diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig index 866067789330ad4f4eaf0cebd7f807aa9403d1ec..7438fbeef744d8dd6d237650b81ac48b5bc3e969 100644 --- a/drivers/net/wireless/intel/iwlwifi/Kconfig +++ b/drivers/net/wireless/intel/iwlwifi/Kconfig @@ -53,7 +53,6 @@ config IWLWIFI_LEDS config IWLDVM tristate "Intel Wireless WiFi DVM Firmware support" - depends on m help This is the driver that supports the DVM firmware. The list of the devices that use this firmware is available here: diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c index c84a0299d43e0f12b3ad80128eea8838cb2bb2ff..bce9b3420a13529926d3919fb7f14fddca559ef6 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c @@ -7,6 +7,7 @@ * * Copyright(c) 2014 Intel Corporation. All rights reserved. * Copyright(c) 2014 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -70,12 +71,15 @@ /* Highest firmware API version supported */ #define IWL8000_UCODE_API_MAX 20 +#define IWL8265_UCODE_API_MAX 20 /* Oldest version we won't warn about */ #define IWL8000_UCODE_API_OK 13 +#define IWL8265_UCODE_API_OK 20 /* Lowest firmware API version supported */ #define IWL8000_UCODE_API_MIN 13 +#define IWL8265_UCODE_API_MIN 20 /* NVM versions */ #define IWL8000_NVM_VERSION 0x0a1d @@ -93,6 +97,10 @@ #define IWL8000_MODULE_FIRMWARE(api) \ IWL8000_FW_PRE "-" __stringify(api) ".ucode" +#define IWL8265_FW_PRE "iwlwifi-8265-" +#define IWL8265_MODULE_FIRMWARE(api) \ + IWL8265_FW_PRE __stringify(api) ".ucode" + #define NVM_HW_SECTION_NUM_FAMILY_8000 10 #define DEFAULT_NVM_FILE_FAMILY_8000B "nvmData-8000B" #define DEFAULT_NVM_FILE_FAMILY_8000C "nvmData-8000C" @@ -144,10 +152,7 @@ static const struct iwl_tt_params iwl8000_tt_params = { .support_tx_backoff = true, }; -#define IWL_DEVICE_8000 \ - .ucode_api_max = IWL8000_UCODE_API_MAX, \ - .ucode_api_ok = IWL8000_UCODE_API_OK, \ - .ucode_api_min = IWL8000_UCODE_API_MIN, \ +#define IWL_DEVICE_8000_COMMON \ .device_family = IWL_DEVICE_FAMILY_8000, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -167,10 +172,28 @@ static const struct iwl_tt_params iwl8000_tt_params = { .thermal_params = &iwl8000_tt_params, \ .apmg_not_supported = true +#define IWL_DEVICE_8000 \ + IWL_DEVICE_8000_COMMON, \ + .ucode_api_max = IWL8000_UCODE_API_MAX, \ + .ucode_api_ok = IWL8000_UCODE_API_OK, \ + .ucode_api_min = IWL8000_UCODE_API_MIN \ + +#define IWL_DEVICE_8260 \ + IWL_DEVICE_8000_COMMON, \ + .ucode_api_max = IWL8000_UCODE_API_MAX, \ + .ucode_api_ok = IWL8000_UCODE_API_OK, \ + .ucode_api_min = IWL8000_UCODE_API_MIN \ + +#define IWL_DEVICE_8265 \ + IWL_DEVICE_8000_COMMON, \ + .ucode_api_max = IWL8265_UCODE_API_MAX, \ + .ucode_api_ok = IWL8265_UCODE_API_OK, \ + .ucode_api_min = IWL8265_UCODE_API_MIN \ + const struct iwl_cfg iwl8260_2n_cfg = { .name = "Intel(R) Dual Band Wireless N 8260", .fw_name_pre = IWL8000_FW_PRE, - IWL_DEVICE_8000, + IWL_DEVICE_8260, .ht_params = &iwl8000_ht_params, .nvm_ver = IWL8000_NVM_VERSION, .nvm_calib_ver = IWL8000_TX_POWER_VERSION, @@ -179,7 +202,7 @@ const struct iwl_cfg iwl8260_2n_cfg = { const struct iwl_cfg iwl8260_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 8260", .fw_name_pre = IWL8000_FW_PRE, - IWL_DEVICE_8000, + IWL_DEVICE_8260, .ht_params = &iwl8000_ht_params, .nvm_ver = IWL8000_NVM_VERSION, .nvm_calib_ver = IWL8000_TX_POWER_VERSION, @@ -188,8 +211,8 @@ const struct iwl_cfg iwl8260_2ac_cfg = { const struct iwl_cfg iwl8265_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 8265", - .fw_name_pre = IWL8000_FW_PRE, - IWL_DEVICE_8000, + .fw_name_pre = IWL8265_FW_PRE, + IWL_DEVICE_8265, .ht_params = &iwl8000_ht_params, .nvm_ver = IWL8000_NVM_VERSION, .nvm_calib_ver = IWL8000_TX_POWER_VERSION, @@ -209,7 +232,7 @@ const struct iwl_cfg