diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 533ce2c9435b6c61d9528b46be204fe5efd420d8..9d64e321e8c010b6cd8b4f2b141ab9babcd2785d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -393,6 +393,7 @@ config MFD_STMPE
 
 		STMPE811: GPIO, Touchscreen
 		STMPE1601: GPIO, Keypad
+		STMPE1801: GPIO, Keypad
 		STMPE2401: GPIO, Keypad
 		STMPE2403: GPIO, Keypad
 
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index fd5fcb63068548d57c44ed3cd0d777228fdbcaec..0da02e11d58e30a6b935c0f2bf0d5173fb4c9440 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -75,6 +75,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
 	{ "stmpe801", STMPE801 },
 	{ "stmpe811", STMPE811 },
 	{ "stmpe1601", STMPE1601 },
+	{ "stmpe1801", STMPE1801 },
 	{ "stmpe2401", STMPE2401 },
 	{ "stmpe2403", STMPE2403 },
 	{ }
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index bc858777799389fcd30956788f6fb38fbe735fd8..bbccd514d3ec8835a47acafb1e669af0dfd0954c 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/mfd/core.h>
+#include <linux/delay.h>
 #include "stmpe.h"
 
 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
@@ -642,6 +643,88 @@ static struct stmpe_variant_info stmpe1601 = {
 	.enable_autosleep	= stmpe1601_autosleep,
 };
 
+/*
+ * STMPE1801
+ */
+static const u8 stmpe1801_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE1801_REG_CHIP_ID,
+	[STMPE_IDX_ICR_LSB]	= STMPE1801_REG_INT_CTRL_LOW,
+	[STMPE_IDX_IER_LSB]	= STMPE1801_REG_INT_EN_MASK_LOW,
+	[STMPE_IDX_ISR_LSB]	= STMPE1801_REG_INT_STA_LOW,
+	[STMPE_IDX_GPMR_LSB]	= STMPE1801_REG_GPIO_MP_LOW,
+	[STMPE_IDX_GPSR_LSB]	= STMPE1801_REG_GPIO_SET_LOW,
+	[STMPE_IDX_GPCR_LSB]	= STMPE1801_REG_GPIO_CLR_LOW,
+	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
+	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
+	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
+	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
+};
+
+static struct stmpe_variant_block stmpe1801_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= STMPE1801_IRQ_GPIOC,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+	{
+		.cell	= &stmpe_keypad_cell,
+		.irq	= STMPE1801_IRQ_KEYPAD,
+		.block	= STMPE_BLOCK_KEYPAD,
+	},
+};
+
+static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
+			    bool enable)
+{
+	unsigned int mask = 0;
+	if (blocks & STMPE_BLOCK_GPIO)
+		mask |= STMPE1801_MSK_INT_EN_GPIO;
+
+	if (blocks & STMPE_BLOCK_KEYPAD)
+		mask |= STMPE1801_MSK_INT_EN_KPC;
+
+	return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
+				enable ? mask : 0);
+}
+
+static int stmpe1801_reset(struct stmpe *stmpe)
+{
+	unsigned long timeout;
+	int ret = 0;
+
+	ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
+		STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
+	if (ret < 0)
+		return ret;
+
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (time_before(jiffies, timeout)) {
+		ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
+		if (ret < 0)
+			return ret;
+		if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
+			return 0;
+		usleep_range(100, 200);
+	};
+	return -EIO;
+}
+
+static struct stmpe_variant_info stmpe1801 = {
+	.name		= "stmpe1801",
+	.id_val		= STMPE1801_ID,
+	.id_mask	= 0xfff0,
+	.num_gpios	= 18,
+	.af_bits	= 0,
+	.regs		= stmpe1801_regs,
+	.blocks		= stmpe1801_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe1801_blocks),
+	.num_irqs	= STMPE1801_NR_INTERNAL_IRQS,
+	.enable		= stmpe1801_enable,
+	/* stmpe1801 do not have any gpio alternate function */
+	.get_altfunc	= NULL,
+};
+
 /*
  * STMPE24XX
  */
@@ -740,6 +823,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
 	[STMPE801]	= &stmpe801,
 	[STMPE811]	= &stmpe811,
 	[STMPE1601]	= &stmpe1601,
+	[STMPE1801]	= &stmpe1801,
 	[STMPE2401]	= &stmpe2401,
 	[STMPE2403]	= &stmpe2403,
 };
@@ -759,7 +843,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 	struct stmpe *stmpe = data;
 	struct stmpe_variant_info *variant = stmpe->variant;
 	int num = DIV_ROUND_UP(variant->num_irqs, 8);
-	u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+	u8 israddr;
 	u8 isr[num];
 	int ret;
 	int i;
@@ -771,6 +855,11 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 		return IRQ_HANDLED;
 	}
 
+	if (variant->id_val == STMPE1801_ID)
+		israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
+	else
+		israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+
 	ret = stmpe_block_read(stmpe, israddr, num, isr);
 	if (ret < 0)
 		return IRQ_NONE;
@@ -938,6 +1027,12 @@ static int stmpe_chip_init(struct stmpe *stmpe)
 	if (ret)
 		return ret;
 
