提交 2aec609f 编写于 作者: D David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:

	net/netfilter/nf_conntrack_proto_tcp.c
......@@ -148,9 +148,9 @@ tcp_available_congestion_control - STRING
but not loaded.
tcp_base_mss - INTEGER
The initial value of search_low to be used by Packetization Layer
Path MTU Discovery (MTU probing). If MTU probing is enabled,
this is the inital MSS used by the connection.
The initial value of search_low to be used by the packetization layer
Path MTU discovery (MTU probing). If MTU probing is enabled,
this is the initial MSS used by the connection.
tcp_congestion_control - STRING
Set the congestion control algorithm to be used for new
......@@ -186,9 +186,8 @@ tcp_frto - INTEGER
where packet loss is typically due to random radio interference
rather than intermediate router congestion. F-RTO is sender-side
only modification. Therefore it does not require any support from
the peer, but in a typical case, however, where wireless link is
the local access link and most of the data flows downlink, the
faraway servers should have F-RTO enabled to take advantage of it.
the peer.
If set to 1, basic version is enabled. 2 enables SACK enhanced
F-RTO if flow uses SACK. The basic version can be used also when
SACK is in use though scenario(s) with it exists where F-RTO
......@@ -276,7 +275,7 @@ tcp_mem - vector of 3 INTEGERs: min, pressure, max
memory.
tcp_moderate_rcvbuf - BOOLEAN
If set, TCP performs receive buffer autotuning, attempting to
If set, TCP performs receive buffer auto-tuning, attempting to
automatically size the buffer (no greater than tcp_rmem[2]) to
match the size required by the path for full throughput. Enabled by
default.
......@@ -336,7 +335,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
pressure.
Default: 8K
default: default size of receive buffer used by TCP sockets.
default: initial size of receive buffer used by TCP sockets.
This value overrides net.core.rmem_default used by other protocols.
Default: 87380 bytes. This value results in window of 65535 with
default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
......@@ -344,8 +343,10 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
max: maximal size of receive buffer allowed for automatically
selected receiver buffers for TCP socket. This value does not override
net.core.rmem_max, "static" selection via SO_RCVBUF does not use this.
Default: 87380*2 bytes.
net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables
automatic tuning of that socket's receive buffer size, in which
case this value is ignored.
Default: between 87380B and 4MB, depending on RAM size.
tcp_sack - BOOLEAN
Enable select acknowledgments (SACKS).
......@@ -358,7 +359,7 @@ tcp_slow_start_after_idle - BOOLEAN
Default: 1
tcp_stdurg - BOOLEAN
Use the Host requirements interpretation of the TCP urg pointer field.
Use the Host requirements interpretation of the TCP urgent pointer field.
Most hosts use the older BSD interpretation, so if you turn this on
Linux might not communicate correctly with them.
Default: FALSE
......@@ -371,12 +372,12 @@ tcp_synack_retries - INTEGER
tcp_syncookies - BOOLEAN
Only valid when the kernel was compiled with CONFIG_SYNCOOKIES
Send out syncookies when the syn backlog queue of a socket
overflows. This is to prevent against the common 'syn flood attack'
overflows. This is to prevent against the common 'SYN flood attack'
Default: FALSE
Note, that syncookies is fallback facility.
It MUST NOT be used to help highly loaded servers to stand
against legal connection rate. If you see synflood warnings
against legal connection rate. If you see SYN flood warnings
in your logs, but investigation shows that they occur
because of overload with legal connections, you should tune
another parameters until this warning disappear.
......@@ -386,7 +387,7 @@ tcp_syncookies - BOOLEAN
to use TCP extensions, can result in serious degradation
of some services (f.e. SMTP relaying), visible not by you,
but your clients and relays, contacting you. While you see
synflood warnings in logs not being really flooded, your server
SYN flood warnings in logs not being really flooded, your server
is seriously misconfigured.
tcp_syn_retries - INTEGER
......@@ -419,19 +420,21 @@ tcp_window_scaling - BOOLEAN
Enable window scaling as defined in RFC1323.
tcp_wmem - vector of 3 INTEGERs: min, default, max
min: Amount of memory reserved for send buffers for TCP socket.
min: Amount of memory reserved for send buffers for TCP sockets.
Each TCP socket has rights to use it due to fact of its birth.
Default: 4K
default: Amount of memory allowed for send buffers for TCP socket
by default. This value overrides net.core.wmem_default used
by other protocols, it is usually lower than net.core.wmem_default.
default: initial size of send buffer used by TCP sockets. This
value overrides net.core.wmem_default used by other protocols.
