[PATCH] add support for Marvell 8385 CF cards

This patch adds support for Marvell based 8385 compact flash cards.
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/wireless/Kconfig

@@ -275,6 +275,13 @@ config LIBERTAS_USB
 	---help---
 	  A driver for Marvell Libertas 8388 USB devices.
 
+config LIBERTAS_CS
+	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
+	depends on LIBERTAS && PCMCIA && EXPERIMENTAL
+	select FW_LOADER
+	---help---
+	  A driver for Marvell Libertas 8385 CompactFlash devices.
+
 config LIBERTAS_DEBUG
 	bool "Enable full debugging output in the Libertas module."
 	depends on LIBERTAS

drivers/net/wireless/libertas/Makefile

@@ -6,6 +6,8 @@ libertas-objs := main.o wext.o \
 		ethtool.o assoc.o
 
 usb8xxx-objs += if_usb.o
+libertas_cs-objs += if_cs.o
 
 obj-$(CONFIG_LIBERTAS)     += libertas.o
 obj-$(CONFIG_LIBERTAS_USB) += usb8xxx.o
+obj-$(CONFIG_LIBERTAS_CS)  += libertas_cs.o

drivers/net/wireless/libertas/if_cs.c

+/*
+
+  Driver for the Marvell 8385 based compact flash WLAN cards.
+
+  (C) 2007 by Holger Schurig <hs4233@mail.mn-solutions.de>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; see the file COPYING.  If not, write to
+  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+  Boston, MA 02110-1301, USA.
+
+*/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/netdevice.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#include <linux/io.h>
+
+#define DRV_NAME "libertas_cs"
+
+#include "decl.h"
+#include "defs.h"
+#include "dev.h"
+
+
+/********************************************************************/
+/* Module stuff                                                     */
+/********************************************************************/
+
+MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
+MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
+MODULE_LICENSE("GPL");
+
+
+
+/********************************************************************/
+/* Data structures                                                  */
+/********************************************************************/
+
+struct if_cs_card {
+	struct pcmcia_device *p_dev;
+	wlan_private *priv;
+	void __iomem *iobase;
+};
+
+
+
+/********************************************************************/
+/* Hardware access                                                  */
+/********************************************************************/
+
+/* This define enables wrapper functions which allow you
+   to dump all register accesses. You normally won't this,
+   except for development */
+/* #define DEBUG_IO */
+
+#ifdef DEBUG_IO
+static int debug_output = 0;
+#else
+/* This way the compiler optimizes the printk's away */
+#define debug_output 0
+#endif
+
+static inline unsigned int if_cs_read8(struct if_cs_card *card, uint reg)
+{
+	unsigned int val = ioread8(card->iobase + reg);
+	if (debug_output)
+		printk(KERN_INFO "##inb %08x<%02x\n", reg, val);
+	return val;
+}
+static inline unsigned int if_cs_read16(struct if_cs_card *card, uint reg)
+{
+	unsigned int val = ioread16(card->iobase + reg);
+	if (debug_output)
+		printk(KERN_INFO "##inw %08x<%04x\n", reg, val);
+	return val;
+}
+static inline void if_cs_read16_rep(
+	struct if_cs_card *card,
+	uint reg,
+	void *buf,
+	unsigned long count)
+{
+	if (debug_output)
+		printk(KERN_INFO "##insw %08x<(0x%lx words)\n",
+			reg, count);
+	ioread16_rep(card->iobase + reg, buf, count);
+}
+
+static inline void if_cs_write8(struct if_cs_card *card, uint reg, u8 val)
+{
+	if (debug_output)
+		printk(KERN_INFO "##outb %08x>%02x\n", reg, val);
+	iowrite8(val, card->iobase + reg);
+}
+
+static inline void if_cs_write16(struct if_cs_card *card, uint reg, u16 val)
+{
+	if (debug_output)
+		printk(KERN_INFO "##outw %08x>%04x\n", reg, val);
+	iowrite16(val, card->iobase + reg);
+}
+
+static inline void if_cs_write16_rep(
+	struct if_cs_card *card,
+	uint reg,
+	void *buf,
+	unsigned long count)
+{
+	if (debug_output)
+		printk(KERN_INFO "##outsw %08x>(0x%lx words)\n",
+			reg, count);
+	iowrite16_rep(card->iobase + reg, buf, count);
+}
+
+
+/*
+ * I know that polling/delaying is frowned upon. However, this procedure
+ * with polling is needed while downloading the firmware. At this stage,
+ * the hardware does unfortunately not create any interrupts.
