提交 0f6e38a6 编写于 作者: L Linus Torvalds

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: kgdboc console poll hooks for mpsc uart
  kgdb: kgdboc console poll hooks for cpm uart
  kgdb, powerpc: arch specific powerpc kgdb support
  kgdb: support for ARCH=arm
  kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variable
......@@ -12,6 +12,7 @@ config ARM
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FTRACE if (!XIP_KERNEL)
......
......@@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
......
/*
* arch/arm/kernel/kgdb.c
*
* ARM KGDB support
*
* Copyright (c) 2002-2004 MontaVista Software, Inc
* Copyright (c) 2008 Wind River Systems, Inc.
*
* Authors: George Davis <davis_g@mvista.com>
* Deepak Saxena <dsaxena@plexity.net>
*/
#include <linux/kgdb.h>
#include <asm/traps.h>
/* Make a local copy of the registers passed into the handler (bletch) */
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
{
int regno;
/* Initialize all to zero. */
for (regno = 0; regno < GDB_MAX_REGS; regno++)
gdb_regs[regno] = 0;
gdb_regs[_R0] = kernel_regs->ARM_r0;
gdb_regs[_R1] = kernel_regs->ARM_r1;
gdb_regs[_R2] = kernel_regs->ARM_r2;
gdb_regs[_R3] = kernel_regs->ARM_r3;
gdb_regs[_R4] = kernel_regs->ARM_r4;
gdb_regs[_R5] = kernel_regs->ARM_r5;
gdb_regs[_R6] = kernel_regs->ARM_r6;
gdb_regs[_R7] = kernel_regs->ARM_r7;
gdb_regs[_R8] = kernel_regs->ARM_r8;
gdb_regs[_R9] = kernel_regs->ARM_r9;
gdb_regs[_R10] = kernel_regs->ARM_r10;
gdb_regs[_FP] = kernel_regs->ARM_fp;
gdb_regs[_IP] = kernel_regs->ARM_ip;
gdb_regs[_SPT] = kernel_regs->ARM_sp;
gdb_regs[_LR] = kernel_regs->ARM_lr;
gdb_regs[_PC] = kernel_regs->ARM_pc;
gdb_regs[_CPSR] = kernel_regs->ARM_cpsr;
}
/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
{
kernel_regs->ARM_r0 = gdb_regs[_R0];
kernel_regs->ARM_r1 = gdb_regs[_R1];
kernel_regs->ARM_r2 = gdb_regs[_R2];
kernel_regs->ARM_r3 = gdb_regs[_R3];
kernel_regs->ARM_r4 = gdb_regs[_R4];
kernel_regs->ARM_r5 = gdb_regs[_R5];
kernel_regs->ARM_r6 = gdb_regs[_R6];
kernel_regs->ARM_r7 = gdb_regs[_R7];
kernel_regs->ARM_r8 = gdb_regs[_R8];
kernel_regs->ARM_r9 = gdb_regs[_R9];
kernel_regs->ARM_r10 = gdb_regs[_R10];
kernel_regs->ARM_fp = gdb_regs[_FP];
kernel_regs->ARM_ip = gdb_regs[_IP];
kernel_regs->ARM_sp = gdb_regs[_SPT];
kernel_regs->ARM_lr = gdb_regs[_LR];
kernel_regs->ARM_pc = gdb_regs[_PC];
kernel_regs->ARM_cpsr = gdb_regs[_CPSR];
}
void
sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
{
struct pt_regs *thread_regs;
int regno;
/* Just making sure... */
if (task == NULL)
return;
/* Initialize to zero */
for (regno = 0; regno < GDB_MAX_REGS; regno++)
gdb_regs[regno] = 0;
/* Otherwise, we have only some registers from switch_to() */
thread_regs = task_pt_regs(task);
gdb_regs[_R0] = thread_regs->ARM_r0;
gdb_regs[_R1] = thread_regs->ARM_r1;
gdb_regs[_R2] = thread_regs->ARM_r2;
gdb_regs[_R3] = thread_regs->ARM_r3;
gdb_regs[_R4] = thread_regs->ARM_r4;
gdb_regs[_R5] = thread_regs->ARM_r5;
gdb_regs[_R6] = thread_regs->ARM_r6;
gdb_regs[_R7] = thread_regs->ARM_r7;
gdb_regs[_R8] = thread_regs->ARM_r8;
gdb_regs[_R9] = thread_regs->ARM_r9;
gdb_regs[_R10] = thread_regs->ARM_r10;
gdb_regs[_FP] = thread_regs->ARM_fp;
gdb_regs[_IP] = thread_regs->ARM_ip;
gdb_regs[_SPT] = thread_regs->ARM_sp;
gdb_regs[_LR] = thread_regs->ARM_lr;
gdb_regs[_PC] = thread_regs->ARM_pc;
gdb_regs[_CPSR] = thread_regs->ARM_cpsr;
}
static int compiled_break;
int kgdb_arch_handle_exception(int exception_vector, int signo,
int err_code, char *remcom_in_buffer,
char *remcom_out_buffer,
struct pt_regs *linux_regs)
{
unsigned long addr;
char *ptr;
switch (remcom_in_buffer[0]) {
case 'D':
case 'k':
case 'c':
kgdb_contthread = NULL;
/*
* Try to read optional parameter, pc unchanged if no parm.
