USB: goku_udc trivial cleanups

Minor fixes to goku_udc ... whitespace, let -DDEBUG do its thing,
check the return value of device_register(), sparse tweaks.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/goku_udc.c

@@ -20,7 +20,6 @@
  *  - DMA works with ep1 (OUT transfers) and ep2 (IN transfers).
  */
 
-#undef DEBUG
 // #define	VERBOSE		/* extra debug messages (success too) */
 // #define	USB_TRACE	/* packet-level success messages */
 
@@ -440,7 +439,7 @@ static int read_fifo(struct goku_ep *ep, struct goku_request *req)
 			/* use ep1/ep2 double-buffering for OUT */
 			if (!(size & PACKET_ACTIVE))
 				size = readl(&regs->EPxSizeLB[ep->num]);
-			if (!(size & PACKET_ACTIVE)) 	// "can't happen"
+			if (!(size & PACKET_ACTIVE))	/* "can't happen" */
 				break;
 			size &= DATASIZE;	/* EPxSizeH == 0 */
 
@@ -1092,17 +1091,17 @@ udc_proc_read(char *buffer, char **start, off_t off, int count,
 		is_usb_connected
 			? ((tmp & PW_PULLUP) ? "full speed" : "powered")
 			: "disconnected",
-		({char *tmp;
+		({char *state;
 		switch(dev->ep0state){
-		case EP0_DISCONNECT:	tmp = "ep0_disconnect"; break;
-		case EP0_IDLE:		tmp = "ep0_idle"; break;
-		case EP0_IN:		tmp = "ep0_in"; break;
-		case EP0_OUT:		tmp = "ep0_out"; break;
-		case EP0_STATUS:	tmp = "ep0_status"; break;
-		case EP0_STALL:		tmp = "ep0_stall"; break;
-		case EP0_SUSPEND:	tmp = "ep0_suspend"; break;
-		default:		tmp = "ep0_?"; break;
-		} tmp; })
+		case EP0_DISCONNECT:	state = "ep0_disconnect"; break;
+		case EP0_IDLE:		state = "ep0_idle"; break;
+		case EP0_IN:		state = "ep0_in"; break;
+		case EP0_OUT:		state = "ep0_out"; break;
+		case EP0_STATUS:	state = "ep0_status"; break;
+		case EP0_STALL:		state = "ep0_stall"; break;
+		case EP0_SUSPEND:	state = "ep0_suspend"; break;
+		default:		state = "ep0_?"; break;
+		} state; })
 		);
 	size -= t;
 	next += t;
@@ -1147,7 +1146,6 @@ udc_proc_read(char *buffer, char **start, off_t off, int count,
 	for (i = 0; i < 4; i++) {
 		struct goku_ep		*ep = &dev->ep [i];
 		struct goku_request	*req;
-		int			t;
 
 		if (i && !ep->desc)
 			continue;
@@ -1848,8 +1846,8 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* done */
 	the_controller = dev;
-	device_register(&dev->gadget.dev);
-
+	retval = device_register(&dev->gadget.dev);
+	if (retval == 0)
 		return 0;
 
 done:

drivers/usb/gadget/goku_udc.h

@@ -41,8 +41,10 @@ struct goku_udc_regs {
 #define INT_SYSERROR		0x40000
 #define INT_PWRDETECT		0x80000
 
-#define	INT_DEVWIDE		(INT_PWRDETECT|INT_SYSERROR/*|INT_ERR*/|INT_USBRESET|INT_SUSPEND)
-#define	INT_EP0 		(INT_SETUP|INT_ENDPOINT0/*|INT_STATUS*/|INT_STATUSNAK)
+#define	INT_DEVWIDE \
+	(INT_PWRDETECT|INT_SYSERROR/*|INT_ERR*/|INT_USBRESET|INT_SUSPEND)
+#define	INT_EP0 \
+	(INT_SETUP|INT_ENDPOINT0/*|INT_STATUS*/|INT_STATUSNAK)
 
 	u32	dma_master;
 #define MST_EOPB_DIS		0x0800