+ *
+ * Fortunately, this function is never used once the firmware is in
+ * the card. :-)
+ *
+ * As a reference, see the "Firmware Specification v5.1", page 18
+ * and 19. I did not follow their suggested timing to the word,
+ * but this works nice & fast anyway.
+ */
+static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 reg)
+{
+	int i;
+
+	for (i = 0; i < 500; i++) {
+		u8 val = if_cs_read8(card, addr);
+		if (val == reg)
+			return i;
+		udelay(100);
+	}
+	return -ETIME;
+}
+
+
+
+/* Host control registers and their bit definitions */
+
+#define IF_CS_H_STATUS			0x00000000
+#define IF_CS_H_STATUS_TX_OVER		0x0001
+#define IF_CS_H_STATUS_RX_OVER		0x0002
+#define IF_CS_H_STATUS_DNLD_OVER	0x0004
+
+#define IF_CS_H_INT_CAUSE		0x00000002
+#define IF_CS_H_IC_TX_OVER		0x0001
+#define IF_CS_H_IC_RX_OVER		0x0002
+#define IF_CS_H_IC_DNLD_OVER		0x0004
+#define IF_CS_H_IC_HOST_EVENT		0x0008
+#define IF_CS_H_IC_MASK			0x001f
+
+#define IF_CS_H_INT_MASK		0x00000004
+#define	IF_CS_H_IM_MASK			0x001f
+
+#define IF_CS_H_WRITE_LEN		0x00000014
+
+#define IF_CS_H_WRITE			0x00000016
+
+#define IF_CS_H_CMD_LEN			0x00000018
+
+#define IF_CS_H_CMD			0x0000001A
+
+#define IF_CS_C_READ_LEN		0x00000024
+
+#define IF_CS_H_READ			0x00000010
+
+/* Card control registers and their bit definitions */
+
+#define IF_CS_C_STATUS			0x00000020
+#define IF_CS_C_S_TX_DNLD_RDY		0x0001
+#define IF_CS_C_S_RX_UPLD_RDY		0x0002
+#define IF_CS_C_S_CMD_DNLD_RDY		0x0004
+#define IF_CS_C_S_CMD_UPLD_RDY		0x0008
+#define IF_CS_C_S_CARDEVENT		0x0010
+#define IF_CS_C_S_MASK			0x001f
+#define IF_CS_C_S_STATUS_MASK		0x7f00
+/* The following definitions should be the same as the MRVDRV_ ones */
+
+#if MRVDRV_CMD_DNLD_RDY != IF_CS_C_S_CMD_DNLD_RDY
+#error MRVDRV_CMD_DNLD_RDY and IF_CS_C_S_CMD_DNLD_RDY not in sync
+#endif
+#if MRVDRV_CMD_UPLD_RDY != IF_CS_C_S_CMD_UPLD_RDY
+#error MRVDRV_CMD_UPLD_RDY and IF_CS_C_S_CMD_UPLD_RDY not in sync
+#endif
+#if MRVDRV_CARDEVENT != IF_CS_C_S_CARDEVENT
+#error MRVDRV_CARDEVENT and IF_CS_C_S_CARDEVENT not in sync
+#endif
+
+#define IF_CS_C_INT_CAUSE		0x00000022
+#define	IF_CS_C_IC_MASK			0x001f
+
+#define IF_CS_C_SQ_READ_LOW		0x00000028
+#define IF_CS_C_SQ_HELPER_OK		0x10
+
+#define IF_CS_C_CMD_LEN			0x00000030
+
+#define IF_CS_C_CMD			0x00000012
+
+#define IF_CS_SCRATCH			0x0000003F
+
+
+
+/********************************************************************/
+/* Interrupts                                                       */
+/********************************************************************/
+
+static inline void if_cs_enable_ints(struct if_cs_card *card)
+{
+	lbs_deb_enter(LBS_DEB_CS);
+	if_cs_write16(card, IF_CS_H_INT_MASK, 0);
+}
+
+static inline void if_cs_disable_ints(struct if_cs_card *card)
+{
+	lbs_deb_enter(LBS_DEB_CS);
+	if_cs_write16(card, IF_CS_H_INT_MASK, IF_CS_H_IM_MASK);
+}
+