* If this was a compiled breakpoint, we need to move
* to the next instruction or we will just breakpoint
* over and over again.
*/
ptr = &remcom_in_buffer[1];
if (kgdb_hex2long(&ptr, &addr))
linux_regs->ARM_pc = addr;
else if (compiled_break == 1)
linux_regs->ARM_pc += 4;
compiled_break = 0;
return 0;
}
return -1;
}
static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
{
kgdb_handle_exception(1, SIGTRAP, 0, regs);
return 0;
}
static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
{
compiled_break = 1;
kgdb_handle_exception(1, SIGTRAP, 0, regs);
return 0;
}
static struct undef_hook kgdb_brkpt_hook = {
.instr_mask = 0xffffffff,
.instr_val = KGDB_BREAKINST,
.fn = kgdb_brk_fn
};
static struct undef_hook kgdb_compiled_brkpt_hook = {
.instr_mask = 0xffffffff,
.instr_val = KGDB_COMPILED_BREAK,
.fn = kgdb_compiled_brk_fn
};
/**
* kgdb_arch_init - Perform any architecture specific initalization.
*
* This function will handle the initalization of any architecture
* specific callbacks.
*/
int kgdb_arch_init(void)
{
register_undef_hook(&kgdb_brkpt_hook);
register_undef_hook(&kgdb_compiled_brkpt_hook);
return 0;
}
/**
* kgdb_arch_exit - Perform any architecture specific uninitalization.
*
* This function will handle the uninitalization of any architecture
* specific callbacks, for dynamic registration and unregistration.
*/
void kgdb_arch_exit(void)
{
unregister_undef_hook(&kgdb_brkpt_hook);
unregister_undef_hook(&kgdb_compiled_brkpt_hook);
}
/*
* Register our undef instruction hooks with ARM undef core.
* We regsiter a hook specifically looking for the KGB break inst
* and we handle the normal undef case within the do_undefinstr
* handler.
*/
struct kgdb_arch arch_kgdb_ops = {
#ifndef __ARMEB__
.gdb_bpt_instr = {0xfe, 0xde, 0xff, 0xe7}
#else /* ! __ARMEB__ */
.gdb_bpt_instr = {0xe7, 0xff, 0xde, 0xfe}
#endif
};
......@@ -36,6 +36,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/traps.h>
#include "compat.h"
#include "atags.h"
......@@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &dummy_con;
#endif
#endif
early_trap_init();
}
......
......@@ -707,6 +707,11 @@ void abort(void)
EXPORT_SYMBOL(abort);
void __init trap_init(void)
{
return;
}
void __init early_trap_init(void)
{
unsigned long vectors = CONFIG_VECTORS_BASE;
extern char __stubs_start[], __stubs_end[];
......
......@@ -112,6 +112,7 @@ config PPC
select HAVE_FTRACE
select HAVE_IDE
select HAVE_KPROBES
select HAVE_ARCH_KGDB
select HAVE_KRETPROBES
select HAVE_LMB
select HAVE_DMA_ATTRS if PPC64
......
......@@ -41,22 +41,6 @@ config HCALL_STATS
This option will add a small amount of overhead to all hypervisor
calls.
config DEBUGGER
bool "Enable debugger hooks"
depends on DEBUG_KERNEL
help
Include in-kernel hooks for kernel debuggers. Unless you are
intending to debug the kernel, say N here.
config KGDB
bool "Include kgdb kernel debugger"
depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
select DEBUG_INFO
help
Include in-kernel hooks for kgdb, the Linux kernel source level
debugger. See <http://kgdb.sourceforge.net/> for more information.
Unless you are intending to debug the kernel, say N here.
config CODE_PATCHING_SELFTEST
bool "Run self-tests of the code-patching code."
depends on DEBUG_KERNEL
......@@ -67,36 +51,9 @@ config FTR_FIXUP_SELFTEST
depends on DEBUG_KERNEL
default n
choice
prompt "Serial Port"
depends on KGDB
default KGDB_TTYS1
config KGDB_TTYS0
bool "ttyS0"
config KGDB_TTYS1
bool "ttyS1"
config KGDB_TTYS2
bool "ttyS2"
config KGDB_TTYS3
bool "ttyS3"
endchoice
config KGDB_CONSOLE
bool "Enable serial console thru kgdb port"
depends on KGDB && 8xx || CPM2
help
If you enable this, all serial console messages will be sent
over the gdb stub.
