Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 26955c07 编写于 作者: L Lee Jones 提交者： Linus Walleij
浏览文件
操作

dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers 

Devices which utilise DMA use the same device numbers for transmitting
and receiving. In this patch we encode the source and destination
information into one single attribute. We can subsequently exploit the
direction attribute to see which of the transfer directions are being
described. This also lessens the burden on platform data.

Cc: Dan Williams <djbw@fb.com>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Rabin Vincent <rabin@rab.in>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 4f8fc46c
显示空白变更内容
内联 并排
Showing with 207 addition and 326 deletion
arch/arm/mach-ux500/board-mop500-audio.c
浏览文件 @ 26955c07
......@@ -23,8 +23,7 @@ static struct stedma40_chan_cfg msp0_dma_rx = {
.high_priority = true,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
.src_info.psize = STEDMA40_PSIZE_LOG_4,
.dst_info.psize = STEDMA40_PSIZE_LOG_4,
......@@ -36,8 +35,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = {
.high_priority = true,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_DST_MEMORY,
.dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
.src_info.psize = STEDMA40_PSIZE_LOG_4,
.dst_info.psize = STEDMA40_PSIZE_LOG_4,
......@@ -55,8 +53,7 @@ static struct stedma40_chan_cfg msp1_dma_rx = {
.high_priority = true,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV30_MSP3,
.src_info.psize = STEDMA40_PSIZE_LOG_4,
.dst_info.psize = STEDMA40_PSIZE_LOG_4,
......@@ -68,8 +65,7 @@ static struct stedma40_chan_cfg msp1_dma_tx = {
.high_priority = true,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_DST_MEMORY,
.dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
.dev_type = DB8500_DMA_DEV30_MSP1,
.src_info.psize = STEDMA40_PSIZE_LOG_4,
.dst_info.psize = STEDMA40_PSIZE_LOG_4,
......@@ -87,8 +83,7 @@ static struct stedma40_chan_cfg msp2_dma_rx = {
.high_priority = true,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV14_MSP2,
/* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
.src_info.psize = STEDMA40_PSIZE_LOG_1,
......@@ -101,8 +96,7 @@ static struct stedma40_chan_cfg msp2_dma_tx = {
.high_priority = true,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_DST_MEMORY,
.dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
.dev_type = DB8500_DMA_DEV14_MSP2,
.src_info.psize = STEDMA40_PSIZE_LOG_4,
.dst_info.psize = STEDMA40_PSIZE_LOG_4,
......
arch/arm/mach-ux500/board-mop500-sdi.c
浏览文件 @ 26955c07
......@@ -35,8 +35,7 @@
struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV29_SD_MM0,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
......@@ -44,8 +43,7 @@ struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
.dev_type = DB8500_DMA_DEV29_SD_MM0,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
......@@ -88,8 +86,7 @@ void mop500_sdi_tc35892_init(struct device *parent)
static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV32_SD_MM1,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
......@@ -97,8 +94,7 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
.dev_type = DB8500_DMA_DEV32_SD_MM1,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
......@@ -125,8 +121,7 @@ struct mmci_platform_data mop500_sdi1_data = {
struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV28_SD_MM2,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
......@@ -134,8 +129,7 @@ struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
.dev_type = DB8500_DMA_DEV28_SD_MM2,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
......@@ -163,8 +157,7 @@ struct mmci_platform_data mop500_sdi2_data = {
struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV42_SD_MM4,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
......@@ -172,8 +165,7 @@ struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
.dev_type = DB8500_DMA_DEV42_SD_MM4,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
......
