diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index f8324d8d06ac893b622bb1463371497011fb092b..3e66b2a9974a2adc4fac46bf2a328b04b976d922 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -72,22 +72,6 @@ config USB_SUSPEND If you are unsure about this, say N here. -config USB_MULTITHREAD_PROBE - bool "USB Multi-threaded probe (EXPERIMENTAL)" - depends on USB && EXPERIMENTAL - default n - help - Say Y here if you want the USB core to spawn a new thread for - every USB device that is probed. This can cause a small speedup - in boot times on systems with a lot of different USB devices. - - This option should be safe to enable, but if any odd probing - problems are found, please disable it, or dynamically turn it - off in the /sys/module/usbcore/parameters/multithread_probe - file - - When in doubt, say N. - config USB_OTG bool depends on USB && EXPERIMENTAL diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 2651c2e2a89f5671e842b4c979f84f8d75857449..1988224b362bf417f2618a8bcb1e448d32f87eee 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -88,14 +88,7 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait); static struct task_struct *khubd_task; /* multithreaded probe logic */ -static int multithread_probe = -#ifdef CONFIG_USB_MULTITHREAD_PROBE - 1; -#else - 0; -#endif -module_param(multithread_probe, bool, S_IRUGO); -MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread"); +static int multithread_probe = 0; /* cycle leds on hubs that aren't blinking for attention */ static int blinkenlights = 0; diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 43ae696b2ec28f1f872271f1cd304485dc833858..3348b07f0fe507209a261575d43d1d15073b7d55 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -169,7 +169,7 @@ static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev) static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct ochi_hcd *ohci = hcd_to_ohci(hcd); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); if (time_before(jiffies, ohci->next_statechange)) msleep(5); diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 6e739efee6f79d7b2c291ac60168c1af7a473476..ea3636d96e1ba4f03e6d5967c71d7dbe3944287b 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -796,6 +796,9 @@ void usbhid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_LOGITECH 0x046d #define USB_DEVICE_ID_LOGITECH_USB_RECEIVER 0xc101 +#define USB_VENDOR_ID_IMATION 0x0718 +#define USB_DEVICE_ID_DISC_STAKKA 0xd000 + /* * Alphabetically sorted blacklist by quirk type. */ @@ -883,6 +886,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_GTCO_IPANEL_1, USB_DEVICE_ID_GTCO_10, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_8, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_d, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 7f3c57da9bc0767abf96a69e87f02b13fa296249..86e37a20f8e55997f6af50c6bbcb279937047993 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -66,7 +66,7 @@ struct usbtouch_device_info { void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); int (*get_pkt_len) (unsigned char *pkt, int len); - int (*read_data) (unsigned char *pkt, int *x, int *y, int *touch, int *press); + int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); int (*init) (struct usbtouch_usb *usbtouch); }; @@ -85,6 +85,9 @@ struct usbtouch_usb { struct usbtouch_device_info *type; char name[128]; char phys[64]; + + int x, y; + int touch, press; }; @@ -161,14 +164,14 @@ static struct usb_device_id usbtouch_devices[] = { #define EGALAX_PKT_TYPE_REPT 0x80 #define EGALAX_PKT_TYPE_DIAG 0x0A -static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) return 0; - *x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); - *y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); - *touch = pkt[0] & 0x01; + dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); + dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); + dev->touch = pkt[0] & 0x01; return 1; } @@ -195,11 +198,11 @@ static int egalax_get_pkt_len(unsigned char *buf, int len) * PanJit Part */ #ifdef CONFIG_USB_TOUCHSCREEN_PANJIT -static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - *x = ((pkt[2] & 0x0F) << 8) | pkt[1]; - *y = ((pkt[4] & 0x0F) << 8) | pkt[3]; - *touch = pkt[0] & 0x01; + dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; return 1; } @@ -215,11 +218,11 @@ static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int #define MTOUCHUSB_RESET 7 #define MTOUCHUSB_REQ_CTRLLR_ID 10 -static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - *x = (pkt[8] << 8) | pkt[7]; - *y = (pkt[10] << 8) | pkt[9]; - *touch = (pkt[2] & 0x40) ? 