diff --git a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt new file mode 100644 index 0000000000000000000000000000000000000000..d3bbdded4cbe8db90ce49648e95b6476212f27f6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt @@ -0,0 +1,23 @@ +* AT86RF230 IEEE 802.15.4 * + +Required properties: + - compatible: should be "atmel,at86rf230", "atmel,at86rf231", + "atmel,at86rf233" or "atmel,at86rf212" + - spi-max-frequency: maximal bus speed, should be set to 7500000 depends + sync or async operation mode + - reg: the chipselect index + - interrupts: the interrupt generated by the device + +Optional properties: + - reset-gpio: GPIO spec for the rstn pin + - sleep-gpio: GPIO spec for the slp_tr pin + +Example: + + at86rf231@0 { + compatible = "atmel,at86rf231"; + spi-max-frequency = <7500000>; + reg = <0>; + interrupts = <19 1>; + interrupt-parent = <&gpio3>; + }; diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index e36f194673a45a2035a15830571e4e2c02039839..4517b149ed0786946e44eb1a699fe232c2fbd166 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -692,10 +693,7 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb) if (rc < 0) goto err_rx; - rc = at86rf230_start(dev); - - return rc; - + return at86rf230_start(dev); err_rx: at86rf230_start(dev); err: @@ -963,33 +961,24 @@ static irqreturn_t at86rf230_isr_level(int irq, void *data) return at86rf230_isr(irq, data); } -static int at86rf230_irq_polarity(struct at86rf230_local *lp, int pol) -{ - return at86rf230_write_subreg(lp, SR_IRQ_POLARITY, pol); -} - static int at86rf230_hw_init(struct at86rf230_local *lp) { - struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data; - int rc, irq_pol; - u8 status; + int rc, irq_pol, irq_type; + u8 dvdd; u8 csma_seed[2]; - rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status); - if (rc) - return rc; - rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_FORCE_TRX_OFF); if (rc) return rc; + irq_type = irq_get_trigger_type(lp->spi->irq); /* configure irq polarity, defaults to high active */ - if (pdata->irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) + if (irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) irq_pol = IRQ_ACTIVE_LOW; else irq_pol = IRQ_ACTIVE_HIGH; - rc = at86rf230_irq_polarity(lp, irq_pol); + rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol); if (rc) return rc; @@ -1017,10 +1006,10 @@ static int at86rf230_hw_init(struct at86rf230_local *lp) /* Wait the next SLEEP cycle */ msleep(100); - rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &status); + rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &dvdd); if (rc) return rc; - if (!status) { + if (!dvdd) { dev_err(&lp->spi->dev, "DVDD error\n"); return -EINVAL; } @@ -1032,7 +1021,6 @@ static struct at86rf230_platform_data * at86rf230_get_pdata(struct spi_device *spi) { struct at86rf230_platform_data *pdata; - const char *irq_type; if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) return spi->dev.platform_data; @@ -1044,19 +1032,6 @@ at86rf230_get_pdata(struct spi_device *spi) pdata->rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0); pdata->slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0); - pdata->irq_type = IRQF_TRIGGER_RISING; - of_property_read_string(spi->dev.of_node, "irq-type", &irq_type); - if (!strcmp(irq_type, "level-high")) - pdata->irq_type = IRQF_TRIGGER_HIGH; - else if (!strcmp(irq_type, "level-low")) - pdata->irq_type = IRQF_TRIGGER_LOW; - else if (!strcmp(irq_type, "edge-rising")) - pdata->irq_type = IRQF_TRIGGER_RISING; - else if (!strcmp(irq_type, "edge-falling")) - pdata->irq_type = IRQF_TRIGGER_FALLING; - else - dev_warn(&spi->dev, "wrong irq-type specified using edge-rising\n"); - spi->dev.platform_data = pdata; done: return pdata; @@ -1071,7 +1046,7 @@ static int at86rf230_probe(struct spi_device *spi) u8 part = 0, version = 0, status; irq_handler_t irq_handler; work_func_t irq_worker; - int rc; + int rc, irq_type; const char *chip; struct ieee802154_ops *ops = NULL; @@ -1087,27 +1062,17 @@ static int at86rf230_probe(struct spi_device *spi) } if (gpio_is_valid(pdata->rstn)) { - rc = gpio_request(pdata->rstn, "rstn"); + rc = devm_gpio_request_one(&spi->dev, pdata->rstn, + GPIOF_OUT_INIT_HIGH, "rstn"); if (rc) return rc; } if (gpio_is_valid(pdata->slp_tr)) { - rc = gpio_request(pdata->slp_tr, "slp_tr"); - if (rc) - goto err_slp_tr; - } - - if (gpio_is_valid(pdata->rstn)) { - rc = gpio_direction_output(pdata->rstn, 1); - if (rc) - goto err_gpio_dir; - } - - if (gpio_is_valid(pdata->slp_tr)) { - rc = gpio_direction_output(pdata->slp_tr, 