[media] easycap: streamline the code

change statements of types
	if (err)
		return err
	else
		do something

and
	if (ok)
		do something
	else
		return err

into

	if (err)
		return err

	do something
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/media/easycap/easycap_ioctl.c

@@ -666,16 +666,15 @@ int adjust_brightness(struct easycap *peasycap, int value)
 				peasycap->inputset[peasycap->input].brightness_ok = 1;
 			} else
 				JOM(8, "%i=peasycap->input\n", peasycap->input);
+
 			mood = 0x00FF & (unsigned int)peasycap->brightness;
-			if (!write_saa(peasycap->pusb_device, 0x0A, mood)) {
-				SAM("adjusting brightness to  0x%02X\n", mood);
-				return 0;
-			} else {
+			if (write_saa(peasycap->pusb_device, 0x0A, mood)) {
 				SAM("WARNING: failed to adjust brightness "
 				    "to 0x%02X\n", mood);
 				return -ENOENT;
 			}
-			break;
+			SAM("adjusting brightness to  0x%02X\n", mood);
+			return 0;
 		}
 		i1++;
 	}
@@ -725,15 +724,13 @@ int adjust_contrast(struct easycap *peasycap, int value)
 				JOM(8, "%i=peasycap->input\n", peasycap->input);
 
 			mood = 0x00FF & (unsigned int) (peasycap->contrast - 128);
-			if (!write_saa(peasycap->pusb_device, 0x0B, mood)) {
-				SAM("adjusting contrast to  0x%02X\n", mood);
-				return 0;
-			} else {
+			if (write_saa(peasycap->pusb_device, 0x0B, mood)) {
 				SAM("WARNING: failed to adjust contrast to "
 				    "0x%02X\n", mood);
 				return -ENOENT;
 			}
-			break;
+			SAM("adjusting contrast to  0x%02X\n", mood);
+			return 0;
 		}
 		i1++;
 	}
@@ -783,14 +780,13 @@ int adjust_saturation(struct easycap *peasycap, int value)
 			} else
 				JOM(8, "%i=peasycap->input\n", peasycap->input);
 			mood = 0x00FF & (unsigned int) (peasycap->saturation - 128);
-			if (!write_saa(peasycap->pusb_device, 0x0C, mood)) {
-				SAM("adjusting saturation to  0x%02X\n", mood);
-				return 0;
-			} else {
+			if (write_saa(peasycap->pusb_device, 0x0C, mood)) {
 				SAM("WARNING: failed to adjust saturation to "
 				    "0x%02X\n", mood);
 				return -ENOENT;
 			}
+			SAM("adjusting saturation to  0x%02X\n", mood);
+			return 0;
 			break;
 		}
 		i1++;
@@ -838,13 +834,12 @@ int adjust_hue(struct easycap *peasycap, int value)
 				JOM(8, "%i=peasycap->input\n", peasycap->input);
 			i2 = peasycap->hue - 128;
 			mood = 0x00FF & ((int) i2);
-			if (!write_saa(peasycap->pusb_device, 0x0D, mood)) {
-				SAM("adjusting hue to  0x%02X\n", mood);
-				return 0;
-			} else {
+			if (write_saa(peasycap->pusb_device, 0x0D, mood)) {
 				SAM("WARNING: failed to adjust hue to 0x%02X\n", mood);
 				return -ENOENT;
 			}
+			SAM("adjusting hue to  0x%02X\n", mood);
+			return 0;
 			break;
 		}
 		i1++;
@@ -885,14 +880,12 @@ static int adjust_volume(struct easycap *peasycap, int value)
 				((31 < peasycap->volume) ? 31 :
 				  (s8) peasycap->volume);
 			if (!audio_gainset(peasycap->pusb_device, mood)) {
-				SAM("adjusting volume to 0x%02X\n", mood);
-				return 0;
-			} else {
 				SAM("WARNING: failed to adjust volume to "
 				    "0x%2X\n", mood);
 				return -ENOENT;
 			}
-			break;
+			SAM("adjusting volume to 0x%02X\n", mood);
+			return 0;
 		}
 		i1++;
 	}

