提交 1b6e2ceb 编写于 作者: D Dmitry Kravkov 提交者: David S. Miller

bnx2x: allow device properly initialize after hotplug

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 5e374b5a
......@@ -7288,51 +7288,35 @@ static inline void bnx2x_mcp_wait_one(struct bnx2x *bp)
msleep(MCP_ONE_TIMEOUT);
}
static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val)
/*
* initializes bp->common.shmem_base and waits for validity signature to appear
*/
static int bnx2x_init_shmem(struct bnx2x *bp)
{
u32 shmem, cnt, validity_offset, val;
int rc = 0;
msleep(100);
int cnt = 0;
u32 val = 0;
/* Get shmem offset */
shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
if (shmem == 0) {
BNX2X_ERR("Shmem 0 return failure\n");
rc = -ENOTTY;
goto exit_lbl;
do {
bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
if (bp->common.shmem_base) {
val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
if (val & SHR_MEM_VALIDITY_MB)
return 0;
}
validity_offset = offsetof(struct shmem_region, validity_map[0]);
bnx2x_mcp_wait_one(bp);
/* Wait for MCP to come up */
for (cnt = 0; cnt < (MCP_TIMEOUT / MCP_ONE_TIMEOUT); cnt++) {
/* TBD: its best to check validity map of last port.
* currently checks on port 0.
*/
val = REG_RD(bp, shmem + validity_offset);
DP(NETIF_MSG_HW, "shmem 0x%x validity map(0x%x)=0x%x\n", shmem,
shmem + validity_offset, val);
} while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
/* check that shared memory is valid. */
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
== (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
break;
bnx2x_mcp_wait_one(bp);
}
BNX2X_ERR("BAD MCP validity signature\n");
DP(NETIF_MSG_HW, "Cnt=%d Shmem validity map 0x%x\n", cnt, val);
return -ENODEV;
}
/* Check that shared memory is valid. This indicates that MCP is up. */
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
(SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
BNX2X_ERR("Shmem signature not present. MCP is not up !!\n");
rc = -ENOTTY;
goto exit_lbl;
}
static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val)
{
int rc = bnx2x_init_shmem(bp);
exit_lbl:
/* Restore the `magic' bit value */
if (!CHIP_IS_E1(bp))
bnx2x_clp_reset_done(bp, magic_val);
......@@ -7845,10 +7829,12 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
bp->common.flash_size, bp->common.flash_size);
bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
bnx2x_init_shmem(bp);
bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ?
MISC_REG_GENERIC_CR_1 :
MISC_REG_GENERIC_CR_0));
bp->link_params.shmem_base = bp->common.shmem_base;
bp->link_params.shmem2_base = bp->common.shmem2_base;
BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
......@@ -7860,11 +7846,6 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
return;
}
val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]);
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
!= (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
BNX2X_ERR("BAD MCP validity signature\n");
bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册