diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 5d9db5e7476cc5a92c3c2b45ee232391b3d1ee5d..da7ee8bec165a327565703512e6583742f08ca21 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -338,6 +338,7 @@ struct ahci_host_priv { u32 saved_cap; /* saved initial cap */ u32 saved_cap2; /* saved initial cap2 */ u32 saved_port_map; /* saved initial port_map */ + u32 saved_port_cap[AHCI_MAX_PORTS]; /* saved port_cap */ u32 em_loc; /* enclosure management location */ u32 em_buf_sz; /* EM buffer size in byte */ u32 em_msg_type; /* EM message type */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 1ffaa5f5f21a213da1be7bc917d33117f01990c8..954386a2b5002b9e37401dacbfa1852cb448cf9c 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -16,6 +16,7 @@ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf */ +#include #include #include #include @@ -443,16 +444,28 @@ static ssize_t ahci_show_em_supported(struct device *dev, void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) { void __iomem *mmio = hpriv->mmio; - u32 cap, cap2, vers, port_map; + void __iomem *port_mmio; + unsigned long port_map; + u32 cap, cap2, vers; int i; /* make sure AHCI mode is enabled before accessing CAP */ ahci_enable_ahci(mmio); - /* Values prefixed with saved_ are written back to host after - * reset. Values without are used for driver operation. + /* + * Values prefixed with saved_ are written back to the HBA and ports + * registers after reset. Values without are used for driver operation. + */ + + /* + * Override HW-init HBA capability fields with the platform-specific + * values. The rest of the HBA capabilities are defined as Read-only + * and can't be modified in CSR anyway. */ - hpriv->saved_cap = cap = readl(mmio + HOST_CAP); + cap = readl(mmio + HOST_CAP); + if (hpriv->saved_cap) + cap = (cap & ~(HOST_CAP_SSS | HOST_CAP_MPS)) | hpriv->saved_cap; + hpriv->saved_cap = cap; /* CAP2 register is only defined for AHCI 1.2 and later */ vers = readl(mmio + HOST_VERSION); @@ -519,7 +532,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) /* Override the HBA ports mapping if the platform needs it */ port_map = readl(mmio + HOST_PORTS_IMPL); if (hpriv->saved_port_map && port_map != hpriv->saved_port_map) { - dev_info(dev, "forcing port_map 0x%x -> 0x%x\n", + dev_info(dev, "forcing port_map 0x%lx -> 0x%x\n", port_map, hpriv->saved_port_map); port_map = hpriv->saved_port_map; } else { @@ -527,7 +540,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) } if (hpriv->mask_port_map) { - dev_warn(dev, "masking port_map 0x%x -> 0x%x\n", + dev_warn(dev, "masking port_map 0x%lx -> 0x%lx\n", port_map, port_map & hpriv->mask_port_map); port_map &= hpriv->mask_port_map; @@ -546,7 +559,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) */ if (map_ports > ahci_nr_ports(cap)) { dev_warn(dev, - "implemented port map (0x%x) contains more ports than nr_ports (%u), using nr_ports\n", + "implemented port map (0x%lx) contains more ports than nr_ports (%u), using nr_ports\n", port_map, ahci_nr_ports(cap)); port_map = 0; } @@ -555,12 +568,26 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv) /* fabricate port_map from cap.nr_ports for < AHCI 1.3 */ if (!port_map && vers < 0x10300) { port_map = (1 << ahci_nr_ports(cap)) - 1; - dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map); + dev_warn(dev, "forcing PORTS_IMPL to 0x%lx\n", port_map); /* write the fixed up value to the PI register */ hpriv->saved_port_map = port_map; } + /* + * Preserve the ports capabilities defined by the platform. Note there + * is no need in storing the rest of the P#.CMD fields since they are + * volatile. + */ + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + if (hpriv->saved_port_cap[i]) + continue; + + port_mmio = __ahci_port_base(hpriv, i); + hpriv->saved_port_cap[i] = + readl(port_mmio + PORT_CMD) & PORT_CMD_CAP; + } + /* record values to use during operation */ hpriv->cap = cap; hpriv->cap2 = cap2; @@ -590,13 +617,21 @@ EXPORT_SYMBOL_GPL(ahci_save_initial_config); static void ahci_restore_initial_config(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; + unsigned long port_map = hpriv->port_map; void __iomem *mmio = hpriv->mmio; + void __iomem *port_mmio; + int i; writel(hpriv->saved_cap, mmio + HOST_CAP); if (hpriv->saved_cap2) writel(hpriv->saved_cap2, mmio + HOST_CAP2); writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ + + for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) { + port_mmio = __ahci_port_base(hpriv, i); + writel(hpriv->saved_port_cap[i], port_mmio + PORT_CMD); + } } static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 01c195b6d9e655c8c28f32b466142525a2ee3b3f..86d15607533642e97b82e62fe28ada312c918e07 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -382,6 +382,34 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, return rc; } +static int ahci_platform_get_firmware(struct ahci_host_priv *hpriv, + struct device *dev) +{ + struct device_node *child; + u32 port; + + if (!of_property_read_u32(dev->of_node, "hba-cap", &hpriv->saved_cap)) + hpriv->saved_cap &= (HOST_CAP_SSS | HOST_CAP_MPS); + + of_property_read_u32(dev->of_node, + "ports-implemented", &hpriv->saved_port_map); + + for_each_child_of_node(dev->of_node, child) { + if (!of_device_is_available(child)) + continue; + + if (of_property_read_u32(child, "reg", &port)) { + of_node_put(child); + return -EINVAL; + } + + if (!of_property_read_u32(child, "hba-port-cap", &hpriv->saved_port_cap[port])) + hpriv->saved_port_cap[port] &= PORT_CMD_CAP; + } + + return 0; +} + /** * ahci_platform_get_resources - Get platform resources * @pdev: platform device to get resources for @@ -525,9 +553,6 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, goto err_out; } - of_property_read_u32(dev->of_node, - "ports-implemented", &hpriv->saved_port_map); - if (child_nodes) { for_each_child_of_node(dev->of_node, child) { u32 port; @@ -592,6 +617,15 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, if (rc == -EPROBE_DEFER) goto err_out; } + + /* + * Retrieve firmware-specific flags which then will be used to set + * the HW-init fields of HBA and its ports + */ + rc = ahci_platform_get_firmware(hpriv, dev); + if (rc) + goto err_out; + pm_runtime_enable(dev); pm_runtime_get_sync(dev); hpriv->got_runtime_pm = true;