+static irqreturn_t if_cs_interrupt(int irq, void *data)
+{
+	struct if_cs_card *card = (struct if_cs_card *)data;
+	u16 int_cause;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE);
+	switch (int_cause) {
+	case 0x0000:
+		/* not for us */
+		return IRQ_NONE;
+	case 0xffff:
+		/* if one reads junk, then probably the card was removed */
+		card->priv->adapter->surpriseremoved = 1;
+		break;
+	case IF_CS_H_IC_TX_OVER:
+		if (card->priv->adapter->connect_status == LIBERTAS_CONNECTED)
+			netif_wake_queue(card->priv->dev);
+		/* fallthrought */
+	default:
+		/* clear interrupt */
+		if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause & IF_CS_C_IC_MASK);
+		if_cs_disable_ints(card);
+	}
+
+	libertas_interrupt(card->priv->dev);
+
+	return IRQ_HANDLED;
+}
+
+
+
+
+/********************************************************************/
+/* I/O                                                              */
+/********************************************************************/
+
+/*
+ * Called from if_cs_host_to_card to send a command to the hardware
+ */
+static int if_cs_send_cmd(wlan_private *priv, u8 *buf, u16 nb)
+{
+	struct if_cs_card *card = (struct if_cs_card *)priv->card;
+	int ret = -1;
+	int loops = 0;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	/* Is hardware ready? */
+	while (1) {
+		u16 val = if_cs_read16(card, IF_CS_C_STATUS);
+		if (val & IF_CS_C_S_CMD_DNLD_RDY)
+			break;
+		if (++loops > 100) {
+			lbs_pr_err("card not ready for commands\n");
+			goto done;
+		}
+		mdelay(1);
+	}
+
+	if_cs_write16(card, IF_CS_H_CMD_LEN, nb);
+
+	if_cs_write16_rep(card, IF_CS_H_CMD, buf, nb / 2);
+	/* Are we supposed to transfer an odd amount of bytes? */
+	if (nb & 1)
+		if_cs_write8(card, IF_CS_H_CMD, buf[nb-1]);
+
+	/* "Assert the download over interrupt command in the Host
+	 * status register" */
+	if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
+
+	/* "Assert the download over interrupt command in the Card
+	 * interrupt case register" */
+	if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
+	ret = 0;
+
+done:
+	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+	return ret;
+}
+
+
+/*
+ * Called from if_cs_host_to_card to send a data to the hardware
+ */
+static void if_cs_send_data(wlan_private *priv, u8 *buf, u16 nb)
+{
+	struct if_cs_card *card = (struct if_cs_card *)priv->card;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	if_cs_write16(card, IF_CS_H_WRITE_LEN, nb);
+
+	/* write even number of bytes, then odd byte if necessary */
+	if_cs_write16_rep(card, IF_CS_H_WRITE, buf, nb / 2);
+	if (nb & 1)
+		if_cs_write8(card, IF_CS_H_WRITE, buf[nb-1]);
+
+	if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_TX_OVER);
+	if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_STATUS_TX_OVER);
+
+	lbs_deb_leave(LBS_DEB_CS);
+}
+
+
+/*
+ * Get the command result out of the card.
+ */
+static int if_cs_receive_cmdres(wlan_private *priv, u8* data, u32 *len)
+{
+	int ret = -1;
+	u16 val;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	/* is hardware ready? */
+	val = if_cs_read16(priv->card, IF_CS_C_STATUS);
+	if ((val & IF_CS_C_S_CMD_UPLD_RDY) == 0) {
+		lbs_pr_err("card not ready for CMD\n");
+		goto out;
+	}
+
+	*len = if_cs_read16(priv->card, IF_CS_C_CMD_LEN);
+	if ((*len == 0) || (*len > MRVDRV_SIZE_OF_CMD_BUFFER)) {
+		lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
+		goto out;
+	}
+
+	/* read even number of bytes, then odd byte if necessary */
+	if_cs_read16_rep(priv->card, IF_CS_C_CMD, data, *len/sizeof(u16));
+	if (*len & 1)
+		data[*len-1] = if_cs_read8(priv->card, IF_CS_C_CMD);
+
+	ret = 0;
+out:
+	lbs_deb_leave_args(LBS_DEB_CS, "ret %d, len %d", ret, *len);
+	return ret;
+}
+
+
+static struct sk_buff *if_cs_receive_data(wlan_private *priv)
+{
+	struct sk_buff *skb = NULL;
+	u16 len;
+	u8 *data;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	len = if_cs_read16(priv->card, IF_CS_C_READ_LEN);
+	if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
+		lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
+		priv->stats.rx_dropped++;
+		printk(KERN_INFO "##HS %s:%d TODO\n", __FUNCTION__, __LINE__);
+		goto dat_err;
+	}
+
+	//TODO: skb = dev_alloc_skb(len+ETH_FRAME_LEN+MRVDRV_SNAP_HEADER_LEN+EXTRA_LEN);
+	skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
+	if (!skb)
+		goto out;
+	data = skb_put(skb, len);
+
+	/* read even number of bytes, then odd byte if necessary */
+	if_cs_read16_rep(priv->card, IF_CS_H_READ, data, len/sizeof(u16));
+	if (len & 1)
+		data[len-1] = if_cs_read8(priv->card, IF_CS_H_READ);
+
+dat_err:
+	if_cs_write16(priv->card, IF_CS_H_STATUS, IF_CS_H_STATUS_RX_OVER);
+	if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_RX_OVER);
+
+out:
+	lbs_deb_leave_args(LBS_DEB_CS, "ret %p", skb);
+	return skb;
+}
+
+
+
+/********************************************************************/
+/* Firmware                                                         */
+/********************************************************************/
+
+/*
+ * Tries to program the helper firmware.
+ *
+ * Return 0 on success
+ */
+static int if_cs_prog_helper(struct if_cs_card *card)
+{
+	int ret = 0;
+	int sent = 0;
+	u8  scratch;
+	const struct firmware *fw;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	scratch = if_cs_read8(card, IF_CS_SCRATCH);
+
+	/* "If the value is 0x5a, the firmware is already
+	 * downloaded successfully"
+	 */
+	if (scratch == 0x5a)
+		goto done;
+
+	/* "If the value is != 00, it is invalid value of register */
+	if (scratch != 0x00) {
+		ret = -ENODEV;
+		goto done;
+	}
+
+	/* TODO: make firmware file configurable */
+	ret = request_firmware(&fw, "libertas_cs_helper.fw",
+		&handle_to_dev(card->p_dev));
+	if (ret) {
+		lbs_pr_err("can't load helper firmware\n");
+		ret = -ENODEV;
+		goto done;
+	}
+	lbs_deb_cs("helper size %d\n", fw->size);
+
+	/* "Set the 5 bytes of the helper image to 0" */
+	/* Not needed, this contains an ARM branch instruction */
+
+	for (;;) {
+		/* "the number of bytes to send is 256" */
+		int count = 256;
+		int remain = fw->size - sent;
+
+		if (remain < count)
+			count = remain;
+		/* printk(KERN_INFO "//HS %d loading %d of %d bytes\n",
+			__LINE__, sent, fw->size); */
+
+		/* "write the number of bytes to be sent to the I/O Command
+		 * write length register" */
+		if_cs_write16(card, IF_CS_H_CMD_LEN, count);
+
+		/* "write this to I/O Command port register as 16 bit writes */
+		if (count)
+			if_cs_write16_rep(card, IF_CS_H_CMD,
+				&fw->data[sent],
+				count >> 1);
+
+		/* "Assert the download over interrupt command in the Host
+		 * status register" */
+		if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
+
+		/* "Assert the download over interrupt command in the Card