arch/arm/mach-ux500/board-mop500.c
浏览文件 @ 26955c07
......@@ -425,8 +425,7 @@ void mop500_snowball_ethernet_clock_enable(void)
static struct cryp_platform_data u8500_cryp1_platform_data = {
.mem_to_engine = {
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV48_CAC1_TX,
.dev_type = DB8500_DMA_DEV48_CAC1,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
.mode = STEDMA40_MODE_LOGICAL,
......@@ -435,8 +434,7 @@ static struct cryp_platform_data u8500_cryp1_platform_data = {
},
.engine_to_mem = {
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV48_CAC1_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV48_CAC1,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
.mode = STEDMA40_MODE_LOGICAL,
......@@ -447,8 +445,7 @@ static struct cryp_platform_data u8500_cryp1_platform_data = {
static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV50_HAC1_TX,
.dev_type = DB8500_DMA_DEV50_HAC1_TX,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
.mode = STEDMA40_MODE_LOGICAL,
......@@ -471,8 +468,7 @@ static struct platform_device *mop500_platform_devs[] __initdata = {
static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV8_SSP0_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV8_SSP0,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
......@@ -480,8 +476,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV8_SSP0_TX,
.dev_type = DB8500_DMA_DEV8_SSP0,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
......@@ -512,8 +507,7 @@ static void __init mop500_spi_init(struct device *parent)
static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV13_UART0_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV13_UART0,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
......@@ -521,8 +515,7 @@ static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV13_UART0_TX,
.dev_type = DB8500_DMA_DEV13_UART0,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
......@@ -530,8 +523,7 @@ static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV12_UART1_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV12_UART1,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
......@@ -539,8 +531,7 @@ static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV12_UART1_TX,
.dev_type = DB8500_DMA_DEV12_UART1,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
......@@ -548,8 +539,7 @@ static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV11_UART2_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.dev_type = DB8500_DMA_DEV11_UART2,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
......@@ -557,8 +547,7 @@ static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV11_UART2_TX,
.dev_type = DB8500_DMA_DEV11_UART2,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
};
......
arch/arm/mach-ux500/cpu-db8500.c
浏览文件 @ 26955c07
......@@ -163,25 +163,25 @@ static void __init db8500_add_gpios(struct device *parent)
}
static int usb_db8500_rx_dma_cfg[] = {
DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
DB8500_DMA_DEV39_USB_OTG_IEP_8
DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
};
static int usb_db8500_tx_dma_cfg[] = {
DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
DB8500_DMA_DEV39_USB_OTG_OEP_8
DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
};
static const char *db8500_read_soc_id(void)
......
arch/arm/mach-ux500/devices-db8500.c
浏览文件 @ 26955c07
......@@ -50,74 +50,74 @@ static struct resource dma40_resources[] = {
*/
static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
/* MUSB - these will be runtime-reconfigured */
[DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1,
[DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1,
[DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1,
[DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1,
[DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1,
[DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1,
[DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1,
[DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1,
[DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8] = -1,
[DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15] = -1,
[DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14] = -1,
[DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13] = -1,
[DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12] = -1,
[DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11] = -1,
[DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10] = -1,
[DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9] = -1,
/* PrimeCells - run-time configured */
[DB8500_DMA_DEV0_SPI0_TX] = -1,
[DB8500_DMA_DEV1_SD_MMC0_TX] = -1,
[DB8500_DMA_DEV2_SD_MMC1_TX] = -1,
[DB8500_DMA_DEV3_SD_MMC2_TX] = -1,
[DB8500_DMA_DEV8_SSP0_TX] = -1,
[DB8500_DMA_DEV9_SSP1_TX] = -1,
[DB8500_DMA_DEV11_UART2_TX] = -1,
[DB8500_DMA_DEV12_UART1_TX] = -1,
[DB8500_DMA_DEV13_UART0_TX] = -1,
[DB8500_DMA_DEV28_SD_MM2_TX] = -1,
[DB8500_DMA_DEV29_SD_MM0_TX] = -1,
[DB8500_DMA_DEV32_SD_MM1_TX] = -1,
[DB8500_DMA_DEV33_SPI2_TX] = -1,
[DB8500_DMA_DEV35_SPI1_TX] = -1,
[DB8500_DMA_DEV40_SPI3_TX] = -1,
[DB8500_DMA_DEV41_SD_MM3_TX] = -1,
[DB8500_DMA_DEV42_SD_MM4_TX] = -1,
[DB8500_DMA_DEV43_SD_MM5_TX] = -1,
[DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET,
[DB8500_DMA_DEV0_SPI0] = -1,
[DB8500_DMA_DEV1_SD_MMC0] = -1,
[DB8500_DMA_DEV2_SD_MMC1] = -1,
[DB8500_DMA_DEV3_SD_MMC2] = -1,
[DB8500_DMA_DEV8_SSP0] = -1,
[DB8500_DMA_DEV9_SSP1] = -1,
[DB8500_DMA_DEV11_UART2] = -1,
[DB8500_DMA_DEV12_UART1] = -1,
[DB8500_DMA_DEV13_UART0] = -1,
[DB8500_DMA_DEV28_SD_MM2] = -1,
[DB8500_DMA_DEV29_SD_MM0] = -1,
[DB8500_DMA_DEV32_SD_MM1] = -1,
[DB8500_DMA_DEV33_SPI2] = -1,
[DB8500_DMA_DEV35_SPI1] = -1,
[DB8500_DMA_DEV40_SPI3] = -1,
[DB8500_DMA_DEV41_SD_MM3] = -1,
[DB8500_DMA_DEV42_SD_MM4] = -1,
[DB8500_DMA_DEV43_SD_MM5] = -1,
[DB8500_DMA_DEV14_MSP2] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV30_MSP1] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV31_MSP0_SLIM0_CH0] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV48_CAC1] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET,
[DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET,
};
/* Mapping between source event lines and physical device address */
static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
/* MUSB - these will be runtime-reconfigured */
[DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1,
[DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1,
[DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1,
[DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1,
[DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1,
[DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1,
[DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1,
[DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1,
[DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8] = -1,
[DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15] = -1,
[DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14] = -1,
[DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13] = -1,
[DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12] = -1,
[DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11] = -1,
[DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10] = -1,
[DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9] = -1,
/* PrimeCells */
[DB8500_DMA_DEV0_SPI0_RX] = -1,
[DB8500_DMA_DEV1_SD_MMC0_RX] = -1,
[DB8500_DMA_DEV2_SD_MMC1_RX] = -1,
[DB8500_DMA_DEV3_SD_MMC2_RX] = -1,
[DB8500_DMA_DEV8_SSP0_RX] = -1,
[DB8500_DMA_DEV9_SSP1_RX] = -1,
[DB8500_DMA_DEV11_UART2_RX] = -1,
[DB8500_DMA_DEV12_UART1_RX] = -1,
[DB8500_DMA_DEV13_UART0_RX] = -1,
[DB8500_DMA_DEV28_SD_MM2_RX] = -1,
[DB8500_DMA_DEV29_SD_MM0_RX] = -1,
[DB8500_DMA_DEV32_SD_MM1_RX] = -1,
[DB8500_DMA_DEV33_SPI2_RX] = -1,
[DB8500_DMA_DEV35_SPI1_RX] = -1,
[DB8500_DMA_DEV40_SPI3_RX] = -1,
[DB8500_DMA_DEV41_SD_MM3_RX] = -1,
[DB8500_DMA_DEV42_SD_MM4_RX] = -1,
[DB8500_DMA_DEV43_SD_MM5_RX] = -1,
[DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
[DB8500_DMA_DEV0_SPI0] = -1,
[DB8500_DMA_DEV1_SD_MMC0] = -1,
[DB8500_DMA_DEV2_SD_MMC1] = -1,
[DB8500_DMA_DEV3_SD_MMC2] = -1,
[DB8500_DMA_DEV8_SSP0] = -1,
[DB8500_DMA_DEV9_SSP1] = -1,
[DB8500_DMA_DEV11_UART2] = -1,
[DB8500_DMA_DEV12_UART1] = -1,
[DB8500_DMA_DEV13_UART0] = -1,
[DB8500_DMA_DEV28_SD_MM2] = -1,
[DB8500_DMA_DEV29_SD_MM0] = -1,
[DB8500_DMA_DEV32_SD_MM1] = -1,
[DB8500_DMA_DEV33_SPI2] = -1,
[DB8500_DMA_DEV35_SPI1] = -1,
[DB8500_DMA_DEV40_SPI3] = -1,
[DB8500_DMA_DEV41_SD_MM3] = -1,
[DB8500_DMA_DEV42_SD_MM4] = -1,
[DB8500_DMA_DEV43_SD_MM5] = -1,
[DB8500_DMA_DEV14_MSP2] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV30_MSP3] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV31_MSP0_SLIM0_CH0] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
[DB8500_DMA_DEV48_CAC1] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
};
static struct stedma40_platform_data dma40_plat_data = {
......
