提交 1b627d17 编写于 作者: L Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (170 commits)
  commit 3d9dd756
  Author: Zach Brown <zach.brown@oracle.com>
  Date:   Fri Apr 14 16:04:18 2006 -0700
  
      [PATCH] ip_output: account for fraggap when checking to add trailer_len
      
      During other work I noticed that ip_append_data() seemed to be forgetting to
      include the frag gap in its calculation of a fragment that consumes the rest of
      the payload.  Herbert confirmed that this was a bug that snuck in during a
      previous rework.
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
  
  commit 08d09997
  Author: Linus Walleij <triad@df.lth.se>
  Date:   Fri Apr 14 16:03:33 2006 -0700
  
      [IRDA]: smsc-ircc2, smcinit support for ALi ISA bridges
      
  ...
The sync patches work is based on initial patches from
Krisztian <hidden@balabit.hu> and others and additional patches
from Jamal <hadi@cyberus.ca>.
The end goal for syncing is to be able to insert attributes + generate
events so that the an SA can be safely moved from one machine to another
for HA purposes.
The idea is to synchronize the SA so that the takeover machine can do
the processing of the SA as accurate as possible if it has access to it.
We already have the ability to generate SA add/del/upd events.
These patches add ability to sync and have accurate lifetime byte (to
ensure proper decay of SAs) and replay counters to avoid replay attacks
with as minimal loss at failover time.
This way a backup stays as closely uptodate as an active member.
Because the above items change for every packet the SA receives,
it is possible for a lot of the events to be generated.
For this reason, we also add a nagle-like algorithm to restrict
the events. i.e we are going to set thresholds to say "let me
know if the replay sequence threshold is reached or 10 secs have passed"
These thresholds are set system-wide via sysctls or can be updated
per SA.
The identified items that need to be synchronized are:
- the lifetime byte counter
note that: lifetime time limit is not important if you assume the failover
machine is known ahead of time since the decay of the time countdown
is not driven by packet arrival.
- the replay sequence for both inbound and outbound
1) Message Structure
----------------------
nlmsghdr:aevent_id:optional-TLVs.
The netlink message types are:
XFRM_MSG_NEWAE and XFRM_MSG_GETAE.
A XFRM_MSG_GETAE does not have TLVs.
A XFRM_MSG_NEWAE will have at least two TLVs (as is
discussed further below).
aevent_id structure looks like:
struct xfrm_aevent_id {
struct xfrm_usersa_id sa_id;
__u32 flags;
};
xfrm_usersa_id in this message layout identifies the SA.
flags are used to indicate different things. The possible
flags are:
XFRM_AE_RTHR=1, /* replay threshold*/
XFRM_AE_RVAL=2, /* replay value */
XFRM_AE_LVAL=4, /* lifetime value */
XFRM_AE_ETHR=8, /* expiry timer threshold */
XFRM_AE_CR=16, /* Event cause is replay update */
XFRM_AE_CE=32, /* Event cause is timer expiry */
XFRM_AE_CU=64, /* Event cause is policy update */
How these flags are used is dependent on the direction of the
message (kernel<->user) as well the cause (config, query or event).
This is described below in the different messages.
The pid will be set appropriately in netlink to recognize direction
(0 to the kernel and pid = processid that created the event
when going from kernel to user space)
A program needs to subscribe to multicast group XFRMNLGRP_AEVENTS
to get notified of these events.
2) TLVS reflect the different parameters:
-----------------------------------------
a) byte value (XFRMA_LTIME_VAL)
This TLV carries the running/current counter for byte lifetime since
last event.
b)replay value (XFRMA_REPLAY_VAL)
This TLV carries the running/current counter for replay sequence since
last event.
c)replay threshold (XFRMA_REPLAY_THRESH)
This TLV carries the threshold being used by the kernel to trigger events
when the replay sequence is exceeded.
d) expiry timer (XFRMA_ETIMER_THRESH)
This is a timer value in milliseconds which is used as the nagle
value to rate limit the events.