drivers/staging/media/easycap/easycap_low.c

@@ -514,9 +514,10 @@ int ready_saa(struct usb_device *p)
 		msleep(marktime);
 		j++;
 	}
+
 	if (max == j)
 		return -1;
-	else {
+
 	if (0x20 & rc) {
 		rate = 2;
 		JOT(8, "hardware detects 60 Hz\n");
@@ -530,7 +531,6 @@ int ready_saa(struct usb_device *p)
 		rate++;
 		JOT(8, "hardware detects no interlacing\n");
 	}
-	}
 	return 0;
 }
 /****************************************************************************/

drivers/staging/media/easycap/easycap_main.c

@@ -165,14 +165,13 @@ static int easycap_open(struct inode *inode, struct file *file)
 	if (!peasycap->pusb_device) {
 		SAM("ERROR: peasycap->pusb_device is NULL\n");
 		return -EFAULT;
-	} else {
-		JOM(16, "peasycap->pusb_device=%p\n", peasycap->pusb_device);
 	}
+
+	JOM(16, "peasycap->pusb_device=%p\n", peasycap->pusb_device);
+
 	file->private_data = peasycap;
 	rc = wakeup_device(peasycap->pusb_device);
-	if (0 == rc)
-		JOM(8, "wakeup_device() OK\n");
-	else {
+	if (rc) {
 		SAM("ERROR: wakeup_device() rc = %i\n", rc);
 		if (-ENODEV == rc)
 			SAM("ERROR: wakeup_device() returned -ENODEV\n");
@@ -180,6 +179,7 @@ static int easycap_open(struct inode *inode, struct file *file)
 			SAM("ERROR: wakeup_device() rc = %i\n", rc);
 		return rc;
 	}
+	JOM(8, "wakeup_device() OK\n");
 	peasycap->input = 0;
 	rc = reset(peasycap);
 	if (rc) {
@@ -987,11 +987,11 @@ static unsigned int easycap_poll(struct file *file, poll_table *wait)
 	rc = easycap_dqbuf(peasycap, 0);
 	peasycap->polled = 1;
 	mutex_unlock(&easycapdc60_dongle[kd].mutex_video);
-	if (0 == rc)
-		return POLLIN | POLLRDNORM;
-	else
+	if (rc)
 		return POLLERR;
-	}
+
+	return POLLIN | POLLRDNORM;
+}
 /*****************************************************************************/
 /*---------------------------------------------------------------------------*/
 /*
@@ -2920,6 +2920,7 @@ static int easycap_usb_probe(struct usb_interface *intf,
 		SAY("ERROR: usb_host_interface not found\n");
 		return -EFAULT;
 	}
+
 	interface = &alt->desc;
 	if (!interface) {
 		SAY("ERROR: intf_descriptor is NULL\n");
@@ -2979,17 +2980,8 @@ static int easycap_usb_probe(struct usb_interface *intf,
 		if (mutex_lock_interruptible(&mutex_dongle)) {
 			SAY("ERROR: cannot down mutex_dongle\n");
 			return -ERESTARTSYS;
-		} else {
-/*---------------------------------------------------------------------------*/
-		/*
-		 *  FOR INTERFACES 1 AND 2 THE POINTER peasycap WILL NEED TO
-		 *  TO BE THE SAME AS THAT ALLOCATED NOW FOR INTERFACE 0.
-		 *
-		 *  NORMALLY ndong WILL NOT HAVE CHANGED SINCE INTERFACE 0 WAS
-		 *  PROBED, BUT THIS MAY NOT BE THE CASE IF, FOR EXAMPLE, TWO
-		 *  EASYCAPs ARE PLUGGED IN SIMULTANEOUSLY.
-		*/
-/*---------------------------------------------------------------------------*/
+		}
+
 		for (ndong = 0; ndong < DONGLE_MANY; ndong++) {
 			if ((!easycapdc60_dongle[ndong].peasycap) &&
 					(!mutex_is_locked(&easycapdc60_dongle
@@ -3004,13 +2996,14 @@ static int easycap_usb_probe(struct usb_interface *intf,
 				break;
 			}
 		}
+
 		if (DONGLE_MANY <= ndong) {
 			SAM("ERROR: too many dongles\n");
 			mutex_unlock(&mutex_dongle);
 			return -ENOMEM;
 		}
 		mutex_unlock(&mutex_dongle);
-		}
+
 		peasycap->allocation_video_struct = sizeof(struct easycap);
 		peasycap->allocation_video_page = 0;
 		peasycap->allocation_video_urb = 0;
@@ -3393,11 +3386,10 @@ static int easycap_usb_probe(struct usb_interface *intf,
 		if (!isokalt) {
 			SAM("ERROR:  no viable video_altsetting_on\n");
 			return -ENOENT;
-		} else {
+		}
 		peasycap->video_altsetting_on = okalt[isokalt - 1];
 		JOM(4, "%i=video_altsetting_on <====\n",
 					peasycap->video_altsetting_on);
-		}
 /*---------------------------------------------------------------------------*/
 /*
  *  DECIDE THE VIDEO STREAMING PARAMETERS
@@ -3483,7 +3475,8 @@ static int easycap_usb_probe(struct usb_interface *intf,
 						SAM("ERROR: Could not allocate frame "
 							"buffer %i page %i\n", k, m);
 						return -ENOMEM;
-					} else
+					}
+
 					peasycap->allocation_video_page += 1;
 					peasycap->frame_buffer[k][m].pgo = pbuf;
 				}
@@ -3514,7 +3507,7 @@ static int easycap_usb_probe(struct usb_interface *intf,
 							" buffer %i page %i\n", k, m);
 						return -ENOMEM;
 					}
-					else
+
 					peasycap->allocation_video_page += 1;
 					peasycap->field_buffer[k][m].pgo = pbuf;
 				}
@@ -3541,7 +3534,7 @@ static int easycap_usb_probe(struct usb_interface *intf,
 				SAM("ERROR: Could not allocate isoc video buffer "
 									"%i\n", k);
 				return -ENOMEM;
-			} else
+			}
 			peasycap->allocation_video_page +=
 						BIT(VIDEO_ISOC_ORDER);
 