0); + rc = devm_gpio_request_one(&spi->dev, pdata->slp_tr, + GPIOF_OUT_INIT_LOW, "slp_tr"); if (rc) - goto err_gpio_dir; + return rc; } /* Reset */ @@ -1121,13 +1086,12 @@ static int at86rf230_probe(struct spi_device *spi) rc = __at86rf230_detect_device(spi, &man_id, &part, &version); if (rc < 0) - goto err_gpio_dir; + return rc; if (man_id != 0x001f) { dev_err(&spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n", man_id >> 8, man_id & 0xFF); - rc = -EINVAL; - goto err_gpio_dir; + return -EINVAL; } switch (part) { @@ -1154,16 +1118,12 @@ static int at86rf230_probe(struct spi_device *spi) } dev_info(&spi->dev, "Detected %s chip version %d\n", chip, version); - if (!ops) { - rc = -ENOTSUPP; - goto err_gpio_dir; - } + if (!ops) + return -ENOTSUPP; dev = ieee802154_alloc_device(sizeof(*lp), ops); - if (!dev) { - rc = -ENOMEM; - goto err_gpio_dir; - } + if (!dev) + return -ENOMEM; lp = dev->priv; lp->dev = dev; @@ -1176,7 +1136,8 @@ static int at86rf230_probe(struct spi_device *spi) dev->extra_tx_headroom = 0; dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK; - if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { + irq_type = irq_get_trigger_type(spi->irq); + if (irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { irq_worker = at86rf230_irqwork; irq_handler = at86rf230_isr; } else { @@ -1202,75 +1163,65 @@ static int at86rf230_probe(struct spi_device *spi) if (rc) goto err_hw_init; - rc = request_irq(spi->irq, irq_handler, - IRQF_SHARED | pdata->irq_type, - dev_name(&spi->dev), lp); + /* Read irq status register to reset irq line */ + rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status); if (rc) goto err_hw_init; - /* Read irq status register to reset irq line */ - rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status); + rc = devm_request_irq(&spi->dev, spi->irq, irq_handler, IRQF_SHARED, + dev_name(&spi->dev), lp); if (rc) - goto err_irq; + goto err_hw_init; rc = ieee802154_register_device(lp->dev); if (rc) - goto err_irq; + goto err_hw_init; return rc; -err_irq: - free_irq(spi->irq, lp); err_hw_init: flush_work(&lp->irqwork); - spi_set_drvdata(spi, NULL); mutex_destroy(&lp->bmux); ieee802154_free_device(lp->dev); -err_gpio_dir: - if (gpio_is_valid(pdata->slp_tr)) - gpio_free(pdata->slp_tr); -err_slp_tr: - if (gpio_is_valid(pdata->rstn)) - gpio_free(pdata->rstn); return rc; } static int at86rf230_remove(struct spi_device *spi) { struct at86rf230_local *lp = spi_get_drvdata(spi); - struct at86rf230_platform_data *pdata = spi->dev.platform_data; /* mask all at86rf230 irq's */ at86rf230_write_subreg(lp, SR_IRQ_MASK, 0); ieee802154_unregister_device(lp->dev); - - free_irq(spi->irq, lp); flush_work(&lp->irqwork); - - if (gpio_is_valid(pdata->slp_tr)) - gpio_free(pdata->slp_tr); - if (gpio_is_valid(pdata->rstn)) - gpio_free(pdata->rstn); - mutex_destroy(&lp->bmux); ieee802154_free_device(lp->dev); - dev_dbg(&spi->dev, "unregistered at86rf230\n"); + return 0; } -#if IS_ENABLED(CONFIG_OF) -static struct of_device_id at86rf230_of_match[] = { +static const struct of_device_id at86rf230_of_match[] = { { .compatible = "atmel,at86rf230", }, { .compatible = "atmel,at86rf231", }, { .compatible = "atmel,at86rf233", }, { .compatible = "atmel,at86rf212", }, { }, }; -#endif +MODULE_DEVICE_TABLE(of, at86rf230_of_match); + +static const struct spi_device_id at86rf230_device_id[] = { + { .name = "at86rf230", }, + { .name = "at86rf231", }, + { .name = "at86rf233", }, + { .name = "at86rf212", }, + { }, +}; +MODULE_DEVICE_TABLE(spi, at86rf230_device_id); static struct spi_driver at86rf230_driver = { + .id_table = at86rf230_device_id, .driver = { .of_match_table = of_match_ptr(at86rf230_of_match), .name = "at86rf230", diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h index aa327a8105ada0d2502d697c6f66699e8f8c516b..b2b1afbb32024ebbb80be196ea276a7ff53ae43e 100644 --- a/include/linux/spi/at86rf230.h +++ b/include/linux/spi/at86rf230.h @@ -26,20 +26,6 @@ struct at86rf230_platform_data { int rstn; int slp_tr; int dig2; - - /* Setting the irq_type will configure the driver to request - * the platform irq trigger type according to the given value - * and configure the interrupt polarity of the device to the - * corresponding polarity. - * - * Allowed values are: IRQF_TRIGGER_RISING, IRQF_TRIGGER_FALLING, - * IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW - * - * Setting it to 0, the driver does not touch the trigger type - * configuration of the interrupt and sets the interrupt polarity - * of the device to high active (the default value). - */ - int irq_type; }; #endif