3) Default configurations for the parameters:
----------------------------------------------
By default these events should be turned off unless there is
at least one listener registered to listen to the multicast
group XFRMNLGRP_AEVENTS.
Programs installing SAs will need to specify the two thresholds, however,
in order to not change existing applications such as racoon
we also provide default threshold values for these different parameters
in case they are not specified.
the two sysctls/proc entries are:
a) /proc/sys/net/core/sysctl_xfrm_aevent_etime
used to provide default values for the XFRMA_ETIMER_THRESH in incremental
units of time of 100ms. The default is 10 (1 second)
b) /proc/sys/net/core/sysctl_xfrm_aevent_rseqth
used to provide default values for XFRMA_REPLAY_THRESH parameter
in incremental packet count. The default is two packets.
4) Message types
----------------
a) XFRM_MSG_GETAE issued by user-->kernel.
XFRM_MSG_GETAE does not carry any TLVs.
The response is a XFRM_MSG_NEWAE which is formatted based on what
XFRM_MSG_GETAE queried for.
The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
*if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved
*if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved
b) XFRM_MSG_NEWAE is issued by either user space to configure
or kernel to announce events or respond to a XFRM_MSG_GETAE.
i) user --> kernel to configure a specific SA.
any of the values or threshold parameters can be updated by passing the
appropriate TLV.
A response is issued back to the sender in user space to indicate success
or failure.
In the case of success, additionally an event with
XFRM_MSG_NEWAE is also issued to any listeners as described in iii).
ii) kernel->user direction as a response to XFRM_MSG_GETAE
The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
The threshold TLVs will be included if explicitly requested in
the XFRM_MSG_GETAE message.
iii) kernel->user to report as event if someone sets any values or
thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above).
In such a case XFRM_AE_CU flag is set to inform the user that
the change happened as a result of an update.
The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
iv) kernel->user to report event when replay threshold or a timeout
is exceeded.
In such a case either XFRM_AE_CR (replay exceeded) or XFRM_AE_CE (timeout
happened) is set to inform the user what happened.
Note the two flags are mutually exclusive.
The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
Exceptions to threshold settings
--------------------------------
If you have an SA that is getting hit by traffic in bursts such that
there is a period where the timer threshold expires with no packets
seen, then an odd behavior is seen as follows:
The first packet arrival after a timer expiry will trigger a timeout
aevent; i.e we dont wait for a timeout period or a packet threshold
to be reached. This is done for simplicity and efficiency reasons.
-JHS
......@@ -1815,14 +1815,14 @@ static int irda_usb_probe(struct usb_interface *intf,
self->needspatch = (ret < 0);
if (ret < 0) {
printk("patch_device failed\n");
goto err_out_4;
goto err_out_5;
}
/* replace IrDA class descriptor with what patched device is now reporting */
irda_desc = irda_usb_find_class_desc (self->usbintf);
if (irda_desc == NULL) {
ret = -ENODEV;
goto err_out_4;
goto err_out_5;
}
if (self->irda_desc)
kfree (self->irda_desc);
......@@ -1832,6 +1832,8 @@ static int irda_usb_probe(struct usb_interface *intf,
return 0;
err_out_5:
unregister_netdev(self->netdev);
err_out_4:
kfree(self->speed_buff);
err_out_3:
......
......@@ -225,6 +225,8 @@ static int __init smsc_superio_lpc(unsigned short cfg_base);
#ifdef CONFIG_PCI
static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
static void __init preconfigure_ali_port(struct pci_dev *dev,
unsigned short port);
static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
unsigned short ircc_fir,
......@@ -2327,9 +2329,14 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
* pre-configuration not properly done by the BIOS (especially laptops)
* This code is based in part on smcinit.c, tosh1800-smcinit.c
* and tosh2450-smcinit.c. The table lists the device entries
* for ISA bridges with an LPC (Local Peripheral Configurator)
* that are in turn used to configure the SMSC device with default
* SIR and FIR I/O ports, DMA and IRQ.
