Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Fixes for big 3 drivers:

  nouveau: revert earlier MBP fix, put a dmi based MBP fix in its place
  (fixes a regression we found on some Dell eDP panels doing some
  internal testing)

  radeon: revert pll fixes, real fix is too invasive, fix scratch leak

  intel: 3 minor fixes, one for HDMI audio."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: add dmi quirk for gpio reset
  drm/radeon: Prevent leak of scratch register on resume from suspend
  Revert "drm/nv50-/gpio: initialise to vbios defaults during init"
  Revert "drm/radeon: rework pll selection (v3)"
  drm/i915: HDMI - Clear Audio Enable bit for Hot Plug
  drm/i915: Reduce a pin-leak BUG into a WARN
  drm/i915: enable lvds pin pairs before dpll on gen2

drivers/gpu/drm/i915/i915_gem.c

@@ -3242,7 +3242,8 @@ i915_gem_object_pin(struct drm_i915_gem_object *obj,
 {
 	int ret;
 
-	BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT);
+	if (WARN_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT))
+		return -EBUSY;
 
 	if (obj->gtt_space != NULL) {
 		if ((alignment && obj->gtt_offset & (alignment - 1)) ||

drivers/gpu/drm/i915/intel_display.c

@@ -4191,12 +4191,6 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
-	I915_WRITE(DPLL(pipe), dpll);
-
-	/* Wait for the clocks to stabilize. */
-	POSTING_READ(DPLL(pipe));
-	udelay(150);
-
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
@@ -4204,6 +4198,12 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 		intel_update_lvds(crtc, clock, adjusted_mode);
 
+	I915_WRITE(DPLL(pipe), dpll);
+
+	/* Wait for the clocks to stabilize. */
+	POSTING_READ(DPLL(pipe));
+	udelay(150);
+
 	/* The pixel multiplier can only be updated once the
 	 * DPLL is enabled and the clocks are stable.
 	 *

drivers/gpu/drm/i915/intel_hdmi.c

@@ -609,7 +609,7 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
 	u32 temp;
 	u32 enable_bits = SDVO_ENABLE;
 
-	if (intel_hdmi->has_audio)
+	if (intel_hdmi->has_audio || mode != DRM_MODE_DPMS_ON)
 		enable_bits |= SDVO_AUDIO_ENABLE;
 
 	temp = I915_READ(intel_hdmi->sdvox_reg);

drivers/gpu/drm/nouveau/nv50_gpio.c

@@ -22,6 +22,7 @@
  * Authors: Ben Skeggs
  */
 
+#include <linux/dmi.h>
 #include "drmP.h"
 #include "nouveau_drv.h"
 #include "nouveau_hw.h"
@@ -110,12 +111,24 @@ nv50_gpio_isr(struct drm_device *dev)
 		nv_wr32(dev, 0xe074, intr1);
 }
 
+static struct dmi_system_id gpio_reset_ids[] = {
+	{
+		.ident = "Apple Macbook 10,1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro10,1"),
+		}
+	},
+	{ }
+};
+
 int
 nv50_gpio_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
 	/* initialise gpios and routing to vbios defaults */
+	if (dmi_check_system(gpio_reset_ids))
 		nouveau_gpio_reset(dev);
 
 	/* disable, and ack any pending gpio interrupts */

drivers/gpu/drm/radeon/atombios_crtc.c

@@ -1479,98 +1479,14 @@ static void radeon_legacy_atom_fixup(struct drm_crtc *crtc)
 	}
 }
 
-/**
- * radeon_get_pll_use_mask - look up a mask of which pplls are in use
- *
- * @crtc: drm crtc
- *
- * Returns the mask of which PPLLs (Pixel PLLs) are in use.
- */
-static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_crtc *test_crtc;
-	struct radeon_crtc *radeon_test_crtc;
-	u32 pll_in_use = 0;
-
-	list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
-		if (crtc == test_crtc)
-			continue;
-
-		radeon_test_crtc = to_radeon_crtc(test_crtc);
-		if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
-			pll_in_use |= (1 << radeon_test_crtc->pll_id);
-	}
-	return pll_in_use;
-}
-
-/**
- * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
- *
- * @crtc: drm crtc
- *
- * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
- * also in DP mode.  For DP, a single PPLL can be used for all DP
- * crtcs/encoders.
- */
-static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_encoder *test_encoder;
-	struct radeon_crtc *radeon_test_crtc;
-
-	list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
-		if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
-			if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
-				/* for DP use the same PLL for all */
-				radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
-				if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
-					return radeon_test_crtc->pll_id;
-			}
-		}
-	}
-	return ATOM_PPLL_INVALID;
-}
-
-/**
- * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
- *
- * @crtc: drm crtc
- *
- * Returns the PPLL (Pixel PLL) to be used by the crtc.  For DP monitors
- * a single PPLL can be used for all DP crtcs/encoders.  For non-DP
- * monitors a dedicated PPLL must be used.  If a particular board has
- * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
- * as there is no need to program the PLL itself.  If we are not able to
- * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
- * avoid messing up an existing monitor.
- *
- * Asic specific PLL information
- *
- * DCE 6.1
- * - PPLL2 is only available to UNIPHYA (both DP and non-DP)
- * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
- *
- * DCE 6.0
- * - PPLL0 is available to all UNIPHY (DP only)
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- * DCE 5.0
- * - DCPLL is available to all UNIPHY (DP only)
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- * DCE 3.0/4.0/4.1
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- */
 static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_encoder *test_encoder;
-	u32 pll_in_use;
-	int pll;
+	struct drm_crtc *test_crtc;
+	uint32_t pll_in_use = 0;
 