iwl4165_2ac_cfg = { const struct iwl_cfg iwl8260_2ac_sdio_cfg = { .name = "Intel(R) Dual Band Wireless-AC 8260", .fw_name_pre = IWL8000_FW_PRE, - IWL_DEVICE_8000, + IWL_DEVICE_8260, .ht_params = &iwl8000_ht_params, .nvm_ver = IWL8000_NVM_VERSION, .nvm_calib_ver = IWL8000_TX_POWER_VERSION, @@ -236,3 +259,4 @@ const struct iwl_cfg iwl4165_2ac_sdio_cfg = { }; MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL8265_MODULE_FIRMWARE(IWL8265_UCODE_API_OK)); diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index 7acb49075683c115d602b20619eb03700718123f..ab4c2a0470b264cc9da8623c0f7bb198563c6e28 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -243,8 +243,10 @@ static int iwl_request_firmware(struct iwl_drv *drv, bool first) if (drv->trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) { char rev_step = 'A' + CSR_HW_REV_STEP(drv->trans->hw_rev); - snprintf(drv->firmware_name, sizeof(drv->firmware_name), - "%s%c-%s.ucode", name_pre, rev_step, tag); + if (rev_step != 'A') + snprintf(drv->firmware_name, + sizeof(drv->firmware_name), "%s%c-%s.ucode", + name_pre, rev_step, tag); } IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n", diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index 9a15642f80dd28b88dc4ae8326f465a7ec583e35..ea1e177c2ea101463a43a1c73b7dfb995dc9b135 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1298,6 +1298,10 @@ int iwl_mvm_sched_scan_start(struct iwl_mvm *mvm, return -EBUSY; } + /* we don't support "match all" in the firmware */ + if (!req->n_match_sets) + return -EOPNOTSUPP; + ret = iwl_mvm_check_running_scans(mvm, type); if (ret) return ret; diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h index cc3888e2700daf1cfe07ebb4e003ca53bcf6d934..73c95594eabe2c530d503fa51aedce05f0ffb8a9 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h @@ -490,6 +490,15 @@ static inline void iwl_enable_interrupts(struct iwl_trans *trans) iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask); } +static inline void iwl_enable_fw_load_int(struct iwl_trans *trans) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + + IWL_DEBUG_ISR(trans, "Enabling FW load interrupt\n"); + trans_pcie->inta_mask = CSR_INT_BIT_FH_TX; + iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask); +} + static inline void iwl_enable_rfkill_int(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c index ccafbd8cf4b3b224649b3fbc87da69207884743c..152cf9ad9566587320a4a8d5dd34140b3d6b24b9 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c @@ -1438,9 +1438,11 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) inta & ~trans_pcie->inta_mask); } - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &trans->status)) + /* we are loading the firmware, enable FH_TX interrupt only */ + if (handled & CSR_INT_BIT_FH_TX) + iwl_enable_fw_load_int(trans); + /* only Re-enable all interrupt if disabled by irq */ + else if (test_bit(STATUS_INT_ENABLED, &trans->status)) iwl_enable_interrupts(trans); /* Re-enable RF_KILL if it occurred */ else if (handled & CSR_INT_BIT_RF_KILL) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index d60a467a983c6f220384b701953eb42d2cc4c1ae..5a854c60947749cc6dd9dfd90ec90ed9b20667c0 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -1021,82 +1021,6 @@ static int iwl_pcie_load_given_ucode_8000(struct iwl_trans *trans, &first_ucode_section); } -static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, - const struct fw_img *fw, bool run_in_rfkill) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - bool hw_rfkill; - int ret; - - mutex_lock(&trans_pcie->mutex); - - /* Someone called stop_device, don't try to start_fw */ - if (trans_pcie->is_down) { - IWL_WARN(trans, - "Can't start_fw since the HW hasn't been