ARM: dts: bcm283x: Fix up GPIO LED node names

stable inclusion
from stable-5.10.53
commit fc71d8df58070018fc013b091ed60cc464fd6313
bugzilla: 175574 https://gitee.com/openeuler/kernel/issues/I4DTUX

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fc71d8df58070018fc013b091ed60cc464fd6313

--------------------------------

[ Upstream commit 5f30dacf ]

Fix the node names for the GPIO LEDs to conform to the standard node
name led-..
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.comSigned-off-by: NNicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

arch/arm/boot/dts/bcm2711-rpi-4-b.dts

@@ -28,11 +28,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";

arch/arm/boot/dts/bcm2835-rpi-a-plus.dts

@@ -14,11 +14,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";

arch/arm/boot/dts/bcm2835-rpi-a.dts

@@ -14,7 +14,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};

arch/arm/boot/dts/bcm2835-rpi-b-plus.dts

@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";

arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts

@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};

arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi

@@ -5,7 +5,7 @@
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

@@ -23,7 +23,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};

arch/arm/boot/dts/bcm2835-rpi-zero.dts

@@ -18,7 +18,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 	};

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -4,7 +4,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		act {
+		led-act {
 			label = "ACT";
 			default-state = "keep";
 			linux,default-trigger = "heartbeat";

arch/arm/boot/dts/bcm2836-rpi-2-b.dts

@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";

arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts

@@ -19,11 +19,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";

arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts

@@ -20,11 +20,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -20,7 +20,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};

arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi

@@ -14,7 +14,7 @@
 		 * Since there is no upstream GPIO driver yet,
 		 * remove the incomplete node.
 		 */
-		/delete-node/ act;
+		/delete-node/ led-act;
 	};
 
 	reg_3v3: fixed-regulator {