scsi: pm8001: Fix NCQ NON DATA command completion handling

NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a
register-device-to-host-FIS response is expected for it.

However, for an IO_SUCCESS case, mpi_sata_completion() expects a
set-device-bits-FIS for any ata task with an use_ncq field true, which
includes NCQ NON DATA commands.

Fix this to correctly treat NCQ NON DATA commands as non-data by also
testing for the DMA_NONE DMA direction.

Link: https://lore.kernel.org/r/20220220031810.738362-16-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe6 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: NJack Wang <jinpu.wang@ionos.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/pm8001/pm8001_hwi.c

@@ -2415,7 +2415,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 				len = sizeof(struct pio_setup_fis);
 				pm8001_dbg(pm8001_ha, IO,
 					   "PIO read len = %d\n", len);
-			} else if (t->ata_task.use_ncq) {
+			} else if (t->ata_task.use_ncq &&
+				   t->data_dir != DMA_NONE) {
 				len = sizeof(struct set_dev_bits_fis);
 				pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
 					   len);

drivers/scsi/pm8001/pm80xx_hwi.c

@@ -2507,7 +2507,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
 				len = sizeof(struct pio_setup_fis);
 				pm8001_dbg(pm8001_ha, IO,
 					   "PIO read len = %d\n", len);
-			} else if (t->ata_task.use_ncq) {
+			} else if (t->ata_task.use_ncq &&
+				   t->data_dir != DMA_NONE) {
 				len = sizeof(struct set_dev_bits_fis);
 				pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
 					   len);