It is usually lower than net.core.wmem_default.
Default: 16K
max: Maximal amount of memory allowed for automatically selected
send buffers for TCP socket. This value does not override
net.core.wmem_max, "static" selection via SO_SNDBUF does not use this.
Default: 128K
max: Maximal amount of memory allowed for automatically tuned
send buffers for TCP sockets. This value does not override
net.core.wmem_max. Calling setsockopt() with SO_SNDBUF disables
automatic tuning of that socket's send buffer size, in which case
this value is ignored.
Default: between 64K and 4MB, depending on RAM size.
tcp_workaround_signed_windows - BOOLEAN
If set, assume no receipt of a window scaling option means the
......@@ -1073,24 +1076,193 @@ bridge-nf-filter-pppoe-tagged - BOOLEAN
Default: 1
UNDOCUMENTED:
proc/sys/net/sctp/* Variables:
addip_enable - BOOLEAN
Enable or disable extension of Dynamic Address Reconfiguration
(ADD-IP) functionality specified in RFC5061. This extension provides
the ability to dynamically add and remove new addresses for the SCTP
associations.
1: Enable extension.
0: Disable extension.
Default: 0
addip_noauth_enable - BOOLEAN
Dynamic Address Reconfiguration (ADD-IP) requires the use of
authentication to protect the operations of adding or removing new
addresses. This requirement is mandated so that unauthorized hosts
would not be able to hijack associations. However, older
implementations may not have implemented this requirement while
allowing the ADD-IP extension. For reasons of interoperability,
we provide this variable to control the enforcement of the
authentication requirement.
1: Allow ADD-IP extension to be used without authentication. This
should only be set in a closed environment for interoperability
with older implementations.
0: Enforce the authentication requirement
Default: 0
auth_enable - BOOLEAN
Enable or disable Authenticated Chunks extension. This extension
provides the ability to send and receive authenticated chunks and is
required for secure operation of Dynamic Address Reconfiguration
(ADD-IP) extension.
1: Enable this extension.
0: Disable this extension.
Default: 0
prsctp_enable - BOOLEAN
Enable or disable the Partial Reliability extension (RFC3758) which
is used to notify peers that a given DATA should no longer be expected.
1: Enable extension
0: Disable
Default: 1
max_burst - INTEGER
The limit of the number of new packets that can be initially sent. It
controls how bursty the generated traffic can be.
Default: 4
association_max_retrans - INTEGER
Set the maximum number for retransmissions that an association can
attempt deciding that the remote end is unreachable. If this value
is exceeded, the association is terminated.
Default: 10
max_init_retransmits - INTEGER
The maximum number of retransmissions of INIT and COOKIE-ECHO chunks
that an association will attempt before declaring the destination
unreachable and terminating.
Default: 8
path_max_retrans - INTEGER
The maximum number of retransmissions that will be attempted on a given
path. Once this threshold is exceeded, the path is considered
unreachable, and new traffic will use a different path when the
association is multihomed.
Default: 5
rto_initial - INTEGER
The initial round trip timeout value in milliseconds that will be used
in calculating round trip times. This is the initial time interval
for retransmissions.
Default: 3000
dev_weight FIXME
discovery_slots FIXME
discovery_timeout FIXME
fast_poll_increase FIXME
ip6_queue_maxlen FIXME
lap_keepalive_time FIXME
lo_cong FIXME
max_baud_rate FIXME
max_dgram_qlen FIXME
max_noreply_time FIXME
max_tx_data_size FIXME
max_tx_window FIXME
min_tx_turn_time FIXME
mod_cong FIXME
no_cong FIXME
no_cong_thresh FIXME
slot_timeout FIXME
warn_noreply_time FIXME
rto_max - INTEGER
The maximum value (in milliseconds) of the round trip timeout. This
is the largest time interval that can elapse between retransmissions.
Default: 60000
rto_min - INTEGER
The minimum value (in milliseconds) of the round trip timeout. This
is the smallest time interval the can elapse between retransmissions.
Default: 1000
hb_interval - INTEGER
The interval (in milliseconds) between HEARTBEAT chunks. These chunks
are sent at the specified interval on idle paths to probe the state of
a given path between 2 associations.
Default: 30000
sack_timeout - INTEGER
The amount of time (in milliseconds) that the implementation will wait
to send a SACK.
Default: 200
valid_cookie_life - INTEGER
The default lifetime of the SCTP cookie (in milliseconds). The cookie
is used during association establishment.