+		 * interrupt case register" */
+		if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
+
+		/* "The host polls the Card Status register ... for 50 ms before
+		   declaring a failure */
+		ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS,
+			IF_CS_C_S_CMD_DNLD_RDY);
+		if (ret < 0) {
+			lbs_pr_err("can't download helper at 0x%x, ret %d\n",
+				sent, ret);
+			goto done;
+		}
+
+		if (count == 0)
+			break;
+
+		sent += count;
+	}
+
+	release_firmware(fw);
+	ret = 0;
+
+done:
+	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+	return ret;
+}
+
+
+static int if_cs_prog_real(struct if_cs_card *card)
+{
+	const struct firmware *fw;
+	int ret = 0;
+	int retry = 0;
+	int len = 0;
+	int sent;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	/* TODO: make firmware file configurable */
+	ret = request_firmware(&fw, "libertas_cs.fw",
+		&handle_to_dev(card->p_dev));
+	if (ret) {
+		lbs_pr_err("can't load firmware\n");
+		ret = -ENODEV;
+		goto done;
+	}
+	lbs_deb_cs("fw size %d\n", fw->size);
+
+	ret = if_cs_poll_while_fw_download(card, IF_CS_C_SQ_READ_LOW, IF_CS_C_SQ_HELPER_OK);
+	if (ret < 0) {
+		int i;
+		lbs_pr_err("helper firmware doesn't answer\n");
+		for (i = 0; i < 0x50; i += 2)
+			printk(KERN_INFO "## HS %02x: %04x\n",
+				i, if_cs_read16(card, i));
+		goto err_release;
+	}
+
+	for (sent = 0; sent < fw->size; sent += len) {
+		len = if_cs_read16(card, IF_CS_C_SQ_READ_LOW);
+		/* printk(KERN_INFO "//HS %d loading %d of %d bytes\n",
+			__LINE__, sent, fw->size); */
+		if (len & 1) {
+			retry++;
+			lbs_pr_info("odd, need to retry this firmware block\n");
+		} else {
+			retry = 0;
+		}
+
+		if (retry > 20) {
+			lbs_pr_err("could not download firmware\n");
+			ret = -ENODEV;
+			goto err_release;
+		}
+		if (retry) {
+			sent -= len;
+		}
+
+
+		if_cs_write16(card, IF_CS_H_CMD_LEN, len);
+
+		if_cs_write16_rep(card, IF_CS_H_CMD,
+			&fw->data[sent],
+			(len+1) >> 1);
+		if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
+		if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
+
+		ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS,
+			IF_CS_C_S_CMD_DNLD_RDY);
+		if (ret < 0) {
+			lbs_pr_err("can't download firmware at 0x%x\n", sent);
+			goto err_release;
+		}
+	}
+
+	ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
+	if (ret < 0) {
+		lbs_pr_err("firmware download failed\n");
+		goto err_release;
+	}
+
+	ret = 0;
+	goto done;
+
+
+err_release:
+	release_firmware(fw);
+
+done:
+	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+	return ret;
+}
+
+
+
+/********************************************************************/
+/* Callback functions for libertas.ko                               */
+/********************************************************************/
+
+static int if_cs_register_dev(wlan_private *priv)
+{
+	struct if_cs_card *card = (struct if_cs_card *)priv->card;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	card->priv = priv;
+
+	return 0;
+}
+
+
+static int if_cs_unregister_dev(wlan_private *priv)
+{
+	lbs_deb_enter(LBS_DEB_CS);
+
+	/*
+	 * Nothing special here. Because the device's power gets turned off
+	 * anyway, there's no need to send a RESET command like in if_usb.c
+	 */
+
+	return 0;
+}
+
+
+/*
+ * This callback is a dummy. The reason is that the USB code needs
+ * to have various things set up in order to be able to download the
+ * firmware. That's not needed in our case.
+ *
+ * On the contrary, if libertas_add_card() has been called and we're
+ * then later called via libertas_activate_card(), but without a valid
+ * firmware, then it's quite tedious to tear down the half-installed
+ * card. Therefore, we download the firmware before calling adding/
+ * activating the card in the first place. If that doesn't work, we
+ * won't call into libertas.ko at all.
