ARM: S3C24XX: Wrapper s3c2410_gpio_setpin and s3c2410_gpio_pullup()

Change s3c2410_gpio_setpin() and s3c2410_gpio_pullup() to use
the new s3c_ gpio configuration calls until all their users
are converted.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

arch/arm/plat-s3c24xx/gpio.c

 /* linux/arch/arm/plat-s3c24xx/gpio.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX GPIO support
@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -33,44 +34,34 @@
 
 #include <mach/regs-gpio.h>
 
+/* gpiolib wrappers until these are totally eliminated */
+
 void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long up;
+	int ret;
 
-	if (pin < S3C2410_GPIO_BANKB)
-		return;
+	WARN_ON(to);	/* should be none of these left */
 
-	local_irq_save(flags);
-
-	up = __raw_readl(base + 0x08);
-	up &= ~(1L << offs);
-	up |= to << offs;
-	__raw_writel(up, base + 0x08);
+	if (!to) {
+		/* if pull is enabled, try first with up, and if that
+		 * fails, try using down */
 
-	local_irq_restore(flags);
+		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
+		if (ret)
+			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
+	} else {
+		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
+	}
 }
-
 EXPORT_SYMBOL(s3c2410_gpio_pullup);
 
-
 void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long dat;
+	/* do this via gpiolib until all users removed */
 
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offs);
-	dat |= to << offs;
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
+	gpio_request(pin, "temporary");
+	gpio_set_value(pin, to);
+	gpio_free(pin);
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_setpin);