If unsure, say N.
config XMON
bool "Include xmon kernel debugger"
depends on DEBUGGER
depends on DEBUG_KERNEL
help
Include in-kernel hooks for the xmon kernel monitor/debugger.
Unless you are intending to debug the kernel, say N here.
......@@ -126,6 +83,11 @@ config XMON_DISASSEMBLY
to say Y here, unless you're building for a memory-constrained
system.
config DEBUGGER
bool
depends on KGDB || XMON
default y
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
help
......
......@@ -74,6 +74,7 @@ obj-y += time.o prom.o traps.o setup-common.o \
misc_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma_64.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
......
/*
* PowerPC backend to the KGDB stub.
*
* 1998 (c) Michael AK Tesch (tesch@cs.wisc.edu)
* Copyright (C) 2003 Timesys Corporation.
* Copyright (C) 2004-2006 MontaVista Software, Inc.
* PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
* PPC32 support restored by Vitaly Wool <vwool@ru.mvista.com> and
* Sergei Shtylyov <sshtylyov@ru.mvista.com>
* Copyright (C) 2007-2008 Wind River Systems, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program as licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/kgdb.h>
#include <linux/smp.h>
#include <linux/signal.h>
#include <linux/ptrace.h>
#include <asm/current.h>
#include <asm/processor.h>
#include <asm/machdep.h>
/*
* This table contains the mapping between PowerPC hardware trap types, and
* signals, which are primarily what GDB understands. GDB and the kernel
* don't always agree on values, so we use constants taken from gdb-6.2.
*/
static struct hard_trap_info
{
unsigned int tt; /* Trap type code for powerpc */
unsigned char signo; /* Signal that we map this trap into */
} hard_trap_info[] = {
{ 0x0100, 0x02 /* SIGINT */ }, /* system reset */
{ 0x0200, 0x0b /* SIGSEGV */ }, /* machine check */
{ 0x0300, 0x0b /* SIGSEGV */ }, /* data access */
{ 0x0400, 0x0b /* SIGSEGV */ }, /* instruction access */
{ 0x0500, 0x02 /* SIGINT */ }, /* external interrupt */
{ 0x0600, 0x0a /* SIGBUS */ }, /* alignment */
{ 0x0700, 0x05 /* SIGTRAP */ }, /* program check */
{ 0x0800, 0x08 /* SIGFPE */ }, /* fp unavailable */
{ 0x0900, 0x0e /* SIGALRM */ }, /* decrementer */
{ 0x0c00, 0x14 /* SIGCHLD */ }, /* system call */
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
{ 0x2002, 0x05 /* SIGTRAP */ }, /* debug */
#if defined(CONFIG_FSL_BOOKE)
{ 0x2010, 0x08 /* SIGFPE */ }, /* spe unavailable */
{ 0x2020, 0x08 /* SIGFPE */ }, /* spe unavailable */
{ 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */
{ 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */
{ 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */
{ 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */
{ 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */
{ 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */
{ 0x3200, 0x02 /* SIGINT */ }, /* watchdog */
#else /* ! CONFIG_FSL_BOOKE */
{ 0x1000, 0x0e /* SIGALRM */ }, /* prog interval timer */
{ 0x1010, 0x0e /* SIGALRM */ }, /* fixed interval timer */
{ 0x1020, 0x02 /* SIGINT */ }, /* watchdog */
{ 0x2010, 0x08 /* SIGFPE */ }, /* fp unavailable */
{ 0x2020, 0x08 /* SIGFPE */ }, /* ap unavailable */
#endif
#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */
{ 0x0d00, 0x05 /* SIGTRAP */ }, /* single-step */
#if defined(CONFIG_8xx)
{ 0x1000, 0x04 /* SIGILL */ }, /* software emulation */
#else /* ! CONFIG_8xx */
{ 0x0f00, 0x04 /* SIGILL */ }, /* performance monitor */
{ 0x0f20, 0x08 /* SIGFPE */ }, /* altivec unavailable */
{ 0x1300, 0x05 /* SIGTRAP */ }, /* instruction address break */
#if defined(CONFIG_PPC64)
{ 0x1200, 0x05 /* SIGILL */ }, /* system error */
{ 0x1500, 0x04 /* SIGILL */ }, /* soft patch */
{ 0x1600, 0x04 /* SIGILL */ }, /* maintenance */
{ 0x1700, 0x08 /* SIGFPE */ }, /* altivec assist */
{ 0x1800, 0x04 /* SIGILL */ }, /* thermal */
#else /* ! CONFIG_PPC64 */
{ 0x1400, 0x02 /* SIGINT */ }, /* SMI */
{ 0x1600, 0x08 /* SIGFPE */ }, /* altivec assist */
{ 0x1700, 0x04 /* SIGILL */ }, /* TAU */
{ 0x2000, 0x05 /* SIGTRAP */ }, /* run mode */
#endif
#endif
#endif
{ 0x0000, 0x00 } /* Must be last */
};
static int computeSignal(unsigned int tt)
{
struct hard_trap_info *ht;
for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
if (ht->tt == tt)
return ht->signo;
return SIGHUP; /* default for things we don't know about */
}
static int kgdb_call_nmi_hook(struct pt_regs *regs)
{
kgdb_nmicallback(raw_smp_processor_id(), regs);
return 0;
}
#ifdef CONFIG_SMP
void kgdb_roundup_cpus(unsigned long flags)
{
smp_send_debugger_break(MSG_ALL_BUT_SELF);
}
#endif
/* KGDB functions to use existing PowerPC64 hooks. */
static int kgdb_debugger(struct pt_regs *regs)
{
return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
}
static int kgdb_handle_breakpoint(struct pt_regs *regs)
{
if (user_mode(regs))
return 0;
if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
return 0;
if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
regs->nip += 4;
return 1;
}
static int kgdb_singlestep(struct pt_regs *regs)
{
struct thread_info *thread_info, *exception_thread_info;
if (user_mode(regs))
return 0;
/*
* On Book E and perhaps other processsors, singlestep is handled on
* the critical exception stack. This causes current_thread_info()
* to fail, since it it locates the thread_info by masking off
* the low bits of the current stack pointer. We work around
* this issue by copying the thread_info from the kernel stack
* before calling kgdb_handle_exception, and copying it back
* afterwards. On most processors the copy is avoided since
* exception_thread_info == thread_info.