* for ISA bridges with an LPC (Low Pin Count) controller which
* handles the communication with the SMSC device. After the LPC
* controller is initialized through PCI, the SMSC device is initialized
* through a dedicated port in the ISA port-mapped I/O area, this latter
* area is used to configure the SMSC device with default
* SIR and FIR I/O ports, DMA and IRQ. Different vendors have
* used different sets of parameters and different control port
* addresses making a subsystem device table necessary.
*/
#ifdef CONFIG_PCI
#define PCIID_VENDOR_INTEL 0x8086
......@@ -2340,9 +2347,10 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev
.device = 0x24cc,
.subvendor = 0x103c,
.subdevice = 0x088c,
.sir_io = 0x02f8, /* Quite certain these are the same for nc8000 as for nc6000 */
/* Quite certain these are the same for nc8000 as for nc6000 */
.sir_io = 0x02f8,
.fir_io = 0x0130,
.fir_irq = 0x09,
.fir_irq = 0x05,
.fir_dma = 0x03,
.cfg_base = 0x004e,
.preconfigure = preconfigure_through_82801,
......@@ -2355,60 +2363,79 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev
.subdevice = 0x0890,
.sir_io = 0x02f8,
.fir_io = 0x0130,
.fir_irq = 0x09,
.fir_irq = 0x05,
.fir_dma = 0x03,
.cfg_base = 0x004e,
.preconfigure = preconfigure_through_82801,
.name = "HP nc6000",
},
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
/* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
.vendor = PCIID_VENDOR_INTEL,
.device = 0x24c0,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
.subdevice = 0xffff, /* 0xffff is "any" */
.sir_io = 0x03f8,
.fir_io = 0x0130,
.fir_irq = 0x07,
.fir_dma = 0x01,
.cfg_base = 0x002e,
.preconfigure = preconfigure_through_82801,
.name = "Toshiba Satellite 2450",
.name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
},
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
.device = 0x248c, /* Some use 24cc? */
.device = 0x248c,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */
.sir_io = 0x03f8,
.fir_io = 0x0130,
.fir_irq = 0x03,
.fir_dma = 0x03,
.cfg_base = 0x002e,
.preconfigure = preconfigure_through_82801,
.name = "Toshiba laptop with Intel 82801CAM ISA bridge",
},
{
/* 82801DBM (ICH4-M) LPC Interface Bridge */
.vendor = PCIID_VENDOR_INTEL,
.device = 0x24cc,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
.subdevice = 0xffff, /* 0xffff is "any" */
.sir_io = 0x03f8,
.fir_io = 0x0130,
.fir_irq = 0x03,
.fir_dma = 0x03,
.cfg_base = 0x002e,
.preconfigure = preconfigure_through_82801,
.name = "Toshiba Satellite 5100/5200, Tecra 9100",
.name = "Toshiba laptop with Intel 8281DBM LPC bridge",
},
{
.vendor = PCIID_VENDOR_ALI, /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
/* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
.vendor = PCIID_VENDOR_ALI,
.device = 0x1533,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
.subdevice = 0xffff, /* 0xffff is "any" */
.sir_io = 0x02e8,
.fir_io = 0x02f8,
.fir_irq = 0x07,
.fir_dma = 0x03,
.cfg_base = 0x002e,
.preconfigure = preconfigure_through_ali,
.name = "Toshiba Satellite 1800",
.name = "Toshiba laptop with ALi ISA bridge",
},
{ } // Terminator
};
/*
* This sets up the basic SMSC parameters (FIR port, SIR port, FIR DMA, FIR IRQ)
* This sets up the basic SMSC parameters
* (FIR port, SIR port, FIR DMA, FIR IRQ)
* through the chip configuration port.
