diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index f96358b641af974334d2deaed65531ecefcc8323..ba09063260d973bff94d87e336e9bce676111279 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -36,6 +36,8 @@ #define IXGBE_82598_MAX_TX_QUEUES 32 #define IXGBE_82598_MAX_RX_QUEUES 64 #define IXGBE_82598_RAR_ENTRIES 16 +#define IXGBE_82598_MC_TBL_SIZE 128 +#define IXGBE_82598_VFT_TBL_SIZE 128 static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw); static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed, @@ -60,7 +62,9 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) { hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES; hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES; - hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES; + hw->mac.mcft_size = IXGBE_82598_MC_TBL_SIZE; + hw->mac.vft_size = IXGBE_82598_VFT_TBL_SIZE; + hw->mac.num_rar_entries = IXGBE_82598_RAR_ENTRIES; /* PHY ops are filled in by default properly for Fiber only */ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) { diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 7fd6aeb1b02151791c6d1a1a433247938d0f3b3e..a9f4d0e58e1ccda08e7b92da3b8c8f4eb2352aa6 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -661,7 +661,7 @@ s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind, static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) { u32 i; - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; /* * If the current mac address is valid, assume it is a software override @@ -705,12 +705,113 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < IXGBE_MC_TBL_SIZE; i++) + for (i = 0; i < hw->mac.mcft_size; i++) IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); return 0; } +/** + * ixgbe_add_uc_addr - Adds a secondary unicast address. + * @hw: pointer to hardware structure + * @addr: new address + * + * Adds it to unused receive address register or goes into promiscuous mode. + **/ +void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr) +{ + u32 rar_entries = hw->mac.num_rar_entries; + u32 rar; + + hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + + /* + * Place this address in the RAR if there is room, + * else put the controller into promiscuous mode + */ + if (hw->addr_ctrl.rar_used_count < rar_entries) { + rar = hw->addr_ctrl.rar_used_count - + hw->addr_ctrl.mc_addr_in_rar_count; + ixgbe_set_rar(hw, rar, addr, 0, IXGBE_RAH_AV); + hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar); + hw->addr_ctrl.rar_used_count++; + } else { + hw->addr_ctrl.overflow_promisc++; + } + + hw_dbg(hw, "ixgbe_add_uc_addr Complete\n"); +} + +/** + * ixgbe_update_uc_addr_list - Updates MAC list of secondary addresses + * @hw: pointer to hardware structure + * @addr_list: the list of new addresses + * @addr_count: number of addresses + * @next: iterator function to walk the address list + * + * The given list replaces any existing list. Clears the secondary addrs from + * receive address registers. Uses unused receive address registers for the + * first secondary addresses, and falls back to promiscuous mode as needed. + * + * Drivers using secondary unicast addresses must set user_set_promisc when + * manually putting the device into promiscuous mode. + **/ +s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, + u32 addr_count, ixgbe_mc_addr_itr next) +{ + u8 *addr; + u32 i; + u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc; + u32 uc_addr_in_use; + u32 fctrl; + u32 vmdq; + + /* + * Clear accounting of old secondary address list, + * don't count RAR[0] + */ + uc_addr_in_use = hw->addr_ctrl.rar_used_count - + hw->addr_ctrl.mc_addr_in_rar_count - 1; + hw->addr_ctrl.rar_used_count -= uc_addr_in_use; + hw->addr_ctrl.overflow_promisc = 0; + + /* Zero out the other receive addresses */ + hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use); + for (i = 1; i <= uc_addr_in_use; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); + } + + /* Add the new addresses */ + for (i = 0; i < addr_count; i++) { + hw_dbg(hw, " Adding the secondary addresses:\n"); + addr = next(hw, &addr_list, &vmdq); + ixgbe_add_uc_addr(hw, addr); + } + + if (hw->addr_ctrl.overflow_promisc) { + /* enable promisc if not already in overflow or set by user */ + if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { + hw_dbg(hw, " Entering address overflow promisc mode\n"); + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl |= IXGBE_FCTRL_UPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + } else { + /* only disable if set by overflow, not by user */ + if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { + hw_dbg(hw, " Leaving address overflow promisc mode\n"); + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl &= ~IXGBE_FCTRL_UPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + } + + hw_dbg(hw, "ixgbe_update_uc_addr_list Complete\n"); + return 0; +} + /** * ixgbe_mta_vector - Determines bit-vector in multicast table to set * @hw: pointer to hardware structure @@ -794,7 +895,7 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) **/ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) { - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n", mc_addr[0], mc_addr[1], mc_addr[2], @@ -823,7 +924,7 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) * @hw: pointer to hardware structure * @mc_addr_list: the list of new multicast addresses * @mc_addr_count: number of addresses - * @pad: number of bytes between addresses in the list + * @next: iterator function to walk the multicast address list * * The given list replaces any existing list. Clears the MC addrs from receive * address registers and the multicast table. Uses unsed receive address @@ -831,10 +932,11 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr) * multicast table. **/ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 pad) + u32 mc_addr_count, ixgbe_mc_addr_itr next) { u32 i; - u32 rar_entries = hw->mac.num_rx_addrs; + u32 rar_entries = hw->mac.num_rar_entries; + u32 vmdq; /* * Set the new number of MC addresses that we are being requested to @@ -854,14 +956,13 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, /* Clear the MTA */ hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < IXGBE_MC_TBL_SIZE; i++) + for (i = 0; i < hw->mac.mcft_size; i++) IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); /* Add the new addresses */ for (i = 0; i < mc_addr_count; i++) { hw_dbg(hw, " Adding the multicast addresses:\n"); - ixgbe_add_mc_addr(hw, mc_addr_list + - (i * (IXGBE_ETH_LENGTH_OF_ADDRESS + pad))); + ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq)); } /* Enable mta */ @@ -884,11 +985,11 @@ static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) u32 offset; u32 vlanbyte; - for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++) + for (offset = 0; offset < hw->mac.vft_size; offset++) IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) - for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++) + for (offset = 0; offset < hw->mac.vft_size; offset++) IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), 0); diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index de6ddd5d04ada831cb7c958d00f885c74af85977..c75ecba9ccda46c2fa74fdc8576346749749bb4e 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -47,7 +47,9 @@ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val); s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind, u32 enable_addr); s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 pad); + u32 mc_addr_count, ixgbe_mc_addr_itr next); +s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *uc_addr_list, + u32 mc_addr_count, ixgbe_mc_addr_itr next); s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on); s32 ixgbe_validate_mac_addr(u8 *mac_addr); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index b14192f369db49b22b96428132bf8667d7fa0ce0..87ef2db8c4301ab49c992d176a5a5069d8164ef7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1619,23 +1619,37 @@ static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) } } +static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq) +{ + struct dev_mc_list *mc_ptr; + u8 *addr = *mc_addr_ptr; + *vmdq = 0; + + mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]); + if (mc_ptr->next) + *mc_addr_ptr = mc_ptr->next->dmi_addr; + else + *mc_addr_ptr = NULL; + + return addr; +} + /** - * ixgbe_set_multi - Multicast and Promiscuous mode set + * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set * @netdev: network interface device structure * - * The set_multi entry point is