+ */
+
+static int if_cs_prog_firmware(wlan_private *priv)
+{
+	priv->adapter->fw_ready = 1;
+	return 0;
+}
+
+
+/* Send commands or data packets to the card */
+static int if_cs_host_to_card(wlan_private *priv, u8 type, u8 *buf, u16 nb)
+{
+	int ret = -1;
+
+	lbs_deb_enter_args(LBS_DEB_CS, "type %d, bytes %d", type, nb);
+
+	switch (type) {
+	case MVMS_DAT:
+		priv->dnld_sent = DNLD_CMD_SENT;
+		if_cs_send_data(priv, buf, nb);
+		ret = 0;
+		break;
+	case MVMS_CMD:
+		ret = if_cs_send_cmd(priv, buf, nb);
+		break;
+	default:
+		lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type);
+	}
+
+	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+	return ret;
+}
+
+
+static int if_cs_get_int_status(wlan_private *priv, u8 *ireg)
+{
+	struct if_cs_card *card = (struct if_cs_card *)priv->card;
+	//wlan_adapter *adapter = priv->adapter;
+	int ret = 0;
+	u16 int_cause;
+	u8 *cmdbuf;
+	*ireg = 0;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	if (priv->adapter->surpriseremoved)
+		goto out;
+
+	int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE) & IF_CS_C_IC_MASK;
+	if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause);
+
+	*ireg = if_cs_read16(card, IF_CS_C_STATUS) & IF_CS_C_S_MASK;
+	if_cs_enable_ints(card);
+
+	if (!*ireg)
+		goto sbi_get_int_status_exit;
+
+sbi_get_int_status_exit:
+
+	/* is there a data packet for us? */
+	if (*ireg & IF_CS_C_S_RX_UPLD_RDY) {
+		struct sk_buff *skb = if_cs_receive_data(priv);
+		libertas_process_rxed_packet(priv, skb);
+		*ireg &= ~IF_CS_C_S_RX_UPLD_RDY;
+	}
+
+	if (*ireg & IF_CS_C_S_TX_DNLD_RDY) {
+		priv->dnld_sent = DNLD_RES_RECEIVED;
+	}
+
+	/* Card has a command result for us */
+	if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
+		spin_lock(&priv->adapter->driver_lock);
+		if (!priv->adapter->cur_cmd) {
+			cmdbuf = priv->upld_buf;
+			priv->adapter->hisregcpy &= ~IF_CS_C_S_RX_UPLD_RDY;
+		} else {
+			cmdbuf = priv->adapter->cur_cmd->bufvirtualaddr;
+		}
+
+		ret = if_cs_receive_cmdres(priv, cmdbuf, &priv->upld_len);
+		spin_unlock(&priv->adapter->driver_lock);
+		if (ret < 0)
+			lbs_pr_err("could not receive cmd from card\n");
+	}
+
+out:
+	lbs_deb_leave_args(LBS_DEB_CS, "ret %d, ireg 0x%x, hisregcpy 0x%x", ret, *ireg, priv->adapter->hisregcpy);
+	return ret;
+}
+
+
+static int if_cs_read_event_cause(wlan_private *priv)
+{
+	lbs_deb_enter(LBS_DEB_CS);
+
+	priv->adapter->eventcause = (if_cs_read16(priv->card, IF_CS_C_STATUS) & IF_CS_C_S_STATUS_MASK) >> 5;
+	if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_HOST_EVENT);
+
+	return 0;
+}
+
+
+
+/********************************************************************/
+/* Card Services                                                    */
+/********************************************************************/
+
+/*
+ * After a card is removed, if_cs_release() will unregister the
+ * device, and release the PCMCIA configuration.  If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void if_cs_release(struct pcmcia_device *p_dev)
+{
+	struct if_cs_card *card = p_dev->priv;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	pcmcia_disable_device(p_dev);
+	free_irq(p_dev->irq.AssignedIRQ, card);
+	if (card->iobase)
+		ioport_unmap(card->iobase);
+
+	lbs_deb_leave(LBS_DEB_CS);
+}
+
+
+/*
+ * This creates an "instance" of the driver, allocating local data
+ * structures for one device.  The device is registered with Card
+ * Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a card
+ * insertion event.
+ */
+static int if_cs_probe(struct pcmcia_device *p_dev)
+{
+	int ret = -ENOMEM;
+	wlan_private *priv;
+	struct if_cs_card *card;
+	/* CIS parsing */
+	tuple_t tuple;
+	cisparse_t parse;
+	cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
+	cistpl_io_t *io = &cfg->io;
+	u_char buf[64];
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
+	if (!card) {
+		lbs_pr_err("error in kzalloc\n");
+		goto out;
+	}
+	card->p_dev = p_dev;
+	p_dev->priv = card;
+
+	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+	p_dev->irq.Handler = NULL;
+	p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
+
+	p_dev->conf.Attributes = 0;
+	p_dev->conf.IntType = INT_MEMORY_AND_IO;
+
+	tuple.Attributes = 0;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = sizeof(buf);
+	tuple.TupleOffset = 0;
+
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
+	    (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
+	    (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0)
+	{
+		lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
+		goto out1;
+	}
+
+	p_dev->conf.ConfigIndex = cfg->index;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1) {
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	}
+
+	/* IO window settings */
+	if (cfg->io.nwin != 1) {
+		lbs_pr_err("wrong CIS (check number of IO windows)\n");
+		ret = -ENODEV;
+		goto out1;
+	}
+	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+	p_dev->io.BasePort1 = io->win[0].base;
+	p_dev->io.NumPorts1 = io->win[0].len;
+
+	/* This reserves IO space but doesn't actually enable it */
+	ret = pcmcia_request_io(p_dev, &p_dev->io);
+	if (ret) {
+		lbs_pr_err("error in pcmcia_request_io\n");
+		goto out1;
+	}
+
+	/*
+	 * Allocate an interrupt line.  Note that this does not assign
+	 * a handler to the interrupt, unless the 'Handler' member of
+	 * the irq structure is initialized.
