提交 34ce71a9 编写于 作者: A Alexandre Belloni 提交者: Takashi Iwai

ALSA: timer: remove legacy rtctimer

There are no users of rtctimer left. Remove its code as this is the
in-kernel user of the legacy PC RTC driver that will hopefully be removed
at some point.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 b610386c
......@@ -672,7 +672,7 @@ enum {
/* global timers (device member) */
#define SNDRV_TIMER_GLOBAL_SYSTEM 0
#define SNDRV_TIMER_GLOBAL_RTC 1
#define SNDRV_TIMER_GLOBAL_RTC 1 /* unused */
#define SNDRV_TIMER_GLOBAL_HPET 2
#define SNDRV_TIMER_GLOBAL_HRTIMER 3
......
......@@ -141,35 +141,6 @@ config SND_SEQ_HRTIMER_DEFAULT
Say Y here to use the HR-timer backend as the default sequencer
timer.
config SND_RTCTIMER
tristate "RTC Timer support"
depends on RTC
select SND_TIMER
help
Say Y here to enable RTC timer support for ALSA. ALSA uses
the RTC timer as a precise timing source and maps the RTC
timer to ALSA's timer interface. The ALSA sequencer code also
can use this timing source.
To compile this driver as a module, choose M here: the module
will be called snd-rtctimer.
Note that this option is exclusive with the new RTC drivers
(CONFIG_RTC_CLASS) since this requires the old API.
config SND_SEQ_RTCTIMER_DEFAULT
bool "Use RTC as default sequencer timer"
depends on SND_RTCTIMER && SND_SEQUENCER
depends on !SND_SEQ_HRTIMER_DEFAULT
default y
help
Say Y here to use the RTC timer as the default sequencer
timer. This is strongly recommended because it ensures
precise MIDI timing even when the system timer runs at less
than 1000 Hz.
If in doubt, say Y.
config SND_DYNAMIC_MINORS
bool "Dynamic device file minor numbers"
help
......
......@@ -37,7 +37,6 @@ obj-$(CONFIG_SND) += snd.o
obj-$(CONFIG_SND_HWDEP) += snd-hwdep.o
obj-$(CONFIG_SND_TIMER) += snd-timer.o
obj-$(CONFIG_SND_HRTIMER) += snd-hrtimer.o
obj-$(CONFIG_SND_RTCTIMER) += snd-rtctimer.o
obj-$(CONFIG_SND_PCM) += snd-pcm.o
obj-$(CONFIG_SND_DMAENGINE_PCM) += snd-pcm-dmaengine.o
obj-$(CONFIG_SND_RAWMIDI) += snd-rawmidi.o
......
/*
* RTC based high-frequency timer
*
* Copyright (C) 2000 Takashi Iwai
* based on rtctimer.c by Steve Ratcliffe
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/log2.h>
#include <sound/core.h>
#include <sound/timer.h>
#if IS_ENABLED(CONFIG_RTC)
#include <linux/mc146818rtc.h>
#define RTC_FREQ 1024 /* default frequency */
#define NANO_SEC 1000000000L /* 10^9 in sec */
/*
* prototypes
*/
static int rtctimer_open(struct snd_timer *t);
static int rtctimer_close(struct snd_timer *t);
static int rtctimer_start(struct snd_timer *t);
static int rtctimer_stop(struct snd_timer *t);
/*
* The hardware dependent description for this timer.