arch/arm/mach-ux500/ste-dma40-db8500.h
浏览文件 @ 26955c07
......@@ -12,133 +12,74 @@
#define DB8500_DMA_NR_DEV 64
enum dma_src_dev_type {
DB8500_DMA_DEV0_SPI0_RX = 0,
DB8500_DMA_DEV1_SD_MMC0_RX = 1,
DB8500_DMA_DEV2_SD_MMC1_RX = 2,
DB8500_DMA_DEV3_SD_MMC2_RX = 3,
DB8500_DMA_DEV4_I2C1_RX = 4,
DB8500_DMA_DEV5_I2C3_RX = 5,
DB8500_DMA_DEV6_I2C2_RX = 6,
DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
DB8500_DMA_DEV8_SSP0_RX = 8,
DB8500_DMA_DEV9_SSP1_RX = 9,
DB8500_DMA_DEV10_MCDE_RX = 10,
DB8500_DMA_DEV11_UART2_RX = 11,
DB8500_DMA_DEV12_UART1_RX = 12,
DB8500_DMA_DEV13_UART0_RX = 13,
DB8500_DMA_DEV14_MSP2_RX = 14,
DB8500_DMA_DEV15_I2C0_RX = 15,
DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
DB8500_DMA_DEV28_SD_MM2_RX = 28,
DB8500_DMA_DEV29_SD_MM0_RX = 29,
DB8500_DMA_DEV30_MSP1_RX = 30,
/*
* Unless otherwise specified, all channels numbers are used for
* TX & RX, and can be used for either source or destination
* channels.
*/
enum dma_dev_type {
DB8500_DMA_DEV0_SPI0 = 0,
DB8500_DMA_DEV1_SD_MMC0 = 1,
DB8500_DMA_DEV2_SD_MMC1 = 2,
DB8500_DMA_DEV3_SD_MMC2 = 3,
DB8500_DMA_DEV4_I2C1 = 4,
DB8500_DMA_DEV5_I2C3 = 5,
DB8500_DMA_DEV6_I2C2 = 6,
DB8500_DMA_DEV7_I2C4 = 7, /* Only on V1 and later */
DB8500_DMA_DEV8_SSP0 = 8,
DB8500_DMA_DEV9_SSP1 = 9,
DB8500_DMA_DEV10_MCDE_RX = 10, /* RX only */
DB8500_DMA_DEV11_UART2 = 11,
DB8500_DMA_DEV12_UART1 = 12,
DB8500_DMA_DEV13_UART0 = 13,
DB8500_DMA_DEV14_MSP2 = 14,
DB8500_DMA_DEV15_I2C0 = 15,
DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16,
DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17,
DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18,
DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19,
DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20,
DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21,
DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22,
DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23,
DB8500_DMA_DEV24_SXA0 = 24,
DB8500_DMA_DEV25_SXA1 = 25,
DB8500_DMA_DEV26_SXA2 = 26,
DB8500_DMA_DEV27_SXA3 = 27,
DB8500_DMA_DEV28_SD_MM2 = 28,
DB8500_DMA_DEV29_SD_MM0 = 29,
DB8500_DMA_DEV30_MSP1 = 30,
/* On DB8500v2, MSP3 RX replaces MSP1 RX */
DB8500_DMA_DEV30_MSP3_RX = 30,
DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
DB8500_DMA_DEV32_SD_MM1_RX = 32,
DB8500_DMA_DEV33_SPI2_RX = 33,
DB8500_DMA_DEV34_I2C3_RX2 = 34,
DB8500_DMA_DEV35_SPI1_RX = 35,
DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
DB8500_DMA_DEV40_SPI3_RX = 40,
DB8500_DMA_DEV41_SD_MM3_RX = 41,
DB8500_DMA_DEV42_SD_MM4_RX = 42,
DB8500_DMA_DEV43_SD_MM5_RX = 43,
DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
DB8500_DMA_DEV48_CAC1_RX = 48,
/* 49, 50 and 51 are not used */
DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
/* 56, 57, 58, 59 and 60 are not used */
DB8500_DMA_DEV61_CAC0_RX = 61,
/* 62 and 63 are not used */
};
enum dma_dest_dev_type {
DB8500_DMA_DEV0_SPI0_TX = 0,
DB8500_DMA_DEV1_SD_MMC0_TX = 1,
DB8500_DMA_DEV2_SD_MMC1_TX = 2,
DB8500_DMA_DEV3_SD_MMC2_TX = 3,
DB8500_DMA_DEV4_I2C1_TX = 4,
DB8500_DMA_DEV5_I2C3_TX = 5,
DB8500_DMA_DEV6_I2C2_TX = 6,
DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