started\n"); - ret = EIO; - goto out; - } - - /* This may fail if AMT took ownership of the device */ - if (iwl_pcie_prepare_card_hw(trans)) { - IWL_WARN(trans, "Exit HW not ready\n"); - ret = -EIO; - goto out; - } - - iwl_enable_rfkill_int(trans); - - /* If platform's RF_KILL switch is NOT set to KILL */ - hw_rfkill = iwl_is_rfkill_set(trans); - if (hw_rfkill) - set_bit(STATUS_RFKILL, &trans->status); - else - clear_bit(STATUS_RFKILL, &trans->status); - iwl_trans_pcie_rf_kill(trans, hw_rfkill); - if (hw_rfkill && !run_in_rfkill) { - ret = -ERFKILL; - goto out; - } - - iwl_write32(trans, CSR_INT, 0xFFFFFFFF); - - ret = iwl_pcie_nic_init(trans); - if (ret) { - IWL_ERR(trans, "Unable to init nic\n"); - goto out; - } - - /* make sure rfkill handshake bits are cleared */ - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - iwl_write32(trans, CSR_INT, 0xFFFFFFFF); - iwl_enable_interrupts(trans); - - /* really make sure rfkill handshake bits are cleared */ - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Load the given image to the HW */ - if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) - ret = iwl_pcie_load_given_ucode_8000(trans, fw); - else - ret = iwl_pcie_load_given_ucode(trans, fw); - -out: - mutex_unlock(&trans_pcie->mutex); - return ret; -} - -static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr) -{ - iwl_pcie_reset_ict(trans); - iwl_pcie_tx_start(trans, scd_addr); -} - static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); @@ -1127,7 +1051,8 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) * already dead. */ if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) { - IWL_DEBUG_INFO(trans, "DEVICE_ENABLED bit was set and is now cleared\n"); + IWL_DEBUG_INFO(trans, + "DEVICE_ENABLED bit was set and is now cleared\n"); iwl_pcie_tx_stop(trans); iwl_pcie_rx_stop(trans); @@ -1161,7 +1086,6 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) iwl_disable_interrupts(trans); spin_unlock(&trans_pcie->irq_lock); - /* clear all status bits */ clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status); clear_bit(STATUS_INT_ENABLED, &trans->status); @@ -1194,10 +1118,116 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) if (hw_rfkill != was_hw_rfkill) iwl_trans_pcie_rf_kill(trans, hw_rfkill); - /* re-take ownership to prevent other users from stealing the deivce */ + /* re-take ownership to prevent other users from stealing the device */ iwl_pcie_prepare_card_hw(trans); } +static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, + const struct fw_img *fw, bool run_in_rfkill) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + bool hw_rfkill; + int ret; + + /* This may fail if AMT took ownership of the device */ + if (iwl_pcie_prepare_card_hw(trans)) { + IWL_WARN(trans, "Exit HW not ready\n"); + ret = -EIO; + goto out; + } + + iwl_enable_rfkill_int(trans); + + iwl_write32(trans, CSR_INT, 0xFFFFFFFF); + + /* + * We enabled the RF-Kill interrupt and the handler may very + * well be running. Disable the interrupts to make sure no other + * interrupt can be fired. + */ + iwl_disable_interrupts(trans); + + /* Make sure it finished running */ + synchronize_irq(trans_pcie->pci_dev->irq); + + mutex_lock(&trans_pcie->mutex); + + /* If platform's RF_KILL switch is NOT set to KILL */ + hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans->status); + else + clear_bit(STATUS_RFKILL, &trans->status); + iwl_trans_pcie_rf_kill(trans, hw_rfkill); + if (hw_rfkill && !run_in_rfkill) { + ret = -ERFKILL; + goto out; + } + + /* Someone called stop_device, don't try to start_fw */ + if (trans_pcie->is_down) { + IWL_WARN(trans, + "Can't start_fw since the HW hasn't been started\n"); + ret = -EIO; + goto out; + } + + /* make