提交 3a9ab393 编写于 作者: D David S. Miller

Merge branch 'ipv6-add-ip6erspan-collect_md-mode'

William Tu says:

====================
ipv6: add ip6erspan collect_md mode

Similar to erspan collect_md mode in ipv4, the first patch adds
support for ip6erspan collect metadata mode.  The second patch
adds the test case using bpf_skb_[gs]et_tunnel_key helpers.

The corresponding iproute2 patch:
https://marc.info/?l=linux-netdev&m=151251545410047&w=2
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -524,8 +524,37 @@ static int ip6erspan_rcv(struct sk_buff *skb, int gre_hdr_len,
false, false) < 0)
return PACKET_REJECT;
if (tunnel->parms.collect_md) {
struct metadata_dst *tun_dst;
struct ip_tunnel_info *info;
struct erspan_metadata *md;
__be64 tun_id;
__be16 flags;
tpi->flags |= TUNNEL_KEY;
flags = tpi->flags;
tun_id = key32_to_tunnel_id(tpi->key);
tun_dst = ipv6_tun_rx_dst(skb, flags, tun_id,
sizeof(*md));
if (!tun_dst)
return PACKET_REJECT;
info = &tun_dst->u.tun_info;
md = ip_tunnel_info_opts(info);
if (!md)
return PACKET_REJECT;
md->index = index;
info->key.tun_flags |= TUNNEL_ERSPAN_OPT;
info->options_len = sizeof(*md);
ip6_tnl_rcv(tunnel, skb, tpi, tun_dst, log_ecn_error);
} else {
tunnel->parms.index = ntohl(index);
ip6_tnl_rcv(tunnel, skb, tpi, NULL, log_ecn_error);
}
return PACKET_RCVD;
}
......@@ -857,6 +886,44 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
if (gre_handle_offloads(skb, false))
goto tx_err;
if (skb->len > dev->mtu + dev->hard_header_len) {
pskb_trim(skb, dev->mtu + dev->hard_header_len);
truncate = true;
}
t->parms.o_flags &= ~TUNNEL_KEY;
IPCB(skb)->flags = 0;
/* For collect_md mode, derive fl6 from the tunnel key,
* for native mode, call prepare_ip6gre_xmit_{ipv4,ipv6}.
*/
if (t->parms.collect_md) {
struct ip_tunnel_info *tun_info;
const struct ip_tunnel_key *key;
struct erspan_metadata *md;
tun_info = skb_tunnel_info(skb);
if (unlikely(!tun_info ||
!(tun_info->mode & IP_TUNNEL_INFO_TX) ||
ip_tunnel_info_af(tun_info) != AF_INET6))
return -EINVAL;
key = &tun_info->key;
memset(&fl6, 0, sizeof(fl6));
fl6.flowi6_proto = IPPROTO_GRE;
fl6.daddr = key->u.ipv6.dst;
fl6.flowlabel = key->label;
fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
dsfield = key->tos;
md = ip_tunnel_info_opts(tun_info);
if (!md)
goto tx_err;
erspan_build_header(skb, tunnel_id_to_key32(key->tun_id),
ntohl(md->index), truncate, false);
} else {
switch (skb->protocol) {
case htons(ETH_P_IP):
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
......@@ -875,24 +942,17 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
break;
}
if (skb->len > dev->mtu + dev->hard_header_len) {
pskb_trim(skb, dev->mtu + dev->hard_header_len);
truncate = true;
}
erspan_build_header(skb, t->parms.o_key, t->parms.index,
truncate, false);
t->parms.o_flags &= ~TUNNEL_KEY;
IPCB(skb)->flags = 0;
fl6.daddr = t->parms.raddr;
}
/* Push GRE header. */
gre_build_header(skb, 8, TUNNEL_SEQ,
htons(ETH_P_ERSPAN), 0, htonl(t->o_seqno++));
/* TooBig packet may have updated dst->dev's mtu */
if (dst && dst_mtu(dst) > dst->dev->mtu)
if (!t->parms.collect_md && dst && dst_mtu(dst) > dst->dev->mtu)
dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu);
err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
......
......@@ -181,6 +181,64 @@ int _erspan_get_tunnel(struct __sk_buff *skb)
return TC_ACT_OK;
}
SEC("ip4ip6erspan_set_tunnel")
int _ip4ip6erspan_set_tunnel(struct __sk_buff *skb)
{
struct bpf_tunnel_key key;
struct erspan_metadata md;
int ret;
__builtin_memset(&key, 0x0, sizeof(key));
key.remote_ipv6[3] = _htonl(0x11);
key.tunnel_id = 2;
key.tunnel_tos = 0;
key.tunnel_ttl = 64;
ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key),
BPF_F_TUNINFO_IPV6);
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
md.index = htonl(123);
ret = bpf_skb_set_tunnel_opt(skb, &md, sizeof(md));
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
return TC_ACT_OK;
}
SEC("ip4ip6erspan_get_tunnel")
int _ip4ip6erspan_get_tunnel(struct __sk_buff *skb)
{
char fmt[] = "key %d remote ip6 ::%x erspan index 0x%x\n";
struct bpf_tunnel_key key;
struct erspan_metadata md;
u32 index;
int ret;
ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), BPF_F_TUNINFO_IPV6);
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
ret = bpf_skb_get_tunnel_opt(skb, &md, sizeof(md));
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
index = bpf_ntohl(md.index);
bpf_trace_printk(fmt, sizeof(fmt),
key.tunnel_id, key.remote_ipv6[0], index);
return TC_ACT_OK;
}
SEC("vxlan_set_tunnel")
int _vxlan_set_tunnel(struct __sk_buff *skb)
{
......
......@@ -70,6 +70,28 @@ function add_erspan_tunnel {
ip addr add dev $DEV 10.1.1.200/24
}
function add_ip6erspan_tunnel {
# assign ipv6 address
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip addr add dev veth1 ::22/96
ip link set dev veth1 up
# in namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE seq key 2 erspan 123 \
local ::11 remote ::22
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns0 ip link set dev $DEV_NS up
# out of namespace
ip link add dev $DEV type $TYPE external
ip addr add dev $DEV 10.1.1.200/24
ip link set dev $DEV up
}
function add_vxlan_tunnel {
# Set static ARP entry here because iptables set-mark works
# on L3 packet, as a result not applying to ARP packets,
......@@ -184,6 +206,18 @@ function test_erspan {
cleanup
}
function test_ip6erspan {
TYPE=ip6erspan
DEV_NS=ip6erspan00
DEV=ip6erspan11
config_device
add_ip6erspan_tunnel
attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel
ping6 -c 3 ::11
ip netns exec at_ns0 ping -c 1 10.1.1.200
cleanup
}
function test_vxlan {
TYPE=vxlan
DEV_NS=vxlan00
......@@ -239,6 +273,7 @@ function cleanup {
ip link del vxlan11
ip link del geneve11
ip link del erspan11
ip link del ip6erspan11
pkill tcpdump
pkill cat
set -ex
......@@ -254,6 +289,8 @@ echo "Testing IP6GRETAP tunnel..."
test_ip6gretap
echo "Testing ERSPAN tunnel..."
test_erspan
echo "Testing IP6ERSPAN tunnel..."
test_ip6erspan
echo "Testing VXLAN tunnel..."
test_vxlan
echo "Testing GENEVE tunnel..."
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册