DB8500_DMA_DEV8_SSP0_TX = 8,
DB8500_DMA_DEV9_SSP1_TX = 9,
/* 10 is not used*/
DB8500_DMA_DEV11_UART2_TX = 11,
DB8500_DMA_DEV12_UART1_TX = 12,
DB8500_DMA_DEV13_UART0_TX = 13,
DB8500_DMA_DEV14_MSP2_TX = 14,
DB8500_DMA_DEV15_I2C0_TX = 15,
DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
DB8500_DMA_DEV28_SD_MM2_TX = 28,
DB8500_DMA_DEV29_SD_MM0_TX = 29,
DB8500_DMA_DEV30_MSP1_TX = 30,
DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
DB8500_DMA_DEV32_SD_MM1_TX = 32,
DB8500_DMA_DEV33_SPI2_TX = 33,
DB8500_DMA_DEV34_I2C3_TX2 = 34,
DB8500_DMA_DEV35_SPI1_TX = 35,
DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
DB8500_DMA_DEV40_SPI3_TX = 40,
DB8500_DMA_DEV41_SD_MM3_TX = 41,
DB8500_DMA_DEV42_SD_MM4_TX = 42,
DB8500_DMA_DEV43_SD_MM5_TX = 43,
DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
DB8500_DMA_DEV48_CAC1_TX = 48,
DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
DB8500_DMA_DEV50_HAC1_TX = 50,
DB8500_DMA_MEMCPY_TX_0 = 51,
DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
DB8500_DMA_MEMCPY_TX_1 = 56,
DB8500_DMA_MEMCPY_TX_2 = 57,
DB8500_DMA_MEMCPY_TX_3 = 58,
DB8500_DMA_MEMCPY_TX_4 = 59,
DB8500_DMA_MEMCPY_TX_5 = 60,
DB8500_DMA_DEV61_CAC0_TX = 61,
DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
DB8500_DMA_DEV63_HAC0_TX = 63,
DB8500_DMA_DEV30_MSP3 = 30,
DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31,
DB8500_DMA_DEV32_SD_MM1 = 32,
DB8500_DMA_DEV33_SPI2 = 33,
DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34,
DB8500_DMA_DEV35_SPI1 = 35,
DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36,
DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37,
DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38,
DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39,
DB8500_DMA_DEV40_SPI3 = 40,
DB8500_DMA_DEV41_SD_MM3 = 41,
DB8500_DMA_DEV42_SD_MM4 = 42,
DB8500_DMA_DEV43_SD_MM5 = 43,
DB8500_DMA_DEV44_SXA4 = 44,
DB8500_DMA_DEV45_SXA5 = 45,
DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46,
DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47,
DB8500_DMA_DEV48_CAC1 = 48,
DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, /* TX only */
DB8500_DMA_DEV50_HAC1_TX = 50, /* TX only */
DB8500_DMA_MEMCPY_TX_0 = 51, /* TX only */
DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52,
DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53,
DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54,
DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55,
/* 56 -> 60 are channels reserved for memcpy only */
DB8500_DMA_DEV61_CAC0 = 61,
DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, /* TX only */
DB8500_DMA_DEV63_HAC0_TX = 63, /* TX only */
};
#endif
arch/arm/mach-ux500/usb.c
浏览文件 @ 26955c07
......@@ -15,7 +15,6 @@
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
.dir = STEDMA40_PERIPH_TO_MEM, \
.dst_dev_type = STEDMA40_DEV_DST_MEMORY, \
.src_info.data_width = STEDMA40_WORD_WIDTH, \
.dst_info.data_width = STEDMA40_WORD_WIDTH, \
.src_info.psize = STEDMA40_PSIZE_LOG_16, \
......@@ -25,7 +24,6 @@
#define MUSB_DMA40_TX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
.dir = STEDMA40_MEM_TO_PERIPH, \
