clocksource: scx200_hrt: Convert scx200 to use clocksource_register_hz

Converts the scx200 clocksource to using clocksource_register_hz.

CC: Jim Cromie <jim.cromie@gmail.com>
Tested-by: NJim Cromie <jim.cromie@gmail.com>
Acked-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

drivers/clocksource/scx200_hrt.c

@@ -49,9 +49,6 @@ static cycle_t read_hrt(struct clocksource *cs)
 	return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
 }
 
-#define HRT_SHIFT_1	22
-#define HRT_SHIFT_27	26
-
 static struct clocksource cs_hrt = {
 	.name		= "scx200_hrt",
 	.rating		= 250,
@@ -63,6 +60,7 @@ static struct clocksource cs_hrt = {
 
 static int __init init_hrt_clocksource(void)
 {
+	u32 freq;
 	/* Make sure scx200 has initialized the configuration block */
 	if (!scx200_cb_present())
 		return -ENODEV;
@@ -79,19 +77,15 @@ static int __init init_hrt_clocksource(void)
 	outb(HR_TMEN | (mhz27 ? HR_TMCLKSEL : 0),
 	     scx200_cb_base + SCx200_TMCNFG_OFFSET);
 
-	if (mhz27) {
-		cs_hrt.shift = HRT_SHIFT_27;
-		cs_hrt.mult = clocksource_hz2mult((HRT_FREQ + ppm) * 27,
-						  cs_hrt.shift);
-	} else {
-		cs_hrt.shift = HRT_SHIFT_1;
-		cs_hrt.mult = clocksource_hz2mult(HRT_FREQ + ppm,
-						  cs_hrt.shift);
-	}
+	freq = (HRT_FREQ + ppm);
+	if (mhz27)
+		freq *= 27;
+
 	pr_info("enabling scx200 high-res timer (%s MHz +%d ppm)\n",
+	printk(KERN_INFO "enabling scx200 high-res timer (%s MHz +%d ppm)\n",
 		mhz27 ? "27":"1", ppm);
 
-	return clocksource_register(&cs_hrt);
+	return clocksource_register_hz(&cs_hrt, freq);
 }
 
 module_init(init_hrt_clocksource);