1 : 0; + dev->x = (pkt[8] << 8) | pkt[7]; + dev->y = (pkt[10] << 8) | pkt[9]; + dev->touch = (pkt[2] & 0x40) ? 1 : 0; return 1; } @@ -260,14 +263,32 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) * ITM Part */ #ifdef CONFIG_USB_TOUCHSCREEN_ITM -static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - *x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); - *y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); - *press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); - *touch = ~pkt[7] & 0x20; + int touch; + /* + * ITM devices report invalid x/y data if not touched. + * if the screen was touched before but is not touched any more + * report touch as 0 with the last valid x/y data once. then stop + * reporting data until touched again. + */ + dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); + + touch = ~pkt[7] & 0x20; + if (!touch) { + if (dev->touch) { + dev->touch = 0; + return 1; + } - return *touch; + return 0; + } + + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = touch; + + return 1; } #endif @@ -276,7 +297,7 @@ static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *pr * eTurboTouch part */ #ifdef CONFIG_USB_TOUCHSCREEN_ETURBO -static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { unsigned int shift; @@ -285,9 +306,9 @@ static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int return 0; shift = (6 - (pkt[0] & 0x03)); - *x = ((pkt[3] << 7) | pkt[4]) >> shift; - *y = ((pkt[1] << 7) | pkt[2]) >> shift; - *touch = (pkt[0] & 0x10) ? 1 : 0; + dev->x = ((pkt[3] << 7) | pkt[4]) >> shift; + dev->y = ((pkt[1] << 7) | pkt[2]) >> shift; + dev->touch = (pkt[0] & 0x10) ? 1 : 0; return 1; } @@ -307,14 +328,14 @@ static int eturbo_get_pkt_len(unsigned char *buf, int len) * Gunze part */ #ifdef CONFIG_USB_TOUCHSCREEN_GUNZE -static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80)) return 0; - *x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); - *y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); - *touch = pkt[0] & 0x20; + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->touch = pkt[0] & 0x20; return 1; } @@ -383,11 +404,11 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) } -static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - *x = ((pkt[2] & 0x03) << 8) | pkt[1]; - *y = ((pkt[4] & 0x03) << 8) | pkt[3]; - *touch = pkt[0] & 0x01; + dev->x = ((pkt[2] & 0x03) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x03) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; return 1; } @@ -492,23 +513,22 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, unsigned char *pkt, int len) { - int x, y, touch, press; struct usbtouch_device_info *type = usbtouch->type; - if (!type->read_data(pkt, &x, &y, &touch, &press)) + if (!type->read_data(usbtouch, pkt)) return; - input_report_key(usbtouch->input, BTN_TOUCH, touch); + input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); if (swap_xy) { - input_report_abs(usbtouch->input, ABS_X, y); - input_report_abs(usbtouch->input, ABS_Y, x); + input_report_abs(usbtouch->input, ABS_X, usbtouch->y); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->x); } else { - input_report_abs(usbtouch->input, ABS_X, x); - input_report_abs(usbtouch->input, ABS_Y, y); + input_report_abs(usbtouch->input, ABS_X, usbtouch->x); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->y); } if (type->max_press) - input_report_abs(usbtouch->input, ABS_PRESSURE, press); + input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press); input_sync(usbtouch->input); } diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index f538013965b003d7d622b8920e86967ce3bd8f3b..896449f0cf85b7a2f15b7ec1ece5df065319a447 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -898,7 +898,7 @@ static int ax88772_link_reset(struct usbnet *dev) static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { - int ret; + int ret, embd_phy; void *buf; u16 rx_ctl; struct asix_data *data = (struct asix_data *)&dev->data; @@ -919,13 +919,15 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0) goto out2; + /* 0x10 is the phy id of the embedded 10/100 ethernet phy */ + embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, - 1, 0, 0, buf)) < 0) { + embd_phy, 0, 0, buf)) < 0) { dbg("Select PHY #1 failed: %d", ret); goto