diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt index 380914e965e084c7f6f61e1444eac87bcef3dc81..700dec4774fa912b5958a2bd82c0b0c55569ae2c 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt @@ -67,3 +67,20 @@ Example: gpio-controller; }; }; + +* Freescale on-board FPGA connected on I2C bus + +Some Freescale boards like BSC9132QDS have on board FPGA connected on +the i2c bus. + +Required properties: +- compatible: Should be a board-specific string followed by a string + indicating the type of FPGA. Example: + "fsl,-fpga", "fsl,fpga-qixis-i2c" +- reg: Should contain the address of the FPGA + +Example: + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts new file mode 100644 index 0000000000000000000000000000000000000000..6cab1062bc74a4032c54bdd63bdcd5a73f6c83df --- /dev/null +++ b/arch/powerpc/boot/dts/bsc9132qds.dts @@ -0,0 +1,35 @@ +/* + * BSC9132 QDS Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/bsc9132si-pre.dtsi" + +/ { + model = "fsl,bsc9132qds"; + compatible = "fsl,bsc9132qds"; + + memory { + device_type = "memory"; + }; + + ifc: ifc@ff71e000 { + /* NOR, NAND Flash on board */ + ranges = <0x0 0x0 0x0 0x88000000 0x08000000 + 0x1 0x0 0x0 0xff800000 0x00010000>; + reg = <0x0 0xff71e000 0x0 0x2000>; + }; + + soc: soc@ff700000 { + ranges = <0x0 0x0 0xff700000 0x100000>; + }; +}; + +/include/ "bsc9132qds.dtsi" +/include/ "fsl/bsc9132si-post.dtsi" diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..af8e88830221cdab102b534acc502e7979f9a39b --- /dev/null +++ b/arch/powerpc/boot/dts/bsc9132qds.dtsi @@ -0,0 +1,101 @@ +/* + * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x4000>; + }; +}; + +&soc { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <30000000>; + }; + }; + + i2c@3000 { + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x1f>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..c72307198140564034a6348a170fad62878c95d4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi @@ -0,0 +1,185 @@ +/* + * BSC9132 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + /* FIXME: Test whether interrupts are split */ + interrupts = <16 2 0 0 20 2 0 0>; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,bsc9132-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,bsc9132-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,bsc9132-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 1 8>; + }; + +/include/ "pq3-i2c-0.dtsi" + i2c@3000 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-i2c-1.dtsi" + i2c@3100 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-duart-0.dtsi" + serial0: serial@4500 { + interrupts = <18 2 0 0>; + }; + + serial1: serial@4600 { + interrupts = <18 2 0 0 >; + }; +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + interrupts = <22 0x2 0 0>; + }; + +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + interrupts = <19 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,bsc9132-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 1 0>; + }; + +/include/ "pq3-dma-0.dtsi" + +dma@21300 { + + dma-channel@0 { + interrupts = <62 2 0 0>; + }; + + dma-channel@80 { + interrupts = <63 2 0 0>; + }; + + dma-channel@100 { + interrupts = <64 2 0 0>; + }; + + dma-channel@180 { + interrupts = <65 2 0 0>; + }; +}; + +/include/ "pq3-usb2-dr-0.dtsi" +usb@22000 { + compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2"; + interrupts = <40 0x2 0 0>; +}; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + fsl,sdhci-auto-cmd12; + interrupts = <41 0x2 0 0>; + }; + +/include/ "pq3-sec4.4-0.dtsi" +crypto@30000 { + interrupts = <57 2 0 0>; + + sec_jr0: jr@1000 { + interrupts = <58 2 0 0>; + }; + + sec_jr1: jr@2000 { + interrupts = <59 2 0 0>; + }; + + sec_jr2: jr@3000 { + interrupts = <60 2 0 0>; + }; + + sec_jr3: jr@4000 { + interrupts = <61 2 0 0>; + }; +}; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" +enet0: ethernet@b0000 { + queue-group@b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>; + }; +}; + +/include/ "pq3-etsec2-1.dtsi" +enet1: ethernet@b1000 { + queue-group@b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>; + }; +}; + +global-utilities@e0000 { + compatible = "fsl,bsc9132-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..301a9dba579067370b9d4217860cf1dbc1d0e4c9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi @@ -0,0 +1,66 @@ +/* + * BSC9132 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + ethernet0 = &enet0; + ethernet1 = &enet1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500v2@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + cpu1: PowerPC,e500v2@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index a3cd2afee511c579324eaba23db12ae19b8224a1..f442120e0033d0767473356909a92e8dfe8df0a5 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -38,6 +38,15 @@ config C293_PCIE help This option enables support for the C293PCIE board +config BSC9132_QDS + bool "Freescale BSC9132QDS" + select DEFAULT_UIMAGE + help + This option enables support for the Freescale BSC9132 QDS board. + BSC9132 is a heterogeneous SoC containing dual e500v2 powerpc cores + and dual StarCore SC3850 DSP cores. + Manufacturer : Freescale Semiconductor, Inc + config MPC8540_ADS bool "Freescale MPC8540 ADS" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 822103e8d34f3dd78d6da6db94a677d00008408e..7303260466255605ec7bc6f4e1ebcad9ba8f29ec 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o obj-y += common.o obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o +obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o obj-$(CONFIG_C293_PCIE) += c293pcie.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c new file mode 100644 index 0000000000000000000000000000000000000000..f0927e58af2579aa9adf082cf7912b23933887f4 --- /dev/null +++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c @@ -0,0 +1,74 @@ +/* + * BSC913xQDS Board Setup + * + * Author: + * Harninder Rai + * Priyanka Jain + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include "mpc85xx.h" +#include "smp.h" + +void __init bsc913x_qds_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + if (!mpic) + pr_err("bsc913x: Failed to allocate MPIC structure\n"); + else + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init bsc913x_qds_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("bsc913x_qds_setup_arch()", 0); + +#if defined(CONFIG_SMP) + mpc85xx_smp_init(); +#endif + + pr_info("bsc913x board from Freescale Semiconductor\n"); +} + +machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ + +static int __init bsc9132_qds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,bsc9132qds"); +} + +define_machine(bsc9132_qds) { + .name = "BSC9132 QDS", + .probe = bsc9132_qds_probe, + .setup_arch = bsc913x_qds_setup_arch, + .init_IRQ = bsc913x_qds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +};