From 0d5e74fc7f44b1cdcd793496877c67a2a7a32a1e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 22 Aug 2007 14:01:31 -0700 Subject: [PATCH] remove dead code in via-pmu68k When suspend is ever implemented for pmu68k it really should follow the generic pm_ops concept and not mirror the platform-specific /dev/pmu device with ioctls on it. Hence, this patch removes the unused code there; should the implementers need it they can look at via-pmu.c and/or the history of the file. Signed-off-by: Johannes Berg Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/via-pmu68k.c | 240 --------------------------------- 1 file changed, 240 deletions(-) diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c index dfdf11c1eec4..e2f84da09e7c 100644 --- a/drivers/macintosh/via-pmu68k.c +++ b/drivers/macintosh/via-pmu68k.c @@ -818,243 +818,3 @@ pmu_present(void) { return (pmu_kind != PMU_UNKNOWN); } - -#if 0 /* needs some work for 68K */ - -/* - * This struct is used to store config register values for - * PCI devices which may get powered off when we sleep. - */ -static struct pci_save { - u16 command; - u16 cache_lat; - u16 intr; -} *pbook_pci_saves; -static int n_pbook_pci_saves; - -static inline void -pbook_pci_save(void) -{ - int npci; - struct pci_dev *pd = NULL; - struct pci_save *ps; - - npci = 0; - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) - ++npci; - n_pbook_pci_saves = npci; - if (npci == 0) - return; - ps = kmalloc(npci * sizeof(*ps), GFP_KERNEL); - pbook_pci_saves = ps; - if (ps == NULL) - return; - - pd = NULL; - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) { - pci_read_config_word(pd, PCI_COMMAND, &ps->command); - pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat); - pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr); - ++ps; - --npci; - } -} - -static inline void -pbook_pci_restore(void) -{ - u16 cmd; - struct pci_save *ps = pbook_pci_saves; - struct pci_dev *pd = NULL; - int j; - - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) { - if (ps->command == 0) - continue; - pci_read_config_word(pd, PCI_COMMAND, &cmd); - if ((ps->command & ~cmd) == 0) - continue; - switch (pd->hdr_type) { - case PCI_HEADER_TYPE_NORMAL: - for (j = 0; j < 6; ++j) - pci_write_config_dword(pd, - PCI_BASE_ADDRESS_0 + j*4, - pd->resource[j].start); - pci_write_config_dword(pd, PCI_ROM_ADDRESS, - pd->resource[PCI_ROM_RESOURCE].start); - pci_write_config_word(pd, PCI_CACHE_LINE_SIZE, - ps->cache_lat); - pci_write_config_word(pd, PCI_INTERRUPT_LINE, - ps->intr); - pci_write_config_word(pd, PCI_COMMAND, ps->command); - break; - /* other header types not restored at present */ - } - } -} - -/* - * Put the powerbook to sleep. - */ -#define IRQ_ENABLE ((unsigned int *)0xf3000024) -#define MEM_CTRL ((unsigned int *)0xf8000070) - -int powerbook_sleep(void) -{ - int ret, i, x; - static int save_backlight; - static unsigned int save_irqen; - unsigned long msr; - unsigned int hid0; - unsigned long p, wait; - struct adb_request sleep_req; - - /* Notify device drivers */ - ret = blocking_notifier_call_chain(&sleep_notifier_list, - PBOOK_SLEEP, NULL); - if (ret & NOTIFY_STOP_MASK) - return -EBUSY; - - /* Sync the disks. */ - /* XXX It would be nice to have some way to ensure that - * nobody is dirtying any new buffers while we wait. */ - sys_sync(); - - /* Turn off the display backlight */ - save_backlight = backlight_enabled; - if (save_backlight) - pmu_enable_backlight(0); - - /* Give the disks a little time to actually finish writing */ - for (wait = jiffies + (HZ/4); time_before(jiffies, wait); ) - mb(); - - /* Disable all interrupts except pmu */ - save_irqen = in_le32(IRQ_ENABLE); - for (i = 0; i < 32; ++i) - if (i != vias->intrs[0].line && (save_irqen & (1 << i))) - disable_irq(i); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* Save the state of PCI config space for some slots */ - pbook_pci_save(); - - /* Set the memory controller to keep the memory refreshed - while we're asleep */ - for (i = 0x403f; i >= 0x4000; --i) { - out_be32(MEM_CTRL, i); - do { - x = (in_be32(MEM_CTRL) >> 16) & 0x3ff; - } while (x == 0); - if (x >= 0x100) - break; - } - - /* Ask the PMU to put us to sleep */ - pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T'); - while (!sleep_req.complete) - mb(); - /* displacement-flush the L2 cache - necessary? */ - for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000) - i = *(volatile int *)p; - asleep = 1; - - /* Put the CPU into sleep mode */ - asm volatile("mfspr %0,1008" : "=r" (hid0) :); - hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP; - asm volatile("mtspr 1008,%0" : : "r" (hid0)); - local_save_flags(msr); - msr |= MSR_POW | MSR_EE; - local_irq_restore(msr); - udelay(10); - - /* OK, we're awake again, start restoring things */ - out_be32(MEM_CTRL, 0x3f); - pbook_pci_restore(); - - /* wait for the PMU interrupt sequence to complete */ - while (asleep) - mb(); - - /* reenable interrupts */ - for (i = 0; i < 32; ++i) - if (i != vias->intrs[0].line && (save_irqen & (1 << i))) - enable_irq(i); - - /* Notify drivers */ - blocking_notifier_call_chain(&sleep_notifier_list, PBOOK_WAKE, NULL); - - /* reenable ADB autopoll */ - pmu_adb_autopoll(adb_dev_map); - - /* Turn on the screen backlight, if it was on before */ - if (save_backlight) - pmu_enable_backlight(1); - - /* Wait for the hard disk to spin up */ - - return 0; -} - -/* - * Support for /dev/pmu device - */ -static int pmu_open(struct inode *inode, struct file *file) -{ - return 0; -} - -static ssize_t pmu_read(struct file *file, char *buf, - size_t count, loff_t *ppos) -{ - return 0; -} - -static ssize_t pmu_write(struct file *file, const char *buf, - size_t count, loff_t *ppos) -{ - return 0; -} - -static int pmu_ioctl(struct inode * inode, struct file *filp, - u_int cmd, u_long arg) -{ - int error; - __u32 value; - - switch (cmd) { - case PMU_IOC_SLEEP: - return -ENOSYS; - case PMU_IOC_GET_BACKLIGHT: - return put_user(backlight_level, (__u32 *)arg); - case PMU_IOC_SET_BACKLIGHT: - error = get_user(value, (__u32 *)arg); - if (!error) - pmu_set_brightness(value); - return error; - case PMU_IOC_GET_MODEL: - return put_user(pmu_kind, (__u32 *)arg); - } - return -EINVAL; -} - -static const struct file_operations pmu_device_fops = { - .read = pmu_read, - .write = pmu_write, - .ioctl = pmu_ioctl, - .open = pmu_open, -}; - -static struct miscdevice pmu_device = { - PMU_MINOR, "pmu", &pmu_device_fops -}; - -void pmu_device_init(void) -{ - if (!via) - return; - if (misc_register(&pmu_device) < 0) - printk(KERN_ERR "via-pmu68k: cannot register misc device.\n"); -} -#endif /* CONFIG_PMAC_PBOOK */ - -- GitLab