Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 2a7e2990 编写于 作者: D David S. Miller
浏览文件
操作

[SPARC64]: Move kernel TLB miss handling into a seperate file. 

Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 efb0372b
显示空白变更内容
内联 并排
Showing with 179 addition and 157 deletion
arch/sparc64/kernel/dtlb_base.S
浏览文件 @ 2a7e2990
......@@ -71,7 +71,7 @@
from_tl1_trap:
rdpr %tl, %g5 ! For TL==3 test
CREATE_VPTE_OFFSET1(%g4, %g6) ! Create VPTE offset
be,pn %xcc, 3f ! Yep, special processing
be,pn %xcc, kvmap ! Yep, special processing
CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset
cmp %g5, 4 ! Last trap level?
be,pn %xcc, longpath ! Yep, cannot risk VPTE miss
......@@ -83,9 +83,9 @@ from_tl1_trap:
nop ! Delay-slot
9: stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB
retry ! Trap return
3: brlz,pt %g4, 9b ! Kernel virtual map?
xor %g2, %g4, %g5 ! Finish bit twiddles
ba,a,pt %xcc, kvmap ! Yep, go check for obp/vmalloc
nop
nop
nop
/* DTLB ** ICACHE line 3: winfixups+real_faults */
longpath:
......
arch/sparc64/kernel/entry.S
浏览文件 @ 2a7e2990
......@@ -30,159 +30,6 @@
.text
.align 32
.globl sparc64_vpte_patchme1
.globl sparc64_vpte_patchme2
/*
* On a second level vpte miss, check whether the original fault is to the OBP
* range (note that this is only possible for instruction miss, data misses to
* obp range do not use vpte). If so, go back directly to the faulting address.
* This is because we want to read the tpc, otherwise we have no way of knowing
* the 8k aligned faulting address if we are using >8k kernel pagesize. This
* also ensures no vpte range addresses are dropped into tlb while obp is
* executing (see inherit_locked_prom_mappings() rant).
*/
sparc64_vpte_nucleus:
/* Note that kvmap below has verified that the address is
* in the range MODULES_VADDR --> VMALLOC_END already. So
* here we need only check if it is an OBP address or not.
*/
sethi %hi(LOW_OBP_ADDRESS), %g5
cmp %g4, %g5
blu,pn %xcc, sparc64_vpte_patchme1
mov 0x1, %g5
sllx %g5, 32, %g5
cmp %g4, %g5
blu,pn %xcc, obp_iaddr_patch
nop
/* These two instructions are patched by paginig_init(). */
sparc64_vpte_patchme1:
sethi %hi(0), %g5
sparc64_vpte_patchme2:
or %g5, %lo(0), %g5
/* With kernel PGD in %g5, branch back into dtlb_backend. */
ba,pt %xcc, sparc64_kpte_continue
andn %g1, 0x3, %g1 /* Finish PMD offset adjustment. */
vpte_noent:
/* Restore previous TAG_ACCESS, %g5 is zero, and we will
* skip over the trap instruction so that the top level
* TLB miss handler will thing this %g5 value is just an
* invalid PTE, thus branching to full fault processing.
*/
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_DMMU
done
.globl obp_iaddr_patch
obp_iaddr_patch:
/* These two instructions patched by inherit_prom_mappings(). */
sethi %hi(0), %g5
or %g5, %lo(0), %g5
/* Behave as if we are at TL0. */
wrpr %g0, 1, %tl
rdpr %tpc, %g4 /* Find original faulting iaddr */
srlx %g4, 13, %g4 /* Throw out context bits */
sllx %g4, 13, %g4 /* g4 has vpn + ctx0 now */
/* Restore previous TAG_ACCESS. */
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_IMMU
/* Get PMD offset. */
srlx %g4, 23, %g6
and %g6, 0x7ff, %g6
sllx %g6, 2, %g6
/* Load PMD, is it valid? */
lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brz,pn %g5, longpath
sllx %g5, 11, %g5
/* Get PTE offset. */
srlx %g4, 13, %g6
and %g6, 0x3ff, %g6
sllx %g6, 3, %g6
/* Load PTE. */
ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brgez,pn %g5, longpath
nop
/* TLB load and return from trap. */
stxa %g5, [%g0] ASI_ITLB_DATA_IN
retry
.globl obp_daddr_patch
obp_daddr_patch:
/* These two instructions patched by inherit_prom_mappings(). */
sethi %hi(0), %g5
or %g5, %lo(0), %g5
/* Get PMD offset. */
srlx %g4, 23, %g6
and %g6, 0x7ff, %g6
sllx %g6, 2, %g6
/* Load PMD, is it valid? */
lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brz,pn %g5, longpath
sllx %g5, 11, %g5
/* Get PTE offset. */
srlx %g4, 13, %g6
and %g6, 0x3ff, %g6
sllx %g6, 3, %g6
/* Load PTE. */
ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brgez,pn %g5, longpath
nop
/* TLB load and return from trap. */
stxa %g5, [%g0] ASI_DTLB_DATA_IN
retry
/*
* On a first level data miss, check whether this is to the OBP range (note
* that such accesses can be made by prom, as well as by kernel using
* prom_getproperty on "address"), and if so, do not use vpte access ...
* rather, use information saved during inherit_prom_mappings() using 8k
* pagesize.
*/
.align 32
kvmap:
sethi %hi(MODULES_VADDR), %g5
cmp %g4, %g5
blu,pn %xcc, longpath
mov (VMALLOC_END >> 24), %g5
sllx %g5, 24, %g5
cmp %g4, %g5
bgeu,pn %xcc, longpath
nop
kvmap_check_obp:
sethi %hi(LOW_OBP_ADDRESS), %g5
cmp %g4, %g5
blu,pn %xcc, kvmap_vmalloc_addr
mov 0x1, %g5
sllx %g5, 32, %g5
cmp %g4, %g5
blu,pn %xcc, obp_daddr_patch
nop
kvmap_vmalloc_addr:
/* If we get here, a vmalloc addr was accessed, load kernel VPTE. */
ldxa [%g3 + %g6] ASI_N, %g5
brgez,pn %g5, longpath
nop
/* PTE is valid, load into TLB and return from trap. */
stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB
retry
/* This is trivial with the new code... */
.globl do_fpdis
do_fpdis:
......
arch/sparc64/kernel/head.S
浏览文件 @ 2a7e2990
......@@ -762,6 +762,7 @@ bootup_user_stack_end:
swapper_pg_dir:
.word 0
#include "ktlb.S"
#include "etrap.S"
#include "rtrap.S"
#include "winfixup.S"
......
arch/sparc64/kernel/ktlb.S 0 → 100644
浏览文件 @ 2a7e2990
/* arch/sparc64/kernel/ktlb.S: Kernel mapping TLB miss handling.
*
* Copyright (C) 1995, 1997, 2005 David S. Miller <davem@davemloft.net>
* Copyright (C) 1996 Eddie C. Dost (ecd@brainaid.de)
* Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1996,98,99 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#include <linux/config.h>
#include <asm/head.h>
#include <asm/asi.h>
#include <asm/page.h>
#include <asm/pgtable.h>
.text
.align 32
.globl sparc64_vpte_patchme1
.globl sparc64_vpte_patchme2
/*
* On a second level vpte miss, check whether the original fault is to the OBP
* range (note that this is only possible for instruction miss, data misses to
* obp range do not use vpte). If so, go back directly to the faulting address.
* This is because we want to read the tpc, otherwise we have no way of knowing
* the 8k aligned faulting address if we are using >8k kernel pagesize. This
* also ensures no vpte range addresses are dropped into tlb while obp is
* executing (see inherit_locked_prom_mappings() rant).
*/
sparc64_vpte_nucleus:
/* Note that kvmap below has verified that the address is
* in the range MODULES_VADDR --> VMALLOC_END already. So
* here we need only check if it is an OBP address or not.