*/
static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf)
static int __init preconfigure_smsc_chip(struct
smsc_ircc_subsystem_configuration
*conf)
{
unsigned short iobase = conf->cfg_base;
unsigned char tmpbyte;
......@@ -2416,7 +2443,9 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
tmpbyte = inb(iobase +1); // Read device ID
IRDA_DEBUG(0, "Detected Chip id: 0x%02x, setting up registers...\n",tmpbyte);
IRDA_DEBUG(0,
"Detected Chip id: 0x%02x, setting up registers...\n",
tmpbyte);
/* Disable UART1 and set up SIR I/O port */
outb(0x24, iobase); // select CR24 - UART1 base addr
......@@ -2426,6 +2455,7 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
tmpbyte = inb(iobase + 1);
if (tmpbyte != (conf->sir_io >> 2) ) {
IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
IRDA_WARNING("Try to supply ircc_cfg argument.\n");
return -ENXIO;
}
......@@ -2461,7 +2491,8 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase); // CR0C - UART mode
tmpbyte = inb(iobase + 1);
tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK | SMSCSIOFLAT_UART2MODE_VAL_IRDA;
tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
SMSCSIOFLAT_UART2MODE_VAL_IRDA;
outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
outb(LPC47N227_APMBOOTDRIVE_REG, iobase); // CR07 - Auto Pwr Mgt/boot drive sel
......@@ -2486,53 +2517,226 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
return 0;
}
/* 82801CAM registers */
/* 82801CAM generic registers */
#define VID 0x00
#define DID 0x02
#define PIRQA_ROUT 0x60
#define PIRQ_A_D_ROUT 0x60
#define SIRQ_CNTL 0x64
#define PIRQ_E_H_ROUT 0x68
#define PCI_DMA_C 0x90
/* LPC-specific registers */
#define COM_DEC 0xe0
#define GEN1_DEC 0xe4
#define LPC_EN 0xe6
#define GEN2_DEC 0xec
/*
* Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge or
* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. They all work the same way!
* Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
* or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
* They all work the same way!
*/
static int __init preconfigure_through_82801(struct pci_dev *dev,
struct smsc_ircc_subsystem_configuration *conf)
struct
smsc_ircc_subsystem_configuration
*conf)
{
unsigned short tmpword;
int ret;
unsigned char tmpbyte;
IRDA_MESSAGE("Setting up the SMSC device via the 82801 controller.\n");
pci_write_config_byte(dev, COM_DEC, 0x10);
IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n");
/*
* Select the range for the COMA COM port (SIR)
* Register COM_DEC:
* Bit 7: reserved
* Bit 6-4, COMB decode range
* Bit 3: reserved
* Bit 2-0, COMA decode range
*
* Decode ranges:
* 000 = 0x3f8-0x3ff (COM1)
* 001 = 0x2f8-0x2ff (COM2)
* 010 = 0x220-0x227
* 011 = 0x228-0x22f
* 100 = 0x238-0x23f
* 101 = 0x2e8-0x2ef (COM4)
* 110 = 0x338-0x33f
* 111 = 0x3e8-0x3ef (COM3)
*/
pci_read_config_byte(dev, COM_DEC, &tmpbyte);
tmpbyte &= 0xf8; /* mask COMA bits */
switch(conf->sir_io) {
case 0x3f8:
tmpbyte |= 0x00;
break;
case 0x2f8:
tmpbyte |= 0x01;
break;
case 0x220:
tmpbyte |= 0x02;
break;
case 0x228:
tmpbyte |= 0x03;
break;
case 0x238:
tmpbyte |= 0x04;
break;
case 0x2e8:
tmpbyte |= 0x05;
break;
case 0x338:
tmpbyte |= 0x06;
break;
case 0x3e8:
tmpbyte |= 0x07;
break;
default:
tmpbyte |= 0x01; /* COM2 default */
}
IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
pci_write_config_byte(dev, COM_DEC, tmpbyte);
/* Enable LPC */
pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */
tmpword &= 0xfffd; /* mask bit 1 */
tmpword |= 0x0001; /* set bit 0 : COMA addr range enable */
/* Enable Low Pin Count interface */
pci_read_config_word(dev, LPC_EN, &tmpword);
/* These seem to be set up at all times,
* just make sure it is properly set.
*/
switch(conf->cfg_base) {
case 0x04e:
tmpword |= 0x2000;
break;
case 0x02e:
tmpword |= 0x1000;
break;
case 0x062:
tmpword |= 0x0800;
break;
case 0x060:
tmpword |= 0x0400;
break;
default:
IRDA_WARNING("Uncommon I/O base address: 0x%04x\n",
conf->cfg_base);
break;
}
tmpword &= 0xfffd; /* disable LPC COMB */
tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
pci_write_config_word(dev, LPC_EN, tmpword);
/* Setup DMA */
pci_write_config_word(dev, PCI_DMA_C, 0xc0c0); /* LPC I/F DMA on, channel 3 -- rtm (?? PCI DMA ?) */
pci_write_config_word(dev, GEN2_DEC, 0x131); /* LPC I/F 2nd decode range */
/*
* Configure LPC DMA channel
* PCI_DMA_C bits:
* Bit 15-14: DMA channel 7 select
* Bit 13-12: DMA channel 6 select
* Bit 11-10: DMA channel 5 select
* Bit 9-8: Reserved
* Bit 7-6: DMA channel 3 select
* Bit 5-4: DMA channel 2 select
* Bit 3-2: DMA channel 1 select
* Bit 1-0: DMA channel 0 select
* 00 = Reserved value
* 01 = PC/PCI DMA
* 10 = Reserved value
* 11 = LPC I/F DMA
*/
pci_read_config_word(dev, PCI_DMA_C, &tmpword);
switch(conf->fir_dma) {
case 0x07:
tmpword |= 0xc000;
break;
case 0x06:
tmpword |= 0x3000;
break;
case 0x05:
tmpword |= 0x0c00;
break;
case 0x03:
tmpword |= 0x00c0;
break;
case 0x02:
tmpword |= 0x0030;
break;
case 0x01:
tmpword |= 0x000c;
break;
case 0x00:
tmpword |= 0x0003;
break;
default:
break; /* do not change settings */
}
IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
pci_write_config_word(dev, PCI_DMA_C, tmpword);
/*
* GEN2_DEC bits:
* Bit 15-4: Generic I/O range
* Bit 3-1: reserved (read as 0)
* Bit 0: enable GEN2 range on LPC I/F
*/
tmpword = conf->fir_io & 0xfff8;
tmpword |= 0x0001;
IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
pci_write_config_word(dev, GEN2_DEC, tmpword);
/* Pre-configure chip */
ret = preconfigure_smsc_chip(conf);
return preconfigure_smsc_chip(conf);
}
/* Disable LPC */
pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */
tmpword &= 0xfffc; /* mask bit 1 and bit 0, COMA addr range disable */
pci_write_config_word(dev, LPC_EN, tmpword);
return ret;
/*
* Pre-configure a certain port on the ALi 1533 bridge.
* This is based on reverse-engineering since ALi does not
* provide any data sheet for the 1533 chip.
*/
static void __init preconfigure_ali_port(struct pci_dev *dev,
unsigned short port)
{
unsigned char reg;
/* These bits obviously control the different ports */
unsigned char mask;
unsigned char tmpbyte;
switch(port) {
case 0x0130:
case 0x0178:
reg = 0xb0;
mask = 0x80;
break;
case 0x03f8:
reg = 0xb4;
mask = 0x80;
break;
case 0x02f8:
reg = 0xb4;
mask = 0x30;
break;
case 0x02e8:
reg = 0xb4;
mask = 0x08;
break;
default:
IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
return;
}
pci_read_config_byte(dev, reg, &tmpbyte);
/* Turn on the right bits */
tmpbyte |= mask;
pci_write_config_byte(dev, reg, tmpbyte);
IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
return;
}
static int __init preconfigure_through_ali(struct pci_dev *dev,
struct smsc_ircc_subsystem_configuration *conf)
struct
smsc_ircc_subsystem_configuration
*conf)
{
/* TODO: put in ALi 1533 configuration here. */
IRDA_MESSAGE("SORRY: %s has an unsupported bridge controller (ALi): not pre-configured.\n", conf->name);
return -ENODEV;
/* Configure the two ports on the ALi 1533 */
preconfigure_ali_port(dev, conf->sir_io);
preconfigure_ali_port(dev, conf->fir_io);
/* Pre-configure chip */
return preconfigure_smsc_chip(conf);
}
static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
......@@ -2552,9 +2756,10 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
struct smsc_ircc_subsystem_configuration *conf;
/*
* Cache the subsystem vendor/device: some manufacturers fail to set
* this for all components, so we save it in case there is just
* 0x0000 0x0000 on the device we want to check.