*/
static struct snd_timer_hardware rtc_hw = {
.flags = SNDRV_TIMER_HW_AUTO |
SNDRV_TIMER_HW_FIRST |
SNDRV_TIMER_HW_TASKLET,
.ticks = 100000000L, /* FIXME: XXX */
.open = rtctimer_open,
.close = rtctimer_close,
.start = rtctimer_start,
.stop = rtctimer_stop,
};
static int rtctimer_freq = RTC_FREQ; /* frequency */
static struct snd_timer *rtctimer;
static struct tasklet_struct rtc_tasklet;
static rtc_task_t rtc_task;
static int
rtctimer_open(struct snd_timer *t)
{
int err;
err = rtc_register(&rtc_task);
if (err < 0)
return err;
t->private_data = &rtc_task;
return 0;
}
static int
rtctimer_close(struct snd_timer *t)
{
rtc_task_t *rtc = t->private_data;
if (rtc) {
rtc_unregister(rtc);
tasklet_kill(&rtc_tasklet);
t->private_data = NULL;
}
return 0;
}
static int
rtctimer_start(struct snd_timer *timer)
{
rtc_task_t *rtc = timer->private_data;
if (snd_BUG_ON(!rtc))
return -EINVAL;
rtc_control(rtc, RTC_IRQP_SET, rtctimer_freq);
rtc_control(rtc, RTC_PIE_ON, 0);
return 0;
}
static int
rtctimer_stop(struct snd_timer *timer)
{
rtc_task_t *rtc = timer->private_data;
if (snd_BUG_ON(!rtc))
return -EINVAL;
rtc_control(rtc, RTC_PIE_OFF, 0);
return 0;
}
static void rtctimer_tasklet(unsigned long data)
{
snd_timer_interrupt((struct snd_timer *)data, 1);
}
/*
* interrupt
*/
static void rtctimer_interrupt(void *private_data)
{
tasklet_schedule(private_data);
}
/*
* ENTRY functions
*/
static int __init rtctimer_init(void)
{
int err;
struct snd_timer *timer;
if (rtctimer_freq < 2 || rtctimer_freq > 8192 ||
!is_power_of_2(rtctimer_freq)) {
pr_err("ALSA: rtctimer: invalid frequency %d\n", rtctimer_freq);
return -EINVAL;
}
/* Create a new timer and set up the fields */
err = snd_timer_global_new("rtc", SNDRV_TIMER_GLOBAL_RTC, &timer);
if (err < 0)
return err;
timer->module = THIS_MODULE;
strcpy(timer->name, "RTC timer");
timer->hw = rtc_hw;
timer->hw.resolution = NANO_SEC / rtctimer_freq;
tasklet_init(&rtc_tasklet, rtctimer_tasklet, (unsigned long)timer);
/* set up RTC callback */
rtc_task.func = rtctimer_interrupt;
rtc_task.private_data = &rtc_tasklet;
err = snd_timer_global_register(timer);
if (err < 0) {
snd_timer_global_free(timer);
return err;
}
rtctimer = timer; /* remember this */
return 0;
}
static void __exit rtctimer_exit(void)
{
if (rtctimer) {
snd_timer_global_free(rtctimer);
rtctimer = NULL;
}
}
/*
* exported stuff
*/
module_init(rtctimer_init)
module_exit(rtctimer_exit)
module_param(rtctimer_freq, int, 0444);
MODULE_PARM_DESC(rtctimer_freq, "timer frequency in Hz");
MODULE_LICENSE("GPL");
MODULE_ALIAS("snd-timer-" __stringify(SNDRV_TIMER_GLOBAL_RTC));
#endif /* IS_ENABLED(CONFIG_RTC) */
......@@ -47,8 +47,6 @@ int seq_default_timer_card = -1;
int seq_default_timer_device =
#ifdef CONFIG_SND_SEQ_HRTIMER_DEFAULT
SNDRV_TIMER_GLOBAL_HRTIMER
#elif defined(CONFIG_SND_SEQ_RTCTIMER_DEFAULT)
SNDRV_TIMER_GLOBAL_RTC
#else
SNDRV_TIMER_GLOBAL_SYSTEM
#endif
......
......@@ -37,8 +37,6 @@
#if IS_ENABLED(CONFIG_SND_HRTIMER)
#define DEFAULT_TIMER_LIMIT 4
#elif IS_ENABLED(CONFIG_SND_RTCTIMER)
#define DEFAULT_TIMER_LIMIT 2
#else
#define DEFAULT_TIMER_LIMIT 1
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册