*/
thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
exception_thread_info = current_thread_info();
if (thread_info != exception_thread_info)
memcpy(exception_thread_info, thread_info, sizeof *thread_info);
kgdb_handle_exception(0, SIGTRAP, 0, regs);
if (thread_info != exception_thread_info)
memcpy(thread_info, exception_thread_info, sizeof *thread_info);
return 1;
}
static int kgdb_iabr_match(struct pt_regs *regs)
{
if (user_mode(regs))
return 0;
if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
return 0;
return 1;
}
static int kgdb_dabr_match(struct pt_regs *regs)
{
if (user_mode(regs))
return 0;
if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
return 0;
return 1;
}
#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0)
#define PACK32(ptr, src) do { \
u32 *ptr32; \
ptr32 = (u32 *)ptr; \
*(ptr32++) = (src); \
ptr = (unsigned long *)ptr32; \
} while (0)
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
unsigned long *ptr = gdb_regs;
int reg;
memset(gdb_regs, 0, NUMREGBYTES);
for (reg = 0; reg < 32; reg++)
PACK64(ptr, regs->gpr[reg]);
#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_SPE
for (reg = 0; reg < 32; reg++)
PACK64(ptr, current->thread.evr[reg]);
#else
ptr += 32;
#endif
#else
/* fp registers not used by kernel, leave zero */
ptr += 32 * 8 / sizeof(long);
#endif
PACK64(ptr, regs->nip);
PACK64(ptr, regs->msr);
PACK32(ptr, regs->ccr);
PACK64(ptr, regs->link);
PACK64(ptr, regs->ctr);
PACK32(ptr, regs->xer);
BUG_ON((unsigned long)ptr >
(unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
}
void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
{
struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp +
STACK_FRAME_OVERHEAD);
unsigned long *ptr = gdb_regs;
int reg;
memset(gdb_regs, 0, NUMREGBYTES);
/* Regs GPR0-2 */
for (reg = 0; reg < 3; reg++)
PACK64(ptr, regs->gpr[reg]);
/* Regs GPR3-13 are caller saved, not in regs->gpr[] */
ptr += 11;
/* Regs GPR14-31 */
for (reg = 14; reg < 32; reg++)
PACK64(ptr, regs->gpr[reg]);
#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_SPE
for (reg = 0; reg < 32; reg++)
PACK64(ptr, p->thread.evr[reg]);
#else
ptr += 32;
#endif
#else
/* fp registers not used by kernel, leave zero */
ptr += 32 * 8 / sizeof(long);
#endif
PACK64(ptr, regs->nip);
PACK64(ptr, regs->msr);
PACK32(ptr, regs->ccr);
PACK64(ptr, regs->link);
PACK64(ptr, regs->ctr);
PACK32(ptr, regs->xer);
BUG_ON((unsigned long)ptr >
(unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
}
#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0)
#define UNPACK32(dest, ptr) do { \
u32 *ptr32; \
ptr32 = (u32 *)ptr; \
dest = *(ptr32++); \
ptr = (unsigned long *)ptr32; \
} while (0)
void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
unsigned long *ptr = gdb_regs;
int reg;
#ifdef CONFIG_SPE
union {
u32 v32[2];
u64 v64;
} acc;
#endif
for (reg = 0; reg < 32; reg++)
UNPACK64(regs->gpr[reg], ptr);
#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_SPE
for (reg = 0; reg < 32; reg++)
UNPACK64(current->thread.evr[reg], ptr);
#else
ptr += 32;
#endif
#else
/* fp registers not used by kernel, leave zero */
ptr += 32 * 8 / sizeof(int);
#endif
UNPACK64(regs->nip, ptr);
UNPACK64(regs->msr, ptr);
UNPACK32(regs->ccr, ptr);
UNPACK64(regs->link, ptr);
UNPACK64(regs->ctr, ptr);
UNPACK32(regs->xer, ptr);
BUG_ON((unsigned long)ptr >
(unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
}
/*
* This function does PowerPC specific procesing for interfacing to gdb.
