ARC_AUX_XTL_REG_PARAM, pc); + + /* Trigger WRITE_PC cmd for this cpu */ + write_aux_reg(ARC_AUX_XTL_REG_CMD, + (ARC_XTL_CMD_WRITE_PC | (cpu << 8))); + + /* Take the cpu out of Halt */ + write_aux_reg(ARC_AUX_XTL_REG_CMD, + (ARC_XTL_CMD_CLEAR_HALT | (cpu << 8))); + +} + +/* + * Any SMP specific init any CPU does when it comes up. + * Here we setup the CPU to enable Inter-Processor-Interrupts + * Called for each CPU + * -Master : init_IRQ() + * -Other(s) : start_kernel_secondary() + */ +void arc_platform_smp_init_cpu(void) +{ + int cpu = smp_processor_id(); + + /* Check if CPU is configured for more than 16 interrupts */ + if (NR_IRQS <= 16 || get_hw_config_num_irq() <= 16) + panic("[arcfpga] IRQ system can't support IDU IPI\n"); + + idu_disable(); + + /**************************************************************** + * IDU provides a set of Common IRQs, each of which can be dynamically + * attached to (1|many|all) CPUs. + * The Common IRQs [0-15] are mapped as CPU pvt [16-31] + * + * Here we use a simple 1:1 mapping: + * A CPU 'x' is wired to Common IRQ 'x'. + * So an IDU ASSERT on IRQ 'x' will trigger Interupt on CPU 'x', which + * makes up for our simple IPI plumbing. + * + * TBD: Have a dedicated multicast IRQ for sending IPIs to all CPUs + * w/o having to do one-at-a-time + ******************************************************************/ + + /* + * Claim an IRQ which would trigger IPI on this CPU. + * In IDU parlance it involves setting up a cpu bitmask for the IRQ + * The bitmap here contains only 1 CPU (self). + */ + idu_irq_set_tgtcpu(cpu, 0x1 << cpu); + + /* Set the IRQ destination to use the bitmask above */ + idu_irq_set_mode(cpu, 7, /* XXX: IDU_IRQ_MOD_TCPU_ALLRECP: ISS bug */ + IDU_IRQ_MODE_PULSE_TRIG); + + idu_enable(); + + /* Attach the arch-common IPI ISR to our IDU IRQ */ + smp_ipi_irq_setup(cpu, IDU_INTERRUPT_0 + cpu); +} + +void arc_platform_ipi_send(const struct cpumask *callmap) +{ + unsigned int cpu; + + for_each_cpu(cpu, callmap) + idu_irq_assert(cpu); +} + +void arc_platform_ipi_clear(int cpu, int irq) +{ + idu_irq_clear(IDU_INTERRUPT_0 + cpu); +} + +/* + *------------------------------------------------------------------- + * Low level Platform IPI Providers + *------------------------------------------------------------------- + */ + +/* Set the Mode for the Common IRQ */ +void idu_irq_set_mode(uint8_t irq, uint8_t dest_mode, uint8_t trig_mode) +{ + uint32_t par = IDU_IRQ_MODE_PARAM(dest_mode, trig_mode); + + IDU_SET_PARAM(par); + IDU_SET_COMMAND(irq, IDU_IRQ_WMODE); +} + +/* Set the target cpu Bitmask for Common IRQ */ +void idu_irq_set_tgtcpu(uint8_t irq, uint32_t mask) +{ + IDU_SET_PARAM(mask); + IDU_SET_COMMAND(irq, IDU_IRQ_WBITMASK); +} + +/* Get the Interrupt Acknowledged status for IRQ (as CPU Bitmask) */ +bool idu_irq_get_ack(uint8_t irq) +{ + uint32_t val; + + IDU_SET_COMMAND(irq, IDU_IRQ_ACK); + val = IDU_GET_PARAM(); + + return val & (1 << irq); +} + +/* + * Get the Interrupt Pending status for IRQ (as CPU Bitmask) + * -Pending means CPU has not yet noticed the IRQ (e.g. disabled) + * -After Interrupt has been taken, the IPI expcitily needs to be + * cleared, to be acknowledged. + */ +bool idu_irq_get_pend(uint8_t irq) +{ + uint32_t val; + + IDU_SET_COMMAND(irq, IDU_IRQ_PEND); + val = IDU_GET_PARAM(); + + return val & (1 << irq); +} -- GitLab