sure rfkill handshake bits are cleared */ + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + /* clear (again), then enable host interrupts */ + iwl_write32(trans, CSR_INT, 0xFFFFFFFF); + + ret = iwl_pcie_nic_init(trans); + if (ret) { + IWL_ERR(trans, "Unable to init nic\n"); + goto out; + } + + /* + * Now, we load the firmware and don't want to be interrupted, even + * by the RF-Kill interrupt (hence mask all the interrupt besides the + * FH_TX interrupt which is needed to load the firmware). If the + * RF-Kill switch is toggled, we will find out after having loaded + * the firmware and return the proper value to the caller. + */ + iwl_enable_fw_load_int(trans); + + /* really make sure rfkill handshake bits are cleared */ + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + + /* Load the given image to the HW */ + if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) + ret = iwl_pcie_load_given_ucode_8000(trans, fw); + else + ret = iwl_pcie_load_given_ucode(trans, fw); + iwl_enable_interrupts(trans); + + /* re-check RF-Kill state since we may have missed the interrupt */ + hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans->status); + else + clear_bit(STATUS_RFKILL, &trans->status); + + iwl_trans_pcie_rf_kill(trans, hw_rfkill); + if (hw_rfkill && !run_in_rfkill) + ret = -ERFKILL; + +out: + mutex_unlock(&trans_pcie->mutex); + return ret; +} + +static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr) +{ + iwl_pcie_reset_ict(trans); + iwl_pcie_tx_start(trans, scd_addr); +} + static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); diff --git a/drivers/net/wireless/realtek/rtlwifi/rc.c b/drivers/net/wireless/realtek/rtlwifi/rc.c index 74c14ce28238eed70f8ad798f0724642147411d3..28f7010e7108bf3c3f8d3a89296b2e0b16f2c555 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rc.c +++ b/drivers/net/wireless/realtek/rtlwifi/rc.c @@ -138,6 +138,11 @@ static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv, ((wireless_mode == WIRELESS_MODE_N_5G) || (wireless_mode == WIRELESS_MODE_N_24G))) rate->flags |= IEEE80211_TX_RC_MCS; + if (sta && sta->vht_cap.vht_supported && + (wireless_mode == WIRELESS_MODE_AC_5G || + wireless_mode == WIRELESS_MODE_AC_24G || + wireless_mode == WIRELESS_MODE_AC_ONLY)) + rate->flags |= IEEE80211_TX_RC_VHT_MCS; } } diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c index 9ac118e727e9402032bdfe972ee40c9d34d12a00..564ca750c5ee8895a702e9a9ea145e75391e02bf 100644 --- a/drivers/net/wireless/ti/wlcore/io.c +++ b/drivers/net/wireless/ti/wlcore/io.c @@ -175,14 +175,14 @@ int wlcore_set_partition(struct wl1271 *wl, if (ret < 0) goto out; + /* We don't need the size of the last partition, as it is + * automatically calculated based on the total memory size and + * the sizes of the previous partitions. + */ ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start); if (ret < 0) goto out; - ret = wlcore_raw_write32(wl, HW_PART3_SIZE_ADDR, p->mem3.size); - if (ret < 0) - goto out; - out: return ret; } diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h index 6c257b54f4150323811c46d2a49251251c113170..10cf3747694d5bf46b865fc68a990b5b4c7c5a59 100644 --- a/drivers/net/wireless/ti/wlcore/io.h +++ b/drivers/net/wireless/ti/wlcore/io.h @@ -36,8 +36,8 @@ #define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12) #define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16) #define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20) -#define HW_PART3_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 24) -#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 28) +#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24) + #define HW_ACCESS_REGISTER_SIZE 4 #define HW_ACCESS_PRAM_MAX_RANGE 0x3c000