[PATCH] I2C: Missing space in split strings

A few split string in i2c (and now hwmon) drivers lack a joining space,
causing them to display incorrectly. This trivial patch fixes that up.
Please apply, thanks.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/hwmon/adm1026.c

@@ -393,7 +393,7 @@ void adm1026_init_client(struct i2c_client *client)
 
 	value = data->config3;
 	if (data->config3 & CFG3_GPIO16_ENABLE) {
-		dev_dbg(&client->dev, "GPIO16 enabled.  THERM"
+		dev_dbg(&client->dev, "GPIO16 enabled.  THERM "
 			"pin disabled.\n");
 	} else {
 		dev_dbg(&client->dev, "THERM pin enabled.  "

drivers/hwmon/max1619.c

@@ -363,7 +363,7 @@ static void __exit sensors_max1619_exit(void)
 	i2c_del_driver(&max1619_driver);
 }
 
-MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
 	"Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("MAX1619 sensor driver");
 MODULE_LICENSE("GPL");

drivers/hwmon/pc87360.c

@@ -1043,7 +1043,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
 	if (init >= 2 && data->innr) {
 		reg = pc87360_read_value(data, LD_IN, NO_BANK,
 					 PC87365_REG_IN_CONVRATE);
-		dev_info(&client->dev, "VLM conversion set to"
+		dev_info(&client->dev, "VLM conversion set to "
 			 "1s period, 160us delay\n");
 		pc87360_write_value(data, LD_IN, NO_BANK,
 				    PC87365_REG_IN_CONVRATE,

drivers/i2c/busses/i2c-i801.c

@@ -137,7 +137,7 @@ static int i801_setup(struct pci_dev *dev)
 		pci_read_config_word(I801_dev, SMBBA, &i801_smba);
 		i801_smba &= 0xfff0;
 		if(i801_smba == 0) {
-			dev_err(&dev->dev, "SMB base address uninitialized"
+			dev_err(&dev->dev, "SMB base address uninitialized "
 				"- upgrade BIOS or use force_addr=0xaddr\n");
 			return -ENODEV;
 		}
@@ -186,7 +186,7 @@ static int i801_transaction(void)
 	int result = 0;
 	int timeout = 0;
 
-	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
 		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
 		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
 		inb_p(SMBHSTDAT1));
@@ -240,7 +240,7 @@ static int i801_transaction(void)
 		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
 
 	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
 			"(%02x)\n", temp);
 	}
 	dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "