diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index d114db9477f43468b85a692e034f00d18ec2d596..5b57367e28db9b848de3e54c32830faa62793924 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -22,390 +22,10 @@ header-y += wimax/
 
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
-header-y += a.out.h
 endif
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),)
-header-y += kvm.h
 endif
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
-header-y += kvm_para.h
 endif
-
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atm.h
-header-y += atm_eni.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atm_nicstar.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += audit.h
-header-y += auto_fs.h
-header-y += auto_fs4.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += baycom.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blk_types.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += dlm.h
-header-y += dlm_device.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dlmconstants.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += elfcore.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += gen_stats.h
-header-y += genetlink.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += hdlc.h
-header-y += hdlcdrv.h
-header-y += hdreg.h
-header-y += hid.h
-header-y += hiddev.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += igmp.h
-header-y += in.h
-header-y += in6.h
-header-y += in_route.h
-header-y += sock_diag.h
-header-y += inet_diag.h
-header-y += unix_diag.h
-header-y += packet_diag.h
-header-y += inotify.h
-header-y += input.h
-header-y += ioctl.h
-header-y += ip.h
-header-y += ip6_tunnel.h
-header-y += ip_vs.h
-header-y += ipc.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn.h
-header-y += isdn_divertif.h
-header-y += isdn_ppp.h
-header-y += isdnif.h
-header-y += iso_fs.h
-header-y += ivtv.h
-header-y += ivtvfb.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kd.h
-header-y += kdev_t.h
-header-y += kernel.h
-header-y += kernelcapi.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-header-y += l2tp.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += mei.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mqueue.h
-header-y += mroute.h
-header-y += mroute6.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += n_r3964.h
-header-y += nbd.h
-header-y += ncp.h
-header-y += ncp_fs.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += neighbour.h
-header-y += net.h
-header-y += net_dropmon.h
-header-y += net_tstamp.h
-header-y += netdevice.h
-header-y += netfilter.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += nfc.h
-header-y += nfs.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfs_fs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nfsacl.h
-header-y += nl80211.h
-header-y += nubus.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pktcdvd.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp-ioctl.h
-header-y += ppp_defs.h
-header-y += pps.h
-header-y += prctl.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += screen_info.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial.h
-header-y += serial_core.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signal.h
-header-y += signalfd.h
-header-y += snmp.h
-header-y += socket.h
-header-y += sockios.h
-header-y += som.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += sound.h
-header-y += soundcard.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += time.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc.h
-header-y += tipc_config.h
-header-y += toshiba.h
-header-y += tty.h
-header-y += tty_flags.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += usbdevice_fs.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_ids.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += vt.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
index e86dfca44589f49e083e53a3f905868ba2e89955..220f1433889566f681c738b3c7a9bd3e23f62db5 100644
--- a/include/linux/a.out.h
+++ b/include/linux/a.out.h
@@ -1,278 +1,84 @@
 #ifndef __A_OUT_GNU_H__
 #define __A_OUT_GNU_H__
 
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-#include <asm/a.out.h>
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
+#include <uapi/linux/a.out.h>
 
 #ifndef __ASSEMBLY__
-
-/* these go in the N_MACHTYPE field */
-enum machine_type {
 #if defined (M_OLDSUN2)
-  M__OLDSUN2 = M_OLDSUN2,
 #else
-  M_OLDSUN2 = 0,
 #endif
 #if defined (M_68010)
-  M__68010 = M_68010,
 #else
-  M_68010 = 1,
 #endif
 #if defined (M_68020)
-  M__68020 = M_68020,
 #else
-  M_68020 = 2,
 #endif
 #if defined (M_SPARC)
-  M__SPARC = M_SPARC,
 #else
-  M_SPARC = 3,
 #endif
-  /* skip a bunch so we don't run into any of sun's numbers */
-  M_386 = 100,
-  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
-  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
-};
-
 #if !defined (N_MAGIC)
-#define N_MAGIC(exec) ((exec).a_info & 0xffff)
 #endif
-#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
-#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
-#define N_SET_INFO(exec, magic, type, flags) \
-	((exec).a_info = ((magic) & 0xffff) \
-	 | (((int)(type) & 0xff) << 16) \
-	 | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(exec, magic) \
-	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(exec, machtype) \
-	((exec).a_info = \
-	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
-
-#define N_SET_FLAGS(exec, flags) \
-	((exec).a_info = \
-	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable.  */
-#define OMAGIC 0407
-/* Code indicating pure executable.  */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable.  */
-#define ZMAGIC 0413
-/* This indicates a demand-paged executable with the header in the text. 
-   The first page is unmapped to help trap NULL pointer references */
-#define QMAGIC 0314
-
-/* Code indicating core file.  */
-#define CMAGIC 0421
-
 #if !defined (N_BADMAG)
-#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
-			&& N_MAGIC(x) != NMAGIC		\
-  			&& N_MAGIC(x) != ZMAGIC \
-		        && N_MAGIC(x) != QMAGIC)
 #endif
-
-#define _N_HDROFF(x) (1024 - sizeof (struct exec))
-
 #if !defined (N_TXTOFF)
-#define N_TXTOFF(x) \
- (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
-  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
 #endif
-
 #if !defined (N_DATOFF)
-#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
 #endif
-
 #if !defined (N_TRELOFF)
-#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
 #endif
-
 #if !defined (N_DRELOFF)
-#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
 #endif
-
 #if !defined (N_SYMOFF)
-#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
 #endif
-
 #if !defined (N_STROFF)
-#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
 #endif
-
-/* Address of text segment in memory after it is loaded.  */
 #if !defined (N_TXTADDR)
-#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
 #endif
-
-/* Address of data segment in memory after it is loaded.
-   Note that it is up to you to define SEGMENT_SIZE
-   on machines not listed here.  */
 #if defined(vax) || defined(hp300) || defined(pyr)
-#define SEGMENT_SIZE page_size
 #endif
 #ifdef	sony
-#define	SEGMENT_SIZE	0x2000
 #endif	/* Sony.  */
 #ifdef is68k
-#define SEGMENT_SIZE 0x20000
 #endif
 #if defined(m68k) && defined(PORTAR)
-#define PAGE_SIZE 0x400
-#define SEGMENT_SIZE PAGE_SIZE
 #endif
-
 #ifdef linux
-#ifdef __KERNEL__
 #include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
 #if defined(__i386__) || defined(__mc68000__)
-#define SEGMENT_SIZE	1024
 #else
 #ifndef SEGMENT_SIZE
-#ifdef __KERNEL__
 #define SEGMENT_SIZE	PAGE_SIZE
-#else
-#define SEGMENT_SIZE   getpagesize()
-#endif
 #endif
 #endif
 #endif
-
-#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
-
-#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
-
 #ifndef N_DATADDR
-#define N_DATADDR(x) \
-    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
-     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
 #endif
-
-/* Address of bss segment in memory after it is loaded.  */
 #if !defined (N_BSSADDR)
-#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
 #endif
-
 #if !defined (N_NLIST_DECLARED)
-struct nlist {
-  union {
-    char *n_name;
-    struct nlist *n_next;
-    long n_strx;
-  } n_un;
-  unsigned char n_type;
-  char n_other;
-  short n_desc;
-  unsigned long n_value;
-};
 #endif /* no N_NLIST_DECLARED.  */
-
 #if !defined (N_UNDF)
-#define N_UNDF 0
 #endif
 #if !defined (N_ABS)
-#define N_ABS 2
 #endif
 #if !defined (N_TEXT)
-#define N_TEXT 4
 #endif
 #if !defined (N_DATA)
-#define N_DATA 6
 #endif
 #if !defined (N_BSS)
-#define N_BSS 8
 #endif
 #if !defined (N_FN)
-#define N_FN 15
 #endif
-
 #if !defined (N_EXT)
-#define N_EXT 1
 #endif
 #if !defined (N_TYPE)
-#define N_TYPE 036
 #endif
 #if !defined (N_STAB)
-#define N_STAB 0340
 #endif
-
-/* The following type indicates the definition of a symbol as being
-   an indirect reference to another symbol.  The other symbol
-   appears as an undefined reference, immediately following this symbol.
-
-   Indirection is asymmetrical.  The other symbol's value will be used
-   to satisfy requests for the indirect symbol, but not vice versa.
-   If the other symbol does not have a definition, libraries will
-   be searched to find a definition.  */
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
-   All the N_SET[ATDB] symbols with the same name form one set.
-   Space is allocated for the set in the text section, and each set
-   element's value is stored into one word of the space.
-   The first word of the space is the length of the set (number of elements).
-
-   The address of the set is made into an N_SETV symbol
-   whose name is the same as the name of the set.
-   This symbol acts like a N_DATA global symbol
-   in that it can satisfy undefined external references.  */
-
-/* These appear as input to LD, in a .o file.  */
-#define	N_SETA	0x14		/* Absolute set element symbol */
-#define	N_SETT	0x16		/* Text set element symbol */
-#define	N_SETD	0x18		/* Data set element symbol */
-#define	N_SETB	0x1A		/* Bss set element symbol */
-
-/* This is output from LD.  */
-#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
-
 #if !defined (N_RELOCATION_INFO_DECLARED)
-/* This structure describes a single relocation to be performed.
-   The text-relocation section of the file is a vector of these structures,
-   all of which apply to the text section.
-   Likewise, the data-relocation section applies to the data section.  */
-
-struct relocation_info
-{
-  /* Address (within segment) to be relocated.  */
-  int r_address;
-  /* The meaning of r_symbolnum depends on r_extern.  */
-  unsigned int r_symbolnum:24;
-  /* Nonzero means value is a pc-relative offset
-     and it should be relocated for changes in its own address
-     as well as for changes in the symbol or section specified.  */
-  unsigned int r_pcrel:1;
-  /* Length (as exponent of 2) of the field to be relocated.
-     Thus, a value of 2 indicates 1<<2 bytes.  */
-  unsigned int r_length:2;
-  /* 1 => relocate with value of symbol.
-          r_symbolnum is the index of the symbol
-	  in file's the symbol table.
-     0 => relocate with the address of a segment.
-          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
-	  (the N_EXT bit may be set also, but signifies nothing).  */
-  unsigned int r_extern:1;
-  /* Four bits that aren't used, but when writing an object file
-     it is desirable to clear them.  */
 #ifdef NS32K
-  unsigned r_bsr:1;
-  unsigned r_disp:1;
-  unsigned r_pad:2;
 #else
-  unsigned int r_pad:4;
 #endif
-};
 #endif /* no N_RELOCATION_INFO_DECLARED.  */
-
 #endif /*__ASSEMBLY__ */
 #endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/acct.h b/include/linux/acct.h
index d537aa0ec414a2dc70b84580a0799096e601ee3c..4a5b7cb56079121152b780d7a75e54f43de4f344 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -11,109 +11,11 @@
  *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
  *
  */
-
 #ifndef _LINUX_ACCT_H
 #define _LINUX_ACCT_H
 
-#include <linux/types.h>
-
-#include <asm/param.h>
-#include <asm/byteorder.h>
-
-/* 
- *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
- *  exponent and a 13-bit fraction.
- *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
- *  (leading 1 not stored).
- *  See linux/kernel/acct.c for the specific encoding systems used.
- */
-
-typedef __u16	comp_t;
-typedef __u32	comp2_t;
-
-/*
- *   accounting file record
- *
- *   This structure contains all of the information written out to the
- *   process accounting file whenever a process exits.
- */
+#include <uapi/linux/acct.h>
 
-#define ACCT_COMM	16
-
-struct acct
-{
-	char		ac_flag;		/* Flags */
-	char		ac_version;		/* Always set to ACCT_VERSION */
-	/* for binary compatibility back until 2.0 */
-	__u16		ac_uid16;		/* LSB of Real User ID */
-	__u16		ac_gid16;		/* LSB of Real Group ID */
-	__u16		ac_tty;			/* Control Terminal */
-	__u32		ac_btime;		/* Process Creation Time */
-	comp_t		ac_utime;		/* User Time */
-	comp_t		ac_stime;		/* System Time */
-	comp_t		ac_etime;		/* Elapsed Time */
-	comp_t		ac_mem;			/* Average Memory Usage */
-	comp_t		ac_io;			/* Chars Transferred */
-	comp_t		ac_rw;			/* Blocks Read or Written */
-	comp_t		ac_minflt;		/* Minor Pagefaults */
-	comp_t		ac_majflt;		/* Major Pagefaults */
-	comp_t		ac_swaps;		/* Number of Swaps */
-/* m68k had no padding here. */
-#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
-	__u16		ac_ahz;			/* AHZ */
-#endif
-	__u32		ac_exitcode;		/* Exitcode */
-	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
-	__u8		ac_etime_hi;		/* Elapsed Time MSB */
-	__u16		ac_etime_lo;		/* Elapsed Time LSB */
-	__u32		ac_uid;			/* Real User ID */
-	__u32		ac_gid;			/* Real Group ID */
-};
-
-struct acct_v3
-{
-	char		ac_flag;		/* Flags */
-	char		ac_version;		/* Always set to ACCT_VERSION */
-	__u16		ac_tty;			/* Control Terminal */
-	__u32		ac_exitcode;		/* Exitcode */
-	__u32		ac_uid;			/* Real User ID */
-	__u32		ac_gid;			/* Real Group ID */
-	__u32		ac_pid;			/* Process ID */
-	__u32		ac_ppid;		/* Parent Process ID */
-	__u32		ac_btime;		/* Process Creation Time */
-#ifdef __KERNEL__
-	__u32		ac_etime;		/* Elapsed Time */
-#else
-	float		ac_etime;		/* Elapsed Time */
-#endif
-	comp_t		ac_utime;		/* User Time */
-	comp_t		ac_stime;		/* System Time */
-	comp_t		ac_mem;			/* Average Memory Usage */
-	comp_t		ac_io;			/* Chars Transferred */
-	comp_t		ac_rw;			/* Blocks Read or Written */
-	comp_t		ac_minflt;		/* Minor Pagefaults */
-	comp_t		ac_majflt;		/* Major Pagefaults */
-	comp_t		ac_swaps;		/* Number of Swaps */
-	char		ac_comm[ACCT_COMM];	/* Command Name */
-};
-
-/*
- *  accounting flags
- */
-				/* bit set when the process ... */
-#define AFORK		0x01	/* ... executed fork, but did not exec */
-#define ASU		0x02	/* ... used super-user privileges */
-#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
-#define ACORE		0x08	/* ... dumped core */
-#define AXSIG		0x10	/* ... was killed by a signal */
-
-#ifdef __BIG_ENDIAN
-#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
-#else
-#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
-#endif
-
-#ifdef __KERNEL__
 
 
 #ifdef CONFIG_BSD_PROCESS_ACCT
@@ -163,12 +65,6 @@ typedef struct acct_v3 acct_t;
 typedef struct acct acct_t;
 #endif
 
-#else
-#define ACCT_VERSION	2
-#define AHZ		(HZ)
-#endif	/* __KERNEL */
-
-#ifdef __KERNEL__
 #include <linux/jiffies.h>
 /*
  * Yet another set of HZ to *HZ helper functions.
@@ -210,6 +106,4 @@ static inline u64 nsec_to_AHZ(u64 x)
 	return x;
 }
 
-#endif  /* __KERNEL */
-
 #endif	/* _LINUX_ACCT_H */
diff --git a/include/linux/adb.h b/include/linux/adb.h
index 63bca502fa55edf8ffd9df6e7c44f2c4c2f83e3c..cde41300c7ad8679964e17447e82b143922d30de 100644
--- a/include/linux/adb.h
+++ b/include/linux/adb.h
@@ -4,43 +4,8 @@
 #ifndef __ADB_H
 #define __ADB_H
 
-/* ADB commands */
-#define ADB_BUSRESET		0
-#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
-#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
-#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
+#include <uapi/linux/adb.h>
 
-/* ADB default device IDs (upper 4 bits of ADB command byte) */
-#define ADB_DONGLE	1	/* "software execution control" devices */
-#define ADB_KEYBOARD	2
-#define ADB_MOUSE	3
-#define ADB_TABLET	4
-#define ADB_MODEM	5
-#define ADB_MISC	7	/* maybe a monitor */
-
-#define ADB_RET_OK	0
-#define ADB_RET_TIMEOUT	3
-
-/* The kind of ADB request. The controller may emulate some
-   or all of those CUDA/PMU packet kinds */
-#define ADB_PACKET	0
-#define CUDA_PACKET	1
-#define ERROR_PACKET	2
-#define TIMER_PACKET	3
-#define POWER_PACKET	4
-#define MACIIC_PACKET	5
-#define PMU_PACKET	6
-#define ADB_QUERY	7
-
-/* ADB queries */
-
-/* ADB_QUERY_GETDEVINFO
- * Query ADB slot for device presence
- * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
- */
-#define ADB_QUERY_GETDEVINFO	1
-
-#ifdef __KERNEL__
 
 struct adb_request {
 	unsigned char data[32];
@@ -98,6 +63,4 @@ int adb_reset_bus(void);
 int adb_try_handler_change(int address, int new_id);
 int adb_get_infos(int address, int *original_address, int *handler_id);
 
-#endif /* __KERNEL__ */
-
 #endif /* __ADB_H */
diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h
index b19801f73890b73f6661910fc64e223d33e76560..0d991071a9d4beb147c2f60e3102723ceac7ffd7 100644
--- a/include/linux/adfs_fs.h
+++ b/include/linux/adfs_fs.h
@@ -1,46 +1,8 @@
 #ifndef _ADFS_FS_H
 #define _ADFS_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/adfs_fs.h>
 
-/*
- * Disc Record at disc address 0xc00
- */
-struct adfs_discrecord {
-    __u8  log2secsize;
-    __u8  secspertrack;
-    __u8  heads;
-    __u8  density;
-    __u8  idlen;
-    __u8  log2bpmb;
-    __u8  skew;
-    __u8  bootoption;
-    __u8  lowsector;
-    __u8  nzones;
-    __le16 zone_spare;
-    __le32 root;
-    __le32 disc_size;
-    __le16 disc_id;
-    __u8  disc_name[10];
-    __le32 disc_type;
-    __le32 disc_size_high;
-    __u8  log2sharesize:4;
-    __u8  unused40:4;
-    __u8  big_flag:1;
-    __u8  unused41:1;
-    __u8  nzones_high;
-    __le32 format_version;
-    __le32 root_size;
-    __u8  unused52[60 - 52];
-};
-
-#define ADFS_DISCRECORD		(0xc00)
-#define ADFS_DR_OFFSET		(0x1c0)
-#define ADFS_DR_SIZE		 60
-#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
-
-#ifdef __KERNEL__
 /*
  * Calculate the boot block checksum on an ADFS drive.  Note that this will
  * appear to be correct if the sector contains all zeros, so also check that
@@ -59,5 +21,3 @@ static inline int adfs_checkbblk(unsigned char *ptr)
 	return (result & 0xff) != ptr[511];
 }
 #endif
-
-#endif
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index f6778eceb8f4058bbc932d9ead806968e2a27b6e..c6b61ca97053e933affe7ddd76bc9da792fcbc59 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -23,94 +23,12 @@
  * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
  */
-
 #ifndef _AGP_H
 #define _AGP_H 1
 
-#define AGPIOC_BASE       'A'
-#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
-#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
-#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
-#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
-#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
-#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
-#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
-#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
-#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
-#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
-#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
-
-#define AGP_DEVICE      "/dev/agpgart"
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef __KERNEL__
-#include <linux/types.h>
-
-struct agp_version {
-	__u16 major;
-	__u16 minor;
-};
-
-typedef struct _agp_info {
-	struct agp_version version;	/* version of the driver        */
-	__u32 bridge_id;	/* bridge vendor/device         */
-	__u32 agp_mode;		/* mode info of bridge          */
-	unsigned long aper_base;/* base of aperture             */
-	size_t aper_size;	/* size of aperture             */
-	size_t pg_total;	/* max pages (swap + system)    */
-	size_t pg_system;	/* max pages (system)           */
-	size_t pg_used;		/* current pages used           */
-} agp_info;
-
-typedef struct _agp_setup {
-	__u32 agp_mode;		/* mode info of bridge          */
-} agp_setup;
-
-/*
- * The "prot" down below needs still a "sleep" flag somehow ...
- */
-typedef struct _agp_segment {
-	__kernel_off_t pg_start;	/* starting page to populate    */
-	__kernel_size_t pg_count;	/* number of pages              */
-	int prot;			/* prot flags for mmap          */
-} agp_segment;
-
-typedef struct _agp_region {
-	__kernel_pid_t pid;		/* pid of process       */
-	__kernel_size_t seg_count;	/* number of segments   */
-	struct _agp_segment *seg_list;
-} agp_region;
-
-typedef struct _agp_allocate {
-	int key;		/* tag of allocation            */
-	__kernel_size_t pg_count;/* number of pages             */
-	__u32 type;		/* 0 == normal, other devspec   */
-   	__u32 physical;         /* device specific (some devices  
-				 * need a phys address of the     
-				 * actual page behind the gatt    
-				 * table)                        */
-} agp_allocate;
-
-typedef struct _agp_bind {
-	int key;		/* tag of allocation            */
-	__kernel_off_t pg_start;/* starting page to populate    */
-} agp_bind;
-
-typedef struct _agp_unbind {
-	int key;		/* tag of allocation            */
-	__u32 priority;		/* priority for paging out      */
-} agp_unbind;
-
-#else				/* __KERNEL__ */
 #include <linux/mutex.h>
 #include <linux/agp_backend.h>
+#include <uapi/linux/agpgart.h>
 
 #define AGPGART_MINOR 175
 
@@ -209,6 +127,4 @@ struct agp_front_data {
 	bool backend_acquired;
 };
 
-#endif				/* __KERNEL__ */
-
 #endif				/* _AGP_H */
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
index 01a6244c9bc9b52f0583449d667a1a34f2a95dd7..9c3a87184f48686433bd6f600fac83c7ce5df550 100644
--- a/include/linux/apm_bios.h
+++ b/include/linux/apm_bios.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_APM_H
-#define _LINUX_APM_H
-
 /*
  * Include file for the interface to an APM BIOS
  * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
@@ -15,25 +12,11 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  */
+#ifndef _LINUX_APM_H
+#define _LINUX_APM_H
 
-#include <linux/types.h>
-
-typedef unsigned short	apm_event_t;
-typedef unsigned short	apm_eventinfo_t;
-
-struct apm_bios_info {
-	__u16	version;
-	__u16	cseg;
-	__u32	offset;
-	__u16	cseg_16;
-	__u16	dseg;
-	__u16	flags;
-	__u16	cseg_len;
-	__u16	cseg_16_len;
-	__u16	dseg_len;
-};
+#include <uapi/linux/apm_bios.h>
 
-#ifdef __KERNEL__
 
 #define APM_CS		(GDT_ENTRY_APMBIOS_BASE * 8)
 #define APM_CS_16	(APM_CS + 8)
@@ -110,111 +93,9 @@ struct apm_info {
  */
 extern struct apm_info	apm_info;
 
-#endif	/* __KERNEL__ */
-
-/*
- * Power states
- */
-#define APM_STATE_READY		0x0000
-#define APM_STATE_STANDBY	0x0001
-#define APM_STATE_SUSPEND	0x0002
-#define APM_STATE_OFF		0x0003
-#define APM_STATE_BUSY		0x0004
-#define APM_STATE_REJECT	0x0005
-#define APM_STATE_OEM_SYS	0x0020
-#define APM_STATE_OEM_DEV	0x0040
-
-#define APM_STATE_DISABLE	0x0000
-#define APM_STATE_ENABLE	0x0001
-
-#define APM_STATE_DISENGAGE	0x0000
-#define APM_STATE_ENGAGE	0x0001
-
-/*
- * Events (results of Get PM Event)
- */
-#define APM_SYS_STANDBY		0x0001
-#define APM_SYS_SUSPEND		0x0002
-#define APM_NORMAL_RESUME	0x0003
-#define APM_CRITICAL_RESUME	0x0004
-#define APM_LOW_BATTERY		0x0005
-#define APM_POWER_STATUS_CHANGE	0x0006
-#define APM_UPDATE_TIME		0x0007
-#define APM_CRITICAL_SUSPEND	0x0008
-#define APM_USER_STANDBY	0x0009
-#define APM_USER_SUSPEND	0x000a
-#define APM_STANDBY_RESUME	0x000b
-#define APM_CAPABILITY_CHANGE	0x000c
-
-/*
- * Error codes
- */
-#define APM_SUCCESS		0x00
-#define APM_DISABLED		0x01
-#define APM_CONNECTED		0x02
-#define APM_NOT_CONNECTED	0x03
-#define APM_16_CONNECTED	0x05
-#define APM_16_UNSUPPORTED	0x06
-#define APM_32_CONNECTED	0x07
-#define APM_32_UNSUPPORTED	0x08
-#define APM_BAD_DEVICE		0x09
-#define APM_BAD_PARAM		0x0a
-#define APM_NOT_ENGAGED		0x0b
-#define APM_BAD_FUNCTION	0x0c
-#define APM_RESUME_DISABLED	0x0d
-#define APM_NO_ERROR		0x53
-#define APM_BAD_STATE		0x60
-#define APM_NO_EVENTS		0x80
-#define APM_NOT_PRESENT		0x86
-
-/*
- * APM Device IDs
- */
-#define APM_DEVICE_BIOS		0x0000
-#define APM_DEVICE_ALL		0x0001
-#define APM_DEVICE_DISPLAY	0x0100
-#define APM_DEVICE_STORAGE	0x0200
-#define APM_DEVICE_PARALLEL	0x0300
-#define APM_DEVICE_SERIAL	0x0400
-#define APM_DEVICE_NETWORK	0x0500
-#define APM_DEVICE_PCMCIA	0x0600
-#define APM_DEVICE_BATTERY	0x8000
-#define APM_DEVICE_OEM		0xe000
-#define APM_DEVICE_OLD_ALL	0xffff
-#define APM_DEVICE_CLASS	0x00ff
-#define APM_DEVICE_MASK		0xff00
-
-#ifdef __KERNEL__
 /*
  * This is the "All Devices" ID communicated to the BIOS
  */
 #define APM_DEVICE_BALL		((apm_info.connection_version > 0x0100) ? \
 				 APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
-#endif
-
-/*
- * Battery status
- */
-#define APM_MAX_BATTERIES	2
-
-/*
- * APM defined capability bit flags
- */
-#define APM_CAP_GLOBAL_STANDBY		0x0001
-#define APM_CAP_GLOBAL_SUSPEND		0x0002
-#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
-#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
-#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
-#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
-#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
-#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
-
-/*
- * ioctl operations
- */
-#include <linux/ioctl.h>
-
-#define APM_IOC_STANDBY		_IO('A', 1)
-#define APM_IOC_SUSPEND		_IO('A', 2)
-
 #endif	/* LINUX_APM_H */
diff --git a/include/linux/atalk.h b/include/linux/atalk.h
index f57c36881c4898b24d07897fec211ce03b45dbfa..73fd8b7e9534434d663aa2a18ab5c2a58421b739 100644
--- a/include/linux/atalk.h
+++ b/include/linux/atalk.h
@@ -1,49 +1,9 @@
 #ifndef __LINUX_ATALK_H__
 #define __LINUX_ATALK_H__
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-/*
- * AppleTalk networking structures
- *
- * The following are directly referenced from the University Of Michigan
- * netatalk for compatibility reasons.
- */
-#define ATPORT_FIRST	1
-#define ATPORT_RESERVED	128
-#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
-#define ATADDR_ANYNET	(__u16)0
-#define ATADDR_ANYNODE	(__u8)0
-#define ATADDR_ANYPORT  (__u8)0
-#define ATADDR_BCAST	(__u8)255
-#define DDP_MAXSZ	587
-#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
-
-#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
-
-struct atalk_addr {
-	__be16	s_net;
-	__u8	s_node;
-};
-
-struct sockaddr_at {
-	__kernel_sa_family_t sat_family;
-	__u8		  sat_port;
-	struct atalk_addr sat_addr;
-	char		  sat_zero[8];
-};
-
-struct atalk_netrange {
-	__u8	nr_phase;
-	__be16	nr_firstnet;
-	__be16	nr_lastnet;
-};
-
-#ifdef __KERNEL__
 
 #include <net/sock.h>
+#include <uapi/linux/atalk.h>
 
 struct atalk_route {
 	struct net_device  *dev;
@@ -205,5 +165,4 @@ extern void atalk_proc_exit(void);
 #define atalk_proc_exit()	do { } while(0)
 #endif /* CONFIG_PROC_FS */
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_ATALK_H__ */
diff --git a/include/linux/atm.h b/include/linux/atm.h
index d3b292174aeb0821f8d63c3e6317a1f4d5e8b3d4..30006c4359516970be63aaa3ab788c260fe4eda1 100644
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -1,242 +1,9 @@
 /* atm.h - general ATM declarations */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-/*
- * WARNING: User-space programs should not #include <linux/atm.h> directly.
- *          Instead, #include <atm.h>
- */
-
 #ifndef _LINUX_ATM_H
 #define _LINUX_ATM_H
 
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
-
-#include <linux/compiler.h>
-#include <linux/atmapi.h>
-#include <linux/atmsap.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/* general ATM constants */
-#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
-#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
-#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
-#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
-#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
-#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
-#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
-#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
-
-#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
-#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
-#define ATM_MAX_VCI		 65535	/* maximum VCI */
-
-
-/* "protcol" values for the socket system call */
-#define ATM_NO_AAL	0		/* AAL not specified */
-#define ATM_AAL0	13		/* "raw" ATM cells */
-#define ATM_AAL1	1		/* AAL1 (CBR) */
-#define ATM_AAL2	2		/* AAL2 (VBR) */
-#define ATM_AAL34	3		/* AAL3/4 (data) */
-#define ATM_AAL5	5		/* AAL5 (data) */
-
-/*
- * socket option name coding functions
- *
- * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
- * << 22 only reserves 9 bits for the level.  On some architectures
- * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
- */
-
-#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
-				sizeof(t))
-#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
-#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
-#define __SO_SIZE(c)		((c) & 0x3fff)
-
-/*
- * ATM layer
- */
-
-#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
-			    /* set CLP bit value - TODO */
-#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
-			    /* connection identifier range; socket must be
-			       bound or connected */
-#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
-			    /* Quality of Service setting */
-#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
-			    /* Service Access Point */
-#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
-			    /* "PVC" address (also for SVCs); get only */
-#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
-			    /* make this vc a p2mp */
-
-
-/*
- * Note @@@: since the socket layers don't really distinguish the control and
- * the data plane but generally seems to be data plane-centric, any layer is
- * about equally wrong for the SAP. If you have a better idea about this,
- * please speak up ...
- */
-
-
-/* ATM cell header (for AAL0) */
-
-/* BEGIN_CH */
-#define ATM_HDR_GFC_MASK	0xf0000000
-#define ATM_HDR_GFC_SHIFT	28
-#define ATM_HDR_VPI_MASK	0x0ff00000
-#define ATM_HDR_VPI_SHIFT	20
-#define ATM_HDR_VCI_MASK	0x000ffff0
-#define ATM_HDR_VCI_SHIFT	4
-#define ATM_HDR_PTI_MASK	0x0000000e
-#define ATM_HDR_PTI_SHIFT	1
-#define ATM_HDR_CLP		0x00000001
-/* END_CH */
-
-
-/* PTI codings */
-
-/* BEGIN_PTI */
-#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
-#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
-#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
-#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
-#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
-#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
-#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
-#define ATM_PTI_RSV	7  /* reserved */
-/* END_PTI */
-
-
-/*
- * The following items should stay in linux/atm.h, which should be linked to
- * netatm/atm.h
- */
-
-/* Traffic description */
-
-#define ATM_NONE	0		/* no traffic */
-#define ATM_UBR		1
-#define ATM_CBR		2
-#define ATM_VBR		3
-#define ATM_ABR		4
-#define ATM_ANYCLASS	5		/* compatible with everything */
-
-#define ATM_MAX_PCR	-1		/* maximum available PCR */
-
-struct atm_trafprm {
-	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
-	int		max_pcr;	/* maximum PCR in cells per second */
-	int		pcr;		/* desired PCR in cells per second */
-	int		min_pcr;	/* minimum PCR in cells per second */
-	int		max_cdv;	/* maximum CDV in microseconds */
-	int		max_sdu;	/* maximum SDU in bytes */
-        /* extra params for ABR */
-        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
-        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
-        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
-        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
-        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
-        unsigned int nrm_pres  :1;      /* nrm present bit */
-        unsigned int trm_pres  :1;     	/* rm present bit */
-        unsigned int adtf_pres :1;     	/* adtf present bit */
-        unsigned int cdf_pres  :1;    	/* cdf present bit*/
-        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
-        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
-	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
-	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
-        unsigned int spare     :9;      /* spare bits */ 
-};
-
-struct atm_qos {
-	struct atm_trafprm txtp;	/* parameters in TX direction */
-	struct atm_trafprm rxtp __ATM_API_ALIGN;
-					/* parameters in RX direction */
-	unsigned char aal __ATM_API_ALIGN;
-};
-
-/* PVC addressing */
-
-#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
-#define ATM_VPI_ANY	-1
-#define ATM_VCI_ANY	-1
-#define ATM_VPI_UNSPEC	-2
-#define ATM_VCI_UNSPEC	-2
-
-
-struct sockaddr_atmpvc {
-	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
-	struct {			/* PVC address */
-		short	itf;		/* ATM interface */
-		short	vpi;		/* VPI (only 8 bits at UNI) */
-		int	vci;		/* VCI (only 16 bits at UNI) */
-	} sap_addr __ATM_API_ALIGN;	/* PVC address */
-};
-
-/* SVC addressing */
-
-#define	ATM_ESA_LEN	20		/* ATM End System Address length */
-#define ATM_E164_LEN	12		/* maximum E.164 number length */
-
-#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
-#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
-#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
-#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
-
-#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
-#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
-#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
-#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
+#include <uapi/linux/atm.h>
 
-#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
-#define ATM_LIJ		1		/* request joining */
-#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
-#define ATM_LIJ_NJ	3		/* set to network join */
-
-
-struct sockaddr_atmsvc {
-    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
-    struct {				/* SVC address */
-        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
-        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
-    					/* unused addresses must be bzero'ed */
-	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
-	__u32	lij_id;		/* LIJ call identifier */
-    } sas_addr __ATM_API_ALIGN;		/* SVC address */
-};
-
-
-static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
-{
-	return *addr.sas_addr.prv || *addr.sas_addr.pub;
-}
-
-
-static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
-{
-	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
-}
-
-
-/*
- * Some stuff for linux/sockios.h
- */
-
-struct atmif_sioc {
-	int number;
-	int length;
-	void __user *arg;
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 struct compat_atmif_sioc {
@@ -246,6 +13,3 @@ struct compat_atmif_sioc {
 };
 #endif
 #endif
-
-typedef unsigned short atm_backend_t;
-#endif
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
index 375638f8554b93c8338d0d8499688e329c4ffbfb..db6b65fc0aec7fa2bd5526015aedb29c6f5c7f00 100644
--- a/include/linux/atm_tcp.h
+++ b/include/linux/atm_tcp.h
@@ -3,61 +3,11 @@
 
 /* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
 
-
 #ifndef LINUX_ATM_TCP_H
 #define LINUX_ATM_TCP_H
 
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/*
- * All values in struct atmtcp_hdr are in network byte order
- */
-
-struct atmtcp_hdr {
-	__u16	vpi;
-	__u16	vci;
-	__u32	length;		/* ... of data part */
-};
-
-/*
- * All values in struct atmtcp_command are in host byte order
- */
-
-#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
-#define ATMTCP_CTRL_OPEN	1	/* request/reply */
-#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
+#include <uapi/linux/atm_tcp.h>
 
-struct atmtcp_control {
-	struct atmtcp_hdr hdr;	/* must be first */
-	int type;		/* message type; both directions */
-	atm_kptr_t vcc;		/* both directions */
-	struct sockaddr_atmpvc addr; /* suggested value from kernel */
-	struct atm_qos	qos;	/* both directions */
-	int result;		/* to kernel only */
-} __ATM_API_ALIGN;
-
-/*
- * Field usage:
- * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
- * -----------  ----	------- ----	----	---	---	------
- * OPEN		K->D	Y	Y	Y	Y	Y	0
- * OPEN		D->K	-	Y	Y	Y	Y	Y
- * CLOSE	K->D	-	-	Y	-	Y	0
- * CLOSE	D->K	-	-	-	-	Y	Y
- */
-
-#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
-#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
-						   interface */
-#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
-						   interface */
-
-
-#ifdef __KERNEL__
 
 struct atm_tcp_ops {
 	int (*attach)(struct atm_vcc *vcc,int itf);
@@ -69,5 +19,3 @@ struct atm_tcp_ops {
 extern struct atm_tcp_ops atm_tcp_ops;
 
 #endif
-
-#endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index 06fd4bbc58f68c17c2e93b7b05385159e41dc6ea..22ef21c33d0c600f5adf48d34e5bdde4687d76c4 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -1,218 +1,8 @@
 /* atmdev.h - ATM device driver declarations and various related items */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
 #ifndef LINUX_ATMDEV_H
 #define LINUX_ATMDEV_H
 
 
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ESI_LEN		6
-
-#define ATM_OC3_PCR	(155520000/270*260/8/53)
-			/* OC3 link rate:  155520000 bps
-			   SONET overhead: /270*260 (9 section, 1 path)
-			   bits per cell:  /8/53
-			   max cell rate:  353207.547 cells/sec */
-#define ATM_25_PCR	((25600000/8-8000)/54)
-			/* 25 Mbps ATM cell rate (59111) */
-#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
-			/* OC12 link rate: 622080000 bps
-			   SONET overhead: /1080*1040
-			   bits per cell:  /8/53
-			   max cell rate:  1412830.188 cells/sec */
-#define ATM_DS3_PCR	(8000*12)
-			/* DS3: 12 cells in a 125 usec time slot */
-
-
-#define __AAL_STAT_ITEMS \
-    __HANDLE_ITEM(tx);			/* TX okay */ \
-    __HANDLE_ITEM(tx_err);		/* TX errors */ \
-    __HANDLE_ITEM(rx);			/* RX okay */ \
-    __HANDLE_ITEM(rx_err);		/* RX errors */ \
-    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
-
-struct atm_aal_stats {
-#define __HANDLE_ITEM(i) int i
-	__AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct atm_dev_stats {
-	struct atm_aal_stats aal0;
-	struct atm_aal_stats aal34;
-	struct atm_aal_stats aal5;
-} __ATM_API_ALIGN;
-
-
-#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
-					/* get link rate */
-#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
-					/* get interface names (numbers) */
-#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
-					/* get interface type name */
-#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
-					/* get interface ESI */
-#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
-					/* get itf's local ATM addr. list */
-#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
-					/* reset itf's ATM address list */
-#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
-					/* add a local ATM address */
-#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
-					/* remove a local ATM address */
-#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
-					/* get connection identifier range */
-#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
-					/* set connection identifier range */
-#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
-					/* set interface ESI */
-#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
-					/* force interface ESI */
-#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
-					/* register a LECS address */
-#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
-					/* unregister a LECS address */
-#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
-					/* retrieve LECS address(es) */
-
-#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
-					/* get AAL layer statistics */
-#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
-					/* get AAL layer statistics and zero */
-#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
-					/* get loopback mode */
-#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
-					/* set loopback mode */
-#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
-					/* query supported loopback modes */
-#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
-					/* enable or disable single-copy */
-#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
-					/* set backend handler */
-#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
-					/* use backend to make new if */
-#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
- 					/* add party to p2mp call */
-#ifdef CONFIG_COMPAT
-/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
-#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
-#endif
-#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
-					/* drop party from p2mp call */
-
-/*
- * These are backend handkers that can be set via the ATM_SETBACKEND call
- * above.  In the future we may support dynamic loading of these - for now,
- * they're just being used to share the ATMIOC_BACKEND ioctls
- */
-#define ATM_BACKEND_RAW		0	
-#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
-#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
-
-/* for ATM_GETTYPE */
-#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
-
-/*
- * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
- */
-
-/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
-#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
-#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
-#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
-/* RESERVED		4	loop back on PHY side  ---'		      */
-#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
-#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
-
-/* Direction of loopback */
-#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
-#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
-
-#define __ATM_LM_XTLOC(n)	((n) & 0xff)
-#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
-
-#define ATM_LM_NONE	0	/* no loopback */
-
-#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
-#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
-#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
-#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
-
-#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
-#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
-#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
-#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
-
-/*
- * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
- * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
- */
-
-
-struct atm_iobuf {
-	int length;
-	void __user *buffer;
-};
-
-/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
-
-#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
- 
-struct atm_cirange {
-	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
-	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
-};
-
-/* for ATM_SETSC; actually taken from the ATM_VF number space */
-
-#define ATM_SC_RX	1024		/* enable RX single-copy */
-#define ATM_SC_TX	2048		/* enable TX single-copy */
-
-#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
-				  anyway */
-
-/* MF: change_qos (Modify) flags */
-
-#define ATM_MF_IMMED	 1	/* Block until change is effective */
-#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
-#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
-#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
-#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
-#define ATM_MF_BWD	32	/* Set the backward direction parameters */
-
-#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
-			  ATM_MF_DEC_SHP | ATM_MF_BWD)
-
-/*
- * ATM_VS_* are used to express VC state in a human-friendly way.
- */
-
-#define ATM_VS_IDLE	0	/* VC is not used */
-#define ATM_VS_CONNECTED 1	/* VC is connected */
-#define ATM_VS_CLOSING	2	/* VC is closing */
-#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
-#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
-#define ATM_VS_BOUND	5	/* VC is bound */
-
-#define ATM_VS2TXT_MAP \
-    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
-
-#define ATM_VF2TXT_MAP \
-    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
-    "RELEASED", "HASQOS",	"LISTEN",	"META", \
-    "256",	"512",		"1024",		"2048", \
-    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
-
-
-#ifdef __KERNEL__
-
 #include <linux/wait.h> /* wait_queue_head_t */
 #include <linux/time.h> /* struct timeval */
 #include <linux/net.h>
@@ -221,6 +11,7 @@ struct atm_cirange {
 #include <linux/uio.h>
 #include <net/sock.h>
 #include <linux/atomic.h>
+#include <uapi/linux/atmdev.h>
 
 #ifdef CONFIG_PROC_FS
 #include <linux/proc_fs.h>
@@ -521,6 +312,4 @@ void deregister_atm_ioctl(struct atm_ioctl *);
 int register_atmdevice_notifier(struct notifier_block *nb);
 void unregister_atmdevice_notifier(struct notifier_block *nb);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
index b889fa64b0e0933c73b41f09e0e1006fc0f86f7c..bce729afbcf9a5e184e70edc1bebf9f65a0176a3 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -20,389 +20,11 @@
  * Written by Rickard E. (Rik) Faith <faith@redhat.com>
  *
  */
-
 #ifndef _LINUX_AUDIT_H_
 #define _LINUX_AUDIT_H_
 
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#include <linux/ptrace.h>
-
-/* The netlink messages for the audit system is divided into blocks:
- * 1000 - 1099 are for commanding the audit system
- * 1100 - 1199 user space trusted application messages
- * 1200 - 1299 messages internal to the audit daemon
- * 1300 - 1399 audit event messages
- * 1400 - 1499 SE Linux use
- * 1500 - 1599 kernel LSPP events
- * 1600 - 1699 kernel crypto events
- * 1700 - 1799 kernel anomaly records
- * 1800 - 1899 kernel integrity events
- * 1900 - 1999 future kernel use
- * 2000 is for otherwise unclassified kernel audit messages (legacy)
- * 2001 - 2099 unused (kernel)
- * 2100 - 2199 user space anomaly records
- * 2200 - 2299 user space actions taken in response to anomalies
- * 2300 - 2399 user space generated LSPP events
- * 2400 - 2499 user space crypto events
- * 2500 - 2999 future user space (maybe integrity labels and related events)
- *
- * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
- * exclusively user space. 1300-2099 is kernel --> user space 
- * communication.
- */
-#define AUDIT_GET		1000	/* Get status */
-#define AUDIT_SET		1001	/* Set status (enable/disable/auditd) */
-#define AUDIT_LIST		1002	/* List syscall rules -- deprecated */
-#define AUDIT_ADD		1003	/* Add syscall rule -- deprecated */
-#define AUDIT_DEL		1004	/* Delete syscall rule -- deprecated */
-#define AUDIT_USER		1005	/* Message from userspace -- deprecated */
-#define AUDIT_LOGIN		1006	/* Define the login id and information */
-#define AUDIT_WATCH_INS		1007	/* Insert file/dir watch entry */
-#define AUDIT_WATCH_REM		1008	/* Remove file/dir watch entry */
-#define AUDIT_WATCH_LIST	1009	/* List all file/dir watches */
-#define AUDIT_SIGNAL_INFO	1010	/* Get info about sender of signal to auditd */
-#define AUDIT_ADD_RULE		1011	/* Add syscall filtering rule */
-#define AUDIT_DEL_RULE		1012	/* Delete syscall filtering rule */
-#define AUDIT_LIST_RULES	1013	/* List syscall filtering rules */
-#define AUDIT_TRIM		1014	/* Trim junk from watched tree */
-#define AUDIT_MAKE_EQUIV	1015	/* Append to watched tree */
-#define AUDIT_TTY_GET		1016	/* Get TTY auditing status */
-#define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
-
-#define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
-#define AUDIT_USER_AVC		1107	/* We filter this differently */
-#define AUDIT_USER_TTY		1124	/* Non-ICANON TTY input meaning */
-#define AUDIT_LAST_USER_MSG	1199
-#define AUDIT_FIRST_USER_MSG2	2100	/* More user space messages */
-#define AUDIT_LAST_USER_MSG2	2999
- 
-#define AUDIT_DAEMON_START      1200    /* Daemon startup record */
-#define AUDIT_DAEMON_END        1201    /* Daemon normal stop record */
-#define AUDIT_DAEMON_ABORT      1202    /* Daemon error stop record */
-#define AUDIT_DAEMON_CONFIG     1203    /* Daemon config change */
-
-#define AUDIT_SYSCALL		1300	/* Syscall event */
-/* #define AUDIT_FS_WATCH	1301	 * Deprecated */
-#define AUDIT_PATH		1302	/* Filename path information */
-#define AUDIT_IPC		1303	/* IPC record */
-#define AUDIT_SOCKETCALL	1304	/* sys_socketcall arguments */
-#define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
-#define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
-#define AUDIT_CWD		1307	/* Current working directory */
-#define AUDIT_EXECVE		1309	/* execve arguments */
-#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
-#define AUDIT_MQ_OPEN		1312	/* POSIX MQ open record type */
-#define AUDIT_MQ_SENDRECV	1313	/* POSIX MQ send/receive record type */
-#define AUDIT_MQ_NOTIFY		1314	/* POSIX MQ notify record type */
-#define AUDIT_MQ_GETSETATTR	1315	/* POSIX MQ get/set attribute record type */
-#define AUDIT_KERNEL_OTHER	1316	/* For use by 3rd party modules */
-#define AUDIT_FD_PAIR		1317    /* audit record for pipe/socketpair */
-#define AUDIT_OBJ_PID		1318	/* ptrace target */
-#define AUDIT_TTY		1319	/* Input on an administrative TTY */
-#define AUDIT_EOE		1320	/* End of multi-record event */
-#define AUDIT_BPRM_FCAPS	1321	/* Information about fcaps increasing perms */
-#define AUDIT_CAPSET		1322	/* Record showing argument to sys_capset */
-#define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
-#define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
-#define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
-
-#define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
-#define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
-#define AUDIT_AVC_PATH		1402	/* dentry, vfsmount pair from avc */
-#define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
-#define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
-#define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
-#define AUDIT_MAC_UNLBL_ALLOW	1406	/* NetLabel: allow unlabeled traffic */
-#define AUDIT_MAC_CIPSOV4_ADD	1407	/* NetLabel: add CIPSOv4 DOI entry */
-#define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
-#define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
-#define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
-#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
-#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
-#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
-#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
-#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
-#define AUDIT_MAC_UNLBL_STCADD	1416	/* NetLabel: add a static label */
-#define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
-
-#define AUDIT_FIRST_KERN_ANOM_MSG   1700
-#define AUDIT_LAST_KERN_ANOM_MSG    1799
-#define AUDIT_ANOM_PROMISCUOUS      1700 /* Device changed promiscuous mode */
-#define AUDIT_ANOM_ABEND            1701 /* Process ended abnormally */
-#define AUDIT_ANOM_LINK		    1702 /* Suspicious use of file links */
-#define AUDIT_INTEGRITY_DATA	    1800 /* Data integrity verification */
-#define AUDIT_INTEGRITY_METADATA    1801 /* Metadata integrity verification */
-#define AUDIT_INTEGRITY_STATUS	    1802 /* Integrity enable status */
-#define AUDIT_INTEGRITY_HASH	    1803 /* Integrity HASH type */
-#define AUDIT_INTEGRITY_PCR	    1804 /* PCR invalidation msgs */
-#define AUDIT_INTEGRITY_RULE	    1805 /* policy rule */
-
-#define AUDIT_KERNEL		2000	/* Asynchronous audit record. NOT A REQUEST. */
-
-/* Rule flags */
-#define AUDIT_FILTER_USER	0x00	/* Apply rule to user-generated messages */
-#define AUDIT_FILTER_TASK	0x01	/* Apply rule at task creation (not syscall) */
-#define AUDIT_FILTER_ENTRY	0x02	/* Apply rule at syscall entry */
-#define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
-#define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
-#define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
-
-#define AUDIT_NR_FILTERS	6
-
-#define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
-
-/* Rule actions */
-#define AUDIT_NEVER    0	/* Do not build context if rule matches */
-#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
-#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
-
-/* Rule structure sizes -- if these change, different AUDIT_ADD and
- * AUDIT_LIST commands must be implemented. */
-#define AUDIT_MAX_FIELDS   64
-#define AUDIT_MAX_KEY_LEN  256
-#define AUDIT_BITMASK_SIZE 64
-#define AUDIT_WORD(nr) ((__u32)((nr)/32))
-#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
-
-#define AUDIT_SYSCALL_CLASSES 16
-#define AUDIT_CLASS_DIR_WRITE 0
-#define AUDIT_CLASS_DIR_WRITE_32 1
-#define AUDIT_CLASS_CHATTR 2
-#define AUDIT_CLASS_CHATTR_32 3
-#define AUDIT_CLASS_READ 4
-#define AUDIT_CLASS_READ_32 5
-#define AUDIT_CLASS_WRITE 6
-#define AUDIT_CLASS_WRITE_32 7
-#define AUDIT_CLASS_SIGNAL 8
-#define AUDIT_CLASS_SIGNAL_32 9
-
-/* This bitmask is used to validate user input.  It represents all bits that
- * are currently used in an audit field constant understood by the kernel.
- * If you are adding a new #define AUDIT_<whatever>, please ensure that
- * AUDIT_UNUSED_BITS is updated if need be. */
-#define AUDIT_UNUSED_BITS	0x07FFFC00
-
-/* AUDIT_FIELD_COMPARE rule list */
-#define AUDIT_COMPARE_UID_TO_OBJ_UID	1
-#define AUDIT_COMPARE_GID_TO_OBJ_GID	2
-#define AUDIT_COMPARE_EUID_TO_OBJ_UID	3
-#define AUDIT_COMPARE_EGID_TO_OBJ_GID	4
-#define AUDIT_COMPARE_AUID_TO_OBJ_UID	5
-#define AUDIT_COMPARE_SUID_TO_OBJ_UID	6
-#define AUDIT_COMPARE_SGID_TO_OBJ_GID	7
-#define AUDIT_COMPARE_FSUID_TO_OBJ_UID	8
-#define AUDIT_COMPARE_FSGID_TO_OBJ_GID	9
-
-#define AUDIT_COMPARE_UID_TO_AUID	10
-#define AUDIT_COMPARE_UID_TO_EUID	11
-#define AUDIT_COMPARE_UID_TO_FSUID	12
-#define AUDIT_COMPARE_UID_TO_SUID	13
-
-#define AUDIT_COMPARE_AUID_TO_FSUID	14
-#define AUDIT_COMPARE_AUID_TO_SUID	15
-#define AUDIT_COMPARE_AUID_TO_EUID	16
-
-#define AUDIT_COMPARE_EUID_TO_SUID	17
-#define AUDIT_COMPARE_EUID_TO_FSUID	18
-
-#define AUDIT_COMPARE_SUID_TO_FSUID	19
-
-#define AUDIT_COMPARE_GID_TO_EGID	20
-#define AUDIT_COMPARE_GID_TO_FSGID	21
-#define AUDIT_COMPARE_GID_TO_SGID	22
-
-#define AUDIT_COMPARE_EGID_TO_FSGID	23
-#define AUDIT_COMPARE_EGID_TO_SGID	24
-#define AUDIT_COMPARE_SGID_TO_FSGID	25
-
-#define AUDIT_MAX_FIELD_COMPARE		AUDIT_COMPARE_SGID_TO_FSGID
-
-/* Rule fields */
-				/* These are useful when checking the
-				 * task structure at task creation time
-				 * (AUDIT_PER_TASK).  */
-#define AUDIT_PID	0
-#define AUDIT_UID	1
-#define AUDIT_EUID	2
-#define AUDIT_SUID	3
-#define AUDIT_FSUID	4
-#define AUDIT_GID	5
-#define AUDIT_EGID	6
-#define AUDIT_SGID	7
-#define AUDIT_FSGID	8
-#define AUDIT_LOGINUID	9
-#define AUDIT_PERS	10
-#define AUDIT_ARCH	11
-#define AUDIT_MSGTYPE	12
-#define AUDIT_SUBJ_USER	13	/* security label user */
-#define AUDIT_SUBJ_ROLE	14	/* security label role */
-#define AUDIT_SUBJ_TYPE	15	/* security label type */
-#define AUDIT_SUBJ_SEN	16	/* security label sensitivity label */
-#define AUDIT_SUBJ_CLR	17	/* security label clearance label */
-#define AUDIT_PPID	18
-#define AUDIT_OBJ_USER	19
-#define AUDIT_OBJ_ROLE	20
-#define AUDIT_OBJ_TYPE	21
-#define AUDIT_OBJ_LEV_LOW	22
-#define AUDIT_OBJ_LEV_HIGH	23
-
-				/* These are ONLY useful when checking
-				 * at syscall exit time (AUDIT_AT_EXIT). */
-#define AUDIT_DEVMAJOR	100
-#define AUDIT_DEVMINOR	101
-#define AUDIT_INODE	102
-#define AUDIT_EXIT	103
-#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
-#define AUDIT_WATCH	105
-#define AUDIT_PERM	106
-#define AUDIT_DIR	107
-#define AUDIT_FILETYPE	108
-#define AUDIT_OBJ_UID	109
-#define AUDIT_OBJ_GID	110
-#define AUDIT_FIELD_COMPARE	111
-
-#define AUDIT_ARG0      200
-#define AUDIT_ARG1      (AUDIT_ARG0+1)
-#define AUDIT_ARG2      (AUDIT_ARG0+2)
-#define AUDIT_ARG3      (AUDIT_ARG0+3)
-
-#define AUDIT_FILTERKEY	210
-
-#define AUDIT_NEGATE			0x80000000
-
-/* These are the supported operators.
- *	4  2  1  8
- *	=  >  <  ?
- *	----------
- *	0  0  0	 0	00	nonsense
- *	0  0  0	 1	08	&  bit mask
- *	0  0  1	 0	10	<
- *	0  1  0	 0	20	>
- *	0  1  1	 0	30	!=
- *	1  0  0	 0	40	=
- *	1  0  0	 1	48	&=  bit test
- *	1  0  1	 0	50	<=
- *	1  1  0	 0	60	>=
- *	1  1  1	 1	78	all operators
- */
-#define AUDIT_BIT_MASK			0x08000000
-#define AUDIT_LESS_THAN			0x10000000
-#define AUDIT_GREATER_THAN		0x20000000
-#define AUDIT_NOT_EQUAL			0x30000000
-#define AUDIT_EQUAL			0x40000000
-#define AUDIT_BIT_TEST			(AUDIT_BIT_MASK|AUDIT_EQUAL)
-#define AUDIT_LESS_THAN_OR_EQUAL	(AUDIT_LESS_THAN|AUDIT_EQUAL)
-#define AUDIT_GREATER_THAN_OR_EQUAL	(AUDIT_GREATER_THAN|AUDIT_EQUAL)
-#define AUDIT_OPERATORS			(AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
-
-enum {
-	Audit_equal,
-	Audit_not_equal,
-	Audit_bitmask,
-	Audit_bittest,
-	Audit_lt,
-	Audit_gt,
-	Audit_le,
-	Audit_ge,
-	Audit_bad
-};
-
-/* Status symbols */
-				/* Mask values */
-#define AUDIT_STATUS_ENABLED		0x0001
-#define AUDIT_STATUS_FAILURE		0x0002
-#define AUDIT_STATUS_PID		0x0004
-#define AUDIT_STATUS_RATE_LIMIT		0x0008
-#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
-				/* Failure-to-log actions */
-#define AUDIT_FAIL_SILENT	0
-#define AUDIT_FAIL_PRINTK	1
-#define AUDIT_FAIL_PANIC	2
-
-/* distinguish syscall tables */
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE	   0x40000000
-#define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARMEB	(EM_ARM)
-#define AUDIT_ARCH_CRIS		(EM_CRIS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_FRV		(EM_FRV)
-#define AUDIT_ARCH_H8300	(EM_H8_300)
-#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_IA64		(EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_M32R		(EM_M32R)
-#define AUDIT_ARCH_M68K		(EM_68K)
-#define AUDIT_ARCH_MIPS		(EM_MIPS)
-#define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_OPENRISC	(EM_OPENRISC)
-#define AUDIT_ARCH_PARISC	(EM_PARISC)
-#define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_PPC		(EM_PPC)
-#define AUDIT_ARCH_PPC64	(EM_PPC64|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_S390		(EM_S390)
-#define AUDIT_ARCH_S390X	(EM_S390|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SH		(EM_SH)
-#define AUDIT_ARCH_SHEL		(EM_SH|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SH64		(EM_SH|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SPARC	(EM_SPARC)
-#define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-
-#define AUDIT_PERM_EXEC		1
-#define AUDIT_PERM_WRITE	2
-#define AUDIT_PERM_READ		4
-#define AUDIT_PERM_ATTR		8
-
-struct audit_status {
-	__u32		mask;		/* Bit mask for valid entries */
-	__u32		enabled;	/* 1 = enabled, 0 = disabled */
-	__u32		failure;	/* Failure-to-log action */
-	__u32		pid;		/* pid of auditd process */
-	__u32		rate_limit;	/* messages rate limit (per second) */
-	__u32		backlog_limit;	/* waiting messages limit */
-	__u32		lost;		/* messages lost */
-	__u32		backlog;	/* messages waiting in queue */
-};
-
-struct audit_tty_status {
-	__u32		enabled; /* 1 = enabled, 0 = disabled */
-};
-
-/* audit_rule_data supports filter rules with both integer and string
- * fields.  It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
- * AUDIT_LIST_RULES requests.
- */
-struct audit_rule_data {
-	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
-	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
-	__u32		field_count;
-	__u32		mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
-	__u32		fields[AUDIT_MAX_FIELDS];
-	__u32		values[AUDIT_MAX_FIELDS];
-	__u32		fieldflags[AUDIT_MAX_FIELDS];
-	__u32		buflen;	/* total length of string fields */
-	char		buf[0];	/* string fields buffer */
-};
-
-/* audit_rule is supported to maintain backward compatibility with
- * userspace.  It supports integer fields only and corresponds to
- * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
- */
-struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
-	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
-	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
-	__u32		field_count;
-	__u32		mask[AUDIT_BITMASK_SIZE];
-	__u32		fields[AUDIT_MAX_FIELDS];
-	__u32		values[AUDIT_MAX_FIELDS];
-};
-
-#ifdef __KERNEL__
 #include <linux/sched.h>
+#include <uapi/linux/audit.h>
 
 struct audit_sig_info {
 	uid_t		uid;
@@ -860,4 +482,3 @@ static inline void audit_log_string(struct audit_buffer *ab, const char *buf)
 }
 
 #endif
-#endif
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
index da64e15004b642b97d2d31da90231115fd2332ef..fcd704d354c4c345d0c91aa4ebcb2f811b3851fa 100644
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -10,77 +10,11 @@
  *
  * ----------------------------------------------------------------------- */
 
-
 #ifndef _LINUX_AUTO_FS_H
 #define _LINUX_AUTO_FS_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/fs.h>
 #include <linux/limits.h>
 #include <linux/ioctl.h>
-#else
-#include <sys/ioctl.h>
-#endif /* __KERNEL__ */
-
-/* This file describes autofs v3 */
-#define AUTOFS_PROTO_VERSION	3
-
-/* Range of protocol versions defined */
-#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
-#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
-
-/*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this.  This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode     32 bit    64 bit
- * -------------------------
- * int      32 bit    32 bit
- * long     32 bit    64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
- */
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
-typedef unsigned long autofs_wqt_t;
-#endif
-
-/* Packet types */
-#define autofs_ptype_missing	0	/* Missing entry (mount request) */
-#define autofs_ptype_expire	1	/* Expire entry (umount request) */
-
-struct autofs_packet_hdr {
-	int proto_version;		/* Protocol version */
-	int type;			/* Type of packet */
-};
-
-struct autofs_packet_missing {
-	struct autofs_packet_hdr hdr;
-        autofs_wqt_t wait_queue_token;
-	int len;
-	char name[NAME_MAX+1];
-};	
-
-/* v3 expire (via ioctl) */
-struct autofs_packet_expire {
-	struct autofs_packet_hdr hdr;
-	int len;
-	char name[NAME_MAX+1];
-};
-
-#define AUTOFS_IOC_READY      _IO(0x93,0x60)
-#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
-#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
-#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
-#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
-#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
-#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
-
+#include <uapi/linux/auto_fs.h>
 #endif /* _LINUX_AUTO_FS_H */
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index f3b5d4e3a2ac43eb1b529802122cb38c7898827b..669fef5c745a3fe98145a87d21a588cb64835c15 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -1,39 +1,8 @@
 #ifndef _LINUX_AUXVEC_H
 #define _LINUX_AUXVEC_H
 
-#include <asm/auxvec.h>
+#include <uapi/linux/auxvec.h>
 
-/* Symbolic values for the entries in the auxiliary table
-   put on the initial stack */
-#define AT_NULL   0	/* end of vector */
-#define AT_IGNORE 1	/* entry should be ignored */
-#define AT_EXECFD 2	/* file descriptor of program */
-#define AT_PHDR   3	/* program headers for program */
-#define AT_PHENT  4	/* size of program header entry */
-#define AT_PHNUM  5	/* number of program headers */
-#define AT_PAGESZ 6	/* system page size */
-#define AT_BASE   7	/* base address of interpreter */
-#define AT_FLAGS  8	/* flags */
-#define AT_ENTRY  9	/* entry point of program */
-#define AT_NOTELF 10	/* program is not ELF */
-#define AT_UID    11	/* real uid */
-#define AT_EUID   12	/* effective uid */
-#define AT_GID    13	/* real gid */
-#define AT_EGID   14	/* effective gid */
-#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
-#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
-#define AT_CLKTCK 17	/* frequency at which times() increments */
-/* AT_* values 18 through 22 are reserved */
-#define AT_SECURE 23   /* secure mode boolean */
-#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
-				 * differ from AT_PLATFORM. */
-#define AT_RANDOM 25	/* address of 16 random bytes */
-
-#define AT_EXECFN  31	/* filename of program */
-
-#ifdef __KERNEL__
 #define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */
   /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
-#endif
-
 #endif /* _LINUX_AUXVEC_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 26531f32bbb2d29793979c1c240642f9463073e5..cfcc6bfcaec062f30d7c9eff3f4297a7fc042f33 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -1,26 +1,10 @@
 #ifndef _LINUX_BINFMTS_H
 #define _LINUX_BINFMTS_H
 
-#include <linux/capability.h>
-
-struct pt_regs;
-
-/*
- * These are the maximum length and maximum number of strings passed to the
- * execve() system call.  MAX_ARG_STRLEN is essentially random but serves to
- * prevent the kernel from being unduly impacted by misaddressed pointers.
- * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
- */
-#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
-#define MAX_ARG_STRINGS 0x7FFFFFFF
-
-/* sizeof(linux_binprm->buf) */
-#define BINPRM_BUF_SIZE 128
-
-#ifdef __KERNEL__
 #include <linux/sched.h>
 #include <linux/unistd.h>
 #include <asm/exec.h>
+#include <uapi/linux/binfmts.h>
 
 #define CORENAME_MAX_SIZE 128
 
@@ -141,5 +125,4 @@ extern void free_bprm(struct linux_binprm *);
 extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn;
 #endif
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 4d1a0748eaf8721c0cd4a34c0baf29ce455fc2d2..7c2e030e72f10542612ba34ce79b18f6b1b8ad06 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -1,150 +1,11 @@
 #ifndef BLKTRACE_H
 #define BLKTRACE_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/blkdev.h>
 #include <linux/relay.h>
 #include <linux/compat.h>
-#endif
-
-/*
- * Trace categories
- */
-enum blktrace_cat {
-	BLK_TC_READ	= 1 << 0,	/* reads */
-	BLK_TC_WRITE	= 1 << 1,	/* writes */
-	BLK_TC_FLUSH	= 1 << 2,	/* flush */
-	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
-	BLK_TC_SYNCIO	= BLK_TC_SYNC,
-	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
-	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
-	BLK_TC_ISSUE	= 1 << 6,	/* issue */
-	BLK_TC_COMPLETE	= 1 << 7,	/* completions */
-	BLK_TC_FS	= 1 << 8,	/* fs requests */
-	BLK_TC_PC	= 1 << 9,	/* pc requests */
-	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
-	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
-	BLK_TC_META	= 1 << 12,	/* metadata */
-	BLK_TC_DISCARD	= 1 << 13,	/* discard requests */
-	BLK_TC_DRV_DATA	= 1 << 14,	/* binary per-driver data */
-	BLK_TC_FUA	= 1 << 15,	/* fua requests */
-
-	BLK_TC_END	= 1 << 15,	/* we've run out of bits! */
-};
-
-#define BLK_TC_SHIFT		(16)
-#define BLK_TC_ACT(act)		((act) << BLK_TC_SHIFT)
-
-/*
- * Basic trace actions
- */
-enum blktrace_act {
-	__BLK_TA_QUEUE = 1,		/* queued */
-	__BLK_TA_BACKMERGE,		/* back merged to existing rq */
-	__BLK_TA_FRONTMERGE,		/* front merge to existing rq */
-	__BLK_TA_GETRQ,			/* allocated new request */
-	__BLK_TA_SLEEPRQ,		/* sleeping on rq allocation */
-	__BLK_TA_REQUEUE,		/* request requeued */
-	__BLK_TA_ISSUE,			/* sent to driver */
-	__BLK_TA_COMPLETE,		/* completed by driver */
-	__BLK_TA_PLUG,			/* queue was plugged */
-	__BLK_TA_UNPLUG_IO,		/* queue was unplugged by io */
-	__BLK_TA_UNPLUG_TIMER,		/* queue was unplugged by timer */
-	__BLK_TA_INSERT,		/* insert request */
-	__BLK_TA_SPLIT,			/* bio was split */
-	__BLK_TA_BOUNCE,		/* bio was bounced */
-	__BLK_TA_REMAP,			/* bio was remapped */
-	__BLK_TA_ABORT,			/* request aborted */
-	__BLK_TA_DRV_DATA,		/* driver-specific binary data */
-};
-
-/*
- * Notify events.
- */
-enum blktrace_notify {
-	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
-	__BLK_TN_TIMESTAMP,		/* include system clock */
-	__BLK_TN_MESSAGE,		/* Character string message */
-};
-
-
-/*
- * Trace actions in full. Additionally, read or write is masked
- */
-#define BLK_TA_QUEUE		(__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_BACKMERGE	(__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_FRONTMERGE	(__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_GETRQ		(__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_SLEEPRQ		(__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_REQUEUE		(__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
-#define BLK_TA_ISSUE		(__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
-#define BLK_TA_COMPLETE		(__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
-#define BLK_TA_PLUG		(__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_IO	(__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_TIMER	(__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_INSERT		(__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_SPLIT		(__BLK_TA_SPLIT)
-#define BLK_TA_BOUNCE		(__BLK_TA_BOUNCE)
-#define BLK_TA_REMAP		(__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_ABORT		(__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_DRV_DATA	(__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
-
-#define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
-
-#define BLK_IO_TRACE_MAGIC	0x65617400
-#define BLK_IO_TRACE_VERSION	0x07
-
-/*
- * The trace itself
- */
-struct blk_io_trace {
-	__u32 magic;		/* MAGIC << 8 | version */
-	__u32 sequence;		/* event number */
-	__u64 time;		/* in microseconds */
-	__u64 sector;		/* disk offset */
-	__u32 bytes;		/* transfer length */
-	__u32 action;		/* what happened */
-	__u32 pid;		/* who did it */
-	__u32 device;		/* device number */
-	__u32 cpu;		/* on what cpu did it happen */
-	__u16 error;		/* completion error */
-	__u16 pdu_len;		/* length of data after this trace */
-};
-
-/*
- * The remap event
- */
-struct blk_io_trace_remap {
-	__be32 device_from;
-	__be32 device_to;
-	__be64 sector_from;
-};
-
-enum {
-	Blktrace_setup = 1,
-	Blktrace_running,
-	Blktrace_stopped,
-};
-
-#define BLKTRACE_BDEV_SIZE	32
-
-/*
- * User setup structure passed with BLKTRACESTART
- */
-struct blk_user_trace_setup {
-	char name[BLKTRACE_BDEV_SIZE];	/* output */
-	__u16 act_mask;			/* input */
-	__u32 buf_size;			/* input */
-	__u32 buf_nr;			/* input */
-	__u64 start_lba;
-	__u64 end_lba;
-	__u32 pid;
-};
+#include <uapi/linux/blktrace_api.h>
 
-#ifdef __KERNEL__
 #if defined(CONFIG_BLK_DEV_IO_TRACE)
 
 #include <linux/sysfs.h>
@@ -250,5 +111,4 @@ extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes);
 
 #endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/bsg.h b/include/linux/bsg.h
index ecb4730d0868504d1ed9d0cb58a3522c38073695..7173f6e9d2dd55fbcba32070b15194f8538b9b1c 100644
--- a/include/linux/bsg.h
+++ b/include/linux/bsg.h
@@ -1,67 +1,8 @@
 #ifndef BSG_H
 #define BSG_H
 
-#include <linux/types.h>
+#include <uapi/linux/bsg.h>
 
-#define BSG_PROTOCOL_SCSI		0
-
-#define BSG_SUB_PROTOCOL_SCSI_CMD	0
-#define BSG_SUB_PROTOCOL_SCSI_TMF	1
-#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
-
-/*
- * For flags member below
- * sg.h sg_io_hdr also has bits defined for it's flags member. However
- * none of these bits are implemented/used by bsg. The bits below are
- * allocated to not conflict with sg.h ones anyway.
- */
-#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
-
-struct sg_io_v4 {
-	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
-	__u32 protocol;		/* [i] 0 -> SCSI , .... */
-	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
-				   management function, .... */
-
-	__u32 request_len;	/* [i] in bytes */
-	__u64 request;		/* [i], [*i] {SCSI: cdb} */
-	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
-	__u32 request_attr;	/* [i] {SCSI: task attribute} */
-	__u32 request_priority;	/* [i] {SCSI: task priority} */
-	__u32 request_extra;	/* [i] {spare, for padding} */
-	__u32 max_response_len;	/* [i] in bytes */
-	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */
-
-        /* "dout_": data out (to device); "din_": data in (from device) */
-	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
-				   dout_xfer points to array of iovec */
-	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
-	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
-	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
-	__u64 dout_xferp;	/* [i], [*i] */
-	__u64 din_xferp;	/* [i], [*o] */
-
-	__u32 timeout;		/* [i] units: millisecond */
-	__u32 flags;		/* [i] bit mask */
-	__u64 usr_ptr;		/* [i->o] unused internally */
-	__u32 spare_in;		/* [i] */
-
-	__u32 driver_status;	/* [o] 0 -> ok */
-	__u32 transport_status;	/* [o] 0 -> ok */
-	__u32 device_status;	/* [o] {SCSI: command completion status} */
-	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
-	__u32 info;		/* [o] additional information */
-	__u32 duration;		/* [o] time to complete, in milliseconds */
-	__u32 response_len;	/* [o] bytes of response actually written */
-	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
-	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
-	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
-	__u32 spare_out;	/* [o] */
-
-	__u32 padding;
-};
-
-#ifdef __KERNEL__
 
 #if defined(CONFIG_BLK_DEV_BSG)
 struct bsg_class_device {
@@ -89,6 +30,4 @@ static inline void bsg_unregister_queue(struct request_queue *q)
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild
index 5896e344ba6c91a1cf7c51a95b8ac57caf0cd9fa..e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 100644
--- a/include/linux/byteorder/Kbuild
+++ b/include/linux/byteorder/Kbuild
@@ -1,2 +0,0 @@
-header-y += big_endian.h
-header-y += little_endian.h
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
index 3c80fd7e8b567c8f6d8cd768c120926a424ec577..392041475c720148c4332b38ea81cd3d1460f425 100644
--- a/include/linux/byteorder/big_endian.h
+++ b/include/linux/byteorder/big_endian.h
@@ -1,108 +1,7 @@
 #ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
 #define _LINUX_BYTEORDER_BIG_ENDIAN_H
 
-#ifndef __BIG_ENDIAN
-#define __BIG_ENDIAN 4321
-#endif
-#ifndef __BIG_ENDIAN_BITFIELD
-#define __BIG_ENDIAN_BITFIELD
-#endif
+#include <uapi/linux/byteorder/big_endian.h>
 
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#define __constant_htonl(x) ((__force __be32)(__u32)(x))
-#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
-#define __constant_htons(x) ((__force __be16)(__u16)(x))
-#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
-#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
-#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
-#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
-#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
-#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
-#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
-#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
-#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
-#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
-#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
-#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
-#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
-#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
-#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
-#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
-#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
-#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
-#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
-#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
-#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
-#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
-#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
-#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
-#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
-
-static inline __le64 __cpu_to_le64p(const __u64 *p)
-{
-	return (__force __le64)__swab64p(p);
-}
-static inline __u64 __le64_to_cpup(const __le64 *p)
-{
-	return __swab64p((__u64 *)p);
-}
-static inline __le32 __cpu_to_le32p(const __u32 *p)
-{
-	return (__force __le32)__swab32p(p);
-}
-static inline __u32 __le32_to_cpup(const __le32 *p)
-{
-	return __swab32p((__u32 *)p);
-}
-static inline __le16 __cpu_to_le16p(const __u16 *p)
-{
-	return (__force __le16)__swab16p(p);
-}
-static inline __u16 __le16_to_cpup(const __le16 *p)
-{
-	return __swab16p((__u16 *)p);
-}
-static inline __be64 __cpu_to_be64p(const __u64 *p)
-{
-	return (__force __be64)*p;
-}
-static inline __u64 __be64_to_cpup(const __be64 *p)
-{
-	return (__force __u64)*p;
-}
-static inline __be32 __cpu_to_be32p(const __u32 *p)
-{
-	return (__force __be32)*p;
-}
-static inline __u32 __be32_to_cpup(const __be32 *p)
-{
-	return (__force __u32)*p;
-}
-static inline __be16 __cpu_to_be16p(const __u16 *p)
-{
-	return (__force __be16)*p;
-}
-static inline __u16 __be16_to_cpup(const __be16 *p)
-{
-	return (__force __u16)*p;
-}
-#define __cpu_to_le64s(x) __swab64s((x))
-#define __le64_to_cpus(x) __swab64s((x))
-#define __cpu_to_le32s(x) __swab32s((x))
-#define __le32_to_cpus(x) __swab32s((x))
-#define __cpu_to_le16s(x) __swab16s((x))
-#define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do { (void)(x); } while (0)
-#define __be64_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be32s(x) do { (void)(x); } while (0)
-#define __be32_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be16s(x) do { (void)(x); } while (0)
-#define __be16_to_cpus(x) do { (void)(x); } while (0)
-
-#ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
-#endif
-
 #endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
index 83195fb82962838fa8d4c70ea77927ac0b7ac7e2..08057377aa23299d59c281ff09030c091392f844 100644
--- a/include/linux/byteorder/little_endian.h
+++ b/include/linux/byteorder/little_endian.h
@@ -1,108 +1,7 @@
 #ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
 #define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
 
-#ifndef __LITTLE_ENDIAN
-#define __LITTLE_ENDIAN 1234
-#endif
-#ifndef __LITTLE_ENDIAN_BITFIELD
-#define __LITTLE_ENDIAN_BITFIELD
-#endif
+#include <uapi/linux/byteorder/little_endian.h>
 
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
-#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
-#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
-#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
-#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
-#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
-#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
-#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
-#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
-#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
-#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
-#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
-#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
-#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
-#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
-#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
-#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
-#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
-#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
-#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
-#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
-#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
-#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
-#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
-
-static inline __le64 __cpu_to_le64p(const __u64 *p)
-{
-	return (__force __le64)*p;
-}
-static inline __u64 __le64_to_cpup(const __le64 *p)
-{
-	return (__force __u64)*p;
-}
-static inline __le32 __cpu_to_le32p(const __u32 *p)
-{
-	return (__force __le32)*p;
-}
-static inline __u32 __le32_to_cpup(const __le32 *p)
-{
-	return (__force __u32)*p;
-}
-static inline __le16 __cpu_to_le16p(const __u16 *p)
-{
-	return (__force __le16)*p;
-}
-static inline __u16 __le16_to_cpup(const __le16 *p)
-{
-	return (__force __u16)*p;
-}
-static inline __be64 __cpu_to_be64p(const __u64 *p)
-{
-	return (__force __be64)__swab64p(p);
-}
-static inline __u64 __be64_to_cpup(const __be64 *p)
-{
-	return __swab64p((__u64 *)p);
-}
-static inline __be32 __cpu_to_be32p(const __u32 *p)
-{
-	return (__force __be32)__swab32p(p);
-}
-static inline __u32 __be32_to_cpup(const __be32 *p)
-{
-	return __swab32p((__u32 *)p);
-}
-static inline __be16 __cpu_to_be16p(const __u16 *p)
-{
-	return (__force __be16)__swab16p(p);
-}
-static inline __u16 __be16_to_cpup(const __be16 *p)
-{
-	return __swab16p((__u16 *)p);
-}
-#define __cpu_to_le64s(x) do { (void)(x); } while (0)
-#define __le64_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_le32s(x) do { (void)(x); } while (0)
-#define __le32_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_le16s(x) do { (void)(x); } while (0)
-#define __le16_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be64s(x) __swab64s((x))
-#define __be64_to_cpus(x) __swab64s((x))
-#define __cpu_to_be32s(x) __swab32s((x))
-#define __be32_to_cpus(x) __swab32s((x))
-#define __cpu_to_be16s(x) __swab16s((x))
-#define __be16_to_cpus(x) __swab16s((x))
-
-#ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
-#endif
-
 #endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/capability.h b/include/linux/capability.h
index d10b7ed595b15c07c58f30e08ca841dafb2aa0a1..98503b7923698e3b527dc278aa32d5db1da1dfe1 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -9,82 +9,11 @@
  *
  * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
  */
-
 #ifndef _LINUX_CAPABILITY_H
 #define _LINUX_CAPABILITY_H
 
-#include <linux/types.h>
-
-struct task_struct;
-
-/* User-level do most of the mapping between kernel and user
-   capabilities based on the version tag given by the kernel. The
-   kernel might be somewhat backwards compatible, but don't bet on
-   it. */
-
-/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
-   a set of three capability sets.  The transposition of 3*the
-   following structure to such a composite is better handled in a user
-   library since the draft standard requires the use of malloc/free
-   etc.. */
-
-#define _LINUX_CAPABILITY_VERSION_1  0x19980330
-#define _LINUX_CAPABILITY_U32S_1     1
-
-#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
-#define _LINUX_CAPABILITY_U32S_2     2
-
-#define _LINUX_CAPABILITY_VERSION_3  0x20080522
-#define _LINUX_CAPABILITY_U32S_3     2
-
-typedef struct __user_cap_header_struct {
-	__u32 version;
-	int pid;
-} __user *cap_user_header_t;
-
-typedef struct __user_cap_data_struct {
-        __u32 effective;
-        __u32 permitted;
-        __u32 inheritable;
-} __user *cap_user_data_t;
-
-
-#define VFS_CAP_REVISION_MASK	0xFF000000
-#define VFS_CAP_REVISION_SHIFT	24
-#define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
-#define VFS_CAP_FLAGS_EFFECTIVE	0x000001
-
-#define VFS_CAP_REVISION_1	0x01000000
-#define VFS_CAP_U32_1           1
-#define XATTR_CAPS_SZ_1         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
-
-#define VFS_CAP_REVISION_2	0x02000000
-#define VFS_CAP_U32_2           2
-#define XATTR_CAPS_SZ_2         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
+#include <uapi/linux/capability.h>
 
-#define XATTR_CAPS_SZ           XATTR_CAPS_SZ_2
-#define VFS_CAP_U32             VFS_CAP_U32_2
-#define VFS_CAP_REVISION	VFS_CAP_REVISION_2
-
-struct vfs_cap_data {
-	__le32 magic_etc;            /* Little endian */
-	struct {
-		__le32 permitted;    /* Little endian */
-		__le32 inheritable;  /* Little endian */
-	} data[VFS_CAP_U32];
-};
-
-#ifndef __KERNEL__
-
-/*
- * Backwardly compatible definition for source code - trapped in a
- * 32-bit world. If you find you need this, please consider using
- * libcap to untrap yourself...
- */
-#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
-#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
-
-#else
 
 #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
 #define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
@@ -105,277 +34,6 @@ struct cpu_vfs_cap_data {
 #define _USER_CAP_HEADER_SIZE  (sizeof(struct __user_cap_header_struct))
 #define _KERNEL_CAP_T_SIZE     (sizeof(kernel_cap_t))
 
-#endif
-
-
-/**
- ** POSIX-draft defined capabilities.
- **/
-
-/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
-   overrides the restriction of changing file ownership and group
-   ownership. */
-
-#define CAP_CHOWN            0
-
-/* Override all DAC access, including ACL execute access if
-   [_POSIX_ACL] is defined. Excluding DAC access covered by
-   CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_OVERRIDE     1
-
-/* Overrides all DAC restrictions regarding read and search on files
-   and directories, including ACL restrictions if [_POSIX_ACL] is
-   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_READ_SEARCH  2
-
-/* Overrides all restrictions about allowed operations on files, where
-   file owner ID must be equal to the user ID, except where CAP_FSETID
-   is applicable. It doesn't override MAC and DAC restrictions. */
-
-#define CAP_FOWNER           3
-
-/* Overrides the following restrictions that the effective user ID
-   shall match the file owner ID when setting the S_ISUID and S_ISGID
-   bits on that file; that the effective group ID (or one of the
-   supplementary group IDs) shall match the file owner ID when setting
-   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
-   cleared on successful return from chown(2) (not implemented). */
-
-#define CAP_FSETID           4
-
-/* Overrides the restriction that the real or effective user ID of a
-   process sending a signal must match the real or effective user ID
-   of the process receiving the signal. */
-
-#define CAP_KILL             5
-
-/* Allows setgid(2) manipulation */
-/* Allows setgroups(2) */
-/* Allows forged gids on socket credentials passing. */
-
-#define CAP_SETGID           6
-
-/* Allows set*uid(2) manipulation (including fsuid). */
-/* Allows forged pids on socket credentials passing. */
-
-#define CAP_SETUID           7
-
-
-/**
- ** Linux-specific capabilities
- **/
-
-/* Without VFS support for capabilities:
- *   Transfer any capability in your permitted set to any pid,
- *   remove any capability in your permitted set from any pid
- * With VFS support for capabilities (neither of above, but)
- *   Add any capability from current's capability bounding set
- *       to the current process' inheritable set
- *   Allow taking bits out of capability bounding set
- *   Allow modification of the securebits for a process
- */
-
-#define CAP_SETPCAP          8
-
-/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
-
-#define CAP_LINUX_IMMUTABLE  9
-
-/* Allows binding to TCP/UDP sockets below 1024 */
-/* Allows binding to ATM VCIs below 32 */
-
-#define CAP_NET_BIND_SERVICE 10
-
-/* Allow broadcasting, listen to multicast */
-
-#define CAP_NET_BROADCAST    11
-
-/* Allow interface configuration */
-/* Allow administration of IP firewall, masquerading and accounting */
-/* Allow setting debug option on sockets */
-/* Allow modification of routing tables */
-/* Allow setting arbitrary process / process group ownership on
-   sockets */
-/* Allow binding to any address for transparent proxying (also via NET_RAW) */
-/* Allow setting TOS (type of service) */
-/* Allow setting promiscuous mode */
-/* Allow clearing driver statistics */
-/* Allow multicasting */
-/* Allow read/write of device-specific registers */
-/* Allow activation of ATM control sockets */
-
-#define CAP_NET_ADMIN        12
-
-/* Allow use of RAW sockets */
-/* Allow use of PACKET sockets */
-/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
-
-#define CAP_NET_RAW          13
-
-/* Allow locking of shared memory segments */
-/* Allow mlock and mlockall (which doesn't really have anything to do
-   with IPC) */
-
-#define CAP_IPC_LOCK         14
-
-/* Override IPC ownership checks */
-
-#define CAP_IPC_OWNER        15
-
-/* Insert and remove kernel modules - modify kernel without limit */
-#define CAP_SYS_MODULE       16
-
-/* Allow ioperm/iopl access */
-/* Allow sending USB messages to any device via /proc/bus/usb */
-
-#define CAP_SYS_RAWIO        17
-
-/* Allow use of chroot() */
-
-#define CAP_SYS_CHROOT       18
-
-/* Allow ptrace() of any process */
-
-#define CAP_SYS_PTRACE       19
-
-/* Allow configuration of process accounting */
-
-#define CAP_SYS_PACCT        20
-
-/* Allow configuration of the secure attention key */
-/* Allow administration of the random device */
-/* Allow examination and configuration of disk quotas */
-/* Allow setting the domainname */
-/* Allow setting the hostname */
-/* Allow calling bdflush() */
-/* Allow mount() and umount(), setting up new smb connection */
-/* Allow some autofs root ioctls */
-/* Allow nfsservctl */
-/* Allow VM86_REQUEST_IRQ */
-/* Allow to read/write pci config on alpha */
-/* Allow irix_prctl on mips (setstacksize) */
-/* Allow flushing all cache on m68k (sys_cacheflush) */
-/* Allow removing semaphores */
-/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
-   and shared memory */
-/* Allow locking/unlocking of shared memory segment */
-/* Allow turning swap on/off */
-/* Allow forged pids on socket credentials passing */
-/* Allow setting readahead and flushing buffers on block devices */
-/* Allow setting geometry in floppy driver */
-/* Allow turning DMA on/off in xd driver */
-/* Allow administration of md devices (mostly the above, but some
-   extra ioctls) */
-/* Allow tuning the ide driver */
-/* Allow access to the nvram device */
-/* Allow administration of apm_bios, serial and bttv (TV) device */
-/* Allow manufacturer commands in isdn CAPI support driver */
-/* Allow reading non-standardized portions of pci configuration space */
-/* Allow DDI debug ioctl on sbpcd driver */
-/* Allow setting up serial ports */
-/* Allow sending raw qic-117 commands */
-/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
-   arbitrary SCSI commands */
-/* Allow setting encryption key on loopback filesystem */
-/* Allow setting zone reclaim policy */
-
-#define CAP_SYS_ADMIN        21
-
-/* Allow use of reboot() */
-
-#define CAP_SYS_BOOT         22
-
-/* Allow raising priority and setting priority on other (different
-   UID) processes */
-/* Allow use of FIFO and round-robin (realtime) scheduling on own
-   processes and setting the scheduling algorithm used by another
-   process. */
-/* Allow setting cpu affinity on other processes */
-
-#define CAP_SYS_NICE         23
-
-/* Override resource limits. Set resource limits. */
-/* Override quota limits. */
-/* Override reserved space on ext2 filesystem */
-/* Modify data journaling mode on ext3 filesystem (uses journaling
-   resources) */
-/* NOTE: ext2 honors fsuid when checking for resource overrides, so
-   you can override using fsuid too */
-/* Override size restrictions on IPC message queues */
-/* Allow more than 64hz interrupts from the real-time clock */
-/* Override max number of consoles on console allocation */
-/* Override max number of keymaps */
-
-#define CAP_SYS_RESOURCE     24
-
-/* Allow manipulation of system clock */
-/* Allow irix_stime on mips */
-/* Allow setting the real-time clock */
-
-#define CAP_SYS_TIME         25
-
-/* Allow configuration of tty devices */
-/* Allow vhangup() of tty */
-
-#define CAP_SYS_TTY_CONFIG   26
-
-/* Allow the privileged aspects of mknod() */
-
-#define CAP_MKNOD            27
-
-/* Allow taking of leases on files */
-
-#define CAP_LEASE            28
-
-#define CAP_AUDIT_WRITE      29
-
-#define CAP_AUDIT_CONTROL    30
-
-#define CAP_SETFCAP	     31
-
-/* Override MAC access.
-   The base kernel enforces no MAC policy.
-   An LSM may enforce a MAC policy, and if it does and it chooses
-   to implement capability based overrides of that policy, this is
-   the capability it should use to do so. */
-
-#define CAP_MAC_OVERRIDE     32
-
-/* Allow MAC configuration or state changes.
-   The base kernel requires no MAC configuration.
-   An LSM may enforce a MAC policy, and if it does and it chooses
-   to implement capability based checks on modifications to that
-   policy or the data required to maintain it, this is the
-   capability it should use to do so. */
-
-#define CAP_MAC_ADMIN        33
-
-/* Allow configuring the kernel's syslog (printk behaviour) */
-
-#define CAP_SYSLOG           34
-
-/* Allow triggering something that will wake the system */
-
-#define CAP_WAKE_ALARM            35
-
-/* Allow preventing system suspends */
-
-#define CAP_BLOCK_SUSPEND    36
-
-#define CAP_LAST_CAP         CAP_BLOCK_SUSPEND
-
-#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
-
-/*
- * Bit location of each capability (used by user-space library and kernel)
- */
-
-#define CAP_TO_INDEX(x)     ((x) >> 5)        /* 1 << 5 == bits in __u32 */
-#define CAP_TO_MASK(x)      (1 << ((x) & 31)) /* mask for indexed __u32 */
-
-#ifdef __KERNEL__
 
 struct inode;
 struct dentry;
@@ -557,6 +215,4 @@ extern bool inode_capable(const struct inode *inode, int cap);
 /* audit system wants to get cap info from files as well */
 extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
 
-#endif /* __KERNEL__ */
-
 #endif /* !_LINUX_CAPABILITY_H */
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index 986493f5b92ba2c31875c42f78954a5baf4148c4..84b6e2d0f44d491409f92c39e379d17e440e0074 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -1,91 +1,8 @@
 #ifndef CCISS_IOCTLH
 #define CCISS_IOCTLH
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/cciss_defs.h>
+#include <uapi/linux/cciss_ioctl.h>
 
-#define CCISS_IOC_MAGIC 'B'
-
-
-typedef struct _cciss_pci_info_struct
-{
-	unsigned char 	bus;
-	unsigned char 	dev_fn;
-	unsigned short	domain;
-	__u32 		board_id;
-} cciss_pci_info_struct; 
-
-typedef struct _cciss_coalint_struct
-{
-	__u32  delay;
-	__u32  count;
-} cciss_coalint_struct;
-
-typedef char NodeName_type[16];
-
-typedef __u32 Heartbeat_type;
-
-#define CISS_PARSCSIU2 	0x0001
-#define CISS_PARCSCIU3 	0x0002
-#define CISS_FIBRE1G	0x0100
-#define CISS_FIBRE2G	0x0200
-typedef __u32 BusTypes_type;
-
-typedef char FirmwareVer_type[4];
-typedef __u32 DriverVer_type;
-
-#define MAX_KMALLOC_SIZE 128000
-
-typedef struct _IOCTL_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info; 
-  WORD			   buf_size;  /* size in bytes of the buf */
-  BYTE			   __user *buf;
-} IOCTL_Command_struct;
-
-typedef struct _BIG_IOCTL_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info;
-  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
-  DWORD			   buf_size;    /* size in bytes of the buf */
-  				        /* < malloc_size * MAXSGENTRIES */
-  BYTE			   __user *buf;
-} BIG_IOCTL_Command_struct;
-
-typedef struct _LogvolInfo_struct{
-	__u32	LunID;
-	int	num_opens;  /* number of opens on the logical volume */
-	int	num_parts;  /* number of partitions configured on logvol */
-} LogvolInfo_struct;
-
-#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
-
-#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
-#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
-
-#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
-#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
-
-#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
-#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
-#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
-#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
-#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
-#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
-#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
-
-/* no longer used... use REGNEWD instead */ 
-#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
-
-#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
-#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
-#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
-#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 /* 32 bit compatible ioctl structs */
@@ -111,5 +28,4 @@ typedef struct _BIG_IOCTL32_Command_struct {
 #define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
 
 #endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
 #endif  
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index dfd7f187c351440d2ffa81050e46ed2602877f73..8609d577bb66df1a50c92fc6ef2873f30b6f3e30 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -7,910 +7,12 @@
  *               1997, 1998   Erik Andersen, andersee@debian.org
  *               1998-2002    Jens Axboe, axboe@suse.de
  */
- 
 #ifndef	_LINUX_CDROM_H
 #define	_LINUX_CDROM_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*******************************************************
- * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
- * (and only this) include file.  It is my hope to provide Linux with
- * a uniform interface between software accessing CD-ROMs and the various 
- * device drivers that actually talk to the drives.  There may still be
- * 23 different kinds of strange CD-ROM drives, but at least there will 
- * now be one, and only one, Linux CD-ROM interface.
- *
- * Additionally, as of Linux 2.1.x, all Linux application programs 
- * should use the O_NONBLOCK option when opening a CD-ROM device 
- * for subsequent ioctl commands.  This allows for neat system errors 
- * like "No medium found" or "Wrong medium type" upon attempting to 
- * mount or play an empty slot, mount an audio disc, or play a data disc.
- * Generally, changing an application program to support O_NONBLOCK
- * is as easy as the following:
- *       -    drive = open("/dev/cdrom", O_RDONLY);
- *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
- * It is worth the small change.
- *
- *  Patches for many common CD programs (provided by David A. van Leeuwen)
- *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
- * 
- *******************************************************/
-
-/* When a driver supports a certain function, but the cdrom drive we are 
- * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
- * borrow the "Operation not supported" error from the network folks to 
- * accomplish this.  Maybe someday we will get a more targeted error code, 
- * but this will do for now... */
-#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
-
-/*******************************************************
- * The CD-ROM IOCTL commands  -- these should be supported by 
- * all the various cdrom drivers.  For the CD-ROM ioctls, we 
- * will commandeer byte 0x53, or 'S'.
- *******************************************************/
-#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
-#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
-#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
-#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
-                                           (struct cdrom_ti) */
-#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
-                                           (struct cdrom_tochdr) */
-#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
-                                           (struct cdrom_tocentry) */
-#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
-#define CDROMSTART		0x5308 /* Start the cdrom drive */
-#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
-#define CDROMVOLCTRL		0x530a /* Control output volume 
-                                           (struct cdrom_volctrl) */
-#define CDROMSUBCHNL		0x530b /* Read subchannel data 
-                                           (struct cdrom_subchnl) */
-#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
-                                           (struct cdrom_read) */
-#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
-                                           (struct cdrom_read) */
-#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
-#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
-#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
-                                           address of multi session disks 
-                                           (struct cdrom_multisession) */
-#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
-                                           if available (struct cdrom_mcn) */
-#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is deprecated, 
-                                          but here anyway for compatibility */
-#define CDROMRESET		0x5312 /* hard-reset the drive */
-#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
-                                          (struct cdrom_volctrl) */
-#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
-                                           (struct cdrom_read) */
-/* 
- * These ioctls are used only used in aztcd.c and optcd.c
- */
-#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
-#define CDROMSEEK		0x5316  /* seek msf address */
-  
-/*
- * This ioctl is only used by the scsi-cd driver.  
-   It is for playing audio in logical block addressing mode.
- */
-#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
-
-/* 
- * These ioctls are only used in optcd.c
- */
-#define CDROMREADALL		0x5318	/* read all 2646 bytes */
-
-/* 
- * These ioctls are (now) only in ide-cd.c for controlling 
- * drive spindown time.  They should be implemented in the
- * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
- * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
- *  -Erik
- */
-#define CDROMGETSPINDOWN        0x531d
-#define CDROMSETSPINDOWN        0x531e
-
-/* 
- * These ioctls are implemented through the uniform CD-ROM driver
- * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
- * drivers are eventually ported to the uniform CD-ROM driver interface.
- */
-#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
-#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
-#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
-#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
-#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
-#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
-#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
-#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
-#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
-#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
-#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
-#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
-
-/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
- * Future CDROM ioctls should be kept below 0x537F
- */
-
-/* This ioctl is only used by sbpcd at the moment */
-#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
-					/* conflict with SCSI_IOCTL_GET_IDLUN */
-
-/* DVD-ROM Specific ioctls */
-#define DVD_READ_STRUCT		0x5390  /* Read structure */
-#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
-#define DVD_AUTH		0x5392  /* Authentication */
-
-#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
-#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
-#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
-
-/*******************************************************
- * CDROM IOCTL structures
- *******************************************************/
-
-/* Address in MSF format */
-struct cdrom_msf0		
-{
-	__u8	minute;
-	__u8	second;
-	__u8	frame;
-};
-
-/* Address in either MSF or logical format */
-union cdrom_addr		
-{
-	struct cdrom_msf0	msf;
-	int			lba;
-};
-
-/* This struct is used by the CDROMPLAYMSF ioctl */ 
-struct cdrom_msf 
-{
-	__u8	cdmsf_min0;	/* start minute */
-	__u8	cdmsf_sec0;	/* start second */
-	__u8	cdmsf_frame0;	/* start frame */
-	__u8	cdmsf_min1;	/* end minute */
-	__u8	cdmsf_sec1;	/* end second */
-	__u8	cdmsf_frame1;	/* end frame */
-};
-
-/* This struct is used by the CDROMPLAYTRKIND ioctl */
-struct cdrom_ti 
-{
-	__u8	cdti_trk0;	/* start track */
-	__u8	cdti_ind0;	/* start index */
-	__u8	cdti_trk1;	/* end track */
-	__u8	cdti_ind1;	/* end index */
-};
-
-/* This struct is used by the CDROMREADTOCHDR ioctl */
-struct cdrom_tochdr 	
-{
-	__u8	cdth_trk0;	/* start track */
-	__u8	cdth_trk1;	/* end track */
-};
-
-/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
-struct cdrom_volctrl
-{
-	__u8	channel0;
-	__u8	channel1;
-	__u8	channel2;
-	__u8	channel3;
-};
-
-/* This struct is used by the CDROMSUBCHNL ioctl */
-struct cdrom_subchnl 
-{
-	__u8	cdsc_format;
-	__u8	cdsc_audiostatus;
-	__u8	cdsc_adr:	4;
-	__u8	cdsc_ctrl:	4;
-	__u8	cdsc_trk;
-	__u8	cdsc_ind;
-	union cdrom_addr cdsc_absaddr;
-	union cdrom_addr cdsc_reladdr;
-};
-
-
-/* This struct is used by the CDROMREADTOCENTRY ioctl */
-struct cdrom_tocentry 
-{
-	__u8	cdte_track;
-	__u8	cdte_adr	:4;
-	__u8	cdte_ctrl	:4;
-	__u8	cdte_format;
-	union cdrom_addr cdte_addr;
-	__u8	cdte_datamode;
-};
-
-/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
-struct cdrom_read      
-{
-	int	cdread_lba;
-	char 	*cdread_bufaddr;
-	int	cdread_buflen;
-};
-
-/* This struct is used by the CDROMREADAUDIO ioctl */
-struct cdrom_read_audio
-{
-	union cdrom_addr addr; /* frame address */
-	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
-	int nframes;           /* number of 2352-byte-frames to read at once */
-	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
-};
-
-/* This struct is used with the CDROMMULTISESSION ioctl */
-struct cdrom_multisession
-{
-	union cdrom_addr addr; /* frame address: start-of-last-session 
-	                           (not the new "frame 16"!).  Only valid
-	                           if the "xa_flag" is true. */
-	__u8 xa_flag;        /* 1: "is XA disk" */
-	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
-};
-
-/* This struct is used with the CDROM_GET_MCN ioctl.  
- * Very few audio discs actually have Universal Product Code information, 
- * which should just be the Medium Catalog Number on the box.  Also note 
- * that the way the codeis written on CD is _not_ uniform across all discs!
- */  
-struct cdrom_mcn 
-{
-  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
-};
-
-/* This is used by the CDROMPLAYBLK ioctl */
-struct cdrom_blk 
-{
-	unsigned from;
-	unsigned short len;
-};
-
-#define CDROM_PACKET_SIZE	12
-
-#define CGC_DATA_UNKNOWN	0
-#define CGC_DATA_WRITE		1
-#define CGC_DATA_READ		2
-#define CGC_DATA_NONE		3
-
-/* for CDROM_PACKET_COMMAND ioctl */
-struct cdrom_generic_command
-{
-	unsigned char 		cmd[CDROM_PACKET_SIZE];
-	unsigned char		__user *buffer;
-	unsigned int 		buflen;
-	int			stat;
-	struct request_sense	__user *sense;
-	unsigned char		data_direction;
-	int			quiet;
-	int			timeout;
-	void			__user *reserved[1];	/* unused, actually */
-};
-
-/*
- * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
- * 2340, or 2352 bytes long.  
-
-*         Sector types of the standard CD-ROM data formats:
- *
- * format   sector type               user data size (bytes)
- * -----------------------------------------------------------------------------
- *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
- *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
- *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
- *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
- *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
- *
- *
- *       The layout of the standard CD-ROM data formats:
- * -----------------------------------------------------------------------------
- * - audio (red):                  | audio_sample_bytes |
- *                                 |        2352        |
- *
- * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
- *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
- *
- * - data (yellow, mode2):         | sync - head - data |
- *                                 |  12  -   4  - 2336 |
- *
- * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
- *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
- *
- * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
- *                                 |  12  -   4  -  8  - 2324 -  4    |
- *
- */
-
-/* Some generally useful CD-ROM information -- mostly based on the above */
-#define CD_MINS              74 /* max. minutes per CD, not really a limit */
-#define CD_SECS              60 /* seconds per minute */
-#define CD_FRAMES            75 /* frames per second */
-#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
-#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
-#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
-#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
-#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
-#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
-#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
-#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
-#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
-#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
-#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
-#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
-#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
-/* most drives don't deliver everything: */
-#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
-#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
-
-#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
-#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
-#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
-
-/* CD-ROM address types (cdrom_tocentry.cdte_format) */
-#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
-#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
-
-/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
-#define	CDROM_DATA_TRACK	0x04
-
-/* The leadout track is always 0xAA, regardless of # of tracks on disc */
-#define	CDROM_LEADOUT		0xAA
-
-/* audio states (from SCSI-2, but seen with other drives, too) */
-#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
-#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
-#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
-#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
-#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
-#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
-
-/* capability flags used with the uniform CD-ROM driver */ 
-#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
-#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
-#define CDC_LOCK		0x4     /* disable manual eject */
-#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
-#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
-#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
-#define CDC_MCN			0x40    /* Medium Catalog Number */
-#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
-#define CDC_PLAY_AUDIO		0x100   /* audio functions */
-#define CDC_RESET               0x200   /* hard reset device */
-#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
-#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
-#define CDC_CD_R		0x2000	/* drive is a CD-R */
-#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
-#define CDC_DVD			0x8000	/* drive is a DVD */
-#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
-#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
-#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
-#define CDC_MRW			0x80000 /* drive can read MRW */
-#define CDC_MRW_W		0x100000 /* drive can write MRW */
-#define CDC_RAM			0x200000 /* ok to open for WRITE */
-
-/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
-#define CDS_NO_INFO		0	/* if not implemented */
-#define CDS_NO_DISC		1
-#define CDS_TRAY_OPEN		2
-#define CDS_DRIVE_NOT_READY	3
-#define CDS_DISC_OK		4
-
-/* return values for the CDROM_DISC_STATUS ioctl */
-/* can also return CDS_NO_[INFO|DISC], from above */
-#define CDS_AUDIO		100
-#define CDS_DATA_1		101
-#define CDS_DATA_2		102
-#define CDS_XA_2_1		103
-#define CDS_XA_2_2		104
-#define CDS_MIXED		105
-
-/* User-configurable behavior options for the uniform CD-ROM driver */
-#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
-#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
-#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
-#define CDO_LOCK		0x8     /* lock tray on open files */
-#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
-
-/* Special codes used when specifying changer slots. */
-#define CDSL_NONE       	(INT_MAX-1)
-#define CDSL_CURRENT    	INT_MAX
-
-/* For partition based multisession access. IDE can handle 64 partitions
- * per drive - SCSI CD-ROM's use minors to differentiate between the
- * various drives, so we can't do multisessions the same way there.
- * Use the -o session=x option to mount on them.
- */
-#define CD_PART_MAX		64
-#define CD_PART_MASK		(CD_PART_MAX - 1)
-
-/*********************************************************************
- * Generic Packet commands, MMC commands, and such
- *********************************************************************/
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK			    0xa1
-#define GPCMD_CLOSE_TRACK		    0x5b
-#define GPCMD_FLUSH_CACHE		    0x35
-#define GPCMD_FORMAT_UNIT		    0x04
-#define GPCMD_GET_CONFIGURATION		    0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE		    0xac
-#define GPCMD_INQUIRY			    0x12
-#define GPCMD_LOAD_UNLOAD		    0xa6
-#define GPCMD_MECHANISM_STATUS		    0xbd
-#define GPCMD_MODE_SELECT_10		    0x55
-#define GPCMD_MODE_SENSE_10		    0x5a
-#define GPCMD_PAUSE_RESUME		    0x4b
-#define GPCMD_PLAY_AUDIO_10		    0x45
-#define GPCMD_PLAY_AUDIO_MSF		    0x47
-#define GPCMD_PLAY_AUDIO_TI		    0x48
-#define GPCMD_PLAY_CD			    0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
-#define GPCMD_READ_10			    0x28
-#define GPCMD_READ_12			    0xa8
-#define GPCMD_READ_BUFFER		    0x3c
-#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
-#define GPCMD_READ_CDVD_CAPACITY	    0x25
-#define GPCMD_READ_CD			    0xbe
-#define GPCMD_READ_CD_MSF		    0xb9
-#define GPCMD_READ_DISC_INFO		    0x51
-#define GPCMD_READ_DVD_STRUCTURE	    0xad
-#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
-#define GPCMD_READ_HEADER		    0x44
-#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
-#define GPCMD_READ_SUBCHANNEL		    0x42
-#define GPCMD_READ_TOC_PMA_ATIP		    0x43
-#define GPCMD_REPAIR_RZONE_TRACK	    0x58
-#define GPCMD_REPORT_KEY		    0xa4
-#define GPCMD_REQUEST_SENSE		    0x03
-#define GPCMD_RESERVE_RZONE_TRACK	    0x53
-#define GPCMD_SEND_CUE_SHEET		    0x5d
-#define GPCMD_SCAN			    0xba
-#define GPCMD_SEEK			    0x2b
-#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
-#define GPCMD_SEND_EVENT		    0xa2
-#define GPCMD_SEND_KEY			    0xa3
-#define GPCMD_SEND_OPC			    0x54
-#define GPCMD_SET_READ_AHEAD		    0xa7
-#define GPCMD_SET_STREAMING		    0xb6
-#define GPCMD_START_STOP_UNIT		    0x1b
-#define GPCMD_STOP_PLAY_SCAN		    0x4e
-#define GPCMD_TEST_UNIT_READY		    0x00
-#define GPCMD_VERIFY_10			    0x2f
-#define GPCMD_WRITE_10			    0x2a
-#define GPCMD_WRITE_12			    0xaa
-#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
-#define GPCMD_WRITE_BUFFER		    0x3b
-/* This is listed as optional in ATAPI 2.6, but is (curiously) 
- * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED			    0xbb
-/* This seems to be a SCSI specific CD-ROM opcode 
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI		    0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS		    0xda
-
-/* Mode page codes for mode sense/set */
-#define GPMODE_VENDOR_PAGE		0x00
-#define GPMODE_R_W_ERROR_PAGE		0x01
-#define GPMODE_WRITE_PARMS_PAGE		0x05
-#define GPMODE_WCACHING_PAGE		0x08
-#define GPMODE_AUDIO_CTL_PAGE		0x0e
-#define GPMODE_POWER_PAGE		0x1a
-#define GPMODE_FAULT_FAIL_PAGE		0x1c
-#define GPMODE_TO_PROTECT_PAGE		0x1d
-#define GPMODE_CAPABILITIES_PAGE	0x2a
-#define GPMODE_ALL_PAGES		0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE		0x0d
-
-
-
-/* DVD struct types */
-#define DVD_STRUCT_PHYSICAL	0x00
-#define DVD_STRUCT_COPYRIGHT	0x01
-#define DVD_STRUCT_DISCKEY	0x02
-#define DVD_STRUCT_BCA		0x03
-#define DVD_STRUCT_MANUFACT	0x04
-
-struct dvd_layer {
-	__u8 book_version	: 4;
-	__u8 book_type		: 4;
-	__u8 min_rate		: 4;
-	__u8 disc_size		: 4;
-	__u8 layer_type		: 4;
-	__u8 track_path		: 1;
-	__u8 nlayers		: 2;
-	__u8 track_density	: 4;
-	__u8 linear_density	: 4;
-	__u8 bca		: 1;
-	__u32 start_sector;
-	__u32 end_sector;
-	__u32 end_sector_l0;
-};
-
-#define DVD_LAYERS	4
-
-struct dvd_physical {
-	__u8 type;
-	__u8 layer_num;
-	struct dvd_layer layer[DVD_LAYERS];
-};
-
-struct dvd_copyright {
-	__u8 type;
-
-	__u8 layer_num;
-	__u8 cpst;
-	__u8 rmi;
-};
-
-struct dvd_disckey {
-	__u8 type;
-
-	unsigned agid		: 2;
-	__u8 value[2048];
-};
-
-struct dvd_bca {
-	__u8 type;
-
-	int len;
-	__u8 value[188];
-};
-
-struct dvd_manufact {
-	__u8 type;
-
-	__u8 layer_num;
-	int len;
-	__u8 value[2048];
-};
-
-typedef union {
-	__u8 type;
-
-	struct dvd_physical	physical;
-	struct dvd_copyright	copyright;
-	struct dvd_disckey	disckey;
-	struct dvd_bca		bca;
-	struct dvd_manufact	manufact;
-} dvd_struct;
-
-/*
- * DVD authentication ioctl
- */
-
-/* Authentication states */
-#define DVD_LU_SEND_AGID	0
-#define DVD_HOST_SEND_CHALLENGE	1
-#define DVD_LU_SEND_KEY1	2
-#define DVD_LU_SEND_CHALLENGE	3
-#define DVD_HOST_SEND_KEY2	4
-
-/* Termination states */
-#define DVD_AUTH_ESTABLISHED	5
-#define DVD_AUTH_FAILURE	6
-
-/* Other functions */
-#define DVD_LU_SEND_TITLE_KEY	7
-#define DVD_LU_SEND_ASF		8
-#define DVD_INVALIDATE_AGID	9
-#define DVD_LU_SEND_RPC_STATE	10
-#define DVD_HOST_SEND_RPC_STATE	11
-
-/* State data */
-typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
-typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
-
-struct dvd_lu_send_agid {
-	__u8 type;
-	unsigned agid		: 2;
-};
-
-struct dvd_host_send_challenge {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_challenge chal;
-};
-
-struct dvd_send_key {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_key key;
-};
-
-struct dvd_lu_send_challenge {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_challenge chal;
-};
-
-#define DVD_CPM_NO_COPYRIGHT	0
-#define DVD_CPM_COPYRIGHTED	1
-
-#define DVD_CP_SEC_NONE		0
-#define DVD_CP_SEC_EXIST	1
-
-#define DVD_CGMS_UNRESTRICTED	0
-#define DVD_CGMS_SINGLE		2
-#define DVD_CGMS_RESTRICTED	3
-
-struct dvd_lu_send_title_key {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_key title_key;
-	int lba;
-	unsigned cpm		: 1;
-	unsigned cp_sec		: 1;
-	unsigned cgms		: 2;
-};
-
-struct dvd_lu_send_asf {
-	__u8 type;
-	unsigned agid		: 2;
-
-	unsigned asf		: 1;
-};
-
-struct dvd_host_send_rpcstate {
-	__u8 type;
-	__u8 pdrc;
-};
-
-struct dvd_lu_send_rpcstate {
-	__u8 type		: 2;
-	__u8 vra		: 3;
-	__u8 ucca		: 3;
-	__u8 region_mask;
-	__u8 rpc_scheme;
-};
-
-typedef union {
-	__u8 type;
-
-	struct dvd_lu_send_agid		lsa;
-	struct dvd_host_send_challenge	hsc;
-	struct dvd_send_key		lsk;
-	struct dvd_lu_send_challenge	lsc;
-	struct dvd_send_key		hsk;
-	struct dvd_lu_send_title_key	lstk;
-	struct dvd_lu_send_asf		lsasf;
-	struct dvd_host_send_rpcstate	hrpcs;
-	struct dvd_lu_send_rpcstate	lrpcs;
-} dvd_authinfo;
-
-struct request_sense {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 valid		: 1;
-	__u8 error_code		: 7;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 error_code		: 7;
-	__u8 valid		: 1;
-#endif
-	__u8 segment_number;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 ili		: 1;
-	__u8 reserved2		: 1;
-	__u8 sense_key		: 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 sense_key		: 4;
-	__u8 reserved2		: 1;
-	__u8 ili		: 1;
-	__u8 reserved1		: 2;
-#endif
-	__u8 information[4];
-	__u8 add_sense_len;
-	__u8 command_info[4];
-	__u8 asc;
-	__u8 ascq;
-	__u8 fruc;
-	__u8 sks[3];
-	__u8 asb[46];
-};
-
-/*
- * feature profile
- */
-#define CDF_RWRT	0x0020	/* "Random Writable" */
-#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
-#define CDF_MRW 	0x0028
-
-/*
- * media status bits
- */
-#define CDM_MRW_NOTMRW			0
-#define CDM_MRW_BGFORMAT_INACTIVE	1
-#define CDM_MRW_BGFORMAT_ACTIVE		2
-#define CDM_MRW_BGFORMAT_COMPLETE	3
-
-/*
- * mrw address spaces
- */
-#define MRW_LBA_DMA			0
-#define MRW_LBA_GAA			1
-
-/*
- * mrw mode pages (first is deprecated) -- probed at init time and
- * cdi->mrw_mode_page is set
- */
-#define MRW_MODE_PC_PRE1		0x2c
-#define MRW_MODE_PC			0x03
-
-struct mrw_feature_desc {
-	__be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 feature_version	: 4;
-	__u8 persistent		: 1;
-	__u8 curr		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curr		: 1;
-	__u8 persistent		: 1;
-	__u8 feature_version	: 4;
-	__u8 reserved1		: 2;
-#endif
-	__u8 add_len;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2		: 7;
-	__u8 write		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 write		: 1;
-	__u8 reserved2		: 7;
-#endif
-	__u8 reserved3;
-	__u8 reserved4;
-	__u8 reserved5;
-};
-
-/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
-struct rwrt_feature_desc {
-	__be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 feature_version	: 4;
-	__u8 persistent		: 1;
-	__u8 curr		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curr		: 1;
-	__u8 persistent		: 1;
-	__u8 feature_version	: 4;
-	__u8 reserved1		: 2;
-#endif
-	__u8 add_len;
-	__u32 last_lba;
-	__u32 block_size;
-	__u16 blocking;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2		: 7;
-	__u8 page_present	: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 page_present	: 1;
-	__u8 reserved2		: 7;
-#endif
-	__u8 reserved3;
-};
-
-typedef struct {
-	__be16 disc_information_length;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1			: 3;
-        __u8 erasable			: 1;
-        __u8 border_status		: 2;
-        __u8 disc_status		: 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-        __u8 disc_status		: 2;
-        __u8 border_status		: 2;
-        __u8 erasable			: 1;
-	__u8 reserved1			: 3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	__u8 n_first_track;
-	__u8 n_sessions_lsb;
-	__u8 first_track_lsb;
-	__u8 last_track_lsb;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 did_v			: 1;
-        __u8 dbc_v			: 1;
-        __u8 uru			: 1;
-        __u8 reserved2			: 2;
-	__u8 dbit			: 1;
-	__u8 mrw_status			: 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 mrw_status			: 2;
-	__u8 dbit			: 1;
-        __u8 reserved2			: 2;
-        __u8 uru			: 1;
-        __u8 dbc_v			: 1;
-	__u8 did_v			: 1;
-#endif
-	__u8 disc_type;
-	__u8 n_sessions_msb;
-	__u8 first_track_msb;
-	__u8 last_track_msb;
-	__u32 disc_id;
-	__u32 lead_in;
-	__u32 lead_out;
-	__u8 disc_bar_code[8];
-	__u8 reserved3;
-	__u8 n_opc;
-} disc_information;
-
-typedef struct {
-	__be16 track_information_length;
-	__u8 track_lsb;
-	__u8 session_lsb;
-	__u8 reserved1;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2			: 2;
-        __u8 damage			: 1;
-        __u8 copy			: 1;
-        __u8 track_mode			: 4;
-	__u8 rt				: 1;
-	__u8 blank			: 1;
-	__u8 packet			: 1;
-	__u8 fp				: 1;
-	__u8 data_mode			: 4;
-	__u8 reserved3			: 6;
-	__u8 lra_v			: 1;
-	__u8 nwa_v			: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-        __u8 track_mode			: 4;
-        __u8 copy			: 1;
-        __u8 damage			: 1;
-	__u8 reserved2			: 2;
-	__u8 data_mode			: 4;
-	__u8 fp				: 1;
-	__u8 packet			: 1;
-	__u8 blank			: 1;
-	__u8 rt				: 1;
-	__u8 nwa_v			: 1;
-	__u8 lra_v			: 1;
-	__u8 reserved3			: 6;
-#endif
-	__be32 track_start;
-	__be32 next_writable;
-	__be32 free_blocks;
-	__be32 fixed_packet_size;
-	__be32 track_size;
-	__be32 last_rec_address;
-} track_information;
-
-struct feature_header {
-	__u32 data_len;
-	__u8 reserved1;
-	__u8 reserved2;
-	__u16 curr_profile;
-};
-
-struct mode_page_header {
-	__be16 mode_data_length;
-	__u8 medium_type;
-	__u8 reserved1;
-	__u8 reserved2;
-	__u8 reserved3;
-	__be16 desc_length;
-};
-
-#ifdef __KERNEL__
 #include <linux/fs.h>		/* not really needed, later.. */
 #include <linux/list.h>
+#include <uapi/linux/cdrom.h>
 
 struct packet_command
 {
@@ -1209,6 +311,4 @@ static inline int msf_to_lba(u8 m, u8 s, u8 f)
 {
 	return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
 }
-#endif  /* End of kernel only stuff */ 
-
 #endif  /* _LINUX_CDROM_H */
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
index 3c4aac406175d6d21438643be35dcc78a2a23e49..88bee3a3309045970ff2a561a519b256f6261141 100644
--- a/include/linux/cm4000_cs.h
+++ b/include/linux/cm4000_cs.h
@@ -1,68 +1,10 @@
 #ifndef	_CM4000_H_
 #define	_CM4000_H_
 
-#include <linux/types.h>
+#include <uapi/linux/cm4000_cs.h>
 
-#define	MAX_ATR			33
-
-#define	CM4000_MAX_DEV		4
-
-/* those two structures are passed via ioctl() from/to userspace.  They are
- * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
- * not to break compilation of userspace apps. -HW */
-
-typedef struct atreq {
-	__s32 atr_len;
-	unsigned char atr[64];
-	__s32 power_act;
-	unsigned char bIFSD;
-	unsigned char bIFSC;
-} atreq_t;
-
-
-/* what is particularly stupid in the original driver is the arch-dependent
- * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
- * will lay out the structure members differently than the 64bit kernel.
- *
- * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
- * On 32bit this will make no difference.  With 64bit kernels, it will make
- * 32bit apps work, too.
- */
-
-typedef struct ptsreq {
-	__u32 protocol; /*T=0: 2^0, T=1:  2^1*/
- 	unsigned char flags;
- 	unsigned char pts1;
- 	unsigned char pts2;
-	unsigned char pts3;
-} ptsreq_t;
-
-#define	CM_IOC_MAGIC		'c'
-#define	CM_IOC_MAXNR	        255
-
-#define	CM_IOCGSTATUS		_IOR (CM_IOC_MAGIC, 0, unsigned char *)
-#define	CM_IOCGATR		_IOWR(CM_IOC_MAGIC, 1, atreq_t *)
-#define	CM_IOCSPTS		_IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
-#define	CM_IOCSRDR		_IO  (CM_IOC_MAGIC, 3)
-#define CM_IOCARDOFF            _IO  (CM_IOC_MAGIC, 4)
-
-#define CM_IOSDBGLVL            _IOW(CM_IOC_MAGIC, 250, int*)
-
-/* card and device states */
-#define	CM_CARD_INSERTED		0x01
-#define	CM_CARD_POWERED			0x02
-#define	CM_ATR_PRESENT			0x04
-#define	CM_ATR_VALID	 		0x08
-#define	CM_STATE_VALID			0x0f
-/* extra info only from CM4000 */
-#define	CM_NO_READER			0x10
-#define	CM_BAD_CARD			0x20
-
-
-#ifdef __KERNEL__
 
 #define	DEVICE_NAME		"cmm"
 #define	MODULE_NAME		"cm4000_cs"
 
-#endif	/* __KERNEL__ */
 #endif	/* _CM4000_H_ */
diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h
index d03612b196e1500fcd9432ccff2a75cf9befb5a0..2c1bc1ea04ee05471bb536ccdd8ed6a8cf2fbc3c 100644
--- a/include/linux/cn_proc.h
+++ b/include/linux/cn_proc.h
@@ -14,111 +14,11 @@
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  */
-
 #ifndef CN_PROC_H
 #define CN_PROC_H
 
-#include <linux/types.h>
-
-/*
- * Userspace sends this enum to register with the kernel that it is listening
- * for events on the connector.
- */
-enum proc_cn_mcast_op {
-	PROC_CN_MCAST_LISTEN = 1,
-	PROC_CN_MCAST_IGNORE = 2
-};
-
-/*
- * From the user's point of view, the process
- * ID is the thread group ID and thread ID is the internal
- * kernel "pid". So, fields are assigned as follow:
- *
- *  In user space     -  In  kernel space
- *
- * parent process ID  =  parent->tgid
- * parent thread  ID  =  parent->pid
- * child  process ID  =  child->tgid
- * child  thread  ID  =  child->pid
- */
-
-struct proc_event {
-	enum what {
-		/* Use successive bits so the enums can be used to record
-		 * sets of events as well
-		 */
-		PROC_EVENT_NONE = 0x00000000,
-		PROC_EVENT_FORK = 0x00000001,
-		PROC_EVENT_EXEC = 0x00000002,
-		PROC_EVENT_UID  = 0x00000004,
-		PROC_EVENT_GID  = 0x00000040,
-		PROC_EVENT_SID  = 0x00000080,
-		PROC_EVENT_PTRACE = 0x00000100,
-		PROC_EVENT_COMM = 0x00000200,
-		/* "next" should be 0x00000400 */
-		/* "last" is the last process event: exit */
-		PROC_EVENT_EXIT = 0x80000000
-	} what;
-	__u32 cpu;
-	__u64 __attribute__((aligned(8))) timestamp_ns;
-		/* Number of nano seconds since system boot */
-	union { /* must be last field of proc_event struct */
-		struct {
-			__u32 err;
-		} ack;
-
-		struct fork_proc_event {
-			__kernel_pid_t parent_pid;
-			__kernel_pid_t parent_tgid;
-			__kernel_pid_t child_pid;
-			__kernel_pid_t child_tgid;
-		} fork;
-
-		struct exec_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-		} exec;
-
-		struct id_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			union {
-				__u32 ruid; /* task uid */
-				__u32 rgid; /* task gid */
-			} r;
-			union {
-				__u32 euid;
-				__u32 egid;
-			} e;
-		} id;
-
-		struct sid_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-		} sid;
-
-		struct ptrace_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			__kernel_pid_t tracer_pid;
-			__kernel_pid_t tracer_tgid;
-		} ptrace;
-
-		struct comm_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			char           comm[16];
-		} comm;
-
-		struct exit_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			__u32 exit_code, exit_signal;
-		} exit;
-	} event_data;
-};
+#include <uapi/linux/cn_proc.h>
 
-#ifdef __KERNEL__
 #ifdef CONFIG_PROC_EVENTS
 void proc_fork_connector(struct task_struct *task);
 void proc_exec_connector(struct task_struct *task);
@@ -151,5 +51,4 @@ static inline void proc_ptrace_connector(struct task_struct *task,
 static inline void proc_exit_connector(struct task_struct *task)
 {}
 #endif	/* CONFIG_PROC_EVENTS */
-#endif	/* __KERNEL__ */
 #endif	/* CN_PROC_H */
diff --git a/include/linux/coda.h b/include/linux/coda.h
index 96c87693800ba1b0eaf46065f670b46fb4e3cbfc..cff544f81105ecf83dac7cc0e75ea8ee26954592 100644
--- a/include/linux/coda.h
+++ b/include/linux/coda.h
@@ -55,690 +55,12 @@ Mellon the rights to redistribute these changes without encumbrance.
  * Linux modifications by 
  * Peter Braam, Aug 1996
  */
-
 #ifndef _CODA_HEADER_
 #define _CODA_HEADER_
 
-
-/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
-#if defined(__NetBSD__) || \
-  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
-#include <sys/types.h>
-#endif 
-
-#ifndef CODA_MAXSYMLINKS
-#define CODA_MAXSYMLINKS 10
-#endif
-
-#if defined(DJGPP) || defined(__CYGWIN32__)
-#ifdef KERNEL
-typedef unsigned long u_long;
-typedef unsigned int u_int;
-typedef unsigned short u_short;
-typedef u_long ino_t;
-typedef u_long dev_t;
-typedef void * caddr_t;
-#ifdef DOS
-typedef unsigned __int64 u_quad_t;
-#else 
-typedef unsigned long long u_quad_t;
-#endif
-
-#define inline
-
-struct timespec {
-        long       ts_sec;
-        long       ts_nsec;
-};
-#else  /* DJGPP but not KERNEL */
-#include <sys/time.h>
-typedef unsigned long long u_quad_t;
-#endif /* !KERNEL */
-#endif /* !DJGPP */
-
-
 #if defined(__linux__)
-#include <linux/time.h>
-#define cdev_t u_quad_t
-#ifndef __KERNEL__
-#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
-#define _UQUAD_T_ 1
 typedef unsigned long long u_quad_t;
-#endif
-#else /*__KERNEL__ */
-typedef unsigned long long u_quad_t;
-#endif /* __KERNEL__ */
 #else
-#define cdev_t dev_t
-#endif
-
-#ifdef __CYGWIN32__
-struct timespec {
-        time_t  tv_sec;         /* seconds */
-        long    tv_nsec;        /* nanoseconds */
-};
-#endif
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-typedef signed char	      int8_t;
-typedef unsigned char	    u_int8_t;
-typedef short		     int16_t;
-typedef unsigned short	   u_int16_t;
-typedef int		     int32_t;
-typedef unsigned int	   u_int32_t;
-#endif
-
-
-/*
- * Cfs constants
- */
-#define CODA_MAXNAMLEN   255
-#define CODA_MAXPATHLEN  1024
-#define CODA_MAXSYMLINK  10
-
-/* these are Coda's version of O_RDONLY etc combinations
- * to deal with VFS open modes
- */
-#define	C_O_READ	0x001
-#define	C_O_WRITE       0x002
-#define C_O_TRUNC       0x010
-#define C_O_EXCL	0x100
-#define C_O_CREAT	0x200
-
-/* these are to find mode bits in Venus */ 
-#define C_M_READ  00400
-#define C_M_WRITE 00200
-
-/* for access Venus will use */
-#define C_A_C_OK    8               /* Test for writing upon create.  */
-#define C_A_R_OK    4               /* Test for read permission.  */
-#define C_A_W_OK    2               /* Test for write permission.  */
-#define C_A_X_OK    1               /* Test for execute permission.  */
-#define C_A_F_OK    0               /* Test for existence.  */
-
-
-
-#ifndef _VENUS_DIRENT_T_
-#define _VENUS_DIRENT_T_ 1
-struct venus_dirent {
-        u_int32_t d_fileno;		/* file number of entry */
-        u_int16_t d_reclen;		/* length of this record */
-        u_int8_t  d_type;			/* file type, see below */
-        u_int8_t  d_namlen;		/* length of string in d_name */
-        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
-};
-#undef DIRSIZ
-#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
-                         (((dp)->d_namlen+1 + 3) &~ 3))
-
-/*
- * File types
- */
-#define	CDT_UNKNOWN	 0
-#define	CDT_FIFO	 1
-#define	CDT_CHR		 2
-#define	CDT_DIR		 4
-#define	CDT_BLK		 6
-#define	CDT_REG		 8
-#define	CDT_LNK		10
-#define	CDT_SOCK	12
-#define	CDT_WHT		14
-
-/*
- * Convert between stat structure types and directory types.
- */
-#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
-#define	CDTTOIF(dirtype)	((dirtype) << 12)
-
 #endif
-
-#ifndef _VUID_T_
-#define _VUID_T_
-typedef u_int32_t vuid_t;
-typedef u_int32_t vgid_t;
-#endif /*_VUID_T_ */
-
-struct CodaFid {
-	u_int32_t opaque[4];
-};
-
-#define coda_f2i(fid)\
-	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
-
-#ifndef _VENUS_VATTR_T_
-#define _VENUS_VATTR_T_
-/*
- * Vnode types.  VNON means no type.
- */
-enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
-
-struct coda_vattr {
-	long     	va_type;	/* vnode type (for create) */
-	u_short		va_mode;	/* files access mode and type */
-	short		va_nlink;	/* number of references to file */
-	vuid_t		va_uid;		/* owner user id */
-	vgid_t		va_gid;		/* owner group id */
-	long		va_fileid;	/* file id */
-	u_quad_t	va_size;	/* file size in bytes */
-	long		va_blocksize;	/* blocksize preferred for i/o */
-	struct timespec	va_atime;	/* time of last access */
-	struct timespec	va_mtime;	/* time of last modification */
-	struct timespec	va_ctime;	/* time file changed */
-	u_long		va_gen;		/* generation number of file */
-	u_long		va_flags;	/* flags defined for file */
-	cdev_t	        va_rdev;	/* device special file represents */
-	u_quad_t	va_bytes;	/* bytes of disk space held by file */
-	u_quad_t	va_filerev;	/* file modification number */
-};
-
+#include <uapi/linux/coda.h>
 #endif 
-
-/* structure used by CODA_STATFS for getting cache information from venus */
-struct coda_statfs {
-    int32_t f_blocks;
-    int32_t f_bfree;
-    int32_t f_bavail;
-    int32_t f_files;
-    int32_t f_ffree;
-};
-
-/*
- * Kernel <--> Venus communications.
- */
-
-#define CODA_ROOT	2
-#define CODA_OPEN_BY_FD	3
-#define CODA_OPEN	4
-#define CODA_CLOSE	5
-#define CODA_IOCTL	6
-#define CODA_GETATTR	7
-#define CODA_SETATTR	8
-#define CODA_ACCESS	9
-#define CODA_LOOKUP	10
-#define CODA_CREATE	11
-#define CODA_REMOVE	12
-#define CODA_LINK	13
-#define CODA_RENAME	14
-#define CODA_MKDIR	15
-#define CODA_RMDIR	16
-#define CODA_SYMLINK	18
-#define CODA_READLINK	19
-#define CODA_FSYNC	20
-#define CODA_VGET	22
-#define CODA_SIGNAL	23
-#define CODA_REPLACE	 24 /* DOWNCALL */
-#define CODA_FLUSH       25 /* DOWNCALL */
-#define CODA_PURGEUSER   26 /* DOWNCALL */
-#define CODA_ZAPFILE     27 /* DOWNCALL */
-#define CODA_ZAPDIR      28 /* DOWNCALL */
-#define CODA_PURGEFID    30 /* DOWNCALL */
-#define CODA_OPEN_BY_PATH 31
-#define CODA_RESOLVE     32
-#define CODA_REINTEGRATE 33
-#define CODA_STATFS	 34
-#define CODA_STORE	 35
-#define CODA_RELEASE	 36
-#define CODA_NCALLS 37
-
-#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
-
-#define VC_MAXDATASIZE	    8192
-#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
-                            VC_MAXDATASIZE  
-
-#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
-
-#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-
-/*
- *        Venus <-> Coda  RPC arguments
- */
-struct coda_in_hdr {
-    u_int32_t opcode;
-    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
-    pid_t pid;
-    pid_t pgid;
-    vuid_t uid;
-};
-
-/* Really important that opcode and unique are 1st two fields! */
-struct coda_out_hdr {
-    u_int32_t opcode;
-    u_int32_t unique;	
-    u_int32_t result;
-};
-
-/* coda_root: NO_IN */
-struct coda_root_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-};
-
-struct coda_root_in {
-    struct coda_in_hdr in;
-};
-
-/* coda_open: */
-struct coda_open_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_open_out {
-    struct coda_out_hdr oh;
-    cdev_t	dev;
-    ino_t	inode;
-};
-
-
-/* coda_store: */
-struct coda_store_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_store_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_release: */
-struct coda_release_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_release_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_close: */
-struct coda_close_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_close_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_ioctl: */
-struct coda_ioctl_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	cmd;
-    int	len;
-    int	rwflag;
-    char *data;			/* Place holder for data. */
-};
-
-struct coda_ioctl_out {
-    struct coda_out_hdr oh;
-    int	len;
-    caddr_t	data;		/* Place holder for data. */
-};
-
-
-/* coda_getattr: */
-struct coda_getattr_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_getattr_out {
-    struct coda_out_hdr oh;
-    struct coda_vattr attr;
-};
-
-
-/* coda_setattr: NO_OUT */
-struct coda_setattr_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-struct coda_setattr_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_access: NO_OUT */
-struct coda_access_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_access_out {
-    struct coda_out_hdr out;
-};
-
-
-/* lookup flags */
-#define CLU_CASE_SENSITIVE     0x01
-#define CLU_CASE_INSENSITIVE   0x02
-
-/* coda_lookup: */
-struct  coda_lookup_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int         name;		/* Place holder for data. */
-    int         flags;	
-};
-
-struct coda_lookup_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    int	vtype;
-};
-
-
-/* coda_create: */
-struct coda_create_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-    int excl;
-    int mode;
-    int 	name;		/* Place holder for data. */
-};
-
-struct coda_create_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-
-/* coda_remove: NO_OUT */
-struct coda_remove_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int name;		/* Place holder for data. */
-};
-
-struct coda_remove_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_link: NO_OUT */
-struct coda_link_in {
-    struct coda_in_hdr ih;
-    struct CodaFid sourceFid;	/* cnode to link *to* */
-    struct CodaFid destFid;	/* Directory in which to place link */
-    int tname;		/* Place holder for data. */
-};
-
-struct coda_link_out {
-    struct coda_out_hdr out;
-};
-
-
-/* coda_rename: NO_OUT */
-struct coda_rename_in {
-    struct coda_in_hdr ih;
-    struct CodaFid sourceFid;
-    int 	srcname;
-    struct CodaFid destFid;
-    int 	destname;
-};
-
-struct coda_rename_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_mkdir: */
-struct coda_mkdir_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-    int	   name;		/* Place holder for data. */
-};
-
-struct coda_mkdir_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-
-/* coda_rmdir: NO_OUT */
-struct coda_rmdir_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int name;		/* Place holder for data. */
-};
-
-struct coda_rmdir_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_symlink: NO_OUT */
-struct coda_symlink_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;	/* Directory to put symlink in */
-    int srcname;
-    struct coda_vattr attr;
-    int tname;
-};
-
-struct coda_symlink_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_readlink: */
-struct coda_readlink_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_readlink_out {
-    struct coda_out_hdr oh;
-    int	count;
-    caddr_t	data;		/* Place holder for data. */
-};
-
-
-/* coda_fsync: NO_OUT */
-struct coda_fsync_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_fsync_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_vget: */
-struct coda_vget_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_vget_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    int	vtype;
-};
-
-
-/* CODA_SIGNAL is out-of-band, doesn't need data. */
-/* CODA_INVALIDATE is a venus->kernel call */
-/* CODA_FLUSH is a venus->kernel call */
-
-/* coda_purgeuser: */
-/* CODA_PURGEUSER is a venus->kernel call */
-struct coda_purgeuser_out {
-    struct coda_out_hdr oh;
-    vuid_t uid;
-};
-
-/* coda_zapfile: */
-/* CODA_ZAPFILE is a venus->kernel call */
-struct coda_zapfile_out {  
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_zapdir: */
-/* CODA_ZAPDIR is a venus->kernel call */	
-struct coda_zapdir_out {	  
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_purgefid: */
-/* CODA_PURGEFID is a venus->kernel call */	
-struct coda_purgefid_out { 
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_replace: */
-/* CODA_REPLACE is a venus->kernel call */	
-struct coda_replace_out { /* coda_replace is a venus->kernel call */
-    struct coda_out_hdr oh;
-    struct CodaFid NewFid;
-    struct CodaFid OldFid;
-};
-
-/* coda_open_by_fd: */
-struct coda_open_by_fd_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int        flags;
-};
-
-struct coda_open_by_fd_out {
-    struct coda_out_hdr oh;
-    int fd;
-
-#ifdef __KERNEL__
-    struct file *fh; /* not passed from userspace but used in-kernel only */
-#endif
-};
-
-/* coda_open_by_path: */
-struct coda_open_by_path_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_open_by_path_out {
-    struct coda_out_hdr oh;
-	int path;
-};
-
-/* coda_statfs: NO_IN */
-struct coda_statfs_in {
-    struct coda_in_hdr in;
-};
-
-struct coda_statfs_out {
-    struct coda_out_hdr oh;
-    struct coda_statfs stat;
-};
-
-/* 
- * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
- * For instance, if the fid is inconsistent. 
- * This case is handled by setting the top bit of the type result parameter.
- */
-#define CODA_NOCACHE          0x80000000
-
-union inputArgs {
-    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
-    struct coda_open_in coda_open;
-    struct coda_store_in coda_store;
-    struct coda_release_in coda_release;
-    struct coda_close_in coda_close;
-    struct coda_ioctl_in coda_ioctl;
-    struct coda_getattr_in coda_getattr;
-    struct coda_setattr_in coda_setattr;
-    struct coda_access_in coda_access;
-    struct coda_lookup_in coda_lookup;
-    struct coda_create_in coda_create;
-    struct coda_remove_in coda_remove;
-    struct coda_link_in coda_link;
-    struct coda_rename_in coda_rename;
-    struct coda_mkdir_in coda_mkdir;
-    struct coda_rmdir_in coda_rmdir;
-    struct coda_symlink_in coda_symlink;
-    struct coda_readlink_in coda_readlink;
-    struct coda_fsync_in coda_fsync;
-    struct coda_vget_in coda_vget;
-    struct coda_open_by_fd_in coda_open_by_fd;
-    struct coda_open_by_path_in coda_open_by_path;
-    struct coda_statfs_in coda_statfs;
-};
-
-union outputArgs {
-    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
-    struct coda_root_out coda_root;
-    struct coda_open_out coda_open;
-    struct coda_ioctl_out coda_ioctl;
-    struct coda_getattr_out coda_getattr;
-    struct coda_lookup_out coda_lookup;
-    struct coda_create_out coda_create;
-    struct coda_mkdir_out coda_mkdir;
-    struct coda_readlink_out coda_readlink;
-    struct coda_vget_out coda_vget;
-    struct coda_purgeuser_out coda_purgeuser;
-    struct coda_zapfile_out coda_zapfile;
-    struct coda_zapdir_out coda_zapdir;
-    struct coda_purgefid_out coda_purgefid;
-    struct coda_replace_out coda_replace;
-    struct coda_open_by_fd_out coda_open_by_fd;
-    struct coda_open_by_path_out coda_open_by_path;
-    struct coda_statfs_out coda_statfs;
-};    
-
-union coda_downcalls {
-    /* CODA_INVALIDATE is a venus->kernel call */
-    /* CODA_FLUSH is a venus->kernel call */
-    struct coda_purgeuser_out purgeuser;
-    struct coda_zapfile_out zapfile;
-    struct coda_zapdir_out zapdir;
-    struct coda_purgefid_out purgefid;
-    struct coda_replace_out replace;
-};
-
-
-/*
- * Used for identifying usage of "Control" and pioctls
- */
-
-#define PIOCPARM_MASK 0x0000ffff
-struct ViceIoctl {
-        void __user *in;        /* Data to be transferred in */
-        void __user *out;       /* Data to be transferred out */
-        u_short in_size;        /* Size of input buffer <= 2K */
-        u_short out_size;       /* Maximum size of output buffer, <= 2K */
-};
-
-struct PioctlData {
-        const char __user *path;
-        int follow;
-        struct ViceIoctl vi;
-};
-
-#define CODA_CONTROL		".CONTROL"
-#define CODA_CONTROLLEN		8
-#define CTL_INO			-1
-
-/* Data passed to mount */
-
-#define CODA_MOUNT_VERSION 1
-
-struct coda_mount_data {
-	int		version;
-	int		fd;       /* Opened device */
-};
-
-#endif 
-
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
index 72f2d2f0af91efec0793a3fa202483d2383e82ac..8031d6eef102b71cdf37f2a65202cb4f226f5658 100644
--- a/include/linux/coda_psdev.h
+++ b/include/linux/coda_psdev.h
@@ -1,14 +1,9 @@
 #ifndef __CODA_PSDEV_H
 #define __CODA_PSDEV_H
 
-#include <linux/magic.h>
-
-#define CODA_PSDEV_MAJOR 67
-#define MAX_CODADEVS  5	   /* how many do we allow */
-
-#ifdef __KERNEL__
 #include <linux/backing-dev.h>
 #include <linux/mutex.h>
+#include <uapi/linux/coda_psdev.h>
 
 struct kstatfs;
 
@@ -74,23 +69,4 @@ int venus_statfs(struct dentry *dentry, struct kstatfs *sfs);
  */
 
 extern struct venus_comm coda_comms[];
-#endif /* __KERNEL__ */
-
-/* messages between coda filesystem in kernel and Venus */
-struct upc_req {
-	struct list_head    uc_chain;
-	caddr_t	            uc_data;
-	u_short	            uc_flags;
-	u_short             uc_inSize;  /* Size is at most 5000 bytes */
-	u_short	            uc_outSize;
-	u_short	            uc_opcode;  /* copied from data to save lookup */
-	int		    uc_unique;
-	wait_queue_head_t   uc_sleep;   /* process' wait queue */
-};
-
-#define CODA_REQ_ASYNC  0x1
-#define CODA_REQ_READ   0x2
-#define CODA_REQ_WRITE  0x4
-#define CODA_REQ_ABORT  0x8
-
 #endif
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 76384074262d894e4732ed6db4e1883053f0b107..b2b5a41b6a2400342ff5aec1abb4f2834caaf869 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -18,63 +18,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-
 #ifndef __CONNECTOR_H
 #define __CONNECTOR_H
 
-#include <linux/types.h>
-
-/*
- * Process Events connector unique ids -- used for message routing
- */
-#define CN_IDX_PROC			0x1
-#define CN_VAL_PROC			0x1
-#define CN_IDX_CIFS			0x2
-#define CN_VAL_CIFS                     0x1
-#define CN_W1_IDX			0x3	/* w1 communication */
-#define CN_W1_VAL			0x1
-#define CN_IDX_V86D			0x4
-#define CN_VAL_V86D_UVESAFB		0x1
-#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
-#define CN_DST_IDX			0x6
-#define CN_DST_VAL			0x1
-#define CN_IDX_DM			0x7	/* Device Mapper */
-#define CN_VAL_DM_USERSPACE_LOG		0x1
-#define CN_IDX_DRBD			0x8
-#define CN_VAL_DRBD			0x1
-#define CN_KVP_IDX			0x9	/* HyperV KVP */
-#define CN_KVP_VAL			0x1	/* queries from the kernel */
-
-#define CN_NETLINK_USERS		10	/* Highest index + 1 */
-
-/*
- * Maximum connector's message size.
- */
-#define CONNECTOR_MAX_MSG_SIZE		16384
-
-/*
- * idx and val are unique identifiers which 
- * are used for message routing and 
- * must be registered in connector.h for in-kernel usage.
- */
-
-struct cb_id {
-	__u32 idx;
-	__u32 val;
-};
-
-struct cn_msg {
-	struct cb_id id;
-
-	__u32 seq;
-	__u32 ack;
-
-	__u16 len;		/* Length of the following data */
-	__u16 flags;
-	__u8 data[0];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/atomic.h>
 
@@ -82,6 +28,7 @@ struct cn_msg {
 #include <linux/workqueue.h>
 
 #include <net/sock.h>
+#include <uapi/linux/connector.h>
 
 #define CN_CBQ_NAMELEN		32
 
@@ -137,5 +84,4 @@ void cn_queue_free_dev(struct cn_queue_dev *dev);
 
 int cn_cb_equal(struct cb_id *, struct cb_id *);
 
-#endif				/* __KERNEL__ */
 #endif				/* __CONNECTOR_H */
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
index 0e7bf272ec2ffbb5a362930bbf669474634c372f..133789609f239e5f25edfade82be8fe7f6ddb381 100644
--- a/include/linux/cramfs_fs.h
+++ b/include/linux/cramfs_fs.h
@@ -1,94 +1,10 @@
 #ifndef __CRAMFS_H
 #define __CRAMFS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/cramfs_fs.h>
 
-#define CRAMFS_SIGNATURE	"Compressed ROMFS"
-
-/*
- * Width of various bitfields in struct cramfs_inode.
- * Primarily used to generate warnings in mkcramfs.
- */
-#define CRAMFS_MODE_WIDTH 16
-#define CRAMFS_UID_WIDTH 16
-#define CRAMFS_SIZE_WIDTH 24
-#define CRAMFS_GID_WIDTH 8
-#define CRAMFS_NAMELEN_WIDTH 6
-#define CRAMFS_OFFSET_WIDTH 26
-
-/*
- * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
- * path length is 63 << 2 = 252.
- */
-#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
-
-/*
- * Reasonably terse representation of the inode data.
- */
-struct cramfs_inode {
-	__u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
-	/* SIZE for device files is i_rdev */
-	__u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
-	/* NAMELEN is the length of the file name, divided by 4 and
-           rounded up.  (cramfs doesn't support hard links.) */
-	/* OFFSET: For symlinks and non-empty regular files, this
-	   contains the offset (divided by 4) of the file data in
-	   compressed form (starting with an array of block pointers;
-	   see README).  For non-empty directories it is the offset
-	   (divided by 4) of the inode of the first file in that
-	   directory.  For anything else, offset is zero. */
-	__u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
-};
-
-struct cramfs_info {
-	__u32 crc;
-	__u32 edition;
-	__u32 blocks;
-	__u32 files;
-};
-
-/*
- * Superblock information at the beginning of the FS.
- */
-struct cramfs_super {
-	__u32 magic;			/* 0x28cd3d45 - random number */
-	__u32 size;			/* length in bytes */
-	__u32 flags;			/* feature flags */
-	__u32 future;			/* reserved for future use */
-	__u8 signature[16];		/* "Compressed ROMFS" */
-	struct cramfs_info fsid;	/* unique filesystem info */
-	__u8 name[16];			/* user-defined name */
-	struct cramfs_inode root;	/* root inode data */
-};
-
-/*
- * Feature flags
- *
- * 0x00000000 - 0x000000ff: features that work for all past kernels
- * 0x00000100 - 0xffffffff: features that don't work for past kernels
- */
-#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
-#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
-#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
-#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
-#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
-
-/*
- * Valid values in super.flags.  Currently we refuse to mount
- * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
- * changed to test super.future instead.
- */
-#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
-				| CRAMFS_FLAG_HOLES \
-				| CRAMFS_FLAG_WRONG_SIGNATURE \
-				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
-
-#ifdef __KERNEL__
 /* Uncompression interfaces to the underlying zlib */
 int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
 int cramfs_uncompress_init(void);
 void cramfs_uncompress_exit(void);
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/cuda.h b/include/linux/cuda.h
index 9f9865ff781e3d69915b1839394e302874bd6462..b723328238072cd62bf19dd30e635bc916cb23ce 100644
--- a/include/linux/cuda.h
+++ b/include/linux/cuda.h
@@ -4,38 +4,15 @@
  *
  * Copyright (C) 1996 Paul Mackerras.
  */
-
 #ifndef _LINUX_CUDA_H
 #define _LINUX_CUDA_H
 
-/* CUDA commands (2nd byte) */
-#define CUDA_WARM_START		0
-#define CUDA_AUTOPOLL		1
-#define CUDA_GET_6805_ADDR	2
-#define CUDA_GET_TIME		3
-#define CUDA_GET_PRAM		7
-#define CUDA_SET_6805_ADDR	8
-#define CUDA_SET_TIME		9
-#define CUDA_POWERDOWN		0xa
-#define CUDA_POWERUP_TIME	0xb
-#define CUDA_SET_PRAM		0xc
-#define CUDA_MS_RESET		0xd
-#define CUDA_SEND_DFAC		0xe
-#define CUDA_RESET_SYSTEM	0x11
-#define CUDA_SET_IPL		0x12
-#define CUDA_SET_AUTO_RATE	0x14
-#define CUDA_GET_AUTO_RATE	0x16
-#define CUDA_SET_DEVICE_LIST	0x19
-#define CUDA_GET_DEVICE_LIST	0x1a
-#define CUDA_GET_SET_IIC	0x22
+#include <uapi/linux/cuda.h>
 
-#ifdef __KERNEL__
 
 extern int find_via_cuda(void);
 extern int cuda_request(struct adb_request *req,
 			void (*done)(struct adb_request *), int nbytes, ...);
 extern void cuda_poll(void);
 
-#endif	/* __KERNEL */
-
 #endif /* _LINUX_CUDA_H */
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index a5049eaf782d09ea7122857548b73444ca4cbadc..19ae518f54715ca3592043c70797e2176a84cb30 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -63,434 +63,11 @@
  *
  *
  */
-
 #ifndef _LINUX_CYCLADES_H
 #define _LINUX_CYCLADES_H
 
-#include <linux/types.h>
-
-struct cyclades_monitor {
-        unsigned long           int_count;
-        unsigned long           char_count;
-        unsigned long           char_max;
-        unsigned long           char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
-    __kernel_time_t in_use;	/* Time device has been in use (secs) */
-    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
-    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
-    unsigned long  recv_bytes;	/* Bytes received */
-    unsigned long  xmit_bytes;	/* Bytes transmitted */
-    unsigned long  overruns;	/* Input overruns */
-    unsigned long  frame_errs;	/* Input framing errors */
-    unsigned long  parity_errs;	/* Input parity errors */
-};
-
-#define CYCLADES_MAGIC  0x4359
-
-#define CYGETMON                0x435901
-#define CYGETTHRESH             0x435902
-#define CYSETTHRESH             0x435903
-#define CYGETDEFTHRESH          0x435904
-#define CYSETDEFTHRESH          0x435905
-#define CYGETTIMEOUT            0x435906
-#define CYSETTIMEOUT            0x435907
-#define CYGETDEFTIMEOUT         0x435908
-#define CYSETDEFTIMEOUT         0x435909
-#define CYSETRFLOW		0x43590a
-#define CYGETRFLOW		0x43590b
-#define CYSETRTSDTR_INV		0x43590c
-#define CYGETRTSDTR_INV		0x43590d
-#define CYZSETPOLLCYCLE		0x43590e
-#define CYZGETPOLLCYCLE		0x43590f
-#define CYGETCD1400VER		0x435910
-#define	CYSETWAIT		0x435912
-#define	CYGETWAIT		0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC           ('M' << 8)
-#define CZ_NBOARDS      (CZIOC|0xfa)
-#define CZ_BOOT_START   (CZIOC|0xfb)
-#define CZ_BOOT_DATA    (CZIOC|0xfc)
-#define CZ_BOOT_END     (CZIOC|0xfd)
-#define CZ_TEST         (CZIOC|0xfe)
-
-#define CZ_DEF_POLL	(HZ/25)
-
-#define MAX_BOARD       4       /* Max number of boards */
-#define MAX_DEV         256     /* Max number of ports total */
-#define	CYZ_MAX_SPEED	921600
-
-#define	CYZ_FIFO_SIZE	16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
-        unsigned short  nboard;
-        int             status[MAX_BOARD];
-        int             nchannel[MAX_BOARD];
-        int             fw_rev[MAX_BOARD];
-        unsigned long   offset;
-        unsigned long   data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- *	Memory Window Sizes
- */
-
-#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
-#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
-						  8Zo V.2 */
-#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
-
-/*
- *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- *	normally will access only interested on the fpga_id, fpga_version,
- *	start_cpu and stop_cpu.
- */
-
-struct	CUSTOM_REG {
-	__u32	fpga_id;		/* FPGA Identification Register */
-	__u32	fpga_version;		/* FPGA Version Number Register */
-	__u32	cpu_start;		/* CPU start Register (write) */
-	__u32	cpu_stop;		/* CPU stop Register (write) */
-	__u32	misc_reg;		/* Miscellaneous Register */
-	__u32	idt_mode;		/* IDT mode Register */
-	__u32	uart_irq_status;	/* UART IRQ status Register */
-	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
-	__u32	test_register;		/* Test Register */
-	__u32	test_count;		/* Test Count Register */
-	__u32	timer_select;		/* Timer select register */
-	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
-	__u32	ram_wait_state;		/* RAM wait-state Register */
-	__u32	uart_wait_state;	/* UART wait-state Register */
-	__u32	timer_wait_state;	/* timer wait-state Register */
-	__u32	ack_wait_state;		/* ACK wait State Register */
-};
-
-/*
- *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- *	registers. This structure can be used to access the 9060 registers
- *	(memory mapped).
- */
-
-struct RUNTIME_9060 {
-	__u32	loc_addr_range;	/* 00h - Local Address Range */
-	__u32	loc_addr_base;	/* 04h - Local Address Base */
-	__u32	loc_arbitr;	/* 08h - Local Arbitration */
-	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
-	__u32	loc_rom_range;	/* 10h - Local ROM Range */
-	__u32	loc_rom_base;	/* 14h - Local ROM Base */
-	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
-	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
-	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
-	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
-	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
-	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
-	__u32	filler1;	/* 30h */
-	__u32	filler2;	/* 34h */
-	__u32	filler3;	/* 38h */
-	__u32	filler4;	/* 3Ch */
-	__u32	mail_box_0;	/* 40h - Mail Box 0 */
-	__u32	mail_box_1;	/* 44h - Mail Box 1 */
-	__u32	mail_box_2;	/* 48h - Mail Box 2 */
-	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
-	__u32	filler5;	/* 50h */
-	__u32	filler6;	/* 54h */
-	__u32	filler7;	/* 58h */
-	__u32	filler8;	/* 5Ch */
-	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
-	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
-	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
-	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
-#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
-#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
-#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
-#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- *	This file contains the definitions for interfacing with the
- *	Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define	MAX_CHAN	64		/* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
-#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
-#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
-#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
-
-#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
-					   (1000 ms) */
-#define	ZF_TINACT	ZF_TINACT_DEF
-
-struct	FIRM_ID {
-	__u32	signature;		/* ZFIRM/U signature */
-	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define	C_OS_LINUX	0x00000030	/* generic Linux system */
-
-/* channel op_mode */
-
-#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
-#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
-#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
-#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
-#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
-
-/* comm_parity - parity */
-
-#define	C_PR_NONE	0x00000000	/* None */
-#define	C_PR_ODD	0x00000001	/* Odd */
-#define C_PR_EVEN	0x00000002	/* Even */
-#define C_PR_MARK	0x00000004	/* Mark */
-#define C_PR_SPACE	0x00000008	/* Space */
-#define C_PR_PARITY	0x000000ff
-
-#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
-#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5	0x00000001
-#define C_DL_CS6	0x00000002
-#define C_DL_CS7	0x00000004
-#define C_DL_CS8	0x00000008
-#define	C_DL_CS		0x0000000f
-#define C_DL_1STOP	0x00000010
-#define C_DL_15STOP	0x00000020
-#define C_DL_2STOP	0x00000040
-#define	C_DL_STOP	0x000000f0
-
-/* interrupt enabling/status */
-
-#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
-#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
-#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
-#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
-#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
-#define	C_IN_MDCD	0x00000100	/* modem DCD change */
-#define	C_IN_MDSR	0x00000200	/* modem DSR change */
-#define	C_IN_MRI	0x00000400	/* modem RI change */
-#define	C_IN_MCTS	0x00000800	/* modem CTS change */
-#define	C_IN_RXBRK	0x00001000	/* Break received */
-#define	C_IN_PR_ERROR	0x00002000	/* parity error */
-#define	C_IN_FR_ERROR	0x00004000	/* frame error */
-#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
-#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
-#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
-#define C_IN_MRTS	0x00040000	/* modem RTS drop */
-#define C_IN_ICHAR	0x00080000
- 
-/* flow control */
-
-#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
-#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
-#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
-#define	C_FL_SWFLOW	0x0000000f
-
-/* flow status */
-
-#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
-#define	C_FS_SENDING	0x00000001	/* UART is sending data */
-#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
-					   IOCTLM command */
-#define	C_RS_RTS	0x00000001	/* RTS */
-#define	C_RS_DTR	0x00000004	/* DTR */
-#define	C_RS_DCD	0x00000100	/* CD */
-#define	C_RS_DSR	0x00000200	/* DSR */
-#define	C_RS_RI		0x00000400	/* RI */
-#define	C_RS_CTS	0x00000800	/* CTS */
-
-/* commands Host <-> Board */
-
-#define	C_CM_RESET	0x01		/* reset/flush buffers */
-#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
-#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
-#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
-#define	C_CM_SENDXOFF	0x10		/* send Xoff */
-#define	C_CM_SENDXON	0x11		/* send Xon */
-#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
-#define	C_CM_SENDBRK	0x41		/* send break */
-#define	C_CM_INTBACK	0x42		/* Interrupt back */
-#define	C_CM_SET_BREAK	0x43		/* Tx break on */
-#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
-#define	C_CM_CMD_DONE	0x45		/* Previous command done */
-#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
-#define	C_CM_TINACT	0x51		/* set inactivity detection */
-#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
-#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
-#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
-#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
-#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
-#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
-#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
-					   driver */
-#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
-					   driver */
-
-#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
-#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
-#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
-#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
-#define	C_CM_TXFEMPTY	0x64
-#define	C_CM_ICHAR	0x65
-#define	C_CM_MDCD	0x70		/* modem DCD change */
-#define	C_CM_MDSR	0x71		/* modem DSR change */
-#define	C_CM_MRI	0x72		/* modem RI change */
-#define	C_CM_MCTS	0x73		/* modem CTS change */
-#define C_CM_MRTS	0x74		/* modem RTS drop */
-#define	C_CM_RXBRK	0x84		/* Break received */
-#define	C_CM_PR_ERROR	0x85		/* Parity error */
-#define	C_CM_FR_ERROR	0x86		/* Frame error */
-#define C_CM_OVR_ERROR  0x87            /* Overrun error */
-#define C_CM_RXOFL	0x88            /* RX buffer overflow */
-#define	C_CM_CMDERROR	0x90		/* command error */
-#define	C_CM_FATAL	0x91		/* fatal error */
-#define	C_CM_HW_RESET	0x92		/* reset board */
-
-/*
- *	CH_CTRL - This per port structure contains all parameters
- *	that control an specific port. It can be seen as the
- *	configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
-	__u32	op_mode;	/* operation mode */
-	__u32	intr_enable;	/* interrupt masking */
-	__u32	sw_flow;	/* SW flow control */
-	__u32	flow_status;	/* output flow status */
-	__u32	comm_baud;	/* baud rate  - numerically specified */
-	__u32	comm_parity;	/* parity */
-	__u32	comm_data_l;	/* data length/stop */
-	__u32	comm_flags;	/* other flags */
-	__u32	hw_flow;	/* HW flow control */
-	__u32	rs_control;	/* RS-232 outputs */
-	__u32	rs_status;	/* RS-232 inputs */
-	__u32	flow_xon;	/* xon char */
-	__u32	flow_xoff;	/* xoff char */
-	__u32	hw_overflow;	/* hw overflow counter */
-	__u32	sw_overflow;	/* sw overflow counter */
-	__u32	comm_error;	/* frame/parity error counter */
-	__u32 ichar;
-	__u32 filler[7];
-};
-
-
-/*
- *	BUF_CTRL - This per channel structure contains
- *	all Tx and Rx buffer control for a given channel.
- */
-
-struct	BUF_CTRL	{
-	__u32	flag_dma;	/* buffers are in Host memory */
-	__u32	tx_bufaddr;	/* address of the tx buffer */
-	__u32	tx_bufsize;	/* tx buffer size */
-	__u32	tx_threshold;	/* tx low water mark */
-	__u32	tx_get;		/* tail index tx buf */
-	__u32	tx_put;		/* head index tx buf */
-	__u32	rx_bufaddr;	/* address of the rx buffer */
-	__u32	rx_bufsize;	/* rx buffer size */
-	__u32	rx_threshold;	/* rx high water mark */
-	__u32	rx_get;		/* tail index rx buf */
-	__u32	rx_put;		/* head index rx buf */
-	__u32	filler[5];	/* filler to align structures */
-};
-
-/*
- *	BOARD_CTRL - This per board structure contains all global 
- *	control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
-	/* static info provided by the on-board CPU */
-	__u32	n_channel;	/* number of channels */
-	__u32	fw_version;	/* firmware version */
-
-	/* static info provided by the driver */
-	__u32	op_system;	/* op_system id */
-	__u32	dr_version;	/* driver version */
-
-	/* board control area */
-	__u32	inactivity;	/* inactivity control */
-
-	/* host to FW commands */
-	__u32	hcmd_channel;	/* channel number */
-	__u32	hcmd_param;	/* pointer to parameters */
-
-	/* FW to Host commands */
-	__u32	fwcmd_channel;	/* channel number */
-	__u32	fwcmd_param;	/* pointer to parameters */
-	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
-	/* filler so the structures are aligned */
-	__u32	filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE	(10*MAX_CHAN)
-
-struct	INT_QUEUE {
-	unsigned char	intr_code[QUEUE_SIZE];
-	unsigned long	channel[QUEUE_SIZE];
-	unsigned long	param[QUEUE_SIZE];
-	unsigned long	put;
-	unsigned long	get;
-};
-
-/*
- *	ZFW_CTRL - This is the data structure that includes all other
- *	data structures used by the Firmware.
- */
- 
-struct ZFW_CTRL {
-	struct BOARD_CTRL	board_ctrl;
-	struct CH_CTRL		ch_ctrl[MAX_CHAN];
-	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
+#include <uapi/linux/cyclades.h>
 
-#ifdef __KERNEL__
 
 /* Per card data structure */
 struct cyclades_card {
@@ -780,5 +357,4 @@ struct cyclades_port {
 
 /***************************************************************************/
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_CYCLADES_H */
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index d16294e2a11818261607aee670be9d0dedc14dff..439ff698000aa4ef81f5cef53e69095ce9c9fc80 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -1,239 +1,6 @@
 #ifndef _LINUX_DCCP_H
 #define _LINUX_DCCP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/**
- * struct dccp_hdr - generic part of DCCP packet header
- *
- * @dccph_sport - Relevant port on the endpoint that sent this packet
- * @dccph_dport - Relevant port on the other endpoint
- * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
- * @dccph_ccval - Used by the HC-Sender CCID
- * @dccph_cscov - Parts of the packet that are covered by the Checksum field
- * @dccph_checksum - Internet checksum, depends on dccph_cscov
- * @dccph_x - 0 = 24 bit sequence number, 1 = 48
- * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
- * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
- */
-struct dccp_hdr {
-	__be16	dccph_sport,
-		dccph_dport;
-	__u8	dccph_doff;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	dccph_cscov:4,
-		dccph_ccval:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	dccph_ccval:4,
-		dccph_cscov:4;
-#else
-#error  "Adjust your <asm/byteorder.h> defines"
-#endif
-	__sum16	dccph_checksum;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	dccph_x:1,
-		dccph_type:4,
-		dccph_reserved:3;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	dccph_reserved:3,
-		dccph_type:4,
-		dccph_x:1;
-#else
-#error  "Adjust your <asm/byteorder.h> defines"
-#endif
-	__u8	dccph_seq2;
-	__be16	dccph_seq;
-};
-
-/**
- * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
- *
- * @dccph_seq_low - low 24 bits of a 48 bit seq packet
- */
-struct dccp_hdr_ext {
-	__be32	dccph_seq_low;
-};
-
-/**
- * struct dccp_hdr_request - Connection initiation request header
- *
- * @dccph_req_service - Service to which the client app wants to connect
- */
-struct dccp_hdr_request {
-	__be32	dccph_req_service;
-};
-/**
- * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
- *
- * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
- * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
- */
-struct dccp_hdr_ack_bits {
-	__be16	dccph_reserved1;
-	__be16	dccph_ack_nr_high;
-	__be32	dccph_ack_nr_low;
-};
-/**
- * struct dccp_hdr_response - Connection initiation response header
- *
- * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
- * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
- */
-struct dccp_hdr_response {
-	struct dccp_hdr_ack_bits	dccph_resp_ack;
-	__be32				dccph_resp_service;
-};
-
-/**
- * struct dccp_hdr_reset - Unconditionally shut down a connection
- *
- * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
- * @dccph_reset_code - one of %dccp_reset_codes
- * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
- */
-struct dccp_hdr_reset {
-	struct dccp_hdr_ack_bits	dccph_reset_ack;
-	__u8				dccph_reset_code,
-					dccph_reset_data[3];
-};
-
-enum dccp_pkt_type {
-	DCCP_PKT_REQUEST = 0,
-	DCCP_PKT_RESPONSE,
-	DCCP_PKT_DATA,
-	DCCP_PKT_ACK,
-	DCCP_PKT_DATAACK,
-	DCCP_PKT_CLOSEREQ,
-	DCCP_PKT_CLOSE,
-	DCCP_PKT_RESET,
-	DCCP_PKT_SYNC,
-	DCCP_PKT_SYNCACK,
-	DCCP_PKT_INVALID,
-};
-
-#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
-
-static inline unsigned int dccp_packet_hdr_len(const __u8 type)
-{
-	if (type == DCCP_PKT_DATA)
-		return 0;
-	if (type == DCCP_PKT_DATAACK	||
-	    type == DCCP_PKT_ACK	||
-	    type == DCCP_PKT_SYNC	||
-	    type == DCCP_PKT_SYNCACK	||
-	    type == DCCP_PKT_CLOSE	||
-	    type == DCCP_PKT_CLOSEREQ)
-		return sizeof(struct dccp_hdr_ack_bits);
-	if (type == DCCP_PKT_REQUEST)
-		return sizeof(struct dccp_hdr_request);
-	if (type == DCCP_PKT_RESPONSE)
-		return sizeof(struct dccp_hdr_response);
-	return sizeof(struct dccp_hdr_reset);
-}
-enum dccp_reset_codes {
-	DCCP_RESET_CODE_UNSPECIFIED = 0,
-	DCCP_RESET_CODE_CLOSED,
-	DCCP_RESET_CODE_ABORTED,
-	DCCP_RESET_CODE_NO_CONNECTION,
-	DCCP_RESET_CODE_PACKET_ERROR,
-	DCCP_RESET_CODE_OPTION_ERROR,
-	DCCP_RESET_CODE_MANDATORY_ERROR,
-	DCCP_RESET_CODE_CONNECTION_REFUSED,
-	DCCP_RESET_CODE_BAD_SERVICE_CODE,
-	DCCP_RESET_CODE_TOO_BUSY,
-	DCCP_RESET_CODE_BAD_INIT_COOKIE,
-	DCCP_RESET_CODE_AGGRESSION_PENALTY,
-
-	DCCP_MAX_RESET_CODES		/* Leave at the end!  */
-};
-
-/* DCCP options */
-enum {
-	DCCPO_PADDING = 0,
-	DCCPO_MANDATORY = 1,
-	DCCPO_MIN_RESERVED = 3,
-	DCCPO_MAX_RESERVED = 31,
-	DCCPO_CHANGE_L = 32,
-	DCCPO_CONFIRM_L = 33,
-	DCCPO_CHANGE_R = 34,
-	DCCPO_CONFIRM_R = 35,
-	DCCPO_NDP_COUNT = 37,
-	DCCPO_ACK_VECTOR_0 = 38,
-	DCCPO_ACK_VECTOR_1 = 39,
-	DCCPO_TIMESTAMP = 41,
-	DCCPO_TIMESTAMP_ECHO = 42,
-	DCCPO_ELAPSED_TIME = 43,
-	DCCPO_MAX = 45,
-	DCCPO_MIN_RX_CCID_SPECIFIC = 128,	/* from sender to receiver */
-	DCCPO_MAX_RX_CCID_SPECIFIC = 191,
-	DCCPO_MIN_TX_CCID_SPECIFIC = 192,	/* from receiver to sender */
-	DCCPO_MAX_TX_CCID_SPECIFIC = 255,
-};
-/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
-#define DCCP_SINGLE_OPT_MAXLEN	253
-
-/* DCCP CCIDS */
-enum {
-	DCCPC_CCID2 = 2,
-	DCCPC_CCID3 = 3,
-};
-
-/* DCCP features (RFC 4340 section 6.4) */
-enum dccp_feature_numbers {
-	DCCPF_RESERVED = 0,
-	DCCPF_CCID = 1,
-	DCCPF_SHORT_SEQNOS = 2,
-	DCCPF_SEQUENCE_WINDOW = 3,
-	DCCPF_ECN_INCAPABLE = 4,
-	DCCPF_ACK_RATIO = 5,
-	DCCPF_SEND_ACK_VECTOR = 6,
-	DCCPF_SEND_NDP_COUNT = 7,
-	DCCPF_MIN_CSUM_COVER = 8,
-	DCCPF_DATA_CHECKSUM = 9,
-	/* 10-127 reserved */
-	DCCPF_MIN_CCID_SPECIFIC = 128,
-	DCCPF_SEND_LEV_RATE = 192,	/* RFC 4342, sec. 8.4 */
-	DCCPF_MAX_CCID_SPECIFIC = 255,
-};
-
-/* DCCP socket control message types for cmsg */
-enum dccp_cmsg_type {
-	DCCP_SCM_PRIORITY = 1,
-	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
-	/* ^-- Up to here reserved exclusively for qpolicy parameters */
-	DCCP_SCM_MAX
-};
-
-/* DCCP priorities for outgoing/queued packets */
-enum dccp_packet_dequeueing_policy {
-	DCCPQ_POLICY_SIMPLE,
-	DCCPQ_POLICY_PRIO,
-	DCCPQ_POLICY_MAX
-};
-
-/* DCCP socket options */
-#define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
-#define DCCP_SOCKOPT_SERVICE		2
-#define DCCP_SOCKOPT_CHANGE_L		3
-#define DCCP_SOCKOPT_CHANGE_R		4
-#define DCCP_SOCKOPT_GET_CUR_MPS	5
-#define DCCP_SOCKOPT_SERVER_TIMEWAIT	6
-#define DCCP_SOCKOPT_SEND_CSCOV		10
-#define DCCP_SOCKOPT_RECV_CSCOV		11
-#define DCCP_SOCKOPT_AVAILABLE_CCIDS	12
-#define DCCP_SOCKOPT_CCID		13
-#define DCCP_SOCKOPT_TX_CCID		14
-#define DCCP_SOCKOPT_RX_CCID		15
-#define DCCP_SOCKOPT_QPOLICY_ID		16
-#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
-#define DCCP_SOCKOPT_CCID_RX_INFO	128
-#define DCCP_SOCKOPT_CCID_TX_INFO	192
-
-/* maximum number of services provided on the same listening port */
-#define DCCP_SERVICE_LIST_MAX_LEN      32
-
-#ifdef __KERNEL__
 
 #include <linux/in.h>
 #include <linux/interrupt.h>
@@ -246,6 +13,7 @@ enum dccp_packet_dequeueing_policy {
 #include <net/inet_sock.h>
 #include <net/inet_timewait_sock.h>
 #include <net/tcp_states.h>
+#include <uapi/linux/dccp.h>
 
 enum dccp_state {
 	DCCP_OPEN	     = TCP_ESTABLISHED,
@@ -551,6 +319,4 @@ static inline const char *dccp_role(const struct sock *sk)
 
 extern void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_DCCP_H */
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
index 520152411cd111fc2c0b94dbbf04069465de206c..1d47dcce11e1011e8a39a96b1c5fa10d0eb7bbca 100644
--- a/include/linux/dlm.h
+++ b/include/linux/dlm.h
@@ -10,68 +10,11 @@
 **
 *******************************************************************************
 ******************************************************************************/
-
 #ifndef __DLM_DOT_H__
 #define __DLM_DOT_H__
 
-/*
- * Interface to Distributed Lock Manager (DLM)
- * routines and structures to use DLM lockspaces
- */
-
-/* Lock levels and flags are here */
-#include <linux/dlmconstants.h>
-#include <linux/types.h>
-
-typedef void dlm_lockspace_t;
-
-/*
- * Lock status block
- *
- * Use this structure to specify the contents of the lock value block.  For a
- * conversion request, this structure is used to specify the lock ID of the
- * lock.  DLM writes the status of the lock request and the lock ID assigned
- * to the request in the lock status block.
- *
- * sb_lkid: the returned lock ID.  It is set on new (non-conversion) requests.
- * It is available when dlm_lock returns.
- *
- * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
- * shown for the DLM_LKF_VALBLK flag.
- *
- * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
- * it was first demoted to NL to avoid conversion deadlock.
- * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
- *
- * sb_status: the returned status of the lock request set prior to AST
- * execution.  Possible return values:
- *
- * 0 if lock request was successful
- * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
- * -DLM_EUNLOCK if unlock request was successful
- * -DLM_ECANCEL if a cancel completed successfully
- * -EDEADLK if a deadlock was detected
- * -ETIMEDOUT if the lock request was canceled due to a timeout
- */
-
-#define DLM_SBF_DEMOTED		0x01
-#define DLM_SBF_VALNOTVALID	0x02
-#define DLM_SBF_ALTMODE		0x04
+#include <uapi/linux/dlm.h>
 
-struct dlm_lksb {
-	int 	 sb_status;
-	__u32	 sb_lkid;
-	char 	 sb_flags;
-	char *	 sb_lvbptr;
-};
-
-/* dlm_new_lockspace() flags */
-
-#define DLM_LSFL_TIMEWARN	0x00000002
-#define DLM_LSFL_FS     	0x00000004
-#define DLM_LSFL_NEWEXCL     	0x00000008
-
-#ifdef __KERNEL__
 
 struct dlm_slot {
 	int nodeid; /* 1 to MAX_INT */
@@ -226,7 +169,4 @@ int dlm_unlock(dlm_lockspace_t *lockspace,
 	       struct dlm_lksb *lksb,
 	       void *astarg);
 
-#endif				/* __KERNEL__ */
-
 #endif				/* __DLM_DOT_H__ */
-
diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h
index 3b1cc1be419f8b13aa31be413360293c7de052a9..95ad387a7769e1b8e9ac968b7ad28e2f7b3b00f9 100644
--- a/include/linux/dlm_plock.h
+++ b/include/linux/dlm_plock.h
@@ -5,50 +5,15 @@
  * modify, copy, or redistribute it subject to the terms and conditions
  * of the GNU General Public License v.2.
  */
-
 #ifndef __DLM_PLOCK_DOT_H__
 #define __DLM_PLOCK_DOT_H__
 