* Cache the subsystem vendor/device:
* some manufacturers fail to set this for all components,
* so we save it in case there is just 0x0000 0x0000 on the
* device we want to check.
*/
if (dev->subsystem_vendor != 0x0000U) {
ss_vendor = dev->subsystem_vendor;
......@@ -2564,13 +2769,20 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
for( ; conf->subvendor; conf++) {
if(conf->vendor == dev->vendor &&
conf->device == dev->device &&
conf->subvendor == ss_vendor && /* Sometimes these are cached values */
(conf->subdevice == ss_device || conf->subdevice == 0xffff)) {
struct smsc_ircc_subsystem_configuration tmpconf;
conf->subvendor == ss_vendor &&
/* Sometimes these are cached values */
(conf->subdevice == ss_device ||
conf->subdevice == 0xffff)) {
struct smsc_ircc_subsystem_configuration
tmpconf;
memcpy(&tmpconf, conf, sizeof(struct smsc_ircc_subsystem_configuration));
memcpy(&tmpconf, conf,
sizeof(struct smsc_ircc_subsystem_configuration));
/* Override the default values with anything passed in as parameter */
/*
* Override the default values with anything
* passed in as parameter
*/
if (ircc_cfg != 0)
tmpconf.cfg_base = ircc_cfg;
if (ircc_fir != 0)
......
......@@ -10,8 +10,6 @@
extern struct neigh_table arp_tbl;
extern void arp_init(void);
extern int arp_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev);
extern int arp_find(unsigned char *haddr, struct sk_buff *skb);
extern int arp_ioctl(unsigned int cmd, void __user *arg);
extern void arp_send(int type, int ptype, u32 dest_ip,
......
......@@ -143,6 +143,11 @@ struct xfrm_state
/* Replay detection state at the time we sent the last notification */
struct xfrm_replay_state preplay;
/* internal flag that only holds state for delayed aevent at the
* moment
*/
u32 xflags;
/* Replay detection notification settings */
u32 replay_maxage;
u32 replay_maxdiff;
......@@ -168,6 +173,9 @@ struct xfrm_state
void *data;
};
/* xflags - make enum if more show up */
#define XFRM_TIME_DEFER 1
enum {
XFRM_STATE_VOID,
XFRM_STATE_ACQ,
......
此差异已折叠。
......@@ -928,7 +928,8 @@ static void parp_redo(struct sk_buff *skb)
* Receive an arp request from the device layer.
*/
int arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct arphdr *arp;
......@@ -1417,7 +1418,6 @@ static int __init arp_proc_init(void)
EXPORT_SYMBOL(arp_broken_ops);
EXPORT_SYMBOL(arp_find);
EXPORT_SYMBOL(arp_rcv);
EXPORT_SYMBOL(arp_create);
EXPORT_SYMBOL(arp_xmit);
EXPORT_SYMBOL(arp_send);
......
......@@ -1556,7 +1556,6 @@ void __init devinet_init(void)
#endif
}
EXPORT_SYMBOL(devinet_ioctl);
EXPORT_SYMBOL(in_dev_finish_destroy);
EXPORT_SYMBOL(inet_select_addr);
EXPORT_SYMBOL(inetdev_by_index);
......