Default: 60000
cookie_preserve_enable - BOOLEAN
Enable or disable the ability to extend the lifetime of the SCTP cookie
that is used during the establishment phase of SCTP association
1: Enable cookie lifetime extension.
0: Disable
Default: 1
rcvbuf_policy - INTEGER
Determines if the receive buffer is attributed to the socket or to
association. SCTP supports the capability to create multiple
associations on a single socket. When using this capability, it is
possible that a single stalled association that's buffering a lot
of data may block other associations from delivering their data by
consuming all of the receive buffer space. To work around this,
the rcvbuf_policy could be set to attribute the receiver buffer space
to each association instead of the socket. This prevents the described
blocking.
1: rcvbuf space is per association
0: recbuf space is per socket
Default: 0
sndbuf_policy - INTEGER
Similar to rcvbuf_policy above, this applies to send buffer space.
1: Send buffer is tracked per association
0: Send buffer is tracked per socket.
Default: 0
sctp_mem - vector of 3 INTEGERs: min, pressure, max
Number of pages allowed for queueing by all SCTP sockets.
min: Below this number of pages SCTP is not bothered about its
memory appetite. When amount of memory allocated by SCTP exceeds
this number, SCTP starts to moderate memory usage.
pressure: This value was introduced to follow format of tcp_mem.
max: Number of pages allowed for queueing by all SCTP sockets.
Default is calculated at boot time from amount of available memory.
sctp_rmem - vector of 3 INTEGERs: min, default, max
See tcp_rmem for a description.
sctp_wmem - vector of 3 INTEGERs: min, default, max
See tcp_wmem for a description.
UNDOCUMENTED:
/proc/sys/net/core/*
dev_weight FIXME
/proc/sys/net/unix/*
max_dgram_qlen FIXME
/proc/sys/net/irda/*
fast_poll_increase FIXME
warn_noreply_time FIXME
discovery_slots FIXME
slot_timeout FIXME
max_baud_rate FIXME
discovery_timeout FIXME
lap_keepalive_time FIXME
max_noreply_time FIXME
max_tx_data_size FIXME
max_tx_window FIXME
min_tx_turn_time FIXME
......@@ -522,7 +522,6 @@ static int eth_poll(struct napi_struct *napi, int budget)
#endif
if ((n = queue_get_desc(rxq, port, 0)) < 0) {
received = 0; /* No packet received */
#if DEBUG_RX
printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
dev->name);
......@@ -543,7 +542,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
printk(KERN_DEBUG "%s: eth_poll all done\n",
dev->name);
#endif
return 0; /* all work done */
return received; /* all work done */
}
desc = rx_desc_ptr(port, n);
......
......@@ -690,6 +690,12 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
tun->attached = 1;
get_net(dev_net(tun->dev));
/* Make sure persistent devices do not get stuck in
* xoff state.
*/
if (netif_running(tun->dev))
netif_wake_queue(tun->dev);
strcpy(ifr->ifr_name, tun->dev->name);
return 0;
......
......@@ -567,11 +567,11 @@ static int lbs_process_bss(struct bss_descriptor *bss,
pos += 8;
/* beacon interval is 2 bytes long */
bss->beaconperiod = le16_to_cpup((void *) pos);
bss->beaconperiod = get_unaligned_le16(pos);
pos += 2;
/* capability information is 2 bytes long */
bss->capability = le16_to_cpup((void *) pos);
bss->capability = get_unaligned_le16(pos);
lbs_deb_scan("process_bss: capabilities 0x%04x\n", bss->capability);
pos += 2;
......
......@@ -733,6 +733,17 @@ static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev)
(rt2x00dev->rx->data_size / 128));
rt2x00pci_register_write(rt2x00dev, CSR9, reg);
rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
rt2x00_set_field32(&reg, CSR14_TBCN, 0);
rt2x00_set_field32(&reg, CSR14_TCFP, 0);
rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000);
rt2x00pci_register_read(rt2x00dev, ARCSR0, &reg);
......
......@@ -831,6 +831,17 @@ static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
rt2x00pci_register_write(rt2x00dev, CSR11, reg);
rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
rt2x00_set_field32(&reg, CSR14_TBCN, 0);
rt2x00_set_field32(&reg, CSR14_TCFP, 0);
rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
rt2x00pci_register_write(rt2x00dev, CNT3, 0);
rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);
......
......@@ -812,6 +812,13 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 0);
rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
......
......@@ -1198,6 +1198,15 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);
......
......@@ -1016,6 +1016,15 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg);
rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
rt73usb_register_read(rt2x00dev, MAC_CSR6, &reg);
......
