提交 3380557f 编写于 作者: A Andreas Böhler 提交者: Miquel Raynal

mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash

The Toshiba TC58NVG0S3HTA00 is detected with 64 byte OOB while the flash
has 128 bytes OOB. This adds a static NAND ID entry to correct this.

Tested on FRITZ!Box 7530 flashed with OpenWrt.
Signed-off-by: NAndreas Böhler <dev@aboehler.at>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220420104034.6333-1-dev@aboehler.at
上级 f4c5c7f9
...@@ -29,6 +29,9 @@ struct nand_flash_dev nand_flash_ids[] = { ...@@ -29,6 +29,9 @@ struct nand_flash_dev nand_flash_ids[] = {
{"TC58NVG0S3E 1G 3.3V 8-bit", {"TC58NVG0S3E 1G 3.3V 8-bit",
{ .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} }, { .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} },
SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), }, SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), },
{"TC58NVG0S3HTA00 1G 3.3V 8-bit",
{ .id = {0x98, 0xf1, 0x80, 0x15} },
SZ_2K, SZ_128, SZ_128K, 0, 4, 128, NAND_ECC_INFO(8, SZ_512), },
{"TC58NVG2S0F 4G 3.3V 8-bit", {"TC58NVG2S0F 4G 3.3V 8-bit",
{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} }, { .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) }, SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册