-#include <linux/types.h>
-
-#define DLM_PLOCK_MISC_NAME		"dlm_plock"
-
-#define DLM_PLOCK_VERSION_MAJOR	1
-#define DLM_PLOCK_VERSION_MINOR	2
-#define DLM_PLOCK_VERSION_PATCH	0
-
-enum {
-	DLM_PLOCK_OP_LOCK = 1,
-	DLM_PLOCK_OP_UNLOCK,
-	DLM_PLOCK_OP_GET,
-};
+#include <uapi/linux/dlm_plock.h>
 
-#define DLM_PLOCK_FL_CLOSE 1
-
-struct dlm_plock_info {
-	__u32 version[3];
-	__u8 optype;
-	__u8 ex;
-	__u8 wait;
-	__u8 flags;
-	__u32 pid;
-	__s32 nodeid;
-	__s32 rv;
-	__u32 fsid;
-	__u64 number;
-	__u64 start;
-	__u64 end;
-	__u64 owner;
-};
-
-#ifdef __KERNEL__
 int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		int cmd, struct file_lock *fl);
 int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		struct file_lock *fl);
 int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		struct file_lock *fl);
-#endif /* __KERNEL__ */
-
 #endif
-
diff --git a/include/linux/edd.h b/include/linux/edd.h
index 4cbd0fe9df0898f09a4641270ebd89d0f7def56a..83d4371ec996c3f77a0470a4115fb01bb4fc4ce5 100644
--- a/include/linux/edd.h
+++ b/include/linux/edd.h
@@ -30,165 +30,9 @@
 #ifndef _LINUX_EDD_H
 #define _LINUX_EDD_H
 
-#include <linux/types.h>
-
-#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
-				   in boot_params - treat this as 1 byte  */
-#define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
-#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
-#define EDDEXTSIZE 8		/* change these if you muck with the structures */
-#define EDDPARMSIZE 74
-#define CHECKEXTENSIONSPRESENT 0x41
-#define GETDEVICEPARAMETERS 0x48
-#define LEGACYGETDEVICEPARAMETERS 0x08
-#define EDDMAGIC1 0x55AA
-#define EDDMAGIC2 0xAA55
-
-
-#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
-#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
-#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
-#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
-#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
-				     in boot_params - treat this as 1 byte  */
+#include <uapi/linux/edd.h>
 
 #ifndef __ASSEMBLY__
-
-#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
-#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
-#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
-#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
-
-#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
-#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
-#define EDD_INFO_REMOVABLE                     (1 << 2)
-#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
-#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
-#define EDD_INFO_LOCKABLE                      (1 << 5)
-#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
-#define EDD_INFO_USE_INT13_FN50                (1 << 7)
-
-struct edd_device_params {
-	__u16 length;
-	__u16 info_flags;
-	__u32 num_default_cylinders;
-	__u32 num_default_heads;
-	__u32 sectors_per_track;
-	__u64 number_of_sectors;
-	__u16 bytes_per_sector;
-	__u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
-	__u16 key;		/* = 0xBEDD */
-	__u8 device_path_info_length;	/* = 44 */
-	__u8 reserved2;
-	__u16 reserved3;
-	__u8 host_bus_type[4];
-	__u8 interface_type[8];
-	union {
-		struct {
-			__u16 base_address;
-			__u16 reserved1;
-			__u32 reserved2;
-		} __attribute__ ((packed)) isa;
-		struct {
-			__u8 bus;
-			__u8 slot;
-			__u8 function;
-			__u8 channel;
-			__u32 reserved;
-		} __attribute__ ((packed)) pci;
-		/* pcix is same as pci */
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) ibnd;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) xprs;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) htpt;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) unknown;
-	} interface_path;
-	union {
-		struct {
-			__u8 device;
-			__u8 reserved1;
-			__u16 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) ata;
-		struct {
-			__u8 device;
-			__u8 lun;
-			__u8 reserved1;
-			__u8 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) atapi;
-		struct {
-			__u16 id;
-			__u64 lun;
-			__u16 reserved1;
-			__u32 reserved2;
-		} __attribute__ ((packed)) scsi;
-		struct {
-			__u64 serial_number;
-			__u64 reserved;
-		} __attribute__ ((packed)) usb;
-		struct {
-			__u64 eui;
-			__u64 reserved;
-		} __attribute__ ((packed)) i1394;
-		struct {
-			__u64 wwid;
-			__u64 lun;
-		} __attribute__ ((packed)) fibre;
-		struct {
-			__u64 identity_tag;
-			__u64 reserved;
-		} __attribute__ ((packed)) i2o;
-		struct {
-			__u32 array_number;
-			__u32 reserved1;
-			__u64 reserved2;
-		} __attribute__ ((packed)) raid;
-		struct {
-			__u8 device;
-			__u8 reserved1;
-			__u16 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) sata;
-		struct {
-			__u64 reserved1;
-			__u64 reserved2;
-		} __attribute__ ((packed)) unknown;
-	} device_path;
-	__u8 reserved4;
-	__u8 checksum;
-} __attribute__ ((packed));
-
-struct edd_info {
-	__u8 device;
-	__u8 version;
-	__u16 interface_support;
-	__u16 legacy_max_cylinder;
-	__u8 legacy_max_head;
-	__u8 legacy_sectors_per_track;
-	struct edd_device_params params;
-} __attribute__ ((packed));
-
-struct edd {
-	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
-	struct edd_info edd_info[EDDMAXNR];
-	unsigned char mbr_signature_nr;
-	unsigned char edd_info_nr;
-};
-
-#ifdef __KERNEL__
 extern struct edd edd;
-#endif /* __KERNEL__ */
 #endif				/*!__ASSEMBLY__ */
-
 #endif				/* _LINUX_EDD_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 59ef40650e1ea19d107a62c76decec52c4d7797f..8c9048e3346357528f998eb39776073dda682b1b 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -1,420 +1,9 @@
 #ifndef _LINUX_ELF_H
 #define _LINUX_ELF_H
 
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#ifdef __KERNEL__
 #include <asm/elf.h>
-#endif
-
-/* 32-bit ELF base types. */
-typedef __u32	Elf32_Addr;
-typedef __u16	Elf32_Half;
-typedef __u32	Elf32_Off;
-typedef __s32	Elf32_Sword;
-typedef __u32	Elf32_Word;
-
-/* 64-bit ELF base types. */
-typedef __u64	Elf64_Addr;
-typedef __u16	Elf64_Half;
-typedef __s16	Elf64_SHalf;
-typedef __u64	Elf64_Off;
-typedef __s32	Elf64_Sword;
-typedef __u32	Elf64_Word;
-typedef __u64	Elf64_Xword;
-typedef __s64	Elf64_Sxword;
-
-/* These constants are for the segment types stored in the image headers */
-#define PT_NULL    0
-#define PT_LOAD    1
-#define PT_DYNAMIC 2
-#define PT_INTERP  3
-#define PT_NOTE    4
-#define PT_SHLIB   5
-#define PT_PHDR    6
-#define PT_TLS     7               /* Thread local storage segment */
-#define PT_LOOS    0x60000000      /* OS-specific */
-#define PT_HIOS    0x6fffffff      /* OS-specific */
-#define PT_LOPROC  0x70000000
-#define PT_HIPROC  0x7fffffff
-#define PT_GNU_EH_FRAME		0x6474e550
-
-#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
-
-/*
- * Extended Numbering
- *
- * If the real number of program header table entries is larger than
- * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
- * section header at index 0, and PN_XNUM is set to e_phnum
- * field. Otherwise, the section header at index 0 is zero
- * initialized, if it exists.
- *
- * Specifications are available in:
- *
- * - Sun microsystems: Linker and Libraries.
- *   Part No: 817-1984-17, September 2008.
- *   URL: http://docs.sun.com/app/docs/doc/817-1984
- *
- * - System V ABI AMD64 Architecture Processor Supplement
- *   Draft Version 0.99.,
- *   May 11, 2009.
- *   URL: http://www.x86-64.org/
- */
-#define PN_XNUM 0xffff
-
-/* These constants define the different elf file types */
-#define ET_NONE   0
-#define ET_REL    1
-#define ET_EXEC   2
-#define ET_DYN    3
-#define ET_CORE   4
-#define ET_LOPROC 0xff00
-#define ET_HIPROC 0xffff
-
-/* This is the info that is needed to parse the dynamic section of the file */
-#define DT_NULL		0
-#define DT_NEEDED	1
-#define DT_PLTRELSZ	2
-#define DT_PLTGOT	3
-#define DT_HASH		4
-#define DT_STRTAB	5
-#define DT_SYMTAB	6
-#define DT_RELA		7
-#define DT_RELASZ	8
-#define DT_RELAENT	9
-#define DT_STRSZ	10
-#define DT_SYMENT	11
-#define DT_INIT		12
-#define DT_FINI		13
-#define DT_SONAME	14
-#define DT_RPATH 	15
-#define DT_SYMBOLIC	16
-#define DT_REL	        17
-#define DT_RELSZ	18
-#define DT_RELENT	19
-#define DT_PLTREL	20
-#define DT_DEBUG	21
-#define DT_TEXTREL	22
-#define DT_JMPREL	23
-#define DT_ENCODING	32
-#define OLD_DT_LOOS	0x60000000
-#define DT_LOOS		0x6000000d
-#define DT_HIOS		0x6ffff000
-#define DT_VALRNGLO	0x6ffffd00
-#define DT_VALRNGHI	0x6ffffdff
-#define DT_ADDRRNGLO	0x6ffffe00
-#define DT_ADDRRNGHI	0x6ffffeff
-#define DT_VERSYM	0x6ffffff0
-#define DT_RELACOUNT	0x6ffffff9
-#define DT_RELCOUNT	0x6ffffffa
-#define DT_FLAGS_1	0x6ffffffb
-#define DT_VERDEF	0x6ffffffc
-#define	DT_VERDEFNUM	0x6ffffffd
-#define DT_VERNEED	0x6ffffffe
-#define	DT_VERNEEDNUM	0x6fffffff
-#define OLD_DT_HIOS     0x6fffffff
-#define DT_LOPROC	0x70000000
-#define DT_HIPROC	0x7fffffff
-
-/* This info is needed when parsing the symbol table */
-#define STB_LOCAL  0
-#define STB_GLOBAL 1
-#define STB_WEAK   2
-
-#define STT_NOTYPE  0
-#define STT_OBJECT  1
-#define STT_FUNC    2
-#define STT_SECTION 3
-#define STT_FILE    4
-#define STT_COMMON  5
-#define STT_TLS     6
-
-#define ELF_ST_BIND(x)		((x) >> 4)
-#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
-#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
-#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
-#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
-#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
-
-typedef struct dynamic{
-  Elf32_Sword d_tag;
-  union{
-    Elf32_Sword	d_val;
-    Elf32_Addr	d_ptr;
-  } d_un;
-} Elf32_Dyn;
-
-typedef struct {
-  Elf64_Sxword d_tag;		/* entry tag value */
-  union {
-    Elf64_Xword d_val;
-    Elf64_Addr d_ptr;
-  } d_un;
-} Elf64_Dyn;
-
-/* The following are used with relocations */
-#define ELF32_R_SYM(x) ((x) >> 8)
-#define ELF32_R_TYPE(x) ((x) & 0xff)
-
-#define ELF64_R_SYM(i)			((i) >> 32)
-#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-
-typedef struct elf32_rel {
-  Elf32_Addr	r_offset;
-  Elf32_Word	r_info;
-} Elf32_Rel;
-
-typedef struct elf64_rel {
-  Elf64_Addr r_offset;	/* Location at which to apply the action */
-  Elf64_Xword r_info;	/* index and type of relocation */
-} Elf64_Rel;
-
-typedef struct elf32_rela{
-  Elf32_Addr	r_offset;
-  Elf32_Word	r_info;
-  Elf32_Sword	r_addend;
-} Elf32_Rela;
-
-typedef struct elf64_rela {
-  Elf64_Addr r_offset;	/* Location at which to apply the action */
-  Elf64_Xword r_info;	/* index and type of relocation */
-  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
-} Elf64_Rela;
-
-typedef struct elf32_sym{
-  Elf32_Word	st_name;
-  Elf32_Addr	st_value;
-  Elf32_Word	st_size;
-  unsigned char	st_info;
-  unsigned char	st_other;
-  Elf32_Half	st_shndx;
-} Elf32_Sym;
-
-typedef struct elf64_sym {
-  Elf64_Word st_name;		/* Symbol name, index in string tbl */
-  unsigned char	st_info;	/* Type and binding attributes */
-  unsigned char	st_other;	/* No defined meaning, 0 */
-  Elf64_Half st_shndx;		/* Associated section index */
-  Elf64_Addr st_value;		/* Value of the symbol */
-  Elf64_Xword st_size;		/* Associated symbol size */
-} Elf64_Sym;
-
-
-#define EI_NIDENT	16
-
-typedef struct elf32_hdr{
-  unsigned char	e_ident[EI_NIDENT];
-  Elf32_Half	e_type;
-  Elf32_Half	e_machine;
-  Elf32_Word	e_version;
-  Elf32_Addr	e_entry;  /* Entry point */
-  Elf32_Off	e_phoff;
-  Elf32_Off	e_shoff;
-  Elf32_Word	e_flags;
-  Elf32_Half	e_ehsize;
-  Elf32_Half	e_phentsize;
-  Elf32_Half	e_phnum;
-  Elf32_Half	e_shentsize;
-  Elf32_Half	e_shnum;
-  Elf32_Half	e_shstrndx;
-} Elf32_Ehdr;
-
-typedef struct elf64_hdr {
-  unsigned char	e_ident[EI_NIDENT];	/* ELF "magic number" */
-  Elf64_Half e_type;
-  Elf64_Half e_machine;
-  Elf64_Word e_version;
-  Elf64_Addr e_entry;		/* Entry point virtual address */
-  Elf64_Off e_phoff;		/* Program header table file offset */
-  Elf64_Off e_shoff;		/* Section header table file offset */
-  Elf64_Word e_flags;
-  Elf64_Half e_ehsize;
-  Elf64_Half e_phentsize;
-  Elf64_Half e_phnum;
-  Elf64_Half e_shentsize;
-  Elf64_Half e_shnum;
-  Elf64_Half e_shstrndx;
-} Elf64_Ehdr;
-
-/* These constants define the permissions on sections in the program
-   header, p_flags. */
-#define PF_R		0x4
-#define PF_W		0x2
-#define PF_X		0x1
-
-typedef struct elf32_phdr{
-  Elf32_Word	p_type;
-  Elf32_Off	p_offset;
-  Elf32_Addr	p_vaddr;
-  Elf32_Addr	p_paddr;
-  Elf32_Word	p_filesz;
-  Elf32_Word	p_memsz;
-  Elf32_Word	p_flags;
-  Elf32_Word	p_align;
-} Elf32_Phdr;
-
-typedef struct elf64_phdr {
-  Elf64_Word p_type;
-  Elf64_Word p_flags;
-  Elf64_Off p_offset;		/* Segment file offset */
-  Elf64_Addr p_vaddr;		/* Segment virtual address */
-  Elf64_Addr p_paddr;		/* Segment physical address */
-  Elf64_Xword p_filesz;		/* Segment size in file */
-  Elf64_Xword p_memsz;		/* Segment size in memory */
-  Elf64_Xword p_align;		/* Segment alignment, file & memory */
-} Elf64_Phdr;
-
-/* sh_type */
-#define SHT_NULL	0
-#define SHT_PROGBITS	1
-#define SHT_SYMTAB	2
-#define SHT_STRTAB	3
-#define SHT_RELA	4
-#define SHT_HASH	5
-#define SHT_DYNAMIC	6
-#define SHT_NOTE	7
-#define SHT_NOBITS	8
-#define SHT_REL		9
-#define SHT_SHLIB	10
-#define SHT_DYNSYM	11
-#define SHT_NUM		12
-#define SHT_LOPROC	0x70000000
-#define SHT_HIPROC	0x7fffffff
-#define SHT_LOUSER	0x80000000
-#define SHT_HIUSER	0xffffffff
-
-/* sh_flags */
-#define SHF_WRITE	0x1
-#define SHF_ALLOC	0x2
-#define SHF_EXECINSTR	0x4
-#define SHF_MASKPROC	0xf0000000
-
-/* special section indexes */
-#define SHN_UNDEF	0
-#define SHN_LORESERVE	0xff00
-#define SHN_LOPROC	0xff00
-#define SHN_HIPROC	0xff1f
-#define SHN_ABS		0xfff1
-#define SHN_COMMON	0xfff2
-#define SHN_HIRESERVE	0xffff
- 
-typedef struct elf32_shdr {
-  Elf32_Word	sh_name;
-  Elf32_Word	sh_type;
-  Elf32_Word	sh_flags;
-  Elf32_Addr	sh_addr;
-  Elf32_Off	sh_offset;
-  Elf32_Word	sh_size;
-  Elf32_Word	sh_link;
-  Elf32_Word	sh_info;
-  Elf32_Word	sh_addralign;
-  Elf32_Word	sh_entsize;
-} Elf32_Shdr;
-
-typedef struct elf64_shdr {
-  Elf64_Word sh_name;		/* Section name, index in string tbl */
-  Elf64_Word sh_type;		/* Type of section */
-  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
-  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
-  Elf64_Off sh_offset;		/* Section file offset */
-  Elf64_Xword sh_size;		/* Size of section in bytes */
-  Elf64_Word sh_link;		/* Index of another section */
-  Elf64_Word sh_info;		/* Additional section information */
-  Elf64_Xword sh_addralign;	/* Section alignment */
-  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
-} Elf64_Shdr;
-
-#define	EI_MAG0		0		/* e_ident[] indexes */
-#define	EI_MAG1		1
-#define	EI_MAG2		2
-#define	EI_MAG3		3
-#define	EI_CLASS	4
-#define	EI_DATA		5
-#define	EI_VERSION	6
-#define	EI_OSABI	7
-#define	EI_PAD		8
-
-#define	ELFMAG0		0x7f		/* EI_MAG */
-#define	ELFMAG1		'E'
-#define	ELFMAG2		'L'
-#define	ELFMAG3		'F'
-#define	ELFMAG		"\177ELF"
-#define	SELFMAG		4
-
-#define	ELFCLASSNONE	0		/* EI_CLASS */
-#define	ELFCLASS32	1
-#define	ELFCLASS64	2
-#define	ELFCLASSNUM	3
-
-#define ELFDATANONE	0		/* e_ident[EI_DATA] */
-#define ELFDATA2LSB	1
-#define ELFDATA2MSB	2
-
-#define EV_NONE		0		/* e_version, EI_VERSION */
-#define EV_CURRENT	1
-#define EV_NUM		2
-
-#define ELFOSABI_NONE	0
-#define ELFOSABI_LINUX	3
-
-#ifndef ELF_OSABI
-#define ELF_OSABI ELFOSABI_NONE
-#endif
-
-/*
- * Notes used in ET_CORE. Architectures export some of the arch register sets
- * using the corresponding note types via the PTRACE_GETREGSET and
- * PTRACE_SETREGSET requests.
- */
-#define NT_PRSTATUS	1
-#define NT_PRFPREG	2
-#define NT_PRPSINFO	3
-#define NT_TASKSTRUCT	4
-#define NT_AUXV		6
-/*
- * Note to userspace developers: size of NT_SIGINFO note may increase
- * in the future to accomodate more fields, don't assume it is fixed!
- */
-#define NT_SIGINFO      0x53494749
-#define NT_FILE         0x46494c45
-#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
-#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-#define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
-#define NT_S390_TIMER	0x301		/* s390 timer register */
-#define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
-#define NT_S390_TODPREG	0x303		/* s390 TOD programmable register */
-#define NT_S390_CTRS	0x304		/* s390 control registers */
-#define NT_S390_PREFIX	0x305		/* s390 prefix register */
-#define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
-#define NT_S390_SYSTEM_CALL	0x307	/* s390 system call restart data */
-#define NT_S390_TDB	0x308		/* s390 transaction diagnostic block */
-#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
-#define NT_ARM_TLS	0x401		/* ARM TLS register */
-#define NT_ARM_HW_BREAK	0x402		/* ARM hardware breakpoint registers */
-#define NT_ARM_HW_WATCH	0x403		/* ARM hardware watchpoint registers */
-
-
-/* Note header in a PT_NOTE section */
-typedef struct elf32_note {
-  Elf32_Word	n_namesz;	/* Name size */
-  Elf32_Word	n_descsz;	/* Content size */
-  Elf32_Word	n_type;		/* Content type */
-} Elf32_Nhdr;
-
-/* Note header in a PT_NOTE section */
-typedef struct elf64_note {
-  Elf64_Word n_namesz;	/* Name size */
-  Elf64_Word n_descsz;	/* Content size */
-  Elf64_Word n_type;	/* Content type */
-} Elf64_Nhdr;
+#include <uapi/linux/elf.h>
 
-#ifdef __KERNEL__
 #ifndef elf_read_implies_exec
   /* Executables for which elf_read_implies_exec() returns TRUE will
      have the READ_IMPLIES_EXEC personality flag set automatically.
@@ -455,5 +44,4 @@ static inline int elf_coredump_extra_notes_write(struct file *file,
 extern int elf_coredump_extra_notes_size(void);
 extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
 #endif
-#endif /* __KERNEL__ */
 #endif /* _LINUX_ELF_H */
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 0698c79fbcb2c19453d73e15ad4d903e8b610cc3..cdd3d13efce7c24da5e65fc3d651b1564c3a20e0 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -1,109 +1,11 @@
 #ifndef _LINUX_ELFCORE_H
 #define _LINUX_ELFCORE_H
 
-#include <linux/types.h>
-#include <linux/signal.h>
-#include <linux/time.h>
-#ifdef __KERNEL__
 #include <linux/user.h>
 #include <linux/bug.h>
-#endif
-#include <linux/ptrace.h>
-#include <linux/elf.h>
-#include <linux/fs.h>
-
-struct elf_siginfo
-{
-	int	si_signo;			/* signal number */
-	int	si_code;			/* extra code */
-	int	si_errno;			/* errno */
-};
-
-#ifdef __KERNEL__
 #include <asm/elf.h>
-#endif
+#include <uapi/linux/elfcore.h>
 
-#ifndef __KERNEL__
-typedef elf_greg_t greg_t;
-typedef elf_gregset_t gregset_t;
-typedef elf_fpregset_t fpregset_t;
-typedef elf_fpxregset_t fpxregset_t;
-#define NGREG ELF_NGREG
-#endif
-
-/*
- * Definitions to generate Intel SVR4-like core files.
- * These mostly have the same names as the SVR4 types with "elf_"
- * tacked on the front to prevent clashes with linux definitions,
- * and the typedef forms have been avoided.  This is mostly like
- * the SVR4 structure, but more Linuxy, with things that Linux does
- * not support and which gdb doesn't really use excluded.
- * Fields present but not used are marked with "XXX".
- */
-struct elf_prstatus
-{
-#if 0
-	long	pr_flags;	/* XXX Process flags */
-	short	pr_why;		/* XXX Reason for process halt */
-	short	pr_what;	/* XXX More detailed reason */
-#endif
-	struct elf_siginfo pr_info;	/* Info associated with signal */
-	short	pr_cursig;		/* Current signal */
-	unsigned long pr_sigpend;	/* Set of pending signals */
-	unsigned long pr_sighold;	/* Set of held signals */
-#if 0
-	struct sigaltstack pr_altstack;	/* Alternate stack info */
-	struct sigaction pr_action;	/* Signal action for current sig */
-#endif
-	pid_t	pr_pid;
-	pid_t	pr_ppid;
-	pid_t	pr_pgrp;
-	pid_t	pr_sid;
-	struct timeval pr_utime;	/* User time */
-	struct timeval pr_stime;	/* System time */
-	struct timeval pr_cutime;	/* Cumulative user time */
-	struct timeval pr_cstime;	/* Cumulative system time */
-#if 0
-	long	pr_instr;		/* Current instruction */
-#endif
-	elf_gregset_t pr_reg;	/* GP registers */
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-	/* When using FDPIC, the loadmap addresses need to be communicated
-	 * to GDB in order for GDB to do the necessary relocations.  The
-	 * fields (below) used to communicate this information are placed
-	 * immediately after ``pr_reg'', so that the loadmap addresses may
-	 * be viewed as part of the register set if so desired.
-	 */
-	unsigned long pr_exec_fdpic_loadmap;
-	unsigned long pr_interp_fdpic_loadmap;
-#endif
-	int pr_fpvalid;		/* True if math co-processor being used.  */
-};
-
-#define ELF_PRARGSZ	(80)	/* Number of chars for args */
-
-struct elf_prpsinfo
-{
-	char	pr_state;	/* numeric process state */
-	char	pr_sname;	/* char for pr_state */
-	char	pr_zomb;	/* zombie */
-	char	pr_nice;	/* nice val */
-	unsigned long pr_flag;	/* flags */
-	__kernel_uid_t	pr_uid;
-	__kernel_gid_t	pr_gid;
-	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
-	/* Lots missing */
-	char	pr_fname[16];	/* filename of executable */
-	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
-};
-
-#ifndef __KERNEL__
-typedef struct elf_prstatus prstatus_t;
-typedef struct elf_prpsinfo prpsinfo_t;
-#define PRARGSZ ELF_PRARGSZ 
-#endif
-
-#ifdef __KERNEL__
 static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
 {
 #ifdef ELF_CORE_COPY_REGS
@@ -167,6 +69,4 @@ extern int
 elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit);
 extern size_t elf_core_extra_data_size(void);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_ELFCORE_H */
diff --git a/include/linux/errno.h b/include/linux/errno.h
index e0de516374da37de6a95c35e79ab7cabb899d177..f6bf082d4d4f3afdf4fedcd606c1d15d7120b84c 100644
--- a/include/linux/errno.h
+++ b/include/linux/errno.h
@@ -1,9 +1,8 @@
 #ifndef _LINUX_ERRNO_H
 #define _LINUX_ERRNO_H
 
-#include <asm/errno.h>
+#include <uapi/linux/errno.h>
 
-#ifdef __KERNEL__
 
 /*
  * These should never be seen by user programs.  To return one of ERESTART*
@@ -32,5 +31,3 @@
 #define EIOCBRETRY	530	/* iocb queued, will trigger a retry */
 
 #endif
-
-#endif
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index fd0628be45ce22ecc07ff1be9db1cdc18fdf2b80..9ca23fcfb5d73131b564ad81d887929abc0e954b 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -1,33 +1,12 @@
 #ifndef _LINUX_ERRQUEUE_H
 #define _LINUX_ERRQUEUE_H 1
 
-#include <linux/types.h>
-
-struct sock_extended_err {
-	__u32	ee_errno;	
-	__u8	ee_origin;
-	__u8	ee_type;
-	__u8	ee_code;
-	__u8	ee_pad;
-	__u32   ee_info;
-	__u32   ee_data;
-};
-
-#define SO_EE_ORIGIN_NONE	0
-#define SO_EE_ORIGIN_LOCAL	1
-#define SO_EE_ORIGIN_ICMP	2
-#define SO_EE_ORIGIN_ICMP6	3
-#define SO_EE_ORIGIN_TXSTATUS	4
-#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
-
-#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
-
-#ifdef __KERNEL__
 
 #include <net/ip.h>
 #if IS_ENABLED(CONFIG_IPV6)
 #include <linux/ipv6.h>
 #endif
+#include <uapi/linux/errqueue.h>
 
 #define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
 
@@ -44,5 +23,3 @@ struct sock_exterr_skb {
 };
 
 #endif
-
-#endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index fcb4f8e60c1cbe8aa4b0f190cdd7815d25057f2c..c8e3e7e39c6bf26ffbfe534cdfa83f59ad561372 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -9,596 +9,12 @@
  *                                scott.feldman@intel.com)
  * Portions Copyright (C) Sun Microsystems 2008
  */
-
 #ifndef _LINUX_ETHTOOL_H
 #define _LINUX_ETHTOOL_H
 
-#ifdef __KERNEL__
 #include <linux/compat.h>
-#endif
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* This should work for both 32 and 64 bit userland. */
-struct ethtool_cmd {
-	__u32	cmd;
-	__u32	supported;	/* Features this interface supports */
-	__u32	advertising;	/* Features this interface advertises */
-	__u16	speed;	        /* The forced speed (lower bits) in
-				 * Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	duplex;		/* Duplex, half or full */
-	__u8	port;		/* Which connector port */
-	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
-				 * May be read-only or read-write
-				 * depending on the driver.
-				 */
-	__u8	transceiver;	/* Which transceiver to use */
-	__u8	autoneg;	/* Enable or disable autonegotiation */
-	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
-				 * Not set by all drivers.
-				 */
-	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
-	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u16	speed_hi;       /* The forced speed (upper
-				 * bits) in Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
-	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
-				   * link should be renegotiated if necessary
-				   */
-	__u32	lp_advertising;	/* Features the link partner advertises */
-	__u32	reserved[2];
-};
-
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
-					 __u32 speed)
-{
-
-	ep->speed = (__u16)speed;
-	ep->speed_hi = (__u16)(speed >> 16);
-}
-
-static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
-{
-	return (ep->speed_hi << 16) | ep->speed;
-}
-
-/* Device supports clause 22 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h>.  This should not be
- * set if there are known to be no such peripherals present or if
- * the driver only emulates clause 22 registers for compatibility.
- */
-#define ETH_MDIO_SUPPORTS_C22	1
-
-/* Device supports clause 45 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
- * This should not be set if there are known to be no such peripherals
- * present.
- */
-#define ETH_MDIO_SUPPORTS_C45	2
-
-#define ETHTOOL_FWVERS_LEN	32
-#define ETHTOOL_BUSINFO_LEN	32
-/* these strings are set to whatever the driver author decides... */
-struct ethtool_drvinfo {
-	__u32	cmd;
-	char	driver[32];	/* driver short name, "tulip", "eepro100" */
-	char	version[32];	/* driver version string */
-	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
-	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
-				/* For PCI devices, use pci_name(pci_dev). */
-	char	reserved1[32];
-	char	reserved2[12];
-				/*
-				 * Some struct members below are filled in
-				 * using ops->get_sset_count().  Obtaining
-				 * this info from ethtool_drvinfo is now
-				 * deprecated; Use ETHTOOL_GSSET_INFO
-				 * instead.
-				 */
-	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
-	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
-	__u32	testinfo_len;
-	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
-	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
-};
-
-#define SOPASS_MAX	6
-/* wake-on-lan settings */
-struct ethtool_wolinfo {
-	__u32	cmd;
-	__u32	supported;
-	__u32	wolopts;
-	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
-};
-
-/* for passing single values */
-struct ethtool_value {
-	__u32	cmd;
-	__u32	data;
-};
-
-/* for passing big chunks of data */
-struct ethtool_regs {
-	__u32	cmd;
-	__u32	version; /* driver-specific, indicates different chips/revs */
-	__u32	len; /* bytes */
-	__u8	data[0];
-};
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
-	__u32	cmd;
-	__u32	magic;
-	__u32	offset; /* in bytes */
-	__u32	len; /* in bytes */
-	__u8	data[0];
-};
-
-/**
- * struct ethtool_eee - Energy Efficient Ethernet information
- * @cmd: ETHTOOL_{G,S}EEE
- * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
- *	for which there is EEE support.
- * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
- *	advertised as eee capable.
- * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
- *	combinations advertised by the link partner as eee capable.
- * @eee_active: Result of the eee auto negotiation.
- * @eee_enabled: EEE configured mode (enabled/disabled).
- * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
- *	that eee was negotiated.
- * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
- *	its tx lpi (after reaching 'idle' state). Effective only when eee
- *	was negotiated and tx_lpi_enabled was set.
- */
-struct ethtool_eee {
-	__u32	cmd;
-	__u32	supported;
-	__u32	advertised;
-	__u32	lp_advertised;
-	__u32	eee_active;
-	__u32	eee_enabled;
-	__u32	tx_lpi_enabled;
-	__u32	tx_lpi_timer;
-	__u32	reserved[2];
-};
-
-/**
- * struct ethtool_modinfo - plugin module eeprom information
- * @cmd: %ETHTOOL_GMODULEINFO
- * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
- * @eeprom_len: Length of the eeprom
- *
- * This structure is used to return the information to
- * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
- * The type code indicates the eeprom data format
- */
-struct ethtool_modinfo {
-	__u32   cmd;
-	__u32   type;
-	__u32   eeprom_len;
-	__u32   reserved[8];
-};
-
-/**
- * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
- * @cmd: ETHTOOL_{G,S}COALESCE
- * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
- *	a packet arrives.
- * @rx_max_coalesced_frames: Maximum number of packets to receive
- *	before an RX interrupt.
- * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
- *	this value applies while an IRQ is being serviced by the host.
- * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
- *	except that this value applies while an IRQ is being serviced
- *	by the host.
- * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
- *	a packet is sent.
- * @tx_max_coalesced_frames: Maximum number of packets to be sent
- *	before a TX interrupt.
- * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
- *	this value applies while an IRQ is being serviced by the host.
- * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
- *	except that this value applies while an IRQ is being serviced
- *	by the host.
- * @stats_block_coalesce_usecs: How many usecs to delay in-memory
- *	statistics block updates.  Some drivers do not have an
- *	in-memory statistic block, and in such cases this value is
- *	ignored.  This value must not be zero.
- * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
- * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
- * @pkt_rate_low: Threshold for low packet rate (packets per second).
- * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
- *	a packet arrives, when the packet rate is below @pkt_rate_low.
- * @rx_max_coalesced_frames_low: Maximum number of packets to be received
- *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
- * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
- *	a packet is sent, when the packet rate is below @pkt_rate_low.
- * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
- *	a TX interrupt, when the packet rate is below @pkt_rate_low.
- * @pkt_rate_high: Threshold for high packet rate (packets per second).
- * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
- *	a packet arrives, when the packet rate is above @pkt_rate_high.
- * @rx_max_coalesced_frames_high: Maximum number of packets to be received
- *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
- * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
- *	a packet is sent, when the packet rate is above @pkt_rate_high.
- * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
- *	a TX interrupt, when the packet rate is above @pkt_rate_high.
- * @rate_sample_interval: How often to do adaptive coalescing packet rate
- *	sampling, measured in seconds.  Must not be zero.
- *
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
- *	(usecs > 0 && time_since_first_completion >= usecs) ||
- *	(max_frames > 0 && completed_frames >= max_frames)
- * It is illegal to set both usecs and max_frames to zero as this
- * would cause interrupts to never be generated.  To disable
- * coalescing, set usecs = 0 and max_frames = 1.
- *
- * Some implementations ignore the value of max_frames and use the
- * condition:
- *	time_since_first_completion >= usecs
- * This is deprecated.  Drivers for hardware that does not support
- * counting completions should validate that max_frames == !rx_usecs.
- *
- * Adaptive RX/TX coalescing is an algorithm implemented by some
- * drivers to improve latency under low packet rates and improve
- * throughput under high packet rates.  Some drivers only implement
- * one of RX or TX adaptive coalescing.  Anything not implemented by
- * the driver causes these values to be silently ignored.
- *
- * When the packet rate is below @pkt_rate_high but above
- * @pkt_rate_low (both measured in packets per second) the
- * normal {rx,tx}_* coalescing parameters are used.
- */
-struct ethtool_coalesce {
-	__u32	cmd;
-	__u32	rx_coalesce_usecs;
-	__u32	rx_max_coalesced_frames;
-	__u32	rx_coalesce_usecs_irq;
-	__u32	rx_max_coalesced_frames_irq;
-	__u32	tx_coalesce_usecs;
-	__u32	tx_max_coalesced_frames;
-	__u32	tx_coalesce_usecs_irq;
-	__u32	tx_max_coalesced_frames_irq;
-	__u32	stats_block_coalesce_usecs;
-	__u32	use_adaptive_rx_coalesce;
-	__u32	use_adaptive_tx_coalesce;
-	__u32	pkt_rate_low;
-	__u32	rx_coalesce_usecs_low;
-	__u32	rx_max_coalesced_frames_low;
-	__u32	tx_coalesce_usecs_low;
-	__u32	tx_max_coalesced_frames_low;
-	__u32	pkt_rate_high;
-	__u32	rx_coalesce_usecs_high;
-	__u32	rx_max_coalesced_frames_high;
-	__u32	tx_coalesce_usecs_high;
-	__u32	tx_max_coalesced_frames_high;
-	__u32	rate_sample_interval;
-};
-
-/* for configuring RX/TX ring parameters */
-struct ethtool_ringparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
-
-	/* Read only attributes.  These indicate the maximum number
-	 * of pending RX/TX ring entries the driver will allow the
-	 * user to set.
-	 */
-	__u32	rx_max_pending;
-	__u32	rx_mini_max_pending;
-	__u32	rx_jumbo_max_pending;
-	__u32	tx_max_pending;
-
-	/* Values changeable by the user.  The valid values are
-	 * in the range 1 to the "*_max_pending" counterpart above.
-	 */
-	__u32	rx_pending;
-	__u32	rx_mini_pending;
-	__u32	rx_jumbo_pending;
-	__u32	tx_pending;
-};
-
-/**
- * struct ethtool_channels - configuring number of network channel
- * @cmd: ETHTOOL_{G,S}CHANNELS
- * @max_rx: Read only. Maximum number of receive channel the driver support.
- * @max_tx: Read only. Maximum number of transmit channel the driver support.
- * @max_other: Read only. Maximum number of other channel the driver support.
- * @max_combined: Read only. Maximum number of combined channel the driver
- *	support. Set of queues RX, TX or other.
- * @rx_count: Valid values are in the range 1 to the max_rx.
- * @tx_count: Valid values are in the range 1 to the max_tx.
- * @other_count: Valid values are in the range 1 to the max_other.
- * @combined_count: Valid values are in the range 1 to the max_combined.
- *
- * This can be used to configure RX, TX and other channels.
- */
-
-struct ethtool_channels {
-	__u32	cmd;
-	__u32	max_rx;
-	__u32	max_tx;
-	__u32	max_other;
-	__u32	max_combined;
-	__u32	rx_count;
-	__u32	tx_count;
-	__u32	other_count;
-	__u32	combined_count;
-};
-
-/* for configuring link flow control parameters */
-struct ethtool_pauseparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
-
-	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
-	 * being true) the user may set 'autoneg' here non-zero to have the
-	 * pause parameters be auto-negotiated too.  In such a case, the
-	 * {rx,tx}_pause values below determine what capabilities are
-	 * advertised.
-	 *
-	 * If 'autoneg' is zero or the link is not being auto-negotiated,
-	 * then {rx,tx}_pause force the driver to use/not-use pause
-	 * flow control.
-	 */
-	__u32	autoneg;
-	__u32	rx_pause;
-	__u32	tx_pause;
-};
-
-#define ETH_GSTRING_LEN		32
-enum ethtool_stringset {
-	ETH_SS_TEST		= 0,
-	ETH_SS_STATS,
-	ETH_SS_PRIV_FLAGS,
-	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
-	ETH_SS_FEATURES,
-};
-
-/* for passing string sets for data tagging */
-struct ethtool_gstrings {
-	__u32	cmd;		/* ETHTOOL_GSTRINGS */
-	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
-	__u32	len;		/* number of strings in the string set */
-	__u8	data[0];
-};
-
-struct ethtool_sset_info {
-	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
-	__u32	reserved;
-	__u64	sset_mask;	/* input: each bit selects an sset to query */
-				/* output: each bit a returned sset */
-	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
-				   in sset_mask.  One bit implies one
-				   __u32, two bits implies two
-				   __u32's, etc. */
-};
-
-/**
- * enum ethtool_test_flags - flags definition of ethtool_test
- * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
- *	only online tests.
- * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
- * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
- *	test.
- * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
- */
-
-enum ethtool_test_flags {
-	ETH_TEST_FL_OFFLINE	= (1 << 0),
-	ETH_TEST_FL_FAILED	= (1 << 1),
-	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
-	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
-};
-
-/* for requesting NIC test and getting results*/
-struct ethtool_test {
-	__u32	cmd;		/* ETHTOOL_TEST */
-	__u32	flags;		/* ETH_TEST_FL_xxx */
-	__u32	reserved;
-	__u32	len;		/* result length, in number of u64 elements */
-	__u64	data[0];
-};
-
-/* for dumping NIC-specific statistics */
-struct ethtool_stats {
-	__u32	cmd;		/* ETHTOOL_GSTATS */
-	__u32	n_stats;	/* number of u64's being returned */
-	__u64	data[0];
-};
-
-struct ethtool_perm_addr {
-	__u32	cmd;		/* ETHTOOL_GPERMADDR */
-	__u32	size;
-	__u8	data[0];
-};
-
-/* boolean flags controlling per-interface behavior characteristics.
- * When reading, the flag indicates whether or not a certain behavior
- * is enabled/present.  When writing, the flag indicates whether
- * or not the driver should turn on (set) or off (clear) a behavior.
- *
- * Some behaviors may read-only (unconditionally absent or present).
- * If such is the case, return EINVAL in the set-flags operation if the
- * flag differs from the read-only value.
- */
-enum ethtool_flags {
-	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
-	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
-	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
-	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
-	ETH_FLAG_RXHASH		= (1 << 28),
-};
+#include <uapi/linux/ethtool.h>
 
-/* The following structures are for supporting RX network flow
- * classification and RX n-tuple configuration. Note, all multibyte
- * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
- * be in network byte order.
- */
-
-/**
- * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @psrc: Source port
- * @pdst: Destination port
- * @tos: Type-of-service
- *
- * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
- */
-struct ethtool_tcpip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be16	psrc;
-	__be16	pdst;
-	__u8    tos;
-};
-
-/**
- * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @spi: Security parameters index
- * @tos: Type-of-service
- *
- * This can be used to specify an IPsec transport or tunnel over IPv4.
- */
-struct ethtool_ah_espip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	spi;
-	__u8    tos;
-};
-
-#define	ETH_RX_NFC_IP4	1
-
-/**
- * struct ethtool_usrip4_spec - general flow specification for IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @l4_4_bytes: First 4 bytes of transport (layer 4) header
- * @tos: Type-of-service
- * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
- * @proto: Transport protocol number; mask must be 0
- */
-struct ethtool_usrip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	l4_4_bytes;
-	__u8    tos;
-	__u8    ip_ver;
-	__u8    proto;
-};
-
-union ethtool_flow_union {
-	struct ethtool_tcpip4_spec		tcp_ip4_spec;
-	struct ethtool_tcpip4_spec		udp_ip4_spec;
-	struct ethtool_tcpip4_spec		sctp_ip4_spec;
-	struct ethtool_ah_espip4_spec		ah_ip4_spec;
-	struct ethtool_ah_espip4_spec		esp_ip4_spec;
-	struct ethtool_usrip4_spec		usr_ip4_spec;
-	struct ethhdr				ether_spec;
-	__u8					hdata[60];
-};
-
-struct ethtool_flow_ext {
-	__be16	vlan_etype;
-	__be16	vlan_tci;
-	__be32	data[2];
-};
-
-/**
- * struct ethtool_rx_flow_spec - classification rule for RX flows
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow fields to match (dependent on @flow_type)
- * @h_ext: Additional fields to match
- * @m_u: Masks for flow field bits to be matched
- * @m_ext: Masks for additional field bits to be matched
- *	Note, all additional fields must be ignored unless @flow_type
- *	includes the %FLOW_EXT flag.
- * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
- *	if packets should be discarded
- * @location: Location of rule in the table.  Locations must be
- *	numbered such that a flow matching multiple rules will be
- *	classified according to the first (lowest numbered) rule.
- */
-struct ethtool_rx_flow_spec {
-	__u32		flow_type;
-	union ethtool_flow_union h_u;
-	struct ethtool_flow_ext h_ext;
-	union ethtool_flow_union m_u;
-	struct ethtool_flow_ext m_ext;
-	__u64		ring_cookie;
-	__u32		location;
-};
-
-/**
- * struct ethtool_rxnfc - command to get or set RX flow classification rules
- * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
- *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
- *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
- * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
- * @data: Command-dependent value
- * @fs: Flow classification rule
- * @rule_cnt: Number of rules to be affected
- * @rule_locs: Array of used rule locations
- *
- * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
- * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
- * structure fields must not be used.
- *
- * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
- * on return.
- *
- * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
- * rules on return.  If @data is non-zero on return then it is the
- * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
- * driver supports any special location values.  If that flag is not
- * set in @data then special location values should not be used.
- *
- * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
- * existing rule on entry and @fs contains the rule on return.
- *
- * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
- * user buffer for @rule_locs on entry.  On return, @data is the size
- * of the rule table, @rule_cnt is the number of defined rules, and
- * @rule_locs contains the locations of the defined rules.  Drivers
- * must use the second parameter to get_rxnfc() instead of @rule_locs.
- *
- * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
- * @fs.@location either specifies the location to use or is a special
- * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
- * @fs.@location is the actual rule location.
- *
- * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
- * existing rule on entry.
- *
- * A driver supporting the special location values for
- * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
- * location, and may remove a rule at a later location (lower
- * priority) that matches exactly the same set of flows.  The special
- * values are: %RX_CLS_LOC_ANY, selecting any location;
- * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
- * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
- * location (minimum priority).  Additional special values may be
- * defined in future and drivers must return -%EINVAL for any
- * unrecognised value.
- */
-struct ethtool_rxnfc {
-	__u32				cmd;
-	__u32				flow_type;
-	__u64				data;
-	struct ethtool_rx_flow_spec	fs;
-	__u32				rule_cnt;
-	__u32				rule_locs[0];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 struct compat_ethtool_rx_flow_spec {
@@ -621,223 +37,6 @@ struct compat_ethtool_rxnfc {
 };
 
 #endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
-/**
- * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
- * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
- * @size: On entry, the array size of the user buffer, which may be zero.
- *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
- *	indirection table.
- * @ring_index: RX ring/queue index for each hash value
- *
- * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
- * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
- * the table should be reset to default values.  This last feature
- * is not supported by the original implementations.
- */
-struct ethtool_rxfh_indir {
-	__u32	cmd;
-	__u32	size;
-	__u32	ring_index[0];
-};
-
-/**
- * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow field values to match (dependent on @flow_type)
- * @m_u: Masks for flow field value bits to be ignored
- * @vlan_tag: VLAN tag to match
- * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
- * @data: Driver-dependent data to match
- * @data_mask: Mask for driver-dependent data bits to be ignored
- * @action: RX ring/queue index to deliver to (non-negative) or other action
- *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
- *
- * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
- * a field value and mask are both zero this is treated as if all mask
- * bits are set i.e. the field is ignored.
- */
-struct ethtool_rx_ntuple_flow_spec {
-	__u32		 flow_type;
-	union {
-		struct ethtool_tcpip4_spec		tcp_ip4_spec;
-		struct ethtool_tcpip4_spec		udp_ip4_spec;
-		struct ethtool_tcpip4_spec		sctp_ip4_spec;
-		struct ethtool_ah_espip4_spec		ah_ip4_spec;
-		struct ethtool_ah_espip4_spec		esp_ip4_spec;
-		struct ethtool_usrip4_spec		usr_ip4_spec;
-		struct ethhdr				ether_spec;
-		__u8					hdata[72];
-	} h_u, m_u;
-
-	__u16	        vlan_tag;
-	__u16	        vlan_tag_mask;
-	__u64		data;
-	__u64		data_mask;
-
-	__s32		action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
-#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
-};
-
-/**
- * struct ethtool_rx_ntuple - command to set or clear RX flow filter
- * @cmd: Command number - %ETHTOOL_SRXNTUPLE
- * @fs: Flow filter specification
- */
-struct ethtool_rx_ntuple {
-	__u32					cmd;
-	struct ethtool_rx_ntuple_flow_spec	fs;
-};
-
-#define ETHTOOL_FLASH_MAX_FILENAME	128
-enum ethtool_flash_op_type {
-	ETHTOOL_FLASH_ALL_REGIONS	= 0,
-};
-
-/* for passing firmware flashing related parameters */
-struct ethtool_flash {
-	__u32	cmd;
-	__u32	region;
-	char	data[ETHTOOL_FLASH_MAX_FILENAME];
-};
-
-/**
- * struct ethtool_dump - used for retrieving, setting device dump
- * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
- * 	%ETHTOOL_SET_DUMP
- * @version: FW version of the dump, filled in by driver
- * @flag: driver dependent flag for dump setting, filled in by driver during
- *        get and filled in by ethtool for set operation.
- *        flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
- *        firmware dump is disabled.
- * @len: length of dump data, used as the length of the user buffer on entry to
- * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
- * 	 for %ETHTOOL_GET_DUMP_FLAG command
- * @data: data collected for get dump data operation
- */
-
-#define ETH_FW_DUMP_DISABLE 0
-
-struct ethtool_dump {
-	__u32	cmd;
-	__u32	version;
-	__u32	flag;
-	__u32	len;
-	__u8	data[0];
-};
-
-/* for returning and changing feature sets */
-
-/**
- * struct ethtool_get_features_block - block with state of 32 features
- * @available: mask of changeable features
- * @requested: mask of features requested to be enabled if possible
- * @active: mask of currently enabled features
- * @never_changed: mask of features not changeable for any device
- */
-struct ethtool_get_features_block {
-	__u32	available;
-	__u32	requested;
-	__u32	active;
-	__u32	never_changed;
-};
-
-/**
- * struct ethtool_gfeatures - command to get state of device's features
- * @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- *       out: number of elements in features[] needed to hold all features
- * @features: state of features
- */
-struct ethtool_gfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_get_features_block features[0];
-};
-
-/**
- * struct ethtool_set_features_block - block with request for 32 features
- * @valid: mask of features to be changed
- * @requested: values of features to be changed
- */
-struct ethtool_set_features_block {
-	__u32	valid;
-	__u32	requested;
-};
-
-/**
- * struct ethtool_sfeatures - command to request change in device's features
- * @cmd: command number = %ETHTOOL_SFEATURES
- * @size: array size of the features[] array
- * @features: feature change masks
- */
-struct ethtool_sfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_set_features_block features[0];
-};
-
-/**
- * struct ethtool_ts_info - holds a device's timestamping and PHC association
- * @cmd: command number = %ETHTOOL_GET_TS_INFO
- * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
- * @phc_index: device index of the associated PHC, or -1 if there is none
- * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
- * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
- *
- * The bits in the 'tx_types' and 'rx_filters' fields correspond to
- * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
- * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
- * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
- */
-struct ethtool_ts_info {
-	__u32	cmd;
-	__u32	so_timestamping;
-	__s32	phc_index;
-	__u32	tx_types;
-	__u32	tx_reserved[3];
-	__u32	rx_filters;
-	__u32	rx_reserved[3];
-};
-
-/*
- * %ETHTOOL_SFEATURES changes features present in features[].valid to the
- * values of corresponding bits in features[].requested. Bits in .requested
- * not set in .valid or not changeable are ignored.
- *
- * Returns %EINVAL when .valid contains undefined or never-changeable bits
- * or size is not equal to required number of features words (32-bit blocks).
- * Returns >= 0 if request was completed; bits set in the value mean:
- *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
- *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
- *	those bits were ignored.
- *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
- *      resulting state of bits masked by .valid is not equal to .requested.
- *      Probably there are other device-specific constraints on some features
- *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
- *      here as though ignored bits were cleared.
- *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
- *      compatibility functions. Requested offload state cannot be properly
- *      managed by kernel.
- *
- * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
- * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
- * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
- * significant bit in features[0] fields. Empty strings mark undefined features.
- */
-enum ethtool_sfeatures_retval_bits {
-	ETHTOOL_F_UNSUPPORTED__BIT,
-	ETHTOOL_F_WISH__BIT,
-	ETHTOOL_F_COMPAT__BIT,
-};
-
-#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
-#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
-#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
-
-#ifdef __KERNEL__
 
 #include <linux/rculist.h>
 
@@ -1049,277 +248,4 @@ struct ethtool_ops {
 
 
 };
-#endif /* __KERNEL__ */
-
-/* CMDs currently supported */
-#define ETHTOOL_GSET		0x00000001 /* Get settings. */
-#define ETHTOOL_SSET		0x00000002 /* Set settings. */
-#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
-#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
-#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
-#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
-#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
-/* Get link status for host, i.e. whether the interface *and* the
- * physical port (if there is one) are up (ethtool_value). */
-#define ETHTOOL_GLINK		0x0000000a
-#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
-#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
-#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
-#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
-#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
-#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
-#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
-#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
-					    * (ethtool_value) */
-#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
-					    * (ethtool_value). */
-#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
-#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
-#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
-#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
-#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
-#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
-#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
-#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
-#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
-#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
-#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
-#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
-
-#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
-#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
-#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
-#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
-#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
-#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
-#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
-#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
-#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
-#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
-#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
-#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
-#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
-#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
-#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
-#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
-
-#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
-#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
-#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
-#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
-#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
-#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
-#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
-#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
-#define ETHTOOL_GMODULEINFO	0x00000042 /* Get plug-in module information */
-#define ETHTOOL_GMODULEEEPROM	0x00000043 /* Get plug-in module eeprom */
-#define ETHTOOL_GEEE		0x00000044 /* Get EEE settings */
-#define ETHTOOL_SEEE		0x00000045 /* Set EEE settings */
-
-/* compatibility with older code */
-#define SPARC_ETH_GSET		ETHTOOL_GSET
-#define SPARC_ETH_SSET		ETHTOOL_SSET
-
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half		(1 << 0)
-#define SUPPORTED_10baseT_Full		(1 << 1)
-#define SUPPORTED_100baseT_Half		(1 << 2)
-#define SUPPORTED_100baseT_Full		(1 << 3)
-#define SUPPORTED_1000baseT_Half	(1 << 4)
-#define SUPPORTED_1000baseT_Full	(1 << 5)
-#define SUPPORTED_Autoneg		(1 << 6)
-#define SUPPORTED_TP			(1 << 7)
-#define SUPPORTED_AUI			(1 << 8)
-#define SUPPORTED_MII			(1 << 9)
-#define SUPPORTED_FIBRE			(1 << 10)
-#define SUPPORTED_BNC			(1 << 11)
-#define SUPPORTED_10000baseT_Full	(1 << 12)
-#define SUPPORTED_Pause			(1 << 13)
-#define SUPPORTED_Asym_Pause		(1 << 14)
-#define SUPPORTED_2500baseX_Full	(1 << 15)
-#define SUPPORTED_Backplane		(1 << 16)
-#define SUPPORTED_1000baseKX_Full	(1 << 17)
-#define SUPPORTED_10000baseKX4_Full	(1 << 18)
-#define SUPPORTED_10000baseKR_Full	(1 << 19)
-#define SUPPORTED_10000baseR_FEC	(1 << 20)
-#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
-#define SUPPORTED_20000baseKR2_Full	(1 << 22)
-#define SUPPORTED_40000baseKR4_Full	(1 << 23)
-#define SUPPORTED_40000baseCR4_Full	(1 << 24)
-#define SUPPORTED_40000baseSR4_Full	(1 << 25)
-#define SUPPORTED_40000baseLR4_Full	(1 << 26)
-
-/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half		(1 << 0)
-#define ADVERTISED_10baseT_Full		(1 << 1)
-#define ADVERTISED_100baseT_Half	(1 << 2)
-#define ADVERTISED_100baseT_Full	(1 << 3)
-#define ADVERTISED_1000baseT_Half	(1 << 4)
-#define ADVERTISED_1000baseT_Full	(1 << 5)
-#define ADVERTISED_Autoneg		(1 << 6)
-#define ADVERTISED_TP			(1 << 7)
-#define ADVERTISED_AUI			(1 << 8)
-#define ADVERTISED_MII			(1 << 9)
-#define ADVERTISED_FIBRE		(1 << 10)
-#define ADVERTISED_BNC			(1 << 11)
-#define ADVERTISED_10000baseT_Full	(1 << 12)
-#define ADVERTISED_Pause		(1 << 13)
-#define ADVERTISED_Asym_Pause		(1 << 14)
-#define ADVERTISED_2500baseX_Full	(1 << 15)
-#define ADVERTISED_Backplane		(1 << 16)
-#define ADVERTISED_1000baseKX_Full	(1 << 17)
-#define ADVERTISED_10000baseKX4_Full	(1 << 18)
-#define ADVERTISED_10000baseKR_Full	(1 << 19)
-#define ADVERTISED_10000baseR_FEC	(1 << 20)
-#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
-#define ADVERTISED_20000baseKR2_Full	(1 << 22)
-#define ADVERTISED_40000baseKR4_Full	(1 << 23)
-#define ADVERTISED_40000baseCR4_Full	(1 << 24)
-#define ADVERTISED_40000baseSR4_Full	(1 << 25)
-#define ADVERTISED_40000baseLR4_Full	(1 << 26)
-
-/* The following are all involved in forcing a particular link
- * mode for the device for setting things.  When getting the
- * devices settings, these indicate the current mode and whether
- * it was forced up into this mode or autonegotiated.
- */
-
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
-#define SPEED_10		10
-#define SPEED_100		100
-#define SPEED_1000		1000
-#define SPEED_2500		2500
-#define SPEED_10000		10000
-#define SPEED_UNKNOWN		-1
-
-/* Duplex, half or full. */
-#define DUPLEX_HALF		0x00
-#define DUPLEX_FULL		0x01
-#define DUPLEX_UNKNOWN		0xff
-
-/* Which connector port. */
-#define PORT_TP			0x00
-#define PORT_AUI		0x01
-#define PORT_MII		0x02
-#define PORT_FIBRE		0x03
-#define PORT_BNC		0x04
-#define PORT_DA			0x05
-#define PORT_NONE		0xef
-#define PORT_OTHER		0xff
-
-/* Which transceiver to use. */
-#define XCVR_INTERNAL		0x00
-#define XCVR_EXTERNAL		0x01
-#define XCVR_DUMMY1		0x02
-#define XCVR_DUMMY2		0x03
-#define XCVR_DUMMY3		0x04
-
-/* Enable or disable autonegotiation.  If this is set to enable,
- * the forced link modes above are completely ignored.
- */
-#define AUTONEG_DISABLE		0x00
-#define AUTONEG_ENABLE		0x01
-
-/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
- * the driver is required to renegotiate link
- */
-#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
-#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
-#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
-#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
-
-/* Wake-On-Lan options. */
-#define WAKE_PHY		(1 << 0)
-#define WAKE_UCAST		(1 << 1)
-#define WAKE_MCAST		(1 << 2)
-#define WAKE_BCAST		(1 << 3)
-#define WAKE_ARP		(1 << 4)
-#define WAKE_MAGIC		(1 << 5)
-#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
-
-/* L2-L4 network traffic flow types */
-#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
-#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
-#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
-#define	AH_ESP_V4_FLOW	0x04	/* hash only */
-#define	TCP_V6_FLOW	0x05	/* hash only */
-#define	UDP_V6_FLOW	0x06	/* hash only */
-#define	SCTP_V6_FLOW	0x07	/* hash only */
-#define	AH_ESP_V6_FLOW	0x08	/* hash only */
-#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
-#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
-#define	AH_V6_FLOW	0x0b	/* hash only */
-#define	ESP_V6_FLOW	0x0c	/* hash only */
-#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
-#define	IPV4_FLOW	0x10	/* hash only */
-#define	IPV6_FLOW	0x11	/* hash only */
-#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
-/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
-#define	FLOW_EXT	0x80000000
-
-/* L3-L4 network traffic flow hash options */
-#define	RXH_L2DA	(1 << 1)
-#define	RXH_VLAN	(1 << 2)
-#define	RXH_L3_PROTO	(1 << 3)
-#define	RXH_IP_SRC	(1 << 4)
-#define	RXH_IP_DST	(1 << 5)
-#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
-#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
-#define	RXH_DISCARD	(1 << 31)
-
-#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
-
-/* Special RX classification rule insert location values */
-#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
-#define RX_CLS_LOC_ANY		0xffffffff
-#define RX_CLS_LOC_FIRST	0xfffffffe
-#define RX_CLS_LOC_LAST		0xfffffffd
-
-/* EEPROM Standards for plug in modules */
-#define ETH_MODULE_SFF_8079		0x1
-#define ETH_MODULE_SFF_8079_LEN		256
-#define ETH_MODULE_SFF_8472		0x2
-#define ETH_MODULE_SFF_8472_LEN		512
-
-/* Reset flags */
-/* The reset() operation must clear the flags for the components which
- * were actually reset.  On successful return, the flags indicate the
- * components which were not reset, either because they do not exist
- * in the hardware or because they cannot be reset independently.  The
- * driver must never reset any components that were not requested.
- */
-enum ethtool_reset_flags {
-	/* These flags represent components dedicated to the interface
-	 * the command is addressed to.  Shift any flag left by
-	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
-	 * same type.
-	 */
-	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
-	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
-	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
-	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
-	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
-	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
-	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
-	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
-						 * multiple components */
-
-	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
-						 * this interface */
-	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
-						 * interface, even if shared */
-};
-#define ETH_RESET_SHARED_SHIFT	16
-
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 41085d0f3955b3ff247b426de9452b731d00c19b..6daf6d4971f65266c3c83e684af231dbafc452c0 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -10,59 +10,11 @@
  *  Davide Libenzi <davidel@xmailserver.org>
  *
  */
-
 #ifndef _LINUX_EVENTPOLL_H
 #define _LINUX_EVENTPOLL_H
 
-/* For O_CLOEXEC */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/* Flags for epoll_create1.  */
-#define EPOLL_CLOEXEC O_CLOEXEC
-
-/* Valid opcodes to issue to sys_epoll_ctl() */
-#define EPOLL_CTL_ADD 1
-#define EPOLL_CTL_DEL 2
-#define EPOLL_CTL_MOD 3
-#define EPOLL_CTL_DISABLE 4
-
-/*
- * Request the handling of system wakeup events so as to prevent system suspends
- * from happening while those events are being processed.
- *
- * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
- * re-allowed until epoll_wait is called again after consuming the wakeup
- * event(s).
- *
- * Requires CAP_BLOCK_SUSPEND
- */
-#define EPOLLWAKEUP (1 << 29)
-
-/* Set the One Shot behaviour for the target file descriptor */
-#define EPOLLONESHOT (1 << 30)
+#include <uapi/linux/eventpoll.h>
 
-/* Set the Edge Triggered behaviour for the target file descriptor */
-#define EPOLLET (1 << 31)
-
-/* 
- * On x86-64 make the 64bit structure have the same alignment as the
- * 32bit structure. This makes 32bit emulation easier.
- *
- * UML/x86_64 needs the same packing as x86_64
- */
-#ifdef __x86_64__
-#define EPOLL_PACKED __attribute__((packed))
-#else
-#define EPOLL_PACKED
-#endif
-
-struct epoll_event {
-	__u32 events;
-	__u64 data;
-} EPOLL_PACKED;
-
-#ifdef __KERNEL__
 
 /* Forward declarations to avoid compiler errors */
 struct file;
@@ -116,7 +68,4 @@ static inline void eventpoll_release(struct file *file) {}
 
 #endif
 
-#endif /* #ifdef __KERNEL__ */
-
 #endif /* #ifndef _LINUX_EVENTPOLL_H */
-
diff --git a/include/linux/falloc.h b/include/linux/falloc.h
index d39b824a780c2b48016e38370e36e039d192e90f..31591686ac2dd8ab88cee881d7fc42a896522525 100644
--- a/include/linux/falloc.h
+++ b/include/linux/falloc.h
@@ -1,11 +1,8 @@
 #ifndef _FALLOC_H_
 #define _FALLOC_H_
 
-#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
-#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
-#define FALLOC_FL_NO_HIDE_STALE	0x04 /* reserved codepoint */
+#include <uapi/linux/falloc.h>
 
-#ifdef __KERNEL__
 
 /*
  * Space reservation ioctls and argument structure
@@ -24,6 +21,4 @@ struct space_resv {
 #define FS_IOC_RESVSP		_IOW('X', 40, struct space_resv)
 #define FS_IOC_RESVSP64		_IOW('X', 42, struct space_resv)
 
-#endif /* __KERNEL__ */
-
 #endif /* _FALLOC_H_ */
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 6c6133f76e163c88041c4a13a4b091ef6ccf13ac..cef93ddcc5a0d16f4eccb53b454fb285c464d14b 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -1,120 +1,8 @@
 #ifndef _LINUX_FANOTIFY_H
 #define _LINUX_FANOTIFY_H
 
-#include <linux/types.h>
+#include <uapi/linux/fanotify.h>
 
-/* the following events that user-space can register for */
-#define FAN_ACCESS		0x00000001	/* File was accessed */
-#define FAN_MODIFY		0x00000002	/* File was modified */
-#define FAN_CLOSE_WRITE		0x00000008	/* Writtable file closed */
-#define FAN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define FAN_OPEN		0x00000020	/* File was opened */
-
-#define FAN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-
-#define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
-#define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
-
-#define FAN_ONDIR		0x40000000	/* event occurred against dir */
-
-#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
-
-/* helper events */
-#define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
-
-/* flags used for fanotify_init() */
-#define FAN_CLOEXEC		0x00000001
-#define FAN_NONBLOCK		0x00000002
-
-/* These are NOT bitwise flags.  Both bits are used togther.  */
-#define FAN_CLASS_NOTIF		0x00000000
-#define FAN_CLASS_CONTENT	0x00000004
-#define FAN_CLASS_PRE_CONTENT	0x00000008
-#define FAN_ALL_CLASS_BITS	(FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
-				 FAN_CLASS_PRE_CONTENT)
-
-#define FAN_UNLIMITED_QUEUE	0x00000010
-#define FAN_UNLIMITED_MARKS	0x00000020
-
-#define FAN_ALL_INIT_FLAGS	(FAN_CLOEXEC | FAN_NONBLOCK | \
-				 FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
-				 FAN_UNLIMITED_MARKS)
-
-/* flags used for fanotify_modify_mark() */
-#define FAN_MARK_ADD		0x00000001
-#define FAN_MARK_REMOVE		0x00000002
-#define FAN_MARK_DONT_FOLLOW	0x00000004
-#define FAN_MARK_ONLYDIR	0x00000008
-#define FAN_MARK_MOUNT		0x00000010
-#define FAN_MARK_IGNORED_MASK	0x00000020
-#define FAN_MARK_IGNORED_SURV_MODIFY	0x00000040
-#define FAN_MARK_FLUSH		0x00000080
-#ifdef __KERNEL__
 /* not valid from userspace, only kernel internal */
 #define FAN_MARK_ONDIR		0x00000100
-#endif
-
-#define FAN_ALL_MARK_FLAGS	(FAN_MARK_ADD |\
-				 FAN_MARK_REMOVE |\
-				 FAN_MARK_DONT_FOLLOW |\
-				 FAN_MARK_ONLYDIR |\
-				 FAN_MARK_MOUNT |\
-				 FAN_MARK_IGNORED_MASK |\
-				 FAN_MARK_IGNORED_SURV_MODIFY |\
-				 FAN_MARK_FLUSH)
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility.  Apps will get only the
- * events that they originally wanted.  Be sure to add new events here!
- */
-#define FAN_ALL_EVENTS (FAN_ACCESS |\
-			FAN_MODIFY |\
-			FAN_CLOSE |\
-			FAN_OPEN)
-
-/*
- * All events which require a permission response from userspace
- */
-#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
-			     FAN_ACCESS_PERM)
-
-#define FAN_ALL_OUTGOING_EVENTS	(FAN_ALL_EVENTS |\
-				 FAN_ALL_PERM_EVENTS |\
-				 FAN_Q_OVERFLOW)
-
-#define FANOTIFY_METADATA_VERSION	3
-
-struct fanotify_event_metadata {
-	__u32 event_len;
-	__u8 vers;
-	__u8 reserved;
-	__u16 metadata_len;
-	__aligned_u64 mask;
-	__s32 fd;
-	__s32 pid;
-};
-
-struct fanotify_response {
-	__s32 fd;
-	__u32 response;
-};
-
-/* Legit userspace responses to a _PERM event */
-#define FAN_ALLOW	0x01
-#define FAN_DENY	0x02
-/* No fd set in event */
-#define FAN_NOFD	-1
-
-/* Helper functions to deal with fanotify_event_metadata buffers */
-#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
-
-#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
-				   (struct fanotify_event_metadata*)(((char *)(meta)) + \
-				   (meta)->event_len))
-
-#define FAN_EVENT_OK(meta, len)	((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
-				(long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
-				(long)(meta)->event_len <= (long)(len))
-
 #endif /* _LINUX_FANOTIFY_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index ac3f1c605843201e8e3e4561bc84d2b910b9f5ba..c7a95714b1fe68e7f9b67e990a384cac0f490044 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1,409 +1,10 @@
 #ifndef _LINUX_FB_H
 #define _LINUX_FB_H
 
-#include <linux/types.h>
-#include <linux/i2c.h>
-#ifdef __KERNEL__
 #include <linux/kgdb.h>
-#endif /* __KERNEL__ */
+#include <uapi/linux/fb.h>
 
-/* Definitions of frame buffers						*/
-
-#define FB_MAX			32	/* sufficient for now */
-
-/* ioctls
-   0x46 is 'F'								*/
-#define FBIOGET_VSCREENINFO	0x4600
-#define FBIOPUT_VSCREENINFO	0x4601
-#define FBIOGET_FSCREENINFO	0x4602
-#define FBIOGETCMAP		0x4604
-#define FBIOPUTCMAP		0x4605
-#define FBIOPAN_DISPLAY		0x4606
-#ifdef __KERNEL__
 #define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor_user)
-#else
-#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
-#endif
-/* 0x4607-0x460B are defined below */
-/* #define FBIOGET_MONITORSPEC	0x460C */
-/* #define FBIOPUT_MONITORSPEC	0x460D */
-/* #define FBIOSWITCH_MONIBIT	0x460E */
-#define FBIOGET_CON2FBMAP	0x460F
-#define FBIOPUT_CON2FBMAP	0x4610
-#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
-#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
-#define FBIO_ALLOC              0x4613
-#define FBIO_FREE               0x4614
-#define FBIOGET_GLYPH           0x4615
-#define FBIOGET_HWCINFO         0x4616
-#define FBIOPUT_MODEINFO        0x4617
-#define FBIOGET_DISPINFO        0x4618
-#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
-
-#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
-#define FB_TYPE_PLANES			1	/* Non interleaved planes */
-#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
-#define FB_TYPE_TEXT			3	/* Text/attributes	*/
-#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
-#define FB_TYPE_FOURCC			5	/* Type identified by a V4L2 FOURCC */
-
-#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
-#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
-#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
-#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_GROUP	8	/* 8-15: SVGA tileblit compatible modes */
-#define FB_AUX_TEXT_SVGA_MASK	7	/* lower three bits says step */
-#define FB_AUX_TEXT_SVGA_STEP2	8	/* SVGA text mode:  text, attr */
-#define FB_AUX_TEXT_SVGA_STEP4	9	/* SVGA text mode:  text, attr,  2 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP8	10	/* SVGA text mode:  text, attr,  6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP16	11	/* SVGA text mode:  text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_SVGA_LAST	15	/* reserved up to 15 */
-
-#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
-#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
-#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
-
-#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
-#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
-#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
-#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
-#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
-#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
-#define FB_VISUAL_FOURCC		6	/* Visual identified by a V4L2 FOURCC */
-
-#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
-#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
-#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
-#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
-#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
-#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
-#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
-#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
-#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
-#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
-#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
-#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
-#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
-#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
-#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
-#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
-#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
-#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
-#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
-#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
-#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
-#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
-#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
-#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
-#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
-#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
-#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
-#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
-#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
-#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
-#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
-#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
-#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
-#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
-#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
-#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
-#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
-#define FB_ACCEL_I810           39      /* Intel 810/815                */
-#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
-#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
-#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
-#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
-#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
-#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
-#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
-#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
-#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
-#define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
-#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
-#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
-#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
-#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
-#define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
-#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
-#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
-#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
-#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
-#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
-#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
-#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
-#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
-#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
-#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
-
-#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
-#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
-#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
-#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
-#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
-#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
-#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
-#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
-#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
-#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
-#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
-#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
-#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
-#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
-#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
-
-#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
-
-#define FB_CAP_FOURCC		1	/* Device supports FOURCC-based formats */
-
-struct fb_fix_screeninfo {
-	char id[16];			/* identification string eg "TT Builtin" */
-	unsigned long smem_start;	/* Start of frame buffer mem */
-					/* (physical address) */
-	__u32 smem_len;			/* Length of frame buffer mem */
-	__u32 type;			/* see FB_TYPE_*		*/
-	__u32 type_aux;			/* Interleave for interleaved Planes */
-	__u32 visual;			/* see FB_VISUAL_*		*/ 
-	__u16 xpanstep;			/* zero if no hardware panning  */
-	__u16 ypanstep;			/* zero if no hardware panning  */
-	__u16 ywrapstep;		/* zero if no hardware ywrap    */
-	__u32 line_length;		/* length of a line in bytes    */
-	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
-					/* (physical address) */
-	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
-	__u32 accel;			/* Indicate to driver which	*/
-					/*  specific chip/card we have	*/
-	__u16 capabilities;		/* see FB_CAP_*			*/
-	__u16 reserved[2];		/* Reserved for future compatibility */
-};
-
-/* Interpretation of offset for color fields: All offsets are from the right,
- * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
- * can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified.
- *
- * For pseudocolor: offset and length should be the same for all color
- * components. Offset specifies the position of the least significant bit
- * of the pallette index in a pixel value. Length indicates the number
- * of available palette entries (i.e. # of entries = 1 << length).
- */
-struct fb_bitfield {
-	__u32 offset;			/* beginning of bitfield	*/
-	__u32 length;			/* length of bitfield		*/
-	__u32 msb_right;		/* != 0 : Most significant bit is */ 
-					/* right */ 
-};
-
-#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
-#define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
-
-#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
-#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
-#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
-#define FB_ACTIVATE_MASK       15
-					/* values			*/
-#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
-#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
-#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
-#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
-#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
-
-#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
-
-#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
-#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
-#define FB_SYNC_EXT		4	/* external sync		*/
-#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
-#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
-					/* vtotal = 144d/288n/576i => PAL  */
-					/* vtotal = 121d/242n/484i => NTSC */
-#define FB_SYNC_ON_GREEN	32	/* sync on green */
-
-#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
-#define FB_VMODE_INTERLACED	1	/* interlaced	*/
-#define FB_VMODE_DOUBLE		2	/* double scan */
-#define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
-#define FB_VMODE_MASK		255
-
-#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
-#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
-#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
-
-/*
- * Display rotation support
- */
-#define FB_ROTATE_UR      0
-#define FB_ROTATE_CW      1
-#define FB_ROTATE_UD      2
-#define FB_ROTATE_CCW     3
-
-#define PICOS2KHZ(a) (1000000000UL/(a))
-#define KHZ2PICOS(a) (1000000000UL/(a))
-
-struct fb_var_screeninfo {
-	__u32 xres;			/* visible resolution		*/
-	__u32 yres;
-	__u32 xres_virtual;		/* virtual resolution		*/
-	__u32 yres_virtual;
-	__u32 xoffset;			/* offset from virtual to visible */
-	__u32 yoffset;			/* resolution			*/
-
-	__u32 bits_per_pixel;		/* guess what			*/
-	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
-					/* >1 = FOURCC			*/
-	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
-	struct fb_bitfield green;	/* else only length is significant */
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;	/* transparency			*/	
-
-	__u32 nonstd;			/* != 0 Non standard pixel format */
-
-	__u32 activate;			/* see FB_ACTIVATE_*		*/
-
-	__u32 height;			/* height of picture in mm    */
-	__u32 width;			/* width of picture in mm     */
-
-	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
-
-	/* Timing: All values in pixclocks, except pixclock (of course) */
-	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
-	__u32 left_margin;		/* time from sync to picture	*/
-	__u32 right_margin;		/* time from picture to sync	*/
-	__u32 upper_margin;		/* time from sync to picture	*/
-	__u32 lower_margin;
-	__u32 hsync_len;		/* length of horizontal sync	*/
-	__u32 vsync_len;		/* length of vertical sync	*/
-	__u32 sync;			/* see FB_SYNC_*		*/
-	__u32 vmode;			/* see FB_VMODE_*		*/
-	__u32 rotate;			/* angle we rotate counter clockwise */
-	__u32 colorspace;		/* colorspace for FOURCC-based modes */
-	__u32 reserved[4];		/* Reserved for future compatibility */
-};
-
-struct fb_cmap {
-	__u32 start;			/* First entry	*/
-	__u32 len;			/* Number of entries */
-	__u16 *red;			/* Red values	*/
-	__u16 *green;
-	__u16 *blue;
-	__u16 *transp;			/* transparency, can be NULL */
-};
-
-struct fb_con2fbmap {
-	__u32 console;
-	__u32 framebuffer;
-};
-
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING        0
-#define VESA_VSYNC_SUSPEND      1
-#define VESA_HSYNC_SUSPEND      2
-#define VESA_POWERDOWN          3
-
-
-enum {
-	/* screen: unblanked, hsync: on,  vsync: on */
-	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
-
-	/* screen: blanked,   hsync: on,  vsync: on */
-	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
-
-	/* screen: blanked,   hsync: on,  vsync: off */
-	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
-
-	/* screen: blanked,   hsync: off, vsync: on */
-	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
-
-	/* screen: blanked,   hsync: off, vsync: off */
-	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
-};
-
-#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
-#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
-#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
-#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
-#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
-#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
-#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
-#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
-#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
-
-struct fb_vblank {
-	__u32 flags;			/* FB_VBLANK flags */
-	__u32 count;			/* counter of retraces since boot */
-	__u32 vcount;			/* current scanline position */
-	__u32 hcount;			/* current scandot position */
-	__u32 reserved[4];		/* reserved for future compatibility */
-};
-
-/* Internal HW accel */
-#define ROP_COPY 0
-#define ROP_XOR  1
-
-struct fb_copyarea {
-	__u32 dx;
-	__u32 dy;
-	__u32 width;
-	__u32 height;
-	__u32 sx;
-	__u32 sy;
-};
-
-struct fb_fillrect {
-	__u32 dx;	/* screen-relative */
-	__u32 dy;
-	__u32 width;
-	__u32 height;
-	__u32 color;
-	__u32 rop;
-};
-
-struct fb_image {
-	__u32 dx;		/* Where to place image */
-	__u32 dy;
-	__u32 width;		/* Size of image */
-	__u32 height;
-	__u32 fg_color;		/* Only used when a mono bitmap */
-	__u32 bg_color;
-	__u8  depth;		/* Depth of the image */
-	const char *data;	/* Pointer to image data */
-	struct fb_cmap cmap;	/* color map info */
-};
-
-/*
- * hardware cursor control
- */
-
-#define FB_CUR_SETIMAGE 0x01
-#define FB_CUR_SETPOS   0x02
-#define FB_CUR_SETHOT   0x04
-#define FB_CUR_SETCMAP  0x08
-#define FB_CUR_SETSHAPE 0x10
-#define FB_CUR_SETSIZE	0x20
-#define FB_CUR_SETALL   0xFF
-
-struct fbcurpos {
-	__u16 x, y;
-};
-
-struct fb_cursor {
-	__u16 set;		/* what to set */
-	__u16 enable;		/* cursor on/off */
-	__u16 rop;		/* bitop operation */
-	const char *mask;	/* cursor mask bits */
-	struct fbcurpos hot;	/* cursor hot spot */
-	struct fb_image	image;	/* Cursor image */
-};
-
-#ifdef CONFIG_FB_BACKLIGHT
-/* Settings for the generic backlight code */
-#define FB_BACKLIGHT_LEVELS	128
-#define FB_BACKLIGHT_MAX	0xFF
-#endif
-
-#ifdef __KERNEL__
 
 #include <linux/fs.h>
 #include <linux/init.h>
@@ -1181,6 +782,4 @@ extern int fb_find_mode(struct fb_var_screeninfo *var,
 			const struct fb_videomode *default_mode,
 			unsigned int default_bpp);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_FB_H */
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
index f550f894ba15edabd684bd7aa5bdcac3f4df257e..76ce329e656d1eaca5a6d6792f97d3c067fa37c6 100644
--- a/include/linux/fcntl.h
+++ b/include/linux/fcntl.h
@@ -1,54 +1,8 @@
 #ifndef _LINUX_FCNTL_H
 #define _LINUX_FCNTL_H
 
-#include <asm/fcntl.h>
+#include <uapi/linux/fcntl.h>
 
-#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
-#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
-
-/*
- * Cancel a blocking posix lock; internal use only until we expose an
- * asynchronous lock api to userspace:
- */
-#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
-
-/* Create a file descriptor with FD_CLOEXEC set. */
-#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
-
-/*
- * Request nofications on a directory.
- * See below for events that may be notified.
- */
-#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
-
-/*
- * Set and get of pipe page size array
- */
-#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
-#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
-
-/*
- * Types of directory notifications that may be requested.
- */
-#define DN_ACCESS	0x00000001	/* File accessed */
-#define DN_MODIFY	0x00000002	/* File modified */
-#define DN_CREATE	0x00000004	/* File created */
-#define DN_DELETE	0x00000008	/* File removed */
-#define DN_RENAME	0x00000010	/* File renamed */
-#define DN_ATTRIB	0x00000020	/* File changed attibutes */
-#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
-
-#define AT_FDCWD		-100    /* Special value used to indicate
-                                           openat should use the current
-                                           working directory. */
-#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
-#define AT_REMOVEDIR		0x200   /* Remove directory instead of
-                                           unlinking file.  */
-#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
-#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
-#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
-
-#ifdef __KERNEL__
 
 #ifndef force_o_largefile
 #define force_o_largefile() (BITS_PER_LONG != 32)
@@ -74,6 +28,4 @@
 #define IS_SETLK(cmd)	(IS_SETLK32(cmd)  || IS_SETLK64(cmd))
 #define IS_SETLKW(cmd)	(IS_SETLKW32(cmd) || IS_SETLKW64(cmd))
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/fd.h b/include/linux/fd.h
index 72202b1b9a6a0e4fdd1184ee644e4d30f342b94a..69275bccc3e486d53ca3a36a922dba8ea8908a66 100644
--- a/include/linux/fd.h
+++ b/include/linux/fd.h
@@ -1,384 +1,8 @@
 #ifndef _LINUX_FD_H
 #define _LINUX_FD_H
 
-#include <linux/ioctl.h>
-#include <linux/compiler.h>
+#include <uapi/linux/fd.h>
 
-/* New file layout: Now the ioctl definitions immediately follow the
- * definitions of the structures that they use */
-
-/*
- * Geometry
- */
-struct floppy_struct {
-	unsigned int	size,		/* nr of sectors total */
-			sect,		/* sectors per track */
-			head,		/* nr of heads */
-			track,		/* nr of tracks */
-			stretch;	/* bit 0 !=0 means double track steps */
-					/* bit 1 != 0 means swap sides */
-					/* bits 2..9 give the first sector */
-					/*  number (the LSB is flipped) */
-#define FD_STRETCH 1
-#define FD_SWAPSIDES 2
-#define FD_ZEROBASED 4
-#define FD_SECTBASEMASK 0x3FC
-#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
-#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
-
-	unsigned char	gap,		/* gap1 size */
-
-			rate,		/* data rate. |= 0x40 for perpendicular */
-#define FD_2M 0x4
-#define FD_SIZECODEMASK 0x38
-#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
-#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
-			     512 : 128 << FD_SIZECODE(floppy) )
-#define FD_PERP 0x40
-
-			spec1,		/* stepping rate, head unload time */
-			fmt_gap;	/* gap2 size */
-	const char	* name; /* used only for predefined formats */
-};
-
-
-/* commands needing write access have 0x40 set */
-/* commands needing super user access have 0x80 set */
-
-#define FDCLRPRM _IO(2, 0x41)
-/* clear user-defined parameters */
-
-#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
-#define FDSETMEDIAPRM FDSETPRM
-/* set user-defined parameters for current media */
-
-#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
-#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
-#define FDDEFMEDIAPRM FDDEFPRM
-#define FDGETMEDIAPRM FDGETPRM
-/* set/get disk parameters */
-
-
-#define	FDMSGON  _IO(2,0x45)
-#define	FDMSGOFF _IO(2,0x46)
-/* issue/don't issue kernel messages on media type change */
-
-
-/* 
- * Formatting (obsolete)
- */
-#define FD_FILL_BYTE 0xF6 /* format fill byte. */
-
-struct format_descr {
-	unsigned int device,head,track;
-};
-
-#define FDFMTBEG _IO(2,0x47)
-/* begin formatting a disk */
-#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
-/* format the specified track */
-#define FDFMTEND _IO(2,0x49)
-/* end formatting a disk */
-
-
-/*
- * Error thresholds
- */
-struct floppy_max_errors {
-	unsigned int
-	  abort,      /* number of errors to be reached before aborting */
-	  read_track, /* maximal number of errors permitted to read an
-		       * entire track at once */
-	  reset,      /* maximal number of errors before a reset is tried */
-	  recal,      /* maximal number of errors before a recalibrate is
-		       * tried */
-
-	  /*
-	   * Threshold for reporting FDC errors to the console.
-	   * Setting this to zero may flood your screen when using
-	   * ultra cheap floppies ;-)
-	   */
-	  reporting;
-
-};
-
-#define FDSETEMSGTRESH	_IO(2,0x4a)
-/* set fdc error reporting threshold */
-
-#define FDFLUSH  _IO(2,0x4b)
-/* flush buffers for media; either for verifying media, or for
- * handling a media change without closing the file descriptor */
-
-#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
-#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
-/* set/get abortion and read_track threshold. See also floppy_drive_params
- * structure */
-
-
-typedef char floppy_drive_name[16];
-#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
-/* get drive type: 5 1/4 or 3 1/2 */
-
-
-/*
- * Drive parameters (user modifiable)
- */
-struct floppy_drive_params {
-	signed char cmos;		/* CMOS type */
-	
-	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
-	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
-	 */
-	unsigned long max_dtr;		/* Step rate, usec */
-	unsigned long hlt;     		/* Head load/settle time, msec */
-	unsigned long hut;     		/* Head unload time (remnant of 
-					 * 8" drives) */
-	unsigned long srt;     		/* Step rate, usec */
-
-	unsigned long spinup;		/* time needed for spinup (expressed
-					 * in jiffies) */
-	unsigned long spindown;		/* timeout needed for spindown */
-	unsigned char spindown_offset;	/* decides in which position the disk
-					 * will stop */
-	unsigned char select_delay;	/* delay to wait after select */
-	unsigned char rps;		/* rotations per second */
-	unsigned char tracks;		/* maximum number of tracks */
-	unsigned long timeout;		/* timeout for interrupt requests */
-	
-	unsigned char interleave_sect;	/* if there are more sectors, use 
-					 * interleave */
-	
-	struct floppy_max_errors max_errors;
-	
-	char flags;			/* various flags, including ftd_msg */
-/*
- * Announce successful media type detection and media information loss after
- * disk changes.
- * Also used to enable/disable printing of overrun warnings.
- */
-
-#define FTD_MSG 0x10
-#define FD_BROKEN_DCL 0x20
-#define FD_DEBUG 0x02
-#define FD_SILENT_DCL_CLEAR 0x4
-#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
-				considerations */
-
-	char read_track;		/* use readtrack during probing? */
-
-/*
- * Auto-detection. Each drive type has eight formats which are
- * used in succession to try to read the disk. If the FDC cannot lock onto
- * the disk, the next format is tried. This uses the variable 'probing'.
- */
-	short autodetect[8];		/* autodetected formats */
-	
-	int checkfreq; /* how often should the drive be checked for disk 
-			* changes */
-	int native_format; /* native format of this drive */
-};
-
-enum {
-	FD_NEED_TWADDLE_BIT,	/* more magic */
-	FD_VERIFY_BIT,		/* inquire for write protection */
-	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
-				 * to clear media change status */
-	FD_UNUSED_BIT,
-	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
-	FD_DISK_WRITABLE_BIT	/* disk is writable */
-};
-
-#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
-#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
-/* set/get drive parameters */
-
-
-/*
- * Current drive state (not directly modifiable by user, readonly)
- */
-struct floppy_drive_struct {
-	unsigned long flags;
-/* values for these flags */
-#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
-#define FD_VERIFY (1 << FD_VERIFY_BIT)
-#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
-#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
-#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
-
-	unsigned long spinup_date;
-	unsigned long select_date;
-	unsigned long first_read_date;
-	short probed_format;
-	short track; /* current track */
-	short maxblock; /* id of highest block read */
-	short maxtrack; /* id of highest half track read */
-	int generation; /* how many diskchanges? */
-
-/*
- * (User-provided) media information is _not_ discarded after a media change
- * if the corresponding keep_data flag is non-zero. Positive values are
- * decremented after each probe.
- */
-	int keep_data;
-	
-	/* Prevent "aliased" accesses. */
-	int fd_ref;
-	int fd_device;
-	unsigned long last_checked; /* when was the drive last checked for a disk 
-			   * change? */
-	
-	char *dmabuf;
-	int bufblocks;
-};
-
-#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
-#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
-/* get drive state: GET returns the cached state, POLL polls for new state */
-
-
-/*
- * reset FDC
- */
-enum reset_mode {
-	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
-	FD_RESET_IF_RAWCMD,	/* obsolete */
-	FD_RESET_ALWAYS		/* reset always */
-};
-#define FDRESET _IO(2, 0x54)
-
-
-/*
- * FDC state
- */
-struct floppy_fdc_state {	
-	int spec1;		/* spec1 value last used */
-	int spec2;		/* spec2 value last used */
-	int dtr;
-	unsigned char version;	/* FDC version code */
-	unsigned char dor;
-	unsigned long address;	/* io address */
-	unsigned int rawcmd:2;
-	unsigned int reset:1;
-	unsigned int need_configure:1;
-	unsigned int perp_mode:2;
-	unsigned int has_fifo:1;
-	unsigned int driver_version;	/* version code for floppy driver */
-#define FD_DRIVER_VERSION 0x100
-/* user programs using the floppy API should use floppy_fdc_state to
- * get the version number of the floppy driver that they are running
- * on. If this version number is bigger than the one compiled into the
- * user program (the FD_DRIVER_VERSION define), it should be prepared
- * to bigger structures
- */
-
-	unsigned char track[4];
-	/* Position of the heads of the 4 units attached to this FDC,
-	 * as stored on the FDC. In the future, the position as stored
-	 * on the FDC might not agree with the actual physical
-	 * position of these drive heads. By allowing such
-	 * disagreement, it will be possible to reset the FDC without
-	 * incurring the expensive cost of repositioning all heads.
-	 * Right now, these positions are hard wired to 0. */
-
-};
-
-#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
-
-
-/*
- * Asynchronous Write error tracking
- */
-struct floppy_write_errors {
-	/* Write error logging.
-	 *
-	 * These fields can be cleared with the FDWERRORCLR ioctl.
-	 * Only writes that were attempted but failed due to a physical media
-	 * error are logged.  write(2) calls that fail and return an error code
-	 * to the user process are not counted.
-	 */
-
-	unsigned int write_errors;  /* number of physical write errors 
-				     * encountered */
-	
-	/* position of first and last write errors */
-	unsigned long first_error_sector;
-	int           first_error_generation;
-	unsigned long last_error_sector;
-	int           last_error_generation;
-	
-	unsigned int badness; /* highest retry count for a read or write 
-			       * operation */
-};
-
-#define FDWERRORCLR  _IO(2, 0x56)
-/* clear write error and badness information */
-#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
-/* get write error and badness information */
-
-
-/*
- * Raw commands
- */
-/* new interface flag: now we can do them in batches */
-#define FDHAVEBATCHEDRAWCMD
-
-struct floppy_raw_cmd {
-	unsigned int flags;
-#define FD_RAW_READ 1
-#define FD_RAW_WRITE 2
-#define FD_RAW_NO_MOTOR 4
-#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
-#define FD_RAW_INTR 8    /* wait for an interrupt */
-#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
-#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
-				    * completion */
-#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
-#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
-
-/* more "in" flags */
-#define FD_RAW_MORE 0x100  /* more records follow */
-#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
-#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
-#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
-				  * detection too */
-
-/* more "out" flags */
-#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
-#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
-
-	void __user *data;
-	char *kernel_data; /* location of data buffer in the kernel */
-	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
-				      * within the kernel */
-	long length; /* in: length of dma transfer. out: remaining bytes */
-	long phys_length; /* physical length, if different from dma length */
-	int buffer_length; /* length of allocated buffer */
-
-	unsigned char rate;
-	unsigned char cmd_count;
-	unsigned char cmd[16];
-	unsigned char reply_count;
-	unsigned char reply[16];
-	int track;
-	int resultcode;
-
-	int reserved1;
-	int reserved2;
-};
-
-#define FDRAWCMD _IO(2, 0x58)
-/* send a raw command to the fdc. Structure size not included, because of
- * batches */
-
-#define FDTWADDLE _IO(2, 0x59)
-/* flicker motor-on bit before reading a sector. Experimental */
-
-
-#define FDEJECT _IO(2, 0x5a)
-/* eject the disk */
-
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 
@@ -398,5 +22,3 @@ struct compat_floppy_struct {
 #define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct)
 #endif
 #endif
-
-#endif
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 2ded090e10f4e511461cacdbfcdc031dc1dd0b3e..24d251f3bab0711c26231d67352df1ca140e608a 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -1,141 +1,12 @@
 /*
  * Linux Socket Filter Data Structures
  */
-
 #ifndef __LINUX_FILTER_H__
 #define __LINUX_FILTER_H__
 
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 #include <linux/atomic.h>
 #include <linux/compat.h>
-#endif
-
-/*
- * Current version of the filter code architecture.
- */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- *	Try and keep these values and structures similar to BSD, especially
- *	the BPF code definitions which need to match so you can share filters
- */
- 
-struct sock_filter {	/* Filter block */
-	__u16	code;   /* Actual filter code */
-	__u8	jt;	/* Jump true */
-	__u8	jf;	/* Jump false */
-	__u32	k;      /* Generic multiuse field */
-};
-
-struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
-	unsigned short		len;	/* Number of filter blocks */
-	struct sock_filter __user *filter;
-};
-
-/*
- * Instruction classes
- */
-
-#define BPF_CLASS(code) ((code) & 0x07)
-#define         BPF_LD          0x00
-#define         BPF_LDX         0x01
-#define         BPF_ST          0x02
-#define         BPF_STX         0x03
-#define         BPF_ALU         0x04
-#define         BPF_JMP         0x05
-#define         BPF_RET         0x06
-#define         BPF_MISC        0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code)  ((code) & 0x18)
-#define         BPF_W           0x00
-#define         BPF_H           0x08
-#define         BPF_B           0x10
-#define BPF_MODE(code)  ((code) & 0xe0)
-#define         BPF_IMM         0x00
-#define         BPF_ABS         0x20
-#define         BPF_IND         0x40
-#define         BPF_MEM         0x60
-#define         BPF_LEN         0x80
-#define         BPF_MSH         0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code)    ((code) & 0xf0)
-#define         BPF_ADD         0x00
-#define         BPF_SUB         0x10
-#define         BPF_MUL         0x20
-#define         BPF_DIV         0x30
-#define         BPF_OR          0x40
-#define         BPF_AND         0x50
-#define         BPF_LSH         0x60
-#define         BPF_RSH         0x70
-#define         BPF_NEG         0x80
-#define		BPF_MOD		0x90
-#define		BPF_XOR		0xa0
-
-#define         BPF_JA          0x00
-#define         BPF_JEQ         0x10
-#define         BPF_JGT         0x20
-#define         BPF_JGE         0x30
-#define         BPF_JSET        0x40
-#define BPF_SRC(code)   ((code) & 0x08)
-#define         BPF_K           0x00
-#define         BPF_X           0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code)  ((code) & 0x18)
-#define         BPF_A           0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define         BPF_TAX         0x00
-#define         BPF_TXA         0x80
-
-#ifndef BPF_MAXINSNS
-#define BPF_MAXINSNS 4096
-#endif
-
-/*
- * Macros for filter block array initializers.
- */
-#ifndef BPF_STMT
-#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
-#endif
-#ifndef BPF_JUMP
-#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
-#endif
-
-/*
- * Number of scratch memory words for: BPF_ST and BPF_STX
- */
-#define BPF_MEMWORDS 16
-
-/* RATIONALE. Negative offsets are invalid in BPF.
-   We use them to reference ancillary data.
-   Unlike introduction new instructions, it does not break
-   existing compilers/optimizers.
- */
-#define SKF_AD_OFF    (-0x1000)
-#define SKF_AD_PROTOCOL 0
-#define SKF_AD_PKTTYPE 	4
-#define SKF_AD_IFINDEX 	8
-#define SKF_AD_NLATTR	12
-#define SKF_AD_NLATTR_NEST	16
-#define SKF_AD_MARK 	20
-#define SKF_AD_QUEUE	24
-#define SKF_AD_HATYPE	28
-#define SKF_AD_RXHASH	32
-#define SKF_AD_CPU	36
-#define SKF_AD_ALU_XOR_X	40
-#define SKF_AD_MAX	44
-#define SKF_NET_OFF   (-0x100000)
-#define SKF_LL_OFF    (-0x200000)
-
-#ifdef __KERNEL__
+#include <uapi/linux/filter.h>
 
 #ifdef CONFIG_COMPAT
 /*
@@ -254,6 +125,4 @@ enum {
 	BPF_S_ANC_SECCOMP_LD_W,
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/flat.h b/include/linux/flat.h
index ec56852e2659616c4df9c5956f1b144bd8c1e9e4..2c1eb15c4ba4da60337075b2c4a6a579f361254a 100644
--- a/include/linux/flat.h
+++ b/include/linux/flat.h
@@ -6,58 +6,12 @@
  * This file provides the definitions and structures needed to
  * support uClinux flat-format executables.
  */
-
 #ifndef _LINUX_FLAT_H
 #define _LINUX_FLAT_H
 
-#ifdef __KERNEL__
 #include <asm/flat.h>
-#endif
-
-#define	FLAT_VERSION			0x00000004L
-
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-#define	MAX_SHARED_LIBS			(4)
-#else
-#define	MAX_SHARED_LIBS			(1)
-#endif
-
-/*
- * To make everything easier to port and manage cross platform
- * development,  all fields are in network byte order.
- */
+#include <uapi/linux/flat.h>
 
-struct flat_hdr {
-	char magic[4];
-	unsigned long rev;          /* version (as above) */
-	unsigned long entry;        /* Offset of first executable instruction
-	                               with text segment from beginning of file */
-	unsigned long data_start;   /* Offset of data segment from beginning of
-	                               file */
-	unsigned long data_end;     /* Offset of end of data segment
-	                               from beginning of file */
-	unsigned long bss_end;      /* Offset of end of bss segment from beginning
-	                               of file */
-
-	/* (It is assumed that data_end through bss_end forms the bss segment.) */
-
-	unsigned long stack_size;   /* Size of stack, in bytes */
-	unsigned long reloc_start;  /* Offset of relocation records from
-	                               beginning of file */
-	unsigned long reloc_count;  /* Number of relocation records */
-	unsigned long flags;       
-	unsigned long build_date;   /* When the program/library was built */
-	unsigned long filler[5];    /* Reservered, set to zero */
-};
-
-#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
-#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
-#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
-#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
-#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
-
-
-#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
 /*
  * While it would be nice to keep this header clean,  users of older
  * tools still need this support in the kernel.  So this section is
@@ -95,6 +49,4 @@ typedef union {
 	} reloc;
 } flat_v2_reloc_t;
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_FLAT_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 65fbf571023f6f8f2ffb48f686e7fc33fab023c7..001c7cff2d4826e4e54b6395596483030c86fc11 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1,121 +1,68 @@
 #ifndef _LINUX_FS_H
 #define _LINUX_FS_H
 
-/*
- * This file has definitions for some important file table
- * structures etc.
- */
 
-#include <linux/limits.h>
-#include <linux/ioctl.h>
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/kdev_t.h>
+#include <linux/dcache.h>
+#include <linux/path.h>
+#include <linux/stat.h>
+#include <linux/cache.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+#include <linux/rbtree.h>
+#include <linux/init.h>
+#include <linux/pid.h>
+#include <linux/bug.h>
+#include <linux/mutex.h>
+#include <linux/capability.h>
+#include <linux/semaphore.h>
+#include <linux/fiemap.h>
+#include <linux/rculist_bl.h>
+#include <linux/atomic.h>
+#include <linux/shrinker.h>
+#include <linux/migrate_mode.h>
+#include <linux/uidgid.h>
+#include <linux/lockdep.h>
+#include <linux/percpu-rwsem.h>
 #include <linux/blk_types.h>
-#include <linux/types.h>
-
-/*
- * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
- * the file limit at runtime and only root can increase the per-process
- * nr_file rlimit, so it's safe to set up a ridiculously high absolute
- * upper limit on files-per-process.
- *
- * Some programs (notably those using select()) may have to be 
- * recompiled to take full advantage of the new limits..  
- */
-
-/* Fixed constants first: */
-#undef NR_OPEN
-#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
-#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
-
-#define BLOCK_SIZE_BITS 10
-#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
-
-#define SEEK_SET	0	/* seek relative to beginning of file */
-#define SEEK_CUR	1	/* seek relative to current file position */
-#define SEEK_END	2	/* seek relative to end of file */
-#define SEEK_DATA	3	/* seek to the next data */
-#define SEEK_HOLE	4	/* seek to the next hole */
-#define SEEK_MAX	SEEK_HOLE
-
-struct fstrim_range {
-	__u64 start;
-	__u64 len;
-	__u64 minlen;
-};
-
-/* And dynamically-tunable limits and defaults: */
-struct files_stat_struct {
-	unsigned long nr_files;		/* read only */
-	unsigned long nr_free_files;	/* read only */
-	unsigned long max_files;		/* tunable */
-};
-
-struct inodes_stat_t {
-	int nr_inodes;
-	int nr_unused;
-	int dummy[5];		/* padding for sysctl ABI compatibility */
-};
-
-
-#define NR_FILE  8192	/* this can well be larger on a larger system */
-
-#define MAY_EXEC		0x00000001
-#define MAY_WRITE		0x00000002
-#define MAY_READ		0x00000004
-#define MAY_APPEND		0x00000008
-#define MAY_ACCESS		0x00000010
-#define MAY_OPEN		0x00000020
-#define MAY_CHDIR		0x00000040
-/* called from RCU mode, don't block */
-#define MAY_NOT_BLOCK		0x00000080
-
-/*
- * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
- * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
- */
-
-/* file is open for reading */
-#define FMODE_READ		((__force fmode_t)0x1)
-/* file is open for writing */
-#define FMODE_WRITE		((__force fmode_t)0x2)
-/* file is seekable */
-#define FMODE_LSEEK		((__force fmode_t)0x4)
-/* file can be accessed using pread */
-#define FMODE_PREAD		((__force fmode_t)0x8)
-/* file can be accessed using pwrite */
-#define FMODE_PWRITE		((__force fmode_t)0x10)
-/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC		((__force fmode_t)0x20)
-/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY		((__force fmode_t)0x40)
-/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL		((__force fmode_t)0x80)
-/* File is opened using open(.., 3, ..) and is writeable only for ioctls
-   (specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
-/* 32bit hashes as llseek() offset (for directories) */
-#define FMODE_32BITHASH         ((__force fmode_t)0x200)
-/* 64bit hashes as llseek() offset (for directories) */
-#define FMODE_64BITHASH         ((__force fmode_t)0x400)
 
-/*
- * Don't update ctime and mtime.
- *
- * Currently a special hack for the XFS open_by_handle ioctl, but we'll
- * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
- */
-#define FMODE_NOCMTIME		((__force fmode_t)0x800)
+#include <asm/byteorder.h>
+#include <uapi/linux/fs.h>
 
-/* Expect random access pattern */
-#define FMODE_RANDOM		((__force fmode_t)0x1000)
+struct export_operations;
+struct hd_geometry;
+struct iovec;
+struct nameidata;
+struct kiocb;
+struct kobject;
+struct pipe_inode_info;
+struct poll_table_struct;
+struct kstatfs;
+struct vm_area_struct;
+struct vfsmount;
+struct cred;
+struct swap_info_struct;
 
-/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
-#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)
+extern void __init inode_init(void);
+extern void __init inode_init_early(void);
+extern void __init files_init(unsigned long);
 
-/* File is opened with O_PATH; almost nothing can be done with it */
-#define FMODE_PATH		((__force fmode_t)0x4000)
+extern struct files_stat_struct files_stat;
+extern unsigned long get_max_files(void);
+extern int sysctl_nr_open;
+extern struct inodes_stat_t inodes_stat;
+extern int leases_enable, lease_break_time;
+extern int sysctl_protected_symlinks;
+extern int sysctl_protected_hardlinks;
 
-/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY		((__force fmode_t)0x1000000)
+struct buffer_head;
+typedef int (get_block_t)(struct inode *inode, sector_t iblock,
+			struct buffer_head *bh_result, int create);
+typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
+			ssize_t bytes, void *private, int ret,
+			bool is_async);
 
 /*
  * The below are the various read and write types that we support. Some of
@@ -175,284 +122,6 @@ struct inodes_stat_t {
 #define WRITE_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
 #define WRITE_FLUSH_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
 
-
-/*
- * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
- * that indicates that they should check the contents of the iovec are
- * valid, but not check the memory that the iovec elements
- * points too.
- */
-#define CHECK_IOVEC_ONLY -1
-
-#define SEL_IN		1
-#define SEL_OUT		2
-#define SEL_EX		4
-
-/* public flags for file_system_type */
-#define FS_REQUIRES_DEV 1 
-#define FS_BINARY_MOUNTDATA 2
-#define FS_HAS_SUBTYPE 4
-#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
-#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move()
-					 * during rename() internally.
-					 */
-
-/*
- * These are the fs-independent mount-flags: up to 32 flags are supported
- */
-#define MS_RDONLY	 1	/* Mount read-only */
-#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
-#define MS_NODEV	 4	/* Disallow access to device special files */
-#define MS_NOEXEC	 8	/* Disallow program execution */
-#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
-#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
-#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
-#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
-#define MS_NOATIME	1024	/* Do not update access times. */
-#define MS_NODIRATIME	2048	/* Do not update directory access times */
-#define MS_BIND		4096
-#define MS_MOVE		8192
-#define MS_REC		16384
-#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
-				   MS_VERBOSE is deprecated. */
-#define MS_SILENT	32768
-#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
-#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
-#define MS_PRIVATE	(1<<18)	/* change to private */
-#define MS_SLAVE	(1<<19)	/* change to slave */
-#define MS_SHARED	(1<<20)	/* change to shared */
-#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
-#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
-#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
-#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
-#define MS_NOSEC	(1<<28)
-#define MS_BORN		(1<<29)
-#define MS_ACTIVE	(1<<30)
-#define MS_NOUSER	(1<<31)
-
-/*
- * Superblock flags that can be altered by MS_REMOUNT
- */
-#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
-
-/*
- * Old magic mount flag and mask
- */
-#define MS_MGC_VAL 0xC0ED0000
-#define MS_MGC_MSK 0xffff0000
-
-/* Inode flags - they have nothing to superblock flags now */
-
-#define S_SYNC		1	/* Writes are synced at once */
-#define S_NOATIME	2	/* Do not update access times */
-#define S_APPEND	4	/* Append-only file */
-#define S_IMMUTABLE	8	/* Immutable file */
-#define S_DEAD		16	/* removed, but still open directory */
-#define S_NOQUOTA	32	/* Inode is not counted to quota */
-#define S_DIRSYNC	64	/* Directory modifications are synchronous */
-#define S_NOCMTIME	128	/* Do not update file c/mtime */
-#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
-#define S_PRIVATE	512	/* Inode is fs-internal */
-#define S_IMA		1024	/* Inode has an associated IMA struct */
-#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
-#define S_NOSEC		4096	/* no suid or xattr security attributes */
-
-/*
- * Note that nosuid etc flags are inode-specific: setting some file-system
- * flags just means all the inodes inherit those flags by default. It might be
- * possible to override it selectively if you really wanted to with some
- * ioctl() that is not currently implemented.
- *
- * Exception: MS_RDONLY is always applied to the entire file system.
- *
- * Unfortunately, it is possible to change a filesystems flags with it mounted
- * with files in use.  This means that all of the inodes will not have their
- * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
- * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
- */
-#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
-
-#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
-#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
-					((inode)->i_flags & S_SYNC))
-#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
-					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
-#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
-#define IS_NOATIME(inode)   __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
-#define IS_I_VERSION(inode)   __IS_FLG(inode, MS_I_VERSION)
-
-#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
-#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
-#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
-#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
-
-#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
-#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
-#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
-#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
-#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
-#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
-#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
-
-/* the read-only stuff doesn't really belong here, but any other place is
-   probably as bad and I don't want to create yet another include file. */
-
-#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
-#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
-#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
-#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
-#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
-#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
-#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
-#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
-#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
-#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
-#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
-#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
-#if 0
-#define BLKPG      _IO(0x12,105)/* See blkpg.h */
-
-/* Some people are morons.  Do not use sizeof! */
-
-#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
-#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
-/* This was here just to show that the number is taken -
-   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
-#endif
-/* A jump here: 108-111 have been used for various private purposes. */
-#define BLKBSZGET  _IOR(0x12,112,size_t)
-#define BLKBSZSET  _IOW(0x12,113,size_t)
-#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
-#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
-#define BLKTRACESTART _IO(0x12,116)
-#define BLKTRACESTOP _IO(0x12,117)
-#define BLKTRACETEARDOWN _IO(0x12,118)
-#define BLKDISCARD _IO(0x12,119)
-#define BLKIOMIN _IO(0x12,120)
-#define BLKIOOPT _IO(0x12,121)
-#define BLKALIGNOFF _IO(0x12,122)
-#define BLKPBSZGET _IO(0x12,123)
-#define BLKDISCARDZEROES _IO(0x12,124)
-#define BLKSECDISCARD _IO(0x12,125)
-#define BLKROTATIONAL _IO(0x12,126)
-#define BLKZEROOUT _IO(0x12,127)
-
-#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
-#define FIBMAP	   _IO(0x00,1)	/* bmap access */
-#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
-#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
-#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
-#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
-
-#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
-#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
-#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
-#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
-#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
-#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
-#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
-#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
-#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
-
-/*
- * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
- */
-#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
-#define	FS_UNRM_FL			0x00000002 /* Undelete */
-#define	FS_COMPR_FL			0x00000004 /* Compress file */
-#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
-#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
-#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
-#define FS_NODUMP_FL			0x00000040 /* do not dump file */
-#define FS_NOATIME_FL			0x00000080 /* do not update atime */
-/* Reserved for compression usage... */
-#define FS_DIRTY_FL			0x00000100
-#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
-#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
-#define FS_ECOMPR_FL			0x00000800 /* Compression error */
-/* End compression flags --- maybe not all used */
-#define FS_BTREE_FL			0x00001000 /* btree format dir */
-#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
-#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
-#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
-#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
-#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
-#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
-#define FS_EXTENT_FL			0x00080000 /* Extents */
-#define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
-#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
-#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
-
-#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
-#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
-
-
-#define SYNC_FILE_RANGE_WAIT_BEFORE	1
-#define SYNC_FILE_RANGE_WRITE		2
-#define SYNC_FILE_RANGE_WAIT_AFTER	4
-
-#ifdef __KERNEL__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/kdev_t.h>
-#include <linux/dcache.h>
-#include <linux/path.h>
-#include <linux/stat.h>
-#include <linux/cache.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-#include <linux/rbtree.h>
-#include <linux/init.h>
-#include <linux/pid.h>
-#include <linux/bug.h>
-#include <linux/mutex.h>
-#include <linux/capability.h>
-#include <linux/semaphore.h>
-#include <linux/fiemap.h>
-#include <linux/rculist_bl.h>
-#include <linux/atomic.h>
-#include <linux/shrinker.h>
-#include <linux/migrate_mode.h>
-#include <linux/uidgid.h>
-#include <linux/lockdep.h>
-#include <linux/percpu-rwsem.h>
-
-#include <asm/byteorder.h>
-
-struct export_operations;
-struct hd_geometry;
-struct iovec;
-struct nameidata;
-struct kiocb;
-struct kobject;
-struct pipe_inode_info;
-struct poll_table_struct;
-struct kstatfs;
-struct vm_area_struct;
-struct vfsmount;
-struct cred;
-struct swap_info_struct;
-
-extern void __init inode_init(void);
-extern void __init inode_init_early(void);
-extern void __init files_init(unsigned long);
-
-extern struct files_stat_struct files_stat;
-extern unsigned long get_max_files(void);
-extern int sysctl_nr_open;
-extern struct inodes_stat_t inodes_stat;
-extern int leases_enable, lease_break_time;
-extern int sysctl_protected_symlinks;
-extern int sysctl_protected_hardlinks;
-
-struct buffer_head;
-typedef int (get_block_t)(struct inode *inode, sector_t iblock,
-			struct buffer_head *bh_result, int create);
-typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
-			ssize_t bytes, void *private, int ret,
-			bool is_async);
-
 /*
  * Attribute flags.  These should be or-ed together to figure out what
  * has been changed!
@@ -2877,5 +2546,4 @@ static inline void inode_has_no_xattr(struct inode *inode)
 		inode->i_flags |= S_NOSEC;
 }
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_FS_H */
diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h
index 1cebaeeeef57a1d416c94f87ec8dcadc491474a3..2a707d7fb32c675a51f35233048a5a850730ec6d 100644
--- a/include/linux/fsl_hypervisor.h
+++ b/include/linux/fsl_hypervisor.h
@@ -36,187 +36,11 @@
  * also be included by applications that need to communicate with the driver
  * via the ioctl interface.
  */
-
 #ifndef FSL_HYPERVISOR_H
 #define FSL_HYPERVISOR_H
 
-#include <linux/types.h>
-
-/**
- * struct fsl_hv_ioctl_restart - restart a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to restart, or -1 for the
- *             calling partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_RESTART
- */
-struct fsl_hv_ioctl_restart {
-	__u32 ret;
-	__u32 partition;
-};
+#include <uapi/linux/fsl_hypervisor.h>
 
-/**
- * struct fsl_hv_ioctl_status - get a partition's status
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to query, or -1 for the
- *             calling partition
- * @status: The returned status of the partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
- *
- * Values of 'status':
- *    0 = Stopped
- *    1 = Running
- *    2 = Starting
- *    3 = Stopping
- */
-struct fsl_hv_ioctl_status {
-	__u32 ret;
-	__u32 partition;
-	__u32 status;
-};
-
-/**
- * struct fsl_hv_ioctl_start - start a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to control
- * @entry_point: The offset within the guest IMA to start execution
- * @load: If non-zero, reload the partition's images before starting
- *
- * Used by FSL_HV_IOCTL_PARTITION_START
- */
-struct fsl_hv_ioctl_start {
-	__u32 ret;
-	__u32 partition;
-	__u32 entry_point;
-	__u32 load;
-};
-
-/**
- * struct fsl_hv_ioctl_stop - stop a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to stop, or -1 for the calling
- *             partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_STOP
- */
-struct fsl_hv_ioctl_stop {
-	__u32 ret;
-	__u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_memcpy - copy memory between partitions
- * @ret: return error code from the hypervisor
- * @source: the partition ID of the source partition, or -1 for this
- *          partition
- * @target: the partition ID of the target partition, or -1 for this
- *          partition
- * @reserved: reserved, must be set to 0
- * @local_addr: user-space virtual address of a buffer in the local
- *              partition
- * @remote_addr: guest physical address of a buffer in the
- *           remote partition
- * @count: the number of bytes to copy.  Both the local and remote
- *         buffers must be at least 'count' bytes long
- *
- * Used by FSL_HV_IOCTL_MEMCPY
- *
- * The 'local' partition is the partition that calls this ioctl.  The
- * 'remote' partition is a different partition.  The data is copied from
- * the 'source' paritition' to the 'target' partition.
- *
- * The buffer in the remote partition must be guest physically
- * contiguous.
- *
- * This ioctl does not support copying memory between two remote
- * partitions or within the same partition, so either 'source' or
- * 'target' (but not both) must be -1.  In other words, either
- *
- *      source == local and target == remote
- * or
- *      source == remote and target == local
- */
-struct fsl_hv_ioctl_memcpy {
-	__u32 ret;
-	__u32 source;
-	__u32 target;
-	__u32 reserved;	/* padding to ensure local_vaddr is aligned */
-	__u64 local_vaddr;
-	__u64 remote_paddr;
-	__u64 count;
-};
-
-/**
- * struct fsl_hv_ioctl_doorbell - ring a doorbell
- * @ret: return error code from the hypervisor
- * @doorbell: the handle of the doorbell to ring doorbell
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_doorbell {
-	__u32 ret;
-	__u32 doorbell;
-};
-
-/**
- * struct fsl_hv_ioctl_prop - get/set a device tree property
- * @ret: return error code from the hypervisor
- * @handle: handle of partition whose tree to access
- * @path: virtual address of path name of node to access
- * @propname: virtual address of name of property to access
- * @propval: virtual address of property data buffer
- * @proplen: Size of property data buffer
- * @reserved: reserved, must be set to 0
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_prop {
-	__u32 ret;
-	__u32 handle;
-	__u64 path;
-	__u64 propname;
-	__u64 propval;
-	__u32 proplen;
-	__u32 reserved;	/* padding to ensure structure is aligned */
-};
-
-/* The ioctl type, documented in ioctl-number.txt */
-#define FSL_HV_IOCTL_TYPE	0xAF
-
-/* Restart another partition */
-#define FSL_HV_IOCTL_PARTITION_RESTART \
-	_IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
-
-/* Get a partition's status */
-#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
-	_IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
-
-/* Boot another partition */
-#define FSL_HV_IOCTL_PARTITION_START \
-	_IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
-
-/* Stop this or another partition */
-#define FSL_HV_IOCTL_PARTITION_STOP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
-
-/* Copy data from one partition to another */
-#define FSL_HV_IOCTL_MEMCPY \
-	_IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
-
-/* Ring a doorbell */
-#define FSL_HV_IOCTL_DOORBELL \
-	_IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
-
-/* Get a property from another guest's device tree */
-#define FSL_HV_IOCTL_GETPROP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
-
-/* Set a property in another guest's device tree */
-#define FSL_HV_IOCTL_SETPROP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
-
-#ifdef __KERNEL__
 
 /**
  * fsl_hv_event_register() - register a callback for failover events
@@ -237,5 +61,3 @@ int fsl_hv_failover_register(struct notifier_block *nb);
 int fsl_hv_failover_unregister(struct notifier_block *nb);
 
 #endif
-
-#endif
diff --git a/include/linux/futex.h b/include/linux/futex.h
index 1e5a26d7923216e2de6883fff7c4faf6f5507036..b0d95cac826e8f310aee6dfa999c69ee56727bfb 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -1,129 +1,8 @@
 #ifndef _LINUX_FUTEX_H
 #define _LINUX_FUTEX_H
 
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/futex.h>
 
-/* Second argument to futex syscall */
-
-
-#define FUTEX_WAIT		0
-#define FUTEX_WAKE		1
-#define FUTEX_FD		2
-#define FUTEX_REQUEUE		3
-#define FUTEX_CMP_REQUEUE	4
-#define FUTEX_WAKE_OP		5
-#define FUTEX_LOCK_PI		6
-#define FUTEX_UNLOCK_PI		7
-#define FUTEX_TRYLOCK_PI	8
-#define FUTEX_WAIT_BITSET	9
-#define FUTEX_WAKE_BITSET	10
-#define FUTEX_WAIT_REQUEUE_PI	11
-#define FUTEX_CMP_REQUEUE_PI	12
-
-#define FUTEX_PRIVATE_FLAG	128
-#define FUTEX_CLOCK_REALTIME	256
-#define FUTEX_CMD_MASK		~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
-
-#define FUTEX_WAIT_PRIVATE	(FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_PRIVATE	(FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_REQUEUE_PRIVATE	(FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_OP_PRIVATE	(FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
-#define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
-					 FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
-					 FUTEX_PRIVATE_FLAG)
-
-/*
- * Support for robust futexes: the kernel cleans up held futexes at
- * thread exit time.
- */
-
-/*
- * Per-lock list entry - embedded in user-space locks, somewhere close
- * to the futex field. (Note: user-space uses a double-linked list to
- * achieve O(1) list add and remove, but the kernel only needs to know
- * about the forward link)
- *
- * NOTE: this structure is part of the syscall ABI, and must not be
- * changed.
- */
-struct robust_list {
-	struct robust_list __user *next;
-};
-
-/*
- * Per-thread list head:
- *
- * NOTE: this structure is part of the syscall ABI, and must only be
- * changed if the change is first communicated with the glibc folks.
- * (When an incompatible change is done, we'll increase the structure
- *  size, which glibc will detect)
- */
-struct robust_list_head {
-	/*
-	 * The head of the list. Points back to itself if empty:
-	 */
-	struct robust_list list;
-
-	/*
-	 * This relative offset is set by user-space, it gives the kernel
-	 * the relative position of the futex field to examine. This way
-	 * we keep userspace flexible, to freely shape its data-structure,
-	 * without hardcoding any particular offset into the kernel:
-	 */
-	long futex_offset;
-
-	/*
-	 * The death of the thread may race with userspace setting
-	 * up a lock's links. So to handle this race, userspace first
-	 * sets this field to the address of the to-be-taken lock,
-	 * then does the lock acquire, and then adds itself to the
-	 * list, and then clears this field. Hence the kernel will
-	 * always have full knowledge of all locks that the thread
-	 * _might_ have taken. We check the owner TID in any case,
-	 * so only truly owned locks will be handled.
-	 */
-	struct robust_list __user *list_op_pending;
-};
-
-/*
- * Are there any waiters for this robust futex:
- */
-#define FUTEX_WAITERS		0x80000000
-
-/*
- * The kernel signals via this bit that a thread holding a futex
- * has exited without unlocking the futex. The kernel also does
- * a FUTEX_WAKE on such futexes, after setting the bit, to wake
- * up any possible waiters:
- */
-#define FUTEX_OWNER_DIED	0x40000000
-
-/*
- * The rest of the robust-futex field is for the TID:
- */
-#define FUTEX_TID_MASK		0x3fffffff
-
-/*
- * This limit protects against a deliberately circular list.
- * (Not worth introducing an rlimit for it)
- */
-#define ROBUST_LIST_LIMIT	2048
-
-/*
- * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
- * match of any bit.
- */
-#define FUTEX_BITSET_MATCH_ANY	0xffffffff
-
-#ifdef __KERNEL__
 struct inode;
 struct mm_struct;
 struct task_struct;
@@ -185,31 +64,4 @@ static inline void exit_pi_state_list(struct task_struct *curr)
 {
 }
 #endif
-#endif /* __KERNEL__ */
-
-#define FUTEX_OP_SET		0	/* *(int *)UADDR2 = OPARG; */
-#define FUTEX_OP_ADD		1	/* *(int *)UADDR2 += OPARG; */
-#define FUTEX_OP_OR		2	/* *(int *)UADDR2 |= OPARG; */
-#define FUTEX_OP_ANDN		3	/* *(int *)UADDR2 &= ~OPARG; */
-#define FUTEX_OP_XOR		4	/* *(int *)UADDR2 ^= OPARG; */
-
-#define FUTEX_OP_OPARG_SHIFT	8	/* Use (1 << OPARG) instead of OPARG.  */
-
-#define FUTEX_OP_CMP_EQ		0	/* if (oldval == CMPARG) wake */
-#define FUTEX_OP_CMP_NE		1	/* if (oldval != CMPARG) wake */
-#define FUTEX_OP_CMP_LT		2	/* if (oldval < CMPARG) wake */
-#define FUTEX_OP_CMP_LE		3	/* if (oldval <= CMPARG) wake */
-#define FUTEX_OP_CMP_GT		4	/* if (oldval > CMPARG) wake */
-#define FUTEX_OP_CMP_GE		5	/* if (oldval >= CMPARG) wake */
-
-/* FUTEX_WAKE_OP will perform atomically
-   int oldval = *(int *)UADDR2;
-   *(int *)UADDR2 = oldval OP OPARG;
-   if (oldval CMP CMPARG)
-     wake UADDR2;  */
-
-#define FUTEX_OP(op, oparg, cmp, cmparg) \
-  (((op & 0xf) << 28) | ((cmp & 0xf) << 24)		\
-   | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
-
 #endif
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index b986be513406f51fb8abc66d9a26fbe324e30470..bb7de09e8d57a37fcf9e3378dfd7498eb08af6cb 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -1,6 +1,3 @@
-#ifndef _GAMEPORT_H
-#define _GAMEPORT_H
-
 /*
  *  Copyright (c) 1999-2002 Vojtech Pavlik
  *
@@ -8,8 +5,9 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _GAMEPORT_H
+#define _GAMEPORT_H
 
-#ifdef __KERNEL__
 #include <asm/io.h>
 #include <linux/types.h>
 #include <linux/list.h>
@@ -17,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
+#include <uapi/linux/gameport.h>
 
 struct gameport {
 
@@ -166,24 +165,6 @@ void gameport_unregister_driver(struct gameport_driver *drv);
 	module_driver(__gameport_driver, gameport_register_driver, \
 		       gameport_unregister_driver)
 
-#endif /* __KERNEL__ */
-
-#define GAMEPORT_MODE_DISABLED		0
-#define GAMEPORT_MODE_RAW		1
-#define GAMEPORT_MODE_COOKED		2
-
-#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
-#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
-#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
-#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
-#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
-#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
-#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
-#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
-#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
-#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
-
-#ifdef __KERNEL__
 
 static inline void gameport_trigger(struct gameport *gameport)
 {
@@ -235,5 +216,4 @@ static inline void gameport_set_poll_interval(struct gameport *gameport, unsigne
 void gameport_start_polling(struct gameport *gameport);
 void gameport_stop_polling(struct gameport *gameport);
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h
index 5ab61c1eb6bf2c5ab1234aaee230d61991eef535..55b685719d522da32a37ba59013d1f029ff6a37e 100644
--- a/include/linux/genetlink.h
+++ b/include/linux/genetlink.h
@@ -1,86 +1,8 @@
 #ifndef __LINUX_GENERIC_NETLINK_H
 #define __LINUX_GENERIC_NETLINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/genetlink.h>
 
-#define GENL_NAMSIZ	16	/* length of family name */
-
-#define GENL_MIN_ID	NLMSG_MIN_TYPE
-#define GENL_MAX_ID	1023
-
-struct genlmsghdr {
-	__u8	cmd;
-	__u8	version;
-	__u16	reserved;
-};
-
-#define GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct genlmsghdr))
-
-#define GENL_ADMIN_PERM		0x01
-#define GENL_CMD_CAP_DO		0x02
-#define GENL_CMD_CAP_DUMP	0x04
-#define GENL_CMD_CAP_HASPOL	0x08
-
-/*
- * List of reserved static generic netlink identifiers:
- */
-#define GENL_ID_GENERATE	0
-#define GENL_ID_CTRL		NLMSG_MIN_TYPE
-
-/**************************************************************************
- * Controller
- **************************************************************************/
-
-enum {
-	CTRL_CMD_UNSPEC,
-	CTRL_CMD_NEWFAMILY,
-	CTRL_CMD_DELFAMILY,
-	CTRL_CMD_GETFAMILY,
-	CTRL_CMD_NEWOPS,
-	CTRL_CMD_DELOPS,
-	CTRL_CMD_GETOPS,
-	CTRL_CMD_NEWMCAST_GRP,
-	CTRL_CMD_DELMCAST_GRP,
-	CTRL_CMD_GETMCAST_GRP, /* unused */
-	__CTRL_CMD_MAX,
-};
-
-#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
-
-enum {
-	CTRL_ATTR_UNSPEC,
-	CTRL_ATTR_FAMILY_ID,
-	CTRL_ATTR_FAMILY_NAME,
-	CTRL_ATTR_VERSION,
-	CTRL_ATTR_HDRSIZE,
-	CTRL_ATTR_MAXATTR,
-	CTRL_ATTR_OPS,
-	CTRL_ATTR_MCAST_GROUPS,
-	__CTRL_ATTR_MAX,
-};
-
-#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
-
-enum {
-	CTRL_ATTR_OP_UNSPEC,
-	CTRL_ATTR_OP_ID,
-	CTRL_ATTR_OP_FLAGS,
-	__CTRL_ATTR_OP_MAX,
-};
-
-#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
-
-enum {
-	CTRL_ATTR_MCAST_GRP_UNSPEC,
-	CTRL_ATTR_MCAST_GRP_NAME,
-	CTRL_ATTR_MCAST_GRP_ID,
-	__CTRL_ATTR_MCAST_GRP_MAX,
-};
-
-#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
-
-#ifdef __KERNEL__
 
 /* All generic netlink requests are serialized by a global lock.  */
 extern void genl_lock(void);
@@ -113,6 +35,4 @@ extern int lockdep_genl_is_held(void);
 #define MODULE_ALIAS_GENL_FAMILY(family)\
  MODULE_ALIAS_NET_PF_PROTO_NAME(PF_NETLINK, NETLINK_GENERIC, "-family-" family)
 
-#endif /* __KERNEL__ */
-
 #endif	/* __LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index ee275c8b3df116a6643db8aa68148cca0480137a..1acb1445e05fe5f03ce33f8cdc6a03c35ae59763 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -7,24 +7,14 @@
  * under the terms of version 2 of the GNU General Public License
  * as published by the Free Software Foundation.
  */
-
 #ifndef __HDLC_H
 #define __HDLC_H
 
 
-#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
-#if 0
-#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
-#else
-#define HDLC_MAX_MRU 1600 /* as required for FR network */
-#endif
-
-
-#ifdef __KERNEL__
-
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/hdlc/ioctl.h>
+#include <uapi/linux/hdlc.h>
 
 /* This structure is a private property of HDLC protocols.
    Hardware drivers have no interest here */
@@ -127,5 +117,4 @@ static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb,
 		return htons(ETH_P_HDLC);
 }
 
-#endif /* __KERNEL */
 #endif /* __HDLC_H */
diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h
index c010b4a785b8f7d5c7142232fdfd85fc412d69d4..be3be25bb898f549376945e9ad5fd6a365e40ade 100644
--- a/include/linux/hdlcdrv.h
+++ b/include/linux/hdlcdrv.h
@@ -3,110 +3,14 @@
  * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
  * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
  */
-
 #ifndef _HDLCDRV_H
 #define _HDLCDRV_H
 
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct hdlcdrv_params {
-	int iobase;
-	int irq;
-	int dma;
-	int dma2;
-	int seriobase;
-	int pariobase;
-	int midiiobase;
-};	
-
-struct hdlcdrv_channel_params {
-	int tx_delay;  /* the transmitter keyup delay in 10ms units */
-	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
-	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
-	int ppersist;  /* the p-persistence 0..255 */
-	int fulldup;   /* some driver do not support full duplex, setting */
-	               /* this just makes them send even if DCD is on */
-};	
-
-struct hdlcdrv_old_channel_state {
-  	int ptt;
-  	int dcd;
-  	int ptt_keyed;
-};
-
-struct hdlcdrv_channel_state {
- 	int ptt;
- 	int dcd;
- 	int ptt_keyed;
- 	unsigned long tx_packets;
- 	unsigned long tx_errors;
- 	unsigned long rx_packets;
- 	unsigned long rx_errors;
-};
-
-struct hdlcdrv_ioctl {
-	int cmd;
-	union {
-		struct hdlcdrv_params mp;
-		struct hdlcdrv_channel_params cp;
-		struct hdlcdrv_channel_state cs;
-		struct hdlcdrv_old_channel_state ocs;
-		unsigned int calibrate;
-		unsigned char bits;
-		char modename[128];
-		char drivername[32];
-	} data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values
- */
-#define HDLCDRVCTL_GETMODEMPAR       0
-#define HDLCDRVCTL_SETMODEMPAR       1
-#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
-#define HDLCDRVCTL_GETCHANNELPAR    10
-#define HDLCDRVCTL_SETCHANNELPAR    11
-#define HDLCDRVCTL_OLDGETSTAT       20
-#define HDLCDRVCTL_CALIBRATE        21
-#define HDLCDRVCTL_GETSTAT          22
-
-/*
- * these are mainly for debugging purposes
- */
-#define HDLCDRVCTL_GETSAMPLES       30
-#define HDLCDRVCTL_GETBITS          31
-
-/*
- * not handled by hdlcdrv, but by its depending drivers
- */
-#define HDLCDRVCTL_GETMODE          40
-#define HDLCDRVCTL_SETMODE          41
-#define HDLCDRVCTL_MODELIST         42
-#define HDLCDRVCTL_DRIVERNAME       43
-
-/*
- * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
- */
-#define HDLCDRV_PARMASK_IOBASE      (1<<0)
-#define HDLCDRV_PARMASK_IRQ         (1<<1)
-#define HDLCDRV_PARMASK_DMA         (1<<2)
-#define HDLCDRV_PARMASK_DMA2        (1<<3)
-#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
-#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
-#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
-
-/* -------------------------------------------------------------------- */
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
 #include <linux/if.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/hdlcdrv.h>
 
 #define HDLCDRV_MAGIC      0x5ac6e778
 #define HDLCDRV_HDLCBUFFER  32 /* should be a power of 2 for speed reasons */
@@ -368,10 +272,4 @@ void hdlcdrv_unregister(struct net_device *dev);
 
 
 
-#endif /* __KERNEL__ */
-
-/* -------------------------------------------------------------------- */
-
 #endif /* _HDLCDRV_H */
-
-/* -------------------------------------------------------------------- */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 7e1f37db7582260231fa8bb6edf435335e4e128b..c076041a069e88ee700e12d1bf5d3ca4b6f0a2eb 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -1,12 +1,8 @@
-#ifndef __HID_H
-#define __HID_H
-
 /*
  *  Copyright (c) 1999 Andreas Gal
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *  Copyright (c) 2006-2007 Jiri Kosina
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,43 +22,9 @@
  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
+#ifndef __HID_H
+#define __HID_H
 
-/*
- * USB HID (Human Interface Device) interface class code
- */
-
-#define USB_INTERFACE_CLASS_HID		3
-
-/*
- * USB HID interface subclass and protocol codes
- */
-
-#define USB_INTERFACE_SUBCLASS_BOOT	1
-#define USB_INTERFACE_PROTOCOL_KEYBOARD	1
-#define USB_INTERFACE_PROTOCOL_MOUSE	2
-
-/*
- * HID class requests
- */
-
-#define HID_REQ_GET_REPORT		0x01
-#define HID_REQ_GET_IDLE		0x02
-#define HID_REQ_GET_PROTOCOL		0x03
-#define HID_REQ_SET_REPORT		0x09
-#define HID_REQ_SET_IDLE		0x0A
-#define HID_REQ_SET_PROTOCOL		0x0B
-
-/*
- * HID class descriptor types
- */
-
-#define HID_DT_HID			(USB_TYPE_CLASS | 0x01)
-#define HID_DT_REPORT			(USB_TYPE_CLASS | 0x02)
-#define HID_DT_PHYSICAL			(USB_TYPE_CLASS | 0x03)
-
-#define HID_MAX_DESCRIPTOR_SIZE		4096
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/slab.h>
@@ -73,6 +35,7 @@
 #include <linux/input.h>
 #include <linux/semaphore.h>
 #include <linux/power_supply.h>
+#include <uapi/linux/hid.h>
 
 /*
  * We parse each description item into this structure. Short items data
@@ -943,7 +906,4 @@ do {									\
 #define hid_dbg(hid, fmt, arg...)			\
 	dev_dbg(&(hid)->dev, fmt, ##arg)
 
-#endif /* __KERNEL__ */
-
 #endif
-
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index a3f481a3063b5d1cb14ec91aca8ff386592ae506..a5dd8148660b7eb15482c99b1a602226007ec840 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -1,12 +1,8 @@
-#ifndef _HIDDEV_H
-#define _HIDDEV_H
-
 /*
  *  Copyright (c) 1999-2000 Vojtech Pavlik
  *
  *  Sponsored by SuSE
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,190 +22,11 @@
  * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
+#ifndef _HIDDEV_H
+#define _HIDDEV_H
 
-#include <linux/types.h>
-
-/*
- * The event structure itself
- */
-
-struct hiddev_event {
-	unsigned hid;
-	signed int value;
-};
-
-struct hiddev_devinfo {
-	__u32 bustype;
-	__u32 busnum;
-	__u32 devnum;
-	__u32 ifnum;
-	__s16 vendor;
-	__s16 product;
-	__s16 version;
-	__u32 num_applications;
-};
-
-struct hiddev_collection_info {
-	__u32 index;
-	__u32 type;
-	__u32 usage;
-	__u32 level;
-};
-
-#define HID_STRING_SIZE 256
-struct hiddev_string_descriptor {
-	__s32 index;
-	char value[HID_STRING_SIZE];
-};
-
-struct hiddev_report_info {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 num_fields;
-};
-
-/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
- * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
- * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
- * successful GUSAGE call to save time.  To actually send a value to the
- * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
- * GREPORT isn't necessary for a GUSAGE to return valid data.
- */
-#define HID_REPORT_ID_UNKNOWN 0xffffffff
-#define HID_REPORT_ID_FIRST   0x00000100
-#define HID_REPORT_ID_NEXT    0x00000200
-#define HID_REPORT_ID_MASK    0x000000ff
-#define HID_REPORT_ID_MAX     0x000000ff
-
-#define HID_REPORT_TYPE_INPUT	1
-#define HID_REPORT_TYPE_OUTPUT	2
-#define HID_REPORT_TYPE_FEATURE	3
-#define HID_REPORT_TYPE_MIN     1
-#define HID_REPORT_TYPE_MAX     3
-
-struct hiddev_field_info {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 field_index;
-	__u32 maxusage;
-	__u32 flags;
-	__u32 physical;		/* physical usage for this field */
-	__u32 logical;		/* logical usage for this field */
-	__u32 application;		/* application usage for this field */
-	__s32 logical_minimum;
-	__s32 logical_maximum;
-	__s32 physical_minimum;
-	__s32 physical_maximum;
-	__u32 unit_exponent;
-	__u32 unit;
-};
-
-/* Fill in report_type, report_id and field_index to get the information on a
- * field.
- */
-#define HID_FIELD_CONSTANT		0x001
-#define HID_FIELD_VARIABLE		0x002
-#define HID_FIELD_RELATIVE		0x004
-#define HID_FIELD_WRAP			0x008	
-#define HID_FIELD_NONLINEAR		0x010
-#define HID_FIELD_NO_PREFERRED		0x020
-#define HID_FIELD_NULL_STATE		0x040
-#define HID_FIELD_VOLATILE		0x080
-#define HID_FIELD_BUFFERED_BYTE		0x100
-
-struct hiddev_usage_ref {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 field_index;
-	__u32 usage_index;
-	__u32 usage_code;
-	__s32 value;
-};
-
-/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
- * It really manifests itself as setting the value of consecutive usages */
-#define HID_MAX_MULTI_USAGES 1024
-struct hiddev_usage_ref_multi {
-	struct hiddev_usage_ref uref;
-	__u32 num_values;
-	__s32 values[HID_MAX_MULTI_USAGES];
-};
-
-/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
- * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
- * been sent by the device 
- */
-#define HID_FIELD_INDEX_NONE 0xffffffff
-
-/*
- * Protocol version.
- */
-
-#define HID_VERSION		0x010004
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-#define HIDIOCGVERSION		_IOR('H', 0x01, int)
-#define HIDIOCAPPLICATION	_IO('H', 0x02)
-#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
-#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
-#define HIDIOCINITREPORT	_IO('H', 0x05)
-#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
-#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
-#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
-#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
-#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
-#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
-#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
-#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
-#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
-#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
-#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
-#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
-
-/* For writing/reading to multiple/consecutive usages */
-#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
-#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
-
-/* 
- * Flags to be used in HIDIOCSFLAG
- */
-#define HIDDEV_FLAG_UREF	0x1
-#define HIDDEV_FLAG_REPORT	0x2
-#define HIDDEV_FLAGS		0x3
-
-/* To traverse the input report descriptor info for a HID device, perform the 
- * following:
- *
- * rinfo.report_type = HID_REPORT_TYPE_INPUT;
- * rinfo.report_id = HID_REPORT_ID_FIRST;
- * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- *
- * while (ret >= 0) {
- * 	for (i = 0; i < rinfo.num_fields; i++) {
- * 		finfo.report_type = rinfo.report_type;
- * 		finfo.report_id = rinfo.report_id;
- * 		finfo.field_index = i;
- * 		ioctl(fd, HIDIOCGFIELDINFO, &finfo);
- * 		for (j = 0; j < finfo.maxusage; j++) {
- * 			uref.report_type = rinfo.report_type;
- * 			uref.report_id = rinfo.report_id;
- * 			uref.field_index = i;
- * 			uref.usage_index = j;
- * 			ioctl(fd, HIDIOCGUCODE, &uref);
- * 			ioctl(fd, HIDIOCGUSAGE, &uref);
- * 		}
- * 	}
- * 	rinfo.report_id |= HID_REPORT_ID_NEXT;
- * 	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- * }
- */
-
+#include <uapi/linux/hiddev.h>
 
-#ifdef __KERNEL__
 
 /*
  * In-kernel definitions.
@@ -237,4 +54,3 @@ static inline void hiddev_report_event(struct hid_device *hid, struct hid_report
 #endif
 
 #endif
-#endif
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
index 45e9fcb8d8777884e0ecf0c428b3c8015d189f9f..2451662c728a7881e5d7d42fe02d17c15ce86914 100644
--- a/include/linux/hidraw.h
+++ b/include/linux/hidraw.h
@@ -1,10 +1,6 @@
-#ifndef _HIDRAW_H
-#define _HIDRAW_H
-
 /*
  *  Copyright (c) 2007 Jiri Kosina
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -14,39 +10,11 @@
  * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  */
+#ifndef _HIDRAW_H
+#define _HIDRAW_H
 
-#include <linux/hid.h>
-#include <linux/types.h>
-
-struct hidraw_report_descriptor {
-	__u32 size;
-	__u8 value[HID_MAX_DESCRIPTOR_SIZE];
-};
-
-struct hidraw_devinfo {
-	__u32 bustype;
-	__s16 vendor;
-	__s16 product;
-};
-
-/* ioctl interface */
-#define HIDIOCGRDESCSIZE	_IOR('H', 0x01, int)
-#define HIDIOCGRDESC		_IOR('H', 0x02, struct hidraw_report_descriptor)
-#define HIDIOCGRAWINFO		_IOR('H', 0x03, struct hidraw_devinfo)
-#define HIDIOCGRAWNAME(len)     _IOC(_IOC_READ, 'H', 0x04, len)
-#define HIDIOCGRAWPHYS(len)     _IOC(_IOC_READ, 'H', 0x05, len)
-/* The first byte of SFEATURE and GFEATURE is the report number */
-#define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
-
-#define HIDRAW_FIRST_MINOR 0
-#define HIDRAW_MAX_DEVICES 64
-/* number of reports to buffer */
-#define HIDRAW_BUFFER_SIZE 64
-
+#include <uapi/linux/hidraw.h>
 
-/* kernel-only API declarations */
-#ifdef __KERNEL__
 
 struct hidraw {
 	unsigned int minor;
@@ -88,5 +56,3 @@ static inline void hidraw_disconnect(struct hid_device *hid) { }
 #endif
 
 #endif
-
-#endif
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
index 219ca4f6bea66a0a755101ea2d9c615a67854283..9427ab4e01c3594c7354380abad13e0b6e31bad0 100644
--- a/include/linux/hpet.h
+++ b/include/linux/hpet.h
@@ -1,9 +1,8 @@
 #ifndef	__HPET__
 #define	__HPET__ 1
 
-#include <linux/compiler.h>
+#include <uapi/linux/hpet.h>
 
-#ifdef __KERNEL__
 
 /*
  * Offsets into HPET Registers
@@ -108,24 +107,4 @@ static inline void hpet_reserve_timer(struct hpet_data *hd, int timer)
 
 int hpet_alloc(struct hpet_data *);
 
-#endif /* __KERNEL__ */
-
-struct hpet_info {
-	unsigned long hi_ireqfreq;	/* Hz */
-	unsigned long hi_flags;	/* information */
-	unsigned short hi_hpet;
-	unsigned short hi_timer;
-};
-
-#define HPET_INFO_PERIODIC	0x0010	/* periodic-capable comparator */
-
-#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
-#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
-#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
-#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
-#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
-#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
-
-#define MAX_HPET_TBS	8		/* maximum hpet timer blocks */
-
 #endif				/* !__HPET__ */
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
index 8a7406b2114df7731fed5827e6f6696ef376d6f5..79727144c5cdaf14bd0b3eb0d692a2f93051f263 100644
--- a/include/linux/i2c-dev.h
+++ b/include/linux/i2c-dev.h
@@ -19,57 +19,10 @@
     Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
     MA 02110-1301 USA.
 */
-
 #ifndef _LINUX_I2C_DEV_H
 #define _LINUX_I2C_DEV_H
 
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
- * unsigned long, except for:
- *	- I2C_FUNCS, takes pointer to an unsigned long
- *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
- *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
- */
-#define I2C_RETRIES	0x0701	/* number of times a device address should
-				   be polled when not acknowledging */
-#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
-
-/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
- * are NOT supported! (due to code brokenness)
- */
-#define I2C_SLAVE	0x0703	/* Use this slave address */
-#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
-				   is already in use by a driver! */
-#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
-
-#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
-
-#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
-
-#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
-#define I2C_SMBUS	0x0720	/* SMBus transfer */
+#include <uapi/linux/i2c-dev.h>
 
-
-/* This is the structure as used in the I2C_SMBUS ioctl call */
-struct i2c_smbus_ioctl_data {
-	__u8 read_write;
-	__u8 command;
-	__u32 size;
-	union i2c_smbus_data __user *data;
-};
-
-/* This is the structure as used in the I2C_RDWR ioctl call */
-struct i2c_rdwr_ioctl_data {
-	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
-	__u32 nmsgs;			/* number of i2c_msgs */
-};
-
-#define  I2C_RDRW_IOCTL_MAX_MSGS	42
-
-#ifdef __KERNEL__
 #define I2C_MAJOR	89		/* Device major number		*/
-#endif
-
 #endif /* _LINUX_I2C_DEV_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 94aed0c85bb02066787da65ea55ecee60e2161ca..800de224336bc7c6943008eabce6fa9448b4fdf0 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -23,18 +23,16 @@
 
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
    Frodo Looijaard <frodol@dds.nl> */
-
 #ifndef _LINUX_I2C_H
 #define _LINUX_I2C_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/mod_devicetable.h>
 #include <linux/device.h>	/* for struct device */
 #include <linux/sched.h>	/* for completion */
 #include <linux/mutex.h>
 #include <linux/of.h>		/* for struct device_node */
 #include <linux/swab.h>		/* for swab16 */
+#include <uapi/linux/i2c.h>
 
 extern struct bus_type i2c_bus_type;
 extern struct device_type i2c_adapter_type;
@@ -503,125 +501,4 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap)
 			i2c_del_driver)
 
 #endif /* I2C */
-#endif /* __KERNEL__ */
-
-/**
- * struct i2c_msg - an I2C transaction segment beginning with START
- * @addr: Slave address, either seven or ten bits.  When this is a ten
- *	bit address, I2C_M_TEN must be set in @flags and the adapter
- *	must support I2C_FUNC_10BIT_ADDR.
- * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
- *	provided unless the adapter exported the relevant I2C_FUNC_*
- *	flags through i2c_check_functionality().
- * @len: Number of data bytes in @buf being read from or written to the
- *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
- *	is set, the caller guarantees that this buffer can hold up to
- *	32 bytes in addition to the initial length byte sent by the
- *	slave (plus, if used, the SMBus PEC); and this value will be
- *	incremented by the number of block data bytes received.
- * @buf: The buffer into which data is read, or from which it's written.
- *
- * An i2c_msg is the low level representation of one segment of an I2C
- * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
- * to userspace from i2c-dev, and to I2C adapter drivers through the
- * @i2c_adapter.@master_xfer() method.
- *
- * Except when I2C "protocol mangling" is used, all I2C adapters implement
- * the standard rules for I2C transactions.  Each transaction begins with a
- * START.  That is followed by the slave address, and a bit encoding read
- * versus write.  Then follow all the data bytes, possibly including a byte
- * with SMBus PEC.  The transfer terminates with a NAK, or when all those
- * bytes have been transferred and ACKed.  If this is the last message in a
- * group, it is followed by a STOP.  Otherwise it is followed by the next
- * @i2c_msg transaction segment, beginning with a (repeated) START.
- *
- * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
- * passing certain @flags may have changed those standard protocol behaviors.
- * Those flags are only for use with broken/nonconforming slaves, and with
- * adapters which are known to support the specific mangling options they
- * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
- */
-struct i2c_msg {
-	__u16 addr;	/* slave address			*/
-	__u16 flags;
-#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
-#define I2C_M_RD		0x0001	/* read data, from slave to master */
-#define I2C_M_STOP		0x8000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_NOSTART */
-#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
-	__u16 len;		/* msg length				*/
-	__u8 *buf;		/* pointer to msg data			*/
-};
-
-/* To determine what functionality is present */
-
-#define I2C_FUNC_I2C			0x00000001
-#define I2C_FUNC_10BIT_ADDR		0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_IGNORE_NAK etc. */
-#define I2C_FUNC_SMBUS_PEC		0x00000008
-#define I2C_FUNC_NOSTART		0x00000010 /* I2C_M_NOSTART */
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK		0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
-
-#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
-					 I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
-					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-
-#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
-					 I2C_FUNC_SMBUS_BYTE | \
-					 I2C_FUNC_SMBUS_BYTE_DATA | \
-					 I2C_FUNC_SMBUS_WORD_DATA | \
-					 I2C_FUNC_SMBUS_PROC_CALL | \
-					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
-					 I2C_FUNC_SMBUS_I2C_BLOCK | \
-					 I2C_FUNC_SMBUS_PEC)
-
-/*
- * Data for SMBus Messages
- */
-#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
-union i2c_smbus_data {
-	__u8 byte;
-	__u16 word;
-	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
-			       /* and one more for user-space compatibility */
-};
-
-/* i2c_smbus_xfer read or write markers */
-#define I2C_SMBUS_READ	1
-#define I2C_SMBUS_WRITE	0
-
-/* SMBus transaction types (size parameter in the above functions)
-   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
-#define I2C_SMBUS_QUICK		    0
-#define I2C_SMBUS_BYTE		    1
-#define I2C_SMBUS_BYTE_DATA	    2
-#define I2C_SMBUS_WORD_DATA	    3
-#define I2C_SMBUS_PROC_CALL	    4
-#define I2C_SMBUS_BLOCK_DATA	    5
-#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
-#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
-#define I2C_SMBUS_I2C_BLOCK_DATA    8
-
 #endif /* _LINUX_I2C_H */
diff --git a/include/linux/icmp.h b/include/linux/icmp.h
index 474f2a51cf0af66474be229b626403975a36683c..efc18490627a3eddb94866de6935b457d1e63454 100644
--- a/include/linux/icmp.h
+++ b/include/linux/icmp.h
@@ -17,89 +17,11 @@
 #ifndef _LINUX_ICMP_H
 #define	_LINUX_ICMP_H
 
-#include <linux/types.h>
-
-#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
-#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
-#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
-#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
-#define ICMP_ECHO		8	/* Echo Request			*/
-#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
-#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
-#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
-#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
-#define ICMP_INFO_REQUEST	15	/* Information Request		*/
-#define ICMP_INFO_REPLY		16	/* Information Reply		*/
-#define ICMP_ADDRESS		17	/* Address Mask Request		*/
-#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
-#define NR_ICMP_TYPES		18
-
-
-/* Codes for UNREACH. */
-#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
-#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
-#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
-#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
-#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
-#define ICMP_SR_FAILED		5	/* Source Route failed		*/
-#define ICMP_NET_UNKNOWN	6
-#define ICMP_HOST_UNKNOWN	7
-#define ICMP_HOST_ISOLATED	8
-#define ICMP_NET_ANO		9
-#define ICMP_HOST_ANO		10
-#define ICMP_NET_UNR_TOS	11
-#define ICMP_HOST_UNR_TOS	12
-#define ICMP_PKT_FILTERED	13	/* Packet filtered */
-#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
-#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
-#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
-
-/* Codes for REDIRECT. */
-#define ICMP_REDIR_NET		0	/* Redirect Net			*/
-#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
-#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
-#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
-
-/* Codes for TIME_EXCEEDED. */
-#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
-#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
-
-
-struct icmphdr {
-  __u8		type;
-  __u8		code;
-  __sum16	checksum;
-  union {
-	struct {
-		__be16	id;
-		__be16	sequence;
-	} echo;
-	__be32	gateway;
-	struct {
-		__be16	__unused;
-		__be16	mtu;
-	} frag;
-  } un;
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/icmp.h>
 
 static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb)
 {
 	return (struct icmphdr *)skb_transport_header(skb);
 }
-#endif
-
-/*
- *	constants for (set|get)sockopt
- */
-
-#define ICMP_FILTER			1
-
-struct icmp_filter {
-	__u32		data;
-};
-
-
 #endif	/* _LINUX_ICMP_H */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index ba45e6bc0764c84e5d0c4409193c6c4e6aa2ee99..b4f6c29caced9604ec7cc26a127a0ce145a397d2 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -1,174 +1,13 @@
 #ifndef _LINUX_ICMPV6_H
 #define _LINUX_ICMPV6_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-struct icmp6hdr {
-
-	__u8		icmp6_type;
-	__u8		icmp6_code;
-	__sum16		icmp6_cksum;
-
-
-	union {
-		__be32			un_data32[1];
-		__be16			un_data16[2];
-		__u8			un_data8[4];
-
-		struct icmpv6_echo {
-			__be16		identifier;
-			__be16		sequence;
-		} u_echo;
-
-                struct icmpv6_nd_advt {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                        __u32		reserved:5,
-                        		override:1,
-                        		solicited:1,
-                        		router:1,
-					reserved2:24;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                        __u32		router:1,
-					solicited:1,
-                        		override:1,
-                        		reserved:29;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif						
-                } u_nd_advt;
-
-                struct icmpv6_nd_ra {
-			__u8		hop_limit;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-			__u8		reserved:3,
-					router_pref:2,
-					home_agent:1,
-					other:1,
-					managed:1;
-
-#elif defined(__BIG_ENDIAN_BITFIELD)
-			__u8		managed:1,
-					other:1,
-					home_agent:1,
-					router_pref:2,
-					reserved:3;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-			__be16		rt_lifetime;
-                } u_nd_ra;
-
-	} icmp6_dataun;
-
-#define icmp6_identifier	icmp6_dataun.u_echo.identifier
-#define icmp6_sequence		icmp6_dataun.u_echo.sequence
-#define icmp6_pointer		icmp6_dataun.un_data32[0]
-#define icmp6_mtu		icmp6_dataun.un_data32[0]
-#define icmp6_unused		icmp6_dataun.un_data32[0]
-#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
-#define icmp6_router		icmp6_dataun.u_nd_advt.router
-#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
-#define icmp6_override		icmp6_dataun.u_nd_advt.override
-#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
-#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
-#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
-#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
-#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
-#define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/icmpv6.h>
 
 static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb)
 {
 	return (struct icmp6hdr *)skb_transport_header(skb);
 }
-#endif
-
-#define ICMPV6_ROUTER_PREF_LOW		0x3
-#define ICMPV6_ROUTER_PREF_MEDIUM	0x0
-#define ICMPV6_ROUTER_PREF_HIGH		0x1
-#define ICMPV6_ROUTER_PREF_INVALID	0x2
-
-#define ICMPV6_DEST_UNREACH		1
-#define ICMPV6_PKT_TOOBIG		2
-#define ICMPV6_TIME_EXCEED		3
-#define ICMPV6_PARAMPROB		4
-
-#define ICMPV6_INFOMSG_MASK		0x80
-
-#define ICMPV6_ECHO_REQUEST		128
-#define ICMPV6_ECHO_REPLY		129
-#define ICMPV6_MGM_QUERY		130
-#define ICMPV6_MGM_REPORT       	131
-#define ICMPV6_MGM_REDUCTION    	132
-
-#define ICMPV6_NI_QUERY			139
-#define ICMPV6_NI_REPLY			140
-
-#define ICMPV6_MLD2_REPORT		143
-
-#define ICMPV6_DHAAD_REQUEST		144
-#define ICMPV6_DHAAD_REPLY		145
-#define ICMPV6_MOBILE_PREFIX_SOL	146
-#define ICMPV6_MOBILE_PREFIX_ADV	147
-
-/*
- *	Codes for Destination Unreachable
- */
-#define ICMPV6_NOROUTE			0
-#define ICMPV6_ADM_PROHIBITED		1
-#define ICMPV6_NOT_NEIGHBOUR		2
-#define ICMPV6_ADDR_UNREACH		3
-#define ICMPV6_PORT_UNREACH		4
-
-/*
- *	Codes for Time Exceeded
- */
-#define ICMPV6_EXC_HOPLIMIT		0
-#define ICMPV6_EXC_FRAGTIME		1
-
-/*
- *	Codes for Parameter Problem
- */
-#define ICMPV6_HDR_FIELD		0
-#define ICMPV6_UNK_NEXTHDR		1
-#define ICMPV6_UNK_OPTION		2
-
-/*
- *	constants for (set|get)sockopt
- */
-
-#define ICMPV6_FILTER			1
-
-/*
- *	ICMPV6 filter
- */
-
-#define ICMPV6_FILTER_BLOCK		1
-#define ICMPV6_FILTER_PASS		2
-#define ICMPV6_FILTER_BLOCKOTHERS	3
-#define ICMPV6_FILTER_PASSONLY		4
-
-struct icmp6_filter {
-	__u32		data[8];
-};
-
-/*
- *	Definitions for MLDv2
- */
-#define MLD2_MODE_IS_INCLUDE	1
-#define MLD2_MODE_IS_EXCLUDE	2
-#define MLD2_CHANGE_TO_INCLUDE	3
-#define MLD2_CHANGE_TO_EXCLUDE	4
-#define MLD2_ALLOW_NEW_SOURCES	5
-#define MLD2_BLOCK_OLD_SOURCES	6
-
-#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
 
@@ -192,5 +31,3 @@ extern void				icmpv6_flow_init(struct sock *sk,
 							 const struct in6_addr *daddr,
 							 int oif);
 #endif
-
-#endif
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 9adcc29f084af485a8b674dd6c6b3b51532ce68b..89b4614a47220e498b604034090eda7f10963b2c 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -23,140 +23,8 @@
 #ifndef _LINUX_IF_ARP_H
 #define _LINUX_IF_ARP_H
 
-#include <linux/netdevice.h>
-
-/* ARP protocol HARDWARE identifiers. */
-#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
-#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
-#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
-#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
-#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
-#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
-#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
-#define	ARPHRD_ARCNET	7		/* ARCnet			*/
-#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
-#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
-#define ARPHRD_ATM	19		/* ATM 				*/
-#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
-#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
-#define ARPHRD_EUI64	27		/* EUI-64                       */
-#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
-
-/* Dummy types for non ARP hardware */
-#define ARPHRD_SLIP	256
-#define ARPHRD_CSLIP	257
-#define ARPHRD_SLIP6	258
-#define ARPHRD_CSLIP6	259
-#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
-#define ARPHRD_ADAPT	264
-#define ARPHRD_ROSE	270
-#define ARPHRD_X25	271		/* CCITT X.25			*/
-#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
-#define ARPHRD_CAN	280		/* Controller Area Network      */
-#define ARPHRD_PPP	512
-#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
-#define ARPHRD_HDLC	ARPHRD_CISCO
-#define ARPHRD_LAPB	516		/* LAPB				*/
-#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
-#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
-
-#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
-#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
-#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
-#define ARPHRD_SKIP	771		/* SKIP vif			*/
-#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
-#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
-#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
-#define ARPHRD_BIF      775             /* AP1000 BIF                   */
-#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
-#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
-#define ARPHRD_IPGRE	778		/* GRE over IP			*/
-#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
-#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
-#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
-#define ARPHRD_ECONET	782		/* Acorn Econet			*/
-#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
-/* ARP works differently on different FC media .. so  */
-#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
-#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
-#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
-#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
-	/* 787->799 reserved for fibrechannel media types */
-#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
-#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
-#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
-#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
-#define ARPHRD_IEEE802154	  804
-#define ARPHRD_IEEE802154_MONITOR 805	/* IEEE 802.15.4 network monitor */
-
-#define ARPHRD_PHONET	820		/* PhoNet media type		*/
-#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
-#define ARPHRD_CAIF	822		/* CAIF media type		*/
-#define ARPHRD_IP6GRE	823		/* GRE over IPv6		*/
-
-#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
-#define ARPHRD_NONE	  0xFFFE	/* zero header length */
-
-/* ARP protocol opcodes. */
-#define	ARPOP_REQUEST	1		/* ARP request			*/
-#define	ARPOP_REPLY	2		/* ARP reply			*/
-#define	ARPOP_RREQUEST	3		/* RARP request			*/
-#define	ARPOP_RREPLY	4		/* RARP reply			*/
-#define	ARPOP_InREQUEST	8		/* InARP request		*/
-#define	ARPOP_InREPLY	9		/* InARP reply			*/
-#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
-
-
-/* ARP ioctl request. */
-struct arpreq {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-  char			arp_dev[16];
-};
-
-struct arpreq_old {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-};
-
-/* ARP Flag values. */
-#define ATF_COM		0x02		/* completed entry (ha valid)	*/
-#define	ATF_PERM	0x04		/* permanent entry		*/
-#define	ATF_PUBL	0x08		/* publish entry		*/
-#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
-#define ATF_NETMASK     0x20            /* want to use a netmask (only
-					   for proxy entries) */
-#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
-
-/*
- *	This structure defines an ethernet arp header.
- */
-
-struct arphdr {
-	__be16		ar_hrd;		/* format of hardware address	*/
-	__be16		ar_pro;		/* format of protocol address	*/
-	unsigned char	ar_hln;		/* length of hardware address	*/
-	unsigned char	ar_pln;		/* length of protocol address	*/
-	__be16		ar_op;		/* ARP opcode (command)		*/
-
-#if 0
-	 /*
-	  *	 Ethernet looks like this : This bit is variable sized however...
-	  */
-	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
-	unsigned char		ar_sip[4];		/* sender IP address		*/
-	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
-	unsigned char		ar_tip[4];		/* target IP address		*/
-#endif
-
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_arp.h>
 
 static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
 {
@@ -168,6 +36,4 @@ static inline int arp_hdr_len(struct net_device *dev)
 	/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
 	return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
 }
-#endif
-
 #endif	/* _LINUX_IF_ARP_H */
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index dd3f201396407dc7f4cac0c15452278c850ba261..1085ffeef956589d77dea0a426feedf6450fd20f 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -9,97 +9,12 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_BRIDGE_H
 #define _LINUX_IF_BRIDGE_H
 
-#include <linux/types.h>
-
-#define SYSFS_BRIDGE_ATTR	"bridge"
-#define SYSFS_BRIDGE_FDB	"brforward"
-#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
-#define SYSFS_BRIDGE_PORT_ATTR	"brport"
-#define SYSFS_BRIDGE_PORT_LINK	"bridge"
-
-#define BRCTL_VERSION 1
-
-#define BRCTL_GET_VERSION 0
-#define BRCTL_GET_BRIDGES 1
-#define BRCTL_ADD_BRIDGE 2
-#define BRCTL_DEL_BRIDGE 3
-#define BRCTL_ADD_IF 4
-#define BRCTL_DEL_IF 5
-#define BRCTL_GET_BRIDGE_INFO 6
-#define BRCTL_GET_PORT_LIST 7
-#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
-#define BRCTL_SET_BRIDGE_HELLO_TIME 9
-#define BRCTL_SET_BRIDGE_MAX_AGE 10
-#define BRCTL_SET_AGEING_TIME 11
-#define BRCTL_SET_GC_INTERVAL 12
-#define BRCTL_GET_PORT_INFO 13
-#define BRCTL_SET_BRIDGE_STP_STATE 14
-#define BRCTL_SET_BRIDGE_PRIORITY 15
-#define BRCTL_SET_PORT_PRIORITY 16
-#define BRCTL_SET_PATH_COST 17
-#define BRCTL_GET_FDB_ENTRIES 18
-
-#define BR_STATE_DISABLED 0
-#define BR_STATE_LISTENING 1
-#define BR_STATE_LEARNING 2
-#define BR_STATE_FORWARDING 3
-#define BR_STATE_BLOCKING 4
-
-struct __bridge_info {
-	__u64 designated_root;
-	__u64 bridge_id;
-	__u32 root_path_cost;
-	__u32 max_age;
-	__u32 hello_time;
-	__u32 forward_delay;
-	__u32 bridge_max_age;
-	__u32 bridge_hello_time;
-	__u32 bridge_forward_delay;
-	__u8 topology_change;
-	__u8 topology_change_detected;
-	__u8 root_port;
-	__u8 stp_enabled;
-	__u32 ageing_time;
-	__u32 gc_interval;
-	__u32 hello_timer_value;
-	__u32 tcn_timer_value;
-	__u32 topology_change_timer_value;
-	__u32 gc_timer_value;
-};
-
-struct __port_info {
-	__u64 designated_root;
-	__u64 designated_bridge;
-	__u16 port_id;
-	__u16 designated_port;
-	__u32 path_cost;
-	__u32 designated_cost;
-	__u8 state;
-	__u8 top_change_ack;
-	__u8 config_pending;
-	__u8 unused0;
-	__u32 message_age_timer_value;
-	__u32 forward_delay_timer_value;
-	__u32 hold_timer_value;
-};
-
-struct __fdb_entry {
-	__u8 mac_addr[6];
-	__u8 port_no;
-	__u8 is_local;
-	__u32 ageing_timer_value;
-	__u8 port_hi;
-	__u8 pad0;
-	__u16 unused;
-};
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
+#include <uapi/linux/if_bridge.h>
 
 extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
 
@@ -107,5 +22,3 @@ typedef int br_should_route_hook_t(struct sk_buff *skb);
 extern br_should_route_hook_t __rcu *br_should_route_hook;
 
 #endif
-
-#endif
diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h
index 18a5d02a864410df6b6eba5f8f6a67650150cacc..d984694c384d7dde37b7b1f9ac0a90e6ef7bb87f 100644
--- a/include/linux/if_eql.h
+++ b/include/linux/if_eql.h
@@ -15,28 +15,13 @@
  *    McLean VA 22101
  *    Phone: 1-703-847-0040 ext 103
  */
-
 #ifndef _LINUX_IF_EQL_H
 #define _LINUX_IF_EQL_H
 
-#define EQL_DEFAULT_SLAVE_PRIORITY 28800
-#define EQL_DEFAULT_MAX_SLAVES     4
-#define EQL_DEFAULT_MTU            576
-#define EQL_DEFAULT_RESCHED_IVAL   HZ
-
-#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
-#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
-
-#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
-#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
-
-#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
-#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
-
-#ifdef __KERNEL__
 
 #include <linux/timer.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/if_eql.h>
 
 typedef struct slave {
 	struct list_head	list;
@@ -61,23 +46,4 @@ typedef struct equalizer {
 	struct timer_list	timer;
 } equalizer_t;  
 
-#endif /* __KERNEL__ */
-
-typedef struct master_config {
-	char	master_name[16];
-	int	max_slaves;
-	int	min_slaves;
-} master_config_t;
-
-typedef struct slave_config {
-	char	slave_name[16];
-	long	priority;
-} slave_config_t;
-
-typedef struct slaving_request {
-	char	slave_name[16];
-	long	priority;
-} slaving_request_t;
-
-
 #endif /* _LINUX_EQL_H */
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 167ce5b363d2731aa4e5b82600164fb9ef52b245..12b4d55a02af195674e5369c0b35d7b37258d9f5 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -17,122 +17,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_ETHER_H
 #define _LINUX_IF_ETHER_H
 
-#include <linux/types.h>
-
-/*
- *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
-#define ETH_HLEN	14		/* Total octets in header.	 */
-#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
-#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
-#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
-
-/*
- *	These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
-#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
-#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
-#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-#define ETH_P_X25	0x0805		/* CCITT X.25			*/
-#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
-#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
-#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
-#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
-#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
-#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
-#define ETH_P_LAT       0x6004          /* DEC LAT                      */
-#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
-#define ETH_P_CUST      0x6006          /* DEC Customer use             */
-#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
-#define ETH_P_TEB	0x6558		/* Trans Ether Bridging		*/
-#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
-#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
-#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
-#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
-#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
-#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
-#define ETH_P_PAUSE	0x8808		/* IEEE Pause frames. See 802.3 31B */
-#define ETH_P_SLOW	0x8809		/* Slow Protocol. See 802.3ad 43B */
-#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
-					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
-#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
-#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
-#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
-#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
-#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
-#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
-#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
-					 * over Ethernet
-					 */
-#define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
-#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
-#define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
-#define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
-#define ETH_P_TIPC	0x88CA		/* TIPC 			*/
-#define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
-#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
-#define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
-#define ETH_P_TDLS	0x890D          /* TDLS */
-#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
-#define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
-
-/*
- *	Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
-#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
-#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
-#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
-#define ETH_P_SNAP	0x0005		/* Internal only		*/
-#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
-#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
-#define ETH_P_CAN	0x000C		/* CAN: Controller Area Network */
-#define ETH_P_CANFD	0x000D		/* CANFD: CAN flexible data rate*/
-#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
-#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
-#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
-#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
-#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
-#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
-#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
-#define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
-#define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
-#define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
-#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
-#define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
-
-/*
- *	This is an Ethernet frame header.
- */
-
-struct ethhdr {
-	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
-	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
-	__be16		h_proto;		/* packet type ID field	*/
-} __attribute__((packed));
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_ether.h>
 
 static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
 {
@@ -144,6 +33,4 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
 int mac_pton(const char *s, u8 *mac);
 extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
 
-#endif
-
 #endif	/* _LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
index e6dc11e7f9a54613f3700af8fe9d6557d8bd6135..f5550b3eeeab4b8f39bae85b80fbc8d132db33da 100644
--- a/include/linux/if_fddi.h
+++ b/include/linux/if_fddi.h
@@ -24,84 +24,8 @@
 #ifndef _LINUX_IF_FDDI_H
 #define _LINUX_IF_FDDI_H
 
-#include <linux/types.h>
-
-/*
- *  Define max and min legal sizes.  The frame sizes do not include
- *  4 byte FCS/CRC (frame check sequence).
- */
-#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
-#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
-#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
-#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
-#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
-#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
-#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
-#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
-#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
-
-/* Define FDDI Frame Control (FC) Byte values */
-#define FDDI_FC_K_VOID					0x00	
-#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
-#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
-#define FDDI_FC_K_SMT_MIN				0x41
-#define FDDI_FC_K_SMT_MAX		   		0x4F
-#define FDDI_FC_K_MAC_MIN				0xC1
-#define FDDI_FC_K_MAC_MAX		  		0xCF	
-#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
-#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
-#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
-#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
-#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
-#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
-#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
-#define FDDI_FC_K_RESERVED_MIN			0x70
-#define FDDI_FC_K_RESERVED_MAX			0x7F
-
-/* Define LLC and SNAP constants */
-#define FDDI_EXTENDED_SAP	0xAA
-#define FDDI_UI_CMD			0x03
-
-/* Define 802.2 Type 1 header */
-struct fddi_8022_1_hdr {
-	__u8	dsap;					/* destination service access point */
-	__u8	ssap;					/* source service access point */
-	__u8	ctrl;					/* control byte #1 */
-} __attribute__((packed));
-
-/* Define 802.2 Type 2 header */
-struct fddi_8022_2_hdr {
-	__u8	dsap;					/* destination service access point */
-	__u8	ssap;					/* source service access point */
-	__u8	ctrl_1;					/* control byte #1 */
-	__u8	ctrl_2;					/* control byte #2 */
-} __attribute__((packed));
-
-/* Define 802.2 SNAP header */
-#define FDDI_K_OUI_LEN	3
-struct fddi_snap_hdr {
-	__u8	dsap;					/* always 0xAA */
-	__u8	ssap;					/* always 0xAA */
-	__u8	ctrl;					/* always 0x03 */
-	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
-	__be16	ethertype;				/* packet type ID field */
-} __attribute__((packed));
-
-/* Define FDDI LLC frame header */
-struct fddihdr {
-	__u8	fc;						/* frame control */
-	__u8	daddr[FDDI_K_ALEN];		/* destination address */
-	__u8	saddr[FDDI_K_ALEN];		/* source address */
-	union
-		{
-		struct fddi_8022_1_hdr		llc_8022_1;
-		struct fddi_8022_2_hdr		llc_8022_2;
-		struct fddi_snap_hdr		llc_snap;
-		} hdr;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
 #include <linux/netdevice.h>
+#include <uapi/linux/if_fddi.h>
 
 /* Define FDDI statistics structure */
 struct fddi_statistics {
@@ -194,6 +118,4 @@ struct fddi_statistics {
 	__u32	port_ler_flag[2];
 	__u32	port_hardware_present[2];
 };
-#endif /* __KERNEL__ */
-
 #endif	/* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 191ee0869bc16d7f1df9c42e2b8e4b881c17cd28..4316aa173dde363f136a082ef453ced40d65ae4e 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -20,105 +20,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef _FRAD_H_
 #define _FRAD_H_
 
-#include <linux/if.h>
-
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
-   char  devname[IFNAMSIZ];
-   short dlci;
-};
-
-#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
-
-/* 
- * These are related to the Sangoma SDLA and should remain in order. 
- * Code within the SDLA module is based on the specifics of this 
- * structure.  Change at your own peril.
- */
-struct dlci_conf {
-   short flags;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-
-/* these are part of the status read */
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT	0x0001
-#define DLCI_ACCOUNT_CIR_IN	0x0002
-#define DLCI_BUFFER_IF		0x0008
-
-#define DLCI_VALID_FLAGS	0x000B
+#include <uapi/linux/if_frad.h>
 
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
-#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL	FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA.  If changes are 
- * necessary to this structure, a routine will need to be 
- * added to that module to copy fields.
- */
-struct frad_conf 
-{
-   short station;
-   short flags;
-   short kbaud;
-   short clocking;
-   short mtu;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE	0x0000
-#define FRAD_STATION_NODE	0x0001
-
-#define FRAD_TX_IGNORE_CIR	0x0001
-#define FRAD_RX_ACCOUNT_CIR	0x0002
-#define FRAD_DROP_ABORTED	0x0004
-#define FRAD_BUFFERIF		0x0008
-#define FRAD_STATS		0x0010
-#define FRAD_MCI		0x0100
-#define FRAD_AUTODLCI		0x8000
-#define FRAD_VALID_FLAGS	0x811F
-
-#define FRAD_CLOCK_INT		0x0001
-#define FRAD_CLOCK_EXT		0x0000
-
-#ifdef __KERNEL__
 
 #if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
 
@@ -188,6 +94,4 @@ struct frad_local
 
 extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 3265f332998a54c9722fd2d6825aa63f60f3aba2..c3f817c3eb451091e5b02fc6c8f22e7af5d1126a 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -1,341 +1,8 @@
 #ifndef _LINUX_IF_LINK_H
 #define _LINUX_IF_LINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/if_link.h>
 
