Merge branch 'for-next' of git://gitorious.org/usb/usb into usb-next

* 'for-next' of git://gitorious.org/usb/usb:
  usb: musb: gadget: prevent a NULL pointer dereference
  usb: musb: add names for IRQs in structure resource
  usb: musb: remove board_data parameter from musb_platform_init()

arch/arm/mach-davinci/usb.c

@@ -64,10 +64,12 @@ static struct resource usb_resources[] = {
 	{
 		.start          = IRQ_USBINT,
 		.flags          = IORESOURCE_IRQ,
+		.name		= "mc"
 	},
 	{
 		/* placeholder for the dedicated CPPI IRQ */
 		.flags          = IORESOURCE_IRQ,
+		.name		= "dma"
 	},
 };
 

arch/arm/mach-omap2/usb-musb.c

@@ -40,10 +40,12 @@ static struct resource musb_resources[] = {
 	[1] = {	/* general IRQ */
 		.start	= INT_243X_HS_USB_MC,
 		.flags	= IORESOURCE_IRQ,
+		.name	= "mc",
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= INT_243X_HS_USB_DMA,
 		.flags	= IORESOURCE_IRQ,
+		.name	= "dma",
 	},
 };
 

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -82,11 +82,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -46,11 +46,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -86,11 +86,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 

arch/blackfin/mach-bf548/boards/cm_bf548.c

@@ -482,11 +482,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -587,11 +587,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 

drivers/usb/musb/blackfin.c

@@ -323,7 +323,7 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
 {
 
 	/*

drivers/usb/musb/cppi_dma.c

@@ -1308,7 +1308,7 @@ dma_controller_create(struct musb *musb, void __iomem *mregs)
 	struct cppi		*controller;
 	struct device		*dev = musb->controller;
 	struct platform_device	*pdev = to_platform_device(dev);
-	int			irq = platform_get_irq(pdev, 1);
+	int			irq = platform_get_irq_byname(pdev, "dma");
 
 	controller = kzalloc(sizeof *controller, GFP_KERNEL);
 	if (!controller)

drivers/usb/musb/davinci.c

@@ -376,7 +376,7 @@ int musb_platform_set_mode(struct musb *musb, u8 mode)
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
 {
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;

drivers/usb/musb/musb_core.c

@@ -2025,7 +2025,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
 	 */
 	musb->isr = generic_interrupt;
-	status = musb_platform_init(musb, plat->board_data);
+	status = musb_platform_init(musb);
 	if (status < 0)
 		goto fail2;
 
@@ -2206,7 +2206,7 @@ static u64	*orig_dma_mask;
 static int __init musb_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
-	int		irq = platform_get_irq(pdev, 0);
+	int		irq = platform_get_irq_byname(pdev, "mc");
 	int		status;
 	struct resource	*iomem;
 	void __iomem	*base;

drivers/usb/musb/musb_core.h

@@ -614,7 +614,7 @@ extern int musb_platform_get_vbus_status(struct musb *musb);
 #define musb_platform_get_vbus_status(x)	0
 #endif
 
-extern int __init musb_platform_init(struct musb *musb, void *board_data);
+extern int __init musb_platform_init(struct musb *musb);
 extern int musb_platform_exit(struct musb *musb);
 
 #endif	/* __MUSB_CORE_H__ */

drivers/usb/musb/musb_gadget.c

@@ -1072,12 +1072,15 @@ struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	struct musb_request	*request = NULL;
 
 	request = kzalloc(sizeof *request, gfp_flags);
-	if (request) {
+	if (!request) {
+		DBG(4, "not enough memory\n");
+		return NULL;
+	}
+
 	INIT_LIST_HEAD(&request->request.list);
 	request->request.dma = DMA_ADDR_INVALID;
 	request->epnum = musb_ep->current_epnum;
 	request->ep = musb_ep;
-	}
 
 	return &request->request;
 }

drivers/usb/musb/musbhsdma.c

@@ -363,7 +363,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
 	struct musb_dma_controller *controller;
 	struct device *dev = musb->controller;
 	struct platform_device *pdev = to_platform_device(dev);
-	int irq = platform_get_irq(pdev, 1);
+	int irq = platform_get_irq_byname(pdev, "dma");
 
 	if (irq == 0) {
 		dev_err(dev, "No DMA interrupt line!\n");

drivers/usb/musb/omap2430.c

@@ -187,10 +187,12 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
 {
 	u32 l;
-	struct omap_musb_board_data *data = board_data;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
 
 	/* We require some kind of external transceiver, hooked
 	 * up through ULPI.  TWL4030-family PMICs include one,

drivers/usb/musb/tusb6010.c

@@ -1091,7 +1091,7 @@ static int __init tusb_start(struct musb *musb)
 	return -ENODEV;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+int __init musb_platform_init(struct musb *musb)
 {
 	struct platform_device	*pdev;
 	struct resource		*mem;