mfd: provide and use setup hook for tc6393xb

Instead of using bitfields for initial gpio setup,
provide generic setup/teardown hooks that can be used
to set the gpio states, register child devices, etc.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

arch/arm/mach-pxa/include/mach/tosa.h

@@ -59,8 +59,6 @@
  * TC6393XB GPIOs
  */
 #define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
-#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
-#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
 
 #define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
 #define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)

arch/arm/mach-pxa/tosa.c

@@ -706,16 +706,39 @@ static struct tmio_nand_data tosa_tc6393xb_nand_config = {
 	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
 };
 
-static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+static int tosa_tc6393xb_setup(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
+	if (rc)
+		goto err_req;
+
+	rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
+	if (rc)
+		goto err_dir;
+
+	return rc;
+
+err_dir:
+	gpio_free(TOSA_GPIO_CARD_VCC_ON);
+err_req:
+	return rc;
+}
+
+static void tosa_tc6393xb_teardown(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_CARD_VCC_ON);
+}
+
+static struct tc6393xb_platform_data tosa_tc6393xb_data = {
 	.scr_pll2cr	= 0x0cc1,
 	.scr_gper	= 0x3300,
-	.scr_gpo_dsr	=
-		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
-	.scr_gpo_doecr	=
-		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
 
 	.irq_base	= IRQ_BOARD_START,
 	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+	.setup		= tosa_tc6393xb_setup,
+	.teardown	= tosa_tc6393xb_teardown,
 
 	.enable		= tosa_tc6393xb_enable,
 	.disable	= tosa_tc6393xb_disable,
@@ -730,7 +753,7 @@ static struct platform_device tc6393xb_device = {
 	.name	= "tc6393xb",
 	.id	= -1,
 	.dev	= {
-		.platform_data	= &tosa_tc6393xb_setup,
+		.platform_data	= &tosa_tc6393xb_data,
 	},
 	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
 	.resource	= tc6393xb_resources,

drivers/mfd/tc6393xb.c

@@ -460,13 +460,6 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 
 	tc6393xb->suspend_state.fer = 0;
 
-	for (i = 0; i < 3; i++) {
-		tc6393xb->suspend_state.gpo_dsr[i] =
-			(tcpd->scr_gpo_dsr >> (8 * i)) & 0xff;
-		tc6393xb->suspend_state.gpo_doecr[i] =
-			(tcpd->scr_gpo_doecr >> (8 * i)) & 0xff;
-	}
-
 	tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 |
 					SCR_CCR_HCLK_48;
 
@@ -488,6 +481,12 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 
 	tc6393xb_attach_irq(dev);
 
+	if (tcpd->setup) {
+		ret = tcpd->setup(dev);
+		if (ret)
+			goto err_setup;
+	}
+
 	tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data;
 	tc6393xb_cells[TC6393XB_CELL_NAND].platform_data =
 		&tc6393xb_cells[TC6393XB_CELL_NAND];
@@ -506,6 +505,10 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 	if (!ret)
 		return 0;
 
+	if (tcpd->teardown)
+		tcpd->teardown(dev);
+
+err_setup:
 	tc6393xb_detach_irq(dev);
 
 err_gpio_add:
@@ -535,6 +538,10 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
 	int ret;
 
 	mfd_remove_devices(&dev->dev);
+
+	if (tcpd->teardown)
+		tcpd->teardown(dev);
+
 	tc6393xb_detach_irq(dev);
 
 	if (tc6393xb->gpio.base != -1) {

include/linux/mfd/tc6393xb.h

@@ -21,8 +21,6 @@
 struct tc6393xb_platform_data {
 	u16	scr_pll2cr;	/* PLL2 Control */
 	u16	scr_gper;	/* GP Enable */
-	u32	scr_gpo_doecr;	/* GPO Data OE Control */
-	u32	scr_gpo_dsr;	/* GPO Data Set */
 
 	int	(*enable)(struct platform_device *dev);
 	int	(*disable)(struct platform_device *dev);
@@ -31,6 +29,8 @@ struct tc6393xb_platform_data {
 
 	int	irq_base;	/* base for subdevice irqs */
 	int	gpio_base;
+	int	(*setup)(struct platform_device *dev);
+	void	(*teardown)(struct platform_device *dev);
 
 	struct tmio_nand_data	*nand_data;
 };