diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c index 130f2225a6fc9ccead7cdd1160607c1460d98274..132de8e93bf898a8a30453adf7751e80942f14a8 100644 --- a/drivers/staging/iio/light/isl29018.c +++ b/drivers/staging/iio/light/isl29018.c @@ -564,7 +564,8 @@ static int isl29018_chip_init(struct isl29018_chip *chip) return status; } - /* Code added per Intersil Application Note 1534: + /* + * Code added per Intersil Application Note 1534: * When VDD sinks to approximately 1.8V or below, some of * the part's registers may change their state. When VDD * recovers to 2.25V (or greater), the part may thus be in an @@ -591,7 +592,8 @@ static int isl29018_chip_init(struct isl29018_chip *chip) return status; } - /* See Intersil AN1534 comments above. + /* + * See Intersil AN1534 comments above. * "Operating Mode" (COMMAND1) register is reprogrammed when * data is read from the device. */ @@ -773,7 +775,8 @@ static int isl29018_suspend(struct device *dev) mutex_lock(&chip->lock); - /* Since this driver uses only polling commands, we are by default in + /* + * Since this driver uses only polling commands, we are by default in * auto shutdown (ie, power-down) mode. * So we do not have much to do here. */