......@@ -707,6 +707,7 @@ static void zd_op_remove_interface(struct ieee80211_hw *hw,
{
struct zd_mac *mac = zd_hw_mac(hw);
mac->type = IEEE80211_IF_TYPE_INVALID;
zd_set_beacon_interval(&mac->chip, 0);
zd_write_mac_addr(&mac->chip, NULL);
}
......
......@@ -339,6 +339,7 @@ struct xfrm_usersa_info {
#define XFRM_STATE_NOPMTUDISC 4
#define XFRM_STATE_WILDRECV 8
#define XFRM_STATE_ICMP 16
#define XFRM_STATE_AF_UNSPEC 32
};
struct xfrm_usersa_id {
......
......@@ -1357,17 +1357,17 @@ static int check_leaf(struct trie *t, struct leaf *l,
t->stats.semantic_match_miss++;
#endif
if (err <= 0)
return plen;
return err;
}
return -1;
return 1;
}
static int fn_trie_lookup(struct fib_table *tb, const struct flowi *flp,
struct fib_result *res)
{
struct trie *t = (struct trie *) tb->tb_data;
int plen, ret = 0;
int ret;
struct node *n;
struct tnode *pn;
int pos, bits;
......@@ -1391,10 +1391,7 @@ static int fn_trie_lookup(struct fib_table *tb, const struct flowi *flp,
/* Just a leaf? */
if (IS_LEAF(n)) {
plen = check_leaf(t, (struct leaf *)n, key, flp, res);
if (plen < 0)
goto failed;
ret = 0;
ret = check_leaf(t, (struct leaf *)n, key, flp, res);
goto found;
}
......@@ -1419,11 +1416,9 @@ static int fn_trie_lookup(struct fib_table *tb, const struct flowi *flp,
}
if (IS_LEAF(n)) {
plen = check_leaf(t, (struct leaf *)n, key, flp, res);
if (plen < 0)
ret = check_leaf(t, (struct leaf *)n, key, flp, res);
if (ret > 0)
goto backtrace;
ret = 0;
goto found;
}
......
......@@ -439,8 +439,8 @@ static unsigned char asn1_oid_decode(struct asn1_ctx *ctx,
unsigned int *len)
{
unsigned long subid;
unsigned int size;
unsigned long *optr;
size_t size;
size = eoc - ctx->pointer + 1;
......
......@@ -224,7 +224,7 @@ static __init int tcpprobe_init(void)
if (bufsize < 0)
return -EINVAL;
tcp_probe.log = kcalloc(sizeof(struct tcp_log), bufsize, GFP_KERNEL);
tcp_probe.log = kcalloc(bufsize, sizeof(struct tcp_log), GFP_KERNEL);
if (!tcp_probe.log)
goto err0;
......
......@@ -443,7 +443,7 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
kfree_skb(skb);
return -1;
}
if (!ipv6_chk_home_addr(&init_net, addr)) {
if (!ipv6_chk_home_addr(dev_net(skb->dst->dev), addr)) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
IPSTATS_MIB_INADDRERRORS);
kfree_skb(skb);
......
......@@ -141,7 +141,6 @@ struct rc_pid_events_file_info {
* rate behaviour values (lower means we should trust more what we learnt
* about behaviour of rates, higher means we should trust more the natural
* ordering of rates)
* @fast_start: if Y, push high rates right after initialization
*/
struct rc_pid_debugfs_entries {
struct dentry *dir;
......@@ -154,7 +153,6 @@ struct rc_pid_debugfs_entries {
struct dentry *sharpen_factor;
struct dentry *sharpen_duration;
struct dentry *norm_offset;
struct dentry *fast_start;
};
void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf,
......@@ -267,9 +265,6 @@ struct rc_pid_info {
/* Normalization offset. */
unsigned int norm_offset;
/* Fast starst parameter. */
unsigned int fast_start;
/* Rates information. */
struct rc_pid_rateinfo *rinfo;
......
......@@ -398,13 +398,25 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local)
return NULL;
}
pinfo->target = RC_PID_TARGET_PF;
pinfo->sampling_period = RC_PID_INTERVAL;
pinfo->coeff_p = RC_PID_COEFF_P;
pinfo->coeff_i = RC_PID_COEFF_I;
pinfo->coeff_d = RC_PID_COEFF_D;
pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT;
pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
pinfo->norm_offset = RC_PID_NORM_OFFSET;
pinfo->rinfo = rinfo;
pinfo->oldrate = 0;
/* Sort the rates. This is optimized for the most common case (i.e.
* almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
* mapping too. */
for (i = 0; i < sband->n_bitrates; i++) {
rinfo[i].index = i;
rinfo[i].rev_index = i;
if (pinfo->fast_start)
if (RC_PID_FAST_START)
rinfo[i].diff = 0;
else
rinfo[i].diff = i * pinfo->norm_offset;
......@@ -425,19 +437,6 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local)
break;
}
pinfo->target = RC_PID_TARGET_PF;
pinfo->sampling_period = RC_PID_INTERVAL;
pinfo->coeff_p = RC_PID_COEFF_P;
pinfo->coeff_i = RC_PID_COEFF_I;
pinfo->coeff_d = RC_PID_COEFF_D;
pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT;
pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
pinfo->norm_offset = RC_PID_NORM_OFFSET;
pinfo->fast_start = RC_PID_FAST_START;
pinfo->rinfo = rinfo;
pinfo->oldrate = 0;
#ifdef CONFIG_MAC80211_DEBUGFS
de = &pinfo->dentries;
de->dir = debugfs_create_dir("rc80211_pid",
......@@ -465,9 +464,6 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local)
de->norm_offset = debugfs_create_u32("norm_offset",
S_IRUSR | S_IWUSR, de->dir,
&pinfo->norm_offset);
de->fast_start = debugfs_create_bool("fast_start",
S_IRUSR | S_IWUSR, de->dir,
&pinfo->fast_start);
#endif
return pinfo;
......@@ -479,7 +475,6 @@ static void rate_control_pid_free(void *priv)
#ifdef CONFIG_MAC80211_DEBUGFS
struct rc_pid_debugfs_entries *de = &pinfo->dentries;
debugfs_remove(de->fast_start);
debugfs_remove(de->norm_offset);
debugfs_remove(de->sharpen_duration);
debugfs_remove(de->sharpen_factor);
......
......@@ -844,8 +844,14 @@ static int tcp_packet(struct nf_conn *ct,
/* Attempt to reopen a closed/aborted connection.
* Delete this connection and look up again. */
write_unlock_bh(&tcp_lock);
nf_ct_kill(ct);
/* Only repeat if we can actually remove the timer.
* Destruction may already be in progress in process
* context and we must give it a chance to terminate.
*/
if (nf_ct_kill(ct))
return -NF_REPEAT;
return -NF_DROP;
}
/* Fall through */
case TCP_CONNTRACK_IGNORE:
......
......@@ -584,12 +584,7 @@ static int netlbl_cipsov4_list(struct sk_buff *skb, struct genl_info *info)
rcu_read_unlock();
genlmsg_end(ans_skb, data);
ret_val = genlmsg_reply(ans_skb, info);
if (ret_val != 0)
goto list_failure;
return 0;
return genlmsg_reply(ans_skb, info);
list_retry:
/* XXX - this limit is a guesstimate */
......
......@@ -386,11 +386,7 @@ static int netlbl_mgmt_listdef(struct sk_buff *skb, struct genl_info *info)
rcu_read_unlock();
genlmsg_end(ans_skb, data);
ret_val = genlmsg_reply(ans_skb, info);
if (ret_val != 0)
goto listdef_failure;
return 0;
return genlmsg_reply(ans_skb, info);
listdef_failure_lock:
rcu_read_unlock();
......@@ -501,11 +497,7 @@ static int netlbl_mgmt_version(struct sk_buff *skb, struct genl_info *info)
goto version_failure;
genlmsg_end(ans_skb, data);
ret_val = genlmsg_reply(ans_skb, info);
if (ret_val != 0)
goto version_failure;
return 0;
return genlmsg_reply(ans_skb, info);
version_failure:
kfree_skb(ans_skb);
......
......@@ -1107,11 +1107,7 @@ static int netlbl_unlabel_list(struct sk_buff *skb, struct genl_info *info)
goto list_failure;
genlmsg_end(ans_skb, data);
ret_val = genlmsg_reply(ans_skb, info);
if (ret_val != 0)
goto list_failure;
return 0;
return genlmsg_reply(ans_skb, info);
list_failure:
kfree_skb(ans_skb);
......
......@@ -277,9 +277,8 @@ static void copy_from_user_state(struct xfrm_state *x, struct xfrm_usersa_info *
memcpy(&x->props.saddr, &p->saddr, sizeof(x->props.saddr));
x->props.flags = p->flags;
if (!x->sel.family)
if (!x->sel.family && !(p->flags & XFRM_STATE_AF_UNSPEC))
x->sel.family = p->family;
}
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册