-/* This struct should be in sync with struct rtnl_link_stats64 */
-struct rtnl_link_stats {
-	__u32	rx_packets;		/* total packets received	*/
-	__u32	tx_packets;		/* total packets transmitted	*/
-	__u32	rx_bytes;		/* total bytes received 	*/
-	__u32	tx_bytes;		/* total bytes transmitted	*/
-	__u32	rx_errors;		/* bad packets received		*/
-	__u32	tx_errors;		/* packet transmit problems	*/
-	__u32	rx_dropped;		/* no space in linux buffers	*/
-	__u32	tx_dropped;		/* no space available in linux	*/
-	__u32	multicast;		/* multicast packets received	*/
-	__u32	collisions;
-
-	/* detailed rx_errors: */
-	__u32	rx_length_errors;
-	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
-	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
-	__u32	rx_frame_errors;	/* recv'd frame alignment error */
-	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	__u32	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	__u32	tx_aborted_errors;
-	__u32	tx_carrier_errors;
-	__u32	tx_fifo_errors;
-	__u32	tx_heartbeat_errors;
-	__u32	tx_window_errors;
-
-	/* for cslip etc */
-	__u32	rx_compressed;
-	__u32	tx_compressed;
-};
-
-/* The main device statistics structure */
-struct rtnl_link_stats64 {
-	__u64	rx_packets;		/* total packets received	*/
-	__u64	tx_packets;		/* total packets transmitted	*/
-	__u64	rx_bytes;		/* total bytes received 	*/
-	__u64	tx_bytes;		/* total bytes transmitted	*/
-	__u64	rx_errors;		/* bad packets received		*/
-	__u64	tx_errors;		/* packet transmit problems	*/
-	__u64	rx_dropped;		/* no space in linux buffers	*/
-	__u64	tx_dropped;		/* no space available in linux	*/
-	__u64	multicast;		/* multicast packets received	*/
-	__u64	collisions;
-
-	/* detailed rx_errors: */
-	__u64	rx_length_errors;
-	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
-	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
-	__u64	rx_frame_errors;	/* recv'd frame alignment error */
-	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	__u64	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	__u64	tx_aborted_errors;
-	__u64	tx_carrier_errors;
-	__u64	tx_fifo_errors;
-	__u64	tx_heartbeat_errors;
-	__u64	tx_window_errors;
-
-	/* for cslip etc */
-	__u64	rx_compressed;
-	__u64	tx_compressed;
-};
-
-/* The struct should be in sync with struct ifmap */
-struct rtnl_link_ifmap {
-	__u64	mem_start;
-	__u64	mem_end;
-	__u64	base_addr;
-	__u16	irq;
-	__u8	dma;
-	__u8	port;
-};
-
-/*
- * IFLA_AF_SPEC
- *   Contains nested attributes for address family specific attributes.
- *   Each address family may create a attribute with the address family
- *   number as type and create its own attribute structure in it.
- *
- *   Example:
- *   [IFLA_AF_SPEC] = {
- *       [AF_INET] = {
- *           [IFLA_INET_CONF] = ...,
- *       },
- *       [AF_INET6] = {
- *           [IFLA_INET6_FLAGS] = ...,
- *           [IFLA_INET6_CONF] = ...,
- *       }
- *   }
- */
-
-enum {
-	IFLA_UNSPEC,
-	IFLA_ADDRESS,
-	IFLA_BROADCAST,
-	IFLA_IFNAME,
-	IFLA_MTU,
-	IFLA_LINK,
-	IFLA_QDISC,
-	IFLA_STATS,
-	IFLA_COST,
-#define IFLA_COST IFLA_COST
-	IFLA_PRIORITY,
-#define IFLA_PRIORITY IFLA_PRIORITY
-	IFLA_MASTER,
-#define IFLA_MASTER IFLA_MASTER
-	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
-#define IFLA_WIRELESS IFLA_WIRELESS
-	IFLA_PROTINFO,		/* Protocol specific information for a link */
-#define IFLA_PROTINFO IFLA_PROTINFO
-	IFLA_TXQLEN,
-#define IFLA_TXQLEN IFLA_TXQLEN
-	IFLA_MAP,
-#define IFLA_MAP IFLA_MAP
-	IFLA_WEIGHT,
-#define IFLA_WEIGHT IFLA_WEIGHT
-	IFLA_OPERSTATE,
-	IFLA_LINKMODE,
-	IFLA_LINKINFO,
-#define IFLA_LINKINFO IFLA_LINKINFO
-	IFLA_NET_NS_PID,
-	IFLA_IFALIAS,
-	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
-	IFLA_VFINFO_LIST,
-	IFLA_STATS64,
-	IFLA_VF_PORTS,
-	IFLA_PORT_SELF,
-	IFLA_AF_SPEC,
-	IFLA_GROUP,		/* Group the device belongs to */
-	IFLA_NET_NS_FD,
-	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
-	IFLA_PROMISCUITY,	/* Promiscuity count: > 0 means acts PROMISC */
-#define IFLA_PROMISCUITY IFLA_PROMISCUITY
-	IFLA_NUM_TX_QUEUES,
-	IFLA_NUM_RX_QUEUES,
-	__IFLA_MAX
-};
-
-
-#define IFLA_MAX (__IFLA_MAX - 1)
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
-#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
-#endif
-
-enum {
-	IFLA_INET_UNSPEC,
-	IFLA_INET_CONF,
-	__IFLA_INET_MAX,
-};
-
-#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
-
-/* ifi_flags.
-
-   IFF_* flags.
-
-   The only change is:
-   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
-   more not changeable by user. They describe link media
-   characteristics and set by device driver.
-
-   Comments:
-   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
-   - If neither of these three flags are set;
-     the interface is NBMA.
-
-   - IFF_MULTICAST does not mean anything special:
-   multicasts can be used on all not-NBMA links.
-   IFF_MULTICAST means that this media uses special encapsulation
-   for multicast frames. Apparently, all IFF_POINTOPOINT and
-   IFF_BROADCAST devices are able to use multicasts too.
- */
-
-/* IFLA_LINK.
-   For usual devices it is equal ifi_index.
-   If it is a "virtual interface" (f.e. tunnel), ifi_link
-   can point to real physical interface (f.e. for bandwidth calculations),
-   or maybe 0, what means, that real media is unknown (usual
-   for IPIP tunnels, when route to endpoint is allowed to change)
- */
-
-/* Subtype attributes for IFLA_PROTINFO */
-enum {
-	IFLA_INET6_UNSPEC,
-	IFLA_INET6_FLAGS,	/* link flags			*/
-	IFLA_INET6_CONF,	/* sysctl parameters		*/
-	IFLA_INET6_STATS,	/* statistics			*/
-	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
-	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
-	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
-	__IFLA_INET6_MAX
-};
-
-#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
-
-struct ifla_cacheinfo {
-	__u32	max_reasm_len;
-	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
-	__u32	reachable_time;
-	__u32	retrans_time;
-};
-
-enum {
-	IFLA_INFO_UNSPEC,
-	IFLA_INFO_KIND,
-	IFLA_INFO_DATA,
-	IFLA_INFO_XSTATS,
-	__IFLA_INFO_MAX,
-};
-
-#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
-
-/* VLAN section */
-
-enum {
-	IFLA_VLAN_UNSPEC,
-	IFLA_VLAN_ID,
-	IFLA_VLAN_FLAGS,
-	IFLA_VLAN_EGRESS_QOS,
-	IFLA_VLAN_INGRESS_QOS,
-	__IFLA_VLAN_MAX,
-};
-
-#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
-
-struct ifla_vlan_flags {
-	__u32	flags;
-	__u32	mask;
-};
-
-enum {
-	IFLA_VLAN_QOS_UNSPEC,
-	IFLA_VLAN_QOS_MAPPING,
-	__IFLA_VLAN_QOS_MAX
-};
-
-#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
-
-struct ifla_vlan_qos_mapping {
-	__u32 from;
-	__u32 to;
-};
-
-/* MACVLAN section */
-enum {
-	IFLA_MACVLAN_UNSPEC,
-	IFLA_MACVLAN_MODE,
-	IFLA_MACVLAN_FLAGS,
-	__IFLA_MACVLAN_MAX,
-};
-
-#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
-
-enum macvlan_mode {
-	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
-	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
-	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
-	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
-};
-
-#define MACVLAN_FLAG_NOPROMISC	1
-
-/* VXLAN section */
-enum {
-	IFLA_VXLAN_UNSPEC,
-	IFLA_VXLAN_ID,
-	IFLA_VXLAN_GROUP,
-	IFLA_VXLAN_LINK,
-	IFLA_VXLAN_LOCAL,
-	IFLA_VXLAN_TTL,
-	IFLA_VXLAN_TOS,
-	IFLA_VXLAN_LEARNING,
-	IFLA_VXLAN_AGEING,
-	IFLA_VXLAN_LIMIT,
-	IFLA_VXLAN_PORT_RANGE,
-	__IFLA_VXLAN_MAX
-};
-#define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
-
-struct ifla_vxlan_port_range {
-	__be16	low;
-	__be16	high;
-};
-
-/* SR-IOV virtual function management section */
-
-enum {
-	IFLA_VF_INFO_UNSPEC,
-	IFLA_VF_INFO,
-	__IFLA_VF_INFO_MAX,
-};
-
-#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
-
-enum {
-	IFLA_VF_UNSPEC,
-	IFLA_VF_MAC,		/* Hardware queue specific attributes */
-	IFLA_VF_VLAN,
-	IFLA_VF_TX_RATE,	/* TX Bandwidth Allocation */
-	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
-	__IFLA_VF_MAX,
-};
-
-#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
-
-struct ifla_vf_mac {
-	__u32 vf;
-	__u8 mac[32]; /* MAX_ADDR_LEN */
-};
-
-struct ifla_vf_vlan {
-	__u32 vf;
-	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
-	__u32 qos;
-};
-
-struct ifla_vf_tx_rate {
-	__u32 vf;
-	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
-};
-
-struct ifla_vf_spoofchk {
-	__u32 vf;
-	__u32 setting;
-};
-#ifdef __KERNEL__
 
 /* We don't want this structure exposed to user space */
 struct ifla_vf_info {
@@ -346,96 +13,4 @@ struct ifla_vf_info {
 	__u32 tx_rate;
 	__u32 spoofchk;
 };
-#endif
-
-/* VF ports management section
- *
- *	Nested layout of set/get msg is:
- *
- *		[IFLA_NUM_VF]
- *		[IFLA_VF_PORTS]
- *			[IFLA_VF_PORT]
- *				[IFLA_PORT_*], ...
- *			[IFLA_VF_PORT]
- *				[IFLA_PORT_*], ...
- *			...
- *		[IFLA_PORT_SELF]
- *			[IFLA_PORT_*], ...
- */
-
-enum {
-	IFLA_VF_PORT_UNSPEC,
-	IFLA_VF_PORT,			/* nest */
-	__IFLA_VF_PORT_MAX,
-};
-
-#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
-
-enum {
-	IFLA_PORT_UNSPEC,
-	IFLA_PORT_VF,			/* __u32 */
-	IFLA_PORT_PROFILE,		/* string */
-	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
-	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
-	IFLA_PORT_HOST_UUID,		/* binary UUID */
-	IFLA_PORT_REQUEST,		/* __u8 */
-	IFLA_PORT_RESPONSE,		/* __u16, output only */
-	__IFLA_PORT_MAX,
-};
-
-#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
-
-#define PORT_PROFILE_MAX	40
-#define PORT_UUID_MAX		16
-#define PORT_SELF_VF		-1
-
-enum {
-	PORT_REQUEST_PREASSOCIATE = 0,
-	PORT_REQUEST_PREASSOCIATE_RR,
-	PORT_REQUEST_ASSOCIATE,
-	PORT_REQUEST_DISASSOCIATE,
-};
-
-enum {
-	PORT_VDP_RESPONSE_SUCCESS = 0,
-	PORT_VDP_RESPONSE_INVALID_FORMAT,
-	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
-	PORT_VDP_RESPONSE_UNUSED_VTID,
-	PORT_VDP_RESPONSE_VTID_VIOLATION,
-	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
-	PORT_VDP_RESPONSE_OUT_OF_SYNC,
-	/* 0x08-0xFF reserved for future VDP use */
-	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
-	PORT_PROFILE_RESPONSE_INPROGRESS,
-	PORT_PROFILE_RESPONSE_INVALID,
-	PORT_PROFILE_RESPONSE_BADSTATE,
-	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
-	PORT_PROFILE_RESPONSE_ERROR,
-};
-
-struct ifla_port_vsi {
-	__u8 vsi_mgr_id;
-	__u8 vsi_type_id[3];
-	__u8 vsi_type_version;
-	__u8 pad[3];
-};
-
-
-/* IPoIB section */
-
-enum {
-	IFLA_IPOIB_UNSPEC,
-	IFLA_IPOIB_PKEY,
-	IFLA_IPOIB_MODE,
-	IFLA_IPOIB_UMCAST,
-	__IFLA_IPOIB_MAX
-};
-
-enum {
-	IPOIB_MODE_DATAGRAM  = 0, /* using unreliable datagram QPs */
-	IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
-};
-
-#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
-
 #endif /* _LINUX_IF_LINK_H */
diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h
index 76525760ba48398550dc856ec90c9a2ca55a05a7..81e434c50790f302213e3ce23b8447e9cb30a8b2 100644
--- a/include/linux/if_ltalk.h
+++ b/include/linux/if_ltalk.h
@@ -1,12 +1,7 @@
 #ifndef __LINUX_LTALK_H
 #define __LINUX_LTALK_H
 
-#define LTALK_HLEN		1
-#define LTALK_MTU		600
-#define LTALK_ALEN		1
+#include <uapi/linux/if_ltalk.h>
 
-#ifdef __KERNEL__
 extern struct net_device *alloc_ltalkdev(int sizeof_priv);
 #endif
-
-#endif
diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h
index d70034bcec059800d9d972a6d37096b38cb4809c..bbcdb0a767d87de802237b503a75716f99a3b0aa 100644
--- a/include/linux/if_phonet.h
+++ b/include/linux/if_phonet.h
@@ -8,12 +8,7 @@
 #ifndef LINUX_IF_PHONET_H
 #define LINUX_IF_PHONET_H
 
-#define PHONET_MIN_MTU		6	/* pn_length = 0 */
-#define PHONET_MAX_MTU		65541	/* pn_length = 0xffff */
-#define PHONET_DEV_MTU		PHONET_MAX_MTU
+#include <uapi/linux/if_phonet.h>
 
-#ifdef __KERNEL__
 extern struct header_ops phonet_header_ops;
 #endif
-
-#endif
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index b4775418d525cdf04f9ac4b7250c2f2b50755503..0fb71e532b2c680388a4dfbeb11171bad96fe4a3 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -11,98 +11,11 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef __LINUX_IF_PPPOL2TP_H
 #define __LINUX_IF_PPPOL2TP_H
 
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 #include <linux/in.h>
 #include <linux/in6.h>
-#endif
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv4.
- */
-struct pppol2tp_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP socket to use */
-
-	struct sockaddr_in addr;	/* IP address and port to send to */
-
-	__u16 s_tunnel, s_session;	/* For matching incoming packets */
-	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
-};
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv6.
- */
-struct pppol2tpin6_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP socket to use */
-
-	__u16 s_tunnel, s_session;	/* For matching incoming packets */
-	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
-
-	struct sockaddr_in6 addr;	/* IP address and port to send to */
-};
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct pppol2tpv3_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP or IP socket to use */
-
-	struct sockaddr_in addr;	/* IP address and port to send to */
-
-	__u32 s_tunnel, s_session;	/* For matching incoming packets */
-	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
-};
-
-struct pppol2tpv3in6_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP or IP socket to use */
-
-	__u32 s_tunnel, s_session;	/* For matching incoming packets */
-	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
-
-	struct sockaddr_in6 addr;	/* IP address and port to send to */
-};
-
-/* Socket options:
- * DEBUG	- bitmask of debug message categories
- * SENDSEQ	- 0 => don't send packets with sequence numbers
- *		  1 => send packets with sequence numbers
- * RECVSEQ	- 0 => receive packet sequence numbers are optional
- *		  1 => drop receive packets without sequence numbers
- * LNSMODE	- 0 => act as LAC.
- *		  1 => act as LNS.
- * REORDERTO	- reorder timeout (in millisecs). If 0, don't try to reorder.
- */
-enum {
-	PPPOL2TP_SO_DEBUG	= 1,
-	PPPOL2TP_SO_RECVSEQ	= 2,
-	PPPOL2TP_SO_SENDSEQ	= 3,
-	PPPOL2TP_SO_LNSMODE	= 4,
-	PPPOL2TP_SO_REORDERTO	= 5,
-};
-
-/* Debug message categories for the DEBUG socket option */
-enum {
-	PPPOL2TP_MSG_DEBUG	= (1 << 0),	/* verbose debug (if
-						 * compiled in) */
-	PPPOL2TP_MSG_CONTROL	= (1 << 1),	/* userspace - kernel
-						 * interface */
-	PPPOL2TP_MSG_SEQ	= (1 << 2),	/* sequence numbers */
-	PPPOL2TP_MSG_DATA	= (1 << 3),	/* data packets */
-};
-
-
+#include <uapi/linux/if_pppol2tp.h>
 
 #endif
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 09c474c480cd2429330b0d08971f863e44b749fe..aff7ad8a4ea3cdea45daca2049a7b83dc8151cc3 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -12,153 +12,14 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef __LINUX_IF_PPPOX_H
 #define __LINUX_IF_PPPOX_H
 
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#include <linux/socket.h>
-#include <linux/if_ether.h>
-#ifdef  __KERNEL__
 #include <linux/if.h>
 #include <linux/netdevice.h>
 #include <linux/ppp_channel.h>
-#endif /* __KERNEL__ */
-#include <linux/if_pppol2tp.h>
-
-/* For user-space programs to pick up these definitions
- * which they wouldn't get otherwise without defining __KERNEL__
- */
-#ifndef AF_PPPOX
-#define AF_PPPOX	24
-#define PF_PPPOX	AF_PPPOX
-#endif /* !(AF_PPPOX) */
-
-/************************************************************************ 
- * PPPoE addressing definition 
- */ 
-typedef __be16 sid_t;
-struct pppoe_addr {
-	sid_t         sid;                    /* Session identifier */
-	unsigned char remote[ETH_ALEN];       /* Remote address */
-	char          dev[IFNAMSIZ];          /* Local device to use */
-}; 
- 
-/************************************************************************ 
- * PPTP addressing definition
- */
-struct pptp_addr {
-	__be16		call_id;
-	struct in_addr	sin_addr;
-};
-
-/************************************************************************
- * Protocols supported by AF_PPPOX
- */
-#define PX_PROTO_OE    0 /* Currently just PPPoE */
-#define PX_PROTO_OL2TP 1 /* Now L2TP also */
-#define PX_PROTO_PPTP  2
-#define PX_MAX_PROTO   3
-
-struct sockaddr_pppox {
-	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;          /* protocol identifier */
-	union {
-		struct pppoe_addr  pppoe;
-		struct pptp_addr   pptp;
-	} sa_addr;
-} __packed;
-
-/* The use of the above union isn't viable because the size of this
- * struct must stay fixed over time -- applications use sizeof(struct
- * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
- * type instead.
- */
-struct sockaddr_pppol2tp {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tp_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpin6 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpin6_addr pppol2tp;
-} __packed;
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct sockaddr_pppol2tpv3 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpv3_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpv3in6 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpv3in6_addr pppol2tp;
-} __packed;
-
-/*********************************************************************
- *
- * ioctl interface for defining forwarding of connections
- *
- ********************************************************************/
-
-#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
-#define PPPOEIOCDFWD	_IO(0xB1 ,1)
-/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
-
-/* Codes to identify message types */
-#define PADI_CODE	0x09
-#define PADO_CODE	0x07
-#define PADR_CODE	0x19
-#define PADS_CODE	0x65
-#define PADT_CODE	0xa7
-struct pppoe_tag {
-	__be16 tag_type;
-	__be16 tag_len;
-	char tag_data[0];
-} __attribute__ ((packed));
-
-/* Tag identifiers */
-#define PTT_EOL		__cpu_to_be16(0x0000)
-#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
-#define PTT_AC_NAME	__cpu_to_be16(0x0102)
-#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
-#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
-#define PTT_VENDOR 	__cpu_to_be16(0x0105)
-#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
-#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
-#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
-#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
-
-struct pppoe_hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 ver : 4;
-	__u8 type : 4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 type : 4;
-	__u8 ver : 4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8 code;
-	__be16 sid;
-	__be16 length;
-	struct pppoe_tag tag[0];
-} __packed;
-
-/* Length of entire PPPoE + PPP header */
-#define PPPOE_SES_HLEN	8
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_pppox.h>
 
 static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
 {
@@ -232,6 +93,4 @@ enum {
     PPPOX_DEAD		= 16  /* dead, useless, please clean me up!*/
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* !(__LINUX_IF_PPPOX_H) */
diff --git a/include/linux/if_team.h b/include/linux/if_team.h
index 6d88a7f576808cbd743ca1c4ad42d2cb5b6ba8cd..0245def2aa9394a8c2fd2dcd70ada65d07e78de4 100644
--- a/include/linux/if_team.h
+++ b/include/linux/if_team.h
@@ -7,14 +7,13 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_TEAM_H_
 #define _LINUX_IF_TEAM_H_
 
-#ifdef __KERNEL__
 
 #include <linux/netpoll.h>
 #include <net/sch_generic.h>
+#include <uapi/linux/if_team.h>
 
 struct team_pcpu_stats {
 	u64			rx_packets;
@@ -251,98 +250,4 @@ extern void team_mode_unregister(const struct team_mode *mode);
 #define TEAM_DEFAULT_NUM_TX_QUEUES 16
 #define TEAM_DEFAULT_NUM_RX_QUEUES 16
 
-#endif /* __KERNEL__ */
-
-#define TEAM_STRING_MAX_LEN 32
-
-/**********************************
- * NETLINK_GENERIC netlink family.
- **********************************/
-
-enum {
-	TEAM_CMD_NOOP,
-	TEAM_CMD_OPTIONS_SET,
-	TEAM_CMD_OPTIONS_GET,
-	TEAM_CMD_PORT_LIST_GET,
-
-	__TEAM_CMD_MAX,
-	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
-};
-
-enum {
-	TEAM_ATTR_UNSPEC,
-	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
-	TEAM_ATTR_LIST_OPTION,		/* nest */
-	TEAM_ATTR_LIST_PORT,		/* nest */
-
-	__TEAM_ATTR_MAX,
-	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
-};
-
-/* Nested layout of get/set msg:
- *
- *	[TEAM_ATTR_LIST_OPTION]
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		...
- *	[TEAM_ATTR_LIST_PORT]
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		...
- */
-
-enum {
-	TEAM_ATTR_ITEM_OPTION_UNSPEC,
-	TEAM_ATTR_ITEM_OPTION,		/* nest */
-
-	__TEAM_ATTR_ITEM_OPTION_MAX,
-	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_OPTION_UNSPEC,
-	TEAM_ATTR_OPTION_NAME,		/* string */
-	TEAM_ATTR_OPTION_CHANGED,	/* flag */
-	TEAM_ATTR_OPTION_TYPE,		/* u8 */
-	TEAM_ATTR_OPTION_DATA,		/* dynamic */
-	TEAM_ATTR_OPTION_REMOVED,	/* flag */
-	TEAM_ATTR_OPTION_PORT_IFINDEX,	/* u32 */ /* for per-port options */
-	TEAM_ATTR_OPTION_ARRAY_INDEX,	/* u32 */ /* for array options */
-
-	__TEAM_ATTR_OPTION_MAX,
-	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_ITEM_PORT_UNSPEC,
-	TEAM_ATTR_ITEM_PORT,		/* nest */
-
-	__TEAM_ATTR_ITEM_PORT_MAX,
-	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_PORT_UNSPEC,
-	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
-	TEAM_ATTR_PORT_CHANGED,		/* flag */
-	TEAM_ATTR_PORT_LINKUP,		/* flag */
-	TEAM_ATTR_PORT_SPEED,		/* u32 */
-	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
-	TEAM_ATTR_PORT_REMOVED,		/* flag */
-
-	__TEAM_ATTR_PORT_MAX,
-	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define TEAM_GENL_NAME "team"
-#define TEAM_GENL_VERSION 0x1
-#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
-
 #endif /* _LINUX_IF_TEAM_H_ */
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 06b1829731fd6f6c7f4864463c0ee2b73b4e15bf..ed6da2e6df9019d576292e43bd612c898961d9ce 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -12,86 +12,11 @@
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  *  GNU General Public License for more details.
  */
-
 #ifndef __IF_TUN_H
 #define __IF_TUN_H
 
-#include <linux/types.h>
-#include <linux/if_ether.h>
-#include <linux/filter.h>
-
-/* Read queue size */
-#define TUN_READQ_SIZE	500
-
-/* TUN device flags */
-#define TUN_TUN_DEV 	0x0001	
-#define TUN_TAP_DEV	0x0002
-#define TUN_TYPE_MASK   0x000f
-
-#define TUN_FASYNC	0x0010
-#define TUN_NOCHECKSUM	0x0020
-#define TUN_NO_PI	0x0040
-#define TUN_ONE_QUEUE	0x0080
-#define TUN_PERSIST 	0x0100	
-#define TUN_VNET_HDR 	0x0200
-
-/* Ioctl defines */
-#define TUNSETNOCSUM  _IOW('T', 200, int) 
-#define TUNSETDEBUG   _IOW('T', 201, int) 
-#define TUNSETIFF     _IOW('T', 202, int) 
-#define TUNSETPERSIST _IOW('T', 203, int) 
-#define TUNSETOWNER   _IOW('T', 204, int)
-#define TUNSETLINK    _IOW('T', 205, int)
-#define TUNSETGROUP   _IOW('T', 206, int)
-#define TUNGETFEATURES _IOR('T', 207, unsigned int)
-#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
-#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
-#define TUNGETIFF      _IOR('T', 210, unsigned int)
-#define TUNGETSNDBUF   _IOR('T', 211, int)
-#define TUNSETSNDBUF   _IOW('T', 212, int)
-#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
-#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
-#define TUNGETVNETHDRSZ _IOR('T', 215, int)
-#define TUNSETVNETHDRSZ _IOW('T', 216, int)
-
-/* TUNSETIFF ifr flags */
-#define IFF_TUN		0x0001
-#define IFF_TAP		0x0002
-#define IFF_NO_PI	0x1000
-#define IFF_ONE_QUEUE	0x2000
-#define IFF_VNET_HDR	0x4000
-#define IFF_TUN_EXCL	0x8000
-
-/* Features for GSO (TUNSETOFFLOAD). */
-#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
-#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
-#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
-#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
-#define TUN_F_UFO	0x10	/* I can handle UFO packets */
-
-/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
-#define TUN_PKT_STRIP	0x0001
-struct tun_pi {
-	__u16  flags;
-	__be16 proto;
-};
-
-/*
- * Filter spec (used for SETXXFILTER ioctls)
- * This stuff is applicable only to the TAP (Ethernet) devices.
- * If the count is zero the filter is disabled and the driver accepts
- * all packets (promisc mode).
- * If the filter is enabled in order to accept broadcast packets
- * broadcast addr must be explicitly included in the addr list.
- */
-#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
-struct tun_filter {
-	__u16  flags; /* TUN_FLT_ flags see above */
-	__u16  count; /* Number of addresses */
-	__u8   addr[0][ETH_ALEN];
-};
+#include <uapi/linux/if_tun.h>
 
-#ifdef __KERNEL__
 #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE)
 struct socket *tun_get_socket(struct file *);
 #else
@@ -104,5 +29,4 @@ static inline struct socket *tun_get_socket(struct file *f)
 	return ERR_PTR(-EINVAL);
 }
 #endif /* CONFIG_TUN */
-#endif /* __KERNEL__ */
 #endif /* __IF_TUN_H */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 8c5035ac31421aa1bee89a34c342de34ff63131a..1cc595a67cc900b18afe694ca712700fba7e5c2e 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -1,100 +1,8 @@
 #ifndef _IF_TUNNEL_H_
 #define _IF_TUNNEL_H_
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
 #include <linux/ip.h>
 #include <linux/in6.h>
-#endif
-
-#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
-#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
-#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
-#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
-#define SIOCGETPRL      (SIOCDEVPRIVATE + 4)
-#define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
-#define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
-#define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
-#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
-#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
-#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
-#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
-
-#define GRE_CSUM	__cpu_to_be16(0x8000)
-#define GRE_ROUTING	__cpu_to_be16(0x4000)
-#define GRE_KEY		__cpu_to_be16(0x2000)
-#define GRE_SEQ		__cpu_to_be16(0x1000)
-#define GRE_STRICT	__cpu_to_be16(0x0800)
-#define GRE_REC		__cpu_to_be16(0x0700)
-#define GRE_FLAGS	__cpu_to_be16(0x00F8)
-#define GRE_VERSION	__cpu_to_be16(0x0007)
-
-struct ip_tunnel_parm {
-	char			name[IFNAMSIZ];
-	int			link;
-	__be16			i_flags;
-	__be16			o_flags;
-	__be32			i_key;
-	__be32			o_key;
-	struct iphdr		iph;
-};
-
-/* SIT-mode i_flags */
-#define	SIT_ISATAP	0x0001
-
-struct ip_tunnel_prl {
-	__be32			addr;
-	__u16			flags;
-	__u16			__reserved;
-	__u32			datalen;
-	__u32			__reserved2;
-	/* data follows */
-};
-
-/* PRL flags */
-#define	PRL_DEFAULT		0x0001
-
-struct ip_tunnel_6rd {
-	struct in6_addr		prefix;
-	__be32			relay_prefix;
-	__u16			prefixlen;
-	__u16			relay_prefixlen;
-};
-
-enum {
-	IFLA_GRE_UNSPEC,
-	IFLA_GRE_LINK,
-	IFLA_GRE_IFLAGS,
-	IFLA_GRE_OFLAGS,
-	IFLA_GRE_IKEY,
-	IFLA_GRE_OKEY,
-	IFLA_GRE_LOCAL,
-	IFLA_GRE_REMOTE,
-	IFLA_GRE_TTL,
-	IFLA_GRE_TOS,
-	IFLA_GRE_PMTUDISC,
-	IFLA_GRE_ENCAP_LIMIT,
-	IFLA_GRE_FLOWINFO,
-	IFLA_GRE_FLAGS,
-	__IFLA_GRE_MAX,
-};
-
-#define IFLA_GRE_MAX	(__IFLA_GRE_MAX - 1)
-
-/* VTI-mode i_flags */
-#define VTI_ISVTI 0x0001
-
-enum {
-	IFLA_VTI_UNSPEC,
-	IFLA_VTI_LINK,
-	IFLA_VTI_IKEY,
-	IFLA_VTI_OKEY,
-	IFLA_VTI_LOCAL,
-	IFLA_VTI_REMOTE,
-	__IFLA_VTI_MAX,
-};
+#include <uapi/linux/if_tunnel.h>
 
-#define IFLA_VTI_MAX	(__IFLA_VTI_MAX - 1)
 #endif /* _IF_TUNNEL_H_ */
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index c0ff748d0aa546671293ba5b42c46d108b7a6e26..d06cc5c8f58cf3a58ed34101f362a0b9be0fc0a6 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -9,15 +9,14 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef _LINUX_IF_VLAN_H_
 #define _LINUX_IF_VLAN_H_
 
-#ifdef __KERNEL__
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
 #include <linux/bug.h>
+#include <uapi/linux/if_vlan.h>
 
 #define VLAN_HLEN	4		/* The additional bytes required by VLAN
 					 * (in addition to the Ethernet header)
@@ -361,52 +360,4 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb,
 		 */
 		skb->protocol = htons(ETH_P_802_2);
 }
-#endif /* __KERNEL__ */
-
-/* VLAN IOCTLs are found in sockios.h */
-
-/* Passed in vlan_ioctl_args structure to determine behaviour. */
-enum vlan_ioctl_cmds {
-	ADD_VLAN_CMD,
-	DEL_VLAN_CMD,
-	SET_VLAN_INGRESS_PRIORITY_CMD,
-	SET_VLAN_EGRESS_PRIORITY_CMD,
-	GET_VLAN_INGRESS_PRIORITY_CMD,
-	GET_VLAN_EGRESS_PRIORITY_CMD,
-	SET_VLAN_NAME_TYPE_CMD,
-	SET_VLAN_FLAG_CMD,
-	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
-	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
-};
-
-enum vlan_flags {
-	VLAN_FLAG_REORDER_HDR	= 0x1,
-	VLAN_FLAG_GVRP		= 0x2,
-	VLAN_FLAG_LOOSE_BINDING	= 0x4,
-};
-
-enum vlan_name_types {
-	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
-	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
-	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
-	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
-	VLAN_NAME_TYPE_HIGHEST
-};
-
-struct vlan_ioctl_args {
-	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
-	char device1[24];
-
-        union {
-		char device2[24];
-		int VID;
-		unsigned int skb_priority;
-		unsigned int name_type;
-		unsigned int bind_type;
-		unsigned int flag; /* Matches vlan_dev_priv flags */
-        } u;
-
-	short vlan_qos;   
-};
-
 #endif /* !(_LINUX_IF_VLAN_H_) */
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 82de336b81550af6a64fff632037acec7e145f2a..7f2bf15184802b12733489b36755fce4e9c2caf4 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -12,123 +12,13 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IGMP_H
 #define _LINUX_IGMP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- *	IGMP protocol structures
- */
-
-/*
- *	Header in on cable format
- */
-
-struct igmphdr {
-	__u8 type;
-	__u8 code;		/* For newer IGMP */
-	__sum16 csum;
-	__be32 group;
-};
-
-/* V3 group record types [grec_type] */
-#define IGMPV3_MODE_IS_INCLUDE		1
-#define IGMPV3_MODE_IS_EXCLUDE		2
-#define IGMPV3_CHANGE_TO_INCLUDE	3
-#define IGMPV3_CHANGE_TO_EXCLUDE	4
-#define IGMPV3_ALLOW_NEW_SOURCES	5
-#define IGMPV3_BLOCK_OLD_SOURCES	6
-
-struct igmpv3_grec {
-	__u8	grec_type;
-	__u8	grec_auxwords;
-	__be16	grec_nsrcs;
-	__be32	grec_mca;
-	__be32	grec_src[0];
-};
-
-struct igmpv3_report {
-	__u8 type;
-	__u8 resv1;
-	__be16 csum;
-	__be16 resv2;
-	__be16 ngrec;
-	struct igmpv3_grec grec[0];
-};
-
-struct igmpv3_query {
-	__u8 type;
-	__u8 code;
-	__be16 csum;
-	__be32 group;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 qrv:3,
-	     suppress:1,
-	     resv:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 resv:4,
-	     suppress:1,
-	     qrv:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	__u8 qqic;
-	__be16 nsrcs;
-	__be32 srcs[0];
-};
-
-#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
-#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
-#define IGMP_DVMRP			0x13	/* DVMRP routing */
-#define IGMP_PIM			0x14	/* PIM routing */
-#define IGMP_TRACE			0x15
-#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
-#define IGMP_HOST_LEAVE_MESSAGE 	0x17
-#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
-
-#define IGMP_MTRACE_RESP		0x1e
-#define IGMP_MTRACE			0x1f
-
-
-/*
- *	Use the BSD names for these for compatibility
- */
-
-#define IGMP_DELAYING_MEMBER		0x01
-#define IGMP_IDLE_MEMBER		0x02
-#define IGMP_LAZY_MEMBER		0x03
-#define IGMP_SLEEPING_MEMBER		0x04
-#define IGMP_AWAKENING_MEMBER		0x05
-
-#define IGMP_MINLEN			8
-
-#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
-						/* query (in seconds)	*/
-
-#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
-						/* specifies time in 10th of seconds	 */
-
-#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
-						/* message in this period of time,	*/
-						/* revert to IGMP v2 router.		*/
-
-#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
-#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
-#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
-#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
-#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
-
-/*
- * struct for keeping the multicast list in
- */
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
 #include <linux/timer.h>
 #include <linux/in.h>
+#include <uapi/linux/igmp.h>
 
 static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb)
 {
@@ -241,4 +131,3 @@ extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr);
 extern void ip_mc_rejoin_groups(struct in_device *in_dev);
 
 #endif
-#endif
diff --git a/include/linux/in.h b/include/linux/in.h
index e0337f11d92eb54e0c78db71a9d1b6fcb3f42d80..31b493734763df02cb16d4480787adf4bc927ed3 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -18,240 +18,9 @@
 #ifndef _LINUX_IN_H
 #define _LINUX_IN_H
 
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Standard well-defined IP protocols.  */
-enum {
-  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
-  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
-  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
-  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
-  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
-  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
-  IPPROTO_PUP = 12,		/* PUP protocol				*/
-  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
-  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
-  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
-  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
-  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
-
-  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
-
-  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
-  IPPROTO_AH = 51,             /* Authentication Header protocol       */
-  IPPROTO_BEETPH = 94,	       /* IP option pseudo header for BEET */
-  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
-
-  IPPROTO_COMP   = 108,                /* Compression Header protocol */
-  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
-  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
-
-  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
-  IPPROTO_MAX
-};
-
-
-/* Internet address. */
-struct in_addr {
-	__be32	s_addr;
-};
-
-#define IP_TOS		1
-#define IP_TTL		2
-#define IP_HDRINCL	3
-#define IP_OPTIONS	4
-#define IP_ROUTER_ALERT	5
-#define IP_RECVOPTS	6
-#define IP_RETOPTS	7
-#define IP_PKTINFO	8
-#define IP_PKTOPTIONS	9
-#define IP_MTU_DISCOVER	10
-#define IP_RECVERR	11
-#define IP_RECVTTL	12
-#define	IP_RECVTOS	13
-#define IP_MTU		14
-#define IP_FREEBIND	15
-#define IP_IPSEC_POLICY	16
-#define IP_XFRM_POLICY	17
-#define IP_PASSSEC	18
-#define IP_TRANSPARENT	19
-
-/* BSD compatibility */
-#define IP_RECVRETOPTS	IP_RETOPTS
-
-/* TProxy original addresses */
-#define IP_ORIGDSTADDR       20
-#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
-
-#define IP_MINTTL       21
-#define IP_NODEFRAG     22
-
-/* IP_MTU_DISCOVER values */
-#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
-#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
-#define IP_PMTUDISC_DO			2	/* Always DF		*/
-#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
-
-#define IP_MULTICAST_IF			32
-#define IP_MULTICAST_TTL 		33
-#define IP_MULTICAST_LOOP 		34
-#define IP_ADD_MEMBERSHIP		35
-#define IP_DROP_MEMBERSHIP		36
-#define IP_UNBLOCK_SOURCE		37
-#define IP_BLOCK_SOURCE			38
-#define IP_ADD_SOURCE_MEMBERSHIP	39
-#define IP_DROP_SOURCE_MEMBERSHIP	40
-#define IP_MSFILTER			41
-#define MCAST_JOIN_GROUP		42
-#define MCAST_BLOCK_SOURCE		43
-#define MCAST_UNBLOCK_SOURCE		44
-#define MCAST_LEAVE_GROUP		45
-#define MCAST_JOIN_SOURCE_GROUP		46
-#define MCAST_LEAVE_SOURCE_GROUP	47
-#define MCAST_MSFILTER			48
-#define IP_MULTICAST_ALL		49
-#define IP_UNICAST_IF			50
-
-#define MCAST_EXCLUDE	0
-#define MCAST_INCLUDE	1
-
-/* These need to appear somewhere around here */
-#define IP_DEFAULT_MULTICAST_TTL        1
-#define IP_DEFAULT_MULTICAST_LOOP       1
-
-/* Request struct for multicast socket ops */
-
-struct ip_mreq  {
-	struct in_addr imr_multiaddr;	/* IP multicast address of group */
-	struct in_addr imr_interface;	/* local IP address of interface */
-};
-
-struct ip_mreqn {
-	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
-	struct in_addr	imr_address;		/* local IP address of interface */
-	int		imr_ifindex;		/* Interface index */
-};
-
-struct ip_mreq_source {
-	__be32		imr_multiaddr;
-	__be32		imr_interface;
-	__be32		imr_sourceaddr;
-};
-
-struct ip_msfilter {
-	__be32		imsf_multiaddr;
-	__be32		imsf_interface;
-	__u32		imsf_fmode;
-	__u32		imsf_numsrc;
-	__be32		imsf_slist[1];
-};
-
-#define IP_MSFILTER_SIZE(numsrc) \
-	(sizeof(struct ip_msfilter) - sizeof(__u32) \
-	+ (numsrc) * sizeof(__u32))
-
-struct group_req {
-	__u32				 gr_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gr_group;	/* group address */
-};
-
-struct group_source_req {
-	__u32				 gsr_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gsr_group;	/* group address */
-	struct __kernel_sockaddr_storage gsr_source;	/* source address */
-};
-
-struct group_filter {
-	__u32				 gf_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
-	__u32				 gf_fmode;	/* filter mode */
-	__u32				 gf_numsrc;	/* number of sources */
-	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
-};
-
-#define GROUP_FILTER_SIZE(numsrc) \
-	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
-	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
-
-struct in_pktinfo {
-	int		ipi_ifindex;
-	struct in_addr	ipi_spec_dst;
-	struct in_addr	ipi_addr;
-};
-
-/* Structure describing an Internet (IP) socket address. */
-#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
-struct sockaddr_in {
-  __kernel_sa_family_t	sin_family;	/* Address family		*/
-  __be16		sin_port;	/* Port number			*/
-  struct in_addr	sin_addr;	/* Internet address		*/
-
-  /* Pad to size of `struct sockaddr'. */
-  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
-			sizeof(unsigned short int) - sizeof(struct in_addr)];
-};
-#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
-
-
-/*
- * Definitions of the bits in an Internet address integer.
- * On subnets, host and network parts are found according
- * to the subnet mask, not these masks.
- */
-#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
-#define	IN_CLASSA_NET		0xff000000
-#define	IN_CLASSA_NSHIFT	24
-#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
-#define	IN_CLASSA_MAX		128
-
-#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
-#define	IN_CLASSB_NET		0xffff0000
-#define	IN_CLASSB_NSHIFT	16
-#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
-#define	IN_CLASSB_MAX		65536
-
-#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
-#define	IN_CLASSC_NET		0xffffff00
-#define	IN_CLASSC_NSHIFT	8
-#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
-
-#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
-#define	IN_MULTICAST(a)		IN_CLASSD(a)
-#define IN_MULTICAST_NET	0xF0000000
-
-#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
-#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
-
-/* Address to accept any incoming messages. */
-#define	INADDR_ANY		((unsigned long int) 0x00000000)
-
-/* Address to send to all hosts. */
-#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
-
-/* Address indicating an error return. */
-#define	INADDR_NONE		((unsigned long int) 0xffffffff)
-
-/* Network number for local host loopback. */
-#define	IN_LOOPBACKNET		127
-
-/* Address to loopback in software to local host.  */
-#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
-#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
-
-/* Defines for Multicast INADDR */
-#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
-#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
-#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
-#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
-
-
-/* <asm/byteorder.h> contains the htonl type stuff.. */
-#include <asm/byteorder.h> 
-
-#ifdef __KERNEL__
 
 #include <linux/errno.h>
+#include <uapi/linux/in.h>
 
 static inline int proto_ports_offset(int proto)
 {
@@ -332,6 +101,4 @@ static inline bool ipv4_is_test_198(__be32 addr)
 {
 	return (addr & htonl(0xfffe0000)) == htonl(0xc6120000);
 }
-#endif
-
 #endif	/* _LINUX_IN_H */
diff --git a/include/linux/in6.h b/include/linux/in6.h
index cba469ba11a42d9e59a200623739aa6409fb3e7e..9e2ae26fb5981703159c27cc60e7c73cf6d311f6 100644
--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -17,32 +17,11 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IN6_H
 #define _LINUX_IN6_H
 
-#include <linux/types.h>
-
-/*
- *	IPv6 address structure
- */
-
-struct in6_addr {
-	union {
-		__u8		u6_addr8[16];
-		__be16		u6_addr16[8];
-		__be32		u6_addr32[4];
-	} in6_u;
-#define s6_addr			in6_u.u6_addr8
-#define s6_addr16		in6_u.u6_addr16
-#define s6_addr32		in6_u.u6_addr32
-};
+#include <uapi/linux/in6.h>
 
-/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
- * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
- * in network byte order, not in host byte order as are the IPv4 equivalents
- */
-#ifdef __KERNEL__
 extern const struct in6_addr in6addr_any;
 #define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
 extern const struct in6_addr in6addr_loopback;
@@ -54,238 +33,3 @@ extern const struct in6_addr in6addr_linklocal_allrouters;
 #define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
 		{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } }
 #endif
-
-struct sockaddr_in6 {
-	unsigned short int	sin6_family;    /* AF_INET6 */
-	__be16			sin6_port;      /* Transport layer port # */
-	__be32			sin6_flowinfo;  /* IPv6 flow information */
-	struct in6_addr		sin6_addr;      /* IPv6 address */
-	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
-};
-
-struct ipv6_mreq {
-	/* IPv6 multicast address of group */
-	struct in6_addr ipv6mr_multiaddr;
-
-	/* local IPv6 address of interface */
-	int		ipv6mr_ifindex;
-};
-
-#define ipv6mr_acaddr	ipv6mr_multiaddr
-
-struct in6_flowlabel_req {
-	struct in6_addr	flr_dst;
-	__be32	flr_label;
-	__u8	flr_action;
-	__u8	flr_share;
-	__u16	flr_flags;
-	__u16 	flr_expires;
-	__u16	flr_linger;
-	__u32	__flr_pad;
-	/* Options in format of IPV6_PKTOPTIONS */
-};
-
-#define IPV6_FL_A_GET	0
-#define IPV6_FL_A_PUT	1
-#define IPV6_FL_A_RENEW	2
-
-#define IPV6_FL_F_CREATE	1
-#define IPV6_FL_F_EXCL		2
-
-#define IPV6_FL_S_NONE		0
-#define IPV6_FL_S_EXCL		1
-#define IPV6_FL_S_PROCESS	2
-#define IPV6_FL_S_USER		3
-#define IPV6_FL_S_ANY		255
-
-
-/*
- *	Bitmask constant declarations to help applications select out the 
- *	flow label and priority fields.
- *
- *	Note that this are in host byte order while the flowinfo field of
- *	sockaddr_in6 is in network byte order.
- */
-
-#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
-#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
-
-/* These definitions are obsolete */
-#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
-#define IPV6_PRIORITY_FILLER		0x0100
-#define IPV6_PRIORITY_UNATTENDED	0x0200
-#define IPV6_PRIORITY_RESERVED1		0x0300
-#define IPV6_PRIORITY_BULK		0x0400
-#define IPV6_PRIORITY_RESERVED2		0x0500
-#define IPV6_PRIORITY_INTERACTIVE	0x0600
-#define IPV6_PRIORITY_CONTROL		0x0700
-#define IPV6_PRIORITY_8			0x0800
-#define IPV6_PRIORITY_9			0x0900
-#define IPV6_PRIORITY_10		0x0a00
-#define IPV6_PRIORITY_11		0x0b00
-#define IPV6_PRIORITY_12		0x0c00
-#define IPV6_PRIORITY_13		0x0d00
-#define IPV6_PRIORITY_14		0x0e00
-#define IPV6_PRIORITY_15		0x0f00
-
-/*
- *	IPV6 extension headers
- */
-#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
-#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
-#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
-#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
-#define IPPROTO_NONE		59	/* IPv6 no next header		*/
-#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
-#define IPPROTO_MH		135	/* IPv6 mobility header		*/
-
-/*
- *	IPv6 TLV options.
- */
-#define IPV6_TLV_PAD1		0
-#define IPV6_TLV_PADN		1
-#define IPV6_TLV_ROUTERALERT	5
-#define IPV6_TLV_JUMBO		194
-#define IPV6_TLV_HAO		201	/* home address option */
-
-/*
- *	IPV6 socket options
- */
-
-#define IPV6_ADDRFORM		1
-#define IPV6_2292PKTINFO	2
-#define IPV6_2292HOPOPTS	3
-#define IPV6_2292DSTOPTS	4
-#define IPV6_2292RTHDR		5
-#define IPV6_2292PKTOPTIONS	6
-#define IPV6_CHECKSUM		7
-#define IPV6_2292HOPLIMIT	8
-#define IPV6_NEXTHOP		9
-#define IPV6_AUTHHDR		10	/* obsolete */
-#define IPV6_FLOWINFO		11
-
-#define IPV6_UNICAST_HOPS	16
-#define IPV6_MULTICAST_IF	17
-#define IPV6_MULTICAST_HOPS	18
-#define IPV6_MULTICAST_LOOP	19
-#define IPV6_ADD_MEMBERSHIP	20
-#define IPV6_DROP_MEMBERSHIP	21
-#define IPV6_ROUTER_ALERT	22
-#define IPV6_MTU_DISCOVER	23
-#define IPV6_MTU		24
-#define IPV6_RECVERR		25
-#define IPV6_V6ONLY		26
-#define IPV6_JOIN_ANYCAST	27
-#define IPV6_LEAVE_ANYCAST	28
-
-/* IPV6_MTU_DISCOVER values */
-#define IPV6_PMTUDISC_DONT		0
-#define IPV6_PMTUDISC_WANT		1
-#define IPV6_PMTUDISC_DO		2
-#define IPV6_PMTUDISC_PROBE		3
-
-/* Flowlabel */
-#define IPV6_FLOWLABEL_MGR	32
-#define IPV6_FLOWINFO_SEND	33
-
-#define IPV6_IPSEC_POLICY	34
-#define IPV6_XFRM_POLICY	35
-
-/*
- * Multicast:
- * Following socket options are shared between IPv4 and IPv6.
- *
- * MCAST_JOIN_GROUP		42
- * MCAST_BLOCK_SOURCE		43
- * MCAST_UNBLOCK_SOURCE		44
- * MCAST_LEAVE_GROUP		45
- * MCAST_JOIN_SOURCE_GROUP	46
- * MCAST_LEAVE_SOURCE_GROUP	47
- * MCAST_MSFILTER		48
- */
-
-/*
- * Advanced API (RFC3542) (1)
- *
- * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
- */
-
-#define IPV6_RECVPKTINFO	49
-#define IPV6_PKTINFO		50
-#define IPV6_RECVHOPLIMIT	51
-#define IPV6_HOPLIMIT		52
-#define IPV6_RECVHOPOPTS	53
-#define IPV6_HOPOPTS		54
-#define IPV6_RTHDRDSTOPTS	55
-#define IPV6_RECVRTHDR		56
-#define IPV6_RTHDR		57
-#define IPV6_RECVDSTOPTS	58
-#define IPV6_DSTOPTS		59
-#define IPV6_RECVPATHMTU	60
-#define IPV6_PATHMTU		61
-#define IPV6_DONTFRAG		62
-#if 0	/* not yet */
-#define IPV6_USE_MIN_MTU	63
-#endif
-
-/*
- * Netfilter (1)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO		64
- * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES	65
- */
-
-/*
- * Advanced API (RFC3542) (2)
- */
-#define IPV6_RECVTCLASS		66
-#define IPV6_TCLASS		67
-
-/*
- * Netfilter (2)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_GET_REVISION_MATCH	68
- * IP6T_SO_GET_REVISION_TARGET	69
- */
-
-/* RFC5014: Source address selection */
-#define IPV6_ADDR_PREFERENCES	72
-
-#define IPV6_PREFER_SRC_TMP		0x0001
-#define IPV6_PREFER_SRC_PUBLIC		0x0002
-#define IPV6_PREFER_SRC_PUBTMP_DEFAULT	0x0100
-#define IPV6_PREFER_SRC_COA		0x0004
-#define IPV6_PREFER_SRC_HOME		0x0400
-#define IPV6_PREFER_SRC_CGA		0x0008
-#define IPV6_PREFER_SRC_NONCGA		0x0800
-
-/* RFC5082: Generalized Ttl Security Mechanism */
-#define IPV6_MINHOPCOUNT		73
-
-#define IPV6_ORIGDSTADDR        74
-#define IPV6_RECVORIGDSTADDR    IPV6_ORIGDSTADDR
-#define IPV6_TRANSPARENT        75
-#define IPV6_UNICAST_IF         76
-
-/*
- * Multicast Routing:
- * see include/linux/mroute6.h.
- *
- * MRT6_INIT			200
- * MRT6_DONE			201
- * MRT6_ADD_MIF			202
- * MRT6_DEL_MIF			203
- * MRT6_ADD_MFC			204
- * MRT6_DEL_MFC			205
- * MRT6_VERSION			206
- * MRT6_ASSERT			207
- * MRT6_PIM			208
- * (reserved)			209
- */
-#endif
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index e788c186ed3a85a933b0ce219d4f6b8b8bb84e88..46da02410a09691c5e624df266cfc0c105fce6d9 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -1,138 +1,8 @@
 #ifndef _INET_DIAG_H_
 #define _INET_DIAG_H_ 1
 
-#include <linux/types.h>
+#include <uapi/linux/inet_diag.h>
 
-/* Just some random number */
-#define TCPDIAG_GETSOCK 18
-#define DCCPDIAG_GETSOCK 19
-
-#define INET_DIAG_GETSOCK_MAX 24
-
-/* Socket identity */
-struct inet_diag_sockid {
-	__be16	idiag_sport;
-	__be16	idiag_dport;
-	__be32	idiag_src[4];
-	__be32	idiag_dst[4];
-	__u32	idiag_if;
-	__u32	idiag_cookie[2];
-#define INET_DIAG_NOCOOKIE (~0U)
-};
-
-/* Request structure */
-
-struct inet_diag_req {
-	__u8	idiag_family;		/* Family of addresses. */
-	__u8	idiag_src_len;
-	__u8	idiag_dst_len;
-	__u8	idiag_ext;		/* Query extended information */
-
-	struct inet_diag_sockid id;
-
-	__u32	idiag_states;		/* States to dump */
-	__u32	idiag_dbs;		/* Tables to dump (NI) */
-};
-
-struct inet_diag_req_v2 {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-	__u8	idiag_ext;
-	__u8	pad;
-	__u32	idiag_states;
-	struct inet_diag_sockid id;
-};
-
-enum {
-	INET_DIAG_REQ_NONE,
-	INET_DIAG_REQ_BYTECODE,
-};
-
-#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
-
-/* Bytecode is sequence of 4 byte commands followed by variable arguments.
- * All the commands identified by "code" are conditional jumps forward:
- * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
- * length of the command and its arguments.
- */
- 
-struct inet_diag_bc_op {
-	unsigned char	code;
-	unsigned char	yes;
-	unsigned short	no;
-};
-
-enum {
-	INET_DIAG_BC_NOP,
-	INET_DIAG_BC_JMP,
-	INET_DIAG_BC_S_GE,
-	INET_DIAG_BC_S_LE,
-	INET_DIAG_BC_D_GE,
-	INET_DIAG_BC_D_LE,
-	INET_DIAG_BC_AUTO,
-	INET_DIAG_BC_S_COND,
-	INET_DIAG_BC_D_COND,
-};
-
-struct inet_diag_hostcond {
-	__u8	family;
-	__u8	prefix_len;
-	int	port;
-	__be32	addr[0];
-};
-
-/* Base info structure. It contains socket identity (addrs/ports/cookie)
- * and, alas, the information shown by netstat. */
-struct inet_diag_msg {
-	__u8	idiag_family;
-	__u8	idiag_state;
-	__u8	idiag_timer;
-	__u8	idiag_retrans;
-
-	struct inet_diag_sockid id;
-
-	__u32	idiag_expires;
-	__u32	idiag_rqueue;
-	__u32	idiag_wqueue;
-	__u32	idiag_uid;
-	__u32	idiag_inode;
-};
-
-/* Extensions */
-
-enum {
-	INET_DIAG_NONE,
-	INET_DIAG_MEMINFO,
-	INET_DIAG_INFO,
-	INET_DIAG_VEGASINFO,
-	INET_DIAG_CONG,
-	INET_DIAG_TOS,
-	INET_DIAG_TCLASS,
-	INET_DIAG_SKMEMINFO,
-};
-
-#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
-
-
-/* INET_DIAG_MEM */
-
-struct inet_diag_meminfo {
-	__u32	idiag_rmem;
-	__u32	idiag_wmem;
-	__u32	idiag_fmem;
-	__u32	idiag_tmem;
-};
-
-/* INET_DIAG_VEGASINFO */
-
-struct tcpvegas_info {
-	__u32	tcpv_enabled;
-	__u32	tcpv_rttcnt;
-	__u32	tcpv_rtt;
-	__u32	tcpv_minrtt;
-};
-
-#ifdef __KERNEL__
 struct sock;
 struct inet_hashinfo;
 struct nlattr;
@@ -173,6 +43,4 @@ int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk);
 
 extern int  inet_diag_register(const struct inet_diag_handler *handler);
 extern void inet_diag_unregister(const struct inet_diag_handler *handler);
-#endif /* __KERNEL__ */
-
 #endif /* _INET_DIAG_H_ */
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index d33041e2a42a6ee16bef9df6348eb4ec026cefd3..23aede0b5843b7481e2385be955a71ae45d91c0e 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -3,75 +3,12 @@
  *
  * Copyright (C) 2005 John McCutchan
  */
-
 #ifndef _LINUX_INOTIFY_H
 #define _LINUX_INOTIFY_H
 
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/*
- * struct inotify_event - structure read from the inotify device for each event
- *
- * When you are watching a directory, you will receive the filename for events
- * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
- */
-struct inotify_event {
-	__s32		wd;		/* watch descriptor */
-	__u32		mask;		/* watch mask */
-	__u32		cookie;		/* cookie to synchronize two events */
-	__u32		len;		/* length (including nulls) of name */
-	char		name[0];	/* stub for possible name */
-};
-
-/* the following are legal, implemented events that user-space can watch for */
-#define IN_ACCESS		0x00000001	/* File was accessed */
-#define IN_MODIFY		0x00000002	/* File was modified */
-#define IN_ATTRIB		0x00000004	/* Metadata changed */
-#define IN_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
-#define IN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define IN_OPEN			0x00000020	/* File was opened */
-#define IN_MOVED_FROM		0x00000040	/* File was moved from X */
-#define IN_MOVED_TO		0x00000080	/* File was moved to Y */
-#define IN_CREATE		0x00000100	/* Subfile was created */
-#define IN_DELETE		0x00000200	/* Subfile was deleted */
-#define IN_DELETE_SELF		0x00000400	/* Self was deleted */
-#define IN_MOVE_SELF		0x00000800	/* Self was moved */
-
-/* the following are legal events.  they are sent as needed to any watch */
-#define IN_UNMOUNT		0x00002000	/* Backing fs was unmounted */
-#define IN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-#define IN_IGNORED		0x00008000	/* File was ignored */
-
-/* helper events */
-#define IN_CLOSE		(IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
-#define IN_MOVE			(IN_MOVED_FROM | IN_MOVED_TO) /* moves */
-
-/* special flags */
-#define IN_ONLYDIR		0x01000000	/* only watch the path if it is a directory */
-#define IN_DONT_FOLLOW		0x02000000	/* don't follow a sym link */
-#define IN_EXCL_UNLINK		0x04000000	/* exclude events on unlinked objects */
-#define IN_MASK_ADD		0x20000000	/* add to the mask of an already existing watch */
-#define IN_ISDIR		0x40000000	/* event occurred against dir */
-#define IN_ONESHOT		0x80000000	/* only send event once */
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility.  Apps will get only the
- * events that they originally wanted.  Be sure to add new events here!
- */
-#define IN_ALL_EVENTS	(IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
-			 IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
-			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
-			 IN_MOVE_SELF)
-
-/* Flags for sys_inotify_init1.  */
-#define IN_CLOEXEC O_CLOEXEC
-#define IN_NONBLOCK O_NONBLOCK
-
-#ifdef __KERNEL__
 #include <linux/sysctl.h>
+#include <uapi/linux/inotify.h>
+
 extern struct ctl_table inotify_table[]; /* for sysctl */
 
 #define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
@@ -82,6 +19,4 @@ extern struct ctl_table inotify_table[]; /* for sysctl */
 			  IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
 			  IN_ISDIR | IN_ONESHOT)
 
-#endif
-
 #endif	/* _LINUX_INOTIFY_H */
diff --git a/include/linux/input.h b/include/linux/input.h
index 15464ba6bf53e9d19abcdcb8b9c5d28683c57957..cab994ba6d919f14563f71774a07c405eafa915b 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1,6 +1,3 @@
-#ifndef _INPUT_H
-#define _INPUT_H
-
 /*
  * Copyright (c) 1999-2002 Vojtech Pavlik
  *
@@ -8,1156 +5,15 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _INPUT_H
+#define _INPUT_H
 
-#ifdef __KERNEL__
 #include <linux/time.h>
 #include <linux/list.h>
-#else
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/types.h>
-#endif
-
-/*
- * The event structure itself
- */
-
-struct input_event {
-	struct timeval time;
-	__u16 type;
-	__u16 code;
-	__s32 value;
-};
-
-/*
- * Protocol version.
- */
-
-#define EV_VERSION		0x010001
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-struct input_id {
-	__u16 bustype;
-	__u16 vendor;
-	__u16 product;
-	__u16 version;
-};
-
-/**
- * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
- * @value: latest reported value for the axis.
- * @minimum: specifies minimum value for the axis.
- * @maximum: specifies maximum value for the axis.
- * @fuzz: specifies fuzz value that is used to filter noise from
- *	the event stream.
- * @flat: values that are within this value will be discarded by
- *	joydev interface and reported as 0 instead.
- * @resolution: specifies resolution for the values reported for
- *	the axis.
- *
- * Note that input core does not clamp reported values to the
- * [minimum, maximum] limits, such task is left to userspace.
- *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
- */
-struct input_absinfo {
-	__s32 value;
-	__s32 minimum;
-	__s32 maximum;
-	__s32 fuzz;
-	__s32 flat;
-	__s32 resolution;
-};
-
-/**
- * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
- * @scancode: scancode represented in machine-endian form.
- * @len: length of the scancode that resides in @scancode buffer.
- * @index: index in the keymap, may be used instead of scancode
- * @flags: allows to specify how kernel should handle the request. For
- *	example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
- *	should perform lookup in keymap by @index instead of @scancode
- * @keycode: key code assigned to this scancode
- *
- * The structure is used to retrieve and modify keymap data. Users have
- * option of performing lookup either by @scancode itself or by @index
- * in keymap entry. EVIOCGKEYCODE will also return scancode or index
- * (depending on which element was used to perform lookup).
- */
-struct input_keymap_entry {
-#define INPUT_KEYMAP_BY_INDEX	(1 << 0)
-	__u8  flags;
-	__u8  len;
-	__u16 index;
-	__u32 keycode;
-	__u8  scancode[32];
-};
-
-#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
-#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
-#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
-#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
-
-#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
-#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
-#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
-#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
-
-#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
-#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
-#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
-#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
-
-/**
- * EVIOCGMTSLOTS(len) - get MT slot values
- * @len: size of the data buffer in bytes
- *
- * The ioctl buffer argument should be binary equivalent to
- *
- * struct input_mt_request_layout {
- *	__u32 code;
- *	__s32 values[num_slots];
- * };
- *
- * where num_slots is the (arbitrary) number of MT slots to extract.
- *
- * The ioctl size argument (len) is the size of the buffer, which
- * should satisfy len = (num_slots + 1) * sizeof(__s32).  If len is
- * too small to fit all available slots, the first num_slots are
- * returned.
- *
- * Before the call, code is set to the wanted ABS_MT event type. On
- * return, values[] is filled with the slot values for the specified
- * ABS_MT code.
- *
- * If the request code is not an ABS_MT value, -EINVAL is returned.
- */
-#define EVIOCGMTSLOTS(len)	_IOC(_IOC_READ, 'E', 0x0a, len)
-
-#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
-#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
-#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
-#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
-
-#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
-#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
-#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
-
-#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
-#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
-#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
-
-#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
-
-#define EVIOCSCLOCKID		_IOW('E', 0xa0, int)			/* Set clockid to be used for timestamps */
-
-/*
- * Device properties and quirks
- */
-
-#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
-#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
-#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
-#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
-
-#define INPUT_PROP_MAX			0x1f
-#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
-
-/*
- * Event types
- */
-
-#define EV_SYN			0x00
-#define EV_KEY			0x01
-#define EV_REL			0x02
-#define EV_ABS			0x03
-#define EV_MSC			0x04
-#define EV_SW			0x05
-#define EV_LED			0x11
-#define EV_SND			0x12
-#define EV_REP			0x14
-#define EV_FF			0x15
-#define EV_PWR			0x16
-#define EV_FF_STATUS		0x17
-#define EV_MAX			0x1f
-#define EV_CNT			(EV_MAX+1)
-
-/*
- * Synchronization events.
- */
-
-#define SYN_REPORT		0
-#define SYN_CONFIG		1
-#define SYN_MT_REPORT		2
-#define SYN_DROPPED		3
-
-/*
- * Keys and buttons
- *
- * Most of the keys/buttons are modeled after USB HUT 1.12
- * (see http://www.usb.org/developers/hidpage).
- * Abbreviations in the comments:
- * AC - Application Control
- * AL - Application Launch Button
- * SC - System Control
- */
-
-#define KEY_RESERVED		0
-#define KEY_ESC			1
-#define KEY_1			2
-#define KEY_2			3
-#define KEY_3			4
-#define KEY_4			5
-#define KEY_5			6
-#define KEY_6			7
-#define KEY_7			8
-#define KEY_8			9
-#define KEY_9			10
-#define KEY_0			11
-#define KEY_MINUS		12
-#define KEY_EQUAL		13
-#define KEY_BACKSPACE		14
-#define KEY_TAB			15
-#define KEY_Q			16
-#define KEY_W			17
-#define KEY_E			18
-#define KEY_R			19
-#define KEY_T			20
-#define KEY_Y			21
-#define KEY_U			22
-#define KEY_I			23
-#define KEY_O			24
-#define KEY_P			25
-#define KEY_LEFTBRACE		26
-#define KEY_RIGHTBRACE		27
-#define KEY_ENTER		28
-#define KEY_LEFTCTRL		29
-#define KEY_A			30
-#define KEY_S			31
-#define KEY_D			32
-#define KEY_F			33
-#define KEY_G			34
-#define KEY_H			35
-#define KEY_J			36
-#define KEY_K			37
-#define KEY_L			38
-#define KEY_SEMICOLON		39
-#define KEY_APOSTROPHE		40
-#define KEY_GRAVE		41
-#define KEY_LEFTSHIFT		42
-#define KEY_BACKSLASH		43
-#define KEY_Z			44
-#define KEY_X			45
-#define KEY_C			46
-#define KEY_V			47
-#define KEY_B			48
-#define KEY_N			49
-#define KEY_M			50
-#define KEY_COMMA		51
-#define KEY_DOT			52
-#define KEY_SLASH		53
-#define KEY_RIGHTSHIFT		54
-#define KEY_KPASTERISK		55
-#define KEY_LEFTALT		56
-#define KEY_SPACE		57
-#define KEY_CAPSLOCK		58
-#define KEY_F1			59
-#define KEY_F2			60
-#define KEY_F3			61
-#define KEY_F4			62
-#define KEY_F5			63
-#define KEY_F6			64
-#define KEY_F7			65
-#define KEY_F8			66
-#define KEY_F9			67
-#define KEY_F10			68
-#define KEY_NUMLOCK		69
-#define KEY_SCROLLLOCK		70
-#define KEY_KP7			71
-#define KEY_KP8			72
-#define KEY_KP9			73
-#define KEY_KPMINUS		74
-#define KEY_KP4			75
-#define KEY_KP5			76
-#define KEY_KP6			77
-#define KEY_KPPLUS		78
-#define KEY_KP1			79
-#define KEY_KP2			80
-#define KEY_KP3			81
-#define KEY_KP0			82
-#define KEY_KPDOT		83
-
-#define KEY_ZENKAKUHANKAKU	85
-#define KEY_102ND		86
-#define KEY_F11			87
-#define KEY_F12			88
-#define KEY_RO			89
-#define KEY_KATAKANA		90
-#define KEY_HIRAGANA		91
-#define KEY_HENKAN		92
-#define KEY_KATAKANAHIRAGANA	93
-#define KEY_MUHENKAN		94
-#define KEY_KPJPCOMMA		95
-#define KEY_KPENTER		96
-#define KEY_RIGHTCTRL		97
-#define KEY_KPSLASH		98
-#define KEY_SYSRQ		99
-#define KEY_RIGHTALT		100
-#define KEY_LINEFEED		101
-#define KEY_HOME		102
-#define KEY_UP			103
-#define KEY_PAGEUP		104
-#define KEY_LEFT		105
-#define KEY_RIGHT		106
-#define KEY_END			107
-#define KEY_DOWN		108
-#define KEY_PAGEDOWN		109
-#define KEY_INSERT		110
-#define KEY_DELETE		111
-#define KEY_MACRO		112
-#define KEY_MUTE		113
-#define KEY_VOLUMEDOWN		114
-#define KEY_VOLUMEUP		115
-#define KEY_POWER		116	/* SC System Power Down */
-#define KEY_KPEQUAL		117
-#define KEY_KPPLUSMINUS		118
-#define KEY_PAUSE		119
-#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA		121
-#define KEY_HANGEUL		122
-#define KEY_HANGUEL		KEY_HANGEUL
-#define KEY_HANJA		123
-#define KEY_YEN			124
-#define KEY_LEFTMETA		125
-#define KEY_RIGHTMETA		126
-#define KEY_COMPOSE		127
-
-#define KEY_STOP		128	/* AC Stop */
-#define KEY_AGAIN		129
-#define KEY_PROPS		130	/* AC Properties */
-#define KEY_UNDO		131	/* AC Undo */
-#define KEY_FRONT		132
-#define KEY_COPY		133	/* AC Copy */
-#define KEY_OPEN		134	/* AC Open */
-#define KEY_PASTE		135	/* AC Paste */
-#define KEY_FIND		136	/* AC Search */
-#define KEY_CUT			137	/* AC Cut */
-#define KEY_HELP		138	/* AL Integrated Help Center */
-#define KEY_MENU		139	/* Menu (show menu) */
-#define KEY_CALC		140	/* AL Calculator */
-#define KEY_SETUP		141
-#define KEY_SLEEP		142	/* SC System Sleep */
-#define KEY_WAKEUP		143	/* System Wake Up */
-#define KEY_FILE		144	/* AL Local Machine Browser */
-#define KEY_SENDFILE		145
-#define KEY_DELETEFILE		146
-#define KEY_XFER		147
-#define KEY_PROG1		148
-#define KEY_PROG2		149
-#define KEY_WWW			150	/* AL Internet Browser */
-#define KEY_MSDOS		151
-#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK		KEY_COFFEE
-#define KEY_DIRECTION		153
-#define KEY_CYCLEWINDOWS	154
-#define KEY_MAIL		155
-#define KEY_BOOKMARKS		156	/* AC Bookmarks */
-#define KEY_COMPUTER		157
-#define KEY_BACK		158	/* AC Back */
-#define KEY_FORWARD		159	/* AC Forward */
-#define KEY_CLOSECD		160
-#define KEY_EJECTCD		161
-#define KEY_EJECTCLOSECD	162
-#define KEY_NEXTSONG		163
-#define KEY_PLAYPAUSE		164
-#define KEY_PREVIOUSSONG	165
-#define KEY_STOPCD		166
-#define KEY_RECORD		167
-#define KEY_REWIND		168
-#define KEY_PHONE		169	/* Media Select Telephone */
-#define KEY_ISO			170
-#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE		172	/* AC Home */
-#define KEY_REFRESH		173	/* AC Refresh */
-#define KEY_EXIT		174	/* AC Exit */
-#define KEY_MOVE		175
-#define KEY_EDIT		176
-#define KEY_SCROLLUP		177
-#define KEY_SCROLLDOWN		178
-#define KEY_KPLEFTPAREN		179
-#define KEY_KPRIGHTPAREN	180
-#define KEY_NEW			181	/* AC New */
-#define KEY_REDO		182	/* AC Redo/Repeat */
-
-#define KEY_F13			183
-#define KEY_F14			184
-#define KEY_F15			185
-#define KEY_F16			186
-#define KEY_F17			187
-#define KEY_F18			188
-#define KEY_F19			189
-#define KEY_F20			190
-#define KEY_F21			191
-#define KEY_F22			192
-#define KEY_F23			193
-#define KEY_F24			194
-
-#define KEY_PLAYCD		200
-#define KEY_PAUSECD		201
-#define KEY_PROG3		202
-#define KEY_PROG4		203
-#define KEY_DASHBOARD		204	/* AL Dashboard */
-#define KEY_SUSPEND		205
-#define KEY_CLOSE		206	/* AC Close */
-#define KEY_PLAY		207
-#define KEY_FASTFORWARD		208
-#define KEY_BASSBOOST		209
-#define KEY_PRINT		210	/* AC Print */
-#define KEY_HP			211
-#define KEY_CAMERA		212
-#define KEY_SOUND		213
-#define KEY_QUESTION		214
-#define KEY_EMAIL		215
-#define KEY_CHAT		216
-#define KEY_SEARCH		217
-#define KEY_CONNECT		218
-#define KEY_FINANCE		219	/* AL Checkbook/Finance */
-#define KEY_SPORT		220
-#define KEY_SHOP		221
-#define KEY_ALTERASE		222
-#define KEY_CANCEL		223	/* AC Cancel */
-#define KEY_BRIGHTNESSDOWN	224
-#define KEY_BRIGHTNESSUP	225
-#define KEY_MEDIA		226
-
-#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
-					   outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE	228
-#define KEY_KBDILLUMDOWN	229
-#define KEY_KBDILLUMUP		230
-
-#define KEY_SEND		231	/* AC Send */
-#define KEY_REPLY		232	/* AC Reply */
-#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
-#define KEY_SAVE		234	/* AC Save */
-#define KEY_DOCUMENTS		235
-
-#define KEY_BATTERY		236
-
-#define KEY_BLUETOOTH		237
-#define KEY_WLAN		238
-#define KEY_UWB			239
-
-#define KEY_UNKNOWN		240
-
-#define KEY_VIDEO_NEXT		241	/* drive next video source */
-#define KEY_VIDEO_PREV		242	/* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
-#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
-#define KEY_DISPLAY_OFF		245	/* display device to off state */
-
-#define KEY_WIMAX		246
-#define KEY_RFKILL		247	/* Key that controls all radios */
-
-#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC		0x100
-#define BTN_0			0x100
-#define BTN_1			0x101
-#define BTN_2			0x102
-#define BTN_3			0x103
-#define BTN_4			0x104
-#define BTN_5			0x105
-#define BTN_6			0x106
-#define BTN_7			0x107
-#define BTN_8			0x108
-#define BTN_9			0x109
-
-#define BTN_MOUSE		0x110
-#define BTN_LEFT		0x110
-#define BTN_RIGHT		0x111
-#define BTN_MIDDLE		0x112
-#define BTN_SIDE		0x113
-#define BTN_EXTRA		0x114
-#define BTN_FORWARD		0x115
-#define BTN_BACK		0x116
-#define BTN_TASK		0x117
-
-#define BTN_JOYSTICK		0x120
-#define BTN_TRIGGER		0x120
-#define BTN_THUMB		0x121
-#define BTN_THUMB2		0x122
-#define BTN_TOP			0x123
-#define BTN_TOP2		0x124
-#define BTN_PINKIE		0x125
-#define BTN_BASE		0x126
-#define BTN_BASE2		0x127
-#define BTN_BASE3		0x128
-#define BTN_BASE4		0x129
-#define BTN_BASE5		0x12a
-#define BTN_BASE6		0x12b
-#define BTN_DEAD		0x12f
-
-#define BTN_GAMEPAD		0x130
-#define BTN_A			0x130
-#define BTN_B			0x131
-#define BTN_C			0x132
-#define BTN_X			0x133
-#define BTN_Y			0x134
-#define BTN_Z			0x135
-#define BTN_TL			0x136
-#define BTN_TR			0x137
-#define BTN_TL2			0x138
-#define BTN_TR2			0x139
-#define BTN_SELECT		0x13a
-#define BTN_START		0x13b
-#define BTN_MODE		0x13c
-#define BTN_THUMBL		0x13d
-#define BTN_THUMBR		0x13e
-
-#define BTN_DIGI		0x140
-#define BTN_TOOL_PEN		0x140
-#define BTN_TOOL_RUBBER		0x141
-#define BTN_TOOL_BRUSH		0x142
-#define BTN_TOOL_PENCIL		0x143
-#define BTN_TOOL_AIRBRUSH	0x144
-#define BTN_TOOL_FINGER		0x145
-#define BTN_TOOL_MOUSE		0x146
-#define BTN_TOOL_LENS		0x147
-#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
-#define BTN_TOUCH		0x14a
-#define BTN_STYLUS		0x14b
-#define BTN_STYLUS2		0x14c
-#define BTN_TOOL_DOUBLETAP	0x14d
-#define BTN_TOOL_TRIPLETAP	0x14e
-#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
-
-#define BTN_WHEEL		0x150
-#define BTN_GEAR_DOWN		0x150
-#define BTN_GEAR_UP		0x151
-
-#define KEY_OK			0x160
-#define KEY_SELECT		0x161
-#define KEY_GOTO		0x162
-#define KEY_CLEAR		0x163
-#define KEY_POWER2		0x164
-#define KEY_OPTION		0x165
-#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME		0x167
-#define KEY_VENDOR		0x168
-#define KEY_ARCHIVE		0x169
-#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
-#define KEY_CHANNEL		0x16b
-#define KEY_FAVORITES		0x16c
-#define KEY_EPG			0x16d
-#define KEY_PVR			0x16e	/* Media Select Home */
-#define KEY_MHP			0x16f
-#define KEY_LANGUAGE		0x170
-#define KEY_TITLE		0x171
-#define KEY_SUBTITLE		0x172
-#define KEY_ANGLE		0x173
-#define KEY_ZOOM		0x174
-#define KEY_MODE		0x175
-#define KEY_KEYBOARD		0x176
-#define KEY_SCREEN		0x177
-#define KEY_PC			0x178	/* Media Select Computer */
-#define KEY_TV			0x179	/* Media Select TV */
-#define KEY_TV2			0x17a	/* Media Select Cable */
-#define KEY_VCR			0x17b	/* Media Select VCR */
-#define KEY_VCR2		0x17c	/* VCR Plus */
-#define KEY_SAT			0x17d	/* Media Select Satellite */
-#define KEY_SAT2		0x17e
-#define KEY_CD			0x17f	/* Media Select CD */
-#define KEY_TAPE		0x180	/* Media Select Tape */
-#define KEY_RADIO		0x181
-#define KEY_TUNER		0x182	/* Media Select Tuner */
-#define KEY_PLAYER		0x183
-#define KEY_TEXT		0x184
-#define KEY_DVD			0x185	/* Media Select DVD */
-#define KEY_AUX			0x186
-#define KEY_MP3			0x187
-#define KEY_AUDIO		0x188	/* AL Audio Browser */
-#define KEY_VIDEO		0x189	/* AL Movie Browser */
-#define KEY_DIRECTORY		0x18a
-#define KEY_LIST		0x18b
-#define KEY_MEMO		0x18c	/* Media Select Messages */
-#define KEY_CALENDAR		0x18d
-#define KEY_RED			0x18e
-#define KEY_GREEN		0x18f
-#define KEY_YELLOW		0x190
-#define KEY_BLUE		0x191
-#define KEY_CHANNELUP		0x192	/* Channel Increment */
-#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
-#define KEY_FIRST		0x194
-#define KEY_LAST		0x195	/* Recall Last */
-#define KEY_AB			0x196
-#define KEY_NEXT		0x197
-#define KEY_RESTART		0x198
-#define KEY_SLOW		0x199
-#define KEY_SHUFFLE		0x19a
-#define KEY_BREAK		0x19b
-#define KEY_PREVIOUS		0x19c
-#define KEY_DIGITS		0x19d
-#define KEY_TEEN		0x19e
-#define KEY_TWEN		0x19f
-#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
-#define KEY_GAMES		0x1a1	/* Media Select Games */
-#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
-#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
-#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
-#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
-#define KEY_EDITOR		0x1a6	/* AL Text Editor */
-#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
-#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
-#define KEY_DATABASE		0x1aa	/* AL Database App */
-#define KEY_NEWS		0x1ab	/* AL Newsreader */
-#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
-#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
-#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
-#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
-#define KEY_LOGOFF		0x1b1   /* AL Logoff */
-
-#define KEY_DOLLAR		0x1b2
-#define KEY_EURO		0x1b3
-
-#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
-#define KEY_FRAMEFORWARD	0x1b5
-#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
-#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
-#define KEY_IMAGES		0x1ba	/* AL Image Browser */
-
-#define KEY_DEL_EOL		0x1c0
-#define KEY_DEL_EOS		0x1c1
-#define KEY_INS_LINE		0x1c2
-#define KEY_DEL_LINE		0x1c3
-
-#define KEY_FN			0x1d0
-#define KEY_FN_ESC		0x1d1
-#define KEY_FN_F1		0x1d2
-#define KEY_FN_F2		0x1d3
-#define KEY_FN_F3		0x1d4
-#define KEY_FN_F4		0x1d5
-#define KEY_FN_F5		0x1d6
-#define KEY_FN_F6		0x1d7
-#define KEY_FN_F7		0x1d8
-#define KEY_FN_F8		0x1d9
-#define KEY_FN_F9		0x1da
-#define KEY_FN_F10		0x1db
-#define KEY_FN_F11		0x1dc
-#define KEY_FN_F12		0x1dd
-#define KEY_FN_1		0x1de
-#define KEY_FN_2		0x1df
-#define KEY_FN_D		0x1e0
-#define KEY_FN_E		0x1e1
-#define KEY_FN_F		0x1e2
-#define KEY_FN_S		0x1e3
-#define KEY_FN_B		0x1e4
-
-#define KEY_BRL_DOT1		0x1f1
-#define KEY_BRL_DOT2		0x1f2
-#define KEY_BRL_DOT3		0x1f3
-#define KEY_BRL_DOT4		0x1f4
-#define KEY_BRL_DOT5		0x1f5
-#define KEY_BRL_DOT6		0x1f6
-#define KEY_BRL_DOT7		0x1f7
-#define KEY_BRL_DOT8		0x1f8
-#define KEY_BRL_DOT9		0x1f9
-#define KEY_BRL_DOT10		0x1fa
-
-#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
-#define KEY_NUMERIC_1		0x201	/* and other keypads */
-#define KEY_NUMERIC_2		0x202
-#define KEY_NUMERIC_3		0x203
-#define KEY_NUMERIC_4		0x204
-#define KEY_NUMERIC_5		0x205
-#define KEY_NUMERIC_6		0x206
-#define KEY_NUMERIC_7		0x207
-#define KEY_NUMERIC_8		0x208
-#define KEY_NUMERIC_9		0x209
-#define KEY_NUMERIC_STAR	0x20a
-#define KEY_NUMERIC_POUND	0x20b
-
-#define KEY_CAMERA_FOCUS	0x210
-#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON		0x213
-#define KEY_TOUCHPAD_OFF	0x214
-
-#define KEY_CAMERA_ZOOMIN	0x215
-#define KEY_CAMERA_ZOOMOUT	0x216
-#define KEY_CAMERA_UP		0x217
-#define KEY_CAMERA_DOWN		0x218
-#define KEY_CAMERA_LEFT		0x219
-#define KEY_CAMERA_RIGHT	0x21a
-
-#define BTN_TRIGGER_HAPPY		0x2c0
-#define BTN_TRIGGER_HAPPY1		0x2c0
-#define BTN_TRIGGER_HAPPY2		0x2c1
-#define BTN_TRIGGER_HAPPY3		0x2c2
-#define BTN_TRIGGER_HAPPY4		0x2c3
-#define BTN_TRIGGER_HAPPY5		0x2c4
-#define BTN_TRIGGER_HAPPY6		0x2c5
-#define BTN_TRIGGER_HAPPY7		0x2c6
-#define BTN_TRIGGER_HAPPY8		0x2c7
-#define BTN_TRIGGER_HAPPY9		0x2c8
-#define BTN_TRIGGER_HAPPY10		0x2c9
-#define BTN_TRIGGER_HAPPY11		0x2ca
-#define BTN_TRIGGER_HAPPY12		0x2cb
-#define BTN_TRIGGER_HAPPY13		0x2cc
-#define BTN_TRIGGER_HAPPY14		0x2cd
-#define BTN_TRIGGER_HAPPY15		0x2ce
-#define BTN_TRIGGER_HAPPY16		0x2cf
-#define BTN_TRIGGER_HAPPY17		0x2d0
-#define BTN_TRIGGER_HAPPY18		0x2d1
-#define BTN_TRIGGER_HAPPY19		0x2d2
-#define BTN_TRIGGER_HAPPY20		0x2d3
-#define BTN_TRIGGER_HAPPY21		0x2d4
-#define BTN_TRIGGER_HAPPY22		0x2d5
-#define BTN_TRIGGER_HAPPY23		0x2d6
-#define BTN_TRIGGER_HAPPY24		0x2d7
-#define BTN_TRIGGER_HAPPY25		0x2d8
-#define BTN_TRIGGER_HAPPY26		0x2d9
-#define BTN_TRIGGER_HAPPY27		0x2da
-#define BTN_TRIGGER_HAPPY28		0x2db
-#define BTN_TRIGGER_HAPPY29		0x2dc
-#define BTN_TRIGGER_HAPPY30		0x2dd
-#define BTN_TRIGGER_HAPPY31		0x2de
-#define BTN_TRIGGER_HAPPY32		0x2df
-#define BTN_TRIGGER_HAPPY33		0x2e0
-#define BTN_TRIGGER_HAPPY34		0x2e1
-#define BTN_TRIGGER_HAPPY35		0x2e2
-#define BTN_TRIGGER_HAPPY36		0x2e3
-#define BTN_TRIGGER_HAPPY37		0x2e4
-#define BTN_TRIGGER_HAPPY38		0x2e5
-#define BTN_TRIGGER_HAPPY39		0x2e6
-#define BTN_TRIGGER_HAPPY40		0x2e7
-
-/* We avoid low common keys in module aliases so they don't get huge. */
-#define KEY_MIN_INTERESTING	KEY_MUTE
-#define KEY_MAX			0x2ff
-#define KEY_CNT			(KEY_MAX+1)
-
-/*
- * Relative axes
- */
-
-#define REL_X			0x00
-#define REL_Y			0x01
-#define REL_Z			0x02
-#define REL_RX			0x03
-#define REL_RY			0x04
-#define REL_RZ			0x05
-#define REL_HWHEEL		0x06
-#define REL_DIAL		0x07
-#define REL_WHEEL		0x08
-#define REL_MISC		0x09
-#define REL_MAX			0x0f
-#define REL_CNT			(REL_MAX+1)
-
-/*
- * Absolute axes
- */
-
-#define ABS_X			0x00
-#define ABS_Y			0x01
-#define ABS_Z			0x02
-#define ABS_RX			0x03
-#define ABS_RY			0x04
-#define ABS_RZ			0x05
-#define ABS_THROTTLE		0x06
-#define ABS_RUDDER		0x07
-#define ABS_WHEEL		0x08
-#define ABS_GAS			0x09
-#define ABS_BRAKE		0x0a
-#define ABS_HAT0X		0x10
-#define ABS_HAT0Y		0x11
-#define ABS_HAT1X		0x12
-#define ABS_HAT1Y		0x13
-#define ABS_HAT2X		0x14
-#define ABS_HAT2Y		0x15
-#define ABS_HAT3X		0x16
-#define ABS_HAT3Y		0x17
-#define ABS_PRESSURE		0x18
-#define ABS_DISTANCE		0x19
-#define ABS_TILT_X		0x1a
-#define ABS_TILT_Y		0x1b
-#define ABS_TOOL_WIDTH		0x1c
-
-#define ABS_VOLUME		0x20
-
-#define ABS_MISC		0x28
-
-#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
-#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
-#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
-#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
-#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
-#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
-#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
-#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
-#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
-#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
-#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
-#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
-#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
-#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
-#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
-
-#ifdef __KERNEL__
+#include <uapi/linux/input.h>
 /* Implementation details, userspace should not care about these */
 #define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
 #define ABS_MT_LAST		ABS_MT_TOOL_Y
-#endif
-
-#define ABS_MAX			0x3f
-#define ABS_CNT			(ABS_MAX+1)
-
-/*
- * Switch events
- */
-
-#define SW_LID			0x00  /* set = lid shut */
-#define SW_TABLET_MODE		0x01  /* set = tablet mode */
-#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
-#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
-					 set = radio enabled */
-#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
-#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
-#define SW_DOCK			0x05  /* set = plugged into dock */
-#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
-#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
-#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
-#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
-#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
-#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
-#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
-#define SW_MAX			0x0f
-#define SW_CNT			(SW_MAX+1)
-
-/*
- * Misc events
- */
-
-#define MSC_SERIAL		0x00
-#define MSC_PULSELED		0x01
-#define MSC_GESTURE		0x02
-#define MSC_RAW			0x03
-#define MSC_SCAN		0x04
-#define MSC_MAX			0x07
-#define MSC_CNT			(MSC_MAX+1)
-
-/*
- * LEDs
- */
-
-#define LED_NUML		0x00
-#define LED_CAPSL		0x01
-#define LED_SCROLLL		0x02
-#define LED_COMPOSE		0x03
-#define LED_KANA		0x04
-#define LED_SLEEP		0x05
-#define LED_SUSPEND		0x06
-#define LED_MUTE		0x07
-#define LED_MISC		0x08
-#define LED_MAIL		0x09
-#define LED_CHARGING		0x0a
-#define LED_MAX			0x0f
-#define LED_CNT			(LED_MAX+1)
-
-/*
- * Autorepeat values
- */
-
-#define REP_DELAY		0x00
-#define REP_PERIOD		0x01
-#define REP_MAX			0x01
-#define REP_CNT			(REP_MAX+1)
-
-/*
- * Sounds
- */
-
-#define SND_CLICK		0x00
-#define SND_BELL		0x01
-#define SND_TONE		0x02
-#define SND_MAX			0x07
-#define SND_CNT			(SND_MAX+1)
-
-/*
- * IDs.
- */
-
-#define ID_BUS			0
-#define ID_VENDOR		1
-#define ID_PRODUCT		2
-#define ID_VERSION		3
-
-#define BUS_PCI			0x01
-#define BUS_ISAPNP		0x02
-#define BUS_USB			0x03
-#define BUS_HIL			0x04
-#define BUS_BLUETOOTH		0x05
-#define BUS_VIRTUAL		0x06
-
-#define BUS_ISA			0x10
-#define BUS_I8042		0x11
-#define BUS_XTKBD		0x12
-#define BUS_RS232		0x13
-#define BUS_GAMEPORT		0x14
-#define BUS_PARPORT		0x15
-#define BUS_AMIGA		0x16
-#define BUS_ADB			0x17
-#define BUS_I2C			0x18
-#define BUS_HOST		0x19
-#define BUS_GSC			0x1A
-#define BUS_ATARI		0x1B
-#define BUS_SPI			0x1C
-
-/*
- * MT_TOOL types
- */
-#define MT_TOOL_FINGER		0
-#define MT_TOOL_PEN		1
-#define MT_TOOL_MAX		1
-
-/*
- * Values describing the status of a force-feedback effect
- */
-#define FF_STATUS_STOPPED	0x00
-#define FF_STATUS_PLAYING	0x01
-#define FF_STATUS_MAX		0x01
-
-/*
- * Structures used in ioctls to upload effects to a device
- * They are pieces of a bigger structure (called ff_effect)
- */
-
-/*
- * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
- * should not be used and have unspecified results.
- */
-
-/**
- * struct ff_replay - defines scheduling of the force-feedback effect
- * @length: duration of the effect
- * @delay: delay before effect should start playing
- */
-struct ff_replay {
-	__u16 length;
-	__u16 delay;
-};
-
-/**
- * struct ff_trigger - defines what triggers the force-feedback effect
- * @button: number of the button triggering the effect
- * @interval: controls how soon the effect can be re-triggered
- */
-struct ff_trigger {
-	__u16 button;
-	__u16 interval;
-};
-
-/**
- * struct ff_envelope - generic force-feedback effect envelope
- * @attack_length: duration of the attack (ms)
- * @attack_level: level at the beginning of the attack
- * @fade_length: duration of fade (ms)
- * @fade_level: level at the end of fade
- *
- * The @attack_level and @fade_level are absolute values; when applying
- * envelope force-feedback core will convert to positive/negative
- * value based on polarity of the default level of the effect.
- * Valid range for the attack and fade levels is 0x0000 - 0x7fff
- */
-struct ff_envelope {
-	__u16 attack_length;
-	__u16 attack_level;
-	__u16 fade_length;
-	__u16 fade_level;
-};
-
-/**
- * struct ff_constant_effect - defines parameters of a constant force-feedback effect
- * @level: strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_constant_effect {
-	__s16 level;
-	struct ff_envelope envelope;
-};
-
-/**
- * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
- * @start_level: beginning strength of the effect; may be negative
- * @end_level: final strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_ramp_effect {
-	__s16 start_level;
-	__s16 end_level;
-	struct ff_envelope envelope;
-};
-
-/**
- * struct ff_condition_effect - defines a spring or friction force-feedback effect
- * @right_saturation: maximum level when joystick moved all way to the right
- * @left_saturation: same for the left side
- * @right_coeff: controls how fast the force grows when the joystick moves
- *	to the right
- * @left_coeff: same for the left side
- * @deadband: size of the dead zone, where no force is produced
- * @center: position of the dead zone
- */
-struct ff_condition_effect {
-	__u16 right_saturation;
-	__u16 left_saturation;
-
-	__s16 right_coeff;
-	__s16 left_coeff;
-
-	__u16 deadband;
-	__s16 center;
-};
-
-/**
- * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
- * @waveform: kind of the effect (wave)
- * @period: period of the wave (ms)
- * @magnitude: peak value
- * @offset: mean value of the wave (roughly)
- * @phase: 'horizontal' shift
- * @envelope: envelope data
- * @custom_len: number of samples (FF_CUSTOM only)
- * @custom_data: buffer of samples (FF_CUSTOM only)
- *
- * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
- * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
- * for the time being as no driver supports it yet.
- *
- * Note: the data pointed by custom_data is copied by the driver.
- * You can therefore dispose of the memory after the upload/update.
- */
-struct ff_periodic_effect {
-	__u16 waveform;
-	__u16 period;
-	__s16 magnitude;
-	__s16 offset;
-	__u16 phase;
-
-	struct ff_envelope envelope;
-
-	__u32 custom_len;
-	__s16 __user *custom_data;
-};
-
-/**
- * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
- * @strong_magnitude: magnitude of the heavy motor
- * @weak_magnitude: magnitude of the light one
- *
- * Some rumble pads have two motors of different weight. Strong_magnitude
- * represents the magnitude of the vibration generated by the heavy one.
- */
-struct ff_rumble_effect {
-	__u16 strong_magnitude;
-	__u16 weak_magnitude;
-};
-
-/**
- * struct ff_effect - defines force feedback effect
- * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
- *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
- * @id: an unique id assigned to an effect
- * @direction: direction of the effect
- * @trigger: trigger conditions (struct ff_trigger)
- * @replay: scheduling of the effect (struct ff_replay)
- * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
- *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
- *	defining effect parameters
- *
- * This structure is sent through ioctl from the application to the driver.
- * To create a new effect application should set its @id to -1; the kernel
- * will return assigned @id which can later be used to update or delete
- * this effect.
- *
- * Direction of the effect is encoded as follows:
- *	0 deg -> 0x0000 (down)
- *	90 deg -> 0x4000 (left)
- *	180 deg -> 0x8000 (up)
- *	270 deg -> 0xC000 (right)
- */
-struct ff_effect {
-	__u16 type;
-	__s16 id;
-	__u16 direction;
-	struct ff_trigger trigger;
-	struct ff_replay replay;
-
-	union {
-		struct ff_constant_effect constant;
-		struct ff_ramp_effect ramp;
-		struct ff_periodic_effect periodic;
-		struct ff_condition_effect condition[2]; /* One for each axis */
-		struct ff_rumble_effect rumble;
-	} u;
-};
-
-/*
- * Force feedback effect types
- */
-
-#define FF_RUMBLE	0x50
-#define FF_PERIODIC	0x51
-#define FF_CONSTANT	0x52
-#define FF_SPRING	0x53
-#define FF_FRICTION	0x54
-#define FF_DAMPER	0x55
-#define FF_INERTIA	0x56
-#define FF_RAMP		0x57
-
-#define FF_EFFECT_MIN	FF_RUMBLE
-#define FF_EFFECT_MAX	FF_RAMP
-
-/*
- * Force feedback periodic effect types
- */
-
-#define FF_SQUARE	0x58
-#define FF_TRIANGLE	0x59
-#define FF_SINE		0x5a
-#define FF_SAW_UP	0x5b
-#define FF_SAW_DOWN	0x5c
-#define FF_CUSTOM	0x5d
-
-#define FF_WAVEFORM_MIN	FF_SQUARE
-#define FF_WAVEFORM_MAX	FF_CUSTOM
-
-/*
- * Set ff device properties
- */
-
-#define FF_GAIN		0x60
-#define FF_AUTOCENTER	0x61
-
-#define FF_MAX		0x7f
-#define FF_CNT		(FF_MAX+1)
-
-#ifdef __KERNEL__
 
 /*
  * In-kernel definitions.
@@ -1668,4 +524,3 @@ int input_ff_create_memless(struct input_dev *dev, void *data,
 		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
 
 #endif
-#endif
diff --git a/include/linux/ip.h b/include/linux/ip.h
index bd0a2a8631c60e6620578acc68c363540aea1755..58b82a22a52b90288566eaa36e9d2bf8095a363c 100644
--- a/include/linux/ip.h
+++ b/include/linux/ip.h
@@ -16,96 +16,9 @@
  */
 #ifndef _LINUX_IP_H
 #define _LINUX_IP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
 
-#define IPTOS_TOS_MASK		0x1E
-#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
-#define	IPTOS_LOWDELAY		0x10
-#define	IPTOS_THROUGHPUT	0x08
-#define	IPTOS_RELIABILITY	0x04
-#define	IPTOS_MINCOST		0x02
-
-#define IPTOS_PREC_MASK		0xE0
-#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
-#define IPTOS_PREC_NETCONTROL           0xe0
-#define IPTOS_PREC_INTERNETCONTROL      0xc0
-#define IPTOS_PREC_CRITIC_ECP           0xa0
-#define IPTOS_PREC_FLASHOVERRIDE        0x80
-#define IPTOS_PREC_FLASH                0x60
-#define IPTOS_PREC_IMMEDIATE            0x40
-#define IPTOS_PREC_PRIORITY             0x20
-#define IPTOS_PREC_ROUTINE              0x00
-
-
-/* IP options */
-#define IPOPT_COPY		0x80
-#define IPOPT_CLASS_MASK	0x60
-#define IPOPT_NUMBER_MASK	0x1f
-
-#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
-#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
-#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
-
-#define	IPOPT_CONTROL		0x00
-#define	IPOPT_RESERVED1		0x20
-#define	IPOPT_MEASUREMENT	0x40
-#define	IPOPT_RESERVED2		0x60
-
-#define IPOPT_END	(0 |IPOPT_CONTROL)
-#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
-#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
-#define IPOPT_CIPSO	(6 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RR	(7 |IPOPT_CONTROL)
-#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
-
-#define IPVERSION	4
-#define MAXTTL		255
-#define IPDEFTTL	64
-
-#define IPOPT_OPTVAL 0
-#define IPOPT_OLEN   1
-#define IPOPT_OFFSET 2
-#define IPOPT_MINOFF 4
-#define MAX_IPOPTLEN 40
-#define IPOPT_NOP IPOPT_NOOP
-#define IPOPT_EOL IPOPT_END
-#define IPOPT_TS  IPOPT_TIMESTAMP
-
-#define	IPOPT_TS_TSONLY		0		/* timestamps only */
-#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
-#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
-
-#define IPV4_BEET_PHMAXLEN 8
-
-struct iphdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	ihl:4,
-		version:4;
-#elif defined (__BIG_ENDIAN_BITFIELD)
-	__u8	version:4,
-  		ihl:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8	tos;
-	__be16	tot_len;
-	__be16	id;
-	__be16	frag_off;
-	__u8	ttl;
-	__u8	protocol;
-	__sum16	check;
-	__be32	saddr;
-	__be32	daddr;
-	/*The options start here. */
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/ip.h>
 
 static inline struct iphdr *ip_hdr(const struct sk_buff *skb)
 {
@@ -116,34 +29,4 @@ static inline struct iphdr *ipip_hdr(const struct sk_buff *skb)
 {
 	return (struct iphdr *)skb_transport_header(skb);
 }
-#endif
-
-struct ip_auth_hdr {
-	__u8  nexthdr;
-	__u8  hdrlen;		/* This one is measured in 32 bit units! */
-	__be16 reserved;
-	__be32 spi;
-	__be32 seq_no;		/* Sequence number */
-	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
-};
-
-struct ip_esp_hdr {
-	__be32 spi;
-	__be32 seq_no;		/* Sequence number */
-	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
-};
-
-struct ip_comp_hdr {
-	__u8 nexthdr;
-	__u8 flags;
-	__be16 cpi;
-};
-
-struct ip_beet_phdr {
-	__u8 nexthdr;
-	__u8 hdrlen;
-	__u8 padlen;
-	__u8 reserved;
-};
-
 #endif	/* _LINUX_IP_H */
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index ca833fdc3138595ed076af4ba41003e37935e5a8..8d861b2651f7b0586edfa0be89adac92d9592746 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -1,85 +1,9 @@
 #ifndef _LINUX_IPC_H
 #define _LINUX_IPC_H
 
-#include <linux/types.h>
-
-#define IPC_PRIVATE ((__kernel_key_t) 0)  
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct ipc_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode; 
-	unsigned short	seq;
-};
-
-/* Include the definition of ipc64_perm */
-#include <asm/ipcbuf.h>
-
-/* resource get request flags */
-#define IPC_CREAT  00001000   /* create if key is nonexistent */
-#define IPC_EXCL   00002000   /* fail if key exists */
-#define IPC_NOWAIT 00004000   /* return error on wait */
-
-/* these fields are used by the DIPC package so the kernel as standard
-   should avoid using them if possible */
-   
-#define IPC_DIPC 00010000  /* make it distributed */
-#define IPC_OWN  00020000  /* this machine is the DIPC owner */
-
-/* 
- * Control commands used with semctl, msgctl and shmctl 
- * see also specific commands in sem.h, msg.h and shm.h
- */
-#define IPC_RMID 0     /* remove resource */
-#define IPC_SET  1     /* set ipc_perm options */
-#define IPC_STAT 2     /* get ipc_perm options */
-#define IPC_INFO 3     /* see ipcs */
-
-/*
- * Version flags for semctl, msgctl, and shmctl commands
- * These are passed as bitflags or-ed with the actual command
- */
-#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
-			   architectures) */
-#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
-			   message sizes, etc. */
-
-/*
- * These are used to wrap system calls.
- *
- * See architecture code for ugly details..
- */
-struct ipc_kludge {
-	struct msgbuf __user *msgp;
-	long msgtyp;
-};
-
-#define SEMOP		 1
-#define SEMGET		 2
-#define SEMCTL		 3
-#define SEMTIMEDOP	 4
-#define MSGSND		11
-#define MSGRCV		12
-#define MSGGET		13
-#define MSGCTL		14
-#define SHMAT		21
-#define SHMDT		22
-#define SHMGET		23
-#define SHMCTL		24
-
-/* Used by the DIPC package, try and avoid reusing it */
-#define DIPC            25
-
-#define IPCCALL(version,op)	((version)<<16 | (op))
-
-#ifdef __KERNEL__
 #include <linux/spinlock.h>
 #include <linux/uidgid.h>
+#include <uapi/linux/ipc.h>
 
 #define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
 
@@ -99,6 +23,4 @@ struct kern_ipc_perm
 	void		*security;
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_IPC_H */
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 48dcba9b2065d178d0dd0fa7d1d9d02f4bd191be..1487e7906bbdb3948f124bdfea8a0cf17075dd67 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -30,191 +30,11 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-
 #ifndef __LINUX_IPMI_H
 #define __LINUX_IPMI_H
 
-#include <linux/ipmi_msgdefs.h>
-#include <linux/compiler.h>
-
-/*
- * This file describes an interface to an IPMI driver.  You have to
- * have a fairly good understanding of IPMI to use this, so go read
- * the specs first before actually trying to do anything.
- *
- * With that said, this driver provides a multi-user interface to the
- * IPMI driver, and it allows multiple IPMI physical interfaces below
- * the driver.  The physical interfaces bind as a lower layer on the
- * driver.  They appear as interfaces to the application using this
- * interface.
- *
- * Multi-user means that multiple applications may use the driver,
- * send commands, receive responses, etc.  The driver keeps track of
- * commands the user sends and tracks the responses.  The responses
- * will go back to the application that send the command.  If the
- * response doesn't come back in time, the driver will return a
- * timeout error response to the application.  Asynchronous events
- * from the BMC event queue will go to all users bound to the driver.
- * The incoming event queue in the BMC will automatically be flushed
- * if it becomes full and it is queried once a second to see if
- * anything is in it.  Incoming commands to the driver will get
- * delivered as commands.
- *
- * This driver provides two main interfaces: one for in-kernel
- * applications and another for userland applications.  The
- * capabilities are basically the same for both interface, although
- * the interfaces are somewhat different.  The stuff in the
- * #ifdef __KERNEL__ below is the in-kernel interface.  The userland
- * interface is defined later in the file.  */
-
-
-
-/*
- * This is an overlay for all the address types, so it's easy to
- * determine the actual address type.  This is kind of like addresses
- * work for sockets.
- */
-#define IPMI_MAX_ADDR_SIZE 32
-struct ipmi_addr {
-	 /* Try to take these from the "Channel Medium Type" table
-	    in section 6.5 of the IPMI 1.5 manual. */
-	int   addr_type;
-	short channel;
-	char  data[IPMI_MAX_ADDR_SIZE];
-};
-
-/*
- * When the address is not used, the type will be set to this value.
- * The channel is the BMC's channel number for the channel (usually
- * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
- */
-#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
-struct ipmi_system_interface_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char lun;
-};
-
-/* An IPMB Address. */
-#define IPMI_IPMB_ADDR_TYPE		0x01
-/* Used for broadcast get device id as described in section 17.9 of the
-   IPMI 1.5 manual. */
-#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
-struct ipmi_ipmb_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char slave_addr;
-	unsigned char lun;
-};
-
-/*
- * A LAN Address.  This is an address to/from a LAN interface bridged
- * by the BMC, not an address actually out on the LAN.
- *
- * A conscious decision was made here to deviate slightly from the IPMI
- * spec.  We do not use rqSWID and rsSWID like it shows in the
- * message.  Instead, we use remote_SWID and local_SWID.  This means
- * that any message (a request or response) from another device will
- * always have exactly the same address.  If you didn't do this,
- * requests and responses from the same device would have different
- * addresses, and that's not too cool.
- *
- * In this address, the remote_SWID is always the SWID the remote
- * message came from, or the SWID we are sending the message to.
- * local_SWID is always our SWID.  Note that having our SWID in the
- * message is a little weird, but this is required.
- */
-#define IPMI_LAN_ADDR_TYPE		0x04
-struct ipmi_lan_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char privilege;
-	unsigned char session_handle;
-	unsigned char remote_SWID;
-	unsigned char local_SWID;
-	unsigned char lun;
-};
-
-
-/*
- * Channel for talking directly with the BMC.  When using this
- * channel, This is for the system interface address type only.  FIXME
- * - is this right, or should we use -1?
- */
-#define IPMI_BMC_CHANNEL  0xf
-#define IPMI_NUM_CHANNELS 0x10
-
-/*
- * Used to signify an "all channel" bitmask.  This is more than the
- * actual number of channels because this is used in userland and
- * will cover us if the number of channels is extended.
- */
-#define IPMI_CHAN_ALL     (~0)
-
-
-/*
- * A raw IPMI message without any addressing.  This covers both
- * commands and responses.  The completion code is always the first
- * byte of data in the response (as the spec shows the messages laid
- * out).
- */
-struct ipmi_msg {
-	unsigned char  netfn;
-	unsigned char  cmd;
-	unsigned short data_len;
-	unsigned char  __user *data;
-};
-
-struct kernel_ipmi_msg {
-	unsigned char  netfn;
-	unsigned char  cmd;
-	unsigned short data_len;
-	unsigned char  *data;
-};
-
-/*
- * Various defines that are useful for IPMI applications.
- */
-#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
-#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
-#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
-
+#include <uapi/linux/ipmi.h>
 
-/*
- * Receive types for messages coming from the receive interface.  This
- * is used for the receive in-kernel interface and in the receive
- * IOCTL.
- *
- * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
- * it allows you to get the message results when you send a response
- * message.
- */
-#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
-#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
-#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
-#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
-					      a sent response, giving any
-					      error status for sending the
-					      response.  When you send a
-					      response message, this will
-					      be returned. */
-#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
-
-/* Note that async events and received commands do not have a completion
-   code as the first byte of the incoming data, unlike a response. */
-
-
-/*
- * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
- * setting is the default and means it will be set on certain
- * commands.  Hard setting it on and off will override automatic
- * operation.
- */
-#define IPMI_MAINTENANCE_MODE_AUTO	0
-#define IPMI_MAINTENANCE_MODE_OFF	1
-#define IPMI_MAINTENANCE_MODE_ON	2
-
-#ifdef __KERNEL__
 
 /*
  * The in-kernel interface.
@@ -493,244 +313,4 @@ struct ipmi_smi_info {
 /* This is to get the private info of ipmi_smi_t */
 extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
 
-#endif /* __KERNEL__ */
-
-
-/*
- * The userland interface
- */
-
-/*
- * The userland interface for the IPMI driver is a standard character
- * device, with each instance of an interface registered as a minor
- * number under the major character device.
- *
- * The read and write calls do not work, to get messages in and out
- * requires ioctl calls because of the complexity of the data.  select
- * and poll do work, so you can wait for input using the file
- * descriptor, you just can use read to get it.
- *
- * In general, you send a command down to the interface and receive
- * responses back.  You can use the msgid value to correlate commands
- * and responses, the driver will take care of figuring out which
- * incoming messages are for which command and find the proper msgid
- * value to report.  You will only receive reponses for commands you
- * send.  Asynchronous events, however, go to all open users, so you
- * must be ready to handle these (or ignore them if you don't care).
- *
- * The address type depends upon the channel type.  When talking
- * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
- * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
- * supply a valid IPMB address with the addr_type set properly.
- *
- * When talking to normal channels, the driver takes care of the
- * details of formatting and sending messages on that channel.  You do
- * not, for instance, have to format a send command, you just send
- * whatever command you want to the channel, the driver will create
- * the send command, automatically issue receive command and get even
- * commands, and pass those up to the proper user.
- */
-
-
-/* The magic IOCTL value for this interface. */
-#define IPMI_IOC_MAGIC 'i'
-
-
-/* Messages sent to the interface are this format. */
-struct ipmi_req {
-	unsigned char __user *addr; /* Address to send the message to. */
-	unsigned int  addr_len;
-
-	long    msgid; /* The sequence number for the message.  This
-			  exact value will be reported back in the
-			  response to this request if it is a command.
-			  If it is a response, this will be used as
-			  the sequence value for the response.  */
-
-	struct ipmi_msg msg;
-};
-/*
- * Send a message to the interfaces.  error values are:
- *   - EFAULT - an address supplied was invalid.
- *   - EINVAL - The address supplied was not valid, or the command
- *              was not allowed.
- *   - EMSGSIZE - The message to was too large.
- *   - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
-					     struct ipmi_req)
-
-/* Messages sent to the interface with timing parameters are this
-   format. */
-struct ipmi_req_settime {
-	struct ipmi_req req;
-
-	/* See ipmi_request_settime() above for details on these
-	   values. */
-	int          retries;
-	unsigned int retry_time_ms;
-};
-/*
- * Send a message to the interfaces with timing parameters.  error values
- * are:
- *   - EFAULT - an address supplied was invalid.
- *   - EINVAL - The address supplied was not valid, or the command
- *              was not allowed.
- *   - EMSGSIZE - The message to was too large.
- *   - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
-					     struct ipmi_req_settime)
-
-/* Messages received from the interface are this format. */
-struct ipmi_recv {
-	int     recv_type; /* Is this a command, response or an
-			      asyncronous event. */
-
-	unsigned char __user *addr;    /* Address the message was from is put
-				   here.  The caller must supply the
-				   memory. */
-	unsigned int  addr_len; /* The size of the address buffer.
-				   The caller supplies the full buffer
-				   length, this value is updated to
-				   the actual message length when the
-				   message is received. */
-
-	long    msgid; /* The sequence number specified in the request
-			  if this is a response.  If this is a command,
-			  this will be the sequence number from the
-			  command. */
-
-	struct ipmi_msg msg; /* The data field must point to a buffer.
-				The data_size field must be set to the
-				size of the message buffer.  The
-				caller supplies the full buffer
-				length, this value is updated to the
-				actual message length when the message
-				is received. */
-};
-
-/*
- * Receive a message.  error values:
- *  - EAGAIN - no messages in the queue.
- *  - EFAULT - an address supplied was invalid.
- *  - EINVAL - The address supplied was not valid.
- *  - EMSGSIZE - The message to was too large to fit into the message buffer,
- *               the message will be left in the buffer. */
-#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
-					      struct ipmi_recv)
-
-/*
- * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
- * will truncate the contents instead of leaving the data in the
- * buffer.
- */
-#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
-					      struct ipmi_recv)
-
-/* Register to get commands from other entities on this interface. */
-struct ipmi_cmdspec {
-	unsigned char netfn;
-	unsigned char cmd;
-};
-
-/*
- * Register to receive a specific command.  error values:
- *   - EFAULT - an address supplied was invalid.
- *   - EBUSY - The netfn/cmd supplied was already in use.
- *   - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
-					     struct ipmi_cmdspec)
-/*
- * Unregister a regsitered command.  error values:
- *  - EFAULT - an address supplied was invalid.
- *  - ENOENT - The netfn/cmd was not found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
-					     struct ipmi_cmdspec)
-
-/*
- * Register to get commands from other entities on specific channels.
- * This way, you can only listen on specific channels, or have messages
- * from some channels go to one place and other channels to someplace
- * else.  The chans field is a bitmask, (1 << channel) for each channel.
- * It may be IPMI_CHAN_ALL for all channels.
- */
-struct ipmi_cmdspec_chans {
-	unsigned int netfn;
-	unsigned int cmd;
-	unsigned int chans;
-};
-
-/*
- * Register to receive a specific command on specific channels.  error values:
- *   - EFAULT - an address supplied was invalid.
- *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
- *   - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
-					     struct ipmi_cmdspec_chans)
-/*
- * Unregister some netfn/cmd/chans.  error values:
- *  - EFAULT - an address supplied was invalid.
- *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
-					     struct ipmi_cmdspec_chans)
-
-/*
- * Set whether this interface receives events.  Note that the first
- * user registered for events will get all pending events for the
- * interface.  error values:
- *  - EFAULT - an address supplied was invalid.
- */
-#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
-
-/*
- * Set and get the slave address and LUN that we will use for our
- * source messages.  Note that this affects the interface, not just
- * this user, so it will affect all users of this interface.  This is
- * so some initialization code can come in and do the OEM-specific
- * things it takes to determine your address (if not the BMC) and set
- * it for everyone else.  You should probably leave the LUN alone.
- */
-struct ipmi_channel_lun_address_set {
-	unsigned short channel;
-	unsigned char  value;
-};
-#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
-	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
-	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
-#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
-	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
-	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
-/* Legacy interfaces, these only set IPMB 0. */
-#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
-#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
-#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
-#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
-
-/*
- * Get/set the default timing values for an interface.  You shouldn't
- * generally mess with these.
- */
-struct ipmi_timing_parms {
-	int          retries;
-	unsigned int retry_time_ms;
-};
-#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
-					     struct ipmi_timing_parms)
-#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
-					     struct ipmi_timing_parms)
-
-/*
- * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
- * for a description of what this does.
- */
-#define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
-#define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
-
 #endif /* __LINUX_IPMI_H */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 0b94e91ed68529ef74573b4c170eb96f5afc8175..bcba48a97868e9b38d6a92f38e5175b2474df330 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -1,134 +1,9 @@
 #ifndef _IPV6_H
 #define _IPV6_H
 
-#include <linux/types.h>
-#include <linux/in6.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/ipv6.h>
 
-/* The latest drafts declared increase in minimal mtu up to 1280. */
-
-#define IPV6_MIN_MTU	1280
-
-/*
- *	Advanced API
- *	source interface/address selection, source routing, etc...
- *	*under construction*
- */
-
-
-struct in6_pktinfo {
-	struct in6_addr	ipi6_addr;
-	int		ipi6_ifindex;
-};
-
-struct ip6_mtuinfo {
-	struct sockaddr_in6	ip6m_addr;
-	__u32			ip6m_mtu;
-};
-
-struct in6_ifreq {
-	struct in6_addr	ifr6_addr;
-	__u32		ifr6_prefixlen;
-	int		ifr6_ifindex; 
-};
-
-#define IPV6_SRCRT_STRICT	0x01	/* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_0	0	/* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_2	2	/* IPv6 type 2 Routing Header	*/
-
-/*
- *	routing header
- */
-struct ipv6_rt_hdr {
-	__u8		nexthdr;
-	__u8		hdrlen;
-	__u8		type;
-	__u8		segments_left;
-
-	/*
-	 *	type specific data
-	 *	variable length field
-	 */
-};
-
-
-struct ipv6_opt_hdr {
-	__u8 		nexthdr;
-	__u8 		hdrlen;
-	/* 
-	 * TLV encoded option data follows.
-	 */
-} __attribute__((packed));	/* required for some archs */
-
-#define ipv6_destopt_hdr ipv6_opt_hdr
-#define ipv6_hopopt_hdr  ipv6_opt_hdr
-
-#ifdef __KERNEL__
 #define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
-#endif
-
-/*
- *	routing header type 0 (used in cmsghdr struct)
- */
-
-struct rt0_hdr {
-	struct ipv6_rt_hdr	rt_hdr;
-	__u32			reserved;
-	struct in6_addr		addr[0];
-
-#define rt0_type		rt_hdr.type
-};
-
-/*
- *	routing header type 2
- */
-
-struct rt2_hdr {
-	struct ipv6_rt_hdr	rt_hdr;
-	__u32			reserved;
-	struct in6_addr		addr;
-
-#define rt2_type		rt_hdr.type
-};
-
-/*
- *	home address option in destination options header
- */
-
-struct ipv6_destopt_hao {
-	__u8			type;
-	__u8			length;
-	struct in6_addr		addr;
-} __attribute__((packed));
-
-/*
- *	IPv6 fixed header
- *
- *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
- *	are glued to priority now, forming "class".
- */
-
-struct ipv6hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8			priority:4,
-				version:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8			version:4,
-				priority:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8			flow_lbl[3];
-
-	__be16			payload_len;
-	__u8			nexthdr;
-	__u8			hop_limit;
-
-	struct	in6_addr	saddr;
-	struct	in6_addr	daddr;
-};
-
-#ifdef __KERNEL__
 /*
  * This structure contains configuration options per IPv6 link.
  */
@@ -180,43 +55,6 @@ struct ipv6_params {
 	__s32 autoconf;
 };
 extern struct ipv6_params ipv6_defaults;
-#endif
-
-/* index values for the variables in ipv6_devconf */
-enum {
-	DEVCONF_FORWARDING = 0,
-	DEVCONF_HOPLIMIT,
-	DEVCONF_MTU6,
-	DEVCONF_ACCEPT_RA,
-	DEVCONF_ACCEPT_REDIRECTS,
-	DEVCONF_AUTOCONF,
-	DEVCONF_DAD_TRANSMITS,
-	DEVCONF_RTR_SOLICITS,
-	DEVCONF_RTR_SOLICIT_INTERVAL,
-	DEVCONF_RTR_SOLICIT_DELAY,
-	DEVCONF_USE_TEMPADDR,
-	DEVCONF_TEMP_VALID_LFT,
-	DEVCONF_TEMP_PREFERED_LFT,
-	DEVCONF_REGEN_MAX_RETRY,
-	DEVCONF_MAX_DESYNC_FACTOR,
-	DEVCONF_MAX_ADDRESSES,
-	DEVCONF_FORCE_MLD_VERSION,
-	DEVCONF_ACCEPT_RA_DEFRTR,
-	DEVCONF_ACCEPT_RA_PINFO,
-	DEVCONF_ACCEPT_RA_RTR_PREF,
-	DEVCONF_RTR_PROBE_INTERVAL,
-	DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
-	DEVCONF_PROXY_NDP,
-	DEVCONF_OPTIMISTIC_DAD,
-	DEVCONF_ACCEPT_SOURCE_ROUTE,
-	DEVCONF_MC_FORWARDING,
-	DEVCONF_DISABLE_IPV6,
-	DEVCONF_ACCEPT_DAD,
-	DEVCONF_FORCE_TLLAO,
-	DEVCONF_MAX
-};
-
-#ifdef __KERNEL__
 #include <linux/icmpv6.h>
 #include <linux/tcp.h>
 #include <linux/udp.h>
@@ -541,6 +379,4 @@ static inline struct raw6_sock *raw6_sk(const struct sock *sk)
 	 (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \
 	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
 
-#endif /* __KERNEL__ */
-
 #endif /* _IPV6_H */
diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h
index 1e7d8af2defe78d27bbe9c2518065b3679e63903..25b5f1f5e7802a6d53f41783d9c0b5bad256a173 100644
--- a/include/linux/ipv6_route.h
+++ b/include/linux/ipv6_route.h
@@ -9,54 +9,11 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IPV6_ROUTE_H
 #define _LINUX_IPV6_ROUTE_H
 
-#include <linux/types.h>
-
-#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
-#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
-					   fallback, no routers on link */
-#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
-#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
-#define RTF_ANYCAST	0x00100000	/* Anycast			*/
-
-#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
-#define RTF_EXPIRES	0x00400000
-
-#define RTF_ROUTEINFO	0x00800000	/* route information - RA	*/
-
-#define RTF_CACHE	0x01000000	/* cache entry			*/
-#define RTF_FLOW	0x02000000	/* flow significant route	*/
-#define RTF_POLICY	0x04000000	/* policy route			*/
-
-#define RTF_PREF(pref)	((pref) << 27)
-#define RTF_PREF_MASK	0x18000000
+#include <uapi/linux/ipv6_route.h>
 
-#define RTF_LOCAL	0x80000000
-
-#ifdef __KERNEL__
 #define IPV6_EXTRACT_PREF(flag)	(((flag) & RTF_PREF_MASK) >> 27)
 #define IPV6_DECODE_PREF(pref)	((pref) ^ 2)	/* 1:low,2:med,3:high */
 #endif
-
-struct in6_rtmsg {
-	struct in6_addr		rtmsg_dst;
-	struct in6_addr		rtmsg_src;
-	struct in6_addr		rtmsg_gateway;
-	__u32			rtmsg_type;
-	__u16			rtmsg_dst_len;
-	__u16			rtmsg_src_len;
-	__u32			rtmsg_metric;
-	unsigned long		rtmsg_info;
-        __u32			rtmsg_flags;
-	int			rtmsg_ifindex;
-};
-
-#define RTMSG_NEWDEVICE		0x11
-#define RTMSG_DELDEVICE		0x12
-#define RTMSG_NEWROUTE		0x21
-#define RTMSG_DELROUTE		0x22
-
-#endif
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
index 3bc4dcab6e828a16b6113c1aa1f3de08bb062c46..0a2dc46cdaf6e7070dc602fcde64a23c72553361 100644
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -1,10 +1,8 @@
 #ifndef _LINUX_IRQNR_H
 #define _LINUX_IRQNR_H
 
-/*
- * Generic irq_desc iterators:
- */
-#ifdef __KERNEL__
+#include <uapi/linux/irqnr.h>
+
 
 #ifndef CONFIG_GENERIC_HARDIRQS
 #include <asm/irq.h>
@@ -57,6 +55,4 @@ unsigned int irq_get_next_irq(unsigned int offset);
 #define for_each_irq_nr(irq)                   \
        for (irq = 0; irq < nr_irqs; irq++)
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 215c41602af80904a68ab1cfb9aedd2a2c74de93..1e9a0f2a86260b31619fbdcd7fe9aea66a1e1435 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -10,136 +10,9 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef __ISDN_H__
 #define __ISDN_H__
 
-#include <linux/ioctl.h>
-#include <linux/tty.h>
-
-#define ISDN_MAX_DRIVERS    32
-#define ISDN_MAX_CHANNELS   64
-
-/* New ioctl-codes */
-#define IIOCNETAIF  _IO('I',1)
-#define IIOCNETDIF  _IO('I',2)
-#define IIOCNETSCF  _IO('I',3)
-#define IIOCNETGCF  _IO('I',4)
-#define IIOCNETANM  _IO('I',5)
-#define IIOCNETDNM  _IO('I',6)
-#define IIOCNETGNM  _IO('I',7)
-#define IIOCGETSET  _IO('I',8) /* no longer supported */
-#define IIOCSETSET  _IO('I',9) /* no longer supported */
-#define IIOCSETVER  _IO('I',10)
-#define IIOCNETHUP  _IO('I',11)
-#define IIOCSETGST  _IO('I',12)
-#define IIOCSETBRJ  _IO('I',13)
-#define IIOCSIGPRF  _IO('I',14)
-#define IIOCGETPRF  _IO('I',15)
-#define IIOCSETPRF  _IO('I',16)
-#define IIOCGETMAP  _IO('I',17)
-#define IIOCSETMAP  _IO('I',18)
-#define IIOCNETASL  _IO('I',19)
-#define IIOCNETDIL  _IO('I',20)
-#define IIOCGETCPS  _IO('I',21)
-#define IIOCGETDVR  _IO('I',22)
-#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
-#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
-
-#define IIOCNETALN  _IO('I',32)
-#define IIOCNETDLN  _IO('I',33)
-
-#define IIOCNETGPN  _IO('I',34)
-
-#define IIOCDBGVAR  _IO('I',127)
-
-#define IIOCDRVCTL  _IO('I',128)
-
-/* cisco hdlck device private ioctls */
-#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
-#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
-#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
-#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
-
-/* Packet encapsulations for net-interfaces */
-#define ISDN_NET_ENCAP_ETHER      0
-#define ISDN_NET_ENCAP_RAWIP      1
-#define ISDN_NET_ENCAP_IPTYP      2
-#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
-#define ISDN_NET_ENCAP_SYNCPPP    4
-#define ISDN_NET_ENCAP_UIHDLC     5
-#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
-#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt */
-#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
-
-/* Facility which currently uses an ISDN-channel */
-#define ISDN_USAGE_NONE       0
-#define ISDN_USAGE_RAW        1
-#define ISDN_USAGE_MODEM      2
-#define ISDN_USAGE_NET        3
-#define ISDN_USAGE_VOICE      4
-#define ISDN_USAGE_FAX        5
-#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
-#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
-#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
-#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
-
-#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
-#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
-#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
-
-#define ISDN_MSNLEN          32
-#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
-#define TTY_DV 0x06  /* Data version for iprofd etc.          */
-
-#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
-
-typedef struct {
-  char drvid[25];
-  unsigned long arg;
-} isdn_ioctl_struct;
-
-typedef struct {
-  char name[10];
-  char phone[ISDN_MSNLEN];
-  int  outgoing;
-} isdn_net_ioctl_phone;
-
-typedef struct {
-  char name[10];     /* Name of interface                     */
-  char master[10];   /* Name of Master for Bundling           */
-  char slave[10];    /* Name of Slave for Bundling            */
-  char eaz[256];     /* EAZ/MSN                               */
-  char drvid[25];    /* DriverId for Bindings                 */
-  int  onhtime;      /* Hangup-Timeout                        */
-  int  charge;       /* Charge-Units                          */
-  int  l2_proto;     /* Layer-2 protocol                      */
-  int  l3_proto;     /* Layer-3 protocol                      */
-  int  p_encap;      /* Encapsulation                         */
-  int  exclusive;    /* Channel, if bound exclusive           */
-  int  dialmax;      /* Dial Retry-Counter                    */
-  int  slavedelay;   /* Delay until slave starts up           */
-  int  cbdelay;      /* Delay before Callback                 */
-  int  chargehup;    /* Flag: Charge-Hangup                   */
-  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
-  int  secure;       /* Flag: Secure                          */
-  int  callback;     /* Flag: Callback                        */
-  int  cbhup;        /* Flag: Reject Call before Callback     */
-  int  pppbind;      /* ippp device for bindings              */
-  int  chargeint;    /* Use fixed charge interval length      */
-  int  triggercps;   /* BogoCPS needed for triggering slave   */
-  int  dialtimeout;  /* Dial-Timeout                          */
-  int  dialwait;     /* Time to wait after failed dial        */
-  int  dialmode;     /* Flag: off / on / auto                 */
-} isdn_net_ioctl_cfg;
-
-#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
-#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
-#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
-#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
-#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
-
-#ifdef __KERNEL__
 
 #include <linux/errno.h>
 #include <linux/fs.h>
@@ -163,6 +36,7 @@ typedef struct {
 #include <linux/skbuff.h>
 #include <linux/tcp.h>
 #include <linux/mutex.h>
+#include <uapi/linux/isdn.h>
 
 #define ISDN_TTY_MAJOR    43
 #define ISDN_TTYAUX_MAJOR 44
@@ -595,6 +469,4 @@ typedef struct isdn_devt {
 extern isdn_dev *dev;
 
 
-#endif /* __KERNEL__ */
-
 #endif /* __ISDN_H__ */
diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h
index a5a50f52380784115f5a1def2e76ac103055408f..19ab361f9f07d06ded9a78c379c733eea68a537a 100644
--- a/include/linux/isdn_divertif.h
+++ b/include/linux/isdn_divertif.h
@@ -9,26 +9,12 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef _LINUX_ISDN_DIVERTIF_H
 #define _LINUX_ISDN_DIVERTIF_H
 
-/***********************************************************/
-/* magic value is also used to control version information */
-/***********************************************************/
-#define DIVERT_IF_MAGIC 0x25873401
-#define DIVERT_CMD_REG  0x00  /* register command */
-#define DIVERT_CMD_REL  0x01  /* release command */
-#define DIVERT_NO_ERR   0x00  /* return value no error */
-#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
-#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
-#define DIVERT_REG_ERR  0x03  /* module already registered */
-#define DIVERT_REL_ERR  0x04  /* module not registered */
-#define DIVERT_REG_NAME isdn_register_divert
-
-#ifdef __KERNEL__
 #include <linux/isdnif.h>
 #include <linux/types.h>
+#include <uapi/linux/isdn_divertif.h>
 
 /***************************************************************/
 /* structure exchanging data between isdn hl and divert module */
@@ -46,6 +32,4 @@ typedef struct
 /* function register */
 /*********************/
 extern int DIVERT_REG_NAME(isdn_divert_if *);
-#endif
-
 #endif /* _LINUX_ISDN_DIVERTIF_H */
diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h
index 8687a7dc0632378c4828b2c58664ec638227919d..d5f62bc5f4beb8499983d3c3a682b9c468c74b9e 100644
--- a/include/linux/isdn_ppp.h
+++ b/include/linux/isdn_ppp.h
@@ -9,68 +9,16 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef _LINUX_ISDN_PPP_H
 #define _LINUX_ISDN_PPP_H
 
-#define CALLTYPE_INCOMING 0x1
-#define CALLTYPE_OUTGOING 0x2
-#define CALLTYPE_CALLBACK 0x4
-
-#define IPPP_VERSION    "2.2.0"
-
-struct pppcallinfo
-{
-  int calltype;
-  unsigned char local_num[64];
-  unsigned char remote_num[64];
-  int charge_units;
-};
-
-#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
-#define PPPIOCBUNDLE   _IOW('t',129,int)
-#define PPPIOCGMPFLAGS _IOR('t',130,int)
-#define PPPIOCSMPFLAGS _IOW('t',131,int)
-#define PPPIOCSMPMTU   _IOW('t',132,int)
-#define PPPIOCSMPMRU   _IOW('t',133,int)
-#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
-#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
-#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
-
-
-#define SC_MP_PROT       0x00000200
-#define SC_REJ_MP_PROT   0x00000400
-#define SC_OUT_SHORT_SEQ 0x00000800
-#define SC_IN_SHORT_SEQ  0x00004000
-
-#define SC_DECOMP_ON		0x01
-#define SC_COMP_ON		0x02
-#define SC_DECOMP_DISCARD	0x04
-#define SC_COMP_DISCARD		0x08
-#define SC_LINK_DECOMP_ON	0x10
-#define SC_LINK_COMP_ON		0x20
-#define SC_LINK_DECOMP_DISCARD	0x40
-#define SC_LINK_COMP_DISCARD	0x80
-
-#define ISDN_PPP_COMP_MAX_OPTIONS 16
-
-#define IPPP_COMP_FLAG_XMIT 0x1
-#define IPPP_COMP_FLAG_LINK 0x2
-
-struct isdn_ppp_comp_data {
-  int num;
-  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
-  int optlen;
-  int flags;
-};
-
-#ifdef __KERNEL__
 
 
 
 #ifdef CONFIG_IPPP_FILTER
 #include <linux/filter.h>
 #endif
+#include <uapi/linux/isdn_ppp.h>
 
 #define DECOMP_ERR_NOMEM	(-10)
 
@@ -244,5 +192,4 @@ struct ippp_struct {
   unsigned long compflags;
 };
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_ISDN_PPP_H */
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
index b8c23f88dd549dac4d9ca981ea90a16188fc1c8b..0fc6ff276221025b4d625674023df67e72589b42 100644
--- a/include/linux/isdnif.h
+++ b/include/linux/isdnif.h
@@ -10,51 +10,12 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef __ISDNIF_H__
 #define __ISDNIF_H__
 
 
-/*
- * Values for general protocol-selection
- */
-#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
-#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
-#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
-#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
-#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
-#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
-
-/*
- * Values for Layer-2-protocol-selection
- */
-#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
-#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
-#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
-#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
-#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
-#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
-#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
-#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
-#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
-#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
-#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
-#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
-#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
-#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
-
-/*
- * Values for Layer-3-protocol-selection
- */
-#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
-#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
-#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
-#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
-#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
-
-#ifdef __KERNEL__
-
 #include <linux/skbuff.h>
+#include <uapi/linux/isdnif.h>
 
 /***************************************************************************/
 /* Extensions made by Werner Cornelius (werner@ikt.de)                     */
@@ -541,6 +502,4 @@ typedef struct {
 extern int register_isdn(isdn_if*);
 #include <asm/uaccess.h>
 
-#endif /* __KERNEL__ */
-
 #endif /* __ISDNIF_H__ */
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index 47199b13e0eb9c1f102acd1e188a23be5c53b1cc..cbf2aa9e93b9f6ac27db06af2340615c3d894b77 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -1,12 +1,8 @@
-#ifndef _LINUX_JOYSTICK_H
-#define _LINUX_JOYSTICK_H
-
 /*
  *  Copyright (C) 1996-2000 Vojtech Pavlik
  *
  *  Sponsored by SuSE
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,113 +22,11 @@
  * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
+#ifndef _LINUX_JOYSTICK_H
+#define _LINUX_JOYSTICK_H
 
-#include <linux/types.h>
-#include <linux/input.h>
-
-/*
- * Version
- */
-
-#define JS_VERSION		0x020100
-
-/*
- * Types and constants for reading from /dev/js
- */
-
-#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
-#define JS_EVENT_AXIS		0x02	/* joystick moved */
-#define JS_EVENT_INIT		0x80	/* initial state of device */
-
-struct js_event {
-	__u32 time;	/* event timestamp in milliseconds */
-	__s16 value;	/* value */
-	__u8 type;	/* event type */
-	__u8 number;	/* axis/button number */
-};
-
-/*
- * IOCTL commands for joystick driver
- */
-
-#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
-
-#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
-#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
-#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
-
-#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
-#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
-
-#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_CNT])			/* set axis mapping */
-#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_CNT])			/* get axis mapping */
-#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
-#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
-
-/*
- * Types and constants for get/set correction
- */
-
-#define JS_CORR_NONE		0x00	/* returns raw values */
-#define JS_CORR_BROKEN		0x01	/* broken line */
-
-struct js_corr {
-	__s32 coef[8];
-	__s16 prec;
-	__u16 type;
-};
-
-/*
- * v0.x compatibility definitions
- */
-
-#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
-#define JS_TRUE			1
-#define JS_FALSE		0
-#define JS_X_0			0x01
-#define JS_Y_0			0x02
-#define JS_X_1			0x04
-#define JS_Y_1			0x08
-#define JS_MAX			2
-
-#define JS_DEF_TIMEOUT		0x1300
-#define JS_DEF_CORR		0
-#define JS_DEF_TIMELIMIT	10L
-
-#define JS_SET_CAL		1
-#define JS_GET_CAL		2
-#define JS_SET_TIMEOUT		3
-#define JS_GET_TIMEOUT		4
-#define JS_SET_TIMELIMIT	5
-#define JS_GET_TIMELIMIT	6
-#define JS_GET_ALL		7
-#define JS_SET_ALL		8
-
-struct JS_DATA_TYPE {
-	__s32 buttons;
-	__s32 x;
-	__s32 y;
-};
-
-struct JS_DATA_SAVE_TYPE_32 {
-	__s32 JS_TIMEOUT;
-	__s32 BUSY;
-	__s32 JS_EXPIRETIME;
-	__s32 JS_TIMELIMIT;
-	struct JS_DATA_TYPE JS_SAVE;
-	struct JS_DATA_TYPE JS_CORR;
-};
-
-struct JS_DATA_SAVE_TYPE_64 {
-	__s32 JS_TIMEOUT;
-	__s32 BUSY;
-	__s64 JS_EXPIRETIME;
-	__s64 JS_TIMELIMIT;
-	struct JS_DATA_TYPE JS_SAVE;
-	struct JS_DATA_TYPE JS_CORR;
-};
+#include <uapi/linux/joystick.h>
 
-#ifdef __KERNEL__
 #if BITS_PER_LONG == 64
 #define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
 #elif BITS_PER_LONG == 32
@@ -140,6 +34,4 @@ struct JS_DATA_SAVE_TYPE_64 {
 #else
 #error Unexpected BITS_PER_LONG
 #endif
-#endif
-
 #endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/kd.h b/include/linux/kd.h
index c36d8476db555711a7bb921fd783f4e51c7f1359..25bd17fad239f44da6e2576413fc4a43e1342ede 100644
--- a/include/linux/kd.h
+++ b/include/linux/kd.h
@@ -1,186 +1,7 @@
 #ifndef _LINUX_KD_H
 #define _LINUX_KD_H
-#include <linux/types.h>
-#include <linux/compiler.h>
 
-/* 0x4B is 'K', to avoid collision with termios and vt */
+#include <uapi/linux/kd.h>
 
-#define GIO_FONT	0x4B60	/* gets font in expanded form */
-#define PIO_FONT	0x4B61	/* use font in expanded form */
-
-#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
-#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
-struct consolefontdesc {
-	unsigned short charcount;	/* characters in font (256 or 512) */
-	unsigned short charheight;	/* scan lines per character (1-32) */
-	char __user *chardata;		/* font data in expanded form */
-};
-
-#define PIO_FONTRESET   0x4B6D	/* reset to default font */
-
-#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
-#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
-
-#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
-#define KDMKTONE	0x4B30	/* generate tone */
-
-#define KDGETLED	0x4B31	/* return current led state */
-#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
-#define 	LED_SCR		0x01	/* scroll lock led */
-#define 	LED_NUM		0x02	/* num lock led */
-#define 	LED_CAP		0x04	/* caps lock led */
-
-#define KDGKBTYPE	0x4B33	/* get keyboard type */
-#define 	KB_84		0x01
-#define 	KB_101		0x02 	/* this is what we always answer */
-#define 	KB_OTHER	0x03
-
-#define KDADDIO		0x4B34	/* add i/o port as valid */
-#define KDDELIO		0x4B35	/* del i/o port as valid */
-#define KDENABIO	0x4B36	/* enable i/o to video board */
-#define KDDISABIO	0x4B37	/* disable i/o to video board */
-
-#define KDSETMODE	0x4B3A	/* set text/graphics mode */
-#define		KD_TEXT		0x00
-#define		KD_GRAPHICS	0x01
-#define		KD_TEXT0	0x02	/* obsolete */
-#define		KD_TEXT1	0x03	/* obsolete */
-#define KDGETMODE	0x4B3B	/* get current mode */
-
-#define KDMAPDISP	0x4B3C	/* map display into address space */
-#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
-
-typedef char scrnmap_t;
-#define		E_TABSZ		256
-#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
-#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
-#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
-#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
-
-#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
-struct unipair {
-	unsigned short unicode;
-	unsigned short fontpos;
-};
-struct unimapdesc {
-	unsigned short entry_ct;
-	struct unipair __user *entries;
-};
-#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
-#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
-struct unimapinit {
-	unsigned short advised_hashsize;  /* 0 if no opinion */
-	unsigned short advised_hashstep;  /* 0 if no opinion */
-	unsigned short advised_hashlevel; /* 0 if no opinion */
-};
-
-#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
-#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
-
-#define		K_RAW		0x00
-#define		K_XLATE		0x01
-#define		K_MEDIUMRAW	0x02
-#define		K_UNICODE	0x03
-#define		K_OFF		0x04
-#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
-#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
-
-#define		K_METABIT	0x03
-#define		K_ESCPREFIX	0x04
-#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
-#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
-
-#define		K_SCROLLLOCK	0x01
-#define		K_NUMLOCK	0x02
-#define		K_CAPSLOCK	0x04
-#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
-#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
-
-struct kbentry {
-	unsigned char kb_table;
-	unsigned char kb_index;
-	unsigned short kb_value;
-};
-#define		K_NORMTAB	0x00
-#define		K_SHIFTTAB	0x01
-#define		K_ALTTAB	0x02
-#define		K_ALTSHIFTTAB	0x03
-
-#define KDGKBENT	0x4B46	/* gets one entry in translation table */
-#define KDSKBENT	0x4B47	/* sets one entry in translation table */
-
-struct kbsentry {
-	unsigned char kb_func;
-	unsigned char kb_string[512];
-};
-#define KDGKBSENT	0x4B48	/* gets one function key string entry */
-#define KDSKBSENT	0x4B49	/* sets one function key string entry */
-
-struct kbdiacr {
-        unsigned char diacr, base, result;
-};
-struct kbdiacrs {
-        unsigned int kb_cnt;    /* number of entries in following array */
-	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
-#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
-
-struct kbdiacruc {
-	unsigned int diacr, base, result;
-};
-struct kbdiacrsuc {
-        unsigned int kb_cnt;    /* number of entries in following array */
-	struct kbdiacruc kbdiacruc[256];    /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACRUC    0x4BFA  /* read kernel accent table - UCS */
-#define KDSKBDIACRUC    0x4BFB  /* write kernel accent table - UCS */
-
-struct kbkeycode {
-	unsigned int scancode, keycode;
-};
-#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
-#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
-
-#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
-
-struct kbd_repeat {
-	int delay;	/* in msec; <= 0: don't change */
-	int period;	/* in msec; <= 0: don't change */
-			/* earlier this field was misnamed "rate" */
-};
-
-#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
-				 * actually used values are returned */
-
-#define KDFONTOP	0x4B72	/* font operations */
-
-struct console_font_op {
-	unsigned int op;	/* operation code KD_FONT_OP_* */
-	unsigned int flags;	/* KD_FONT_FLAG_* */
-	unsigned int width, height;	/* font size */
-	unsigned int charcount;
-	unsigned char __user *data;	/* font data with height fixed to 32 */
-};
-
-struct console_font {
-	unsigned int width, height;	/* font size */
-	unsigned int charcount;
-	unsigned char *data;	/* font data with height fixed to 32 */
-};
-
-#define KD_FONT_OP_SET		0	/* Set font */
-#define KD_FONT_OP_GET		1	/* Get font */
-#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
-#define KD_FONT_OP_COPY		3	/* Copy from another console */
-
-#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
-#ifdef __KERNEL__
 #define KD_FONT_FLAG_OLD		0x80000000	/* Invoked via old interface [compat] */
-#endif
-
-/* note: 0x4B00-0x4B4E all have had a value at some time;
-   don't reuse for the time being */
-/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
-
 #endif /* _LINUX_KD_H */
diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h
index 2dacab8beccb9753aa8d3c6b0307636eece13758..c838abe3ee0a80dfccfb2bfbf1bc1e5067fa9dca 100644
--- a/include/linux/kdev_t.h
+++ b/include/linux/kdev_t.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_KDEV_T_H
 #define _LINUX_KDEV_T_H
-#ifdef __KERNEL__
+
+#include <uapi/linux/kdev_t.h>
+
 #define MINORBITS	20
 #define MINORMASK	((1U << MINORBITS) - 1)
 
@@ -87,14 +89,4 @@ static inline unsigned sysv_minor(u32 dev)
 	return dev & 0x3ffff;
 }
 
-#else /* __KERNEL__ */
-
-/*
-Some programs want their definitions of MAJOR and MINOR and MKDEV
-from the kernel sources. These must be the externally visible ones.
-*/
-#define MAJOR(dev)	((dev)>>8)
-#define MINOR(dev)	((dev) & 0xff)
-#define MKDEV(ma,mi)	((ma)<<8 | (mi))
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h
index a1bdf6966357b6b914d101c7545ef306fa395bdb..546eb6a76934ba9fa515e81d43893deea0dddfe6 100644
--- a/include/linux/kernel-page-flags.h
+++ b/include/linux/kernel-page-flags.h
@@ -1,38 +1,8 @@
 #ifndef LINUX_KERNEL_PAGE_FLAGS_H
 #define LINUX_KERNEL_PAGE_FLAGS_H
 
-/*
- * Stable page flag bits exported to user space
- */
-
-#define KPF_LOCKED		0
-#define KPF_ERROR		1
-#define KPF_REFERENCED		2
-#define KPF_UPTODATE		3
-#define KPF_DIRTY		4
-#define KPF_LRU			5
-#define KPF_ACTIVE		6
-#define KPF_SLAB		7
-#define KPF_WRITEBACK		8
-#define KPF_RECLAIM		9
-#define KPF_BUDDY		10
-
-/* 11-20: new additions in 2.6.31 */
-#define KPF_MMAP		11
-#define KPF_ANON		12
-#define KPF_SWAPCACHE		13
-#define KPF_SWAPBACKED		14
-#define KPF_COMPOUND_HEAD	15
-#define KPF_COMPOUND_TAIL	16
-#define KPF_HUGE		17
-#define KPF_UNEVICTABLE		18
-#define KPF_HWPOISON		19
-#define KPF_NOPAGE		20
+#include <uapi/linux/kernel-page-flags.h>
 
-#define KPF_KSM			21
-#define KPF_THP			22
-
-#ifdef __KERNEL__
 
 /* kernel hacking assistances
  * WARNING: subject to change, never rely on them!
@@ -46,6 +16,4 @@
 #define KPF_ARCH		38
 #define KPF_UNCACHED		39
 
-#endif /* __KERNEL__ */
-
 #endif /* LINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 2451f1f7a1d969f29bb2a3137c846566bfaf614a..a123b13b70fd80cb12def4c100ee198606b7c6b6 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -1,15 +1,6 @@
 #ifndef _LINUX_KERNEL_H
 #define _LINUX_KERNEL_H
 
-#include <linux/sysinfo.h>
-
-/*
- * 'kernel.h' contains some often-used function prototypes etc
- */
-#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
-
-#ifdef __KERNEL__
 
 #include <stdarg.h>
 #include <linux/linkage.h>
@@ -22,6 +13,7 @@
 #include <linux/printk.h>
 #include <linux/dynamic_debug.h>
 #include <asm/byteorder.h>
+#include <uapi/linux/kernel.h>
 
 #define USHRT_MAX	((u16)(~0U))
 #define SHRT_MAX	((s16)(USHRT_MAX>>1))
@@ -716,6 +708,4 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
 
 extern int do_sysinfo(struct sysinfo *info);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h
index 9c2683929fd3506778507af74e099073aaa3d9a9..9be37da93680a4d688c339a93135e1afa974f791 100644
--- a/include/linux/kernelcapi.h
+++ b/include/linux/kernelcapi.h
@@ -6,49 +6,15 @@
  * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
  * 
  */
-
 #ifndef __KERNELCAPI_H__
 #define __KERNELCAPI_H__
 
-#define CAPI_MAXAPPL	240	/* maximum number of applications  */
-#define CAPI_MAXCONTR	32	/* maximum number of controller    */
-#define CAPI_MAXDATAWINDOW	8
-
-
-typedef struct kcapi_flagdef {
-	int contr;
-	int flag;
-} kcapi_flagdef;
-
-typedef struct kcapi_carddef {
-	char		driver[32];
-	unsigned int	port;
-	unsigned	irq;
-	unsigned int	membase;
-	int		cardnr;
-} kcapi_carddef;
-
-/* new ioctls >= 10 */
-#define KCAPI_CMD_TRACE		10
-#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
-
-/* 
- * flag > 2 => trace also data
- * flag & 1 => show trace
- */
-#define KCAPI_TRACE_OFF			0
-#define KCAPI_TRACE_SHORT_NO_DATA	1
-#define KCAPI_TRACE_FULL_NO_DATA	2
-#define KCAPI_TRACE_SHORT		3
-#define KCAPI_TRACE_FULL		4
-
-
-#ifdef __KERNEL__
 
 #include <linux/list.h>
 #include <linux/skbuff.h>
 #include <linux/workqueue.h>
 #include <linux/notifier.h>
+#include <uapi/linux/kernelcapi.h>
 
 struct capi20_appl {
 	u16 applid;
@@ -150,6 +116,4 @@ typedef enum {
 	CapiCallGivenToOtherApplication                 = 0x3304,
 } CAPI_REASON;
 
-#endif				/* __KERNEL__ */
-
 #endif				/* __KERNELCAPI_H__ */
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 37c5f7261142c24fa582121d2bdfd9479285f681..d0b8458a703a25503bcfe75f39ef804f36636aea 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -1,57 +1,8 @@
 #ifndef LINUX_KEXEC_H
 #define LINUX_KEXEC_H
 
-/* kexec system call -  It loads the new kernel to boot into.
- * kexec does not sync, or unmount filesystems so if you need
- * that to happen you need to do that yourself.
- */
-
-#include <linux/types.h>
-
-/* kexec flags for different usage scenarios */
-#define KEXEC_ON_CRASH		0x00000001
-#define KEXEC_PRESERVE_CONTEXT	0x00000002
-#define KEXEC_ARCH_MASK		0xffff0000
-
-/* These values match the ELF architecture values.
- * Unless there is a good reason that should continue to be the case.
- */
-#define KEXEC_ARCH_DEFAULT ( 0 << 16)
-#define KEXEC_ARCH_386     ( 3 << 16)
-#define KEXEC_ARCH_X86_64  (62 << 16)
-#define KEXEC_ARCH_PPC     (20 << 16)
-#define KEXEC_ARCH_PPC64   (21 << 16)
-#define KEXEC_ARCH_IA_64   (50 << 16)
-#define KEXEC_ARCH_ARM     (40 << 16)
-#define KEXEC_ARCH_S390    (22 << 16)
-#define KEXEC_ARCH_SH      (42 << 16)
-#define KEXEC_ARCH_MIPS_LE (10 << 16)
-#define KEXEC_ARCH_MIPS    ( 8 << 16)
-
-/* The artificial cap on the number of segments passed to kexec_load. */
-#define KEXEC_SEGMENT_MAX 16
-
-#ifndef __KERNEL__
-/*
- * This structure is used to hold the arguments that are used when
- * loading  kernel binaries.
- */
-struct kexec_segment {
-	const void *buf;
-	size_t bufsz;
-	const void *mem;
-	size_t memsz;
-};
-
-/* Load a new kernel image as described by the kexec_segment array
- * consisting of passed number of segments at the entry-point address.
- * The flags allow different useage types.
- */
-extern int kexec_load(void *, size_t, struct kexec_segment *,
-		unsigned long int);
-#endif /* __KERNEL__ */
+#include <uapi/linux/kexec.h>
 
-#ifdef __KERNEL__
 #ifdef CONFIG_KEXEC
 #include <linux/list.h>
 #include <linux/linkage.h>
@@ -258,5 +209,4 @@ struct task_struct;
 static inline void crash_kexec(struct pt_regs *regs) { }
 static inline int kexec_should_crash(struct task_struct *p) { return 0; }
 #endif /* CONFIG_KEXEC */
-#endif /* __KERNEL__ */
 #endif /* LINUX_KEXEC_H */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index 86e5214ae73508649099a2133e7fd654f2acc033..131ed5146521cd609488c2dc2d65620fdd96386f 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -1,28 +1,8 @@
 #ifndef __LINUX_KEYBOARD_H
 #define __LINUX_KEYBOARD_H
 
-#include <linux/wait.h>
+#include <uapi/linux/keyboard.h>
 
-#define KG_SHIFT	0
-#define KG_CTRL		2
-#define KG_ALT		3
-#define KG_ALTGR	1
-#define KG_SHIFTL	4
-#define KG_KANASHIFT	4
-#define KG_SHIFTR	5
-#define KG_CTRLL	6
-#define KG_CTRLR	7
-#define KG_CAPSSHIFT	8
-
-#define NR_SHIFT	9
-
-#define NR_KEYS		256
-#define MAX_NR_KEYMAPS	256
-/* This means 128Kb if all keymaps are allocated. Only the superuser
-	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
-#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
-
-#ifdef __KERNEL__
 struct notifier_block;
 extern unsigned short *key_maps[MAX_NR_KEYMAPS];
 extern unsigned short plain_map[NR_KEYS];
@@ -38,422 +18,3 @@ struct keyboard_notifier_param {
 extern int register_keyboard_notifier(struct notifier_block *nb);
 extern int unregister_keyboard_notifier(struct notifier_block *nb);
 #endif
-
-#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
-
-#define KT_LATIN	0	/* we depend on this being zero */
-#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
-#define KT_FN		1
-#define KT_SPEC		2
-#define KT_PAD		3
-#define KT_DEAD		4
-#define KT_CONS		5
-#define KT_CUR		6
-#define KT_SHIFT	7
-#define KT_META		8
-#define KT_ASCII	9
-#define KT_LOCK		10
-#define KT_SLOCK	12
-#define KT_DEAD2	13
-#define KT_BRL		14
-
-#define K(t,v)		(((t)<<8)|(v))
-#define KTYP(x)		((x) >> 8)
-#define KVAL(x)		((x) & 0xff)
-
-#define K_F1		K(KT_FN,0)
-#define K_F2		K(KT_FN,1)
-#define K_F3		K(KT_FN,2)
-#define K_F4		K(KT_FN,3)
-#define K_F5		K(KT_FN,4)
-#define K_F6		K(KT_FN,5)
-#define K_F7		K(KT_FN,6)
-#define K_F8		K(KT_FN,7)
-#define K_F9		K(KT_FN,8)
-#define K_F10		K(KT_FN,9)
-#define K_F11		K(KT_FN,10)
-#define K_F12		K(KT_FN,11)
-#define K_F13		K(KT_FN,12)
-#define K_F14		K(KT_FN,13)
-#define K_F15		K(KT_FN,14)
-#define K_F16		K(KT_FN,15)
-#define K_F17		K(KT_FN,16)
-#define K_F18		K(KT_FN,17)
-#define K_F19		K(KT_FN,18)
-#define K_F20		K(KT_FN,19)
-#define K_FIND		K(KT_FN,20)
-#define K_INSERT	K(KT_FN,21)
-#define K_REMOVE	K(KT_FN,22)
-#define K_SELECT	K(KT_FN,23)
-#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
-#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
-#define K_MACRO	 	K(KT_FN,26)
-#define K_HELP		K(KT_FN,27)
-#define K_DO		K(KT_FN,28)
-#define K_PAUSE	 	K(KT_FN,29)
-#define K_F21		K(KT_FN,30)
-#define K_F22		K(KT_FN,31)
-#define K_F23		K(KT_FN,32)
-#define K_F24		K(KT_FN,33)
-#define K_F25		K(KT_FN,34)
-#define K_F26		K(KT_FN,35)
-#define K_F27		K(KT_FN,36)
-#define K_F28		K(KT_FN,37)
-#define K_F29		K(KT_FN,38)
-#define K_F30		K(KT_FN,39)
-#define K_F31		K(KT_FN,40)
-#define K_F32		K(KT_FN,41)
-#define K_F33		K(KT_FN,42)
-#define K_F34		K(KT_FN,43)
-#define K_F35		K(KT_FN,44)
-#define K_F36		K(KT_FN,45)
-#define K_F37		K(KT_FN,46)
-#define K_F38		K(KT_FN,47)
-#define K_F39		K(KT_FN,48)
-#define K_F40		K(KT_FN,49)
-#define K_F41		K(KT_FN,50)
-#define K_F42		K(KT_FN,51)
-#define K_F43		K(KT_FN,52)
-#define K_F44		K(KT_FN,53)
-#define K_F45		K(KT_FN,54)
-#define K_F46		K(KT_FN,55)
-#define K_F47		K(KT_FN,56)
-#define K_F48		K(KT_FN,57)
-#define K_F49		K(KT_FN,58)
-#define K_F50		K(KT_FN,59)
-#define K_F51		K(KT_FN,60)
-#define K_F52		K(KT_FN,61)
-#define K_F53		K(KT_FN,62)
-#define K_F54		K(KT_FN,63)
-#define K_F55		K(KT_FN,64)
-#define K_F56		K(KT_FN,65)
-#define K_F57		K(KT_FN,66)
-#define K_F58		K(KT_FN,67)
-#define K_F59		K(KT_FN,68)
-#define K_F60		K(KT_FN,69)
-#define K_F61		K(KT_FN,70)
-#define K_F62		K(KT_FN,71)
-#define K_F63		K(KT_FN,72)
-#define K_F64		K(KT_FN,73)
-#define K_F65		K(KT_FN,74)
-#define K_F66		K(KT_FN,75)
-#define K_F67		K(KT_FN,76)
-#define K_F68		K(KT_FN,77)
-#define K_F69		K(KT_FN,78)
-#define K_F70		K(KT_FN,79)
-#define K_F71		K(KT_FN,80)
-#define K_F72		K(KT_FN,81)
-#define K_F73		K(KT_FN,82)
-#define K_F74		K(KT_FN,83)
-#define K_F75		K(KT_FN,84)
-#define K_F76		K(KT_FN,85)
-#define K_F77		K(KT_FN,86)
-#define K_F78		K(KT_FN,87)
-#define K_F79		K(KT_FN,88)
-#define K_F80		K(KT_FN,89)
-#define K_F81		K(KT_FN,90)
-#define K_F82		K(KT_FN,91)
-#define K_F83		K(KT_FN,92)
-#define K_F84		K(KT_FN,93)
-#define K_F85		K(KT_FN,94)
-#define K_F86		K(KT_FN,95)
-#define K_F87		K(KT_FN,96)
-#define K_F88		K(KT_FN,97)
-#define K_F89		K(KT_FN,98)
-#define K_F90		K(KT_FN,99)
-#define K_F91		K(KT_FN,100)
-#define K_F92		K(KT_FN,101)
-#define K_F93		K(KT_FN,102)
-#define K_F94		K(KT_FN,103)
-#define K_F95		K(KT_FN,104)
-#define K_F96		K(KT_FN,105)
-#define K_F97		K(KT_FN,106)
-#define K_F98		K(KT_FN,107)
-#define K_F99		K(KT_FN,108)
-#define K_F100		K(KT_FN,109)
-#define K_F101		K(KT_FN,110)
-#define K_F102		K(KT_FN,111)
-#define K_F103		K(KT_FN,112)
-#define K_F104		K(KT_FN,113)
-#define K_F105		K(KT_FN,114)
-#define K_F106		K(KT_FN,115)
-#define K_F107		K(KT_FN,116)
-#define K_F108		K(KT_FN,117)
-#define K_F109		K(KT_FN,118)
-#define K_F110		K(KT_FN,119)
-#define K_F111		K(KT_FN,120)
-#define K_F112		K(KT_FN,121)
-#define K_F113		K(KT_FN,122)
-#define K_F114		K(KT_FN,123)
-#define K_F115		K(KT_FN,124)
-#define K_F116		K(KT_FN,125)
-#define K_F117		K(KT_FN,126)
-#define K_F118		K(KT_FN,127)
-#define K_F119		K(KT_FN,128)
-#define K_F120		K(KT_FN,129)
-#define K_F121		K(KT_FN,130)
-#define K_F122		K(KT_FN,131)
-#define K_F123		K(KT_FN,132)
-#define K_F124		K(KT_FN,133)
-#define K_F125		K(KT_FN,134)
-#define K_F126		K(KT_FN,135)
-#define K_F127		K(KT_FN,136)
-#define K_F128		K(KT_FN,137)
-#define K_F129		K(KT_FN,138)
-#define K_F130		K(KT_FN,139)
-#define K_F131		K(KT_FN,140)
-#define K_F132		K(KT_FN,141)
-#define K_F133		K(KT_FN,142)
-#define K_F134		K(KT_FN,143)
-#define K_F135		K(KT_FN,144)
-#define K_F136		K(KT_FN,145)
-#define K_F137		K(KT_FN,146)
-#define K_F138		K(KT_FN,147)
-#define K_F139		K(KT_FN,148)
-#define K_F140		K(KT_FN,149)
-#define K_F141		K(KT_FN,150)
-#define K_F142		K(KT_FN,151)
-#define K_F143		K(KT_FN,152)
-#define K_F144		K(KT_FN,153)
-#define K_F145		K(KT_FN,154)
-#define K_F146		K(KT_FN,155)
-#define K_F147		K(KT_FN,156)
-#define K_F148		K(KT_FN,157)
-#define K_F149		K(KT_FN,158)
-#define K_F150		K(KT_FN,159)
-#define K_F151		K(KT_FN,160)
-#define K_F152		K(KT_FN,161)
-#define K_F153		K(KT_FN,162)
-#define K_F154		K(KT_FN,163)
-#define K_F155		K(KT_FN,164)
-#define K_F156		K(KT_FN,165)
-#define K_F157		K(KT_FN,166)
-#define K_F158		K(KT_FN,167)
-#define K_F159		K(KT_FN,168)
-#define K_F160		K(KT_FN,169)
-#define K_F161		K(KT_FN,170)
-#define K_F162		K(KT_FN,171)
-#define K_F163		K(KT_FN,172)
-#define K_F164		K(KT_FN,173)
-#define K_F165		K(KT_FN,174)
-#define K_F166		K(KT_FN,175)
-#define K_F167		K(KT_FN,176)
-#define K_F168		K(KT_FN,177)
-#define K_F169		K(KT_FN,178)
-#define K_F170		K(KT_FN,179)
-#define K_F171		K(KT_FN,180)
-#define K_F172		K(KT_FN,181)
-#define K_F173		K(KT_FN,182)
-#define K_F174		K(KT_FN,183)
-#define K_F175		K(KT_FN,184)
-#define K_F176		K(KT_FN,185)
-#define K_F177		K(KT_FN,186)
-#define K_F178		K(KT_FN,187)
-#define K_F179		K(KT_FN,188)
-#define K_F180		K(KT_FN,189)
-#define K_F181		K(KT_FN,190)
-#define K_F182		K(KT_FN,191)
-#define K_F183		K(KT_FN,192)
-#define K_F184		K(KT_FN,193)
-#define K_F185		K(KT_FN,194)
-#define K_F186		K(KT_FN,195)
-#define K_F187		K(KT_FN,196)
-#define K_F188		K(KT_FN,197)
-#define K_F189		K(KT_FN,198)
-#define K_F190		K(KT_FN,199)
-#define K_F191		K(KT_FN,200)
-#define K_F192		K(KT_FN,201)
-#define K_F193		K(KT_FN,202)
-#define K_F194		K(KT_FN,203)
-#define K_F195		K(KT_FN,204)
-#define K_F196		K(KT_FN,205)
-#define K_F197		K(KT_FN,206)
-#define K_F198		K(KT_FN,207)
-#define K_F199		K(KT_FN,208)
-#define K_F200		K(KT_FN,209)
-#define K_F201		K(KT_FN,210)
-#define K_F202		K(KT_FN,211)
-#define K_F203		K(KT_FN,212)
-#define K_F204		K(KT_FN,213)
-#define K_F205		K(KT_FN,214)
-#define K_F206		K(KT_FN,215)
-#define K_F207		K(KT_FN,216)
-#define K_F208		K(KT_FN,217)
-#define K_F209		K(KT_FN,218)
-#define K_F210		K(KT_FN,219)
-#define K_F211		K(KT_FN,220)
-#define K_F212		K(KT_FN,221)
-#define K_F213		K(KT_FN,222)
-#define K_F214		K(KT_FN,223)
-#define K_F215		K(KT_FN,224)
-#define K_F216		K(KT_FN,225)
-#define K_F217		K(KT_FN,226)
-#define K_F218		K(KT_FN,227)
-#define K_F219		K(KT_FN,228)
-#define K_F220		K(KT_FN,229)
-#define K_F221		K(KT_FN,230)
-#define K_F222		K(KT_FN,231)
-#define K_F223		K(KT_FN,232)
-#define K_F224		K(KT_FN,233)
-#define K_F225		K(KT_FN,234)
-#define K_F226		K(KT_FN,235)
-#define K_F227		K(KT_FN,236)
-#define K_F228		K(KT_FN,237)
-#define K_F229		K(KT_FN,238)
-#define K_F230		K(KT_FN,239)
-#define K_F231		K(KT_FN,240)
-#define K_F232		K(KT_FN,241)
-#define K_F233		K(KT_FN,242)
-#define K_F234		K(KT_FN,243)
-#define K_F235		K(KT_FN,244)
-#define K_F236		K(KT_FN,245)
-#define K_F237		K(KT_FN,246)
-#define K_F238		K(KT_FN,247)
-#define K_F239		K(KT_FN,248)
-#define K_F240		K(KT_FN,249)
-#define K_F241		K(KT_FN,250)
-#define K_F242		K(KT_FN,251)
-#define K_F243		K(KT_FN,252)
-#define K_F244		K(KT_FN,253)
-#define K_F245		K(KT_FN,254)
-#define K_UNDO		K(KT_FN,255)
-
-
-#define K_HOLE		K(KT_SPEC,0)
-#define K_ENTER		K(KT_SPEC,1)
-#define K_SH_REGS	K(KT_SPEC,2)
-#define K_SH_MEM	K(KT_SPEC,3)
-#define K_SH_STAT	K(KT_SPEC,4)
-#define K_BREAK		K(KT_SPEC,5)
-#define K_CONS		K(KT_SPEC,6)
-#define K_CAPS		K(KT_SPEC,7)
-#define K_NUM		K(KT_SPEC,8)
-#define K_HOLD		K(KT_SPEC,9)
-#define K_SCROLLFORW	K(KT_SPEC,10)
-#define K_SCROLLBACK	K(KT_SPEC,11)
-#define K_BOOT		K(KT_SPEC,12)
-#define K_CAPSON	K(KT_SPEC,13)
-#define K_COMPOSE	K(KT_SPEC,14)
-#define K_SAK		K(KT_SPEC,15)
-#define K_DECRCONSOLE	K(KT_SPEC,16)
-#define K_INCRCONSOLE	K(KT_SPEC,17)
-#define K_SPAWNCONSOLE	K(KT_SPEC,18)
-#define K_BARENUMLOCK	K(KT_SPEC,19)
-
-#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
-#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
-
-#define K_P0		K(KT_PAD,0)
-#define K_P1		K(KT_PAD,1)
-#define K_P2		K(KT_PAD,2)
-#define K_P3		K(KT_PAD,3)
-#define K_P4		K(KT_PAD,4)
-#define K_P5		K(KT_PAD,5)
-#define K_P6		K(KT_PAD,6)
-#define K_P7		K(KT_PAD,7)
-#define K_P8		K(KT_PAD,8)
-#define K_P9		K(KT_PAD,9)
-#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
-#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
-#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
-#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
-#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
-#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
-#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
-#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
-#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
-#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
-
-#define NR_PAD		20
-
-#define K_DGRAVE	K(KT_DEAD,0)
-#define K_DACUTE	K(KT_DEAD,1)
-#define K_DCIRCM	K(KT_DEAD,2)
-#define K_DTILDE	K(KT_DEAD,3)
-#define K_DDIERE	K(KT_DEAD,4)
-#define K_DCEDIL	K(KT_DEAD,5)
-
-#define NR_DEAD		6
-
-#define K_DOWN		K(KT_CUR,0)
-#define K_LEFT		K(KT_CUR,1)
-#define K_RIGHT		K(KT_CUR,2)
-#define K_UP		K(KT_CUR,3)
-
-#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
-#define K_CTRL		K(KT_SHIFT,KG_CTRL)
-#define K_ALT		K(KT_SHIFT,KG_ALT)
-#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
-#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
-#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
-#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
-#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
-#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
-
-#define K_ASC0		K(KT_ASCII,0)
-#define K_ASC1		K(KT_ASCII,1)
-#define K_ASC2		K(KT_ASCII,2)
-#define K_ASC3		K(KT_ASCII,3)
-#define K_ASC4		K(KT_ASCII,4)
-#define K_ASC5		K(KT_ASCII,5)
-#define K_ASC6		K(KT_ASCII,6)
-#define K_ASC7		K(KT_ASCII,7)
-#define K_ASC8		K(KT_ASCII,8)
-#define K_ASC9		K(KT_ASCII,9)
-#define K_HEX0		K(KT_ASCII,10)
-#define K_HEX1		K(KT_ASCII,11)
-#define K_HEX2		K(KT_ASCII,12)
-#define K_HEX3		K(KT_ASCII,13)
-#define K_HEX4		K(KT_ASCII,14)
-#define K_HEX5		K(KT_ASCII,15)
-#define K_HEX6		K(KT_ASCII,16)
-#define K_HEX7		K(KT_ASCII,17)
-#define K_HEX8		K(KT_ASCII,18)
-#define K_HEX9		K(KT_ASCII,19)
-#define K_HEXa		K(KT_ASCII,20)
-#define K_HEXb		K(KT_ASCII,21)
-#define K_HEXc		K(KT_ASCII,22)
-#define K_HEXd		K(KT_ASCII,23)
-#define K_HEXe		K(KT_ASCII,24)
-#define K_HEXf		K(KT_ASCII,25)
-
-#define NR_ASCII	26
-
-#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
-#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
-#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
-#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
-#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
-#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
-#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
-#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
-#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
-
-#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
-#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
-#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
-#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
-#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
-#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
-#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
-#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
-#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
-
-#define NR_LOCK		9
-
-#define K_BRL_BLANK     K(KT_BRL, 0)
-#define K_BRL_DOT1      K(KT_BRL, 1)
-#define K_BRL_DOT2      K(KT_BRL, 2)
-#define K_BRL_DOT3      K(KT_BRL, 3)
-#define K_BRL_DOT4      K(KT_BRL, 4)
-#define K_BRL_DOT5      K(KT_BRL, 5)
-#define K_BRL_DOT6      K(KT_BRL, 6)
-#define K_BRL_DOT7      K(KT_BRL, 7)
-#define K_BRL_DOT8      K(KT_BRL, 8)
-#define K_BRL_DOT9      K(KT_BRL, 9)
-#define K_BRL_DOT10     K(KT_BRL, 10)
-
-#define NR_BRL		11
-
-#define MAX_DIACR	256
-#endif
diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h
index ff476ddaf3103cc02e5688bc00528e7d042af891..00a97bb905db03a007450351441c823b8fa19112 100644
--- a/include/linux/kvm_para.h
+++ b/include/linux/kvm_para.h
@@ -1,31 +1,8 @@
 #ifndef __LINUX_KVM_PARA_H
 #define __LINUX_KVM_PARA_H
 
-/*
- * This header file provides a method for making a hypercall to the host
- * Architectures should define:
- * - kvm_hypercall0, kvm_hypercall1...
- * - kvm_arch_para_features
- * - kvm_para_available
- */
+#include <uapi/linux/kvm_para.h>
 
-/* Return values for hypercalls */
-#define KVM_ENOSYS		1000
-#define KVM_EFAULT		EFAULT
-#define KVM_E2BIG		E2BIG
-#define KVM_EPERM		EPERM
-
-#define KVM_HC_VAPIC_POLL_IRQ		1
-#define KVM_HC_MMU_OP			2
-#define KVM_HC_FEATURES			3
-#define KVM_HC_PPC_MAP_MAGIC_PAGE	4
-
-/*
- * hypercalls use architecture specific
- */
-#include <asm/kvm_para.h>
-
-#ifdef __KERNEL__
 
 static inline int kvm_para_has_feature(unsigned int feature)
 {
@@ -33,5 +10,4 @@ static inline int kvm_para_has_feature(unsigned int feature)
 		return 1;
 	return 0;
 }
-#endif /* __KERNEL__ */
 #endif /* __LINUX_KVM_PARA_H */
diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h
index 7eab668f60f32a0b4a18adc752fb053ec5af1086..bffdb962f1a6cba216e1c9ec9ba13acb878f4a3a 100644
--- a/include/linux/l2tp.h
+++ b/include/linux/l2tp.h
@@ -3,181 +3,11 @@
  *
  * Author: James Chapman <jchapman@katalix.com>
  */
-
 #ifndef _LINUX_L2TP_H_
 #define _LINUX_L2TP_H_
 
-#include <linux/types.h>
-#include <linux/socket.h>
-#ifdef __KERNEL__
 #include <linux/in.h>
 #include <linux/in6.h>
-#else
-#include <netinet/in.h>
-#endif
-
-#define IPPROTO_L2TP		115
-
-/**
- * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
- * @l2tp_family:  address family number AF_L2TPIP.
- * @l2tp_addr:    protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
-struct sockaddr_l2tpip {
-	/* The first fields must match struct sockaddr_in */
-	__kernel_sa_family_t l2tp_family; /* AF_INET */
-	__be16		l2tp_unused;	/* INET port number (unused) */
-	struct in_addr	l2tp_addr;	/* Internet address */
-
-	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
-
-	/* Pad to size of `struct sockaddr'. */
-	unsigned char	__pad[sizeof(struct sockaddr) -
-			      sizeof(__kernel_sa_family_t) -
-			      sizeof(__be16) - sizeof(struct in_addr) -
-			      sizeof(__u32)];
-};
-
-/**
- * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
- * @l2tp_family:  address family number AF_L2TPIP.
- * @l2tp_addr:    protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-struct sockaddr_l2tpip6 {
-	/* The first fields must match struct sockaddr_in6 */
-	__kernel_sa_family_t l2tp_family; /* AF_INET6 */
-	__be16		l2tp_unused;	/* INET port number (unused) */
-	__be32		l2tp_flowinfo;	/* IPv6 flow information */
-	struct in6_addr	l2tp_addr;	/* IPv6 address */
-	__u32		l2tp_scope_id;	/* scope id (new in RFC2553) */
-	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
-};
-
-/*****************************************************************************
- *  NETLINK_GENERIC netlink family.
- *****************************************************************************/
-
-/*
- * Commands.
- * Valid TLVs of each command are:-
- * TUNNEL_CREATE	- CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
- * TUNNEL_DELETE	- CONN_ID
- * TUNNEL_MODIFY	- CONN_ID, udpcsum
- * TUNNEL_GETSTATS	- CONN_ID, (stats)
- * TUNNEL_GET		- CONN_ID, (...)
- * SESSION_CREATE	- SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
- * SESSION_DELETE	- SESSION_ID
- * SESSION_MODIFY	- SESSION_ID, data_seq
- * SESSION_GET		- SESSION_ID, (...)
- * SESSION_GETSTATS	- SESSION_ID, (stats)
- *
- */
-enum {
-	L2TP_CMD_NOOP,
-	L2TP_CMD_TUNNEL_CREATE,
-	L2TP_CMD_TUNNEL_DELETE,
-	L2TP_CMD_TUNNEL_MODIFY,
-	L2TP_CMD_TUNNEL_GET,
-	L2TP_CMD_SESSION_CREATE,
-	L2TP_CMD_SESSION_DELETE,
-	L2TP_CMD_SESSION_MODIFY,
-	L2TP_CMD_SESSION_GET,
-	__L2TP_CMD_MAX,
-};
-
-#define L2TP_CMD_MAX			(__L2TP_CMD_MAX - 1)
-
-/*
- * ATTR types defined for L2TP
- */
-enum {
-	L2TP_ATTR_NONE,			/* no data */
-	L2TP_ATTR_PW_TYPE,		/* u16, enum l2tp_pwtype */
-	L2TP_ATTR_ENCAP_TYPE,		/* u16, enum l2tp_encap_type */
-	L2TP_ATTR_OFFSET,		/* u16 */
-	L2TP_ATTR_DATA_SEQ,		/* u16 */
-	L2TP_ATTR_L2SPEC_TYPE,		/* u8, enum l2tp_l2spec_type */
-	L2TP_ATTR_L2SPEC_LEN,		/* u8, enum l2tp_l2spec_type */
-	L2TP_ATTR_PROTO_VERSION,	/* u8 */
-	L2TP_ATTR_IFNAME,		/* string */
-	L2TP_ATTR_CONN_ID,		/* u32 */
-	L2TP_ATTR_PEER_CONN_ID,		/* u32 */
-	L2TP_ATTR_SESSION_ID,		/* u32 */
-	L2TP_ATTR_PEER_SESSION_ID,	/* u32 */
-	L2TP_ATTR_UDP_CSUM,		/* u8 */
-	L2TP_ATTR_VLAN_ID,		/* u16 */
-	L2TP_ATTR_COOKIE,		/* 0, 4 or 8 bytes */
-	L2TP_ATTR_PEER_COOKIE,		/* 0, 4 or 8 bytes */
-	L2TP_ATTR_DEBUG,		/* u32 */
-	L2TP_ATTR_RECV_SEQ,		/* u8 */
-	L2TP_ATTR_SEND_SEQ,		/* u8 */
-	L2TP_ATTR_LNS_MODE,		/* u8 */
-	L2TP_ATTR_USING_IPSEC,		/* u8 */
-	L2TP_ATTR_RECV_TIMEOUT,		/* msec */
-	L2TP_ATTR_FD,			/* int */
-	L2TP_ATTR_IP_SADDR,		/* u32 */
-	L2TP_ATTR_IP_DADDR,		/* u32 */
-	L2TP_ATTR_UDP_SPORT,		/* u16 */
-	L2TP_ATTR_UDP_DPORT,		/* u16 */
-	L2TP_ATTR_MTU,			/* u16 */
-	L2TP_ATTR_MRU,			/* u16 */
-	L2TP_ATTR_STATS,		/* nested */
-	L2TP_ATTR_IP6_SADDR,		/* struct in6_addr */
-	L2TP_ATTR_IP6_DADDR,		/* struct in6_addr */
-	__L2TP_ATTR_MAX,
-};
-
-#define L2TP_ATTR_MAX			(__L2TP_ATTR_MAX - 1)
-
-/* Nested in L2TP_ATTR_STATS */
-enum {
-	L2TP_ATTR_STATS_NONE,		/* no data */
-	L2TP_ATTR_TX_PACKETS,		/* u64 */
-	L2TP_ATTR_TX_BYTES,		/* u64 */
-	L2TP_ATTR_TX_ERRORS,		/* u64 */
-	L2TP_ATTR_RX_PACKETS,		/* u64 */
-	L2TP_ATTR_RX_BYTES,		/* u64 */
-	L2TP_ATTR_RX_SEQ_DISCARDS,	/* u64 */
-	L2TP_ATTR_RX_OOS_PACKETS,	/* u64 */
-	L2TP_ATTR_RX_ERRORS,		/* u64 */
-	__L2TP_ATTR_STATS_MAX,
-};
-
-#define L2TP_ATTR_STATS_MAX		(__L2TP_ATTR_STATS_MAX - 1)
-
-enum l2tp_pwtype {
-	L2TP_PWTYPE_NONE = 0x0000,
-	L2TP_PWTYPE_ETH_VLAN = 0x0004,
-	L2TP_PWTYPE_ETH = 0x0005,
-	L2TP_PWTYPE_PPP = 0x0007,
-	L2TP_PWTYPE_PPP_AC = 0x0008,
-	L2TP_PWTYPE_IP = 0x000b,
-	__L2TP_PWTYPE_MAX
-};
-
-enum l2tp_l2spec_type {
-	L2TP_L2SPECTYPE_NONE,
-	L2TP_L2SPECTYPE_DEFAULT,
-};
-
-enum l2tp_encap_type {
-	L2TP_ENCAPTYPE_UDP,
-	L2TP_ENCAPTYPE_IP,
-};
-
-enum l2tp_seqmode {
-	L2TP_SEQ_NONE = 0,
-	L2TP_SEQ_IP = 1,
-	L2TP_SEQ_ALL = 2,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define L2TP_GENL_NAME		"l2tp"
-#define L2TP_GENL_VERSION	0x1
+#include <uapi/linux/l2tp.h>
 
 #endif
diff --git a/include/linux/llc.h b/include/linux/llc.h
index a2418ae13ee97234f96ba809053a1b33df320f59..b965314d017f546d09a5064fdf313b9893b52327 100644
--- a/include/linux/llc.h
+++ b/include/linux/llc.h
@@ -1,5 +1,3 @@
-#ifndef __LINUX_LLC_H
-#define __LINUX_LLC_H
 /*
  * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
  *
@@ -12,80 +10,14 @@
  *
  * See the GNU General Public License for more details.
  */
+#ifndef __LINUX_LLC_H
+#define __LINUX_LLC_H
 
-#include <linux/socket.h>
-
-#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
-struct sockaddr_llc {
-	__kernel_sa_family_t sllc_family; /* AF_LLC */
-	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
-	unsigned char   sllc_test;
-	unsigned char   sllc_xid;
-	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
-	unsigned char   sllc_sap;
-	unsigned char   sllc_mac[IFHWADDRLEN];
-	unsigned char   __pad[__LLC_SOCK_SIZE__ -
-			      sizeof(__kernel_sa_family_t) * 2 -
-			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
-};
-
-/* sockopt definitions. */
-enum llc_sockopts {
-	LLC_OPT_UNKNOWN = 0,
-	LLC_OPT_RETRY,		/* max retrans attempts. */
-	LLC_OPT_SIZE,		/* max PDU size (octets). */
-	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
-	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
-	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
-	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
-	LLC_OPT_TX_WIN,		/* tx window size. */
-	LLC_OPT_RX_WIN,		/* rx window size. */
-	LLC_OPT_PKTINFO,	/* ancillary packet information. */
-	LLC_OPT_MAX
-};
-
-#define LLC_OPT_MAX_RETRY	 100
-#define LLC_OPT_MAX_SIZE	4196
-#define LLC_OPT_MAX_WIN		 127
-#define LLC_OPT_MAX_ACK_TMR_EXP	  60
-#define LLC_OPT_MAX_P_TMR_EXP	  60
-#define LLC_OPT_MAX_REJ_TMR_EXP	  60
-#define LLC_OPT_MAX_BUSY_TMR_EXP  60
-
-/* LLC SAP types. */
-#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
-#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
-#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
-#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
-#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
-#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
-#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
-#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
-#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
-#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
-#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
-#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
-#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
-#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
-#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
-#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
-#define LLC_SAP_DISC	0xFC		/* Discovery			*/
-#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
-#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
-#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
-#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
-
-struct llc_pktinfo {
-	int lpi_ifindex;
-	unsigned char lpi_sap;
-	unsigned char lpi_mac[IFHWADDRLEN];
-};
+#include <uapi/linux/llc.h>
 
-#ifdef __KERNEL__
 #define LLC_SAP_DYN_START	0xC0
 #define LLC_SAP_DYN_STOP	0xDE
 #define LLC_SAP_DYN_TRIES	4
 
 #define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0]))
-#endif /* __KERNEL__ */
 #endif /* __LINUX_LLC_H */
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 9635116dd830e3634a6c6e2d06219eb36661578c..6492181bcb1dbc3617a3a3377ad5d0961fd4e536 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_LOOP_H
-#define _LINUX_LOOP_H
-
 /*
  * include/linux/loop.h
  *
@@ -9,15 +6,14 @@
  * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
  * permitted under the GNU General Public License.
  */
+#ifndef _LINUX_LOOP_H
+#define _LINUX_LOOP_H
 
-#define LO_NAME_SIZE	64
-#define LO_KEY_SIZE	32
-
-#ifdef __KERNEL__
 #include <linux/bio.h>
 #include <linux/blkdev.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
+#include <uapi/linux/loop.h>
 
 /* Possible states of device */
 enum {
@@ -66,69 +62,6 @@ struct loop_device {
 	struct gendisk		*lo_disk;
 };
 
-#endif /* __KERNEL__ */
-
-/*
- * Loop flags
- */
-enum {
-	LO_FLAGS_READ_ONLY	= 1,
-	LO_FLAGS_AUTOCLEAR	= 4,
-	LO_FLAGS_PARTSCAN	= 8,
-};
-
-#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
-#include <linux/types.h>	/* for __u64 */
-
-/* Backwards compatibility version */
-struct loop_info {
-	int		   lo_number;		/* ioctl r/o */
-	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
-	unsigned long	   lo_inode; 		/* ioctl r/o */
-	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
-	int		   lo_offset;
-	int		   lo_encrypt_type;
-	int		   lo_encrypt_key_size; 	/* ioctl w/o */
-	int		   lo_flags;			/* ioctl r/o */
-	char		   lo_name[LO_NAME_SIZE];
-	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	unsigned long	   lo_init[2];
-	char		   reserved[4];
-};
-
-struct loop_info64 {
-	__u64		   lo_device;			/* ioctl r/o */
-	__u64		   lo_inode;			/* ioctl r/o */
-	__u64		   lo_rdevice;			/* ioctl r/o */
-	__u64		   lo_offset;
-	__u64		   lo_sizelimit;/* bytes, 0 == max available */
-	__u32		   lo_number;			/* ioctl r/o */
-	__u32		   lo_encrypt_type;
-	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
-	__u32		   lo_flags;			/* ioctl r/o */
-	__u8		   lo_file_name[LO_NAME_SIZE];
-	__u8		   lo_crypt_name[LO_NAME_SIZE];
-	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	__u64		   lo_init[2];
-};
-
-/*
- * Loop filter types
- */
-
-#define LO_CRYPT_NONE		0
-#define LO_CRYPT_XOR		1
-#define LO_CRYPT_DES		2
-#define LO_CRYPT_FISH2		3    /* Twofish encryption */
-#define LO_CRYPT_BLOW		4
-#define LO_CRYPT_CAST128	5
-#define LO_CRYPT_IDEA		6
-#define LO_CRYPT_DUMMY		9
-#define LO_CRYPT_SKIPJACK	10
-#define LO_CRYPT_CRYPTOAPI	18
-#define MAX_LO_CRYPT		20
-
-#ifdef __KERNEL__
 /* Support for loadable transfer modules */
 struct loop_func_table {
 	int number;	/* filter type */ 
@@ -147,21 +80,3 @@ int loop_register_transfer(struct loop_func_table *funcs);
 int loop_unregister_transfer(int number); 
 
 #endif
-/*
- * IOCTL commands --- we will commandeer 0x4C ('L')
- */
-
-#define LOOP_SET_FD		0x4C00
-#define LOOP_CLR_FD		0x4C01
-#define LOOP_SET_STATUS		0x4C02
-#define LOOP_GET_STATUS		0x4C03
-#define LOOP_SET_STATUS64	0x4C04
-#define LOOP_GET_STATUS64	0x4C05
-#define LOOP_CHANGE_FD		0x4C06
-#define LOOP_SET_CAPACITY	0x4C07
-
-/* /dev/loop-control interface */
-#define LOOP_CTL_ADD		0x4C80
-#define LOOP_CTL_REMOVE		0x4C81
-#define LOOP_CTL_GET_FREE	0x4C82
-#endif
diff --git a/include/linux/lp.h b/include/linux/lp.h
index 0df024bfd6f0c672a755b2f701711040691f95ae..0dd276af9e4ead29f039f67becde01b991c8769d 100644
--- a/include/linux/lp.h
+++ b/include/linux/lp.h
@@ -1,105 +1,16 @@
-#ifndef _LINUX_LP_H
-#define _LINUX_LP_H
-
 /*
  * usr/include/linux/lp.h c.1991-1992 James Wiegand
  * many modifications copyright (C) 1992 Michael K. Johnson
  * Interrupt support added 1993 Nigel Gamble
  * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
  */
+#ifndef _LINUX_LP_H
+#define _LINUX_LP_H
 
-/*
- * Per POSIX guidelines, this module reserves the LP and lp prefixes
- * These are the lp_table[minor].flags flags...
- */
-#define LP_EXIST 0x0001
-#define LP_SELEC 0x0002
-#define LP_BUSY	 0x0004
-#define LP_BUSY_BIT_POS 2
-#define LP_OFFL	 0x0008
-#define LP_NOPA  0x0010
-#define LP_ERR   0x0020
-#define LP_ABORT 0x0040
-#define LP_CAREFUL 0x0080 /* obsoleted -arca */
-#define LP_ABORTOPEN 0x0100
-
-#define LP_TRUST_IRQ_  0x0200 /* obsolete */
-#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
-#define LP_DATA_AVAIL  0x0800 /* Data is available. */
-
-/* 
- * bit defines for 8255 status port
- * base + 1
- * accessed with LP_S(minor), which gets the byte...
- */
-#define LP_PBUSY	0x80  /* inverted input, active high */
-#define LP_PACK		0x40  /* unchanged input, active low */
-#define LP_POUTPA	0x20  /* unchanged input, active high */
-#define LP_PSELECD	0x10  /* unchanged input, active high */
-#define LP_PERRORP	0x08  /* unchanged input, active low */
-
-/* timeout for each character.  This is relative to bus cycles -- it
- * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
- * have extremely slow printing, or if the machine seems to slow down
- * a lot when you print.  If you have slow printing, increase this
- * number and recompile, and if your system gets bogged down, decrease
- * this number.  This can be changed with the tunelp(8) command as well.
- */
-
-#define LP_INIT_CHAR 1000
-
-/* The parallel port specs apparently say that there needs to be
- * a .5usec wait before and after the strobe.
- */
-
-#define LP_INIT_WAIT 1
-
-/* This is the amount of time that the driver waits for the printer to
- * catch up when the printer's buffer appears to be filled.  If you
- * want to tune this and have a fast printer (i.e. HPIIIP), decrease
- * this number, and if you have a slow printer, increase this number.
- * This is in hundredths of a second, the default 2 being .05 second.
- * Or use the tunelp(8) command, which is especially nice if you want
- * change back and forth between character and graphics printing, which
- * are wildly different...
- */
-
-#define LP_INIT_TIME 2
-
-/* IOCTL numbers */
-#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
-#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
-#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
-			    FALSE to retry.  Default is retry.  */
-#define LPSETIRQ 0x0605  /* call with new IRQ number,
-			    or 0 for polling (no IRQ) */
-#define LPGETIRQ 0x0606  /* get the current IRQ number */
-#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
-/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
-#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
-			    line, and error indicators good on all writes,
-			    FALSE to ignore them.  Default is ignore. */
-#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
-			    FALSE to ignore error.  Default is ignore.  */
-#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
-#define LPRESET     0x060c  /* reset printer */
-#ifdef LP_STATS
-#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
-#endif
-#define LPGETFLAGS  0x060e  /* get status flags */
-#define LPSETTIMEOUT 0x060f /* set parport timeout */
-
-/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
-   This is also used for re-checking error conditions if LP_ABORT is
-   not set.  This is the default behavior. */
-
-#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
-#define LP_TIMEOUT_POLLED	(10 * HZ)
-
-#ifdef __KERNEL__
 
 #include <linux/wait.h>
 #include <linux/mutex.h>
+#include <uapi/linux/lp.h>
 
 /* Magic numbers for defining port-device mappings */
 #define LP_PARPORT_UNSPEC -4
@@ -187,5 +98,3 @@ struct lp_struct {
 #define LP_DELAY 	50
 
 #endif
-
-#endif
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 6c406845f7e29d166667ebc1587fe41eb5cb2448..3d15c838116c67bcdab17b141a6a9f7618fe1b71 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -6,295 +6,11 @@
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation, incorporated herein by reference.
  */
-
 #ifndef __LINUX_MDIO_H__
 #define __LINUX_MDIO_H__
 
-#include <linux/types.h>
-#include <linux/mii.h>
-
-/* MDIO Manageable Devices (MMDs). */
-#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
-					 * Physical Medium Dependent */
-#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
-#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
-#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
-#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
-#define MDIO_MMD_TC		6	/* Transmission Convergence */
-#define MDIO_MMD_AN		7	/* Auto-Negotiation */
-#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
-#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
-#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
-
-/* Generic MDIO registers. */
-#define MDIO_CTRL1		MII_BMCR
-#define MDIO_STAT1		MII_BMSR
-#define MDIO_DEVID1		MII_PHYSID1
-#define MDIO_DEVID2		MII_PHYSID2
-#define MDIO_SPEED		4	/* Speed ability */
-#define MDIO_DEVS1		5	/* Devices in package */
-#define MDIO_DEVS2		6
-#define MDIO_CTRL2		7	/* 10G control 2 */
-#define MDIO_STAT2		8	/* 10G status 2 */
-#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
-#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
-#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
-#define MDIO_PKGID1		14	/* Package identifier */
-#define MDIO_PKGID2		15
-#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
-#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
-#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
-#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
-#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
-#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
-#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
-
-/* Media-dependent registers. */
-#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
-#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
-					 * Lanes B-D are numbered 134-136. */
-#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
-#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
-#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
-#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
-
-/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
-#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
-#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
-#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
-#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
-#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
-#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
-
-/* Control register 1. */
-/* Enable extended speed selection */
-#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
-/* All speed selection bits */
-#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
-#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
-#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
-#define MDIO_CTRL1_RESET		BMCR_RESET
-#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
-#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
-#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
-#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
-#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
-#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
-#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
-#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
-#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */
-
-/* 10 Gb/s */
-#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
-/* 10PASS-TS/2BASE-TL */
-#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
-
-/* Status register 1. */
-#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
-#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
-#define MDIO_STAT1_FAULT		0x0080	/* Fault */
-#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
-#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
-#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
-#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
-#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
-#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
-
-/* Speed register. */
-#define MDIO_SPEED_10G			0x0001	/* 10G capable */
-#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
-#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
-#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
-#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
-#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
-#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
-
-/* Device present registers. */
-#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
-#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
-#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
-#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
-#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
-#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
-#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
-#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
-#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
-
-/* Control register 2. */
-#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
-#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
-#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
-#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
-#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
-#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
-#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
-#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
-#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
-#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
-#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
-#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
-#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
-#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
-#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
-#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
-#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
-#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
-#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
-#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
-#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
-#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
-
-/* Status register 2. */
-#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
-#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
-#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
-#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
-#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
-#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
-#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
-#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
-#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
-#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
-#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
-#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
-#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
-#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
-#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
-#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
-#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
-#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
-#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
-#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
-#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
-
-/* Transmit disable register. */
-#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
-#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
-#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
-#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
-#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
-
-/* Receive signal detect register. */
-#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
-#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
-#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
-#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
-#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
-
-/* Extended abilities register. */
-#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
-#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
-#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
-#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
-#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
-#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
-#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
-#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
-#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
-
-/* PHY XGXS lane state register. */
-#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
-#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
-#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
-#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
-#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
-
-/* PMA 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
-
-/* PMA 10GBASE-T TX power register. */
-#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
-
-/* PMA 10GBASE-T SNR registers. */
-/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
-#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
-#define MDIO_PMA_10GBT_SNR_MAX		127
-
-/* PMA 10GBASE-R FEC ability register. */
-#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
-#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
-
-/* PCS 10GBASE-R/-T status register 1. */
-#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
-
-/* PCS 10GBASE-R/-T status register 2. */
-#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
-#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
-
-/* AN 10GBASE-T control register. */
-#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
-
-/* AN 10GBASE-T status register. */
-#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
-#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
-#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
-#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
-#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
-#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
-#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
-
-/* EEE Supported/Advertisement/LP Advertisement registers.
- *
- * EEE capability Register (3.20), Advertisement (7.60) and
- * Link partner ability (7.61) registers have and can use the same identical
- * bit masks.
- */
-#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
-/* Note: the two defines above can be potentially used by the user-land
- * and cannot remove them now.
- * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
- * using the previous ones (that can be considered obsolete).
- */
-#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
-#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
-#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
-#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
-#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
-#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
-
-/* LASI RX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
-#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
-#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
-#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
-#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
-
-/* LASI TX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
-#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
-#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
-#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
-#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
-#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
-
-/* LASI control/status registers. */
-#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
-#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
-#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
-
-/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
-
-#define MDIO_PHY_ID_C45			0x8000
-#define MDIO_PHY_ID_PRTAD		0x03e0
-#define MDIO_PHY_ID_DEVAD		0x001f
-#define MDIO_PHY_ID_C45_MASK						\
-	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
-
-static inline __u16 mdio_phy_id_c45(int prtad, int devad)
-{
-	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
-}
+#include <uapi/linux/mdio.h>
 
-#ifdef __KERNEL__
 
 static inline bool mdio_phy_id_is_c45(int phy_id)
 {
@@ -460,5 +176,4 @@ static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv)
 	return reg;
 }
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index cec56932560823ac6a34ce5c5c21bea24316a9ea..e5ccb9ddd90eeb634665e88afd13d56184fff241 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -1,66 +1,10 @@
-#ifndef _LINUX_MEMPOLICY_H
-#define _LINUX_MEMPOLICY_H 1
-
-#include <linux/errno.h>
-
 /*
  * NUMA memory policies for Linux.
  * Copyright 2003,2004 Andi Kleen SuSE Labs
  */
+#ifndef _LINUX_MEMPOLICY_H
+#define _LINUX_MEMPOLICY_H 1
 
-/*
- * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
- * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
- * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
- */
-
-/* Policies */
-enum {
-	MPOL_DEFAULT,
-	MPOL_PREFERRED,
-	MPOL_BIND,
-	MPOL_INTERLEAVE,
-	MPOL_MAX,	/* always last member of enum */
-};
-
-enum mpol_rebind_step {
-	MPOL_REBIND_ONCE,	/* do rebind work at once(not by two step) */
-	MPOL_REBIND_STEP1,	/* first step(set all the newly nodes) */
-	MPOL_REBIND_STEP2,	/* second step(clean all the disallowed nodes)*/
-	MPOL_REBIND_NSTEP,
-};
-
-/* Flags for set_mempolicy */
-#define MPOL_F_STATIC_NODES	(1 << 15)
-#define MPOL_F_RELATIVE_NODES	(1 << 14)
-
-/*
- * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
- * either set_mempolicy() or mbind().
- */
-#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
-
-/* Flags for get_mempolicy */
-#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
-#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
-#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
-
-/* Flags for mbind */
-#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
-#define MPOL_MF_MOVE	(1<<1)	/* Move pages owned by this process to conform to mapping */
-#define MPOL_MF_MOVE_ALL (1<<2)	/* Move every page to conform to mapping */
-#define MPOL_MF_INTERNAL (1<<3)	/* Internal flags start here */
-
-/*
- * Internal flags that share the struct mempolicy flags word with
- * "mode flags".  These flags are allocated from bit 0 up, as they
- * are never OR'ed into the mode in mempolicy API arguments.
- */
-#define MPOL_F_SHARED  (1 << 0)	/* identify shared policies */
-#define MPOL_F_LOCAL   (1 << 1)	/* preferred local allocation */
-#define MPOL_F_REBINDING (1 << 2)	/* identify policies in rebinding */
-
-#ifdef __KERNEL__
 
 #include <linux/mmzone.h>
 #include <linux/slab.h>
@@ -68,6 +12,7 @@ enum mpol_rebind_step {
 #include <linux/spinlock.h>
 #include <linux/nodemask.h>
 #include <linux/pagemap.h>
+#include <uapi/linux/mempolicy.h>
 
 struct mm_struct;
 
@@ -379,6 +324,4 @@ static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
 }
 
 #endif /* CONFIG_NUMA */
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8ef3a7a115924593b2968c180d01a5763e931f72..47492c9631b3826fb8a52a53f6dbbdcbb7bbe2e3 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -4,163 +4,12 @@
  *
  * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
  */
-
 #ifndef __LINUX_MII_H__
 #define __LINUX_MII_H__
 
-#include <linux/types.h>
-#include <linux/ethtool.h>
-
-/* Generic MII registers. */
-#define MII_BMCR		0x00	/* Basic mode control register */
-#define MII_BMSR		0x01	/* Basic mode status register  */
-#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
-#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
-#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
-#define MII_LPA			0x05	/* Link partner ability reg    */
-#define MII_EXPANSION		0x06	/* Expansion register          */
-#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
-#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
-#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
-#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
-#define MII_ESTATUS		0x0f	/* Extended Status             */
-#define MII_DCOUNTER		0x12	/* Disconnect counter          */
-#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
-#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
-#define MII_SREVISION		0x16	/* Silicon revision            */
-#define MII_RESV1		0x17	/* Reserved...                 */
-#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
-#define MII_PHYADDR		0x19	/* PHY address                 */
-#define MII_RESV2		0x1a	/* Reserved...                 */
-#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
-#define MII_NCONFIG		0x1c	/* Network interface config    */
-
-/* Basic mode control register. */
-#define BMCR_RESV		0x003f	/* Unused...                   */
-#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
-#define BMCR_CTST		0x0080	/* Collision test              */
-#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
-#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
-#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
-#define BMCR_PDOWN		0x0800	/* Enable low power state      */
-#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
-#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
-#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
-#define BMCR_RESET		0x8000	/* Reset to default state      */
-
-/* Basic mode status register. */
-#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
-#define BMSR_JCD		0x0002	/* Jabber detected             */
-#define BMSR_LSTATUS		0x0004	/* Link status                 */
-#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
-#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
-#define BMSR_RESV		0x00c0	/* Unused...                   */
-#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
-#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
-#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
-#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
-#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
-
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
-#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
-#define ADVERTISE_RESV		0x1000	/* Unused...                   */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
-
-#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				  ADVERTISE_CSMA)
-#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
-				  ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/* Link partner ability register. */
-#define LPA_SLCT		0x001f	/* Same as advertise selector  */
-#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
-#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
-#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
-#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
-#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
-#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
-#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
-#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
-#define LPA_RESV		0x1000	/* Unused...                   */
-#define LPA_RFAULT		0x2000	/* Link partner faulted        */
-#define LPA_LPACK		0x4000	/* Link partner acked us       */
-#define LPA_NPAGE		0x8000	/* Next page bit               */
-
-#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
-#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
-#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
-#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
-#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
-#define EXPANSION_RESV		0xffe0	/* Unused...                   */
-
-#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
-#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
-
-/* N-way test register. */
-#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
-#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
-#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
-
-/* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
-#define CTL1000_AS_MASTER	0x0800
-#define CTL1000_ENABLE_MASTER	0x1000
-
-/* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
-#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
-#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
-
-/* Flow control flags */
-#define FLOW_CTRL_TX		0x01
-#define FLOW_CTRL_RX		0x02
-
-/* MMD Access Control register fields */
-#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
-#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
-#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
-#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
-#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
-
-/* This structure is used in all SIOCxMIIxxx ioctl calls */
-struct mii_ioctl_data {
-	__u16		phy_id;
-	__u16		reg_num;
-	__u16		val_in;
-	__u16		val_out;
-};
-
-#ifdef __KERNEL__
 
 #include <linux/if.h>
+#include <uapi/linux/mii.h>
 
 struct ethtool_cmd;
 
@@ -487,5 +336,4 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
 	return cap;
 }
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_MII_H__ */
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 77cec2f45cb77d54c19b049f086d51c2db3a980b..d09dde1e57fb43e2f5be170d31e8fceb8c41a389 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -1,20 +1,11 @@
 #ifndef _LINUX_MMAN_H
 #define _LINUX_MMAN_H
 
-#include <asm/mman.h>
-
-#define MREMAP_MAYMOVE	1
-#define MREMAP_FIXED	2
-
-#define OVERCOMMIT_GUESS		0
-#define OVERCOMMIT_ALWAYS		1
-#define OVERCOMMIT_NEVER		2
-
-#ifdef __KERNEL__
 #include <linux/mm.h>
 #include <linux/percpu_counter.h>
 
 #include <linux/atomic.h>
+#include <uapi/linux/mman.h>
 
 extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
@@ -88,5 +79,4 @@ calc_vm_flag_bits(unsigned long flags)
 	       _calc_vm_trans(flags, MAP_DENYWRITE,  VM_DENYWRITE ) |
 	       _calc_vm_trans(flags, MAP_LOCKED,     VM_LOCKED    );
 }
-#endif /* __KERNEL__ */
 #endif /* _LINUX_MMAN_H */
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 46caaf44339d6e706bd822218f4d56616eb51671..ea00d9162ee57c858954e8ec8cd36d4ebf0f15e0 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -1,138 +1,10 @@
 #ifndef __LINUX_MROUTE_H
 #define __LINUX_MROUTE_H
 
-#include <linux/sockios.h>
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/in.h>
-#endif
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the mrouted code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT_BASE	200
-#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
-#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
-#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
-#define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXVIFS		32	
-typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short vifi_t;
-#define ALL_VIFS	((vifi_t)(-1))
-
-/*
- *	Same idea as select
- */
- 
-#define VIFM_SET(n,m)	((m)|=(1<<(n)))
-#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
-#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
-#define VIFM_CLRALL(m)	((m)=0)
-#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
-#define VIFM_SAME(m1,m2)	((m1)==(m2))
-
-/*
- *	Passed by mrouted for an MRT_ADD_VIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
- 
-struct vifctl {
-	vifi_t	vifc_vifi;		/* Index of VIF */
-	unsigned char vifc_flags;	/* VIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-	union {
-		struct in_addr vifc_lcl_addr;     /* Local interface address */
-		int            vifc_lcl_ifindex;  /* Local interface index   */
-	};
-	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
-};
-
-#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
-#define VIFF_SRCRT		0x2	/* NI */
-#define VIFF_REGISTER		0x4	/* register vif	*/
-#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
-					   vifc_lcl_addr to find an interface */
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
- 
-struct mfcctl {
-	struct in_addr mfcc_origin;		/* Origin of mcast	*/
-	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
-	vifi_t	mfcc_parent;			/* Where it arrived	*/
-	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
-	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
-	unsigned int mfcc_byte_cnt;
-	unsigned int mfcc_wrong_if;
-	int	     mfcc_expire;
-};
-
-/* 
- *	Group count retrieval for mrouted
- */
- 
-struct sioc_sg_req {
-	struct in_addr src;
-	struct in_addr grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_vif_req {
-	vifi_t	vifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	This is the format the mroute daemon expects to see IGMP control
- *	data. Magically happens to be like an IP packet as per the original
- */
- 
-struct igmpmsg {
-	__u32 unused1,unused2;
-	unsigned char im_msgtype;		/* What is this */
-	unsigned char im_mbz;			/* Must be zero */
-	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
-	unsigned char unused3;
-	struct in_addr im_src,im_dst;
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
 #include <linux/pim.h>
 #include <net/sock.h>
+#include <uapi/linux/mroute.h>
 
 #ifdef CONFIG_IP_MROUTE
 static inline int ip_mroute_opt(int opt)
@@ -228,24 +100,8 @@ struct mfc_cache {
 #define MFC_HASH(a,b)	((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1))
 #endif		
 
-#endif
-
-
-#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
-
-/*
- *	Pseudo messages used by mrouted
- */
-
-#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
-#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
-#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
-
-#ifdef __KERNEL__
 struct rtmsg;
 extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
 			  __be32 saddr, __be32 daddr,
 			  struct rtmsg *rtm, int nowait);
 #endif
-
-#endif
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 6d8c7251eb8d4147968c6a146473868caa0eebbc..a223561ba12e397e89d23dcd2ed3fd3e4311645a 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -1,123 +1,11 @@
 #ifndef __LINUX_MROUTE6_H
 #define __LINUX_MROUTE6_H
 
-#include <linux/types.h>
-#include <linux/sockios.h>
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the pim6sd code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT6_BASE	200
-#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
-#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
-#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
-#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXMIFS		32
-typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short mifi_t;
-#define ALL_MIFS	((mifi_t)(-1))
-
-#ifndef IF_SETSIZE
-#define IF_SETSIZE	256
-#endif
-
-typedef	__u32		if_mask;
-#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
-
-#if !defined(__KERNEL__)
-#if !defined(DIV_ROUND_UP)
-#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
-#endif
-#endif
-
-typedef struct if_set {
-	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
-} if_set;
-
-#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
-#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
-#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
-#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
-#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
-
-/*
- *	Passed by mrouted for an MRT_ADD_MIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
-
-struct mif6ctl {
-	mifi_t	mif6c_mifi;		/* Index of MIF */
-	unsigned char mif6c_flags;	/* MIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	__u16	 mif6c_pifi;		/* the index of the physical IF */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-};
-
-#define MIFF_REGISTER	0x1	/* register vif	*/
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
-
-struct mf6cctl {
-	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
-	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
-	mifi_t	mf6cc_parent;			/* Where it arrived	*/
-	struct if_set mf6cc_ifset;		/* Where it is going */
-};
-
-/*
- *	Group count retrieval for pim6sd
- */
-
-struct sioc_sg_req6 {
-	struct sockaddr_in6 src;
-	struct sockaddr_in6 grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_mif_req6 {
-	mifi_t	mifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
 
 #include <linux/pim.h>
 #include <linux/skbuff.h>	/* for struct sk_buff_head */
 #include <net/net_namespace.h>
+#include <uapi/linux/mroute6.h>
 
 #ifdef CONFIG_IPV6_MROUTE
 static inline int ip6_mroute_opt(int opt)
@@ -225,9 +113,6 @@ struct mfc6_cache {
 
 #define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
 
-#endif
-
-#ifdef __KERNEL__
 struct rtmsg;
 extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
 			   struct rtmsg *rtm, int nowait);
@@ -246,24 +131,3 @@ static inline int ip6mr_sk_done(struct sock *sk)
 }
 #endif
 #endif
-
-/*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
- * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
- * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
- */
-
-struct mrt6msg {
-#define MRT6MSG_NOCACHE		1
-#define MRT6MSG_WRONGMIF	2
-#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
-	__u8		im6_mbz;		/* must be zero		   */
-	__u8		im6_msgtype;		/* what type of message    */
-	__u16		im6_mif;		/* mif rec'd on		   */
-	__u32		im6_pad;		/* padding for 64 bit arch */
-	struct in6_addr	im6_src, im6_dst;
-};
-
-#endif
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 11cc2ac67e756af2b633a8badabcc49f4ffe8cb7..e1b163f912fbf0ad484c2435d08577f7929452b6 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -1,174 +1,11 @@
 #ifndef _LINUX_MSDOS_FS_H
 #define _LINUX_MSDOS_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/msdos_fs.h>
 
-/*
- * The MS-DOS filesystem constants/structures
- */
-
-#define SECTOR_SIZE	512		/* sector size (bytes) */
-#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
-#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
-#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
-#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
-#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
-#define MSDOS_LONGNAME	256		/* maximum name length */
-#define CF_LE_W(v)	le16_to_cpu(v)
-#define CF_LE_L(v)	le32_to_cpu(v)
-#define CT_LE_W(v)	cpu_to_le16(v)
-#define CT_LE_L(v)	cpu_to_le32(v)
-
-#define MSDOS_ROOT_INO	 1	/* The root inode number */
-#define MSDOS_FSINFO_INO 2	/* Used for managing the FSINFO block */
-
-#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
-
-/* directory limit */
-#define FAT_MAX_DIR_ENTRIES	(65536)
-#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
-
-#define ATTR_NONE	0	/* no attribute bits */
-#define ATTR_RO		1	/* read-only */
-#define ATTR_HIDDEN	2	/* hidden */
-#define ATTR_SYS	4	/* system */
-#define ATTR_VOLUME	8	/* volume label */
-#define ATTR_DIR	16	/* directory */
-#define ATTR_ARCH	32	/* archived */
-
-/* attribute bits that are copied "as is" */
-#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
-/* bits that are used by the Windows 95/Windows NT extended FAT */
-#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
-
-#define CASE_LOWER_BASE	8	/* base is lower case */
-#define CASE_LOWER_EXT	16	/* extension is lower case */
-
-#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
-#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
-
-#define FAT_LFN_LEN	255	/* maximum long name length */
-#define MSDOS_NAME	11	/* maximum name length */
-#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
-#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
-#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
-
-#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
-	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
-
-/* start of data cluster's entry (number of reserved clusters) */
-#define FAT_START_ENT	2
-
-/* maximum number of clusters */
-#define MAX_FAT12	0xFF4
-#define MAX_FAT16	0xFFF4
-#define MAX_FAT32	0x0FFFFFF6
-#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
-	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
-
-/* bad cluster mark */
-#define BAD_FAT12	0xFF7
-#define BAD_FAT16	0xFFF7
-#define BAD_FAT32	0x0FFFFFF7
-
-/* standard EOF */
-#define EOF_FAT12	0xFFF
-#define EOF_FAT16	0xFFFF
-#define EOF_FAT32	0x0FFFFFFF
-
-#define FAT_ENT_FREE	(0)
-#define FAT_ENT_BAD	(BAD_FAT32)
-#define FAT_ENT_EOF	(EOF_FAT32)
-
-#define FAT_FSINFO_SIG1	0x41615252
-#define FAT_FSINFO_SIG2	0x61417272
-#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
-			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
-
-struct __fat_dirent {
-	long		d_ino;
-	__kernel_off_t	d_off;
-	unsigned short	d_reclen;
-	char		d_name[256]; /* We must not include limits.h! */
-};
-
-/*
- * ioctl commands
- */
-#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
-#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
-/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
-#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
-#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
-
-struct fat_boot_sector {
-	__u8	ignored[3];	/* Boot strap short or near jump */
-	__u8	system_id[8];	/* Name - can be used to special case
-				   partition manager volumes */
-	__u8	sector_size[2];	/* bytes per logical sector */
-	__u8	sec_per_clus;	/* sectors/cluster */
-	__le16	reserved;	/* reserved sectors */
-	__u8	fats;		/* number of FATs */
-	__u8	dir_entries[2];	/* root directory entries */
-	__u8	sectors[2];	/* number of sectors */
-	__u8	media;		/* media code */
-	__le16	fat_length;	/* sectors/FAT */
-	__le16	secs_track;	/* sectors per track */
-	__le16	heads;		/* number of heads */
-	__le32	hidden;		/* hidden sectors (unused) */
-	__le32	total_sect;	/* number of sectors (if sectors == 0) */
-
-	/* The following fields are only used by FAT32 */
-	__le32	fat32_length;	/* sectors/FAT */
-	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
-	__u8	version[2];	/* major, minor filesystem version */
-	__le32	root_cluster;	/* first cluster in root directory */
-	__le16	info_sector;	/* filesystem info sector */
-	__le16	backup_boot;	/* backup boot sector */
-	__le16	reserved2[6];	/* Unused */
-};
-
-struct fat_boot_fsinfo {
-	__le32   signature1;	/* 0x41615252L */
-	__le32   reserved1[120];	/* Nothing as far as I can tell */
-	__le32   signature2;	/* 0x61417272L */
-	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
-	__le32   next_cluster;	/* Most recently allocated cluster */
-	__le32   reserved2[4];
-};
-
-struct msdos_dir_entry {
-	__u8	name[MSDOS_NAME];/* name and extension */
-	__u8	attr;		/* attribute bits */
-	__u8    lcase;		/* Case for base and extension */
-	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
-	__le16	ctime;		/* Creation time */
-	__le16	cdate;		/* Creation date */
-	__le16	adate;		/* Last access date */
-	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
-	__le16	time,date,start;/* time, date and first cluster */
-	__le32	size;		/* file size (in bytes) */
-};
-
-/* Up to 13 characters of the name */
-struct msdos_dir_slot {
-	__u8    id;		/* sequence number for slot */
-	__u8    name0_4[10];	/* first 5 characters in name */
-	__u8    attr;		/* attribute byte */
-	__u8    reserved;	/* always 0 */
-	__u8    alias_checksum;	/* checksum for 8.3 alias */
-	__u8    name5_10[12];	/* 6 more characters in name */
-	__le16   start;		/* starting cluster number, 0 in long slots */
-	__u8    name11_12[4];	/* last 2 characters in name */
-};
-
-#ifdef __KERNEL__
 /* media of boot sector */
 static inline int fat_valid_media(u8 media)
 {
 	return 0xf8 <= media || media == 0xf0;
 }
-#endif /* !__KERNEL__ */
 #endif /* !_LINUX_MSDOS_FS_H */
diff --git a/include/linux/msg.h b/include/linux/msg.h
index 56abf1558fdddab58feab539eff542a5d6f21dcc..7a4b9e97d29a0782ef0dde63126f6a124eeb848b 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -1,78 +1,8 @@
 #ifndef _LINUX_MSG_H
 #define _LINUX_MSG_H
 
-#include <linux/ipc.h>
-
-/* ipcs ctl commands */
-#define MSG_STAT 11
-#define MSG_INFO 12
-
-/* msgrcv options */
-#define MSG_NOERROR     010000  /* no error if message is too big */
-#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct msqid_ds {
-	struct ipc_perm msg_perm;
-	struct msg *msg_first;		/* first message on queue,unused  */
-	struct msg *msg_last;		/* last message in queue,unused */
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
-	unsigned long  msg_lqbytes;	/* ditto */
-	unsigned short msg_cbytes;	/* current number of bytes on queue */
-	unsigned short msg_qnum;	/* number of messages in queue */
-	unsigned short msg_qbytes;	/* max number of bytes on queue */
-	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
-};
-
-/* Include the definition of msqid64_ds */
-#include <asm/msgbuf.h>
-
-/* message buffer for msgsnd and msgrcv calls */
-struct msgbuf {
-	long mtype;         /* type of message */
-	char mtext[1];      /* message text */
-};
-
-/* buffer for msgctl calls IPC_INFO, MSG_INFO */
-struct msginfo {
-	int msgpool;
-	int msgmap; 
-	int msgmax; 
-	int msgmnb; 
-	int msgmni; 
-	int msgssz; 
-	int msgtql; 
-	unsigned short  msgseg; 
-};
-
-/*
- * Scaling factor to compute msgmni:
- * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
- * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
- * up to 8MB       : msgmni = 16 (MSGMNI)
- * 4 GB            : msgmni = 8K
- * more than 16 GB : msgmni = 32K (IPCMNI)
- */
-#define MSG_MEM_SCALE 32
-
-#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
-#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
-#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
-
-/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
-#define MSGTQL  MSGMNB            /* number of system message headers */
-#define MSGMAP  MSGMNB            /* number of entries in message map */
-#define MSGSSZ  16                /* message segment size */
-#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
-#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/msg.h>
 
 /* one msg_msg structure for each message */
 struct msg_msg {
@@ -107,6 +37,4 @@ extern long do_msgsnd(int msqid, long mtype, void __user *mtext,
 extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext,
 			size_t msgsz, long msgtyp, int msgflg);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_MSG_H */
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index 54b8e0d8d9161e310ea11df8f81f81c44c1cfa1d..5d0b2a1dee69c9814fe218407aa3bf381d577e23 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -43,15 +43,12 @@
  *
  *
  */
-
 #ifndef __LINUX_N_R3964_H__
 #define __LINUX_N_R3964_H__
 
-/* line disciplines for r3964 protocol */
-
-#ifdef __KERNEL__
 
 #include <linux/param.h>
+#include <uapi/linux/n_r3964.h>
 
 /*
  * Common ascii handshake characters:
@@ -73,32 +70,6 @@
 #define R3964_TO_RX_PANIC ((4000)*HZ/1000)
 #define R3964_MAX_RETRIES 5
 
-#endif
-
-/*
- * Ioctl-commands
- */
-
-#define R3964_ENABLE_SIGNALS      0x5301
-#define R3964_SETPRIORITY         0x5302
-#define R3964_USE_BCC             0x5303
-#define R3964_READ_TELEGRAM       0x5304
-
-/* Options for R3964_SETPRIORITY */
-#define R3964_MASTER   0
-#define R3964_SLAVE    1
-
-/* Options for R3964_ENABLE_SIGNALS */
-#define R3964_SIG_ACK   0x0001
-#define R3964_SIG_DATA  0x0002
-#define R3964_SIG_ALL   0x000f
-#define R3964_SIG_NONE  0x0000
-#define R3964_USE_SIGIO 0x1000
-
-/*
- * r3964 operation states:
- */
-#ifdef __KERNEL__
 
 enum { R3964_IDLE, 
 	   R3964_TX_REQUEST, R3964_TRANSMITTING, 
@@ -127,29 +98,6 @@ struct r3964_client_info {
 };
 
 
-#endif
-
-/* types for msg_id: */
-enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
-
-#define R3964_MAX_MSG_COUNT 32
-
-/* error codes for client messages */
-#define R3964_OK 0        /* no error. */
-#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
-#define R3964_OVERFLOW -2 /* msg queue overflow */
-
-/* the client gets this struct when calling read(fd,...): */
-struct r3964_client_message {
-	  int     msg_id;
-	  int     arg;
-	  int     error_code;
-};
-
-#define R3964_MTU      256
-
-
-#ifdef __KERNEL__
 
 struct r3964_block_header;
 
@@ -226,6 +174,4 @@ struct r3964_info {
 	int nRetry;
 };
 
-#endif	
-
 #endif
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
index 5c86e2b33e2db55644ccdaa360c49e9ce394856a..4871170a04a0b24b33e2a5221577fb22565d363b 100644
--- a/include/linux/nbd.h
+++ b/include/linux/nbd.h
@@ -11,45 +11,13 @@
  * 2004/02/19 Paul Clements
  *            Removed PARANOIA, plus various cleanup and comments
  */
-
 #ifndef LINUX_NBD_H
 #define LINUX_NBD_H
 
-#include <linux/types.h>
-
-#define NBD_SET_SOCK	_IO( 0xab, 0 )
-#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
-#define NBD_SET_SIZE	_IO( 0xab, 2 )
-#define NBD_DO_IT	_IO( 0xab, 3 )
-#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
-#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
-#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
-#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
-#define NBD_DISCONNECT  _IO( 0xab, 8 )
-#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
-#define NBD_SET_FLAGS   _IO( 0xab, 10)
-
-enum {
-	NBD_CMD_READ = 0,
-	NBD_CMD_WRITE = 1,
-	NBD_CMD_DISC = 2,
-	/* there is a gap here to match userspace */
-	NBD_CMD_TRIM = 4
-};
-
-/* values for flags field */
-#define NBD_FLAG_HAS_FLAGS    (1 << 0) /* nbd-server supports flags */
-#define NBD_FLAG_READ_ONLY    (1 << 1) /* device is read-only */
-/* there is a gap here to match userspace */
-#define NBD_FLAG_SEND_TRIM    (1 << 5) /* send trim/discard */
-
-#define nbd_cmd(req) ((req)->cmd[0])
-
-/* userspace doesn't need the nbd_device structure */
-#ifdef __KERNEL__
 
 #include <linux/wait.h>
 #include <linux/mutex.h>
+#include <uapi/linux/nbd.h>
 
 struct request;
 
@@ -76,32 +44,3 @@ struct nbd_device {
 };
 
 #endif
-
-/* These are sent over the network in the request/reply magic fields */
-
-#define NBD_REQUEST_MAGIC 0x25609513
-#define NBD_REPLY_MAGIC 0x67446698
-/* Do *not* use magics: 0x12560953 0x96744668. */
-
-/*
- * This is the packet used for communication between client and
- * server. All data are in network byte order.
- */
-struct nbd_request {
-	__be32 magic;
-	__be32 type;	/* == READ || == WRITE 	*/
-	char handle[8];
-	__be64 from;
-	__be32 len;
-} __attribute__((packed));
-
-/*
- * This is the reply packet that nbd-server sends back to the client after
- * it has completed an I/O request (or an error occurs).
- */
-struct nbd_reply {
-	__be32 magic;
-	__be32 error;		/* 0 = ok, else error	*/
-	char handle[8];		/* handle you got from request	*/
-};
-#endif
diff --git a/include/linux/net.h b/include/linux/net.h
index 6ab31cabef7c01f947a384092caa4c08564233f7..aa1673160a4533be1b464d0588e9b6af21c022e8 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -18,49 +18,13 @@
 #ifndef _LINUX_NET_H
 #define _LINUX_NET_H
 
-#include <linux/socket.h>
-#include <asm/socket.h>
-
-#define NPROTO		AF_MAX
-
-#define SYS_SOCKET	1		/* sys_socket(2)		*/
-#define SYS_BIND	2		/* sys_bind(2)			*/
-#define SYS_CONNECT	3		/* sys_connect(2)		*/
-#define SYS_LISTEN	4		/* sys_listen(2)		*/
-#define SYS_ACCEPT	5		/* sys_accept(2)		*/
-#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
-#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
-#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
-#define SYS_SEND	9		/* sys_send(2)			*/
-#define SYS_RECV	10		/* sys_recv(2)			*/
-#define SYS_SENDTO	11		/* sys_sendto(2)		*/
-#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
-#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
-#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
-#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
-#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
-#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
-#define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
-#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
-#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
-
-typedef enum {
-	SS_FREE = 0,			/* not allocated		*/
-	SS_UNCONNECTED,			/* unconnected to any socket	*/
-	SS_CONNECTING,			/* in process of connecting	*/
-	SS_CONNECTED,			/* connected to socket		*/
-	SS_DISCONNECTING		/* in process of disconnecting	*/
-} socket_state;
-
-#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
-
-#ifdef __KERNEL__
 #include <linux/stringify.h>
 #include <linux/random.h>
 #include <linux/wait.h>
 #include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/kmemcheck.h>
 #include <linux/rcupdate.h>
+#include <uapi/linux/net.h>
 
 struct poll_table_struct;
 struct pipe_inode_info;
@@ -319,5 +283,4 @@ extern int kernel_sock_shutdown(struct socket *sock,
 #define MODULE_ALIAS_NET_PF_PROTO_NAME(pf, proto, name) \
 	MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \
 		     name)
-#endif /* __KERNEL__ */
 #endif	/* _LINUX_NET_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 561c8bc8976dce2b65245aba6aa051cdc590c69f..f8eda0276f03fadf3be56e8e70f928f792714406 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -25,12 +25,6 @@
 #ifndef _LINUX_NETDEVICE_H
 #define _LINUX_NETDEVICE_H
 
-#include <linux/if.h>
-#include <linux/if_ether.h>
-#include <linux/if_packet.h>
-#include <linux/if_link.h>
-
-#ifdef __KERNEL__
 #include <linux/pm_qos.h>
 #include <linux/timer.h>
 #include <linux/bug.h>
@@ -55,6 +49,7 @@
 
 #include <linux/netdev_features.h>
 #include <linux/neighbour.h>
+#include <uapi/linux/netdevice.h>
 
 struct netpoll_info;
 struct device;
@@ -133,14 +128,6 @@ static inline bool dev_xmit_complete(int rc)
 	return false;
 }
 
-#endif
-
-#define MAX_ADDR_LEN	32		/* Largest hardware address length */
-
-/* Initial net device group. All devices belong to group 0 by default. */
-#define INIT_NETDEV_GROUP	0
-
-#ifdef  __KERNEL__
 /*
  *	Compute the worst case header length according to the protocols
  *	used.
@@ -196,21 +183,6 @@ struct net_device_stats {
 	unsigned long	tx_compressed;
 };
 
-#endif  /*  __KERNEL__  */
-
-
-/* Media selection options. */
-enum {
-        IF_PORT_UNKNOWN = 0,
-        IF_PORT_10BASE2,
-        IF_PORT_10BASET,
-        IF_PORT_AUI,
-        IF_PORT_100BASET,
-        IF_PORT_100BASETX,
-        IF_PORT_100BASEFX
-};
-
-#ifdef __KERNEL__
 
 #include <linux/cache.h>
 #include <linux/skbuff.h>
@@ -2844,6 +2816,4 @@ do {								\
 })
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif	/* _LINUX_NETDEVICE_H */
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 1dcf2a38e51f69770395db885ab2aebc39558abe..ee142846f56a80882243b2dfc4468e9fdfbc5d3f 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -1,7 +1,6 @@
 #ifndef __LINUX_NETFILTER_H
 #define __LINUX_NETFILTER_H
 
-#ifdef __KERNEL__
 #include <linux/init.h>
 #include <linux/skbuff.h>
 #include <linux/net.h>
@@ -10,75 +9,7 @@
 #include <linux/in6.h>
 #include <linux/wait.h>
 #include <linux/list.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/sysctl.h>
-
-/* Responses from hook functions. */
-#define NF_DROP 0
-#define NF_ACCEPT 1
-#define NF_STOLEN 2
-#define NF_QUEUE 3
-#define NF_REPEAT 4
-#define NF_STOP 5
-#define NF_MAX_VERDICT NF_STOP
-
-/* we overload the higher bits for encoding auxiliary data such as the queue
- * number or errno values. Not nice, but better than additional function
- * arguments. */
-#define NF_VERDICT_MASK 0x000000ff
-
-/* extra verdict flags have mask 0x0000ff00 */
-#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
-
-/* queue number (NF_QUEUE) or errno (NF_DROP) */
-#define NF_VERDICT_QMASK 0xffff0000
-#define NF_VERDICT_QBITS 16
-
-#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
-
-#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-/* Generic cache responses from hook functions.
-   <= 0x2000 is used for protocol-flags. */
-#define NFC_UNKNOWN 0x4000
-#define NFC_ALTERED 0x8000
-
-/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
-#define NF_VERDICT_BITS 16
-#endif
-
-enum nf_inet_hooks {
-	NF_INET_PRE_ROUTING,
-	NF_INET_LOCAL_IN,
-	NF_INET_FORWARD,
-	NF_INET_LOCAL_OUT,
-	NF_INET_POST_ROUTING,
-	NF_INET_NUMHOOKS
-};
-
-enum {
-	NFPROTO_UNSPEC =  0,
-	NFPROTO_IPV4   =  2,
-	NFPROTO_ARP    =  3,
-	NFPROTO_BRIDGE =  7,
-	NFPROTO_IPV6   = 10,
-	NFPROTO_DECNET = 12,
-	NFPROTO_NUMPROTO,
-};
-
-union nf_inet_addr {
-	__u32		all[4];
-	__be32		ip;
-	__be32		ip6[4];
-	struct in_addr	in;
-	struct in6_addr	in6;
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/netfilter.h>
 #ifdef CONFIG_NETFILTER
 static inline int NF_DROP_GETERR(int verdict)
 {
@@ -411,5 +342,4 @@ extern struct nfq_ct_nat_hook __rcu *nfq_ct_nat_hook;
 static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
 #endif
 
-#endif /*__KERNEL__*/
 #endif /*__LINUX_NETFILTER_H*/
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
index 31d2844e6572be34ed104e1a92fafd48abc0bf76..dfb4d9e52bcb3a1775eebd627d1d758aaaed6c4b 100644
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@@ -1,30 +1,8 @@
 #ifndef __LINUX_BRIDGE_NETFILTER_H
 #define __LINUX_BRIDGE_NETFILTER_H
 
-/* bridge-specific defines for netfilter. 
- */
-
-#include <linux/netfilter.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/if_pppox.h>
-
-/* Bridge Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_BR_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_BR_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_BR_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_BR_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_BR_POST_ROUTING	4
-/* Not really a hook, but used for the ebtables broute table */
-#define NF_BR_BROUTING		5
-#define NF_BR_NUMHOOKS		6
-
-#ifdef __KERNEL__
+#include <uapi/linux/netfilter_bridge.h>
+
 
 enum nf_br_hook_priorities {
 	NF_BR_PRI_FIRST = INT_MIN,
@@ -118,5 +96,4 @@ static inline void br_drop_fake_rtable(struct sk_buff *skb)
 #define br_drop_fake_rtable(skb)	        do { } while (0)
 #endif /* CONFIG_BRIDGE_NETFILTER */
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
index b962dfc695ae0e5e5787627468bdff6911dd146d..dfaf116b3e8125a3f36511bfe35b64fc81d463e3 100644
--- a/include/linux/netfilter_ipv4.h
+++ b/include/linux/netfilter_ipv4.h
@@ -1,86 +1,12 @@
-#ifndef __LINUX_IP_NETFILTER_H
-#define __LINUX_IP_NETFILTER_H
-
 /* IPv4-specific defines for netfilter. 
  * (C)1998 Rusty Russell -- This code is GPL.
  */
+#ifndef __LINUX_IP_NETFILTER_H
+#define __LINUX_IP_NETFILTER_H
 
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP_SRC		0x0001
-/* Dest IP address. */
-#define NFC_IP_DST		0x0002
-/* Input device. */
-#define NFC_IP_IF_IN		0x0004
-/* Output device. */
-#define NFC_IP_IF_OUT		0x0008
-/* TOS. */
-#define NFC_IP_TOS		0x0010
-/* Protocol. */
-#define NFC_IP_PROTO		0x0020
-/* IP options. */
-#define NFC_IP_OPTIONS		0x0040
-/* Frag & flags. */
-#define NFC_IP_FRAG		0x0080
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP_TCPFLAGS		0x0100
-/* Source port. */
-#define NFC_IP_SRC_PT		0x0200
-/* Dest port. */
-#define NFC_IP_DST_PT		0x0400
-/* Something else about the proto */
-#define NFC_IP_PROTO_UNKNOWN	0x2000
-
-/* IP Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_IP_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_IP_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_IP_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_IP_POST_ROUTING	4
-#define NF_IP_NUMHOOKS		5
-#endif /* ! __KERNEL__ */
-
-enum nf_ip_hook_priorities {
-	NF_IP_PRI_FIRST = INT_MIN,
-	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
-	NF_IP_PRI_RAW = -300,
-	NF_IP_PRI_SELINUX_FIRST = -225,
-	NF_IP_PRI_CONNTRACK = -200,
-	NF_IP_PRI_MANGLE = -150,
-	NF_IP_PRI_NAT_DST = -100,
-	NF_IP_PRI_FILTER = 0,
-	NF_IP_PRI_SECURITY = 50,
-	NF_IP_PRI_NAT_SRC = 100,
-	NF_IP_PRI_SELINUX_LAST = 225,
-	NF_IP_PRI_CONNTRACK_HELPER = 300,
-	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
-	NF_IP_PRI_LAST = INT_MAX,
-};
-
-/* Arguments for setsockopt SOL_IP: */
-/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
-/* 2.2 firewalling (+ masq) went from 64 through 76 */
-/* 2.4 firewalling went 64 through 67. */
-#define SO_ORIGINAL_DST 80
+#include <uapi/linux/netfilter_ipv4.h>
 
-#ifdef __KERNEL__
 extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type);
 extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
 				   unsigned int dataoff, u_int8_t protocol);
-#endif /*__KERNEL__*/
-
 #endif /*__LINUX_IP_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index 7c8a513ce7a3ed03f0612e972537deb6569339e8..98ffb54988b6d79d16c7364212337e6312271393 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -1,81 +1,14 @@
-#ifndef __LINUX_IP6_NETFILTER_H
-#define __LINUX_IP6_NETFILTER_H
-
 /* IPv6-specific defines for netfilter. 
  * (C)1998 Rusty Russell -- This code is GPL.
  * (C)1999 David Jeffery
  *   this header was blatantly ripped from netfilter_ipv4.h 
  *   it's amazing what adding a bunch of 6s can do =8^)
  */
+#ifndef __LINUX_IP6_NETFILTER_H
+#define __LINUX_IP6_NETFILTER_H
 
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP6_SRC              0x0001
-/* Dest IP address. */
-#define NFC_IP6_DST              0x0002
-/* Input device. */
-#define NFC_IP6_IF_IN            0x0004
-/* Output device. */
-#define NFC_IP6_IF_OUT           0x0008
-/* TOS. */
-#define NFC_IP6_TOS              0x0010
-/* Protocol. */
-#define NFC_IP6_PROTO            0x0020
-/* IP options. */
-#define NFC_IP6_OPTIONS          0x0040
-/* Frag & flags. */
-#define NFC_IP6_FRAG             0x0080
-
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP6_TCPFLAGS         0x0100
-/* Source port. */
-#define NFC_IP6_SRC_PT           0x0200
-/* Dest port. */
-#define NFC_IP6_DST_PT           0x0400
-/* Something else about the proto */
-#define NFC_IP6_PROTO_UNKNOWN    0x2000
-
-/* IP6 Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP6_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_IP6_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_IP6_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_IP6_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_IP6_POST_ROUTING	4
-#define NF_IP6_NUMHOOKS		5
-#endif /* ! __KERNEL__ */
-
-
-enum nf_ip6_hook_priorities {
-	NF_IP6_PRI_FIRST = INT_MIN,
-	NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
-	NF_IP6_PRI_RAW = -300,
-	NF_IP6_PRI_SELINUX_FIRST = -225,
-	NF_IP6_PRI_CONNTRACK = -200,
-	NF_IP6_PRI_MANGLE = -150,
-	NF_IP6_PRI_NAT_DST = -100,
-	NF_IP6_PRI_FILTER = 0,
-	NF_IP6_PRI_SECURITY = 50,
-	NF_IP6_PRI_NAT_SRC = 100,
-	NF_IP6_PRI_SELINUX_LAST = 225,
-	NF_IP6_PRI_CONNTRACK_HELPER = 300,
-	NF_IP6_PRI_LAST = INT_MAX,
-};
+#include <uapi/linux/netfilter_ipv6.h>
 
-#ifdef  __KERNEL__
 
 #ifdef CONFIG_NETFILTER
 extern int ip6_route_me_harder(struct sk_buff *skb);
@@ -89,6 +22,4 @@ static inline int ipv6_netfilter_init(void) { return 0; }
 static inline void ipv6_netfilter_fini(void) { return; }
 #endif /* CONFIG_NETFILTER */
 
-#endif /* __KERNEL__ */
-
 #endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 6d3af05c107cf50e1dfe962a610b16bd43d7b6ab..e0f746b7b95c5292b03ca073b02ee2aa905de21a 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -1,160 +1,12 @@
 #ifndef __LINUX_NETLINK_H
 #define __LINUX_NETLINK_H
 
-#include <linux/socket.h> /* for __kernel_sa_family_t */
-#include <linux/types.h>
-
-#define NETLINK_ROUTE		0	/* Routing/device hook				*/
-#define NETLINK_UNUSED		1	/* Unused number				*/
-#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
-#define NETLINK_FIREWALL	3	/* Unused number, formerly ip_queue		*/
-#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
-#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
-#define NETLINK_XFRM		6	/* ipsec */
-#define NETLINK_SELINUX		7	/* SELinux event notifications */
-#define NETLINK_ISCSI		8	/* Open-iSCSI */
-#define NETLINK_AUDIT		9	/* auditing */
-#define NETLINK_FIB_LOOKUP	10	
-#define NETLINK_CONNECTOR	11
-#define NETLINK_NETFILTER	12	/* netfilter subsystem */
-#define NETLINK_IP6_FW		13
-#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
-#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
-#define NETLINK_GENERIC		16
-/* leave room for NETLINK_DM (DM Events) */
-#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
-#define NETLINK_ECRYPTFS	19
-#define NETLINK_RDMA		20
-#define NETLINK_CRYPTO		21	/* Crypto layer */
-
-#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
-
-#define MAX_LINKS 32		
-
-struct sockaddr_nl {
-	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
-	unsigned short	nl_pad;		/* zero		*/
-	__u32		nl_pid;		/* port ID	*/
-       	__u32		nl_groups;	/* multicast groups mask */
-};
-
-struct nlmsghdr {
-	__u32		nlmsg_len;	/* Length of message including header */
-	__u16		nlmsg_type;	/* Message content */
-	__u16		nlmsg_flags;	/* Additional flags */
-	__u32		nlmsg_seq;	/* Sequence number */
-	__u32		nlmsg_pid;	/* Sending process port ID */
-};
-
-/* Flags values */
-
-#define NLM_F_REQUEST		1	/* It is request message. 	*/
-#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
-#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
-#define NLM_F_ECHO		8	/* Echo this request 		*/
-#define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
-
-/* Modifiers to GET request */
-#define NLM_F_ROOT	0x100	/* specify tree	root	*/
-#define NLM_F_MATCH	0x200	/* return all matching	*/
-#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
-#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
-
-/* Modifiers to NEW request */
-#define NLM_F_REPLACE	0x100	/* Override existing		*/
-#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
-#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
-#define NLM_F_APPEND	0x800	/* Add to end of list		*/
-
-/*
-   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
-   4.4BSD CHANGE	NLM_F_REPLACE
-
-   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
-   Append		NLM_F_CREATE
-   Check		NLM_F_EXCL
- */
-
-#define NLMSG_ALIGNTO	4U
-#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
-#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
-#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
-#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
-#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
-#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
-				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
-#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
-			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
-			   (nlh)->nlmsg_len <= (len))
-#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
-
-#define NLMSG_NOOP		0x1	/* Nothing.		*/
-#define NLMSG_ERROR		0x2	/* Error		*/
-#define NLMSG_DONE		0x3	/* End of a dump	*/
-#define NLMSG_OVERRUN		0x4	/* Data lost		*/
-
-#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
-
-struct nlmsgerr {
-	int		error;
-	struct nlmsghdr msg;
-};
-
-#define NETLINK_ADD_MEMBERSHIP	1
-#define NETLINK_DROP_MEMBERSHIP	2
-#define NETLINK_PKTINFO		3
-#define NETLINK_BROADCAST_ERROR	4
-#define NETLINK_NO_ENOBUFS	5
-
-struct nl_pktinfo {
-	__u32	group;
-};
-
-#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
-
-enum {
-	NETLINK_UNCONNECTED = 0,
-	NETLINK_CONNECTED,
-};
-
-/*
- *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- * |        Header       | Pad |     Payload       | Pad |
- * |   (struct nlattr)   | ing |                   | ing |
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- *  <-------------- nlattr->nla_len -------------->
- */
-
-struct nlattr {
-	__u16           nla_len;
-	__u16           nla_type;
-};
-
-/*
- * nla_type (16 bits)
- * +---+---+-------------------------------+
- * | N | O | Attribute Type                |
- * +---+---+-------------------------------+
- * N := Carries nested attributes
- * O := Payload stored in network byte order
- *
- * Note: The N and O flag are mutually exclusive.
- */
-#define NLA_F_NESTED		(1 << 15)
-#define NLA_F_NET_BYTEORDER	(1 << 14)
-#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
-
-#define NLA_ALIGNTO		4
-#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
-#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
-
-#ifdef __KERNEL__
 
 #include <linux/capability.h>
 #include <linux/skbuff.h>
 #include <linux/export.h>
 #include <net/scm.h>
+#include <uapi/linux/netlink.h>
 
 struct net;
 
@@ -283,6 +135,4 @@ static inline int netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
 	return __netlink_dump_start(ssk, skb, nlh, control);
 }
 
-#endif /* __KERNEL__ */
-
 #endif	/* __LINUX_NETLINK_H */
diff --git a/include/linux/nfs.h b/include/linux/nfs.h
index 6d1fb63f59221690f72d62f1d8a5cae71070fcc5..3e794c12e90ae27bb1bf61a73bdb5e625c869c74 100644
--- a/include/linux/nfs.h
+++ b/include/linux/nfs.h
@@ -7,130 +7,9 @@
 #ifndef _LINUX_NFS_H
 #define _LINUX_NFS_H
 
-#define NFS_PROGRAM	100003
-#define NFS_PORT	2049
-#define NFS_MAXDATA	8192
-#define NFS_MAXPATHLEN	1024
-#define NFS_MAXNAMLEN	255
-#define NFS_MAXGROUPS	16
-#define NFS_FHSIZE	32
-#define NFS_COOKIESIZE	4
-#define NFS_FIFO_DEV	(-1)
-#define NFSMODE_FMT	0170000
-#define NFSMODE_DIR	0040000
-#define NFSMODE_CHR	0020000
-#define NFSMODE_BLK	0060000
-#define NFSMODE_REG	0100000
-#define NFSMODE_LNK	0120000
-#define NFSMODE_SOCK	0140000
-#define NFSMODE_FIFO	0010000
-
-#define NFS_MNT_PROGRAM		100005
-#define NFS_MNT_VERSION		1
-#define NFS_MNT3_VERSION	3
-
-#define NFS_PIPE_DIRNAME "nfs"
-
-/*
- * NFS stats. The good thing with these values is that NFSv3 errors are
- * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
- * no-one uses anyway), so we can happily mix code as long as we make sure
- * no NFSv3 errors are returned to NFSv2 clients.
- * Error codes that have a `--' in the v2 column are not part of the
- * standard, but seem to be widely used nevertheless.
- */
- enum nfs_stat {
-	NFS_OK = 0,			/* v2 v3 v4 */
-	NFSERR_PERM = 1,		/* v2 v3 v4 */
-	NFSERR_NOENT = 2,		/* v2 v3 v4 */
-	NFSERR_IO = 5,			/* v2 v3 v4 */
-	NFSERR_NXIO = 6,		/* v2 v3 v4 */
-	NFSERR_EAGAIN = 11,		/* v2 v3 */
-	NFSERR_ACCES = 13,		/* v2 v3 v4 */
-	NFSERR_EXIST = 17,		/* v2 v3 v4 */
-	NFSERR_XDEV = 18,		/*    v3 v4 */
-	NFSERR_NODEV = 19,		/* v2 v3 v4 */
-	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
-	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
-	NFSERR_INVAL = 22,		/* v2 v3 v4 */
-	NFSERR_FBIG = 27,		/* v2 v3 v4 */
-	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
-	NFSERR_ROFS = 30,		/* v2 v3 v4 */
-	NFSERR_MLINK = 31,		/*    v3 v4 */
-	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
-	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
-	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
-	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
-	NFSERR_STALE = 70,		/* v2 v3 v4 */
-	NFSERR_REMOTE = 71,		/* v2 v3 */
-	NFSERR_WFLUSH = 99,		/* v2    */
-	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
-	NFSERR_NOT_SYNC = 10002,	/*    v3 */
-	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
-	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
-	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
-	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
-	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
-	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
-	NFSERR_SAME = 10009,		/*       v4 */
-	NFSERR_DENIED = 10010,		/*       v4 */
-	NFSERR_EXPIRED = 10011,		/*       v4 */
-	NFSERR_LOCKED = 10012,		/*       v4 */
-	NFSERR_GRACE = 10013,		/*       v4 */
-	NFSERR_FHEXPIRED = 10014,	/*       v4 */
-	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
-	NFSERR_WRONGSEC = 10016,	/*       v4 */
-	NFSERR_CLID_INUSE = 10017,	/*       v4 */
-	NFSERR_RESOURCE = 10018,	/*       v4 */
-	NFSERR_MOVED = 10019,		/*       v4 */
-	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
-	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
-	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
-	NFSERR_STALE_STATEID = 10023,   /*       v4 */
-	NFSERR_OLD_STATEID = 10024,     /*       v4 */
-	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
-	NFSERR_BAD_SEQID = 10026,	/*       v4 */
-	NFSERR_NOT_SAME = 10027,	/*       v4 */
-	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
-	NFSERR_SYMLINK = 10029,		/*       v4 */
-	NFSERR_RESTOREFH = 10030,	/*       v4 */
-	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
-	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
-	NFSERR_NO_GRACE = 10033,	/*       v4 */
-	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
-	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
-	NFSERR_BAD_XDR = 10036,		/*       v4 */
-	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
-	NFSERR_OPENMODE = 10038,       /*       v4 */
-	NFSERR_BADOWNER = 10039,       /*       v4 */
-	NFSERR_BADCHAR = 10040,        /*       v4 */
-	NFSERR_BADNAME = 10041,        /*       v4 */
-	NFSERR_BAD_RANGE = 10042,      /*       v4 */
-	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
-	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
-	NFSERR_DEADLOCK = 10045,       /*       v4 */
-	NFSERR_FILE_OPEN = 10046,      /*       v4 */
-	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
-	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
-};
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-
-enum nfs_ftype {
-	NFNON = 0,
-	NFREG = 1,
-	NFDIR = 2,
-	NFBLK = 3,
-	NFCHR = 4,
-	NFLNK = 5,
-	NFSOCK = 6,
-	NFBAD = 7,
-	NFFIFO = 8
-};
-
-#ifdef __KERNEL__
 #include <linux/sunrpc/msg_prot.h>
 #include <linux/string.h>
+#include <uapi/linux/nfs.h>
 
 /*
  * This is the kernel NFS client file handle representation
@@ -169,5 +48,4 @@ enum nfs3_stable_how {
 	NFS_DATA_SYNC = 1,
 	NFS_FILE_SYNC = 2
 };
-#endif /* __KERNEL__ */
 #endif /* _LINUX_NFS_H */
diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h
index 6ccfe3b641e18f0522114758c8634a5fe84c4c0d..a778ad8e3afd8080c4427d9aae4e08495caa5e80 100644
--- a/include/linux/nfs3.h
+++ b/include/linux/nfs3.h
@@ -4,100 +4,10 @@
 #ifndef _LINUX_NFS3_H
 #define _LINUX_NFS3_H
 
-#define NFS3_PORT		2049
-#define NFS3_MAXDATA		32768
-#define NFS3_MAXPATHLEN		PATH_MAX
-#define NFS3_MAXNAMLEN		NAME_MAX
-#define NFS3_MAXGROUPS		16
-#define NFS3_FHSIZE		64
-#define NFS3_COOKIESIZE		4
-#define NFS3_CREATEVERFSIZE	8
-#define NFS3_COOKIEVERFSIZE	8
-#define NFS3_WRITEVERFSIZE	8
-#define NFS3_FIFO_DEV		(-1)
-#define NFS3MODE_FMT		0170000
-#define NFS3MODE_DIR		0040000
-#define NFS3MODE_CHR		0020000
-#define NFS3MODE_BLK		0060000
-#define NFS3MODE_REG		0100000
-#define NFS3MODE_LNK		0120000
-#define NFS3MODE_SOCK		0140000
-#define NFS3MODE_FIFO		0010000
+#include <uapi/linux/nfs3.h>
 
-/* Flags for access() call */
-#define NFS3_ACCESS_READ	0x0001
-#define NFS3_ACCESS_LOOKUP	0x0002
-#define NFS3_ACCESS_MODIFY	0x0004
-#define NFS3_ACCESS_EXTEND	0x0008
-#define NFS3_ACCESS_DELETE	0x0010
-#define NFS3_ACCESS_EXECUTE	0x0020
-#define NFS3_ACCESS_FULL	0x003f
-
-/* Flags for create mode */
-enum nfs3_createmode {
-	NFS3_CREATE_UNCHECKED = 0,
-	NFS3_CREATE_GUARDED = 1,
-	NFS3_CREATE_EXCLUSIVE = 2
-};
-
-/* NFSv3 file system properties */
-#define NFS3_FSF_LINK		0x0001
-#define NFS3_FSF_SYMLINK	0x0002
-#define NFS3_FSF_HOMOGENEOUS	0x0008
-#define NFS3_FSF_CANSETTIME	0x0010
-/* Some shorthands. See fs/nfsd/nfs3proc.c */
-#define NFS3_FSF_DEFAULT	0x001B
-#define NFS3_FSF_BILLYBOY	0x0018
-#define NFS3_FSF_READONLY	0x0008
-
-enum nfs3_ftype {
-	NF3NON  = 0,
-	NF3REG  = 1,
-	NF3DIR  = 2,
-	NF3BLK  = 3,
-	NF3CHR  = 4,
-	NF3LNK  = 5,
-	NF3SOCK = 6,
-	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
-	NF3BAD  = 8
-};
-
-struct nfs3_fh {
-	unsigned short size;
-	unsigned char  data[NFS3_FHSIZE];
-};
-
-#define NFS3_VERSION		3
-#define NFS3PROC_NULL		0
-#define NFS3PROC_GETATTR	1
-#define NFS3PROC_SETATTR	2
-#define NFS3PROC_LOOKUP		3
-#define NFS3PROC_ACCESS		4
-#define NFS3PROC_READLINK	5
-#define NFS3PROC_READ		6
-#define NFS3PROC_WRITE		7
-#define NFS3PROC_CREATE		8
-#define NFS3PROC_MKDIR		9
-#define NFS3PROC_SYMLINK	10
-#define NFS3PROC_MKNOD		11
-#define NFS3PROC_REMOVE		12
-#define NFS3PROC_RMDIR		13
-#define NFS3PROC_RENAME		14
-#define NFS3PROC_LINK		15
-#define NFS3PROC_READDIR	16
-#define NFS3PROC_READDIRPLUS	17
-#define NFS3PROC_FSSTAT		18
-#define NFS3PROC_FSINFO		19
-#define NFS3PROC_PATHCONF	20
-#define NFS3PROC_COMMIT		21
-
-#define NFS_MNT3_VERSION	3
- 
-
-#if defined(__KERNEL__)
 
 /* Number of 32bit words in post_op_attr */
 #define NFS3_POST_OP_ATTR_WORDS		22
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_NFS3_H */
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index af2d2fa30eee960a6b0f263f43e6b4a39ad5f245..e111fa419a4e3b5670dadc09a40ffa7b6072e09b 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -9,168 +9,11 @@
  *  Kendrick Smith <kmsmith@umich.edu>
  *  Andy Adamson   <andros@umich.edu>
  */
-
 #ifndef _LINUX_NFS4_H
 #define _LINUX_NFS4_H
 
-#include <linux/types.h>
-
-#define NFS4_BITMAP_SIZE	2
-#define NFS4_VERIFIER_SIZE	8
-#define NFS4_STATEID_SEQID_SIZE 4
-#define NFS4_STATEID_OTHER_SIZE 12
-#define NFS4_STATEID_SIZE	(NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
-#define NFS4_FHSIZE		128
-#define NFS4_MAXPATHLEN		PATH_MAX
-#define NFS4_MAXNAMLEN		NAME_MAX
-#define NFS4_OPAQUE_LIMIT	1024
-#define NFS4_MAX_SESSIONID_LEN	16
-
-#define NFS4_ACCESS_READ        0x0001
-#define NFS4_ACCESS_LOOKUP      0x0002
-#define NFS4_ACCESS_MODIFY      0x0004
-#define NFS4_ACCESS_EXTEND      0x0008
-#define NFS4_ACCESS_DELETE      0x0010
-#define NFS4_ACCESS_EXECUTE     0x0020
-
-#define NFS4_FH_PERSISTENT		0x0000
-#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
-#define NFS4_FH_VOLATILE_ANY		0x0002
-#define NFS4_FH_VOL_MIGRATION		0x0004
-#define NFS4_FH_VOL_RENAME		0x0008
-
-#define NFS4_OPEN_RESULT_CONFIRM 0x0002
-#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
-
-#define NFS4_SHARE_ACCESS_MASK	0x000F
-#define NFS4_SHARE_ACCESS_READ	0x0001
-#define NFS4_SHARE_ACCESS_WRITE	0x0002
-#define NFS4_SHARE_ACCESS_BOTH	0x0003
-#define NFS4_SHARE_DENY_READ	0x0001
-#define NFS4_SHARE_DENY_WRITE	0x0002
-#define NFS4_SHARE_DENY_BOTH	0x0003
-
-/* nfs41 */
-#define NFS4_SHARE_WANT_MASK		0xFF00
-#define NFS4_SHARE_WANT_NO_PREFERENCE	0x0000
-#define NFS4_SHARE_WANT_READ_DELEG	0x0100
-#define NFS4_SHARE_WANT_WRITE_DELEG	0x0200
-#define NFS4_SHARE_WANT_ANY_DELEG	0x0300
-#define NFS4_SHARE_WANT_NO_DELEG	0x0400
-#define NFS4_SHARE_WANT_CANCEL		0x0500
-
-#define NFS4_SHARE_WHEN_MASK		0xF0000
-#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL	0x10000
-#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED		0x20000
-
-#define NFS4_CDFC4_FORE	0x1
-#define NFS4_CDFC4_BACK 0x2
-#define NFS4_CDFC4_BOTH 0x3
-#define NFS4_CDFC4_FORE_OR_BOTH 0x3
-#define NFS4_CDFC4_BACK_OR_BOTH 0x7
-
-#define NFS4_CDFS4_FORE 0x1
-#define NFS4_CDFS4_BACK 0x2
-#define NFS4_CDFS4_BOTH 0x3
-
-#define NFS4_SET_TO_SERVER_TIME	0
-#define NFS4_SET_TO_CLIENT_TIME	1
-
-#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
-#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
-#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
-#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
-
-#define ACL4_SUPPORT_ALLOW_ACL 0x01
-#define ACL4_SUPPORT_DENY_ACL  0x02
-#define ACL4_SUPPORT_AUDIT_ACL 0x04
-#define ACL4_SUPPORT_ALARM_ACL 0x08
-
-#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
-#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
-#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
-#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
-#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
-#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
-#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
-
-#define NFS4_ACE_READ_DATA                    0x00000001
-#define NFS4_ACE_LIST_DIRECTORY               0x00000001
-#define NFS4_ACE_WRITE_DATA                   0x00000002
-#define NFS4_ACE_ADD_FILE                     0x00000002
-#define NFS4_ACE_APPEND_DATA                  0x00000004
-#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
-#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
-#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
-#define NFS4_ACE_EXECUTE                      0x00000020
-#define NFS4_ACE_DELETE_CHILD                 0x00000040
-#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
-#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
-#define NFS4_ACE_DELETE                       0x00010000
-#define NFS4_ACE_READ_ACL                     0x00020000
-#define NFS4_ACE_WRITE_ACL                    0x00040000
-#define NFS4_ACE_WRITE_OWNER                  0x00080000
-#define NFS4_ACE_SYNCHRONIZE                  0x00100000
-#define NFS4_ACE_GENERIC_READ                 0x00120081
-#define NFS4_ACE_GENERIC_WRITE                0x00160106
-#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
-#define NFS4_ACE_MASK_ALL                     0x001F01FF
-
-#define EXCHGID4_FLAG_SUPP_MOVED_REFER		0x00000001
-#define EXCHGID4_FLAG_SUPP_MOVED_MIGR		0x00000002
-#define EXCHGID4_FLAG_BIND_PRINC_STATEID	0x00000100
-
-#define EXCHGID4_FLAG_USE_NON_PNFS		0x00010000
-#define EXCHGID4_FLAG_USE_PNFS_MDS		0x00020000
-#define EXCHGID4_FLAG_USE_PNFS_DS		0x00040000
-#define EXCHGID4_FLAG_MASK_PNFS			0x00070000
-
-#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A	0x40000000
-#define EXCHGID4_FLAG_CONFIRMED_R		0x80000000
-/*
- * Since the validity of these bits depends on whether
- * they're set in the argument or response, have separate
- * invalid flag masks for arg (_A) and resp (_R).
- */
-#define EXCHGID4_FLAG_MASK_A			0x40070103
-#define EXCHGID4_FLAG_MASK_R			0x80070103
-
-#define SEQ4_STATUS_CB_PATH_DOWN		0x00000001
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING	0x00000002
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED	0x00000004
-#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED	0x00000008
-#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED	0x00000010
-#define SEQ4_STATUS_ADMIN_STATE_REVOKED		0x00000020
-#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED	0x00000040
-#define SEQ4_STATUS_LEASE_MOVED			0x00000080
-#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED	0x00000100
-#define SEQ4_STATUS_CB_PATH_DOWN_SESSION	0x00000200
-#define SEQ4_STATUS_BACKCHANNEL_FAULT		0x00000400
-
-#define NFS4_SECINFO_STYLE4_CURRENT_FH	0
-#define NFS4_SECINFO_STYLE4_PARENT	1
-
-#define NFS4_MAX_UINT64	(~(u64)0)
-
-/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
- * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
- */
-#define NFS4_MAX_OPS   8
-
-/* Our NFS4 client back channel server only wants the cb_sequene and the
- * actual operation per compound
- */
-#define NFS4_MAX_BACK_CHANNEL_OPS 2
-
-enum nfs4_acl_whotype {
-	NFS4_ACL_WHO_NAMED = 0,
-	NFS4_ACL_WHO_OWNER,
-	NFS4_ACL_WHO_GROUP,
-	NFS4_ACL_WHO_EVERYONE,
-};
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/nfs4.h>
 
 struct nfs4_ace {
 	uint32_t	type;
@@ -673,10 +516,3 @@ struct nfs4_deviceid {
 };
 
 #endif
-#endif
-
-/*
- * Local variables:
- *  c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 334a2f5f6bf167857cb621f4d71b7ea62f3481a7..1cc25682b20bdba4e0cac8cc6925910445104481 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -5,38 +5,11 @@
  *
  *  OS-specific nfs filesystem definitions and declarations
  */
-
 #ifndef _LINUX_NFS_FS_H
 #define _LINUX_NFS_FS_H
 
-#include <linux/magic.h>
-
-/* Default timeout values */
-#define NFS_DEF_UDP_TIMEO	(11)
-#define NFS_DEF_UDP_RETRANS	(3)
-#define NFS_DEF_TCP_TIMEO	(600)
-#define NFS_DEF_TCP_RETRANS	(2)
-
-#define NFS_MAX_UDP_TIMEOUT	(60*HZ)
-#define NFS_MAX_TCP_TIMEOUT	(600*HZ)
+#include <uapi/linux/nfs_fs.h>
 
-#define NFS_DEF_ACREGMIN	(3)
-#define NFS_DEF_ACREGMAX	(60)
-#define NFS_DEF_ACDIRMIN	(30)
-#define NFS_DEF_ACDIRMAX	(60)
-
-/*
- * When flushing a cluster of dirty pages, there can be different
- * strategies:
- */
-#define FLUSH_SYNC		1	/* file being synced, or contention */
-#define FLUSH_STABLE		4	/* commit to stable storage */
-#define FLUSH_LOWPRI		8	/* low priority background flush */
-#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
-#define FLUSH_COND_STABLE	32	/* conditional stable write - only stable
-					 * if everything fits in one RPC */
-
-#ifdef __KERNEL__
 
 /*
  * Enable dprintk() debugging support for nfs client.
@@ -613,29 +586,6 @@ nfs_fileid_to_ino_t(u64 fileid)
 
 #define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
 
-#endif /* __KERNEL__ */
-
-/*
- * NFS debug flags
- */
-#define NFSDBG_VFS		0x0001
-#define NFSDBG_DIRCACHE		0x0002
-#define NFSDBG_LOOKUPCACHE	0x0004
-#define NFSDBG_PAGECACHE	0x0008
-#define NFSDBG_PROC		0x0010
-#define NFSDBG_XDR		0x0020
-#define NFSDBG_FILE		0x0040
-#define NFSDBG_ROOT		0x0080
-#define NFSDBG_CALLBACK		0x0100
-#define NFSDBG_CLIENT		0x0200
-#define NFSDBG_MOUNT		0x0400
-#define NFSDBG_FSCACHE		0x0800
-#define NFSDBG_PNFS		0x1000
-#define NFSDBG_PNFS_LD		0x2000
-#define NFSDBG_STATE		0x4000
-#define NFSDBG_ALL		0xFFFF
-
-#ifdef __KERNEL__
 
 # undef ifdebug
 # ifdef NFS_DEBUG
@@ -645,6 +595,4 @@ nfs_fileid_to_ino_t(u64 fileid)
 #  define ifdebug(fac)		if (0)
 #  define NFS_IFDEBUG(x)
 # endif
-#endif /* __KERNEL */
-
 #endif
diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h
index ece91c57ad79d109c2c95c30d64f390201db0822..2dcef3ab58b6f87e7429200d5256eb56541b07f4 100644
--- a/include/linux/nfs_idmap.h
+++ b/include/linux/nfs_idmap.h
@@ -33,35 +33,11 @@
  *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-
 #ifndef NFS_IDMAP_H
 #define NFS_IDMAP_H
 
-#include <linux/types.h>
-
-/* XXX from bits/utmp.h  */
-#define IDMAP_NAMESZ  128
-
-#define IDMAP_TYPE_USER  0
-#define IDMAP_TYPE_GROUP 1
-
-#define IDMAP_CONV_IDTONAME 0
-#define IDMAP_CONV_NAMETOID 1
+#include <uapi/linux/nfs_idmap.h>
 
-#define IDMAP_STATUS_INVALIDMSG 0x01
-#define IDMAP_STATUS_AGAIN      0x02
-#define IDMAP_STATUS_LOOKUPFAIL 0x04
-#define IDMAP_STATUS_SUCCESS    0x08
-
-struct idmap_msg {
-	__u8  im_type;
-	__u8  im_conv;
-	char  im_name[IDMAP_NAMESZ];
-	__u32 im_id;
-	__u8  im_status;
-};
-
-#ifdef __KERNEL__
 
 /* Forward declaration to make this header independent of others */
 struct nfs_client;
@@ -97,6 +73,4 @@ int nfs_map_uid_to_name(const struct nfs_server *, __u32, char *, size_t);
 int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t);
 
 extern unsigned int nfs_idmap_cache_timeout;
-#endif /* __KERNEL__ */
-
 #endif /* NFS_IDMAP_H */
diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h
index fabcb1e5c460f240ff1f9c5e5b1d6d720505d7c5..5e69e67b31ab28bd5cb1bfc451687a36597f6b1f 100644
--- a/include/linux/nfsacl.h
+++ b/include/linux/nfsacl.h
@@ -6,30 +6,10 @@
 #ifndef __LINUX_NFSACL_H
 #define __LINUX_NFSACL_H
 
-#define NFS_ACL_PROGRAM	100227
-
-#define ACLPROC2_GETACL		1
-#define ACLPROC2_SETACL		2
-#define ACLPROC2_GETATTR	3
-#define ACLPROC2_ACCESS		4
-
-#define ACLPROC3_GETACL		1
-#define ACLPROC3_SETACL		2
-
-
-/* Flags for the getacl/setacl mode */
-#define NFS_ACL			0x0001
-#define NFS_ACLCNT		0x0002
-#define NFS_DFACL		0x0004
-#define NFS_DFACLCNT		0x0008
-
-/* Flag for Default ACL entries */
-#define NFS_ACL_DEFAULT		0x1000
-
-#ifdef __KERNEL__
 
 #include <linux/posix_acl.h>
 #include <linux/sunrpc/xdr.h>
+#include <uapi/linux/nfsacl.h>
 
 /* Maximum number of ACL entries over NFS */
 #define NFS_ACL_MAX_ENTRIES	1024
@@ -58,5 +38,4 @@ extern int
 nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt,
 	      struct posix_acl **pacl);
 
-#endif /* __KERNEL__ */
 #endif  /* __LINUX_NFSACL_H */
diff --git a/include/linux/nubus.h b/include/linux/nubus.h
index e137b3c486a7799f9f39b470f827db2ab00dc819..a8696bbdfbc477b95c06693f815a49354ae16054 100644
--- a/include/linux/nubus.h
+++ b/include/linux/nubus.h
@@ -8,236 +8,12 @@
   Some of the constants in here are from the corresponding
   NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
   rest of them on our own. */
-
 #ifndef LINUX_NUBUS_H
 #define LINUX_NUBUS_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <asm/nubus.h>
-#endif
-
-enum nubus_category {
-	NUBUS_CAT_BOARD          = 0x0001,
-	NUBUS_CAT_DISPLAY        = 0x0003,
-	NUBUS_CAT_NETWORK        = 0x0004,
-	NUBUS_CAT_COMMUNICATIONS = 0x0006,
-	NUBUS_CAT_FONT           = 0x0009,
-	NUBUS_CAT_CPU            = 0x000A,
-	/* For lack of a better name */
-	NUBUS_CAT_DUODOCK        = 0x0020
-};
-
-enum nubus_type_network {
-	NUBUS_TYPE_ETHERNET      = 0x0001,
-	NUBUS_TYPE_RS232         = 0x0002
-};
-
-enum nubus_type_display {
-	NUBUS_TYPE_VIDEO         = 0x0001
-};
-
-enum nubus_type_cpu {
-	NUBUS_TYPE_68020         = 0x0003,
-	NUBUS_TYPE_68030         = 0x0004,
-	NUBUS_TYPE_68040         = 0x0005
-};
-
-/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
- *  68030 motherboards: <10,4,0,24>
- *  68040 motherboards: <10,5,0,24>
- *  DuoDock Plus: <32,1,1,2>
- *
- *  Toby Frame Buffer card: <3,1,1,1>
- *  RBV built-in video (IIci): <3,1,1,24>
- *  Valkyrie built-in video (Q630): <3,1,1,46>
- *  Macintosh Display Card: <3,1,1,25>
- *  Sonora built-in video (P460): <3,1,1,34>
- *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
- *
- *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
- *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
- *  Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
- *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
- *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
- *   ROM on the above card: <2,1,0,0>
- *  Cabletron ethernet card: <4,1,1,265>
- *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
- *  Kinetics EtherPort IIN: <4,1,259,262>
- *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
- *
- *  Add your devices to the list!  You can obtain the "Slots" utility
- *  from Apple's FTP site at:
- *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
- *
- *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
- *  or from its distribution site: ftp://ftp.decismkr.com/dms
- */
-
-/* DrSW: Uniquely identifies the software interface to a board.  This
-   is usually the one you want to look at when writing a driver.  It's
-   not as useful as you think, though, because as we should know by
-   now (duh), "Apple Compatible" can mean a lot of things... */
-
-/* Add known DrSW values here */
-enum nubus_drsw {
-	/* NUBUS_CAT_DISPLAY */
-	NUBUS_DRSW_APPLE        = 0x0001,
-	NUBUS_DRSW_APPLE_HIRES  = 0x0013, /* MacII HiRes card driver */
-	
-	/* NUBUS_CAT_NETWORK */
-	NUBUS_DRSW_3COM         = 0x0000,
-	NUBUS_DRSW_CABLETRON    = 0x0001,
-	NUBUS_DRSW_SONIC_LC     = 0x0001,
-	NUBUS_DRSW_KINETICS     = 0x0103,
-	NUBUS_DRSW_ASANTE       = 0x0104,
-	NUBUS_DRSW_TECHWORKS    = 0x0109,
-	NUBUS_DRSW_DAYNA        = 0x010b,
-	NUBUS_DRSW_FARALLON     = 0x010c,
-	NUBUS_DRSW_APPLE_SN     = 0x010f,
-	NUBUS_DRSW_DAYNA2       = 0x0115,
-	NUBUS_DRSW_FOCUS        = 0x011a,
-	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
-	NUBUS_DRSW_DAYNA_LC     = 0x011e,
-
-	/* NUBUS_CAT_CPU */
-	NUBUS_DRSW_NONE         = 0x0000,
-};
-
-/* DrHW: Uniquely identifies the hardware interface to a board (or at
-   least, it should...  some video cards are known to incorrectly
-   identify themselves as Toby cards) */
-
-/* Add known DrHW values here */
-enum nubus_drhw {
-	/* NUBUS_CAT_DISPLAY */
-	NUBUS_DRHW_APPLE_TFB      = 0x0001, /* Toby frame buffer card */
-	NUBUS_DRHW_APPLE_WVC      = 0x0006, /* Apple Workstation Video Card */
-	NUBUS_DRHW_SIGMA_CLRMAX   = 0x0007, /* Sigma Design ColorMax */
-	NUBUS_DRHW_APPLE_SE30     = 0x0009, /* Apple SE/30 video */
-	NUBUS_DRHW_APPLE_HRVC     = 0x0013, /* Mac II High-Res Video Card */
-	NUBUS_DRHW_APPLE_PVC      = 0x0017, /* Mac II Portrait Video Card */
-	NUBUS_DRHW_APPLE_RBV1     = 0x0018, /* IIci RBV video */
-	NUBUS_DRHW_APPLE_MDC      = 0x0019, /* Macintosh Display Card */
-	NUBUS_DRHW_APPLE_SONORA   = 0x0022, /* Sonora built-in video */
-	NUBUS_DRHW_APPLE_24AC     = 0x002b, /* Mac 24AC Video Card */
-	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
-	NUBUS_DRHW_APPLE_JET      = 0x0029, /* Jet framebuffer (DuoDock) */
-	NUBUS_DRHW_SMAC_GFX       = 0x0105, /* SuperMac GFX */
-	NUBUS_DRHW_RASTER_CB264   = 0x013B, /* RasterOps ColorBoard 264 */
-	NUBUS_DRHW_MICRON_XCEED   = 0x0146, /* Micron Exceed color */
-	NUBUS_DRHW_RDIUS_GSC      = 0x0153, /* Radius GS/C */
-	NUBUS_DRHW_SMAC_SPEC8     = 0x017B, /* SuperMac Spectrum/8 */
-	NUBUS_DRHW_SMAC_SPEC24    = 0x017C, /* SuperMac Spectrum/24 */
-	NUBUS_DRHW_RASTER_CB364   = 0x026F, /* RasterOps ColorBoard 364 */
-	NUBUS_DRHW_RDIUS_DCGX     = 0x027C, /* Radius DirectColor/GX */
-	NUBUS_DRHW_RDIUS_PC8      = 0x0291, /* Radius PrecisionColor 8 */
-	NUBUS_DRHW_LAPIS_PCS8     = 0x0292, /* Lapis ProColorServer 8 */
-	NUBUS_DRHW_RASTER_24XLI   = 0x02A0, /* RasterOps 8/24 XLi */
-	NUBUS_DRHW_RASTER_PBPGT   = 0x02A5, /* RasterOps PaintBoard Prism GT */
-	NUBUS_DRHW_EMACH_FSX      = 0x02AE, /* E-Machines Futura SX */
-	NUBUS_DRHW_RASTER_24XLTV  = 0x02B7, /* RasterOps 24XLTV */
-	NUBUS_DRHW_SMAC_THUND24   = 0x02CB, /* SuperMac Thunder/24 */
-	NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
-	NUBUS_DRHW_RDIUS_PC24XP   = 0x0406, /* Radius PrecisionColor 24Xp */
-	NUBUS_DRHW_RDIUS_PC24X    = 0x040A, /* Radius PrecisionColor 24X */
-	NUBUS_DRHW_RDIUS_PC8XJ    = 0x040B, /* Radius PrecisionColor 8XJ */
-	
-	/* NUBUS_CAT_NETWORK */
-	NUBUS_DRHW_INTERLAN       = 0x0100,
-	NUBUS_DRHW_SMC9194        = 0x0101,
-	NUBUS_DRHW_KINETICS       = 0x0106,
-	NUBUS_DRHW_CABLETRON      = 0x0109,
-	NUBUS_DRHW_ASANTE_LC      = 0x010f,
-	NUBUS_DRHW_SONIC          = 0x0110,
-	NUBUS_DRHW_TECHWORKS      = 0x0112,
-	NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
-	NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
-	NUBUS_DRHW_FOCUS          = 0x011c,
-	NUBUS_DRHW_SONNET         = 0x011d,
-};
+#include <uapi/linux/nubus.h>
 
-/* Resource IDs: These are the identifiers for the various weird and
-   wonderful tidbits of information that may or may not reside in the
-   NuBus ROM directory. */
-enum nubus_res_id {
-	NUBUS_RESID_TYPE         = 0x0001,
-	NUBUS_RESID_NAME         = 0x0002,
-	NUBUS_RESID_ICON         = 0x0003,
-	NUBUS_RESID_DRVRDIR      = 0x0004,
-	NUBUS_RESID_LOADREC      = 0x0005,
-	NUBUS_RESID_BOOTREC      = 0x0006,
-	NUBUS_RESID_FLAGS        = 0x0007,
-	NUBUS_RESID_HWDEVID      = 0x0008,
-	NUBUS_RESID_MINOR_BASEOS = 0x000a,
-	NUBUS_RESID_MINOR_LENGTH = 0x000b,
-	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
-	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
-	NUBUS_RESID_CICN         = 0x000f,
-	NUBUS_RESID_ICL8         = 0x0010,
-	NUBUS_RESID_ICL4         = 0x0011,
-};
-
-/* Category-specific resources. */
-enum nubus_board_res_id {
-	NUBUS_RESID_BOARDID      = 0x0020,
-	NUBUS_RESID_PRAMINITDATA = 0x0021,
-	NUBUS_RESID_PRIMARYINIT  = 0x0022,
-	NUBUS_RESID_TIMEOUTCONST = 0x0023,
-	NUBUS_RESID_VENDORINFO   = 0x0024,
-	NUBUS_RESID_BOARDFLAGS   = 0x0025,
-	NUBUS_RESID_SECONDINIT   = 0x0026,
-
-	/* Not sure why Apple put these next two in here */
-	NUBUS_RESID_VIDNAMES     = 0x0041,
-	NUBUS_RESID_VIDMODES     = 0x007e
-};
-
-/* Fields within the vendor info directory */
-enum nubus_vendor_res_id {
-	NUBUS_RESID_VEND_ID     = 0x0001,
-	NUBUS_RESID_VEND_SERIAL = 0x0002,
-	NUBUS_RESID_VEND_REV    = 0x0003,
-	NUBUS_RESID_VEND_PART   = 0x0004,
-	NUBUS_RESID_VEND_DATE   = 0x0005
-};
-
-enum nubus_net_res_id {
-	NUBUS_RESID_MAC_ADDRESS  = 0x0080
-};
-
-enum nubus_cpu_res_id {
-	NUBUS_RESID_MEMINFO      = 0x0081,
-	NUBUS_RESID_ROMINFO      = 0x0082
-};
-
-enum nubus_display_res_id {
-	NUBUS_RESID_GAMMADIR    = 0x0040,
-	NUBUS_RESID_FIRSTMODE   = 0x0080,
-	NUBUS_RESID_SECONDMODE  = 0x0081,
-	NUBUS_RESID_THIRDMODE   = 0x0082,
-	NUBUS_RESID_FOURTHMODE  = 0x0083,
-	NUBUS_RESID_FIFTHMODE   = 0x0084,
-	NUBUS_RESID_SIXTHMODE   = 0x0085
-};
-
-struct nubus_dir
-{
-	unsigned char *base;
-	unsigned char *ptr;
-	int done;
-	int mask;
-};
-
-struct nubus_dirent
-{
-	unsigned char *base;
-	unsigned char type;
-	__u32 data;	/* Actually 24bits used */
-	int mask;
-};
-
-#ifdef __KERNEL__
 struct nubus_board {
 	struct nubus_board* next;
 	struct nubus_dev* first_dev;
@@ -352,12 +128,4 @@ void nubus_get_rsrc_mem(void* dest,
 void nubus_get_rsrc_str(void* dest,
 			const struct nubus_dirent *dirent,
 			int maxlen);
-#endif /* __KERNEL__ */
-
-/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
-static inline void *nubus_slot_addr(int slot)
-{
-	return (void *)(0xF0000000|(slot<<24));
-}
-
 #endif /* LINUX_NUBUS_H */
diff --git a/include/linux/nvram.h b/include/linux/nvram.h
index 9189829c131c3051a0b3087b1d1596dcfa292954..cf0ff555a6ac486902d7dc27b977452fcd0458cf 100644
--- a/include/linux/nvram.h
+++ b/include/linux/nvram.h
@@ -1,18 +1,8 @@
 #ifndef _LINUX_NVRAM_H
 #define _LINUX_NVRAM_H
 
-#include <linux/ioctl.h>
+#include <uapi/linux/nvram.h>
 
-/* /dev/nvram ioctls */
-#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
-#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
-
-/* for all current systems, this is where NVRAM starts */
-#define NVRAM_FIRST_BYTE    14
-/* all these functions expect an NVRAM offset, not an absolute */
-#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
-
-#ifdef __KERNEL__
 /* __foo is foo without grabbing the rtc_lock - get it yourself */
 extern unsigned char __nvram_read_byte(int i);
 extern unsigned char nvram_read_byte(int i);
@@ -20,6 +10,4 @@ extern void __nvram_write_byte(unsigned char c, int i);
 extern void nvram_write_byte(unsigned char c, int i);
 extern int __nvram_check_checksum(void);
 extern int nvram_check_checksum(void);
-#endif
-
 #endif  /* _LINUX_NVRAM_H */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 85af8184691a39d4b6c9dd2d0fdd32decb213ad8..d1f4dccaeede3294e49076acc2637db4a52b77f5 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -20,205 +20,11 @@
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
-
 #ifndef __LINUX_OMAPFB_H__
 #define __LINUX_OMAPFB_H__
 
-#include <linux/fb.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
-#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
-#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
-#define OMAPFB_WAITFORGO	OMAP_IO(60)
-#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
-#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
-#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-#define OMAPFB_MEM_IDX_ENABLED	0x80
-#define OMAPFB_MEM_IDX_MASK	0x7f
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-
-	OMAPFB_COLOR_ARGB16,
-	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
-	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
-	OMAPFB_COLOR_ARGB32,
-	OMAPFB_COLOR_RGBA32,
-	OMAPFB_COLOR_RGBX32,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
+#include <uapi/linux/omapfb.h>
 
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  mem_idx;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-struct omapfb_memory_read {
-	__u16 x;
-	__u16 y;
-	__u16 w;
-	__u16 h;
-	size_t buffer_size;
-	void __user *buffer;
-};
-
-struct omapfb_ovl_colormode {
-	__u8 overlay_idx;
-	__u8 mode_idx;
-	__u32 bits_per_pixel;
-	__u32 nonstd;
-	struct fb_bitfield red;
-	struct fb_bitfield green;
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;
-};
-
-struct omapfb_vram_info {
-	__u32 total;
-	__u32 free;
-	__u32 largest_free_block;
-	__u32 reserved[5];
-};
-
-struct omapfb_tearsync_info {
-	__u8 enabled;
-	__u8 reserved1[3];
-	__u16 line;
-	__u16 reserved2;
-};
-
-struct omapfb_display_info {
-	__u16 xres;
-	__u16 yres;
-	__u32 width;	/* phys width of the display in micrometers */
-	__u32 height;	/* phys height of the display in micrometers */
-	__u32 reserved[5];
-};
-
-#ifdef __KERNEL__
 
 struct omap_lcd_config {
 	char panel_name[16];
@@ -233,6 +39,4 @@ struct omapfb_platform_data {
 
 void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
 
-#endif
-
 #endif /* __OMAPFB_H */
diff --git a/include/linux/oom.h b/include/linux/oom.h
index d36a8221f58be3ac51ae37730469c380a433149e..fb9826847b89184d1e3c99b00c0dfcf0f096e1f9 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -1,18 +1,11 @@
 #ifndef __INCLUDE_LINUX_OOM_H
 #define __INCLUDE_LINUX_OOM_H
 
-/*
- * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
- * pid.
- */
-#define OOM_SCORE_ADJ_MIN	(-1000)
-#define OOM_SCORE_ADJ_MAX	1000
-
-#ifdef __KERNEL__
 
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/nodemask.h>
+#include <uapi/linux/oom.h>
 
 struct zonelist;
 struct notifier_block;
@@ -82,5 +75,4 @@ extern struct task_struct *find_lock_task_mm(struct task_struct *p);
 extern int sysctl_oom_dump_tasks;
 extern int sysctl_oom_kill_allocating_task;
 extern int sysctl_panic_on_oom;
-#endif /* __KERNEL__*/
 #endif /* _INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 106c2ca9440be2f17a51d19cbd43969a5056454e..c22f12547324e2bcc090f2e4022a8fedea2b3b53 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -3,96 +3,9 @@
  * the GNU Free Documentation License, Version 1.1 or any later version
  * published by the Free Software Foundation.
  */
-
 #ifndef _PARPORT_H_
 #define _PARPORT_H_
 
-/* Start off with user-visible constants */
-
-/* Maximum of 16 ports per machine */
-#define PARPORT_MAX  16
-
-/* Magic numbers */
-#define PARPORT_IRQ_NONE  -1
-#define PARPORT_DMA_NONE  -1
-#define PARPORT_IRQ_AUTO  -2
-#define PARPORT_DMA_AUTO  -2
-#define PARPORT_DMA_NOFIFO -3
-#define PARPORT_DISABLE   -2
-#define PARPORT_IRQ_PROBEONLY -3
-#define PARPORT_IOHI_AUTO -1
-
-#define PARPORT_CONTROL_STROBE    0x1
-#define PARPORT_CONTROL_AUTOFD    0x2
-#define PARPORT_CONTROL_INIT      0x4
-#define PARPORT_CONTROL_SELECT    0x8
-
-#define PARPORT_STATUS_ERROR      0x8
-#define PARPORT_STATUS_SELECT     0x10
-#define PARPORT_STATUS_PAPEROUT   0x20
-#define PARPORT_STATUS_ACK        0x40
-#define PARPORT_STATUS_BUSY       0x80
-
-/* Type classes for Plug-and-Play probe.  */
-typedef enum {
-	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
-	PARPORT_CLASS_PRINTER,
-	PARPORT_CLASS_MODEM,
-	PARPORT_CLASS_NET,
-	PARPORT_CLASS_HDC,              /* Hard disk controller */
-	PARPORT_CLASS_PCMCIA,
-	PARPORT_CLASS_MEDIA,            /* Multimedia device */
-	PARPORT_CLASS_FDC,              /* Floppy disk controller */
-	PARPORT_CLASS_PORTS,
-	PARPORT_CLASS_SCANNER,
-	PARPORT_CLASS_DIGCAM,
-	PARPORT_CLASS_OTHER,            /* Anything else */
-	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
-	PARPORT_CLASS_SCSIADAPTER
-} parport_device_class;
-
-/* The "modes" entry in parport is a bit field representing the
-   capabilities of the hardware. */
-#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
-#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
-#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
-#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
-#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
-#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
-#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
-
-/* IEEE1284 modes: 
-   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
-   'extensibility request' values.  Others are special.
-   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
-#define IEEE1284_MODE_NIBBLE             0
-#define IEEE1284_MODE_BYTE              (1<<0)
-#define IEEE1284_MODE_COMPAT            (1<<8)
-#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
-#define IEEE1284_MODE_ECP               (1<<4)
-#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
-#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
-#define IEEE1284_MODE_EPP               (1<<6)
-#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
-#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
-#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
-#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
-						 * extensibility link to
-						 * be requested, using
-						 * bits 0-6. */
-
-/* For the benefit of parport_read/write, you can use these with
- * parport_negotiate to use address operations.  They have no effect
- * other than to make parport_read/write use address transfers. */
-#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
-#define IEEE1284_DATA			 0	/* So is this */
-
-/* Flags for block transfer operations. */
-#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
-#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
-
-/* The rest is for the kernel only */
-#ifdef __KERNEL__
 
 #include <linux/jiffies.h>
 #include <linux/proc_fs.h>
@@ -101,6 +14,7 @@ typedef enum {
 #include <linux/irqreturn.h>
 #include <linux/semaphore.h>
 #include <asm/ptrace.h>
+#include <uapi/linux/parport.h>
 
 /* Define this later. */
 struct parport;
@@ -564,5 +478,4 @@ extern int parport_device_proc_unregister(struct pardevice *device);
 extern unsigned long parport_default_timeslice;
 extern int parport_default_spintime;
 
-#endif /* __KERNEL__ */
 #endif /* _PARPORT_H_ */
diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h
index aefda0ec6e627d26d8ec7394f26d5aa01f0d37fd..97a919fc9927005bb976b654de32ba8a3909f999 100644
--- a/include/linux/patchkey.h
+++ b/include/linux/patchkey.h
@@ -9,22 +9,12 @@
  * Do not include this file directly.  Please use <sys/soundcard.h> instead.
  * For kernel code, use <linux/soundcard.h>
  */
-
-#ifndef _LINUX_PATCHKEY_H_INDIRECT
-#error "patchkey.h included directly"
-#endif
-
 #ifndef _LINUX_PATCHKEY_H
 #define _LINUX_PATCHKEY_H
 
-/* Endian macros. */
-#ifdef __KERNEL__
 #  include <asm/byteorder.h>
-#else
-#  include <endian.h>
-#endif
+#include <uapi/linux/patchkey.h>
 
-#if defined(__KERNEL__)
 #  if defined(__BIG_ENDIAN)
 #    define _PATCHKEY(id) (0xfd00|id)
 #  elif defined(__LITTLE_ENDIAN)
@@ -32,16 +22,4 @@
 #  else
 #    error "could not determine byte order"
 #  endif
-#else
-#if defined(__BYTE_ORDER)
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#    define _PATCHKEY(id) (0xfd00|id)
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#    define _PATCHKEY(id) ((id<<8)|0x00fd)
-#  else
-#    error "could not determine byte order"
-#  endif
-#endif
-#endif
-
 #endif /* _LINUX_PATCHKEY_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index be1de01de1c4accc7b97c9ba9f782dc9809a2592..ee2179546c63b98c2fb8441e03a1f9481ef592b2 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -13,32 +13,9 @@
  *	PCI to PCI Bridge Specification
  *	PCI System Design Guide
  */
-
 #ifndef LINUX_PCI_H
 #define LINUX_PCI_H
 
-#include <linux/pci_regs.h>	/* The pci register defines */
-
-/*
- * The PCI interface treats multi-function devices as independent
- * devices.  The slot/function address of each device is encoded
- * in a single byte as follows:
- *
- *	7:3 = slot
- *	2:0 = function
- */
-#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
-#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
-#define PCI_FUNC(devfn)		((devfn) & 0x07)
-
-/* Ioctls for /proc/bus/pci/X/Y nodes. */
-#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
-#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
-#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
-#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
-#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
-
-#ifdef __KERNEL__
 
 #include <linux/mod_devicetable.h>
 
@@ -53,6 +30,7 @@
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/irqreturn.h>
+#include <uapi/linux/pci.h>
 
 /* Include the ID list */
 #include <linux/pci_ids.h>
@@ -1831,5 +1809,4 @@ static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev)
  */
 struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
 
-#endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index b4166cdfa7a2cd991019a1fe764323b22ecefa2a..2e902359aee596f128dee568d06e0e0ab3149dfe 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -14,605 +14,8 @@
 #ifndef _LINUX_PERF_EVENT_H
 #define _LINUX_PERF_EVENT_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/perf_event.h>
 
-/*
- * User-space ABI bits:
- */
-
-/*
- * attr.type
- */
-enum perf_type_id {
-	PERF_TYPE_HARDWARE			= 0,
-	PERF_TYPE_SOFTWARE			= 1,
-	PERF_TYPE_TRACEPOINT			= 2,
-	PERF_TYPE_HW_CACHE			= 3,
-	PERF_TYPE_RAW				= 4,
-	PERF_TYPE_BREAKPOINT			= 5,
-
-	PERF_TYPE_MAX,				/* non-ABI */
-};
-
-/*
- * Generalized performance event event_id types, used by the
- * attr.event_id parameter of the sys_perf_event_open()
- * syscall:
- */
-enum perf_hw_id {
-	/*
-	 * Common hardware events, generalized by the kernel:
-	 */
-	PERF_COUNT_HW_CPU_CYCLES		= 0,
-	PERF_COUNT_HW_INSTRUCTIONS		= 1,
-	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
-	PERF_COUNT_HW_CACHE_MISSES		= 3,
-	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
-	PERF_COUNT_HW_BRANCH_MISSES		= 5,
-	PERF_COUNT_HW_BUS_CYCLES		= 6,
-	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
-	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
-	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
-
-	PERF_COUNT_HW_MAX,			/* non-ABI */
-};
-
-/*
- * Generalized hardware cache events:
- *
- *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
- *       { read, write, prefetch } x
- *       { accesses, misses }
- */
-enum perf_hw_cache_id {
-	PERF_COUNT_HW_CACHE_L1D			= 0,
-	PERF_COUNT_HW_CACHE_L1I			= 1,
-	PERF_COUNT_HW_CACHE_LL			= 2,
-	PERF_COUNT_HW_CACHE_DTLB		= 3,
-	PERF_COUNT_HW_CACHE_ITLB		= 4,
-	PERF_COUNT_HW_CACHE_BPU			= 5,
-	PERF_COUNT_HW_CACHE_NODE		= 6,
-
-	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
-};
-
-enum perf_hw_cache_op_id {
-	PERF_COUNT_HW_CACHE_OP_READ		= 0,
-	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
-	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
-
-	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
-};
-
-enum perf_hw_cache_op_result_id {
-	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
-	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
-
-	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
-};
-
-/*
- * Special "software" events provided by the kernel, even if the hardware
- * does not support performance events. These events measure various
- * physical and sw events of the kernel (and allow the profiling of them as
- * well):
- */
-enum perf_sw_ids {
-	PERF_COUNT_SW_CPU_CLOCK			= 0,
-	PERF_COUNT_SW_TASK_CLOCK		= 1,
-	PERF_COUNT_SW_PAGE_FAULTS		= 2,
-	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
-	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
-	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
-	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
-	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
-	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
-
-	PERF_COUNT_SW_MAX,			/* non-ABI */
-};
-
-/*
- * Bits that can be set in attr.sample_type to request information
- * in the overflow packets.
- */
-enum perf_event_sample_format {
-	PERF_SAMPLE_IP				= 1U << 0,
-	PERF_SAMPLE_TID				= 1U << 1,
-	PERF_SAMPLE_TIME			= 1U << 2,
-	PERF_SAMPLE_ADDR			= 1U << 3,
-	PERF_SAMPLE_READ			= 1U << 4,
-	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
-	PERF_SAMPLE_ID				= 1U << 6,
-	PERF_SAMPLE_CPU				= 1U << 7,
-	PERF_SAMPLE_PERIOD			= 1U << 8,
-	PERF_SAMPLE_STREAM_ID			= 1U << 9,
-	PERF_SAMPLE_RAW				= 1U << 10,
-	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
-	PERF_SAMPLE_REGS_USER			= 1U << 12,
-	PERF_SAMPLE_STACK_USER			= 1U << 13,
-
-	PERF_SAMPLE_MAX = 1U << 14,		/* non-ABI */
-};
-
-/*
- * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
- *
- * If the user does not pass priv level information via branch_sample_type,
- * the kernel uses the event's priv level. Branch and event priv levels do
- * not have to match. Branch priv level is checked for permissions.
- *
- * The branch types can be combined, however BRANCH_ANY covers all types
- * of branches and therefore it supersedes all the other types.
- */
-enum perf_branch_sample_type {
-	PERF_SAMPLE_BRANCH_USER		= 1U << 0, /* user branches */
-	PERF_SAMPLE_BRANCH_KERNEL	= 1U << 1, /* kernel branches */
-	PERF_SAMPLE_BRANCH_HV		= 1U << 2, /* hypervisor branches */
-
-	PERF_SAMPLE_BRANCH_ANY		= 1U << 3, /* any branch types */
-	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << 4, /* any call branch */
-	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << 5, /* any return branch */
-	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << 6, /* indirect calls */
-
-	PERF_SAMPLE_BRANCH_MAX		= 1U << 7, /* non-ABI */
-};
-
-#define PERF_SAMPLE_BRANCH_PLM_ALL \
-	(PERF_SAMPLE_BRANCH_USER|\
-	 PERF_SAMPLE_BRANCH_KERNEL|\
-	 PERF_SAMPLE_BRANCH_HV)
-
-/*
- * Values to determine ABI of the registers dump.
- */
-enum perf_sample_regs_abi {
-	PERF_SAMPLE_REGS_ABI_NONE	= 0,
-	PERF_SAMPLE_REGS_ABI_32		= 1,
-	PERF_SAMPLE_REGS_ABI_64		= 2,
-};
-
-/*
- * The format of the data returned by read() on a perf event fd,
- * as specified by attr.read_format:
- *
- * struct read_format {
- *	{ u64		value;
- *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- *	  { u64		id;           } && PERF_FORMAT_ID
- *	} && !PERF_FORMAT_GROUP
- *
- *	{ u64		nr;
- *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- *	  { u64		value;
- *	    { u64	id;           } && PERF_FORMAT_ID
- *	  }		cntr[nr];
- *	} && PERF_FORMAT_GROUP
- * };
- */
-enum perf_event_read_format {
-	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
-	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
-	PERF_FORMAT_ID				= 1U << 2,
-	PERF_FORMAT_GROUP			= 1U << 3,
-
-	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
-};
-
-#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
-#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
-#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
-#define PERF_ATTR_SIZE_VER3	96	/* add: sample_regs_user */
-					/* add: sample_stack_user */
-
-/*
- * Hardware event_id to monitor via a performance monitoring event:
- */
-struct perf_event_attr {
-
-	/*
-	 * Major type: hardware/software/tracepoint/etc.
-	 */
-	__u32			type;
-
-	/*
-	 * Size of the attr structure, for fwd/bwd compat.
-	 */
-	__u32			size;
-
-	/*
-	 * Type specific configuration information.
-	 */
-	__u64			config;
-
-	union {
-		__u64		sample_period;
-		__u64		sample_freq;
-	};
-
-	__u64			sample_type;
-	__u64			read_format;
-
-	__u64			disabled       :  1, /* off by default        */
-				inherit	       :  1, /* children inherit it   */
-				pinned	       :  1, /* must always be on PMU */
-				exclusive      :  1, /* only group on PMU     */
-				exclude_user   :  1, /* don't count user      */
-				exclude_kernel :  1, /* ditto kernel          */
-				exclude_hv     :  1, /* ditto hypervisor      */
-				exclude_idle   :  1, /* don't count when idle */
-				mmap           :  1, /* include mmap data     */
-				comm	       :  1, /* include comm data     */
-				freq           :  1, /* use freq, not period  */
-				inherit_stat   :  1, /* per task counts       */
-				enable_on_exec :  1, /* next exec enables     */
-				task           :  1, /* trace fork/exit       */
-				watermark      :  1, /* wakeup_watermark      */
-				/*
-				 * precise_ip:
-				 *
-				 *  0 - SAMPLE_IP can have arbitrary skid
-				 *  1 - SAMPLE_IP must have constant skid
-				 *  2 - SAMPLE_IP requested to have 0 skid
-				 *  3 - SAMPLE_IP must have 0 skid
-				 *
-				 *  See also PERF_RECORD_MISC_EXACT_IP
-				 */
-				precise_ip     :  2, /* skid constraint       */
-				mmap_data      :  1, /* non-exec mmap data    */
-				sample_id_all  :  1, /* sample_type all events */
-
-				exclude_host   :  1, /* don't count in host   */
-				exclude_guest  :  1, /* don't count in guest  */
-
-				exclude_callchain_kernel : 1, /* exclude kernel callchains */
-				exclude_callchain_user   : 1, /* exclude user callchains */
-
-				__reserved_1   : 41;
-
-	union {
-		__u32		wakeup_events;	  /* wakeup every n events */
-		__u32		wakeup_watermark; /* bytes before wakeup   */
-	};
-
-	__u32			bp_type;
-	union {
-		__u64		bp_addr;
-		__u64		config1; /* extension of config */
-	};
-	union {
-		__u64		bp_len;
-		__u64		config2; /* extension of config1 */
-	};
-	__u64	branch_sample_type; /* enum perf_branch_sample_type */
-
-	/*
-	 * Defines set of user regs to dump on samples.
-	 * See asm/perf_regs.h for details.
-	 */
-	__u64	sample_regs_user;
-
-	/*
-	 * Defines size of the user stack to dump on samples.
-	 */
-	__u32	sample_stack_user;
-
-	/* Align to u64. */
-	__u32	__reserved_2;
-};
-
-#define perf_flags(attr)	(*(&(attr)->read_format + 1))
-
-/*
- * Ioctls that can be done on a perf event fd:
- */
-#define PERF_EVENT_IOC_ENABLE		_IO ('$', 0)
-#define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
-#define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
-#define PERF_EVENT_IOC_RESET		_IO ('$', 3)
-#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
-#define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
-#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
-
-enum perf_event_ioc_flags {
-	PERF_IOC_FLAG_GROUP		= 1U << 0,
-};
-
-/*
- * Structure of the page that can be mapped via mmap
- */
-struct perf_event_mmap_page {
-	__u32	version;		/* version number of this structure */
-	__u32	compat_version;		/* lowest version this is compat with */
-
-	/*
-	 * Bits needed to read the hw events in user-space.
-	 *
-	 *   u32 seq, time_mult, time_shift, idx, width;
-	 *   u64 count, enabled, running;
-	 *   u64 cyc, time_offset;
-	 *   s64 pmc = 0;
-	 *
-	 *   do {
-	 *     seq = pc->lock;
-	 *     barrier()
-	 *
-	 *     enabled = pc->time_enabled;
-	 *     running = pc->time_running;
-	 *
-	 *     if (pc->cap_usr_time && enabled != running) {
-	 *       cyc = rdtsc();
-	 *       time_offset = pc->time_offset;
-	 *       time_mult   = pc->time_mult;
-	 *       time_shift  = pc->time_shift;
-	 *     }
-	 *
-	 *     idx = pc->index;
-	 *     count = pc->offset;
-	 *     if (pc->cap_usr_rdpmc && idx) {
-	 *       width = pc->pmc_width;
-	 *       pmc = rdpmc(idx - 1);
-	 *     }
-	 *
-	 *     barrier();
-	 *   } while (pc->lock != seq);
-	 *
-	 * NOTE: for obvious reason this only works on self-monitoring
-	 *       processes.
-	 */
-	__u32	lock;			/* seqlock for synchronization */
-	__u32	index;			/* hardware event identifier */
-	__s64	offset;			/* add to hardware event value */
-	__u64	time_enabled;		/* time event active */
-	__u64	time_running;		/* time event on cpu */
-	union {
-		__u64	capabilities;
-		__u64	cap_usr_time  : 1,
-			cap_usr_rdpmc : 1,
-			cap_____res   : 62;
-	};
-
-	/*
-	 * If cap_usr_rdpmc this field provides the bit-width of the value
-	 * read using the rdpmc() or equivalent instruction. This can be used
-	 * to sign extend the result like:
-	 *
-	 *   pmc <<= 64 - width;
-	 *   pmc >>= 64 - width; // signed shift right
-	 *   count += pmc;
-	 */
-	__u16	pmc_width;
-
-	/*
-	 * If cap_usr_time the below fields can be used to compute the time
-	 * delta since time_enabled (in ns) using rdtsc or similar.
-	 *
-	 *   u64 quot, rem;
-	 *   u64 delta;
-	 *
-	 *   quot = (cyc >> time_shift);
-	 *   rem = cyc & ((1 << time_shift) - 1);
-	 *   delta = time_offset + quot * time_mult +
-	 *              ((rem * time_mult) >> time_shift);
-	 *
-	 * Where time_offset,time_mult,time_shift and cyc are read in the
-	 * seqcount loop described above. This delta can then be added to
-	 * enabled and possible running (if idx), improving the scaling:
-	 *
-	 *   enabled += delta;
-	 *   if (idx)
-	 *     running += delta;
-	 *
-	 *   quot = count / running;
-	 *   rem  = count % running;
-	 *   count = quot * enabled + (rem * enabled) / running;
-	 */
-	__u16	time_shift;
-	__u32	time_mult;
-	__u64	time_offset;
-
-		/*
-		 * Hole for extension of the self monitor capabilities
-		 */
-
-	__u64	__reserved[120];	/* align to 1k */
-
-	/*
-	 * Control data for the mmap() data buffer.
-	 *
-	 * User-space reading the @data_head value should issue an rmb(), on
-	 * SMP capable platforms, after reading this value -- see
-	 * perf_event_wakeup().
-	 *
-	 * When the mapping is PROT_WRITE the @data_tail value should be
-	 * written by userspace to reflect the last read data. In this case
-	 * the kernel will not over-write unread data.
-	 */
-	__u64   data_head;		/* head in the data section */
-	__u64	data_tail;		/* user-space written tail */
-};
-
-#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
-#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
-#define PERF_RECORD_MISC_KERNEL			(1 << 0)
-#define PERF_RECORD_MISC_USER			(2 << 0)
-#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
-#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
-#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
-
-/*
- * Indicates that the content of PERF_SAMPLE_IP points to
- * the actual instruction that triggered the event. See also
- * perf_event_attr::precise_ip.
- */
-#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
-/*
- * Reserve the last bit to indicate some extended misc field
- */
-#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
-
-struct perf_event_header {
-	__u32	type;
-	__u16	misc;
-	__u16	size;
-};
-
-enum perf_event_type {
-
-	/*
-	 * If perf_event_attr.sample_id_all is set then all event types will
-	 * have the sample_type selected fields related to where/when
-	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
-	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
-	 * the perf_event_header and the fields already present for the existing
-	 * fields, i.e. at the end of the payload. That way a newer perf.data
-	 * file will be supported by older perf tools, with these new optional
-	 * fields being ignored.
-	 *
-	 * The MMAP events record the PROT_EXEC mappings so that we can
-	 * correlate userspace IPs to code. They have the following structure:
-	 *
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	u32				pid, tid;
-	 *	u64				addr;
-	 *	u64				len;
-	 *	u64				pgoff;
-	 *	char				filename[];
-	 * };
-	 */
-	PERF_RECORD_MMAP			= 1,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u64				id;
-	 *	u64				lost;
-	 * };
-	 */
-	PERF_RECORD_LOST			= 2,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	u32				pid, tid;
-	 *	char				comm[];
-	 * };
-	 */
-	PERF_RECORD_COMM			= 3,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, ppid;
-	 *	u32				tid, ptid;
-	 *	u64				time;
-	 * };
-	 */
-	PERF_RECORD_EXIT			= 4,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u64				time;
-	 *	u64				id;
-	 *	u64				stream_id;
-	 * };
-	 */
-	PERF_RECORD_THROTTLE			= 5,
-	PERF_RECORD_UNTHROTTLE			= 6,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, ppid;
-	 *	u32				tid, ptid;
-	 *	u64				time;
-	 * };
-	 */
-	PERF_RECORD_FORK			= 7,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, tid;
-	 *
-	 *	struct read_format		values;
-	 * };
-	 */
-	PERF_RECORD_READ			= 8,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
-	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
-	 *	{ u64			time;     } && PERF_SAMPLE_TIME
-	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
-	 *	{ u64			id;	  } && PERF_SAMPLE_ID
-	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
-	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
-	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
-	 *
-	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
-	 *
-	 *	{ u64			nr,
-	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
-	 *
-	 *	#
-	 *	# The RAW record below is opaque data wrt the ABI
-	 *	#
-	 *	# That is, the ABI doesn't make any promises wrt to
-	 *	# the stability of its content, it may vary depending
-	 *	# on event, hardware, kernel version and phase of
-	 *	# the moon.
-	 *	#
-	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
-	 *	#
-	 *
-	 *	{ u32			size;
-	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
-	 *
-	 *	{ u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
-	 *
-	 * 	{ u64			abi; # enum perf_sample_regs_abi
-	 * 	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
-	 *
-	 * 	{ u64			size;
-	 * 	  char			data[size];
-	 * 	  u64			dyn_size; } && PERF_SAMPLE_STACK_USER
-	 * };
-	 */
-	PERF_RECORD_SAMPLE			= 9,
-
-	PERF_RECORD_MAX,			/* non-ABI */
-};
-
-#define PERF_MAX_STACK_DEPTH		127
-
-enum perf_callchain_context {
-	PERF_CONTEXT_HV			= (__u64)-32,
-	PERF_CONTEXT_KERNEL		= (__u64)-128,
-	PERF_CONTEXT_USER		= (__u64)-512,
-
-	PERF_CONTEXT_GUEST		= (__u64)-2048,
-	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
-	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
-
-	PERF_CONTEXT_MAX		= (__u64)-4095,
-};
-
-#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
-#define PERF_FLAG_FD_OUTPUT		(1U << 1)
-#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
-
-#ifdef __KERNEL__
 /*
  * Kernel-internal data types and definitions:
  */
@@ -1422,5 +825,4 @@ _name##_show(struct device *dev,					\
 									\
 static struct device_attribute format_attr_##_name = __ATTR_RO(_name)
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_PERF_EVENT_H */
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 8fc7dd1a57ff29cb96722a01290f07de6dd1d23a..646c0a7d50faae5980038fba2e0a41fddfa6b4c1 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -1,7 +1,8 @@
 #ifndef _LINUX_PERSONALITY_H
 #define _LINUX_PERSONALITY_H
 
-#ifdef __KERNEL__
+#include <uapi/linux/personality.h>
+
 
 /*
  * Handling of different ABIs (personalities).
@@ -14,72 +15,6 @@ extern int		register_exec_domain(struct exec_domain *);
 extern int		unregister_exec_domain(struct exec_domain *);
 extern int		__set_personality(unsigned int);
 
-#endif /* __KERNEL__ */
-
-/*
- * Flags for bug emulation.
- *
- * These occupy the top three bytes.
- */
-enum {
-	UNAME26	=               0x0020000,
-	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
-	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
-						 * (signal handling)
-						 */
-	MMAP_PAGE_ZERO =	0x0100000,
-	ADDR_COMPAT_LAYOUT =	0x0200000,
-	READ_IMPLIES_EXEC =	0x0400000,
-	ADDR_LIMIT_32BIT =	0x0800000,
-	SHORT_INODE =		0x1000000,
-	WHOLE_SECONDS =		0x2000000,
-	STICKY_TIMEOUTS	=	0x4000000,
-	ADDR_LIMIT_3GB = 	0x8000000,
-};
-
-/*
- * Security-relevant compatibility flags that must be
- * cleared upon setuid or setgid exec:
- */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
-			    ADDR_NO_RANDOMIZE  | \
-			    ADDR_COMPAT_LAYOUT | \
-			    MMAP_PAGE_ZERO)
-
-/*
- * Personality types.
- *
- * These go in the low byte.  Avoid using the top bit, it will
- * conflict with error returns.
- */
-enum {
-	PER_LINUX =		0x0000,
-	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
-	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
-	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
-					 WHOLE_SECONDS | SHORT_INODE,
-	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
-	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
-	PER_BSD =		0x0006,
-	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
-	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_LINUX32 =		0x0008,
-	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
-	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
-	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
-	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
-	PER_RISCOS =		0x000c,
-	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
-	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
-	PER_HPUX =		0x0010,
-	PER_MASK =		0x00ff,
-};
-
-#ifdef __KERNEL__
 
 /*
  * Description of an execution domain.
@@ -116,6 +51,4 @@ struct exec_domain {
 #define set_personality(pers) \
 	((current->personality == (pers)) ? 0 : __set_personality(pers))
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_PERSONALITY_H */
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index f48bfc80cb4bfc7736173f6687550867ed0fc882..f691b04fc5cebec9e4f4254a81e9e4a3a0c06494 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -19,169 +19,11 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  * 02110-1301 USA
  */
-
 #ifndef LINUX_PHONET_H
 #define LINUX_PHONET_H
 
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Automatic protocol selection */
-#define PN_PROTO_TRANSPORT	0
-/* Phonet datagram socket */
-#define PN_PROTO_PHONET		1
-/* Phonet pipe */
-#define PN_PROTO_PIPE		2
-#define PHONET_NPROTO		3
-
-/* Socket options for SOL_PNPIPE level */
-#define PNPIPE_ENCAP		1
-#define PNPIPE_IFINDEX		2
-#define PNPIPE_HANDLE		3
-#define PNPIPE_INITSTATE	4
-
-#define PNADDR_ANY		0
-#define PNADDR_BROADCAST	0xFC
-#define PNPORT_RESOURCE_ROUTING	0
-
-/* Values for PNPIPE_ENCAP option */
-#define PNPIPE_ENCAP_NONE	0
-#define PNPIPE_ENCAP_IP		1
-
-/* ioctls */
-#define SIOCPNGETOBJECT		(SIOCPROTOPRIVATE + 0)
-#define SIOCPNENABLEPIPE	(SIOCPROTOPRIVATE + 13)
-#define SIOCPNADDRESOURCE	(SIOCPROTOPRIVATE + 14)
-#define SIOCPNDELRESOURCE	(SIOCPROTOPRIVATE + 15)
-
-/* Phonet protocol header */
-struct phonethdr {
-	__u8	pn_rdev;
-	__u8	pn_sdev;
-	__u8	pn_res;
-	__be16	pn_length;
-	__u8	pn_robj;
-	__u8	pn_sobj;
-} __attribute__((packed));
-
-/* Common Phonet payload header */
-struct phonetmsg {
-	__u8	pn_trans_id;	/* transaction ID */
-	__u8	pn_msg_id;	/* message type */
-	union {
-		struct {
-			__u8	pn_submsg_id;	/* message subtype */
-			__u8	pn_data[5];
-		} base;
-		struct {
-			__u16	pn_e_res_id;	/* extended resource ID */
-			__u8	pn_e_submsg_id;	/* message subtype */
-			__u8	pn_e_data[3];
-		} ext;
-	} pn_msg_u;
-};
-#define PN_COMMON_MESSAGE	0xF0
-#define PN_COMMGR		0x10
-#define PN_PREFIX		0xE0 /* resource for extended messages */
-#define pn_submsg_id		pn_msg_u.base.pn_submsg_id
-#define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
-#define pn_e_res_id		pn_msg_u.ext.pn_e_res_id
-#define pn_data			pn_msg_u.base.pn_data
-#define pn_e_data		pn_msg_u.ext.pn_e_data
-
-/* data for unreachable errors */
-#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP	0x01
-#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP	0x14
-#define pn_orig_msg_id		pn_data[0]
-#define pn_status		pn_data[1]
-#define pn_e_orig_msg_id	pn_e_data[0]
-#define pn_e_status		pn_e_data[1]
-
-/* Phonet socket address structure */
-struct sockaddr_pn {
-	__kernel_sa_family_t spn_family;
-	__u8 spn_obj;
-	__u8 spn_dev;
-	__u8 spn_resource;
-	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
-} __attribute__((packed));
-
-/* Well known address */
-#define PN_DEV_PC	0x10
-
-static inline __u16 pn_object(__u8 addr, __u16 port)
-{
-	return (addr << 8) | (port & 0x3ff);
-}
+#include <uapi/linux/phonet.h>
 
-static inline __u8 pn_obj(__u16 handle)
-{
-	return handle & 0xff;
-}
-
-static inline __u8 pn_dev(__u16 handle)
-{
-	return handle >> 8;
-}
-
-static inline __u16 pn_port(__u16 handle)
-{
-	return handle & 0x3ff;
-}
-
-static inline __u8 pn_addr(__u16 handle)
-{
-	return (handle >> 8) & 0xfc;
-}
-
-static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
-{
-	spn->spn_dev &= 0x03;
-	spn->spn_dev |= addr & 0xfc;
-}
-
-static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
-{
-	spn->spn_dev &= 0xfc;
-	spn->spn_dev |= (port >> 8) & 0x03;
-	spn->spn_obj = port & 0xff;
-}
-
-static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
-						__u16 handle)
-{
-	spn->spn_dev = pn_dev(handle);
-	spn->spn_obj = pn_obj(handle);
-}
-
-static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
-						__u8 resource)
-{
-	spn->spn_resource = resource;
-}
-
-static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
-{
-	return spn->spn_dev & 0xfc;
-}
-
-static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
-{
-	return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
-}
-
-static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
-{
-	return pn_object(spn->spn_dev, spn->spn_obj);
-}
-
-static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
-{
-	return spn->spn_resource;
-}
-
-/* Phonet device ioctl requests */
-#ifdef __KERNEL__
 #define SIOCPNGAUTOCONF		(SIOCDEVPRIVATE + 0)
 
 struct if_phonet_autoconf {
@@ -195,6 +37,4 @@ struct if_phonet_req {
 	} ifr_ifru;
 };
 #define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 721301b0a9087c27a22a48e49e16b795fc975073..93d142ad152815c7aafefa00ddd6cf2e1ab77a31 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -12,108 +12,13 @@
 #ifndef __PKTCDVD_H
 #define __PKTCDVD_H
 
-#include <linux/types.h>
-
-/*
- * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
- */
-#define PACKET_DEBUG		1
-
-#define	MAX_WRITERS		8
-
-#define PKT_RB_POOL_SIZE	512
-
-/*
- * How long we should hold a non-full packet before starting data gathering.
- */
-#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
-
-/*
- * use drive write caching -- we need deferred error handling to be
- * able to successfully recover with this option (drive will return good
- * status as soon as the cdb is validated).
- */
-#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
-#define USE_WCACHING		1
-#else
-#define USE_WCACHING		0
-#endif
-
-/*
- * No user-servicable parts beyond this point ->
- */
-
-/*
- * device types
- */
-#define PACKET_CDR		1
-#define	PACKET_CDRW		2
-#define PACKET_DVDR		3
-#define PACKET_DVDRW		4
-
-/*
- * flags
- */
-#define PACKET_WRITABLE		1	/* pd is writable */
-#define PACKET_NWA_VALID	2	/* next writable address valid */
-#define PACKET_LRA_VALID	3	/* last recorded address valid */
-#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
-					/* underlying cdrom device happy */
-
-/*
- * Disc status -- from READ_DISC_INFO
- */
-#define PACKET_DISC_EMPTY	0
-#define PACKET_DISC_INCOMPLETE	1
-#define PACKET_DISC_COMPLETE	2
-#define PACKET_DISC_OTHER	3
-
-/*
- * write type, and corresponding data block type
- */
-#define PACKET_MODE1		1
-#define PACKET_MODE2		2
-#define PACKET_BLOCK_MODE1	8
-#define PACKET_BLOCK_MODE2	10
-
-/*
- * Last session/border status
- */
-#define PACKET_SESSION_EMPTY		0
-#define PACKET_SESSION_INCOMPLETE	1
-#define PACKET_SESSION_RESERVED		2
-#define PACKET_SESSION_COMPLETE		3
-
-#define PACKET_MCN			"4a656e734178626f65323030300000"
-
-#undef PACKET_USE_LS
-
-#define PKT_CTRL_CMD_SETUP	0
-#define PKT_CTRL_CMD_TEARDOWN	1
-#define PKT_CTRL_CMD_STATUS	2
-
-struct pkt_ctrl_command {
-	__u32 command;				/* in: Setup, teardown, status */
-	__u32 dev_index;			/* in/out: Device index */
-	__u32 dev;				/* in/out: Device nr for cdrw device */
-	__u32 pkt_dev;				/* in/out: Device nr for packet device */
-	__u32 num_devices;			/* out: Largest device index + 1 */
-	__u32 padding;				/* Not used */
-};
-
-/*
- * packet ioctls
- */
-#define PACKET_IOCTL_MAGIC	('X')
-#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
-
-#ifdef __KERNEL__
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/cdrom.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
 #include <linux/mempool.h>
+#include <uapi/linux/pktcdvd.h>
 
 /* default bio write queue congestion marks */
 #define PKT_WRITE_CONGESTION_ON    10000
@@ -297,6 +202,4 @@ struct pktcdvd_device
 	struct dentry		*dfs_f_info;	/* debugfs: info file */
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* __PKTCDVD_H */
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 84e6a55a1202d2d9b4db2e3dbb1f448ef78aab54..99b400b8a2412b558e9c79b508bf62d384d458b2 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -5,137 +5,11 @@
  *
  * Copyright (C) 1998 Paul Mackerras.
  */
-
 #ifndef _LINUX_PMU_H
 #define _LINUX_PMU_H
 
-#define PMU_DRIVER_VERSION	2
-
-/*
- * PMU commands
- */
-#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
-#define PMU_POWER_CTRL		0x11	/* control power of some devices */
-#define PMU_ADB_CMD		0x20	/* send ADB packet */
-#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
-#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
-#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
-#define PMU_SET_RTC		0x30	/* set real-time clock */
-#define PMU_READ_RTC		0x38	/* read real-time clock */
-#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
-#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
-#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
-#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
-#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
-#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
-#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
-#define PMU_INT_ACK		0x78	/* read interrupt bits */
-#define PMU_SHUTDOWN		0x7e	/* turn power off */
-#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
-#define PMU_SLEEP		0x7f	/* put CPU to sleep */
-#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
-#define PMU_I2C_CMD		0x9a	/* I2C operations */
-#define PMU_RESET		0xd0	/* reset CPU */
-#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
-#define PMU_GET_COVER		0xdc	/* report cover open/closed */
-#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
-#define PMU_GET_VERSION		0xea	/* read the PMU version */
-
-/* Bits to use with the PMU_POWER_CTRL0 command */
-#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
-#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
-#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
-
-/* Bits to use with the PMU_POWER_CTRL command */
-#define PMU_POW_ON		0x80	/* OR this to power ON the device */
-#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
-#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
-#define PMU_POW_CHARGER		0x02	/* battery charger power */
-#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
-#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
-
-/* Bits in PMU interrupt and interrupt mask bytes */
-#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
-#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
-#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
-#define PMU_INT_BATTERY		0x20	/* Battery state change */
-#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
-#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
-
-/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
-#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
-#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
-#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
-
-/* Bits in the environement message (either obtained via PMU_GET_COVER,
- * or via PMU_INT_ENVIRONMENT on core99 */
-#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
-
-/* I2C related definitions */
-#define PMU_I2C_MODE_SIMPLE	0
-#define PMU_I2C_MODE_STDSUB	1
-#define PMU_I2C_MODE_COMBINED	2
-
-#define PMU_I2C_BUS_STATUS	0
-#define PMU_I2C_BUS_SYSCLK	1
-#define PMU_I2C_BUS_POWER	2
-
-#define PMU_I2C_STATUS_OK	0
-#define PMU_I2C_STATUS_DATAREAD	1
-#define PMU_I2C_STATUS_BUSY	0xfe
-
-
-/* Kind of PMU (model) */
-enum {
-	PMU_UNKNOWN,
-	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
-	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
-	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
-	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
-	PMU_68K_V1,		/* 68K PMU, version 1 */
-	PMU_68K_V2, 		/* 68K PMU, version 2 */
-};
+#include <uapi/linux/pmu.h>
 
-/* PMU PMU_POWER_EVENTS commands */
-enum {
-	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
-	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
-	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
-	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
-	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
-	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
-};
-
-/* Power events wakeup bits */
-enum {
-	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
-	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
-	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
-	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
-	PMU_PWR_WAKEUP_RING		= 0x10,
-};
-	
-/*
- * Ioctl commands for the /dev/pmu device
- */
-#include <linux/ioctl.h>
-
-/* no param */
-#define PMU_IOC_SLEEP		_IO('B', 0)
-/* out param: u32*	backlight value: 0 to 15 */
-#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
-/* in param: u32	backlight value: 0 to 15 */
-#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
-/* out param: u32*	PMU model */
-#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
-/* out param: u32*	has_adb: 0 or 1 */
-#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
-/* out param: u32*	can_sleep: 0 or 1 */
-#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
-/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
-#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
-
-#ifdef __KERNEL__
 
 extern int find_via_pmu(void);
 
@@ -208,6 +82,4 @@ extern int pmu_sys_suspended;
 #define pmu_sys_suspended	0
 #endif
 
-#endif	/* __KERNEL__ */
-
 #endif /* _LINUX_PMU_H */
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 48fe8bc398d1a388c55ee7b99041ff5a84b25ea3..c08386fb3e0845933f074bda2117734c128075b3 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -1,9 +1,6 @@
 #ifndef _LINUX_POLL_H
 #define _LINUX_POLL_H
 
-#include <asm/poll.h>
-
-#ifdef __KERNEL__
 
 #include <linux/compiler.h>
 #include <linux/ktime.h>
@@ -12,6 +9,7 @@
 #include <linux/fs.h>
 #include <linux/sysctl.h>
 #include <asm/uaccess.h>
+#include <uapi/linux/poll.h>
 
 extern struct ctl_table epoll_table[]; /* for sysctl */
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
@@ -163,6 +161,4 @@ extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 
 extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
 
-#endif /* KERNEL */
-
 #endif /* _LINUX_POLL_H */
diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
index e53ff65935ddf9d5e9737005cea66a39c477d923..4ea1d377e1ad9d567ab22bd277652724742798d1 100644
--- a/include/linux/ppp-comp.h
+++ b/include/linux/ppp-comp.h
@@ -10,6 +10,9 @@
 #ifndef _NET_PPP_COMP_H
 #define _NET_PPP_COMP_H
 
+#include <uapi/linux/ppp-comp.h>
+
+
 struct module;
 
 /*
@@ -98,87 +101,6 @@ struct compressor {
 #define DECOMP_ERROR		-1	/* error detected before decomp. */
 #define DECOMP_FATALERROR	-2	/* error detected after decomp. */
 
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	9
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for MPPE.
- */
-
-#define CI_MPPE                18      /* config option for MPPE */
-#define CILEN_MPPE              6      /* length of config option */
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#ifdef __KERNEL__
 extern int ppp_register_compressor(struct compressor *);
 extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
 #endif /* _NET_PPP_COMP_H */
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
index ba416f67eb621d3c74be22f426d49f3ddd8f173e..28aa0237c8c36ee669c52c5e0135c709aa24616e 100644
--- a/include/linux/ppp_defs.h
+++ b/include/linux/ppp_defs.h
@@ -7,148 +7,11 @@
  *  modify it under the terms of the GNU General Public License
  *  version 2 as published by the Free Software Foundation.
  */
-#include <linux/types.h>
-
 #ifndef _PPP_DEFS_H_
 #define _PPP_DEFS_H_
 
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
-#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX protocol */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_MP		0x3d	/* Multilink protocol */
-#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
-#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
-#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-
-#ifdef __KERNEL__
 #include <linux/crc-ccitt.h>
-#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32		ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat	{
-    __u32	ppp_discards;	/* # frames discarded */
-
-    __u32	ppp_ibytes;	/* bytes received */
-    __u32	ppp_ioctects;	/* bytes received not in error */
-    __u32	ppp_ipackets;	/* packets received */
-    __u32	ppp_ierrors;	/* receive errors */
-    __u32	ppp_ilqrs;	/* # LQR frames received */
-
-    __u32	ppp_obytes;	/* raw bytes sent */
-    __u32	ppp_ooctects;	/* frame bytes sent */
-    __u32	ppp_opackets;	/* packets sent */
-    __u32	ppp_oerrors;	/* transmit errors */ 
-    __u32	ppp_olqrs;	/* # LQR frames sent */
-};
-
-struct vjstat {
-    __u32	vjs_packets;	/* outbound packets */
-    __u32	vjs_compressed;	/* outbound compressed packets */
-    __u32	vjs_searches;	/* searches for connection state */
-    __u32	vjs_misses;	/* times couldn't find conn. state */
-    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
-    __u32	vjs_compressedin;   /* inbound compressed packets */
-    __u32	vjs_errorin;	/* inbound unknown type packets */
-    __u32	vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct compstat {
-    __u32	unc_bytes;	/* total uncompressed bytes */
-    __u32	unc_packets;	/* total uncompressed packets */
-    __u32	comp_bytes;	/* compressed bytes */
-    __u32	comp_packets;	/* compressed packets */
-    __u32	inc_bytes;	/* incompressible bytes */
-    __u32	inc_packets;	/* incompressible packets */
-
-    /* the compression ratio is defined as in_count / bytes_out */
-    __u32       in_count;	/* Bytes received */
-    __u32       bytes_out;	/* Bytes transmitted */
-
-    double	ratio;		/* not computed in kernel. */
-};
-
-struct ppp_stats {
-    struct pppstat	p;	/* basic PPP statistics */
-    struct vjstat	vj;	/* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
-    struct compstat	c;	/* packet compression statistics */
-    struct compstat	d;	/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    __kernel_time_t xmit_idle;	/* time since last NP packet sent */
-    __kernel_time_t recv_idle;	/* time since last NP packet received */
-};
+#include <uapi/linux/ppp_defs.h>
 
+#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
 #endif /* _PPP_DEFS_H_ */
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 1d24ffad59c53c27a66bf7b4cced639f0a5f000a..e0ff4689d35a6bb6a72b17b3f6cc055066d3ca41 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -1,82 +1,12 @@
 #ifndef _LINUX_PTRACE_H
 #define _LINUX_PTRACE_H
-/* ptrace.h */
-/* structs and defines to help the user use the ptrace system call. */
 
-/* has the defines to get at the registers. */
-
-#define PTRACE_TRACEME		   0
-#define PTRACE_PEEKTEXT		   1
-#define PTRACE_PEEKDATA		   2
-#define PTRACE_PEEKUSR		   3
-#define PTRACE_POKETEXT		   4
-#define PTRACE_POKEDATA		   5
-#define PTRACE_POKEUSR		   6
-#define PTRACE_CONT		   7
-#define PTRACE_KILL		   8
-#define PTRACE_SINGLESTEP	   9
-
-#define PTRACE_ATTACH		  16
-#define PTRACE_DETACH		  17
-
-#define PTRACE_SYSCALL		  24
-
-/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
-#define PTRACE_SETOPTIONS	0x4200
-#define PTRACE_GETEVENTMSG	0x4201
-#define PTRACE_GETSIGINFO	0x4202
-#define PTRACE_SETSIGINFO	0x4203
+#include <linux/compiler.h>		/* For unlikely.  */
+#include <linux/sched.h>		/* For struct task_struct.  */
+#include <linux/err.h>			/* for IS_ERR_VALUE */
+#include <linux/bug.h>			/* For BUG_ON.  */
+#include <uapi/linux/ptrace.h>
 
-/*
- * Generic ptrace interface that exports the architecture specific regsets
- * using the corresponding NT_* types (which are also used in the core dump).
- * Please note that the NT_PRSTATUS note type in a core dump contains a full
- * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
- * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
- * other user_regset flavors, the user_regset layout and the ELF core dump note
- * payload are exactly the same layout.
- *
- * This interface usage is as follows:
- *	struct iovec iov = { buf, len};
- *
- *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
- *
- * On the successful completion, iov.len will be updated by the kernel,
- * specifying how much the kernel has written/read to/from the user's iov.buf.
- */
-#define PTRACE_GETREGSET	0x4204
-#define PTRACE_SETREGSET	0x4205
-
-#define PTRACE_SEIZE		0x4206
-#define PTRACE_INTERRUPT	0x4207
-#define PTRACE_LISTEN		0x4208
-
-/* Wait extended result codes for the above trace options.  */
-#define PTRACE_EVENT_FORK	1
-#define PTRACE_EVENT_VFORK	2
-#define PTRACE_EVENT_CLONE	3
-#define PTRACE_EVENT_EXEC	4
-#define PTRACE_EVENT_VFORK_DONE	5
-#define PTRACE_EVENT_EXIT	6
-#define PTRACE_EVENT_SECCOMP	7
-/* Extended result codes which enabled by means other than options.  */
-#define PTRACE_EVENT_STOP	128
-
-/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
-#define PTRACE_O_TRACESYSGOOD	1
-#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
-#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
-#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
-#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
-#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
-#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
-#define PTRACE_O_TRACESECCOMP	(1 << PTRACE_EVENT_SECCOMP)
-
-#define PTRACE_O_MASK		0x000000ff
-
-#include <asm/ptrace.h>
-
-#ifdef __KERNEL__
 /*
  * Ptrace flags
  *
@@ -108,12 +38,6 @@
 #define PT_BLOCKSTEP_BIT	30
 #define PT_BLOCKSTEP		(1<<PT_BLOCKSTEP_BIT)
 
-#include <linux/compiler.h>		/* For unlikely.  */
-#include <linux/sched.h>		/* For struct task_struct.  */
-#include <linux/err.h>			/* for IS_ERR_VALUE */
-#include <linux/bug.h>			/* For BUG_ON.  */
-
-
 extern long arch_ptrace(struct task_struct *child, long request,
 			unsigned long addr, unsigned long data);
 extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
@@ -416,6 +340,4 @@ extern void ptrace_put_breakpoints(struct task_struct *tsk);
 static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
-#endif /* __KERNEL */
-
 #endif
diff --git a/include/linux/quota.h b/include/linux/quota.h
index dcd5721e626dbdba0e6e7221979fa4033d482b19..58fdef1252521cff27e6a05bee70fcf3e6eb8923 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -29,146 +29,9 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  */
-
 #ifndef _LINUX_QUOTA_
 #define _LINUX_QUOTA_
 
-#include <linux/errno.h>
-#include <linux/types.h>
-
-#define __DQUOT_VERSION__	"dquot_6.5.2"
-
-#define MAXQUOTAS 2
-#define USRQUOTA  0		/* element used for user quotas */
-#define GRPQUOTA  1		/* element used for group quotas */
-
-/*
- * Definitions for the default names of the quotas files.
- */
-#define INITQFNAMES { \
-	"user",    /* USRQUOTA */ \
-	"group",   /* GRPQUOTA */ \
-	"undefined", \
-};
-
-/*
- * Command definitions for the 'quotactl' system call.
- * The commands are broken into a main command defined below
- * and a subcommand that is used to convey the type of
- * quota that is being manipulated (see above).
- */
-#define SUBCMDMASK  0x00ff
-#define SUBCMDSHIFT 8
-#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
-
-#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
-#define Q_QUOTAON  0x800002	/* turn quotas on */
-#define Q_QUOTAOFF 0x800003	/* turn quotas off */
-#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
-#define Q_GETINFO  0x800005	/* get information about quota files */
-#define Q_SETINFO  0x800006	/* set information about quota files */
-#define Q_GETQUOTA 0x800007	/* get user quota structure */
-#define Q_SETQUOTA 0x800008	/* set user quota structure */
-
-/* Quota format type IDs */
-#define	QFMT_VFS_OLD 1
-#define	QFMT_VFS_V0 2
-#define QFMT_OCFS2 3
-#define	QFMT_VFS_V1 4
-
-/* Size of block in which space limits are passed through the quota
- * interface */
-#define QIF_DQBLKSIZE_BITS 10
-#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
-
-/*
- * Quota structure used for communication with userspace via quotactl
- * Following flags are used to specify which fields are valid
- */
-enum {
-	QIF_BLIMITS_B = 0,
-	QIF_SPACE_B,
-	QIF_ILIMITS_B,
-	QIF_INODES_B,
-	QIF_BTIME_B,
-	QIF_ITIME_B,
-};
-
-#define QIF_BLIMITS	(1 << QIF_BLIMITS_B)
-#define QIF_SPACE	(1 << QIF_SPACE_B)
-#define QIF_ILIMITS	(1 << QIF_ILIMITS_B)
-#define QIF_INODES	(1 << QIF_INODES_B)
-#define QIF_BTIME	(1 << QIF_BTIME_B)
-#define QIF_ITIME	(1 << QIF_ITIME_B)
-#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
-#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
-#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
-#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
-
-struct if_dqblk {
-	__u64 dqb_bhardlimit;
-	__u64 dqb_bsoftlimit;
-	__u64 dqb_curspace;
-	__u64 dqb_ihardlimit;
-	__u64 dqb_isoftlimit;
-	__u64 dqb_curinodes;
-	__u64 dqb_btime;
-	__u64 dqb_itime;
-	__u32 dqb_valid;
-};
-
-/*
- * Structure used for setting quota information about file via quotactl
- * Following flags are used to specify which fields are valid
- */
-#define IIF_BGRACE	1
-#define IIF_IGRACE	2
-#define IIF_FLAGS	4
-#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
-
-struct if_dqinfo {
-	__u64 dqi_bgrace;
-	__u64 dqi_igrace;
-	__u32 dqi_flags;
-	__u32 dqi_valid;
-};
-
-/*
- * Definitions for quota netlink interface
- */
-#define QUOTA_NL_NOWARN 0
-#define QUOTA_NL_IHARDWARN 1		/* Inode hardlimit reached */
-#define QUOTA_NL_ISOFTLONGWARN 2 	/* Inode grace time expired */
-#define QUOTA_NL_ISOFTWARN 3		/* Inode softlimit reached */
-#define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
-#define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
-#define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
-#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
-#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
-#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
-#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
-
-enum {
-	QUOTA_NL_C_UNSPEC,
-	QUOTA_NL_C_WARNING,
-	__QUOTA_NL_C_MAX,
-};
-#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
-
-enum {
-	QUOTA_NL_A_UNSPEC,
-	QUOTA_NL_A_QTYPE,
-	QUOTA_NL_A_EXCESS_ID,
-	QUOTA_NL_A_WARNING,
-	QUOTA_NL_A_DEV_MAJOR,
-	QUOTA_NL_A_DEV_MINOR,
-	QUOTA_NL_A_CAUSED_ID,
-	__QUOTA_NL_A_MAX,
-};
-#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
-
-
-#ifdef __KERNEL__
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/rwsem.h>
@@ -183,6 +46,7 @@ enum {
 #include <linux/atomic.h>
 #include <linux/uidgid.h>
 #include <linux/projid.h>
+#include <uapi/linux/quota.h>
 
 #undef USRQUOTA
 #undef GRPQUOTA
@@ -543,5 +407,4 @@ struct quota_module_name {
 	{QFMT_VFS_V0, "quota_v2"},\
 	{0, NULL}}
 
-#endif /* __KERNEL__ */
 #endif /* _QUOTA_ */
diff --git a/include/linux/random.h b/include/linux/random.h
index ac621ce886ca13a600a879c0132ef2650113aa15..6330ed47b38b12ab230e4cb03949a75703cf1317 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -3,50 +3,11 @@
  *
  * Include file for the random number generator.
  */
-
 #ifndef _LINUX_RANDOM_H
 #define _LINUX_RANDOM_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/irqnr.h>
-
-/* ioctl()'s for the random number generator */
-
-/* Get the entropy count. */
-#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
-
-/* Add to (or subtract from) the entropy count.  (Superuser only.) */
-#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
-
-/* Get the contents of the entropy pool.  (Superuser only.) */
-#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
-
-/* 
- * Write bytes into the entropy pool and add to the entropy count.
- * (Superuser only.)
- */
-#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
+#include <uapi/linux/random.h>
 
-/* Clear entropy count to 0.  (Superuser only.) */
-#define RNDZAPENTCNT	_IO( 'R', 0x04 )
-
-/* Clear the entropy pool and associated counters.  (Superuser only.) */
-#define RNDCLEARPOOL	_IO( 'R', 0x06 )
-
-struct rand_pool_info {
-	int	entropy_count;
-	int	buf_size;
-	__u32	buf[0];
-};
-
-struct rnd_state {
-	__u32 s1, s2, s3;
-};
-
-/* Exported functions */
-
-#ifdef __KERNEL__
 
 extern void add_device_randomness(const void *, unsigned int);
 extern void add_input_randomness(unsigned int type, unsigned int code,
@@ -104,6 +65,4 @@ static inline int arch_get_random_int(unsigned int *v)
 }
 #endif
 
-#endif /* __KERNEL___ */
-
 #endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index e0879a70e830e29847cc9ba9b9f4d6851d8e3c4d..23b36304cd881bb77bfb0ca092b0e4346b88d87d 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -1,43 +1,9 @@
 #ifndef _LINUX_REBOOT_H
 #define _LINUX_REBOOT_H
 
-/*
- * Magic values required to use _reboot() system call.
- */
-
-#define	LINUX_REBOOT_MAGIC1	0xfee1dead
-#define	LINUX_REBOOT_MAGIC2	672274793
-#define	LINUX_REBOOT_MAGIC2A	85072278
-#define	LINUX_REBOOT_MAGIC2B	369367448
-#define	LINUX_REBOOT_MAGIC2C	537993216
-
-
-/*
- * Commands accepted by the _reboot() system call.
- *
- * RESTART     Restart system using default command and mode.
- * HALT        Stop OS and give system control to ROM monitor, if any.
- * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
- * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
- * POWER_OFF   Stop OS and remove all power from system, if possible.
- * RESTART2    Restart system using given command string.
- * SW_SUSPEND  Suspend system using software suspend if compiled in.
- * KEXEC       Restart system using a previously loaded Linux kernel
- */
-
-#define	LINUX_REBOOT_CMD_RESTART	0x01234567
-#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
-#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
-#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
-#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
-#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
-#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
-#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
-
-
-#ifdef __KERNEL__
 
 #include <linux/notifier.h>
+#include <uapi/linux/reboot.h>
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
@@ -84,6 +50,4 @@ extern int orderly_poweroff(bool force);
 extern void emergency_restart(void);
 #include <asm/emergency-restart.h>
 
-#endif
-
 #endif /* _LINUX_REBOOT_H */
diff --git a/include/linux/resource.h b/include/linux/resource.h
index d01c96c1966e2724460eeaaef3bdd6c522fc7bda..5bc3116e649c80139fd34b591eea010b264dd5cd 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -1,82 +1,8 @@
 #ifndef _LINUX_RESOURCE_H
 #define _LINUX_RESOURCE_H
 
-#include <linux/time.h>
-#include <linux/types.h>
+#include <uapi/linux/resource.h>
 
-/*
- * Resource control/accounting header file for linux
- */
-
-/*
- * Definition of struct rusage taken from BSD 4.3 Reno
- * 
- * We don't support all of these yet, but we might as well have them....
- * Otherwise, each time we add new items, programs which depend on this
- * structure will lose.  This reduces the chances of that happening.
- */
-#define	RUSAGE_SELF	0
-#define	RUSAGE_CHILDREN	(-1)
-#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
-#define	RUSAGE_THREAD	1		/* only the calling thread */
-
-struct	rusage {
-	struct timeval ru_utime;	/* user time used */
-	struct timeval ru_stime;	/* system time used */
-	long	ru_maxrss;		/* maximum resident set size */
-	long	ru_ixrss;		/* integral shared memory size */
-	long	ru_idrss;		/* integral unshared data size */
-	long	ru_isrss;		/* integral unshared stack size */
-	long	ru_minflt;		/* page reclaims */
-	long	ru_majflt;		/* page faults */
-	long	ru_nswap;		/* swaps */
-	long	ru_inblock;		/* block input operations */
-	long	ru_oublock;		/* block output operations */
-	long	ru_msgsnd;		/* messages sent */
-	long	ru_msgrcv;		/* messages received */
-	long	ru_nsignals;		/* signals received */
-	long	ru_nvcsw;		/* voluntary context switches */
-	long	ru_nivcsw;		/* involuntary " */
-};
-
-struct rlimit {
-	unsigned long	rlim_cur;
-	unsigned long	rlim_max;
-};
-
-#define RLIM64_INFINITY		(~0ULL)
-
-struct rlimit64 {
-	__u64 rlim_cur;
-	__u64 rlim_max;
-};
-
-#define	PRIO_MIN	(-20)
-#define	PRIO_MAX	20
-
-#define	PRIO_PROCESS	0
-#define	PRIO_PGRP	1
-#define	PRIO_USER	2
-
-/*
- * Limit the stack by to some sane default: root can always
- * increase this limit if needed..  8MB seems reasonable.
- */
-#define _STK_LIM	(8*1024*1024)
-
-/*
- * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
- * and other sensitive information are never written to disk.
- */
-#define MLOCK_LIMIT	((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
-
-/*
- * Due to binary compatibility, the actual resource numbers
- * may be different for different linux versions..
- */
-#include <asm/resource.h>
-
-#ifdef __KERNEL__
 
 struct task_struct;
 
@@ -84,6 +10,4 @@ int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
 int do_prlimit(struct task_struct *tsk, unsigned int resource,
 		struct rlimit *new_rlim, struct rlimit *old_rlim);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 0ec590bb361119ea10825c211f376d902ad294be..d9010789b4e8215cc74a2ffc12e83f3cfd9b73cd 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -1,6 +1,3 @@
-#ifndef __RFKILL_H
-#define __RFKILL_H
-
 /*
  * Copyright (C) 2006 - 2007 Ivo van Doorn
  * Copyright (C) 2007 Dmitry Torokhov
@@ -18,92 +15,11 @@
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+#ifndef __RFKILL_H
+#define __RFKILL_H
 
-#include <linux/types.h>
-
-/* define userspace visible states */
-#define RFKILL_STATE_SOFT_BLOCKED	0
-#define RFKILL_STATE_UNBLOCKED		1
-#define RFKILL_STATE_HARD_BLOCKED	2
-
-/**
- * enum rfkill_type - type of rfkill switch.
- *
- * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
- * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
- * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
- * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
- * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
- * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
- * @RFKILL_TYPE_GPS: switch is on a GPS device.
- * @RFKILL_TYPE_FM: switch is on a FM radio device.
- * @NUM_RFKILL_TYPES: number of defined rfkill types
- */
-enum rfkill_type {
-	RFKILL_TYPE_ALL = 0,
-	RFKILL_TYPE_WLAN,
-	RFKILL_TYPE_BLUETOOTH,
-	RFKILL_TYPE_UWB,
-	RFKILL_TYPE_WIMAX,
-	RFKILL_TYPE_WWAN,
-	RFKILL_TYPE_GPS,
-	RFKILL_TYPE_FM,
-	NUM_RFKILL_TYPES,
-};
-
-/**
- * enum rfkill_operation - operation types
- * @RFKILL_OP_ADD: a device was added
- * @RFKILL_OP_DEL: a device was removed
- * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
- * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
- */
-enum rfkill_operation {
-	RFKILL_OP_ADD = 0,
-	RFKILL_OP_DEL,
-	RFKILL_OP_CHANGE,
-	RFKILL_OP_CHANGE_ALL,
-};
-
-/**
- * struct rfkill_event - events for userspace on /dev/rfkill
- * @idx: index of dev rfkill
- * @type: type of the rfkill struct
- * @op: operation code
- * @hard: hard state (0/1)
- * @soft: soft state (0/1)
- *
- * Structure used for userspace communication on /dev/rfkill,
- * used for events from the kernel and control to the kernel.
- */
-struct rfkill_event {
-	__u32 idx;
-	__u8  type;
-	__u8  op;
-	__u8  soft, hard;
-} __attribute__((packed));
-
-/*
- * We are planning to be backward and forward compatible with changes
- * to the event struct, by adding new, optional, members at the end.
- * When reading an event (whether the kernel from userspace or vice
- * versa) we need to accept anything that's at least as large as the
- * version 1 event size, but might be able to accept other sizes in
- * the future.
- *
- * One exception is the kernel -- we already have two event sizes in
- * that we've made the 'hard' member optional since our only option
- * is to ignore it anyway.
- */
-#define RFKILL_EVENT_SIZE_V1	8
-
-/* ioctl for turning off rfkill-input (if present) */
-#define RFKILL_IOC_MAGIC	'R'
-#define RFKILL_IOC_NOINPUT	1
-#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+#include <uapi/linux/rfkill.h>
 
-/* and that's all userspace gets */
-#ifdef __KERNEL__
 /* don't allow anyone to use these in the kernel */
 enum rfkill_user_states {
 	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
@@ -385,6 +301,4 @@ rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* RFKILL_H */
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 20ec4d3bed733d3818f4bb7f899b0322b253372e..9531845c419f8329000b8927a341057bb2a64e6d 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -11,102 +11,10 @@
 #ifndef _LINUX_RTC_H_
 #define _LINUX_RTC_H_
 