.src_dev_type = STEDMA40_DEV_SRC_MEMORY, \
.src_info.data_width = STEDMA40_WORD_WIDTH, \
.dst_info.data_width = STEDMA40_WORD_WIDTH, \
.src_info.psize = STEDMA40_PSIZE_LOG_16, \
......@@ -125,20 +123,20 @@ struct platform_device ux500_musb_device = {
.resource = usb_resources,
};
static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
{
u32 idx;
for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx];
musb_dma_rx_ch[idx].dev_type = dev_type[idx];
}
static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
{
u32 idx;
for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
musb_dma_tx_ch[idx].dev_type = dev_type[idx];
}
void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
......
drivers/dma/ste_dma40.c
浏览文件 @ 26955c07
......@@ -1302,21 +1302,17 @@ static void __d40_config_set_event(struct d40_chan *d40c,
static void d40_config_set_event(struct d40_chan *d40c,
enum d40_events event_type)
{
u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
/* Enable event line connected to device (or memcpy) */
if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
(d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) {
u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type);
(d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
__d40_config_set_event(d40c, event_type, event,
D40_CHAN_REG_SSLNK);
}
if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) {
u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM)
__d40_config_set_event(d40c, event_type, event,
D40_CHAN_REG_SDLNK);
}
}
static u32 d40_chan_has_events(struct d40_chan *d40c)
......@@ -1758,8 +1754,6 @@ static int d40_validate_conf(struct d40_chan *d40c,
struct stedma40_chan_cfg *conf)
{
int res = 0;
u32 dst_event_group = D40_TYPE_TO_GROUP(conf->dst_dev_type);
u32 src_event_group = D40_TYPE_TO_GROUP(conf->src_dev_type);
bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
if (!conf->dir) {
......@@ -1767,44 +1761,26 @@ static int d40_validate_conf(struct d40_chan *d40c,
res = -EINVAL;
}
if (conf->dst_dev_type != STEDMA40_DEV_DST_MEMORY &&
d40c->base->plat_data->dev_tx[conf->dst_dev_type] == 0 &&
d40c->runtime_addr == 0) {
chan_err(d40c, "Invalid TX channel address (%d)\n",
conf->dst_dev_type);
res = -EINVAL;
}
if (conf->src_dev_type != STEDMA40_DEV_SRC_MEMORY &&
d40c->base->plat_data->dev_rx[conf->src_dev_type] == 0 &&
d40c->runtime_addr == 0) {
chan_err(d40c, "Invalid RX channel address (%d)\n",
conf->src_dev_type);
if ((is_log && conf->dev_type > d40c->base->num_log_chans) ||
(!is_log && conf->dev_type > d40c->base->num_phy_chans) ||
(conf->dev_type < 0)) {
chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type);
res = -EINVAL;
}
if (conf->dir == STEDMA40_MEM_TO_PERIPH &&
conf->dst_dev_type == STEDMA40_DEV_DST_MEMORY) {
chan_err(d40c, "Invalid dst\n");
d40c->base->plat_data->dev_tx[conf->dev_type] == 0 &&
d40c->runtime_addr == 0) {
chan_err(d40c, "Invalid TX channel address (%d)\n",
conf->dev_type);
res = -EINVAL;
}
if (conf->dir == STEDMA40_PERIPH_TO_MEM &&
conf->src_dev_type == STEDMA40_DEV_SRC_MEMORY) {
chan_err(d40c, "Invalid src\n");
res = -EINVAL;
}