*/
int kgdb_arch_handle_exception(int vector, int signo, int err_code,
char *remcom_in_buffer, char *remcom_out_buffer,
struct pt_regs *linux_regs)
{
char *ptr = &remcom_in_buffer[1];
unsigned long addr;
switch (remcom_in_buffer[0]) {
/*
* sAA..AA Step one instruction from AA..AA
* This will return an error to gdb ..
*/
case 's':
case 'c':
/* handle the optional parameter */
if (kgdb_hex2long(&ptr, &addr))
linux_regs->nip = addr;
atomic_set(&kgdb_cpu_doing_single_step, -1);
/* set the trace bit if we're stepping */
if (remcom_in_buffer[0] == 's') {
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
mtspr(SPRN_DBCR0,
mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
linux_regs->msr |= MSR_DE;
#else
linux_regs->msr |= MSR_SE;
#endif
kgdb_single_step = 1;
if (kgdb_contthread)
atomic_set(&kgdb_cpu_doing_single_step,
raw_smp_processor_id());
}
return 0;
}
return -1;
}
/*
* Global data
*/
struct kgdb_arch arch_kgdb_ops = {
.gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08},
};
static int kgdb_not_implemented(struct pt_regs *regs)
{
return 0;
}
static void *old__debugger_ipi;
static void *old__debugger;
static void *old__debugger_bpt;
static void *old__debugger_sstep;
static void *old__debugger_iabr_match;
static void *old__debugger_dabr_match;
static void *old__debugger_fault_handler;
int kgdb_arch_init(void)
{
old__debugger_ipi = __debugger_ipi;
old__debugger = __debugger;
old__debugger_bpt = __debugger_bpt;
old__debugger_sstep = __debugger_sstep;
old__debugger_iabr_match = __debugger_iabr_match;
old__debugger_dabr_match = __debugger_dabr_match;
old__debugger_fault_handler = __debugger_fault_handler;
__debugger_ipi = kgdb_call_nmi_hook;
__debugger = kgdb_debugger;
__debugger_bpt = kgdb_handle_breakpoint;
__debugger_sstep = kgdb_singlestep;
__debugger_iabr_match = kgdb_iabr_match;
__debugger_dabr_match = kgdb_dabr_match;
__debugger_fault_handler = kgdb_not_implemented;
return 0;
}
void kgdb_arch_exit(void)
{
__debugger_ipi = old__debugger_ipi;
__debugger = old__debugger;
__debugger_bpt = old__debugger_bpt;
__debugger_sstep = old__debugger_sstep;
__debugger_iabr_match = old__debugger_iabr_match;
__debugger_dabr_match = old__debugger_dabr_match;
__debugger_fault_handler = old__debugger_fault_handler;
}
......@@ -43,10 +43,6 @@
#define DBG(fmt...)
#if defined CONFIG_KGDB
#include <asm/kgdb.h>
#endif
extern void bootx_init(unsigned long r4, unsigned long phys);
int boot_cpuid;
......@@ -302,18 +298,6 @@ void __init setup_arch(char **cmdline_p)
xmon_setup();
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
ppc_md.kgdb_map_scc();
set_debug_traps();
if (strstr(cmd_line, "gdb")) {
if (ppc_md.progress)
ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
printk("kgdb breakpoint activated\n");
breakpoint();
}
#endif
/*
* Set cache line size based on type of cpu as a default.
* Systems with OF can look in the properties on the cpu node(s)
......
......@@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md;
int sccdbg;
#endif
extern void zs_kgdb_hook(int tty_num);
sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
EXPORT_SYMBOL(sys_ctrler);
......@@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void)
l2cr_init();
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_KGDB
zs_kgdb_hook(0);
#endif
find_via_cuda();
find_via_pmu();
smu_init();
......