-/*
- * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel
- * source is self contained, allowing cross-compiles, etc. etc.
- */
-
-struct rtc_time {
-	int tm_sec;
-	int tm_min;
-	int tm_hour;
-	int tm_mday;
-	int tm_mon;
-	int tm_year;
-	int tm_wday;
-	int tm_yday;
-	int tm_isdst;
-};
-
-/*
- * This data structure is inspired by the EFI (v0.92) wakeup
- * alarm API.
- */
-struct rtc_wkalrm {
-	unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
-	unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
-	struct rtc_time time;	/* time the alarm is set to */
-};
-
-/*
- * Data structure to control PLL correction some better RTC feature
- * pll_value is used to get or set current value of correction,
- * the rest of the struct is used to query HW capabilities.
- * This is modeled after the RTC used in Q40/Q60 computers but
- * should be sufficiently flexible for other devices
- *
- * +ve pll_value means clock will run faster by
- *   pll_value*pll_posmult/pll_clock
- * -ve pll_value means clock will run slower by
- *   pll_value*pll_negmult/pll_clock
- */
-
-struct rtc_pll_info {
-	int pll_ctrl;       /* placeholder for fancier control */
-	int pll_value;      /* get/set correction value */
-	int pll_max;        /* max +ve (faster) adjustment value */
-	int pll_min;        /* max -ve (slower) adjustment value */
-	int pll_posmult;    /* factor for +ve correction */
-	int pll_negmult;    /* factor for -ve correction */
-	long pll_clock;     /* base PLL frequency */
-};
-
-/*
- * ioctl calls that are permitted to the /dev/rtc interface, if
- * any of the RTC drivers are enabled.
- */
-
-#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
-#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
-#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
-#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
-#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
-#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
-#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
-#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
-
-#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
-#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
-#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
-#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
-#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
-#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
-#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
-#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
-
-#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
-#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
-
-#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
-#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
-
-#define RTC_VL_READ	_IOR('p', 0x13, int)	/* Voltage low detector */
-#define RTC_VL_CLR	_IO('p', 0x14)		/* Clear voltage low information */
-
-/* interrupt flags */
-#define RTC_IRQF 0x80	/* Any of the following is active */
-#define RTC_PF 0x40	/* Periodic interrupt */
-#define RTC_AF 0x20	/* Alarm interrupt */
-#define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
-
-
-#define RTC_MAX_FREQ	8192
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/interrupt.h>
+#include <uapi/linux/rtc.h>
 
 extern int rtc_month_days(unsigned int month, unsigned int year);
 extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year);
@@ -282,6 +190,4 @@ extern int rtc_hctosys_ret;
 #define rtc_hctosys_ret -ENODEV
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index db71c4ad862436ac3bbb04677265bb92024dba7a..7002bbfd5d4a55e76041e146cd268a9d027ed6ed 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -1,616 +1,10 @@
 #ifndef __LINUX_RTNETLINK_H
 #define __LINUX_RTNETLINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
-#include <linux/if_link.h>
-#include <linux/if_addr.h>
-#include <linux/neighbour.h>
-
-/* rtnetlink families. Values up to 127 are reserved for real address
- * families, values above 128 may be used arbitrarily.
- */
-#define RTNL_FAMILY_IPMR		128
-#define RTNL_FAMILY_IP6MR		129
-#define RTNL_FAMILY_MAX			129
-
-/****
- *		Routing/neighbour discovery messages.
- ****/
-
-/* Types of messages */
-
-enum {
-	RTM_BASE	= 16,
-#define RTM_BASE	RTM_BASE
-
-	RTM_NEWLINK	= 16,
-#define RTM_NEWLINK	RTM_NEWLINK
-	RTM_DELLINK,
-#define RTM_DELLINK	RTM_DELLINK
-	RTM_GETLINK,
-#define RTM_GETLINK	RTM_GETLINK
-	RTM_SETLINK,
-#define RTM_SETLINK	RTM_SETLINK
-
-	RTM_NEWADDR	= 20,
-#define RTM_NEWADDR	RTM_NEWADDR
-	RTM_DELADDR,
-#define RTM_DELADDR	RTM_DELADDR
-	RTM_GETADDR,
-#define RTM_GETADDR	RTM_GETADDR
-
-	RTM_NEWROUTE	= 24,
-#define RTM_NEWROUTE	RTM_NEWROUTE
-	RTM_DELROUTE,
-#define RTM_DELROUTE	RTM_DELROUTE
-	RTM_GETROUTE,
-#define RTM_GETROUTE	RTM_GETROUTE
-
-	RTM_NEWNEIGH	= 28,
-#define RTM_NEWNEIGH	RTM_NEWNEIGH
-	RTM_DELNEIGH,
-#define RTM_DELNEIGH	RTM_DELNEIGH
-	RTM_GETNEIGH,
-#define RTM_GETNEIGH	RTM_GETNEIGH
-
-	RTM_NEWRULE	= 32,
-#define RTM_NEWRULE	RTM_NEWRULE
-	RTM_DELRULE,
-#define RTM_DELRULE	RTM_DELRULE
-	RTM_GETRULE,
-#define RTM_GETRULE	RTM_GETRULE
-
-	RTM_NEWQDISC	= 36,
-#define RTM_NEWQDISC	RTM_NEWQDISC
-	RTM_DELQDISC,
-#define RTM_DELQDISC	RTM_DELQDISC
-	RTM_GETQDISC,
-#define RTM_GETQDISC	RTM_GETQDISC
-
-	RTM_NEWTCLASS	= 40,
-#define RTM_NEWTCLASS	RTM_NEWTCLASS
-	RTM_DELTCLASS,
-#define RTM_DELTCLASS	RTM_DELTCLASS
-	RTM_GETTCLASS,
-#define RTM_GETTCLASS	RTM_GETTCLASS
-
-	RTM_NEWTFILTER	= 44,
-#define RTM_NEWTFILTER	RTM_NEWTFILTER
-	RTM_DELTFILTER,
-#define RTM_DELTFILTER	RTM_DELTFILTER
-	RTM_GETTFILTER,
-#define RTM_GETTFILTER	RTM_GETTFILTER
-
-	RTM_NEWACTION	= 48,
-#define RTM_NEWACTION   RTM_NEWACTION
-	RTM_DELACTION,
-#define RTM_DELACTION   RTM_DELACTION
-	RTM_GETACTION,
-#define RTM_GETACTION   RTM_GETACTION
-
-	RTM_NEWPREFIX	= 52,
-#define RTM_NEWPREFIX	RTM_NEWPREFIX
-
-	RTM_GETMULTICAST = 58,
-#define RTM_GETMULTICAST RTM_GETMULTICAST
-
-	RTM_GETANYCAST	= 62,
-#define RTM_GETANYCAST	RTM_GETANYCAST
-
-	RTM_NEWNEIGHTBL	= 64,
-#define RTM_NEWNEIGHTBL	RTM_NEWNEIGHTBL
-	RTM_GETNEIGHTBL	= 66,
-#define RTM_GETNEIGHTBL	RTM_GETNEIGHTBL
-	RTM_SETNEIGHTBL,
-#define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
-
-	RTM_NEWNDUSEROPT = 68,
-#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
-
-	RTM_NEWADDRLABEL = 72,
-#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
-	RTM_DELADDRLABEL,
-#define RTM_DELADDRLABEL RTM_DELADDRLABEL
-	RTM_GETADDRLABEL,
-#define RTM_GETADDRLABEL RTM_GETADDRLABEL
-
-	RTM_GETDCB = 78,
-#define RTM_GETDCB RTM_GETDCB
-	RTM_SETDCB,
-#define RTM_SETDCB RTM_SETDCB
-
-	__RTM_MAX,
-#define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
-};
-
-#define RTM_NR_MSGTYPES	(RTM_MAX + 1 - RTM_BASE)
-#define RTM_NR_FAMILIES	(RTM_NR_MSGTYPES >> 2)
-#define RTM_FAM(cmd)	(((cmd) - RTM_BASE) >> 2)
-
-/* 
-   Generic structure for encapsulation of optional route information.
-   It is reminiscent of sockaddr, but with sa_family replaced
-   with attribute type.
- */
-
-struct rtattr {
-	unsigned short	rta_len;
-	unsigned short	rta_type;
-};
-
-/* Macros to handle rtattributes */
-
-#define RTA_ALIGNTO	4
-#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
-#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
-			 (rta)->rta_len >= sizeof(struct rtattr) && \
-			 (rta)->rta_len <= (len))
-#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
-				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
-#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
-#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
-#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
-#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
-
-
-
-
-/******************************************************************************
- *		Definitions used in routing table administration.
- ****/
-
-struct rtmsg {
-	unsigned char		rtm_family;
-	unsigned char		rtm_dst_len;
-	unsigned char		rtm_src_len;
-	unsigned char		rtm_tos;
-
-	unsigned char		rtm_table;	/* Routing table id */
-	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
-	unsigned char		rtm_scope;	/* See below */	
-	unsigned char		rtm_type;	/* See below	*/
-
-	unsigned		rtm_flags;
-};
-
-/* rtm_type */
-
-enum {
-	RTN_UNSPEC,
-	RTN_UNICAST,		/* Gateway or direct route	*/
-	RTN_LOCAL,		/* Accept locally		*/
-	RTN_BROADCAST,		/* Accept locally as broadcast,
-				   send as broadcast */
-	RTN_ANYCAST,		/* Accept locally as broadcast,
-				   but send as unicast */
-	RTN_MULTICAST,		/* Multicast route		*/
-	RTN_BLACKHOLE,		/* Drop				*/
-	RTN_UNREACHABLE,	/* Destination is unreachable   */
-	RTN_PROHIBIT,		/* Administratively prohibited	*/
-	RTN_THROW,		/* Not in this table		*/
-	RTN_NAT,		/* Translate this address	*/
-	RTN_XRESOLVE,		/* Use external resolver	*/
-	__RTN_MAX
-};
-
-#define RTN_MAX (__RTN_MAX - 1)
-
-
-/* rtm_protocol */
-
-#define RTPROT_UNSPEC	0
-#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
-				   not used by current IPv4 */
-#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
-#define RTPROT_BOOT	3	/* Route installed during boot		*/
-#define RTPROT_STATIC	4	/* Route installed by administrator	*/
-
-/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
-   they are just passed from user and back as is.
-   It will be used by hypothetical multiple routing daemons.
-   Note that protocol values should be standardized in order to
-   avoid conflicts.
- */
-
-#define RTPROT_GATED	8	/* Apparently, GateD */
-#define RTPROT_RA	9	/* RDISC/ND router advertisements */
-#define RTPROT_MRT	10	/* Merit MRT */
-#define RTPROT_ZEBRA	11	/* Zebra */
-#define RTPROT_BIRD	12	/* BIRD */
-#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
-#define RTPROT_XORP	14	/* XORP */
-#define RTPROT_NTK	15	/* Netsukuku */
-#define RTPROT_DHCP	16      /* DHCP client */
-
-/* rtm_scope
-
-   Really it is not scope, but sort of distance to the destination.
-   NOWHERE are reserved for not existing destinations, HOST is our
-   local addresses, LINK are destinations, located on directly attached
-   link and UNIVERSE is everywhere in the Universe.
-
-   Intermediate values are also possible f.e. interior routes
-   could be assigned a value between UNIVERSE and LINK.
-*/
-
-enum rt_scope_t {
-	RT_SCOPE_UNIVERSE=0,
-/* User defined values  */
-	RT_SCOPE_SITE=200,
-	RT_SCOPE_LINK=253,
-	RT_SCOPE_HOST=254,
-	RT_SCOPE_NOWHERE=255
-};
-
-/* rtm_flags */
-
-#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
-#define RTM_F_CLONED		0x200	/* This route is cloned		*/
-#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
-#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
-
-/* Reserved table identifiers */
-
-enum rt_class_t {
-	RT_TABLE_UNSPEC=0,
-/* User defined values */
-	RT_TABLE_COMPAT=252,
-	RT_TABLE_DEFAULT=253,
-	RT_TABLE_MAIN=254,
-	RT_TABLE_LOCAL=255,
-	RT_TABLE_MAX=0xFFFFFFFF
-};
-
-
-/* Routing message attributes */
-
-enum rtattr_type_t {
-	RTA_UNSPEC,
-	RTA_DST,
-	RTA_SRC,
-	RTA_IIF,
-	RTA_OIF,
-	RTA_GATEWAY,
-	RTA_PRIORITY,
-	RTA_PREFSRC,
-	RTA_METRICS,
-	RTA_MULTIPATH,
-	RTA_PROTOINFO, /* no longer used */
-	RTA_FLOW,
-	RTA_CACHEINFO,
-	RTA_SESSION, /* no longer used */
-	RTA_MP_ALGO, /* no longer used */
-	RTA_TABLE,
-	RTA_MARK,
-	__RTA_MAX
-};
-
-#define RTA_MAX (__RTA_MAX - 1)
-
-#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
-#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
-
-/* RTM_MULTIPATH --- array of struct rtnexthop.
- *
- * "struct rtnexthop" describes all necessary nexthop information,
- * i.e. parameters of path to a destination via this nexthop.
- *
- * At the moment it is impossible to set different prefsrc, mtu, window
- * and rtt for different paths from multipath.
- */
-
-struct rtnexthop {
-	unsigned short		rtnh_len;
-	unsigned char		rtnh_flags;
-	unsigned char		rtnh_hops;
-	int			rtnh_ifindex;
-};
-
-/* rtnh_flags */
-
-#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
-#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
-#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
-
-/* Macros to handle hexthops */
-
-#define RTNH_ALIGNTO	4
-#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
-#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
-			   ((int)(rtnh)->rtnh_len) <= (len))
-#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
-#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
-#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
-#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
-
-/* RTM_CACHEINFO */
-
-struct rta_cacheinfo {
-	__u32	rta_clntref;
-	__u32	rta_lastuse;
-	__s32	rta_expires;
-	__u32	rta_error;
-	__u32	rta_used;
-
-#define RTNETLINK_HAVE_PEERINFO 1
-	__u32	rta_id;
-	__u32	rta_ts;
-	__u32	rta_tsage;
-};
-
-/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
-
-enum {
-	RTAX_UNSPEC,
-#define RTAX_UNSPEC RTAX_UNSPEC
-	RTAX_LOCK,
-#define RTAX_LOCK RTAX_LOCK
-	RTAX_MTU,
-#define RTAX_MTU RTAX_MTU
-	RTAX_WINDOW,
-#define RTAX_WINDOW RTAX_WINDOW
-	RTAX_RTT,
-#define RTAX_RTT RTAX_RTT
-	RTAX_RTTVAR,
-#define RTAX_RTTVAR RTAX_RTTVAR
-	RTAX_SSTHRESH,
-#define RTAX_SSTHRESH RTAX_SSTHRESH
-	RTAX_CWND,
-#define RTAX_CWND RTAX_CWND
-	RTAX_ADVMSS,
-#define RTAX_ADVMSS RTAX_ADVMSS
-	RTAX_REORDERING,
-#define RTAX_REORDERING RTAX_REORDERING
-	RTAX_HOPLIMIT,
-#define RTAX_HOPLIMIT RTAX_HOPLIMIT
-	RTAX_INITCWND,
-#define RTAX_INITCWND RTAX_INITCWND
-	RTAX_FEATURES,
-#define RTAX_FEATURES RTAX_FEATURES
-	RTAX_RTO_MIN,
-#define RTAX_RTO_MIN RTAX_RTO_MIN
-	RTAX_INITRWND,
-#define RTAX_INITRWND RTAX_INITRWND
-	__RTAX_MAX
-};
-
-#define RTAX_MAX (__RTAX_MAX - 1)
-
-#define RTAX_FEATURE_ECN	0x00000001
-#define RTAX_FEATURE_SACK	0x00000002
-#define RTAX_FEATURE_TIMESTAMP	0x00000004
-#define RTAX_FEATURE_ALLFRAG	0x00000008
-
-struct rta_session {
-	__u8	proto;
-	__u8	pad1;
-	__u16	pad2;
-
-	union {
-		struct {
-			__u16	sport;
-			__u16	dport;
-		} ports;
-
-		struct {
-			__u8	type;
-			__u8	code;
-			__u16	ident;
-		} icmpt;
-
-		__u32		spi;
-	} u;
-};
-
-/****
- *		General form of address family dependent message.
- ****/
-
-struct rtgenmsg {
-	unsigned char		rtgen_family;
-};
-
-/*****************************************************************
- *		Link layer specific messages.
- ****/
-
-/* struct ifinfomsg
- * passes link level specific information, not dependent
- * on network protocol.
- */
-
-struct ifinfomsg {
-	unsigned char	ifi_family;
-	unsigned char	__ifi_pad;
-	unsigned short	ifi_type;		/* ARPHRD_* */
-	int		ifi_index;		/* Link index	*/
-	unsigned	ifi_flags;		/* IFF_* flags	*/
-	unsigned	ifi_change;		/* IFF_* change mask */
-};
-
-/********************************************************************
- *		prefix information 
- ****/
-
-struct prefixmsg {
-	unsigned char	prefix_family;
-	unsigned char	prefix_pad1;
-	unsigned short	prefix_pad2;
-	int		prefix_ifindex;
-	unsigned char	prefix_type;
-	unsigned char	prefix_len;
-	unsigned char	prefix_flags;
-	unsigned char	prefix_pad3;
-};
-
-enum 
-{
-	PREFIX_UNSPEC,
-	PREFIX_ADDRESS,
-	PREFIX_CACHEINFO,
-	__PREFIX_MAX
-};
-
-#define PREFIX_MAX	(__PREFIX_MAX - 1)
-
-struct prefix_cacheinfo {
-	__u32	preferred_time;
-	__u32	valid_time;
-};
-
-
-/*****************************************************************
- *		Traffic control messages.
- ****/
-
-struct tcmsg {
-	unsigned char	tcm_family;
-	unsigned char	tcm__pad1;
-	unsigned short	tcm__pad2;
-	int		tcm_ifindex;
-	__u32		tcm_handle;
-	__u32		tcm_parent;
-	__u32		tcm_info;
-};
-
-enum {
-	TCA_UNSPEC,
-	TCA_KIND,
-	TCA_OPTIONS,
-	TCA_STATS,
-	TCA_XSTATS,
-	TCA_RATE,
-	TCA_FCNT,
-	TCA_STATS2,
-	TCA_STAB,
-	__TCA_MAX
-};
-
-#define TCA_MAX (__TCA_MAX - 1)
-
-#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
-#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
-
-/********************************************************************
- *		Neighbor Discovery userland options
- ****/
-
-struct nduseroptmsg {
-	unsigned char	nduseropt_family;
-	unsigned char	nduseropt_pad1;
-	unsigned short	nduseropt_opts_len;	/* Total length of options */
-	int		nduseropt_ifindex;
-	__u8		nduseropt_icmp_type;
-	__u8		nduseropt_icmp_code;
-	unsigned short	nduseropt_pad2;
-	unsigned int	nduseropt_pad3;
-	/* Followed by one or more ND options */
-};
-
-enum {
-	NDUSEROPT_UNSPEC,
-	NDUSEROPT_SRCADDR,
-	__NDUSEROPT_MAX
-};
-
-#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
-
-#ifndef __KERNEL__
-/* RTnetlink multicast groups - backwards compatibility for userspace */
-#define RTMGRP_LINK		1
-#define RTMGRP_NOTIFY		2
-#define RTMGRP_NEIGH		4
-#define RTMGRP_TC		8
-
-#define RTMGRP_IPV4_IFADDR	0x10
-#define RTMGRP_IPV4_MROUTE	0x20
-#define RTMGRP_IPV4_ROUTE	0x40
-#define RTMGRP_IPV4_RULE	0x80
-
-#define RTMGRP_IPV6_IFADDR	0x100
-#define RTMGRP_IPV6_MROUTE	0x200
-#define RTMGRP_IPV6_ROUTE	0x400
-#define RTMGRP_IPV6_IFINFO	0x800
-
-#define RTMGRP_DECnet_IFADDR    0x1000
-#define RTMGRP_DECnet_ROUTE     0x4000
-
-#define RTMGRP_IPV6_PREFIX	0x20000
-#endif
-
-/* RTnetlink multicast groups */
-enum rtnetlink_groups {
-	RTNLGRP_NONE,
-#define RTNLGRP_NONE		RTNLGRP_NONE
-	RTNLGRP_LINK,
-#define RTNLGRP_LINK		RTNLGRP_LINK
-	RTNLGRP_NOTIFY,
-#define RTNLGRP_NOTIFY		RTNLGRP_NOTIFY
-	RTNLGRP_NEIGH,
-#define RTNLGRP_NEIGH		RTNLGRP_NEIGH
-	RTNLGRP_TC,
-#define RTNLGRP_TC		RTNLGRP_TC
-	RTNLGRP_IPV4_IFADDR,
-#define RTNLGRP_IPV4_IFADDR	RTNLGRP_IPV4_IFADDR
-	RTNLGRP_IPV4_MROUTE,
-#define	RTNLGRP_IPV4_MROUTE	RTNLGRP_IPV4_MROUTE
-	RTNLGRP_IPV4_ROUTE,
-#define RTNLGRP_IPV4_ROUTE	RTNLGRP_IPV4_ROUTE
-	RTNLGRP_IPV4_RULE,
-#define RTNLGRP_IPV4_RULE	RTNLGRP_IPV4_RULE
-	RTNLGRP_IPV6_IFADDR,
-#define RTNLGRP_IPV6_IFADDR	RTNLGRP_IPV6_IFADDR
-	RTNLGRP_IPV6_MROUTE,
-#define RTNLGRP_IPV6_MROUTE	RTNLGRP_IPV6_MROUTE
-	RTNLGRP_IPV6_ROUTE,
-#define RTNLGRP_IPV6_ROUTE	RTNLGRP_IPV6_ROUTE
-	RTNLGRP_IPV6_IFINFO,
-#define RTNLGRP_IPV6_IFINFO	RTNLGRP_IPV6_IFINFO
-	RTNLGRP_DECnet_IFADDR,
-#define RTNLGRP_DECnet_IFADDR	RTNLGRP_DECnet_IFADDR
-	RTNLGRP_NOP2,
-	RTNLGRP_DECnet_ROUTE,
-#define RTNLGRP_DECnet_ROUTE	RTNLGRP_DECnet_ROUTE
-	RTNLGRP_DECnet_RULE,
-#define RTNLGRP_DECnet_RULE	RTNLGRP_DECnet_RULE
-	RTNLGRP_NOP4,
-	RTNLGRP_IPV6_PREFIX,
-#define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
-	RTNLGRP_IPV6_RULE,
-#define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
-	RTNLGRP_ND_USEROPT,
-#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
-	RTNLGRP_PHONET_IFADDR,
-#define RTNLGRP_PHONET_IFADDR	RTNLGRP_PHONET_IFADDR
-	RTNLGRP_PHONET_ROUTE,
-#define RTNLGRP_PHONET_ROUTE	RTNLGRP_PHONET_ROUTE
-	RTNLGRP_DCB,
-#define RTNLGRP_DCB		RTNLGRP_DCB
-	__RTNLGRP_MAX
-};
-#define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
-
-/* TC action piece */
-struct tcamsg {
-	unsigned char	tca_family;
-	unsigned char	tca__pad1;
-	unsigned short	tca__pad2;
-};
-#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
-#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
-#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
-#define TCAA_MAX 1
-
-/* New extended info filters for IFLA_EXT_MASK */
-#define RTEXT_FILTER_VF		(1 << 0)
-
-/* End of information exported to user level */
-
-#ifdef __KERNEL__
 
 #include <linux/mutex.h>
 #include <linux/netdevice.h>
+#include <uapi/linux/rtnetlink.h>
 
 extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
 extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
@@ -675,7 +69,4 @@ extern int ndo_dflt_fdb_dump(struct sk_buff *skb,
 			     struct netlink_callback *cb,
 			     struct net_device *dev,
 			     int idx);
-#endif /* __KERNEL__ */
-
-
 #endif	/* __LINUX_RTNETLINK_H */
diff --git a/include/linux/scc.h b/include/linux/scc.h
index 3495bd953cc6bfef1c64a7cebb88fa4e9cc2fe3a..c5a004962679b6025b177d3b56176406617d8781 100644
--- a/include/linux/scc.h
+++ b/include/linux/scc.h
@@ -1,175 +1,9 @@
 /* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
 #ifndef	_SCC_H
 #define	_SCC_H
 
+#include <uapi/linux/scc.h>
 
-/* selection of hardware types */
-
-#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE		0x01    /* hardware type for EAGLE card */
-#define PC100		0x02	/* hardware type for PC100 card */
-#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
-#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
-	SIOCSCCRESERVED = SIOCDEVPRIVATE,
-	SIOCSCCCFG,
-	SIOCSCCINI,
-	SIOCSCCCHANINI,
-	SIOCSCCSMEM,
-	SIOCSCCGKISS,
-	SIOCSCCSKISS,
-	SIOCSCCGSTAT,
-	SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
-	PARAM_DATA,
-	PARAM_TXDELAY,
-	PARAM_PERSIST,
-	PARAM_SLOTTIME,
-	PARAM_TXTAIL,
-	PARAM_FULLDUP,
-	PARAM_SOFTDCD,		/* was: PARAM_HW */
-	PARAM_MUTE,		/* ??? */
-	PARAM_DTR,
-	PARAM_RTS,
-	PARAM_SPEED,
-	PARAM_ENDDELAY,		/* ??? */
-	PARAM_GROUP,
-	PARAM_IDLE,
-	PARAM_MIN,
-	PARAM_MAXKEY,
-	PARAM_WAIT,
-	PARAM_MAXDEFER,
-	PARAM_TX,
-	PARAM_HWEVENT = 31,
-	PARAM_RETURN = 255	/* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
-	KISS_DUPLEX_HALF,	/* normal CSMA operation */
-	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
-	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
-	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF	65535U	/* to switch off timers */
-#define NO_SUCH_PARAM	65534U	/* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
-	HWEV_DCD_ON,
-	HWEV_DCD_OFF,
-	HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP		0100	/* if set, only tx when all channels clear */
-#define TXGROUP		0200	/* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
-	CLK_DPLL,	/* normal halfduplex operation */
-	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
-	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
-			/* modems without clock regeneration */
-	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
-			/* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
-	TXS_IDLE,	/* Transmitter off, no data pending */
-	TXS_BUSY,	/* waiting for permission to send / tailtime */
-	TXS_ACTIVE,	/* Transmitter on, sending data */
-	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
-	TXS_IDLE2,	/* Transmitter on, no data pending */
-	TXS_WAIT,	/* Waiting for Mintime to expire */
-	TXS_TIMEOUT	/* We had a transmission timeout */
-};
-
-typedef unsigned long io_port;	/* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
-        long rxints;            /* Receiver interrupts */
-        long txints;            /* Transmitter interrupts */
-        long exints;            /* External/status interrupts */
-        long spints;            /* Special receiver interrupts */
-
-        long txframes;          /* Packets sent */
-        long rxframes;          /* Number of Frames Actually Received */
-        long rxerrs;            /* CRC Errors */
-        long txerrs;		/* KISS errors */
-        
-	unsigned int nospace;	/* "Out of buffers" */
-	unsigned int rx_over;	/* Receiver Overruns */
-	unsigned int tx_under;	/* Transmitter Underruns */
-
-	unsigned int tx_state;	/* Transmitter state */
-	int tx_queued;		/* tx frames enqueued */
-
-	unsigned int maxqueue;	/* allocated tx_buffers */
-	unsigned int bufsize;	/* used buffersize */
-};
-
-struct scc_modem {
-	long speed;		/* Line speed, bps */
-	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
-	char nrz;		/* NRZ instead of NRZI */	
-};
-
-struct scc_kiss_cmd {
-	int  	 command;	/* one of the KISS-Commands defined above */
-	unsigned param;		/* KISS-Param */
-};
-
-struct scc_hw_config {
-	io_port data_a;		/* data port channel A */
-	io_port ctrl_a;		/* control port channel A */
-	io_port data_b;		/* data port channel B */
-	io_port ctrl_b;		/* control port channel B */
-	io_port vector_latch;	/* INTACK-Latch (#) */
-	io_port	special;	/* special function port */
-
-	int	irq;		/* irq */
-	long	clock;		/* clock */
-	char	option;		/* command for function port */
-
-	char brand;		/* hardware type */
-	char escc;		/* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
-	unsigned int dummy;
-	unsigned int bufsize;
-};
-
-struct scc_calibrate {
-	unsigned int time;
-	unsigned char pattern;
-};
-
-#ifdef __KERNEL__
 
 enum {TX_OFF, TX_ON};	/* command for scc_key_trx() */
 
@@ -248,5 +82,4 @@ struct scc_channel {
 	spinlock_t	lock;		/* Channel guard lock */
 };
 
-#endif /* defined(__KERNEL__) */
 #endif /* defined(_SCC_H) */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index a83ca5816ecbc1e2f41a958c3f6830a50f8931b9..0dd42a02df2e851e0847df640dd559f3689c36ed 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1,48 +1,8 @@
 #ifndef _LINUX_SCHED_H
 #define _LINUX_SCHED_H
 
-/*
- * cloning flags:
- */
-#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
-#define CLONE_VM	0x00000100	/* set if VM shared between processes */
-#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
-#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
-#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
-#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
-#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
-#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
-#define CLONE_THREAD	0x00010000	/* Same thread group? */
-#define CLONE_NEWNS	0x00020000	/* New namespace group? */
-#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
-#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
-#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
-#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
-#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
-#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
-#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
-/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
-   and is now available for re-use. */
-#define CLONE_NEWUTS		0x04000000	/* New utsname group? */
-#define CLONE_NEWIPC		0x08000000	/* New ipcs */
-#define CLONE_NEWUSER		0x10000000	/* New user namespace */
-#define CLONE_NEWPID		0x20000000	/* New pid namespace */
-#define CLONE_NEWNET		0x40000000	/* New network namespace */
-#define CLONE_IO		0x80000000	/* Clone io context */
-
-/*
- * Scheduling policies
- */
-#define SCHED_NORMAL		0
-#define SCHED_FIFO		1
-#define SCHED_RR		2
-#define SCHED_BATCH		3
-/* SCHED_ISO: reserved but not implemented yet */
-#define SCHED_IDLE		5
-/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
-#define SCHED_RESET_ON_FORK     0x40000000
+#include <uapi/linux/sched.h>
 
-#ifdef __KERNEL__
 
 struct sched_param {
 	int sched_priority;
@@ -2828,6 +2788,4 @@ static inline unsigned long rlimit_max(unsigned int limit)
 	return task_rlimit_max(current, limit);
 }
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index fb3c5a8fef3db5712fccfda96b9e44b9112da1d5..005bf3e38db555a879f9bd0c0f9b4a8ba0f4616d 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -1,76 +1,8 @@
 #ifndef _SCREEN_INFO_H
 #define _SCREEN_INFO_H
 
-#include <linux/types.h>
+#include <uapi/linux/screen_info.h>
 
-/*
- * These are set up by the setup-routine at boot-time:
- */
-
-struct screen_info {
-	__u8  orig_x;		/* 0x00 */
-	__u8  orig_y;		/* 0x01 */
-	__u16 ext_mem_k;	/* 0x02 */
-	__u16 orig_video_page;	/* 0x04 */
-	__u8  orig_video_mode;	/* 0x06 */
-	__u8  orig_video_cols;	/* 0x07 */
-	__u8  flags;		/* 0x08 */
-	__u8  unused2;		/* 0x09 */
-	__u16 orig_video_ega_bx;/* 0x0a */
-	__u16 unused3;		/* 0x0c */
-	__u8  orig_video_lines;	/* 0x0e */
-	__u8  orig_video_isVGA;	/* 0x0f */
-	__u16 orig_video_points;/* 0x10 */
-
-	/* VESA graphic mode -- linear frame buffer */
-	__u16 lfb_width;	/* 0x12 */
-	__u16 lfb_height;	/* 0x14 */
-	__u16 lfb_depth;	/* 0x16 */
-	__u32 lfb_base;		/* 0x18 */
-	__u32 lfb_size;		/* 0x1c */
-	__u16 cl_magic, cl_offset; /* 0x20 */
-	__u16 lfb_linelength;	/* 0x24 */
-	__u8  red_size;		/* 0x26 */
-	__u8  red_pos;		/* 0x27 */
-	__u8  green_size;	/* 0x28 */
-	__u8  green_pos;	/* 0x29 */
-	__u8  blue_size;	/* 0x2a */
-	__u8  blue_pos;		/* 0x2b */
-	__u8  rsvd_size;	/* 0x2c */
-	__u8  rsvd_pos;		/* 0x2d */
-	__u16 vesapm_seg;	/* 0x2e */
-	__u16 vesapm_off;	/* 0x30 */
-	__u16 pages;		/* 0x32 */
-	__u16 vesa_attributes;	/* 0x34 */
-	__u32 capabilities;     /* 0x36 */
-	__u8  _reserved[6];	/* 0x3a */
-} __attribute__((packed));
-
-#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
-#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
-#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
-#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
-#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
-#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
-
-#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
-#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
-#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
-
-#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
-
-#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
-#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
-
-#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
-
-#define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
-
-#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
-
-#define VIDEO_CAPABILITY_SKIP_QUIRKS	(1 << 0)
-
-#ifdef __KERNEL__
 extern struct screen_info screen_info;
 
 #define ORIG_X			(screen_info.orig_x)
@@ -81,6 +13,4 @@ extern struct screen_info screen_info;
 #define ORIG_VIDEO_LINES	(screen_info.orig_video_lines)
 #define ORIG_VIDEO_ISVGA	(screen_info.orig_video_isVGA)
 #define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
-#endif /* __KERNEL__ */
-
 #endif /* _SCREEN_INFO_H */
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
index 9995c7fc3f60ce08e2b7474fc6cd955ce736e7a5..fe7a967d7de42fae0610e57b4485bb5dba6d2034 100644
--- a/include/linux/sdla.h
+++ b/include/linux/sdla.h
@@ -19,100 +19,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef SDLA_H
 #define SDLA_H
 
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A			5020
-#define SDLA_S502E			5021
-#define SDLA_S503			5030
-#define SDLA_S507			5070
-#define SDLA_S508			5080
-#define SDLA_S509			5090
-#define SDLA_UNKNOWN			-1
-
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35		0x00
-#define SDLA_S508_PORT_RS232		0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M			0x00
-#define SDLA_CPU_5M			0x01
-#define SDLA_CPU_7M			0x02
-#define SDLA_CPU_8M			0x03
-#define SDLA_CPU_10M			0x04
-#define SDLA_CPU_16M			0x05
-#define SDLA_CPU_12M			0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
-   int  addr;
-   int  len;
-   void __user *data;
-};
-
-#define SDLA_START			(FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
+#include <uapi/linux/sdla.h>
 
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR			0x0000
-#define SDLA_CONF_ADDR			0x0010
-#define SDLA_S502A_NMIADDR		0x0066
-#define SDLA_CODE_BASEADDR		0x0100
-#define SDLA_WINDOW_SIZE		0x2000
-#define SDLA_ADDR_MASK			0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA			4080
-#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI			24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
-   short station;
-   short config;
-   short kbaud;
-   short clocking;
-   short max_frm;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
-   short config;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-};
-
-#ifdef __KERNEL__
 
 /* important Z80 window addresses */
 #define SDLA_CONTROL_WND		0xE000
@@ -331,5 +242,3 @@ struct buf_entry {
 } __attribute__((packed));
 
 #endif
-
-#endif
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 84f6320da50f0a9fe03f30154b9137f9b42dfc74..6f19cfd1840e4adea37b84dea76175361d3187bc 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -1,50 +1,8 @@
 #ifndef _LINUX_SECCOMP_H
 #define _LINUX_SECCOMP_H
 
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/seccomp.h>
 
-
-/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
-#define SECCOMP_MODE_DISABLED	0 /* seccomp is not in use. */
-#define SECCOMP_MODE_STRICT	1 /* uses hard-coded filter. */
-#define SECCOMP_MODE_FILTER	2 /* uses user-supplied filter. */
-
-/*
- * All BPF programs must return a 32-bit value.
- * The bottom 16-bits are for optional return data.
- * The upper 16-bits are ordered from least permissive values to most.
- *
- * The ordering ensures that a min_t() over composed return values always
- * selects the least permissive choice.
- */
-#define SECCOMP_RET_KILL	0x00000000U /* kill the task immediately */
-#define SECCOMP_RET_TRAP	0x00030000U /* disallow and force a SIGSYS */
-#define SECCOMP_RET_ERRNO	0x00050000U /* returns an errno */
-#define SECCOMP_RET_TRACE	0x7ff00000U /* pass to a tracer or disallow */
-#define SECCOMP_RET_ALLOW	0x7fff0000U /* allow */
-
-/* Masks for the return value sections. */
-#define SECCOMP_RET_ACTION	0x7fff0000U
-#define SECCOMP_RET_DATA	0x0000ffffU
-
-/**
- * struct seccomp_data - the format the BPF program executes over.
- * @nr: the system call number
- * @arch: indicates system call convention as an AUDIT_ARCH_* value
- *        as defined in <linux/audit.h>.
- * @instruction_pointer: at the time of the system call.
- * @args: up to 6 system call arguments always stored as 64-bit values
- *        regardless of the architecture.
- */
-struct seccomp_data {
-	int nr;
-	__u32 arch;
-	__u64 instruction_pointer;
-	__u64 args[6];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_SECCOMP
 
 #include <linux/thread_info.h>
@@ -129,5 +87,4 @@ static inline void get_seccomp_filter(struct task_struct *tsk)
 	return;
 }
 #endif /* CONFIG_SECCOMP_FILTER */
-#endif /* __KERNEL__ */
 #endif /* _LINUX_SECCOMP_H */
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index 33406174cbe8429d8be9531c029993891059958b..da1b33b33af7f45f6642a3d21e40b9094265c1b3 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -1,54 +1,7 @@
 #ifndef _LINUX_SECUREBITS_H
 #define _LINUX_SECUREBITS_H 1
 
-/* Each securesetting is implemented using two bits. One bit specifies
-   whether the setting is on or off. The other bit specify whether the
-   setting is locked or not. A setting which is locked cannot be
-   changed from user-level. */
-#define issecure_mask(X)	(1 << (X))
-#ifdef __KERNEL__
-#define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
-#endif
-
-#define SECUREBITS_DEFAULT 0x00000000
-
-/* When set UID 0 has no special privileges. When unset, we support
-   inheritance of root-permissions and suid-root executable under
-   compatibility mode. We raise the effective and inheritable bitmasks
-   *of the executable file* if the effective uid of the new process is
-   0. If the real uid is 0, we raise the effective (legacy) bit of the
-   executable file. */
-#define SECURE_NOROOT			0
-#define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
-
-#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
-#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
-
-/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
-   When unset, to provide compatiblility with old programs relying on
-   set*uid to gain/lose privilege, transitions to/from uid 0 cause
-   capabilities to be gained/lost. */
-#define SECURE_NO_SETUID_FIXUP		2
-#define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
-
-#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
-#define SECBIT_NO_SETUID_FIXUP_LOCKED \
-			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
-
-/* When set, a process can retain its capabilities even after
-   transitioning to a non-root user (the set-uid fixup suppressed by
-   bit 2). Bit-4 is cleared when a process calls exec(); setting both
-   bit 4 and 5 will create a barrier through exec that no exec()'d
-   child can use this feature again. */
-#define SECURE_KEEP_CAPS		4
-#define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
-
-#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
-#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
-
-#define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
-				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
-				 issecure_mask(SECURE_KEEP_CAPS))
-#define SECURE_ALL_LOCKS	(SECURE_ALL_BITS << 1)
+#include <uapi/linux/securebits.h>
 
+#define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
 #endif /* !_LINUX_SECUREBITS_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 10d6b226afc5aebdda9f3a65c72550e1af54d3c5..53d42650b1935f255feac8bc88401240057068c6 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -1,85 +1,10 @@
 #ifndef _LINUX_SEM_H
 #define _LINUX_SEM_H
 
-#include <linux/ipc.h>
-
-/* semop flags */
-#define SEM_UNDO        0x1000  /* undo the operation on exit */
-
-/* semctl Command Definitions. */
-#define GETPID  11       /* get sempid */
-#define GETVAL  12       /* get semval */
-#define GETALL  13       /* get all semval's */
-#define GETNCNT 14       /* get semncnt */
-#define GETZCNT 15       /* get semzcnt */
-#define SETVAL  16       /* set semval */
-#define SETALL  17       /* set all semval's */
-
-/* ipcs ctl cmds */
-#define SEM_STAT 18
-#define SEM_INFO 19
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct semid_ds {
-	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	__kernel_time_t	sem_ctime;		/* last change time */
-	struct sem	*sem_base;		/* ptr to first semaphore in array */
-	struct sem_queue *sem_pending;		/* pending operations to be processed */
-	struct sem_queue **sem_pending_last;	/* last pending operation */
-	struct sem_undo	*undo;			/* undo requests on this array */
-	unsigned short	sem_nsems;		/* no. of semaphores in array */
-};
-
-/* Include the definition of semid64_ds */
-#include <asm/sembuf.h>
-
-/* semop system calls takes an array of these. */
-struct sembuf {
-	unsigned short  sem_num;	/* semaphore index in array */
-	short		sem_op;		/* semaphore operation */
-	short		sem_flg;	/* operation flags */
-};
-
-/* arg for semctl system calls. */
-union semun {
-	int val;			/* value for SETVAL */
-	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
-	unsigned short __user *array;	/* array for GETALL & SETALL */
-	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
-	void __user *__pad;
-};
-
-struct  seminfo {
-	int semmap;
-	int semmni;
-	int semmns;
-	int semmnu;
-	int semmsl;
-	int semopm;
-	int semume;
-	int semusz;
-	int semvmx;
-	int semaem;
-};
-
-#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
-#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
-#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
-#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
-#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
-#define SEMAEM  SEMVMX          /* adjust on exit max value */
-
-/* unused */
-#define SEMUME  SEMOPM          /* max num of undo entries per process */
-#define SEMMNU  SEMMNS          /* num of undo structures system wide */
-#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
-#define SEMUSZ  20		/* sizeof struct sem_undo */
-
-#ifdef __KERNEL__
 #include <linux/atomic.h>
 #include <linux/rcupdate.h>
 #include <linux/cache.h>
+#include <uapi/linux/sem.h>
 
 struct task_struct;
 
@@ -122,6 +47,4 @@ static inline void exit_sem(struct task_struct *tsk)
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SEM_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 861e51de476bf8e55399f5796cfa68e89ba3718f..0916107c77f96fafb990cb09c00ad5151d62bed7 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -6,16 +6,11 @@
  * Redistribution of this file is permitted under the terms of the GNU 
  * Public License (GPL)
  */
-
 #ifndef _LINUX_SERIAL_H
 #define _LINUX_SERIAL_H
 
-#include <linux/types.h>
-
-#include <linux/tty_flags.h>
-
-#ifdef __KERNEL__
 #include <asm/page.h>
+#include <uapi/linux/serial.h>
 
 
 /*
@@ -33,118 +28,6 @@ struct async_icount {
  */
 #define SERIAL_XMIT_SIZE PAGE_SIZE
 
-#endif
-
-struct serial_struct {
-	int	type;
-	int	line;
-	unsigned int	port;
-	int	irq;
-	int	flags;
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	baud_base;
-	unsigned short	close_delay;
-	char	io_type;
-	char	reserved_char[1];
-	int	hub6;
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned short	closing_wait2; /* no longer used... */
-	unsigned char	*iomem_base;
-	unsigned short	iomem_reg_shift;
-	unsigned int	port_high;
-	unsigned long	iomap_base;	/* cookie passed into ioremap */
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define ASYNC_CLOSING_WAIT_INF	0
-#define ASYNC_CLOSING_WAIT_NONE	65535
-
-/*
- * These are the supported serial types.
- */
-#define PORT_UNKNOWN	0
-#define PORT_8250	1
-#define PORT_16450	2
-#define PORT_16550	3
-#define PORT_16550A	4
-#define PORT_CIRRUS     5	/* usurped by cyclades.c */
-#define PORT_16650	6
-#define PORT_16650V2	7
-#define PORT_16750	8
-#define PORT_STARTECH	9	/* usurped by cyclades.c */
-#define PORT_16C950	10	/* Oxford Semiconductor */
-#define PORT_16654	11
-#define PORT_16850	12
-#define PORT_RSA	13	/* RSA-DV II/S card */
-#define PORT_MAX	13
-
-#define SERIAL_IO_PORT	0
-#define SERIAL_IO_HUB6	1
-#define SERIAL_IO_MEM	2
-
-#define UART_CLEAR_FIFO		0x01
-#define UART_USE_FIFO		0x02
-#define UART_STARTECH		0x04
-#define UART_NATSEMI		0x08
-
-
-/*
- * Multiport serial configuration structure --- external structure
- */
-struct serial_multiport_struct {
-	int		irq;
-	int		port1;
-	unsigned char	mask1, match1;
-	int		port2;
-	unsigned char	mask2, match2;
-	int		port3;
-	unsigned char	mask3, match3;
-	int		port4;
-	unsigned char	mask4, match4;
-	int		port_monitor;
-	int	reserved[32];
-};
-
-/*
- * Serial input interrupt line counters -- external structure
- * Four lines can interrupt: CTS, DSR, RI, DCD
- */
-struct serial_icounter_struct {
-	int cts, dsr, rng, dcd;
-	int rx, tx;
-	int frame, overrun, parity, brk;
-	int buf_overrun;
-	int reserved[9];
-};
-
-/*
- * Serial interface for controlling RS485 settings on chips with suitable
- * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
- * platform. The set function returns the new state, with any unsupported bits
- * reverted appropriately.
- */
-
-struct serial_rs485 {
-	__u32	flags;			/* RS485 feature flags */
-#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
-#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
-							   RTS pin when
-							   sending */
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
-							   RTS pin after sent*/
-#define SER_RS485_RX_DURING_TX		(1 << 4)
-	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
-	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
-	__u32	padding[5];		/* Memory is cheap, new structs
-					   are a royal PITA .. */
-};
-
-#ifdef __KERNEL__
 #include <linux/compiler.h>
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f9b22ec7a9f383199d58431c6e6a1ec136ebe46c..3c430228d232a56023229e45ee1cf1d0020504c6 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,202 +20,6 @@
 #ifndef LINUX_SERIAL_CORE_H
 #define LINUX_SERIAL_CORE_H
 
-#include <linux/serial.h>
-
-/*
- * The type definitions.  These are from Ted Ts'o's serial.h
- */
-#define PORT_UNKNOWN	0
-#define PORT_8250	1
-#define PORT_16450	2
-#define PORT_16550	3
-#define PORT_16550A	4
-#define PORT_CIRRUS	5
-#define PORT_16650	6
-#define PORT_16650V2	7
-#define PORT_16750	8
-#define PORT_STARTECH	9
-#define PORT_16C950	10
-#define PORT_16654	11
-#define PORT_16850	12
-#define PORT_RSA	13
-#define PORT_NS16550A	14
-#define PORT_XSCALE	15
-#define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
-#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
-#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
-#define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
-#define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
-#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
-#define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
-#define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
-#define PORT_MAX_8250	23	/* max port ID */
-
-/*
- * ARM specific type numbers.  These are not currently guaranteed
- * to be implemented, and will change in the future.  These are
- * separate so any additions to the old serial.c that occur before
- * we are merged can be easily merged here.
- */
-#define PORT_PXA	31
-#define PORT_AMBA	32
-#define PORT_CLPS711X	33
-#define PORT_SA1100	34
-#define PORT_UART00	35
-#define PORT_21285	37
-
-/* Sparc type numbers.  */
-#define PORT_SUNZILOG	38
-#define PORT_SUNSAB	39
-
-/* DEC */
-#define PORT_DZ		46
-#define PORT_ZS		47
-
-/* Parisc type numbers. */
-#define PORT_MUX	48
-
-/* Atmel AT91 / AT32 SoC */
-#define PORT_ATMEL	49
-
-/* Macintosh Zilog type numbers */
-#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
-#define PORT_PMAC_ZILOG	51
-
-/* SH-SCI */
-#define PORT_SCI	52
-#define PORT_SCIF	53
-#define PORT_IRDA	54
-
-/* Samsung S3C2410 SoC and derivatives thereof */
-#define PORT_S3C2410    55
-
-/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
-#define PORT_IP22ZILOG	56
-
-/* Sharp LH7a40x -- an ARM9 SoC series */
-#define PORT_LH7A40X	57
-
-/* PPC CPM type number */
-#define PORT_CPM        58
-
-/* MPC52xx (and MPC512x) type numbers */
-#define PORT_MPC52xx	59
-
-/* IBM icom */
-#define PORT_ICOM	60
-
-/* Samsung S3C2440 SoC */
-#define PORT_S3C2440	61
-
-/* Motorola i.MX SoC */
-#define PORT_IMX	62
-
-/* Marvell MPSC */
-#define PORT_MPSC	63
-
-/* TXX9 type number */
-#define PORT_TXX9	64
-
-/* NEC VR4100 series SIU/DSIU */
-#define PORT_VR41XX_SIU		65
-#define PORT_VR41XX_DSIU	66
-
-/* Samsung S3C2400 SoC */
-#define PORT_S3C2400	67
-
-/* M32R SIO */
-#define PORT_M32R_SIO	68
-
-/*Digi jsm */
-#define PORT_JSM        69
-
-#define PORT_PNX8XXX	70
-
-/* Hilscher netx */
-#define PORT_NETX	71
-
-/* SUN4V Hypervisor Console */
-#define PORT_SUNHV	72
-
-#define PORT_S3C2412	73
-
-/* Xilinx uartlite */
-#define PORT_UARTLITE	74
-
-/* Blackfin bf5xx */
-#define PORT_BFIN	75
-
-/* Micrel KS8695 */
-#define PORT_KS8695	76
-
-/* Broadcom SB1250, etc. SOC */
-#define PORT_SB1250_DUART	77
-
-/* Freescale ColdFire */
-#define PORT_MCF	78
-
-/* Blackfin SPORT */
-#define PORT_BFIN_SPORT		79
-
-/* MN10300 on-chip UART numbers */
-#define PORT_MN10300		80
-#define PORT_MN10300_CTS	81
-
-#define PORT_SC26XX	82
-
-/* SH-SCI */
-#define PORT_SCIFA	83
-
-#define PORT_S3C6400	84
-
-/* NWPSERIAL */
-#define PORT_NWPSERIAL	85
-
-/* MAX3100 */
-#define PORT_MAX3100    86
-
-/* Timberdale UART */
-#define PORT_TIMBUART	87
-
-/* Qualcomm MSM SoCs */
-#define PORT_MSM	88
-
-/* BCM63xx family SoCs */
-#define PORT_BCM63XX	89
-
-/* Aeroflex Gaisler GRLIB APBUART */
-#define PORT_APBUART    90
-
-/* Altera UARTs */
-#define PORT_ALTERA_JTAGUART	91
-#define PORT_ALTERA_UART	92
-
-/* SH-SCI */
-#define PORT_SCIFB	93
-
-/* MAX310X */
-#define PORT_MAX310X	94
-
-/* High Speed UART for Medfield */
-#define PORT_MFD	95
-
-/* TI OMAP-UART */
-#define PORT_OMAP	96
-
-/* VIA VT8500 SoC */
-#define PORT_VT8500	97
-
-/* Xilinx PSS UART */
-#define PORT_XUARTPS	98
-
-/* Atheros AR933X SoC */
-#define PORT_AR933X	99
-
-/* Energy Micro efm32 SoC */
-#define PORT_EFMUART   100
-
-#ifdef __KERNEL__
 
 #include <linux/compiler.h>
 #include <linux/interrupt.h>
@@ -226,6 +30,7 @@
 #include <linux/mutex.h>
 #include <linux/sysrq.h>
 #include <linux/pps_kernel.h>
+#include <uapi/linux/serial_core.h>
 
 struct uart_port;
 struct serial_struct;
@@ -562,6 +367,4 @@ static inline int uart_handle_break(struct uart_port *port)
 					 (cflag) & CRTSCTS || \
 					 !((cflag) & CLOCAL))
 
-#endif
-
 #endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 6d6cfd3e94a348cb578f73c3b019b6121ee8aca1..36aac733840afc1b71deee284cfaf78b973aa673 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -1,6 +1,3 @@
-#ifndef _SERIO_H
-#define _SERIO_H
-
 /*
  * Copyright (C) 1999-2002 Vojtech Pavlik
 *
@@ -8,12 +5,9 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _SERIO_H
+#define _SERIO_H
 
-#include <linux/ioctl.h>
-
-#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -22,6 +16,7 @@
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
+#include <uapi/linux/serio.h>
 
 struct serio {
 	void *port_data;
@@ -152,68 +147,3 @@ static inline void serio_continue_rx(struct serio *serio)
 }
 
 #endif
-
-/*
- * bit masks for use in "interrupt" flags (3rd argument)
- */
-#define SERIO_TIMEOUT	1
-#define SERIO_PARITY	2
-#define SERIO_FRAME	4
-
-/*
- * Serio types
- */
-#define SERIO_XT	0x00
-#define SERIO_8042	0x01
-#define SERIO_RS232	0x02
-#define SERIO_HIL_MLC	0x03
-#define SERIO_PS_PSTHRU	0x05
-#define SERIO_8042_XL	0x06
-
-/*
- * Serio protocols
- */
-#define SERIO_UNKNOWN	0x00
-#define SERIO_MSC	0x01
-#define SERIO_SUN	0x02
-#define SERIO_MS	0x03
-#define SERIO_MP	0x04
-#define SERIO_MZ	0x05
-#define SERIO_MZP	0x06
-#define SERIO_MZPP	0x07
-#define SERIO_VSXXXAA	0x08
-#define SERIO_SUNKBD	0x10
-#define SERIO_WARRIOR	0x18
-#define SERIO_SPACEORB	0x19
-#define SERIO_MAGELLAN	0x1a
-#define SERIO_SPACEBALL	0x1b
-#define SERIO_GUNZE	0x1c
-#define SERIO_IFORCE	0x1d
-#define SERIO_STINGER	0x1e
-#define SERIO_NEWTON	0x1f
-#define SERIO_STOWAWAY	0x20
-#define SERIO_H3600	0x21
-#define SERIO_PS2SER	0x22
-#define SERIO_TWIDKBD	0x23
-#define SERIO_TWIDJOY	0x24
-#define SERIO_HIL	0x25
-#define SERIO_SNES232	0x26
-#define SERIO_SEMTECH	0x27
-#define SERIO_LKKBD	0x28
-#define SERIO_ELO	0x29
-#define SERIO_MICROTOUCH	0x30
-#define SERIO_PENMOUNT	0x31
-#define SERIO_TOUCHRIGHT	0x32
-#define SERIO_TOUCHWIN	0x33
-#define SERIO_TAOSEVM	0x34
-#define SERIO_FUJITSU	0x35
-#define SERIO_ZHENHUA	0x36
-#define SERIO_INEXIO	0x37
-#define SERIO_TOUCHIT213	0x38
-#define SERIO_W8001	0x39
-#define SERIO_DYNAPRO	0x3a
-#define SERIO_HAMPSHIRE	0x3b
-#define SERIO_PS2MULT	0x3c
-#define SERIO_TSC40	0x3d
-
-#endif
diff --git a/include/linux/shm.h b/include/linux/shm.h
index edd086883ccbed5a84f2d44e0212d06b1af315a4..bcf8a6a3ec00d51b08e113248a0ca62d56f8b542 100644
--- a/include/linux/shm.h
+++ b/include/linux/shm.h
@@ -1,88 +1,11 @@
 #ifndef _LINUX_SHM_H_
 #define _LINUX_SHM_H_
 
-#include <linux/ipc.h>
-#include <linux/errno.h>
-#ifdef __KERNEL__
 #include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
-
-/*
- * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
- * be increased by sysctl
- */
+#include <uapi/linux/shm.h>
 
-#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
-#define SHMMIN 1			 /* min shared seg size (bytes) */
-#define SHMMNI 4096			 /* max num of segs system wide */
-#ifdef __KERNEL__
 #define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */
-#else
-#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
-#endif
-#define SHMSEG SHMMNI			 /* max shared segs per process */
-
-#ifdef __KERNEL__
 #include <asm/shmparam.h>
-#endif
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct shmid_ds {
-	struct ipc_perm		shm_perm;	/* operation perms */
-	int			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	__kernel_time_t		shm_ctime;	/* last change time */
-	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
-	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
-	unsigned short		shm_nattch;	/* no. of current attaches */
-	unsigned short 		shm_unused;	/* compatibility */
-	void 			*shm_unused2;	/* ditto - used by DIPC */
-	void			*shm_unused3;	/* unused */
-};
-
-/* Include the definition of shmid64_ds and shminfo64 */
-#include <asm/shmbuf.h>
-
-/* permission flag for shmget */
-#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
-#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
-
-/* mode for attach */
-#define	SHM_RDONLY	010000	/* read-only access */
-#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
-#define	SHM_REMAP	040000	/* take-over region on attach */
-#define	SHM_EXEC	0100000	/* execution access */
-
-/* super user shmctl commands */
-#define SHM_LOCK 	11
-#define SHM_UNLOCK 	12
-
-/* ipcs ctl commands */
-#define SHM_STAT 	13
-#define SHM_INFO 	14
-
-/* Obsolete, used only for backwards compatibility */
-struct	shminfo {
-	int shmmax;
-	int shmmin;
-	int shmmni;
-	int shmseg;
-	int shmall;
-};
-
-struct shm_info {
-	int used_ids;
-	unsigned long shm_tot;	/* total allocated shm */
-	unsigned long shm_rss;	/* total resident shm */
-	unsigned long shm_swp;	/* total swapped shm */
-	unsigned long swap_attempts;
-	unsigned long swap_successes;
-};
-
-#ifdef __KERNEL__
 struct shmid_kernel /* private to the kernel */
 {	
 	struct kern_ipc_perm	shm_perm;
@@ -127,6 +50,4 @@ static inline void exit_shm(struct task_struct *task)
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SHM_H_ */
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 26b424adc84299b6a53c9ad986e4d9350d16b68a..e19a011b43b7632163894ca70dde03ebaac64203 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -1,11 +1,8 @@
 #ifndef _LINUX_SIGNAL_H
 #define _LINUX_SIGNAL_H
 
-#include <asm/signal.h>
-#include <asm/siginfo.h>
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/signal.h>
 
 struct task_struct;
 
@@ -388,6 +385,4 @@ int unhandled_signal(struct task_struct *tsk, int sig);
 
 void signals_init(void);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SIGNAL_H */
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 247399b2979a9a331c976e9f413e4dd122ef7711..eadbe227c25648824c1bbf851c48b99f6ee5f7da 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -4,51 +4,11 @@
  *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
  *
  */
-
 #ifndef _LINUX_SIGNALFD_H
 #define _LINUX_SIGNALFD_H
 
-#include <linux/types.h>
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-
-/* Flags for signalfd4.  */
-#define SFD_CLOEXEC O_CLOEXEC
-#define SFD_NONBLOCK O_NONBLOCK
-
-struct signalfd_siginfo {
-	__u32 ssi_signo;
-	__s32 ssi_errno;
-	__s32 ssi_code;
-	__u32 ssi_pid;
-	__u32 ssi_uid;
-	__s32 ssi_fd;
-	__u32 ssi_tid;
-	__u32 ssi_band;
-	__u32 ssi_overrun;
-	__u32 ssi_trapno;
-	__s32 ssi_status;
-	__s32 ssi_int;
-	__u64 ssi_ptr;
-	__u64 ssi_utime;
-	__u64 ssi_stime;
-	__u64 ssi_addr;
-	__u16 ssi_addr_lsb;
+#include <uapi/linux/signalfd.h>
 
-	/*
-	 * Pad strcture to 128 bytes. Remember to update the
-	 * pad size when you add new members. We use a fixed
-	 * size structure to avoid compatibility problems with
-	 * future versions, and we leave extra space for additional
-	 * members. We use fixed size members because this strcture
-	 * comes out of a read(2) and we really don't want to have
-	 * a compat on read(2).
-	 */
-	__u8 __pad[46];
-};
-
-
-#ifdef __KERNEL__
 
 #ifdef CONFIG_SIGNALFD
 
@@ -71,6 +31,4 @@ static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
 
 #endif /* CONFIG_SIGNALFD */
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SIGNALFD_H */
diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h
index e3e395acc2fda923a893cc3f0ad3def149b16354..e8d702e0fd89951baaf4f8f3b62f2dce559ac1ce 100644
--- a/include/linux/sock_diag.h
+++ b/include/linux/sock_diag.h
@@ -1,29 +1,8 @@
 #ifndef __SOCK_DIAG_H__
 #define __SOCK_DIAG_H__
 
-#include <linux/types.h>
+#include <uapi/linux/sock_diag.h>
 
-#define SOCK_DIAG_BY_FAMILY 20
-
-struct sock_diag_req {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-};
-
-enum {
-	SK_MEMINFO_RMEM_ALLOC,
-	SK_MEMINFO_RCVBUF,
-	SK_MEMINFO_WMEM_ALLOC,
-	SK_MEMINFO_SNDBUF,
-	SK_MEMINFO_FWD_ALLOC,
-	SK_MEMINFO_WMEM_QUEUED,
-	SK_MEMINFO_OPTMEM,
-	SK_MEMINFO_BACKLOG,
-
-	SK_MEMINFO_VARS,
-};
-
-#ifdef __KERNEL__
 struct sk_buff;
 struct nlmsghdr;
 struct sock;
@@ -44,5 +23,4 @@ void sock_diag_save_cookie(void *sk, __u32 *cookie);
 
 int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr);
 
-#endif /* KERNEL */
 #endif
diff --git a/include/linux/socket.h b/include/linux/socket.h
index ba7b2e817cfa9ac76a19c9e96554efd17f9f4888..9a546ff853dc927d94c4d0a0293785d3f461ace8 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -1,30 +1,13 @@
 #ifndef _LINUX_SOCKET_H
 #define _LINUX_SOCKET_H
 
-/*
- * Desired design of maximum size and alignment (see RFC2553)
- */
-#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
-#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
-				/* Implementation specific desired alignment */
-
-typedef unsigned short __kernel_sa_family_t;
-
-struct __kernel_sockaddr_storage {
-	__kernel_sa_family_t	ss_family;		/* address family */
-	/* Following field(s) are implementation specific */
-	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
-				/* space to achieve desired size, */
-				/* _SS_MAXSIZE value minus size of ss_family */
-} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
-
-#ifdef __KERNEL__
 
 #include <asm/socket.h>			/* arch-dependent defines	*/
 #include <linux/sockios.h>		/* the SIOCxxx I/O controls	*/
 #include <linux/uio.h>			/* iovec support		*/
 #include <linux/types.h>		/* pid_t			*/
 #include <linux/compiler.h>		/* __user			*/
+#include <uapi/linux/socket.h>
 
 struct pid;
 struct cred;
@@ -340,5 +323,4 @@ extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen
 			  unsigned int flags, struct timespec *timeout);
 extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
 			  unsigned int vlen, unsigned int flags);
-#endif /* not kernel and not glibc */
 #endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/sonet.h b/include/linux/sonet.h
index de8832dd272bd7dd86aa0fa126926401e0165ac0..680f9a31df25653043a41603c4134ff284469b0a 100644
--- a/include/linux/sonet.h
+++ b/include/linux/sonet.h
@@ -1,64 +1,10 @@
 /* sonet.h - SONET/SHD physical layer control */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
 #ifndef LINUX_SONET_H
 #define LINUX_SONET_H
 
-#define __SONET_ITEMS \
-    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
-    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
-    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
-    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
-    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
-    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
-    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
-    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
-    __HANDLE_ITEM(rx_cells);		/* cells received */
-
-struct sonet_stats {
-#define __HANDLE_ITEM(i) int i
-	__SONET_ITEMS
-#undef __HANDLE_ITEM
-} __attribute__ ((packed));
-
-
-#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
-					/* get statistics */
-#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
-					/* ... and zero counters */
-#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
-					/* set error insertion */
-#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
-					/* clear error insertion */
-#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
-					/* query error insertion */
-#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
-					/* set framing mode (SONET/SDH) */
-#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
-					/* get framing mode */
-#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
-  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
-
-#define SONET_INS_SBIP	  1		/* section BIP */
-#define SONET_INS_LBIP	  2		/* line BIP */
-#define SONET_INS_PBIP	  4		/* path BIP */
-#define SONET_INS_FRAME	  8		/* out of frame */
-#define SONET_INS_LOS	 16		/* set line to zero */
-#define SONET_INS_LAIS	 32		/* line alarm indication signal */
-#define SONET_INS_PAIS	 64		/* path alarm indication signal */
-#define SONET_INS_HCS	128		/* insert HCS error */
-
-#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
-#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
-
-#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
-
-
-#ifdef __KERNEL__
 
 #include <linux/atomic.h>
+#include <uapi/linux/sonet.h>
 
 struct k_sonet_stats {
 #define __HANDLE_ITEM(i) atomic_t i
@@ -71,5 +17,3 @@ extern void sonet_subtract_stats(struct k_sonet_stats *from,
     struct sonet_stats *to);
 
 #endif
-
-#endif
diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h
index c0f87da78f8a44b788fd32ebcabf94d4b72e2962..0b7cc265cc0b65e71c1fc1a0d9b7d36bb0422529 100644
--- a/include/linux/sonypi.h
+++ b/include/linux/sonypi.h
@@ -32,117 +32,11 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
 #ifndef _SONYPI_H_
 #define _SONYPI_H_
 
-#include <linux/types.h>
-
-/* events the user application reading /dev/sonypi can use */
-
-#define SONYPI_EVENT_IGNORE			 0
-#define SONYPI_EVENT_JOGDIAL_DOWN		 1
-#define SONYPI_EVENT_JOGDIAL_UP			 2
-#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
-#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
-#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
-#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
-#define SONYPI_EVENT_CAPTURE_PRESSED		 7
-#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
-#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
-#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
-#define SONYPI_EVENT_FNKEY_ESC			11
-#define SONYPI_EVENT_FNKEY_F1			12
-#define SONYPI_EVENT_FNKEY_F2			13
-#define SONYPI_EVENT_FNKEY_F3			14
-#define SONYPI_EVENT_FNKEY_F4			15
-#define SONYPI_EVENT_FNKEY_F5			16
-#define SONYPI_EVENT_FNKEY_F6			17
-#define SONYPI_EVENT_FNKEY_F7			18
-#define SONYPI_EVENT_FNKEY_F8			19
-#define SONYPI_EVENT_FNKEY_F9			20
-#define SONYPI_EVENT_FNKEY_F10			21
-#define SONYPI_EVENT_FNKEY_F11			22
-#define SONYPI_EVENT_FNKEY_F12			23
-#define SONYPI_EVENT_FNKEY_1			24
-#define SONYPI_EVENT_FNKEY_2			25
-#define SONYPI_EVENT_FNKEY_D			26
-#define SONYPI_EVENT_FNKEY_E			27
-#define SONYPI_EVENT_FNKEY_F			28
-#define SONYPI_EVENT_FNKEY_S			29
-#define SONYPI_EVENT_FNKEY_B			30
-#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
-#define SONYPI_EVENT_PKEY_P1			32
-#define SONYPI_EVENT_PKEY_P2			33
-#define SONYPI_EVENT_PKEY_P3			34
-#define SONYPI_EVENT_BACK_PRESSED		35
-#define SONYPI_EVENT_LID_CLOSED			36
-#define SONYPI_EVENT_LID_OPENED			37
-#define SONYPI_EVENT_BLUETOOTH_ON		38
-#define SONYPI_EVENT_BLUETOOTH_OFF		39
-#define SONYPI_EVENT_HELP_PRESSED		40
-#define SONYPI_EVENT_FNKEY_ONLY			41
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
-#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
-#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
-#define SONYPI_EVENT_ZOOM_PRESSED		50
-#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
-#define SONYPI_EVENT_MEYE_FACE			52
-#define SONYPI_EVENT_MEYE_OPPOSITE		53
-#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
-#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
-#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
-#define SONYPI_EVENT_BATTERY_INSERT		57
-#define SONYPI_EVENT_BATTERY_REMOVE		58
-#define SONYPI_EVENT_FNKEY_RELEASED		59
-#define SONYPI_EVENT_WIRELESS_ON		60
-#define SONYPI_EVENT_WIRELESS_OFF		61
-#define SONYPI_EVENT_ZOOM_IN_PRESSED		62
-#define SONYPI_EVENT_ZOOM_OUT_PRESSED		63
-#define SONYPI_EVENT_CD_EJECT_PRESSED		64
-#define SONYPI_EVENT_MODEKEY_PRESSED		65
-#define SONYPI_EVENT_PKEY_P4			66
-#define SONYPI_EVENT_PKEY_P5			67
-#define SONYPI_EVENT_SETTINGKEY_PRESSED		68
-#define SONYPI_EVENT_VOLUME_INC_PRESSED		69
-#define SONYPI_EVENT_VOLUME_DEC_PRESSED		70
-#define SONYPI_EVENT_BRIGHTNESS_PRESSED		71
-#define SONYPI_EVENT_MEDIA_PRESSED		72
-#define SONYPI_EVENT_VENDOR_PRESSED		73
-
-/* get/set brightness */
-#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
-#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
-
-/* get battery full capacity/remaining capacity */
-#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
-#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
-#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
-#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
+#include <uapi/linux/sonypi.h>
 
-/* get battery flags: battery1/battery2/ac adapter present */
-#define SONYPI_BFLAGS_B1	0x01
-#define SONYPI_BFLAGS_B2	0x02
-#define SONYPI_BFLAGS_AC	0x04
-#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
-
-/* get/set bluetooth subsystem state on/off */
-#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
-#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
-
-/* get/set fan state on/off */
-#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
-#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
-
-/* get temperature (C) */
-#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
-
-#ifdef __KERNEL__
 
 /* used only for communication between v4l and sonypi */
 
@@ -166,6 +60,4 @@
 #define SONYPI_COMMAND_GETCAMERAROMVERSION	18	/* obsolete */
 #define SONYPI_COMMAND_GETCAMERAREVISION	19	/* obsolete */
 
-#endif				/* __KERNEL__ */
-
 #endif				/* _SONYPI_H_ */
diff --git a/include/linux/sound.h b/include/linux/sound.h
index fae20ba01fbf8e431359b1080be9afec1ab11d6a..73ded040f1d7c894a1bdd8e56ce69af74b76918b 100644
--- a/include/linux/sound.h
+++ b/include/linux/sound.h
@@ -1,33 +1,8 @@
 #ifndef _LINUX_SOUND_H
 #define _LINUX_SOUND_H
 
-/*
- * Minor numbers for the sound driver.
- */
-
-#include <linux/fs.h>
+#include <uapi/linux/sound.h>
 
-#define SND_DEV_CTL		0	/* Control port /dev/mixer */
-#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
-						synthesizer and MIDI output) */
-#define SND_DEV_MIDIN		2	/* Raw midi access */
-#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
-/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
-#define SND_DEV_UNUSED		6
-#define SND_DEV_AWFM		7	/* Reserved */
-#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
-/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
-/* #define SND_DEV_DMMIDI	9 */
-#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
-#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
-#define SND_DEV_UNKNOWN11	11
-#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
-#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
-#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
-
-#ifdef __KERNEL__
 /*
  *	Sound core interface functions
  */
@@ -43,6 +18,4 @@ extern void unregister_sound_special(int unit);
 extern void unregister_sound_mixer(int unit);
 extern void unregister_sound_midi(int unit);
 extern void unregister_sound_dsp(int unit);
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SOUND_H */
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
index dfcf86f013a9492624ba14874be39380199ed236..96c79cbd79ef93f98efc41f09d90d7934cd77937 100644
--- a/include/linux/soundcard.h
+++ b/include/linux/soundcard.h
@@ -1,5 +1,3 @@
-#ifndef SOUNDCARD_H
-#define SOUNDCARD_H
 /*
  * Copyright by Hannu Savolainen 1993-1997
  *
@@ -23,174 +21,12 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  */
+#ifndef SOUNDCARD_H
+#define SOUNDCARD_H
 
-
-/*
- * OSS interface version. With versions earlier than 3.6 this value is
- * an integer with value less than 361. In versions 3.6 and later
- * it's a six digit hexadecimal value. For example value
- * of 0x030600 represents OSS version 3.6.0.
- * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
- * the currently active driver.
- */
-#define SOUND_VERSION	0x030802
-#define OPEN_SOUND_SYSTEM
-
-/* In Linux we need to be prepared for cross compiling */
-#include <linux/ioctl.h>
-
-/* Endian macros. */
-#ifdef __KERNEL__
 #  include <asm/byteorder.h>
-#else
-#  include <endian.h>
-#endif
-
-/*
- *	Supported card ID numbers (Should be somewhere else?)
- */
-
-#define SNDCARD_ADLIB		1
-#define SNDCARD_SB		2
-#define SNDCARD_PAS		3
-#define SNDCARD_GUS		4
-#define SNDCARD_MPU401		5
-#define SNDCARD_SB16		6
-#define SNDCARD_SB16MIDI	7
-#define SNDCARD_UART6850	8
-#define SNDCARD_GUS16		9
-#define SNDCARD_MSS		10
-#define SNDCARD_PSS     	11
-#define SNDCARD_SSCAPE		12
-#define SNDCARD_PSS_MPU     	13
-#define SNDCARD_PSS_MSS     	14
-#define SNDCARD_SSCAPE_MSS	15
-#define SNDCARD_TRXPRO		16
-#define SNDCARD_TRXPRO_SB	17
-#define SNDCARD_TRXPRO_MPU	18
-#define SNDCARD_MAD16		19
-#define SNDCARD_MAD16_MPU	20
-#define SNDCARD_CS4232		21
-#define SNDCARD_CS4232_MPU	22
-#define SNDCARD_MAUI		23
-#define SNDCARD_PSEUDO_MSS	24
-#define SNDCARD_GUSPNP		25
-#define SNDCARD_UART401		26
-/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
-
-/***********************************
- * IOCTL Commands for /dev/sequencer
- */
-
-#ifndef _SIOWR
-#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
-/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
-#define	SIOCPARM_MASK	IOCPARM_MASK
-#define	SIOC_VOID	IOC_VOID
-#define	SIOC_OUT	IOC_OUT
-#define	SIOC_IN		IOC_IN
-#define	SIOC_INOUT	IOC_INOUT
-#define _SIOC_SIZE	_IOC_SIZE
-#define _SIOC_DIR	_IOC_DIR
-#define _SIOC_NONE	_IOC_NONE
-#define _SIOC_READ	_IOC_READ
-#define _SIOC_WRITE	_IOC_WRITE
-#define	_SIO		_IO
-#define	_SIOR		_IOR
-#define	_SIOW		_IOW
-#define	_SIOWR		_IOWR
-#else
+#include <uapi/linux/soundcard.h>
 
-/* Ioctl's have the command encoded in the lower word,
- * and the size of any in or out parameters in the upper
- * word.  The high 2 bits of the upper word are used
- * to encode the in/out status of the parameter; for now
- * we restrict parameters to at most 8191 bytes.
- */
-/* #define	SIOCTYPE		(0xff<<8) */
-#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
-#define	SIOC_VOID	0x00000000	/* no parameters */
-#define	SIOC_OUT	0x20000000	/* copy out parameters */
-#define	SIOC_IN		0x40000000	/* copy in parameters */
-#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
-/* the 0x20000000 is so we can distinguish new ioctl's from old */
-#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
-#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-/* this should be _SIORW, but stdio got there first */
-#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
-#define _SIOC_DIR(x)	(x & 0xf0000000)
-#define _SIOC_NONE	SIOC_VOID
-#define _SIOC_READ	SIOC_OUT
-#define _SIOC_WRITE	SIOC_IN
-#  endif /* _IOWR */
-#endif  /* !_SIOWR */
-
-#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
-#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
-#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
-#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
-#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
-#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
-#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
-#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
-#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
-#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
-#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
-#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
-#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
-#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
-#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
-#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
-#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
-#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
-#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
-#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
-#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
-#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
-
-typedef struct synth_control
-{
-	int devno;	/* Synthesizer # */
-	char data[4000]; /* Device spesific command/data record */
-}synth_control;
-
-typedef struct remove_sample
-{
-	int devno;	/* Synthesizer # */
-	int bankno;	/* MIDI bank # (0=General MIDI) */
-	int instrno;	/* MIDI instrument number */
-} remove_sample;
-
-typedef struct seq_event_rec {
-		unsigned char arr[8];
-} seq_event_rec;
-
-#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
-#define SNDCTL_TMR_START		_SIO  ('T', 2)
-#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
-#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
-#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
-#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
-#	define TMR_INTERNAL		0x00000001
-#	define TMR_EXTERNAL		0x00000002
-#		define TMR_MODE_MIDI	0x00000010
-#		define TMR_MODE_FSK	0x00000020
-#		define TMR_MODE_CLS	0x00000040
-#		define TMR_MODE_SMPTE	0x00000080
-#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
-#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
-
-/*
- * Some big endian/little endian handling macros
- */
-
-#define _LINUX_PATCHKEY_H_INDIRECT
-#include <linux/patchkey.h>
-#undef _LINUX_PATCHKEY_H_INDIRECT
-
-#if defined(__KERNEL__)
 #  if defined(__BIG_ENDIAN)
 #    define AFMT_S16_NE AFMT_S16_BE
 #  elif defined(__LITTLE_ENDIAN)
@@ -198,1095 +34,4 @@ typedef struct seq_event_rec {
 #  else
 #    error "could not determine byte order"
 #  endif
-#else
-# if defined(__BYTE_ORDER)
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#    define AFMT_S16_NE AFMT_S16_BE
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#    define AFMT_S16_NE AFMT_S16_LE
-#  else
-#    error "could not determine byte order"
-#  endif
-# endif
-#endif
-
-/*
- *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
- *	The following patch_info structure has been designed to support
- *	Gravis UltraSound. It tries to be universal format for uploading
- *	sample based patches but is probably too limited.
- *
- *      (PBD) As Hannu guessed, the GUS structure is too limited for 
- *      the WaveFront, but this is the right place for a constant definition.
- */
-
-struct patch_info {
-		unsigned short key;		/* Use WAVE_PATCH here */
-#define WAVE_PATCH	   _PATCHKEY(0x04)
-#define GUS_PATCH	   WAVE_PATCH
-#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
-
-		short device_no;	/* Synthesizer number */
-		short instr_no;		/* Midi pgm# */
-
-		unsigned int mode;
-/*
- * The least significant byte has the same format than the GUS .PAT
- * files
- */
-#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
-#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
-#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
-#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
-#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
-#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
-#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
-#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
-				/* 	(use the env_rate/env_offs fields). */
-/* Linux specific bits */
-#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
-#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
-#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
-#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
-/* Reserved bits */
-#define WAVE_ROM	0x40000000	/* For future use */
-#define WAVE_MULAW	0x20000000	/* For future use */
-/* Other bits must be zeroed */
-
-		int len;	/* Size of the wave data in bytes */
-		int loop_start, loop_end; /* Byte offsets from the beginning */
-
-/* 
- * The base_freq and base_note fields are used when computing the
- * playback speed for a note. The base_note defines the tone frequency
- * which is heard if the sample is played using the base_freq as the
- * playback speed.
- *
- * The low_note and high_note fields define the minimum and maximum note
- * frequencies for which this sample is valid. It is possible to define
- * more than one samples for an instrument number at the same time. The
- * low_note and high_note fields are used to select the most suitable one.
- *
- * The fields base_note, high_note and low_note should contain
- * the note frequency multiplied by 1000. For example value for the
- * middle A is 440*1000.
- */
-
-		unsigned int base_freq;
-		unsigned int base_note;
-		unsigned int high_note;
-		unsigned int low_note;
-		int panning;	/* -128=left, 127=right */
-		int detuning;
-
-/*	New fields introduced in version 1.99.5	*/
-
-       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
-		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
-		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
-
-	/* 
-	 * The tremolo, vibrato and scale info are not supported yet.
-	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
-	 * WAVE_SCALE
-	 */
-
-		unsigned char	tremolo_sweep;
-		unsigned char	tremolo_rate;
-		unsigned char	tremolo_depth;
-	
-		unsigned char	vibrato_sweep;
-		unsigned char	vibrato_rate;
-		unsigned char	vibrato_depth;
-
-		int		scale_frequency;
-		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
-	
-	        int		volume;
-		int		fractions;
-		int		reserved1;
-	        int		spare[2];
-		char data[1];	/* The waveform data starts here */
-	};
-
-struct sysex_info {
-		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
-#define SYSEX_PATCH	_PATCHKEY(0x05)
-#define MAUI_PATCH	_PATCHKEY(0x06)
-		short device_no;	/* Synthesizer number */
-		int len;	/* Size of the sysex data in bytes */
-		unsigned char data[1];	/* Sysex data starts here */
-	};
-
-/*
- * /dev/sequencer input events.
- *
- * The data written to the /dev/sequencer is a stream of events. Events
- * are records of 4 or 8 bytes. The first byte defines the size. 
- * Any number of events can be written with a write call. There
- * is a set of macros for sending these events. Use these macros if you
- * want to maximize portability of your program.
- *
- * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
- * (All input events are currently 4 bytes long. Be prepared to support
- * 8 byte events also. If you receive any event having first byte >= 128,
- * it's a 8 byte event.
- *
- * The events are documented at the end of this file.
- *
- * Normal events (4 bytes)
- * There is also a 8 byte version of most of the 4 byte events. The
- * 8 byte one is recommended.
- */
-#define SEQ_NOTEOFF		0
-#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
-#define SEQ_NOTEON		1
-#define	SEQ_FMNOTEON		SEQ_NOTEON
-#define SEQ_WAIT		TMR_WAIT_ABS
-#define SEQ_PGMCHANGE		3
-#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
-#define SEQ_SYNCTIMER		TMR_START
-#define SEQ_MIDIPUTC		5
-#define SEQ_DRUMON		6	/*** OBSOLETE ***/
-#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
-#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
-#define SEQ_AFTERTOUCH		9
-#define SEQ_CONTROLLER		10
-
-/*******************************************
- *	Midi controller numbers
- *******************************************
- * Controllers 0 to 31 (0x00 to 0x1f) and
- * 32 to 63 (0x20 to 0x3f) are continuous
- * controllers.
- * In the MIDI 1.0 these controllers are sent using
- * two messages. Controller numbers 0 to 31 are used
- * to send the MSB and the controller numbers 32 to 63
- * are for the LSB. Note that just 7 bits are used in MIDI bytes.
- */
-
-#define	   CTL_BANK_SELECT		0x00
-#define	   CTL_MODWHEEL			0x01
-#define    CTL_BREATH			0x02
-/*		undefined		0x03 */
-#define    CTL_FOOT			0x04
-#define    CTL_PORTAMENTO_TIME		0x05
-#define    CTL_DATA_ENTRY		0x06
-#define    CTL_MAIN_VOLUME		0x07
-#define    CTL_BALANCE			0x08
-/*		undefined		0x09 */
-#define    CTL_PAN			0x0a
-#define    CTL_EXPRESSION		0x0b
-/*		undefined		0x0c */
-/*		undefined		0x0d */
-/*		undefined		0x0e */
-/*		undefined		0x0f */
-#define    CTL_GENERAL_PURPOSE1	0x10
-#define    CTL_GENERAL_PURPOSE2	0x11
-#define    CTL_GENERAL_PURPOSE3	0x12
-#define    CTL_GENERAL_PURPOSE4	0x13
-/*		undefined		0x14 - 0x1f */
-
-/*		undefined		0x20 */
-/* The controller numbers 0x21 to 0x3f are reserved for the */
-/* least significant bytes of the controllers 0x00 to 0x1f. */
-/* These controllers are not recognised by the driver. */
-
-/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
-/* 0=OFF and 127=ON (intermediate values are possible) */
-#define    CTL_DAMPER_PEDAL		0x40
-#define    CTL_SUSTAIN			0x40	/* Alias */
-#define    CTL_HOLD			0x40	/* Alias */
-#define    CTL_PORTAMENTO		0x41
-#define    CTL_SOSTENUTO		0x42
-#define    CTL_SOFT_PEDAL		0x43
-/*		undefined		0x44 */
-#define    CTL_HOLD2			0x45
-/*		undefined		0x46 - 0x4f */
-
-#define    CTL_GENERAL_PURPOSE5	0x50
-#define    CTL_GENERAL_PURPOSE6	0x51
-#define    CTL_GENERAL_PURPOSE7	0x52
-#define    CTL_GENERAL_PURPOSE8	0x53
-/*		undefined		0x54 - 0x5a */
-#define    CTL_EXT_EFF_DEPTH		0x5b
-#define    CTL_TREMOLO_DEPTH		0x5c
-#define    CTL_CHORUS_DEPTH		0x5d
-#define    CTL_DETUNE_DEPTH		0x5e
-#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
-#define    CTL_PHASER_DEPTH		0x5f
-#define    CTL_DATA_INCREMENT		0x60
-#define    CTL_DATA_DECREMENT		0x61
-#define    CTL_NONREG_PARM_NUM_LSB	0x62
-#define    CTL_NONREG_PARM_NUM_MSB	0x63
-#define    CTL_REGIST_PARM_NUM_LSB	0x64
-#define    CTL_REGIST_PARM_NUM_MSB	0x65
-/*		undefined		0x66 - 0x78 */
-/*		reserved		0x79 - 0x7f */
-
-/* Pseudo controllers (not midi compatible) */
-#define    CTRL_PITCH_BENDER		255
-#define    CTRL_PITCH_BENDER_RANGE	254
-#define    CTRL_EXPRESSION		253	/* Obsolete */
-#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
-#define SEQ_BALANCE		11
-#define SEQ_VOLMODE             12
-
-/*
- * Volume mode decides how volumes are used
- */
-
-#define VOL_METHOD_ADAGIO	1
-#define VOL_METHOD_LINEAR	2
-
-/*
- * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
- *	 input events.
- */
-
-/*
- * Event codes 0xf0 to 0xfc are reserved for future extensions.
- */
-
-#define SEQ_FULLSIZE		0xfd	/* Long events */
-/*
- *	SEQ_FULLSIZE events are used for loading patches/samples to the
- *	synthesizer devices. These events are passed directly to the driver
- *	of the associated synthesizer device. There is no limit to the size
- *	of the extended events. These events are not queued but executed
- *	immediately when the write() is called (execution can take several
- *	seconds of time). 
- *
- *	When a SEQ_FULLSIZE message is written to the device, it must
- *	be written using exactly one write() call. Other events cannot
- *	be mixed to the same write.
- *	
- *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
- *	/dev/sequencer. Don't write other data together with the instrument structure
- *	Set the key field of the structure to FM_PATCH. The device field is used to
- *	route the patch to the corresponding device.
- *
- *	For wave table use struct patch_info. Initialize the key field
- *      to WAVE_PATCH.
- */
-#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
-#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
-
-/*
- * Record for FM patches
- */
-
-typedef unsigned char sbi_instr_data[32];
-
-struct sbi_instrument {
-		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
-#define FM_PATCH	_PATCHKEY(0x01)
-#define OPL3_PATCH	_PATCHKEY(0x03)
-		short		device;		/*	Synth# (0-4)	*/
-		int 		channel;	/*	Program# to be initialized 	*/
-		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
-	};
-
-struct synth_info {	/* Read only */
-		char	name[30];
-		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
-		int	synth_type;
-#define SYNTH_TYPE_FM			0
-#define SYNTH_TYPE_SAMPLE		1
-#define SYNTH_TYPE_MIDI			2	/* Midi interface */
-
-		int	synth_subtype;
-#define FM_TYPE_ADLIB			0x00
-#define FM_TYPE_OPL3			0x01
-#define MIDI_TYPE_MPU401		0x401
-
-#define SAMPLE_TYPE_BASIC		0x10
-#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
-#define SAMPLE_TYPE_WAVEFRONT           0x11
-
-		int	perc_mode;	/* No longer supported */
-		int	nr_voices;
-		int	nr_drums;	/* Obsolete field */
-		int	instr_bank_size;
-		unsigned int	capabilities;	
-#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
-#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
-#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
-		int	dummies[19];	/* Reserve space */
-	};
-
-struct sound_timer_info {
-		char name[32];
-		int caps;
-	};
-
-#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
-
-struct midi_info {
-		char		name[30];
-		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
-		unsigned int	capabilities;	/* To be defined later */
-		int		dev_type;
-		int		dummies[18];	/* Reserve space */
-	};
-
-/********************************************
- * ioctl commands for the /dev/midi##
- */
-typedef struct {
-		unsigned char cmd;
-		char nr_args, nr_returns;
-		unsigned char data[30];
-	} mpu_command_rec;
-
-#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
-#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
-#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
-
-/********************************************
- * IOCTL commands for /dev/dsp and /dev/audio
- */
-
-#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
-#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
-#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
-#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
-#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
-#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
-#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
-#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
-#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
-#define SNDCTL_DSP_POST			_SIO  ('P', 8)
-#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
-#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
-
-/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
-#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
-#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
-#	define AFMT_QUERY		0x00000000	/* Return current fmt */
-#	define AFMT_MU_LAW		0x00000001
-#	define AFMT_A_LAW		0x00000002
-#	define AFMT_IMA_ADPCM		0x00000004
-#	define AFMT_U8			0x00000008
-#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
-#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
-#	define AFMT_S8			0x00000040
-#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
-#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
-#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
-#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
-
-/*
- * Buffer status queries.
- */
-typedef struct audio_buf_info {
-			int fragments;	/* # of available fragments (partially usend ones not counted) */
-			int fragstotal;	/* Total # of fragments allocated */
-			int fragsize;	/* Size of a fragment in bytes */
-
-			int bytes;	/* Available space in bytes (includes partially used fragments) */
-			/* Note! 'bytes' could be more than fragments*fragsize */
-		} audio_buf_info;
-
-#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
-#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
-#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
-#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
-#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
-#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
-#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
-#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
-							/* internal buffers which may */
-							/* cause some delays and */
-							/* decrease precision of timing */
-#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
-							/* Sometimes it's a DSP */
-							/* but usually not */
-#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
-#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
-#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
-#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
-
-
-#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
-#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
-#	define PCM_ENABLE_INPUT		0x00000001
-#	define PCM_ENABLE_OUTPUT		0x00000002
-
-typedef struct count_info {
-		int bytes;	/* Total # of bytes processed */
-		int blocks;	/* # of fragment transitions since last time */
-		int ptr;	/* Current DMA pointer value */
-	} count_info;
-
-#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
-#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
-
-typedef struct buffmem_desc {
-		unsigned *buffer;
-		int size;
-	} buffmem_desc;
-#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
-#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
-#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
-#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
-#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
-
-#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
-#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
-#	define DSP_BIND_QUERY		0x00000000
-#	define DSP_BIND_FRONT		0x00000001
-#	define DSP_BIND_SURR		0x00000002
-#	define DSP_BIND_CENTER_LFE	0x00000004
-#	define DSP_BIND_HANDSET		0x00000008
-#	define DSP_BIND_MIC		0x00000010
-#	define DSP_BIND_MODEM1		0x00000020
-#	define DSP_BIND_MODEM2		0x00000040
-#	define DSP_BIND_I2S		0x00000080
-#	define DSP_BIND_SPDIF		0x00000100
-
-#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
-#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
-#	define SPDIF_PRO	0x0001
-#	define SPDIF_N_AUD	0x0002
-#	define SPDIF_COPY	0x0004
-#	define SPDIF_PRE	0x0008
-#	define SPDIF_CC		0x07f0
-#	define SPDIF_L		0x0800
-#	define SPDIF_DRS	0x4000
-#	define SPDIF_V		0x8000
-
-/*
- * Application's profile defines the way how playback underrun situations should be handled.
- * 
- *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
- *	playback buffer whenever an underrun occurs. This consumes some time
- *	prevents looping the existing buffer.
- *	APF_CPUINTENS is intended to be set by CPU intensive applications which
- *	are likely to run out of time occasionally. In this mode the buffer cleanup is
- *	disabled which saves CPU time but also let's the previous buffer content to
- *	be played during the "pause" after the underrun.
- */
-#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
-#define	  APF_NORMAL	0	/* Normal applications */
-#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
-#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
-
-#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
-#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
-#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
-#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
-
-/* Some alias names */
-#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
-#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
-#define SOUND_PCM_POST			SNDCTL_DSP_POST
-#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
-#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
-#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
-#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
-#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
-#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
-#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
-#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
-#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
-#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
-#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
-#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
-#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
-#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
-#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
-#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
-#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
-
-/*
- * ioctl calls to be used in communication with coprocessors and
- * DSP chips.
- */
-
-typedef struct copr_buffer {
-		int command;	/* Set to 0 if not used */
-		int flags;
-#define CPF_NONE		0x0000
-#define CPF_FIRST		0x0001	/* First block */
-#define CPF_LAST		0x0002	/* Last block */
-		int len;
-		int offs;	/* If required by the device (0 if not used) */
-
-		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
-	} copr_buffer;
-
-typedef struct copr_debug_buf {
-		int command;	/* Used internally. Set to 0 */
-		int parm1;
-		int parm2;
-		int flags;	
-		int len;	/* Length of data in bytes */
-	} copr_debug_buf;
-
-typedef struct copr_msg {
-		int len;
-		unsigned char data[4000];
-	} copr_msg;
-
-#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
-#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
-#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
-#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
-#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
-#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
-#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
-#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
-#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
-#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
-
-/*********************************************
- * IOCTL commands for /dev/mixer
- */
-	
-/* 
- * Mixer devices
- *
- * There can be up to 20 different analog mixer channels. The
- * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
- * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
- * the devices supported by the particular mixer.
- */
-
-#define SOUND_MIXER_NRDEVICES	25
-#define SOUND_MIXER_VOLUME	0
-#define SOUND_MIXER_BASS	1
-#define SOUND_MIXER_TREBLE	2
-#define SOUND_MIXER_SYNTH	3
-#define SOUND_MIXER_PCM		4
-#define SOUND_MIXER_SPEAKER	5
-#define SOUND_MIXER_LINE	6
-#define SOUND_MIXER_MIC		7
-#define SOUND_MIXER_CD		8
-#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
-#define SOUND_MIXER_ALTPCM	10
-#define SOUND_MIXER_RECLEV	11	/* Recording level */
-#define SOUND_MIXER_IGAIN	12	/* Input gain */
-#define SOUND_MIXER_OGAIN	13	/* Output gain */
-/* 
- * The AD1848 codec and compatibles have three line level inputs
- * (line, aux1 and aux2). Since each card manufacturer have assigned
- * different meanings to these inputs, it's inpractical to assign
- * specific meanings (line, cd, synth etc.) to them.
- */
-#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
-#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
-#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
-#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
-#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
-#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
-#define SOUND_MIXER_PHONEIN	20	/* Phone input */
-#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
-#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
-#define SOUND_MIXER_RADIO	23	/* Radio in */
-#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
-
-/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
-/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
-#define SOUND_ONOFF_MIN		28
-#define SOUND_ONOFF_MAX		30
-
-/* Note!	Number 31 cannot be used since the sign bit is reserved */
-#define SOUND_MIXER_NONE	31
-
-/*
- * The following unsupported macros are no longer functional.
- * Use SOUND_MIXER_PRIVATE# macros in future.
- */
-#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
-#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
-#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
-
-
-#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
-				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
-				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
-				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
-
-#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
-				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
-				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
-				 "phin", "phout", "video", "radio", "monitor"}
-
-/*	Device bitmask identifiers	*/
-
-#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
-#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
-#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
-#define SOUND_MIXER_CAPS	0xfc
-#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
-#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
-#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
-#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
-
-/*	Device mask bits	*/
-
-#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
-#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
-#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
-#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
-#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
-#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
-#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
-#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
-#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
-#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
-#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
-#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
-#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
-#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
-#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
-#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
-#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
-#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
-#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
-#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
-#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
-#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
-#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
-#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
-#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
-
-/* Obsolete macros */
-#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
-#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
-#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
-
-#define MIXER_READ(dev)		_SIOR('M', dev, int)
-#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
-#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
-#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
-#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
-#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
-#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
-#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
-#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
-#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
-#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
-
-#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
-#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
-#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
-#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
-#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
-#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
-#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
-
-typedef struct mixer_info
-{
-  char id[16];
-  char name[32];
-  int  modify_counter;
-  int fillers[10];
-} mixer_info;
-
-typedef struct _old_mixer_info /* Obsolete */
-{
-  char id[16];
-  char name[32];
-} _old_mixer_info;
-
-#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
-#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
-
-/*
- * A mechanism for accessing "proprietary" mixer features. This method
- * permits passing 128 bytes of arbitrary data between a mixer application
- * and the mixer driver. Interpretation of the record is defined by
- * the particular mixer driver.
- */
-typedef unsigned char mixer_record[128];
-
-#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
-
-/*
- * Two ioctls for special souncard function
- */
-#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
-#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
-
-/*
- * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
- * These features can be used when accessing device specific features.
- */
-#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
-#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
-#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
-#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
-#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
-
-/*
- * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
- * for querying current mixer settings from the driver and for loading
- * default volume settings _prior_ activating the mixer (loading
- * doesn't affect current state of the mixer hardware). These calls
- * are for internal use only.
- */
-
-typedef struct mixer_vol_table {
-  int num;	/* Index to volume table */
-  char name[32];
-  int levels[32];
-} mixer_vol_table;
-
-#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
-#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
-
-/* 
- * An ioctl for identifying the driver version. It will return value
- * of the SOUND_VERSION macro used when compiling the driver.
- * This call was introduced in OSS version 3.6 and it will not work
- * with earlier versions (returns EINVAL).
- */
-#define OSS_GETVERSION			_SIOR ('M', 118, int)
-
-/*
- * Level 2 event types for /dev/sequencer
- */
-
-/*
- * The 4 most significant bits of byte 0 specify the class of
- * the event: 
- *
- *	0x8X = system level events,
- *	0x9X = device/port specific events, event[1] = device/port,
- *		The last 4 bits give the subtype:
- *			0x02	= Channel event (event[3] = chn).
- *			0x01	= note event (event[4] = note).
- *			(0x01 is not used alone but always with bit 0x02).
- *	       event[2] = MIDI message code (0x80=note off etc.)
- *
- */
-
-#define EV_SEQ_LOCAL		0x80
-#define EV_TIMING		0x81
-#define EV_CHN_COMMON		0x92
-#define EV_CHN_VOICE		0x93
-#define EV_SYSEX		0x94
-/*
- * Event types 200 to 220 are reserved for application use.
- * These numbers will not be used by the driver.
- */
-
-/*
- * Events for event type EV_CHN_VOICE
- */
-
-#define MIDI_NOTEOFF		0x80
-#define MIDI_NOTEON		0x90
-#define MIDI_KEY_PRESSURE	0xA0
-
-/*
- * Events for event type EV_CHN_COMMON
- */
-
-#define MIDI_CTL_CHANGE		0xB0
-#define MIDI_PGM_CHANGE		0xC0
-#define MIDI_CHN_PRESSURE	0xD0
-#define MIDI_PITCH_BEND		0xE0
-
-#define MIDI_SYSTEM_PREFIX	0xF0
-
-/*
- * Timer event types
- */
-#define TMR_WAIT_REL		1	/* Time relative to the prev time */
-#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
-#define TMR_STOP		3
-#define TMR_START		4
-#define TMR_CONTINUE		5
-#define TMR_TEMPO		6
-#define TMR_ECHO		8
-#define TMR_CLOCK		9	/* MIDI clock */
-#define TMR_SPP			10	/* Song position pointer */
-#define TMR_TIMESIG		11	/* Time signature */
-
-/*
- *	Local event types
- */
-#define LOCL_STARTAUDIO		1
-
-#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
-/*
- *	Some convenience macros to simplify programming of the
- *	/dev/sequencer interface
- *
- *	This is a legacy interface for applications written against
- *	the OSSlib-3.8 style interface. It is no longer possible
- *	to actually link against OSSlib with this header, but we
- *	still provide these macros for programs using them.
- *
- *	If you want to use OSSlib, it is recommended that you get
- *	the GPL version of OSS-4.x and build against that version
- *	of the header.
- *
- *	We redefine the extern keyword so that make headers_check
- *	does not complain about SEQ_USE_EXTBUF.
- */
-#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
-
-void seqbuf_dump(void);	/* This function must be provided by programs */
-
-#define SEQ_PM_DEFINES int __foo_bar___
-
-#define SEQ_LOAD_GMINSTR(dev, instr)
-#define SEQ_LOAD_GMDRUM(dev, drum)
-
-#define _SEQ_EXTERN extern
-#define SEQ_USE_EXTBUF() \
-		_SEQ_EXTERN unsigned char _seqbuf[]; \
-		_SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
-
-#ifndef USE_SIMPLE_MACROS
-/* Sample seqbuf_dump() implementation:
- *
- *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
- *
- *	int seqfd;		-- The file descriptor for /dev/sequencer.
- *
- *	void
- *	seqbuf_dump ()
- *	{
- *	  if (_seqbufptr)
- *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
- *	      {
- *		perror ("write /dev/sequencer");
- *		exit (-1);
- *	      }
- *	  _seqbufptr = 0;
- *	}
- */
-
-#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
-#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
-#define _SEQ_ADVBUF(len)		_seqbufptr += len
-#define SEQ_DUMPBUF			seqbuf_dump
-#else
-/*
- * This variation of the sequencer macros is used just to format one event
- * using fixed buffer.
- * 
- * The program using the macro library must define the following macros before
- * using this library.
- *
- * #define _seqbuf 		 name of the buffer (unsigned char[]) 
- * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
- *				 size of the event, this macro can be used.
- *				 Otherwise this must be defined as empty.
- * #define _seqbufptr		 Define the name of index variable or 0 if
- *				 not required. 
- */
-#define _SEQ_NEEDBUF(len)	/* empty */
-#endif
-
-#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
-					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
-					_seqbuf[_seqbufptr+2] = (dev);\
-					_seqbuf[_seqbufptr+3] = (mode);\
-					_seqbuf[_seqbufptr+4] = 0;\
-					_seqbuf[_seqbufptr+5] = 0;\
-					_seqbuf[_seqbufptr+6] = 0;\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-
-/*
- * Midi voice messages
- */
-
-#define _CHN_VOICE(dev, event, chn, note, parm) \
-					{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					_seqbuf[_seqbufptr+2] = (event);\
-					_seqbuf[_seqbufptr+3] = (chn);\
-					_seqbuf[_seqbufptr+4] = (note);\
-					_seqbuf[_seqbufptr+5] = (parm);\
-					_seqbuf[_seqbufptr+6] = (0);\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_START_NOTE(dev, chn, note, vol) \
-		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
-
-#define SEQ_STOP_NOTE(dev, chn, note, vol) \
-		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
-
-#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
-		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
-
-/*
- * Midi channel messages
- */
-
-#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
-					{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					_seqbuf[_seqbufptr+2] = (event);\
-					_seqbuf[_seqbufptr+3] = (chn);\
-					_seqbuf[_seqbufptr+4] = (p1);\
-					_seqbuf[_seqbufptr+5] = (p2);\
-					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
-					_SEQ_ADVBUF(8);}
-/*
- * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
- * sending any MIDI bytes but it's absolutely not possible. Trying to do
- * so _will_ cause problems with MPU401 intelligent mode).
- *
- * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
- * sent by calling SEQ_SYSEX() several times (there must be no other events
- * between them). First sysex fragment must have 0xf0 in the first byte
- * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
- * between these sysex start and end markers cannot be larger than 0x7f. Also
- * lengths of each fragments (except the last one) must be 6.
- *
- * Breaking the above rules may work with some MIDI ports but is likely to
- * cause fatal problems with some other devices (such as MPU401).
- */
-#define SEQ_SYSEX(dev, buf, len) \
-					{int ii, ll=(len); \
-					 unsigned char *bufp=buf;\
-					 if (ll>6)ll=6;\
-					_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_SYSEX;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					for(ii=0;ii<ll;ii++)\
-					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
-					for(ii=ll;ii<6;ii++)\
-					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
-		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
-
-#define SEQ_SET_PATCH SEQ_PGM_CHANGE
-#define SEQ_PGM_CHANGE(dev, chn, patch) \
-		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
-
-#define SEQ_CONTROL(dev, chn, controller, value) \
-		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
-
-#define SEQ_BENDER(dev, chn, value) \
-		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
-
-
-#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
-					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
-					_seqbuf[_seqbufptr+2] = (dev);\
-					_seqbuf[_seqbufptr+3] = (voice);\
-					_seqbuf[_seqbufptr+4] = (controller);\
-					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
-					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-/*
- * The following 5 macros are incorrectly implemented and obsolete.
- * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
- */
-#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
-#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
-#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
-#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
-#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
-
-/*
- * Timing and synchronization macros
- */
-
-#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
-				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
-				 	_seqbuf[_seqbufptr+1] = (ev); \
-					_seqbuf[_seqbufptr+2] = 0;\
-					_seqbuf[_seqbufptr+3] = 0;\
-				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
-#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
-#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
-#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
-#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
-#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
-#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
-#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
-#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
-
-/*
- * Local control events
- */
-
-#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
-				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
-				 	_seqbuf[_seqbufptr+1] = (ev); \
-					_seqbuf[_seqbufptr+2] = 0;\
-					_seqbuf[_seqbufptr+3] = 0;\
-				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
-/*
- * Events for the level 1 interface only 
- */
-
-#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
-					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
-					_seqbuf[_seqbufptr+1] = (byte);\
-					_seqbuf[_seqbufptr+2] = (device);\
-					_seqbuf[_seqbufptr+3] = 0;\
-					_SEQ_ADVBUF(4);}
-
-/*
- * Patch loading.
- */
-#define SEQ_WRPATCH(patchx, len) \
-		{if (_seqbufptr) SEQ_DUMPBUF();\
-		 if (write(seqfd, (char*)(patchx), len)==-1) \
-		    perror("Write patch: /dev/sequencer");}
-#define SEQ_WRPATCH2(patchx, len) \
-		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
-
-#endif
 #endif
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 46132409a3f73b3d57c2c150fec9b46039150b96..075cb0c7eb2ade30e936d8a5e961732ea1faf759 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -1,52 +1,10 @@
 #ifndef _LINUX_STAT_H
 #define _LINUX_STAT_H
 
-#ifdef __KERNEL__
 
 #include <asm/stat.h>
+#include <uapi/linux/stat.h>
 
-#endif
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#define S_IFMT  00170000
-#define S_IFSOCK 0140000
-#define S_IFLNK	 0120000
-#define S_IFREG  0100000
-#define S_IFBLK  0060000
-#define S_IFDIR  0040000
-#define S_IFCHR  0020000
-#define S_IFIFO  0010000
-#define S_ISUID  0004000
-#define S_ISGID  0002000
-#define S_ISVTX  0001000
-
-#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
-#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
-#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
-#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
-#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
-#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
-#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
-
-#define S_IRWXU 00700
-#define S_IRUSR 00400
-#define S_IWUSR 00200
-#define S_IXUSR 00100
-
-#define S_IRWXG 00070
-#define S_IRGRP 00040
-#define S_IWGRP 00020
-#define S_IXGRP 00010
-
-#define S_IRWXO 00007
-#define S_IROTH 00004
-#define S_IWOTH 00002
-#define S_IXOTH 00001
-
-#endif
-
-#ifdef __KERNEL__
 #define S_IRWXUGO	(S_IRWXU|S_IRWXG|S_IRWXO)
 #define S_IALLUGO	(S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
 #define S_IRUGO		(S_IRUSR|S_IRGRP|S_IROTH)
@@ -77,5 +35,3 @@ struct kstat {
 };
 
 #endif
-
-#endif
diff --git a/include/linux/stddef.h b/include/linux/stddef.h
index 1747b6787b9e90375827a9af75148bf420caf386..f4aec0e75c3a268cebeecd2dcdc43fc68126a27a 100644
--- a/include/linux/stddef.h
+++ b/include/linux/stddef.h
@@ -1,9 +1,8 @@
 #ifndef _LINUX_STDDEF_H
 #define _LINUX_STDDEF_H
 
-#include <linux/compiler.h>
+#include <uapi/linux/stddef.h>
 
-#ifdef __KERNEL__
 
 #undef NULL
 #define NULL ((void *)0)
@@ -19,6 +18,4 @@ enum {
 #else
 #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
 #endif
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/string.h b/include/linux/string.h
index b9178812d9df5f703b2e2126f1a4df2669f083cc..630125818ca8177c5a90a8600e20cfc053e9fca6 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -1,16 +1,12 @@
 #ifndef _LINUX_STRING_H_
 #define _LINUX_STRING_H_
 
-/* We don't want strings.h stuff being used by user stuff by accident */
-
-#ifndef __KERNEL__
-#include <string.h>
-#else
 
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>	/* for size_t */
 #include <linux/stddef.h>	/* for NULL */
 #include <stdarg.h>
+#include <uapi/linux/string.h>
 
 extern char *strndup_user(const char __user *, long);
 extern void *memdup_user(const void __user *, size_t);
@@ -147,5 +143,4 @@ static inline bool strstarts(const char *str, const char *prefix)
 
 extern size_t memweight(const void *ptr, size_t bytes);
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/swab.h b/include/linux/swab.h
index ea0c02fd5163c2b865d2041cc0a2f5e43e7c7743..9ad3c60f6cae7f24e4ca4aa9a3e842fd22cbc4ae 100644
--- a/include/linux/swab.h
+++ b/include/linux/swab.h
@@ -1,284 +1,8 @@
 #ifndef _LINUX_SWAB_H
 #define _LINUX_SWAB_H
 
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <asm/swab.h>
+#include <uapi/linux/swab.h>
 
-/*
- * casts are necessary for constants, because we never know how for sure
- * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
- */
-#define ___constant_swab16(x) ((__u16)(				\
-	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
-	(((__u16)(x) & (__u16)0xff00U) >> 8)))
-
-#define ___constant_swab32(x) ((__u32)(				\
-	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
-	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
-	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
-	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
-
-#define ___constant_swab64(x) ((__u64)(				\
-	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
-	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
-	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
-	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
-	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
-	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
-	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
-	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
-
-#define ___constant_swahw32(x) ((__u32)(			\
-	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
-	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
-
-#define ___constant_swahb32(x) ((__u32)(			\
-	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
-	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
-
-/*
- * Implement the following as inlines, but define the interface using
- * macros to allow constant folding when possible:
- * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
- */
-
-static inline __attribute_const__ __u16 __fswab16(__u16 val)
-{
-#ifdef __arch_swab16
-	return __arch_swab16(val);
-#else
-	return ___constant_swab16(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswab32(__u32 val)
-{
-#ifdef __arch_swab32
-	return __arch_swab32(val);
-#else
-	return ___constant_swab32(val);
-#endif
-}
-
-static inline __attribute_const__ __u64 __fswab64(__u64 val)
-{
-#ifdef __arch_swab64
-	return __arch_swab64(val);
-#elif defined(__SWAB_64_THRU_32__)
-	__u32 h = val >> 32;
-	__u32 l = val & ((1ULL << 32) - 1);
-	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
-#else
-	return ___constant_swab64(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahw32(__u32 val)
-{
-#ifdef __arch_swahw32
-	return __arch_swahw32(val);
-#else
-	return ___constant_swahw32(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahb32(__u32 val)
-{
-#ifdef __arch_swahb32
-	return __arch_swahb32(val);
-#else
-	return ___constant_swahb32(val);
-#endif
-}
-
-/**
- * __swab16 - return a byteswapped 16-bit value
- * @x: value to byteswap
- */
-#define __swab16(x)				\
-	(__builtin_constant_p((__u16)(x)) ?	\
-	___constant_swab16(x) :			\
-	__fswab16(x))
-
-/**
- * __swab32 - return a byteswapped 32-bit value
- * @x: value to byteswap
- */
-#define __swab32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swab32(x) :			\
-	__fswab32(x))
-
-/**
- * __swab64 - return a byteswapped 64-bit value
- * @x: value to byteswap
- */
-#define __swab64(x)				\
-	(__builtin_constant_p((__u64)(x)) ?	\
-	___constant_swab64(x) :			\
-	__fswab64(x))
-
-/**
- * __swahw32 - return a word-swapped 32-bit value
- * @x: value to wordswap
- *
- * __swahw32(0x12340000) is 0x00001234
- */
-#define __swahw32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swahw32(x) :		\
-	__fswahw32(x))
-
-/**
- * __swahb32 - return a high and low byte-swapped 32-bit value
- * @x: value to byteswap
- *
- * __swahb32(0x12345678) is 0x34127856
- */
-#define __swahb32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swahb32(x) :		\
-	__fswahb32(x))
-
-/**
- * __swab16p - return a byteswapped 16-bit value from a pointer
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline __u16 __swab16p(const __u16 *p)
-{
-#ifdef __arch_swab16p
-	return __arch_swab16p(p);
-#else
-	return __swab16(*p);
-#endif
-}
-
-/**
- * __swab32p - return a byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline __u32 __swab32p(const __u32 *p)
-{
-#ifdef __arch_swab32p
-	return __arch_swab32p(p);
-#else
-	return __swab32(*p);
-#endif
-}
-
-/**
- * __swab64p - return a byteswapped 64-bit value from a pointer
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline __u64 __swab64p(const __u64 *p)
-{
-#ifdef __arch_swab64p
-	return __arch_swab64p(p);
-#else
-	return __swab64(*p);
-#endif
-}
-
-/**
- * __swahw32p - return a wordswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping.
- */
-static inline __u32 __swahw32p(const __u32 *p)
-{
-#ifdef __arch_swahw32p
-	return __arch_swahw32p(p);
-#else
-	return __swahw32(*p);
-#endif
-}
-
-/**
- * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high/low byteswapping.
- */
-static inline __u32 __swahb32p(const __u32 *p)
-{
-#ifdef __arch_swahb32p
-	return __arch_swahb32p(p);
-#else
-	return __swahb32(*p);
-#endif
-}
-
-/**
- * __swab16s - byteswap a 16-bit value in-place
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline void __swab16s(__u16 *p)
-{
-#ifdef __arch_swab16s
-	__arch_swab16s(p);
-#else
-	*p = __swab16p(p);
-#endif
-}
-/**
- * __swab32s - byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline void __swab32s(__u32 *p)
-{
-#ifdef __arch_swab32s
-	__arch_swab32s(p);
-#else
-	*p = __swab32p(p);
-#endif
-}
-
-/**
- * __swab64s - byteswap a 64-bit value in-place
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline void __swab64s(__u64 *p)
-{
-#ifdef __arch_swab64s
-	__arch_swab64s(p);
-#else
-	*p = __swab64p(p);
-#endif
-}
-
-/**
- * __swahw32s - wordswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping
- */
-static inline void __swahw32s(__u32 *p)
-{
-#ifdef __arch_swahw32s
-	__arch_swahw32s(p);
-#else
-	*p = __swahw32p(p);
-#endif
-}
-
-/**
- * __swahb32s - high and low byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high and low byte swapping
- */
-static inline void __swahb32s(__u32 *p)
-{
-#ifdef __arch_swahb32s
-	__arch_swahb32s(p);
-#else
-	*p = __swahb32p(p);
-#endif
-}
-
-#ifdef __KERNEL__
 # define swab16 __swab16
 # define swab32 __swab32
 # define swab64 __swab64
@@ -294,6 +18,4 @@ static inline void __swahb32s(__u32 *p)
 # define swab64s __swab64s
 # define swahw32s __swahw32s
 # define swahb32s __swahb32s
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SWAB_H */
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index 2e7d81c4e5adcf54525d409b01a04644a7e2b35d..f1405b1c71ba15f77f745a3f7c786442b6761ae7 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -8,295 +8,11 @@
  * Redistribution of this file is permitted under
  * the terms of the GNU Public License (GPL)
  */
-
 #ifndef _SYNCLINK_H_
 #define _SYNCLINK_H_
-#define SYNCLINK_H_VERSION 3.6
-
-#include <linux/types.h>
-
-#define BIT0	0x0001
-#define BIT1	0x0002
-#define BIT2	0x0004
-#define BIT3	0x0008
-#define BIT4	0x0010
-#define BIT5	0x0020
-#define BIT6	0x0040
-#define BIT7	0x0080
-#define BIT8	0x0100
-#define BIT9	0x0200
-#define BIT10	0x0400
-#define BIT11	0x0800
-#define BIT12	0x1000
-#define BIT13	0x2000
-#define BIT14	0x4000
-#define BIT15	0x8000
-#define BIT16	0x00010000
-#define BIT17	0x00020000
-#define BIT18	0x00040000
-#define BIT19	0x00080000
-#define BIT20	0x00100000
-#define BIT21	0x00200000
-#define BIT22	0x00400000
-#define BIT23	0x00800000
-#define BIT24	0x01000000
-#define BIT25	0x02000000
-#define BIT26	0x04000000
-#define BIT27	0x08000000
-#define BIT28	0x10000000
-#define BIT29	0x20000000
-#define BIT30	0x40000000
-#define BIT31	0x80000000
-
-
-#define HDLC_MAX_FRAME_SIZE	65535
-#define MAX_ASYNC_TRANSMIT	4096
-#define MAX_ASYNC_BUFFER_SIZE	4096
-
-#define ASYNC_PARITY_NONE		0
-#define ASYNC_PARITY_EVEN		1
-#define ASYNC_PARITY_ODD		2
-#define ASYNC_PARITY_SPACE		3
-
-#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
-#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
-#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
-#define HDLC_FLAG_UNDERRUN_CRC		0x0004
-#define HDLC_FLAG_SHARE_ZERO		0x0010
-#define HDLC_FLAG_AUTO_CTS		0x0020
-#define HDLC_FLAG_AUTO_DCD		0x0040
-#define HDLC_FLAG_AUTO_RTS		0x0080
-#define HDLC_FLAG_RXC_DPLL		0x0100
-#define HDLC_FLAG_RXC_BRG		0x0200
-#define HDLC_FLAG_RXC_TXCPIN		0x8000
-#define HDLC_FLAG_RXC_RXCPIN		0x0000
-#define HDLC_FLAG_TXC_DPLL		0x0400
-#define HDLC_FLAG_TXC_BRG		0x0800
-#define HDLC_FLAG_TXC_TXCPIN		0x0000
-#define HDLC_FLAG_TXC_RXCPIN		0x0008
-#define HDLC_FLAG_DPLL_DIV8		0x1000
-#define HDLC_FLAG_DPLL_DIV16		0x2000
-#define HDLC_FLAG_DPLL_DIV32		0x0000
-#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
-
-#define HDLC_CRC_NONE			0
-#define HDLC_CRC_16_CCITT		1
-#define HDLC_CRC_32_CCITT		2
-#define HDLC_CRC_MASK			0x00ff
-#define HDLC_CRC_RETURN_EX		0x8000
-
-#define RX_OK				0
-#define RX_CRC_ERROR			1
-
-#define HDLC_TXIDLE_FLAGS		0
-#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
-#define HDLC_TXIDLE_ZEROS		2
-#define HDLC_TXIDLE_ONES		3
-#define HDLC_TXIDLE_ALT_MARK_SPACE	4
-#define HDLC_TXIDLE_SPACE		5
-#define HDLC_TXIDLE_MARK		6
-#define HDLC_TXIDLE_CUSTOM_8            0x10000000
-#define HDLC_TXIDLE_CUSTOM_16           0x20000000
-
-#define HDLC_ENCODING_NRZ			0
-#define HDLC_ENCODING_NRZB			1
-#define HDLC_ENCODING_NRZI_MARK			2
-#define HDLC_ENCODING_NRZI_SPACE		3
-#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
-#define HDLC_ENCODING_BIPHASE_MARK		4
-#define HDLC_ENCODING_BIPHASE_SPACE		5
-#define HDLC_ENCODING_BIPHASE_LEVEL		6
-#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
-
-#define HDLC_PREAMBLE_LENGTH_8BITS	0
-#define HDLC_PREAMBLE_LENGTH_16BITS	1
-#define HDLC_PREAMBLE_LENGTH_32BITS	2
-#define HDLC_PREAMBLE_LENGTH_64BITS	3
-
-#define HDLC_PREAMBLE_PATTERN_NONE	0
-#define HDLC_PREAMBLE_PATTERN_ZEROS	1
-#define HDLC_PREAMBLE_PATTERN_FLAGS	2
-#define HDLC_PREAMBLE_PATTERN_10	3
-#define HDLC_PREAMBLE_PATTERN_01	4
-#define HDLC_PREAMBLE_PATTERN_ONES	5
-
-#define MGSL_MODE_ASYNC		1
-#define MGSL_MODE_HDLC		2
-#define MGSL_MODE_MONOSYNC	3
-#define MGSL_MODE_BISYNC	4
-#define MGSL_MODE_RAW		6
-#define MGSL_MODE_BASE_CLOCK    7
-#define MGSL_MODE_XSYNC         8
-
-#define MGSL_BUS_TYPE_ISA	1
-#define MGSL_BUS_TYPE_EISA	2
-#define MGSL_BUS_TYPE_PCI	5
-
-#define MGSL_INTERFACE_MASK     0xf
-#define MGSL_INTERFACE_DISABLE  0
-#define MGSL_INTERFACE_RS232    1
-#define MGSL_INTERFACE_V35      2
-#define MGSL_INTERFACE_RS422    3
-#define MGSL_INTERFACE_RTS_EN   0x10
-#define MGSL_INTERFACE_LL       0x20
-#define MGSL_INTERFACE_RL       0x40
-#define MGSL_INTERFACE_MSB_FIRST 0x80
-
-typedef struct _MGSL_PARAMS
-{
-	/* Common */
-
-	unsigned long	mode;		/* Asynchronous or HDLC */
-	unsigned char	loopback;	/* internal loopback mode */
-
-	/* HDLC Only */
-
-	unsigned short	flags;
-	unsigned char	encoding;	/* NRZ, NRZI, etc. */
-	unsigned long	clock_speed;	/* external clock speed in bits per second */
-	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
-	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
-	unsigned char	preamble_length;
-	unsigned char	preamble;
 
-	/* Async Only */
+#include <uapi/linux/synclink.h>
 
-	unsigned long	data_rate;	/* bits per second */
-	unsigned char	data_bits;	/* 7 or 8 data bits */
-	unsigned char	stop_bits;	/* 1 or 2 stop bits */
-	unsigned char	parity;		/* none, even, or odd */
-
-} MGSL_PARAMS, *PMGSL_PARAMS;
-
-#define MICROGATE_VENDOR_ID 0x13c0
-#define SYNCLINK_DEVICE_ID 0x0010
-#define MGSCC_DEVICE_ID 0x0020
-#define SYNCLINK_SCA_DEVICE_ID 0x0030
-#define SYNCLINK_GT_DEVICE_ID 0x0070
-#define SYNCLINK_GT4_DEVICE_ID 0x0080
-#define SYNCLINK_AC_DEVICE_ID  0x0090
-#define SYNCLINK_GT2_DEVICE_ID 0x00A0
-#define MGSL_MAX_SERIAL_NUMBER 30
-
-/*
-** device diagnostics status
-*/
-
-#define DiagStatus_OK				0
-#define DiagStatus_AddressFailure		1
-#define DiagStatus_AddressConflict		2
-#define DiagStatus_IrqFailure			3
-#define DiagStatus_IrqConflict			4
-#define DiagStatus_DmaFailure			5
-#define DiagStatus_DmaConflict			6
-#define DiagStatus_PciAdapterNotFound		7
-#define DiagStatus_CantAssignPciResources	8
-#define DiagStatus_CantAssignPciMemAddr		9
-#define DiagStatus_CantAssignPciIoAddr		10
-#define DiagStatus_CantAssignPciIrq		11
-#define DiagStatus_MemoryError			12
-
-#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
-#define SerialSignal_TXD            0x02     /* Transmit Data */
-#define SerialSignal_RI             0x04     /* Ring Indicator */
-#define SerialSignal_RXD            0x08     /* Receive Data */
-#define SerialSignal_CTS            0x10     /* Clear to Send */
-#define SerialSignal_RTS            0x20     /* Request to Send */
-#define SerialSignal_DSR            0x40     /* Data Set Ready */
-#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
-
-
-/*
- * Counters of the input lines (CTS, DSR, RI, CD) interrupts
- */
-struct mgsl_icount {
-	__u32	cts, dsr, rng, dcd, tx, rx;
-	__u32	frame, parity, overrun, brk;
-	__u32	buf_overrun;
-	__u32	txok;
-	__u32	txunder;
-	__u32	txabort;
-	__u32	txtimeout;
-	__u32	rxshort;
-	__u32	rxlong;
-	__u32	rxabort;
-	__u32	rxover;
-	__u32	rxcrc;
-	__u32	rxok;
-	__u32	exithunt;
-	__u32	rxidle;
-};
-
-struct gpio_desc {
-	__u32 state;
-	__u32 smask;
-	__u32 dir;
-	__u32 dmask;
-};
-
-#define DEBUG_LEVEL_DATA	1
-#define DEBUG_LEVEL_ERROR 	2
-#define DEBUG_LEVEL_INFO  	3
-#define DEBUG_LEVEL_BH    	4
-#define DEBUG_LEVEL_ISR		5
-
-/*
-** Event bit flags for use with MgslWaitEvent
-*/
-
-#define MgslEvent_DsrActive	0x0001
-#define MgslEvent_DsrInactive	0x0002
-#define MgslEvent_Dsr		0x0003
-#define MgslEvent_CtsActive	0x0004
-#define MgslEvent_CtsInactive	0x0008
-#define MgslEvent_Cts		0x000c
-#define MgslEvent_DcdActive	0x0010
-#define MgslEvent_DcdInactive	0x0020
-#define MgslEvent_Dcd		0x0030
-#define MgslEvent_RiActive	0x0040
-#define MgslEvent_RiInactive	0x0080
-#define MgslEvent_Ri		0x00c0
-#define MgslEvent_ExitHuntMode	0x0100
-#define MgslEvent_IdleReceived	0x0200
-
-/* Private IOCTL codes:
- *
- * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
- * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
- * MGSL_IOCSTXIDLE	set current transmit idle mode
- * MGSL_IOCGTXIDLE	get current transmit idle mode
- * MGSL_IOCTXENABLE	enable or disable transmitter
- * MGSL_IOCRXENABLE	enable or disable receiver
- * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
- * MGSL_IOCGSTATS	return current statistics
- * MGSL_IOCWAITEVENT	wait for specified event to occur
- * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
- * MGSL_IOCSIF          set the serial interface type
- * MGSL_IOCGIF          get the serial interface type
- */
-#define MGSL_MAGIC_IOC	'm'
-#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
-#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
-#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
-#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
-#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
-#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
-#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
-#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
-#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
-#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
-#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
-#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
-#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
-#define MGSL_IOCSGPIO		_IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
-#define MGSL_IOCGGPIO		_IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
-#define MGSL_IOCWAITGPIO	_IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
-#define MGSL_IOCSXSYNC		_IO(MGSL_MAGIC_IOC, 19)
-#define MGSL_IOCGXSYNC		_IO(MGSL_MAGIC_IOC, 20)
-#define MGSL_IOCSXCTRL		_IO(MGSL_MAGIC_IOC, 21)
-#define MGSL_IOCGXCTRL		_IO(MGSL_MAGIC_IOC, 22)
-
-#ifdef __KERNEL__
 /* provide 32 bit ioctl compatibility on 64 bit systems */
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
@@ -318,6 +34,4 @@ struct MGSL_PARAMS32 {
 #define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32)
 #define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32)
 #endif
-#endif
-
 #endif /* _SYNCLINK_H_ */
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index c34b4c82b0dcd6f60937cf6507da1b9988fd9d6f..cd844a6a8d5f9f766503f91d229694918cbe14fc 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -18,921 +18,14 @@
  ****************************************************************
  ****************************************************************
  */
-
 #ifndef _LINUX_SYSCTL_H
 #define _LINUX_SYSCTL_H
 
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-struct completion;
-
-#define CTL_MAXNAME 10		/* how many path components do we allow in a
-				   call to sysctl?   In other words, what is
-				   the largest acceptable value for the nlen
-				   member of a struct __sysctl_args to have? */
-
-struct __sysctl_args {
-	int __user *name;
-	int nlen;
-	void __user *oldval;
-	size_t __user *oldlenp;
-	void __user *newval;
-	size_t newlen;
-	unsigned long __unused[4];
-};
-
-/* Define sysctl names first */
-
-/* Top-level names: */
-
-enum
-{
-	CTL_KERN=1,		/* General kernel info and control */
-	CTL_VM=2,		/* VM management */
-	CTL_NET=3,		/* Networking */
-	CTL_PROC=4,		/* removal breaks strace(1) compilation */
-	CTL_FS=5,		/* Filesystems */
-	CTL_DEBUG=6,		/* Debugging */
-	CTL_DEV=7,		/* Devices */
-	CTL_BUS=8,		/* Busses */
-	CTL_ABI=9,		/* Binary emulation */
-	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
-	CTL_ARLAN=254,		/* arlan wireless driver */
-	CTL_S390DBF=5677,	/* s390 debug */
-	CTL_SUNRPC=7249,	/* sunrpc debug */
-	CTL_PM=9899,		/* frv power management */
-	CTL_FRV=9898,		/* frv specific sysctls */
-};
-
-/* CTL_BUS names: */
-enum
-{
-	CTL_BUS_ISA=1		/* ISA */
-};
-
-/* /proc/sys/fs/inotify/ */
-enum
-{
-	INOTIFY_MAX_USER_INSTANCES=1,	/* max instances per user */
-	INOTIFY_MAX_USER_WATCHES=2,	/* max watches per user */
-	INOTIFY_MAX_QUEUED_EVENTS=3	/* max queued events per instance */
-};
-
-/* CTL_KERN names: */
-enum
-{
-	KERN_OSTYPE=1,		/* string: system version */
-	KERN_OSRELEASE=2,	/* string: system release */
-	KERN_OSREV=3,		/* int: system revision */
-	KERN_VERSION=4,		/* string: compile time info */
-	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
-	KERN_PROF=6,		/* table: profiling information */
-	KERN_NODENAME=7,	/* string: hostname */
-	KERN_DOMAINNAME=8,	/* string: domainname */
-
-	KERN_PANIC=15,		/* int: panic timeout */
-	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
-
-	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
-	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
-	KERN_PRINTK=23,		/* struct: control printk logging parameters */
-	KERN_NAMETRANS=24,	/* Name translation */
-	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
-	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
-	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
-	KERN_MODPROBE=28,	/* string: modprobe path */
-	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
-	KERN_ACCT=30,		/* BSD process accounting parameters */
-	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
-
-	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
-	KERN_RTSIGMAX=33,	/* Max queuable */
-	
-	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
-	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
-	KERN_MSGMNB=36,         /* int: Maximum message queue size */
-	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
-	KERN_SYSRQ=38,		/* int: Sysreq enable */
-	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
- 	KERN_RANDOM=40,		/* Random driver */
- 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
- 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
- 	KERN_SEM=43,		/* struct: sysv semaphore limits */
- 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
- 	KERN_SHMMNI=45,		/* int: shm array identifiers */
-	KERN_OVERFLOWUID=46,	/* int: overflow UID */
-	KERN_OVERFLOWGID=47,	/* int: overflow GID */
-	KERN_SHMPATH=48,	/* string: path to shm fs */
-	KERN_HOTPLUG=49,	/* string: path to uevent helper (deprecated) */
-	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
-	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
-	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
-	KERN_TAINTED=53,	/* int: various kernel tainted flags */
-	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
-	KERN_PIDMAX=55,		/* int: PID # limit */
-  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
-	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
-	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
-	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
-	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
-	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
-	KERN_PTY=62,		/* dir: pty driver */
-	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
-	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
-	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
-	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
-	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
-	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
-	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
-	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
-	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
-	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
-	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
-	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
-	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
-	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
-};
-
-
-
-/* CTL_VM names: */
-enum
-{
-	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
-	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
-	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
-	VM_UNUSED4=4,		/* Spare */
-	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
-	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
-	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
-	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
-	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
-	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
-	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
-	VM_DIRTY_RATIO=12,	/* dirty_ratio */
-	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
-	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
-	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
-	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
-	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
-	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
-	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
-	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
-	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
-	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
-	VM_LAPTOP_MODE=23,	/* vm laptop mode */
-	VM_BLOCK_DUMP=24,	/* block dump mode */
-	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
-	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
-	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
-	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
-	VM_DROP_PAGECACHE=29,	/* int: nuke lots of pagecache */
-	VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
-	VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
-	VM_MIN_UNMAPPED=32,	/* Set min percent of unmapped pages */
-	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
-	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
-	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
-};
-
-
-/* CTL_NET names: */
-enum
-{
-	NET_CORE=1,
-	NET_ETHER=2,
-	NET_802=3,
-	NET_UNIX=4,
-	NET_IPV4=5,
-	NET_IPX=6,
-	NET_ATALK=7,
-	NET_NETROM=8,
-	NET_AX25=9,
-	NET_BRIDGE=10,
-	NET_ROSE=11,
-	NET_IPV6=12,
-	NET_X25=13,
-	NET_TR=14,
-	NET_DECNET=15,
-	NET_ECONET=16,
-	NET_SCTP=17,
-	NET_LLC=18,
-	NET_NETFILTER=19,
-	NET_DCCP=20,
-	NET_IRDA=412,
-};
-
-/* /proc/sys/kernel/random */
-enum
-{
-	RANDOM_POOLSIZE=1,
-	RANDOM_ENTROPY_COUNT=2,
-	RANDOM_READ_THRESH=3,
-	RANDOM_WRITE_THRESH=4,
-	RANDOM_BOOT_ID=5,
-	RANDOM_UUID=6
-};
-
-/* /proc/sys/kernel/pty */
-enum
-{
-	PTY_MAX=1,
-	PTY_NR=2
-};
-
-/* /proc/sys/bus/isa */
-enum
-{
-	BUS_ISA_MEM_BASE=1,
-	BUS_ISA_PORT_BASE=2,
-	BUS_ISA_PORT_SHIFT=3
-};
-
-/* /proc/sys/net/core */
-enum
-{
-	NET_CORE_WMEM_MAX=1,
-	NET_CORE_RMEM_MAX=2,
-	NET_CORE_WMEM_DEFAULT=3,
-	NET_CORE_RMEM_DEFAULT=4,
-/* was	NET_CORE_DESTROY_DELAY */
-	NET_CORE_MAX_BACKLOG=6,
-	NET_CORE_FASTROUTE=7,
-	NET_CORE_MSG_COST=8,
-	NET_CORE_MSG_BURST=9,
-	NET_CORE_OPTMEM_MAX=10,
-	NET_CORE_HOT_LIST_LENGTH=11,
-	NET_CORE_DIVERT_VERSION=12,
-	NET_CORE_NO_CONG_THRESH=13,
-	NET_CORE_NO_CONG=14,
-	NET_CORE_LO_CONG=15,
-	NET_CORE_MOD_CONG=16,
-	NET_CORE_DEV_WEIGHT=17,
-	NET_CORE_SOMAXCONN=18,
-	NET_CORE_BUDGET=19,
-	NET_CORE_AEVENT_ETIME=20,
-	NET_CORE_AEVENT_RSEQTH=21,
-	NET_CORE_WARNINGS=22,
-};
-
-/* /proc/sys/net/ethernet */
-
-/* /proc/sys/net/802 */
-
-/* /proc/sys/net/unix */
-
-enum
-{
-	NET_UNIX_DESTROY_DELAY=1,
-	NET_UNIX_DELETE_DELAY=2,
-	NET_UNIX_MAX_DGRAM_QLEN=3,
-};
-
-/* /proc/sys/net/netfilter */
-enum
-{
-	NET_NF_CONNTRACK_MAX=1,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
-	NET_NF_CONNTRACK_UDP_TIMEOUT=10,
-	NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
-	NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
-	NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
-	NET_NF_CONNTRACK_BUCKETS=14,
-	NET_NF_CONNTRACK_LOG_INVALID=15,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
-	NET_NF_CONNTRACK_TCP_LOOSE=17,
-	NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
-	NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
-	NET_NF_CONNTRACK_COUNT=27,
-	NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
-	NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
-	NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
-	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
-	NET_NF_CONNTRACK_CHECKSUM=32,
-};
-
-/* /proc/sys/net/ipv4 */
-enum
-{
-	/* v2.0 compatibile variables */
-	NET_IPV4_FORWARD=8,
-	NET_IPV4_DYNADDR=9,
-
-	NET_IPV4_CONF=16,
-	NET_IPV4_NEIGH=17,
-	NET_IPV4_ROUTE=18,
-	NET_IPV4_FIB_HASH=19,
-	NET_IPV4_NETFILTER=20,
-
-	NET_IPV4_TCP_TIMESTAMPS=33,
-	NET_IPV4_TCP_WINDOW_SCALING=34,
-	NET_IPV4_TCP_SACK=35,
-	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
-	NET_IPV4_DEFAULT_TTL=37,
-	NET_IPV4_AUTOCONFIG=38,
-	NET_IPV4_NO_PMTU_DISC=39,
-	NET_IPV4_TCP_SYN_RETRIES=40,
-	NET_IPV4_IPFRAG_HIGH_THRESH=41,
-	NET_IPV4_IPFRAG_LOW_THRESH=42,
-	NET_IPV4_IPFRAG_TIME=43,
-	NET_IPV4_TCP_MAX_KA_PROBES=44,
-	NET_IPV4_TCP_KEEPALIVE_TIME=45,
-	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
-	NET_IPV4_TCP_RETRIES1=47,
-	NET_IPV4_TCP_RETRIES2=48,
-	NET_IPV4_TCP_FIN_TIMEOUT=49,
-	NET_IPV4_IP_MASQ_DEBUG=50,
-	NET_TCP_SYNCOOKIES=51,
-	NET_TCP_STDURG=52,
-	NET_TCP_RFC1337=53,
-	NET_TCP_SYN_TAILDROP=54,
-	NET_TCP_MAX_SYN_BACKLOG=55,
-	NET_IPV4_LOCAL_PORT_RANGE=56,
-	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
-	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
-	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
-	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
-	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
-	NET_IPV4_ICMP_PARAMPROB_RATE=62,
-	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
-	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
-	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
-	NET_TCP_TW_RECYCLE=66,
-	NET_IPV4_ALWAYS_DEFRAG=67,
-	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
-	NET_IPV4_INET_PEER_THRESHOLD=69,
-	NET_IPV4_INET_PEER_MINTTL=70,
-	NET_IPV4_INET_PEER_MAXTTL=71,
-	NET_IPV4_INET_PEER_GC_MINTIME=72,
-	NET_IPV4_INET_PEER_GC_MAXTIME=73,
-	NET_TCP_ORPHAN_RETRIES=74,
-	NET_TCP_ABORT_ON_OVERFLOW=75,
-	NET_TCP_SYNACK_RETRIES=76,
-	NET_TCP_MAX_ORPHANS=77,
-	NET_TCP_MAX_TW_BUCKETS=78,
-	NET_TCP_FACK=79,
-	NET_TCP_REORDERING=80,
-	NET_TCP_ECN=81,
-	NET_TCP_DSACK=82,
-	NET_TCP_MEM=83,
-	NET_TCP_WMEM=84,
-	NET_TCP_RMEM=85,
-	NET_TCP_APP_WIN=86,
-	NET_TCP_ADV_WIN_SCALE=87,
-	NET_IPV4_NONLOCAL_BIND=88,
-	NET_IPV4_ICMP_RATELIMIT=89,
-	NET_IPV4_ICMP_RATEMASK=90,
-	NET_TCP_TW_REUSE=91,
-	NET_TCP_FRTO=92,
-	NET_TCP_LOW_LATENCY=93,
-	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
-	NET_IPV4_IGMP_MAX_MSF=96,
-	NET_TCP_NO_METRICS_SAVE=97,
-	NET_TCP_DEFAULT_WIN_SCALE=105,
-	NET_TCP_MODERATE_RCVBUF=106,
-	NET_TCP_TSO_WIN_DIVISOR=107,
-	NET_TCP_BIC_BETA=108,
-	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
-	NET_TCP_CONG_CONTROL=110,
-	NET_TCP_ABC=111,
-	NET_IPV4_IPFRAG_MAX_DIST=112,
- 	NET_TCP_MTU_PROBING=113,
-	NET_TCP_BASE_MSS=114,
-	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
-	NET_TCP_DMA_COPYBREAK=116,
-	NET_TCP_SLOW_START_AFTER_IDLE=117,
-	NET_CIPSOV4_CACHE_ENABLE=118,
-	NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
-	NET_CIPSOV4_RBM_OPTFMT=120,
-	NET_CIPSOV4_RBM_STRICTVALID=121,
-	NET_TCP_AVAIL_CONG_CONTROL=122,
-	NET_TCP_ALLOWED_CONG_CONTROL=123,
-	NET_TCP_MAX_SSTHRESH=124,
-	NET_TCP_FRTO_RESPONSE=125,
-};
-
-enum {
-	NET_IPV4_ROUTE_FLUSH=1,
-	NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
-	NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
-	NET_IPV4_ROUTE_GC_THRESH=4,
-	NET_IPV4_ROUTE_MAX_SIZE=5,
-	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
-	NET_IPV4_ROUTE_GC_TIMEOUT=7,
-	NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
-	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
-	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
-	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
-	NET_IPV4_ROUTE_ERROR_COST=12,
-	NET_IPV4_ROUTE_ERROR_BURST=13,
-	NET_IPV4_ROUTE_GC_ELASTICITY=14,
-	NET_IPV4_ROUTE_MTU_EXPIRES=15,
-	NET_IPV4_ROUTE_MIN_PMTU=16,
-	NET_IPV4_ROUTE_MIN_ADVMSS=17,
-	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
-	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
-};
-
-enum
-{
-	NET_PROTO_CONF_ALL=-2,
-	NET_PROTO_CONF_DEFAULT=-3
-
-	/* And device ifindices ... */
-};
-
-enum
-{
-	NET_IPV4_CONF_FORWARDING=1,
-	NET_IPV4_CONF_MC_FORWARDING=2,
-	NET_IPV4_CONF_PROXY_ARP=3,
-	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
-	NET_IPV4_CONF_SECURE_REDIRECTS=5,
-	NET_IPV4_CONF_SEND_REDIRECTS=6,
-	NET_IPV4_CONF_SHARED_MEDIA=7,
-	NET_IPV4_CONF_RP_FILTER=8,
-	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
-	NET_IPV4_CONF_BOOTP_RELAY=10,
-	NET_IPV4_CONF_LOG_MARTIANS=11,
-	NET_IPV4_CONF_TAG=12,
-	NET_IPV4_CONF_ARPFILTER=13,
-	NET_IPV4_CONF_MEDIUM_ID=14,
-	NET_IPV4_CONF_NOXFRM=15,
-	NET_IPV4_CONF_NOPOLICY=16,
-	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
-	NET_IPV4_CONF_ARP_ANNOUNCE=18,
-	NET_IPV4_CONF_ARP_IGNORE=19,
-	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
-	NET_IPV4_CONF_ARP_ACCEPT=21,
-	NET_IPV4_CONF_ARP_NOTIFY=22,
-};
-
-/* /proc/sys/net/ipv4/netfilter */
-enum
-{
-	NET_IPV4_NF_CONNTRACK_MAX=1,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
-	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
-	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
-	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
-	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
-	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
-	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
-	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
-	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
-	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
-	NET_IPV4_NF_CONNTRACK_COUNT=27,
-	NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
-};
- 
-/* /proc/sys/net/ipv6 */
-enum {
-	NET_IPV6_CONF=16,
-	NET_IPV6_NEIGH=17,
-	NET_IPV6_ROUTE=18,
-	NET_IPV6_ICMP=19,
-	NET_IPV6_BINDV6ONLY=20,
-	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
-	NET_IPV6_IP6FRAG_LOW_THRESH=22,
-	NET_IPV6_IP6FRAG_TIME=23,
-	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
-	NET_IPV6_MLD_MAX_MSF=25,
-};
-
-enum {
-	NET_IPV6_ROUTE_FLUSH=1,
-	NET_IPV6_ROUTE_GC_THRESH=2,
-	NET_IPV6_ROUTE_MAX_SIZE=3,
-	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
-	NET_IPV6_ROUTE_GC_TIMEOUT=5,
-	NET_IPV6_ROUTE_GC_INTERVAL=6,
-	NET_IPV6_ROUTE_GC_ELASTICITY=7,
-	NET_IPV6_ROUTE_MTU_EXPIRES=8,
-	NET_IPV6_ROUTE_MIN_ADVMSS=9,
-	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
-};
-
-enum {
-	NET_IPV6_FORWARDING=1,
-	NET_IPV6_HOP_LIMIT=2,
-	NET_IPV6_MTU=3,
-	NET_IPV6_ACCEPT_RA=4,
-	NET_IPV6_ACCEPT_REDIRECTS=5,
-	NET_IPV6_AUTOCONF=6,
-	NET_IPV6_DAD_TRANSMITS=7,
-	NET_IPV6_RTR_SOLICITS=8,
-	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
-	NET_IPV6_RTR_SOLICIT_DELAY=10,
-	NET_IPV6_USE_TEMPADDR=11,
-	NET_IPV6_TEMP_VALID_LFT=12,
-	NET_IPV6_TEMP_PREFERED_LFT=13,
-	NET_IPV6_REGEN_MAX_RETRY=14,
-	NET_IPV6_MAX_DESYNC_FACTOR=15,
-	NET_IPV6_MAX_ADDRESSES=16,
-	NET_IPV6_FORCE_MLD_VERSION=17,
-	NET_IPV6_ACCEPT_RA_DEFRTR=18,
-	NET_IPV6_ACCEPT_RA_PINFO=19,
-	NET_IPV6_ACCEPT_RA_RTR_PREF=20,
-	NET_IPV6_RTR_PROBE_INTERVAL=21,
-	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
-	NET_IPV6_PROXY_NDP=23,
-	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
-	__NET_IPV6_MAX
-};
-
-/* /proc/sys/net/ipv6/icmp */
-enum {
-	NET_IPV6_ICMP_RATELIMIT=1
-};
-
-/* /proc/sys/net/<protocol>/neigh/<dev> */
-enum {
-	NET_NEIGH_MCAST_SOLICIT=1,
-	NET_NEIGH_UCAST_SOLICIT=2,
-	NET_NEIGH_APP_SOLICIT=3,
-	NET_NEIGH_RETRANS_TIME=4,
-	NET_NEIGH_REACHABLE_TIME=5,
-	NET_NEIGH_DELAY_PROBE_TIME=6,
-	NET_NEIGH_GC_STALE_TIME=7,
-	NET_NEIGH_UNRES_QLEN=8,
-	NET_NEIGH_PROXY_QLEN=9,
-	NET_NEIGH_ANYCAST_DELAY=10,
-	NET_NEIGH_PROXY_DELAY=11,
-	NET_NEIGH_LOCKTIME=12,
-	NET_NEIGH_GC_INTERVAL=13,
-	NET_NEIGH_GC_THRESH1=14,
-	NET_NEIGH_GC_THRESH2=15,
-	NET_NEIGH_GC_THRESH3=16,
-	NET_NEIGH_RETRANS_TIME_MS=17,
-	NET_NEIGH_REACHABLE_TIME_MS=18,
-};
-
-/* /proc/sys/net/dccp */
-enum {
-	NET_DCCP_DEFAULT=1,
-};
-
-/* /proc/sys/net/ipx */
-enum {
-	NET_IPX_PPROP_BROADCASTING=1,
-	NET_IPX_FORWARDING=2
-};
-
-/* /proc/sys/net/llc */
-enum {
-	NET_LLC2=1,
-	NET_LLC_STATION=2,
-};
-
-/* /proc/sys/net/llc/llc2 */
-enum {
-	NET_LLC2_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/station */
-enum {
-	NET_LLC_STATION_ACK_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/llc2/timeout */
-enum {
-	NET_LLC2_ACK_TIMEOUT=1,
-	NET_LLC2_P_TIMEOUT=2,
-	NET_LLC2_REJ_TIMEOUT=3,
-	NET_LLC2_BUSY_TIMEOUT=4,
-};
-
-/* /proc/sys/net/appletalk */
-enum {
-	NET_ATALK_AARP_EXPIRY_TIME=1,
-	NET_ATALK_AARP_TICK_TIME=2,
-	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
-	NET_ATALK_AARP_RESOLVE_TIME=4
-};
-
-
-/* /proc/sys/net/netrom */
-enum {
-	NET_NETROM_DEFAULT_PATH_QUALITY=1,
-	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
-	NET_NETROM_NETWORK_TTL_INITIALISER=3,
-	NET_NETROM_TRANSPORT_TIMEOUT=4,
-	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
-	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
-	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
-	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
-	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
-	NET_NETROM_ROUTING_CONTROL=10,
-	NET_NETROM_LINK_FAILS_COUNT=11,
-	NET_NETROM_RESET=12
-};
-
-/* /proc/sys/net/ax25 */
-enum {
-	NET_AX25_IP_DEFAULT_MODE=1,
-	NET_AX25_DEFAULT_MODE=2,
-	NET_AX25_BACKOFF_TYPE=3,
-	NET_AX25_CONNECT_MODE=4,
-	NET_AX25_STANDARD_WINDOW=5,
-	NET_AX25_EXTENDED_WINDOW=6,
-	NET_AX25_T1_TIMEOUT=7,
-	NET_AX25_T2_TIMEOUT=8,
-	NET_AX25_T3_TIMEOUT=9,
-	NET_AX25_IDLE_TIMEOUT=10,
-	NET_AX25_N2=11,
-	NET_AX25_PACLEN=12,
-	NET_AX25_PROTOCOL=13,
-	NET_AX25_DAMA_SLAVE_TIMEOUT=14
-};
-
-/* /proc/sys/net/rose */
-enum {
-	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
-	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
-	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
-	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
-	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
-	NET_ROSE_ROUTING_CONTROL=6,
-	NET_ROSE_LINK_FAIL_TIMEOUT=7,
-	NET_ROSE_MAX_VCS=8,
-	NET_ROSE_WINDOW_SIZE=9,
-	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
-};
-
-/* /proc/sys/net/x25 */
-enum {
-	NET_X25_RESTART_REQUEST_TIMEOUT=1,
-	NET_X25_CALL_REQUEST_TIMEOUT=2,
-	NET_X25_RESET_REQUEST_TIMEOUT=3,
-	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
-	NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
-	NET_X25_FORWARD=6
-};
-
-/* /proc/sys/net/token-ring */
-enum
-{
-	NET_TR_RIF_TIMEOUT=1
-};
-
-/* /proc/sys/net/decnet/ */
-enum {
-	NET_DECNET_NODE_TYPE = 1,
-	NET_DECNET_NODE_ADDRESS = 2,
-	NET_DECNET_NODE_NAME = 3,
-	NET_DECNET_DEFAULT_DEVICE = 4,
-	NET_DECNET_TIME_WAIT = 5,
-	NET_DECNET_DN_COUNT = 6,
-	NET_DECNET_DI_COUNT = 7,
-	NET_DECNET_DR_COUNT = 8,
-	NET_DECNET_DST_GC_INTERVAL = 9,
-	NET_DECNET_CONF = 10,
-	NET_DECNET_NO_FC_MAX_CWND = 11,
-	NET_DECNET_MEM = 12,
-	NET_DECNET_RMEM = 13,
-	NET_DECNET_WMEM = 14,
-	NET_DECNET_DEBUG_LEVEL = 255
-};
-
-/* /proc/sys/net/decnet/conf/<dev> */
-enum {
-	NET_DECNET_CONF_LOOPBACK = -2,
-	NET_DECNET_CONF_DDCMP = -3,
-	NET_DECNET_CONF_PPP = -4,
-	NET_DECNET_CONF_X25 = -5,
-	NET_DECNET_CONF_GRE = -6,
-	NET_DECNET_CONF_ETHER = -7
-
-	/* ... and ifindex of devices */
-};
-
-/* /proc/sys/net/decnet/conf/<dev>/ */
-enum {
-	NET_DECNET_CONF_DEV_PRIORITY = 1,
-	NET_DECNET_CONF_DEV_T1 = 2,
-	NET_DECNET_CONF_DEV_T2 = 3,
-	NET_DECNET_CONF_DEV_T3 = 4,
-	NET_DECNET_CONF_DEV_FORWARDING = 5,
-	NET_DECNET_CONF_DEV_BLKSIZE = 6,
-	NET_DECNET_CONF_DEV_STATE = 7
-};
-
-/* /proc/sys/net/sctp */
-enum {
-	NET_SCTP_RTO_INITIAL = 1,
-	NET_SCTP_RTO_MIN     = 2,
-	NET_SCTP_RTO_MAX     = 3,
-	NET_SCTP_RTO_ALPHA   = 4,
-	NET_SCTP_RTO_BETA    = 5,
-	NET_SCTP_VALID_COOKIE_LIFE       =  6,
-	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
-	NET_SCTP_PATH_MAX_RETRANS        =  8,
-	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
-	NET_SCTP_HB_INTERVAL             = 10,
-	NET_SCTP_PRESERVE_ENABLE         = 11,
-	NET_SCTP_MAX_BURST               = 12,
-	NET_SCTP_ADDIP_ENABLE		 = 13,
-	NET_SCTP_PRSCTP_ENABLE		 = 14,
-	NET_SCTP_SNDBUF_POLICY		 = 15,
-	NET_SCTP_SACK_TIMEOUT		 = 16,
-	NET_SCTP_RCVBUF_POLICY		 = 17,
-};
-
-/* /proc/sys/net/bridge */
-enum {
-	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
-	NET_BRIDGE_NF_CALL_IPTABLES = 2,
-	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
-	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
-	NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
-};
-
-/* proc/sys/net/irda */
-enum {
-	NET_IRDA_DISCOVERY=1,
-	NET_IRDA_DEVNAME=2,
-	NET_IRDA_DEBUG=3,
-	NET_IRDA_FAST_POLL=4,
-	NET_IRDA_DISCOVERY_SLOTS=5,
-	NET_IRDA_DISCOVERY_TIMEOUT=6,
-	NET_IRDA_SLOT_TIMEOUT=7,
-	NET_IRDA_MAX_BAUD_RATE=8,
-	NET_IRDA_MIN_TX_TURN_TIME=9,
-	NET_IRDA_MAX_TX_DATA_SIZE=10,
-	NET_IRDA_MAX_TX_WINDOW=11,
-	NET_IRDA_MAX_NOREPLY_TIME=12,
-	NET_IRDA_WARN_NOREPLY_TIME=13,
-	NET_IRDA_LAP_KEEPALIVE_TIME=14,
-};
-
-
-/* CTL_FS names: */
-enum
-{
-	FS_NRINODE=1,	/* int:current number of allocated inodes */
-	FS_STATINODE=2,
-	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
-	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
-	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
-	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
-	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
-	FS_DENTRY=8,
-	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
-	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
-	FS_OVERFLOWUID=11,	/* int: overflow UID */
-	FS_OVERFLOWGID=12,	/* int: overflow GID */
-	FS_LEASES=13,	/* int: leases enabled */
-	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
-	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
-	FS_DQSTATS=16,	/* disc quota usage statistics and control */
-	FS_XFS=17,	/* struct: control xfs parameters */
-	FS_AIO_NR=18,	/* current system-wide number of aio requests */
-	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
-	FS_INOTIFY=20,	/* inotify submenu */
-	FS_OCFS2=988,	/* ocfs2 */
-};
-
-/* /proc/sys/fs/quota/ */
-enum {
-	FS_DQ_LOOKUPS = 1,
-	FS_DQ_DROPS = 2,
-	FS_DQ_READS = 3,
-	FS_DQ_WRITES = 4,
-	FS_DQ_CACHE_HITS = 5,
-	FS_DQ_ALLOCATED = 6,
-	FS_DQ_FREE = 7,
-	FS_DQ_SYNCS = 8,
-	FS_DQ_WARNINGS = 9,
-};
-
-/* CTL_DEBUG names: */
-
-/* CTL_DEV names: */
-enum {
-	DEV_CDROM=1,
-	DEV_HWMON=2,
-	DEV_PARPORT=3,
-	DEV_RAID=4,
-	DEV_MAC_HID=5,
-	DEV_SCSI=6,
-	DEV_IPMI=7,
-};
-
-/* /proc/sys/dev/cdrom */
-enum {
-	DEV_CDROM_INFO=1,
-	DEV_CDROM_AUTOCLOSE=2,
-	DEV_CDROM_AUTOEJECT=3,
-	DEV_CDROM_DEBUG=4,
-	DEV_CDROM_LOCK=5,
-	DEV_CDROM_CHECK_MEDIA=6
-};
-
-/* /proc/sys/dev/parport */
-enum {
-	DEV_PARPORT_DEFAULT=-3
-};
-
-/* /proc/sys/dev/raid */
-enum {
-	DEV_RAID_SPEED_LIMIT_MIN=1,
-	DEV_RAID_SPEED_LIMIT_MAX=2
-};
-
-/* /proc/sys/dev/parport/default */
-enum {
-	DEV_PARPORT_DEFAULT_TIMESLICE=1,
-	DEV_PARPORT_DEFAULT_SPINTIME=2
-};
-
-/* /proc/sys/dev/parport/parport n */
-enum {
-	DEV_PARPORT_SPINTIME=1,
-	DEV_PARPORT_BASE_ADDR=2,
-	DEV_PARPORT_IRQ=3,
-	DEV_PARPORT_DMA=4,
-	DEV_PARPORT_MODES=5,
-	DEV_PARPORT_DEVICES=6,
-	DEV_PARPORT_AUTOPROBE=16
-};
-
-/* /proc/sys/dev/parport/parport n/devices/ */
-enum {
-	DEV_PARPORT_DEVICES_ACTIVE=-3,
-};
-
-/* /proc/sys/dev/parport/parport n/devices/device n */
-enum {
-	DEV_PARPORT_DEVICE_TIMESLICE=1,
-};
-
-/* /proc/sys/dev/mac_hid */
-enum {
-	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
-	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
-	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
-	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
-	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
-	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
-};
-
-/* /proc/sys/dev/scsi */
-enum {
-	DEV_SCSI_LOGGING_LEVEL=1,
-};
-
-/* /proc/sys/dev/ipmi */
-enum {
-	DEV_IPMI_POWEROFF_POWERCYCLE=1,
-};
-
-/* /proc/sys/abi */
-enum
-{
-	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
-	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
-	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
-	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
-	ABI_TRACE=5,		/* tracing flags */
-	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
-};
-
-#ifdef __KERNEL__
 #include <linux/list.h>
 #include <linux/rcupdate.h>
 #include <linux/wait.h>
 #include <linux/rbtree.h>
+#include <uapi/linux/sysctl.h>
 
 /* For the /proc/sys support */
 struct ctl_table;
@@ -1122,6 +215,4 @@ static inline void setup_sysctl_set(struct ctl_table_set *p,
 
 #endif /* CONFIG_SYSCTL */
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SYSCTL_H */
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 67c789ae719c7f6216870db74df3afc0223de66b..8a7fc4be2d75f11d0ff774e727940dd16a2c64aa 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -17,217 +17,13 @@
 #ifndef _LINUX_TCP_H
 #define _LINUX_TCP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-struct tcphdr {
-	__be16	source;
-	__be16	dest;
-	__be32	seq;
-	__be32	ack_seq;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u16	res1:4,
-		doff:4,
-		fin:1,
-		syn:1,
-		rst:1,
-		psh:1,
-		ack:1,
-		urg:1,
-		ece:1,
-		cwr:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u16	doff:4,
-		res1:4,
-		cwr:1,
-		ece:1,
-		urg:1,
-		ack:1,
-		psh:1,
-		rst:1,
-		syn:1,
-		fin:1;
-#else
-#error	"Adjust your <asm/byteorder.h> defines"
-#endif	
-	__be16	window;
-	__sum16	check;
-	__be16	urg_ptr;
-};
-
-/*
- *	The union cast uses a gcc extension to avoid aliasing problems
- *  (union is compatible to any of its members)
- *  This means this part of the code is -fstrict-aliasing safe now.
- */
-union tcp_word_hdr { 
-	struct tcphdr hdr;
-	__be32 		  words[5];
-}; 
-
-#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
-
-enum { 
-	TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
-	TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
-	TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
-	TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
-	TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
-	TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
-	TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
-	TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
-	TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
-	TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
-}; 
-
-/*
- * TCP general constants
- */
-#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
-#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
-
-/* TCP socket options */
-#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
-#define TCP_MAXSEG		2	/* Limit MSS */
-#define TCP_CORK		3	/* Never send partially complete segments */
-#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
-#define TCP_KEEPINTVL		5	/* Interval between keepalives */
-#define TCP_KEEPCNT		6	/* Number of keepalives before death */
-#define TCP_SYNCNT		7	/* Number of SYN retransmits */
-#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
-#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
-#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
-#define TCP_INFO		11	/* Information about this connection. */
-#define TCP_QUICKACK		12	/* Block/reenable quick acks */
-#define TCP_CONGESTION		13	/* Congestion control algorithm */
-#define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
-#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
-#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
-#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
-#define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
-#define TCP_REPAIR		19	/* TCP sock is under repair right now */
-#define TCP_REPAIR_QUEUE	20
-#define TCP_QUEUE_SEQ		21
-#define TCP_REPAIR_OPTIONS	22
-#define TCP_FASTOPEN		23	/* Enable FastOpen on listeners */
-
-struct tcp_repair_opt {
-	__u32	opt_code;
-	__u32	opt_val;
-};
-
-enum {
-	TCP_NO_QUEUE,
-	TCP_RECV_QUEUE,
-	TCP_SEND_QUEUE,
-	TCP_QUEUES_NR,
-};
-
-/* for TCP_INFO socket option */
-#define TCPI_OPT_TIMESTAMPS	1
-#define TCPI_OPT_SACK		2
-#define TCPI_OPT_WSCALE		4
-#define TCPI_OPT_ECN		8 /* ECN was negociated at TCP session init */
-#define TCPI_OPT_ECN_SEEN	16 /* we received at least one packet with ECT */
-
-enum tcp_ca_state {
-	TCP_CA_Open = 0,
-#define TCPF_CA_Open	(1<<TCP_CA_Open)
-	TCP_CA_Disorder = 1,
-#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
-	TCP_CA_CWR = 2,
-#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
-	TCP_CA_Recovery = 3,
-#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
-	TCP_CA_Loss = 4
-#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
-};
-
-struct tcp_info {
-	__u8	tcpi_state;
-	__u8	tcpi_ca_state;
-	__u8	tcpi_retransmits;
-	__u8	tcpi_probes;
-	__u8	tcpi_backoff;
-	__u8	tcpi_options;
-	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
-
-	__u32	tcpi_rto;
-	__u32	tcpi_ato;
-	__u32	tcpi_snd_mss;
-	__u32	tcpi_rcv_mss;
-
-	__u32	tcpi_unacked;
-	__u32	tcpi_sacked;
-	__u32	tcpi_lost;
-	__u32	tcpi_retrans;
-	__u32	tcpi_fackets;
-
-	/* Times. */
-	__u32	tcpi_last_data_sent;
-	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
-	__u32	tcpi_last_data_recv;
-	__u32	tcpi_last_ack_recv;
-
-	/* Metrics. */
-	__u32	tcpi_pmtu;
-	__u32	tcpi_rcv_ssthresh;
-	__u32	tcpi_rtt;
-	__u32	tcpi_rttvar;
-	__u32	tcpi_snd_ssthresh;
-	__u32	tcpi_snd_cwnd;
-	__u32	tcpi_advmss;
-	__u32	tcpi_reordering;
-
-	__u32	tcpi_rcv_rtt;
-	__u32	tcpi_rcv_space;
-
-	__u32	tcpi_total_retrans;
-};
-
-/* for TCP_MD5SIG socket option */
-#define TCP_MD5SIG_MAXKEYLEN	80
-
-struct tcp_md5sig {
-	struct __kernel_sockaddr_storage tcpm_addr;	/* address associated */
-	__u16	__tcpm_pad1;				/* zero */
-	__u16	tcpm_keylen;				/* key length */
-	__u32	__tcpm_pad2;				/* zero */
-	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
-};
-
-/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
-#define TCP_COOKIE_MIN		 8		/*  64-bits */
-#define TCP_COOKIE_MAX		16		/* 128-bits */
-#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
-
-/* Flags for both getsockopt and setsockopt */
-#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
-#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
-						 * supercedes everything. */
-
-/* Flags for getsockopt */
-#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
-#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
-
-/* TCP_COOKIE_TRANSACTIONS data */
-struct tcp_cookie_transactions {
-	__u16	tcpct_flags;			/* see above */
-	__u8	__tcpct_pad1;			/* zero */
-	__u8	tcpct_cookie_desired;		/* bytes */
-	__u16	tcpct_s_data_desired;		/* bytes of variable data */
-	__u16	tcpct_used;			/* bytes in value */
-	__u8	tcpct_value[TCP_MSS_DEFAULT];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/skbuff.h>
 #include <linux/dmaengine.h>
 #include <net/sock.h>
 #include <net/inet_connection_sock.h>
 #include <net/inet_timewait_sock.h>
+#include <uapi/linux/tcp.h>
 
 static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb)
 {
@@ -595,6 +391,4 @@ static inline int fastopen_init_queue(struct sock *sk, int backlog)
 	return 0;
 }
 
-#endif	/* __KERNEL__ */
-
 #endif	/* _LINUX_TCP_H */
diff --git a/include/linux/time.h b/include/linux/time.h
index b51e664c83e7237e17e02f0b5752ce586f87dbd4..4d358e9d10f100757176df607b502a451aafc6bb 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -1,33 +1,10 @@
 #ifndef _LINUX_TIME_H
 #define _LINUX_TIME_H
 
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 # include <linux/cache.h>
 # include <linux/seqlock.h>
 # include <linux/math64.h>
-#endif
-
-#ifndef _STRUCT_TIMESPEC
-#define _STRUCT_TIMESPEC
-struct timespec {
-	__kernel_time_t	tv_sec;			/* seconds */
-	long		tv_nsec;		/* nanoseconds */
-};
-#endif
-
-struct timeval {
-	__kernel_time_t		tv_sec;		/* seconds */
-	__kernel_suseconds_t	tv_usec;	/* microseconds */
-};
-
-struct timezone {
-	int	tz_minuteswest;	/* minutes west of Greenwich */
-	int	tz_dsttime;	/* type of dst correction */
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/time.h>
 
 extern struct timezone sys_tz;
 
@@ -280,51 +257,4 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
 	a->tv_nsec = ns;
 }
 
-#endif /* __KERNEL__ */
-
-/*
- * Names of the interval timers, and structure
- * defining a timer setting:
- */
-#define	ITIMER_REAL		0
-#define	ITIMER_VIRTUAL		1
-#define	ITIMER_PROF		2
-
-struct itimerspec {
-	struct timespec it_interval;	/* timer period */
-	struct timespec it_value;	/* timer expiration */
-};
-
-struct itimerval {
-	struct timeval it_interval;	/* timer interval */
-	struct timeval it_value;	/* current value */
-};
-
-/*
- * The IDs of the various system clocks (for POSIX.1b interval timers):
- */
-#define CLOCK_REALTIME			0
-#define CLOCK_MONOTONIC			1
-#define CLOCK_PROCESS_CPUTIME_ID	2
-#define CLOCK_THREAD_CPUTIME_ID		3
-#define CLOCK_MONOTONIC_RAW		4
-#define CLOCK_REALTIME_COARSE		5
-#define CLOCK_MONOTONIC_COARSE		6
-#define CLOCK_BOOTTIME			7
-#define CLOCK_REALTIME_ALARM		8
-#define CLOCK_BOOTTIME_ALARM		9
-
-/*
- * The IDs of various hardware clocks:
- */
-#define CLOCK_SGI_CYCLE			10
-#define MAX_CLOCKS			16
-#define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
-#define CLOCKS_MONO			CLOCK_MONOTONIC
-
-/*
- * The various flags for setting POSIX.1b interval timers:
- */
-#define TIMER_ABSTIME			0x01
-
 #endif
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 7c5ceb20e03a8cf2195ae114e1f78905668158e5..5ec87c60b97c5029a5f58b4282a0428767be3746 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -53,120 +53,11 @@
 #ifndef _LINUX_TIMEX_H
 #define _LINUX_TIMEX_H
 
-#include <linux/time.h>
+#include <uapi/linux/timex.h>
 
-#define NTP_API		4	/* NTP API version */
-
-/*
- * syscall interface - used (mainly by NTP daemon)
- * to discipline kernel clock oscillator
- */
-struct timex {
-	unsigned int modes;	/* mode selector */
-	long offset;		/* time offset (usec) */
-	long freq;		/* frequency offset (scaled ppm) */
-	long maxerror;		/* maximum error (usec) */
-	long esterror;		/* estimated error (usec) */
-	int status;		/* clock command/status */
-	long constant;		/* pll time constant */
-	long precision;		/* clock precision (usec) (read only) */
-	long tolerance;		/* clock frequency tolerance (ppm)
-				 * (read only)
-				 */
-	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
-	long tick;		/* (modified) usecs between clock ticks */
-
-	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
-	long jitter;            /* pps jitter (us) (ro) */
-	int shift;              /* interval duration (s) (shift) (ro) */
-	long stabil;            /* pps stability (scaled ppm) (ro) */
-	long jitcnt;            /* jitter limit exceeded (ro) */
-	long calcnt;            /* calibration intervals (ro) */
-	long errcnt;            /* calibration errors (ro) */
-	long stbcnt;            /* stability limit exceeded (ro) */
-
-	int tai;		/* TAI offset (ro) */
-
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32;
-};
-
-/*
- * Mode codes (timex.mode)
- */
-#define ADJ_OFFSET		0x0001	/* time offset */
-#define ADJ_FREQUENCY		0x0002	/* frequency offset */
-#define ADJ_MAXERROR		0x0004	/* maximum time error */
-#define ADJ_ESTERROR		0x0008	/* estimated time error */
-#define ADJ_STATUS		0x0010	/* clock status */
-#define ADJ_TIMECONST		0x0020	/* pll time constant */
-#define ADJ_TAI			0x0080	/* set TAI offset */
-#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
-#define ADJ_MICRO		0x1000	/* select microsecond resolution */
-#define ADJ_NANO		0x2000	/* select nanosecond resolution */
-#define ADJ_TICK		0x4000	/* tick value */
-
-#ifdef __KERNEL__
 #define ADJ_ADJTIME		0x8000	/* switch between adjtime/adjtimex modes */
 #define ADJ_OFFSET_SINGLESHOT	0x0001	/* old-fashioned adjtime */
 #define ADJ_OFFSET_READONLY	0x2000	/* read-only adjtime */
-#else
-#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
-#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
-#endif
-
-/* NTP userland likes the MOD_ prefix better */
-#define MOD_OFFSET	ADJ_OFFSET
-#define MOD_FREQUENCY	ADJ_FREQUENCY
-#define MOD_MAXERROR	ADJ_MAXERROR
-#define MOD_ESTERROR	ADJ_ESTERROR
-#define MOD_STATUS	ADJ_STATUS
-#define MOD_TIMECONST	ADJ_TIMECONST
-#define MOD_TAI	ADJ_TAI
-#define MOD_MICRO	ADJ_MICRO
-#define MOD_NANO	ADJ_NANO
-
-
-/*
- * Status codes (timex.status)
- */
-#define STA_PLL		0x0001	/* enable PLL updates (rw) */
-#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
-#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
-#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
-
-#define STA_INS		0x0010	/* insert leap (rw) */
-#define STA_DEL		0x0020	/* delete leap (rw) */
-#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
-#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
-
-#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
-#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
-#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
-#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
-
-#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
-#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
-#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
-#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
-
-/* read-only bits */
-#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
-	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
-
-/*
- * Clock states (time_state)
- */
-#define TIME_OK		0	/* clock synchronized, no leap second */
-#define TIME_INS	1	/* insert leap second */
-#define TIME_DEL	2	/* delete leap second */
-#define TIME_OOP	3	/* leap second in progress */
-#define TIME_WAIT	4	/* leap second has occurred */
-#define TIME_ERROR	5	/* clock not synchronized */
-#define TIME_BAD	TIME_ERROR /* bw compat */
-
-#ifdef __KERNEL__
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/param.h>
@@ -261,6 +152,4 @@ int read_current_timer(unsigned long *timer_val);
 /* The clock frequency of the i8253/i8254 PIT */
 #define PIT_TICK_RATE 1193182ul
 
-#endif /* KERNEL */
-
 #endif /* LINUX_TIMEX_H */
diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h
index 772dedbc3a22e039328d2e148dee867b866d007b..915c3bb164ac5024e493e6d8e925ef7c1937f7a2 100644
--- a/include/linux/toshiba.h
+++ b/include/linux/toshiba.h
@@ -16,25 +16,10 @@
  * General Public License for more details.
  *
  */
-
 #ifndef _LINUX_TOSHIBA_H
 #define _LINUX_TOSHIBA_H
 
-#define TOSH_PROC "/proc/toshiba"
-#define TOSH_DEVICE "/dev/toshiba"
-#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
-
-typedef struct {
-	unsigned int eax;
-	unsigned int ebx __attribute__ ((packed));
-	unsigned int ecx __attribute__ ((packed));
-	unsigned int edx __attribute__ ((packed));
-	unsigned int esi __attribute__ ((packed));
-	unsigned int edi __attribute__ ((packed));
-} SMMRegisters;
+#include <uapi/linux/toshiba.h>
 
-#ifdef __KERNEL__
 int tosh_smm(SMMRegisters *regs);
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 4f6c59a5fb7941996e8062dd41efe99ec3623555..f0b4eb47297c8b10a356c96d929e272702a7dd7b 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -1,41 +1,6 @@
 #ifndef _LINUX_TTY_H
 #define _LINUX_TTY_H
 
-/*
- * 'tty.h' defines some structures used by tty_io.c and some defines.
- */
-
-#define NR_LDISCS		30
-
-/* line disciplines */
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6	/* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9	/* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
-#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
-				/* cards about SMS messages */
-#define N_HDLC		13	/* synchronous HDLC */
-#define N_SYNC_PPP	14	/* synchronous PPP */
-#define N_HCI		15	/* Bluetooth HCI UART */
-#define N_GIGASET_M101	16	/* Siemens Gigaset M101 serial DECT adapter */
-#define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
-#define N_PPS		18	/* Pulse per Second */
-#define N_V253		19	/* Codec control over voice modem */
-#define N_CAIF		20      /* CAIF protocol for talking to modems */
-#define N_GSM0710	21	/* GSM 0710 Mux */
-#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
-#define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
-#define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
-
-#ifdef __KERNEL__
 #include <linux/fs.h>
 #include <linux/major.h>
 #include <linux/termios.h>
@@ -44,6 +9,7 @@
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
 #include <linux/tty_flags.h>
+#include <uapi/linux/tty.h>
 
 
 
@@ -694,5 +660,4 @@ do {									\
 } while (0)
 
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/types.h b/include/linux/types.h
index bf0dd7524b2a81cb660723c08ce76857991df54e..1cc0e4b9a048140420c45317980bd15f8e6524a8 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -1,22 +1,13 @@
 #ifndef _LINUX_TYPES_H
 #define _LINUX_TYPES_H
 
-#include <asm/types.h>
+#define __EXPORTED_HEADERS__
+#include <uapi/linux/types.h>
 
 #ifndef __ASSEMBLY__
-#ifdef	__KERNEL__
 
 #define DECLARE_BITMAP(name,bits) \
 	unsigned long name[BITS_TO_LONGS(bits)]
-#else
-#ifndef __EXPORTED_HEADERS__
-#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
-#endif /* __EXPORTED_HEADERS__ */
-#endif
-
-#include <linux/posix_types.h>
-
-#ifdef __KERNEL__
 
 typedef __u32 __kernel_dev_t;
 
@@ -157,48 +148,12 @@ typedef u64 dma_addr_t;
 typedef u32 dma_addr_t;
 #endif /* dma_addr_t */
 
-#endif /* __KERNEL__ */
-
-/*
- * Below are truly Linux-specific types that should never collide with
- * any application/library that wants linux/types.h.
- */
-
 #ifdef __CHECKER__
-#define __bitwise__ __attribute__((bitwise))
 #else
-#define __bitwise__
 #endif
 #ifdef __CHECK_ENDIAN__
-#define __bitwise __bitwise__
 #else
-#define __bitwise
 #endif
-
-typedef __u16 __bitwise __le16;
-typedef __u16 __bitwise __be16;
-typedef __u32 __bitwise __le32;
-typedef __u32 __bitwise __be32;
-typedef __u64 __bitwise __le64;
-typedef __u64 __bitwise __be64;
-
-typedef __u16 __bitwise __sum16;
-typedef __u32 __bitwise __wsum;
-
-/*
- * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
- * common 32/64-bit compat problems.
- * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
- * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
- * aligned_64 type enforces 8-byte alignment so that structs containing
- * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
- * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
- */
-#define __aligned_u64 __u64 __attribute__((aligned(8)))
-#define __aligned_be64 __be64 __attribute__((aligned(8)))
-#define __aligned_le64 __le64 __attribute__((aligned(8)))
-
-#ifdef __KERNEL__
 typedef unsigned __bitwise__ gfp_t;
 typedef unsigned __bitwise__ fmode_t;
 
@@ -256,6 +211,5 @@ struct callback_head {
 };
 #define rcu_head callback_head
 
-#endif	/* __KERNEL__ */
 #endif /*  __ASSEMBLY__ */
 #endif /* _LINUX_TYPES_H */
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 03f72a2ba028f17dd1776e4e9a01537a539f6f90..0b67d77935204b2ae7dab682270cc30a1b1da6d6 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -17,28 +17,10 @@
 #ifndef _LINUX_UDP_H
 #define _LINUX_UDP_H
 
-#include <linux/types.h>
-
-struct udphdr {
-	__be16	source;
-	__be16	dest;
-	__be16	len;
-	__sum16	check;
-};
-
-/* UDP socket options */
-#define UDP_CORK	1	/* Never send partially complete segments */
-#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
-
-/* UDP encapsulation types */
-#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
-#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
-#define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
-
-#ifdef __KERNEL__
 #include <net/inet_sock.h>
 #include <linux/skbuff.h>
 #include <net/netns/hash.h>
+#include <uapi/linux/udp.h>
 
 static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
 {
@@ -96,6 +78,4 @@ static inline struct udp_sock *udp_sk(const struct sock *sk)
 
 #define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag)
 
-#endif
-
 #endif	/* _LINUX_UDP_H */
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index c454bbe39ee78688d6c5e797236649148c909900..0a4487d3fb1ee43d436c37712f76403006c86dc4 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -1,5 +1,3 @@
-#ifndef __UINPUT_H_
-#define __UINPUT_H_
 /*
  *  User level driver support for input subsystem
  *
@@ -31,13 +29,11 @@
  *	0.1	20/06/2002
  *		- first public version
  */
+#ifndef __UINPUT_H_
+#define __UINPUT_H_
 
-#include <linux/types.h>
-#include <linux/input.h>
-
-#define UINPUT_VERSION		3
+#include <uapi/linux/uinput.h>
 
-#ifdef __KERNEL__
 #define UINPUT_NAME		"uinput"
 #define UINPUT_BUFFER_SIZE	16
 #define UINPUT_NUM_REQUESTS	16
@@ -75,103 +71,4 @@ struct uinput_device {
 	wait_queue_head_t	requests_waitq;
 	spinlock_t		requests_lock;
 };
-#endif	/* __KERNEL__ */
-
-struct uinput_ff_upload {
-	__u32			request_id;
-	__s32			retval;
-	struct ff_effect	effect;
-	struct ff_effect	old;
-};
-
-struct uinput_ff_erase {
-	__u32			request_id;
-	__s32			retval;
-	__u32			effect_id;
-};
-
-/* ioctl */
-#define UINPUT_IOCTL_BASE	'U'
-#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
-#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
-
-#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
-#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
-#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
-#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
-#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
-#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
-#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
-#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
-#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
-#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
-#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
-
-#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
-#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
-#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
-#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
-
-/*
- * To write a force-feedback-capable driver, the upload_effect
- * and erase_effect callbacks in input_dev must be implemented.
- * The uinput driver will generate a fake input event when one of
- * these callbacks are invoked. The userspace code then uses
- * ioctls to retrieve additional parameters and send the return code.
- * The callback blocks until this return code is sent.
- *
- * The described callback mechanism is only used if ff_effects_max
- * is set.
- *
- * To implement upload_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_upload struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
- *      uinput_ff_upload struct. It will be filled in with the
- *      ff_effects passed to upload_effect().
- *   4. Perform the effect upload, and place a return code back into
-        the uinput_ff_upload struct.
- *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
- *      uinput_ff_upload_effect struct. This will complete execution
- *      of our upload_effect() handler.
- *
- * To implement erase_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_erase struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
- *      uinput_ff_erase struct. It will be filled in with the
- *      effect ID passed to erase_effect().
- *   4. Perform the effect erasure, and place a return code back
- *      into the uinput_ff_erase struct.
- *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
- *      uinput_ff_erase_effect struct. This will complete execution
- *      of our erase_effect() handler.
- */
-
-/*
- * This is the new event type, used only by uinput.
- * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
- * is the unique request ID. This number was picked
- * arbitrarily, above EV_MAX (since the input system
- * never sees it) but in the range of a 16-bit int.
- */
-#define EV_UINPUT		0x0101
-#define UI_FF_UPLOAD		1
-#define UI_FF_ERASE		2
-
-#define UINPUT_MAX_NAME_SIZE	80
-struct uinput_user_dev {
-	char name[UINPUT_MAX_NAME_SIZE];
-	struct input_id id;
-	__u32 ff_effects_max;
-	__s32 absmax[ABS_CNT];
-	__s32 absmin[ABS_CNT];
-	__s32 absfuzz[ABS_CNT];
-	__s32 absflat[ABS_CNT];
-};
 #endif	/* __UINPUT_H_ */
-
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 98c114323a8be51299300bf440ec6ff167ac2fdb..629aaf51f30b8c1fdc6e27cd086c9caf19378896 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -1,9 +1,3 @@
-#ifndef __LINUX_UIO_H
-#define __LINUX_UIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
 /*
  *	Berkeley style UIO structures	-	Alan Cox 1994.
  *
@@ -12,21 +6,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
+#ifndef __LINUX_UIO_H
+#define __LINUX_UIO_H
 
-struct iovec
-{
-	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
-	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
-};
-
-/*
- *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
- */
- 
-#define UIO_FASTIOV	8
-#define UIO_MAXIOV	1024
+#include <uapi/linux/uio.h>
 
-#ifdef __KERNEL__
 
 struct kvec {
 	void *iov_base; /* and that should *never* hold a userland pointer */
@@ -52,5 +36,3 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
 #endif
-
-#endif
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 4abe28e41cbcd90ce9297ac65bafbcc9add4c861..04a26285416cf339dbbef58e5565b676bcf7c65a 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -25,126 +25,11 @@
  */
 
