From 3ec5fa28c9ea54fb172859d2612a0be6526e4dc1 Mon Sep 17 00:00:00 2001 From: Sebastian Sanchez Date: Thu, 9 Jun 2016 07:51:57 -0700 Subject: [PATCH] IB/hfi1: Remove FULL_MGMT_P_KEY from pkey table at link up FULL_MGMT_P_KEY doesn't get cleared from the pkey table at link bounce because the link down and link bounce code paths are different when moving a QSFP cable on a switch. This causes an HFI unit connected to a switch to try to be initialized to an FM node when the QSFP cable is moved from a MgmtAllowed=NO port to a MgmtAllowed=YES port and back to a MgmtAllowed=NO port. Remove FULL_MGMT_P_KEY from pkey table at link up. Reviewed-by: Dean Luick Signed-off-by: Sebastian Sanchez Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index c533d4422399..3487fdfb2c63 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -1037,7 +1037,7 @@ static void dc_shutdown(struct hfi1_devdata *); static void dc_start(struct hfi1_devdata *); static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp, unsigned int *np); -static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd); +static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd); /* * Error interrupt table entry. This is used as input to the interrupt @@ -6962,8 +6962,6 @@ void handle_link_down(struct work_struct *work) } reset_neighbor_info(ppd); - if (ppd->mgmt_allowed) - remove_full_mgmt_pkey(ppd); /* disable the port */ clear_rcvctrl(ppd->dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); @@ -7072,10 +7070,12 @@ static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd) (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); } -static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd) +static void clear_full_mgmt_pkey(struct hfi1_pportdata *ppd) { - ppd->pkeys[2] = 0; - (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + if (ppd->pkeys[2] != 0) { + ppd->pkeys[2] = 0; + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); + } } /* @@ -9168,6 +9168,13 @@ int start_link(struct hfi1_pportdata *ppd) return 0; } + /* + * FULL_MGMT_P_KEY is cleared from the pkey table, so that the + * pkey table can be configured properly if the HFI unit is connected + * to switch port with MgmtAllowed=NO + */ + clear_full_mgmt_pkey(ppd); + return set_link_state(ppd, HLS_DN_POLL); } -- GitLab