+	if (id == STMPE1801_ID)	{
+		ret =  stmpe1801_reset(stmpe);
+		if (ret < 0)
+			return ret;
+	}
+
 	if (stmpe->irq >= 0) {
 		if (id == STMPE801_ID)
 			icr = STMPE801_REG_SYS_CTRL_INT_EN;
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 7b8e13f5b764dc5fde59a8dcb8389820abe017cd..ff2b09ba8797cfc214d36fada42efe1f1b64a807 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -198,6 +198,55 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK	(0x7)
 #define STPME1601_AUTOSLEEP_ENABLE		(1 << 3)
 
+/*
+ * STMPE1801
+ */
+#define STMPE1801_ID			0xc110
+#define STMPE1801_NR_INTERNAL_IRQS	5
+#define STMPE1801_IRQ_KEYPAD_COMBI	4
+#define STMPE1801_IRQ_GPIOC		3
+#define STMPE1801_IRQ_KEYPAD_OVER	2
+#define STMPE1801_IRQ_KEYPAD		1
+#define STMPE1801_IRQ_WAKEUP		0
+
+#define STMPE1801_REG_CHIP_ID			0x00
+#define STMPE1801_REG_SYS_CTRL			0x02
+#define STMPE1801_REG_INT_CTRL_LOW		0x04
+#define STMPE1801_REG_INT_EN_MASK_LOW		0x06
+#define STMPE1801_REG_INT_STA_LOW		0x08
+#define STMPE1801_REG_INT_EN_GPIO_MASK_LOW	0x0A
+#define STMPE1801_REG_INT_EN_GPIO_MASK_MID	0x0B
+#define STMPE1801_REG_INT_EN_GPIO_MASK_HIGH	0x0C
+#define STMPE1801_REG_INT_STA_GPIO_LOW		0x0D
+#define STMPE1801_REG_INT_STA_GPIO_MID		0x0E
+#define STMPE1801_REG_INT_STA_GPIO_HIGH		0x0F
+#define STMPE1801_REG_GPIO_SET_LOW		0x10
+#define STMPE1801_REG_GPIO_SET_MID		0x11
+#define STMPE1801_REG_GPIO_SET_HIGH		0x12
+#define STMPE1801_REG_GPIO_CLR_LOW		0x13
+#define STMPE1801_REG_GPIO_CLR_MID		0x14
+#define STMPE1801_REG_GPIO_CLR_HIGH		0x15
+#define STMPE1801_REG_GPIO_MP_LOW		0x16
+#define STMPE1801_REG_GPIO_MP_MID		0x17
+#define STMPE1801_REG_GPIO_MP_HIGH		0x18
+#define STMPE1801_REG_GPIO_SET_DIR_LOW		0x19
+#define STMPE1801_REG_GPIO_SET_DIR_MID		0x1A
+#define STMPE1801_REG_GPIO_SET_DIR_HIGH		0x1B
+#define STMPE1801_REG_GPIO_RE_LOW		0x1C
+#define STMPE1801_REG_GPIO_RE_MID		0x1D
+#define STMPE1801_REG_GPIO_RE_HIGH		0x1E
+#define STMPE1801_REG_GPIO_FE_LOW		0x1F
+#define STMPE1801_REG_GPIO_FE_MID		0x20
+#define STMPE1801_REG_GPIO_FE_HIGH		0x21
+#define STMPE1801_REG_GPIO_PULL_UP_LOW		0x22
+#define STMPE1801_REG_GPIO_PULL_UP_MID		0x23
+#define STMPE1801_REG_GPIO_PULL_UP_HIGH		0x24
+
+#define STMPE1801_MSK_SYS_CTRL_RESET		(1 << 7)
+
+#define STMPE1801_MSK_INT_EN_KPC		(1 << 1)
+#define STMPE1801_MSK_INT_EN_GPIO		(1 << 3)
+
 /*
  * STMPE24xx
  */
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 383ac1512a39d82542207a753ec13d2faf5d1e53..48395a69a7e96464c8bd44ae6fdaaf3066c22ffa 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -26,6 +26,7 @@ enum stmpe_partnum {
 	STMPE801,
 	STMPE811,
 	STMPE1601,
+	STMPE1801,
 	STMPE2401,
 	STMPE2403,
 	STMPE_NBR_PARTS
@@ -39,6 +40,7 @@ enum {
 	STMPE_IDX_CHIP_ID,
 	STMPE_IDX_ICR_LSB,
 	STMPE_IDX_IER_LSB,
+	STMPE_IDX_ISR_LSB,
 	STMPE_IDX_ISR_MSB,
 	STMPE_IDX_GPMR_LSB,
 	STMPE_IDX_GPSR_LSB,
@@ -49,6 +51,7 @@ enum {
 	STMPE_IDX_GPFER_LSB,
 	STMPE_IDX_GPAFR_U_MSB,
 	STMPE_IDX_IEGPIOR_LSB,
+	STMPE_IDX_ISGPIOR_LSB,
 	STMPE_IDX_ISGPIOR_MSB,
 	STMPE_IDX_MAX,
 };