 /*****************************************************************************/
-
 #ifndef _LINUX_USBDEVICE_FS_H
 #define _LINUX_USBDEVICE_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* --------------------------------------------------------------------- */
-
-/* usbdevfs ioctl codes */
-
-struct usbdevfs_ctrltransfer {
-	__u8 bRequestType;
-	__u8 bRequest;
-	__u16 wValue;
-	__u16 wIndex;
-	__u16 wLength;
-	__u32 timeout;  /* in milliseconds */
- 	void __user *data;
-};
-
-struct usbdevfs_bulktransfer {
-	unsigned int ep;
-	unsigned int len;
-	unsigned int timeout; /* in milliseconds */
-	void __user *data;
-};
-
-struct usbdevfs_setinterface {
-	unsigned int interface;
-	unsigned int altsetting;
-};
-
-struct usbdevfs_disconnectsignal {
-	unsigned int signr;
-	void __user *context;
-};
-
-#define USBDEVFS_MAXDRIVERNAME 255
-
-struct usbdevfs_getdriver {
-	unsigned int interface;
-	char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-struct usbdevfs_connectinfo {
-	unsigned int devnum;
-	unsigned char slow;
-};
-
-#define USBDEVFS_URB_SHORT_NOT_OK	0x01
-#define USBDEVFS_URB_ISO_ASAP		0x02
-#define USBDEVFS_URB_BULK_CONTINUATION	0x04
-#define USBDEVFS_URB_NO_FSBR		0x20
-#define USBDEVFS_URB_ZERO_PACKET	0x40
-#define USBDEVFS_URB_NO_INTERRUPT	0x80
-
-#define USBDEVFS_URB_TYPE_ISO		   0
-#define USBDEVFS_URB_TYPE_INTERRUPT	   1
-#define USBDEVFS_URB_TYPE_CONTROL	   2
-#define USBDEVFS_URB_TYPE_BULK		   3
+#include <uapi/linux/usbdevice_fs.h>
 
-struct usbdevfs_iso_packet_desc {
-	unsigned int length;
-	unsigned int actual_length;
-	unsigned int status;
-};
-
-struct usbdevfs_urb {
-	unsigned char type;
-	unsigned char endpoint;
-	int status;
-	unsigned int flags;
-	void __user *buffer;
-	int buffer_length;
-	int actual_length;
-	int start_frame;
-	int number_of_packets;
-	int error_count;
-	unsigned int signr;	/* signal to be sent on completion,
-				  or 0 if none should be sent. */
-	void __user *usercontext;
-	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
-};
-
-/* ioctls for talking directly to drivers */
-struct usbdevfs_ioctl {
-	int	ifno;		/* interface 0..N ; negative numbers reserved */
-	int	ioctl_code;	/* MUST encode size + direction of data so the
-				 * macros in <asm/ioctl.h> give correct values */
-	void __user *data;	/* param buffer (in, or out) */
-};
-
-/* You can do most things with hubs just through control messages,
- * except find out what device connects to what port. */
-struct usbdevfs_hub_portinfo {
-	char nports;		/* number of downstream ports in this hub */
-	char port [127];	/* e.g. port 3 connects to device 27 */
-};
-
-/* Device capability flags */
-#define USBDEVFS_CAP_ZERO_PACKET		0x01
-#define USBDEVFS_CAP_BULK_CONTINUATION		0x02
-#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM		0x04
-#define USBDEVFS_CAP_BULK_SCATTER_GATHER	0x08
-
-/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
-
-/* disconnect-and-claim if the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER	0x01
-/* disconnect-and-claim except when the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER	0x02
-
-struct usbdevfs_disconnect_claim {
-	unsigned int interface;
-	unsigned int flags;
-	char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 
@@ -192,38 +77,4 @@ struct usbdevfs_ioctl32 {
 	compat_caddr_t data;
 };
 #endif
-#endif /* __KERNEL__ */
-
-#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
-#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
-#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
-#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
-#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
-#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
-#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
-#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
-#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
-#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
-#define USBDEVFS_DISCARDURB        _IO('U', 11)
-#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
-#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
-#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
-#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
-#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
-#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
-#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
-#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
-#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
-#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
-#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
-#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
-#define USBDEVFS_RESET             _IO('U', 20)
-#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
-#define USBDEVFS_DISCONNECT        _IO('U', 22)
-#define USBDEVFS_CONNECT           _IO('U', 23)
-#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
-#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
-#define USBDEVFS_GET_CAPABILITIES  _IOR('U', 26, __u32)
-#define USBDEVFS_DISCONNECT_CLAIM  _IOR('U', 27, struct usbdevfs_disconnect_claim)
-
 #endif /* _LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index c714ed75eae25c523e60c1cc6df1b249d3659134..2b345206722a2ff374bf690a84be4a20a2ffabfe 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -1,41 +1,12 @@
 #ifndef _LINUX_UTSNAME_H
 #define _LINUX_UTSNAME_H
 
-#define __OLD_UTS_LEN 8
-
-struct oldold_utsname {
-	char sysname[9];
-	char nodename[9];
-	char release[9];
-	char version[9];
-	char machine[9];
-};
-
-#define __NEW_UTS_LEN 64
-
-struct old_utsname {
-	char sysname[65];
-	char nodename[65];
-	char release[65];
-	char version[65];
-	char machine[65];
-};
-
-struct new_utsname {
-	char sysname[__NEW_UTS_LEN + 1];
-	char nodename[__NEW_UTS_LEN + 1];
-	char release[__NEW_UTS_LEN + 1];
-	char version[__NEW_UTS_LEN + 1];
-	char machine[__NEW_UTS_LEN + 1];
-	char domainname[__NEW_UTS_LEN + 1];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/sched.h>
 #include <linux/kref.h>
 #include <linux/nsproxy.h>
 #include <linux/err.h>
+#include <uapi/linux/utsname.h>
 
 enum uts_proc {
 	UTS_PROC_OSTYPE,
@@ -108,6 +79,4 @@ static inline struct new_utsname *init_utsname(void)
 
 extern struct rw_semaphore uts_sem;
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_UTSNAME_H */
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
index f86c37bfd4a06cae5123a841a7f9cb3b5e37135e..6df2509033d72d1920582e6bfd274db90eb85d6b 100644
--- a/include/linux/uuid.h
+++ b/include/linux/uuid.h
@@ -17,44 +17,11 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-
 #ifndef _LINUX_UUID_H_
 #define _LINUX_UUID_H_
 
-#include <linux/types.h>
-#include <linux/string.h>
-
-typedef struct {
-	__u8 b[16];
-} uuid_le;
-
-typedef struct {
-	__u8 b[16];
-} uuid_be;
-
-#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
-((uuid_le)								\
-{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
-   (b) & 0xff, ((b) >> 8) & 0xff,					\
-   (c) & 0xff, ((c) >> 8) & 0xff,					\
-   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+#include <uapi/linux/uuid.h>
 
-#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
-((uuid_be)								\
-{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
-   ((b) >> 8) & 0xff, (b) & 0xff,					\
-   ((c) >> 8) & 0xff, (c) & 0xff,					\
-   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define NULL_UUID_LE							\
-	UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
-		0x00, 0x00, 0x00, 0x00)
-
-#define NULL_UUID_BE							\
-	UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
-		0x00, 0x00, 0x00, 0x00)
-
-#ifdef __KERNEL__
 
 static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
 {
@@ -69,6 +36,4 @@ static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2)
 extern void uuid_le_gen(uuid_le *u);
 extern void uuid_be_gen(uuid_be *u);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 0a4f180a11d856ae3832b02e8da04a46043a2efd..ab9e86224c5471f9a8c66554b243b0d9c7613d3b 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -11,15 +11,10 @@
 #ifndef VFIO_H
 #define VFIO_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define VFIO_API_VERSION	0
-
-#ifdef __KERNEL__	/* Internal VFIO-core/bus driver API */
 
 #include <linux/iommu.h>
 #include <linux/mm.h>
+#include <uapi/linux/vfio.h>
 
 /**
  * struct vfio_device_ops - VFIO bus driver device callbacks
@@ -92,354 +87,4 @@ extern void vfio_unregister_iommu_driver(
 	TYPE tmp;						\
 	offsetof(TYPE, MEMBER) + sizeof(tmp.MEMBER); })		\
 
-#endif /* __KERNEL__ */
-
-/* Kernel & User level defines for VFIO IOCTLs. */
-
-/* Extensions */
-
-#define VFIO_TYPE1_IOMMU		1
-
-/*
- * The IOCTL interface is designed for extensibility by embedding the
- * structure length (argsz) and flags into structures passed between
- * kernel and userspace.  We therefore use the _IO() macro for these
- * defines to avoid implicitly embedding a size into the ioctl request.
- * As structure fields are added, argsz will increase to match and flag
- * bits will be defined to indicate additional fields with valid data.
- * It's *always* the caller's responsibility to indicate the size of
- * the structure passed by setting argsz appropriately.
- */
-
-#define VFIO_TYPE	(';')
-#define VFIO_BASE	100
-
-/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
-
-/**
- * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
- *
- * Report the version of the VFIO API.  This allows us to bump the entire
- * API version should we later need to add or change features in incompatible
- * ways.
- * Return: VFIO_API_VERSION
- * Availability: Always
- */
-#define VFIO_GET_API_VERSION		_IO(VFIO_TYPE, VFIO_BASE + 0)
-
-/**
- * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
- *
- * Check whether an extension is supported.
- * Return: 0 if not supported, 1 (or some other positive integer) if supported.
- * Availability: Always
- */
-#define VFIO_CHECK_EXTENSION		_IO(VFIO_TYPE, VFIO_BASE + 1)
-
-/**
- * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
- *
- * Set the iommu to the given type.  The type must be supported by an
- * iommu driver as verified by calling CHECK_EXTENSION using the same
- * type.  A group must be set to this file descriptor before this
- * ioctl is available.  The IOMMU interfaces enabled by this call are
- * specific to the value set.
- * Return: 0 on success, -errno on failure
- * Availability: When VFIO group attached
- */
-#define VFIO_SET_IOMMU			_IO(VFIO_TYPE, VFIO_BASE + 2)
-
-/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
-
-/**
- * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
- *						struct vfio_group_status)
- *
- * Retrieve information about the group.  Fills in provided
- * struct vfio_group_info.  Caller sets argsz.
- * Return: 0 on succes, -errno on failure.
- * Availability: Always
- */
-struct vfio_group_status {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_GROUP_FLAGS_VIABLE		(1 << 0)
-#define VFIO_GROUP_FLAGS_CONTAINER_SET	(1 << 1)
-};
-#define VFIO_GROUP_GET_STATUS		_IO(VFIO_TYPE, VFIO_BASE + 3)
-
-/**
- * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
- *
- * Set the container for the VFIO group to the open VFIO file
- * descriptor provided.  Groups may only belong to a single
- * container.  Containers may, at their discretion, support multiple
- * groups.  Only when a container is set are all of the interfaces
- * of the VFIO file descriptor and the VFIO group file descriptor
- * available to the user.
- * Return: 0 on success, -errno on failure.
- * Availability: Always
- */
-#define VFIO_GROUP_SET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 4)
-
-/**
- * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
- *
- * Remove the group from the attached container.  This is the
- * opposite of the SET_CONTAINER call and returns the group to
- * an initial state.  All device file descriptors must be released
- * prior to calling this interface.  When removing the last group
- * from a container, the IOMMU will be disabled and all state lost,
- * effectively also returning the VFIO file descriptor to an initial
- * state.
- * Return: 0 on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_UNSET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 5)
-
-/**
- * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
- *
- * Return a new file descriptor for the device object described by
- * the provided string.  The string should match a device listed in
- * the devices subdirectory of the IOMMU group sysfs entry.  The
- * group containing the device must already be added to this context.
- * Return: new file descriptor on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_GET_DEVICE_FD	_IO(VFIO_TYPE, VFIO_BASE + 6)
-
-/* --------------- IOCTLs for DEVICE file descriptors --------------- */
-
-/**
- * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
- *						struct vfio_device_info)
- *
- * Retrieve information about the device.  Fills in provided
- * struct vfio_device_info.  Caller sets argsz.
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_device_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_DEVICE_FLAGS_RESET	(1 << 0)	/* Device supports reset */
-#define VFIO_DEVICE_FLAGS_PCI	(1 << 1)	/* vfio-pci device */
-	__u32	num_regions;	/* Max region index + 1 */
-	__u32	num_irqs;	/* Max IRQ index + 1 */
-};
-#define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
-
-/**
- * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
- *				       struct vfio_region_info)
- *
- * Retrieve information about a device region.  Caller provides
- * struct vfio_region_info with index value set.  Caller sets argsz.
- * Implementation of region mapping is bus driver specific.  This is
- * intended to describe MMIO, I/O port, as well as bus specific
- * regions (ex. PCI config space).  Zero sized regions may be used
- * to describe unimplemented regions (ex. unimplemented PCI BARs).
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_region_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_REGION_INFO_FLAG_READ	(1 << 0) /* Region supports read */
-#define VFIO_REGION_INFO_FLAG_WRITE	(1 << 1) /* Region supports write */
-#define VFIO_REGION_INFO_FLAG_MMAP	(1 << 2) /* Region supports mmap */
-	__u32	index;		/* Region index */
-	__u32	resv;		/* Reserved for alignment */
-	__u64	size;		/* Region size (bytes) */
-	__u64	offset;		/* Region offset from start of device fd */
-};
-#define VFIO_DEVICE_GET_REGION_INFO	_IO(VFIO_TYPE, VFIO_BASE + 8)
-
-/**
- * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
- *				    struct vfio_irq_info)
- *
- * Retrieve information about a device IRQ.  Caller provides
- * struct vfio_irq_info with index value set.  Caller sets argsz.
- * Implementation of IRQ mapping is bus driver specific.  Indexes
- * using multiple IRQs are primarily intended to support MSI-like
- * interrupt blocks.  Zero count irq blocks may be used to describe
- * unimplemented interrupt types.
- *
- * The EVENTFD flag indicates the interrupt index supports eventfd based
- * signaling.
- *
- * The MASKABLE flags indicates the index supports MASK and UNMASK
- * actions described below.
- *
- * AUTOMASKED indicates that after signaling, the interrupt line is
- * automatically masked by VFIO and the user needs to unmask the line
- * to receive new interrupts.  This is primarily intended to distinguish
- * level triggered interrupts.
- *
- * The NORESIZE flag indicates that the interrupt lines within the index
- * are setup as a set and new subindexes cannot be enabled without first
- * disabling the entire index.  This is used for interrupts like PCI MSI
- * and MSI-X where the driver may only use a subset of the available
- * indexes, but VFIO needs to enable a specific number of vectors
- * upfront.  In the case of MSI-X, where the user can enable MSI-X and
- * then add and unmask vectors, it's up to userspace to make the decision
- * whether to allocate the maximum supported number of vectors or tear
- * down setup and incrementally increase the vectors as each is enabled.
- */
-struct vfio_irq_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IRQ_INFO_EVENTFD		(1 << 0)
-#define VFIO_IRQ_INFO_MASKABLE		(1 << 1)
-#define VFIO_IRQ_INFO_AUTOMASKED	(1 << 2)
-#define VFIO_IRQ_INFO_NORESIZE		(1 << 3)
-	__u32	index;		/* IRQ index */
-	__u32	count;		/* Number of IRQs within this index */
-};
-#define VFIO_DEVICE_GET_IRQ_INFO	_IO(VFIO_TYPE, VFIO_BASE + 9)
-
-/**
- * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
- *
- * Set signaling, masking, and unmasking of interrupts.  Caller provides
- * struct vfio_irq_set with all fields set.  'start' and 'count' indicate
- * the range of subindexes being specified.
- *
- * The DATA flags specify the type of data provided.  If DATA_NONE, the
- * operation performs the specified action immediately on the specified
- * interrupt(s).  For example, to unmask AUTOMASKED interrupt [0,0]:
- * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
- *
- * DATA_BOOL allows sparse support for the same on arrays of interrupts.
- * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
- * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
- * data = {1,0,1}
- *
- * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
- * A value of -1 can be used to either de-assign interrupts if already
- * assigned or skip un-assigned interrupts.  For example, to set an eventfd
- * to be trigger for interrupts [0,0] and [0,2]:
- * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
- * data = {fd1, -1, fd2}
- * If index [0,1] is previously set, two count = 1 ioctls calls would be
- * required to set [0,0] and [0,2] without changing [0,1].
- *
- * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
- * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
- * from userspace (ie. simulate hardware triggering).
- *
- * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
- * enables the interrupt index for the device.  Individual subindex interrupts
- * can be disabled using the -1 value for DATA_EVENTFD or the index can be
- * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
- *
- * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
- * ACTION_TRIGGER specifies kernel->user signaling.
- */
-struct vfio_irq_set {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IRQ_SET_DATA_NONE		(1 << 0) /* Data not present */
-#define VFIO_IRQ_SET_DATA_BOOL		(1 << 1) /* Data is bool (u8) */
-#define VFIO_IRQ_SET_DATA_EVENTFD	(1 << 2) /* Data is eventfd (s32) */
-#define VFIO_IRQ_SET_ACTION_MASK	(1 << 3) /* Mask interrupt */
-#define VFIO_IRQ_SET_ACTION_UNMASK	(1 << 4) /* Unmask interrupt */
-#define VFIO_IRQ_SET_ACTION_TRIGGER	(1 << 5) /* Trigger interrupt */
-	__u32	index;
-	__u32	start;
-	__u32	count;
-	__u8	data[];
-};
-#define VFIO_DEVICE_SET_IRQS		_IO(VFIO_TYPE, VFIO_BASE + 10)
-
-#define VFIO_IRQ_SET_DATA_TYPE_MASK	(VFIO_IRQ_SET_DATA_NONE | \
-					 VFIO_IRQ_SET_DATA_BOOL | \
-					 VFIO_IRQ_SET_DATA_EVENTFD)
-#define VFIO_IRQ_SET_ACTION_TYPE_MASK	(VFIO_IRQ_SET_ACTION_MASK | \
-					 VFIO_IRQ_SET_ACTION_UNMASK | \
-					 VFIO_IRQ_SET_ACTION_TRIGGER)
-/**
- * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
- *
- * Reset a device.
- */
-#define VFIO_DEVICE_RESET		_IO(VFIO_TYPE, VFIO_BASE + 11)
-
-/*
- * The VFIO-PCI bus driver makes use of the following fixed region and
- * IRQ index mapping.  Unimplemented regions return a size of zero.
- * Unimplemented IRQ types return a count of zero.
- */
-
-enum {
-	VFIO_PCI_BAR0_REGION_INDEX,
-	VFIO_PCI_BAR1_REGION_INDEX,
-	VFIO_PCI_BAR2_REGION_INDEX,
-	VFIO_PCI_BAR3_REGION_INDEX,
-	VFIO_PCI_BAR4_REGION_INDEX,
-	VFIO_PCI_BAR5_REGION_INDEX,
-	VFIO_PCI_ROM_REGION_INDEX,
-	VFIO_PCI_CONFIG_REGION_INDEX,
-	VFIO_PCI_NUM_REGIONS
-};
-
-enum {
-	VFIO_PCI_INTX_IRQ_INDEX,
-	VFIO_PCI_MSI_IRQ_INDEX,
-	VFIO_PCI_MSIX_IRQ_INDEX,
-	VFIO_PCI_NUM_IRQS
-};
-
-/* -------- API for Type1 VFIO IOMMU -------- */
-
-/**
- * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
- *
- * Retrieve information about the IOMMU object. Fills in provided
- * struct vfio_iommu_info. Caller sets argsz.
- *
- * XXX Should we do these by CHECK_EXTENSION too?
- */
-struct vfio_iommu_type1_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IOMMU_INFO_PGSIZES (1 << 0)	/* supported page sizes info */
-	__u64	iova_pgsizes;		/* Bitmap of supported page sizes */
-};
-
-#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
-
-/**
- * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
- *
- * Map process virtual addresses to IO virtual addresses using the
- * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
- */
-struct vfio_iommu_type1_dma_map {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
-#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
-	__u64	vaddr;				/* Process virtual address */
-	__u64	iova;				/* IO virtual address */
-	__u64	size;				/* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
-
-/**
- * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
- *
- * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
- * Caller sets argsz.
- */
-struct vfio_iommu_type1_dma_unmap {
-	__u32	argsz;
-	__u32	flags;
-	__u64	iova;				/* IO virtual address */
-	__u64	size;				/* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
-
 #endif /* VFIO_H */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 873adbe82988a8415cd25da1b4d7951873e22762..73ea2fb0473185cc752232d18e80e566a6f57e97 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -56,1945 +56,7 @@
 #ifndef __LINUX_VIDEODEV2_H
 #define __LINUX_VIDEODEV2_H
 
-#ifdef __KERNEL__
 #include <linux/time.h>     /* need struct timeval */
-#else
-#include <sys/time.h>
-#endif
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/v4l2-common.h>
-#include <linux/v4l2-controls.h>
-
-/*
- * Common stuff for both V4L1 and V4L2
- * Moved from videodev.h
- */
-#define VIDEO_MAX_FRAME               32
-#define VIDEO_MAX_PLANES               8
-
-#ifndef __KERNEL__
-
-/* These defines are V4L1 specific and should not be used with the V4L2 API!
-   They will be removed from this header in the future. */
-
-#define VID_TYPE_CAPTURE	1	/* Can capture */
-#define VID_TYPE_TUNER		2	/* Can tune */
-#define VID_TYPE_TELETEXT	4	/* Does teletext */
-#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
-#define VID_TYPE_CLIPPING	32	/* Can clip */
-#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
-#define VID_TYPE_SCALES		128	/* Scalable */
-#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
-#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
-#endif
-
-/*
- *	M I S C E L L A N E O U S
- */
-
-/*  Four-character-code (FOURCC) */
-#define v4l2_fourcc(a, b, c, d)\
-	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
-
-/*
- *	E N U M S
- */
-enum v4l2_field {
-	V4L2_FIELD_ANY           = 0, /* driver can choose from none,
-					 top, bottom, interlaced
-					 depending on whatever it thinks
-					 is approximate ... */
-	V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
-	V4L2_FIELD_TOP           = 2, /* top field only */
-	V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
-	V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
-	V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
-					 buffer, top-bottom order */
-	V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
-	V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
-					 separate buffers */
-	V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
-					 first and the top field is
-					 transmitted first */
-	V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
-					 first and the bottom field is
-					 transmitted first */
-};
-#define V4L2_FIELD_HAS_TOP(field)	\
-	((field) == V4L2_FIELD_TOP 	||\
-	 (field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB	||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTTOM(field)	\
-	((field) == V4L2_FIELD_BOTTOM 	||\
-	 (field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB	||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTH(field)	\
-	((field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB ||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-
-enum v4l2_buf_type {
-	V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
-	V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
-	V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
-	V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
-	V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
-	V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
-	V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
-#if 1
-	/* Experimental */
-	V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
-#endif
-	V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
-	V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
-	/* Deprecated, do not use */
-	V4L2_BUF_TYPE_PRIVATE              = 0x80,
-};
-
-#define V4L2_TYPE_IS_MULTIPLANAR(type)			\
-	((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE	\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
-
-#define V4L2_TYPE_IS_OUTPUT(type)				\
-	((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT			\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE		\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY		\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY	\
-	 || (type) == V4L2_BUF_TYPE_VBI_OUTPUT			\
-	 || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-
-enum v4l2_tuner_type {
-	V4L2_TUNER_RADIO	     = 1,
-	V4L2_TUNER_ANALOG_TV	     = 2,
-	V4L2_TUNER_DIGITAL_TV	     = 3,
-};
-
-enum v4l2_memory {
-	V4L2_MEMORY_MMAP             = 1,
-	V4L2_MEMORY_USERPTR          = 2,
-	V4L2_MEMORY_OVERLAY          = 3,
-};
-
-/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
-enum v4l2_colorspace {
-	/* ITU-R 601 -- broadcast NTSC/PAL */
-	V4L2_COLORSPACE_SMPTE170M     = 1,
-
-	/* 1125-Line (US) HDTV */
-	V4L2_COLORSPACE_SMPTE240M     = 2,
-
-	/* HD and modern captures. */
-	V4L2_COLORSPACE_REC709        = 3,
-
-	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
-	V4L2_COLORSPACE_BT878         = 4,
-
-	/* These should be useful.  Assume 601 extents. */
-	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
-	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
-
-	/* I know there will be cameras that send this.  So, this is
-	 * unspecified chromaticities and full 0-255 on each of the
-	 * Y'CbCr components
-	 */
-	V4L2_COLORSPACE_JPEG          = 7,
-
-	/* For RGB colourspaces, this is probably a good start. */
-	V4L2_COLORSPACE_SRGB          = 8,
-};
-
-enum v4l2_priority {
-	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
-	V4L2_PRIORITY_BACKGROUND  = 1,
-	V4L2_PRIORITY_INTERACTIVE = 2,
-	V4L2_PRIORITY_RECORD      = 3,
-	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
-};
-
-struct v4l2_rect {
-	__s32   left;
-	__s32   top;
-	__s32   width;
-	__s32   height;
-};
-
-struct v4l2_fract {
-	__u32   numerator;
-	__u32   denominator;
-};
-
-/**
-  * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
-  *
-  * @driver:	   name of the driver module (e.g. "bttv")
-  * @card:	   name of the card (e.g. "Hauppauge WinTV")
-  * @bus_info:	   name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
-  * @version:	   KERNEL_VERSION
-  * @capabilities: capabilities of the physical device as a whole
-  * @device_caps:  capabilities accessed via this particular device (node)
-  * @reserved:	   reserved fields for future extensions
-  */
-struct v4l2_capability {
-	__u8	driver[16];
-	__u8	card[32];
-	__u8	bus_info[32];
-	__u32   version;
-	__u32	capabilities;
-	__u32	device_caps;
-	__u32	reserved[3];
-};
-
-/* Values for 'capabilities' field */
-#define V4L2_CAP_VIDEO_CAPTURE		0x00000001  /* Is a video capture device */
-#define V4L2_CAP_VIDEO_OUTPUT		0x00000002  /* Is a video output device */
-#define V4L2_CAP_VIDEO_OVERLAY		0x00000004  /* Can do video overlay */
-#define V4L2_CAP_VBI_CAPTURE		0x00000010  /* Is a raw VBI capture device */
-#define V4L2_CAP_VBI_OUTPUT		0x00000020  /* Is a raw VBI output device */
-#define V4L2_CAP_SLICED_VBI_CAPTURE	0x00000040  /* Is a sliced VBI capture device */
-#define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
-#define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
-#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
-#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
-#define V4L2_CAP_RDS_OUTPUT		0x00000800  /* Is an RDS encoder */
-
-/* Is a video capture device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_CAPTURE_MPLANE	0x00001000
-/* Is a video output device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_OUTPUT_MPLANE	0x00002000
-/* Is a video mem-to-mem device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_M2M_MPLANE	0x00004000
-/* Is a video mem-to-mem device */
-#define V4L2_CAP_VIDEO_M2M		0x00008000
-
-#define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
-#define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
-#define V4L2_CAP_RADIO			0x00040000  /* is a radio device */
-#define V4L2_CAP_MODULATOR		0x00080000  /* has a modulator */
-
-#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
-#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
-#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
-
-#define V4L2_CAP_DEVICE_CAPS            0x80000000  /* sets device capabilities field */
-
-/*
- *	V I D E O   I M A G E   F O R M A T
- */
-struct v4l2_pix_format {
-	__u32         		width;
-	__u32			height;
-	__u32			pixelformat;
-	__u32			field;		/* enum v4l2_field */
-	__u32            	bytesperline;	/* for padding, zero if unused */
-	__u32          		sizeimage;
-	__u32			colorspace;	/* enum v4l2_colorspace */
-	__u32			priv;		/* private data, depends on pixelformat */
-};
-
-/*      Pixel format         FOURCC                          depth  Description  */
-
-/* RGB formats */
-#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
-#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
-#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
-#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
-#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
-#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
-#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
-#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
-
-/* Grey formats */
-#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
-#define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
-#define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
-#define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
-#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
-#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
-
-/* Grey bit-packed formats */
-#define V4L2_PIX_FMT_Y10BPACK    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
-
-/* Palette formats */
-#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
-
-/* Luminance+Chrominance formats */
-#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
-#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
-#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
-#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_VYUY    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
-#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
-#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
-#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
-#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
-#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
-#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
-#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
-#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
-#define V4L2_PIX_FMT_M420    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
-
-/* two planes -- one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
-#define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
-#define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
-#define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
-#define V4L2_PIX_FMT_NV42    v4l2_fourcc('N', 'V', '4', '2') /* 24  Y/CrCb 4:4:4  */
-
-/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21M   v4l2_fourcc('N', 'M', '2', '1') /* 21  Y/CrCb 4:2:0  */
-#define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
-#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 16x16 macroblocks */
-
-/* three non contiguous planes - Y, Cb, Cr */
-#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
-#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12  YVU420 planar */
-
-/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB8  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
-	/* 10bit raw bayer DPCM compressed to 8 bits */
-#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
-#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
-#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
-#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
-	/*
-	 * 10bit raw bayer, expanded to 16 bits
-	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
-	 */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
-
-/* compressed formats */
-#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
-#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
-#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
-#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
-#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
-#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
-#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
-#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
-#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
-#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
-#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
-#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
-#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
-#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
-#define V4L2_PIX_FMT_VP8      v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
-
-/*  Vendor-specific formats   */
-#define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
-#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
-#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
-#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
-#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
-#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
-#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
-#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
-#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
-#define V4L2_PIX_FMT_TM6000   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
-#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
-#define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
-#define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
-#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
-#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
-
-/*
- *	F O R M A T   E N U M E R A T I O N
- */
-struct v4l2_fmtdesc {
-	__u32		    index;             /* Format number      */
-	__u32		    type;              /* enum v4l2_buf_type */
-	__u32               flags;
-	__u8		    description[32];   /* Description string */
-	__u32		    pixelformat;       /* Format fourcc      */
-	__u32		    reserved[4];
-};
-
-#define V4L2_FMT_FLAG_COMPRESSED 0x0001
-#define V4L2_FMT_FLAG_EMULATED   0x0002
-
-#if 1
-	/* Experimental Frame Size and frame rate enumeration */
-/*
- *	F R A M E   S I Z E   E N U M E R A T I O N
- */
-enum v4l2_frmsizetypes {
-	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
-	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
-	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
-};
-
-struct v4l2_frmsize_discrete {
-	__u32			width;		/* Frame width [pixel] */
-	__u32			height;		/* Frame height [pixel] */
-};
-
-struct v4l2_frmsize_stepwise {
-	__u32			min_width;	/* Minimum frame width [pixel] */
-	__u32			max_width;	/* Maximum frame width [pixel] */
-	__u32			step_width;	/* Frame width step size [pixel] */
-	__u32			min_height;	/* Minimum frame height [pixel] */
-	__u32			max_height;	/* Maximum frame height [pixel] */
-	__u32			step_height;	/* Frame height step size [pixel] */
-};
-
-struct v4l2_frmsizeenum {
-	__u32			index;		/* Frame size number */
-	__u32			pixel_format;	/* Pixel format */
-	__u32			type;		/* Frame size type the device supports. */
-
-	union {					/* Frame size */
-		struct v4l2_frmsize_discrete	discrete;
-		struct v4l2_frmsize_stepwise	stepwise;
-	};
-
-	__u32   reserved[2];			/* Reserved space for future use */
-};
-
-/*
- *	F R A M E   R A T E   E N U M E R A T I O N
- */
-enum v4l2_frmivaltypes {
-	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
-	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
-	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
-};
-
-struct v4l2_frmival_stepwise {
-	struct v4l2_fract	min;		/* Minimum frame interval [s] */
-	struct v4l2_fract	max;		/* Maximum frame interval [s] */
-	struct v4l2_fract	step;		/* Frame interval step size [s] */
-};
-
-struct v4l2_frmivalenum {
-	__u32			index;		/* Frame format index */
-	__u32			pixel_format;	/* Pixel format */
-	__u32			width;		/* Frame width */
-	__u32			height;		/* Frame height */
-	__u32			type;		/* Frame interval type the device supports. */
-
-	union {					/* Frame interval */
-		struct v4l2_fract		discrete;
-		struct v4l2_frmival_stepwise	stepwise;
-	};
-
-	__u32	reserved[2];			/* Reserved space for future use */
-};
-#endif
-
-/*
- *	T I M E C O D E
- */
-struct v4l2_timecode {
-	__u32	type;
-	__u32	flags;
-	__u8	frames;
-	__u8	seconds;
-	__u8	minutes;
-	__u8	hours;
-	__u8	userbits[4];
-};
-
-/*  Type  */
-#define V4L2_TC_TYPE_24FPS		1
-#define V4L2_TC_TYPE_25FPS		2
-#define V4L2_TC_TYPE_30FPS		3
-#define V4L2_TC_TYPE_50FPS		4
-#define V4L2_TC_TYPE_60FPS		5
-
-/*  Flags  */
-#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
-#define V4L2_TC_FLAG_COLORFRAME		0x0002
-#define V4L2_TC_USERBITS_field		0x000C
-#define V4L2_TC_USERBITS_USERDEFINED	0x0000
-#define V4L2_TC_USERBITS_8BITCHARS	0x0008
-/* The above is based on SMPTE timecodes */
-
-struct v4l2_jpegcompression {
-	int quality;
-
-	int  APPn;              /* Number of APP segment to be written,
-				 * must be 0..15 */
-	int  APP_len;           /* Length of data in JPEG APPn segment */
-	char APP_data[60];      /* Data in the JPEG APPn segment. */
-
-	int  COM_len;           /* Length of data in JPEG COM segment */
-	char COM_data[60];      /* Data in JPEG COM segment */
-
-	__u32 jpeg_markers;     /* Which markers should go into the JPEG
-				 * output. Unless you exactly know what
-				 * you do, leave them untouched.
-				 * Inluding less markers will make the
-				 * resulting code smaller, but there will
-				 * be fewer applications which can read it.
-				 * The presence of the APP and COM marker
-				 * is influenced by APP_len and COM_len
-				 * ONLY, not by this property! */
-
-#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
-#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
-#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
-#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
-#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
-					* allways use APP0 */
-};
-
-/*
- *	M E M O R Y - M A P P I N G   B U F F E R S
- */
-struct v4l2_requestbuffers {
-	__u32			count;
-	__u32			type;		/* enum v4l2_buf_type */
-	__u32			memory;		/* enum v4l2_memory */
-	__u32			reserved[2];
-};
-
-/**
- * struct v4l2_plane - plane info for multi-planar buffers
- * @bytesused:		number of bytes occupied by data in the plane (payload)
- * @length:		size of this plane (NOT the payload) in bytes
- * @mem_offset:		when memory in the associated struct v4l2_buffer is
- *			V4L2_MEMORY_MMAP, equals the offset from the start of
- *			the device memory for this plane (or is a "cookie" that
- *			should be passed to mmap() called on the video node)
- * @userptr:		when memory is V4L2_MEMORY_USERPTR, a userspace pointer
- *			pointing to this plane
- * @data_offset:	offset in the plane to the start of data; usually 0,
- *			unless there is a header in front of the data
- *
- * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
- * with two planes can have one plane for Y, and another for interleaved CbCr
- * components. Each plane can reside in a separate memory buffer, or even in
- * a completely separate memory node (e.g. in embedded devices).
- */
-struct v4l2_plane {
-	__u32			bytesused;
-	__u32			length;
-	union {
-		__u32		mem_offset;
-		unsigned long	userptr;
-	} m;
-	__u32			data_offset;
-	__u32			reserved[11];
-};
-
-/**
- * struct v4l2_buffer - video buffer info
- * @index:	id number of the buffer
- * @type:	enum v4l2_buf_type; buffer type (type == *_MPLANE for
- *		multiplanar buffers);
- * @bytesused:	number of bytes occupied by data in the buffer (payload);
- *		unused (set to 0) for multiplanar buffers
- * @flags:	buffer informational flags
- * @field:	enum v4l2_field; field order of the image in the buffer
- * @timestamp:	frame timestamp
- * @timecode:	frame timecode
- * @sequence:	sequence count of this frame
- * @memory:	enum v4l2_memory; the method, in which the actual video data is
- *		passed
- * @offset:	for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
- *		offset from the start of the device memory for this plane,
- *		(or a "cookie" that should be passed to mmap() as offset)
- * @userptr:	for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
- *		a userspace pointer pointing to this buffer
- * @planes:	for multiplanar buffers; userspace pointer to the array of plane
- *		info structs for this buffer
- * @length:	size in bytes of the buffer (NOT its payload) for single-plane
- *		buffers (when type != *_MPLANE); number of elements in the
- *		planes array for multi-plane buffers
- * @input:	input number from which the video data has has been captured
- *
- * Contains data exchanged by application and driver using one of the Streaming
- * I/O methods.
- */
-struct v4l2_buffer {
-	__u32			index;
-	__u32			type;
-	__u32			bytesused;
-	__u32			flags;
-	__u32			field;
-	struct timeval		timestamp;
-	struct v4l2_timecode	timecode;
-	__u32			sequence;
-
-	/* memory location */
-	__u32			memory;
-	union {
-		__u32           offset;
-		unsigned long   userptr;
-		struct v4l2_plane *planes;
-	} m;
-	__u32			length;
-	__u32			reserved2;
-	__u32			reserved;
-};
-
-/*  Flags for 'flags' field */
-#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
-#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
-#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
-#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
-#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
-#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
-/* Buffer is ready, but the data contained within is corrupted. */
-#define V4L2_BUF_FLAG_ERROR	0x0040
-#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
-#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
-/* Cache handling flags */
-#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
-#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
-
-/*
- *	O V E R L A Y   P R E V I E W
- */
-struct v4l2_framebuffer {
-	__u32			capability;
-	__u32			flags;
-/* FIXME: in theory we should pass something like PCI device + memory
- * region + offset instead of some physical address */
-	void                    *base;
-	struct v4l2_pix_format	fmt;
-};
-/*  Flags for the 'capability' field. Read only */
-#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
-#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
-#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
-#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
-#define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
-#define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
-#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
-#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
-/*  Flags for the 'flags' field. */
-#define V4L2_FBUF_FLAG_PRIMARY		0x0001
-#define V4L2_FBUF_FLAG_OVERLAY		0x0002
-#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
-#define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
-#define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
-#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
-#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040
-
-struct v4l2_clip {
-	struct v4l2_rect        c;
-	struct v4l2_clip	__user *next;
-};
-
-struct v4l2_window {
-	struct v4l2_rect        w;
-	__u32			field;	 /* enum v4l2_field */
-	__u32			chromakey;
-	struct v4l2_clip	__user *clips;
-	__u32			clipcount;
-	void			__user *bitmap;
-	__u8                    global_alpha;
-};
-
-/*
- *	C A P T U R E   P A R A M E T E R S
- */
-struct v4l2_captureparm {
-	__u32		   capability;	  /*  Supported modes */
-	__u32		   capturemode;	  /*  Current mode */
-	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
-	__u32		   extendedmode;  /*  Driver-specific extensions */
-	__u32              readbuffers;   /*  # of buffers for read */
-	__u32		   reserved[4];
-};
-
-/*  Flags for 'capability' and 'capturemode' fields */
-#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
-#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
-
-struct v4l2_outputparm {
-	__u32		   capability;	 /*  Supported modes */
-	__u32		   outputmode;	 /*  Current mode */
-	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
-	__u32		   extendedmode; /*  Driver-specific extensions */
-	__u32              writebuffers; /*  # of buffers for write */
-	__u32		   reserved[4];
-};
-
-/*
- *	I N P U T   I M A G E   C R O P P I N G
- */
-struct v4l2_cropcap {
-	__u32			type;	/* enum v4l2_buf_type */
-	struct v4l2_rect        bounds;
-	struct v4l2_rect        defrect;
-	struct v4l2_fract       pixelaspect;
-};
-
-struct v4l2_crop {
-	__u32			type;	/* enum v4l2_buf_type */
-	struct v4l2_rect        c;
-};
-
-/**
- * struct v4l2_selection - selection info
- * @type:	buffer type (do not use *_MPLANE types)
- * @target:	Selection target, used to choose one of possible rectangles;
- *		defined in v4l2-common.h; V4L2_SEL_TGT_* .
- * @flags:	constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
- * @r:		coordinates of selection window
- * @reserved:	for future use, rounds structure size to 64 bytes, set to zero
- *
- * Hardware may use multiple helper windows to process a video stream.
- * The structure is used to exchange this selection areas between
- * an application and a driver.
- */
-struct v4l2_selection {
-	__u32			type;
-	__u32			target;
-	__u32                   flags;
-	struct v4l2_rect        r;
-	__u32                   reserved[9];
-};
-
-
-/*
- *      A N A L O G   V I D E O   S T A N D A R D
- */
-
-typedef __u64 v4l2_std_id;
-
-/* one bit for each */
-#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
-#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
-#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
-#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
-#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
-#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
-#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
-#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
-
-#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
-#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
-#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
-#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
-
-#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)	/* BTSC */
-#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)	/* EIA-J */
-#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
-#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)	/* FM A2 */
-
-#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
-#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
-#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
-#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
-#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
-#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
-#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
-#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
-
-/* ATSC/HDTV */
-#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
-#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
-
-/* FIXME:
-   Although std_id is 64 bits, there is an issue on PPC32 architecture that
-   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
-   this value to 32 bits.
-   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
-   it should work fine. However, if needed to add more than two standards,
-   v4l2-common.c should be fixed.
- */
-
-/*
- * Some macros to merge video standards in order to make live easier for the
- * drivers and V4L2 applications
- */
-
-/*
- * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
- * Missing here.
- */
-#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
-				 V4L2_STD_NTSC_M_JP     |\
-				 V4L2_STD_NTSC_M_KR)
-/* Secam macros */
-#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
-				 V4L2_STD_SECAM_K	|\
-				 V4L2_STD_SECAM_K1)
-/* All Secam Standards */
-#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
-				 V4L2_STD_SECAM_G	|\
-				 V4L2_STD_SECAM_H	|\
-				 V4L2_STD_SECAM_DK	|\
-				 V4L2_STD_SECAM_L       |\
-				 V4L2_STD_SECAM_LC)
-/* PAL macros */
-#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
-				 V4L2_STD_PAL_B1	|\
-				 V4L2_STD_PAL_G)
-#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
-				 V4L2_STD_PAL_D1	|\
-				 V4L2_STD_PAL_K)
-/*
- * "Common" PAL - This macro is there to be compatible with the old
- * V4L1 concept of "PAL": /BGDKHI.
- * Several PAL standards are mising here: /M, /N and /Nc
- */
-#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
-				 V4L2_STD_PAL_DK	|\
-				 V4L2_STD_PAL_H		|\
-				 V4L2_STD_PAL_I)
-/* Chroma "agnostic" standards */
-#define V4L2_STD_B		(V4L2_STD_PAL_B		|\
-				 V4L2_STD_PAL_B1	|\
-				 V4L2_STD_SECAM_B)
-#define V4L2_STD_G		(V4L2_STD_PAL_G		|\
-				 V4L2_STD_SECAM_G)
-#define V4L2_STD_H		(V4L2_STD_PAL_H		|\
-				 V4L2_STD_SECAM_H)
-#define V4L2_STD_L		(V4L2_STD_SECAM_L	|\
-				 V4L2_STD_SECAM_LC)
-#define V4L2_STD_GH		(V4L2_STD_G		|\
-				 V4L2_STD_H)
-#define V4L2_STD_DK		(V4L2_STD_PAL_DK	|\
-				 V4L2_STD_SECAM_DK)
-#define V4L2_STD_BG		(V4L2_STD_B		|\
-				 V4L2_STD_G)
-#define V4L2_STD_MN		(V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc	|\
-				 V4L2_STD_NTSC)
-
-/* Standards where MTS/BTSC stereo could be found */
-#define V4L2_STD_MTS		(V4L2_STD_NTSC_M	|\
-				 V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc)
-
-/* Standards for Countries with 60Hz Line frequency */
-#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_60	|\
-				 V4L2_STD_NTSC		|\
-				 V4L2_STD_NTSC_443)
-/* Standards for Countries with 50Hz Line frequency */
-#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc	|\
-				 V4L2_STD_SECAM)
-
-#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
-				 V4L2_STD_ATSC_16_VSB)
-/* Macros with none and all analog standards */
-#define V4L2_STD_UNKNOWN        0
-#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
-				 V4L2_STD_625_50)
-
-struct v4l2_standard {
-	__u32		     index;
-	v4l2_std_id          id;
-	__u8		     name[24];
-	struct v4l2_fract    frameperiod; /* Frames, not fields */
-	__u32		     framelines;
-	__u32		     reserved[4];
-};
-
-/* The DV Preset API is deprecated in favor of the DV Timings API.
-   New drivers shouldn't use this anymore! */
-
-/*
- *	V I D E O	T I M I N G S	D V	P R E S E T
- */
-struct v4l2_dv_preset {
-	__u32	preset;
-	__u32	reserved[4];
-};
-
-/*
- *	D V	P R E S E T S	E N U M E R A T I O N
- */
-struct v4l2_dv_enum_preset {
-	__u32	index;
-	__u32	preset;
-	__u8	name[32]; /* Name of the preset timing */
-	__u32	width;
-	__u32	height;
-	__u32	reserved[4];
-};
-
-/*
- * 	D V	P R E S E T	V A L U E S
- */
-#define		V4L2_DV_INVALID		0
-#define		V4L2_DV_480P59_94	1 /* BT.1362 */
-#define		V4L2_DV_576P50		2 /* BT.1362 */
-#define		V4L2_DV_720P24		3 /* SMPTE 296M */
-#define		V4L2_DV_720P25		4 /* SMPTE 296M */
-#define		V4L2_DV_720P30		5 /* SMPTE 296M */
-#define		V4L2_DV_720P50		6 /* SMPTE 296M */
-#define		V4L2_DV_720P59_94	7 /* SMPTE 274M */
-#define		V4L2_DV_720P60		8 /* SMPTE 274M/296M */
-#define		V4L2_DV_1080I29_97	9 /* BT.1120/ SMPTE 274M */
-#define		V4L2_DV_1080I30		10 /* BT.1120/ SMPTE 274M */
-#define		V4L2_DV_1080I25		11 /* BT.1120 */
-#define		V4L2_DV_1080I50		12 /* SMPTE 296M */
-#define		V4L2_DV_1080I60		13 /* SMPTE 296M */
-#define		V4L2_DV_1080P24		14 /* SMPTE 296M */
-#define		V4L2_DV_1080P25		15 /* SMPTE 296M */
-#define		V4L2_DV_1080P30		16 /* SMPTE 296M */
-#define		V4L2_DV_1080P50		17 /* BT.1120 */
-#define		V4L2_DV_1080P60		18 /* BT.1120 */
-
-/*
- *	D V 	B T	T I M I N G S
- */
-
-/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
- * @width:	total width of the active video in pixels
- * @height:	total height of the active video in lines
- * @interlaced:	Interlaced or progressive
- * @polarities:	Positive or negative polarities
- * @pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @hfrontporch:Horizontal front porch in pixels
- * @hsync:	Horizontal Sync length in pixels
- * @hbackporch:	Horizontal back porch in pixels
- * @vfrontporch:Vertical front porch in lines
- * @vsync:	Vertical Sync length in lines
- * @vbackporch:	Vertical back porch in lines
- * @il_vfrontporch:Vertical front porch for the even field
- *		(aka field 2) of interlaced field formats
- * @il_vsync:	Vertical Sync length for the even field
- *		(aka field 2) of interlaced field formats
- * @il_vbackporch:Vertical back porch for the even field
- *		(aka field 2) of interlaced field formats
- * @standards:	Standards the timing belongs to
- * @flags:	Flags
- * @reserved:	Reserved fields, must be zeroed.
- *
- * A note regarding vertical interlaced timings: height refers to the total
- * height of the active video frame (= two fields). The blanking timings refer
- * to the blanking of each field. So the height of the total frame is
- * calculated as follows:
- *
- * tot_height = height + vfrontporch + vsync + vbackporch +
- *                       il_vfrontporch + il_vsync + il_vbackporch
- *
- * The active height of each field is height / 2.
- */
-struct v4l2_bt_timings {
-	__u32	width;
-	__u32	height;
-	__u32	interlaced;
-	__u32	polarities;
-	__u64	pixelclock;
-	__u32	hfrontporch;
-	__u32	hsync;
-	__u32	hbackporch;
-	__u32	vfrontporch;
-	__u32	vsync;
-	__u32	vbackporch;
-	__u32	il_vfrontporch;
-	__u32	il_vsync;
-	__u32	il_vbackporch;
-	__u32	standards;
-	__u32	flags;
-	__u32	reserved[14];
-} __attribute__ ((packed));
-
-/* Interlaced or progressive format */
-#define	V4L2_DV_PROGRESSIVE	0
-#define	V4L2_DV_INTERLACED	1
-
-/* Polarities. If bit is not set, it is assumed to be negative polarity */
-#define V4L2_DV_VSYNC_POS_POL	0x00000001
-#define V4L2_DV_HSYNC_POS_POL	0x00000002
-
-/* Timings standards */
-#define V4L2_DV_BT_STD_CEA861	(1 << 0)  /* CEA-861 Digital TV Profile */
-#define V4L2_DV_BT_STD_DMT	(1 << 1)  /* VESA Discrete Monitor Timings */
-#define V4L2_DV_BT_STD_CVT	(1 << 2)  /* VESA Coordinated Video Timings */
-#define V4L2_DV_BT_STD_GTF	(1 << 3)  /* VESA Generalized Timings Formula */
-
-/* Flags */
-
-/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
-   GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
-   intervals are reduced, allowing a higher resolution over the same
-   bandwidth. This is a read-only flag. */
-#define V4L2_DV_FL_REDUCED_BLANKING		(1 << 0)
-/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
-   of six. These formats can be optionally played at 1 / 1.001 speed.
-   This is a read-only flag. */
-#define V4L2_DV_FL_CAN_REDUCE_FPS		(1 << 1)
-/* CEA-861 specific: only valid for video transmitters, the flag is cleared
-   by receivers.
-   If the framerate of the format is a multiple of six, then the pixelclock
-   used to set up the transmitter is divided by 1.001 to make it compatible
-   with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
-   29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
-   such frequencies, then the flag will also be cleared. */
-#define V4L2_DV_FL_REDUCED_FPS			(1 << 2)
-/* Specific to interlaced formats: if set, then field 1 is really one half-line
-   longer and field 2 is really one half-line shorter, so each field has
-   exactly the same number of half-lines. Whether half-lines can be detected
-   or used depends on the hardware. */
-#define V4L2_DV_FL_HALF_LINE			(1 << 0)
-
-
-/** struct v4l2_dv_timings - DV timings
- * @type:	the type of the timings
- * @bt:	BT656/1120 timings
- */
-struct v4l2_dv_timings {
-	__u32 type;
-	union {
-		struct v4l2_bt_timings	bt;
-		__u32	reserved[32];
-	};
-} __attribute__ ((packed));
-
-/* Values for the type field */
-#define V4L2_DV_BT_656_1120	0	/* BT.656/1120 timing type */
-
-
-/** struct v4l2_enum_dv_timings - DV timings enumeration
- * @index:	enumeration index
- * @reserved:	must be zeroed
- * @timings:	the timings for the given index
- */
-struct v4l2_enum_dv_timings {
-	__u32 index;
-	__u32 reserved[3];
-	struct v4l2_dv_timings timings;
-};
-
-/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
- * @min_width:		width in pixels
- * @max_width:		width in pixels
- * @min_height:		height in lines
- * @max_height:		height in lines
- * @min_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @max_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @standards:		Supported standards
- * @capabilities:	Supported capabilities
- * @reserved:		Must be zeroed
- */
-struct v4l2_bt_timings_cap {
-	__u32	min_width;
-	__u32	max_width;
-	__u32	min_height;
-	__u32	max_height;
-	__u64	min_pixelclock;
-	__u64	max_pixelclock;
-	__u32	standards;
-	__u32	capabilities;
-	__u32	reserved[16];
-} __attribute__ ((packed));
-
-/* Supports interlaced formats */
-#define V4L2_DV_BT_CAP_INTERLACED	(1 << 0)
-/* Supports progressive formats */
-#define V4L2_DV_BT_CAP_PROGRESSIVE	(1 << 1)
-/* Supports CVT/GTF reduced blanking */
-#define V4L2_DV_BT_CAP_REDUCED_BLANKING	(1 << 2)
-/* Supports custom formats */
-#define V4L2_DV_BT_CAP_CUSTOM		(1 << 3)
-
-/** struct v4l2_dv_timings_cap - DV timings capabilities
- * @type:	the type of the timings (same as in struct v4l2_dv_timings)
- * @bt:		the BT656/1120 timings capabilities
- */
-struct v4l2_dv_timings_cap {
-	__u32 type;
-	__u32 reserved[3];
-	union {
-		struct v4l2_bt_timings_cap bt;
-		__u32 raw_data[32];
-	};
-};
-
-
-/*
- *	V I D E O   I N P U T S
- */
-struct v4l2_input {
-	__u32	     index;		/*  Which input */
-	__u8	     name[32];		/*  Label */
-	__u32	     type;		/*  Type of input */
-	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32        tuner;             /*  enum v4l2_tuner_type */
-	v4l2_std_id  std;
-	__u32	     status;
-	__u32	     capabilities;
-	__u32	     reserved[3];
-};
-
-/*  Values for the 'type' field */
-#define V4L2_INPUT_TYPE_TUNER		1
-#define V4L2_INPUT_TYPE_CAMERA		2
-
-/* field 'status' - general */
-#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
-#define V4L2_IN_ST_NO_SIGNAL   0x00000002
-#define V4L2_IN_ST_NO_COLOR    0x00000004
-
-/* field 'status' - sensor orientation */
-/* If sensor is mounted upside down set both bits */
-#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
-#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
-
-/* field 'status' - analog */
-#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
-#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
-
-/* field 'status' - digital */
-#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
-#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
-#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
-
-/* field 'status' - VCR and set-top box */
-#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
-#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
-#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
-
-/* capabilities flags */
-#define V4L2_IN_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_IN_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_IN_CAP_CUSTOM_TIMINGS	V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_IN_CAP_STD			0x00000004 /* Supports S_STD */
-
-/*
- *	V I D E O   O U T P U T S
- */
-struct v4l2_output {
-	__u32	     index;		/*  Which output */
-	__u8	     name[32];		/*  Label */
-	__u32	     type;		/*  Type of output */
-	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32	     modulator;         /*  Associated modulator */
-	v4l2_std_id  std;
-	__u32	     capabilities;
-	__u32	     reserved[3];
-};
-/*  Values for the 'type' field */
-#define V4L2_OUTPUT_TYPE_MODULATOR		1
-#define V4L2_OUTPUT_TYPE_ANALOG			2
-#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
-
-/* capabilities flags */
-#define V4L2_OUT_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_OUT_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_OUT_CAP_CUSTOM_TIMINGS	V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_OUT_CAP_STD		0x00000004 /* Supports S_STD */
-
-/*
- *	C O N T R O L S
- */
-struct v4l2_control {
-	__u32		     id;
-	__s32		     value;
-};
-
-struct v4l2_ext_control {
-	__u32 id;
-	__u32 size;
-	__u32 reserved2[1];
-	union {
-		__s32 value;
-		__s64 value64;
-		char *string;
-	};
-} __attribute__ ((packed));
-
-struct v4l2_ext_controls {
-	__u32 ctrl_class;
-	__u32 count;
-	__u32 error_idx;
-	__u32 reserved[2];
-	struct v4l2_ext_control *controls;
-};
-
-#define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
-#define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
-#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
-
-enum v4l2_ctrl_type {
-	V4L2_CTRL_TYPE_INTEGER	     = 1,
-	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
-	V4L2_CTRL_TYPE_MENU	     = 3,
-	V4L2_CTRL_TYPE_BUTTON	     = 4,
-	V4L2_CTRL_TYPE_INTEGER64     = 5,
-	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
-	V4L2_CTRL_TYPE_STRING        = 7,
-	V4L2_CTRL_TYPE_BITMASK       = 8,
-	V4L2_CTRL_TYPE_INTEGER_MENU = 9,
-};
-
-/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl {
-	__u32		     id;
-	__u32		     type;	/* enum v4l2_ctrl_type */
-	__u8		     name[32];	/* Whatever */
-	__s32		     minimum;	/* Note signedness */
-	__s32		     maximum;
-	__s32		     step;
-	__s32		     default_value;
-	__u32                flags;
-	__u32		     reserved[2];
-};
-
-/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu {
-	__u32		id;
-	__u32		index;
-	union {
-		__u8	name[32];	/* Whatever */
-		__s64	value;
-	};
-	__u32		reserved;
-} __attribute__ ((packed));
-
-/*  Control flags  */
-#define V4L2_CTRL_FLAG_DISABLED		0x0001
-#define V4L2_CTRL_FLAG_GRABBED		0x0002
-#define V4L2_CTRL_FLAG_READ_ONLY 	0x0004
-#define V4L2_CTRL_FLAG_UPDATE 		0x0008
-#define V4L2_CTRL_FLAG_INACTIVE 	0x0010
-#define V4L2_CTRL_FLAG_SLIDER 		0x0020
-#define V4L2_CTRL_FLAG_WRITE_ONLY 	0x0040
-#define V4L2_CTRL_FLAG_VOLATILE		0x0080
-
-/*  Query flag, to be ORed with the control ID */
-#define V4L2_CTRL_FLAG_NEXT_CTRL	0x80000000
-
-/*  User-class control IDs defined by V4L2 */
-#define V4L2_CID_MAX_CTRLS		1024
-/*  IDs reserved for driver specific controls */
-#define V4L2_CID_PRIVATE_BASE		0x08000000
-
-
-/*  DV-class control IDs defined by V4L2 */
-#define V4L2_CID_DV_CLASS_BASE			(V4L2_CTRL_CLASS_DV | 0x900)
-#define V4L2_CID_DV_CLASS			(V4L2_CTRL_CLASS_DV | 1)
-
-#define	V4L2_CID_DV_TX_HOTPLUG			(V4L2_CID_DV_CLASS_BASE + 1)
-#define	V4L2_CID_DV_TX_RXSENSE			(V4L2_CID_DV_CLASS_BASE + 2)
-#define	V4L2_CID_DV_TX_EDID_PRESENT		(V4L2_CID_DV_CLASS_BASE + 3)
-#define	V4L2_CID_DV_TX_MODE			(V4L2_CID_DV_CLASS_BASE + 4)
-enum v4l2_dv_tx_mode {
-	V4L2_DV_TX_MODE_DVI_D	= 0,
-	V4L2_DV_TX_MODE_HDMI	= 1,
-};
-#define V4L2_CID_DV_TX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 5)
-enum v4l2_dv_rgb_range {
-	V4L2_DV_RGB_RANGE_AUTO	  = 0,
-	V4L2_DV_RGB_RANGE_LIMITED = 1,
-	V4L2_DV_RGB_RANGE_FULL	  = 2,
-};
-
-#define	V4L2_CID_DV_RX_POWER_PRESENT		(V4L2_CID_DV_CLASS_BASE + 100)
-#define V4L2_CID_DV_RX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 101)
-
-/*
- *	T U N I N G
- */
-struct v4l2_tuner {
-	__u32                   index;
-	__u8			name[32];
-	__u32			type;	/* enum v4l2_tuner_type */
-	__u32			capability;
-	__u32			rangelow;
-	__u32			rangehigh;
-	__u32			rxsubchans;
-	__u32			audmode;
-	__s32			signal;
-	__s32			afc;
-	__u32			reserved[4];
-};
-
-struct v4l2_modulator {
-	__u32			index;
-	__u8			name[32];
-	__u32			capability;
-	__u32			rangelow;
-	__u32			rangehigh;
-	__u32			txsubchans;
-	__u32			reserved[4];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_TUNER_CAP_LOW		0x0001
-#define V4L2_TUNER_CAP_NORM		0x0002
-#define V4L2_TUNER_CAP_HWSEEK_BOUNDED	0x0004
-#define V4L2_TUNER_CAP_HWSEEK_WRAP	0x0008
-#define V4L2_TUNER_CAP_STEREO		0x0010
-#define V4L2_TUNER_CAP_LANG2		0x0020
-#define V4L2_TUNER_CAP_SAP		0x0020
-#define V4L2_TUNER_CAP_LANG1		0x0040
-#define V4L2_TUNER_CAP_RDS		0x0080
-#define V4L2_TUNER_CAP_RDS_BLOCK_IO	0x0100
-#define V4L2_TUNER_CAP_RDS_CONTROLS	0x0200
-#define V4L2_TUNER_CAP_FREQ_BANDS	0x0400
-#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM	0x0800
-
-/*  Flags for the 'rxsubchans' field */
-#define V4L2_TUNER_SUB_MONO		0x0001
-#define V4L2_TUNER_SUB_STEREO		0x0002
-#define V4L2_TUNER_SUB_LANG2		0x0004
-#define V4L2_TUNER_SUB_SAP		0x0004
-#define V4L2_TUNER_SUB_LANG1		0x0008
-#define V4L2_TUNER_SUB_RDS		0x0010
-
-/*  Values for the 'audmode' field */
-#define V4L2_TUNER_MODE_MONO		0x0000
-#define V4L2_TUNER_MODE_STEREO		0x0001
-#define V4L2_TUNER_MODE_LANG2		0x0002
-#define V4L2_TUNER_MODE_SAP		0x0002
-#define V4L2_TUNER_MODE_LANG1		0x0003
-#define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
-
-struct v4l2_frequency {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	frequency;
-	__u32	reserved[8];
-};
-
-#define V4L2_BAND_MODULATION_VSB	(1 << 1)
-#define V4L2_BAND_MODULATION_FM		(1 << 2)
-#define V4L2_BAND_MODULATION_AM		(1 << 3)
-
-struct v4l2_frequency_band {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	index;
-	__u32	capability;
-	__u32	rangelow;
-	__u32	rangehigh;
-	__u32	modulation;
-	__u32	reserved[9];
-};
-
-struct v4l2_hw_freq_seek {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	seek_upward;
-	__u32	wrap_around;
-	__u32	spacing;
-	__u32	rangelow;
-	__u32	rangehigh;
-	__u32	reserved[5];
-};
-
-/*
- *	R D S
- */
-
-struct v4l2_rds_data {
-	__u8 	lsb;
-	__u8 	msb;
-	__u8 	block;
-} __attribute__ ((packed));
-
-#define V4L2_RDS_BLOCK_MSK 	 0x7
-#define V4L2_RDS_BLOCK_A 	 0
-#define V4L2_RDS_BLOCK_B 	 1
-#define V4L2_RDS_BLOCK_C 	 2
-#define V4L2_RDS_BLOCK_D 	 3
-#define V4L2_RDS_BLOCK_C_ALT 	 4
-#define V4L2_RDS_BLOCK_INVALID 	 7
-
-#define V4L2_RDS_BLOCK_CORRECTED 0x40
-#define V4L2_RDS_BLOCK_ERROR 	 0x80
-
-/*
- *	A U D I O
- */
-struct v4l2_audio {
-	__u32	index;
-	__u8	name[32];
-	__u32	capability;
-	__u32	mode;
-	__u32	reserved[2];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_AUDCAP_STEREO		0x00001
-#define V4L2_AUDCAP_AVL			0x00002
-
-/*  Flags for the 'mode' field */
-#define V4L2_AUDMODE_AVL		0x00001
-
-struct v4l2_audioout {
-	__u32	index;
-	__u8	name[32];
-	__u32	capability;
-	__u32	mode;
-	__u32	reserved[2];
-};
-
-/*
- *	M P E G   S E R V I C E S
- *
- *	NOTE: EXPERIMENTAL API
- */
-#if 1
-#define V4L2_ENC_IDX_FRAME_I    (0)
-#define V4L2_ENC_IDX_FRAME_P    (1)
-#define V4L2_ENC_IDX_FRAME_B    (2)
-#define V4L2_ENC_IDX_FRAME_MASK (0xf)
-
-struct v4l2_enc_idx_entry {
-	__u64 offset;
-	__u64 pts;
-	__u32 length;
-	__u32 flags;
-	__u32 reserved[2];
-};
-
-#define V4L2_ENC_IDX_ENTRIES (64)
-struct v4l2_enc_idx {
-	__u32 entries;
-	__u32 entries_cap;
-	__u32 reserved[4];
-	struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
-};
-
-
-#define V4L2_ENC_CMD_START      (0)
-#define V4L2_ENC_CMD_STOP       (1)
-#define V4L2_ENC_CMD_PAUSE      (2)
-#define V4L2_ENC_CMD_RESUME     (3)
-
-/* Flags for V4L2_ENC_CMD_STOP */
-#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)
-
-struct v4l2_encoder_cmd {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u32 data[8];
-		} raw;
-	};
-};
-
-/* Decoder commands */
-#define V4L2_DEC_CMD_START       (0)
-#define V4L2_DEC_CMD_STOP        (1)
-#define V4L2_DEC_CMD_PAUSE       (2)
-#define V4L2_DEC_CMD_RESUME      (3)
-
-/* Flags for V4L2_DEC_CMD_START */
-#define V4L2_DEC_CMD_START_MUTE_AUDIO	(1 << 0)
-
-/* Flags for V4L2_DEC_CMD_PAUSE */
-#define V4L2_DEC_CMD_PAUSE_TO_BLACK	(1 << 0)
-
-/* Flags for V4L2_DEC_CMD_STOP */
-#define V4L2_DEC_CMD_STOP_TO_BLACK	(1 << 0)
-#define V4L2_DEC_CMD_STOP_IMMEDIATELY	(1 << 1)
-
-/* Play format requirements (returned by the driver): */
-
-/* The decoder has no special format requirements */
-#define V4L2_DEC_START_FMT_NONE		(0)
-/* The decoder requires full GOPs */
-#define V4L2_DEC_START_FMT_GOP		(1)
-
-/* The structure must be zeroed before use by the application
-   This ensures it can be extended safely in the future. */
-struct v4l2_decoder_cmd {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u64 pts;
-		} stop;
-
-		struct {
-			/* 0 or 1000 specifies normal speed,
-			   1 specifies forward single stepping,
-			   -1 specifies backward single stepping,
-			   >1: playback at speed/1000 of the normal speed,
-			   <-1: reverse playback at (-speed/1000) of the normal speed. */
-			__s32 speed;
-			__u32 format;
-		} start;
-
-		struct {
-			__u32 data[16];
-		} raw;
-	};
-};
-#endif
-
-
-/*
- *	D A T A   S E R V I C E S   ( V B I )
- *
- *	Data services API by Michael Schimek
- */
-
-/* Raw VBI */
-struct v4l2_vbi_format {
-	__u32	sampling_rate;		/* in 1 Hz */
-	__u32	offset;
-	__u32	samples_per_line;
-	__u32	sample_format;		/* V4L2_PIX_FMT_* */
-	__s32	start[2];
-	__u32	count[2];
-	__u32	flags;			/* V4L2_VBI_* */
-	__u32	reserved[2];		/* must be zero */
-};
-
-/*  VBI flags  */
-#define V4L2_VBI_UNSYNC		(1 << 0)
-#define V4L2_VBI_INTERLACED	(1 << 1)
-
-/* Sliced VBI
- *
- *    This implements is a proposal V4L2 API to allow SLICED VBI
- * required for some hardware encoders. It should change without
- * notice in the definitive implementation.
- */
-
-struct v4l2_sliced_vbi_format {
-	__u16   service_set;
-	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-				 (equals frame lines 313-336 for 625 line video
-				  standards, 263-286 for 525 line standards) */
-	__u16   service_lines[2][24];
-	__u32   io_size;
-	__u32   reserved[2];            /* must be zero */
-};
-
-/* Teletext World System Teletext
-   (WST), defined on ITU-R BT.653-2 */
-#define V4L2_SLICED_TELETEXT_B          (0x0001)
-/* Video Program System, defined on ETS 300 231*/
-#define V4L2_SLICED_VPS                 (0x0400)
-/* Closed Caption, defined on EIA-608 */
-#define V4L2_SLICED_CAPTION_525         (0x1000)
-/* Wide Screen System, defined on ITU-R BT1119.1 */
-#define V4L2_SLICED_WSS_625             (0x4000)
-
-#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
-#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
-
-struct v4l2_sliced_vbi_cap {
-	__u16   service_set;
-	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-				 (equals frame lines 313-336 for 625 line video
-				  standards, 263-286 for 525 line standards) */
-	__u16   service_lines[2][24];
-	__u32	type;		/* enum v4l2_buf_type */
-	__u32   reserved[3];    /* must be 0 */
-};
-
-struct v4l2_sliced_vbi_data {
-	__u32   id;
-	__u32   field;          /* 0: first field, 1: second field */
-	__u32   line;           /* 1-23 */
-	__u32   reserved;       /* must be 0 */
-	__u8    data[48];
-};
-
-/*
- * Sliced VBI data inserted into MPEG Streams
- */
-
-/*
- * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
- *
- * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
- * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
- * data
- *
- * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
- * definitions are not included here.  See the MPEG-2 specifications for details
- * on these headers.
- */
-
-/* Line type IDs */
-#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
-#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
-#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
-#define V4L2_MPEG_VBI_IVTV_VPS            (7)
-
-struct v4l2_mpeg_vbi_itv0_line {
-	__u8 id;	/* One of V4L2_MPEG_VBI_IVTV_* above */
-	__u8 data[42];	/* Sliced VBI data for the line */
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_itv0 {
-	__le32 linemask[2]; /* Bitmasks of VBI service lines present */
-	struct v4l2_mpeg_vbi_itv0_line line[35];
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_ITV0 {
-	struct v4l2_mpeg_vbi_itv0_line line[36];
-} __attribute__ ((packed));
-
-#define V4L2_MPEG_VBI_IVTV_MAGIC0	"itv0"
-#define V4L2_MPEG_VBI_IVTV_MAGIC1	"ITV0"
-
-struct v4l2_mpeg_vbi_fmt_ivtv {
-	__u8 magic[4];
-	union {
-		struct v4l2_mpeg_vbi_itv0 itv0;
-		struct v4l2_mpeg_vbi_ITV0 ITV0;
-	};
-} __attribute__ ((packed));
-
-/*
- *	A G G R E G A T E   S T R U C T U R E S
- */
-
-/**
- * struct v4l2_plane_pix_format - additional, per-plane format definition
- * @sizeimage:		maximum size in bytes required for data, for which
- *			this plane will be used
- * @bytesperline:	distance in bytes between the leftmost pixels in two
- *			adjacent lines
- */
-struct v4l2_plane_pix_format {
-	__u32		sizeimage;
-	__u16		bytesperline;
-	__u16		reserved[7];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_pix_format_mplane - multiplanar format definition
- * @width:		image width in pixels
- * @height:		image height in pixels
- * @pixelformat:	little endian four character code (fourcc)
- * @field:		enum v4l2_field; field order (for interlaced video)
- * @colorspace:		enum v4l2_colorspace; supplemental to pixelformat
- * @plane_fmt:		per-plane information
- * @num_planes:		number of planes for this format
- */
-struct v4l2_pix_format_mplane {
-	__u32				width;
-	__u32				height;
-	__u32				pixelformat;
-	__u32				field;
-	__u32				colorspace;
-
-	struct v4l2_plane_pix_format	plane_fmt[VIDEO_MAX_PLANES];
-	__u8				num_planes;
-	__u8				reserved[11];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_format - stream data format
- * @type:	enum v4l2_buf_type; type of the data stream
- * @pix:	definition of an image format
- * @pix_mp:	definition of a multiplanar image format
- * @win:	definition of an overlaid image
- * @vbi:	raw VBI capture or output parameters
- * @sliced:	sliced VBI capture or output parameters
- * @raw_data:	placeholder for future extensions and custom formats
- */
-struct v4l2_format {
-	__u32	 type;
-	union {
-		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
-		struct v4l2_pix_format_mplane	pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
-		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
-		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
-		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
-		__u8	raw_data[200];                   /* user-defined */
-	} fmt;
-};
-
-/*	Stream type-dependent parameters
- */
-struct v4l2_streamparm {
-	__u32	 type;			/* enum v4l2_buf_type */
-	union {
-		struct v4l2_captureparm	capture;
-		struct v4l2_outputparm	output;
-		__u8	raw_data[200];  /* user-defined */
-	} parm;
-};
-
-/*
- *	E V E N T S
- */
-
-#define V4L2_EVENT_ALL				0
-#define V4L2_EVENT_VSYNC			1
-#define V4L2_EVENT_EOS				2
-#define V4L2_EVENT_CTRL				3
-#define V4L2_EVENT_FRAME_SYNC			4
-#define V4L2_EVENT_PRIVATE_START		0x08000000
-
-/* Payload for V4L2_EVENT_VSYNC */
-struct v4l2_event_vsync {
-	/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
-	__u8 field;
-} __attribute__ ((packed));
-
-/* Payload for V4L2_EVENT_CTRL */
-#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
-#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
-
-struct v4l2_event_ctrl {
-	__u32 changes;
-	__u32 type;
-	union {
-		__s32 value;
-		__s64 value64;
-	};
-	__u32 flags;
-	__s32 minimum;
-	__s32 maximum;
-	__s32 step;
-	__s32 default_value;
-};
-
-struct v4l2_event_frame_sync {
-	__u32 frame_sequence;
-};
-
-struct v4l2_event {
-	__u32				type;
-	union {
-		struct v4l2_event_vsync		vsync;
-		struct v4l2_event_ctrl		ctrl;
-		struct v4l2_event_frame_sync	frame_sync;
-		__u8				data[64];
-	} u;
-	__u32				pending;
-	__u32				sequence;
-	struct timespec			timestamp;
-	__u32				id;
-	__u32				reserved[8];
-};
-
-#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
-#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
-
-struct v4l2_event_subscription {
-	__u32				type;
-	__u32				id;
-	__u32				flags;
-	__u32				reserved[5];
-};
-
-/*
- *	A D V A N C E D   D E B U G G I N G
- *
- *	NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
- *	FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
- */
-
-/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
-
-#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
-#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
-#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
-#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
-
-struct v4l2_dbg_match {
-	__u32 type; /* Match type */
-	union {     /* Match this chip, meaning determined by type */
-		__u32 addr;
-		char name[32];
-	};
-} __attribute__ ((packed));
-
-struct v4l2_dbg_register {
-	struct v4l2_dbg_match match;
-	__u32 size;	/* register size in bytes */
-	__u64 reg;
-	__u64 val;
-} __attribute__ ((packed));
-
-/* VIDIOC_DBG_G_CHIP_IDENT */
-struct v4l2_dbg_chip_ident {
-	struct v4l2_dbg_match match;
-	__u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
-	__u32 revision;    /* chip revision, chip specific */
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
- * @index:	on return, index of the first created buffer
- * @count:	entry: number of requested buffers,
- *		return: number of created buffers
- * @memory:	enum v4l2_memory; buffer memory type
- * @format:	frame format, for which buffers are requested
- * @reserved:	future extensions
- */
-struct v4l2_create_buffers {
-	__u32			index;
-	__u32			count;
-	__u32			memory;
-	struct v4l2_format	format;
-	__u32			reserved[8];
-};
-
-/*
- *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
- *
- */
-#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
-#define VIDIOC_RESERVED		  _IO('V',  1)
-#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
-#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
-#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
-#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON		 _IOW('V', 18, int)
-#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
-#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
-#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
-#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
-#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
-#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY	 _IOR('V', 67, __u32) /* enum v4l2_priority */
-#define VIDIOC_S_PRIORITY	 _IOW('V', 68, __u32) /* enum v4l2_priority */
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS         _IO('V', 70)
-#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
-#if 1
-#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
-#endif
-
-#if 1
-/* Experimental, meant for debugging, testing and internal use.
-   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
-   You must be root to use these ioctls. Never use these in applications! */
-#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_dbg_register)
-#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_dbg_register)
-
-/* Experimental, meant for debugging, testing and internal use.
-   Never use this ioctl in applications! */
-#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
-#endif
-
-#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
-
-/* These four DV Preset ioctls are deprecated in favor of the DV Timings
-   ioctls. */
-#define	VIDIOC_ENUM_DV_PRESETS	_IOWR('V', 83, struct v4l2_dv_enum_preset)
-#define	VIDIOC_S_DV_PRESET	_IOWR('V', 84, struct v4l2_dv_preset)
-#define	VIDIOC_G_DV_PRESET	_IOWR('V', 85, struct v4l2_dv_preset)
-#define	VIDIOC_QUERY_DV_PRESET	_IOR('V',  86, struct v4l2_dv_preset)
-#define	VIDIOC_S_DV_TIMINGS	_IOWR('V', 87, struct v4l2_dv_timings)
-#define	VIDIOC_G_DV_TIMINGS	_IOWR('V', 88, struct v4l2_dv_timings)
-#define	VIDIOC_DQEVENT		 _IOR('V', 89, struct v4l2_event)
-#define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
-#define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
-
-/* Experimental, the below two ioctls may change over the next couple of kernel
-   versions */
-#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
-#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
-
-/* Experimental selection API */
-#define VIDIOC_G_SELECTION	_IOWR('V', 94, struct v4l2_selection)
-#define VIDIOC_S_SELECTION	_IOWR('V', 95, struct v4l2_selection)
-
-/* Experimental, these two ioctls may change over the next couple of kernel
-   versions. */
-#define VIDIOC_DECODER_CMD	_IOWR('V', 96, struct v4l2_decoder_cmd)
-#define VIDIOC_TRY_DECODER_CMD	_IOWR('V', 97, struct v4l2_decoder_cmd)
-
-/* Experimental, these three ioctls may change over the next couple of kernel
-   versions. */
-#define VIDIOC_ENUM_DV_TIMINGS  _IOWR('V', 98, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS  _IOR('V', 99, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP   _IOWR('V', 100, struct v4l2_dv_timings_cap)
-
-/* Experimental, this ioctl may change over the next couple of kernel
-   versions. */
-#define VIDIOC_ENUM_FREQ_BANDS	_IOWR('V', 101, struct v4l2_frequency_band)
-
-/* Reminder: when adding new ioctls please add support for them to
-   drivers/media/video/v4l2-compat-ioctl32.c as well! */
-
-#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
+#include <uapi/linux/videodev2.h>
 
 #endif /* __LINUX_VIDEODEV2_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index e2850a7ea2762ef01351c05b38bc31c6db721ab4..29b9104232b40c038bf29969d9c63795e8575fce 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -1,60 +1,10 @@
 #ifndef _LINUX_VIRTIO_CONFIG_H
 #define _LINUX_VIRTIO_CONFIG_H
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-
-/* Virtio devices use a standardized configuration space to define their
- * features and pass configuration information, but each implementation can
- * store and access that space differently. */
-#include <linux/types.h>
-
-/* Status byte for guest to report progress, and synchronize features. */
-/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
-#define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
-/* We have found a driver for the device. */
-#define VIRTIO_CONFIG_S_DRIVER		2
-/* Driver has used its parts of the config, and is happy */
-#define VIRTIO_CONFIG_S_DRIVER_OK	4
-/* We've given up on this device. */
-#define VIRTIO_CONFIG_S_FAILED		0x80
-
-/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
- * transport being used (eg. virtio_ring), the rest are per-device feature
- * bits. */
-#define VIRTIO_TRANSPORT_F_START	28
-#define VIRTIO_TRANSPORT_F_END		32
-
-/* Do we get callbacks when the ring is completely used, even if we've
- * suppressed them? */
-#define VIRTIO_F_NOTIFY_ON_EMPTY	24
 
-#ifdef __KERNEL__
 #include <linux/err.h>
 #include <linux/bug.h>
 #include <linux/virtio.h>
+#include <uapi/linux/virtio_config.h>
 
 /**
  * virtio_config_ops - operations for configuring a virtio device
@@ -213,5 +163,4 @@ int virtqueue_set_affinity(struct virtqueue *vq, int cpu)
 }
 
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index bdf4b0034739e379b4eae94e17171aaca64f3bd0..d2e2785af60260b3466c127155195aa8222ef2f2 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,8 +1,3 @@
-#ifndef _LINUX_VIRTIO_CONSOLE_H
-#define _LINUX_VIRTIO_CONSOLE_H
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
 /*
  * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
  * anyone can use the definitions to implement compatible drivers/servers:
@@ -34,44 +29,10 @@
  * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
  * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
  */
+#ifndef _LINUX_VIRTIO_CONSOLE_H
+#define _LINUX_VIRTIO_CONSOLE_H
 
-/* Feature bits */
-#define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
-#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
-
-#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
-
-struct virtio_console_config {
-	/* colums of the screens */
-	__u16 cols;
-	/* rows of the screens */
-	__u16 rows;
-	/* max. number of ports this device can hold */
-	__u32 max_nr_ports;
-} __attribute__((packed));
-
-/*
- * A message that's passed between the Host and the Guest for a
- * particular port.
- */
-struct virtio_console_control {
-	__u32 id;		/* Port number */
-	__u16 event;		/* The kind of control event (see below) */
-	__u16 value;		/* Extra information for the key */
-};
-
-/* Some events for control messages */
-#define VIRTIO_CONSOLE_DEVICE_READY	0
-#define VIRTIO_CONSOLE_PORT_ADD		1
-#define VIRTIO_CONSOLE_PORT_REMOVE	2
-#define VIRTIO_CONSOLE_PORT_READY	3
-#define VIRTIO_CONSOLE_CONSOLE_PORT	4
-#define VIRTIO_CONSOLE_RESIZE		5
-#define VIRTIO_CONSOLE_PORT_OPEN	6
-#define VIRTIO_CONSOLE_PORT_NAME	7
+#include <uapi/linux/virtio_console.h>
 
-#ifdef __KERNEL__
 int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index c2d793a06ad701ddf2f74e38aff7abee5cdebec0..63c6ea199519305b907c34dc42d82290ec57bb07 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -1,167 +1,9 @@
 #ifndef _LINUX_VIRTIO_RING_H
 #define _LINUX_VIRTIO_RING_H
-/* An interface for efficient virtio implementation, currently for use by KVM
- * and lguest, but hopefully others soon.  Do NOT change this since it will
- * break existing servers and clients.
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright Rusty Russell IBM Corporation 2007. */
-#include <linux/types.h>
 
-/* This marks a buffer as continuing via the next field. */
-#define VRING_DESC_F_NEXT	1
-/* This marks a buffer as write-only (otherwise read-only). */
-#define VRING_DESC_F_WRITE	2
-/* This means the buffer contains a list of buffer descriptors. */
-#define VRING_DESC_F_INDIRECT	4
-
-/* The Host uses this in used->flags to advise the Guest: don't kick me when
- * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
- * will still kick if it's out of buffers. */
-#define VRING_USED_F_NO_NOTIFY	1
-/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
- * when you consume a buffer.  It's unreliable, so it's simply an
- * optimization.  */
-#define VRING_AVAIL_F_NO_INTERRUPT	1
-
-/* We support indirect buffer descriptors */
-#define VIRTIO_RING_F_INDIRECT_DESC	28
-
-/* The Guest publishes the used index for which it expects an interrupt
- * at the end of the avail ring. Host should ignore the avail->flags field. */
-/* The Host publishes the avail index for which it expects a kick
- * at the end of the used ring. Guest should ignore the used->flags field. */
-#define VIRTIO_RING_F_EVENT_IDX		29
-
-/* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
-struct vring_desc {
-	/* Address (guest-physical). */
-	__u64 addr;
-	/* Length. */
-	__u32 len;
-	/* The flags as indicated above. */
-	__u16 flags;
-	/* We chain unused descriptors via this, too */
-	__u16 next;
-};
-
-struct vring_avail {
-	__u16 flags;
-	__u16 idx;
-	__u16 ring[];
-};
-
-/* u32 is used here for ids for padding reasons. */
-struct vring_used_elem {
-	/* Index of start of used descriptor chain. */
-	__u32 id;
-	/* Total length of the descriptor chain which was used (written to) */
-	__u32 len;
-};
-
-struct vring_used {
-	__u16 flags;
-	__u16 idx;
-	struct vring_used_elem ring[];
-};
-
-struct vring {
-	unsigned int num;
-
-	struct vring_desc *desc;
-
-	struct vring_avail *avail;
-
-	struct vring_used *used;
-};
-
-/* The standard layout for the ring is a continuous chunk of memory which looks
- * like this.  We assume num is a power of 2.
- *
- * struct vring
- * {
- *	// The actual descriptors (16 bytes each)
- *	struct vring_desc desc[num];
- *
- *	// A ring of available descriptor heads with free-running index.
- *	__u16 avail_flags;
- *	__u16 avail_idx;
- *	__u16 available[num];
- *	__u16 used_event_idx;
- *
- *	// Padding to the next align boundary.
- *	char pad[];
- *
- *	// A ring of used descriptor heads with free-running index.
- *	__u16 used_flags;
- *	__u16 used_idx;
- *	struct vring_used_elem used[num];
- *	__u16 avail_event_idx;
- * };
- */
-/* We publish the used event index at the end of the available ring, and vice
- * versa. They are at the end for backwards compatibility. */
-#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
-#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
-
-static inline void vring_init(struct vring *vr, unsigned int num, void *p,
-			      unsigned long align)
-{
-	vr->num = num;
-	vr->desc = p;
-	vr->avail = p + num*sizeof(struct vring_desc);
-	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
-		+ align-1) & ~(align - 1));
-}
-
-static inline unsigned vring_size(unsigned int num, unsigned long align)
-{
-	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
-		 + align - 1) & ~(align - 1))
-		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
-}
-
-/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
-/* Assuming a given event_idx value from the other size, if
- * we have just incremented index from old to new_idx,
- * should we trigger an event? */
-static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
-{
-	/* Note: Xen has similar logic for notification hold-off
-	 * in include/xen/interface/io/ring.h with req_event and req_prod
-	 * corresponding to event_idx + 1 and new_idx respectively.
-	 * Note also that req_event and req_prod in Xen start at 1,
-	 * event indexes in virtio start at 0. */
-	return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
-}
-
-#ifdef __KERNEL__
 #include <linux/irqreturn.h>
+#include <uapi/linux/virtio_ring.h>
+
 struct virtio_device;
 struct virtqueue;
 
@@ -179,5 +21,4 @@ void vring_del_virtqueue(struct virtqueue *vq);
 void vring_transport_features(struct virtio_device *vdev);
 
 irqreturn_t vring_interrupt(int irq, void *_vq);
-#endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_RING_H */
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 30a8dd9c83ffe7285ed92054a280b685220d87e8..b186e043523969b016fe12508da9c25000ec0223 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -1,90 +1,8 @@
 #ifndef _LINUX_VT_H
 #define _LINUX_VT_H
 
+#include <uapi/linux/vt.h>
 
-/*
- * These constants are also useful for user-level apps (e.g., VC
- * resizing).
- */
-#define MIN_NR_CONSOLES 1       /* must be at least 1 */
-#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
-#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
-		/* Note: the ioctl VT_GETSTATE does not work for
-		   consoles 16 and higher (since it returns a short) */
-
-/* 0x56 is 'V', to avoid collision with termios and kd */
-
-#define VT_OPENQRY	0x5600	/* find available vt */
-
-struct vt_mode {
-	char mode;		/* vt mode */
-	char waitv;		/* if set, hang on writes if not active */
-	short relsig;		/* signal to raise on release req */
-	short acqsig;		/* signal to raise on acquisition */
-	short frsig;		/* unused (set to 0) */
-};
-#define VT_GETMODE	0x5601	/* get mode of active vt */
-#define VT_SETMODE	0x5602	/* set mode of active vt */
-#define		VT_AUTO		0x00	/* auto vt switching */
-#define		VT_PROCESS	0x01	/* process controls switching */
-#define		VT_ACKACQ	0x02	/* acknowledge switch */
-
-struct vt_stat {
-	unsigned short v_active;	/* active vt */
-	unsigned short v_signal;	/* signal to send */
-	unsigned short v_state;		/* vt bitmask */
-};
-#define VT_GETSTATE	0x5603	/* get global vt state info */
-#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
-
-#define VT_RELDISP	0x5605	/* release display */
-
-#define VT_ACTIVATE	0x5606	/* make vt active */
-#define VT_WAITACTIVE	0x5607	/* wait for vt active */
-#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
-
-struct vt_sizes {
-	unsigned short v_rows;		/* number of rows */
-	unsigned short v_cols;		/* number of columns */
-	unsigned short v_scrollsize;	/* number of lines of scrollback */
-};
-#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
-
-struct vt_consize {
-	unsigned short v_rows;	/* number of rows */
-	unsigned short v_cols;	/* number of columns */
-	unsigned short v_vlin;	/* number of pixel rows on screen */
-	unsigned short v_clin;	/* number of pixel rows per character */
-	unsigned short v_vcol;	/* number of pixel columns on screen */
-	unsigned short v_ccol;	/* number of pixel columns per character */
-};
-#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
-#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
-#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
-#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
-
-struct vt_event {
-	unsigned int event;
-#define VT_EVENT_SWITCH		0x0001	/* Console switch */
-#define VT_EVENT_BLANK		0x0002	/* Screen blank */
-#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
-#define VT_EVENT_RESIZE		0x0008	/* Resize display */
-#define VT_MAX_EVENT		0x000F
-	unsigned int oldev;		/* Old console */
-	unsigned int newev;		/* New console (if changing) */
-	unsigned int pad[4];		/* Padding for expansion */
-};
-
-#define VT_WAITEVENT	0x560E	/* Wait for an event */
-
-struct vt_setactivate {
-	unsigned int console;
-	struct vt_mode mode;
-};
-
-#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
-
-#ifdef __KERNEL__
 
 /* Virtual Terminal events. */
 #define VT_ALLOCATE		0x0001 /* Console got allocated */
@@ -106,8 +24,4 @@ static inline int vt_kmsg_redirect(int new)
 
 #endif
 
-#endif /* __KERNEL__ */
-
-#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
-
 #endif /* _LINUX_VT_H */
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 1dee81c41ff14578c840dcfdf8f449983937267a..168dfe122dd3816c86785a32ce642d3427c79593 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -1,28 +1,12 @@
 #ifndef _LINUX_WAIT_H
 #define _LINUX_WAIT_H
 
-#define WNOHANG		0x00000001
-#define WUNTRACED	0x00000002
-#define WSTOPPED	WUNTRACED
-#define WEXITED		0x00000004
-#define WCONTINUED	0x00000008
-#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
-
-#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
-#define __WALL		0x40000000	/* Wait on all children, regardless of type */
-#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
-
-/* First argument to waitid: */
-#define P_ALL		0
-#define P_PID		1
-#define P_PGID		2
-
-#ifdef __KERNEL__
 
 #include <linux/list.h>
 #include <linux/stddef.h>
 #include <linux/spinlock.h>
 #include <asm/current.h>
+#include <uapi/linux/wait.h>
 
 typedef struct __wait_queue wait_queue_t;
 typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
@@ -663,6 +647,4 @@ static inline int wait_on_bit_lock(void *word, int bit,
 	return out_of_line_wait_on_bit_lock(word, bit, action, mode);
 }
 	
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index 3157cc1fada66f3a986c8a52f762ea54667b6157..cec4b4159767d87bfac6fcb73ba08ac9703eb1fd 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -43,413 +43,11 @@
 * Jan 16, 1997	Gene Kozin	router_devlist made public
 * Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
 *****************************************************************************/
-
 #ifndef	_ROUTER_H
 #define	_ROUTER_H
 
-#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
-#define	ROUTER_VERSION	1		/* version number */
-#define	ROUTER_RELEASE	1		/* release (minor version) number */
-#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
-#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
-
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
-	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
-	ROUTER_DOWN,				/* shut down device */
-	ROUTER_STAT,				/* get device status */
-	ROUTER_IFNEW,				/* add interface */
-	ROUTER_IFDEL,				/* delete interface */
-	ROUTER_IFSTAT,				/* get interface status */
-	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
-	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
-#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
-#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
-#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
-#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
-#define	NLPID_Q933	0x08	/* CCITT Q.933 */
-
-/* Miscellaneous */
-#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
-#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
-#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
-#define USED_BY_FIELD	8	/* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 	0x01
-#define UDP_FPIPE_TYPE		0x02
-#define UDP_CPIPE_TYPE		0x03
-#define UDP_DRVSTATS_TYPE 	0x04
-#define UDP_INVALID_TYPE  	0x05
-
-/* Command return code */
-#define CMD_OK		0		/* normal firmware return code */
-#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK	0x00
-#define UDP_PKT_FRM_NETWORK	0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER	100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR		0xA1
-#define CRITICAL_INTR_HANDLED	0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
-	unsigned lo_pvc;	/* lowest permanent circuit number */
-	unsigned hi_pvc;	/* highest permanent circuit number */
-	unsigned lo_svc;	/* lowest switched circuit number */
-	unsigned hi_svc;	/* highest switched circuit number */
-	unsigned hdlc_window;	/* HDLC window size (1..7) */
-	unsigned pkt_window;	/* X.25 packet window size (1..7) */
-	unsigned t1;		/* HDLC timer T1, sec (1..30) */
-	unsigned t2;		/* HDLC timer T2, sec (0..29) */
-	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
-	unsigned n2;		/* HDLC retransmission limit (1..30) */
-	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
-	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
-	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
-	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
-	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
-	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
-	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
-	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
-	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
-	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
-	unsigned x25_conf_opt;   /* User defined x25 config optoins */
-	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
-	unsigned char logging;   /* Control connection logging */  
-	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
-	unsigned signalling;	/* local in-channel signalling type */
-	unsigned t391;		/* link integrity verification timer */
-	unsigned t392;		/* polling verification timer */
-	unsigned n391;		/* full status polling cycle counter */
-	unsigned n392;		/* error threshold counter */
-	unsigned n393;		/* monitored events counter */
-	unsigned dlci_num;	/* number of DLCs (access node) */
-	unsigned  dlci[100];    /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
-	unsigned restart_tmr;	/* restart timer */
-	unsigned auth_rsrt_tmr;	/* authentication timer */
-	unsigned auth_wait_tmr;	/* authentication timer */
-	unsigned mdm_fail_tmr;	/* modem failure timer */
-	unsigned dtr_drop_tmr;	/* DTR drop timer */
-	unsigned connect_tmout;	/* connection timeout */
-	unsigned conf_retry;	/* max. retry */
-	unsigned term_retry;	/* max. retry */
-	unsigned fail_retry;	/* max. retry */
-	unsigned auth_retry;	/* max. retry */
-	unsigned auth_options;	/* authentication opt. */
-	unsigned ip_options;	/* IP options */
-	char	authenticator;	/* AUTHENTICATOR or not */
-	char	ip_mode;	/* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
-	unsigned char ignore_dcd;	/* Protocol options:		*/
-	unsigned char ignore_cts;	/*  Ignore these to determine	*/
-	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
-	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
-	unsigned magic;		/* magic number (for verification) */
-	unsigned config_id;	/* configuration structure identifier */
-				/****** hardware configuration ******/
-	unsigned ioport;	/* adapter I/O port base */
-	unsigned long maddr;	/* dual-port memory address */
-	unsigned msize;		/* dual-port memory size */
-	int irq;		/* interrupt request level */
-	int dma;		/* DMA request level */
-        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
-        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
-	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
-	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
-	unsigned bps;		/* data transfer rate */
-	unsigned mtu;		/* maximum transmit unit size */
-        unsigned udp_port;      /* UDP port for management */
-	unsigned char ttl;	/* Time To Live for UDP security */
-	unsigned char ft1;	/* FT1 Configurator Option */
-        char interface;		/* RS-232/V.35, etc. */
-	char clocking;		/* external/internal */
-	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
-	char station;		/* DTE/DCE, primary/secondary, etc. */
-	char connection;	/* permanent/switched/on-demand */
-	char read_mode;		/* read mode: Polling or interrupt */
-	char receive_only;	/* disable tx buffers */
-	char tty;		/* Create a fake tty device */
-	unsigned tty_major;	/* Major number for wanpipe tty device */
-	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
-	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
-	char backup;		/* Backup Mode */
-	unsigned hw_opt[4];	/* other hardware options */
-	unsigned reserved[4];
-				/****** arbitrary data ***************/
-	unsigned data_size;	/* data buffer size */
-	void* data;		/* data buffer, e.g. firmware */
-	union			/****** protocol-specific ************/
-	{
-		wan_x25_conf_t x25;	/* X.25 configuration */
-		wan_ppp_conf_t ppp;	/* PPP configuration */
-		wan_fr_conf_t fr;	/* frame relay configuration */
-		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
-	} u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define	WANCONFIG_X25	101	/* X.25 link */
-#define	WANCONFIG_FR	102	/* frame relay link */
-#define	WANCONFIG_PPP	103	/* synchronous PPP link */
-#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
-#define WANCONFIG_BSC	105	/* BiSync Streaming */
-#define WANCONFIG_HDLC	106	/* HDLC Support */
-#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
-
-/*
- * Configuration options defines.
- */
-/* general options */
-#define	WANOPT_OFF	0
-#define	WANOPT_ON	1
-#define	WANOPT_NO	0
-#define	WANOPT_YES	1
-
-/* intercace options */
-#define	WANOPT_RS232	0
-#define	WANOPT_V35	1
-
-/* data encoding options */
-#define	WANOPT_NRZ	0
-#define	WANOPT_NRZI	1
-#define	WANOPT_FM0	2
-#define	WANOPT_FM1	3
-
-/* link type options */
-#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
-#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
-
-/* clocking options */
-#define	WANOPT_EXTERNAL	0
-#define	WANOPT_INTERNAL	1
-
-/* station options */
-#define	WANOPT_DTE		0
-#define	WANOPT_DCE		1
-#define	WANOPT_CPE		0
-#define	WANOPT_NODE		1
-#define	WANOPT_SECONDARY	0
-#define	WANOPT_PRIMARY		1
-
-/* connection options */
-#define	WANOPT_PERMANENT	0	/* DTR always active */
-#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
-#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
-#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
-#define	WANOPT_FR_LMI		3	/* LMI */
-
-/* PPP IP Mode Options */
-#define	WANOPT_PPP_STATIC	0
-#define	WANOPT_PPP_HOST		1
-#define	WANOPT_PPP_PEER		2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 		1
-#define WANOPT_TWO		2
-#define WANOPT_ONE_AND_HALF	3
-
-#define WANOPT_NONE	0
-#define WANOPT_ODD      1
-#define WANOPT_EVEN	2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define	WANOPT_INTR	0
-#define WANOPT_POLL	1
-
-
-#define WANOPT_TTY_SYNC  0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
-	unsigned state;		/* link state */
-	unsigned ndev;		/* number of configured interfaces */
-
-	/* link/interface configuration */
-	unsigned connection;	/* permanent/switched/on-demand */
-	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
-	unsigned mtu;		/* max. transmit unit for this device */
-
-	/* physical level statistics */
-	unsigned modem_status;	/* modem status */
-	unsigned rx_frames;	/* received frames count */
-	unsigned rx_overruns;	/* receiver overrun error count */
-	unsigned rx_crc_err;	/* receive CRC error count */
-	unsigned rx_aborts;	/* received aborted frames count */
-	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
-	unsigned rx_dropped;	/* frames discarded at device level */
-	unsigned tx_frames;	/* transmitted frames count */
-	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
-	unsigned tx_timeouts;	/* transmission timeouts */
-	unsigned tx_rejects;	/* other transmit errors */
-
-	/* media level statistics */
-	unsigned rx_bad_format;	/* frames with invalid format */
-	unsigned rx_bad_addr;	/* frames with invalid media address */
-	unsigned tx_retries;	/* frames re-transmitted */
-	unsigned reserved[16];	/* reserved for future use */
-} wandev_stat_t;
-
-/* 'state' defines */
-enum wan_states
-{
-	WAN_UNCONFIGURED,	/* link/channel is not configured */
-	WAN_DISCONNECTED,	/* link/channel is disconnected */
-	WAN_CONNECTING,		/* connection is in progress */
-	WAN_CONNECTED,		/* link/channel is operational */
-	WAN_LIMIT,		/* for verification only */
-	WAN_DUALPORT,		/* for Dual Port cards */
-	WAN_DISCONNECTING,
-	WAN_FT1_READY		/* FT1 Configurator Ready */
-};
-
-enum {
-	WAN_LOCAL_IP,
-	WAN_POINTOPOINT_IP,
-	WAN_NETMASK_IP,
-	WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
-#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
-#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
-#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
-	unsigned magic;			/* magic number */
-	unsigned config_id;		/* configuration identifier */
-	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
-	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
-	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
-	unsigned idle_timeout;		/* sec, before disconnecting */
-	unsigned hold_timeout;		/* sec, before re-connecting */
-	unsigned cir;			/* Committed Information Rate fwd,bwd*/
-	unsigned bc;			/* Committed Burst Size fwd, bwd */
-	unsigned be;			/* Excess Burst Size fwd, bwd */ 
-	unsigned char enable_IPX;	/* Enable or Disable IPX */
-	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
-	unsigned inarp_interval;	/* sec, between InARP requests */
-	unsigned long network_number;	/* Network Number for IPX */
-	char mc;			/* Multicast on or off */
-	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
-	unsigned char port;		/* board port */
-	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
-	char pap;			/* PAP enabled or disabled */
-	char chap;			/* CHAP enabled or disabled */
-	unsigned char userid[511];	/* List of User Id */
-	unsigned char passwd[511];	/* List of passwords */
-	unsigned char sysname[31];	/* Name of the system */
-	unsigned char ignore_dcd;	/* Protocol options: */
-	unsigned char ignore_cts;	/*  Ignore these to determine */
-	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
-	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-	unsigned char ttl;		/* Time To Live for UDP security */
-	char interface;			/* RS-232/V.35, etc. */
-	char clocking;			/* external/internal */
-	unsigned bps;			/* data transfer rate */
-	unsigned mtu;			/* maximum transmit unit size */
-	unsigned char if_down;		/* brind down interface when disconnected */
-	unsigned char gateway;		/* Is this interface a gateway */
-	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
-
-	unsigned char asy_data_trans;     /* async API options */
-        unsigned char rts_hs_for_receive; /* async Protocol options */
-        unsigned char xon_xoff_hs_for_receive;
-	unsigned char xon_xoff_hs_for_transmit;
-	unsigned char dcd_hs_for_transmit;
-	unsigned char cts_hs_for_transmit;
-	unsigned char async_mode;
-	unsigned tx_bits_per_char;
-	unsigned rx_bits_per_char;
-	unsigned stop_bits;  
-	unsigned char parity;
- 	unsigned break_timer;
-        unsigned inter_char_timer;
-	unsigned rx_complete_length;
-	unsigned xon_char;
-	unsigned xoff_char;
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-} wanif_conf_t;
+#include <uapi/linux/wanrouter.h>
 
-#ifdef	__KERNEL__
 /****** Kernel Interface ****************************************************/
 
 #include <linux/fs.h>		/* support for device drivers */
@@ -528,5 +126,4 @@ extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long a
 /* list of registered devices */
 extern struct wan_device *wanrouter_router_devlist;
 
-#endif	/* __KERNEL__ */
 #endif	/* _ROUTER_H */
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index da70f0facd2b77215e79860e5af8104da30b03a2..b7f45d48b2de6b4a81dcad34dd13ecc6e68443db 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -5,59 +5,14 @@
  * by Ken Hollis <khollis@bitgate.com>
  *
  */
-
 #ifndef _LINUX_WATCHDOG_H
 #define _LINUX_WATCHDOG_H
 
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-#define	WATCHDOG_IOCTL_BASE	'W'
-
-struct watchdog_info {
-	__u32 options;		/* Options the card/driver supports */
-	__u32 firmware_version;	/* Firmware version of the card */
-	__u8  identity[32];	/* Identity of the board */
-};
-
-#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
-#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
-#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
-#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
-#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
-#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
-#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
-#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
-#define	WDIOC_SETPRETIMEOUT	_IOWR(WATCHDOG_IOCTL_BASE, 8, int)
-#define	WDIOC_GETPRETIMEOUT	_IOR(WATCHDOG_IOCTL_BASE, 9, int)
-#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)
-
-#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
-#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
-
-#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
-#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
-#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
-#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
-#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
-#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
-#define	WDIOF_POWEROVER		0x0040	/* Power over voltage */
-#define	WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
-#define	WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
-#define	WDIOF_PRETIMEOUT	0x0200  /* Pretimeout (in seconds), get/set */
-#define	WDIOF_ALARMONLY		0x0400	/* Watchdog triggers a management or
-					   other external alarm not a reboot */
-#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
-
-#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
-#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
-#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
-
-#ifdef __KERNEL__
 
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/cdev.h>
+#include <uapi/linux/watchdog.h>
 
 struct watchdog_ops;
 struct watchdog_device;
@@ -178,6 +133,4 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
 extern int watchdog_register_device(struct watchdog_device *);
 extern void watchdog_unregister_device(struct watchdog_device *);
 
-#endif	/* __KERNEL__ */
-
 #endif  /* ifndef _LINUX_WATCHDOG_H */
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 4395b28bb86c3bc2db796c284eec108fb4baab4c..4ea4c6e2383d92237537ea93784dbdc104f26094 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -6,690 +6,11 @@
  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
  * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
  */
-
 #ifndef _LINUX_WIRELESS_H
 #define _LINUX_WIRELESS_H
 
-/************************** DOCUMENTATION **************************/
-/*
- * Initial APIs (1996 -> onward) :
- * -----------------------------
- * Basically, the wireless extensions are for now a set of standard ioctl
- * call + /proc/net/wireless
- *
- * The entry /proc/net/wireless give statistics and information on the
- * driver.
- * This is better than having each driver having its entry because
- * its centralised and we may remove the driver module safely.
- *
- * Ioctl are used to configure the driver and issue commands.  This is
- * better than command line options of insmod because we may want to
- * change dynamically (while the driver is running) some parameters.
- *
- * The ioctl mechanimsm are copied from standard devices ioctl.
- * We have the list of command plus a structure descibing the
- * data exchanged...
- * Note that to add these ioctl, I was obliged to modify :
- *	# net/core/dev.c (two place + add include)
- *	# net/ipv4/af_inet.c (one place + add include)
- *
- * /proc/net/wireless is a copy of /proc/net/dev.
- * We have a structure for data passed from the driver to /proc/net/wireless
- * Too add this, I've modified :
- *	# net/core/dev.c (two other places)
- *	# include/linux/netdevice.h (one place)
- *	# include/linux/proc_fs.h (one place)
- *
- * New driver API (2002 -> onward) :
- * -------------------------------
- * This file is only concerned with the user space API and common definitions.
- * The new driver API is defined and documented in :
- *	# include/net/iw_handler.h
- *
- * Note as well that /proc/net/wireless implementation has now moved in :
- *	# net/core/wireless.c
- *
- * Wireless Events (2002 -> onward) :
- * --------------------------------
- * Events are defined at the end of this file, and implemented in :
- *	# net/core/wireless.c
- *
- * Other comments :
- * --------------
- * Do not add here things that are redundant with other mechanisms
- * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
- * wireless specific.
- *
- * These wireless extensions are not magic : each driver has to provide
- * support for them...
- *
- * IMPORTANT NOTE : As everything in the kernel, this is very much a
- * work in progress. Contact me if you have ideas of improvements...
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/types.h>		/* for __u* and __s* typedefs */
-#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
-#include <linux/if.h>			/* for IFNAMSIZ and co... */
-
-/***************************** VERSION *****************************/
-/*
- * This constant is used to know the availability of the wireless
- * extensions and to know which version of wireless extensions it is
- * (there is some stuff that will be added in the future...)
- * I just plan to increment with each new version.
- */
-#define WIRELESS_EXT	22
-
-/*
- * Changes :
- *
- * V2 to V3
- * --------
- *	Alan Cox start some incompatibles changes. I've integrated a bit more.
- *	- Encryption renamed to Encode to avoid US regulation problems
- *	- Frequency changed from float to struct to avoid problems on old 386
- *
- * V3 to V4
- * --------
- *	- Add sensitivity
- *
- * V4 to V5
- * --------
- *	- Missing encoding definitions in range
- *	- Access points stuff
- *
- * V5 to V6
- * --------
- *	- 802.11 support (ESSID ioctls)
- *
- * V6 to V7
- * --------
- *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
- *
- * V7 to V8
- * --------
- *	- Changed my e-mail address
- *	- More 802.11 support (nickname, rate, rts, frag)
- *	- List index in frequencies
- *
- * V8 to V9
- * --------
- *	- Support for 'mode of operation' (ad-hoc, managed...)
- *	- Support for unicast and multicast power saving
- *	- Change encoding to support larger tokens (>64 bits)
- *	- Updated iw_params (disable, flags) and use it for NWID
- *	- Extracted iw_point from iwreq for clarity
- *
- * V9 to V10
- * ---------
- *	- Add PM capability to range structure
- *	- Add PM modifier : MAX/MIN/RELATIVE
- *	- Add encoding option : IW_ENCODE_NOKEY
- *	- Add TxPower ioctls (work like TxRate)
- *
- * V10 to V11
- * ----------
- *	- Add WE version in range (help backward/forward compatibility)
- *	- Add retry ioctls (work like PM)
- *
- * V11 to V12
- * ----------
- *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
- *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
- *	- Add new statistics (frag, retry, beacon)
- *	- Add average quality (for user space calibration)
- *
- * V12 to V13
- * ----------
- *	- Document creation of new driver API.
- *	- Extract union iwreq_data from struct iwreq (for new driver API).
- *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
- *
- * V13 to V14
- * ----------
- *	- Wireless Events support : define struct iw_event
- *	- Define additional specific event numbers
- *	- Add "addr" and "param" fields in union iwreq_data
- *	- AP scanning stuff (SIOCSIWSCAN and friends)
- *
- * V14 to V15
- * ----------
- *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
- *	- Make struct iw_freq signed (both m & e), add explicit padding
- *	- Add IWEVCUSTOM for driver specific event/scanning token
- *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
- *	- Add IW_TXPOW_RANGE for range of Tx Powers
- *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
- *	- Add IW_MODE_MONITOR for passive monitor
- *
- * V15 to V16
- * ----------
- *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
- *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
- *	- Reshuffle struct iw_range for increases, add filler
- *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
- *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
- *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
- *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
- *
- * V16 to V17
- * ----------
- *	- Add flags to frequency -> auto/fixed
- *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
- *	- Wireless Event capability in struct iw_range
- *	- Add support for relative TxPower (yick !)
- *
- * V17 to V18 (From Jouni Malinen <j@w1.fi>)
- * ----------
- *	- Add support for WPA/WPA2
- *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
- *	  SIOCGIWENCODEEXT)
- *	- Add SIOCSIWGENIE/SIOCGIWGENIE
- *	- Add SIOCSIWMLME
- *	- Add SIOCSIWPMKSA
- *	- Add struct iw_range bit field for supported encoding capabilities
- *	- Add optional scan request parameters for SIOCSIWSCAN
- *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
- *	  related parameters (extensible up to 4096 parameter values)
- *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
- *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
- *
- * V18 to V19
- * ----------
- *	- Remove (struct iw_point *)->pointer from events and streams
- *	- Remove header includes to help user space
- *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
- *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
- *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
- *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
- *
- * V19 to V20
- * ----------
- *	- RtNetlink requests support (SET/GET)
- *
- * V20 to V21
- * ----------
- *	- Remove (struct net_device *)->get_wireless_stats()
- *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
- *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
- *	- Power/Retry relative values no longer * 100000
- *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
- *
- * V21 to V22
- * ----------
- *	- Prevent leaking of kernel space in stream on 64 bits.
- */
-
-/**************************** CONSTANTS ****************************/
-
-/* -------------------------- IOCTL LIST -------------------------- */
-
-/* Wireless Identification */
-#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
-#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
-/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
- * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
- * Don't put the name of your driver there, it's useless. */
-
-/* Basic operations */
-#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
-#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
-#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
-#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
-#define SIOCSIWMODE	0x8B06		/* set operation mode */
-#define SIOCGIWMODE	0x8B07		/* get operation mode */
-#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
-#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
-
-/* Informative stuff */
-#define SIOCSIWRANGE	0x8B0A		/* Unused */
-#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
-#define SIOCSIWPRIV	0x8B0C		/* Unused */
-#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
-#define SIOCSIWSTATS	0x8B0E		/* Unused */
-#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
-/* SIOCGIWSTATS is strictly used between user space and the kernel, and
- * is never passed to the driver (i.e. the driver will never see it). */
-
-/* Spy support (statistics per MAC address - used for Mobile IP support) */
-#define SIOCSIWSPY	0x8B10		/* set spy addresses */
-#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
-#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
-#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
-
-/* Access Point manipulation */
-#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
-#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
-#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
-#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
-#define SIOCGIWSCAN	0x8B19		/* get scanning results */
-
-/* 802.11 specific support */
-#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
-#define SIOCGIWESSID	0x8B1B		/* get ESSID */
-#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
-#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
-/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
- * within the 'iwreq' structure, so we need to use the 'data' member to
- * point to a string in user space, like it is done for RANGE... */
-
-/* Other parameters useful in 802.11 and some other devices */
-#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
-#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
-#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
-#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
-#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
-#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
-#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
-#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
-#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
-#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
-
-/* Encoding stuff (scrambling, hardware security, WEP...) */
-#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
-#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
-/* Power saving stuff (power management, unicast and multicast) */
-#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
-#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
-
-/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
- * This ioctl uses struct iw_point and data buffer that includes IE id and len
- * fields. More than one IE may be included in the request. Setting the generic
- * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
- * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
- * are required to report the used IE as a wireless event, e.g., when
- * associating with an AP. */
-#define SIOCSIWGENIE	0x8B30		/* set generic IE */
-#define SIOCGIWGENIE	0x8B31		/* get generic IE */
-
-/* WPA : IEEE 802.11 MLME requests */
-#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
-					 * struct iw_mlme */
-/* WPA : Authentication mode parameters */
-#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
-#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
-
-/* WPA : Extended version of encoding configuration */
-#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
-#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
-
-/* WPA2 : PMKSA cache management */
-#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
-
-/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
-
-/* These 32 ioctl are wireless device private, for 16 commands.
- * Each driver is free to use them for whatever purpose it chooses,
- * however the driver *must* export the description of those ioctls
- * with SIOCGIWPRIV and *must* use arguments as defined below.
- * If you don't follow those rules, DaveM is going to hate you (reason :
- * it make mixed 32/64bit operation impossible).
- */
-#define SIOCIWFIRSTPRIV	0x8BE0
-#define SIOCIWLASTPRIV	0x8BFF
-/* Previously, we were using SIOCDEVPRIVATE, but we now have our
- * separate range because of collisions with other tools such as
- * 'mii-tool'.
- * We now have 32 commands, so a bit more space ;-).
- * Also, all 'even' commands are only usable by root and don't return the
- * content of ifr/iwr to user (but you are not obliged to use the set/get
- * convention, just use every other two command). More details in iwpriv.c.
- * And I repeat : you are not forced to use them with iwpriv, but you
- * must be compliant with it.
- */
-
-/* ------------------------- IOCTL STUFF ------------------------- */
-
-/* The first and the last (range) */
-#define SIOCIWFIRST	0x8B00
-#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
-#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
-#define IW_HANDLER(id, func)			\
-	[IW_IOCTL_IDX(id)] = func
-
-/* Odd : get (world access), even : set (root access) */
-#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
-#define IW_IS_GET(cmd)	((cmd) & 0x1)
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/* Those are *NOT* ioctls, do not issue request on them !!! */
-/* Most events use the same identifier as ioctl requests */
-
-#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
-#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
-#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
-#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
-#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
-#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
-					 * (scan results); This includes id and
-					 * length fields. One IWEVGENIE may
-					 * contain more than one IE. Scan
-					 * results may contain one or more
-					 * IWEVGENIE events. */
-#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
-					 * (struct iw_michaelmicfailure)
-					 */
-#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
-					 * The data includes id and length
-					 * fields and may contain more than one
-					 * IE. This event is required in
-					 * Managed mode if the driver
-					 * generates its own WPA/RSN IE. This
-					 * should be sent just before
-					 * IWEVREGISTERED event for the
-					 * association. */
-#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
-					 * Response. The data includes id and
-					 * length fields and may contain more
-					 * than one IE. This may be sent
-					 * between IWEVASSOCREQIE and
-					 * IWEVREGISTERED events for the
-					 * association. */
-#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
-					 * pre-authentication
-					 * (struct iw_pmkid_cand) */
-
-#define IWEVFIRST	0x8C00
-#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
-
-/* ------------------------- PRIVATE INFO ------------------------- */
-/*
- * The following is used with SIOCGIWPRIV. It allow a driver to define
- * the interface (name, type of data) for its private ioctl.
- * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
- */
-
-#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
-#define IW_PRIV_TYPE_NONE	0x0000
-#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
-#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
-#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
-#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
-#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
-
-#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
-
-#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
-
-/*
- * Note : if the number of args is fixed and the size < 16 octets,
- * instead of passing a pointer we will put args in the iwreq struct...
- */
-
-/* ----------------------- OTHER CONSTANTS ----------------------- */
-
-/* Maximum frequencies in the range struct */
-#define IW_MAX_FREQUENCIES	32
-/* Note : if you have something like 80 frequencies,
- * don't increase this constant and don't fill the frequency list.
- * The user will be able to set by channel anyway... */
-
-/* Maximum bit rates in the range struct */
-#define IW_MAX_BITRATES		32
-
-/* Maximum tx powers in the range struct */
-#define IW_MAX_TXPOWER		8
-/* Note : if you more than 8 TXPowers, just set the max and min or
- * a few of them in the struct iw_range. */
-
-/* Maximum of address that you may set with SPY */
-#define IW_MAX_SPY		8
-
-/* Maximum of address that you may get in the
-   list of access points in range */
-#define IW_MAX_AP		64
-
-/* Maximum size of the ESSID and NICKN strings */
-#define IW_ESSID_MAX_SIZE	32
-
-/* Modes of operation */
-#define IW_MODE_AUTO	0	/* Let the driver decides */
-#define IW_MODE_ADHOC	1	/* Single cell network */
-#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
-#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
-#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
-#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
-#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
-#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
-
-/* Statistics flags (bitmask in updated) */
-#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
-#define IW_QUAL_LEVEL_UPDATED	0x02
-#define IW_QUAL_NOISE_UPDATED	0x04
-#define IW_QUAL_ALL_UPDATED	0x07
-#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
-#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
-#define IW_QUAL_LEVEL_INVALID	0x20
-#define IW_QUAL_NOISE_INVALID	0x40
-#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
-#define IW_QUAL_ALL_INVALID	0x70
-
-/* Frequency flags */
-#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
-#define IW_FREQ_FIXED		0x01	/* Force a specific value */
-
-/* Maximum number of size of encoding token available
- * they are listed in the range structure */
-#define IW_MAX_ENCODING_SIZES	8
-
-/* Maximum size of the encoding token in bytes */
-#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
-
-/* Flags for encoding (along with the token) */
-#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
-#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
-#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
-#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
-#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
-#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
-#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
-#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
-#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
-
-/* Power management flags available (along with the value, if any) */
-#define IW_POWER_ON		0x0000	/* No details... */
-#define IW_POWER_TYPE		0xF000	/* Type of parameter */
-#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
-#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
-#define IW_POWER_MODE		0x0F00	/* Power Management mode */
-#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
-#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
-#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
-#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
-#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
-#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
-#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
-#define IW_POWER_MAX		0x0002	/* Value is a maximum */
-#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
-
-/* Transmit Power flags available */
-#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
-#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
-#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
-#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
-#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
-
-/* Retry limits and lifetime flags available */
-#define IW_RETRY_ON		0x0000	/* No details... */
-#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
-#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
-#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
-#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
-#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
-#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
-#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
-#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
-#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
-
-/* Scanning request flags */
-#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
-#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
-#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
-#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
-#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
-#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
-#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
-#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
-#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
-/* struct iw_scan_req scan_type */
-#define IW_SCAN_TYPE_ACTIVE 0
-#define IW_SCAN_TYPE_PASSIVE 1
-/* Maximum size of returned data */
-#define IW_SCAN_MAX_DATA	4096	/* In bytes */
-
-/* Scan capability flags - in (struct iw_range *)->scan_capa */
-#define IW_SCAN_CAPA_NONE		0x00
-#define IW_SCAN_CAPA_ESSID		0x01
-#define IW_SCAN_CAPA_BSSID		0x02
-#define IW_SCAN_CAPA_CHANNEL	0x04
-#define IW_SCAN_CAPA_MODE		0x08
-#define IW_SCAN_CAPA_RATE		0x10
-#define IW_SCAN_CAPA_TYPE		0x20
-#define IW_SCAN_CAPA_TIME		0x40
-
-/* Max number of char in custom event - use multiple of them if needed */
-#define IW_CUSTOM_MAX		256	/* In bytes */
-
-/* Generic information element */
-#define IW_GENERIC_IE_MAX	1024
-
-/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-#define IW_MLME_DEAUTH		0
-#define IW_MLME_DISASSOC	1
-#define IW_MLME_AUTH		2
-#define IW_MLME_ASSOC		3
-
-/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-#define IW_AUTH_INDEX		0x0FFF
-#define IW_AUTH_FLAGS		0xF000
-/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
- * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
- * parameter that is being set/get to; value will be read/written to
- * struct iw_param value field) */
-#define IW_AUTH_WPA_VERSION		0
-#define IW_AUTH_CIPHER_PAIRWISE		1
-#define IW_AUTH_CIPHER_GROUP		2
-#define IW_AUTH_KEY_MGMT		3
-#define IW_AUTH_TKIP_COUNTERMEASURES	4
-#define IW_AUTH_DROP_UNENCRYPTED	5
-#define IW_AUTH_80211_AUTH_ALG		6
-#define IW_AUTH_WPA_ENABLED		7
-#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
-#define IW_AUTH_ROAMING_CONTROL		9
-#define IW_AUTH_PRIVACY_INVOKED		10
-#define IW_AUTH_CIPHER_GROUP_MGMT	11
-#define IW_AUTH_MFP			12
-
-/* IW_AUTH_WPA_VERSION values (bit field) */
-#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
-#define IW_AUTH_WPA_VERSION_WPA		0x00000002
-#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
-
-/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
- * values (bit field) */
-#define IW_AUTH_CIPHER_NONE	0x00000001
-#define IW_AUTH_CIPHER_WEP40	0x00000002
-#define IW_AUTH_CIPHER_TKIP	0x00000004
-#define IW_AUTH_CIPHER_CCMP	0x00000008
-#define IW_AUTH_CIPHER_WEP104	0x00000010
-#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
-
-/* IW_AUTH_KEY_MGMT values (bit field) */
-#define IW_AUTH_KEY_MGMT_802_1X	1
-#define IW_AUTH_KEY_MGMT_PSK	2
-
-/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
-#define IW_AUTH_ALG_SHARED_KEY	0x00000002
-#define IW_AUTH_ALG_LEAP	0x00000004
-
-/* IW_AUTH_ROAMING_CONTROL values */
-#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
-#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
-					 * control */
-
-/* IW_AUTH_MFP (management frame protection) values */
-#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
-#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
-#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
-
-/* SIOCSIWENCODEEXT definitions */
-#define IW_ENCODE_SEQ_MAX_SIZE	8
-/* struct iw_encode_ext ->alg */
-#define IW_ENCODE_ALG_NONE	0
-#define IW_ENCODE_ALG_WEP	1
-#define IW_ENCODE_ALG_TKIP	2
-#define IW_ENCODE_ALG_CCMP	3
-#define IW_ENCODE_ALG_PMK	4
-#define IW_ENCODE_ALG_AES_CMAC	5
-/* struct iw_encode_ext ->ext_flags */
-#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
-#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
-#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
-#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
-
-/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
-#define IW_MICFAILURE_GROUP	0x00000004
-#define IW_MICFAILURE_PAIRWISE	0x00000008
-#define IW_MICFAILURE_STAKEY	0x00000010
-#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
-					    */
-
-/* Bit field values for enc_capa in struct iw_range */
-#define IW_ENC_CAPA_WPA		0x00000001
-#define IW_ENC_CAPA_WPA2	0x00000002
-#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
-#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
-#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
-
-/* Event capability macros - in (struct iw_range *)->event_capa
- * Because we have more than 32 possible events, we use an array of
- * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
-					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
-					 (cmd - SIOCIWFIRST))
-#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
-#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
-/* Event capability constants - event autogenerated by the kernel
- * This list is valid for most 802.11 devices, customise as needed... */
-#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
-				 IW_EVENT_CAPA_MASK(0x8B06) | \
-				 IW_EVENT_CAPA_MASK(0x8B1A))
-#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
-/* "Easy" macro to set events in iw_range (less efficient) */
-#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
-#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
-
-
-/****************************** TYPES ******************************/
-
-/* --------------------------- SUBTYPES --------------------------- */
-/*
- *	Generic format for most parameters that fit in an int
- */
-struct	iw_param
-{
-  __s32		value;		/* The value of the parameter itself */
-  __u8		fixed;		/* Hardware should not use auto select */
-  __u8		disabled;	/* Disable the feature */
-  __u16		flags;		/* Various specifc flags (if any) */
-};
-
-/*
- *	For all data larger than 16 octets, we need to use a
- *	pointer to memory allocated in user space.
- */
-struct	iw_point
-{
-  void __user	*pointer;	/* Pointer to the data  (in user space) */
-  __u16		length;		/* number of fields or size in bytes */
-  __u16		flags;		/* Optional params */
-};
+#include <uapi/linux/wireless.h>
 
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 #include <linux/compat.h>
@@ -700,432 +21,6 @@ struct compat_iw_point {
 	__u16 flags;
 };
 #endif
-#endif
-
-/*
- *	A frequency
- *	For numbers lower than 10^9, we encode the number in 'm' and
- *	set 'e' to 0
- *	For number greater than 10^9, we divide it by the lowest power
- *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
- *	The power of 10 is in 'e', the result of the division is in 'm'.
- */
-struct	iw_freq
-{
-	__s32		m;		/* Mantissa */
-	__s16		e;		/* Exponent */
-	__u8		i;		/* List index (when in range struct) */
-	__u8		flags;		/* Flags (fixed/auto) */
-};
-
-/*
- *	Quality of the link
- */
-struct	iw_quality
-{
-	__u8		qual;		/* link quality (%retries, SNR,
-					   %missed beacons or better...) */
-	__u8		level;		/* signal level (dBm) */
-	__u8		noise;		/* noise level (dBm) */
-	__u8		updated;	/* Flags to know if updated */
-};
-
-/*
- *	Packet discarded in the wireless adapter due to
- *	"wireless" specific problems...
- *	Note : the list of counter and statistics in net_device_stats
- *	is already pretty exhaustive, and you should use that first.
- *	This is only additional stats...
- */
-struct	iw_discarded
-{
-	__u32		nwid;		/* Rx : Wrong nwid/essid */
-	__u32		code;		/* Rx : Unable to code/decode (WEP) */
-	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
-	__u32		retries;	/* Tx : Max MAC retries num reached */
-	__u32		misc;		/* Others cases */
-};
-
-/*
- *	Packet/Time period missed in the wireless adapter due to
- *	"wireless" specific problems...
- */
-struct	iw_missed
-{
-	__u32		beacon;		/* Missed beacons/superframe */
-};
-
-/*
- *	Quality range (for spy threshold)
- */
-struct	iw_thrspy
-{
-	struct sockaddr		addr;		/* Source address (hw/mac) */
-	struct iw_quality	qual;		/* Quality of the link */
-	struct iw_quality	low;		/* Low threshold */
-	struct iw_quality	high;		/* High threshold */
-};
-
-/*
- *	Optional data for scan request
- *
- *	Note: these optional parameters are controlling parameters for the
- *	scanning behavior, these do not apply to getting scan results
- *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
- *	provide a merged results with all BSSes even if the previous scan
- *	request limited scanning to a subset, e.g., by specifying an SSID.
- *	Especially, scan results are required to include an entry for the
- *	current BSS if the driver is in Managed mode and associated with an AP.
- */
-struct	iw_scan_req
-{
-	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
-	__u8		essid_len;
-	__u8		num_channels; /* num entries in channel_list;
-				       * 0 = scan all allowed channels */
-	__u8		flags; /* reserved as padding; use zero, this may
-				* be used in the future for adding flags
-				* to request different scan behavior */
-	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
-				* individual address of a specific BSS */
-
-	/*
-	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
-	 * the current ESSID. This allows scan requests for specific ESSID
-	 * without having to change the current ESSID and potentially breaking
-	 * the current association.
-	 */
-	__u8		essid[IW_ESSID_MAX_SIZE];
-
-	/*
-	 * Optional parameters for changing the default scanning behavior.
-	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
-	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
-	 * reasonable default values. min_channel_time defines the time that
-	 * will be used to wait for the first reply on each channel. If no
-	 * replies are received, next channel will be scanned after this. If
-	 * replies are received, total time waited on the channel is defined by
-	 * max_channel_time.
-	 */
-	__u32		min_channel_time; /* in TU */
-	__u32		max_channel_time; /* in TU */
-
-	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
-};
-
-/* ------------------------- WPA SUPPORT ------------------------- */
-
-/*
- *	Extended data structure for get/set encoding (this is used with
- *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
- *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
- *	only the data contents changes (key data -> this structure, including
- *	key data).
- *
- *	If the new key is the first group key, it will be set as the default
- *	TX key. Otherwise, default TX key index is only changed if
- *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
- *
- *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
- *	special "change TX key index" operation which is indicated by setting
- *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
- *
- *	tx_seq/rx_seq are only used when respective
- *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
- *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
- *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
- *	used only by an Authenticator (AP or an IBSS station) to get the
- *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
- *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
- *	debugging/testing.
- */
-struct	iw_encode_ext
-{
-	__u32		ext_flags; /* IW_ENCODE_EXT_* */
-	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
-			       * (group) keys or unicast address for
-			       * individual keys */
-	__u16		alg; /* IW_ENCODE_ALG_* */
-	__u16		key_len;
-	__u8		key[0];
-};
-
-/* SIOCSIWMLME data */
-struct	iw_mlme
-{
-	__u16		cmd; /* IW_MLME_* */
-	__u16		reason_code;
-	struct sockaddr	addr;
-};
-
-/* SIOCSIWPMKSA data */
-#define IW_PMKSA_ADD		1
-#define IW_PMKSA_REMOVE		2
-#define IW_PMKSA_FLUSH		3
-
-#define IW_PMKID_LEN	16
-
-struct	iw_pmksa
-{
-	__u32		cmd; /* IW_PMKSA_* */
-	struct sockaddr	bssid;
-	__u8		pmkid[IW_PMKID_LEN];
-};
-
-/* IWEVMICHAELMICFAILURE data */
-struct	iw_michaelmicfailure
-{
-	__u32		flags;
-	struct sockaddr	src_addr;
-	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-};
-
-/* IWEVPMKIDCAND data */
-#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
-struct	iw_pmkid_cand
-{
-	__u32		flags; /* IW_PMKID_CAND_* */
-	__u32		index; /* the smaller the index, the higher the
-				* priority */
-	struct sockaddr	bssid;
-};
-
-/* ------------------------ WIRELESS STATS ------------------------ */
-/*
- * Wireless statistics (used for /proc/net/wireless)
- */
-struct	iw_statistics
-{
-	__u16		status;		/* Status
-					 * - device dependent for now */
-
-	struct iw_quality	qual;		/* Quality of the link
-						 * (instant/mean/max) */
-	struct iw_discarded	discard;	/* Packet discarded counts */
-	struct iw_missed	miss;		/* Packet missed counts */
-};
-
-/* ------------------------ IOCTL REQUEST ------------------------ */
-/*
- * This structure defines the payload of an ioctl, and is used 
- * below.
- *
- * Note that this structure should fit on the memory footprint
- * of iwreq (which is the same as ifreq), which mean a max size of
- * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
- * You should check this when increasing the structures defined
- * above in this file...
- */
-union	iwreq_data
-{
-	/* Config - generic */
-	char		name[IFNAMSIZ];
-	/* Name : used to verify the presence of  wireless extensions.
-	 * Name of the protocol/provider... */
-
-	struct iw_point	essid;		/* Extended network name */
-	struct iw_param	nwid;		/* network id (or domain - the cell) */
-	struct iw_freq	freq;		/* frequency or channel :
-					 * 0-1000 = channel
-					 * > 1000 = frequency in Hz */
-
-	struct iw_param	sens;		/* signal level threshold */
-	struct iw_param	bitrate;	/* default bit rate */
-	struct iw_param	txpower;	/* default transmit power */
-	struct iw_param	rts;		/* RTS threshold threshold */
-	struct iw_param	frag;		/* Fragmentation threshold */
-	__u32		mode;		/* Operation mode */
-	struct iw_param	retry;		/* Retry limits & lifetime */
-
-	struct iw_point	encoding;	/* Encoding stuff : tokens */
-	struct iw_param	power;		/* PM duration/timeout */
-	struct iw_quality qual;		/* Quality part of statistics */
-
-	struct sockaddr	ap_addr;	/* Access point address */
-	struct sockaddr	addr;		/* Destination address (hw/mac) */
-
-	struct iw_param	param;		/* Other small parameters */
-	struct iw_point	data;		/* Other large parameters */
-};
-
-/*
- * The structure to exchange data for ioctl.
- * This structure is the same as 'struct ifreq', but (re)defined for
- * convenience...
- * Do I need to remind you about structure size (32 octets) ?
- */
-struct	iwreq 
-{
-	union
-	{
-		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
-	} ifr_ifrn;
-
-	/* Data part (defined just above) */
-	union	iwreq_data	u;
-};
-
-/* -------------------------- IOCTL DATA -------------------------- */
-/*
- *	For those ioctl which want to exchange mode data that what could
- *	fit in the above structure...
- */
-
-/*
- *	Range of parameters
- */
-
-struct	iw_range
-{
-	/* Informative stuff (to choose between different interface) */
-	__u32		throughput;	/* To give an idea... */
-	/* In theory this value should be the maximum benchmarked
-	 * TCP/IP throughput, because with most of these devices the
-	 * bit rate is meaningless (overhead an co) to estimate how
-	 * fast the connection will go and pick the fastest one.
-	 * I suggest people to play with Netperf or any benchmark...
-	 */
-
-	/* NWID (or domain id) */
-	__u32		min_nwid;	/* Minimal NWID we are able to set */
-	__u32		max_nwid;	/* Maximal NWID we are able to set */
-
-	/* Old Frequency (backward compat - moved lower ) */
-	__u16		old_num_channels;
-	__u8		old_num_frequency;
-
-	/* Scan capabilities */
-	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
-
-	/* Wireless event capability bitmasks */
-	__u32		event_capa[6];
-
-	/* signal level threshold range */
-	__s32		sensitivity;
-
-	/* Quality of link & SNR stuff */
-	/* Quality range (link, level, noise)
-	 * If the quality is absolute, it will be in the range [0 ; max_qual],
-	 * if the quality is dBm, it will be in the range [max_qual ; 0].
-	 * Don't forget that we use 8 bit arithmetics... */
-	struct iw_quality	max_qual;	/* Quality of the link */
-	/* This should contain the average/typical values of the quality
-	 * indicator. This should be the threshold between a "good" and
-	 * a "bad" link (example : monitor going from green to orange).
-	 * Currently, user space apps like quality monitors don't have any
-	 * way to calibrate the measurement. With this, they can split
-	 * the range between 0 and max_qual in different quality level
-	 * (using a geometric subdivision centered on the average).
-	 * I expect that people doing the user space apps will feedback
-	 * us on which value we need to put in each driver... */
-	struct iw_quality	avg_qual;	/* Quality of the link */
-
-	/* Rates */
-	__u8		num_bitrates;	/* Number of entries in the list */
-	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
-
-	/* RTS threshold */
-	__s32		min_rts;	/* Minimal RTS threshold */
-	__s32		max_rts;	/* Maximal RTS threshold */
-
-	/* Frag threshold */
-	__s32		min_frag;	/* Minimal frag threshold */
-	__s32		max_frag;	/* Maximal frag threshold */
-
-	/* Power Management duration & timeout */
-	__s32		min_pmp;	/* Minimal PM period */
-	__s32		max_pmp;	/* Maximal PM period */
-	__s32		min_pmt;	/* Minimal PM timeout */
-	__s32		max_pmt;	/* Maximal PM timeout */
-	__u16		pmp_flags;	/* How to decode max/min PM period */
-	__u16		pmt_flags;	/* How to decode max/min PM timeout */
-	__u16		pm_capa;	/* What PM options are supported */
-
-	/* Encoder stuff */
-	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
-	__u8	num_encoding_sizes;	/* Number of entry in the list */
-	__u8	max_encoding_tokens;	/* Max number of tokens */
-	/* For drivers that need a "login/passwd" form */
-	__u8	encoding_login_index;	/* token index for login token */
-
-	/* Transmit power */
-	__u16		txpower_capa;	/* What options are supported */
-	__u8		num_txpower;	/* Number of entries in the list */
-	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
-
-	/* Wireless Extension version info */
-	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
-	__u8		we_version_source;	/* Last update of source */
-
-	/* Retry limits and lifetime */
-	__u16		retry_capa;	/* What retry options are supported */
-	__u16		retry_flags;	/* How to decode max/min retry limit */
-	__u16		r_time_flags;	/* How to decode max/min retry life */
-	__s32		min_retry;	/* Minimal number of retries */
-	__s32		max_retry;	/* Maximal number of retries */
-	__s32		min_r_time;	/* Minimal retry lifetime */
-	__s32		max_r_time;	/* Maximal retry lifetime */
-
-	/* Frequency */
-	__u16		num_channels;	/* Number of channels [0; num - 1] */
-	__u8		num_frequency;	/* Number of entry in the list */
-	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
-	/* Note : this frequency list doesn't need to fit channel numbers,
-	 * because each entry contain its channel index */
-
-	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
-};
-
-/*
- * Private ioctl interface information
- */
- 
-struct	iw_priv_args
-{
-	__u32		cmd;		/* Number of the ioctl to issue */
-	__u16		set_args;	/* Type and number of args */
-	__u16		get_args;	/* Type and number of args */
-	char		name[IFNAMSIZ];	/* Name of the extension */
-};
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/*
- * Wireless events are carried through the rtnetlink socket to user
- * space. They are encapsulated in the IFLA_WIRELESS field of
- * a RTM_NEWLINK message.
- */
-
-/*
- * A Wireless Event. Contains basically the same data as the ioctl...
- */
-struct iw_event
-{
-	__u16		len;			/* Real length of this stuff */
-	__u16		cmd;			/* Wireless IOCTL */
-	union iwreq_data	u;		/* IOCTL fixed payload */
-};
-
-/* Size of the Event prefix (including padding and alignement junk) */
-#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
-/* Size of the various events */
-#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
-#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
-#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
-
-/* iw_point events are special. First, the payload (extra data) come at
- * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
- * we omit the pointer, so start at an offset. */
-#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
-			  (char *) NULL)
-#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
-			 IW_EV_POINT_OFF)
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 struct __compat_iw_event {
 	__u16		len;			/* Real length of this stuff */
@@ -1146,17 +41,4 @@ struct __compat_iw_event {
 	(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
 	 IW_EV_COMPAT_POINT_OFF)
 #endif
-#endif
-
-/* Size of the Event prefix when packed in stream */
-#define IW_EV_LCP_PK_LEN	(4)
-/* Size of the various events when packed in stream */
-#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
-#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
-#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
-#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
-
 #endif	/* _LINUX_WIRELESS_H */
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index cc13e1115970455e4240ff09e69d34f610cf337d..fdbafc6841cfd609cfd0c810ddcf4c3df7a33ed2 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -10,61 +10,11 @@
 #ifndef _LINUX_XATTR_H
 #define _LINUX_XATTR_H
 
-#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
-#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
-
-/* Namespaces */
-#define XATTR_OS2_PREFIX "os2."
-#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
-
-#define XATTR_SECURITY_PREFIX	"security."
-#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
-
-#define XATTR_SYSTEM_PREFIX "system."
-#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
-
-#define XATTR_TRUSTED_PREFIX "trusted."
-#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
-
-#define XATTR_USER_PREFIX "user."
-#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
-
-/* Security namespace */
-#define XATTR_EVM_SUFFIX "evm"
-#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
-
-#define XATTR_IMA_SUFFIX "ima"
-#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
-
-#define XATTR_SELINUX_SUFFIX "selinux"
-#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
-
-#define XATTR_SMACK_SUFFIX "SMACK64"
-#define XATTR_SMACK_IPIN "SMACK64IPIN"
-#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
-#define XATTR_SMACK_EXEC "SMACK64EXEC"
-#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
-#define XATTR_SMACK_MMAP "SMACK64MMAP"
-#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
-#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
-#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
-#define XATTR_NAME_SMACKEXEC	XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
-#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
-#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
-
-#define XATTR_CAPS_SUFFIX "capability"
-#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
-
-#define XATTR_POSIX_ACL_ACCESS  "posix_acl_access"
-#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
-#define XATTR_POSIX_ACL_DEFAULT  "posix_acl_default"
-#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
-
-#ifdef  __KERNEL__
 
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/xattr.h>
 
 struct inode;
 struct dentry;
@@ -147,6 +97,4 @@ ssize_t simple_xattr_list(struct simple_xattrs *xattrs, char *buffer,
 void simple_xattr_list_add(struct simple_xattrs *xattrs,
 			   struct simple_xattr *new_xattr);
 
-#endif  /*  __KERNEL__  */
-
 #endif	/* _LINUX_XATTR_H */
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index b0fd4d03499d02c3d0b0a47f76b897a12672012c..e194387ef7845a77c53114f0e3dbada06e4c8189 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -22,3 +22,396 @@ header-y += usb/
 header-y += wimax/
 
