pch_gbe: Move the OKI Semiconductor driver

Move the OKI Semiconductor driver into driver/net/ethernet/oki-semi/
and make the necessary Kconfig and Makefile changes.

Note: there is no documented maintainer for this driver, so I CC'd
the last 2 major contributors.

CC: Tomoya <tomoya-linux@dsn.okisemi.com>
CC: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/Kconfig

@@ -996,25 +996,6 @@ config S6GMAC
 	  To compile this driver as a module, choose M here. The module
 	  will be called s6gmac.
 
-config PCH_GBE
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
-	depends on PCI
-	select MII
-	---help---
-	  This is a gigabit ethernet driver for EG20T PCH.
-	  EG20T PCH is the platform controller hub that is used in Intel's
-	  general embedded platform.
-	  EG20T PCH has Gigabit Ethernet interface.
-	  Using this interface, it is able to access system devices connected
-	  to Gigabit Ethernet.
-	  This driver enables Gigabit Ethernet function.
-
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7223.
-	  ML7223 IOH is for MP(Media Phone) use.
-	  ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7223 is completely compatible for Intel EG20T PCH.
-
 endif # NETDEV_1000
 
 #

drivers/net/Makefile

@@ -156,5 +156,4 @@ obj-$(CONFIG_WIMAX) += wimax/
 obj-$(CONFIG_CAIF) += caif/
 
 obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
-obj-$(CONFIG_PCH_GBE) += pch_gbe/
 obj-$(CONFIG_TILE_NET) += tile/

drivers/net/ethernet/Kconfig

@@ -32,6 +32,7 @@ source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
 source "drivers/net/ethernet/natsemi/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
+source "drivers/net/ethernet/oki-semi/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"

drivers/net/ethernet/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
+obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/

drivers/net/ethernet/oki-semi/Kconfig

+#
+# OKI Semiconductor device configuration
+#
+
+config NET_VENDOR_OKI
+	bool "OKI Semiconductor devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about OKI Semiconductor cards. If you say Y, you will
+	  be asked for your specific card in the following questions.
+
+if NET_VENDOR_OKI
+
+source "drivers/net/ethernet/oki-semi/pch_gbe/Kconfig"
+
+endif # NET_VENDOR_OKI

drivers/net/ethernet/oki-semi/Makefile

+#
+# Makefile for the OKI Semiconductor device drivers.
+#
+
+obj-$(CONFIG_PCH_GBE) += pch_gbe/

drivers/net/ethernet/oki-semi/pch_gbe/Kconfig

+#
+# OKI Semiconductor device configuration
+#
+
+config PCH_GBE
+	tristate "OKI SEMICONDUCTOR ML7223 IOH GbE (Intel EG20T PCH)"
+	depends on PCI
+	select MII
+	---help---
+	  This is a gigabit ethernet driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
+	  general embedded platform.  EG20T PCH has Gigabit Ethernet interface.
+	  Using this interface, it is able to access system devices connected
+	  to Gigabit Ethernet.  This driver enables Gigabit Ethernet function.
+
+	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+	  Output Hub), ML7223.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7223 is companion chip for Intel Atom E6xx series.
+	  ML7223 is completely compatible for Intel EG20T PCH.