......@@ -201,6 +201,10 @@ static void cpm_uart_int_tx(struct uart_port *port)
cpm_uart_tx_pump(port);
}
#ifdef CONFIG_CONSOLE_POLL
static int serial_polled;
#endif
/*
* Receive characters
*/
......@@ -222,6 +226,12 @@ static void cpm_uart_int_rx(struct uart_port *port)
*/
bdp = pinfo->rx_cur;
for (;;) {
#ifdef CONFIG_CONSOLE_POLL
if (unlikely(serial_polled)) {
serial_polled = 0;
return;
}
#endif
/* get status */
status = in_be16(&bdp->cbd_sc);
/* If this one is empty, return happy */
......@@ -253,7 +263,12 @@ static void cpm_uart_int_rx(struct uart_port *port)
goto handle_error;
if (uart_handle_sysrq_char(port, ch))
continue;
#ifdef CONFIG_CONSOLE_POLL
if (unlikely(serial_polled)) {
serial_polled = 0;
return;
}
#endif
error_return:
tty_insert_flip_char(tty, ch, flg);
......@@ -865,6 +880,80 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
cpm_uart_request_port(port);
}
}
#ifdef CONFIG_CONSOLE_POLL
/* Serial polling routines for writing and reading from the uart while
* in an interrupt or debug context.
*/
#define GDB_BUF_SIZE 512 /* power of 2, please */
static char poll_buf[GDB_BUF_SIZE];
static char *pollp;
static int poll_chars;
static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo)
{
u_char c, *cp;
volatile cbd_t *bdp;
int i;
/* Get the address of the host memory buffer.
*/
bdp = pinfo->rx_cur;
while (bdp->cbd_sc & BD_SC_EMPTY)
;
/* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
if (obuf) {
i = c = bdp->cbd_datlen;
while (i-- > 0)
*obuf++ = *cp++;
} else
c = *cp;
bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
bdp->cbd_sc |= BD_SC_EMPTY;
if (bdp->cbd_sc & BD_SC_WRAP)
bdp = pinfo->rx_bd_base;
else
bdp++;
pinfo->rx_cur = (cbd_t *)bdp;
return (int)c;
}
static int cpm_get_poll_char(struct uart_port *port)
{
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
if (!serial_polled) {
serial_polled = 1;
poll_chars = 0;
}
if (poll_chars <= 0) {
poll_chars = poll_wait_key(poll_buf, pinfo);
pollp = poll_buf;
}
poll_chars--;
return *pollp++;
}
static void cpm_put_poll_char(struct uart_port *port,
unsigned char c)
{
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
static char ch[2];
ch[0] = (char)c;
cpm_uart_early_write(pinfo->port.line, ch, 1);
}
#endif /* CONFIG_CONSOLE_POLL */
static struct uart_ops cpm_uart_pops = {
.tx_empty = cpm_uart_tx_empty,
.set_mctrl = cpm_uart_set_mctrl,
......@@ -882,6 +971,10 @@ static struct uart_ops cpm_uart_pops = {
.request_port = cpm_uart_request_port,
.config_port = cpm_uart_config_port,
.verify_port = cpm_uart_verify_port,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = cpm_get_poll_char,
.poll_put_char = cpm_put_poll_char,
#endif
};
struct uart_cpm_port cpm_uart_ports[UART_NR];
......
......@@ -921,6 +921,10 @@ static int mpsc_make_ready(struct mpsc_port_info *pi)
return 0;
}
#ifdef CONFIG_CONSOLE_POLL
static int serial_polled;
#endif
/*
******************************************************************************
*
......@@ -956,7 +960,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
while (!((cmdstat = be32_to_cpu(rxre->cmdstat))
& SDMA_DESC_CMDSTAT_O)) {
bytes_in = be16_to_cpu(rxre->bytecnt);
#ifdef CONFIG_CONSOLE_POLL
if (unlikely(serial_polled)) {
serial_polled = 0;
return 0;
}
#endif
/* Following use of tty struct directly is deprecated */
if (unlikely(tty_buffer_request_room(tty, bytes_in)
< bytes_in)) {
......@@ -1017,6 +1026,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
if (uart_handle_sysrq_char(&pi->port, *bp)) {
bp++;
bytes_in--;
#ifdef CONFIG_CONSOLE_POLL
if (unlikely(serial_polled)) {
serial_polled = 0;
return 0;
}
#endif
goto next_frame;
}
......@@ -1519,6 +1534,133 @@ static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
return rc;
}
#ifdef CONFIG_CONSOLE_POLL
/* Serial polling routines for writing and reading from the uart while
* in an interrupt or debug context.
*/
static char poll_buf[2048];
static int poll_ptr;
static int poll_cnt;
static void mpsc_put_poll_char(struct uart_port *port,
unsigned char c);
static int mpsc_get_poll_char(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
struct mpsc_rx_desc *rxre;
u32 cmdstat, bytes_in, i;
u8 *bp;
if (!serial_polled)
serial_polled = 1;
pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
if (poll_cnt) {
poll_cnt--;
return poll_buf[poll_ptr++];
}
poll_ptr = 0;
poll_cnt = 0;
while (poll_cnt == 0) {
rxre = (struct mpsc_rx_desc *)(pi->rxr +
(pi->rxr_posn*MPSC_RXRE_SIZE));
dma_cache_sync(pi->port.dev, (void *)rxre,
MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)rxre,
(ulong)rxre + MPSC_RXRE_SIZE);
#endif
/*
* Loop through Rx descriptors handling ones that have
* been completed.