 genhdr-y += version.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
+header-y += a.out.h
+endif
+
+header-y += acct.h
+header-y += adb.h
+header-y += adfs_fs.h
+header-y += affs_hardblocks.h
+header-y += agpgart.h
+header-y += aio_abi.h
+header-y += apm_bios.h
+header-y += arcfb.h
+header-y += atalk.h
+header-y += atm.h
+header-y += atm_eni.h
+header-y += atm_he.h
+header-y += atm_idt77105.h
+header-y += atm_nicstar.h
+header-y += atm_tcp.h
+header-y += atm_zatm.h
+header-y += atmapi.h
+header-y += atmarp.h
+header-y += atmbr2684.h
+header-y += atmclip.h
+header-y += atmdev.h
+header-y += atmioc.h
+header-y += atmlec.h
+header-y += atmmpc.h
+header-y += atmppp.h
+header-y += atmsap.h
+header-y += atmsvc.h
+header-y += audit.h
+header-y += auto_fs.h
+header-y += auto_fs4.h
+header-y += auxvec.h
+header-y += ax25.h
+header-y += b1lli.h
+header-y += baycom.h
+header-y += bfs_fs.h
+header-y += binfmts.h
+header-y += blkpg.h
+header-y += blktrace_api.h
+header-y += bpqether.h
+header-y += bsg.h
+header-y += can.h
+header-y += capability.h
+header-y += capi.h
+header-y += cciss_defs.h
+header-y += cciss_ioctl.h
+header-y += cdrom.h
+header-y += cgroupstats.h
+header-y += chio.h
+header-y += cm4000_cs.h
+header-y += cn_proc.h
+header-y += coda.h
+header-y += coda_psdev.h
+header-y += coff.h
+header-y += connector.h
+header-y += const.h
+header-y += cramfs_fs.h
+header-y += cuda.h
+header-y += cyclades.h
+header-y += cycx_cfm.h
+header-y += dcbnl.h
+header-y += dccp.h
+header-y += dlm.h
+header-y += dlm_device.h
+header-y += dlm_netlink.h
+header-y += dlm_plock.h
+header-y += dlmconstants.h
+header-y += dm-ioctl.h
+header-y += dm-log-userspace.h
+header-y += dn.h
+header-y += dqblk_xfs.h
+header-y += edd.h
+header-y += efs_fs_sb.h
+header-y += elf-em.h
+header-y += elf-fdpic.h
+header-y += elf.h
+header-y += elfcore.h
+header-y += errno.h
+header-y += errqueue.h
+header-y += ethtool.h
+header-y += eventpoll.h
+header-y += fadvise.h
+header-y += falloc.h
+header-y += fanotify.h
+header-y += fb.h
+header-y += fcntl.h
+header-y += fd.h
+header-y += fdreg.h
+header-y += fib_rules.h
+header-y += fiemap.h
+header-y += filter.h
+header-y += firewire-cdev.h
+header-y += firewire-constants.h
+header-y += flat.h
+header-y += fs.h
+header-y += fsl_hypervisor.h
+header-y += fuse.h
+header-y += futex.h
+header-y += gameport.h
+header-y += gen_stats.h
+header-y += genetlink.h
+header-y += gfs2_ondisk.h
+header-y += gigaset_dev.h
+header-y += hdlc.h
+header-y += hdlcdrv.h
+header-y += hdreg.h
+header-y += hid.h
+header-y += hiddev.h
+header-y += hidraw.h
+header-y += hpet.h
+header-y += hysdn_if.h
+header-y += i2c-dev.h
+header-y += i2c.h
+header-y += i2o-dev.h
+header-y += i8k.h
+header-y += icmp.h
+header-y += icmpv6.h
+header-y += if.h
+header-y += if_addr.h
+header-y += if_addrlabel.h
+header-y += if_alg.h
+header-y += if_arcnet.h
+header-y += if_arp.h
+header-y += if_bonding.h
+header-y += if_bridge.h
+header-y += if_cablemodem.h
+header-y += if_eql.h
+header-y += if_ether.h
+header-y += if_fc.h
+header-y += if_fddi.h
+header-y += if_frad.h
+header-y += if_hippi.h
+header-y += if_infiniband.h
+header-y += if_link.h
+header-y += if_ltalk.h
+header-y += if_packet.h
+header-y += if_phonet.h
+header-y += if_plip.h
+header-y += if_ppp.h
+header-y += if_pppol2tp.h
+header-y += if_pppox.h
+header-y += if_slip.h
+header-y += if_team.h
+header-y += if_tun.h
+header-y += if_tunnel.h
+header-y += if_vlan.h
+header-y += if_x25.h
+header-y += igmp.h
+header-y += in.h
+header-y += in6.h
+header-y += in_route.h
+header-y += inet_diag.h
+header-y += inotify.h
+header-y += input.h
+header-y += ioctl.h
+header-y += ip.h
+header-y += ip6_tunnel.h
+header-y += ip_vs.h
+header-y += ipc.h
+header-y += ipmi.h
+header-y += ipmi_msgdefs.h
+header-y += ipsec.h
+header-y += ipv6.h
+header-y += ipv6_route.h
+header-y += ipx.h
+header-y += irda.h
+header-y += irqnr.h
+header-y += isdn.h
+header-y += isdn_divertif.h
+header-y += isdn_ppp.h
+header-y += isdnif.h
+header-y += iso_fs.h
+header-y += ivtv.h
+header-y += ivtvfb.h
+header-y += ixjuser.h
+header-y += jffs2.h
+header-y += joystick.h
+header-y += kd.h
+header-y += kdev_t.h
+header-y += kernel-page-flags.h
+header-y += kernel.h
+header-y += kernelcapi.h
+header-y += kexec.h
+header-y += keyboard.h
+header-y += keyctl.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
+header-y += kvm.h
+endif
+
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
+header-y += kvm_para.h
+endif
+
+header-y += l2tp.h
+header-y += limits.h
+header-y += llc.h
+header-y += loop.h
+header-y += lp.h
+header-y += magic.h
+header-y += major.h
+header-y += map_to_7segment.h
+header-y += matroxfb.h
+header-y += mdio.h
+header-y += media.h
+header-y += mei.h
+header-y += mempolicy.h
+header-y += meye.h
+header-y += mii.h
+header-y += minix_fs.h
+header-y += mman.h
+header-y += mmtimer.h
+header-y += mqueue.h
+header-y += mroute.h
+header-y += mroute6.h
+header-y += msdos_fs.h
+header-y += msg.h
+header-y += mtio.h
+header-y += n_r3964.h
+header-y += nbd.h
+header-y += ncp.h
+header-y += ncp_fs.h
+header-y += ncp_mount.h
+header-y += ncp_no.h
+header-y += neighbour.h
+header-y += net.h
+header-y += net_dropmon.h
+header-y += net_tstamp.h
+header-y += netdevice.h
+header-y += netfilter.h
+header-y += netfilter_arp.h
+header-y += netfilter_bridge.h
+header-y += netfilter_decnet.h
+header-y += netfilter_ipv4.h
+header-y += netfilter_ipv6.h
+header-y += netlink.h
+header-y += netrom.h
+header-y += nfc.h
+header-y += nfs.h
+header-y += nfs2.h
+header-y += nfs3.h
+header-y += nfs4.h
+header-y += nfs4_mount.h
+header-y += nfs_fs.h
+header-y += nfs_idmap.h
+header-y += nfs_mount.h
+header-y += nfsacl.h
+header-y += nl80211.h
+header-y += nubus.h
+header-y += nvram.h
+header-y += omap3isp.h
+header-y += omapfb.h
+header-y += oom.h
+header-y += packet_diag.h
+header-y += param.h
+header-y += parport.h
+header-y += patchkey.h
+header-y += pci.h
+header-y += pci_regs.h
+header-y += perf_event.h
+header-y += personality.h
+header-y += pfkeyv2.h
+header-y += pg.h
+header-y += phantom.h
+header-y += phonet.h
+header-y += pkt_cls.h
+header-y += pkt_sched.h
+header-y += pktcdvd.h
+header-y += pmu.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ppdev.h
+header-y += ppp-comp.h
+header-y += ppp-ioctl.h
+header-y += ppp_defs.h
+header-y += pps.h
+header-y += prctl.h
+header-y += ptp_clock.h
+header-y += ptrace.h
+header-y += qnx4_fs.h
+header-y += qnxtypes.h
+header-y += quota.h
+header-y += radeonfb.h
+header-y += random.h
+header-y += raw.h
+header-y += rds.h
+header-y += reboot.h
+header-y += reiserfs_fs.h
+header-y += reiserfs_xattr.h
+header-y += resource.h
+header-y += rfkill.h
+header-y += romfs_fs.h
+header-y += rose.h
+header-y += route.h
+header-y += rtc.h
+header-y += rtnetlink.h
+header-y += scc.h
+header-y += sched.h
+header-y += screen_info.h
+header-y += sdla.h
+header-y += seccomp.h
+header-y += securebits.h
+header-y += selinux_netlink.h
+header-y += sem.h
+header-y += serial.h
+header-y += serial_core.h
+header-y += serial_reg.h
+header-y += serio.h
+header-y += shm.h
+header-y += signal.h
+header-y += signalfd.h
+header-y += snmp.h
+header-y += sock_diag.h
+header-y += socket.h
+header-y += sockios.h
+header-y += som.h
+header-y += sonet.h
+header-y += sonypi.h
+header-y += sound.h
+header-y += soundcard.h
+header-y += stat.h
+header-y += stddef.h
+header-y += string.h
+header-y += suspend_ioctls.h
+header-y += swab.h
+header-y += synclink.h
+header-y += sysctl.h
+header-y += sysinfo.h
+header-y += taskstats.h
+header-y += tcp.h
+header-y += tcp_metrics.h
+header-y += telephony.h
+header-y += termios.h
+header-y += time.h
+header-y += times.h
+header-y += timex.h
+header-y += tiocl.h
+header-y += tipc.h
+header-y += tipc_config.h
+header-y += toshiba.h
+header-y += tty.h
+header-y += tty_flags.h
+header-y += types.h
+header-y += udf_fs_i.h
+header-y += udp.h
+header-y += uhid.h
+header-y += uinput.h
+header-y += uio.h
+header-y += ultrasound.h
+header-y += un.h
+header-y += unistd.h
+header-y += unix_diag.h
+header-y += usbdevice_fs.h
+header-y += utime.h
+header-y += utsname.h
+header-y += uuid.h
+header-y += uvcvideo.h
+header-y += v4l2-common.h
+header-y += v4l2-controls.h
+header-y += v4l2-dv-timings.h
+header-y += v4l2-mediabus.h
+header-y += v4l2-subdev.h
+header-y += veth.h
+header-y += vfio.h
+header-y += vhost.h
+header-y += videodev2.h
+header-y += virtio_9p.h
+header-y += virtio_balloon.h
+header-y += virtio_blk.h
+header-y += virtio_config.h
+header-y += virtio_console.h
+header-y += virtio_ids.h
+header-y += virtio_net.h
+header-y += virtio_pci.h
+header-y += virtio_ring.h
+header-y += virtio_rng.h
+header-y += vt.h
+header-y += wait.h
+header-y += wanrouter.h
+header-y += watchdog.h
+header-y += wimax.h
+header-y += wireless.h
+header-y += x25.h
+header-y += xattr.h
+header-y += xfrm.h
diff --git a/include/uapi/linux/a.out.h b/include/uapi/linux/a.out.h
new file mode 100644
index 0000000000000000000000000000000000000000..7caf44c7fa51bcdec2b7db2efb7439beede648dc
--- /dev/null
+++ b/include/uapi/linux/a.out.h
@@ -0,0 +1,274 @@
+#ifndef _UAPI__A_OUT_GNU_H__
+#define _UAPI__A_OUT_GNU_H__
+
+#define __GNU_EXEC_MACROS__
+
+#ifndef __STRUCT_EXEC_OVERRIDE__
+
+#include <asm/a.out.h>
+
+#endif /* __STRUCT_EXEC_OVERRIDE__ */
+
+#ifndef __ASSEMBLY__
+
+/* these go in the N_MACHTYPE field */
+enum machine_type {
+#if defined (M_OLDSUN2)
+  M__OLDSUN2 = M_OLDSUN2,
+#else
+  M_OLDSUN2 = 0,
+#endif
+#if defined (M_68010)
+  M__68010 = M_68010,
+#else
+  M_68010 = 1,
+#endif
+#if defined (M_68020)
+  M__68020 = M_68020,
+#else
+  M_68020 = 2,
+#endif
+#if defined (M_SPARC)
+  M__SPARC = M_SPARC,
+#else
+  M_SPARC = 3,
+#endif
+  /* skip a bunch so we don't run into any of sun's numbers */
+  M_386 = 100,
+  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
+  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
+};
+
+#if !defined (N_MAGIC)
+#define N_MAGIC(exec) ((exec).a_info & 0xffff)
+#endif
+#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
+#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
+#define N_SET_INFO(exec, magic, type, flags) \
+	((exec).a_info = ((magic) & 0xffff) \
+	 | (((int)(type) & 0xff) << 16) \
+	 | (((flags) & 0xff) << 24))
+#define N_SET_MAGIC(exec, magic) \
+	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
+
+#define N_SET_MACHTYPE(exec, machtype) \
+	((exec).a_info = \
+	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
+
+#define N_SET_FLAGS(exec, flags) \
+	((exec).a_info = \
+	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
+
+/* Code indicating object file or impure executable.  */
+#define OMAGIC 0407
+/* Code indicating pure executable.  */
+#define NMAGIC 0410
+/* Code indicating demand-paged executable.  */
+#define ZMAGIC 0413
+/* This indicates a demand-paged executable with the header in the text. 
+   The first page is unmapped to help trap NULL pointer references */
+#define QMAGIC 0314
+
+/* Code indicating core file.  */
+#define CMAGIC 0421
+
+#if !defined (N_BADMAG)
+#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
+			&& N_MAGIC(x) != NMAGIC		\
+  			&& N_MAGIC(x) != ZMAGIC \
+		        && N_MAGIC(x) != QMAGIC)
+#endif
+
+#define _N_HDROFF(x) (1024 - sizeof (struct exec))
+
+#if !defined (N_TXTOFF)
+#define N_TXTOFF(x) \
+ (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
+  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
+#endif
+
+#if !defined (N_DATOFF)
+#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
+#endif
+
+#if !defined (N_TRELOFF)
+#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
+#endif
+
+#if !defined (N_DRELOFF)
+#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
+#endif
+
+#if !defined (N_SYMOFF)
+#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
+#endif
+
+#if !defined (N_STROFF)
+#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
+#endif
+
+/* Address of text segment in memory after it is loaded.  */
+#if !defined (N_TXTADDR)
+#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
+#endif
+
+/* Address of data segment in memory after it is loaded.
+   Note that it is up to you to define SEGMENT_SIZE
+   on machines not listed here.  */
+#if defined(vax) || defined(hp300) || defined(pyr)
+#define SEGMENT_SIZE page_size
+#endif
+#ifdef	sony
+#define	SEGMENT_SIZE	0x2000
+#endif	/* Sony.  */
+#ifdef is68k
+#define SEGMENT_SIZE 0x20000
+#endif
+#if defined(m68k) && defined(PORTAR)
+#define PAGE_SIZE 0x400
+#define SEGMENT_SIZE PAGE_SIZE
+#endif
+
+#ifdef linux
+#ifndef __KERNEL__
+#include <unistd.h>
+#endif
+#if defined(__i386__) || defined(__mc68000__)
+#define SEGMENT_SIZE	1024
+#else
+#ifndef SEGMENT_SIZE
+#ifndef __KERNEL__
+#define SEGMENT_SIZE   getpagesize()
+#endif
+#endif
+#endif
+#endif
+
+#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
+
+#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
+
+#ifndef N_DATADDR
+#define N_DATADDR(x) \
+    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
+     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+#endif
+
+/* Address of bss segment in memory after it is loaded.  */
+#if !defined (N_BSSADDR)
+#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
+#endif
+
+#if !defined (N_NLIST_DECLARED)
+struct nlist {
+  union {
+    char *n_name;
+    struct nlist *n_next;
+    long n_strx;
+  } n_un;
+  unsigned char n_type;
+  char n_other;
+  short n_desc;
+  unsigned long n_value;
+};
+#endif /* no N_NLIST_DECLARED.  */
+
+#if !defined (N_UNDF)
+#define N_UNDF 0
+#endif
+#if !defined (N_ABS)
+#define N_ABS 2
+#endif
+#if !defined (N_TEXT)
+#define N_TEXT 4
+#endif
+#if !defined (N_DATA)
+#define N_DATA 6
+#endif
+#if !defined (N_BSS)
+#define N_BSS 8
+#endif
+#if !defined (N_FN)
+#define N_FN 15
+#endif
+
+#if !defined (N_EXT)
+#define N_EXT 1
+#endif
+#if !defined (N_TYPE)
+#define N_TYPE 036
+#endif
+#if !defined (N_STAB)
+#define N_STAB 0340
+#endif
+
+/* The following type indicates the definition of a symbol as being
+   an indirect reference to another symbol.  The other symbol
+   appears as an undefined reference, immediately following this symbol.
+
+   Indirection is asymmetrical.  The other symbol's value will be used
+   to satisfy requests for the indirect symbol, but not vice versa.
+   If the other symbol does not have a definition, libraries will
+   be searched to find a definition.  */
+#define N_INDR 0xa
+
+/* The following symbols refer to set elements.
+   All the N_SET[ATDB] symbols with the same name form one set.
+   Space is allocated for the set in the text section, and each set
+   element's value is stored into one word of the space.
+   The first word of the space is the length of the set (number of elements).
+
+   The address of the set is made into an N_SETV symbol
+   whose name is the same as the name of the set.
+   This symbol acts like a N_DATA global symbol
+   in that it can satisfy undefined external references.  */
+
+/* These appear as input to LD, in a .o file.  */
+#define	N_SETA	0x14		/* Absolute set element symbol */
+#define	N_SETT	0x16		/* Text set element symbol */
+#define	N_SETD	0x18		/* Data set element symbol */
+#define	N_SETB	0x1A		/* Bss set element symbol */
+
+/* This is output from LD.  */
+#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
+
+#if !defined (N_RELOCATION_INFO_DECLARED)
+/* This structure describes a single relocation to be performed.
+   The text-relocation section of the file is a vector of these structures,
+   all of which apply to the text section.
+   Likewise, the data-relocation section applies to the data section.  */
+
+struct relocation_info
+{
+  /* Address (within segment) to be relocated.  */
+  int r_address;
+  /* The meaning of r_symbolnum depends on r_extern.  */
+  unsigned int r_symbolnum:24;
+  /* Nonzero means value is a pc-relative offset
+     and it should be relocated for changes in its own address
+     as well as for changes in the symbol or section specified.  */
+  unsigned int r_pcrel:1;
+  /* Length (as exponent of 2) of the field to be relocated.
+     Thus, a value of 2 indicates 1<<2 bytes.  */
+  unsigned int r_length:2;
+  /* 1 => relocate with value of symbol.
+          r_symbolnum is the index of the symbol
+	  in file's the symbol table.
+     0 => relocate with the address of a segment.
+          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
+	  (the N_EXT bit may be set also, but signifies nothing).  */
+  unsigned int r_extern:1;
+  /* Four bits that aren't used, but when writing an object file
+     it is desirable to clear them.  */
+#ifdef NS32K
+  unsigned r_bsr:1;
+  unsigned r_disp:1;
+  unsigned r_pad:2;
+#else
+  unsigned int r_pad:4;
+#endif
+};
+#endif /* no N_RELOCATION_INFO_DECLARED.  */
+
+#endif /*__ASSEMBLY__ */
+#endif /* _UAPI__A_OUT_GNU_H__ */
diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h
new file mode 100644
index 0000000000000000000000000000000000000000..11b6ca3e0873c4795fc3b8e8214e5503e6ba16d4
--- /dev/null
+++ b/include/uapi/linux/acct.h
@@ -0,0 +1,122 @@
+/*
+ *  BSD Process Accounting for Linux - Definitions
+ *
+ *  Author: Marco van Wieringen (mvw@planets.elm.net)
+ *
+ *  This header file contains the definitions needed to implement
+ *  BSD-style process accounting. The kernel accounting code and all
+ *  user-level programs that try to do something useful with the
+ *  process accounting log must include this file.
+ *
+ *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ACCT_H
+#define _UAPI_LINUX_ACCT_H
+
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/byteorder.h>
+
+/* 
+ *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
+ *  exponent and a 13-bit fraction.
+ *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
+ *  (leading 1 not stored).
+ *  See linux/kernel/acct.c for the specific encoding systems used.
+ */
+
+typedef __u16	comp_t;
+typedef __u32	comp2_t;
+
+/*
+ *   accounting file record
+ *
+ *   This structure contains all of the information written out to the
+ *   process accounting file whenever a process exits.
+ */
+
+#define ACCT_COMM	16
+
+struct acct
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	/* for binary compatibility back until 2.0 */
+	__u16		ac_uid16;		/* LSB of Real User ID */
+	__u16		ac_gid16;		/* LSB of Real Group ID */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_btime;		/* Process Creation Time */
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_etime;		/* Elapsed Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+/* m68k had no padding here. */
+#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
+	__u16		ac_ahz;			/* AHZ */
+#endif
+	__u32		ac_exitcode;		/* Exitcode */
+	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
+	__u8		ac_etime_hi;		/* Elapsed Time MSB */
+	__u16		ac_etime_lo;		/* Elapsed Time LSB */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+};
+
+struct acct_v3
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_exitcode;		/* Exitcode */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+	__u32		ac_pid;			/* Process ID */
+	__u32		ac_ppid;		/* Parent Process ID */
+	__u32		ac_btime;		/* Process Creation Time */
+#ifdef __KERNEL__
+	__u32		ac_etime;		/* Elapsed Time */
+#else
+	float		ac_etime;		/* Elapsed Time */
+#endif
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+	char		ac_comm[ACCT_COMM];	/* Command Name */
+};
+
+/*
+ *  accounting flags
+ */
+				/* bit set when the process ... */
+#define AFORK		0x01	/* ... executed fork, but did not exec */
+#define ASU		0x02	/* ... used super-user privileges */
+#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
+#define ACORE		0x08	/* ... dumped core */
+#define AXSIG		0x10	/* ... was killed by a signal */
+
+#ifdef __BIG_ENDIAN
+#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
+#else
+#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
+#endif
+
+#ifndef __KERNEL__
+#define ACCT_VERSION	2
+#define AHZ		(HZ)
+#endif	/* __KERNEL */
+
+
+#endif /* _UAPI_LINUX_ACCT_H */
diff --git a/include/uapi/linux/adb.h b/include/uapi/linux/adb.h
new file mode 100644
index 0000000000000000000000000000000000000000..0ea1075fc4a0cb4b0f8bbb2eed10708d0c295606
--- /dev/null
+++ b/include/uapi/linux/adb.h
@@ -0,0 +1,44 @@
+/*
+ * Definitions for ADB (Apple Desktop Bus) support.
+ */
+#ifndef _UAPI__ADB_H
+#define _UAPI__ADB_H
+
+/* ADB commands */
+#define ADB_BUSRESET		0
+#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
+#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
+#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
+
+/* ADB default device IDs (upper 4 bits of ADB command byte) */
+#define ADB_DONGLE	1	/* "software execution control" devices */
+#define ADB_KEYBOARD	2
+#define ADB_MOUSE	3
+#define ADB_TABLET	4
+#define ADB_MODEM	5
+#define ADB_MISC	7	/* maybe a monitor */
+
+#define ADB_RET_OK	0
+#define ADB_RET_TIMEOUT	3
+
+/* The kind of ADB request. The controller may emulate some
+   or all of those CUDA/PMU packet kinds */
+#define ADB_PACKET	0
+#define CUDA_PACKET	1
+#define ERROR_PACKET	2
+#define TIMER_PACKET	3
+#define POWER_PACKET	4
+#define MACIIC_PACKET	5
+#define PMU_PACKET	6
+#define ADB_QUERY	7
+
+/* ADB queries */
+
+/* ADB_QUERY_GETDEVINFO
+ * Query ADB slot for device presence
+ * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
+ */
+#define ADB_QUERY_GETDEVINFO	1
+
+
+#endif /* _UAPI__ADB_H */
diff --git a/include/uapi/linux/adfs_fs.h b/include/uapi/linux/adfs_fs.h
new file mode 100644
index 0000000000000000000000000000000000000000..a1bf43754dddc2061e2189b3f4795ed2b2efa6f9
--- /dev/null
+++ b/include/uapi/linux/adfs_fs.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI_ADFS_FS_H
+#define _UAPI_ADFS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * Disc Record at disc address 0xc00
+ */
+struct adfs_discrecord {
+    __u8  log2secsize;
+    __u8  secspertrack;
+    __u8  heads;
+    __u8  density;
+    __u8  idlen;
+    __u8  log2bpmb;
+    __u8  skew;
+    __u8  bootoption;
+    __u8  lowsector;
+    __u8  nzones;
+    __le16 zone_spare;
+    __le32 root;
+    __le32 disc_size;
+    __le16 disc_id;
+    __u8  disc_name[10];
+    __le32 disc_type;
+    __le32 disc_size_high;
+    __u8  log2sharesize:4;
+    __u8  unused40:4;
+    __u8  big_flag:1;
+    __u8  unused41:1;
+    __u8  nzones_high;
+    __le32 format_version;
+    __le32 root_size;
+    __u8  unused52[60 - 52];
+};
+
+#define ADFS_DISCRECORD		(0xc00)
+#define ADFS_DR_OFFSET		(0x1c0)
+#define ADFS_DR_SIZE		 60
+#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
+
+
+#endif /* _UAPI_ADFS_FS_H */
diff --git a/include/linux/affs_hardblocks.h b/include/uapi/linux/affs_hardblocks.h
similarity index 100%
rename from include/linux/affs_hardblocks.h
rename to include/uapi/linux/affs_hardblocks.h
diff --git a/include/uapi/linux/agpgart.h b/include/uapi/linux/agpgart.h
new file mode 100644
index 0000000000000000000000000000000000000000..4e828cf487bc413267eb06dcf5cb98aeda26390c
--- /dev/null
+++ b/include/uapi/linux/agpgart.h
@@ -0,0 +1,113 @@
+/*
+ * AGPGART module version 0.99
+ * Copyright (C) 1999 Jeff Hartmann
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _UAPI_AGP_H
+#define _UAPI_AGP_H
+
+#define AGPIOC_BASE       'A'
+#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
+#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
+#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
+#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
+#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
+#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
+#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
+#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
+#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
+#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
+#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
+
+#define AGP_DEVICE      "/dev/agpgart"
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef __KERNEL__
+#include <linux/types.h>
+
+struct agp_version {
+	__u16 major;
+	__u16 minor;
+};
+
+typedef struct _agp_info {
+	struct agp_version version;	/* version of the driver        */
+	__u32 bridge_id;	/* bridge vendor/device         */
+	__u32 agp_mode;		/* mode info of bridge          */
+	unsigned long aper_base;/* base of aperture             */
+	size_t aper_size;	/* size of aperture             */
+	size_t pg_total;	/* max pages (swap + system)    */
+	size_t pg_system;	/* max pages (system)           */
+	size_t pg_used;		/* current pages used           */
+} agp_info;
+
+typedef struct _agp_setup {
+	__u32 agp_mode;		/* mode info of bridge          */
+} agp_setup;
+
+/*
+ * The "prot" down below needs still a "sleep" flag somehow ...
+ */
+typedef struct _agp_segment {
+	__kernel_off_t pg_start;	/* starting page to populate    */
+	__kernel_size_t pg_count;	/* number of pages              */
+	int prot;			/* prot flags for mmap          */
+} agp_segment;
+
+typedef struct _agp_region {
+	__kernel_pid_t pid;		/* pid of process       */
+	__kernel_size_t seg_count;	/* number of segments   */
+	struct _agp_segment *seg_list;
+} agp_region;
+
+typedef struct _agp_allocate {
+	int key;		/* tag of allocation            */
+	__kernel_size_t pg_count;/* number of pages             */
+	__u32 type;		/* 0 == normal, other devspec   */
+   	__u32 physical;         /* device specific (some devices  
+				 * need a phys address of the     
+				 * actual page behind the gatt    
+				 * table)                        */
+} agp_allocate;
+
+typedef struct _agp_bind {
+	int key;		/* tag of allocation            */
+	__kernel_off_t pg_start;/* starting page to populate    */
+} agp_bind;
+
+typedef struct _agp_unbind {
+	int key;		/* tag of allocation            */
+	__u32 priority;		/* priority for paging out      */
+} agp_unbind;
+
+#endif				/* __KERNEL__ */
+
+#endif /* _UAPI_AGP_H */
diff --git a/include/linux/aio_abi.h b/include/uapi/linux/aio_abi.h
similarity index 100%
rename from include/linux/aio_abi.h
rename to include/uapi/linux/aio_abi.h
diff --git a/include/uapi/linux/apm_bios.h b/include/uapi/linux/apm_bios.h
new file mode 100644
index 0000000000000000000000000000000000000000..724f409adae025fffb464c43638a024da030be96
--- /dev/null
+++ b/include/uapi/linux/apm_bios.h
@@ -0,0 +1,135 @@
+/*
+ * Include file for the interface to an APM BIOS
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef _UAPI_LINUX_APM_H
+#define _UAPI_LINUX_APM_H
+
+
+#include <linux/types.h>
+
+typedef unsigned short	apm_event_t;
+typedef unsigned short	apm_eventinfo_t;
+
+struct apm_bios_info {
+	__u16	version;
+	__u16	cseg;
+	__u32	offset;
+	__u16	cseg_16;
+	__u16	dseg;
+	__u16	flags;
+	__u16	cseg_len;
+	__u16	cseg_16_len;
+	__u16	dseg_len;
+};
+
+
+/*
+ * Power states
+ */
+#define APM_STATE_READY		0x0000
+#define APM_STATE_STANDBY	0x0001
+#define APM_STATE_SUSPEND	0x0002
+#define APM_STATE_OFF		0x0003
+#define APM_STATE_BUSY		0x0004
+#define APM_STATE_REJECT	0x0005
+#define APM_STATE_OEM_SYS	0x0020
+#define APM_STATE_OEM_DEV	0x0040
+
+#define APM_STATE_DISABLE	0x0000
+#define APM_STATE_ENABLE	0x0001
+
+#define APM_STATE_DISENGAGE	0x0000
+#define APM_STATE_ENGAGE	0x0001
+
+/*
+ * Events (results of Get PM Event)
+ */
+#define APM_SYS_STANDBY		0x0001
+#define APM_SYS_SUSPEND		0x0002
+#define APM_NORMAL_RESUME	0x0003
+#define APM_CRITICAL_RESUME	0x0004
+#define APM_LOW_BATTERY		0x0005
+#define APM_POWER_STATUS_CHANGE	0x0006
+#define APM_UPDATE_TIME		0x0007
+#define APM_CRITICAL_SUSPEND	0x0008
+#define APM_USER_STANDBY	0x0009
+#define APM_USER_SUSPEND	0x000a
+#define APM_STANDBY_RESUME	0x000b
+#define APM_CAPABILITY_CHANGE	0x000c
+
+/*
+ * Error codes
+ */
+#define APM_SUCCESS		0x00
+#define APM_DISABLED		0x01
+#define APM_CONNECTED		0x02
+#define APM_NOT_CONNECTED	0x03
+#define APM_16_CONNECTED	0x05
+#define APM_16_UNSUPPORTED	0x06
+#define APM_32_CONNECTED	0x07
+#define APM_32_UNSUPPORTED	0x08
+#define APM_BAD_DEVICE		0x09
+#define APM_BAD_PARAM		0x0a
+#define APM_NOT_ENGAGED		0x0b
+#define APM_BAD_FUNCTION	0x0c
+#define APM_RESUME_DISABLED	0x0d
+#define APM_NO_ERROR		0x53
+#define APM_BAD_STATE		0x60
+#define APM_NO_EVENTS		0x80
+#define APM_NOT_PRESENT		0x86
+
+/*
+ * APM Device IDs
+ */
+#define APM_DEVICE_BIOS		0x0000
+#define APM_DEVICE_ALL		0x0001
+#define APM_DEVICE_DISPLAY	0x0100
+#define APM_DEVICE_STORAGE	0x0200
+#define APM_DEVICE_PARALLEL	0x0300
+#define APM_DEVICE_SERIAL	0x0400
+#define APM_DEVICE_NETWORK	0x0500
+#define APM_DEVICE_PCMCIA	0x0600
+#define APM_DEVICE_BATTERY	0x8000
+#define APM_DEVICE_OEM		0xe000
+#define APM_DEVICE_OLD_ALL	0xffff
+#define APM_DEVICE_CLASS	0x00ff
+#define APM_DEVICE_MASK		0xff00
+
+
+/*
+ * Battery status
+ */
+#define APM_MAX_BATTERIES	2
+
+/*
+ * APM defined capability bit flags
+ */
+#define APM_CAP_GLOBAL_STANDBY		0x0001
+#define APM_CAP_GLOBAL_SUSPEND		0x0002
+#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
+#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
+#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
+#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
+#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
+#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
+
+/*
+ * ioctl operations
+ */
+#include <linux/ioctl.h>
+
+#define APM_IOC_STANDBY		_IO('A', 1)
+#define APM_IOC_SUSPEND		_IO('A', 2)
+
+#endif /* _UAPI_LINUX_APM_H */
diff --git a/include/linux/arcfb.h b/include/uapi/linux/arcfb.h
similarity index 100%
rename from include/linux/arcfb.h
rename to include/uapi/linux/arcfb.h
diff --git a/include/uapi/linux/atalk.h b/include/uapi/linux/atalk.h
new file mode 100644
index 0000000000000000000000000000000000000000..4bcd596e6388b21a29bc09a80e3c1bad11db1bd9
--- /dev/null
+++ b/include/uapi/linux/atalk.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI__LINUX_ATALK_H__
+#define _UAPI__LINUX_ATALK_H__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+/*
+ * AppleTalk networking structures
+ *
+ * The following are directly referenced from the University Of Michigan
+ * netatalk for compatibility reasons.
+ */
+#define ATPORT_FIRST	1
+#define ATPORT_RESERVED	128
+#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
+#define ATADDR_ANYNET	(__u16)0
+#define ATADDR_ANYNODE	(__u8)0
+#define ATADDR_ANYPORT  (__u8)0
+#define ATADDR_BCAST	(__u8)255
+#define DDP_MAXSZ	587
+#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
+
+#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
+
+struct atalk_addr {
+	__be16	s_net;
+	__u8	s_node;
+};
+
+struct sockaddr_at {
+	__kernel_sa_family_t sat_family;
+	__u8		  sat_port;
+	struct atalk_addr sat_addr;
+	char		  sat_zero[8];
+};
+
+struct atalk_netrange {
+	__u8	nr_phase;
+	__be16	nr_firstnet;
+	__be16	nr_lastnet;
+};
+
+#endif /* _UAPI__LINUX_ATALK_H__ */
diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h
new file mode 100644
index 0000000000000000000000000000000000000000..88399db602ace8b5a9f98f43ee3e78dd1b9060e1
--- /dev/null
+++ b/include/uapi/linux/atm.h
@@ -0,0 +1,241 @@
+/* atm.h - general ATM declarations */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+/*
+ * WARNING: User-space programs should not #include <linux/atm.h> directly.
+ *          Instead, #include <atm.h>
+ */
+
+#ifndef _UAPI_LINUX_ATM_H
+#define _UAPI_LINUX_ATM_H
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+#include <linux/compiler.h>
+#include <linux/atmapi.h>
+#include <linux/atmsap.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/* general ATM constants */
+#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
+#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
+#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
+#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
+#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
+#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
+#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
+#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
+
+#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
+#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
+#define ATM_MAX_VCI		 65535	/* maximum VCI */
+
+
+/* "protcol" values for the socket system call */
+#define ATM_NO_AAL	0		/* AAL not specified */
+#define ATM_AAL0	13		/* "raw" ATM cells */
+#define ATM_AAL1	1		/* AAL1 (CBR) */
+#define ATM_AAL2	2		/* AAL2 (VBR) */
+#define ATM_AAL34	3		/* AAL3/4 (data) */
+#define ATM_AAL5	5		/* AAL5 (data) */
+
+/*
+ * socket option name coding functions
+ *
+ * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
+ * << 22 only reserves 9 bits for the level.  On some architectures
+ * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
+ */
+
+#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
+				sizeof(t))
+#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
+#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
+#define __SO_SIZE(c)		((c) & 0x3fff)
+
+/*
+ * ATM layer
+ */
+
+#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
+			    /* set CLP bit value - TODO */
+#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
+			    /* connection identifier range; socket must be
+			       bound or connected */
+#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
+			    /* Quality of Service setting */
+#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
+			    /* Service Access Point */
+#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
+			    /* "PVC" address (also for SVCs); get only */
+#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
+			    /* make this vc a p2mp */
+
+
+/*
+ * Note @@@: since the socket layers don't really distinguish the control and
+ * the data plane but generally seems to be data plane-centric, any layer is
+ * about equally wrong for the SAP. If you have a better idea about this,
+ * please speak up ...
+ */
+
+
+/* ATM cell header (for AAL0) */
+
+/* BEGIN_CH */
+#define ATM_HDR_GFC_MASK	0xf0000000
+#define ATM_HDR_GFC_SHIFT	28
+#define ATM_HDR_VPI_MASK	0x0ff00000
+#define ATM_HDR_VPI_SHIFT	20
+#define ATM_HDR_VCI_MASK	0x000ffff0
+#define ATM_HDR_VCI_SHIFT	4
+#define ATM_HDR_PTI_MASK	0x0000000e
+#define ATM_HDR_PTI_SHIFT	1
+#define ATM_HDR_CLP		0x00000001
+/* END_CH */
+
+
+/* PTI codings */
+
+/* BEGIN_PTI */
+#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
+#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
+#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
+#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
+#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
+#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
+#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
+#define ATM_PTI_RSV	7  /* reserved */
+/* END_PTI */
+
+
+/*
+ * The following items should stay in linux/atm.h, which should be linked to
+ * netatm/atm.h
+ */
+
+/* Traffic description */
+
+#define ATM_NONE	0		/* no traffic */
+#define ATM_UBR		1
+#define ATM_CBR		2
+#define ATM_VBR		3
+#define ATM_ABR		4
+#define ATM_ANYCLASS	5		/* compatible with everything */
+
+#define ATM_MAX_PCR	-1		/* maximum available PCR */
+
+struct atm_trafprm {
+	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
+	int		max_pcr;	/* maximum PCR in cells per second */
+	int		pcr;		/* desired PCR in cells per second */
+	int		min_pcr;	/* minimum PCR in cells per second */
+	int		max_cdv;	/* maximum CDV in microseconds */
+	int		max_sdu;	/* maximum SDU in bytes */
+        /* extra params for ABR */
+        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
+        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
+        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
+        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
+        unsigned int nrm_pres  :1;      /* nrm present bit */
+        unsigned int trm_pres  :1;     	/* rm present bit */
+        unsigned int adtf_pres :1;     	/* adtf present bit */
+        unsigned int cdf_pres  :1;    	/* cdf present bit*/
+        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
+        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
+	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
+	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
+        unsigned int spare     :9;      /* spare bits */ 
+};
+
+struct atm_qos {
+	struct atm_trafprm txtp;	/* parameters in TX direction */
+	struct atm_trafprm rxtp __ATM_API_ALIGN;
+					/* parameters in RX direction */
+	unsigned char aal __ATM_API_ALIGN;
+};
+
+/* PVC addressing */
+
+#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
+#define ATM_VPI_ANY	-1
+#define ATM_VCI_ANY	-1
+#define ATM_VPI_UNSPEC	-2
+#define ATM_VCI_UNSPEC	-2
+
+
+struct sockaddr_atmpvc {
+	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
+	struct {			/* PVC address */
+		short	itf;		/* ATM interface */
+		short	vpi;		/* VPI (only 8 bits at UNI) */
+		int	vci;		/* VCI (only 16 bits at UNI) */
+	} sap_addr __ATM_API_ALIGN;	/* PVC address */
+};
+
+/* SVC addressing */
+
+#define	ATM_ESA_LEN	20		/* ATM End System Address length */
+#define ATM_E164_LEN	12		/* maximum E.164 number length */
+
+#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
+#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
+#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
+#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
+
+#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
+#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
+#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
+#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
+
+#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
+#define ATM_LIJ		1		/* request joining */
+#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
+#define ATM_LIJ_NJ	3		/* set to network join */
+
+
+struct sockaddr_atmsvc {
+    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
+    struct {				/* SVC address */
+        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
+        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
+    					/* unused addresses must be bzero'ed */
+	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
+	__u32	lij_id;		/* LIJ call identifier */
+    } sas_addr __ATM_API_ALIGN;		/* SVC address */
+};
+
+
+static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
+{
+	return *addr.sas_addr.prv || *addr.sas_addr.pub;
+}
+
+
+static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
+{
+	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
+}
+
+
+/*
+ * Some stuff for linux/sockios.h
+ */
+
+struct atmif_sioc {
+	int number;
+	int length;
+	void __user *arg;
+};
+
+
+typedef unsigned short atm_backend_t;
+#endif /* _UAPI_LINUX_ATM_H */
diff --git a/include/linux/atm_eni.h b/include/uapi/linux/atm_eni.h
similarity index 100%
rename from include/linux/atm_eni.h
rename to include/uapi/linux/atm_eni.h
diff --git a/include/linux/atm_he.h b/include/uapi/linux/atm_he.h
similarity index 100%
rename from include/linux/atm_he.h
rename to include/uapi/linux/atm_he.h
diff --git a/include/linux/atm_idt77105.h b/include/uapi/linux/atm_idt77105.h
similarity index 100%
rename from include/linux/atm_idt77105.h
rename to include/uapi/linux/atm_idt77105.h
diff --git a/include/linux/atm_nicstar.h b/include/uapi/linux/atm_nicstar.h
similarity index 100%
rename from include/linux/atm_nicstar.h
rename to include/uapi/linux/atm_nicstar.h
diff --git a/include/uapi/linux/atm_tcp.h b/include/uapi/linux/atm_tcp.h
new file mode 100644
index 0000000000000000000000000000000000000000..914e821da64db86cf4db78b2e10fd702103ea23b
--- /dev/null
+++ b/include/uapi/linux/atm_tcp.h
@@ -0,0 +1,61 @@
+/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by
+	       driver-specific utilities) */
+
+/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _UAPILINUX_ATM_TCP_H
+#define _UAPILINUX_ATM_TCP_H
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/*
+ * All values in struct atmtcp_hdr are in network byte order
+ */
+
+struct atmtcp_hdr {
+	__u16	vpi;
+	__u16	vci;
+	__u32	length;		/* ... of data part */
+};
+
+/*
+ * All values in struct atmtcp_command are in host byte order
+ */
+
+#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
+#define ATMTCP_CTRL_OPEN	1	/* request/reply */
+#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
+
+struct atmtcp_control {
+	struct atmtcp_hdr hdr;	/* must be first */
+	int type;		/* message type; both directions */
+	atm_kptr_t vcc;		/* both directions */
+	struct sockaddr_atmpvc addr; /* suggested value from kernel */
+	struct atm_qos	qos;	/* both directions */
+	int result;		/* to kernel only */
+} __ATM_API_ALIGN;
+
+/*
+ * Field usage:
+ * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
+ * -----------  ----	------- ----	----	---	---	------
+ * OPEN		K->D	Y	Y	Y	Y	Y	0
+ * OPEN		D->K	-	Y	Y	Y	Y	Y
+ * CLOSE	K->D	-	-	Y	-	Y	0
+ * CLOSE	D->K	-	-	-	-	Y	Y
+ */
+
+#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
+#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
+						   interface */
+#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
+						   interface */
+
+
+
+#endif /* _UAPILINUX_ATM_TCP_H */
diff --git a/include/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h
similarity index 100%
rename from include/linux/atm_zatm.h
rename to include/uapi/linux/atm_zatm.h
diff --git a/include/linux/atmapi.h b/include/uapi/linux/atmapi.h
similarity index 100%
rename from include/linux/atmapi.h
rename to include/uapi/linux/atmapi.h
diff --git a/include/linux/atmarp.h b/include/uapi/linux/atmarp.h
similarity index 100%
rename from include/linux/atmarp.h
rename to include/uapi/linux/atmarp.h
diff --git a/include/linux/atmbr2684.h b/include/uapi/linux/atmbr2684.h
similarity index 100%
rename from include/linux/atmbr2684.h
rename to include/uapi/linux/atmbr2684.h
diff --git a/include/linux/atmclip.h b/include/uapi/linux/atmclip.h
similarity index 100%
rename from include/linux/atmclip.h
rename to include/uapi/linux/atmclip.h
diff --git a/include/uapi/linux/atmdev.h b/include/uapi/linux/atmdev.h
new file mode 100644
index 0000000000000000000000000000000000000000..93e0ec008ca898cafff18b4b12c8e6308473654e
--- /dev/null
+++ b/include/uapi/linux/atmdev.h
@@ -0,0 +1,215 @@
+/* atmdev.h - ATM device driver declarations and various related items */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _UAPILINUX_ATMDEV_H
+#define _UAPILINUX_ATMDEV_H
+
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ESI_LEN		6
+
+#define ATM_OC3_PCR	(155520000/270*260/8/53)
+			/* OC3 link rate:  155520000 bps
+			   SONET overhead: /270*260 (9 section, 1 path)
+			   bits per cell:  /8/53
+			   max cell rate:  353207.547 cells/sec */
+#define ATM_25_PCR	((25600000/8-8000)/54)
+			/* 25 Mbps ATM cell rate (59111) */
+#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
+			/* OC12 link rate: 622080000 bps
+			   SONET overhead: /1080*1040
+			   bits per cell:  /8/53
+			   max cell rate:  1412830.188 cells/sec */
+#define ATM_DS3_PCR	(8000*12)
+			/* DS3: 12 cells in a 125 usec time slot */
+
+
+#define __AAL_STAT_ITEMS \
+    __HANDLE_ITEM(tx);			/* TX okay */ \
+    __HANDLE_ITEM(tx_err);		/* TX errors */ \
+    __HANDLE_ITEM(rx);			/* RX okay */ \
+    __HANDLE_ITEM(rx_err);		/* RX errors */ \
+    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
+
+struct atm_aal_stats {
+#define __HANDLE_ITEM(i) int i
+	__AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct atm_dev_stats {
+	struct atm_aal_stats aal0;
+	struct atm_aal_stats aal34;
+	struct atm_aal_stats aal5;
+} __ATM_API_ALIGN;
+
+
+#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
+					/* get link rate */
+#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
+					/* get interface names (numbers) */
+#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
+					/* get interface type name */
+#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
+					/* get interface ESI */
+#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
+					/* get itf's local ATM addr. list */
+#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
+					/* reset itf's ATM address list */
+#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
+					/* add a local ATM address */
+#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
+					/* remove a local ATM address */
+#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
+					/* get connection identifier range */
+#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
+					/* set connection identifier range */
+#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
+					/* set interface ESI */
+#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
+					/* force interface ESI */
+#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
+					/* register a LECS address */
+#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
+					/* unregister a LECS address */
+#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
+					/* retrieve LECS address(es) */
+
+#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
+					/* get AAL layer statistics */
+#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
+					/* get AAL layer statistics and zero */
+#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
+					/* get loopback mode */
+#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
+					/* set loopback mode */
+#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
+					/* query supported loopback modes */
+#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
+					/* enable or disable single-copy */
+#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
+					/* set backend handler */
+#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+					/* use backend to make new if */
+#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
+ 					/* add party to p2mp call */
+#ifdef CONFIG_COMPAT
+/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
+#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
+#endif
+#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
+					/* drop party from p2mp call */
+
+/*
+ * These are backend handkers that can be set via the ATM_SETBACKEND call
+ * above.  In the future we may support dynamic loading of these - for now,
+ * they're just being used to share the ATMIOC_BACKEND ioctls
+ */
+#define ATM_BACKEND_RAW		0	
+#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
+#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
+
+/* for ATM_GETTYPE */
+#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
+
+/*
+ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
+ */
+
+/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
+#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
+#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
+#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
+/* RESERVED		4	loop back on PHY side  ---'		      */
+#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
+#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
+
+/* Direction of loopback */
+#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
+#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
+
+#define __ATM_LM_XTLOC(n)	((n) & 0xff)
+#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
+
+#define ATM_LM_NONE	0	/* no loopback */
+
+#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
+#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
+#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
+#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
+
+#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
+#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
+#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
+#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
+
+/*
+ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
+ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
+ */
+
+
+struct atm_iobuf {
+	int length;
+	void __user *buffer;
+};
+
+/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
+
+#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
+ 
+struct atm_cirange {
+	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
+	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
+};
+
+/* for ATM_SETSC; actually taken from the ATM_VF number space */
+
+#define ATM_SC_RX	1024		/* enable RX single-copy */
+#define ATM_SC_TX	2048		/* enable TX single-copy */
+
+#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
+				  anyway */
+
+/* MF: change_qos (Modify) flags */
+
+#define ATM_MF_IMMED	 1	/* Block until change is effective */
+#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
+#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
+#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
+#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
+#define ATM_MF_BWD	32	/* Set the backward direction parameters */
+
+#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
+			  ATM_MF_DEC_SHP | ATM_MF_BWD)
+
+/*
+ * ATM_VS_* are used to express VC state in a human-friendly way.
+ */
+
+#define ATM_VS_IDLE	0	/* VC is not used */
+#define ATM_VS_CONNECTED 1	/* VC is connected */
+#define ATM_VS_CLOSING	2	/* VC is closing */
+#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
+#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
+#define ATM_VS_BOUND	5	/* VC is bound */
+
+#define ATM_VS2TXT_MAP \
+    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
+
+#define ATM_VF2TXT_MAP \
+    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
+    "RELEASED", "HASQOS",	"LISTEN",	"META", \
+    "256",	"512",		"1024",		"2048", \
+    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
+
+
+
+#endif /* _UAPILINUX_ATMDEV_H */
diff --git a/include/linux/atmioc.h b/include/uapi/linux/atmioc.h
similarity index 100%
rename from include/linux/atmioc.h
rename to include/uapi/linux/atmioc.h
diff --git a/include/linux/atmlec.h b/include/uapi/linux/atmlec.h
similarity index 100%
rename from include/linux/atmlec.h
rename to include/uapi/linux/atmlec.h
diff --git a/include/linux/atmmpc.h b/include/uapi/linux/atmmpc.h
similarity index 100%
rename from include/linux/atmmpc.h
rename to include/uapi/linux/atmmpc.h
diff --git a/include/linux/atmppp.h b/include/uapi/linux/atmppp.h
similarity index 100%
rename from include/linux/atmppp.h
rename to include/uapi/linux/atmppp.h
diff --git a/include/linux/atmsap.h b/include/uapi/linux/atmsap.h
similarity index 100%
rename from include/linux/atmsap.h
rename to include/uapi/linux/atmsap.h
diff --git a/include/linux/atmsvc.h b/include/uapi/linux/atmsvc.h
similarity index 100%
rename from include/linux/atmsvc.h
rename to include/uapi/linux/atmsvc.h
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
new file mode 100644
index 0000000000000000000000000000000000000000..76352ac45f24bf1290196327ad9af8fb504e4d69
--- /dev/null
+++ b/include/uapi/linux/audit.h
@@ -0,0 +1,404 @@
+/* audit.h -- Auditing support
+ *
+ * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Written by Rickard E. (Rik) Faith <faith@redhat.com>
+ *
+ */
+
+#ifndef _UAPI_LINUX_AUDIT_H_
+#define _UAPI_LINUX_AUDIT_H_
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+#include <linux/ptrace.h>
+
+/* The netlink messages for the audit system is divided into blocks:
+ * 1000 - 1099 are for commanding the audit system
+ * 1100 - 1199 user space trusted application messages
+ * 1200 - 1299 messages internal to the audit daemon
+ * 1300 - 1399 audit event messages
+ * 1400 - 1499 SE Linux use
+ * 1500 - 1599 kernel LSPP events
+ * 1600 - 1699 kernel crypto events
+ * 1700 - 1799 kernel anomaly records
+ * 1800 - 1899 kernel integrity events
+ * 1900 - 1999 future kernel use
+ * 2000 is for otherwise unclassified kernel audit messages (legacy)
+ * 2001 - 2099 unused (kernel)
+ * 2100 - 2199 user space anomaly records
+ * 2200 - 2299 user space actions taken in response to anomalies
+ * 2300 - 2399 user space generated LSPP events
+ * 2400 - 2499 user space crypto events
+ * 2500 - 2999 future user space (maybe integrity labels and related events)
+ *
+ * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
+ * exclusively user space. 1300-2099 is kernel --> user space 
+ * communication.
+ */
+#define AUDIT_GET		1000	/* Get status */
+#define AUDIT_SET		1001	/* Set status (enable/disable/auditd) */
+#define AUDIT_LIST		1002	/* List syscall rules -- deprecated */
+#define AUDIT_ADD		1003	/* Add syscall rule -- deprecated */
+#define AUDIT_DEL		1004	/* Delete syscall rule -- deprecated */
+#define AUDIT_USER		1005	/* Message from userspace -- deprecated */
+#define AUDIT_LOGIN		1006	/* Define the login id and information */
+#define AUDIT_WATCH_INS		1007	/* Insert file/dir watch entry */
+#define AUDIT_WATCH_REM		1008	/* Remove file/dir watch entry */
+#define AUDIT_WATCH_LIST	1009	/* List all file/dir watches */
+#define AUDIT_SIGNAL_INFO	1010	/* Get info about sender of signal to auditd */
+#define AUDIT_ADD_RULE		1011	/* Add syscall filtering rule */
+#define AUDIT_DEL_RULE		1012	/* Delete syscall filtering rule */
+#define AUDIT_LIST_RULES	1013	/* List syscall filtering rules */
+#define AUDIT_TRIM		1014	/* Trim junk from watched tree */
+#define AUDIT_MAKE_EQUIV	1015	/* Append to watched tree */
+#define AUDIT_TTY_GET		1016	/* Get TTY auditing status */
+#define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
+
+#define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
+#define AUDIT_USER_AVC		1107	/* We filter this differently */
+#define AUDIT_USER_TTY		1124	/* Non-ICANON TTY input meaning */
+#define AUDIT_LAST_USER_MSG	1199
+#define AUDIT_FIRST_USER_MSG2	2100	/* More user space messages */
+#define AUDIT_LAST_USER_MSG2	2999
+ 
+#define AUDIT_DAEMON_START      1200    /* Daemon startup record */
+#define AUDIT_DAEMON_END        1201    /* Daemon normal stop record */
+#define AUDIT_DAEMON_ABORT      1202    /* Daemon error stop record */
+#define AUDIT_DAEMON_CONFIG     1203    /* Daemon config change */
+
+#define AUDIT_SYSCALL		1300	/* Syscall event */
+/* #define AUDIT_FS_WATCH	1301	 * Deprecated */
+#define AUDIT_PATH		1302	/* Filename path information */
+#define AUDIT_IPC		1303	/* IPC record */
+#define AUDIT_SOCKETCALL	1304	/* sys_socketcall arguments */
+#define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
+#define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
+#define AUDIT_CWD		1307	/* Current working directory */
+#define AUDIT_EXECVE		1309	/* execve arguments */
+#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
+#define AUDIT_MQ_OPEN		1312	/* POSIX MQ open record type */
+#define AUDIT_MQ_SENDRECV	1313	/* POSIX MQ send/receive record type */
+#define AUDIT_MQ_NOTIFY		1314	/* POSIX MQ notify record type */
+#define AUDIT_MQ_GETSETATTR	1315	/* POSIX MQ get/set attribute record type */
+#define AUDIT_KERNEL_OTHER	1316	/* For use by 3rd party modules */
+#define AUDIT_FD_PAIR		1317    /* audit record for pipe/socketpair */
+#define AUDIT_OBJ_PID		1318	/* ptrace target */
+#define AUDIT_TTY		1319	/* Input on an administrative TTY */
+#define AUDIT_EOE		1320	/* End of multi-record event */
+#define AUDIT_BPRM_FCAPS	1321	/* Information about fcaps increasing perms */
+#define AUDIT_CAPSET		1322	/* Record showing argument to sys_capset */
+#define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
+#define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
+#define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
+
+#define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
+#define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
+#define AUDIT_AVC_PATH		1402	/* dentry, vfsmount pair from avc */
+#define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
+#define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
+#define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
+#define AUDIT_MAC_UNLBL_ALLOW	1406	/* NetLabel: allow unlabeled traffic */
+#define AUDIT_MAC_CIPSOV4_ADD	1407	/* NetLabel: add CIPSOv4 DOI entry */
+#define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
+#define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
+#define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
+#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
+#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
+#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
+#define AUDIT_MAC_UNLBL_STCADD	1416	/* NetLabel: add a static label */
+#define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
+
+#define AUDIT_FIRST_KERN_ANOM_MSG   1700
+#define AUDIT_LAST_KERN_ANOM_MSG    1799
+#define AUDIT_ANOM_PROMISCUOUS      1700 /* Device changed promiscuous mode */
+#define AUDIT_ANOM_ABEND            1701 /* Process ended abnormally */
+#define AUDIT_ANOM_LINK		    1702 /* Suspicious use of file links */
+#define AUDIT_INTEGRITY_DATA	    1800 /* Data integrity verification */
+#define AUDIT_INTEGRITY_METADATA    1801 /* Metadata integrity verification */
+#define AUDIT_INTEGRITY_STATUS	    1802 /* Integrity enable status */
+#define AUDIT_INTEGRITY_HASH	    1803 /* Integrity HASH type */
+#define AUDIT_INTEGRITY_PCR	    1804 /* PCR invalidation msgs */
+#define AUDIT_INTEGRITY_RULE	    1805 /* policy rule */
+
+#define AUDIT_KERNEL		2000	/* Asynchronous audit record. NOT A REQUEST. */
+
+/* Rule flags */
+#define AUDIT_FILTER_USER	0x00	/* Apply rule to user-generated messages */
+#define AUDIT_FILTER_TASK	0x01	/* Apply rule at task creation (not syscall) */
+#define AUDIT_FILTER_ENTRY	0x02	/* Apply rule at syscall entry */
+#define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
+#define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
+#define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
+
+#define AUDIT_NR_FILTERS	6
+
+#define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
+
+/* Rule actions */
+#define AUDIT_NEVER    0	/* Do not build context if rule matches */
+#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
+#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
+
+/* Rule structure sizes -- if these change, different AUDIT_ADD and
+ * AUDIT_LIST commands must be implemented. */
+#define AUDIT_MAX_FIELDS   64
+#define AUDIT_MAX_KEY_LEN  256
+#define AUDIT_BITMASK_SIZE 64
+#define AUDIT_WORD(nr) ((__u32)((nr)/32))
+#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
+
+#define AUDIT_SYSCALL_CLASSES 16
+#define AUDIT_CLASS_DIR_WRITE 0
+#define AUDIT_CLASS_DIR_WRITE_32 1
+#define AUDIT_CLASS_CHATTR 2
+#define AUDIT_CLASS_CHATTR_32 3
+#define AUDIT_CLASS_READ 4
+#define AUDIT_CLASS_READ_32 5
+#define AUDIT_CLASS_WRITE 6
+#define AUDIT_CLASS_WRITE_32 7
+#define AUDIT_CLASS_SIGNAL 8
+#define AUDIT_CLASS_SIGNAL_32 9
+
+/* This bitmask is used to validate user input.  It represents all bits that
+ * are currently used in an audit field constant understood by the kernel.
+ * If you are adding a new #define AUDIT_<whatever>, please ensure that
+ * AUDIT_UNUSED_BITS is updated if need be. */
+#define AUDIT_UNUSED_BITS	0x07FFFC00
+
+/* AUDIT_FIELD_COMPARE rule list */
+#define AUDIT_COMPARE_UID_TO_OBJ_UID	1
+#define AUDIT_COMPARE_GID_TO_OBJ_GID	2
+#define AUDIT_COMPARE_EUID_TO_OBJ_UID	3
+#define AUDIT_COMPARE_EGID_TO_OBJ_GID	4
+#define AUDIT_COMPARE_AUID_TO_OBJ_UID	5
+#define AUDIT_COMPARE_SUID_TO_OBJ_UID	6
+#define AUDIT_COMPARE_SGID_TO_OBJ_GID	7
+#define AUDIT_COMPARE_FSUID_TO_OBJ_UID	8
+#define AUDIT_COMPARE_FSGID_TO_OBJ_GID	9
+
+#define AUDIT_COMPARE_UID_TO_AUID	10
+#define AUDIT_COMPARE_UID_TO_EUID	11
+#define AUDIT_COMPARE_UID_TO_FSUID	12
+#define AUDIT_COMPARE_UID_TO_SUID	13
+
+#define AUDIT_COMPARE_AUID_TO_FSUID	14
+#define AUDIT_COMPARE_AUID_TO_SUID	15
+#define AUDIT_COMPARE_AUID_TO_EUID	16
+
+#define AUDIT_COMPARE_EUID_TO_SUID	17
+#define AUDIT_COMPARE_EUID_TO_FSUID	18
+
+#define AUDIT_COMPARE_SUID_TO_FSUID	19
+
+#define AUDIT_COMPARE_GID_TO_EGID	20
+#define AUDIT_COMPARE_GID_TO_FSGID	21
+#define AUDIT_COMPARE_GID_TO_SGID	22
+
+#define AUDIT_COMPARE_EGID_TO_FSGID	23
+#define AUDIT_COMPARE_EGID_TO_SGID	24
+#define AUDIT_COMPARE_SGID_TO_FSGID	25
+
+#define AUDIT_MAX_FIELD_COMPARE		AUDIT_COMPARE_SGID_TO_FSGID
+
+/* Rule fields */
+				/* These are useful when checking the
+				 * task structure at task creation time
+				 * (AUDIT_PER_TASK).  */
+#define AUDIT_PID	0
+#define AUDIT_UID	1
+#define AUDIT_EUID	2
+#define AUDIT_SUID	3
+#define AUDIT_FSUID	4
+#define AUDIT_GID	5
+#define AUDIT_EGID	6
+#define AUDIT_SGID	7
+#define AUDIT_FSGID	8
+#define AUDIT_LOGINUID	9
+#define AUDIT_PERS	10
+#define AUDIT_ARCH	11
+#define AUDIT_MSGTYPE	12
+#define AUDIT_SUBJ_USER	13	/* security label user */
+#define AUDIT_SUBJ_ROLE	14	/* security label role */
+#define AUDIT_SUBJ_TYPE	15	/* security label type */
+#define AUDIT_SUBJ_SEN	16	/* security label sensitivity label */
+#define AUDIT_SUBJ_CLR	17	/* security label clearance label */
+#define AUDIT_PPID	18
+#define AUDIT_OBJ_USER	19
+#define AUDIT_OBJ_ROLE	20
+#define AUDIT_OBJ_TYPE	21
+#define AUDIT_OBJ_LEV_LOW	22
+#define AUDIT_OBJ_LEV_HIGH	23
+
+				/* These are ONLY useful when checking
+				 * at syscall exit time (AUDIT_AT_EXIT). */
+#define AUDIT_DEVMAJOR	100
+#define AUDIT_DEVMINOR	101
+#define AUDIT_INODE	102
+#define AUDIT_EXIT	103
+#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
+#define AUDIT_WATCH	105
+#define AUDIT_PERM	106
+#define AUDIT_DIR	107
+#define AUDIT_FILETYPE	108
+#define AUDIT_OBJ_UID	109
+#define AUDIT_OBJ_GID	110
+#define AUDIT_FIELD_COMPARE	111
+
+#define AUDIT_ARG0      200
+#define AUDIT_ARG1      (AUDIT_ARG0+1)
+#define AUDIT_ARG2      (AUDIT_ARG0+2)
+#define AUDIT_ARG3      (AUDIT_ARG0+3)
+
+#define AUDIT_FILTERKEY	210
+
+#define AUDIT_NEGATE			0x80000000
+
+/* These are the supported operators.
+ *	4  2  1  8
+ *	=  >  <  ?
+ *	----------
+ *	0  0  0	 0	00	nonsense
+ *	0  0  0	 1	08	&  bit mask
+ *	0  0  1	 0	10	<
+ *	0  1  0	 0	20	>
+ *	0  1  1	 0	30	!=
+ *	1  0  0	 0	40	=
+ *	1  0  0	 1	48	&=  bit test
+ *	1  0  1	 0	50	<=
+ *	1  1  0	 0	60	>=
+ *	1  1  1	 1	78	all operators
+ */
+#define AUDIT_BIT_MASK			0x08000000
+#define AUDIT_LESS_THAN			0x10000000
+#define AUDIT_GREATER_THAN		0x20000000
+#define AUDIT_NOT_EQUAL			0x30000000
+#define AUDIT_EQUAL			0x40000000
+#define AUDIT_BIT_TEST			(AUDIT_BIT_MASK|AUDIT_EQUAL)
+#define AUDIT_LESS_THAN_OR_EQUAL	(AUDIT_LESS_THAN|AUDIT_EQUAL)
+#define AUDIT_GREATER_THAN_OR_EQUAL	(AUDIT_GREATER_THAN|AUDIT_EQUAL)
+#define AUDIT_OPERATORS			(AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
+
+enum {
+	Audit_equal,
+	Audit_not_equal,
+	Audit_bitmask,
+	Audit_bittest,
+	Audit_lt,
+	Audit_gt,
+	Audit_le,
+	Audit_ge,
+	Audit_bad
+};
+
+/* Status symbols */
+				/* Mask values */
+#define AUDIT_STATUS_ENABLED		0x0001
+#define AUDIT_STATUS_FAILURE		0x0002
+#define AUDIT_STATUS_PID		0x0004
+#define AUDIT_STATUS_RATE_LIMIT		0x0008
+#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
+				/* Failure-to-log actions */
+#define AUDIT_FAIL_SILENT	0
+#define AUDIT_FAIL_PRINTK	1
+#define AUDIT_FAIL_PANIC	2
+
+/* distinguish syscall tables */
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARMEB	(EM_ARM)
+#define AUDIT_ARCH_CRIS		(EM_CRIS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_FRV		(EM_FRV)
+#define AUDIT_ARCH_H8300	(EM_H8_300)
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_IA64		(EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_M32R		(EM_M32R)
+#define AUDIT_ARCH_M68K		(EM_68K)
+#define AUDIT_ARCH_MIPS		(EM_MIPS)
+#define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_OPENRISC	(EM_OPENRISC)
+#define AUDIT_ARCH_PARISC	(EM_PARISC)
+#define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_PPC		(EM_PPC)
+#define AUDIT_ARCH_PPC64	(EM_PPC64|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_S390		(EM_S390)
+#define AUDIT_ARCH_S390X	(EM_S390|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SH		(EM_SH)
+#define AUDIT_ARCH_SHEL		(EM_SH|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SH64		(EM_SH|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SPARC	(EM_SPARC)
+#define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+
+#define AUDIT_PERM_EXEC		1
+#define AUDIT_PERM_WRITE	2
+#define AUDIT_PERM_READ		4
+#define AUDIT_PERM_ATTR		8
+
+struct audit_status {
+	__u32		mask;		/* Bit mask for valid entries */
+	__u32		enabled;	/* 1 = enabled, 0 = disabled */
+	__u32		failure;	/* Failure-to-log action */
+	__u32		pid;		/* pid of auditd process */
+	__u32		rate_limit;	/* messages rate limit (per second) */
+	__u32		backlog_limit;	/* waiting messages limit */
+	__u32		lost;		/* messages lost */
+	__u32		backlog;	/* messages waiting in queue */
+};
+
+struct audit_tty_status {
+	__u32		enabled; /* 1 = enabled, 0 = disabled */
+};
+
+/* audit_rule_data supports filter rules with both integer and string
+ * fields.  It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
+ * AUDIT_LIST_RULES requests.
+ */
+struct audit_rule_data {
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+	__u32		fieldflags[AUDIT_MAX_FIELDS];
+	__u32		buflen;	/* total length of string fields */
+	char		buf[0];	/* string fields buffer */
+};
+
+/* audit_rule is supported to maintain backward compatibility with
+ * userspace.  It supports integer fields only and corresponds to
+ * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
+ */
+struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE];
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+};
+
+#endif /* _UAPI_LINUX_AUDIT_H_ */
diff --git a/include/uapi/linux/auto_fs.h b/include/uapi/linux/auto_fs.h
new file mode 100644
index 0000000000000000000000000000000000000000..77cdba9df274c09f2d9e8972fca63da215d1a8d9
--- /dev/null
+++ b/include/uapi/linux/auto_fs.h
@@ -0,0 +1,83 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *   
+ * linux/include/linux/auto_fs.h
+ *
+ *   Copyright 1997 Transmeta Corporation - All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+
+#ifndef _UAPI_LINUX_AUTO_FS_H
+#define _UAPI_LINUX_AUTO_FS_H
+
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <sys/ioctl.h>
+#endif /* __KERNEL__ */
+
+
+/* This file describes autofs v3 */
+#define AUTOFS_PROTO_VERSION	3
+
+/* Range of protocol versions defined */
+#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
+#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
+
+/*
+ * Architectures where both 32- and 64-bit binaries can be executed
+ * on 64-bit kernels need this.  This keeps the structure format
+ * uniform, and makes sure the wait_queue_token isn't too big to be
+ * passed back down to the kernel.
+ *
+ * This assumes that on these architectures:
+ * mode     32 bit    64 bit
+ * -------------------------
+ * int      32 bit    32 bit
+ * long     32 bit    64 bit
+ *
+ * If so, 32-bit user-space code should be backwards compatible.
+ */
+
+#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
+ || defined(__powerpc__) || defined(__s390__)
+typedef unsigned int autofs_wqt_t;
+#else
+typedef unsigned long autofs_wqt_t;
+#endif
+
+/* Packet types */
+#define autofs_ptype_missing	0	/* Missing entry (mount request) */
+#define autofs_ptype_expire	1	/* Expire entry (umount request) */
+
+struct autofs_packet_hdr {
+	int proto_version;		/* Protocol version */
+	int type;			/* Type of packet */
+};
+
+struct autofs_packet_missing {
+	struct autofs_packet_hdr hdr;
+        autofs_wqt_t wait_queue_token;
+	int len;
+	char name[NAME_MAX+1];
+};	
+
+/* v3 expire (via ioctl) */
+struct autofs_packet_expire {
+	struct autofs_packet_hdr hdr;
+	int len;
+	char name[NAME_MAX+1];
+};
+
+#define AUTOFS_IOC_READY      _IO(0x93,0x60)
+#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
+#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
+#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
+#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
+#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
+#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
+
+#endif /* _UAPI_LINUX_AUTO_FS_H */
diff --git a/include/linux/auto_fs4.h b/include/uapi/linux/auto_fs4.h
similarity index 100%
rename from include/linux/auto_fs4.h
rename to include/uapi/linux/auto_fs4.h
diff --git a/include/uapi/linux/auxvec.h b/include/uapi/linux/auxvec.h
new file mode 100644
index 0000000000000000000000000000000000000000..61594d598e7b5ea62c0d82e8a0caa18c6d60c2c9
--- /dev/null
+++ b/include/uapi/linux/auxvec.h
@@ -0,0 +1,35 @@
+#ifndef _UAPI_LINUX_AUXVEC_H
+#define _UAPI_LINUX_AUXVEC_H
+
+#include <asm/auxvec.h>
+
+/* Symbolic values for the entries in the auxiliary table
+   put on the initial stack */
+#define AT_NULL   0	/* end of vector */
+#define AT_IGNORE 1	/* entry should be ignored */
+#define AT_EXECFD 2	/* file descriptor of program */
+#define AT_PHDR   3	/* program headers for program */
+#define AT_PHENT  4	/* size of program header entry */
+#define AT_PHNUM  5	/* number of program headers */
+#define AT_PAGESZ 6	/* system page size */
+#define AT_BASE   7	/* base address of interpreter */
+#define AT_FLAGS  8	/* flags */
+#define AT_ENTRY  9	/* entry point of program */
+#define AT_NOTELF 10	/* program is not ELF */
+#define AT_UID    11	/* real uid */
+#define AT_EUID   12	/* effective uid */
+#define AT_GID    13	/* real gid */
+#define AT_EGID   14	/* effective gid */
+#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
+#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
+#define AT_CLKTCK 17	/* frequency at which times() increments */
+/* AT_* values 18 through 22 are reserved */
+#define AT_SECURE 23   /* secure mode boolean */
+#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
+				 * differ from AT_PLATFORM. */
+#define AT_RANDOM 25	/* address of 16 random bytes */
+
+#define AT_EXECFN  31	/* filename of program */
+
+
+#endif /* _UAPI_LINUX_AUXVEC_H */
diff --git a/include/linux/ax25.h b/include/uapi/linux/ax25.h
similarity index 100%
rename from include/linux/ax25.h
rename to include/uapi/linux/ax25.h
diff --git a/include/linux/b1lli.h b/include/uapi/linux/b1lli.h
similarity index 100%
rename from include/linux/b1lli.h
rename to include/uapi/linux/b1lli.h
diff --git a/include/linux/baycom.h b/include/uapi/linux/baycom.h
similarity index 100%
rename from include/linux/baycom.h
rename to include/uapi/linux/baycom.h
diff --git a/include/linux/bfs_fs.h b/include/uapi/linux/bfs_fs.h
similarity index 100%
rename from include/linux/bfs_fs.h
rename to include/uapi/linux/bfs_fs.h
diff --git a/include/uapi/linux/binfmts.h b/include/uapi/linux/binfmts.h
new file mode 100644
index 0000000000000000000000000000000000000000..4eb5972867c0a0f477026d59d30eaf10d4eb271c
--- /dev/null
+++ b/include/uapi/linux/binfmts.h
@@ -0,0 +1,20 @@
+#ifndef _UAPI_LINUX_BINFMTS_H
+#define _UAPI_LINUX_BINFMTS_H
+
+#include <linux/capability.h>
+
+struct pt_regs;
+
+/*
+ * These are the maximum length and maximum number of strings passed to the
+ * execve() system call.  MAX_ARG_STRLEN is essentially random but serves to
+ * prevent the kernel from being unduly impacted by misaddressed pointers.
+ * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
+ */
+#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
+#define MAX_ARG_STRINGS 0x7FFFFFFF
+
+/* sizeof(linux_binprm->buf) */
+#define BINPRM_BUF_SIZE 128
+
+#endif /* _UAPI_LINUX_BINFMTS_H */
diff --git a/include/linux/blkpg.h b/include/uapi/linux/blkpg.h
similarity index 100%
rename from include/linux/blkpg.h
rename to include/uapi/linux/blkpg.h
diff --git a/include/uapi/linux/blktrace_api.h b/include/uapi/linux/blktrace_api.h
new file mode 100644
index 0000000000000000000000000000000000000000..c590ca6bfbd9e05c1e828747859419a731be2730
--- /dev/null
+++ b/include/uapi/linux/blktrace_api.h
@@ -0,0 +1,142 @@
+#ifndef _UAPIBLKTRACE_H
+#define _UAPIBLKTRACE_H
+
+#include <linux/types.h>
+
+/*
+ * Trace categories
+ */
+enum blktrace_cat {
+	BLK_TC_READ	= 1 << 0,	/* reads */
+	BLK_TC_WRITE	= 1 << 1,	/* writes */
+	BLK_TC_FLUSH	= 1 << 2,	/* flush */
+	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
+	BLK_TC_SYNCIO	= BLK_TC_SYNC,
+	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
+	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
+	BLK_TC_ISSUE	= 1 << 6,	/* issue */
+	BLK_TC_COMPLETE	= 1 << 7,	/* completions */
+	BLK_TC_FS	= 1 << 8,	/* fs requests */
+	BLK_TC_PC	= 1 << 9,	/* pc requests */
+	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
+	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
+	BLK_TC_META	= 1 << 12,	/* metadata */
+	BLK_TC_DISCARD	= 1 << 13,	/* discard requests */
+	BLK_TC_DRV_DATA	= 1 << 14,	/* binary per-driver data */
+	BLK_TC_FUA	= 1 << 15,	/* fua requests */
+
+	BLK_TC_END	= 1 << 15,	/* we've run out of bits! */
+};
+
+#define BLK_TC_SHIFT		(16)
+#define BLK_TC_ACT(act)		((act) << BLK_TC_SHIFT)
+
+/*
+ * Basic trace actions
+ */
+enum blktrace_act {
+	__BLK_TA_QUEUE = 1,		/* queued */
+	__BLK_TA_BACKMERGE,		/* back merged to existing rq */
+	__BLK_TA_FRONTMERGE,		/* front merge to existing rq */
+	__BLK_TA_GETRQ,			/* allocated new request */
+	__BLK_TA_SLEEPRQ,		/* sleeping on rq allocation */
+	__BLK_TA_REQUEUE,		/* request requeued */
+	__BLK_TA_ISSUE,			/* sent to driver */
+	__BLK_TA_COMPLETE,		/* completed by driver */
+	__BLK_TA_PLUG,			/* queue was plugged */
+	__BLK_TA_UNPLUG_IO,		/* queue was unplugged by io */
+	__BLK_TA_UNPLUG_TIMER,		/* queue was unplugged by timer */
+	__BLK_TA_INSERT,		/* insert request */
+	__BLK_TA_SPLIT,			/* bio was split */
+	__BLK_TA_BOUNCE,		/* bio was bounced */
+	__BLK_TA_REMAP,			/* bio was remapped */
+	__BLK_TA_ABORT,			/* request aborted */
+	__BLK_TA_DRV_DATA,		/* driver-specific binary data */
+};
+
+/*
+ * Notify events.
+ */
+enum blktrace_notify {
+	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
+	__BLK_TN_TIMESTAMP,		/* include system clock */
+	__BLK_TN_MESSAGE,		/* Character string message */
+};
+
+
+/*
+ * Trace actions in full. Additionally, read or write is masked
+ */
+#define BLK_TA_QUEUE		(__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_BACKMERGE	(__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_FRONTMERGE	(__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_GETRQ		(__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_SLEEPRQ		(__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_REQUEUE		(__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
+#define BLK_TA_ISSUE		(__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
+#define BLK_TA_COMPLETE		(__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
+#define BLK_TA_PLUG		(__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_IO	(__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_TIMER	(__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_INSERT		(__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_SPLIT		(__BLK_TA_SPLIT)
+#define BLK_TA_BOUNCE		(__BLK_TA_BOUNCE)
+#define BLK_TA_REMAP		(__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_ABORT		(__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_DRV_DATA	(__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
+
+#define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
+
+#define BLK_IO_TRACE_MAGIC	0x65617400
+#define BLK_IO_TRACE_VERSION	0x07
+
+/*
+ * The trace itself
+ */
+struct blk_io_trace {
+	__u32 magic;		/* MAGIC << 8 | version */
+	__u32 sequence;		/* event number */
+	__u64 time;		/* in microseconds */
+	__u64 sector;		/* disk offset */
+	__u32 bytes;		/* transfer length */
+	__u32 action;		/* what happened */
+	__u32 pid;		/* who did it */
+	__u32 device;		/* device number */
+	__u32 cpu;		/* on what cpu did it happen */
+	__u16 error;		/* completion error */
+	__u16 pdu_len;		/* length of data after this trace */
+};
+
+/*
+ * The remap event
+ */
+struct blk_io_trace_remap {
+	__be32 device_from;
+	__be32 device_to;
+	__be64 sector_from;
+};
+
+enum {
+	Blktrace_setup = 1,
+	Blktrace_running,
+	Blktrace_stopped,
+};
+
+#define BLKTRACE_BDEV_SIZE	32
+
+/*
+ * User setup structure passed with BLKTRACESTART
+ */
+struct blk_user_trace_setup {
+	char name[BLKTRACE_BDEV_SIZE];	/* output */
+	__u16 act_mask;			/* input */
+	__u32 buf_size;			/* input */
+	__u32 buf_nr;			/* input */
+	__u64 start_lba;
+	__u64 end_lba;
+	__u32 pid;
+};
+
+#endif /* _UAPIBLKTRACE_H */
diff --git a/include/linux/bpqether.h b/include/uapi/linux/bpqether.h
similarity index 100%
rename from include/linux/bpqether.h
rename to include/uapi/linux/bpqether.h
diff --git a/include/uapi/linux/bsg.h b/include/uapi/linux/bsg.h
new file mode 100644
index 0000000000000000000000000000000000000000..7a12e1c0f371d0ce9ede8cc524b40851f2c8b30f
--- /dev/null
+++ b/include/uapi/linux/bsg.h
@@ -0,0 +1,65 @@
+#ifndef _UAPIBSG_H
+#define _UAPIBSG_H
+
+#include <linux/types.h>
+
+#define BSG_PROTOCOL_SCSI		0
+
+#define BSG_SUB_PROTOCOL_SCSI_CMD	0
+#define BSG_SUB_PROTOCOL_SCSI_TMF	1
+#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
+
+/*
+ * For flags member below
+ * sg.h sg_io_hdr also has bits defined for it's flags member. However
+ * none of these bits are implemented/used by bsg. The bits below are
+ * allocated to not conflict with sg.h ones anyway.
+ */
+#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
+
+struct sg_io_v4 {
+	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
+	__u32 protocol;		/* [i] 0 -> SCSI , .... */
+	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
+				   management function, .... */
+
+	__u32 request_len;	/* [i] in bytes */
+	__u64 request;		/* [i], [*i] {SCSI: cdb} */
+	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
+	__u32 request_attr;	/* [i] {SCSI: task attribute} */
+	__u32 request_priority;	/* [i] {SCSI: task priority} */
+	__u32 request_extra;	/* [i] {spare, for padding} */
+	__u32 max_response_len;	/* [i] in bytes */
+	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */
+
+        /* "dout_": data out (to device); "din_": data in (from device) */
+	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
+				   dout_xfer points to array of iovec */
+	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
+	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
+	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
+	__u64 dout_xferp;	/* [i], [*i] */
+	__u64 din_xferp;	/* [i], [*o] */
+
+	__u32 timeout;		/* [i] units: millisecond */
+	__u32 flags;		/* [i] bit mask */
+	__u64 usr_ptr;		/* [i->o] unused internally */
+	__u32 spare_in;		/* [i] */
+
+	__u32 driver_status;	/* [o] 0 -> ok */
+	__u32 transport_status;	/* [o] 0 -> ok */
+	__u32 device_status;	/* [o] {SCSI: command completion status} */
+	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
+	__u32 info;		/* [o] additional information */
+	__u32 duration;		/* [o] time to complete, in milliseconds */
+	__u32 response_len;	/* [o] bytes of response actually written */
+	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
+	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
+	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
+	__u32 spare_out;	/* [o] */
+
+	__u32 padding;
+};
+
+
+#endif /* _UAPIBSG_H */
diff --git a/include/uapi/linux/byteorder/Kbuild b/include/uapi/linux/byteorder/Kbuild
index aafaa5aa54d46bb9a93a8137a22344408298223f..619225b9ff2ef8d610f5ac6160d51e93561e1ef2 100644
--- a/include/uapi/linux/byteorder/Kbuild
+++ b/include/uapi/linux/byteorder/Kbuild
@@ -1 +1,3 @@
 # UAPI Header export list
+header-y += big_endian.h
+header-y += little_endian.h
diff --git a/include/uapi/linux/byteorder/big_endian.h b/include/uapi/linux/byteorder/big_endian.h
new file mode 100644
index 0000000000000000000000000000000000000000..672374450095a51b98ed6b68aaa725c923a433db
--- /dev/null
+++ b/include/uapi/linux/byteorder/big_endian.h
@@ -0,0 +1,105 @@
+#ifndef _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H
+#define _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H
+
+#ifndef __BIG_ENDIAN
+#define __BIG_ENDIAN 4321
+#endif
+#ifndef __BIG_ENDIAN_BITFIELD
+#define __BIG_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)(__u32)(x))
+#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
+#define __constant_htons(x) ((__force __be16)(__u16)(x))
+#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
+#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
+#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
+#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
+#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
+#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
+#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)__swab64p(p);
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)__swab32p(p);
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)__swab16p(p);
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)*p;
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)*p;
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)*p;
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return (__force __u16)*p;
+}
+#define __cpu_to_le64s(x) __swab64s((x))
+#define __le64_to_cpus(x) __swab64s((x))
+#define __cpu_to_le32s(x) __swab32s((x))
+#define __le32_to_cpus(x) __swab32s((x))
+#define __cpu_to_le16s(x) __swab16s((x))
+#define __le16_to_cpus(x) __swab16s((x))
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
+
+
+#endif /* _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/uapi/linux/byteorder/little_endian.h b/include/uapi/linux/byteorder/little_endian.h
new file mode 100644
index 0000000000000000000000000000000000000000..d876736a0017de05cf0ed1a8a0bb05c355f4f0ca
--- /dev/null
+++ b/include/uapi/linux/byteorder/little_endian.h
@@ -0,0 +1,105 @@
+#ifndef _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H
+#define _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H
+
+#ifndef __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN 1234
+#endif
+#ifndef __LITTLE_ENDIAN_BITFIELD
+#define __LITTLE_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
+#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
+#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
+#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
+#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
+#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)*p;
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)*p;
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)*p;
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return (__force __u16)*p;
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)__swab64p(p);
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)__swab32p(p);
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)__swab16p(p);
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be64s(x) __swab64s((x))
+#define __be64_to_cpus(x) __swab64s((x))
+#define __cpu_to_be32s(x) __swab32s((x))
+#define __be32_to_cpus(x) __swab32s((x))
+#define __cpu_to_be16s(x) __swab16s((x))
+#define __be16_to_cpus(x) __swab16s((x))
+
+
+#endif /* _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/can.h b/include/uapi/linux/can.h
similarity index 100%
rename from include/linux/can.h
rename to include/uapi/linux/can.h
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
new file mode 100644
index 0000000000000000000000000000000000000000..ba478fa3012e48b769c9846b50808eb27946990f
--- /dev/null
+++ b/include/uapi/linux/capability.h
@@ -0,0 +1,358 @@
+/*
+ * This is <linux/capability.h>
+ *
+ * Andrew G. Morgan <morgan@kernel.org>
+ * Alexander Kjeldaas <astor@guardian.no>
+ * with help from Aleph1, Roland Buresund and Andrew Main.
+ *
+ * See here for the libcap library ("POSIX draft" compliance):
+ *
+ * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
+ */
+
+#ifndef _UAPI_LINUX_CAPABILITY_H
+#define _UAPI_LINUX_CAPABILITY_H
+
+#include <linux/types.h>
+
+struct task_struct;
+
+/* User-level do most of the mapping between kernel and user
+   capabilities based on the version tag given by the kernel. The
+   kernel might be somewhat backwards compatible, but don't bet on
+   it. */
+
+/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
+   a set of three capability sets.  The transposition of 3*the
+   following structure to such a composite is better handled in a user
+   library since the draft standard requires the use of malloc/free
+   etc.. */
+
+#define _LINUX_CAPABILITY_VERSION_1  0x19980330
+#define _LINUX_CAPABILITY_U32S_1     1
+
+#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
+#define _LINUX_CAPABILITY_U32S_2     2
+
+#define _LINUX_CAPABILITY_VERSION_3  0x20080522
+#define _LINUX_CAPABILITY_U32S_3     2
+
+typedef struct __user_cap_header_struct {
+	__u32 version;
+	int pid;
+} __user *cap_user_header_t;
+
+typedef struct __user_cap_data_struct {
+        __u32 effective;
+        __u32 permitted;
+        __u32 inheritable;
+} __user *cap_user_data_t;
+
+
+#define VFS_CAP_REVISION_MASK	0xFF000000
+#define VFS_CAP_REVISION_SHIFT	24
+#define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
+#define VFS_CAP_FLAGS_EFFECTIVE	0x000001
+
+#define VFS_CAP_REVISION_1	0x01000000
+#define VFS_CAP_U32_1           1
+#define XATTR_CAPS_SZ_1         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
+
+#define VFS_CAP_REVISION_2	0x02000000
+#define VFS_CAP_U32_2           2
+#define XATTR_CAPS_SZ_2         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
+
+#define XATTR_CAPS_SZ           XATTR_CAPS_SZ_2
+#define VFS_CAP_U32             VFS_CAP_U32_2
+#define VFS_CAP_REVISION	VFS_CAP_REVISION_2
+
+struct vfs_cap_data {
+	__le32 magic_etc;            /* Little endian */
+	struct {
+		__le32 permitted;    /* Little endian */
+		__le32 inheritable;  /* Little endian */
+	} data[VFS_CAP_U32];
+};
+
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
+
+#endif
+
+
+/**
+ ** POSIX-draft defined capabilities.
+ **/
+
+/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
+   overrides the restriction of changing file ownership and group
+   ownership. */
+
+#define CAP_CHOWN            0
+
+/* Override all DAC access, including ACL execute access if
+   [_POSIX_ACL] is defined. Excluding DAC access covered by
+   CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_OVERRIDE     1
+
+/* Overrides all DAC restrictions regarding read and search on files
+   and directories, including ACL restrictions if [_POSIX_ACL] is
+   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_READ_SEARCH  2
+
+/* Overrides all restrictions about allowed operations on files, where
+   file owner ID must be equal to the user ID, except where CAP_FSETID
+   is applicable. It doesn't override MAC and DAC restrictions. */
+
+#define CAP_FOWNER           3
+
+/* Overrides the following restrictions that the effective user ID
+   shall match the file owner ID when setting the S_ISUID and S_ISGID
+   bits on that file; that the effective group ID (or one of the
+   supplementary group IDs) shall match the file owner ID when setting
+   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
+   cleared on successful return from chown(2) (not implemented). */
+
+#define CAP_FSETID           4
+
+/* Overrides the restriction that the real or effective user ID of a
+   process sending a signal must match the real or effective user ID
+   of the process receiving the signal. */
+
+#define CAP_KILL             5
+
+/* Allows setgid(2) manipulation */
+/* Allows setgroups(2) */
+/* Allows forged gids on socket credentials passing. */
+
+#define CAP_SETGID           6
+
+/* Allows set*uid(2) manipulation (including fsuid). */
+/* Allows forged pids on socket credentials passing. */
+
+#define CAP_SETUID           7
+
+
+/**
+ ** Linux-specific capabilities
+ **/
+
+/* Without VFS support for capabilities:
+ *   Transfer any capability in your permitted set to any pid,
+ *   remove any capability in your permitted set from any pid
+ * With VFS support for capabilities (neither of above, but)
+ *   Add any capability from current's capability bounding set
+ *       to the current process' inheritable set
+ *   Allow taking bits out of capability bounding set
+ *   Allow modification of the securebits for a process
+ */
+
+#define CAP_SETPCAP          8
+
+/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
+
+#define CAP_LINUX_IMMUTABLE  9
+
+/* Allows binding to TCP/UDP sockets below 1024 */
+/* Allows binding to ATM VCIs below 32 */
+
+#define CAP_NET_BIND_SERVICE 10
+
+/* Allow broadcasting, listen to multicast */
+
+#define CAP_NET_BROADCAST    11
+
+/* Allow interface configuration */
+/* Allow administration of IP firewall, masquerading and accounting */
+/* Allow setting debug option on sockets */
+/* Allow modification of routing tables */
+/* Allow setting arbitrary process / process group ownership on
+   sockets */
+/* Allow binding to any address for transparent proxying (also via NET_RAW) */
+/* Allow setting TOS (type of service) */
+/* Allow setting promiscuous mode */
+/* Allow clearing driver statistics */
+/* Allow multicasting */
+/* Allow read/write of device-specific registers */
+/* Allow activation of ATM control sockets */
+
+#define CAP_NET_ADMIN        12
+
+/* Allow use of RAW sockets */
+/* Allow use of PACKET sockets */
+/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
+
+#define CAP_NET_RAW          13
+
+/* Allow locking of shared memory segments */
+/* Allow mlock and mlockall (which doesn't really have anything to do
+   with IPC) */
+
+#define CAP_IPC_LOCK         14
+
+/* Override IPC ownership checks */
+
+#define CAP_IPC_OWNER        15
+
+/* Insert and remove kernel modules - modify kernel without limit */
+#define CAP_SYS_MODULE       16
+
+/* Allow ioperm/iopl access */
+/* Allow sending USB messages to any device via /proc/bus/usb */
+
+#define CAP_SYS_RAWIO        17
+
+/* Allow use of chroot() */
+
+#define CAP_SYS_CHROOT       18
+
+/* Allow ptrace() of any process */
+
+#define CAP_SYS_PTRACE       19
+
+/* Allow configuration of process accounting */
+
+#define CAP_SYS_PACCT        20
+
+/* Allow configuration of the secure attention key */
+/* Allow administration of the random device */
+/* Allow examination and configuration of disk quotas */
+/* Allow setting the domainname */
+/* Allow setting the hostname */
+/* Allow calling bdflush() */
+/* Allow mount() and umount(), setting up new smb connection */
+/* Allow some autofs root ioctls */
+/* Allow nfsservctl */
+/* Allow VM86_REQUEST_IRQ */
+/* Allow to read/write pci config on alpha */
+/* Allow irix_prctl on mips (setstacksize) */
+/* Allow flushing all cache on m68k (sys_cacheflush) */
+/* Allow removing semaphores */
+/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
+   and shared memory */
+/* Allow locking/unlocking of shared memory segment */
+/* Allow turning swap on/off */
+/* Allow forged pids on socket credentials passing */
+/* Allow setting readahead and flushing buffers on block devices */
+/* Allow setting geometry in floppy driver */
+/* Allow turning DMA on/off in xd driver */
+/* Allow administration of md devices (mostly the above, but some
+   extra ioctls) */
+/* Allow tuning the ide driver */
+/* Allow access to the nvram device */
+/* Allow administration of apm_bios, serial and bttv (TV) device */
+/* Allow manufacturer commands in isdn CAPI support driver */
+/* Allow reading non-standardized portions of pci configuration space */
+/* Allow DDI debug ioctl on sbpcd driver */
+/* Allow setting up serial ports */
+/* Allow sending raw qic-117 commands */
+/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
+   arbitrary SCSI commands */
+/* Allow setting encryption key on loopback filesystem */
+/* Allow setting zone reclaim policy */
+
+#define CAP_SYS_ADMIN        21
+
+/* Allow use of reboot() */
+
+#define CAP_SYS_BOOT         22
+
+/* Allow raising priority and setting priority on other (different
+   UID) processes */
+/* Allow use of FIFO and round-robin (realtime) scheduling on own
+   processes and setting the scheduling algorithm used by another
+   process. */
+/* Allow setting cpu affinity on other processes */
+
+#define CAP_SYS_NICE         23
+
+/* Override resource limits. Set resource limits. */
+/* Override quota limits. */
+/* Override reserved space on ext2 filesystem */
+/* Modify data journaling mode on ext3 filesystem (uses journaling
+   resources) */
+/* NOTE: ext2 honors fsuid when checking for resource overrides, so
+   you can override using fsuid too */
+/* Override size restrictions on IPC message queues */
+/* Allow more than 64hz interrupts from the real-time clock */
+/* Override max number of consoles on console allocation */
+/* Override max number of keymaps */
+
+#define CAP_SYS_RESOURCE     24
+
+/* Allow manipulation of system clock */
+/* Allow irix_stime on mips */
+/* Allow setting the real-time clock */
+
+#define CAP_SYS_TIME         25
+
+/* Allow configuration of tty devices */
+/* Allow vhangup() of tty */
+
+#define CAP_SYS_TTY_CONFIG   26
+
+/* Allow the privileged aspects of mknod() */
+
+#define CAP_MKNOD            27
+
+/* Allow taking of leases on files */
+
+#define CAP_LEASE            28
+
+#define CAP_AUDIT_WRITE      29
+
+#define CAP_AUDIT_CONTROL    30
+
+#define CAP_SETFCAP	     31
+
+/* Override MAC access.
+   The base kernel enforces no MAC policy.
+   An LSM may enforce a MAC policy, and if it does and it chooses
+   to implement capability based overrides of that policy, this is
+   the capability it should use to do so. */
+
+#define CAP_MAC_OVERRIDE     32
+
+/* Allow MAC configuration or state changes.
+   The base kernel requires no MAC configuration.
+   An LSM may enforce a MAC policy, and if it does and it chooses
+   to implement capability based checks on modifications to that
+   policy or the data required to maintain it, this is the
+   capability it should use to do so. */
+
+#define CAP_MAC_ADMIN        33
+
+/* Allow configuring the kernel's syslog (printk behaviour) */
+
+#define CAP_SYSLOG           34
+
+/* Allow triggering something that will wake the system */
+
+#define CAP_WAKE_ALARM            35
+
+/* Allow preventing system suspends */
+
+#define CAP_BLOCK_SUSPEND    36
+
+#define CAP_LAST_CAP         CAP_BLOCK_SUSPEND
+
+#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
+
+/*
+ * Bit location of each capability (used by user-space library and kernel)
+ */
+
+#define CAP_TO_INDEX(x)     ((x) >> 5)        /* 1 << 5 == bits in __u32 */
+#define CAP_TO_MASK(x)      (1 << ((x) & 31)) /* mask for indexed __u32 */
+
+
+#endif /* _UAPI_LINUX_CAPABILITY_H */
diff --git a/include/linux/capi.h b/include/uapi/linux/capi.h
similarity index 100%
rename from include/linux/capi.h
rename to include/uapi/linux/capi.h
diff --git a/include/linux/cciss_defs.h b/include/uapi/linux/cciss_defs.h
similarity index 100%
rename from include/linux/cciss_defs.h
rename to include/uapi/linux/cciss_defs.h
diff --git a/include/uapi/linux/cciss_ioctl.h b/include/uapi/linux/cciss_ioctl.h
new file mode 100644
index 0000000000000000000000000000000000000000..bb0b9ddf7eeb5df30a6e97ba89faf1edaf563e17
--- /dev/null
+++ b/include/uapi/linux/cciss_ioctl.h
@@ -0,0 +1,88 @@
+#ifndef _UAPICCISS_IOCTLH
+#define _UAPICCISS_IOCTLH
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/cciss_defs.h>
+
+#define CCISS_IOC_MAGIC 'B'
+
+
+typedef struct _cciss_pci_info_struct
+{
+	unsigned char 	bus;
+	unsigned char 	dev_fn;
+	unsigned short	domain;
+	__u32 		board_id;
+} cciss_pci_info_struct; 
+
+typedef struct _cciss_coalint_struct
+{
+	__u32  delay;
+	__u32  count;
+} cciss_coalint_struct;
+
+typedef char NodeName_type[16];
+
+typedef __u32 Heartbeat_type;
+
+#define CISS_PARSCSIU2 	0x0001
+#define CISS_PARCSCIU3 	0x0002
+#define CISS_FIBRE1G	0x0100
+#define CISS_FIBRE2G	0x0200
+typedef __u32 BusTypes_type;
+
+typedef char FirmwareVer_type[4];
+typedef __u32 DriverVer_type;
+
+#define MAX_KMALLOC_SIZE 128000
+
+typedef struct _IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info; 
+  WORD			   buf_size;  /* size in bytes of the buf */
+  BYTE			   __user *buf;
+} IOCTL_Command_struct;
+
+typedef struct _BIG_IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
+  DWORD			   buf_size;    /* size in bytes of the buf */
+  				        /* < malloc_size * MAXSGENTRIES */
+  BYTE			   __user *buf;
+} BIG_IOCTL_Command_struct;
+
+typedef struct _LogvolInfo_struct{
+	__u32	LunID;
+	int	num_opens;  /* number of opens on the logical volume */
+	int	num_parts;  /* number of partitions configured on logvol */
+} LogvolInfo_struct;
+
+#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
+
+#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
+#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
+
+#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
+#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
+
+#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
+#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
+#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
+#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
+#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
+#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
+#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
+
+/* no longer used... use REGNEWD instead */ 
+#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
+
+#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
+#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
+#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
+#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
+
+#endif /* _UAPICCISS_IOCTLH */
diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h
new file mode 100644
index 0000000000000000000000000000000000000000..898b866b300cb46084b8f232a0eeb5f3c0b6e9b2
--- /dev/null
+++ b/include/uapi/linux/cdrom.h
@@ -0,0 +1,912 @@
+/*
+ * -- <linux/cdrom.h>
+ * General header file for linux CD-ROM drivers 
+ * Copyright (C) 1992         David Giller, rafetmad@oxy.edu
+ *               1994, 1995   Eberhard Mönkeberg, emoenke@gwdg.de
+ *               1996         David van Leeuwen, david@tm.tno.nl
+ *               1997, 1998   Erik Andersen, andersee@debian.org
+ *               1998-2002    Jens Axboe, axboe@suse.de
+ */
+ 
+#ifndef _UAPI_LINUX_CDROM_H
+#define _UAPI_LINUX_CDROM_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*******************************************************
+ * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
+ * (and only this) include file.  It is my hope to provide Linux with
+ * a uniform interface between software accessing CD-ROMs and the various 
+ * device drivers that actually talk to the drives.  There may still be
+ * 23 different kinds of strange CD-ROM drives, but at least there will 
+ * now be one, and only one, Linux CD-ROM interface.
+ *
+ * Additionally, as of Linux 2.1.x, all Linux application programs 
+ * should use the O_NONBLOCK option when opening a CD-ROM device 
+ * for subsequent ioctl commands.  This allows for neat system errors 
+ * like "No medium found" or "Wrong medium type" upon attempting to 
+ * mount or play an empty slot, mount an audio disc, or play a data disc.
+ * Generally, changing an application program to support O_NONBLOCK
+ * is as easy as the following:
+ *       -    drive = open("/dev/cdrom", O_RDONLY);
+ *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
+ * It is worth the small change.
+ *
+ *  Patches for many common CD programs (provided by David A. van Leeuwen)
+ *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
+ * 
+ *******************************************************/
+
+/* When a driver supports a certain function, but the cdrom drive we are 
+ * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
+ * borrow the "Operation not supported" error from the network folks to 
+ * accomplish this.  Maybe someday we will get a more targeted error code, 
+ * but this will do for now... */
+#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
+
+/*******************************************************
+ * The CD-ROM IOCTL commands  -- these should be supported by 
+ * all the various cdrom drivers.  For the CD-ROM ioctls, we 
+ * will commandeer byte 0x53, or 'S'.
+ *******************************************************/
+#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
+#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
+#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
+#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
+                                           (struct cdrom_ti) */
+#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
+                                           (struct cdrom_tochdr) */
+#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
+                                           (struct cdrom_tocentry) */
+#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
+#define CDROMSTART		0x5308 /* Start the cdrom drive */
+#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
+#define CDROMVOLCTRL		0x530a /* Control output volume 
+                                           (struct cdrom_volctrl) */
+#define CDROMSUBCHNL		0x530b /* Read subchannel data 
+                                           (struct cdrom_subchnl) */
+#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
+                                           (struct cdrom_read) */
+#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
+                                           (struct cdrom_read) */
+#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
+#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
+#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
+                                           address of multi session disks 
+                                           (struct cdrom_multisession) */
+#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
+                                           if available (struct cdrom_mcn) */
+#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is deprecated, 
+                                          but here anyway for compatibility */
+#define CDROMRESET		0x5312 /* hard-reset the drive */
+#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
+                                          (struct cdrom_volctrl) */
+#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
+                                           (struct cdrom_read) */
+/* 
+ * These ioctls are used only used in aztcd.c and optcd.c
+ */
+#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
+#define CDROMSEEK		0x5316  /* seek msf address */
+  
+/*
+ * This ioctl is only used by the scsi-cd driver.  
+   It is for playing audio in logical block addressing mode.
+ */
+#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
+
+/* 
+ * These ioctls are only used in optcd.c
+ */
+#define CDROMREADALL		0x5318	/* read all 2646 bytes */
+
+/* 
+ * These ioctls are (now) only in ide-cd.c for controlling 
+ * drive spindown time.  They should be implemented in the
+ * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
+ * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
+ *  -Erik
+ */
+#define CDROMGETSPINDOWN        0x531d
+#define CDROMSETSPINDOWN        0x531e
+
+/* 
+ * These ioctls are implemented through the uniform CD-ROM driver
+ * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
+ * drivers are eventually ported to the uniform CD-ROM driver interface.
+ */
+#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
+#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
+#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
+#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
+#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
+#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
+#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
+#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
+#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
+#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
+#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
+#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
+
+/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
+ * Future CDROM ioctls should be kept below 0x537F
+ */
+
+/* This ioctl is only used by sbpcd at the moment */
+#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
+					/* conflict with SCSI_IOCTL_GET_IDLUN */
+
+/* DVD-ROM Specific ioctls */
+#define DVD_READ_STRUCT		0x5390  /* Read structure */
+#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
+#define DVD_AUTH		0x5392  /* Authentication */
+
+#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
+#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
+#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
+
+/*******************************************************
+ * CDROM IOCTL structures
+ *******************************************************/
+
+/* Address in MSF format */
+struct cdrom_msf0		
+{
+	__u8	minute;
+	__u8	second;
+	__u8	frame;
+};
+
+/* Address in either MSF or logical format */
+union cdrom_addr		
+{
+	struct cdrom_msf0	msf;
+	int			lba;
+};
+
+/* This struct is used by the CDROMPLAYMSF ioctl */ 
+struct cdrom_msf 
+{
+	__u8	cdmsf_min0;	/* start minute */
+	__u8	cdmsf_sec0;	/* start second */
+	__u8	cdmsf_frame0;	/* start frame */
+	__u8	cdmsf_min1;	/* end minute */
+	__u8	cdmsf_sec1;	/* end second */
+	__u8	cdmsf_frame1;	/* end frame */
+};
+
+/* This struct is used by the CDROMPLAYTRKIND ioctl */
+struct cdrom_ti 
+{
+	__u8	cdti_trk0;	/* start track */
+	__u8	cdti_ind0;	/* start index */
+	__u8	cdti_trk1;	/* end track */
+	__u8	cdti_ind1;	/* end index */
+};
+
+/* This struct is used by the CDROMREADTOCHDR ioctl */
+struct cdrom_tochdr 	
+{
+	__u8	cdth_trk0;	/* start track */
+	__u8	cdth_trk1;	/* end track */
+};
+
+/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
+struct cdrom_volctrl
+{
+	__u8	channel0;
+	__u8	channel1;
+	__u8	channel2;
+	__u8	channel3;
+};
+
+/* This struct is used by the CDROMSUBCHNL ioctl */
+struct cdrom_subchnl 
+{
+	__u8	cdsc_format;
+	__u8	cdsc_audiostatus;
+	__u8	cdsc_adr:	4;
+	__u8	cdsc_ctrl:	4;
+	__u8	cdsc_trk;
+	__u8	cdsc_ind;
+	union cdrom_addr cdsc_absaddr;
+	union cdrom_addr cdsc_reladdr;
+};
+
+
+/* This struct is used by the CDROMREADTOCENTRY ioctl */
+struct cdrom_tocentry 
+{
+	__u8	cdte_track;
+	__u8	cdte_adr	:4;
+	__u8	cdte_ctrl	:4;
+	__u8	cdte_format;
+	union cdrom_addr cdte_addr;
+	__u8	cdte_datamode;
+};
+
+/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
+struct cdrom_read      
+{
+	int	cdread_lba;
+	char 	*cdread_bufaddr;
+	int	cdread_buflen;
+};
+
+/* This struct is used by the CDROMREADAUDIO ioctl */
+struct cdrom_read_audio
+{
+	union cdrom_addr addr; /* frame address */
+	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
+	int nframes;           /* number of 2352-byte-frames to read at once */
+	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
+};
+
+/* This struct is used with the CDROMMULTISESSION ioctl */
+struct cdrom_multisession
+{
+	union cdrom_addr addr; /* frame address: start-of-last-session 
+	                           (not the new "frame 16"!).  Only valid
+	                           if the "xa_flag" is true. */
+	__u8 xa_flag;        /* 1: "is XA disk" */
+	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
+};
+
+/* This struct is used with the CDROM_GET_MCN ioctl.  
+ * Very few audio discs actually have Universal Product Code information, 
+ * which should just be the Medium Catalog Number on the box.  Also note 
+ * that the way the codeis written on CD is _not_ uniform across all discs!
+ */  
+struct cdrom_mcn 
+{
+  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
+};
+
+/* This is used by the CDROMPLAYBLK ioctl */
+struct cdrom_blk 
+{
+	unsigned from;
+	unsigned short len;
+};
+
+#define CDROM_PACKET_SIZE	12
+
+#define CGC_DATA_UNKNOWN	0
+#define CGC_DATA_WRITE		1
+#define CGC_DATA_READ		2
+#define CGC_DATA_NONE		3
+
+/* for CDROM_PACKET_COMMAND ioctl */
+struct cdrom_generic_command
+{
+	unsigned char 		cmd[CDROM_PACKET_SIZE];
+	unsigned char		__user *buffer;
+	unsigned int 		buflen;
+	int			stat;
+	struct request_sense	__user *sense;
+	unsigned char		data_direction;
+	int			quiet;
+	int			timeout;
+	void			__user *reserved[1];	/* unused, actually */
+};
+
+/*
+ * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
+ * 2340, or 2352 bytes long.  
+
+*         Sector types of the standard CD-ROM data formats:
+ *
+ * format   sector type               user data size (bytes)
+ * -----------------------------------------------------------------------------
+ *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
+ *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
+ *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
+ *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
+ *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
+ *
+ *
+ *       The layout of the standard CD-ROM data formats:
+ * -----------------------------------------------------------------------------
+ * - audio (red):                  | audio_sample_bytes |
+ *                                 |        2352        |
+ *
+ * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
+ *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
+ *
+ * - data (yellow, mode2):         | sync - head - data |
+ *                                 |  12  -   4  - 2336 |
+ *
+ * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
+ *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
+ *
+ * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
+ *                                 |  12  -   4  -  8  - 2324 -  4    |
+ *
+ */
+
+/* Some generally useful CD-ROM information -- mostly based on the above */
+#define CD_MINS              74 /* max. minutes per CD, not really a limit */
+#define CD_SECS              60 /* seconds per minute */
+#define CD_FRAMES            75 /* frames per second */
+#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
+#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
+#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
+#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
+#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
+#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
+#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
+#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
+#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
+#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
+#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
+#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
+#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
+/* most drives don't deliver everything: */
+#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
+#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
+
+#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
+#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
+#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
+
+/* CD-ROM address types (cdrom_tocentry.cdte_format) */
+#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
+#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
+
+/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
+#define	CDROM_DATA_TRACK	0x04
+
+/* The leadout track is always 0xAA, regardless of # of tracks on disc */
+#define	CDROM_LEADOUT		0xAA
+
+/* audio states (from SCSI-2, but seen with other drives, too) */
+#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
+#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
+#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
+#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
+#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
+#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
+
+/* capability flags used with the uniform CD-ROM driver */ 
+#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
+#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
+#define CDC_LOCK		0x4     /* disable manual eject */
+#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
+#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
+#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
+#define CDC_MCN			0x40    /* Medium Catalog Number */
+#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
+#define CDC_PLAY_AUDIO		0x100   /* audio functions */
+#define CDC_RESET               0x200   /* hard reset device */
+#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
+#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
+#define CDC_CD_R		0x2000	/* drive is a CD-R */
+#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
+#define CDC_DVD			0x8000	/* drive is a DVD */
+#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
+#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
+#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
+#define CDC_MRW			0x80000 /* drive can read MRW */
+#define CDC_MRW_W		0x100000 /* drive can write MRW */
+#define CDC_RAM			0x200000 /* ok to open for WRITE */
+
+/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
+#define CDS_NO_INFO		0	/* if not implemented */
+#define CDS_NO_DISC		1
+#define CDS_TRAY_OPEN		2
+#define CDS_DRIVE_NOT_READY	3
+#define CDS_DISC_OK		4
+
+/* return values for the CDROM_DISC_STATUS ioctl */
+/* can also return CDS_NO_[INFO|DISC], from above */
+#define CDS_AUDIO		100
+#define CDS_DATA_1		101
+#define CDS_DATA_2		102
+#define CDS_XA_2_1		103
+#define CDS_XA_2_2		104
+#define CDS_MIXED		105
+
+/* User-configurable behavior options for the uniform CD-ROM driver */
+#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
+#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
+#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
+#define CDO_LOCK		0x8     /* lock tray on open files */
+#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
+
+/* Special codes used when specifying changer slots. */
+#define CDSL_NONE       	(INT_MAX-1)
+#define CDSL_CURRENT    	INT_MAX
+
+/* For partition based multisession access. IDE can handle 64 partitions
+ * per drive - SCSI CD-ROM's use minors to differentiate between the
+ * various drives, so we can't do multisessions the same way there.
+ * Use the -o session=x option to mount on them.
+ */
+#define CD_PART_MAX		64
+#define CD_PART_MASK		(CD_PART_MAX - 1)
+
+/*********************************************************************
+ * Generic Packet commands, MMC commands, and such
+ *********************************************************************/
+
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK			    0xa1
+#define GPCMD_CLOSE_TRACK		    0x5b
+#define GPCMD_FLUSH_CACHE		    0x35
+#define GPCMD_FORMAT_UNIT		    0x04
+#define GPCMD_GET_CONFIGURATION		    0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE		    0xac
+#define GPCMD_INQUIRY			    0x12
+#define GPCMD_LOAD_UNLOAD		    0xa6
+#define GPCMD_MECHANISM_STATUS		    0xbd
+#define GPCMD_MODE_SELECT_10		    0x55
+#define GPCMD_MODE_SENSE_10		    0x5a
+#define GPCMD_PAUSE_RESUME		    0x4b
+#define GPCMD_PLAY_AUDIO_10		    0x45
+#define GPCMD_PLAY_AUDIO_MSF		    0x47
+#define GPCMD_PLAY_AUDIO_TI		    0x48
+#define GPCMD_PLAY_CD			    0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
+#define GPCMD_READ_10			    0x28
+#define GPCMD_READ_12			    0xa8
+#define GPCMD_READ_BUFFER		    0x3c
+#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
+#define GPCMD_READ_CDVD_CAPACITY	    0x25
+#define GPCMD_READ_CD			    0xbe
+#define GPCMD_READ_CD_MSF		    0xb9
+#define GPCMD_READ_DISC_INFO		    0x51
+#define GPCMD_READ_DVD_STRUCTURE	    0xad
+#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
+#define GPCMD_READ_HEADER		    0x44
+#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
+#define GPCMD_READ_SUBCHANNEL		    0x42
+#define GPCMD_READ_TOC_PMA_ATIP		    0x43
+#define GPCMD_REPAIR_RZONE_TRACK	    0x58
+#define GPCMD_REPORT_KEY		    0xa4
+#define GPCMD_REQUEST_SENSE		    0x03
+#define GPCMD_RESERVE_RZONE_TRACK	    0x53
+#define GPCMD_SEND_CUE_SHEET		    0x5d
+#define GPCMD_SCAN			    0xba
+#define GPCMD_SEEK			    0x2b
+#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
+#define GPCMD_SEND_EVENT		    0xa2
+#define GPCMD_SEND_KEY			    0xa3
+#define GPCMD_SEND_OPC			    0x54
+#define GPCMD_SET_READ_AHEAD		    0xa7
+#define GPCMD_SET_STREAMING		    0xb6
+#define GPCMD_START_STOP_UNIT		    0x1b
+#define GPCMD_STOP_PLAY_SCAN		    0x4e
+#define GPCMD_TEST_UNIT_READY		    0x00
+#define GPCMD_VERIFY_10			    0x2f
+#define GPCMD_WRITE_10			    0x2a
+#define GPCMD_WRITE_12			    0xaa
+#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
+#define GPCMD_WRITE_BUFFER		    0x3b
+/* This is listed as optional in ATAPI 2.6, but is (curiously) 
+ * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED			    0xbb
+/* This seems to be a SCSI specific CD-ROM opcode 
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI		    0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS		    0xda
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_VENDOR_PAGE		0x00
+#define GPMODE_R_W_ERROR_PAGE		0x01
+#define GPMODE_WRITE_PARMS_PAGE		0x05
+#define GPMODE_WCACHING_PAGE		0x08
+#define GPMODE_AUDIO_CTL_PAGE		0x0e
+#define GPMODE_POWER_PAGE		0x1a
+#define GPMODE_FAULT_FAIL_PAGE		0x1c
+#define GPMODE_TO_PROTECT_PAGE		0x1d
+#define GPMODE_CAPABILITIES_PAGE	0x2a
+#define GPMODE_ALL_PAGES		0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE		0x0d
+
+
+
+/* DVD struct types */
+#define DVD_STRUCT_PHYSICAL	0x00
+#define DVD_STRUCT_COPYRIGHT	0x01
+#define DVD_STRUCT_DISCKEY	0x02
+#define DVD_STRUCT_BCA		0x03
+#define DVD_STRUCT_MANUFACT	0x04
+
+struct dvd_layer {
+	__u8 book_version	: 4;
+	__u8 book_type		: 4;
+	__u8 min_rate		: 4;
+	__u8 disc_size		: 4;
+	__u8 layer_type		: 4;
+	__u8 track_path		: 1;
+	__u8 nlayers		: 2;
+	__u8 track_density	: 4;
+	__u8 linear_density	: 4;
+	__u8 bca		: 1;
+	__u32 start_sector;
+	__u32 end_sector;
+	__u32 end_sector_l0;
+};
+
+#define DVD_LAYERS	4
+
+struct dvd_physical {
+	__u8 type;
+	__u8 layer_num;
+	struct dvd_layer layer[DVD_LAYERS];
+};
+
+struct dvd_copyright {
+	__u8 type;
+
+	__u8 layer_num;
+	__u8 cpst;
+	__u8 rmi;
+};
+
+struct dvd_disckey {
+	__u8 type;
+
+	unsigned agid		: 2;
+	__u8 value[2048];
+};
+
+struct dvd_bca {
+	__u8 type;
+
+	int len;
+	__u8 value[188];
+};
+
+struct dvd_manufact {
+	__u8 type;
+
+	__u8 layer_num;
+	int len;
+	__u8 value[2048];
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_physical	physical;
+	struct dvd_copyright	copyright;
+	struct dvd_disckey	disckey;
+	struct dvd_bca		bca;
+	struct dvd_manufact	manufact;
+} dvd_struct;
+
+/*
+ * DVD authentication ioctl
+ */
+
+/* Authentication states */
+#define DVD_LU_SEND_AGID	0
+#define DVD_HOST_SEND_CHALLENGE	1
+#define DVD_LU_SEND_KEY1	2
+#define DVD_LU_SEND_CHALLENGE	3
+#define DVD_HOST_SEND_KEY2	4
+
+/* Termination states */
+#define DVD_AUTH_ESTABLISHED	5
+#define DVD_AUTH_FAILURE	6
+
+/* Other functions */
+#define DVD_LU_SEND_TITLE_KEY	7
+#define DVD_LU_SEND_ASF		8
+#define DVD_INVALIDATE_AGID	9
+#define DVD_LU_SEND_RPC_STATE	10
+#define DVD_HOST_SEND_RPC_STATE	11
+
+/* State data */
+typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
+typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
+
+struct dvd_lu_send_agid {
+	__u8 type;
+	unsigned agid		: 2;
+};
+
+struct dvd_host_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+struct dvd_send_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key key;
+};
+
+struct dvd_lu_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+#define DVD_CPM_NO_COPYRIGHT	0
+#define DVD_CPM_COPYRIGHTED	1
+
+#define DVD_CP_SEC_NONE		0
+#define DVD_CP_SEC_EXIST	1
+
+#define DVD_CGMS_UNRESTRICTED	0
+#define DVD_CGMS_SINGLE		2
+#define DVD_CGMS_RESTRICTED	3
+
+struct dvd_lu_send_title_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key title_key;
+	int lba;
+	unsigned cpm		: 1;
+	unsigned cp_sec		: 1;
+	unsigned cgms		: 2;
+};
+
+struct dvd_lu_send_asf {
+	__u8 type;
+	unsigned agid		: 2;
+
+	unsigned asf		: 1;
+};
+
+struct dvd_host_send_rpcstate {
+	__u8 type;
+	__u8 pdrc;
+};
+
+struct dvd_lu_send_rpcstate {
+	__u8 type		: 2;
+	__u8 vra		: 3;
+	__u8 ucca		: 3;
+	__u8 region_mask;
+	__u8 rpc_scheme;
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_lu_send_agid		lsa;
+	struct dvd_host_send_challenge	hsc;
+	struct dvd_send_key		lsk;
+	struct dvd_lu_send_challenge	lsc;
+	struct dvd_send_key		hsk;
+	struct dvd_lu_send_title_key	lstk;
+	struct dvd_lu_send_asf		lsasf;
+	struct dvd_host_send_rpcstate	hrpcs;
+	struct dvd_lu_send_rpcstate	lrpcs;
+} dvd_authinfo;
+
+struct request_sense {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 valid		: 1;
+	__u8 error_code		: 7;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 error_code		: 7;
+	__u8 valid		: 1;
+#endif
+	__u8 segment_number;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 ili		: 1;
+	__u8 reserved2		: 1;
+	__u8 sense_key		: 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 sense_key		: 4;
+	__u8 reserved2		: 1;
+	__u8 ili		: 1;
+	__u8 reserved1		: 2;
+#endif
+	__u8 information[4];
+	__u8 add_sense_len;
+	__u8 command_info[4];
+	__u8 asc;
+	__u8 ascq;
+	__u8 fruc;
+	__u8 sks[3];
+	__u8 asb[46];
+};
+
+/*
+ * feature profile
+ */
+#define CDF_RWRT	0x0020	/* "Random Writable" */
+#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
+#define CDF_MRW 	0x0028
+
+/*
+ * media status bits
+ */
+#define CDM_MRW_NOTMRW			0
+#define CDM_MRW_BGFORMAT_INACTIVE	1
+#define CDM_MRW_BGFORMAT_ACTIVE		2
+#define CDM_MRW_BGFORMAT_COMPLETE	3
+
+/*
+ * mrw address spaces
+ */
+#define MRW_LBA_DMA			0
+#define MRW_LBA_GAA			1
+
+/*
+ * mrw mode pages (first is deprecated) -- probed at init time and
+ * cdi->mrw_mode_page is set
+ */
+#define MRW_MODE_PC_PRE1		0x2c
+#define MRW_MODE_PC			0x03
+
+struct mrw_feature_desc {
+	__be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 write		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 write		: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+	__u8 reserved4;
+	__u8 reserved5;
+};
+
+/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
+struct rwrt_feature_desc {
+	__be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+	__u32 last_lba;
+	__u32 block_size;
+	__u16 blocking;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 page_present	: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 page_present	: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+};
+
+typedef struct {
+	__be16 disc_information_length;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1			: 3;
+        __u8 erasable			: 1;
+        __u8 border_status		: 2;
+        __u8 disc_status		: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 disc_status		: 2;
+        __u8 border_status		: 2;
+        __u8 erasable			: 1;
+	__u8 reserved1			: 3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 n_first_track;
+	__u8 n_sessions_lsb;
+	__u8 first_track_lsb;
+	__u8 last_track_lsb;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 did_v			: 1;
+        __u8 dbc_v			: 1;
+        __u8 uru			: 1;
+        __u8 reserved2			: 2;
+	__u8 dbit			: 1;
+	__u8 mrw_status			: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 mrw_status			: 2;
+	__u8 dbit			: 1;
+        __u8 reserved2			: 2;
+        __u8 uru			: 1;
+        __u8 dbc_v			: 1;
+	__u8 did_v			: 1;
+#endif
+	__u8 disc_type;
+	__u8 n_sessions_msb;
+	__u8 first_track_msb;
+	__u8 last_track_msb;
+	__u32 disc_id;
+	__u32 lead_in;
+	__u32 lead_out;
+	__u8 disc_bar_code[8];
+	__u8 reserved3;
+	__u8 n_opc;
+} disc_information;
+
+typedef struct {
+	__be16 track_information_length;
+	__u8 track_lsb;
+	__u8 session_lsb;
+	__u8 reserved1;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2			: 2;
+        __u8 damage			: 1;
+        __u8 copy			: 1;
+        __u8 track_mode			: 4;
+	__u8 rt				: 1;
+	__u8 blank			: 1;
+	__u8 packet			: 1;
+	__u8 fp				: 1;
+	__u8 data_mode			: 4;
+	__u8 reserved3			: 6;
+	__u8 lra_v			: 1;
+	__u8 nwa_v			: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 track_mode			: 4;
+        __u8 copy			: 1;
+        __u8 damage			: 1;
+	__u8 reserved2			: 2;
+	__u8 data_mode			: 4;
+	__u8 fp				: 1;
+	__u8 packet			: 1;
+	__u8 blank			: 1;
+	__u8 rt				: 1;
+	__u8 nwa_v			: 1;
+	__u8 lra_v			: 1;
+	__u8 reserved3			: 6;
+#endif
+	__be32 track_start;
+	__be32 next_writable;
+	__be32 free_blocks;
+	__be32 fixed_packet_size;
+	__be32 track_size;
+	__be32 last_rec_address;
+} track_information;
+
+struct feature_header {
+	__u32 data_len;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u16 curr_profile;
+};
+
+struct mode_page_header {
+	__be16 mode_data_length;
+	__u8 medium_type;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u8 reserved3;
+	__be16 desc_length;
+};
+
+
+#endif /* _UAPI_LINUX_CDROM_H */
diff --git a/include/linux/cgroupstats.h b/include/uapi/linux/cgroupstats.h
similarity index 100%
rename from include/linux/cgroupstats.h
rename to include/uapi/linux/cgroupstats.h
diff --git a/include/linux/chio.h b/include/uapi/linux/chio.h
similarity index 100%
rename from include/linux/chio.h
rename to include/uapi/linux/chio.h
diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h
new file mode 100644
index 0000000000000000000000000000000000000000..bc51f77db91897aec85574718e35db54ed4ebc0b
--- /dev/null
+++ b/include/uapi/linux/cm4000_cs.h
@@ -0,0 +1,62 @@
+#ifndef _UAPI_CM4000_H_
+#define _UAPI_CM4000_H_
+
+#include <linux/types.h>
+
+#define	MAX_ATR			33
+
+#define	CM4000_MAX_DEV		4
+
+/* those two structures are passed via ioctl() from/to userspace.  They are
+ * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
+ * not to break compilation of userspace apps. -HW */
+
+typedef struct atreq {
+	__s32 atr_len;
+	unsigned char atr[64];
+	__s32 power_act;
+	unsigned char bIFSD;
+	unsigned char bIFSC;
+} atreq_t;
+
+
+/* what is particularly stupid in the original driver is the arch-dependent
+ * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
+ * will lay out the structure members differently than the 64bit kernel.
+ *
+ * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
+ * On 32bit this will make no difference.  With 64bit kernels, it will make
+ * 32bit apps work, too.
+ */
+
+typedef struct ptsreq {
+	__u32 protocol; /*T=0: 2^0, T=1:  2^1*/
+ 	unsigned char flags;
+ 	unsigned char pts1;
+ 	unsigned char pts2;
+	unsigned char pts3;
+} ptsreq_t;
+
+#define	CM_IOC_MAGIC		'c'
+#define	CM_IOC_MAXNR	        255
+
+#define	CM_IOCGSTATUS		_IOR (CM_IOC_MAGIC, 0, unsigned char *)
+#define	CM_IOCGATR		_IOWR(CM_IOC_MAGIC, 1, atreq_t *)
+#define	CM_IOCSPTS		_IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
+#define	CM_IOCSRDR		_IO  (CM_IOC_MAGIC, 3)
+#define CM_IOCARDOFF            _IO  (CM_IOC_MAGIC, 4)
+
+#define CM_IOSDBGLVL            _IOW(CM_IOC_MAGIC, 250, int*)
+
+/* card and device states */
+#define	CM_CARD_INSERTED		0x01
+#define	CM_CARD_POWERED			0x02
+#define	CM_ATR_PRESENT			0x04
+#define	CM_ATR_VALID	 		0x08
+#define	CM_STATE_VALID			0x0f
+/* extra info only from CM4000 */
+#define	CM_NO_READER			0x10
+#define	CM_BAD_CARD			0x20
+
+
+#endif /* _UAPI_CM4000_H_ */
diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h
new file mode 100644
index 0000000000000000000000000000000000000000..0d7b49973bb35451254d51d2d24645588678af2e
--- /dev/null
+++ b/include/uapi/linux/cn_proc.h
@@ -0,0 +1,121 @@
+/*
+ * cn_proc.h - process events connector
+ *
+ * Copyright (C) Matt Helsley, IBM Corp. 2005
+ * Based on cn_fork.h by Nguyen Anh Quynh and Guillaume Thouvenin
+ * Copyright (C) 2005 Nguyen Anh Quynh <aquynh@gmail.com>
+ * Copyright (C) 2005 Guillaume Thouvenin <guillaume.thouvenin@bull.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _UAPICN_PROC_H
+#define _UAPICN_PROC_H
+
+#include <linux/types.h>
+
+/*
+ * Userspace sends this enum to register with the kernel that it is listening
+ * for events on the connector.
+ */
+enum proc_cn_mcast_op {
+	PROC_CN_MCAST_LISTEN = 1,
+	PROC_CN_MCAST_IGNORE = 2
+};
+
+/*
+ * From the user's point of view, the process
+ * ID is the thread group ID and thread ID is the internal
+ * kernel "pid". So, fields are assigned as follow:
+ *
+ *  In user space     -  In  kernel space
+ *
+ * parent process ID  =  parent->tgid
+ * parent thread  ID  =  parent->pid
+ * child  process ID  =  child->tgid
+ * child  thread  ID  =  child->pid
+ */
+
+struct proc_event {
+	enum what {
+		/* Use successive bits so the enums can be used to record
+		 * sets of events as well
+		 */
+		PROC_EVENT_NONE = 0x00000000,
+		PROC_EVENT_FORK = 0x00000001,
+		PROC_EVENT_EXEC = 0x00000002,
+		PROC_EVENT_UID  = 0x00000004,
+		PROC_EVENT_GID  = 0x00000040,
+		PROC_EVENT_SID  = 0x00000080,
+		PROC_EVENT_PTRACE = 0x00000100,
+		PROC_EVENT_COMM = 0x00000200,
+		/* "next" should be 0x00000400 */
+		/* "last" is the last process event: exit */
+		PROC_EVENT_EXIT = 0x80000000
+	} what;
+	__u32 cpu;
+	__u64 __attribute__((aligned(8))) timestamp_ns;
+		/* Number of nano seconds since system boot */
+	union { /* must be last field of proc_event struct */
+		struct {
+			__u32 err;
+		} ack;
+
+		struct fork_proc_event {
+			__kernel_pid_t parent_pid;
+			__kernel_pid_t parent_tgid;
+			__kernel_pid_t child_pid;
+			__kernel_pid_t child_tgid;
+		} fork;
+
+		struct exec_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} exec;
+
+		struct id_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			union {
+				__u32 ruid; /* task uid */
+				__u32 rgid; /* task gid */
+			} r;
+			union {
+				__u32 euid;
+				__u32 egid;
+			} e;
+		} id;
+
+		struct sid_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} sid;
+
+		struct ptrace_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			__kernel_pid_t tracer_pid;
+			__kernel_pid_t tracer_tgid;
+		} ptrace;
+
+		struct comm_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			char           comm[16];
+		} comm;
+
+		struct exit_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			__u32 exit_code, exit_signal;
+		} exit;
+	} event_data;
+};
+
+#endif /* _UAPICN_PROC_H */
diff --git a/include/uapi/linux/coda.h b/include/uapi/linux/coda.h
new file mode 100644
index 0000000000000000000000000000000000000000..695fade33c64fdae29b32648a786421b2a1a5a1b
--- /dev/null
+++ b/include/uapi/linux/coda.h
@@ -0,0 +1,741 @@
+/* 
+   You may distribute this file under either of the two licenses that
+   follow at your discretion.
+*/
+
+/* BLURB lgpl
+
+                           Coda File System
+                              Release 5
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                  Additional copyrights listed below
+
+This code is distributed "AS IS" without warranty of any kind under
+the terms of the GNU Library General Public Licence Version 2, as
+shown in the file LICENSE, or under the license shown below. The
+technical and financial contributors to Coda are listed in the file
+CREDITS.
+
+                        Additional copyrights 
+*/
+
+/*
+
+            Coda: an Experimental Distributed File System
+                             Release 4.0
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                         All Rights Reserved
+
+Permission  to  use, copy, modify and distribute this software and its
+documentation is hereby granted,  provided  that  both  the  copyright
+notice  and  this  permission  notice  appear  in  all  copies  of the
+software, derivative works or  modified  versions,  and  any  portions
+thereof, and that both notices appear in supporting documentation, and
+that credit is given to Carnegie Mellon University  in  all  documents
+and publicity pertaining to direct or indirect use of this code or its
+derivatives.
+
+CODA IS AN EXPERIMENTAL SOFTWARE SYSTEM AND IS  KNOWN  TO  HAVE  BUGS,
+SOME  OF  WHICH MAY HAVE SERIOUS CONSEQUENCES.  CARNEGIE MELLON ALLOWS
+FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION.   CARNEGIE  MELLON
+DISCLAIMS  ANY  LIABILITY  OF  ANY  KIND  FOR  ANY  DAMAGES WHATSOEVER
+RESULTING DIRECTLY OR INDIRECTLY FROM THE USE OF THIS SOFTWARE  OR  OF
+ANY DERIVATIVE WORK.
+
+Carnegie  Mellon  encourages  users  of  this  software  to return any
+improvements or extensions that  they  make,  and  to  grant  Carnegie
+Mellon the rights to redistribute these changes without encumbrance.
+*/
+
+/*
+ *
+ * Based on cfs.h from Mach, but revamped for increased simplicity.
+ * Linux modifications by 
+ * Peter Braam, Aug 1996
+ */
+
+#ifndef _UAPI_CODA_HEADER_
+#define _UAPI_CODA_HEADER_
+
+
+/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
+#if defined(__NetBSD__) || \
+  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
+#include <sys/types.h>
+#endif 
+
+#ifndef CODA_MAXSYMLINKS
+#define CODA_MAXSYMLINKS 10
+#endif
+
+#if defined(DJGPP) || defined(__CYGWIN32__)
+#ifdef KERNEL
+typedef unsigned long u_long;
+typedef unsigned int u_int;
+typedef unsigned short u_short;
+typedef u_long ino_t;
+typedef u_long dev_t;
+typedef void * caddr_t;
+#ifdef DOS
+typedef unsigned __int64 u_quad_t;
+#else 
+typedef unsigned long long u_quad_t;
+#endif
+
+#define inline
+
+struct timespec {
+        long       ts_sec;
+        long       ts_nsec;
+};
+#else  /* DJGPP but not KERNEL */
+#include <sys/time.h>
+typedef unsigned long long u_quad_t;
+#endif /* !KERNEL */
+#endif /* !DJGPP */
+
+
+#if defined(__linux__)
+#include <linux/time.h>
+#define cdev_t u_quad_t
+#ifndef __KERNEL__
+#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
+#define _UQUAD_T_ 1
+typedef unsigned long long u_quad_t;
+#endif
+#endif /* __KERNEL__ */
+#else
+#define cdev_t dev_t
+#endif
+
+#ifdef __CYGWIN32__
+struct timespec {
+        time_t  tv_sec;         /* seconds */
+        long    tv_nsec;        /* nanoseconds */
+};
+#endif
+
+#ifndef __BIT_TYPES_DEFINED__
+#define __BIT_TYPES_DEFINED__
+typedef signed char	      int8_t;
+typedef unsigned char	    u_int8_t;
+typedef short		     int16_t;
+typedef unsigned short	   u_int16_t;
+typedef int		     int32_t;
+typedef unsigned int	   u_int32_t;
+#endif
+
+
+/*
+ * Cfs constants
+ */
+#define CODA_MAXNAMLEN   255
+#define CODA_MAXPATHLEN  1024
+#define CODA_MAXSYMLINK  10
+
+/* these are Coda's version of O_RDONLY etc combinations
+ * to deal with VFS open modes
+ */
+#define	C_O_READ	0x001
+#define	C_O_WRITE       0x002
+#define C_O_TRUNC       0x010
+#define C_O_EXCL	0x100
+#define C_O_CREAT	0x200
+
+/* these are to find mode bits in Venus */ 
+#define C_M_READ  00400
+#define C_M_WRITE 00200
+
+/* for access Venus will use */
+#define C_A_C_OK    8               /* Test for writing upon create.  */
+#define C_A_R_OK    4               /* Test for read permission.  */
+#define C_A_W_OK    2               /* Test for write permission.  */
+#define C_A_X_OK    1               /* Test for execute permission.  */
+#define C_A_F_OK    0               /* Test for existence.  */
+
+
+
+#ifndef _VENUS_DIRENT_T_
+#define _VENUS_DIRENT_T_ 1
+struct venus_dirent {
+        u_int32_t d_fileno;		/* file number of entry */
+        u_int16_t d_reclen;		/* length of this record */
+        u_int8_t  d_type;			/* file type, see below */
+        u_int8_t  d_namlen;		/* length of string in d_name */
+        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
+};
+#undef DIRSIZ
+#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
+                         (((dp)->d_namlen+1 + 3) &~ 3))
+
+/*
+ * File types
+ */
+#define	CDT_UNKNOWN	 0
+#define	CDT_FIFO	 1
+#define	CDT_CHR		 2
+#define	CDT_DIR		 4
+#define	CDT_BLK		 6
+#define	CDT_REG		 8
+#define	CDT_LNK		10
+#define	CDT_SOCK	12
+#define	CDT_WHT		14
+
+/*
+ * Convert between stat structure types and directory types.
+ */
+#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
+#define	CDTTOIF(dirtype)	((dirtype) << 12)
+
+#endif
+
+#ifndef _VUID_T_
+#define _VUID_T_
+typedef u_int32_t vuid_t;
+typedef u_int32_t vgid_t;
+#endif /*_VUID_T_ */
+
+struct CodaFid {
+	u_int32_t opaque[4];
+};
+
+#define coda_f2i(fid)\
+	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
+
+#ifndef _VENUS_VATTR_T_
+#define _VENUS_VATTR_T_
+/*
+ * Vnode types.  VNON means no type.
+ */
+enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
+
+struct coda_vattr {
+	long     	va_type;	/* vnode type (for create) */
+	u_short		va_mode;	/* files access mode and type */
+	short		va_nlink;	/* number of references to file */
+	vuid_t		va_uid;		/* owner user id */
+	vgid_t		va_gid;		/* owner group id */
+	long		va_fileid;	/* file id */
+	u_quad_t	va_size;	/* file size in bytes */
+	long		va_blocksize;	/* blocksize preferred for i/o */
+	struct timespec	va_atime;	/* time of last access */
+	struct timespec	va_mtime;	/* time of last modification */
+	struct timespec	va_ctime;	/* time file changed */
+	u_long		va_gen;		/* generation number of file */
+	u_long		va_flags;	/* flags defined for file */
+	cdev_t	        va_rdev;	/* device special file represents */
+	u_quad_t	va_bytes;	/* bytes of disk space held by file */
+	u_quad_t	va_filerev;	/* file modification number */
+};
+
+#endif 
+
+/* structure used by CODA_STATFS for getting cache information from venus */
+struct coda_statfs {
+    int32_t f_blocks;
+    int32_t f_bfree;
+    int32_t f_bavail;
+    int32_t f_files;
+    int32_t f_ffree;
+};
+
+/*
+ * Kernel <--> Venus communications.
+ */
+
+#define CODA_ROOT	2
+#define CODA_OPEN_BY_FD	3
+#define CODA_OPEN	4
+#define CODA_CLOSE	5
+#define CODA_IOCTL	6
+#define CODA_GETATTR	7
+#define CODA_SETATTR	8
+#define CODA_ACCESS	9
+#define CODA_LOOKUP	10
+#define CODA_CREATE	11
+#define CODA_REMOVE	12
+#define CODA_LINK	13
+#define CODA_RENAME	14
+#define CODA_MKDIR	15
+#define CODA_RMDIR	16
+#define CODA_SYMLINK	18
+#define CODA_READLINK	19
+#define CODA_FSYNC	20
+#define CODA_VGET	22
+#define CODA_SIGNAL	23
+#define CODA_REPLACE	 24 /* DOWNCALL */
+#define CODA_FLUSH       25 /* DOWNCALL */
+#define CODA_PURGEUSER   26 /* DOWNCALL */
+#define CODA_ZAPFILE     27 /* DOWNCALL */
+#define CODA_ZAPDIR      28 /* DOWNCALL */
+#define CODA_PURGEFID    30 /* DOWNCALL */
+#define CODA_OPEN_BY_PATH 31
+#define CODA_RESOLVE     32
+#define CODA_REINTEGRATE 33
+#define CODA_STATFS	 34
+#define CODA_STORE	 35
+#define CODA_RELEASE	 36
+#define CODA_NCALLS 37
+
+#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
+
+#define VC_MAXDATASIZE	    8192
+#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
+                            VC_MAXDATASIZE  
+
+#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
+
+#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
+
+/*
+ *        Venus <-> Coda  RPC arguments
+ */
+struct coda_in_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
+    pid_t pid;
+    pid_t pgid;
+    vuid_t uid;
+};
+
+/* Really important that opcode and unique are 1st two fields! */
+struct coda_out_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	
+    u_int32_t result;
+};
+
+/* coda_root: NO_IN */
+struct coda_root_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+};
+
+struct coda_root_in {
+    struct coda_in_hdr in;
+};
+
+/* coda_open: */
+struct coda_open_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_out {
+    struct coda_out_hdr oh;
+    cdev_t	dev;
+    ino_t	inode;
+};
+
+
+/* coda_store: */
+struct coda_store_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_store_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_release: */
+struct coda_release_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_release_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_close: */
+struct coda_close_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_close_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_ioctl: */
+struct coda_ioctl_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	cmd;
+    int	len;
+    int	rwflag;
+    char *data;			/* Place holder for data. */
+};
+
+struct coda_ioctl_out {
+    struct coda_out_hdr oh;
+    int	len;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_getattr: */
+struct coda_getattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_getattr_out {
+    struct coda_out_hdr oh;
+    struct coda_vattr attr;
+};
+
+
+/* coda_setattr: NO_OUT */
+struct coda_setattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+struct coda_setattr_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_access: NO_OUT */
+struct coda_access_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_access_out {
+    struct coda_out_hdr out;
+};
+
+
+/* lookup flags */
+#define CLU_CASE_SENSITIVE     0x01
+#define CLU_CASE_INSENSITIVE   0x02
+
+/* coda_lookup: */
+struct  coda_lookup_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int         name;		/* Place holder for data. */
+    int         flags;	
+};
+
+struct coda_lookup_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* coda_create: */
+struct coda_create_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int excl;
+    int mode;
+    int 	name;		/* Place holder for data. */
+};
+
+struct coda_create_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_remove: NO_OUT */
+struct coda_remove_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_remove_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_link: NO_OUT */
+struct coda_link_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;	/* cnode to link *to* */
+    struct CodaFid destFid;	/* Directory in which to place link */
+    int tname;		/* Place holder for data. */
+};
+
+struct coda_link_out {
+    struct coda_out_hdr out;
+};
+
+
+/* coda_rename: NO_OUT */
+struct coda_rename_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;
+    int 	srcname;
+    struct CodaFid destFid;
+    int 	destname;
+};
+
+struct coda_rename_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_mkdir: */
+struct coda_mkdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int	   name;		/* Place holder for data. */
+};
+
+struct coda_mkdir_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_rmdir: NO_OUT */
+struct coda_rmdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_rmdir_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_symlink: NO_OUT */
+struct coda_symlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;	/* Directory to put symlink in */
+    int srcname;
+    struct coda_vattr attr;
+    int tname;
+};
+
+struct coda_symlink_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_readlink: */
+struct coda_readlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_readlink_out {
+    struct coda_out_hdr oh;
+    int	count;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_fsync: NO_OUT */
+struct coda_fsync_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_fsync_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_vget: */
+struct coda_vget_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_vget_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* CODA_SIGNAL is out-of-band, doesn't need data. */
+/* CODA_INVALIDATE is a venus->kernel call */
+/* CODA_FLUSH is a venus->kernel call */
+
+/* coda_purgeuser: */
+/* CODA_PURGEUSER is a venus->kernel call */
+struct coda_purgeuser_out {
+    struct coda_out_hdr oh;
+    vuid_t uid;
+};
+
+/* coda_zapfile: */
+/* CODA_ZAPFILE is a venus->kernel call */
+struct coda_zapfile_out {  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_zapdir: */
+/* CODA_ZAPDIR is a venus->kernel call */	
+struct coda_zapdir_out {	  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_purgefid: */
+/* CODA_PURGEFID is a venus->kernel call */	
+struct coda_purgefid_out { 
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_replace: */
+/* CODA_REPLACE is a venus->kernel call */	
+struct coda_replace_out { /* coda_replace is a venus->kernel call */
+    struct coda_out_hdr oh;
+    struct CodaFid NewFid;
+    struct CodaFid OldFid;
+};
+
+/* coda_open_by_fd: */
+struct coda_open_by_fd_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int        flags;
+};
+
+struct coda_open_by_fd_out {
+    struct coda_out_hdr oh;
+    int fd;
+
+#ifdef __KERNEL__
+    struct file *fh; /* not passed from userspace but used in-kernel only */
+#endif
+};
+
+/* coda_open_by_path: */
+struct coda_open_by_path_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_by_path_out {
+    struct coda_out_hdr oh;
+	int path;
+};
+
+/* coda_statfs: NO_IN */
+struct coda_statfs_in {
+    struct coda_in_hdr in;
+};
+
+struct coda_statfs_out {
+    struct coda_out_hdr oh;
+    struct coda_statfs stat;
+};
+
+/* 
+ * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
+ * For instance, if the fid is inconsistent. 
+ * This case is handled by setting the top bit of the type result parameter.
+ */
+#define CODA_NOCACHE          0x80000000
+
+union inputArgs {
+    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
+    struct coda_open_in coda_open;
+    struct coda_store_in coda_store;
+    struct coda_release_in coda_release;
+    struct coda_close_in coda_close;
+    struct coda_ioctl_in coda_ioctl;
+    struct coda_getattr_in coda_getattr;
+    struct coda_setattr_in coda_setattr;
+    struct coda_access_in coda_access;
+    struct coda_lookup_in coda_lookup;
+    struct coda_create_in coda_create;
+    struct coda_remove_in coda_remove;
+    struct coda_link_in coda_link;
+    struct coda_rename_in coda_rename;
+    struct coda_mkdir_in coda_mkdir;
+    struct coda_rmdir_in coda_rmdir;
+    struct coda_symlink_in coda_symlink;
+    struct coda_readlink_in coda_readlink;
+    struct coda_fsync_in coda_fsync;
+    struct coda_vget_in coda_vget;
+    struct coda_open_by_fd_in coda_open_by_fd;
+    struct coda_open_by_path_in coda_open_by_path;
+    struct coda_statfs_in coda_statfs;
+};
+
+union outputArgs {
+    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
+    struct coda_root_out coda_root;
+    struct coda_open_out coda_open;
+    struct coda_ioctl_out coda_ioctl;
+    struct coda_getattr_out coda_getattr;
+    struct coda_lookup_out coda_lookup;
+    struct coda_create_out coda_create;
+    struct coda_mkdir_out coda_mkdir;
+    struct coda_readlink_out coda_readlink;
+    struct coda_vget_out coda_vget;
+    struct coda_purgeuser_out coda_purgeuser;
+    struct coda_zapfile_out coda_zapfile;
+    struct coda_zapdir_out coda_zapdir;
+    struct coda_purgefid_out coda_purgefid;
+    struct coda_replace_out coda_replace;
+    struct coda_open_by_fd_out coda_open_by_fd;
+    struct coda_open_by_path_out coda_open_by_path;
+    struct coda_statfs_out coda_statfs;
+};    
+
+union coda_downcalls {
+    /* CODA_INVALIDATE is a venus->kernel call */
+    /* CODA_FLUSH is a venus->kernel call */
+    struct coda_purgeuser_out purgeuser;
+    struct coda_zapfile_out zapfile;
+    struct coda_zapdir_out zapdir;
+    struct coda_purgefid_out purgefid;
+    struct coda_replace_out replace;
+};
+
+
+/*
+ * Used for identifying usage of "Control" and pioctls
+ */
+
+#define PIOCPARM_MASK 0x0000ffff
+struct ViceIoctl {
+        void __user *in;        /* Data to be transferred in */
+        void __user *out;       /* Data to be transferred out */
+        u_short in_size;        /* Size of input buffer <= 2K */
+        u_short out_size;       /* Maximum size of output buffer, <= 2K */
+};
+
+struct PioctlData {
+        const char __user *path;
+        int follow;
+        struct ViceIoctl vi;
+};
+
+#define CODA_CONTROL		".CONTROL"
+#define CODA_CONTROLLEN		8
+#define CTL_INO			-1
+
+/* Data passed to mount */
+
+#define CODA_MOUNT_VERSION 1
+
+struct coda_mount_data {
+	int		version;
+	int		fd;       /* Opened device */
+};
+
+#endif /* _UAPI_CODA_HEADER_ */
diff --git a/include/uapi/linux/coda_psdev.h b/include/uapi/linux/coda_psdev.h
new file mode 100644
index 0000000000000000000000000000000000000000..79d05981fc4b0141b142be053a18616b3df867c1
--- /dev/null
+++ b/include/uapi/linux/coda_psdev.h
@@ -0,0 +1,27 @@
+#ifndef _UAPI__CODA_PSDEV_H
+#define _UAPI__CODA_PSDEV_H
+
+#include <linux/magic.h>
+
+#define CODA_PSDEV_MAJOR 67
+#define MAX_CODADEVS  5	   /* how many do we allow */
+
+
+/* messages between coda filesystem in kernel and Venus */
+struct upc_req {
+	struct list_head    uc_chain;
+	caddr_t	            uc_data;
+	u_short	            uc_flags;
+	u_short             uc_inSize;  /* Size is at most 5000 bytes */
+	u_short	            uc_outSize;
+	u_short	            uc_opcode;  /* copied from data to save lookup */
+	int		    uc_unique;
+	wait_queue_head_t   uc_sleep;   /* process' wait queue */
+};
+
+#define CODA_REQ_ASYNC  0x1
+#define CODA_REQ_READ   0x2
+#define CODA_REQ_WRITE  0x4
+#define CODA_REQ_ABORT  0x8
+
+#endif /* _UAPI__CODA_PSDEV_H */
diff --git a/include/linux/coff.h b/include/uapi/linux/coff.h
similarity index 100%
rename from include/linux/coff.h
rename to include/uapi/linux/coff.h
diff --git a/include/uapi/linux/connector.h b/include/uapi/linux/connector.h
new file mode 100644
index 0000000000000000000000000000000000000000..8761a0349c7436ec0728d569e0fb58d9240ece3b
--- /dev/null
+++ b/include/uapi/linux/connector.h
@@ -0,0 +1,77 @@
+/*
+ * 	connector.h
+ * 
+ * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
+ * All rights reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _UAPI__CONNECTOR_H
+#define _UAPI__CONNECTOR_H
+
+#include <linux/types.h>
+
+/*
+ * Process Events connector unique ids -- used for message routing
+ */
+#define CN_IDX_PROC			0x1
+#define CN_VAL_PROC			0x1
+#define CN_IDX_CIFS			0x2
+#define CN_VAL_CIFS                     0x1
+#define CN_W1_IDX			0x3	/* w1 communication */
+#define CN_W1_VAL			0x1
+#define CN_IDX_V86D			0x4
+#define CN_VAL_V86D_UVESAFB		0x1
+#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
+#define CN_DST_IDX			0x6
+#define CN_DST_VAL			0x1
+#define CN_IDX_DM			0x7	/* Device Mapper */
+#define CN_VAL_DM_USERSPACE_LOG		0x1
+#define CN_IDX_DRBD			0x8
+#define CN_VAL_DRBD			0x1
+#define CN_KVP_IDX			0x9	/* HyperV KVP */
+#define CN_KVP_VAL			0x1	/* queries from the kernel */
+
+#define CN_NETLINK_USERS		10	/* Highest index + 1 */
+
+/*
+ * Maximum connector's message size.
+ */
+#define CONNECTOR_MAX_MSG_SIZE		16384
+
+/*
+ * idx and val are unique identifiers which 
+ * are used for message routing and 
+ * must be registered in connector.h for in-kernel usage.
+ */
+
+struct cb_id {
+	__u32 idx;
+	__u32 val;
+};
+
+struct cn_msg {
+	struct cb_id id;
+
+	__u32 seq;
+	__u32 ack;
+
+	__u16 len;		/* Length of the following data */
+	__u16 flags;
+	__u8 data[0];
+};
+
+#endif /* _UAPI__CONNECTOR_H */
diff --git a/include/linux/const.h b/include/uapi/linux/const.h
similarity index 100%
rename from include/linux/const.h
rename to include/uapi/linux/const.h
diff --git a/include/uapi/linux/cramfs_fs.h b/include/uapi/linux/cramfs_fs.h
new file mode 100644
index 0000000000000000000000000000000000000000..e4611a9b9243fbbdbb84067841323aeb68e1196d
--- /dev/null
+++ b/include/uapi/linux/cramfs_fs.h
@@ -0,0 +1,88 @@
+#ifndef _UAPI__CRAMFS_H
+#define _UAPI__CRAMFS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#define CRAMFS_SIGNATURE	"Compressed ROMFS"
+
+/*
+ * Width of various bitfields in struct cramfs_inode.
+ * Primarily used to generate warnings in mkcramfs.
+ */
+#define CRAMFS_MODE_WIDTH 16
+#define CRAMFS_UID_WIDTH 16
+#define CRAMFS_SIZE_WIDTH 24
+#define CRAMFS_GID_WIDTH 8
+#define CRAMFS_NAMELEN_WIDTH 6
+#define CRAMFS_OFFSET_WIDTH 26
+
+/*
+ * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
+ * path length is 63 << 2 = 252.
+ */
+#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
+
+/*
+ * Reasonably terse representation of the inode data.
+ */
+struct cramfs_inode {
+	__u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
+	/* SIZE for device files is i_rdev */
+	__u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
+	/* NAMELEN is the length of the file name, divided by 4 and
+           rounded up.  (cramfs doesn't support hard links.) */
+	/* OFFSET: For symlinks and non-empty regular files, this
+	   contains the offset (divided by 4) of the file data in
+	   compressed form (starting with an array of block pointers;
+	   see README).  For non-empty directories it is the offset
+	   (divided by 4) of the inode of the first file in that
+	   directory.  For anything else, offset is zero. */
+	__u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
+};
+
+struct cramfs_info {
+	__u32 crc;
+	__u32 edition;
+	__u32 blocks;
+	__u32 files;
+};
+
+/*
+ * Superblock information at the beginning of the FS.
+ */
+struct cramfs_super {
+	__u32 magic;			/* 0x28cd3d45 - random number */
+	__u32 size;			/* length in bytes */
+	__u32 flags;			/* feature flags */
+	__u32 future;			/* reserved for future use */
+	__u8 signature[16];		/* "Compressed ROMFS" */
+	struct cramfs_info fsid;	/* unique filesystem info */
+	__u8 name[16];			/* user-defined name */
+	struct cramfs_inode root;	/* root inode data */
+};
+
+/*
+ * Feature flags
+ *
+ * 0x00000000 - 0x000000ff: features that work for all past kernels
+ * 0x00000100 - 0xffffffff: features that don't work for past kernels
+ */
+#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
+#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
+#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
+#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
+#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
+
+/*
+ * Valid values in super.flags.  Currently we refuse to mount
+ * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
+ * changed to test super.future instead.
+ */
+#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
+				| CRAMFS_FLAG_HOLES \
+				| CRAMFS_FLAG_WRONG_SIGNATURE \
+				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
+
+
+#endif /* _UAPI__CRAMFS_H */
diff --git a/include/uapi/linux/cuda.h b/include/uapi/linux/cuda.h
new file mode 100644
index 0000000000000000000000000000000000000000..286f9f10fce8623530370b7472d2e22c79d92232
--- /dev/null
+++ b/include/uapi/linux/cuda.h
@@ -0,0 +1,33 @@
+/*
+ * Definitions for talking to the CUDA.  The CUDA is a microcontroller
+ * which controls the ADB, system power, RTC, and various other things.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifndef _UAPI_LINUX_CUDA_H
+#define _UAPI_LINUX_CUDA_H
+
+/* CUDA commands (2nd byte) */
+#define CUDA_WARM_START		0
+#define CUDA_AUTOPOLL		1
+#define CUDA_GET_6805_ADDR	2
+#define CUDA_GET_TIME		3
+#define CUDA_GET_PRAM		7
+#define CUDA_SET_6805_ADDR	8
+#define CUDA_SET_TIME		9
+#define CUDA_POWERDOWN		0xa
+#define CUDA_POWERUP_TIME	0xb
+#define CUDA_SET_PRAM		0xc
+#define CUDA_MS_RESET		0xd
+#define CUDA_SEND_DFAC		0xe
+#define CUDA_RESET_SYSTEM	0x11
+#define CUDA_SET_IPL		0x12
+#define CUDA_SET_AUTO_RATE	0x14
+#define CUDA_GET_AUTO_RATE	0x16
+#define CUDA_SET_DEVICE_LIST	0x19
+#define CUDA_GET_DEVICE_LIST	0x1a
+#define CUDA_GET_SET_IIC	0x22
+
+
+#endif /* _UAPI_LINUX_CUDA_H */
diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h
new file mode 100644
index 0000000000000000000000000000000000000000..12b587aa361c4225a8add0e37d34528d4b728f73
--- /dev/null
+++ b/include/uapi/linux/cyclades.h
@@ -0,0 +1,493 @@
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1  2002/01/29 11:36:16  henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1  2000/04/19 18:52:52  ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0  1998/11/02 14:20:59  ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5  1998/08/03 16:57:01  ivan
+ *added cyclades_idle_stats structure;
+ * 
+ *Revision 2.4  1998/06/01 12:09:53  ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3  1998/03/16 18:01:12  ivan
+ *changes in the cyclades_port structure to get it closer to the 
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2  1998/02/17 16:50:00  ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and 
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1	1997/10/24 16:03:00  ivan
+ *added rflow (which allows enabling the CD1400 special flow control 
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0  1997/06/30 10:30:00  ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8  1997/06/03 15:30:00  ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7  1997/03/26 10:30:00  daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6  1996/09/09 18:35:30  bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5  1995/11/13 21:13:31  bentson
+ *changes suggested by Michael Chastain <mec@duracef.shout.net>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _UAPI_LINUX_CYCLADES_H
+#define _UAPI_LINUX_CYCLADES_H
+
+#include <linux/types.h>
+
+struct cyclades_monitor {
+        unsigned long           int_count;
+        unsigned long           char_count;
+        unsigned long           char_max;
+        unsigned long           char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+    __kernel_time_t in_use;	/* Time device has been in use (secs) */
+    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
+    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
+    unsigned long  recv_bytes;	/* Bytes received */
+    unsigned long  xmit_bytes;	/* Bytes transmitted */
+    unsigned long  overruns;	/* Input overruns */
+    unsigned long  frame_errs;	/* Input framing errors */
+    unsigned long  parity_errs;	/* Input parity errors */
+};
+
+#define CYCLADES_MAGIC  0x4359
+
+#define CYGETMON                0x435901
+#define CYGETTHRESH             0x435902
+#define CYSETTHRESH             0x435903
+#define CYGETDEFTHRESH          0x435904
+#define CYSETDEFTHRESH          0x435905
+#define CYGETTIMEOUT            0x435906
+#define CYSETTIMEOUT            0x435907
+#define CYGETDEFTIMEOUT         0x435908
+#define CYSETDEFTIMEOUT         0x435909
+#define CYSETRFLOW		0x43590a
+#define CYGETRFLOW		0x43590b
+#define CYSETRTSDTR_INV		0x43590c
+#define CYGETRTSDTR_INV		0x43590d
+#define CYZSETPOLLCYCLE		0x43590e
+#define CYZGETPOLLCYCLE		0x43590f
+#define CYGETCD1400VER		0x435910
+#define	CYSETWAIT		0x435912
+#define	CYGETWAIT		0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC           ('M' << 8)
+#define CZ_NBOARDS      (CZIOC|0xfa)
+#define CZ_BOOT_START   (CZIOC|0xfb)
+#define CZ_BOOT_DATA    (CZIOC|0xfc)
+#define CZ_BOOT_END     (CZIOC|0xfd)
+#define CZ_TEST         (CZIOC|0xfe)
+
+#define CZ_DEF_POLL	(HZ/25)
+
+#define MAX_BOARD       4       /* Max number of boards */
+#define MAX_DEV         256     /* Max number of ports total */
+#define	CYZ_MAX_SPEED	921600
+
+#define	CYZ_FIFO_SIZE	16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+        unsigned short  nboard;
+        int             status[MAX_BOARD];
+        int             nchannel[MAX_BOARD];
+        int             fw_rev[MAX_BOARD];
+        unsigned long   offset;
+        unsigned long   data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/*
+ *	Memory Window Sizes
+ */
+
+#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
+#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
+						  8Zo V.2 */
+#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
+
+/*
+ *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ *	normally will access only interested on the fpga_id, fpga_version,
+ *	start_cpu and stop_cpu.
+ */
+
+struct	CUSTOM_REG {
+	__u32	fpga_id;		/* FPGA Identification Register */
+	__u32	fpga_version;		/* FPGA Version Number Register */
+	__u32	cpu_start;		/* CPU start Register (write) */
+	__u32	cpu_stop;		/* CPU stop Register (write) */
+	__u32	misc_reg;		/* Miscellaneous Register */
+	__u32	idt_mode;		/* IDT mode Register */
+	__u32	uart_irq_status;	/* UART IRQ status Register */
+	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
+	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
+	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
+	__u32	test_register;		/* Test Register */
+	__u32	test_count;		/* Test Count Register */
+	__u32	timer_select;		/* Timer select register */
+	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
+	__u32	ram_wait_state;		/* RAM wait-state Register */
+	__u32	uart_wait_state;	/* UART wait-state Register */
+	__u32	timer_wait_state;	/* timer wait-state Register */
+	__u32	ack_wait_state;		/* ACK wait State Register */
+};
+
+/*
+ *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ *	registers. This structure can be used to access the 9060 registers
+ *	(memory mapped).
+ */
+
+struct RUNTIME_9060 {
+	__u32	loc_addr_range;	/* 00h - Local Address Range */
+	__u32	loc_addr_base;	/* 04h - Local Address Base */
+	__u32	loc_arbitr;	/* 08h - Local Arbitration */
+	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
+	__u32	loc_rom_range;	/* 10h - Local ROM Range */
+	__u32	loc_rom_base;	/* 14h - Local ROM Base */
+	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
+	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
+	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
+	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
+	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
+	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
+	__u32	filler1;	/* 30h */
+	__u32	filler2;	/* 34h */
+	__u32	filler3;	/* 38h */
+	__u32	filler4;	/* 3Ch */
+	__u32	mail_box_0;	/* 40h - Mail Box 0 */
+	__u32	mail_box_1;	/* 44h - Mail Box 1 */
+	__u32	mail_box_2;	/* 48h - Mail Box 2 */
+	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
+	__u32	filler5;	/* 50h */
+	__u32	filler6;	/* 54h */
+	__u32	filler7;	/* 58h */
+	__u32	filler8;	/* 5Ch */
+	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
+	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
+	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
+	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
+#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
+#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
+#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
+#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ *	This file contains the definitions for interfacing with the
+ *	Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define	MAX_CHAN	64		/* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
+#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
+#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
+#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
+
+#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
+					   (1000 ms) */
+#define	ZF_TINACT	ZF_TINACT_DEF
+
+struct	FIRM_ID {
+	__u32	signature;		/* ZFIRM/U signature */
+	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define	C_OS_LINUX	0x00000030	/* generic Linux system */
+
+/* channel op_mode */
+
+#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
+#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
+#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
+#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
+#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
+
+/* comm_parity - parity */
+
+#define	C_PR_NONE	0x00000000	/* None */
+#define	C_PR_ODD	0x00000001	/* Odd */
+#define C_PR_EVEN	0x00000002	/* Even */
+#define C_PR_MARK	0x00000004	/* Mark */
+#define C_PR_SPACE	0x00000008	/* Space */
+#define C_PR_PARITY	0x000000ff
+
+#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
+#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5	0x00000001
+#define C_DL_CS6	0x00000002
+#define C_DL_CS7	0x00000004
+#define C_DL_CS8	0x00000008
+#define	C_DL_CS		0x0000000f
+#define C_DL_1STOP	0x00000010
+#define C_DL_15STOP	0x00000020
+#define C_DL_2STOP	0x00000040
+#define	C_DL_STOP	0x000000f0
+
+/* interrupt enabling/status */
+
+#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
+#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
+#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
+#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
+#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
+#define	C_IN_MDCD	0x00000100	/* modem DCD change */
+#define	C_IN_MDSR	0x00000200	/* modem DSR change */
+#define	C_IN_MRI	0x00000400	/* modem RI change */
+#define	C_IN_MCTS	0x00000800	/* modem CTS change */
+#define	C_IN_RXBRK	0x00001000	/* Break received */
+#define	C_IN_PR_ERROR	0x00002000	/* parity error */
+#define	C_IN_FR_ERROR	0x00004000	/* frame error */
+#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
+#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
+#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
+#define C_IN_MRTS	0x00040000	/* modem RTS drop */
+#define C_IN_ICHAR	0x00080000
+ 
+/* flow control */
+
+#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
+#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
+#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
+#define	C_FL_SWFLOW	0x0000000f
+
+/* flow status */
+
+#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
+#define	C_FS_SENDING	0x00000001	/* UART is sending data */
+#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
+					   IOCTLM command */
+#define	C_RS_RTS	0x00000001	/* RTS */
+#define	C_RS_DTR	0x00000004	/* DTR */
+#define	C_RS_DCD	0x00000100	/* CD */
+#define	C_RS_DSR	0x00000200	/* DSR */
+#define	C_RS_RI		0x00000400	/* RI */
+#define	C_RS_CTS	0x00000800	/* CTS */
+
+/* commands Host <-> Board */
+
+#define	C_CM_RESET	0x01		/* reset/flush buffers */
+#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
+#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
+#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
+#define	C_CM_SENDXOFF	0x10		/* send Xoff */
+#define	C_CM_SENDXON	0x11		/* send Xon */
+#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
+#define	C_CM_SENDBRK	0x41		/* send break */
+#define	C_CM_INTBACK	0x42		/* Interrupt back */
+#define	C_CM_SET_BREAK	0x43		/* Tx break on */
+#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
+#define	C_CM_CMD_DONE	0x45		/* Previous command done */
+#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
+#define	C_CM_TINACT	0x51		/* set inactivity detection */
+#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
+#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
+#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
+#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
+#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
+#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
+#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
+					   driver */
+#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
+					   driver */
+
+#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
+#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
+#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
+#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
+#define	C_CM_TXFEMPTY	0x64
+#define	C_CM_ICHAR	0x65
+#define	C_CM_MDCD	0x70		/* modem DCD change */
+#define	C_CM_MDSR	0x71		/* modem DSR change */
+#define	C_CM_MRI	0x72		/* modem RI change */
+#define	C_CM_MCTS	0x73		/* modem CTS change */
+#define C_CM_MRTS	0x74		/* modem RTS drop */
+#define	C_CM_RXBRK	0x84		/* Break received */
+#define	C_CM_PR_ERROR	0x85		/* Parity error */
+#define	C_CM_FR_ERROR	0x86		/* Frame error */
+#define C_CM_OVR_ERROR  0x87            /* Overrun error */
+#define C_CM_RXOFL	0x88            /* RX buffer overflow */
+#define	C_CM_CMDERROR	0x90		/* command error */
+#define	C_CM_FATAL	0x91		/* fatal error */
+#define	C_CM_HW_RESET	0x92		/* reset board */
+
+/*
+ *	CH_CTRL - This per port structure contains all parameters
+ *	that control an specific port. It can be seen as the
+ *	configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+	__u32	op_mode;	/* operation mode */
+	__u32	intr_enable;	/* interrupt masking */
+	__u32	sw_flow;	/* SW flow control */
+	__u32	flow_status;	/* output flow status */
+	__u32	comm_baud;	/* baud rate  - numerically specified */
+	__u32	comm_parity;	/* parity */
+	__u32	comm_data_l;	/* data length/stop */
+	__u32	comm_flags;	/* other flags */
+	__u32	hw_flow;	/* HW flow control */
+	__u32	rs_control;	/* RS-232 outputs */
+	__u32	rs_status;	/* RS-232 inputs */
+	__u32	flow_xon;	/* xon char */
+	__u32	flow_xoff;	/* xoff char */
+	__u32	hw_overflow;	/* hw overflow counter */
+	__u32	sw_overflow;	/* sw overflow counter */
+	__u32	comm_error;	/* frame/parity error counter */
+	__u32 ichar;
+	__u32 filler[7];
+};
+
+
+/*
+ *	BUF_CTRL - This per channel structure contains
+ *	all Tx and Rx buffer control for a given channel.
+ */
+
+struct	BUF_CTRL	{
+	__u32	flag_dma;	/* buffers are in Host memory */
+	__u32	tx_bufaddr;	/* address of the tx buffer */
+	__u32	tx_bufsize;	/* tx buffer size */
+	__u32	tx_threshold;	/* tx low water mark */
+	__u32	tx_get;		/* tail index tx buf */
+	__u32	tx_put;		/* head index tx buf */
+	__u32	rx_bufaddr;	/* address of the rx buffer */
+	__u32	rx_bufsize;	/* rx buffer size */
+	__u32	rx_threshold;	/* rx high water mark */
+	__u32	rx_get;		/* tail index rx buf */
+	__u32	rx_put;		/* head index rx buf */
+	__u32	filler[5];	/* filler to align structures */
+};
+
+/*
+ *	BOARD_CTRL - This per board structure contains all global 
+ *	control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+	/* static info provided by the on-board CPU */
+	__u32	n_channel;	/* number of channels */
+	__u32	fw_version;	/* firmware version */
+
+	/* static info provided by the driver */
+	__u32	op_system;	/* op_system id */
+	__u32	dr_version;	/* driver version */
+
+	/* board control area */
+	__u32	inactivity;	/* inactivity control */
+
+	/* host to FW commands */
+	__u32	hcmd_channel;	/* channel number */
+	__u32	hcmd_param;	/* pointer to parameters */
+
+	/* FW to Host commands */
+	__u32	fwcmd_channel;	/* channel number */
+	__u32	fwcmd_param;	/* pointer to parameters */
+	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+	/* filler so the structures are aligned */
+	__u32	filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE	(10*MAX_CHAN)
+
+struct	INT_QUEUE {
+	unsigned char	intr_code[QUEUE_SIZE];
+	unsigned long	channel[QUEUE_SIZE];
+	unsigned long	param[QUEUE_SIZE];
+	unsigned long	put;
+	unsigned long	get;
+};
+
+/*
+ *	ZFW_CTRL - This is the data structure that includes all other
+ *	data structures used by the Firmware.
+ */
+ 
+struct ZFW_CTRL {
+	struct BOARD_CTRL	board_ctrl;
+	struct CH_CTRL		ch_ctrl[MAX_CHAN];
+	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+#endif /* _UAPI_LINUX_CYCLADES_H */
diff --git a/include/linux/cycx_cfm.h b/include/uapi/linux/cycx_cfm.h
similarity index 100%
rename from include/linux/cycx_cfm.h
rename to include/uapi/linux/cycx_cfm.h
diff --git a/include/linux/dcbnl.h b/include/uapi/linux/dcbnl.h
similarity index 100%
rename from include/linux/dcbnl.h
rename to include/uapi/linux/dcbnl.h
diff --git a/include/uapi/linux/dccp.h b/include/uapi/linux/dccp.h
new file mode 100644
index 0000000000000000000000000000000000000000..52a9cd7307e72fd838bf985add906455efe4965a
--- /dev/null
+++ b/include/uapi/linux/dccp.h
@@ -0,0 +1,237 @@
+#ifndef _UAPI_LINUX_DCCP_H
+#define _UAPI_LINUX_DCCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/**
+ * struct dccp_hdr - generic part of DCCP packet header
+ *
+ * @dccph_sport - Relevant port on the endpoint that sent this packet
+ * @dccph_dport - Relevant port on the other endpoint
+ * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
+ * @dccph_ccval - Used by the HC-Sender CCID
+ * @dccph_cscov - Parts of the packet that are covered by the Checksum field
+ * @dccph_checksum - Internet checksum, depends on dccph_cscov
+ * @dccph_x - 0 = 24 bit sequence number, 1 = 48
+ * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
+ * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
+ */
+struct dccp_hdr {
+	__be16	dccph_sport,
+		dccph_dport;
+	__u8	dccph_doff;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	dccph_cscov:4,
+		dccph_ccval:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	dccph_ccval:4,
+		dccph_cscov:4;
+#else
+#error  "Adjust your <asm/byteorder.h> defines"
+#endif
+	__sum16	dccph_checksum;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	dccph_x:1,
+		dccph_type:4,
+		dccph_reserved:3;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	dccph_reserved:3,
+		dccph_type:4,
+		dccph_x:1;
+#else
+#error  "Adjust your <asm/byteorder.h> defines"
+#endif
+	__u8	dccph_seq2;
+	__be16	dccph_seq;
+};
+
+/**
+ * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
+ *
+ * @dccph_seq_low - low 24 bits of a 48 bit seq packet
+ */
+struct dccp_hdr_ext {
+	__be32	dccph_seq_low;
+};
+
+/**
+ * struct dccp_hdr_request - Connection initiation request header
+ *
+ * @dccph_req_service - Service to which the client app wants to connect
+ */
+struct dccp_hdr_request {
+	__be32	dccph_req_service;
+};
+/**
+ * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
+ *
+ * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
+ * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
+ */
+struct dccp_hdr_ack_bits {
+	__be16	dccph_reserved1;
+	__be16	dccph_ack_nr_high;
+	__be32	dccph_ack_nr_low;
+};
+/**
+ * struct dccp_hdr_response - Connection initiation response header
+ *
+ * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
+ * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
+ */
+struct dccp_hdr_response {
+	struct dccp_hdr_ack_bits	dccph_resp_ack;
+	__be32				dccph_resp_service;
+};
+
+/**
+ * struct dccp_hdr_reset - Unconditionally shut down a connection
+ *
+ * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
+ * @dccph_reset_code - one of %dccp_reset_codes
+ * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
+ */
+struct dccp_hdr_reset {
+	struct dccp_hdr_ack_bits	dccph_reset_ack;
+	__u8				dccph_reset_code,
+					dccph_reset_data[3];
+};
+
+enum dccp_pkt_type {
+	DCCP_PKT_REQUEST = 0,
+	DCCP_PKT_RESPONSE,
+	DCCP_PKT_DATA,
+	DCCP_PKT_ACK,
+	DCCP_PKT_DATAACK,
+	DCCP_PKT_CLOSEREQ,
+	DCCP_PKT_CLOSE,
+	DCCP_PKT_RESET,
+	DCCP_PKT_SYNC,
+	DCCP_PKT_SYNCACK,
+	DCCP_PKT_INVALID,
+};
+
+#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
+
+static inline unsigned int dccp_packet_hdr_len(const __u8 type)
+{
+	if (type == DCCP_PKT_DATA)
+		return 0;
+	if (type == DCCP_PKT_DATAACK	||
+	    type == DCCP_PKT_ACK	||
+	    type == DCCP_PKT_SYNC	||
+	    type == DCCP_PKT_SYNCACK	||
+	    type == DCCP_PKT_CLOSE	||
+	    type == DCCP_PKT_CLOSEREQ)
+		return sizeof(struct dccp_hdr_ack_bits);
+	if (type == DCCP_PKT_REQUEST)
+		return sizeof(struct dccp_hdr_request);
+	if (type == DCCP_PKT_RESPONSE)
+		return sizeof(struct dccp_hdr_response);
+	return sizeof(struct dccp_hdr_reset);
+}
+enum dccp_reset_codes {
+	DCCP_RESET_CODE_UNSPECIFIED = 0,
+	DCCP_RESET_CODE_CLOSED,
+	DCCP_RESET_CODE_ABORTED,
+	DCCP_RESET_CODE_NO_CONNECTION,
+	DCCP_RESET_CODE_PACKET_ERROR,
+	DCCP_RESET_CODE_OPTION_ERROR,
+	DCCP_RESET_CODE_MANDATORY_ERROR,
+	DCCP_RESET_CODE_CONNECTION_REFUSED,
+	DCCP_RESET_CODE_BAD_SERVICE_CODE,
+	DCCP_RESET_CODE_TOO_BUSY,
+	DCCP_RESET_CODE_BAD_INIT_COOKIE,
+	DCCP_RESET_CODE_AGGRESSION_PENALTY,
+
+	DCCP_MAX_RESET_CODES		/* Leave at the end!  */
+};
+
+/* DCCP options */
+enum {
+	DCCPO_PADDING = 0,
+	DCCPO_MANDATORY = 1,
+	DCCPO_MIN_RESERVED = 3,
+	DCCPO_MAX_RESERVED = 31,
+	DCCPO_CHANGE_L = 32,
+	DCCPO_CONFIRM_L = 33,
+	DCCPO_CHANGE_R = 34,
+	DCCPO_CONFIRM_R = 35,
+	DCCPO_NDP_COUNT = 37,
+	DCCPO_ACK_VECTOR_0 = 38,
+	DCCPO_ACK_VECTOR_1 = 39,
+	DCCPO_TIMESTAMP = 41,
+	DCCPO_TIMESTAMP_ECHO = 42,
+	DCCPO_ELAPSED_TIME = 43,
+	DCCPO_MAX = 45,
+	DCCPO_MIN_RX_CCID_SPECIFIC = 128,	/* from sender to receiver */
+	DCCPO_MAX_RX_CCID_SPECIFIC = 191,
+	DCCPO_MIN_TX_CCID_SPECIFIC = 192,	/* from receiver to sender */
+	DCCPO_MAX_TX_CCID_SPECIFIC = 255,
+};
+/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
+#define DCCP_SINGLE_OPT_MAXLEN	253
+
+/* DCCP CCIDS */
+enum {
+	DCCPC_CCID2 = 2,
+	DCCPC_CCID3 = 3,
+};
+
+/* DCCP features (RFC 4340 section 6.4) */
+enum dccp_feature_numbers {
+	DCCPF_RESERVED = 0,
+	DCCPF_CCID = 1,
+	DCCPF_SHORT_SEQNOS = 2,
+	DCCPF_SEQUENCE_WINDOW = 3,
+	DCCPF_ECN_INCAPABLE = 4,
+	DCCPF_ACK_RATIO = 5,
+	DCCPF_SEND_ACK_VECTOR = 6,
+	DCCPF_SEND_NDP_COUNT = 7,
+	DCCPF_MIN_CSUM_COVER = 8,
+	DCCPF_DATA_CHECKSUM = 9,
+	/* 10-127 reserved */
+	DCCPF_MIN_CCID_SPECIFIC = 128,
+	DCCPF_SEND_LEV_RATE = 192,	/* RFC 4342, sec. 8.4 */
+	DCCPF_MAX_CCID_SPECIFIC = 255,
+};
+
+/* DCCP socket control message types for cmsg */
+enum dccp_cmsg_type {
+	DCCP_SCM_PRIORITY = 1,
+	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
+	/* ^-- Up to here reserved exclusively for qpolicy parameters */
+	DCCP_SCM_MAX
+};
+
+/* DCCP priorities for outgoing/queued packets */
+enum dccp_packet_dequeueing_policy {
+	DCCPQ_POLICY_SIMPLE,
+	DCCPQ_POLICY_PRIO,
+	DCCPQ_POLICY_MAX
+};
+
+/* DCCP socket options */
+#define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
+#define DCCP_SOCKOPT_SERVICE		2
+#define DCCP_SOCKOPT_CHANGE_L		3
+#define DCCP_SOCKOPT_CHANGE_R		4
+#define DCCP_SOCKOPT_GET_CUR_MPS	5
+#define DCCP_SOCKOPT_SERVER_TIMEWAIT	6
+#define DCCP_SOCKOPT_SEND_CSCOV		10
+#define DCCP_SOCKOPT_RECV_CSCOV		11
+#define DCCP_SOCKOPT_AVAILABLE_CCIDS	12
+#define DCCP_SOCKOPT_CCID		13
+#define DCCP_SOCKOPT_TX_CCID		14
+#define DCCP_SOCKOPT_RX_CCID		15
+#define DCCP_SOCKOPT_QPOLICY_ID		16
+#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
+#define DCCP_SOCKOPT_CCID_RX_INFO	128
+#define DCCP_SOCKOPT_CCID_TX_INFO	192
+
+/* maximum number of services provided on the same listening port */
+#define DCCP_SERVICE_LIST_MAX_LEN      32
+
+
+#endif /* _UAPI_LINUX_DCCP_H */
diff --git a/include/uapi/linux/dlm.h b/include/uapi/linux/dlm.h
new file mode 100644
index 0000000000000000000000000000000000000000..1f73cc06168f7d78c59052241b3cf9279801c298
--- /dev/null
+++ b/include/uapi/linux/dlm.h
@@ -0,0 +1,75 @@
+/******************************************************************************
+*******************************************************************************
+**
+**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
+**  Copyright (C) 2004-2011 Red Hat, Inc.  All rights reserved.
+**
+**  This copyrighted material is made available to anyone wishing to use,
+**  modify, copy, or redistribute it subject to the terms and conditions
+**  of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef _UAPI__DLM_DOT_H__
+#define _UAPI__DLM_DOT_H__
+
+/*
+ * Interface to Distributed Lock Manager (DLM)
+ * routines and structures to use DLM lockspaces
+ */
+
+/* Lock levels and flags are here */
+#include <linux/dlmconstants.h>
+#include <linux/types.h>
+
+typedef void dlm_lockspace_t;
+
+/*
+ * Lock status block
+ *
+ * Use this structure to specify the contents of the lock value block.  For a
+ * conversion request, this structure is used to specify the lock ID of the
+ * lock.  DLM writes the status of the lock request and the lock ID assigned
+ * to the request in the lock status block.
+ *
+ * sb_lkid: the returned lock ID.  It is set on new (non-conversion) requests.
+ * It is available when dlm_lock returns.
+ *
+ * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
+ * shown for the DLM_LKF_VALBLK flag.
+ *
+ * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
+ * it was first demoted to NL to avoid conversion deadlock.
+ * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
+ *
+ * sb_status: the returned status of the lock request set prior to AST
+ * execution.  Possible return values:
+ *
+ * 0 if lock request was successful
+ * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
+ * -DLM_EUNLOCK if unlock request was successful
+ * -DLM_ECANCEL if a cancel completed successfully
+ * -EDEADLK if a deadlock was detected
+ * -ETIMEDOUT if the lock request was canceled due to a timeout
+ */
+
+#define DLM_SBF_DEMOTED		0x01
+#define DLM_SBF_VALNOTVALID	0x02
+#define DLM_SBF_ALTMODE		0x04
+
+struct dlm_lksb {
+	int 	 sb_status;
+	__u32	 sb_lkid;
+	char 	 sb_flags;
+	char *	 sb_lvbptr;
+};
+
+/* dlm_new_lockspace() flags */
+
+#define DLM_LSFL_TIMEWARN	0x00000002
+#define DLM_LSFL_FS     	0x00000004
+#define DLM_LSFL_NEWEXCL     	0x00000008
+
+
+#endif /* _UAPI__DLM_DOT_H__ */
diff --git a/include/linux/dlm_device.h b/include/uapi/linux/dlm_device.h
similarity index 100%
rename from include/linux/dlm_device.h
rename to include/uapi/linux/dlm_device.h
diff --git a/include/linux/dlm_netlink.h b/include/uapi/linux/dlm_netlink.h
similarity index 100%
rename from include/linux/dlm_netlink.h
rename to include/uapi/linux/dlm_netlink.h
diff --git a/include/uapi/linux/dlm_plock.h b/include/uapi/linux/dlm_plock.h
new file mode 100644
index 0000000000000000000000000000000000000000..6ae692c909cba1c52499b864103c9bad0736cffa
--- /dev/null
+++ b/include/uapi/linux/dlm_plock.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef _UAPI__DLM_PLOCK_DOT_H__
+#define _UAPI__DLM_PLOCK_DOT_H__
+
+#include <linux/types.h>
+
+#define DLM_PLOCK_MISC_NAME		"dlm_plock"
+
+#define DLM_PLOCK_VERSION_MAJOR	1
+#define DLM_PLOCK_VERSION_MINOR	2
+#define DLM_PLOCK_VERSION_PATCH	0
+
+enum {
+	DLM_PLOCK_OP_LOCK = 1,
+	DLM_PLOCK_OP_UNLOCK,
+	DLM_PLOCK_OP_GET,
+};
+
+#define DLM_PLOCK_FL_CLOSE 1
+
+struct dlm_plock_info {
+	__u32 version[3];
+	__u8 optype;
+	__u8 ex;
+	__u8 wait;
+	__u8 flags;
+	__u32 pid;
+	__s32 nodeid;
+	__s32 rv;
+	__u32 fsid;
+	__u64 number;
+	__u64 start;
+	__u64 end;
+	__u64 owner;
+};
+
+
+#endif /* _UAPI__DLM_PLOCK_DOT_H__ */
diff --git a/include/linux/dlmconstants.h b/include/uapi/linux/dlmconstants.h
similarity index 100%
rename from include/linux/dlmconstants.h
rename to include/uapi/linux/dlmconstants.h
diff --git a/include/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h
similarity index 100%
rename from include/linux/dm-ioctl.h
rename to include/uapi/linux/dm-ioctl.h
diff --git a/include/linux/dm-log-userspace.h b/include/uapi/linux/dm-log-userspace.h
similarity index 100%
rename from include/linux/dm-log-userspace.h
rename to include/uapi/linux/dm-log-userspace.h
diff --git a/include/linux/dn.h b/include/uapi/linux/dn.h
similarity index 100%
rename from include/linux/dn.h
rename to include/uapi/linux/dn.h
diff --git a/include/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h
similarity index 100%
rename from include/linux/dqblk_xfs.h
rename to include/uapi/linux/dqblk_xfs.h
diff --git a/include/uapi/linux/edd.h b/include/uapi/linux/edd.h
new file mode 100644
index 0000000000000000000000000000000000000000..89240a04e4c8a1a1f0ea3e562b506759bfcf1fe6
--- /dev/null
+++ b/include/uapi/linux/edd.h
@@ -0,0 +1,191 @@
+/*
+ * linux/include/linux/edd.h
+ *  Copyright (C) 2002, 2003, 2004 Dell Inc.
+ *  by Matt Domsch <Matt_Domsch@dell.com>
+ *
+ * structures and definitions for the int 13h, ax={41,48}h
+ * BIOS Enhanced Disk Drive Services
+ * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
+ * available at http://www.t13.org/docs2002/d1572r0.pdf.  It is
+ * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf
+ *
+ * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch
+ * table in the boot_params that contains a list of BIOS-enumerated
+ * boot devices.
+ * In arch/{i386,x86_64}/kernel/setup.c, this information is
+ * transferred into the edd structure, and in drivers/firmware/edd.c, that
+ * information is used to identify BIOS boot disk.  The code in setup.S
+ * is very sensitive to the size of these structures.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _UAPI_LINUX_EDD_H
+#define _UAPI_LINUX_EDD_H
+
+#include <linux/types.h>
+
+#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
+				   in boot_params - treat this as 1 byte  */
+#define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
+#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
+#define EDDEXTSIZE 8		/* change these if you muck with the structures */
+#define EDDPARMSIZE 74
+#define CHECKEXTENSIONSPRESENT 0x41
+#define GETDEVICEPARAMETERS 0x48
+#define LEGACYGETDEVICEPARAMETERS 0x08
+#define EDDMAGIC1 0x55AA
+#define EDDMAGIC2 0xAA55
+
+
+#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
+#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
+#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
+#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
+#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
+				     in boot_params - treat this as 1 byte  */
+
+#ifndef __ASSEMBLY__
+
+#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
+#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
+#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
+#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
+
+#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
+#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
+#define EDD_INFO_REMOVABLE                     (1 << 2)
+#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
+#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
+#define EDD_INFO_LOCKABLE                      (1 << 5)
+#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
+#define EDD_INFO_USE_INT13_FN50                (1 << 7)
+
+struct edd_device_params {
+	__u16 length;
+	__u16 info_flags;
+	__u32 num_default_cylinders;
+	__u32 num_default_heads;
+	__u32 sectors_per_track;
+	__u64 number_of_sectors;
+	__u16 bytes_per_sector;
+	__u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
+	__u16 key;		/* = 0xBEDD */
+	__u8 device_path_info_length;	/* = 44 */
+	__u8 reserved2;
+	__u16 reserved3;
+	__u8 host_bus_type[4];
+	__u8 interface_type[8];
+	union {
+		struct {
+			__u16 base_address;
+			__u16 reserved1;
+			__u32 reserved2;
+		} __attribute__ ((packed)) isa;
+		struct {
+			__u8 bus;
+			__u8 slot;
+			__u8 function;
+			__u8 channel;
+			__u32 reserved;
+		} __attribute__ ((packed)) pci;
+		/* pcix is same as pci */
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) ibnd;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) xprs;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) htpt;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) unknown;
+	} interface_path;
+	union {
+		struct {
+			__u8 device;
+			__u8 reserved1;
+			__u16 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) ata;
+		struct {
+			__u8 device;
+			__u8 lun;
+			__u8 reserved1;
+			__u8 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) atapi;
+		struct {
+			__u16 id;
+			__u64 lun;
+			__u16 reserved1;
+			__u32 reserved2;
+		} __attribute__ ((packed)) scsi;
+		struct {
+			__u64 serial_number;
+			__u64 reserved;
+		} __attribute__ ((packed)) usb;
+		struct {
+			__u64 eui;
+			__u64 reserved;
+		} __attribute__ ((packed)) i1394;
+		struct {
+			__u64 wwid;
+			__u64 lun;
+		} __attribute__ ((packed)) fibre;
+		struct {
+			__u64 identity_tag;
+			__u64 reserved;
+		} __attribute__ ((packed)) i2o;
+		struct {
+			__u32 array_number;
+			__u32 reserved1;
+			__u64 reserved2;
+		} __attribute__ ((packed)) raid;
+		struct {
+			__u8 device;
+			__u8 reserved1;
+			__u16 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) sata;
+		struct {
+			__u64 reserved1;
+			__u64 reserved2;
+		} __attribute__ ((packed)) unknown;
+	} device_path;
+	__u8 reserved4;
+	__u8 checksum;
+} __attribute__ ((packed));
+
+struct edd_info {
+	__u8 device;
+	__u8 version;
+	__u16 interface_support;
+	__u16 legacy_max_cylinder;
+	__u8 legacy_max_head;
+	__u8 legacy_sectors_per_track;
+	struct edd_device_params params;
+} __attribute__ ((packed));
+
+struct edd {
+	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
+	struct edd_info edd_info[EDDMAXNR];
+	unsigned char mbr_signature_nr;
+	unsigned char edd_info_nr;
+};
+
+#endif				/*!__ASSEMBLY__ */
+
+#endif /* _UAPI_LINUX_EDD_H */
diff --git a/include/linux/efs_fs_sb.h b/include/uapi/linux/efs_fs_sb.h
similarity index 100%
rename from include/linux/efs_fs_sb.h
rename to include/uapi/linux/efs_fs_sb.h
diff --git a/include/linux/elf-em.h b/include/uapi/linux/elf-em.h
similarity index 100%
rename from include/linux/elf-em.h
rename to include/uapi/linux/elf-em.h
diff --git a/include/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h
similarity index 99%
rename from include/linux/elf-fdpic.h
rename to include/uapi/linux/elf-fdpic.h
index 7cd2e80cebc8d4ae3f68ac339a8cb58c6a2eb1a2..1065078938f9f144e7c206301da7f87c24458b11 100644
--- a/include/linux/elf-fdpic.h
+++ b/include/uapi/linux/elf-fdpic.h
@@ -31,6 +31,7 @@ struct elf32_fdpic_loadmap {
 
 #define ELF32_FDPIC_LOADMAP_VERSION	0x0000
 
+#ifndef __KERNEL__
 /*
  * binfmt binary parameters structure
  */
@@ -58,7 +59,6 @@ struct elf_fdpic_params {
 #define ELF_FDPIC_FLAG_PRESENT		0x80000000	/* T if this object is present */
 };
 