+	 */
+	if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
+		ret = pcmcia_request_irq(p_dev, &p_dev->irq);
+		if (ret) {
+			lbs_pr_err("error in pcmcia_request_irq\n");
+			goto out1;
+		}
+	}
+
+	/* Initialize io access */
+	card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
+	if (!card->iobase) {
+		lbs_pr_err("error in ioport_map\n");
+		ret = -EIO;
+		goto out1;
+	}
+
+	/*
+	 * This actually configures the PCMCIA socket -- setting up
+	 * the I/O windows and the interrupt mapping, and putting the
+	 * card and host interface into "Memory and IO" mode.
+	 */
+	ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
+	if (ret) {
+		lbs_pr_err("error in pcmcia_request_configuration\n");
+		goto out2;
+	}
+
+	/* Finally, report what we've done */
+	lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
+	       p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
+	       p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
+
+	if_cs_enable_ints(card);
+
+	/* Load the firmware early, before calling into libertas.ko */
+	ret = if_cs_prog_helper(card);
+	if (ret == 0)
+		ret = if_cs_prog_real(card);
+	if (ret)
+		goto out2;
+
+	/* Make this card known to the libertas driver */
+	priv = libertas_add_card(card, &p_dev->dev);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto out2;
+	}
+
+	/* Store pointers to our call-back functions */
+	priv->card = card;
+	priv->hw_register_dev     = if_cs_register_dev;
+	priv->hw_unregister_dev   = if_cs_unregister_dev;
+	priv->hw_prog_firmware    = if_cs_prog_firmware;
+	priv->hw_host_to_card     = if_cs_host_to_card;
+	priv->hw_get_int_status   = if_cs_get_int_status;
+	priv->hw_read_event_cause = if_cs_read_event_cause;
+
+	/* Now actually get the IRQ */
+	ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
+		IRQF_SHARED, DRV_NAME, card);
+	if (ret) {
+		lbs_pr_err("error in request_irq\n");
+		goto out3;
+	}
+
+	/* And finally bring the card up */
+	if (libertas_activate_card(priv) != 0) {
+		lbs_pr_err("could not activate card\n");
+		goto out3;
+	}
+
+	ret = 0;
+	goto out;
+
+out3:
+	libertas_remove_card(priv);
+out2:
+	ioport_unmap(card->iobase);
+out1:
+	pcmcia_disable_device(p_dev);
+out:
+	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+	return ret;
+}
+
+
+/*
+ * This deletes a driver "instance".  The device is de-registered with
+ * Card Services.  If it has been released, all local data structures
+ * are freed.  Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void if_cs_detach(struct pcmcia_device *p_dev)
+{
+	struct if_cs_card *card = p_dev->priv;
+
+	lbs_deb_enter(LBS_DEB_CS);
+
+	libertas_remove_card(card->priv);
+	if_cs_release(p_dev);
+	kfree(card);
+
+	lbs_deb_leave(LBS_DEB_CS);
+}
+
+
+
+/********************************************************************/
+/* Module initialization                                            */
+/********************************************************************/
+
+static struct pcmcia_device_id if_cs_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
+
+
+static struct pcmcia_driver libertas_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= DRV_NAME,
+	},
+	.probe		= if_cs_probe,
+	.remove		= if_cs_detach,
+	.id_table       = if_cs_ids,
+};
+
+
+static int __init if_cs_init(void)
+{
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CS);
+	ret = pcmcia_register_driver(&libertas_driver);
+	lbs_deb_leave(LBS_DEB_CS);
+	return ret;
+}
+
+
+static void __exit if_cs_exit(void)
+{
+	lbs_deb_enter(LBS_DEB_CS);
+	pcmcia_unregister_driver(&libertas_driver);
+	lbs_deb_leave(LBS_DEB_CS);
+}
+
+
+module_init(if_cs_init);
+module_exit(if_cs_exit);