From 0dae88392395e228e67436cd08f084d395b39df5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 15 Dec 2012 08:29:12 -0300 Subject: [PATCH] [media] em28xx: add support for RC6 mode 0 on devices that support it Newer em28xx chipsets (em2874 and upper) are capable of supporting RC6 codes, on both mode 0 (command mode, 16 bits payload size, similar to RC5, also called "Philips mode") and mode 6a (OEM command mode, with offers a few alternatives with regards to the payload size). I don't have any mode 6a control ATM to test it, so, I opted to add support only to mode 0. After this patch, adding support to mode 6a should not be hard. Tested with a Philips television remote controller. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/em28xx/em28xx-input.c | 93 ++++++++++++++++++++----- 1 file changed, 76 insertions(+), 17 deletions(-) diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c index 507370c5217d..3899ea823336 100644 --- a/drivers/media/usb/em28xx/em28xx-input.c +++ b/drivers/media/usb/em28xx/em28xx-input.c @@ -285,6 +285,9 @@ static int em2874_polling_getkey(struct em28xx_IR *ir, else /* Normal NEC */ poll_result->scancode = msg[1] << 8 | msg[3]; break; + case RC_BIT_RC6_0: + poll_result->scancode = msg[1] << 8 | msg[2]; + break; default: poll_result->scancode = (msg[1] << 24) | (msg[2] << 16) | (msg[3] << 8) | msg[4]; @@ -361,15 +364,42 @@ static void em28xx_ir_stop(struct rc_dev *rc) cancel_delayed_work_sync(&ir->work); } -static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type) +static int em2860_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type) { - int rc = 0; struct em28xx_IR *ir = rc_dev->priv; struct em28xx *dev = ir->dev; - u8 ir_config = EM2874_IR_RC5; - /* Adjust xclk based o IR table for RC5/NEC tables */ + /* Adjust xclk based on IR table for RC5/NEC tables */ + if (*rc_type & RC_BIT_RC5) { + dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE; + ir->full_code = 1; + *rc_type = RC_BIT_RC5; + } else if (*rc_type & RC_BIT_NEC) { + dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE; + ir->full_code = 1; + *rc_type = RC_BIT_NEC; + } else if (*rc_type & RC_BIT_UNKNOWN) { + *rc_type = RC_BIT_UNKNOWN; + } else { + *rc_type = ir->rc_type; + return -EINVAL; + } + ir->get_key = default_polling_getkey; + em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk, + EM28XX_XCLK_IR_RC5_MODE); + + ir->rc_type = *rc_type; + return 0; +} + +static int em2874_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type) +{ + struct em28xx_IR *ir = rc_dev->priv; + struct em28xx *dev = ir->dev; + u8 ir_config = EM2874_IR_RC5; + + /* Adjust xclk and set type based on IR table for RC5/NEC/RC6 tables */ if (*rc_type & RC_BIT_RC5) { dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE; ir->full_code = 1; @@ -379,33 +409,47 @@ static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type) ir_config = EM2874_IR_NEC | EM2874_IR_NEC_NO_PARITY; ir->full_code = 1; *rc_type = RC_BIT_NEC; - } else if (*rc_type != RC_BIT_UNKNOWN) - rc = -EINVAL; + } else if (*rc_type & RC_BIT_RC6_0) { + dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE; + ir_config = EM2874_IR_RC6_MODE_0; + ir->full_code = 1; + *rc_type = RC_BIT_RC6_0; + } else if (*rc_type & RC_BIT_UNKNOWN) { + *rc_type = RC_BIT_UNKNOWN; + } else { + *rc_type = ir->rc_type; + return -EINVAL; + } - ir->rc_type = *rc_type; + ir->get_key = em2874_polling_getkey; + em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1); em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk, EM28XX_XCLK_IR_RC5_MODE); + ir->rc_type = *rc_type; + + return 0; +} +static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type) +{ + struct em28xx_IR *ir = rc_dev->priv; + struct em28xx *dev = ir->dev; + /* Setup the proper handler based on the chip */ switch (dev->chip_id) { case CHIP_ID_EM2860: case CHIP_ID_EM2883: - ir->get_key = default_polling_getkey; - break; + return em2860_ir_change_protocol(rc_dev, rc_type); case CHIP_ID_EM2884: case CHIP_ID_EM2874: case CHIP_ID_EM28174: - ir->get_key = em2874_polling_getkey; - em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1); - break; + return em2874_ir_change_protocol(rc_dev, rc_type); default: printk("Unrecognized em28xx chip id 0x%02x: IR not supported\n", dev->chip_id); - rc = -EINVAL; + return -EINVAL; } - - return rc; } static void em28xx_register_i2c_ir(struct em28xx *dev) @@ -573,6 +617,21 @@ static int em28xx_ir_init(struct em28xx *dev) rc->open = em28xx_ir_start; rc->close = em28xx_ir_stop; + switch (dev->chip_id) { + case CHIP_ID_EM2860: + case CHIP_ID_EM2883: + rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC; + break; + case CHIP_ID_EM2884: + case CHIP_ID_EM2874: + case CHIP_ID_EM28174: + rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC | RC_BIT_RC6_0; + break; + default: + err = -ENODEV; + goto err_out_free; + } + /* By default, keep protocol field untouched */ rc_type = RC_BIT_UNKNOWN; err = em28xx_ir_change_protocol(rc, &rc_type); @@ -615,9 +674,9 @@ static int em28xx_ir_init(struct em28xx *dev) return 0; - err_out_stop: +err_out_stop: dev->ir = NULL; - err_out_free: +err_out_free: rc_free_device(rc); kfree(ir); return err; -- GitLab