media: dt-bindings: marvell,mmp2-ccic: Add Marvell MMP2 camera

Add Marvell MMP2 camera host interface.
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt

+Marvell MMP2 camera host interface
+
+Required properties:
+ - compatible: Should be "marvell,mmp2-ccic".
+ - reg: Register base and size.
+ - interrupts: The interrupt number.
+ - #clock-cells: Must be 0.
+
+Optional properties:
+ - clocks: Reference to the input clock as specified by
+           Documentation/devicetree/bindings/clock/clock-bindings.txt.
+ - clock-names: Names of the clocks used; "axi" for the AXI bus interface,
+                "func" for the peripheral clock and "phy" for the parallel
+                video bus interface.
+ - clock-output-names: Optional clock source for sensors. Shall be "mclk".
+
+Required subnodes:
+ - port: The parallel bus interface port with a single endpoint linked to
+         the sensor's endpoint as described in
+         Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required endpoint properties:
+ - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively
+ - pclk-sample: pixel clock polarity
+ - hsync-active: horizontal synchronization polarity (only required for
+   parallel bus)
+ - vsync-active: vertical synchronization polarity (only required for
+   parallel bus)
+
+Example:
+
+	camera0: camera@d420a000 {
+		compatible = "marvell,mmp2-ccic";
+		reg = <0xd420a000 0x800>;
+		interrupts = <42>;
+		clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+		clock-names = "axi";
+		#clock-cells = <0>;
+		clock-output-names = "mclk";
+
+		port {
+			camera0_0: endpoint {
+				remote-endpoint = <&ov7670_0>;
+                                bus-type = <5>;      /* Parallel */
+                                hsync-active = <1>;  /* Active high */
+                                vsync-active = <1>;  /* Active high */
+                                pclk-sample = <0>;   /* Falling */
+			};
+		};
+	};