 	if (ASIC_IS_DCE61(rdev)) {
 		list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
@@ -1582,40 +1498,32 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 
 				if ((test_radeon_encoder->encoder_id ==
 				     ENCODER_OBJECT_ID_INTERNAL_UNIPHY) &&
-				    (dig->linkb == false))
-					/* UNIPHY A uses PPLL2 */
+				    (dig->linkb == false)) /* UNIPHY A uses PPLL2 */
 					return ATOM_PPLL2;
-				else if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
-					/* UNIPHY B/C/D/E/F */
-					if (rdev->clock.dp_extclk)
-						/* skip PPLL programming if using ext clock */
-						return ATOM_PPLL_INVALID;
-					else {
-						/* use the same PPLL for all DP monitors */
-						pll = radeon_get_shared_dp_ppll(crtc);
-						if (pll != ATOM_PPLL_INVALID)
-							return pll;
-					}
-				}
-				break;
 			}
 		}
 		/* UNIPHY B/C/D/E/F */
-		pll_in_use = radeon_get_pll_use_mask(crtc);
-		if (!(pll_in_use & (1 << ATOM_PPLL0)))
+		list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+			struct radeon_crtc *radeon_test_crtc;
+
+			if (crtc == test_crtc)
+				continue;
+
+			radeon_test_crtc = to_radeon_crtc(test_crtc);
+			if ((radeon_test_crtc->pll_id == ATOM_PPLL0) ||
+			    (radeon_test_crtc->pll_id == ATOM_PPLL1))
+				pll_in_use |= (1 << radeon_test_crtc->pll_id);
+		}
+		if (!(pll_in_use & 4))
 			return ATOM_PPLL0;
-		if (!(pll_in_use & (1 << ATOM_PPLL1)))
 		return ATOM_PPLL1;
-		DRM_ERROR("unable to allocate a PPLL\n");
-		return ATOM_PPLL_INVALID;
 	} else if (ASIC_IS_DCE4(rdev)) {
 		list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
 			if (test_encoder->crtc && (test_encoder->crtc == crtc)) {
 				/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
 				 * depending on the asic:
 				 * DCE4: PPLL or ext clock
-				 * DCE5: PPLL, DCPLL, or ext clock
-				 * DCE6: PPLL, PPLL0, or ext clock
+				 * DCE5: DCPLL or ext clock
 				 *
 				 * Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
 				 * PPLL/DCPLL programming and only program the DP DTO for the
@@ -1623,34 +1531,31 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 				 */
 				if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
 					if (rdev->clock.dp_extclk)
-						/* skip PPLL programming if using ext clock */
 						return ATOM_PPLL_INVALID;
 					else if (ASIC_IS_DCE6(rdev))
-						/* use PPLL0 for all DP */
 						return ATOM_PPLL0;
 					else if (ASIC_IS_DCE5(rdev))
-						/* use DCPLL for all DP */
 						return ATOM_DCPLL;
-					else {
-						/* use the same PPLL for all DP monitors */
-						pll = radeon_get_shared_dp_ppll(crtc);
-						if (pll != ATOM_PPLL_INVALID)
-							return pll;
 				}
 			}
-				break;
 		}
+
+		/* otherwise, pick one of the plls */
+		list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+			struct radeon_crtc *radeon_test_crtc;
+
+			if (crtc == test_crtc)
+				continue;
+
+			radeon_test_crtc = to_radeon_crtc(test_crtc);
+			if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
+			    (radeon_test_crtc->pll_id <= ATOM_PPLL2))
+				pll_in_use |= (1 << radeon_test_crtc->pll_id);
 		}
-		/* all other cases */
-		pll_in_use = radeon_get_pll_use_mask(crtc);
-		if (!(pll_in_use & (1 << ATOM_PPLL2)))
-			return ATOM_PPLL2;
-		if (!(pll_in_use & (1 << ATOM_PPLL1)))
+		if (!(pll_in_use & 1))
 			return ATOM_PPLL1;
-		DRM_ERROR("unable to allocate a PPLL\n");
-		return ATOM_PPLL_INVALID;
+		return ATOM_PPLL2;
 	} else
-		/* use PPLL1 or PPLL2 */
 		return radeon_crtc->crtc_id;
 
 }
@@ -1792,7 +1697,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc)
 		break;
 	}
 done:
-	radeon_crtc->pll_id = ATOM_PPLL_INVALID;
+	radeon_crtc->pll_id = -1;
 }
 
 static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
@@ -1841,6 +1746,6 @@ void radeon_atombios_init_crtc(struct drm_device *dev,
 		else
 			radeon_crtc->crtc_offset = 0;
 	}
-	radeon_crtc->pll_id = ATOM_PPLL_INVALID;
+	radeon_crtc->pll_id = -1;
 	drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
 }

drivers/gpu/drm/radeon/r100.c

@@ -1182,7 +1182,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
 	ring->ready = true;
 	radeon_ttm_set_active_vram_size(rdev, rdev->mc.real_vram_size);
 
-	if (radeon_ring_supports_scratch_reg(rdev, ring)) {
+	if (!ring->rptr_save_reg /* not resuming from suspend */
+	    && radeon_ring_supports_scratch_reg(rdev, ring)) {
 		r = radeon_scratch_get(rdev, &ring->rptr_save_reg);
 		if (r) {
 			DRM_ERROR("failed to get scratch reg for rptr save (%d).\n", r);