提交 27c915a4 编写于 作者: D Dhananjay Phadke 提交者: David S. Miller

netxen: firmware init fix

o Fix order or rom register writes.
o Reduce udelays when writing rom registers.

This cuts the firmware init time by 40%.

o Do not reset core/memory clocks when reinitializing driver.
  Firmware willl handle this when initialized.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 c7860a2a
......@@ -939,7 +939,7 @@ int netxen_load_firmware(struct netxen_adapter *adapter)
{
int i;
u32 data, size = 0;
u32 flashaddr = NETXEN_BOOTLD_START, memaddr = NETXEN_BOOTLD_START;
u32 flashaddr = NETXEN_BOOTLD_START;
size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START)/4;
......@@ -951,10 +951,8 @@ int netxen_load_firmware(struct netxen_adapter *adapter)
if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0)
return -EIO;
adapter->pci_mem_write(adapter, memaddr, &data, 4);
adapter->pci_mem_write(adapter, flashaddr, &data, 4);
flashaddr += 4;
memaddr += 4;
cond_resched();
}
msleep(1);
......
......@@ -439,6 +439,8 @@ static int netxen_wait_rom_done(struct netxen_adapter *adapter)
long timeout = 0;
long done = 0;
cond_resched();
while (done == 0) {
done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS);
done &= 2;
......@@ -533,12 +535,9 @@ static int do_rom_fast_write(struct netxen_adapter *adapter, int addr,
static int do_rom_fast_read(struct netxen_adapter *adapter,
int addr, int *valp)
{
cond_resched();
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
udelay(100); /* prevent bursting on CRB */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
if (netxen_wait_rom_done(adapter)) {
printk("Error waiting for rom done\n");
......@@ -546,7 +545,7 @@ static int do_rom_fast_read(struct netxen_adapter *adapter,
}
/* reset abyte_cnt and dummy_byte_cnt */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
udelay(100); /* prevent bursting on CRB */
udelay(10);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
*valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
......@@ -884,14 +883,16 @@ int netxen_flash_unlock(struct netxen_adapter *adapter)
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
{
int addr, val;
int i, init_delay = 0;
int i, n, init_delay = 0;
struct crb_addr_pair *buf;
unsigned offset, n;
unsigned offset;
u32 off;
/* resetall */
rom_lock(adapter);
netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
0xffffffff);
netxen_rom_unlock(adapter);
if (verbose) {
if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
......@@ -910,7 +911,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
(n != 0xcafecafeUL) ||
(n != 0xcafecafe) ||
netxen_rom_fast_read(adapter, 4, &n) != 0) {
printk(KERN_ERR "%s: ERROR Reading crb_init area: "
"n: %08x\n", netxen_nic_driver_name, n);
......@@ -975,6 +976,14 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
/* do not reset PCI */
if (off == (ROMUSB_GLB + 0xbc))
continue;
if (off == (ROMUSB_GLB + 0xa8))
continue;
if (off == (ROMUSB_GLB + 0xc8)) /* core clock */
continue;
if (off == (ROMUSB_GLB + 0x24)) /* MN clock */
continue;
if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
continue;
if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
buf[i].data = 0x1020;
/* skip the function enable register */
......@@ -992,23 +1001,21 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
continue;
}
init_delay = 1;
/* After writing this register, HW needs time for CRB */
/* to quiet down (else crb_window returns 0xffffffff) */
if (off == NETXEN_ROMUSB_GLB_SW_RESET) {
init_delay = 1;
init_delay = 1000;
if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
/* hold xdma in reset also */
buf[i].data = NETXEN_NIC_XDMA_RESET;
buf[i].data = 0x8000ff;
}
}
adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
if (init_delay == 1) {
msleep(1000);
init_delay = 0;
}
msleep(1);
msleep(init_delay);
}
kfree(buf);
......
......@@ -280,10 +280,15 @@ static void netxen_check_options(struct netxen_adapter *adapter)
static int
netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
{
int ret = 0;
u32 val, timeout;
if (first_boot == 0x55555555) {
/* This is the first boot after power up */
adapter->pci_write_normalize(adapter,
NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
return 0;
/* PCI bus master workaround */
adapter->hw_read_wx(adapter,
......@@ -303,18 +308,26 @@ netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
/* clear the register for future unloads/loads */
adapter->pci_write_normalize(adapter,
NETXEN_CAM_RAM(0x1fc), 0);
ret = -1;
return -EIO;
}
if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
/* Start P2 boot loader */
val = adapter->pci_read_normalize(adapter,
NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
adapter->pci_write_normalize(adapter,
NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
adapter->pci_write_normalize(adapter,
NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
}
NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
timeout = 0;
do {
msleep(1);
val = adapter->pci_read_normalize(adapter,
NETXEN_CAM_RAM(0x1fc));
if (++timeout > 5000)
return -EIO;
} while (val == NETXEN_BDINFO_MAGIC);
}
return ret;
return 0;
}
static void netxen_set_port_mode(struct netxen_adapter *adapter)
......@@ -793,8 +806,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
CRB_CMDPEG_STATE, 0);
netxen_pinit_from_rom(adapter, 0);
msleep(1);
netxen_load_firmware(adapter);
}
netxen_load_firmware(adapter);
if (NX_IS_REVISION_P3(revision_id))
netxen_pcie_strap_init(adapter);
......@@ -810,13 +823,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
if ((first_boot == 0x55555555) &&
(NX_IS_REVISION_P2(revision_id))) {
/* Unlock the HW, prompting the boot sequence */
adapter->pci_write_normalize(adapter,
NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
}
err = netxen_initialize_adapter_offload(adapter);
if (err)
goto err_out_iounmap;
......@@ -830,7 +836,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
/* Handshake with the card before we register the devices. */
netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
if (err)
goto err_out_free_offload;
} /* first_driver */
......@@ -934,6 +942,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
pci_disable_msi(pdev);
err_out_free_offload:
if (first_driver)
netxen_free_adapter_offload(adapter);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册