[SCSI] be2iscsi: Update external Branding to Emulex

Change MODULE_AUTHOR, driver name and other external print strings from
Serverengines to Emulex.
Signed-off-by: NMinh Tran <MinhDuc.Tran@Emulex.Com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/be2iscsi/be_cmds.h

@@ -23,7 +23,7 @@
  * firmware in the BE. These requests are communicated to the processor
  * using Work Request Blocks (WRBs) submitted to the MCC-WRB ring or via one
  * WRB inside a MAILBOX.
- * The commands are serviced by the ARM processor in the BladeEngine's MPU.
+ * The commands are serviced by the ARM processor in the OneConnect's MPU.
  */
 struct be_sge {
 	u32 pa_lo;

drivers/scsi/be2iscsi/be_main.c

@@ -48,7 +48,7 @@ static unsigned int num_hba = 0;
 
 MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
 MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR);
-MODULE_AUTHOR("ServerEngines Corporation");
+MODULE_AUTHOR("Emulex Corporation");
 MODULE_LICENSE("GPL");
 module_param(be_iopoll_budget, int, 0);
 module_param(enable_msix, int, 0);
@@ -391,7 +391,7 @@ MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
 
 static struct scsi_host_template beiscsi_sht = {
 	.module = THIS_MODULE,
-	.name = "ServerEngines 10Gbe open-iscsi Initiator Driver",
+	.name = "Emulex 10Gbe open-iscsi Initiator Driver",
 	.proc_name = DRV_NAME,
 	.queuecommand = iscsi_queuecommand,
 	.change_queue_depth = iscsi_change_queue_depth,

drivers/scsi/be2iscsi/be_main.h

@@ -35,8 +35,8 @@
 #include "be.h"
 #define DRV_NAME		"be2iscsi"
 #define BUILD_STR		"4.1.239.0"
-#define BE_NAME			"ServerEngines BladeEngine2" \
-				"Linux iSCSI Driver version" BUILD_STR
+#define BE_NAME			"Emulex OneConnect" \
+				"Open-iSCSI Driver version" BUILD_STR
 #define DRV_DESC		BE_NAME " " "Driver"
 
 #define BE_VENDOR_ID		0x19A2