*/
while (poll_cnt == 0 &&
!((cmdstat = be32_to_cpu(rxre->cmdstat)) &
SDMA_DESC_CMDSTAT_O)){
bytes_in = be16_to_cpu(rxre->bytecnt);
bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
dma_cache_sync(pi->port.dev, (void *) bp,
MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)bp,
(ulong)bp + MPSC_RXBE_SIZE);
#endif
if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
!(cmdstat & pi->port.ignore_status_mask)) {
poll_buf[poll_cnt] = *bp;
poll_cnt++;
} else {
for (i = 0; i < bytes_in; i++) {
poll_buf[poll_cnt] = *bp++;
poll_cnt++;
}
pi->port.icount.rx += bytes_in;
}
rxre->bytecnt = cpu_to_be16(0);
wmb();
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
SDMA_DESC_CMDSTAT_EI |
SDMA_DESC_CMDSTAT_F |
SDMA_DESC_CMDSTAT_L);
wmb();
dma_cache_sync(pi->port.dev, (void *)rxre,
MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
flush_dcache_range((ulong)rxre,
(ulong)rxre + MPSC_RXRE_SIZE);
#endif
/* Advance to next descriptor */
pi->rxr_posn = (pi->rxr_posn + 1) &
(MPSC_RXR_ENTRIES - 1);
rxre = (struct mpsc_rx_desc *)(pi->rxr +
(pi->rxr_posn * MPSC_RXRE_SIZE));
dma_cache_sync(pi->port.dev, (void *)rxre,
MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)rxre,
(ulong)rxre + MPSC_RXRE_SIZE);
#endif
}
/* Restart rx engine, if its stopped */
if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
mpsc_start_rx(pi);
}
if (poll_cnt) {
poll_cnt--;
return poll_buf[poll_ptr++];
}
return 0;
}
static void mpsc_put_poll_char(struct uart_port *port,
unsigned char c)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
u32 data;
data = readl(pi->mpsc_base + MPSC_MPCR);
writeb(c, pi->mpsc_base + MPSC_CHR_1);
mb();
data = readl(pi->mpsc_base + MPSC_CHR_2);
data |= MPSC_CHR_2_TTCS;
writel(data, pi->mpsc_base + MPSC_CHR_2);
mb();
while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS);
}
#endif
static struct uart_ops mpsc_pops = {
.tx_empty = mpsc_tx_empty,
......@@ -1537,6 +1679,10 @@ static struct uart_ops mpsc_pops = {
.request_port = mpsc_request_port,
.config_port = mpsc_config_port,
.verify_port = mpsc_verify_port,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = mpsc_get_poll_char,
.poll_put_char = mpsc_put_poll_char,
#endif
};
/*
......
/*
* ARM KGDB support
*
* Author: Deepak Saxena <dsaxena@mvista.com>
*
* Copyright (C) 2002 MontaVista Software Inc.
*
*/
#ifndef __ARM_KGDB_H__
#define __ARM_KGDB_H__
#include <linux/ptrace.h>
/*
* GDB assumes that we're a user process being debugged, so
* it will send us an SWI command to write into memory as the
* debug trap. When an SWI occurs, the next instruction addr is
* placed into R14_svc before jumping to the vector trap.
* This doesn't work for kernel debugging as we are already in SVC
* we would loose the kernel's LR, which is a bad thing. This
* is bad thing.
*
* By doing this as an undefined instruction trap, we force a mode
* switch from SVC to UND mode, allowing us to save full kernel state.
*
* We also define a KGDB_COMPILED_BREAK which can be used to compile
* in breakpoints. This is important for things like sysrq-G and for
* the initial breakpoint from trap_init().
*
* Note to ARM HW designers: Add real trap support like SH && PPC to
* make our lives much much simpler. :)
*/
#define BREAK_INSTR_SIZE 4
#define GDB_BREAKINST 0xef9f0001
#define KGDB_BREAKINST 0xe7ffdefe
#define KGDB_COMPILED_BREAK 0xe7ffdeff
#define CACHE_FLUSH_IS_SAFE 1
#ifndef __ASSEMBLY__
static inline void arch_kgdb_breakpoint(void)
{
asm(".word 0xe7ffdeff");
}
extern void kgdb_handle_bus_error(void);
extern int kgdb_fault_expected;
#endif /* !__ASSEMBLY__ */
/*
* From Kevin Hilman:
*
* gdb is expecting the following registers layout.
*
* r0-r15: 1 long word each
* f0-f7: unused, 3 long words each !!
* fps: unused, 1 long word
* cpsr: 1 long word
*
* Even though f0-f7 and fps are not used, they need to be
* present in the registers sent for correct processing in
* the host-side gdb.
*
* In particular, it is crucial that CPSR is in the right place,
* otherwise gdb will not be able to correctly interpret stepping over
* conditional branches.
