From 3edad321b1bd2e6c8b5f38146c115c8982438f06 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 23 Apr 2013 16:21:26 -0300 Subject: [PATCH] drivers: memory: Introduce Marvell EBU Device Bus driver Marvell EBU SoCs such as Armada 370/XP, Orion5x (88f5xxx) and Discovery (mv78xx0) supports a Device Bus controller to access several kinds of memories and I/O devices (NOR, NAND, SRAM, FPGA). This commit adds a driver to handle this controller. So far only Armada 370, Armada XP and Discovery SoCs are supported. The driver must be registered through a device tree node; as explained in the binding document. For each child node in the device tree, this driver will: * set timing parameters * register a child device * setup an address decoding window, using the mbus driver Keep in mind the address decoding window setup is only a temporary hack. This code will be removed from this devbus driver as soon as a proper device tree binding for the mbus driver is added. Signed-off-by: Ezequiel Garcia Acked-by: Arnd Bergmann Acked-by: Jason Cooper Signed-off-by: Greg Kroah-Hartman --- .../memory-controllers/mvebu-devbus.txt | 156 ++++++++ drivers/memory/Kconfig | 10 + drivers/memory/Makefile | 1 + drivers/memory/mvebu-devbus.c | 340 ++++++++++++++++++ 4 files changed, 507 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt create mode 100644 drivers/memory/mvebu-devbus.c diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt new file mode 100644 index 000000000000..653c90c34a71 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt @@ -0,0 +1,156 @@ +Device tree bindings for MVEBU Device Bus controllers + +The Device Bus controller available in some Marvell's SoC allows to control +different types of standard memory and I/O devices such as NOR, NAND, and FPGA. +The actual devices are instantiated from the child nodes of a Device Bus node. + +Required properties: + + - compatible: Currently only Armada 370/XP SoC are supported, + with this compatible string: + + marvell,mvebu-devbus + + - reg: A resource specifier for the register space. + This is the base address of a chip select within + the controller's register space. + (see the example below) + + - #address-cells: Must be set to 1 + - #size-cells: Must be set to 1 + - ranges: Must be set up to reflect the memory layout with four + integer values for each chip-select line in use: + 0 + +Mandatory timing properties for child nodes: + +Read parameters: + + - devbus,turn-off-ps: Defines the time during which the controller does not + drive the AD bus after the completion of a device read. + This prevents contentions on the Device Bus after a read + cycle from a slow device. + + - devbus,bus-width: Defines the bus width (e.g. <16>) + + - devbus,badr-skew-ps: Defines the time delay from from A[2:0] toggle, + to read data sample. This parameter is useful for + synchronous pipelined devices, where the address + precedes the read data by one or two cycles. + + - devbus,acc-first-ps: Defines the time delay from the negation of + ALE[0] to the cycle that the first read data is sampled + by the controller. + + - devbus,acc-next-ps: Defines the time delay between the cycle that + samples data N and the cycle that samples data N+1 + (in burst accesses). + + - devbus,rd-setup-ps: Defines the time delay between DEV_CSn assertion to + DEV_OEn assertion. If set to 0 (default), + DEV_OEn and DEV_CSn are asserted at the same cycle. + This parameter has no affect on parameter + (no affect on first data sample). Set + to a value smaller than . + + - devbus,rd-hold-ps: Defines the time between the last data sample to the + de-assertion of DEV_CSn. If set to 0 (default), + DEV_OEn and DEV_CSn are de-asserted at the same cycle + (the cycle of the last data sample). + This parameter has no affect on DEV_OEn de-assertion. + DEV_OEn is always de-asserted the next cycle after + last data sampled. Also this parameter has no + affect on parameter. + Set to a value smaller than . + +Write parameters: + + - devbus,ale-wr-ps: Defines the time delay from the ALE[0] negation cycle + to the DEV_WEn assertion. + + - devbus,wr-low-ps: Defines the time during which DEV_WEn is active. + A[2:0] and Data are kept valid as long as DEV_WEn + is active. This parameter defines the setup time of + address and data to DEV_WEn rise. + + - devbus,wr-high-ps: Defines the time during which DEV_WEn is kept + inactive (high) between data beats of a burst write. + DEV_A[2:0] and Data are kept valid (do not toggle) for + - ps. + This parameter defines the hold time of address and + data after DEV_WEn rise. + + - devbus,sync-enable: Synchronous device enable. + 1: True + 0: False + +An example for an Armada XP GP board, with a 16 MiB NOR device as child +is showed below. Note that the Device Bus driver is in charge of allocating +the mbus address decoding window for each of its child devices. +The window is created using the chip select specified in the child +device node together with the base address and size specified in the ranges +property. For instance, in the example below the allocated decoding window +will start at base address 0xf0000000, with a size 0x1000000 (16 MiB) +for chip select 0 (a.k.a DEV_BOOTCS). + +This address window handling is done in this mvebu-devbus only as a temporary +solution. It will be removed when the support for mbus device tree binding is +added. + +The reg property implicitly specifies the chip select as this: + + 0x10400: DEV_BOOTCS + 0x10408: DEV_CS0 + 0x10410: DEV_CS1 + 0x10418: DEV_CS2 + 0x10420: DEV_CS3 + +Example: + + devbus-bootcs@d0010400 { + status = "okay"; + ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */ + #address-cells = <1>; + #size-cells = <1>; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + flash@0 { + compatible = "cfi-flash"; + + /* 16 MiB */ + reg = <0 0x1000000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + /* + * We split the 16 MiB in two partitions, + * just as an example. + */ + partition@0 { + label = "First"; + reg = <0 0x800000>; + }; + + partition@800000 { + label = "Second"; + reg = <0x800000 0x800000>; + }; + }; + }; diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 067f31174a0e..29a11db365bc 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -20,6 +20,16 @@ config TI_EMIF parameters and other settings during frequency, voltage and temperature changes +config MVEBU_DEVBUS + bool "Marvell EBU Device Bus Controller" + default y + depends on PLAT_ORION && OF + help + This driver is for the Device Bus controller available in some + Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and + Armada 370 and Armada XP. This controller allows to handle flash + devices such as NOR, NAND, SRAM, and FPGA. + config TEGRA20_MC bool "Tegra20 Memory Controller(MC) driver" default y diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index 9cce5d70ed52..969d923dad93 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -6,5 +6,6 @@ ifeq ($(CONFIG_DDR),y) obj-$(CONFIG_OF) += of_memory.o endif obj-$(CONFIG_TI_EMIF) += emif.o +obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c new file mode 100644 index 000000000000..978e8e3abc5c --- /dev/null +++ b/drivers/memory/mvebu-devbus.c @@ -0,0 +1,340 @@ +/* + * Marvell EBU SoC Device Bus Controller + * (memory controller for NOR/NAND/SRAM/FPGA devices) + * + * Copyright (C) 2013 Marvell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register definitions */ +#define DEV_WIDTH_BIT 30 +#define BADR_SKEW_BIT 28 +#define RD_HOLD_BIT 23 +#define ACC_NEXT_BIT 17 +#define RD_SETUP_BIT 12 +#define ACC_FIRST_BIT 6 + +#define SYNC_ENABLE_BIT 24 +#define WR_HIGH_BIT 16 +#define WR_LOW_BIT 8 + +#define READ_PARAM_OFFSET 0x0 +#define WRITE_PARAM_OFFSET 0x4 + +static const char * const devbus_wins[] = { + "devbus-boot", + "devbus-cs0", + "devbus-cs1", + "devbus-cs2", + "devbus-cs3", +}; + +struct devbus_read_params { + u32 bus_width; + u32 badr_skew; + u32 turn_off; + u32 acc_first; + u32 acc_next; + u32 rd_setup; + u32 rd_hold; +}; + +struct devbus_write_params { + u32 sync_enable; + u32 wr_high; + u32 wr_low; + u32 ale_wr; +}; + +struct devbus { + struct device *dev; + void __iomem *base; + unsigned long tick_ps; +}; + +static int get_timing_param_ps(struct devbus *devbus, + struct device_node *node, + const char *name, + u32 *ticks) +{ + u32 time_ps; + int err; + + err = of_property_read_u32(node, name, &time_ps); + if (err < 0) { + dev_err(devbus->dev, "%s has no '%s' property\n", + name, node->full_name); + return err; + } + + *ticks = (time_ps + devbus->tick_ps - 1) / devbus->tick_ps; + + dev_dbg(devbus->dev, "%s: %u ps -> 0x%x\n", + name, time_ps, *ticks); + return 0; +} + +static int devbus_set_timing_params(struct devbus *devbus, + struct device_node *node) +{ + struct devbus_read_params r; + struct devbus_write_params w; + u32 value; + int err; + + dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n", + devbus->tick_ps); + + /* Get read timings */ + err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width); + if (err < 0) { + dev_err(devbus->dev, + "%s has no 'devbus,bus-width' property\n", + node->full_name); + return err; + } + /* Convert bit width to byte width */ + r.bus_width /= 8; + + err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps", + &r.badr_skew); + if (err < 0) + return err; + + err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps", + &r.turn_off); + if (err < 0) + return err; + + err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps", + &r.acc_first); + if (err < 0) + return err; + + err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps", + &r.acc_next); + if (err < 0) + return err; + + err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps", + &r.rd_setup); + if (err < 0) + return err; + + err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps", + &r.rd_hold); + if (err < 0) + return err; + + /* Get write timings */ + err = of_property_read_u32(node, "devbus,sync-enable", + &w.sync_enable); + if (err < 0) { + dev_err(devbus->dev, + "%s has no 'devbus,sync-enable' property\n", + node->full_name); + return err; + } + + err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps", + &w.ale_wr); + if (err < 0) + return err; + + err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps", + &w.wr_low); + if (err < 0) + return err; + + err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps", + &w.wr_high); + if (err < 0) + return err; + + /* Set read timings */ + value = r.bus_width << DEV_WIDTH_BIT | + r.badr_skew << BADR_SKEW_BIT | + r.rd_hold << RD_HOLD_BIT | + r.acc_next << ACC_NEXT_BIT | + r.rd_setup << RD_SETUP_BIT | + r.acc_first << ACC_FIRST_BIT | + r.turn_off; + + dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n", + devbus->base + READ_PARAM_OFFSET, + value); + + writel(value, devbus->base + READ_PARAM_OFFSET); + + /* Set write timings */ + value = w.sync_enable << SYNC_ENABLE_BIT | + w.wr_low << WR_LOW_BIT | + w.wr_high << WR_HIGH_BIT | + w.ale_wr; + + dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n", + devbus->base + WRITE_PARAM_OFFSET, + value); + + writel(value, devbus->base + WRITE_PARAM_OFFSET); + + return 0; +} + +static int mvebu_devbus_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = pdev->dev.of_node; + struct device_node *parent; + struct devbus *devbus; + struct resource *res; + struct clk *clk; + unsigned long rate; + const __be32 *ranges; + int err, cs; + int addr_cells, p_addr_cells, size_cells; + int ranges_len, tuple_len; + u32 base, size; + + devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL); + if (!devbus) + return -ENOMEM; + + devbus->dev = dev; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + devbus->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(devbus->base)) + return PTR_ERR(devbus->base); + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + clk_prepare_enable(clk); + + /* + * Obtain clock period in picoseconds, + * we need this in order to convert timing + * parameters from cycles to picoseconds. + */ + rate = clk_get_rate(clk) / 1000; + devbus->tick_ps = 1000000000 / rate; + + /* Read the device tree node and set the new timing parameters */ + err = devbus_set_timing_params(devbus, node); + if (err < 0) + return err; + + /* + * Allocate an address window for this device. + * If the device probing fails, then we won't be able to + * remove the allocated address decoding window. + * + * FIXME: This is only a temporary hack! We need to do this here + * because we still don't have device tree bindings for mbus. + * Once that support is added, we will declare these address windows + * statically in the device tree, and remove the window configuration + * from here. + */ + + /* + * Get the CS to choose the window string. + * This is a bit hacky, but it will be removed once the + * address windows are declared in the device tree. + */ + cs = (((unsigned long)devbus->base) % 0x400) / 8; + + /* + * Parse 'ranges' property to obtain a (base,size) window tuple. + * This will be removed once the address windows + * are declared in the device tree. + */ + parent = of_get_parent(node); + if (!parent) + return -EINVAL; + + p_addr_cells = of_n_addr_cells(parent); + of_node_put(parent); + + addr_cells = of_n_addr_cells(node); + size_cells = of_n_size_cells(node); + tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32); + + ranges = of_get_property(node, "ranges", &ranges_len); + if (ranges == NULL || ranges_len != tuple_len) + return -EINVAL; + + base = of_translate_address(node, ranges + addr_cells); + if (base == OF_BAD_ADDR) + return -EINVAL; + size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells); + + /* + * Create an mbus address windows. + * FIXME: Remove this, together with the above code, once the + * address windows are declared in the device tree. + */ + err = mvebu_mbus_add_window(devbus_wins[cs], base, size); + if (err < 0) + return err; + + /* + * We need to create a child device explicitly from here to + * guarantee that the child will be probed after the timing + * parameters for the bus are written. + */ + err = of_platform_populate(node, NULL, NULL, dev); + if (err < 0) { + mvebu_mbus_del_window(base, size); + return err; + } + + return 0; +} + +static const struct of_device_id mvebu_devbus_of_match[] = { + { .compatible = "marvell,mvebu-devbus" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match); + +static struct platform_driver mvebu_devbus_driver = { + .probe = mvebu_devbus_probe, + .driver = { + .name = "mvebu-devbus", + .owner = THIS_MODULE, + .of_match_table = mvebu_devbus_of_match, + }, +}; + +static int __init mvebu_devbus_init(void) +{ + return platform_driver_register(&mvebu_devbus_driver); +} +module_init(mvebu_devbus_init); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ezequiel Garcia "); +MODULE_DESCRIPTION("Marvell EBU SoC Device Bus controller"); -- GitLab