@@ -3572,14 +3565,16 @@ static int easycap_usb_probe(struct usb_interface *intf,
 				SAM("ERROR: usb_alloc_urb returned NULL for buffer "
 									"%i\n", k);
 				return -ENOMEM;
-			} else
+			}
+
 			peasycap->allocation_video_urb += 1;
 /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
 			pdata_urb = kzalloc(sizeof(struct data_urb), GFP_KERNEL);
 			if (!pdata_urb) {
 				SAM("ERROR: Could not allocate struct data_urb.\n");
 				return -ENOMEM;
-			} else
+			}
+
 			peasycap->allocation_video_struct +=
 							sizeof(struct data_urb);
 
@@ -3697,13 +3692,12 @@ static int easycap_usb_probe(struct usb_interface *intf,
 			err("Not able to register with videodev");
 			videodev_release(&(peasycap->video_device));
 			return -ENODEV;
-		} else {
-			(peasycap->registered_video)++;
+		}
+
+		peasycap->registered_video++;
 		SAM("registered with videodev: %i=minor\n",
 						peasycap->video_device.minor);
 		peasycap->minor = peasycap->video_device.minor;
-		}
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
 
 		break;
 	}
@@ -3737,11 +3731,10 @@ static int easycap_usb_probe(struct usb_interface *intf,
 		if (!isokalt) {
 			SAM("ERROR:  no viable audio_altsetting_on\n");
 			return -ENOENT;
-		} else {
+		}
 		peasycap->audio_altsetting_on = okalt[isokalt - 1];
 		JOM(4, "%i=audio_altsetting_on <====\n",
 						peasycap->audio_altsetting_on);
-		}
 
 		peasycap->audio_endpointnumber = okepn[isokalt - 1];
 		JOM(4, "%i=audio_endpointnumber\n", peasycap->audio_endpointnumber);
@@ -3850,7 +3843,7 @@ static int easycap_usb_probe(struct usb_interface *intf,
 				SAM("ERROR: Could not allocate isoc audio buffer "
 								"%i\n", k);
 				return -ENOMEM;
-			} else
+			}
 			peasycap->allocation_audio_page +=
 						BIT(AUDIO_ISOC_ORDER);