diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index e7ae9fda3f5b79e1ca3c91a9941d15189d9f3668..eca93521124c7a5c378ebdb0d3ebd4c494287bb6 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -204,9 +204,11 @@ static struct {
 
 struct wm8993_priv {
 	struct wm_hubs_data hubs_data;
+	struct device *dev;
 	struct regmap *regmap;
 	struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
 	struct wm8993_platform_data pdata;
+	struct completion fll_lock;
 	int master;
 	int sysclk_source;
 	int tdm_slots;
@@ -225,6 +227,7 @@ static bool wm8993_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
 	case WM8993_SOFTWARE_RESET:
+	case WM8993_GPIO_CTRL_1:
 	case WM8993_DC_SERVO_0:
 	case WM8993_DC_SERVO_READBACK_0:
 	case WM8993_DC_SERVO_READBACK_1:
@@ -467,8 +470,10 @@ static int _wm8993_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 			  unsigned int Fref, unsigned int Fout)
 {
 	struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
+	struct i2c_client *i2c = to_i2c_client(codec->dev);
 	u16 reg1, reg4, reg5;
 	struct _fll_div fll_div;
+	unsigned int timeout;
 	int ret;
 
 	/* Any change? */
@@ -539,14 +544,22 @@ static int _wm8993_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 	reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
 	snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
 
+	/* If we've got an interrupt wired up make sure we get it */
+	if (i2c->irq)
+		timeout = msecs_to_jiffies(20);
+	else if (Fref < 1000000)
+		timeout = msecs_to_jiffies(3);
+	else
+		timeout = msecs_to_jiffies(1);
+
+	try_wait_for_completion(&wm8993->fll_lock);
+
 	/* Enable the FLL */
 	snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
 
-	/* Both overestimates */
-	if (Fref < 1000000)
-		msleep(3);
-	else
-		msleep(1);
+	timeout = wait_for_completion_timeout(&wm8993->fll_lock, timeout);
+	if (i2c->irq && !timeout)
+		dev_warn(codec->dev, "Timed out waiting for FLL\n");
 
 	dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
 
@@ -1471,6 +1484,45 @@ static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
 	return 0;
 }
 
+static irqreturn_t wm8993_irq(int irq, void *data)
+{
+	struct wm8993_priv *wm8993 = data;
+	int mask, val, ret;
+
+	ret = regmap_read(wm8993->regmap, WM8993_GPIO_CTRL_1, &val);
+	if (ret != 0) {
+		dev_err(wm8993->dev, "Failed to read interrupt status: %d\n",
+			ret);
+		return IRQ_NONE;
+	}
+
+	ret = regmap_read(wm8993->regmap, WM8993_GPIOCTRL_2, &mask);
+	if (ret != 0) {
+		dev_err(wm8993->dev, "Failed to read interrupt mask: %d\n",
+			ret);
+		return IRQ_NONE;
+	}
+
+	/* The IRQ pin status is visible in the register too */
+	val &= ~(mask | WM8993_IRQ);
+	if (!val)
+		return IRQ_NONE;
+
+	if (val & WM8993_TEMPOK_EINT)
+		dev_crit(wm8993->dev, "Thermal warning\n");
+
+	if (val & WM8993_FLL_LOCK_EINT) {
+		dev_dbg(wm8993->dev, "FLL locked\n");
+		complete(&wm8993->fll_lock);
+	}
+
+	ret = regmap_write(wm8993->regmap, WM8993_GPIO_CTRL_1, val);
+	if (ret != 0)
+		dev_err(wm8993->dev, "Failed to ack interrupt: %d\n", ret);
+
+	return IRQ_HANDLED;
+}
+
 static const struct snd_soc_dai_ops wm8993_ops = {
 	.set_sysclk = wm8993_set_sysclk,
 	.set_fmt = wm8993_set_dai_fmt,
@@ -1671,6 +1723,9 @@ static __devinit int wm8993_i2c_probe(struct i2c_client *i2c,
 	if (wm8993 == NULL)
 		return -ENOMEM;
 
+	wm8993->dev = &i2c->dev;
+	init_completion(&wm8993->fll_lock);
+
 	wm8993->regmap = regmap_init_i2c(i2c, &wm8993_regmap);
 	if (IS_ERR(wm8993->regmap)) {
 		ret = PTR_ERR(wm8993->regmap);
@@ -1713,6 +1768,22 @@ static __devinit int wm8993_i2c_probe(struct i2c_client *i2c,
 	if (ret != 0)
 		goto err_enable;
 
+	if (i2c->irq) {
+		/* Put GPIO1 into interrupt mode (only GPIO1 can output IRQ) */
+		ret = regmap_update_bits(wm8993->regmap, WM8993_GPIO1,
+					 WM8993_GPIO1_PD |
+					 WM8993_GPIO1_SEL_MASK, 7);
+		if (ret != 0)
+			goto err_enable;
+
+		ret = request_threaded_irq(i2c->irq, NULL, wm8993_irq,
+					   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					   "wm8993", wm8993);
+		if (ret != 0)
+			goto err_enable;
+
+	}
+
 	regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
 
 	regcache_cache_only(wm8993->regmap, true);
@@ -1721,11 +1792,14 @@ static __devinit int wm8993_i2c_probe(struct i2c_client *i2c,
 			&soc_codec_dev_wm8993, &wm8993_dai, 1);
 	if (ret != 0) {
 		dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
-		goto err_enable;
+		goto err_irq;
 	}
 
 	return 0;
 
+err_irq:
+	if (i2c->irq)
+		free_irq(i2c->irq, wm8993);
 err_enable:
 	regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
 err_get:
@@ -1735,11 +1809,13 @@ static __devinit int wm8993_i2c_probe(struct i2c_client *i2c,
 	return ret;
 }
 
-static __devexit int wm8993_i2c_remove(struct i2c_client *client)
+static __devexit int wm8993_i2c_remove(struct i2c_client *i2c)
 {
-	struct wm8993_priv *wm8993 = i2c_get_clientdata(client);
+	struct wm8993_priv *wm8993 = i2c_get_clientdata(i2c);
 
-	snd_soc_unregister_codec(&client->dev);
+	snd_soc_unregister_codec(&i2c->dev);
+	if (i2c->irq)
+		free_irq(i2c->irq, wm8993);
 	regmap_exit(wm8993->regmap);
 	regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
 	regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);