if (conf->src_dev_type == STEDMA40_DEV_SRC_MEMORY &&
conf->dst_dev_type == STEDMA40_DEV_DST_MEMORY && is_log) {
chan_err(d40c, "No event line\n");
res = -EINVAL;
}
if (conf->dir == STEDMA40_PERIPH_TO_PERIPH &&
(src_event_group != dst_event_group)) {
chan_err(d40c, "Invalid event group\n");
d40c->base->plat_data->dev_rx[conf->dev_type] == 0 &&
d40c->runtime_addr == 0) {
chan_err(d40c, "Invalid RX channel address (%d)\n",
conf->dev_type);
res = -EINVAL;
}
......@@ -1925,7 +1901,7 @@ static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src,
static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
{
int dev_type;
int dev_type = d40c->dma_cfg.dev_type;
int event_group;
int event_line;
struct d40_phy_res *phys;
......@@ -1940,13 +1916,11 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
num_phy_chans = d40c->base->num_phy_chans;
if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
dev_type = d40c->dma_cfg.src_dev_type;
log_num = 2 * dev_type;
is_src = true;
} else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
/* dst event lines are used for logical memcpy */
dev_type = d40c->dma_cfg.dst_dev_type;
log_num = 2 * dev_type + 1;
is_src = false;
} else
......@@ -2058,8 +2032,7 @@ static int d40_config_memcpy(struct d40_chan *d40c)
if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
d40c->dma_cfg = dma40_memcpy_conf_log;
d40c->dma_cfg.src_dev_type = STEDMA40_DEV_SRC_MEMORY;
d40c->dma_cfg.dst_dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
} else if (dma_has_cap(DMA_MEMCPY, cap) &&
dma_has_cap(DMA_SLAVE, cap)) {
......@@ -2076,7 +2049,7 @@ static int d40_free_dma(struct d40_chan *d40c)
{
int res = 0;
u32 event;
u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
struct d40_phy_res *phy = d40c->phy_chan;
bool is_src;
......@@ -2095,13 +2068,11 @@ static int d40_free_dma(struct d40_chan *d40c)
}
if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM)
is_src = false;
} else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type);
else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
is_src = true;
} else {
else {
chan_err(d40c, "Unknown direction\n");
return -EINVAL;
}
......@@ -2142,7 +2113,7 @@ static bool d40_is_paused(struct d40_chan *d40c)
unsigned long flags;
void __iomem *active_reg;
u32 status;
u32 event;
u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
spin_lock_irqsave(&d40c->lock, flags);
......@@ -2163,10 +2134,8 @@ static bool d40_is_paused(struct d40_chan *d40c)
if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
status = readl(chanbase + D40_CHAN_REG_SDLNK);
} else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type);
status = readl(chanbase + D40_CHAN_REG_SSLNK);
} else {
chan_err(d40c, "Unknown direction\n");
......@@ -2308,9 +2277,9 @@ d40_get_dev_addr(struct d40_chan *chan, enum dma_transfer_direction direction)
return chan->runtime_addr;
if (direction == DMA_DEV_TO_MEM)
addr = plat->dev_rx[cfg->src_dev_type];
addr = plat->dev_rx[cfg->dev_type];
else if (direction == DMA_MEM_TO_DEV)
addr = plat->dev_tx[cfg->dst_dev_type];
addr = plat->dev_tx[cfg->dev_type];
return addr;
}