*/
#define _GP_REGS 16
#define _FP_REGS 8
#define _EXTRA_REGS 2
#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
#define KGDB_MAX_NO_CPUS 1
#define BUFMAX 400
#define NUMREGBYTES (GDB_MAX_REGS << 2)
#define NUMCRITREGBYTES (32 << 2)
#define _R0 0
#define _R1 1
#define _R2 2
#define _R3 3
#define _R4 4
#define _R5 5
#define _R6 6
#define _R7 7
#define _R8 8
#define _R9 9
#define _R10 10
#define _FP 11
#define _IP 12
#define _SPT 13
#define _LR 14
#define _PC 15
#define _CPSR (GDB_MAX_REGS - 1)
/*
* So that we can denote the end of a frame for tracing,
* in the simple case:
*/
#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func)
#endif /* __ASM_KGDB_H__ */
......@@ -24,4 +24,6 @@ static inline int in_exception_text(unsigned long ptr)
ptr < (unsigned long)&__exception_text_end;
}
extern void __init early_trap_init(void);
#endif
/*
* kgdb.h: Defines and declarations for serial line source level
* remote debugging of the Linux kernel using gdb.
* include/asm-powerpc/kgdb.h
*
* The PowerPC (32/64) specific defines / externs for KGDB. Based on
* the previous 32bit and 64bit specific files, which had the following
* copyrights:
*
* PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
* PPC Mods (C) 2004 Tom Rini (trini@mvista.com)
* PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com)
* PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
*
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Author: Tom Rini <trini@kernel.crashing.org>
*
* 2006 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifdef __KERNEL__
#ifndef _PPC_KGDB_H
#define _PPC_KGDB_H
#ifndef __POWERPC_KGDB_H__
#define __POWERPC_KGDB_H__
#ifndef __ASSEMBLY__
/* Things specific to the gen550 backend. */
struct uart_port;
extern void gen550_progress(char *, unsigned short);
extern void gen550_kgdb_map_scc(void);
extern void gen550_init(int, struct uart_port *);
/* Things specific to the pmac backend. */
extern void zs_kgdb_hook(int tty_num);
/* To init the kgdb engine. (called by serial hook)*/
extern void set_debug_traps(void);
/* To enter the debugger explicitly. */
extern void breakpoint(void);
/* For taking exceptions
* these are defined in traps.c
*/
extern int (*debugger)(struct pt_regs *regs);
extern int (*debugger_bpt)(struct pt_regs *regs);
extern int (*debugger_sstep)(struct pt_regs *regs);
extern int (*debugger_iabr_match)(struct pt_regs *regs);
extern int (*debugger_dabr_match)(struct pt_regs *regs);
extern void (*debugger_fault_handler)(struct pt_regs *regs);
/* What we bring to the party */
int kgdb_bpt(struct pt_regs *regs);
int kgdb_sstep(struct pt_regs *regs);
void kgdb(struct pt_regs *regs);
int kgdb_iabr_match(struct pt_regs *regs);
int kgdb_dabr_match(struct pt_regs *regs);
#define BREAK_INSTR_SIZE 4
#define BUFMAX ((NUMREGBYTES * 2) + 512)
#define OUTBUFMAX ((NUMREGBYTES * 2) + 512)
static inline void arch_kgdb_breakpoint(void)
{
asm(".long 0x7d821008"); /* twge r2, r2 */
}
#define CACHE_FLUSH_IS_SAFE 1
/* The number bytes of registers we have to save depends on a few
* things. For 64bit we default to not including vector registers and
* vector state registers. */
#ifdef CONFIG_PPC64
/*
* external low-level support routines (ie macserial.c)
* 64 bit (8 byte) registers:
* 32 gpr, 32 fpr, nip, msr, link, ctr
* 32 bit (4 byte) registers:
* ccr, xer, fpscr
*/
extern void kgdb_interruptible(int); /* control interrupts from serial */
extern void putDebugChar(char); /* write a single character */
extern char getDebugChar(void); /* read and return a single char */
#define NUMREGBYTES ((68 * 8) + (3 * 4))
#define NUMCRITREGBYTES 184
#else /* CONFIG_PPC32 */
/* On non-E500 family PPC32 we determine the size by picking the last
* register we need, but on E500 we skip sections so we list what we
* need to store, and add it up. */
#ifndef CONFIG_E500
#define MAXREG (PT_FPSCR+1)
#else
/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
#define MAXREG ((32*2)+6+2+1)
#endif
#define NUMREGBYTES (MAXREG * sizeof(int))
/* CR/LR, R1, R2, R13-R31 inclusive. */
#define NUMCRITREGBYTES (23 * sizeof(int))
#endif /* 32/64 */
#endif /* !(__ASSEMBLY__) */
#endif /* !(_PPC_KGDB_H) */
#endif /* !__POWERPC_KGDB_H__ */
#endif /* __KERNEL__ */
config HAVE_ARCH_KGDB_SHADOW_INFO
bool
config HAVE_ARCH_KGDB
bool
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册