......@@ -666,4 +666,3 @@ void __init ip_fib_init(void)
}
EXPORT_SYMBOL(inet_addr_type);
EXPORT_SYMBOL(ip_rt_ioctl);
......@@ -43,8 +43,6 @@ struct inet_bind_bucket *inet_bind_bucket_create(kmem_cache_t *cachep,
return tb;
}
EXPORT_SYMBOL(inet_bind_bucket_create);
/*
* Caller must hold hashbucket lock for this tb with local BH disabled
*/
......@@ -64,8 +62,6 @@ void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
inet_csk(sk)->icsk_bind_hash = tb;
}
EXPORT_SYMBOL(inet_bind_hash);
/*
* Get rid of any references to a local port held by the given sock.
*/
......
......@@ -904,7 +904,7 @@ int ip_append_data(struct sock *sk,
* because we have no idea what fragment will be
* the last.
*/
if (datalen == length)
if (datalen == length + fraggap)
alloclen += rt->u.dst.trailer_len;
if (transhdrlen) {
......
......@@ -4559,7 +4559,6 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb,
EXPORT_SYMBOL(sysctl_tcp_ecn);
EXPORT_SYMBOL(sysctl_tcp_reordering);
EXPORT_SYMBOL(sysctl_tcp_abc);
EXPORT_SYMBOL(tcp_parse_options);
EXPORT_SYMBOL(tcp_rcv_established);
EXPORT_SYMBOL(tcp_rcv_state_process);
......
......@@ -1859,5 +1859,4 @@ EXPORT_SYMBOL(tcp_proc_unregister);
#endif
EXPORT_SYMBOL(sysctl_local_port_range);
EXPORT_SYMBOL(sysctl_tcp_low_latency);
EXPORT_SYMBOL(sysctl_tcp_tw_reuse);
......@@ -59,9 +59,6 @@ int sysctl_tcp_tso_win_divisor = 3;
int sysctl_tcp_mtu_probing = 0;
int sysctl_tcp_base_mss = 512;
EXPORT_SYMBOL(sysctl_tcp_mtu_probing);
EXPORT_SYMBOL(sysctl_tcp_base_mss);
static void update_send_head(struct sock *sk, struct tcp_sock *tp,
struct sk_buff *skb)
{
......
......@@ -805,16 +805,22 @@ void xfrm_replay_notify(struct xfrm_state *x, int event)
case XFRM_REPLAY_UPDATE:
if (x->replay_maxdiff &&
(x->replay.seq - x->preplay.seq < x->replay_maxdiff) &&
(x->replay.oseq - x->preplay.oseq < x->replay_maxdiff))
(x->replay.oseq - x->preplay.oseq < x->replay_maxdiff)) {
if (x->xflags & XFRM_TIME_DEFER)
event = XFRM_REPLAY_TIMEOUT;
else
return;
}
break;
case XFRM_REPLAY_TIMEOUT:
if ((x->replay.seq == x->preplay.seq) &&
(x->replay.bitmap == x->preplay.bitmap) &&
(x->replay.oseq == x->preplay.oseq))
(x->replay.oseq == x->preplay.oseq)) {
x->xflags |= XFRM_TIME_DEFER;
return;
}
break;
}
......@@ -825,8 +831,10 @@ void xfrm_replay_notify(struct xfrm_state *x, int event)
km_state_notify(x, &c);
if (x->replay_maxage &&
!mod_timer(&x->rtimer, jiffies + x->replay_maxage))
!mod_timer(&x->rtimer, jiffies + x->replay_maxage)) {
xfrm_state_hold(x);
x->xflags &= ~XFRM_TIME_DEFER;
}
}
EXPORT_SYMBOL(xfrm_replay_notify);
......@@ -836,10 +844,15 @@ static void xfrm_replay_timer_handler(unsigned long data)
spin_lock(&x->lock);
if (xfrm_aevent_is_on() && x->km.state == XFRM_STATE_VALID)
if (x->km.state == XFRM_STATE_VALID) {
if (xfrm_aevent_is_on())
xfrm_replay_notify(x, XFRM_REPLAY_TIMEOUT);
else
x->xflags |= XFRM_TIME_DEFER;
}
spin_unlock(&x->lock);
xfrm_state_put(x);
}
int xfrm_replay_check(struct xfrm_state *x, u32 seq)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册