out2; } - if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD)) < 0) + if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL)) < 0) goto out2; msleep(150); @@ -933,8 +935,14 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) goto out2; msleep(150); - if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0) - goto out2; + if (embd_phy) { + if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0) + goto out2; + } + else { + if ((ret = asix_sw_reset(dev, AX_SWRESET_PRTE)) < 0) + goto out2; + } msleep(150); rx_ctl = asix_read_rx_ctl(dev); diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index ea5f44de3de2e6aa3edbc157b394925fcb685515..a322a16d9cf8a52f0548dc2845a1b47534196801 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -379,6 +379,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) { int retval; struct net_device *net = dev->net; + struct cdc_state *info = (void *) &dev->data; union { void *buf; struct rndis_msg_hdr *header; @@ -397,7 +398,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) return -ENOMEM; retval = usbnet_generic_cdc_bind(dev, intf); if (retval < 0) - goto done; + goto fail; net->hard_header_len += sizeof (struct rndis_data_hdr); @@ -412,10 +413,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) if (unlikely(retval < 0)) { /* it might not even be an RNDIS device!! */ dev_err(&intf->dev, "RNDIS init failed, %d\n", retval); -fail: - usb_driver_release_interface(driver_of(intf), - ((struct cdc_state *)&(dev->data))->data); - goto done; + goto fail_and_release; } dev->hard_mtu = le32_to_cpu(u.init_c->max_transfer_size); /* REVISIT: peripheral "alignment" request is ignored ... */ @@ -431,7 +429,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) retval = rndis_command(dev, u.header); if (unlikely(retval < 0)) { dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval); - goto fail; + goto fail_and_release; } tmp = le32_to_cpu(u.get_c->offset); if (unlikely((tmp + 8) > (1024 - ETH_ALEN) @@ -439,7 +437,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n", tmp, le32_to_cpu(u.get_c->len)); retval = -EDOM; - goto fail; + goto fail_and_release; } memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN); @@ -455,11 +453,18 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) retval = rndis_command(dev, u.header); if (unlikely(retval < 0)) { dev_err(&intf->dev, "rndis set packet filter, %d\n", retval); - goto fail; + goto fail_and_release; } retval = 0; -done: + + kfree(u.buf); + return retval; + +fail_and_release: + usb_set_intfdata(info->data, NULL); + usb_driver_release_interface(driver_of(intf), info->data); +fail: kfree(u.buf); return retval; } diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5ca04e82ea196a491f9b20c1f1cd3e82c9c35eeb..0fed43a96871d0967f4b2d4ee7a13695ea46b2e0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -78,6 +78,7 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_PRODUCT_FUSION2 0x6300 #define OPTION_PRODUCT_COBRA 0x6500 #define OPTION_PRODUCT_COBRA2 0x6600 +#define OPTION_PRODUCT_GTMAX36 0x6701 #define HUAWEI_PRODUCT_E600 0x1001 #define HUAWEI_PRODUCT_E220 0x1003 #define AUDIOVOX_PRODUCT_AIRCARD 0x0112 @@ -90,6 +91,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, @@ -104,6 +106,7 @@ static struct usb_device_id option_ids1[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index cddef3efba0a9e770934f6d9c2a89d2e475e148f..b49f2a78189e2d7bd532020318dc9dd696a45a9f 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -197,6 +197,13 @@ UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0370, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), +/* Reported by Manuel Osdoba */ +UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452, + "Nokia", + "Nokia 6233", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + /* Reported by Alex Corcoles */ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, "Nokia", @@ -254,6 +261,18 @@ UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), #endif +/* + * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) + * Reported by Pete Zaitcev + * This device chokes on both version of MODE SENSE which we have, so + * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT. + */ +UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100, + "AMI", + "Virtual Floppy", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT), + /* Patch submitted by Philipp Friedrich */ UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, "Kyocera",