......@@ -2441,11 +2410,11 @@ static void d40_set_prio_realtime(struct d40_chan *d40c)
if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
(d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
__d40_set_prio_rt(d40c, d40c->dma_cfg.src_dev_type, true);
__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
if ((d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH) ||
(d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
__d40_set_prio_rt(d40c, d40c->dma_cfg.dst_dev_type, false);
__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
}
/* DMA ENGINE functions */
......@@ -2489,10 +2458,10 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
d40c->lcpa = d40c->base->lcpa_base +
d40c->dma_cfg.src_dev_type * D40_LCPA_CHAN_SIZE;
d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
else
d40c->lcpa = d40c->base->lcpa_base +
d40c->dma_cfg.dst_dev_type *
d40c->dma_cfg.dev_type *
D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
}
......@@ -2755,7 +2724,7 @@ static int d40_set_runtime_config(struct dma_chan *chan,
if (config->direction == DMA_DEV_TO_MEM) {
dma_addr_t dev_addr_rx =
d40c->base->plat_data->dev_rx[cfg->src_dev_type];
d40c->base->plat_data->dev_rx[cfg->dev_type];
config_addr = config->src_addr;
if (dev_addr_rx)
......@@ -2778,7 +2747,7 @@ static int d40_set_runtime_config(struct dma_chan *chan,
} else if (config->direction == DMA_MEM_TO_DEV) {
dma_addr_t dev_addr_tx =
d40c->base->plat_data->dev_tx[cfg->dst_dev_type];
d40c->base->plat_data->dev_tx[cfg->dev_type];
config_addr = config->dst_addr;
if (dev_addr_tx)
......
drivers/dma/ste_dma40_ll.c
浏览文件 @ 26955c07
......@@ -63,7 +63,7 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
(cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
/* Set master port to 1 */
src |= 1 << D40_SREG_CFG_MST_POS;
src |= D40_TYPE_TO_EVENT(cfg->src_dev_type);
src |= D40_TYPE_TO_EVENT(cfg->dev_type);
if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
src |= 1 << D40_SREG_CFG_PHY_TM_POS;
......@@ -74,7 +74,7 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
(cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
/* Set master port to 1 */
dst |= 1 << D40_SREG_CFG_MST_POS;
dst |= D40_TYPE_TO_EVENT(cfg->dst_dev_type);
dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
......
include/linux/platform_data/dma-ste-dma40.h
浏览文件 @ 26955c07
......@@ -109,8 +109,7 @@ struct stedma40_half_channel_info {
* version 3+, i.e DB8500v2+
* @mode: channel mode: physical, logical, or operation
* @mode_opt: options for the chosen channel mode
* @src_dev_type: Src device type
* @dst_dev_type: Dst device type
* @dev_type: src/dst device type (driver uses dir to figure out which)
* @src_info: Parameters for dst half channel
* @dst_info: Parameters for dst half channel
* @use_fixed_channel: if true, use physical channel specified by phy_channel
......@@ -126,8 +125,7 @@ struct stedma40_chan_cfg {
bool realtime;
enum stedma40_mode mode;
enum stedma40_mode_opt mode_opt;
int src_dev_type;
int dst_dev_type;
int dev_type;
struct stedma40_half_channel_info src_info;
struct stedma40_half_channel_info dst_info;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或