*/
sethi %hi(LOW_OBP_ADDRESS), %g5
cmp %g4, %g5
blu,pn %xcc, sparc64_vpte_patchme1
mov 0x1, %g5
sllx %g5, 32, %g5
cmp %g4, %g5
blu,pn %xcc, obp_iaddr_patch
nop
/* These two instructions are patched by paginig_init(). */
sparc64_vpte_patchme1:
sethi %hi(0), %g5
sparc64_vpte_patchme2:
or %g5, %lo(0), %g5
/* With kernel PGD in %g5, branch back into dtlb_backend. */
ba,pt %xcc, sparc64_kpte_continue
andn %g1, 0x3, %g1 /* Finish PMD offset adjustment. */
vpte_noent:
/* Restore previous TAG_ACCESS, %g5 is zero, and we will
* skip over the trap instruction so that the top level
* TLB miss handler will thing this %g5 value is just an
* invalid PTE, thus branching to full fault processing.
*/
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_DMMU
done
.globl obp_iaddr_patch
obp_iaddr_patch:
/* These two instructions patched by inherit_prom_mappings(). */
sethi %hi(0), %g5
or %g5, %lo(0), %g5
/* Behave as if we are at TL0. */
wrpr %g0, 1, %tl
rdpr %tpc, %g4 /* Find original faulting iaddr */
srlx %g4, 13, %g4 /* Throw out context bits */
sllx %g4, 13, %g4 /* g4 has vpn + ctx0 now */
/* Restore previous TAG_ACCESS. */
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_IMMU
/* Get PMD offset. */
srlx %g4, 23, %g6
and %g6, 0x7ff, %g6
sllx %g6, 2, %g6
/* Load PMD, is it valid? */
lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brz,pn %g5, longpath
sllx %g5, 11, %g5
/* Get PTE offset. */
srlx %g4, 13, %g6
and %g6, 0x3ff, %g6
sllx %g6, 3, %g6
/* Load PTE. */
ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brgez,pn %g5, longpath
nop
/* TLB load and return from trap. */
stxa %g5, [%g0] ASI_ITLB_DATA_IN
retry
.globl obp_daddr_patch
obp_daddr_patch:
/* These two instructions patched by inherit_prom_mappings(). */
sethi %hi(0), %g5
or %g5, %lo(0), %g5
/* Get PMD offset. */
srlx %g4, 23, %g6
and %g6, 0x7ff, %g6
sllx %g6, 2, %g6
/* Load PMD, is it valid? */
lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brz,pn %g5, longpath
sllx %g5, 11, %g5
/* Get PTE offset. */
srlx %g4, 13, %g6
and %g6, 0x3ff, %g6
sllx %g6, 3, %g6
/* Load PTE. */
ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
brgez,pn %g5, longpath
nop
/* TLB load and return from trap. */
stxa %g5, [%g0] ASI_DTLB_DATA_IN
retry
/*
* On a first level data miss, check whether this is to the OBP range (note
* that such accesses can be made by prom, as well as by kernel using
* prom_getproperty on "address"), and if so, do not use vpte access ...
* rather, use information saved during inherit_prom_mappings() using 8k
* pagesize.
*/
.align 32
kvmap:
brlz,pt %g4, kvmap_load
xor %g2, %g4, %g5
kvmap_nonlinear:
sethi %hi(MODULES_VADDR), %g5
cmp %g4, %g5
blu,pn %xcc, longpath
mov (VMALLOC_END >> 24), %g5
sllx %g5, 24, %g5
cmp %g4, %g5
bgeu,pn %xcc, longpath
nop
kvmap_check_obp:
sethi %hi(LOW_OBP_ADDRESS), %g5
cmp %g4, %g5
blu,pn %xcc, kvmap_vmalloc_addr
mov 0x1, %g5
sllx %g5, 32, %g5
cmp %g4, %g5
blu,pn %xcc, obp_daddr_patch
nop
kvmap_vmalloc_addr:
/* If we get here, a vmalloc addr was accessed, load kernel VPTE. */
ldxa [%g3 + %g6] ASI_N, %g5
brgez,pn %g5, longpath
nop
kvmap_load:
/* PTE is valid, load into TLB and return from trap. */
stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB
retry
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或