e1000e: Add support for the next LOM generation

Add devices IDs for the next LOM generations that will be available on the
next Intel Client platforms.
This patch provides the initial support for these devices.
Signed-off-by: NSasha Neftin <sasha.neftin@intel.com>
Tested-by: NNaama Meir <naamax.meir@linux.intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -908,6 +908,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		mask |= BIT(18);
 		break;
 	default:
@@ -1575,6 +1576,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		fext_nvm11 = er32(FEXTNVM11);
 		fext_nvm11 &= ~E1000_FEXTNVM11_DISABLE_MULR_FIX;
 		ew32(FEXTNVM11, fext_nvm11);

drivers/net/ethernet/intel/e1000e/hw.h

@@ -114,6 +114,14 @@ struct e1000_hw;
 #define E1000_DEV_ID_PCH_LNP_I219_V20		0x550F
 #define E1000_DEV_ID_PCH_LNP_I219_LM21		0x5510
 #define E1000_DEV_ID_PCH_LNP_I219_V21		0x5511
+#define E1000_DEV_ID_PCH_ARL_I219_LM24		0x57A0
+#define E1000_DEV_ID_PCH_ARL_I219_V24		0x57A1
+#define E1000_DEV_ID_PCH_PTP_I219_LM25		0x57B3
+#define E1000_DEV_ID_PCH_PTP_I219_V25		0x57B4
+#define E1000_DEV_ID_PCH_PTP_I219_LM26		0x57B5
+#define E1000_DEV_ID_PCH_PTP_I219_V26		0x57B6
+#define E1000_DEV_ID_PCH_PTP_I219_LM27		0x57B7
+#define E1000_DEV_ID_PCH_PTP_I219_V27		0x57B8
 
 #define E1000_REVISION_4	4
 
@@ -141,6 +149,7 @@ enum e1000_mac_type {
 	e1000_pch_adp,
 	e1000_pch_mtp,
 	e1000_pch_lnp,
+	e1000_pch_ptp,
 };
 
 enum e1000_media_type {

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -322,6 +322,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		if (e1000_phy_is_accessible_pchlan(hw))
 			break;
 
@@ -468,6 +469,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		case e1000_pch_adp:
 		case e1000_pch_mtp:
 		case e1000_pch_lnp:
+		case e1000_pch_ptp:
 			/* In case the PHY needs to be in mdio slow mode,
 			 * set slow mode and try to get the PHY id again.
 			 */
@@ -714,6 +716,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 	case e1000_pchlan:
 		/* check management mode */
 		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
@@ -1681,6 +1684,7 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		rc = e1000_init_phy_params_pchlan(hw);
 		break;
 	default:
@@ -2137,6 +2141,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
 		break;
 	default:
@@ -3182,6 +3187,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		bank1_offset = nvm->flash_bank_size;
 		act_offset = E1000_ICH_NVM_SIG_WORD;
 
@@ -4122,6 +4128,7 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		word = NVM_COMPAT;
 		valid_csum_mask = NVM_COMPAT_VALID_CSUM;
 		break;

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -3553,6 +3553,7 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
 			/* Stable 24MHz frequency */
 			incperiod = INCPERIOD_24MHZ;
@@ -4068,6 +4069,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		fc->refresh_time = 0xFFFF;
 		fc->pause_time = 0xFFFF;
 
@@ -7914,6 +7916,14 @@ static const struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V20), board_pch_mtp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM21), board_pch_mtp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V21), board_pch_mtp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ARL_I219_LM24), board_pch_mtp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ARL_I219_V24), board_pch_mtp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_LM25), board_pch_mtp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_V25), board_pch_mtp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_LM26), board_pch_mtp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_V26), board_pch_mtp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_LM27), board_pch_mtp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_V27), board_pch_mtp },
 
 	{ 0, 0, 0, 0, 0, 0, 0 }	/* terminate list */
 };

drivers/net/ethernet/intel/e1000e/ptp.c

@@ -287,6 +287,7 @@ void e1000e_ptp_init(struct e1000_adapter *adapter)
 	case e1000_pch_adp:
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
+	case e1000_pch_ptp:
 		if ((hw->mac.type < e1000_pch_lpt) ||
 		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
 			adapter->ptp_clock_info.max_adj = 24000000 - 1;