called whenever the multicast address - * list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper multicast, - * promiscuous mode, and all-multi behavior. + * The set_rx_method entry point is called whenever the unicast/multicast + * address list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast and + * promiscuous mode. **/ -static void ixgbe_set_multi(struct net_device *netdev) +static void ixgbe_set_rx_mode(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; - struct dev_mc_list *mc_ptr; - u8 *mta_list; u32 fctrl, vlnctrl; - int i; + u8 *addr_list = NULL; + int addr_count = 0; /* Check for Promiscuous and All Multicast modes */ @@ -1643,6 +1657,7 @@ static void ixgbe_set_multi(struct net_device *netdev) vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); if (netdev->flags & IFF_PROMISC) { + hw->addr_ctrl.user_set_promisc = 1; fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); vlnctrl &= ~IXGBE_VLNCTRL_VFE; } else { @@ -1653,33 +1668,25 @@ static void ixgbe_set_multi(struct net_device *netdev) fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); } vlnctrl |= IXGBE_VLNCTRL_VFE; + hw->addr_ctrl.user_set_promisc = 0; } IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); - if (netdev->mc_count) { - mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC); - if (!mta_list) - return; - - /* Shared function expects packed array of only addresses. */ - mc_ptr = netdev->mc_list; - - for (i = 0; i < netdev->mc_count; i++) { - if (!mc_ptr) - break; - memcpy(mta_list + (i * ETH_ALEN), mc_ptr->dmi_addr, - ETH_ALEN); - mc_ptr = mc_ptr->next; - } - - ixgbe_update_mc_addr_list(hw, mta_list, i, 0); - kfree(mta_list); - } else { - ixgbe_update_mc_addr_list(hw, NULL, 0, 0); - } + /* reprogram secondary unicast list */ + addr_count = netdev->uc_count; + if (addr_count) + addr_list = netdev->uc_list->dmi_addr; + ixgbe_update_uc_addr_list(hw, addr_list, addr_count, + ixgbe_addr_list_itr); + /* reprogram multicast list */ + addr_count = netdev->mc_count; + if (addr_count) + addr_list = netdev->mc_list->dmi_addr; + ixgbe_update_mc_addr_list(hw, addr_list, addr_count, + ixgbe_addr_list_itr); } static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter) @@ -1723,7 +1730,7 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) struct net_device *netdev = adapter->netdev; int i; - ixgbe_set_multi(netdev); + ixgbe_set_rx_mode(netdev); ixgbe_restore_vlan(adapter); @@ -3508,7 +3515,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netdev->stop = &ixgbe_close; netdev->hard_start_xmit = &ixgbe_xmit_frame; netdev->get_stats = &ixgbe_get_stats; - netdev->set_multicast_list = &ixgbe_set_multi; + netdev->set_rx_mode = &ixgbe_set_rx_mode; + netdev->set_multicast_list = &ixgbe_set_rx_mode; netdev->set_mac_address = &ixgbe_set_mac; netdev->change_mtu = &ixgbe_change_mtu; ixgbe_set_ethtool_ops(netdev); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 781f137deccfe7c73ccb9f50deb902195d7292e7..2f4d34e6729fa0cd8157c9156f9f8be62a84e7cb 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -822,10 +822,6 @@ #define IXGBE_RAH_VIND_SHIFT 18 #define IXGBE_RAH_AV 0x80000000 -/* Filters */ -#define IXGBE_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ -#define IXGBE_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ - /* Header split receive */ #define IXGBE_RFCTL_ISCSI_DIS 0x00000001 #define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E @@ -1167,6 +1163,8 @@ struct ixgbe_addr_filter_info { u32 rar_used_count; u32 mc_addr_in_rar_count; u32 mta_in_use; + u32 overflow_promisc; + bool user_set_promisc; }; /* Flow control parameters */ @@ -1242,6 +1240,10 @@ struct ixgbe_hw_stats { /* forward declaration */ struct ixgbe_hw; +/* iterator type for walking multicast address lists */ +typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr, + u32 *vmdq); + struct ixgbe_mac_operations { s32 (*reset)(struct ixgbe_hw *); enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); @@ -1263,9 +1265,11 @@ struct ixgbe_mac_info { u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; s32 mc_filter_type; + u32 mcft_size; + u32 vft_size; + u32 num_rar_entries; u32 num_rx_queues; u32 num_tx_queues; - u32 num_rx_addrs; u32 link_attach_type; u32 link_mode_select; bool link_settings_loaded;