-#ifdef __KERNEL__
 #ifdef CONFIG_MMU
 extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
 				      struct elf_fdpic_params *interp_params,
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
new file mode 100644
index 0000000000000000000000000000000000000000..126a8175e3e27160599365d98c9d26ef10ab730c
--- /dev/null
+++ b/include/uapi/linux/elf.h
@@ -0,0 +1,414 @@
+#ifndef _UAPI_LINUX_ELF_H
+#define _UAPI_LINUX_ELF_H
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+
+/* 32-bit ELF base types. */
+typedef __u32	Elf32_Addr;
+typedef __u16	Elf32_Half;
+typedef __u32	Elf32_Off;
+typedef __s32	Elf32_Sword;
+typedef __u32	Elf32_Word;
+
+/* 64-bit ELF base types. */
+typedef __u64	Elf64_Addr;
+typedef __u16	Elf64_Half;
+typedef __s16	Elf64_SHalf;
+typedef __u64	Elf64_Off;
+typedef __s32	Elf64_Sword;
+typedef __u32	Elf64_Word;
+typedef __u64	Elf64_Xword;
+typedef __s64	Elf64_Sxword;
+
+/* These constants are for the segment types stored in the image headers */
+#define PT_NULL    0
+#define PT_LOAD    1
+#define PT_DYNAMIC 2
+#define PT_INTERP  3
+#define PT_NOTE    4
+#define PT_SHLIB   5
+#define PT_PHDR    6
+#define PT_TLS     7               /* Thread local storage segment */
+#define PT_LOOS    0x60000000      /* OS-specific */
+#define PT_HIOS    0x6fffffff      /* OS-specific */
+#define PT_LOPROC  0x70000000
+#define PT_HIPROC  0x7fffffff
+#define PT_GNU_EH_FRAME		0x6474e550
+
+#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
+
+/*
+ * Extended Numbering
+ *
+ * If the real number of program header table entries is larger than
+ * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
+ * section header at index 0, and PN_XNUM is set to e_phnum
+ * field. Otherwise, the section header at index 0 is zero
+ * initialized, if it exists.
+ *
+ * Specifications are available in:
+ *
+ * - Sun microsystems: Linker and Libraries.
+ *   Part No: 817-1984-17, September 2008.
+ *   URL: http://docs.sun.com/app/docs/doc/817-1984
+ *
+ * - System V ABI AMD64 Architecture Processor Supplement
+ *   Draft Version 0.99.,
+ *   May 11, 2009.
+ *   URL: http://www.x86-64.org/
+ */
+#define PN_XNUM 0xffff
+
+/* These constants define the different elf file types */
+#define ET_NONE   0
+#define ET_REL    1
+#define ET_EXEC   2
+#define ET_DYN    3
+#define ET_CORE   4
+#define ET_LOPROC 0xff00
+#define ET_HIPROC 0xffff
+
+/* This is the info that is needed to parse the dynamic section of the file */
+#define DT_NULL		0
+#define DT_NEEDED	1
+#define DT_PLTRELSZ	2
+#define DT_PLTGOT	3
+#define DT_HASH		4
+#define DT_STRTAB	5
+#define DT_SYMTAB	6
+#define DT_RELA		7
+#define DT_RELASZ	8
+#define DT_RELAENT	9
+#define DT_STRSZ	10
+#define DT_SYMENT	11
+#define DT_INIT		12
+#define DT_FINI		13
+#define DT_SONAME	14
+#define DT_RPATH 	15
+#define DT_SYMBOLIC	16
+#define DT_REL	        17
+#define DT_RELSZ	18
+#define DT_RELENT	19
+#define DT_PLTREL	20
+#define DT_DEBUG	21
+#define DT_TEXTREL	22
+#define DT_JMPREL	23
+#define DT_ENCODING	32
+#define OLD_DT_LOOS	0x60000000
+#define DT_LOOS		0x6000000d
+#define DT_HIOS		0x6ffff000
+#define DT_VALRNGLO	0x6ffffd00
+#define DT_VALRNGHI	0x6ffffdff
+#define DT_ADDRRNGLO	0x6ffffe00
+#define DT_ADDRRNGHI	0x6ffffeff
+#define DT_VERSYM	0x6ffffff0
+#define DT_RELACOUNT	0x6ffffff9
+#define DT_RELCOUNT	0x6ffffffa
+#define DT_FLAGS_1	0x6ffffffb
+#define DT_VERDEF	0x6ffffffc
+#define	DT_VERDEFNUM	0x6ffffffd
+#define DT_VERNEED	0x6ffffffe
+#define	DT_VERNEEDNUM	0x6fffffff
+#define OLD_DT_HIOS     0x6fffffff
+#define DT_LOPROC	0x70000000
+#define DT_HIPROC	0x7fffffff
+
+/* This info is needed when parsing the symbol table */
+#define STB_LOCAL  0
+#define STB_GLOBAL 1
+#define STB_WEAK   2
+
+#define STT_NOTYPE  0
+#define STT_OBJECT  1
+#define STT_FUNC    2
+#define STT_SECTION 3
+#define STT_FILE    4
+#define STT_COMMON  5
+#define STT_TLS     6
+
+#define ELF_ST_BIND(x)		((x) >> 4)
+#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
+#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
+#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
+
+typedef struct dynamic{
+  Elf32_Sword d_tag;
+  union{
+    Elf32_Sword	d_val;
+    Elf32_Addr	d_ptr;
+  } d_un;
+} Elf32_Dyn;
+
+typedef struct {
+  Elf64_Sxword d_tag;		/* entry tag value */
+  union {
+    Elf64_Xword d_val;
+    Elf64_Addr d_ptr;
+  } d_un;
+} Elf64_Dyn;
+
+/* The following are used with relocations */
+#define ELF32_R_SYM(x) ((x) >> 8)
+#define ELF32_R_TYPE(x) ((x) & 0xff)
+
+#define ELF64_R_SYM(i)			((i) >> 32)
+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
+
+typedef struct elf32_rel {
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+} Elf32_Rel;
+
+typedef struct elf64_rel {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+} Elf64_Rel;
+
+typedef struct elf32_rela{
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+  Elf32_Sword	r_addend;
+} Elf32_Rela;
+
+typedef struct elf64_rela {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
+} Elf64_Rela;
+
+typedef struct elf32_sym{
+  Elf32_Word	st_name;
+  Elf32_Addr	st_value;
+  Elf32_Word	st_size;
+  unsigned char	st_info;
+  unsigned char	st_other;
+  Elf32_Half	st_shndx;
+} Elf32_Sym;
+
+typedef struct elf64_sym {
+  Elf64_Word st_name;		/* Symbol name, index in string tbl */
+  unsigned char	st_info;	/* Type and binding attributes */
+  unsigned char	st_other;	/* No defined meaning, 0 */
+  Elf64_Half st_shndx;		/* Associated section index */
+  Elf64_Addr st_value;		/* Value of the symbol */
+  Elf64_Xword st_size;		/* Associated symbol size */
+} Elf64_Sym;
+
+
+#define EI_NIDENT	16
+
+typedef struct elf32_hdr{
+  unsigned char	e_ident[EI_NIDENT];
+  Elf32_Half	e_type;
+  Elf32_Half	e_machine;
+  Elf32_Word	e_version;
+  Elf32_Addr	e_entry;  /* Entry point */
+  Elf32_Off	e_phoff;
+  Elf32_Off	e_shoff;
+  Elf32_Word	e_flags;
+  Elf32_Half	e_ehsize;
+  Elf32_Half	e_phentsize;
+  Elf32_Half	e_phnum;
+  Elf32_Half	e_shentsize;
+  Elf32_Half	e_shnum;
+  Elf32_Half	e_shstrndx;
+} Elf32_Ehdr;
+
+typedef struct elf64_hdr {
+  unsigned char	e_ident[EI_NIDENT];	/* ELF "magic number" */
+  Elf64_Half e_type;
+  Elf64_Half e_machine;
+  Elf64_Word e_version;
+  Elf64_Addr e_entry;		/* Entry point virtual address */
+  Elf64_Off e_phoff;		/* Program header table file offset */
+  Elf64_Off e_shoff;		/* Section header table file offset */
+  Elf64_Word e_flags;
+  Elf64_Half e_ehsize;
+  Elf64_Half e_phentsize;
+  Elf64_Half e_phnum;
+  Elf64_Half e_shentsize;
+  Elf64_Half e_shnum;
+  Elf64_Half e_shstrndx;
+} Elf64_Ehdr;
+
+/* These constants define the permissions on sections in the program
+   header, p_flags. */
+#define PF_R		0x4
+#define PF_W		0x2
+#define PF_X		0x1
+
+typedef struct elf32_phdr{
+  Elf32_Word	p_type;
+  Elf32_Off	p_offset;
+  Elf32_Addr	p_vaddr;
+  Elf32_Addr	p_paddr;
+  Elf32_Word	p_filesz;
+  Elf32_Word	p_memsz;
+  Elf32_Word	p_flags;
+  Elf32_Word	p_align;
+} Elf32_Phdr;
+
+typedef struct elf64_phdr {
+  Elf64_Word p_type;
+  Elf64_Word p_flags;
+  Elf64_Off p_offset;		/* Segment file offset */
+  Elf64_Addr p_vaddr;		/* Segment virtual address */
+  Elf64_Addr p_paddr;		/* Segment physical address */
+  Elf64_Xword p_filesz;		/* Segment size in file */
+  Elf64_Xword p_memsz;		/* Segment size in memory */
+  Elf64_Xword p_align;		/* Segment alignment, file & memory */
+} Elf64_Phdr;
+
+/* sh_type */
+#define SHT_NULL	0
+#define SHT_PROGBITS	1
+#define SHT_SYMTAB	2
+#define SHT_STRTAB	3
+#define SHT_RELA	4
+#define SHT_HASH	5
+#define SHT_DYNAMIC	6
+#define SHT_NOTE	7
+#define SHT_NOBITS	8
+#define SHT_REL		9
+#define SHT_SHLIB	10
+#define SHT_DYNSYM	11
+#define SHT_NUM		12
+#define SHT_LOPROC	0x70000000
+#define SHT_HIPROC	0x7fffffff
+#define SHT_LOUSER	0x80000000
+#define SHT_HIUSER	0xffffffff
+
+/* sh_flags */
+#define SHF_WRITE	0x1
+#define SHF_ALLOC	0x2
+#define SHF_EXECINSTR	0x4
+#define SHF_MASKPROC	0xf0000000
+
+/* special section indexes */
+#define SHN_UNDEF	0
+#define SHN_LORESERVE	0xff00
+#define SHN_LOPROC	0xff00
+#define SHN_HIPROC	0xff1f
+#define SHN_ABS		0xfff1
+#define SHN_COMMON	0xfff2
+#define SHN_HIRESERVE	0xffff
+ 
+typedef struct elf32_shdr {
+  Elf32_Word	sh_name;
+  Elf32_Word	sh_type;
+  Elf32_Word	sh_flags;
+  Elf32_Addr	sh_addr;
+  Elf32_Off	sh_offset;
+  Elf32_Word	sh_size;
+  Elf32_Word	sh_link;
+  Elf32_Word	sh_info;
+  Elf32_Word	sh_addralign;
+  Elf32_Word	sh_entsize;
+} Elf32_Shdr;
+
+typedef struct elf64_shdr {
+  Elf64_Word sh_name;		/* Section name, index in string tbl */
+  Elf64_Word sh_type;		/* Type of section */
+  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
+  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
+  Elf64_Off sh_offset;		/* Section file offset */
+  Elf64_Xword sh_size;		/* Size of section in bytes */
+  Elf64_Word sh_link;		/* Index of another section */
+  Elf64_Word sh_info;		/* Additional section information */
+  Elf64_Xword sh_addralign;	/* Section alignment */
+  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
+} Elf64_Shdr;
+
+#define	EI_MAG0		0		/* e_ident[] indexes */
+#define	EI_MAG1		1
+#define	EI_MAG2		2
+#define	EI_MAG3		3
+#define	EI_CLASS	4
+#define	EI_DATA		5
+#define	EI_VERSION	6
+#define	EI_OSABI	7
+#define	EI_PAD		8
+
+#define	ELFMAG0		0x7f		/* EI_MAG */
+#define	ELFMAG1		'E'
+#define	ELFMAG2		'L'
+#define	ELFMAG3		'F'
+#define	ELFMAG		"\177ELF"
+#define	SELFMAG		4
+
+#define	ELFCLASSNONE	0		/* EI_CLASS */
+#define	ELFCLASS32	1
+#define	ELFCLASS64	2
+#define	ELFCLASSNUM	3
+
+#define ELFDATANONE	0		/* e_ident[EI_DATA] */
+#define ELFDATA2LSB	1
+#define ELFDATA2MSB	2
+
+#define EV_NONE		0		/* e_version, EI_VERSION */
+#define EV_CURRENT	1
+#define EV_NUM		2
+
+#define ELFOSABI_NONE	0
+#define ELFOSABI_LINUX	3
+
+#ifndef ELF_OSABI
+#define ELF_OSABI ELFOSABI_NONE
+#endif
+
+/*
+ * Notes used in ET_CORE. Architectures export some of the arch register sets
+ * using the corresponding note types via the PTRACE_GETREGSET and
+ * PTRACE_SETREGSET requests.
+ */
+#define NT_PRSTATUS	1
+#define NT_PRFPREG	2
+#define NT_PRPSINFO	3
+#define NT_TASKSTRUCT	4
+#define NT_AUXV		6
+/*
+ * Note to userspace developers: size of NT_SIGINFO note may increase
+ * in the future to accomodate more fields, don't assume it is fixed!
+ */
+#define NT_SIGINFO      0x53494749
+#define NT_FILE         0x46494c45
+#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
+#define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
+#define NT_S390_TIMER	0x301		/* s390 timer register */
+#define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
+#define NT_S390_TODPREG	0x303		/* s390 TOD programmable register */
+#define NT_S390_CTRS	0x304		/* s390 control registers */
+#define NT_S390_PREFIX	0x305		/* s390 prefix register */
+#define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
+#define NT_S390_SYSTEM_CALL	0x307	/* s390 system call restart data */
+#define NT_S390_TDB	0x308		/* s390 transaction diagnostic block */
+#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
+#define NT_ARM_TLS	0x401		/* ARM TLS register */
+#define NT_ARM_HW_BREAK	0x402		/* ARM hardware breakpoint registers */
+#define NT_ARM_HW_WATCH	0x403		/* ARM hardware watchpoint registers */
+
+
+/* Note header in a PT_NOTE section */
+typedef struct elf32_note {
+  Elf32_Word	n_namesz;	/* Name size */
+  Elf32_Word	n_descsz;	/* Content size */
+  Elf32_Word	n_type;		/* Content type */
+} Elf32_Nhdr;
+
+/* Note header in a PT_NOTE section */
+typedef struct elf64_note {
+  Elf64_Word n_namesz;	/* Name size */
+  Elf64_Word n_descsz;	/* Content size */
+  Elf64_Word n_type;	/* Content type */
+} Elf64_Nhdr;
+
+#endif /* _UAPI_LINUX_ELF_H */
diff --git a/include/uapi/linux/elfcore.h b/include/uapi/linux/elfcore.h
new file mode 100644
index 0000000000000000000000000000000000000000..569737cfb55737ee7e63ad3c0088a911f0676616
--- /dev/null
+++ b/include/uapi/linux/elfcore.h
@@ -0,0 +1,100 @@
+#ifndef _UAPI_LINUX_ELFCORE_H
+#define _UAPI_LINUX_ELFCORE_H
+
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <linux/time.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/fs.h>
+
+struct elf_siginfo
+{
+	int	si_signo;			/* signal number */
+	int	si_code;			/* extra code */
+	int	si_errno;			/* errno */
+};
+
+
+#ifndef __KERNEL__
+typedef elf_greg_t greg_t;
+typedef elf_gregset_t gregset_t;
+typedef elf_fpregset_t fpregset_t;
+typedef elf_fpxregset_t fpxregset_t;
+#define NGREG ELF_NGREG
+#endif
+
+/*
+ * Definitions to generate Intel SVR4-like core files.
+ * These mostly have the same names as the SVR4 types with "elf_"
+ * tacked on the front to prevent clashes with linux definitions,
+ * and the typedef forms have been avoided.  This is mostly like
+ * the SVR4 structure, but more Linuxy, with things that Linux does
+ * not support and which gdb doesn't really use excluded.
+ * Fields present but not used are marked with "XXX".
+ */
+struct elf_prstatus
+{
+#if 0
+	long	pr_flags;	/* XXX Process flags */
+	short	pr_why;		/* XXX Reason for process halt */
+	short	pr_what;	/* XXX More detailed reason */
+#endif
+	struct elf_siginfo pr_info;	/* Info associated with signal */
+	short	pr_cursig;		/* Current signal */
+	unsigned long pr_sigpend;	/* Set of pending signals */
+	unsigned long pr_sighold;	/* Set of held signals */
+#if 0
+	struct sigaltstack pr_altstack;	/* Alternate stack info */
+	struct sigaction pr_action;	/* Signal action for current sig */
+#endif
+	pid_t	pr_pid;
+	pid_t	pr_ppid;
+	pid_t	pr_pgrp;
+	pid_t	pr_sid;
+	struct timeval pr_utime;	/* User time */
+	struct timeval pr_stime;	/* System time */
+	struct timeval pr_cutime;	/* Cumulative user time */
+	struct timeval pr_cstime;	/* Cumulative system time */
+#if 0
+	long	pr_instr;		/* Current instruction */
+#endif
+	elf_gregset_t pr_reg;	/* GP registers */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	/* When using FDPIC, the loadmap addresses need to be communicated
+	 * to GDB in order for GDB to do the necessary relocations.  The
+	 * fields (below) used to communicate this information are placed
+	 * immediately after ``pr_reg'', so that the loadmap addresses may
+	 * be viewed as part of the register set if so desired.
+	 */
+	unsigned long pr_exec_fdpic_loadmap;
+	unsigned long pr_interp_fdpic_loadmap;
+#endif
+	int pr_fpvalid;		/* True if math co-processor being used.  */
+};
+
+#define ELF_PRARGSZ	(80)	/* Number of chars for args */
+
+struct elf_prpsinfo
+{
+	char	pr_state;	/* numeric process state */
+	char	pr_sname;	/* char for pr_state */
+	char	pr_zomb;	/* zombie */
+	char	pr_nice;	/* nice val */
+	unsigned long pr_flag;	/* flags */
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
+	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	/* Lots missing */
+	char	pr_fname[16];	/* filename of executable */
+	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
+};
+
+#ifndef __KERNEL__
+typedef struct elf_prstatus prstatus_t;
+typedef struct elf_prpsinfo prpsinfo_t;
+#define PRARGSZ ELF_PRARGSZ 
+#endif
+
+
+#endif /* _UAPI_LINUX_ELFCORE_H */
diff --git a/include/uapi/linux/errno.h b/include/uapi/linux/errno.h
new file mode 100644
index 0000000000000000000000000000000000000000..70f2bd34e3354bc551ae6d0481f752c642ad6a40
--- /dev/null
+++ b/include/uapi/linux/errno.h
@@ -0,0 +1 @@
+#include <asm/errno.h>
diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h
new file mode 100644
index 0000000000000000000000000000000000000000..aacd4fb7102a1c8d63c71d75775b7fddd19a9a91
--- /dev/null
+++ b/include/uapi/linux/errqueue.h
@@ -0,0 +1,26 @@
+#ifndef _UAPI_LINUX_ERRQUEUE_H
+#define _UAPI_LINUX_ERRQUEUE_H
+
+#include <linux/types.h>
+
+struct sock_extended_err {
+	__u32	ee_errno;	
+	__u8	ee_origin;
+	__u8	ee_type;
+	__u8	ee_code;
+	__u8	ee_pad;
+	__u32   ee_info;
+	__u32   ee_data;
+};
+
+#define SO_EE_ORIGIN_NONE	0
+#define SO_EE_ORIGIN_LOCAL	1
+#define SO_EE_ORIGIN_ICMP	2
+#define SO_EE_ORIGIN_ICMP6	3
+#define SO_EE_ORIGIN_TXSTATUS	4
+#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
+
+#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
+
+
+#endif /* _UAPI_LINUX_ERRQUEUE_H */
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
new file mode 100644
index 0000000000000000000000000000000000000000..d3eaaaf1009e6a42618351b8f2844fa75d4f8e66
--- /dev/null
+++ b/include/uapi/linux/ethtool.h
@@ -0,0 +1,1085 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _UAPI_LINUX_ETHTOOL_H
+#define _UAPI_LINUX_ETHTOOL_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+	__u32	cmd;
+	__u32	supported;	/* Features this interface supports */
+	__u32	advertising;	/* Features this interface advertises */
+	__u16	speed;	        /* The forced speed (lower bits) in
+				 * Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
+	__u8	duplex;		/* Duplex, half or full */
+	__u8	port;		/* Which connector port */
+	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
+				 * May be read-only or read-write
+				 * depending on the driver.
+				 */
+	__u8	transceiver;	/* Which transceiver to use */
+	__u8	autoneg;	/* Enable or disable autonegotiation */
+	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
+				 * Not set by all drivers.
+				 */
+	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
+	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
+	__u16	speed_hi;       /* The forced speed (upper
+				 * bits) in Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
+	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
+	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
+				   * link should be renegotiated if necessary
+				   */
+	__u32	lp_advertising;	/* Features the link partner advertises */
+	__u32	reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+					 __u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>.  This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22	1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45	2
+
+#define ETHTOOL_FWVERS_LEN	32
+#define ETHTOOL_BUSINFO_LEN	32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+	__u32	cmd;
+	char	driver[32];	/* driver short name, "tulip", "eepro100" */
+	char	version[32];	/* driver version string */
+	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
+	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
+				/* For PCI devices, use pci_name(pci_dev). */
+	char	reserved1[32];
+	char	reserved2[12];
+				/*
+				 * Some struct members below are filled in
+				 * using ops->get_sset_count().  Obtaining
+				 * this info from ethtool_drvinfo is now
+				 * deprecated; Use ETHTOOL_GSSET_INFO
+				 * instead.
+				 */
+	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
+	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
+	__u32	testinfo_len;
+	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
+	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX	6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+	__u32	cmd;
+	__u32	supported;
+	__u32	wolopts;
+	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+	__u32	cmd;
+	__u32	data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+	__u32	cmd;
+	__u32	version; /* driver-specific, indicates different chips/revs */
+	__u32	len; /* bytes */
+	__u8	data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+	__u32	cmd;
+	__u32	magic;
+	__u32	offset; /* in bytes */
+	__u32	len; /* in bytes */
+	__u8	data[0];
+};
+
+/**
+ * struct ethtool_eee - Energy Efficient Ethernet information
+ * @cmd: ETHTOOL_{G,S}EEE
+ * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
+ *	for which there is EEE support.
+ * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
+ *	advertised as eee capable.
+ * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
+ *	combinations advertised by the link partner as eee capable.
+ * @eee_active: Result of the eee auto negotiation.
+ * @eee_enabled: EEE configured mode (enabled/disabled).
+ * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
+ *	that eee was negotiated.
+ * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
+ *	its tx lpi (after reaching 'idle' state). Effective only when eee
+ *	was negotiated and tx_lpi_enabled was set.
+ */
+struct ethtool_eee {
+	__u32	cmd;
+	__u32	supported;
+	__u32	advertised;
+	__u32	lp_advertised;
+	__u32	eee_active;
+	__u32	eee_enabled;
+	__u32	tx_lpi_enabled;
+	__u32	tx_lpi_timer;
+	__u32	reserved[2];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+	__u32   cmd;
+	__u32   type;
+	__u32   eeprom_len;
+	__u32   reserved[8];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ *	a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ *	before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ *	a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ *	before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ *	statistics block updates.  Some drivers do not have an
+ *	in-memory statistic block, and in such cases this value is
+ *	ignored.  This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ *	a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ *	a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ *	sampling, measured in seconds.  Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies this exit
+ * condition for interrupt coalescing:
+ *	(usecs > 0 && time_since_first_completion >= usecs) ||
+ *	(max_frames > 0 && completed_frames >= max_frames)
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated.  To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition:
+ *	time_since_first_completion >= usecs
+ * This is deprecated.  Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates.  Some drivers only implement
+ * one of RX or TX adaptive coalescing.  Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+	__u32	cmd;
+	__u32	rx_coalesce_usecs;
+	__u32	rx_max_coalesced_frames;
+	__u32	rx_coalesce_usecs_irq;
+	__u32	rx_max_coalesced_frames_irq;
+	__u32	tx_coalesce_usecs;
+	__u32	tx_max_coalesced_frames;
+	__u32	tx_coalesce_usecs_irq;
+	__u32	tx_max_coalesced_frames_irq;
+	__u32	stats_block_coalesce_usecs;
+	__u32	use_adaptive_rx_coalesce;
+	__u32	use_adaptive_tx_coalesce;
+	__u32	pkt_rate_low;
+	__u32	rx_coalesce_usecs_low;
+	__u32	rx_max_coalesced_frames_low;
+	__u32	tx_coalesce_usecs_low;
+	__u32	tx_max_coalesced_frames_low;
+	__u32	pkt_rate_high;
+	__u32	rx_coalesce_usecs_high;
+	__u32	rx_max_coalesced_frames_high;
+	__u32	tx_coalesce_usecs_high;
+	__u32	tx_max_coalesced_frames_high;
+	__u32	rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
+
+	/* Read only attributes.  These indicate the maximum number
+	 * of pending RX/TX ring entries the driver will allow the
+	 * user to set.
+	 */
+	__u32	rx_max_pending;
+	__u32	rx_mini_max_pending;
+	__u32	rx_jumbo_max_pending;
+	__u32	tx_max_pending;
+
+	/* Values changeable by the user.  The valid values are
+	 * in the range 1 to the "*_max_pending" counterpart above.
+	 */
+	__u32	rx_pending;
+	__u32	rx_mini_pending;
+	__u32	rx_jumbo_pending;
+	__u32	tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ *	support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+	__u32	cmd;
+	__u32	max_rx;
+	__u32	max_tx;
+	__u32	max_other;
+	__u32	max_combined;
+	__u32	rx_count;
+	__u32	tx_count;
+	__u32	other_count;
+	__u32	combined_count;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
+
+	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+	 * being true) the user may set 'autoneg' here non-zero to have the
+	 * pause parameters be auto-negotiated too.  In such a case, the
+	 * {rx,tx}_pause values below determine what capabilities are
+	 * advertised.
+	 *
+	 * If 'autoneg' is zero or the link is not being auto-negotiated,
+	 * then {rx,tx}_pause force the driver to use/not-use pause
+	 * flow control.
+	 */
+	__u32	autoneg;
+	__u32	rx_pause;
+	__u32	tx_pause;
+};
+
+#define ETH_GSTRING_LEN		32
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
+	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
+	ETH_SS_FEATURES,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+	__u32	cmd;		/* ETHTOOL_GSTRINGS */
+	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
+	__u32	len;		/* number of strings in the string set */
+	__u8	data[0];
+};
+
+struct ethtool_sset_info {
+	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
+	__u32	reserved;
+	__u64	sset_mask;	/* input: each bit selects an sset to query */
+				/* output: each bit a returned sset */
+	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
+				   in sset_mask.  One bit implies one
+				   __u32, two bits implies two
+				   __u32's, etc. */
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ *	only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ *	test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),
+	ETH_TEST_FL_FAILED	= (1 << 1),
+	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
+	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+	__u32	cmd;		/* ETHTOOL_TEST */
+	__u32	flags;		/* ETH_TEST_FL_xxx */
+	__u32	reserved;
+	__u32	len;		/* result length, in number of u64 elements */
+	__u64	data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+	__u32	cmd;		/* ETHTOOL_GSTATS */
+	__u32	n_stats;	/* number of u64's being returned */
+	__u64	data[0];
+};
+
+struct ethtool_perm_addr {
+	__u32	cmd;		/* ETHTOOL_GPERMADDR */
+	__u32	size;
+	__u8	data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
+	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
+	ETH_FLAG_RXHASH		= (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	spi;
+	__u8    tos;
+};
+
+#define	ETH_RX_NFC_IP4	1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	l4_4_bytes;
+	__u8    tos;
+	__u8    ip_ver;
+	__u8    proto;
+};
+
+union ethtool_flow_union {
+	struct ethtool_tcpip4_spec		tcp_ip4_spec;
+	struct ethtool_tcpip4_spec		udp_ip4_spec;
+	struct ethtool_tcpip4_spec		sctp_ip4_spec;
+	struct ethtool_ah_espip4_spec		ah_ip4_spec;
+	struct ethtool_ah_espip4_spec		esp_ip4_spec;
+	struct ethtool_usrip4_spec		usr_ip4_spec;
+	struct ethhdr				ether_spec;
+	__u8					hdata[60];
+};
+
+struct ethtool_flow_ext {
+	__be16	vlan_etype;
+	__be16	vlan_tci;
+	__be32	data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ *	Note, all additional fields must be ignored unless @flow_type
+ *	includes the %FLOW_EXT flag.
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ *	if packets should be discarded
+ * @location: Location of rule in the table.  Locations must be
+ *	numbered such that a flow matching multiple rules will be
+ *	classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+	__u32		flow_type;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
+	__u64		ring_cookie;
+	__u32		location;
+};
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return.  If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values.  If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry.  On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules.  Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
+ * @fs.@location is the actual rule location.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows.  The special
+ * values are: %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority).  Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+	__u32				cmd;
+	__u32				flow_type;
+	__u64				data;
+	struct ethtool_rx_flow_spec	fs;
+	__u32				rule_cnt;
+	__u32				rule_locs[0];
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ *	indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values.  This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+	__u32	cmd;
+	__u32	size;
+	__u32	ring_index[0];
+};
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+	__u32		 flow_type;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		struct ethhdr				ether_spec;
+		__u8					hdata[72];
+	} h_u, m_u;
+
+	__u16	        vlan_tag;
+	__u16	        vlan_tag_mask;
+	__u64		data;
+	__u64		data_mask;
+
+	__s32		action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+	__u32					cmd;
+	struct ethtool_rx_ntuple_flow_spec	fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME	128
+enum ethtool_flash_op_type {
+	ETHTOOL_FLASH_ALL_REGIONS	= 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+	__u32	cmd;
+	__u32	region;
+	char	data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * 	%ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ *        get and filled in by ethtool for set operation.
+ *        flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
+ *        firmware dump is disabled.
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * 	 for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+
+#define ETH_FW_DUMP_DISABLE 0
+
+struct ethtool_dump {
+	__u32	cmd;
+	__u32	version;
+	__u32	flag;
+	__u32	len;
+	__u8	data[0];
+};
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+	__u32	available;
+	__u32	requested;
+	__u32	active;
+	__u32	never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: in: number of elements in the features[] array;
+ *       out: number of elements in features[] needed to hold all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+	__u32	valid;
+	__u32	requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_set_features_block features[0];
+};
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ */
+struct ethtool_ts_info {
+	__u32	cmd;
+	__u32	so_timestamping;
+	__s32	phc_index;
+	__u32	tx_types;
+	__u32	tx_reserved[3];
+	__u32	rx_filters;
+	__u32	rx_reserved[3];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ *	those bits were ignored.
+ *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ *      resulting state of bits masked by .valid is not equal to .requested.
+ *      Probably there are other device-specific constraints on some features
+ *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ *      here as though ignored bits were cleared.
+ *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ *      compatibility functions. Requested offload state cannot be properly
+ *      managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+	ETHTOOL_F_UNSUPPORTED__BIT,
+	ETHTOOL_F_WISH__BIT,
+	ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
+
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* Get settings. */
+#define ETHTOOL_SSET		0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK		0x0000000a
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO	0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM	0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE		0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE		0x00000045 /* Set EEE settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half		(1 << 0)
+#define SUPPORTED_10baseT_Full		(1 << 1)
+#define SUPPORTED_100baseT_Half		(1 << 2)
+#define SUPPORTED_100baseT_Full		(1 << 3)
+#define SUPPORTED_1000baseT_Half	(1 << 4)
+#define SUPPORTED_1000baseT_Full	(1 << 5)
+#define SUPPORTED_Autoneg		(1 << 6)
+#define SUPPORTED_TP			(1 << 7)
+#define SUPPORTED_AUI			(1 << 8)
+#define SUPPORTED_MII			(1 << 9)
+#define SUPPORTED_FIBRE			(1 << 10)
+#define SUPPORTED_BNC			(1 << 11)
+#define SUPPORTED_10000baseT_Full	(1 << 12)
+#define SUPPORTED_Pause			(1 << 13)
+#define SUPPORTED_Asym_Pause		(1 << 14)
+#define SUPPORTED_2500baseX_Full	(1 << 15)
+#define SUPPORTED_Backplane		(1 << 16)
+#define SUPPORTED_1000baseKX_Full	(1 << 17)
+#define SUPPORTED_10000baseKX4_Full	(1 << 18)
+#define SUPPORTED_10000baseKR_Full	(1 << 19)
+#define SUPPORTED_10000baseR_FEC	(1 << 20)
+#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
+#define SUPPORTED_20000baseKR2_Full	(1 << 22)
+#define SUPPORTED_40000baseKR4_Full	(1 << 23)
+#define SUPPORTED_40000baseCR4_Full	(1 << 24)
+#define SUPPORTED_40000baseSR4_Full	(1 << 25)
+#define SUPPORTED_40000baseLR4_Full	(1 << 26)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half		(1 << 0)
+#define ADVERTISED_10baseT_Full		(1 << 1)
+#define ADVERTISED_100baseT_Half	(1 << 2)
+#define ADVERTISED_100baseT_Full	(1 << 3)
+#define ADVERTISED_1000baseT_Half	(1 << 4)
+#define ADVERTISED_1000baseT_Full	(1 << 5)
+#define ADVERTISED_Autoneg		(1 << 6)
+#define ADVERTISED_TP			(1 << 7)
+#define ADVERTISED_AUI			(1 << 8)
+#define ADVERTISED_MII			(1 << 9)
+#define ADVERTISED_FIBRE		(1 << 10)
+#define ADVERTISED_BNC			(1 << 11)
+#define ADVERTISED_10000baseT_Full	(1 << 12)
+#define ADVERTISED_Pause		(1 << 13)
+#define ADVERTISED_Asym_Pause		(1 << 14)
+#define ADVERTISED_2500baseX_Full	(1 << 15)
+#define ADVERTISED_Backplane		(1 << 16)
+#define ADVERTISED_1000baseKX_Full	(1 << 17)
+#define ADVERTISED_10000baseKX4_Full	(1 << 18)
+#define ADVERTISED_10000baseKR_Full	(1 << 19)
+#define ADVERTISED_10000baseR_FEC	(1 << 20)
+#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
+#define ADVERTISED_20000baseKR2_Full	(1 << 22)
+#define ADVERTISED_40000baseKR4_Full	(1 << 23)
+#define ADVERTISED_40000baseCR4_Full	(1 << 24)
+#define ADVERTISED_40000baseSR4_Full	(1 << 25)
+#define ADVERTISED_40000baseLR4_Full	(1 << 26)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_2500		2500
+#define SPEED_10000		10000
+#define SPEED_UNKNOWN		-1
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+#define DUPLEX_UNKNOWN		0xff
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+#define PORT_DA			0x05
+#define PORT_NONE		0xef
+#define PORT_OTHER		0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00
+#define XCVR_EXTERNAL		0x01
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation.  If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
+#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
+#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
+#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
+#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
+#define	AH_ESP_V4_FLOW	0x04	/* hash only */
+#define	TCP_V6_FLOW	0x05	/* hash only */
+#define	UDP_V6_FLOW	0x06	/* hash only */
+#define	SCTP_V6_FLOW	0x07	/* hash only */
+#define	AH_ESP_V6_FLOW	0x08	/* hash only */
+#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
+#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
+#define	AH_V6_FLOW	0x0b	/* hash only */
+#define	ESP_V6_FLOW	0x0c	/* hash only */
+#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
+#define	IPV4_FLOW	0x10	/* hash only */
+#define	IPV6_FLOW	0x11	/* hash only */
+#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define	FLOW_EXT	0x80000000
+
+/* L3-L4 network traffic flow hash options */
+#define	RXH_L2DA	(1 << 1)
+#define	RXH_VLAN	(1 << 2)
+#define	RXH_L3_PROTO	(1 << 3)
+#define	RXH_IP_SRC	(1 << 4)
+#define	RXH_IP_DST	(1 << 5)
+#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_DISCARD	(1 << 31)
+
+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
+#define RX_CLS_LOC_ANY		0xffffffff
+#define RX_CLS_LOC_FIRST	0xfffffffe
+#define RX_CLS_LOC_LAST		0xfffffffd
+
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079		0x1
+#define ETH_MODULE_SFF_8079_LEN		256
+#define ETH_MODULE_SFF_8472		0x2
+#define ETH_MODULE_SFF_8472_LEN		512
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
+#endif /* _UAPI_LINUX_ETHTOOL_H */
diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h
new file mode 100644
index 0000000000000000000000000000000000000000..8c99ce7202c53bcd93887c93dd8d8e75ebcd8aa2
--- /dev/null
+++ b/include/uapi/linux/eventpoll.h
@@ -0,0 +1,66 @@
+/*
+ *  include/linux/eventpoll.h ( Efficient event polling implementation )
+ *  Copyright (C) 2001,...,2006	 Davide Libenzi
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _UAPI_LINUX_EVENTPOLL_H
+#define _UAPI_LINUX_EVENTPOLL_H
+
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/* Flags for epoll_create1.  */
+#define EPOLL_CLOEXEC O_CLOEXEC
+
+/* Valid opcodes to issue to sys_epoll_ctl() */
+#define EPOLL_CTL_ADD 1
+#define EPOLL_CTL_DEL 2
+#define EPOLL_CTL_MOD 3
+#define EPOLL_CTL_DISABLE 4
+
+/*
+ * Request the handling of system wakeup events so as to prevent system suspends
+ * from happening while those events are being processed.
+ *
+ * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
+ * re-allowed until epoll_wait is called again after consuming the wakeup
+ * event(s).
+ *
+ * Requires CAP_BLOCK_SUSPEND
+ */
+#define EPOLLWAKEUP (1 << 29)
+
+/* Set the One Shot behaviour for the target file descriptor */
+#define EPOLLONESHOT (1 << 30)
+
+/* Set the Edge Triggered behaviour for the target file descriptor */
+#define EPOLLET (1 << 31)
+
+/* 
+ * On x86-64 make the 64bit structure have the same alignment as the
+ * 32bit structure. This makes 32bit emulation easier.
+ *
+ * UML/x86_64 needs the same packing as x86_64
+ */
+#ifdef __x86_64__
+#define EPOLL_PACKED __attribute__((packed))
+#else
+#define EPOLL_PACKED
+#endif
+
+struct epoll_event {
+	__u32 events;
+	__u64 data;
+} EPOLL_PACKED;
+
+
+#endif /* _UAPI_LINUX_EVENTPOLL_H */
diff --git a/include/linux/fadvise.h b/include/uapi/linux/fadvise.h
similarity index 100%
rename from include/linux/fadvise.h
rename to include/uapi/linux/fadvise.h
diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h
new file mode 100644
index 0000000000000000000000000000000000000000..990c4ccf8b61d575a6db2a787896b027e4789698
--- /dev/null
+++ b/include/uapi/linux/falloc.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI_FALLOC_H_
+#define _UAPI_FALLOC_H_
+
+#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
+#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
+#define FALLOC_FL_NO_HIDE_STALE	0x04 /* reserved codepoint */
+
+
+#endif /* _UAPI_FALLOC_H_ */
diff --git a/include/uapi/linux/fanotify.h b/include/uapi/linux/fanotify.h
new file mode 100644
index 0000000000000000000000000000000000000000..030508d195d30556c22b329b1f2aad528ef76358
--- /dev/null
+++ b/include/uapi/linux/fanotify.h
@@ -0,0 +1,116 @@
+#ifndef _UAPI_LINUX_FANOTIFY_H
+#define _UAPI_LINUX_FANOTIFY_H
+
+#include <linux/types.h>
+
+/* the following events that user-space can register for */
+#define FAN_ACCESS		0x00000001	/* File was accessed */
+#define FAN_MODIFY		0x00000002	/* File was modified */
+#define FAN_CLOSE_WRITE		0x00000008	/* Writtable file closed */
+#define FAN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define FAN_OPEN		0x00000020	/* File was opened */
+
+#define FAN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+
+#define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
+#define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
+
+#define FAN_ONDIR		0x40000000	/* event occurred against dir */
+
+#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
+
+/* helper events */
+#define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+
+/* flags used for fanotify_init() */
+#define FAN_CLOEXEC		0x00000001
+#define FAN_NONBLOCK		0x00000002
+
+/* These are NOT bitwise flags.  Both bits are used togther.  */
+#define FAN_CLASS_NOTIF		0x00000000
+#define FAN_CLASS_CONTENT	0x00000004
+#define FAN_CLASS_PRE_CONTENT	0x00000008
+#define FAN_ALL_CLASS_BITS	(FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
+				 FAN_CLASS_PRE_CONTENT)
+
+#define FAN_UNLIMITED_QUEUE	0x00000010
+#define FAN_UNLIMITED_MARKS	0x00000020
+
+#define FAN_ALL_INIT_FLAGS	(FAN_CLOEXEC | FAN_NONBLOCK | \
+				 FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
+				 FAN_UNLIMITED_MARKS)
+
+/* flags used for fanotify_modify_mark() */
+#define FAN_MARK_ADD		0x00000001
+#define FAN_MARK_REMOVE		0x00000002
+#define FAN_MARK_DONT_FOLLOW	0x00000004
+#define FAN_MARK_ONLYDIR	0x00000008
+#define FAN_MARK_MOUNT		0x00000010
+#define FAN_MARK_IGNORED_MASK	0x00000020
+#define FAN_MARK_IGNORED_SURV_MODIFY	0x00000040
+#define FAN_MARK_FLUSH		0x00000080
+
+#define FAN_ALL_MARK_FLAGS	(FAN_MARK_ADD |\
+				 FAN_MARK_REMOVE |\
+				 FAN_MARK_DONT_FOLLOW |\
+				 FAN_MARK_ONLYDIR |\
+				 FAN_MARK_MOUNT |\
+				 FAN_MARK_IGNORED_MASK |\
+				 FAN_MARK_IGNORED_SURV_MODIFY |\
+				 FAN_MARK_FLUSH)
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility.  Apps will get only the
+ * events that they originally wanted.  Be sure to add new events here!
+ */
+#define FAN_ALL_EVENTS (FAN_ACCESS |\
+			FAN_MODIFY |\
+			FAN_CLOSE |\
+			FAN_OPEN)
+
+/*
+ * All events which require a permission response from userspace
+ */
+#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
+			     FAN_ACCESS_PERM)
+
+#define FAN_ALL_OUTGOING_EVENTS	(FAN_ALL_EVENTS |\
+				 FAN_ALL_PERM_EVENTS |\
+				 FAN_Q_OVERFLOW)
+
+#define FANOTIFY_METADATA_VERSION	3
+
+struct fanotify_event_metadata {
+	__u32 event_len;
+	__u8 vers;
+	__u8 reserved;
+	__u16 metadata_len;
+	__aligned_u64 mask;
+	__s32 fd;
+	__s32 pid;
+};
+
+struct fanotify_response {
+	__s32 fd;
+	__u32 response;
+};
+
+/* Legit userspace responses to a _PERM event */
+#define FAN_ALLOW	0x01
+#define FAN_DENY	0x02
+/* No fd set in event */
+#define FAN_NOFD	-1
+
+/* Helper functions to deal with fanotify_event_metadata buffers */
+#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
+
+#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
+				   (struct fanotify_event_metadata*)(((char *)(meta)) + \
+				   (meta)->event_len))
+
+#define FAN_EVENT_OK(meta, len)	((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
+				(long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
+				(long)(meta)->event_len <= (long)(len))
+
+#endif /* _UAPI_LINUX_FANOTIFY_H */
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
new file mode 100644
index 0000000000000000000000000000000000000000..fb795c3b3c178ad3cd7c9e9e4547ffd492bac181
--- /dev/null
+++ b/include/uapi/linux/fb.h
@@ -0,0 +1,402 @@
+#ifndef _UAPI_LINUX_FB_H
+#define _UAPI_LINUX_FB_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* Definitions of frame buffers						*/
+
+#define FB_MAX			32	/* sufficient for now */
+
+/* ioctls
+   0x46 is 'F'								*/
+#define FBIOGET_VSCREENINFO	0x4600
+#define FBIOPUT_VSCREENINFO	0x4601
+#define FBIOGET_FSCREENINFO	0x4602
+#define FBIOGETCMAP		0x4604
+#define FBIOPUTCMAP		0x4605
+#define FBIOPAN_DISPLAY		0x4606
+#ifndef __KERNEL__
+#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
+#endif
+/* 0x4607-0x460B are defined below */
+/* #define FBIOGET_MONITORSPEC	0x460C */
+/* #define FBIOPUT_MONITORSPEC	0x460D */
+/* #define FBIOSWITCH_MONIBIT	0x460E */
+#define FBIOGET_CON2FBMAP	0x460F
+#define FBIOPUT_CON2FBMAP	0x4610
+#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
+#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
+#define FBIO_ALLOC              0x4613
+#define FBIO_FREE               0x4614
+#define FBIOGET_GLYPH           0x4615
+#define FBIOGET_HWCINFO         0x4616
+#define FBIOPUT_MODEINFO        0x4617
+#define FBIOGET_DISPINFO        0x4618
+#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
+
+#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
+#define FB_TYPE_PLANES			1	/* Non interleaved planes */
+#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
+#define FB_TYPE_TEXT			3	/* Text/attributes	*/
+#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
+#define FB_TYPE_FOURCC			5	/* Type identified by a V4L2 FOURCC */
+
+#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
+#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
+#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
+#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_GROUP	8	/* 8-15: SVGA tileblit compatible modes */
+#define FB_AUX_TEXT_SVGA_MASK	7	/* lower three bits says step */
+#define FB_AUX_TEXT_SVGA_STEP2	8	/* SVGA text mode:  text, attr */
+#define FB_AUX_TEXT_SVGA_STEP4	9	/* SVGA text mode:  text, attr,  2 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP8	10	/* SVGA text mode:  text, attr,  6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP16	11	/* SVGA text mode:  text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_SVGA_LAST	15	/* reserved up to 15 */
+
+#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
+#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
+#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
+
+#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
+#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
+#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
+#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
+#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
+#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
+#define FB_VISUAL_FOURCC		6	/* Visual identified by a V4L2 FOURCC */
+
+#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
+#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
+#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
+#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
+#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
+#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
+#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
+#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
+#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
+#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
+#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
+#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
+#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
+#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
+#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
+#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
+#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
+#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
+#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
+#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
+#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
+#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
+#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
+#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
+#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
+#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
+#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
+#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
+#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
+#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
+#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
+#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
+#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
+#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
+#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
+#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
+#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
+#define FB_ACCEL_I810           39      /* Intel 810/815                */
+#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
+#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
+#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
+#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
+#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
+#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
+#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
+#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
+#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
+#define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
+#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
+#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
+#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+#define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
+#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
+#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
+#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
+#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
+#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
+#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
+
+#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
+#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
+#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
+#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
+#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
+#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
+#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
+#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
+#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
+#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
+#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
+#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
+#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
+#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
+#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
+
+#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
+
+#define FB_CAP_FOURCC		1	/* Device supports FOURCC-based formats */
+
+struct fb_fix_screeninfo {
+	char id[16];			/* identification string eg "TT Builtin" */
+	unsigned long smem_start;	/* Start of frame buffer mem */
+					/* (physical address) */
+	__u32 smem_len;			/* Length of frame buffer mem */
+	__u32 type;			/* see FB_TYPE_*		*/
+	__u32 type_aux;			/* Interleave for interleaved Planes */
+	__u32 visual;			/* see FB_VISUAL_*		*/ 
+	__u16 xpanstep;			/* zero if no hardware panning  */
+	__u16 ypanstep;			/* zero if no hardware panning  */
+	__u16 ywrapstep;		/* zero if no hardware ywrap    */
+	__u32 line_length;		/* length of a line in bytes    */
+	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
+					/* (physical address) */
+	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
+	__u32 accel;			/* Indicate to driver which	*/
+					/*  specific chip/card we have	*/
+	__u16 capabilities;		/* see FB_CAP_*			*/
+	__u16 reserved[2];		/* Reserved for future compatibility */
+};
+
+/* Interpretation of offset for color fields: All offsets are from the right,
+ * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
+ * can use the offset as right argument to <<). A pixel afterwards is a bit
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
+ */
+struct fb_bitfield {
+	__u32 offset;			/* beginning of bitfield	*/
+	__u32 length;			/* length of bitfield		*/
+	__u32 msb_right;		/* != 0 : Most significant bit is */ 
+					/* right */ 
+};
+
+#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
+#define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
+
+#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
+#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
+#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
+#define FB_ACTIVATE_MASK       15
+					/* values			*/
+#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
+#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
+#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
+#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
+#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
+
+#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
+
+#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
+#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
+#define FB_SYNC_EXT		4	/* external sync		*/
+#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
+#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
+					/* vtotal = 144d/288n/576i => PAL  */
+					/* vtotal = 121d/242n/484i => NTSC */
+#define FB_SYNC_ON_GREEN	32	/* sync on green */
+
+#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
+#define FB_VMODE_INTERLACED	1	/* interlaced	*/
+#define FB_VMODE_DOUBLE		2	/* double scan */
+#define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
+#define FB_VMODE_MASK		255
+
+#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
+#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
+#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
+
+/*
+ * Display rotation support
+ */
+#define FB_ROTATE_UR      0
+#define FB_ROTATE_CW      1
+#define FB_ROTATE_UD      2
+#define FB_ROTATE_CCW     3
+
+#define PICOS2KHZ(a) (1000000000UL/(a))
+#define KHZ2PICOS(a) (1000000000UL/(a))
+
+struct fb_var_screeninfo {
+	__u32 xres;			/* visible resolution		*/
+	__u32 yres;
+	__u32 xres_virtual;		/* virtual resolution		*/
+	__u32 yres_virtual;
+	__u32 xoffset;			/* offset from virtual to visible */
+	__u32 yoffset;			/* resolution			*/
+
+	__u32 bits_per_pixel;		/* guess what			*/
+	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
+					/* >1 = FOURCC			*/
+	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
+	struct fb_bitfield green;	/* else only length is significant */
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;	/* transparency			*/	
+
+	__u32 nonstd;			/* != 0 Non standard pixel format */
+
+	__u32 activate;			/* see FB_ACTIVATE_*		*/
+
+	__u32 height;			/* height of picture in mm    */
+	__u32 width;			/* width of picture in mm     */
+
+	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
+
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
+	__u32 left_margin;		/* time from sync to picture	*/
+	__u32 right_margin;		/* time from picture to sync	*/
+	__u32 upper_margin;		/* time from sync to picture	*/
+	__u32 lower_margin;
+	__u32 hsync_len;		/* length of horizontal sync	*/
+	__u32 vsync_len;		/* length of vertical sync	*/
+	__u32 sync;			/* see FB_SYNC_*		*/
+	__u32 vmode;			/* see FB_VMODE_*		*/
+	__u32 rotate;			/* angle we rotate counter clockwise */
+	__u32 colorspace;		/* colorspace for FOURCC-based modes */
+	__u32 reserved[4];		/* Reserved for future compatibility */
+};
+
+struct fb_cmap {
+	__u32 start;			/* First entry	*/
+	__u32 len;			/* Number of entries */
+	__u16 *red;			/* Red values	*/
+	__u16 *green;
+	__u16 *blue;
+	__u16 *transp;			/* transparency, can be NULL */
+};
+
+struct fb_con2fbmap {
+	__u32 console;
+	__u32 framebuffer;
+};
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING        0
+#define VESA_VSYNC_SUSPEND      1
+#define VESA_HSYNC_SUSPEND      2
+#define VESA_POWERDOWN          3
+
+
+enum {
+	/* screen: unblanked, hsync: on,  vsync: on */
+	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
+
+	/* screen: blanked,   hsync: on,  vsync: on */
+	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
+
+	/* screen: blanked,   hsync: on,  vsync: off */
+	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: on */
+	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: off */
+	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
+};
+
+#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
+#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
+#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
+#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
+#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
+#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
+#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
+#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
+#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
+
+struct fb_vblank {
+	__u32 flags;			/* FB_VBLANK flags */
+	__u32 count;			/* counter of retraces since boot */
+	__u32 vcount;			/* current scanline position */
+	__u32 hcount;			/* current scandot position */
+	__u32 reserved[4];		/* reserved for future compatibility */
+};
+
+/* Internal HW accel */
+#define ROP_COPY 0
+#define ROP_XOR  1
+
+struct fb_copyarea {
+	__u32 dx;
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 sx;
+	__u32 sy;
+};
+
+struct fb_fillrect {
+	__u32 dx;	/* screen-relative */
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 color;
+	__u32 rop;
+};
+
+struct fb_image {
+	__u32 dx;		/* Where to place image */
+	__u32 dy;
+	__u32 width;		/* Size of image */
+	__u32 height;
+	__u32 fg_color;		/* Only used when a mono bitmap */
+	__u32 bg_color;
+	__u8  depth;		/* Depth of the image */
+	const char *data;	/* Pointer to image data */
+	struct fb_cmap cmap;	/* color map info */
+};
+
+/*
+ * hardware cursor control
+ */
+
+#define FB_CUR_SETIMAGE 0x01
+#define FB_CUR_SETPOS   0x02
+#define FB_CUR_SETHOT   0x04
+#define FB_CUR_SETCMAP  0x08
+#define FB_CUR_SETSHAPE 0x10
+#define FB_CUR_SETSIZE	0x20
+#define FB_CUR_SETALL   0xFF
+
+struct fbcurpos {
+	__u16 x, y;
+};
+
+struct fb_cursor {
+	__u16 set;		/* what to set */
+	__u16 enable;		/* cursor on/off */
+	__u16 rop;		/* bitop operation */
+	const char *mask;	/* cursor mask bits */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fb_image	image;	/* Cursor image */
+};
+
+#ifdef CONFIG_FB_BACKLIGHT
+/* Settings for the generic backlight code */
+#define FB_BACKLIGHT_LEVELS	128
+#define FB_BACKLIGHT_MAX	0xFF
+#endif
+
+
+#endif /* _UAPI_LINUX_FB_H */
diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h
new file mode 100644
index 0000000000000000000000000000000000000000..074b886c6be0a0f3d0f4d493050c365153ad1917
--- /dev/null
+++ b/include/uapi/linux/fcntl.h
@@ -0,0 +1,52 @@
+#ifndef _UAPI_LINUX_FCNTL_H
+#define _UAPI_LINUX_FCNTL_H
+
+#include <asm/fcntl.h>
+
+#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
+#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
+
+/*
+ * Cancel a blocking posix lock; internal use only until we expose an
+ * asynchronous lock api to userspace:
+ */
+#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
+
+/* Create a file descriptor with FD_CLOEXEC set. */
+#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
+
+/*
+ * Request nofications on a directory.
+ * See below for events that may be notified.
+ */
+#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
+
+/*
+ * Set and get of pipe page size array
+ */
+#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
+#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
+
+/*
+ * Types of directory notifications that may be requested.
+ */
+#define DN_ACCESS	0x00000001	/* File accessed */
+#define DN_MODIFY	0x00000002	/* File modified */
+#define DN_CREATE	0x00000004	/* File created */
+#define DN_DELETE	0x00000008	/* File removed */
+#define DN_RENAME	0x00000010	/* File renamed */
+#define DN_ATTRIB	0x00000020	/* File changed attibutes */
+#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
+
+#define AT_FDCWD		-100    /* Special value used to indicate
+                                           openat should use the current
+                                           working directory. */
+#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
+#define AT_REMOVEDIR		0x200   /* Remove directory instead of
+                                           unlinking file.  */
+#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
+#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
+#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
+
+
+#endif /* _UAPI_LINUX_FCNTL_H */
diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h
new file mode 100644
index 0000000000000000000000000000000000000000..f1f3dd5981b28ff73d5e52c2fb1606d174c3c5dd
--- /dev/null
+++ b/include/uapi/linux/fd.h
@@ -0,0 +1,382 @@
+#ifndef _UAPI_LINUX_FD_H
+#define _UAPI_LINUX_FD_H
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/* New file layout: Now the ioctl definitions immediately follow the
+ * definitions of the structures that they use */
+
+/*
+ * Geometry
+ */
+struct floppy_struct {
+	unsigned int	size,		/* nr of sectors total */
+			sect,		/* sectors per track */
+			head,		/* nr of heads */
+			track,		/* nr of tracks */
+			stretch;	/* bit 0 !=0 means double track steps */
+					/* bit 1 != 0 means swap sides */
+					/* bits 2..9 give the first sector */
+					/*  number (the LSB is flipped) */
+#define FD_STRETCH 1
+#define FD_SWAPSIDES 2
+#define FD_ZEROBASED 4
+#define FD_SECTBASEMASK 0x3FC
+#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
+#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
+
+	unsigned char	gap,		/* gap1 size */
+
+			rate,		/* data rate. |= 0x40 for perpendicular */
+#define FD_2M 0x4
+#define FD_SIZECODEMASK 0x38
+#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
+#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
+			     512 : 128 << FD_SIZECODE(floppy) )
+#define FD_PERP 0x40
+
+			spec1,		/* stepping rate, head unload time */
+			fmt_gap;	/* gap2 size */
+	const char	* name; /* used only for predefined formats */
+};
+
+
+/* commands needing write access have 0x40 set */
+/* commands needing super user access have 0x80 set */
+
+#define FDCLRPRM _IO(2, 0x41)
+/* clear user-defined parameters */
+
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
+#define FDSETMEDIAPRM FDSETPRM
+/* set user-defined parameters for current media */
+
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
+#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
+#define FDDEFMEDIAPRM FDDEFPRM
+#define FDGETMEDIAPRM FDGETPRM
+/* set/get disk parameters */
+
+
+#define	FDMSGON  _IO(2,0x45)
+#define	FDMSGOFF _IO(2,0x46)
+/* issue/don't issue kernel messages on media type change */
+
+
+/* 
+ * Formatting (obsolete)
+ */
+#define FD_FILL_BYTE 0xF6 /* format fill byte. */
+
+struct format_descr {
+	unsigned int device,head,track;
+};
+
+#define FDFMTBEG _IO(2,0x47)
+/* begin formatting a disk */
+#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
+/* format the specified track */
+#define FDFMTEND _IO(2,0x49)
+/* end formatting a disk */
+
+
+/*
+ * Error thresholds
+ */
+struct floppy_max_errors {
+	unsigned int
+	  abort,      /* number of errors to be reached before aborting */
+	  read_track, /* maximal number of errors permitted to read an
+		       * entire track at once */
+	  reset,      /* maximal number of errors before a reset is tried */
+	  recal,      /* maximal number of errors before a recalibrate is
+		       * tried */
+
+	  /*
+	   * Threshold for reporting FDC errors to the console.
+	   * Setting this to zero may flood your screen when using
+	   * ultra cheap floppies ;-)
+	   */
+	  reporting;
+
+};
+
+#define FDSETEMSGTRESH	_IO(2,0x4a)
+/* set fdc error reporting threshold */
+
+#define FDFLUSH  _IO(2,0x4b)
+/* flush buffers for media; either for verifying media, or for
+ * handling a media change without closing the file descriptor */
+
+#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
+#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
+/* set/get abortion and read_track threshold. See also floppy_drive_params
+ * structure */
+
+
+typedef char floppy_drive_name[16];
+#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
+/* get drive type: 5 1/4 or 3 1/2 */
+
+
+/*
+ * Drive parameters (user modifiable)
+ */
+struct floppy_drive_params {
+	signed char cmos;		/* CMOS type */
+	
+	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
+	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
+	 */
+	unsigned long max_dtr;		/* Step rate, usec */
+	unsigned long hlt;     		/* Head load/settle time, msec */
+	unsigned long hut;     		/* Head unload time (remnant of 
+					 * 8" drives) */
+	unsigned long srt;     		/* Step rate, usec */
+
+	unsigned long spinup;		/* time needed for spinup (expressed
+					 * in jiffies) */
+	unsigned long spindown;		/* timeout needed for spindown */
+	unsigned char spindown_offset;	/* decides in which position the disk
+					 * will stop */
+	unsigned char select_delay;	/* delay to wait after select */
+	unsigned char rps;		/* rotations per second */
+	unsigned char tracks;		/* maximum number of tracks */
+	unsigned long timeout;		/* timeout for interrupt requests */
+	
+	unsigned char interleave_sect;	/* if there are more sectors, use 
+					 * interleave */
+	
+	struct floppy_max_errors max_errors;
+	
+	char flags;			/* various flags, including ftd_msg */
+/*
+ * Announce successful media type detection and media information loss after
+ * disk changes.
+ * Also used to enable/disable printing of overrun warnings.
+ */
+
+#define FTD_MSG 0x10
+#define FD_BROKEN_DCL 0x20
+#define FD_DEBUG 0x02
+#define FD_SILENT_DCL_CLEAR 0x4
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
+				considerations */
+
+	char read_track;		/* use readtrack during probing? */
+
+/*
+ * Auto-detection. Each drive type has eight formats which are
+ * used in succession to try to read the disk. If the FDC cannot lock onto
+ * the disk, the next format is tried. This uses the variable 'probing'.
+ */
+	short autodetect[8];		/* autodetected formats */
+	
+	int checkfreq; /* how often should the drive be checked for disk 
+			* changes */
+	int native_format; /* native format of this drive */
+};
+
+enum {
+	FD_NEED_TWADDLE_BIT,	/* more magic */
+	FD_VERIFY_BIT,		/* inquire for write protection */
+	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
+				 * to clear media change status */
+	FD_UNUSED_BIT,
+	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
+	FD_DISK_WRITABLE_BIT	/* disk is writable */
+};
+
+#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
+#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
+/* set/get drive parameters */
+
+
+/*
+ * Current drive state (not directly modifiable by user, readonly)
+ */
+struct floppy_drive_struct {
+	unsigned long flags;
+/* values for these flags */
+#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
+#define FD_VERIFY (1 << FD_VERIFY_BIT)
+#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
+#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
+#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
+
+	unsigned long spinup_date;
+	unsigned long select_date;
+	unsigned long first_read_date;
+	short probed_format;
+	short track; /* current track */
+	short maxblock; /* id of highest block read */
+	short maxtrack; /* id of highest half track read */
+	int generation; /* how many diskchanges? */
+
+/*
+ * (User-provided) media information is _not_ discarded after a media change
+ * if the corresponding keep_data flag is non-zero. Positive values are
+ * decremented after each probe.
+ */
+	int keep_data;
+	
+	/* Prevent "aliased" accesses. */
+	int fd_ref;
+	int fd_device;
+	unsigned long last_checked; /* when was the drive last checked for a disk 
+			   * change? */
+	
+	char *dmabuf;
+	int bufblocks;
+};
+
+#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
+#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
+/* get drive state: GET returns the cached state, POLL polls for new state */
+
+
+/*
+ * reset FDC
+ */
+enum reset_mode {
+	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
+	FD_RESET_IF_RAWCMD,	/* obsolete */
+	FD_RESET_ALWAYS		/* reset always */
+};
+#define FDRESET _IO(2, 0x54)
+
+
+/*
+ * FDC state
+ */
+struct floppy_fdc_state {	
+	int spec1;		/* spec1 value last used */
+	int spec2;		/* spec2 value last used */
+	int dtr;
+	unsigned char version;	/* FDC version code */
+	unsigned char dor;
+	unsigned long address;	/* io address */
+	unsigned int rawcmd:2;
+	unsigned int reset:1;
+	unsigned int need_configure:1;
+	unsigned int perp_mode:2;
+	unsigned int has_fifo:1;
+	unsigned int driver_version;	/* version code for floppy driver */
+#define FD_DRIVER_VERSION 0x100
+/* user programs using the floppy API should use floppy_fdc_state to
+ * get the version number of the floppy driver that they are running
+ * on. If this version number is bigger than the one compiled into the
+ * user program (the FD_DRIVER_VERSION define), it should be prepared
+ * to bigger structures
+ */
+
+	unsigned char track[4];
+	/* Position of the heads of the 4 units attached to this FDC,
+	 * as stored on the FDC. In the future, the position as stored
+	 * on the FDC might not agree with the actual physical
+	 * position of these drive heads. By allowing such
+	 * disagreement, it will be possible to reset the FDC without
+	 * incurring the expensive cost of repositioning all heads.
+	 * Right now, these positions are hard wired to 0. */
+
+};
+
+#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
+
+
+/*
+ * Asynchronous Write error tracking
+ */
+struct floppy_write_errors {
+	/* Write error logging.
+	 *
+	 * These fields can be cleared with the FDWERRORCLR ioctl.
+	 * Only writes that were attempted but failed due to a physical media
+	 * error are logged.  write(2) calls that fail and return an error code
+	 * to the user process are not counted.
+	 */
+
+	unsigned int write_errors;  /* number of physical write errors 
+				     * encountered */
+	
+	/* position of first and last write errors */
+	unsigned long first_error_sector;
+	int           first_error_generation;
+	unsigned long last_error_sector;
+	int           last_error_generation;
+	
+	unsigned int badness; /* highest retry count for a read or write 
+			       * operation */
+};
+
+#define FDWERRORCLR  _IO(2, 0x56)
+/* clear write error and badness information */
+#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
+/* get write error and badness information */
+
+
+/*
+ * Raw commands
+ */
+/* new interface flag: now we can do them in batches */
+#define FDHAVEBATCHEDRAWCMD
+
+struct floppy_raw_cmd {
+	unsigned int flags;
+#define FD_RAW_READ 1
+#define FD_RAW_WRITE 2
+#define FD_RAW_NO_MOTOR 4
+#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
+#define FD_RAW_INTR 8    /* wait for an interrupt */
+#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
+				    * completion */
+#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
+#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
+
+/* more "in" flags */
+#define FD_RAW_MORE 0x100  /* more records follow */
+#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
+#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
+#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
+				  * detection too */
+
+/* more "out" flags */
+#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
+#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
+
+	void __user *data;
+	char *kernel_data; /* location of data buffer in the kernel */
+	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
+				      * within the kernel */
+	long length; /* in: length of dma transfer. out: remaining bytes */
+	long phys_length; /* physical length, if different from dma length */
+	int buffer_length; /* length of allocated buffer */
+
+	unsigned char rate;
+	unsigned char cmd_count;
+	unsigned char cmd[16];
+	unsigned char reply_count;
+	unsigned char reply[16];
+	int track;
+	int resultcode;
+
+	int reserved1;
+	int reserved2;
+};
+
+#define FDRAWCMD _IO(2, 0x58)
+/* send a raw command to the fdc. Structure size not included, because of
+ * batches */
+
+#define FDTWADDLE _IO(2, 0x59)
+/* flicker motor-on bit before reading a sector. Experimental */
+
+
+#define FDEJECT _IO(2, 0x5a)
+/* eject the disk */
+
+
+
+#endif /* _UAPI_LINUX_FD_H */
diff --git a/include/linux/fdreg.h b/include/uapi/linux/fdreg.h
similarity index 100%
rename from include/linux/fdreg.h
rename to include/uapi/linux/fdreg.h
diff --git a/include/linux/fib_rules.h b/include/uapi/linux/fib_rules.h
similarity index 100%
rename from include/linux/fib_rules.h
rename to include/uapi/linux/fib_rules.h
diff --git a/include/linux/fiemap.h b/include/uapi/linux/fiemap.h
similarity index 100%
rename from include/linux/fiemap.h
rename to include/uapi/linux/fiemap.h
diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h
new file mode 100644
index 0000000000000000000000000000000000000000..3d7922433abad7b6e3cf7985897e9536eda49037
--- /dev/null
+++ b/include/uapi/linux/filter.h
@@ -0,0 +1,135 @@
+/*
+ * Linux Socket Filter Data Structures
+ */
+
+#ifndef _UAPI__LINUX_FILTER_H__
+#define _UAPI__LINUX_FILTER_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/*
+ * Current version of the filter code architecture.
+ */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ *	Try and keep these values and structures similar to BSD, especially
+ *	the BPF code definitions which need to match so you can share filters
+ */
+ 
+struct sock_filter {	/* Filter block */
+	__u16	code;   /* Actual filter code */
+	__u8	jt;	/* Jump true */
+	__u8	jf;	/* Jump false */
+	__u32	k;      /* Generic multiuse field */
+};
+
+struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
+	unsigned short		len;	/* Number of filter blocks */
+	struct sock_filter __user *filter;
+};
+
+/*
+ * Instruction classes
+ */
+
+#define BPF_CLASS(code) ((code) & 0x07)
+#define         BPF_LD          0x00
+#define         BPF_LDX         0x01
+#define         BPF_ST          0x02
+#define         BPF_STX         0x03
+#define         BPF_ALU         0x04
+#define         BPF_JMP         0x05
+#define         BPF_RET         0x06
+#define         BPF_MISC        0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code)  ((code) & 0x18)
+#define         BPF_W           0x00
+#define         BPF_H           0x08
+#define         BPF_B           0x10
+#define BPF_MODE(code)  ((code) & 0xe0)
+#define         BPF_IMM         0x00
+#define         BPF_ABS         0x20
+#define         BPF_IND         0x40
+#define         BPF_MEM         0x60
+#define         BPF_LEN         0x80
+#define         BPF_MSH         0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code)    ((code) & 0xf0)
+#define         BPF_ADD         0x00
+#define         BPF_SUB         0x10
+#define         BPF_MUL         0x20
+#define         BPF_DIV         0x30
+#define         BPF_OR          0x40
+#define         BPF_AND         0x50
+#define         BPF_LSH         0x60
+#define         BPF_RSH         0x70
+#define         BPF_NEG         0x80
+#define		BPF_MOD		0x90
+#define		BPF_XOR		0xa0
+
+#define         BPF_JA          0x00
+#define         BPF_JEQ         0x10
+#define         BPF_JGT         0x20
+#define         BPF_JGE         0x30
+#define         BPF_JSET        0x40
+#define BPF_SRC(code)   ((code) & 0x08)
+#define         BPF_K           0x00
+#define         BPF_X           0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code)  ((code) & 0x18)
+#define         BPF_A           0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define         BPF_TAX         0x00
+#define         BPF_TXA         0x80
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/*
+ * Macros for filter block array initializers.
+ */
+#ifndef BPF_STMT
+#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
+#endif
+#ifndef BPF_JUMP
+#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
+#endif
+
+/*
+ * Number of scratch memory words for: BPF_ST and BPF_STX
+ */
+#define BPF_MEMWORDS 16
+
+/* RATIONALE. Negative offsets are invalid in BPF.
+   We use them to reference ancillary data.
+   Unlike introduction new instructions, it does not break
+   existing compilers/optimizers.
+ */
+#define SKF_AD_OFF    (-0x1000)
+#define SKF_AD_PROTOCOL 0
+#define SKF_AD_PKTTYPE 	4
+#define SKF_AD_IFINDEX 	8
+#define SKF_AD_NLATTR	12
+#define SKF_AD_NLATTR_NEST	16
+#define SKF_AD_MARK 	20
+#define SKF_AD_QUEUE	24
+#define SKF_AD_HATYPE	28
+#define SKF_AD_RXHASH	32
+#define SKF_AD_CPU	36
+#define SKF_AD_ALU_XOR_X	40
+#define SKF_AD_MAX	44
+#define SKF_NET_OFF   (-0x100000)
+#define SKF_LL_OFF    (-0x200000)
+
+
+#endif /* _UAPI__LINUX_FILTER_H__ */
diff --git a/include/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h
similarity index 100%
rename from include/linux/firewire-cdev.h
rename to include/uapi/linux/firewire-cdev.h
diff --git a/include/linux/firewire-constants.h b/include/uapi/linux/firewire-constants.h
similarity index 100%
rename from include/linux/firewire-constants.h
rename to include/uapi/linux/firewire-constants.h
diff --git a/include/uapi/linux/flat.h b/include/uapi/linux/flat.h
new file mode 100644
index 0000000000000000000000000000000000000000..88cd6baba8f371046fff2258db1ae1019c54ed84
--- /dev/null
+++ b/include/uapi/linux/flat.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2002-2003  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ *                          The Silver Hammer Group, Ltd.
+ *
+ * This file provides the definitions and structures needed to
+ * support uClinux flat-format executables.
+ */
+
+#ifndef _UAPI_LINUX_FLAT_H
+#define _UAPI_LINUX_FLAT_H
+
+
+#define	FLAT_VERSION			0x00000004L
+
+#ifdef CONFIG_BINFMT_SHARED_FLAT
+#define	MAX_SHARED_LIBS			(4)
+#else
+#define	MAX_SHARED_LIBS			(1)
+#endif
+
+/*
+ * To make everything easier to port and manage cross platform
+ * development,  all fields are in network byte order.
+ */
+
+struct flat_hdr {
+	char magic[4];
+	unsigned long rev;          /* version (as above) */
+	unsigned long entry;        /* Offset of first executable instruction
+	                               with text segment from beginning of file */
+	unsigned long data_start;   /* Offset of data segment from beginning of
+	                               file */
+	unsigned long data_end;     /* Offset of end of data segment
+	                               from beginning of file */
+	unsigned long bss_end;      /* Offset of end of bss segment from beginning
+	                               of file */
+
+	/* (It is assumed that data_end through bss_end forms the bss segment.) */
+
+	unsigned long stack_size;   /* Size of stack, in bytes */
+	unsigned long reloc_start;  /* Offset of relocation records from
+	                               beginning of file */
+	unsigned long reloc_count;  /* Number of relocation records */
+	unsigned long flags;       
+	unsigned long build_date;   /* When the program/library was built */
+	unsigned long filler[5];    /* Reservered, set to zero */
+};
+
+#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
+#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
+#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
+#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
+#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
+
+
+
+#endif /* _UAPI_LINUX_FLAT_H */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
new file mode 100644
index 0000000000000000000000000000000000000000..9fcc880d4be2fe7a17c5b6f64af2d41b0315c1d6
--- /dev/null
+++ b/include/uapi/linux/fs.h
@@ -0,0 +1,334 @@
+#ifndef _UAPI_LINUX_FS_H
+#define _UAPI_LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table
+ * structures etc.
+ */
+
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be 
+ * recompiled to take full advantage of the new limits..  
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
+#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+#define SEEK_SET	0	/* seek relative to beginning of file */
+#define SEEK_CUR	1	/* seek relative to current file position */
+#define SEEK_END	2	/* seek relative to end of file */
+#define SEEK_DATA	3	/* seek to the next data */
+#define SEEK_HOLE	4	/* seek to the next hole */
+#define SEEK_MAX	SEEK_HOLE
+
+struct fstrim_range {
+	__u64 start;
+	__u64 len;
+	__u64 minlen;
+};
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+	unsigned long nr_files;		/* read only */
+	unsigned long nr_free_files;	/* read only */
+	unsigned long max_files;		/* tunable */
+};
+
+struct inodes_stat_t {
+	int nr_inodes;
+	int nr_unused;
+	int dummy[5];		/* padding for sysctl ABI compatibility */
+};
+
+
+#define NR_FILE  8192	/* this can well be larger on a larger system */
+
+#define MAY_EXEC		0x00000001
+#define MAY_WRITE		0x00000002
+#define MAY_READ		0x00000004
+#define MAY_APPEND		0x00000008
+#define MAY_ACCESS		0x00000010
+#define MAY_OPEN		0x00000020
+#define MAY_CHDIR		0x00000040
+/* called from RCU mode, don't block */
+#define MAY_NOT_BLOCK		0x00000080
+
+/*
+ * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
+ * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+ */
+
+/* file is open for reading */
+#define FMODE_READ		((__force fmode_t)0x1)
+/* file is open for writing */
+#define FMODE_WRITE		((__force fmode_t)0x2)
+/* file is seekable */
+#define FMODE_LSEEK		((__force fmode_t)0x4)
+/* file can be accessed using pread */
+#define FMODE_PREAD		((__force fmode_t)0x8)
+/* file can be accessed using pwrite */
+#define FMODE_PWRITE		((__force fmode_t)0x10)
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC		((__force fmode_t)0x20)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY		((__force fmode_t)0x40)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL		((__force fmode_t)0x80)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+   (specialy hack for floppy.c) */
+#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
+/* 32bit hashes as llseek() offset (for directories) */
+#define FMODE_32BITHASH         ((__force fmode_t)0x200)
+/* 64bit hashes as llseek() offset (for directories) */
+#define FMODE_64BITHASH         ((__force fmode_t)0x400)
+
+/*
+ * Don't update ctime and mtime.
+ *
+ * Currently a special hack for the XFS open_by_handle ioctl, but we'll
+ * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
+ */
+#define FMODE_NOCMTIME		((__force fmode_t)0x800)
+
+/* Expect random access pattern */
+#define FMODE_RANDOM		((__force fmode_t)0x1000)
+
+/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
+#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)
+
+/* File is opened with O_PATH; almost nothing can be done with it */
+#define FMODE_PATH		((__force fmode_t)0x4000)
+
+/* File was opened by fanotify and shouldn't generate fanotify events */
+#define FMODE_NONOTIFY		((__force fmode_t)0x1000000)
+
+/*
+ * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
+ * that indicates that they should check the contents of the iovec are
+ * valid, but not check the memory that the iovec elements
+ * points too.
+ */
+#define CHECK_IOVEC_ONLY -1
+
+#define SEL_IN		1
+#define SEL_OUT		2
+#define SEL_EX		4
+
+/* public flags for file_system_type */
+#define FS_REQUIRES_DEV 1 
+#define FS_BINARY_MOUNTDATA 2
+#define FS_HAS_SUBTYPE 4
+#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
+#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move()
+					 * during rename() internally.
+					 */
+
+/*
+ * These are the fs-independent mount-flags: up to 32 flags are supported
+ */
+#define MS_RDONLY	 1	/* Mount read-only */
+#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
+#define MS_NODEV	 4	/* Disallow access to device special files */
+#define MS_NOEXEC	 8	/* Disallow program execution */
+#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
+#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
+#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
+#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
+#define MS_NOATIME	1024	/* Do not update access times. */
+#define MS_NODIRATIME	2048	/* Do not update directory access times */
+#define MS_BIND		4096
+#define MS_MOVE		8192
+#define MS_REC		16384
+#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
+				   MS_VERBOSE is deprecated. */
+#define MS_SILENT	32768
+#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
+#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
+#define MS_PRIVATE	(1<<18)	/* change to private */
+#define MS_SLAVE	(1<<19)	/* change to slave */
+#define MS_SHARED	(1<<20)	/* change to shared */
+#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
+#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
+#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
+#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
+#define MS_NOSEC	(1<<28)
+#define MS_BORN		(1<<29)
+#define MS_ACTIVE	(1<<30)
+#define MS_NOUSER	(1<<31)
+
+/*
+ * Superblock flags that can be altered by MS_REMOUNT
+ */
+#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
+
+/*
+ * Old magic mount flag and mask
+ */
+#define MS_MGC_VAL 0xC0ED0000
+#define MS_MGC_MSK 0xffff0000
+
+/* Inode flags - they have nothing to superblock flags now */
+
+#define S_SYNC		1	/* Writes are synced at once */
+#define S_NOATIME	2	/* Do not update access times */
+#define S_APPEND	4	/* Append-only file */
+#define S_IMMUTABLE	8	/* Immutable file */
+#define S_DEAD		16	/* removed, but still open directory */
+#define S_NOQUOTA	32	/* Inode is not counted to quota */
+#define S_DIRSYNC	64	/* Directory modifications are synchronous */
+#define S_NOCMTIME	128	/* Do not update file c/mtime */
+#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
+#define S_PRIVATE	512	/* Inode is fs-internal */
+#define S_IMA		1024	/* Inode has an associated IMA struct */
+#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
+#define S_NOSEC		4096	/* no suid or xattr security attributes */
+
+/*
+ * Note that nosuid etc flags are inode-specific: setting some file-system
+ * flags just means all the inodes inherit those flags by default. It might be
+ * possible to override it selectively if you really wanted to with some
+ * ioctl() that is not currently implemented.
+ *
+ * Exception: MS_RDONLY is always applied to the entire file system.
+ *
+ * Unfortunately, it is possible to change a filesystems flags with it mounted
+ * with files in use.  This means that all of the inodes will not have their
+ * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
+ * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
+ */
+#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
+
+#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
+#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
+					((inode)->i_flags & S_SYNC))
+#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
+					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
+#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
+#define IS_NOATIME(inode)   __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
+#define IS_I_VERSION(inode)   __IS_FLG(inode, MS_I_VERSION)
+
+#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
+#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
+#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
+#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
+
+#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
+#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
+#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
+#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
+#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
+#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
+#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
+
+/* the read-only stuff doesn't really belong here, but any other place is
+   probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
+#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
+#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
+#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
+#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
+#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
+#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG      _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons.  Do not use sizeof! */
+
+#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET  _IOR(0x12,112,size_t)
+#define BLKBSZSET  _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
+#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
+#define BLKTRACESTART _IO(0x12,116)
+#define BLKTRACESTOP _IO(0x12,117)
+#define BLKTRACETEARDOWN _IO(0x12,118)
+#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
+#define BLKROTATIONAL _IO(0x12,126)
+#define BLKZEROOUT _IO(0x12,127)
+
+#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
+#define FIBMAP	   _IO(0x00,1)	/* bmap access */
+#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
+#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
+#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
+#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
+
+#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
+#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
+#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
+#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
+#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
+#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
+#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
+#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
+#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
+
+/*
+ * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
+ */
+#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
+#define	FS_UNRM_FL			0x00000002 /* Undelete */
+#define	FS_COMPR_FL			0x00000004 /* Compress file */
+#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
+#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
+#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
+#define FS_NODUMP_FL			0x00000040 /* do not dump file */
+#define FS_NOATIME_FL			0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define FS_DIRTY_FL			0x00000100
+#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
+#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
+#define FS_ECOMPR_FL			0x00000800 /* Compression error */
+/* End compression flags --- maybe not all used */
+#define FS_BTREE_FL			0x00001000 /* btree format dir */
+#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
+#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
+#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
+#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
+#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
+#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
+#define FS_EXTENT_FL			0x00080000 /* Extents */
+#define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
+#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
+#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
+
+#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
+#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
+
+
+#define SYNC_FILE_RANGE_WAIT_BEFORE	1
+#define SYNC_FILE_RANGE_WRITE		2
+#define SYNC_FILE_RANGE_WAIT_AFTER	4
+
+#endif /* _UAPI_LINUX_FS_H */
diff --git a/include/uapi/linux/fsl_hypervisor.h b/include/uapi/linux/fsl_hypervisor.h
new file mode 100644
index 0000000000000000000000000000000000000000..1bf04967fec4be6b084957672e1708b888c55f5d
--- /dev/null
+++ b/include/uapi/linux/fsl_hypervisor.h
@@ -0,0 +1,220 @@
+/*
+ * Freescale hypervisor ioctl and kernel interface
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ *
+ * This file is used by the Freescale hypervisor management driver.  It can
+ * also be included by applications that need to communicate with the driver
+ * via the ioctl interface.
+ */
+
+#ifndef _UAPIFSL_HYPERVISOR_H
+#define _UAPIFSL_HYPERVISOR_H
+
+#include <linux/types.h>
+
+/**
+ * struct fsl_hv_ioctl_restart - restart a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to restart, or -1 for the
+ *             calling partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_RESTART
+ */
+struct fsl_hv_ioctl_restart {
+	__u32 ret;
+	__u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_status - get a partition's status
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to query, or -1 for the
+ *             calling partition
+ * @status: The returned status of the partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
+ *
+ * Values of 'status':
+ *    0 = Stopped
+ *    1 = Running
+ *    2 = Starting
+ *    3 = Stopping
+ */
+struct fsl_hv_ioctl_status {
+	__u32 ret;
+	__u32 partition;
+	__u32 status;
+};
+
+/**
+ * struct fsl_hv_ioctl_start - start a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to control
+ * @entry_point: The offset within the guest IMA to start execution
+ * @load: If non-zero, reload the partition's images before starting
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_START
+ */
+struct fsl_hv_ioctl_start {
+	__u32 ret;
+	__u32 partition;
+	__u32 entry_point;
+	__u32 load;
+};
+
+/**
+ * struct fsl_hv_ioctl_stop - stop a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to stop, or -1 for the calling
+ *             partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_STOP
+ */
+struct fsl_hv_ioctl_stop {
+	__u32 ret;
+	__u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_memcpy - copy memory between partitions
+ * @ret: return error code from the hypervisor
+ * @source: the partition ID of the source partition, or -1 for this
+ *          partition
+ * @target: the partition ID of the target partition, or -1 for this
+ *          partition
+ * @reserved: reserved, must be set to 0
+ * @local_addr: user-space virtual address of a buffer in the local
+ *              partition
+ * @remote_addr: guest physical address of a buffer in the
+ *           remote partition
+ * @count: the number of bytes to copy.  Both the local and remote
+ *         buffers must be at least 'count' bytes long
+ *
+ * Used by FSL_HV_IOCTL_MEMCPY
+ *
+ * The 'local' partition is the partition that calls this ioctl.  The
+ * 'remote' partition is a different partition.  The data is copied from
+ * the 'source' paritition' to the 'target' partition.
+ *
+ * The buffer in the remote partition must be guest physically
+ * contiguous.
+ *
+ * This ioctl does not support copying memory between two remote
+ * partitions or within the same partition, so either 'source' or
+ * 'target' (but not both) must be -1.  In other words, either
+ *
+ *      source == local and target == remote
+ * or
+ *      source == remote and target == local
+ */
+struct fsl_hv_ioctl_memcpy {
+	__u32 ret;
+	__u32 source;
+	__u32 target;
+	__u32 reserved;	/* padding to ensure local_vaddr is aligned */
+	__u64 local_vaddr;
+	__u64 remote_paddr;
+	__u64 count;
+};
+
+/**
+ * struct fsl_hv_ioctl_doorbell - ring a doorbell
+ * @ret: return error code from the hypervisor
+ * @doorbell: the handle of the doorbell to ring doorbell
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_doorbell {
+	__u32 ret;
+	__u32 doorbell;
+};
+
+/**
+ * struct fsl_hv_ioctl_prop - get/set a device tree property
+ * @ret: return error code from the hypervisor
+ * @handle: handle of partition whose tree to access
+ * @path: virtual address of path name of node to access
+ * @propname: virtual address of name of property to access
+ * @propval: virtual address of property data buffer
+ * @proplen: Size of property data buffer
+ * @reserved: reserved, must be set to 0
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_prop {
+	__u32 ret;
+	__u32 handle;
+	__u64 path;
+	__u64 propname;
+	__u64 propval;
+	__u32 proplen;
+	__u32 reserved;	/* padding to ensure structure is aligned */
+};
+
+/* The ioctl type, documented in ioctl-number.txt */
+#define FSL_HV_IOCTL_TYPE	0xAF
+
+/* Restart another partition */
+#define FSL_HV_IOCTL_PARTITION_RESTART \
+	_IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
+
+/* Get a partition's status */
+#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
+	_IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
+
+/* Boot another partition */
+#define FSL_HV_IOCTL_PARTITION_START \
+	_IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
+
+/* Stop this or another partition */
+#define FSL_HV_IOCTL_PARTITION_STOP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
+
+/* Copy data from one partition to another */
+#define FSL_HV_IOCTL_MEMCPY \
+	_IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
+
+/* Ring a doorbell */
+#define FSL_HV_IOCTL_DOORBELL \
+	_IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
+
+/* Get a property from another guest's device tree */
+#define FSL_HV_IOCTL_GETPROP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
+
+/* Set a property in another guest's device tree */
+#define FSL_HV_IOCTL_SETPROP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
+
+
+#endif /* _UAPIFSL_HYPERVISOR_H */
diff --git a/include/linux/fuse.h b/include/uapi/linux/fuse.h
similarity index 100%
rename from include/linux/fuse.h
rename to include/uapi/linux/fuse.h
diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h
new file mode 100644
index 0000000000000000000000000000000000000000..0b1f716373c71b31136a8be62068eed38862561c
--- /dev/null
+++ b/include/uapi/linux/futex.h
@@ -0,0 +1,152 @@
+#ifndef _UAPI_LINUX_FUTEX_H
+#define _UAPI_LINUX_FUTEX_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Second argument to futex syscall */
+
+
+#define FUTEX_WAIT		0
+#define FUTEX_WAKE		1
+#define FUTEX_FD		2
+#define FUTEX_REQUEUE		3
+#define FUTEX_CMP_REQUEUE	4
+#define FUTEX_WAKE_OP		5
+#define FUTEX_LOCK_PI		6
+#define FUTEX_UNLOCK_PI		7
+#define FUTEX_TRYLOCK_PI	8
+#define FUTEX_WAIT_BITSET	9
+#define FUTEX_WAKE_BITSET	10
+#define FUTEX_WAIT_REQUEUE_PI	11
+#define FUTEX_CMP_REQUEUE_PI	12
+
+#define FUTEX_PRIVATE_FLAG	128
+#define FUTEX_CLOCK_REALTIME	256
+#define FUTEX_CMD_MASK		~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
+
+#define FUTEX_WAIT_PRIVATE	(FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_PRIVATE	(FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_REQUEUE_PRIVATE	(FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_OP_PRIVATE	(FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
+#define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+
+/*
+ * Support for robust futexes: the kernel cleans up held futexes at
+ * thread exit time.
+ */
+
+/*
+ * Per-lock list entry - embedded in user-space locks, somewhere close
+ * to the futex field. (Note: user-space uses a double-linked list to
+ * achieve O(1) list add and remove, but the kernel only needs to know
+ * about the forward link)
+ *
+ * NOTE: this structure is part of the syscall ABI, and must not be
+ * changed.
+ */
+struct robust_list {
+	struct robust_list __user *next;
+};
+
+/*
+ * Per-thread list head:
+ *
+ * NOTE: this structure is part of the syscall ABI, and must only be
+ * changed if the change is first communicated with the glibc folks.
+ * (When an incompatible change is done, we'll increase the structure
+ *  size, which glibc will detect)
+ */
+struct robust_list_head {
+	/*
+	 * The head of the list. Points back to itself if empty:
+	 */
+	struct robust_list list;
+
+	/*
+	 * This relative offset is set by user-space, it gives the kernel
+	 * the relative position of the futex field to examine. This way
+	 * we keep userspace flexible, to freely shape its data-structure,
+	 * without hardcoding any particular offset into the kernel:
+	 */
+	long futex_offset;
+
+	/*
+	 * The death of the thread may race with userspace setting
+	 * up a lock's links. So to handle this race, userspace first
+	 * sets this field to the address of the to-be-taken lock,
+	 * then does the lock acquire, and then adds itself to the
+	 * list, and then clears this field. Hence the kernel will
+	 * always have full knowledge of all locks that the thread
+	 * _might_ have taken. We check the owner TID in any case,
+	 * so only truly owned locks will be handled.
+	 */
+	struct robust_list __user *list_op_pending;
+};
+
+/*
+ * Are there any waiters for this robust futex:
+ */
+#define FUTEX_WAITERS		0x80000000
+
+/*
+ * The kernel signals via this bit that a thread holding a futex
+ * has exited without unlocking the futex. The kernel also does
+ * a FUTEX_WAKE on such futexes, after setting the bit, to wake
+ * up any possible waiters:
+ */
+#define FUTEX_OWNER_DIED	0x40000000
+
+/*
+ * The rest of the robust-futex field is for the TID:
+ */
+#define FUTEX_TID_MASK		0x3fffffff
+
+/*
+ * This limit protects against a deliberately circular list.
+ * (Not worth introducing an rlimit for it)
+ */
+#define ROBUST_LIST_LIMIT	2048
+
+/*
+ * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
+ * match of any bit.
+ */
+#define FUTEX_BITSET_MATCH_ANY	0xffffffff
+
+
+#define FUTEX_OP_SET		0	/* *(int *)UADDR2 = OPARG; */
+#define FUTEX_OP_ADD		1	/* *(int *)UADDR2 += OPARG; */
+#define FUTEX_OP_OR		2	/* *(int *)UADDR2 |= OPARG; */
+#define FUTEX_OP_ANDN		3	/* *(int *)UADDR2 &= ~OPARG; */
+#define FUTEX_OP_XOR		4	/* *(int *)UADDR2 ^= OPARG; */
+
+#define FUTEX_OP_OPARG_SHIFT	8	/* Use (1 << OPARG) instead of OPARG.  */
+
+#define FUTEX_OP_CMP_EQ		0	/* if (oldval == CMPARG) wake */
+#define FUTEX_OP_CMP_NE		1	/* if (oldval != CMPARG) wake */
+#define FUTEX_OP_CMP_LT		2	/* if (oldval < CMPARG) wake */
+#define FUTEX_OP_CMP_LE		3	/* if (oldval <= CMPARG) wake */
+#define FUTEX_OP_CMP_GT		4	/* if (oldval > CMPARG) wake */
+#define FUTEX_OP_CMP_GE		5	/* if (oldval >= CMPARG) wake */
+
+/* FUTEX_WAKE_OP will perform atomically
+   int oldval = *(int *)UADDR2;
+   *(int *)UADDR2 = oldval OP OPARG;
+   if (oldval CMP CMPARG)
+     wake UADDR2;  */
+
+#define FUTEX_OP(op, oparg, cmp, cmparg) \
+  (((op & 0xf) << 28) | ((cmp & 0xf) << 24)		\
+   | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
+
+#endif /* _UAPI_LINUX_FUTEX_H */
diff --git a/include/uapi/linux/gameport.h b/include/uapi/linux/gameport.h
new file mode 100644
index 0000000000000000000000000000000000000000..49b29b068f405d155a06b910a815977c849a423f
--- /dev/null
+++ b/include/uapi/linux/gameport.h
@@ -0,0 +1,28 @@
+/*
+ *  Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_GAMEPORT_H
+#define _UAPI_GAMEPORT_H
+
+
+
+#define GAMEPORT_MODE_DISABLED		0
+#define GAMEPORT_MODE_RAW		1
+#define GAMEPORT_MODE_COOKED		2
+
+#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
+#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
+#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
+#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
+#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
+#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
+#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
+#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
+#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
+#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
+
+#endif /* _UAPI_GAMEPORT_H */
diff --git a/include/linux/gen_stats.h b/include/uapi/linux/gen_stats.h
similarity index 100%
rename from include/linux/gen_stats.h
rename to include/uapi/linux/gen_stats.h
diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h
new file mode 100644
index 0000000000000000000000000000000000000000..c880a417d8a93693874b76a3e364a203ed4d0a9c
--- /dev/null
+++ b/include/uapi/linux/genetlink.h
@@ -0,0 +1,84 @@
+#ifndef _UAPI__LINUX_GENERIC_NETLINK_H
+#define _UAPI__LINUX_GENERIC_NETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+#define GENL_NAMSIZ	16	/* length of family name */
+
+#define GENL_MIN_ID	NLMSG_MIN_TYPE
+#define GENL_MAX_ID	1023
+
+struct genlmsghdr {
+	__u8	cmd;
+	__u8	version;
+	__u16	reserved;
+};
+
+#define GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct genlmsghdr))
+
+#define GENL_ADMIN_PERM		0x01
+#define GENL_CMD_CAP_DO		0x02
+#define GENL_CMD_CAP_DUMP	0x04
+#define GENL_CMD_CAP_HASPOL	0x08
+
+/*
+ * List of reserved static generic netlink identifiers:
+ */
+#define GENL_ID_GENERATE	0
+#define GENL_ID_CTRL		NLMSG_MIN_TYPE
+
+/**************************************************************************
+ * Controller
+ **************************************************************************/
+
+enum {
+	CTRL_CMD_UNSPEC,
+	CTRL_CMD_NEWFAMILY,
+	CTRL_CMD_DELFAMILY,
+	CTRL_CMD_GETFAMILY,
+	CTRL_CMD_NEWOPS,
+	CTRL_CMD_DELOPS,
+	CTRL_CMD_GETOPS,
+	CTRL_CMD_NEWMCAST_GRP,
+	CTRL_CMD_DELMCAST_GRP,
+	CTRL_CMD_GETMCAST_GRP, /* unused */
+	__CTRL_CMD_MAX,
+};
+
+#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
+
+enum {
+	CTRL_ATTR_UNSPEC,
+	CTRL_ATTR_FAMILY_ID,
+	CTRL_ATTR_FAMILY_NAME,
+	CTRL_ATTR_VERSION,
+	CTRL_ATTR_HDRSIZE,
+	CTRL_ATTR_MAXATTR,
+	CTRL_ATTR_OPS,
+	CTRL_ATTR_MCAST_GROUPS,
+	__CTRL_ATTR_MAX,
+};
+
+#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
+
+enum {
+	CTRL_ATTR_OP_UNSPEC,
+	CTRL_ATTR_OP_ID,
+	CTRL_ATTR_OP_FLAGS,
+	__CTRL_ATTR_OP_MAX,
+};
+
+#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
+
+enum {
+	CTRL_ATTR_MCAST_GRP_UNSPEC,
+	CTRL_ATTR_MCAST_GRP_NAME,
+	CTRL_ATTR_MCAST_GRP_ID,
+	__CTRL_ATTR_MCAST_GRP_MAX,
+};
+
+#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
+
+
+#endif /* _UAPI__LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/gfs2_ondisk.h b/include/uapi/linux/gfs2_ondisk.h
similarity index 100%
rename from include/linux/gfs2_ondisk.h
rename to include/uapi/linux/gfs2_ondisk.h
diff --git a/include/linux/gigaset_dev.h b/include/uapi/linux/gigaset_dev.h
similarity index 100%
rename from include/linux/gigaset_dev.h
rename to include/uapi/linux/gigaset_dev.h
diff --git a/include/uapi/linux/hdlc.h b/include/uapi/linux/hdlc.h
new file mode 100644
index 0000000000000000000000000000000000000000..2c5f0aff4cf961ba9b36eaf92b5f422ce4606ffd
--- /dev/null
+++ b/include/uapi/linux/hdlc.h
@@ -0,0 +1,23 @@
+/*
+ * Generic HDLC support routines for Linux
+ *
+ * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI__HDLC_H
+#define _UAPI__HDLC_H
+
+
+#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
+#if 0
+#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
+#else
+#define HDLC_MAX_MRU 1600 /* as required for FR network */
+#endif
+
+
+#endif /* _UAPI__HDLC_H */
diff --git a/include/uapi/linux/hdlcdrv.h b/include/uapi/linux/hdlcdrv.h
new file mode 100644
index 0000000000000000000000000000000000000000..ffc79c0b44a888e5e995d28ff258fcaf5396b57d
--- /dev/null
+++ b/include/uapi/linux/hdlcdrv.h
@@ -0,0 +1,110 @@
+/*
+ * hdlcdrv.h  -- HDLC packet radio network driver.
+ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
+ * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _UAPI_HDLCDRV_H
+#define _UAPI_HDLCDRV_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct hdlcdrv_params {
+	int iobase;
+	int irq;
+	int dma;
+	int dma2;
+	int seriobase;
+	int pariobase;
+	int midiiobase;
+};	
+
+struct hdlcdrv_channel_params {
+	int tx_delay;  /* the transmitter keyup delay in 10ms units */
+	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
+	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
+	int ppersist;  /* the p-persistence 0..255 */
+	int fulldup;   /* some driver do not support full duplex, setting */
+	               /* this just makes them send even if DCD is on */
+};	
+
+struct hdlcdrv_old_channel_state {
+  	int ptt;
+  	int dcd;
+  	int ptt_keyed;
+};
+
+struct hdlcdrv_channel_state {
+ 	int ptt;
+ 	int dcd;
+ 	int ptt_keyed;
+ 	unsigned long tx_packets;
+ 	unsigned long tx_errors;
+ 	unsigned long rx_packets;
+ 	unsigned long rx_errors;
+};
+
+struct hdlcdrv_ioctl {
+	int cmd;
+	union {
+		struct hdlcdrv_params mp;
+		struct hdlcdrv_channel_params cp;
+		struct hdlcdrv_channel_state cs;
+		struct hdlcdrv_old_channel_state ocs;
+		unsigned int calibrate;
+		unsigned char bits;
+		char modename[128];
+		char drivername[32];
+	} data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values
+ */
+#define HDLCDRVCTL_GETMODEMPAR       0
+#define HDLCDRVCTL_SETMODEMPAR       1
+#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
+#define HDLCDRVCTL_GETCHANNELPAR    10
+#define HDLCDRVCTL_SETCHANNELPAR    11
+#define HDLCDRVCTL_OLDGETSTAT       20
+#define HDLCDRVCTL_CALIBRATE        21
+#define HDLCDRVCTL_GETSTAT          22
+
+/*
+ * these are mainly for debugging purposes
+ */
+#define HDLCDRVCTL_GETSAMPLES       30
+#define HDLCDRVCTL_GETBITS          31
+
+/*
+ * not handled by hdlcdrv, but by its depending drivers
+ */
+#define HDLCDRVCTL_GETMODE          40
+#define HDLCDRVCTL_SETMODE          41
+#define HDLCDRVCTL_MODELIST         42
+#define HDLCDRVCTL_DRIVERNAME       43
+
+/*
+ * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
+ */
+#define HDLCDRV_PARMASK_IOBASE      (1<<0)
+#define HDLCDRV_PARMASK_IRQ         (1<<1)
+#define HDLCDRV_PARMASK_DMA         (1<<2)
+#define HDLCDRV_PARMASK_DMA2        (1<<3)
+#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
+#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
+#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
+
+/* -------------------------------------------------------------------- */
+
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _UAPI_HDLCDRV_H */
+
+/* -------------------------------------------------------------------- */
diff --git a/include/linux/hdreg.h b/include/uapi/linux/hdreg.h
similarity index 100%
rename from include/linux/hdreg.h
rename to include/uapi/linux/hdreg.h
diff --git a/include/uapi/linux/hid.h b/include/uapi/linux/hid.h
new file mode 100644
index 0000000000000000000000000000000000000000..b60f4842bd97f215cffd4b1f7ec1e70269ea471d
--- /dev/null
+++ b/include/uapi/linux/hid.h
@@ -0,0 +1,66 @@
+/*
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI__HID_H
+#define _UAPI__HID_H
+
+
+
+/*
+ * USB HID (Human Interface Device) interface class code
+ */
+
+#define USB_INTERFACE_CLASS_HID		3
+
+/*
+ * USB HID interface subclass and protocol codes
+ */
+
+#define USB_INTERFACE_SUBCLASS_BOOT	1
+#define USB_INTERFACE_PROTOCOL_KEYBOARD	1
+#define USB_INTERFACE_PROTOCOL_MOUSE	2
+
+/*
+ * HID class requests
+ */
+
+#define HID_REQ_GET_REPORT		0x01
+#define HID_REQ_GET_IDLE		0x02
+#define HID_REQ_GET_PROTOCOL		0x03
+#define HID_REQ_SET_REPORT		0x09
+#define HID_REQ_SET_IDLE		0x0A
+#define HID_REQ_SET_PROTOCOL		0x0B
+
+/*
+ * HID class descriptor types
+ */
+
+#define HID_DT_HID			(USB_TYPE_CLASS | 0x01)
+#define HID_DT_REPORT			(USB_TYPE_CLASS | 0x02)
+#define HID_DT_PHYSICAL			(USB_TYPE_CLASS | 0x03)
+
+#define HID_MAX_DESCRIPTOR_SIZE		4096
+
+
+#endif /* _UAPI__HID_H */
diff --git a/include/uapi/linux/hiddev.h b/include/uapi/linux/hiddev.h
new file mode 100644
index 0000000000000000000000000000000000000000..7df7884bf5c47e936c9ce24a813ea7b6019f82c2
--- /dev/null
+++ b/include/uapi/linux/hiddev.h
@@ -0,0 +1,212 @@
+/*
+ *  Copyright (c) 1999-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI_HIDDEV_H
+#define _UAPI_HIDDEV_H
+
+
+
+#include <linux/types.h>
+
+/*
+ * The event structure itself
+ */
+
+struct hiddev_event {
+	unsigned hid;
+	signed int value;
+};
+
+struct hiddev_devinfo {
+	__u32 bustype;
+	__u32 busnum;
+	__u32 devnum;
+	__u32 ifnum;
+	__s16 vendor;
+	__s16 product;
+	__s16 version;
+	__u32 num_applications;
+};
+
+struct hiddev_collection_info {
+	__u32 index;
+	__u32 type;
+	__u32 usage;
+	__u32 level;
+};
+
+#define HID_STRING_SIZE 256
+struct hiddev_string_descriptor {
+	__s32 index;
+	char value[HID_STRING_SIZE];
+};
+
+struct hiddev_report_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 num_fields;
+};
+
+/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
+ * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
+ * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
+ * successful GUSAGE call to save time.  To actually send a value to the
+ * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
+ * GREPORT isn't necessary for a GUSAGE to return valid data.
+ */
+#define HID_REPORT_ID_UNKNOWN 0xffffffff
+#define HID_REPORT_ID_FIRST   0x00000100
+#define HID_REPORT_ID_NEXT    0x00000200
+#define HID_REPORT_ID_MASK    0x000000ff
+#define HID_REPORT_ID_MAX     0x000000ff
+
+#define HID_REPORT_TYPE_INPUT	1
+#define HID_REPORT_TYPE_OUTPUT	2
+#define HID_REPORT_TYPE_FEATURE	3
+#define HID_REPORT_TYPE_MIN     1
+#define HID_REPORT_TYPE_MAX     3
+
+struct hiddev_field_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 maxusage;
+	__u32 flags;
+	__u32 physical;		/* physical usage for this field */
+	__u32 logical;		/* logical usage for this field */
+	__u32 application;		/* application usage for this field */
+	__s32 logical_minimum;
+	__s32 logical_maximum;
+	__s32 physical_minimum;
+	__s32 physical_maximum;
+	__u32 unit_exponent;
+	__u32 unit;
+};
+
+/* Fill in report_type, report_id and field_index to get the information on a
+ * field.
+ */
+#define HID_FIELD_CONSTANT		0x001
+#define HID_FIELD_VARIABLE		0x002
+#define HID_FIELD_RELATIVE		0x004
+#define HID_FIELD_WRAP			0x008	
+#define HID_FIELD_NONLINEAR		0x010
+#define HID_FIELD_NO_PREFERRED		0x020
+#define HID_FIELD_NULL_STATE		0x040
+#define HID_FIELD_VOLATILE		0x080
+#define HID_FIELD_BUFFERED_BYTE		0x100
+
+struct hiddev_usage_ref {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 usage_index;
+	__u32 usage_code;
+	__s32 value;
+};
+
+/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
+ * It really manifests itself as setting the value of consecutive usages */
+#define HID_MAX_MULTI_USAGES 1024
+struct hiddev_usage_ref_multi {
+	struct hiddev_usage_ref uref;
+	__u32 num_values;
+	__s32 values[HID_MAX_MULTI_USAGES];
+};
+
+/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
+ * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
+ * been sent by the device 
+ */
+#define HID_FIELD_INDEX_NONE 0xffffffff
+
+/*
+ * Protocol version.
+ */
+
+#define HID_VERSION		0x010004
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+#define HIDIOCGVERSION		_IOR('H', 0x01, int)
+#define HIDIOCAPPLICATION	_IO('H', 0x02)
+#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
+#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
+#define HIDIOCINITREPORT	_IO('H', 0x05)
+#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
+#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
+#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
+#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
+#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
+#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
+#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
+#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
+#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
+#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
+#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
+#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
+
+/* For writing/reading to multiple/consecutive usages */
+#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
+#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
+
+/* 
+ * Flags to be used in HIDIOCSFLAG
+ */
+#define HIDDEV_FLAG_UREF	0x1
+#define HIDDEV_FLAG_REPORT	0x2
+#define HIDDEV_FLAGS		0x3
+
+/* To traverse the input report descriptor info for a HID device, perform the 
+ * following:
+ *
+ * rinfo.report_type = HID_REPORT_TYPE_INPUT;
+ * rinfo.report_id = HID_REPORT_ID_FIRST;
+ * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ *
+ * while (ret >= 0) {
+ * 	for (i = 0; i < rinfo.num_fields; i++) {
+ * 		finfo.report_type = rinfo.report_type;
+ * 		finfo.report_id = rinfo.report_id;
+ * 		finfo.field_index = i;
+ * 		ioctl(fd, HIDIOCGFIELDINFO, &finfo);
+ * 		for (j = 0; j < finfo.maxusage; j++) {
+ * 			uref.report_type = rinfo.report_type;
+ * 			uref.report_id = rinfo.report_id;
+ * 			uref.field_index = i;
+ * 			uref.usage_index = j;
+ * 			ioctl(fd, HIDIOCGUCODE, &uref);
+ * 			ioctl(fd, HIDIOCGUSAGE, &uref);
+ * 		}
+ * 	}
+ * 	rinfo.report_id |= HID_REPORT_ID_NEXT;
+ * 	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ * }
+ */
+
+
+#endif /* _UAPI_HIDDEV_H */
diff --git a/include/uapi/linux/hidraw.h b/include/uapi/linux/hidraw.h
new file mode 100644
index 0000000000000000000000000000000000000000..f5b732979a7c99ddc44c88febe4eb4487abb321e
--- /dev/null
+++ b/include/uapi/linux/hidraw.h
@@ -0,0 +1,50 @@
+/*
+ *  Copyright (c) 2007 Jiri Kosina
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef _UAPI_HIDRAW_H
+#define _UAPI_HIDRAW_H
+
+
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+struct hidraw_report_descriptor {
+	__u32 size;
+	__u8 value[HID_MAX_DESCRIPTOR_SIZE];
+};
+
+struct hidraw_devinfo {
+	__u32 bustype;
+	__s16 vendor;
+	__s16 product;
+};
+
+/* ioctl interface */
+#define HIDIOCGRDESCSIZE	_IOR('H', 0x01, int)
+#define HIDIOCGRDESC		_IOR('H', 0x02, struct hidraw_report_descriptor)
+#define HIDIOCGRAWINFO		_IOR('H', 0x03, struct hidraw_devinfo)
+#define HIDIOCGRAWNAME(len)     _IOC(_IOC_READ, 'H', 0x04, len)
+#define HIDIOCGRAWPHYS(len)     _IOC(_IOC_READ, 'H', 0x05, len)
+/* The first byte of SFEATURE and GFEATURE is the report number */
+#define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
+
+#define HIDRAW_FIRST_MINOR 0
+#define HIDRAW_MAX_DEVICES 64
+/* number of reports to buffer */
+#define HIDRAW_BUFFER_SIZE 64
+
+
+/* kernel-only API declarations */
+
+#endif /* _UAPI_HIDRAW_H */
diff --git a/include/uapi/linux/hpet.h b/include/uapi/linux/hpet.h
new file mode 100644
index 0000000000000000000000000000000000000000..8af3c70abc8c7e931f6e1103583d8d6391b31507
--- /dev/null
+++ b/include/uapi/linux/hpet.h
@@ -0,0 +1,25 @@
+#ifndef _UAPI__HPET__
+#define _UAPI__HPET__
+
+#include <linux/compiler.h>
+
+
+struct hpet_info {
+	unsigned long hi_ireqfreq;	/* Hz */
+	unsigned long hi_flags;	/* information */
+	unsigned short hi_hpet;
+	unsigned short hi_timer;
+};
+
+#define HPET_INFO_PERIODIC	0x0010	/* periodic-capable comparator */
+
+#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
+#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
+#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
+#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
+#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
+#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
+
+#define MAX_HPET_TBS	8		/* maximum hpet timer blocks */
+
+#endif /* _UAPI__HPET__ */
diff --git a/include/linux/hysdn_if.h b/include/uapi/linux/hysdn_if.h
similarity index 100%
rename from include/linux/hysdn_if.h
rename to include/uapi/linux/hysdn_if.h
diff --git a/include/uapi/linux/i2c-dev.h b/include/uapi/linux/i2c-dev.h
new file mode 100644
index 0000000000000000000000000000000000000000..3f311551795dad6a1b397bc8a858fb31613eac4d
--- /dev/null
+++ b/include/uapi/linux/i2c-dev.h
@@ -0,0 +1,72 @@
+/*
+    i2c-dev.h - i2c-bus driver, char device interface
+
+    Copyright (C) 1995-97 Simon G. Vogl
+    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.
+*/
+
+#ifndef _UAPI_LINUX_I2C_DEV_H
+#define _UAPI_LINUX_I2C_DEV_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
+ * unsigned long, except for:
+ *	- I2C_FUNCS, takes pointer to an unsigned long
+ *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
+ *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
+ */
+#define I2C_RETRIES	0x0701	/* number of times a device address should
+				   be polled when not acknowledging */
+#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
+
+/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+ * are NOT supported! (due to code brokenness)
+ */
+#define I2C_SLAVE	0x0703	/* Use this slave address */
+#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
+				   is already in use by a driver! */
+#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
+
+#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
+
+#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
+
+#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
+#define I2C_SMBUS	0x0720	/* SMBus transfer */
+
+
+/* This is the structure as used in the I2C_SMBUS ioctl call */
+struct i2c_smbus_ioctl_data {
+	__u8 read_write;
+	__u8 command;
+	__u32 size;
+	union i2c_smbus_data __user *data;
+};
+
+/* This is the structure as used in the I2C_RDWR ioctl call */
+struct i2c_rdwr_ioctl_data {
+	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
+	__u32 nmsgs;			/* number of i2c_msgs */
+};
+
+#define  I2C_RDRW_IOCTL_MAX_MSGS	42
+
+
+#endif /* _UAPI_LINUX_I2C_DEV_H */
diff --git a/include/uapi/linux/i2c.h b/include/uapi/linux/i2c.h
new file mode 100644
index 0000000000000000000000000000000000000000..0e949cbfd333388fc12d42bcf26e91a2cf1524cf
--- /dev/null
+++ b/include/uapi/linux/i2c.h
@@ -0,0 +1,151 @@
+/* ------------------------------------------------------------------------- */
+/*									     */
+/* i2c.h - definitions for the i2c-bus interface			     */
+/*									     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.							     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+   Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef _UAPI_LINUX_I2C_H
+#define _UAPI_LINUX_I2C_H
+
+#include <linux/types.h>
+
+/**
+ * struct i2c_msg - an I2C transaction segment beginning with START
+ * @addr: Slave address, either seven or ten bits.  When this is a ten
+ *	bit address, I2C_M_TEN must be set in @flags and the adapter
+ *	must support I2C_FUNC_10BIT_ADDR.
+ * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
+ *	provided unless the adapter exported the relevant I2C_FUNC_*
+ *	flags through i2c_check_functionality().
+ * @len: Number of data bytes in @buf being read from or written to the
+ *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
+ *	is set, the caller guarantees that this buffer can hold up to
+ *	32 bytes in addition to the initial length byte sent by the
+ *	slave (plus, if used, the SMBus PEC); and this value will be
+ *	incremented by the number of block data bytes received.
+ * @buf: The buffer into which data is read, or from which it's written.
+ *
+ * An i2c_msg is the low level representation of one segment of an I2C
+ * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
+ * to userspace from i2c-dev, and to I2C adapter drivers through the
+ * @i2c_adapter.@master_xfer() method.
+ *
+ * Except when I2C "protocol mangling" is used, all I2C adapters implement
+ * the standard rules for I2C transactions.  Each transaction begins with a
+ * START.  That is followed by the slave address, and a bit encoding read
+ * versus write.  Then follow all the data bytes, possibly including a byte
+ * with SMBus PEC.  The transfer terminates with a NAK, or when all those
+ * bytes have been transferred and ACKed.  If this is the last message in a
+ * group, it is followed by a STOP.  Otherwise it is followed by the next
+ * @i2c_msg transaction segment, beginning with a (repeated) START.
+ *
+ * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
+ * passing certain @flags may have changed those standard protocol behaviors.
+ * Those flags are only for use with broken/nonconforming slaves, and with
+ * adapters which are known to support the specific mangling options they
+ * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
+ */
+struct i2c_msg {
+	__u16 addr;	/* slave address			*/
+	__u16 flags;
+#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
+#define I2C_M_RD		0x0001	/* read data, from slave to master */
+#define I2C_M_STOP		0x8000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_NOSTART */
+#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
+	__u16 len;		/* msg length				*/
+	__u8 *buf;		/* pointer to msg data			*/
+};
+
+/* To determine what functionality is present */
+
+#define I2C_FUNC_I2C			0x00000001
+#define I2C_FUNC_10BIT_ADDR		0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_IGNORE_NAK etc. */
+#define I2C_FUNC_SMBUS_PEC		0x00000008
+#define I2C_FUNC_NOSTART		0x00000010 /* I2C_M_NOSTART */
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_QUICK		0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
+
+#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
+					 I2C_FUNC_SMBUS_BYTE | \
+					 I2C_FUNC_SMBUS_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WORD_DATA | \
+					 I2C_FUNC_SMBUS_PROC_CALL | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_PEC)
+
+/*
+ * Data for SMBus Messages
+ */
+#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
+union i2c_smbus_data {
+	__u8 byte;
+	__u16 word;
+	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+			       /* and one more for user-space compatibility */
+};
+
+/* i2c_smbus_xfer read or write markers */
+#define I2C_SMBUS_READ	1
+#define I2C_SMBUS_WRITE	0
+
+/* SMBus transaction types (size parameter in the above functions)
+   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK		    0
+#define I2C_SMBUS_BYTE		    1
+#define I2C_SMBUS_BYTE_DATA	    2
+#define I2C_SMBUS_WORD_DATA	    3
+#define I2C_SMBUS_PROC_CALL	    4
+#define I2C_SMBUS_BLOCK_DATA	    5
+#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
+#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA    8
+
+#endif /* _UAPI_LINUX_I2C_H */
diff --git a/include/linux/i2o-dev.h b/include/uapi/linux/i2o-dev.h
similarity index 100%
rename from include/linux/i2o-dev.h
rename to include/uapi/linux/i2o-dev.h
diff --git a/include/linux/i8k.h b/include/uapi/linux/i8k.h
similarity index 100%
rename from include/linux/i8k.h
rename to include/uapi/linux/i8k.h
diff --git a/include/uapi/linux/icmp.h b/include/uapi/linux/icmp.h
new file mode 100644
index 0000000000000000000000000000000000000000..16fff055f734d06fb4659e6c04dc3039501056f2
--- /dev/null
+++ b/include/uapi/linux/icmp.h
@@ -0,0 +1,97 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the ICMP protocol.
+ *
+ * Version:	@(#)icmp.h	1.0.3	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_ICMP_H
+#define _UAPI_LINUX_ICMP_H
+
+#include <linux/types.h>
+
+#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
+#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
+#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
+#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
+#define ICMP_ECHO		8	/* Echo Request			*/
+#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
+#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
+#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
+#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
+#define ICMP_INFO_REQUEST	15	/* Information Request		*/
+#define ICMP_INFO_REPLY		16	/* Information Reply		*/
+#define ICMP_ADDRESS		17	/* Address Mask Request		*/
+#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
+#define NR_ICMP_TYPES		18
+
+
+/* Codes for UNREACH. */
+#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
+#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
+#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
+#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
+#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
+#define ICMP_SR_FAILED		5	/* Source Route failed		*/
+#define ICMP_NET_UNKNOWN	6
+#define ICMP_HOST_UNKNOWN	7
+#define ICMP_HOST_ISOLATED	8
+#define ICMP_NET_ANO		9
+#define ICMP_HOST_ANO		10
+#define ICMP_NET_UNR_TOS	11
+#define ICMP_HOST_UNR_TOS	12
+#define ICMP_PKT_FILTERED	13	/* Packet filtered */
+#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
+#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
+#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
+
+/* Codes for REDIRECT. */
+#define ICMP_REDIR_NET		0	/* Redirect Net			*/
+#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
+#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
+#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
+
+/* Codes for TIME_EXCEEDED. */
+#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
+#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
+
+
+struct icmphdr {
+  __u8		type;
+  __u8		code;
+  __sum16	checksum;
+  union {
+	struct {
+		__be16	id;
+		__be16	sequence;
+	} echo;
+	__be32	gateway;
+	struct {
+		__be16	__unused;
+		__be16	mtu;
+	} frag;
+  } un;
+};
+
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMP_FILTER			1
+
+struct icmp_filter {
+	__u32		data;
+};
+
+
+#endif /* _UAPI_LINUX_ICMP_H */
diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h
new file mode 100644
index 0000000000000000000000000000000000000000..e0133c73c30409fd29b1a9ada5ccb6a9118fb2f5
--- /dev/null
+++ b/include/uapi/linux/icmpv6.h
@@ -0,0 +1,164 @@
+#ifndef _UAPI_LINUX_ICMPV6_H
+#define _UAPI_LINUX_ICMPV6_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct icmp6hdr {
+
+	__u8		icmp6_type;
+	__u8		icmp6_code;
+	__sum16		icmp6_cksum;
+
+
+	union {
+		__be32			un_data32[1];
+		__be16			un_data16[2];
+		__u8			un_data8[4];
+
+		struct icmpv6_echo {
+			__be16		identifier;
+			__be16		sequence;
+		} u_echo;
+
+                struct icmpv6_nd_advt {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+                        __u32		reserved:5,
+                        		override:1,
+                        		solicited:1,
+                        		router:1,
+					reserved2:24;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+                        __u32		router:1,
+					solicited:1,
+                        		override:1,
+                        		reserved:29;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif						
+                } u_nd_advt;
+
+                struct icmpv6_nd_ra {
+			__u8		hop_limit;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+			__u8		reserved:3,
+					router_pref:2,
+					home_agent:1,
+					other:1,
+					managed:1;
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+			__u8		managed:1,
+					other:1,
+					home_agent:1,
+					router_pref:2,
+					reserved:3;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+			__be16		rt_lifetime;
+                } u_nd_ra;
+
+	} icmp6_dataun;
+
+#define icmp6_identifier	icmp6_dataun.u_echo.identifier
+#define icmp6_sequence		icmp6_dataun.u_echo.sequence
+#define icmp6_pointer		icmp6_dataun.un_data32[0]
+#define icmp6_mtu		icmp6_dataun.un_data32[0]
+#define icmp6_unused		icmp6_dataun.un_data32[0]
+#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
+#define icmp6_router		icmp6_dataun.u_nd_advt.router
+#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
+#define icmp6_override		icmp6_dataun.u_nd_advt.override
+#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
+#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
+#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
+#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
+#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
+#define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
+};
+
+
+#define ICMPV6_ROUTER_PREF_LOW		0x3
+#define ICMPV6_ROUTER_PREF_MEDIUM	0x0
+#define ICMPV6_ROUTER_PREF_HIGH		0x1
+#define ICMPV6_ROUTER_PREF_INVALID	0x2
+
+#define ICMPV6_DEST_UNREACH		1
+#define ICMPV6_PKT_TOOBIG		2
+#define ICMPV6_TIME_EXCEED		3
+#define ICMPV6_PARAMPROB		4
+
+#define ICMPV6_INFOMSG_MASK		0x80
+
+#define ICMPV6_ECHO_REQUEST		128
+#define ICMPV6_ECHO_REPLY		129
+#define ICMPV6_MGM_QUERY		130
+#define ICMPV6_MGM_REPORT       	131
+#define ICMPV6_MGM_REDUCTION    	132
+
+#define ICMPV6_NI_QUERY			139
+#define ICMPV6_NI_REPLY			140
+
+#define ICMPV6_MLD2_REPORT		143
+
+#define ICMPV6_DHAAD_REQUEST		144
+#define ICMPV6_DHAAD_REPLY		145
+#define ICMPV6_MOBILE_PREFIX_SOL	146
+#define ICMPV6_MOBILE_PREFIX_ADV	147
+
+/*
+ *	Codes for Destination Unreachable
+ */
+#define ICMPV6_NOROUTE			0
+#define ICMPV6_ADM_PROHIBITED		1
+#define ICMPV6_NOT_NEIGHBOUR		2
+#define ICMPV6_ADDR_UNREACH		3
+#define ICMPV6_PORT_UNREACH		4
+
+/*
+ *	Codes for Time Exceeded
+ */
+#define ICMPV6_EXC_HOPLIMIT		0
+#define ICMPV6_EXC_FRAGTIME		1
+
+/*
+ *	Codes for Parameter Problem
+ */
+#define ICMPV6_HDR_FIELD		0
+#define ICMPV6_UNK_NEXTHDR		1
+#define ICMPV6_UNK_OPTION		2
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMPV6_FILTER			1
+
+/*
+ *	ICMPV6 filter
+ */
+
+#define ICMPV6_FILTER_BLOCK		1
+#define ICMPV6_FILTER_PASS		2
+#define ICMPV6_FILTER_BLOCKOTHERS	3
+#define ICMPV6_FILTER_PASSONLY		4
+
+struct icmp6_filter {
+	__u32		data[8];
+};
+
+/*
+ *	Definitions for MLDv2
+ */
+#define MLD2_MODE_IS_INCLUDE	1
+#define MLD2_MODE_IS_EXCLUDE	2
+#define MLD2_CHANGE_TO_INCLUDE	3
+#define MLD2_CHANGE_TO_EXCLUDE	4
+#define MLD2_ALLOW_NEW_SOURCES	5
+#define MLD2_BLOCK_OLD_SOURCES	6
+
+#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
+
+
+#endif /* _UAPI_LINUX_ICMPV6_H */
diff --git a/include/linux/if.h b/include/uapi/linux/if.h
similarity index 100%
rename from include/linux/if.h
rename to include/uapi/linux/if.h
diff --git a/include/linux/if_addr.h b/include/uapi/linux/if_addr.h
similarity index 100%
rename from include/linux/if_addr.h
rename to include/uapi/linux/if_addr.h
diff --git a/include/linux/if_addrlabel.h b/include/uapi/linux/if_addrlabel.h
similarity index 100%
rename from include/linux/if_addrlabel.h
rename to include/uapi/linux/if_addrlabel.h
diff --git a/include/linux/if_alg.h b/include/uapi/linux/if_alg.h
similarity index 100%
rename from include/linux/if_alg.h
rename to include/uapi/linux/if_alg.h
diff --git a/include/linux/if_arcnet.h b/include/uapi/linux/if_arcnet.h
similarity index 100%
rename from include/linux/if_arcnet.h
rename to include/uapi/linux/if_arcnet.h
diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h
new file mode 100644
index 0000000000000000000000000000000000000000..82c7d1bdadeb3d853ad4e33e51bc3fa8962c7d82
--- /dev/null
+++ b/include/uapi/linux/if_arp.h
@@ -0,0 +1,159 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ARP (RFC 826) protocol.
+ *
+ * Version:	@(#)if_arp.h	1.0.1	04/16/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ *		Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source.
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Florian La Roche,
+ *		Jonathan Layes <layes@loran.com>
+ *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IF_ARP_H
+#define _UAPI_LINUX_IF_ARP_H
+
+#include <linux/netdevice.h>
+
+/* ARP protocol HARDWARE identifiers. */
+#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
+#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
+#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
+#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
+#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
+#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
+#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
+#define	ARPHRD_ARCNET	7		/* ARCnet			*/
+#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
+#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
+#define ARPHRD_ATM	19		/* ATM 				*/
+#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
+#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
+#define ARPHRD_EUI64	27		/* EUI-64                       */
+#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
+
+/* Dummy types for non ARP hardware */
+#define ARPHRD_SLIP	256
+#define ARPHRD_CSLIP	257
+#define ARPHRD_SLIP6	258
+#define ARPHRD_CSLIP6	259
+#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
+#define ARPHRD_ADAPT	264
+#define ARPHRD_ROSE	270
+#define ARPHRD_X25	271		/* CCITT X.25			*/
+#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
+#define ARPHRD_CAN	280		/* Controller Area Network      */
+#define ARPHRD_PPP	512
+#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
+#define ARPHRD_HDLC	ARPHRD_CISCO
+#define ARPHRD_LAPB	516		/* LAPB				*/
+#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
+#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
+
+#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
+#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
+#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
+#define ARPHRD_SKIP	771		/* SKIP vif			*/
+#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
+#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
+#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
+#define ARPHRD_BIF      775             /* AP1000 BIF                   */
+#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
+#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
+#define ARPHRD_IPGRE	778		/* GRE over IP			*/
+#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
+#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
+#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
+#define ARPHRD_ECONET	782		/* Acorn Econet			*/
+#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
+/* ARP works differently on different FC media .. so  */
+#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
+#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
+#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
+#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
+	/* 787->799 reserved for fibrechannel media types */
+#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
+#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
+#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
+#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
+#define ARPHRD_IEEE802154	  804
+#define ARPHRD_IEEE802154_MONITOR 805	/* IEEE 802.15.4 network monitor */
+
+#define ARPHRD_PHONET	820		/* PhoNet media type		*/
+#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
+#define ARPHRD_CAIF	822		/* CAIF media type		*/
+#define ARPHRD_IP6GRE	823		/* GRE over IPv6		*/
+
+#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
+#define ARPHRD_NONE	  0xFFFE	/* zero header length */
+
+/* ARP protocol opcodes. */
+#define	ARPOP_REQUEST	1		/* ARP request			*/
+#define	ARPOP_REPLY	2		/* ARP reply			*/
+#define	ARPOP_RREQUEST	3		/* RARP request			*/
+#define	ARPOP_RREPLY	4		/* RARP reply			*/
+#define	ARPOP_InREQUEST	8		/* InARP request		*/
+#define	ARPOP_InREPLY	9		/* InARP reply			*/
+#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
+
+
+/* ARP ioctl request. */
+struct arpreq {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+  char			arp_dev[16];
+};
+
+struct arpreq_old {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+};
+
+/* ARP Flag values. */
+#define ATF_COM		0x02		/* completed entry (ha valid)	*/
+#define	ATF_PERM	0x04		/* permanent entry		*/
+#define	ATF_PUBL	0x08		/* publish entry		*/
+#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
+#define ATF_NETMASK     0x20            /* want to use a netmask (only
+					   for proxy entries) */
+#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
+
+/*
+ *	This structure defines an ethernet arp header.
+ */
+
+struct arphdr {
+	__be16		ar_hrd;		/* format of hardware address	*/
+	__be16		ar_pro;		/* format of protocol address	*/
+	unsigned char	ar_hln;		/* length of hardware address	*/
+	unsigned char	ar_pln;		/* length of protocol address	*/
+	__be16		ar_op;		/* ARP opcode (command)		*/
+
+#if 0
+	 /*
+	  *	 Ethernet looks like this : This bit is variable sized however...
+	  */
+	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
+	unsigned char		ar_sip[4];		/* sender IP address		*/
+	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
+	unsigned char		ar_tip[4];		/* target IP address		*/
+#endif
+
+};
+
+
+#endif /* _UAPI_LINUX_IF_ARP_H */
diff --git a/include/linux/if_bonding.h b/include/uapi/linux/if_bonding.h
similarity index 100%
rename from include/linux/if_bonding.h
rename to include/uapi/linux/if_bonding.h
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
new file mode 100644
index 0000000000000000000000000000000000000000..a8fe9549ddbc65f068bcb992cc16f4a734428b27
--- /dev/null
+++ b/include/uapi/linux/if_bridge.h
@@ -0,0 +1,101 @@
+/*
+ *	Linux ethernet bridge
+ *
+ *	Authors:
+ *	Lennert Buytenhek		<buytenh@gnu.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_BRIDGE_H
+#define _UAPI_LINUX_IF_BRIDGE_H
+
+#include <linux/types.h>
+
+#define SYSFS_BRIDGE_ATTR	"bridge"
+#define SYSFS_BRIDGE_FDB	"brforward"
+#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
+#define SYSFS_BRIDGE_PORT_ATTR	"brport"
+#define SYSFS_BRIDGE_PORT_LINK	"bridge"
+
+#define BRCTL_VERSION 1
+
+#define BRCTL_GET_VERSION 0
+#define BRCTL_GET_BRIDGES 1
+#define BRCTL_ADD_BRIDGE 2
+#define BRCTL_DEL_BRIDGE 3
+#define BRCTL_ADD_IF 4
+#define BRCTL_DEL_IF 5
+#define BRCTL_GET_BRIDGE_INFO 6
+#define BRCTL_GET_PORT_LIST 7
+#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
+#define BRCTL_SET_BRIDGE_HELLO_TIME 9
+#define BRCTL_SET_BRIDGE_MAX_AGE 10
+#define BRCTL_SET_AGEING_TIME 11
+#define BRCTL_SET_GC_INTERVAL 12
+#define BRCTL_GET_PORT_INFO 13
+#define BRCTL_SET_BRIDGE_STP_STATE 14
+#define BRCTL_SET_BRIDGE_PRIORITY 15
+#define BRCTL_SET_PORT_PRIORITY 16
+#define BRCTL_SET_PATH_COST 17
+#define BRCTL_GET_FDB_ENTRIES 18
+
+#define BR_STATE_DISABLED 0
+#define BR_STATE_LISTENING 1
+#define BR_STATE_LEARNING 2
+#define BR_STATE_FORWARDING 3
+#define BR_STATE_BLOCKING 4
+
+struct __bridge_info {
+	__u64 designated_root;
+	__u64 bridge_id;
+	__u32 root_path_cost;
+	__u32 max_age;
+	__u32 hello_time;
+	__u32 forward_delay;
+	__u32 bridge_max_age;
+	__u32 bridge_hello_time;
+	__u32 bridge_forward_delay;
+	__u8 topology_change;
+	__u8 topology_change_detected;
+	__u8 root_port;
+	__u8 stp_enabled;
+	__u32 ageing_time;
+	__u32 gc_interval;
+	__u32 hello_timer_value;
+	__u32 tcn_timer_value;
+	__u32 topology_change_timer_value;
+	__u32 gc_timer_value;
+};
+
+struct __port_info {
+	__u64 designated_root;
+	__u64 designated_bridge;
+	__u16 port_id;
+	__u16 designated_port;
+	__u32 path_cost;
+	__u32 designated_cost;
+	__u8 state;
+	__u8 top_change_ack;
+	__u8 config_pending;
+	__u8 unused0;
+	__u32 message_age_timer_value;
+	__u32 forward_delay_timer_value;
+	__u32 hold_timer_value;
+};
+
+struct __fdb_entry {
+	__u8 mac_addr[6];
+	__u8 port_no;
+	__u8 is_local;
+	__u32 ageing_timer_value;
+	__u8 port_hi;
+	__u8 pad0;
+	__u16 unused;
+};
+
+
+#endif /* _UAPI_LINUX_IF_BRIDGE_H */
diff --git a/include/linux/if_cablemodem.h b/include/uapi/linux/if_cablemodem.h
similarity index 100%
rename from include/linux/if_cablemodem.h
rename to include/uapi/linux/if_cablemodem.h
diff --git a/include/uapi/linux/if_eql.h b/include/uapi/linux/if_eql.h
new file mode 100644
index 0000000000000000000000000000000000000000..06e818c9e7cb087642fd778380242bb4f3ac1c8f
--- /dev/null
+++ b/include/uapi/linux/if_eql.h
@@ -0,0 +1,54 @@
+/*
+ * Equalizer Load-balancer for serial network interfaces.
+ *
+ * (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU General Public License, incorporated herein by reference.
+ * 
+ * The author may be reached as simon@ncm.com, or C/O
+ *    NCM
+ *    Attn: Simon Janes
+ *    6803 Whittier Ave
+ *    McLean VA 22101
+ *    Phone: 1-703-847-0040 ext 103
+ */
+
+#ifndef _UAPI_LINUX_IF_EQL_H
+#define _UAPI_LINUX_IF_EQL_H
+
+#define EQL_DEFAULT_SLAVE_PRIORITY 28800
+#define EQL_DEFAULT_MAX_SLAVES     4
+#define EQL_DEFAULT_MTU            576
+#define EQL_DEFAULT_RESCHED_IVAL   HZ
+
+#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
+#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
+
+#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
+#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
+
+#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
+#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
+
+
+typedef struct master_config {
+	char	master_name[16];
+	int	max_slaves;
+	int	min_slaves;
+} master_config_t;
+
+typedef struct slave_config {
+	char	slave_name[16];
+	long	priority;
+} slave_config_t;
+
+typedef struct slaving_request {
+	char	slave_name[16];
+	long	priority;
+} slaving_request_t;
+
+
+#endif /* _UAPI_LINUX_IF_EQL_H */
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
new file mode 100644
index 0000000000000000000000000000000000000000..0343e1f0582c01bcd54425bbb551098951d3767b
--- /dev/null
+++ b/include/uapi/linux/if_ether.h
@@ -0,0 +1,135 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Ethernet IEEE 802.3 interface.
+ *
+ * Version:	@(#)if_ether.h	1.0.1a	02/08/94
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_ETHER_H
+#define _UAPI_LINUX_IF_ETHER_H
+
+#include <linux/types.h>
+
+/*
+ *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
+ *	and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define ETH_HLEN	14		/* Total octets in header.	 */
+#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
+#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
+#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
+
+/*
+ *	These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
+#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
+#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
+#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
+#define ETH_P_X25	0x0805		/* CCITT X.25			*/
+#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
+#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
+#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
+#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
+#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
+#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
+#define ETH_P_LAT       0x6004          /* DEC LAT                      */
+#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
+#define ETH_P_CUST      0x6006          /* DEC Customer use             */
+#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
+#define ETH_P_TEB	0x6558		/* Trans Ether Bridging		*/
+#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
+#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
+#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
+#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
+#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
+#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
+#define ETH_P_PAUSE	0x8808		/* IEEE Pause frames. See 802.3 31B */
+#define ETH_P_SLOW	0x8809		/* Slow Protocol. See 802.3ad 43B */
+#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
+					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
+#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
+#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
+#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
+#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
+#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
+#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
+#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
+					 * over Ethernet
+					 */
+#define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
+#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
+#define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
+#define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
+#define ETH_P_TIPC	0x88CA		/* TIPC 			*/
+#define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
+#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
+#define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+#define ETH_P_TDLS	0x890D          /* TDLS */
+#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
+#define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
+
+/*
+ *	Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
+#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
+#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
+#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
+#define ETH_P_SNAP	0x0005		/* Internal only		*/
+#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
+#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
+#define ETH_P_CAN	0x000C		/* CAN: Controller Area Network */
+#define ETH_P_CANFD	0x000D		/* CANFD: CAN flexible data rate*/
+#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
+#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
+#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
+#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
+#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
+#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
+#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
+#define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
+#define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
+#define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
+#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
+#define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
+
+/*
+ *	This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+	__be16		h_proto;		/* packet type ID field	*/
+} __attribute__((packed));
+
+
+#endif /* _UAPI_LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fc.h b/include/uapi/linux/if_fc.h
similarity index 100%
rename from include/linux/if_fc.h
rename to include/uapi/linux/if_fc.h
diff --git a/include/uapi/linux/if_fddi.h b/include/uapi/linux/if_fddi.h
new file mode 100644
index 0000000000000000000000000000000000000000..0d36909c3aefa27f26aaf60d1d356d462ae94d0e
--- /dev/null
+++ b/include/uapi/linux/if_fddi.h
@@ -0,0 +1,104 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ANSI FDDI interface.
+ *
+ * Version:	@(#)if_fddi.h	1.0.2	Sep 29 2004
+ *
+ * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		if_fddi.h is based on previous if_ether.h and if_tr.h work by
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Donald Becker, <becker@super.org>
+ *			Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *			Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *			Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IF_FDDI_H
+#define _UAPI_LINUX_IF_FDDI_H
+
+#include <linux/types.h>
+
+/*
+ *  Define max and min legal sizes.  The frame sizes do not include
+ *  4 byte FCS/CRC (frame check sequence).
+ */
+#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
+#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
+#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
+#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
+#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
+#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
+#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
+#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
+#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
+
+/* Define FDDI Frame Control (FC) Byte values */
+#define FDDI_FC_K_VOID					0x00	
+#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
+#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
+#define FDDI_FC_K_SMT_MIN				0x41
+#define FDDI_FC_K_SMT_MAX		   		0x4F
+#define FDDI_FC_K_MAC_MIN				0xC1
+#define FDDI_FC_K_MAC_MAX		  		0xCF	
+#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
+#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
+#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
+#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
+#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
+#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
+#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
+#define FDDI_FC_K_RESERVED_MIN			0x70
+#define FDDI_FC_K_RESERVED_MAX			0x7F
+
+/* Define LLC and SNAP constants */
+#define FDDI_EXTENDED_SAP	0xAA
+#define FDDI_UI_CMD			0x03
+
+/* Define 802.2 Type 1 header */
+struct fddi_8022_1_hdr {
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl;					/* control byte #1 */
+} __attribute__((packed));
+
+/* Define 802.2 Type 2 header */
+struct fddi_8022_2_hdr {
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl_1;					/* control byte #1 */
+	__u8	ctrl_2;					/* control byte #2 */
+} __attribute__((packed));
+
+/* Define 802.2 SNAP header */
+#define FDDI_K_OUI_LEN	3
+struct fddi_snap_hdr {
+	__u8	dsap;					/* always 0xAA */
+	__u8	ssap;					/* always 0xAA */
+	__u8	ctrl;					/* always 0x03 */
+	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
+	__be16	ethertype;				/* packet type ID field */
+} __attribute__((packed));
+
+/* Define FDDI LLC frame header */
+struct fddihdr {
+	__u8	fc;						/* frame control */
+	__u8	daddr[FDDI_K_ALEN];		/* destination address */
+	__u8	saddr[FDDI_K_ALEN];		/* source address */
+	union
+		{
+		struct fddi_8022_1_hdr		llc_8022_1;
+		struct fddi_8022_2_hdr		llc_8022_2;
+		struct fddi_snap_hdr		llc_snap;
+		} hdr;
+} __attribute__((packed));
+
+
+#endif /* _UAPI_LINUX_IF_FDDI_H */
diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h
new file mode 100644
index 0000000000000000000000000000000000000000..f25b08d5eb6b7776d842c61281edb8dd00f095f9
--- /dev/null
+++ b/include/uapi/linux/if_frad.h
@@ -0,0 +1,122 @@
+/*
+ * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
+ *		created for each DLCI associated with a FRAD.  The FRAD driver
+ *		is not truly a network device, but the lower level device
+ *		handler.  This allows other FRAD manufacturers to use the DLCI
+ *		code, including its RFC1490 encapsulation alongside the current
+ *		implementation for the Sangoma cards.
+ *
+ * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	changed structure defs (packed)
+ *					re-arranged flags
+ *					added DLCI_RET vars
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_FRAD_H_
+#define _UAPI_FRAD_H_
+
+#include <linux/if.h>
+
+/* Structures and constants associated with the DLCI device driver */
+
+struct dlci_add
+{
+   char  devname[IFNAMSIZ];
+   short dlci;
+};
+
+#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
+#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
+
+/* 
+ * These are related to the Sangoma SDLA and should remain in order. 
+ * Code within the SDLA module is based on the specifics of this 
+ * structure.  Change at your own peril.
+ */
+struct dlci_conf {
+   short flags;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+
+/* these are part of the status read */
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+
+/* add any new fields here above is a mirror of sdla_dlci_conf */
+};
+
+#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
+
+/* configuration flags for DLCI */
+#define DLCI_IGNORE_CIR_OUT	0x0001
+#define DLCI_ACCOUNT_CIR_IN	0x0002
+#define DLCI_BUFFER_IF		0x0008
+
+#define DLCI_VALID_FLAGS	0x000B
+
+/* defines for the actual Frame Relay hardware */
+#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
+#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
+
+#define FRAD_LAST_IOCTL	FRAD_SET_CONF
+
+/*
+ * Based on the setup for the Sangoma SDLA.  If changes are 
+ * necessary to this structure, a routine will need to be 
+ * added to that module to copy fields.
+ */
+struct frad_conf 
+{
+   short station;
+   short flags;
+   short kbaud;
+   short clocking;
+   short mtu;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+
+/* Add new fields here, above is a mirror of the sdla_conf */
+
+};
+
+#define FRAD_STATION_CPE	0x0000
+#define FRAD_STATION_NODE	0x0001
+
+#define FRAD_TX_IGNORE_CIR	0x0001
+#define FRAD_RX_ACCOUNT_CIR	0x0002
+#define FRAD_DROP_ABORTED	0x0004
+#define FRAD_BUFFERIF		0x0008
+#define FRAD_STATS		0x0010
+#define FRAD_MCI		0x0100
+#define FRAD_AUTODLCI		0x8000
+#define FRAD_VALID_FLAGS	0x811F
+
+#define FRAD_CLOCK_INT		0x0001
+#define FRAD_CLOCK_EXT		0x0000
+
+
+#endif /* _UAPI_FRAD_H_ */
diff --git a/include/linux/if_hippi.h b/include/uapi/linux/if_hippi.h
similarity index 100%
rename from include/linux/if_hippi.h
rename to include/uapi/linux/if_hippi.h
diff --git a/include/linux/if_infiniband.h b/include/uapi/linux/if_infiniband.h
similarity index 100%
rename from include/linux/if_infiniband.h
rename to include/uapi/linux/if_infiniband.h
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
new file mode 100644
index 0000000000000000000000000000000000000000..5c80cb11518bbe599e28c2c44ac57a03a9f18947
--- /dev/null
+++ b/include/uapi/linux/if_link.h
@@ -0,0 +1,429 @@
+#ifndef _UAPI_LINUX_IF_LINK_H
+#define _UAPI_LINUX_IF_LINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+/* This struct should be in sync with struct rtnl_link_stats64 */
+struct rtnl_link_stats {
+	__u32	rx_packets;		/* total packets received	*/
+	__u32	tx_packets;		/* total packets transmitted	*/
+	__u32	rx_bytes;		/* total bytes received 	*/
+	__u32	tx_bytes;		/* total bytes transmitted	*/
+	__u32	rx_errors;		/* bad packets received		*/
+	__u32	tx_errors;		/* packet transmit problems	*/
+	__u32	rx_dropped;		/* no space in linux buffers	*/
+	__u32	tx_dropped;		/* no space available in linux	*/
+	__u32	multicast;		/* multicast packets received	*/
+	__u32	collisions;
+
+	/* detailed rx_errors: */
+	__u32	rx_length_errors;
+	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u32	rx_frame_errors;	/* recv'd frame alignment error */
+	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u32	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u32	tx_aborted_errors;
+	__u32	tx_carrier_errors;
+	__u32	tx_fifo_errors;
+	__u32	tx_heartbeat_errors;
+	__u32	tx_window_errors;
+
+	/* for cslip etc */
+	__u32	rx_compressed;
+	__u32	tx_compressed;
+};
+
+/* The main device statistics structure */
+struct rtnl_link_stats64 {
+	__u64	rx_packets;		/* total packets received	*/
+	__u64	tx_packets;		/* total packets transmitted	*/
+	__u64	rx_bytes;		/* total bytes received 	*/
+	__u64	tx_bytes;		/* total bytes transmitted	*/
+	__u64	rx_errors;		/* bad packets received		*/
+	__u64	tx_errors;		/* packet transmit problems	*/
+	__u64	rx_dropped;		/* no space in linux buffers	*/
+	__u64	tx_dropped;		/* no space available in linux	*/
+	__u64	multicast;		/* multicast packets received	*/
+	__u64	collisions;
+
+	/* detailed rx_errors: */
+	__u64	rx_length_errors;
+	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u64	rx_frame_errors;	/* recv'd frame alignment error */
+	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u64	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u64	tx_aborted_errors;
+	__u64	tx_carrier_errors;
+	__u64	tx_fifo_errors;
+	__u64	tx_heartbeat_errors;
+	__u64	tx_window_errors;
+
+	/* for cslip etc */
+	__u64	rx_compressed;
+	__u64	tx_compressed;
+};
+
+/* The struct should be in sync with struct ifmap */
+struct rtnl_link_ifmap {
+	__u64	mem_start;
+	__u64	mem_end;
+	__u64	base_addr;
+	__u16	irq;
+	__u8	dma;
+	__u8	port;
+};
+
+/*
+ * IFLA_AF_SPEC
+ *   Contains nested attributes for address family specific attributes.
+ *   Each address family may create a attribute with the address family
+ *   number as type and create its own attribute structure in it.
+ *
+ *   Example:
+ *   [IFLA_AF_SPEC] = {
+ *       [AF_INET] = {
+ *           [IFLA_INET_CONF] = ...,
+ *       },
+ *       [AF_INET6] = {
+ *           [IFLA_INET6_FLAGS] = ...,
+ *           [IFLA_INET6_CONF] = ...,
+ *       }
+ *   }
+ */
+
+enum {
+	IFLA_UNSPEC,
+	IFLA_ADDRESS,
+	IFLA_BROADCAST,
+	IFLA_IFNAME,
+	IFLA_MTU,
+	IFLA_LINK,
+	IFLA_QDISC,
+	IFLA_STATS,
+	IFLA_COST,
+#define IFLA_COST IFLA_COST
+	IFLA_PRIORITY,
+#define IFLA_PRIORITY IFLA_PRIORITY
+	IFLA_MASTER,
+#define IFLA_MASTER IFLA_MASTER
+	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
+#define IFLA_WIRELESS IFLA_WIRELESS
+	IFLA_PROTINFO,		/* Protocol specific information for a link */
+#define IFLA_PROTINFO IFLA_PROTINFO
+	IFLA_TXQLEN,
+#define IFLA_TXQLEN IFLA_TXQLEN
+	IFLA_MAP,
+#define IFLA_MAP IFLA_MAP
+	IFLA_WEIGHT,
+#define IFLA_WEIGHT IFLA_WEIGHT
+	IFLA_OPERSTATE,
+	IFLA_LINKMODE,
+	IFLA_LINKINFO,
+#define IFLA_LINKINFO IFLA_LINKINFO
+	IFLA_NET_NS_PID,
+	IFLA_IFALIAS,
+	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
+	IFLA_VFINFO_LIST,
+	IFLA_STATS64,
+	IFLA_VF_PORTS,
+	IFLA_PORT_SELF,
+	IFLA_AF_SPEC,
+	IFLA_GROUP,		/* Group the device belongs to */
+	IFLA_NET_NS_FD,
+	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
+	IFLA_PROMISCUITY,	/* Promiscuity count: > 0 means acts PROMISC */
+#define IFLA_PROMISCUITY IFLA_PROMISCUITY
+	IFLA_NUM_TX_QUEUES,
+	IFLA_NUM_RX_QUEUES,
+	__IFLA_MAX
+};
+
+
+#define IFLA_MAX (__IFLA_MAX - 1)
+
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
+#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
+#endif
+
+enum {
+	IFLA_INET_UNSPEC,
+	IFLA_INET_CONF,
+	__IFLA_INET_MAX,
+};
+
+#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
+
+/* ifi_flags.
+
+   IFF_* flags.
+
+   The only change is:
+   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
+   more not changeable by user. They describe link media
+   characteristics and set by device driver.
+
+   Comments:
+   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
+   - If neither of these three flags are set;
+     the interface is NBMA.
+
+   - IFF_MULTICAST does not mean anything special:
+   multicasts can be used on all not-NBMA links.
+   IFF_MULTICAST means that this media uses special encapsulation
+   for multicast frames. Apparently, all IFF_POINTOPOINT and
+   IFF_BROADCAST devices are able to use multicasts too.
+ */
+
+/* IFLA_LINK.
+   For usual devices it is equal ifi_index.
+   If it is a "virtual interface" (f.e. tunnel), ifi_link
+   can point to real physical interface (f.e. for bandwidth calculations),
+   or maybe 0, what means, that real media is unknown (usual
+   for IPIP tunnels, when route to endpoint is allowed to change)
+ */
+
+/* Subtype attributes for IFLA_PROTINFO */
+enum {
+	IFLA_INET6_UNSPEC,
+	IFLA_INET6_FLAGS,	/* link flags			*/
+	IFLA_INET6_CONF,	/* sysctl parameters		*/
+	IFLA_INET6_STATS,	/* statistics			*/
+	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
+	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
+	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
+	__IFLA_INET6_MAX
+};
+
+#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
+
+struct ifla_cacheinfo {
+	__u32	max_reasm_len;
+	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
+	__u32	reachable_time;
+	__u32	retrans_time;
+};
+
+enum {
+	IFLA_INFO_UNSPEC,
+	IFLA_INFO_KIND,
+	IFLA_INFO_DATA,
+	IFLA_INFO_XSTATS,
+	__IFLA_INFO_MAX,
+};
+
+#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
+
+/* VLAN section */
+
+enum {
+	IFLA_VLAN_UNSPEC,
+	IFLA_VLAN_ID,
+	IFLA_VLAN_FLAGS,
+	IFLA_VLAN_EGRESS_QOS,
+	IFLA_VLAN_INGRESS_QOS,
+	__IFLA_VLAN_MAX,
+};
+
+#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
+
+struct ifla_vlan_flags {
+	__u32	flags;
+	__u32	mask;
+};
+
+enum {
+	IFLA_VLAN_QOS_UNSPEC,
+	IFLA_VLAN_QOS_MAPPING,
+	__IFLA_VLAN_QOS_MAX
+};
+
+#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
+
+struct ifla_vlan_qos_mapping {
+	__u32 from;
+	__u32 to;
+};
+
+/* MACVLAN section */
+enum {
+	IFLA_MACVLAN_UNSPEC,
+	IFLA_MACVLAN_MODE,
+	IFLA_MACVLAN_FLAGS,
+	__IFLA_MACVLAN_MAX,
+};
+
+#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
+
+enum macvlan_mode {
+	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
+	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
+	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
+	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
+};
+
+#define MACVLAN_FLAG_NOPROMISC	1
+
+/* VXLAN section */
+enum {
+	IFLA_VXLAN_UNSPEC,
+	IFLA_VXLAN_ID,
+	IFLA_VXLAN_GROUP,
+	IFLA_VXLAN_LINK,
+	IFLA_VXLAN_LOCAL,
+	IFLA_VXLAN_TTL,
+	IFLA_VXLAN_TOS,
+	IFLA_VXLAN_LEARNING,
+	IFLA_VXLAN_AGEING,
+	IFLA_VXLAN_LIMIT,
+	IFLA_VXLAN_PORT_RANGE,
+	__IFLA_VXLAN_MAX
+};
+#define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
+
+struct ifla_vxlan_port_range {
+	__be16	low;
+	__be16	high;
+};
+
+/* SR-IOV virtual function management section */
+
+enum {
+	IFLA_VF_INFO_UNSPEC,
+	IFLA_VF_INFO,
+	__IFLA_VF_INFO_MAX,
+};
+
+#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
+
+enum {
+	IFLA_VF_UNSPEC,
+	IFLA_VF_MAC,		/* Hardware queue specific attributes */
+	IFLA_VF_VLAN,
+	IFLA_VF_TX_RATE,	/* TX Bandwidth Allocation */
+	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
+	__IFLA_VF_MAX,
+};
+
+#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
+
+struct ifla_vf_mac {
+	__u32 vf;
+	__u8 mac[32]; /* MAX_ADDR_LEN */
+};
+
+struct ifla_vf_vlan {
+	__u32 vf;
+	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
+	__u32 qos;
+};
+
+struct ifla_vf_tx_rate {
+	__u32 vf;
+	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
+};
+
+struct ifla_vf_spoofchk {
+	__u32 vf;
+	__u32 setting;
+};
+
+/* VF ports management section
+ *
+ *	Nested layout of set/get msg is:
+ *
+ *		[IFLA_NUM_VF]
+ *		[IFLA_VF_PORTS]
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			...
+ *		[IFLA_PORT_SELF]
+ *			[IFLA_PORT_*], ...
+ */
+
+enum {
+	IFLA_VF_PORT_UNSPEC,
+	IFLA_VF_PORT,			/* nest */
+	__IFLA_VF_PORT_MAX,
+};
+
+#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
+
+enum {
+	IFLA_PORT_UNSPEC,
+	IFLA_PORT_VF,			/* __u32 */
+	IFLA_PORT_PROFILE,		/* string */
+	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
+	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
+	IFLA_PORT_HOST_UUID,		/* binary UUID */
+	IFLA_PORT_REQUEST,		/* __u8 */
+	IFLA_PORT_RESPONSE,		/* __u16, output only */
+	__IFLA_PORT_MAX,
+};
+
+#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
+
+#define PORT_PROFILE_MAX	40
+#define PORT_UUID_MAX		16
+#define PORT_SELF_VF		-1
+
+enum {
+	PORT_REQUEST_PREASSOCIATE = 0,
+	PORT_REQUEST_PREASSOCIATE_RR,
+	PORT_REQUEST_ASSOCIATE,
+	PORT_REQUEST_DISASSOCIATE,
+};
+
+enum {
+	PORT_VDP_RESPONSE_SUCCESS = 0,
+	PORT_VDP_RESPONSE_INVALID_FORMAT,
+	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_VDP_RESPONSE_UNUSED_VTID,
+	PORT_VDP_RESPONSE_VTID_VIOLATION,
+	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
+	PORT_VDP_RESPONSE_OUT_OF_SYNC,
+	/* 0x08-0xFF reserved for future VDP use */
+	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
+	PORT_PROFILE_RESPONSE_INPROGRESS,
+	PORT_PROFILE_RESPONSE_INVALID,
+	PORT_PROFILE_RESPONSE_BADSTATE,
+	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_PROFILE_RESPONSE_ERROR,
+};
+
+struct ifla_port_vsi {
+	__u8 vsi_mgr_id;
+	__u8 vsi_type_id[3];
+	__u8 vsi_type_version;
+	__u8 pad[3];
+};
+
+
+/* IPoIB section */
+
+enum {
+	IFLA_IPOIB_UNSPEC,
+	IFLA_IPOIB_PKEY,
+	IFLA_IPOIB_MODE,
+	IFLA_IPOIB_UMCAST,
+	__IFLA_IPOIB_MAX
+};
+
+enum {
+	IPOIB_MODE_DATAGRAM  = 0, /* using unreliable datagram QPs */
+	IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
+};
+
+#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
+
+#endif /* _UAPI_LINUX_IF_LINK_H */
diff --git a/include/uapi/linux/if_ltalk.h b/include/uapi/linux/if_ltalk.h
new file mode 100644
index 0000000000000000000000000000000000000000..b92c1fb6ac161f6560acf39dc5ae663bbe86a6fb
--- /dev/null
+++ b/include/uapi/linux/if_ltalk.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI__LINUX_LTALK_H
+#define _UAPI__LINUX_LTALK_H
+
+#define LTALK_HLEN		1
+#define LTALK_MTU		600
+#define LTALK_ALEN		1
+
+
+#endif /* _UAPI__LINUX_LTALK_H */
diff --git a/include/linux/if_packet.h b/include/uapi/linux/if_packet.h
similarity index 100%
rename from include/linux/if_packet.h
rename to include/uapi/linux/if_packet.h
diff --git a/include/uapi/linux/if_phonet.h b/include/uapi/linux/if_phonet.h
new file mode 100644
index 0000000000000000000000000000000000000000..f7ad9e24eb3d8f1e46aaba281a5ac631631b77cd
--- /dev/null
+++ b/include/uapi/linux/if_phonet.h
@@ -0,0 +1,16 @@
+/*
+ * File: if_phonet.h
+ *
+ * Phonet interface kernel definitions
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ */
+#ifndef _UAPILINUX_IF_PHONET_H
+#define _UAPILINUX_IF_PHONET_H
+
+#define PHONET_MIN_MTU		6	/* pn_length = 0 */
+#define PHONET_MAX_MTU		65541	/* pn_length = 0xffff */
+#define PHONET_DEV_MTU		PHONET_MAX_MTU
+
+
+#endif /* _UAPILINUX_IF_PHONET_H */
diff --git a/include/linux/if_plip.h b/include/uapi/linux/if_plip.h
similarity index 100%
rename from include/linux/if_plip.h
rename to include/uapi/linux/if_plip.h
diff --git a/include/linux/if_ppp.h b/include/uapi/linux/if_ppp.h
similarity index 100%
rename from include/linux/if_ppp.h
rename to include/uapi/linux/if_ppp.h
diff --git a/include/uapi/linux/if_pppol2tp.h b/include/uapi/linux/if_pppol2tp.h
new file mode 100644
index 0000000000000000000000000000000000000000..163e8adac2d664515a36341778209be057ab012d
--- /dev/null
+++ b/include/uapi/linux/if_pppol2tp.h
@@ -0,0 +1,104 @@
+/***************************************************************************
+ * Linux PPP over L2TP (PPPoL2TP) Socket Implementation (RFC 2661)
+ *
+ * This file supplies definitions required by the PPP over L2TP driver
+ * (l2tp_ppp.c).  All version information wrt this file is located in l2tp_ppp.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI__LINUX_IF_PPPOL2TP_H
+#define _UAPI__LINUX_IF_PPPOL2TP_H
+
+#include <linux/types.h>
+
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket over IPv4.
+ */
+struct pppol2tp_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP socket to use */
+
+	struct sockaddr_in addr;	/* IP address and port to send to */
+
+	__u16 s_tunnel, s_session;	/* For matching incoming packets */
+	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
+};
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket over IPv6.
+ */
+struct pppol2tpin6_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP socket to use */
+
+	__u16 s_tunnel, s_session;	/* For matching incoming packets */
+	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
+
+	struct sockaddr_in6 addr;	/* IP address and port to send to */
+};
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct pppol2tpv3_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP or IP socket to use */
+
+	struct sockaddr_in addr;	/* IP address and port to send to */
+
+	__u32 s_tunnel, s_session;	/* For matching incoming packets */
+	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
+};
+
+struct pppol2tpv3in6_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP or IP socket to use */
+
+	__u32 s_tunnel, s_session;	/* For matching incoming packets */
+	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
+
+	struct sockaddr_in6 addr;	/* IP address and port to send to */
+};
+
+/* Socket options:
+ * DEBUG	- bitmask of debug message categories
+ * SENDSEQ	- 0 => don't send packets with sequence numbers
+ *		  1 => send packets with sequence numbers
+ * RECVSEQ	- 0 => receive packet sequence numbers are optional
+ *		  1 => drop receive packets without sequence numbers
+ * LNSMODE	- 0 => act as LAC.
+ *		  1 => act as LNS.
+ * REORDERTO	- reorder timeout (in millisecs). If 0, don't try to reorder.
+ */
+enum {
+	PPPOL2TP_SO_DEBUG	= 1,
+	PPPOL2TP_SO_RECVSEQ	= 2,
+	PPPOL2TP_SO_SENDSEQ	= 3,
+	PPPOL2TP_SO_LNSMODE	= 4,
+	PPPOL2TP_SO_REORDERTO	= 5,
+};
+
+/* Debug message categories for the DEBUG socket option */
+enum {
+	PPPOL2TP_MSG_DEBUG	= (1 << 0),	/* verbose debug (if
+						 * compiled in) */
+	PPPOL2TP_MSG_CONTROL	= (1 << 1),	/* userspace - kernel
+						 * interface */
+	PPPOL2TP_MSG_SEQ	= (1 << 2),	/* sequence numbers */
+	PPPOL2TP_MSG_DATA	= (1 << 3),	/* data packets */
+};
+
+
+
+#endif /* _UAPI__LINUX_IF_PPPOL2TP_H */
diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h
new file mode 100644
index 0000000000000000000000000000000000000000..0b46fd57c8f6ff28f356598c5ffbe6a67f3496f2
--- /dev/null
+++ b/include/uapi/linux/if_pppox.h
@@ -0,0 +1,156 @@
+/***************************************************************************
+ * Linux PPP over X - Generic PPP transport layer sockets
+ * Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516) 
+ *
+ * This file supplies definitions required by the PPP over Ethernet driver
+ * (pppox.c).  All version information wrt this file is located in pppox.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI__LINUX_IF_PPPOX_H
+#define _UAPI__LINUX_IF_PPPOX_H
+
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#include <linux/socket.h>
+#include <linux/if_ether.h>
+#include <linux/if_pppol2tp.h>
+
+/* For user-space programs to pick up these definitions
+ * which they wouldn't get otherwise without defining __KERNEL__
+ */
+#ifndef AF_PPPOX
+#define AF_PPPOX	24
+#define PF_PPPOX	AF_PPPOX
+#endif /* !(AF_PPPOX) */
+
+/************************************************************************ 
+ * PPPoE addressing definition 
+ */ 
+typedef __be16 sid_t;
+struct pppoe_addr {
+	sid_t         sid;                    /* Session identifier */
+	unsigned char remote[ETH_ALEN];       /* Remote address */
+	char          dev[IFNAMSIZ];          /* Local device to use */
+}; 
+ 
+/************************************************************************ 
+ * PPTP addressing definition
+ */
+struct pptp_addr {
+	__be16		call_id;
+	struct in_addr	sin_addr;
+};
+
+/************************************************************************
+ * Protocols supported by AF_PPPOX
+ */
+#define PX_PROTO_OE    0 /* Currently just PPPoE */
+#define PX_PROTO_OL2TP 1 /* Now L2TP also */
+#define PX_PROTO_PPTP  2
+#define PX_MAX_PROTO   3
+
+struct sockaddr_pppox {
+	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;          /* protocol identifier */
+	union {
+		struct pppoe_addr  pppoe;
+		struct pptp_addr   pptp;
+	} sa_addr;
+} __packed;
+
+/* The use of the above union isn't viable because the size of this
+ * struct must stay fixed over time -- applications use sizeof(struct
+ * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
+ * type instead.
+ */
+struct sockaddr_pppol2tp {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tp_addr pppol2tp;
+} __packed;
+
+struct sockaddr_pppol2tpin6 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpin6_addr pppol2tp;
+} __packed;
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct sockaddr_pppol2tpv3 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpv3_addr pppol2tp;
+} __packed;
+
+struct sockaddr_pppol2tpv3in6 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpv3in6_addr pppol2tp;
+} __packed;
+
+/*********************************************************************
+ *
+ * ioctl interface for defining forwarding of connections
+ *
+ ********************************************************************/
+
+#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
+#define PPPOEIOCDFWD	_IO(0xB1 ,1)
+/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
+
+/* Codes to identify message types */
+#define PADI_CODE	0x09
+#define PADO_CODE	0x07
+#define PADR_CODE	0x19
+#define PADS_CODE	0x65
+#define PADT_CODE	0xa7
+struct pppoe_tag {
+	__be16 tag_type;
+	__be16 tag_len;
+	char tag_data[0];
+} __attribute__ ((packed));
+
+/* Tag identifiers */
+#define PTT_EOL		__cpu_to_be16(0x0000)
+#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
+#define PTT_AC_NAME	__cpu_to_be16(0x0102)
+#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
+#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
+#define PTT_VENDOR 	__cpu_to_be16(0x0105)
+#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
+#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
+#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
+#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
+
+struct pppoe_hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 ver : 4;
+	__u8 type : 4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 type : 4;
+	__u8 ver : 4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8 code;
+	__be16 sid;
+	__be16 length;
+	struct pppoe_tag tag[0];
+} __packed;
+
+/* Length of entire PPPoE + PPP header */
+#define PPPOE_SES_HLEN	8
+
+
+#endif /* _UAPI__LINUX_IF_PPPOX_H */
diff --git a/include/linux/if_slip.h b/include/uapi/linux/if_slip.h
similarity index 100%
rename from include/linux/if_slip.h
rename to include/uapi/linux/if_slip.h
diff --git a/include/uapi/linux/if_team.h b/include/uapi/linux/if_team.h
new file mode 100644
index 0000000000000000000000000000000000000000..7b8fa339de30348508ab3810c4c1aa3ca1573662
--- /dev/null
+++ b/include/uapi/linux/if_team.h
@@ -0,0 +1,107 @@
+/*
+ * include/linux/if_team.h - Network team device driver header
+ * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_TEAM_H_
+#define _UAPI_LINUX_IF_TEAM_H_
+
+
+#define TEAM_STRING_MAX_LEN 32
+
+/**********************************
+ * NETLINK_GENERIC netlink family.
+ **********************************/
+
+enum {
+	TEAM_CMD_NOOP,
+	TEAM_CMD_OPTIONS_SET,
+	TEAM_CMD_OPTIONS_GET,
+	TEAM_CMD_PORT_LIST_GET,
+
+	__TEAM_CMD_MAX,
+	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
+};
+
+enum {
+	TEAM_ATTR_UNSPEC,
+	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
+	TEAM_ATTR_LIST_OPTION,		/* nest */
+	TEAM_ATTR_LIST_PORT,		/* nest */
+
+	__TEAM_ATTR_MAX,
+	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
+};
+
+/* Nested layout of get/set msg:
+ *
+ *	[TEAM_ATTR_LIST_OPTION]
+ *		[TEAM_ATTR_ITEM_OPTION]
+ *			[TEAM_ATTR_OPTION_*], ...
+ *		[TEAM_ATTR_ITEM_OPTION]
+ *			[TEAM_ATTR_OPTION_*], ...
+ *		...
+ *	[TEAM_ATTR_LIST_PORT]
+ *		[TEAM_ATTR_ITEM_PORT]
+ *			[TEAM_ATTR_PORT_*], ...
+ *		[TEAM_ATTR_ITEM_PORT]
+ *			[TEAM_ATTR_PORT_*], ...
+ *		...
+ */
+
+enum {
+	TEAM_ATTR_ITEM_OPTION_UNSPEC,
+	TEAM_ATTR_ITEM_OPTION,		/* nest */
+
+	__TEAM_ATTR_ITEM_OPTION_MAX,
+	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_OPTION_UNSPEC,
+	TEAM_ATTR_OPTION_NAME,		/* string */
+	TEAM_ATTR_OPTION_CHANGED,	/* flag */
+	TEAM_ATTR_OPTION_TYPE,		/* u8 */
+	TEAM_ATTR_OPTION_DATA,		/* dynamic */
+	TEAM_ATTR_OPTION_REMOVED,	/* flag */
+	TEAM_ATTR_OPTION_PORT_IFINDEX,	/* u32 */ /* for per-port options */
+	TEAM_ATTR_OPTION_ARRAY_INDEX,	/* u32 */ /* for array options */
+
+	__TEAM_ATTR_OPTION_MAX,
+	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_ITEM_PORT_UNSPEC,
+	TEAM_ATTR_ITEM_PORT,		/* nest */
+
+	__TEAM_ATTR_ITEM_PORT_MAX,
+	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_PORT_UNSPEC,
+	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
+	TEAM_ATTR_PORT_CHANGED,		/* flag */
+	TEAM_ATTR_PORT_LINKUP,		/* flag */
+	TEAM_ATTR_PORT_SPEED,		/* u32 */
+	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
+	TEAM_ATTR_PORT_REMOVED,		/* flag */
+
+	__TEAM_ATTR_PORT_MAX,
+	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define TEAM_GENL_NAME "team"
+#define TEAM_GENL_VERSION 0x1
+#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
+
+#endif /* _UAPI_LINUX_IF_TEAM_H_ */
diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h
new file mode 100644
index 0000000000000000000000000000000000000000..25a585ce23e68243e1f0a1610f240624aaef6bde
--- /dev/null
+++ b/include/uapi/linux/if_tun.h
@@ -0,0 +1,94 @@
+/*
+ *  Universal TUN/TAP device driver.
+ *  Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _UAPI__IF_TUN_H
+#define _UAPI__IF_TUN_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <linux/filter.h>
+
+/* Read queue size */
+#define TUN_READQ_SIZE	500
+
+/* TUN device flags */
+#define TUN_TUN_DEV 	0x0001	
+#define TUN_TAP_DEV	0x0002
+#define TUN_TYPE_MASK   0x000f
+
+#define TUN_FASYNC	0x0010
+#define TUN_NOCHECKSUM	0x0020
+#define TUN_NO_PI	0x0040
+#define TUN_ONE_QUEUE	0x0080
+#define TUN_PERSIST 	0x0100	
+#define TUN_VNET_HDR 	0x0200
+
+/* Ioctl defines */
+#define TUNSETNOCSUM  _IOW('T', 200, int) 
+#define TUNSETDEBUG   _IOW('T', 201, int) 
+#define TUNSETIFF     _IOW('T', 202, int) 
+#define TUNSETPERSIST _IOW('T', 203, int) 
+#define TUNSETOWNER   _IOW('T', 204, int)
+#define TUNSETLINK    _IOW('T', 205, int)
+#define TUNSETGROUP   _IOW('T', 206, int)
+#define TUNGETFEATURES _IOR('T', 207, unsigned int)
+#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
+#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF      _IOR('T', 210, unsigned int)
+#define TUNGETSNDBUF   _IOR('T', 211, int)
+#define TUNSETSNDBUF   _IOW('T', 212, int)
+#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
+#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
+#define TUNGETVNETHDRSZ _IOR('T', 215, int)
+#define TUNSETVNETHDRSZ _IOW('T', 216, int)
+
+/* TUNSETIFF ifr flags */
+#define IFF_TUN		0x0001
+#define IFF_TAP		0x0002
+#define IFF_NO_PI	0x1000
+#define IFF_ONE_QUEUE	0x2000
+#define IFF_VNET_HDR	0x4000
+#define IFF_TUN_EXCL	0x8000
+
+/* Features for GSO (TUNSETOFFLOAD). */
+#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
+#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
+#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
+#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
+#define TUN_F_UFO	0x10	/* I can handle UFO packets */
+
+/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
+#define TUN_PKT_STRIP	0x0001
+struct tun_pi {
+	__u16  flags;
+	__be16 proto;
+};
+
+/*
+ * Filter spec (used for SETXXFILTER ioctls)
+ * This stuff is applicable only to the TAP (Ethernet) devices.
+ * If the count is zero the filter is disabled and the driver accepts
+ * all packets (promisc mode).
+ * If the filter is enabled in order to accept broadcast packets
+ * broadcast addr must be explicitly included in the addr list.
+ */
+#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
+struct tun_filter {
+	__u16  flags; /* TUN_FLT_ flags see above */
+	__u16  count; /* Number of addresses */
+	__u8   addr[0][ETH_ALEN];
+};
+
+#endif /* _UAPI__IF_TUN_H */
diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h
new file mode 100644
index 0000000000000000000000000000000000000000..5db5942575fe9781f4e06bdb89f6f1e86e1dfb5f
--- /dev/null
+++ b/include/uapi/linux/if_tunnel.h
@@ -0,0 +1,96 @@
+#ifndef _UAPI_IF_TUNNEL_H_
+#define _UAPI_IF_TUNNEL_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+
+#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
+#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
+#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
+#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
+#define SIOCGETPRL      (SIOCDEVPRIVATE + 4)
+#define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
+#define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
+#define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
+#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
+#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
+#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
+#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
+
+#define GRE_CSUM	__cpu_to_be16(0x8000)
+#define GRE_ROUTING	__cpu_to_be16(0x4000)
+#define GRE_KEY		__cpu_to_be16(0x2000)
+#define GRE_SEQ		__cpu_to_be16(0x1000)
+#define GRE_STRICT	__cpu_to_be16(0x0800)
+#define GRE_REC		__cpu_to_be16(0x0700)
+#define GRE_FLAGS	__cpu_to_be16(0x00F8)
+#define GRE_VERSION	__cpu_to_be16(0x0007)
+
+struct ip_tunnel_parm {
+	char			name[IFNAMSIZ];
+	int			link;
+	__be16			i_flags;
+	__be16			o_flags;
+	__be32			i_key;
+	__be32			o_key;
+	struct iphdr		iph;
+};
+
+/* SIT-mode i_flags */
+#define	SIT_ISATAP	0x0001
+
+struct ip_tunnel_prl {
+	__be32			addr;
+	__u16			flags;
+	__u16			__reserved;
+	__u32			datalen;
+	__u32			__reserved2;
+	/* data follows */
+};
+
+/* PRL flags */
+#define	PRL_DEFAULT		0x0001
+
+struct ip_tunnel_6rd {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	__u16			prefixlen;
+	__u16			relay_prefixlen;
+};
+
+enum {
+	IFLA_GRE_UNSPEC,
+	IFLA_GRE_LINK,
+	IFLA_GRE_IFLAGS,
+	IFLA_GRE_OFLAGS,
+	IFLA_GRE_IKEY,
+	IFLA_GRE_OKEY,
+	IFLA_GRE_LOCAL,
+	IFLA_GRE_REMOTE,
+	IFLA_GRE_TTL,
+	IFLA_GRE_TOS,
+	IFLA_GRE_PMTUDISC,
+	IFLA_GRE_ENCAP_LIMIT,
+	IFLA_GRE_FLOWINFO,
+	IFLA_GRE_FLAGS,
+	__IFLA_GRE_MAX,
+};
+
+#define IFLA_GRE_MAX	(__IFLA_GRE_MAX - 1)
+
+/* VTI-mode i_flags */
+#define VTI_ISVTI 0x0001
+
+enum {
+	IFLA_VTI_UNSPEC,
+	IFLA_VTI_LINK,
+	IFLA_VTI_IKEY,
+	IFLA_VTI_OKEY,
+	IFLA_VTI_LOCAL,
+	IFLA_VTI_REMOTE,
+	__IFLA_VTI_MAX,
+};
+
+#define IFLA_VTI_MAX	(__IFLA_VTI_MAX - 1)
+#endif /* _UAPI_IF_TUNNEL_H_ */
diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h
new file mode 100644
index 0000000000000000000000000000000000000000..0744f8e65d1599ef4764af2947d1f61440355163
--- /dev/null
+++ b/include/uapi/linux/if_vlan.h
@@ -0,0 +1,63 @@
+/*
+ * VLAN		An implementation of 802.1Q VLAN tagging.
+ *
+ * Authors:	Ben Greear <greearb@candelatech.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI_LINUX_IF_VLAN_H_
+#define _UAPI_LINUX_IF_VLAN_H_
+
+
+/* VLAN IOCTLs are found in sockios.h */
+
+/* Passed in vlan_ioctl_args structure to determine behaviour. */
+enum vlan_ioctl_cmds {
+	ADD_VLAN_CMD,
+	DEL_VLAN_CMD,
+	SET_VLAN_INGRESS_PRIORITY_CMD,
+	SET_VLAN_EGRESS_PRIORITY_CMD,
+	GET_VLAN_INGRESS_PRIORITY_CMD,
+	GET_VLAN_EGRESS_PRIORITY_CMD,
+	SET_VLAN_NAME_TYPE_CMD,
+	SET_VLAN_FLAG_CMD,
+	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
+	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
+};
+
+enum vlan_flags {
+	VLAN_FLAG_REORDER_HDR	= 0x1,
+	VLAN_FLAG_GVRP		= 0x2,
+	VLAN_FLAG_LOOSE_BINDING	= 0x4,
+};
+
+enum vlan_name_types {
+	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
+	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
+	VLAN_NAME_TYPE_HIGHEST
+};
+
+struct vlan_ioctl_args {
+	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
+	char device1[24];
+
+        union {
+		char device2[24];
+		int VID;
+		unsigned int skb_priority;
+		unsigned int name_type;
+		unsigned int bind_type;
+		unsigned int flag; /* Matches vlan_dev_priv flags */
+        } u;
+
+	short vlan_qos;   
+};
+
+#endif /* _UAPI_LINUX_IF_VLAN_H_ */
diff --git a/include/linux/if_x25.h b/include/uapi/linux/if_x25.h
similarity index 100%
rename from include/linux/if_x25.h
rename to include/uapi/linux/if_x25.h
diff --git a/include/uapi/linux/igmp.h b/include/uapi/linux/igmp.h
new file mode 100644
index 0000000000000000000000000000000000000000..ccbb32aa67044f949080551c9f4049189f944fa9
--- /dev/null
+++ b/include/uapi/linux/igmp.h
@@ -0,0 +1,128 @@
+/*
+ *	Linux NET3:	Internet Group Management Protocol  [IGMP]
+ *
+ *	Authors:
+ *		Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	Extended to talk the BSD extended IGMP protocol of mrouted 3.6
+ *
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IGMP_H
+#define _UAPI_LINUX_IGMP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ *	IGMP protocol structures
+ */
+
+/*
+ *	Header in on cable format
+ */
+
+struct igmphdr {
+	__u8 type;
+	__u8 code;		/* For newer IGMP */
+	__sum16 csum;
+	__be32 group;
+};
+
+/* V3 group record types [grec_type] */
+#define IGMPV3_MODE_IS_INCLUDE		1
+#define IGMPV3_MODE_IS_EXCLUDE		2
+#define IGMPV3_CHANGE_TO_INCLUDE	3
+#define IGMPV3_CHANGE_TO_EXCLUDE	4
+#define IGMPV3_ALLOW_NEW_SOURCES	5
+#define IGMPV3_BLOCK_OLD_SOURCES	6
+
+struct igmpv3_grec {
+	__u8	grec_type;
+	__u8	grec_auxwords;
+	__be16	grec_nsrcs;
+	__be32	grec_mca;
+	__be32	grec_src[0];
+};
+
+struct igmpv3_report {
+	__u8 type;
+	__u8 resv1;
+	__be16 csum;
+	__be16 resv2;
+	__be16 ngrec;
+	struct igmpv3_grec grec[0];
+};
+
+struct igmpv3_query {
+	__u8 type;
+	__u8 code;
+	__be16 csum;
+	__be32 group;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 qrv:3,
+	     suppress:1,
+	     resv:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 resv:4,
+	     suppress:1,
+	     qrv:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 qqic;
+	__be16 nsrcs;
+	__be32 srcs[0];
+};
+
+#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
+#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
+#define IGMP_DVMRP			0x13	/* DVMRP routing */
+#define IGMP_PIM			0x14	/* PIM routing */
+#define IGMP_TRACE			0x15
+#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
+#define IGMP_HOST_LEAVE_MESSAGE 	0x17
+#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
+
+#define IGMP_MTRACE_RESP		0x1e
+#define IGMP_MTRACE			0x1f
+
+
+/*
+ *	Use the BSD names for these for compatibility
+ */
+
+#define IGMP_DELAYING_MEMBER		0x01
+#define IGMP_IDLE_MEMBER		0x02
+#define IGMP_LAZY_MEMBER		0x03
+#define IGMP_SLEEPING_MEMBER		0x04
+#define IGMP_AWAKENING_MEMBER		0x05
+
+#define IGMP_MINLEN			8
+
+#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
+						/* query (in seconds)	*/
+
+#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
+						/* specifies time in 10th of seconds	 */
+
+#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
+						/* message in this period of time,	*/
+						/* revert to IGMP v2 router.		*/
+
+#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
+#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
+#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
+#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
+#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
+
+/*
+ * struct for keeping the multicast list in
+ */
+
+#endif /* _UAPI_LINUX_IGMP_H */
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
new file mode 100644
index 0000000000000000000000000000000000000000..9edb441df8275e027a36885d7793bba1a3c35a5a
--- /dev/null
+++ b/include/uapi/linux/in.h
@@ -0,0 +1,253 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the Internet Protocol.
+ *
+ * Version:	@(#)in.h	1.0.1	04/21/93
+ *
+ * Authors:	Original taken from the GNU Project <netinet/in.h> file.
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IN_H
+#define _UAPI_LINUX_IN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Standard well-defined IP protocols.  */
+enum {
+  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
+  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
+  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
+  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
+  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
+  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
+  IPPROTO_PUP = 12,		/* PUP protocol				*/
+  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
+  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
+  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
+  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
+  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
+
+  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
+
+  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
+  IPPROTO_AH = 51,             /* Authentication Header protocol       */
+  IPPROTO_BEETPH = 94,	       /* IP option pseudo header for BEET */
+  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
+
+  IPPROTO_COMP   = 108,                /* Compression Header protocol */
+  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
+  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
+
+  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
+  IPPROTO_MAX
+};
+
+
+/* Internet address. */
+struct in_addr {
+	__be32	s_addr;
+};
+
+#define IP_TOS		1
+#define IP_TTL		2
+#define IP_HDRINCL	3
+#define IP_OPTIONS	4
+#define IP_ROUTER_ALERT	5
+#define IP_RECVOPTS	6
+#define IP_RETOPTS	7
+#define IP_PKTINFO	8
+#define IP_PKTOPTIONS	9
+#define IP_MTU_DISCOVER	10
+#define IP_RECVERR	11
+#define IP_RECVTTL	12
+#define	IP_RECVTOS	13
+#define IP_MTU		14
+#define IP_FREEBIND	15
+#define IP_IPSEC_POLICY	16
+#define IP_XFRM_POLICY	17
+#define IP_PASSSEC	18
+#define IP_TRANSPARENT	19
+
+/* BSD compatibility */
+#define IP_RECVRETOPTS	IP_RETOPTS
+
+/* TProxy original addresses */
+#define IP_ORIGDSTADDR       20
+#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
+
+#define IP_MINTTL       21
+#define IP_NODEFRAG     22
+
+/* IP_MTU_DISCOVER values */
+#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
+#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
+#define IP_PMTUDISC_DO			2	/* Always DF		*/
+#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
+
+#define IP_MULTICAST_IF			32
+#define IP_MULTICAST_TTL 		33
+#define IP_MULTICAST_LOOP 		34
+#define IP_ADD_MEMBERSHIP		35
+#define IP_DROP_MEMBERSHIP		36
+#define IP_UNBLOCK_SOURCE		37
+#define IP_BLOCK_SOURCE			38
+#define IP_ADD_SOURCE_MEMBERSHIP	39
+#define IP_DROP_SOURCE_MEMBERSHIP	40
+#define IP_MSFILTER			41
+#define MCAST_JOIN_GROUP		42
+#define MCAST_BLOCK_SOURCE		43
+#define MCAST_UNBLOCK_SOURCE		44
+#define MCAST_LEAVE_GROUP		45
+#define MCAST_JOIN_SOURCE_GROUP		46
+#define MCAST_LEAVE_SOURCE_GROUP	47
+#define MCAST_MSFILTER			48
+#define IP_MULTICAST_ALL		49
+#define IP_UNICAST_IF			50
+
+#define MCAST_EXCLUDE	0
+#define MCAST_INCLUDE	1
+
+/* These need to appear somewhere around here */
+#define IP_DEFAULT_MULTICAST_TTL        1
+#define IP_DEFAULT_MULTICAST_LOOP       1
+
+/* Request struct for multicast socket ops */
+
+struct ip_mreq  {
+	struct in_addr imr_multiaddr;	/* IP multicast address of group */
+	struct in_addr imr_interface;	/* local IP address of interface */
+};
+
+struct ip_mreqn {
+	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
+	struct in_addr	imr_address;		/* local IP address of interface */
+	int		imr_ifindex;		/* Interface index */
+};
+
+struct ip_mreq_source {
+	__be32		imr_multiaddr;
+	__be32		imr_interface;
+	__be32		imr_sourceaddr;
+};
+
+struct ip_msfilter {
+	__be32		imsf_multiaddr;
+	__be32		imsf_interface;
+	__u32		imsf_fmode;
+	__u32		imsf_numsrc;
+	__be32		imsf_slist[1];
+};
+
+#define IP_MSFILTER_SIZE(numsrc) \
+	(sizeof(struct ip_msfilter) - sizeof(__u32) \
+	+ (numsrc) * sizeof(__u32))
+
+struct group_req {
+	__u32				 gr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gr_group;	/* group address */
+};
+
+struct group_source_req {
+	__u32				 gsr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gsr_group;	/* group address */
+	struct __kernel_sockaddr_storage gsr_source;	/* source address */
+};
+
+struct group_filter {
+	__u32				 gf_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
+	__u32				 gf_fmode;	/* filter mode */
+	__u32				 gf_numsrc;	/* number of sources */
+	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
+};
+
+#define GROUP_FILTER_SIZE(numsrc) \
+	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
+	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
+
+struct in_pktinfo {
+	int		ipi_ifindex;
+	struct in_addr	ipi_spec_dst;
+	struct in_addr	ipi_addr;
+};
+
+/* Structure describing an Internet (IP) socket address. */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_in {
+  __kernel_sa_family_t	sin_family;	/* Address family		*/
+  __be16		sin_port;	/* Port number			*/
+  struct in_addr	sin_addr;	/* Internet address		*/
+
+  /* Pad to size of `struct sockaddr'. */
+  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
+			sizeof(unsigned short int) - sizeof(struct in_addr)];
+};
+#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
+
+
+/*
+ * Definitions of the bits in an Internet address integer.
+ * On subnets, host and network parts are found according
+ * to the subnet mask, not these masks.
+ */
+#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
+#define	IN_CLASSA_NET		0xff000000
+#define	IN_CLASSA_NSHIFT	24
+#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
+#define	IN_CLASSA_MAX		128
+
+#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
+#define	IN_CLASSB_NET		0xffff0000
+#define	IN_CLASSB_NSHIFT	16
+#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
+#define	IN_CLASSB_MAX		65536
+
+#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
+#define	IN_CLASSC_NET		0xffffff00
+#define	IN_CLASSC_NSHIFT	8
+#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
+
+#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
+#define	IN_MULTICAST(a)		IN_CLASSD(a)
+#define IN_MULTICAST_NET	0xF0000000
+
+#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
+#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
+
+/* Address to accept any incoming messages. */
+#define	INADDR_ANY		((unsigned long int) 0x00000000)
+
+/* Address to send to all hosts. */
+#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
+
+/* Address indicating an error return. */
+#define	INADDR_NONE		((unsigned long int) 0xffffffff)
+
+/* Network number for local host loopback. */
+#define	IN_LOOPBACKNET		127
+
+/* Address to loopback in software to local host.  */
+#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
+#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
+
+/* Defines for Multicast INADDR */
+#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
+#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
+#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
+#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
+
+
+/* <asm/byteorder.h> contains the htonl type stuff.. */
+#include <asm/byteorder.h> 
+
+
+#endif /* _UAPI_LINUX_IN_H */
diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h
new file mode 100644
index 0000000000000000000000000000000000000000..1e3159989958efb006f607a5a3755ccf24e2308a
--- /dev/null
+++ b/include/uapi/linux/in6.h
@@ -0,0 +1,279 @@
+/*
+ *	Types and definitions for AF_INET6 
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	Sources:
+ *	IPv6 Program Interfaces for BSD Systems
+ *      <draft-ietf-ipngwg-bsd-api-05.txt>
+ *
+ *	Advanced Sockets API for IPv6
+ *	<draft-stevens-advanced-api-00.txt>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IN6_H
+#define _UAPI_LINUX_IN6_H
+
+#include <linux/types.h>
+
+/*
+ *	IPv6 address structure
+ */
+
+struct in6_addr {
+	union {
+		__u8		u6_addr8[16];
+		__be16		u6_addr16[8];
+		__be32		u6_addr32[4];
+	} in6_u;
+#define s6_addr			in6_u.u6_addr8
+#define s6_addr16		in6_u.u6_addr16
+#define s6_addr32		in6_u.u6_addr32
+};
+
+/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
+ * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
+ * in network byte order, not in host byte order as are the IPv4 equivalents
+ */
+
+struct sockaddr_in6 {
+	unsigned short int	sin6_family;    /* AF_INET6 */
+	__be16			sin6_port;      /* Transport layer port # */
+	__be32			sin6_flowinfo;  /* IPv6 flow information */
+	struct in6_addr		sin6_addr;      /* IPv6 address */
+	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
+};
+
+struct ipv6_mreq {
+	/* IPv6 multicast address of group */
+	struct in6_addr ipv6mr_multiaddr;
+
+	/* local IPv6 address of interface */
+	int		ipv6mr_ifindex;
+};
+
+#define ipv6mr_acaddr	ipv6mr_multiaddr
+
+struct in6_flowlabel_req {
+	struct in6_addr	flr_dst;
+	__be32	flr_label;
+	__u8	flr_action;
+	__u8	flr_share;
+	__u16	flr_flags;
+	__u16 	flr_expires;
+	__u16	flr_linger;
+	__u32	__flr_pad;
+	/* Options in format of IPV6_PKTOPTIONS */
+};
+
+#define IPV6_FL_A_GET	0
+#define IPV6_FL_A_PUT	1
+#define IPV6_FL_A_RENEW	2
+
+#define IPV6_FL_F_CREATE	1
+#define IPV6_FL_F_EXCL		2
+
+#define IPV6_FL_S_NONE		0
+#define IPV6_FL_S_EXCL		1
+#define IPV6_FL_S_PROCESS	2
+#define IPV6_FL_S_USER		3
+#define IPV6_FL_S_ANY		255
+
+
+/*
+ *	Bitmask constant declarations to help applications select out the 
+ *	flow label and priority fields.
+ *
+ *	Note that this are in host byte order while the flowinfo field of
+ *	sockaddr_in6 is in network byte order.
+ */
+
+#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
+#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
+
+/* These definitions are obsolete */
+#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
+#define IPV6_PRIORITY_FILLER		0x0100
+#define IPV6_PRIORITY_UNATTENDED	0x0200
+#define IPV6_PRIORITY_RESERVED1		0x0300
+#define IPV6_PRIORITY_BULK		0x0400
+#define IPV6_PRIORITY_RESERVED2		0x0500
+#define IPV6_PRIORITY_INTERACTIVE	0x0600
+#define IPV6_PRIORITY_CONTROL		0x0700
+#define IPV6_PRIORITY_8			0x0800
+#define IPV6_PRIORITY_9			0x0900
+#define IPV6_PRIORITY_10		0x0a00
+#define IPV6_PRIORITY_11		0x0b00
+#define IPV6_PRIORITY_12		0x0c00
+#define IPV6_PRIORITY_13		0x0d00
+#define IPV6_PRIORITY_14		0x0e00
+#define IPV6_PRIORITY_15		0x0f00
+
+/*
+ *	IPV6 extension headers
+ */
+#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
+#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
+#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
+#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
+#define IPPROTO_NONE		59	/* IPv6 no next header		*/
+#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
+#define IPPROTO_MH		135	/* IPv6 mobility header		*/
+
+/*
+ *	IPv6 TLV options.
+ */
+#define IPV6_TLV_PAD1		0
+#define IPV6_TLV_PADN		1
+#define IPV6_TLV_ROUTERALERT	5
+#define IPV6_TLV_JUMBO		194
+#define IPV6_TLV_HAO		201	/* home address option */
+
+/*
+ *	IPV6 socket options
+ */
+
+#define IPV6_ADDRFORM		1
+#define IPV6_2292PKTINFO	2
+#define IPV6_2292HOPOPTS	3
+#define IPV6_2292DSTOPTS	4
+#define IPV6_2292RTHDR		5
+#define IPV6_2292PKTOPTIONS	6
+#define IPV6_CHECKSUM		7
+#define IPV6_2292HOPLIMIT	8
+#define IPV6_NEXTHOP		9
+#define IPV6_AUTHHDR		10	/* obsolete */
+#define IPV6_FLOWINFO		11
+
+#define IPV6_UNICAST_HOPS	16
+#define IPV6_MULTICAST_IF	17
+#define IPV6_MULTICAST_HOPS	18
+#define IPV6_MULTICAST_LOOP	19
+#define IPV6_ADD_MEMBERSHIP	20
+#define IPV6_DROP_MEMBERSHIP	21
+#define IPV6_ROUTER_ALERT	22
+#define IPV6_MTU_DISCOVER	23
+#define IPV6_MTU		24
+#define IPV6_RECVERR		25
+#define IPV6_V6ONLY		26
+#define IPV6_JOIN_ANYCAST	27
+#define IPV6_LEAVE_ANYCAST	28
+
+/* IPV6_MTU_DISCOVER values */
+#define IPV6_PMTUDISC_DONT		0
+#define IPV6_PMTUDISC_WANT		1
+#define IPV6_PMTUDISC_DO		2
+#define IPV6_PMTUDISC_PROBE		3
+
+/* Flowlabel */
+#define IPV6_FLOWLABEL_MGR	32
+#define IPV6_FLOWINFO_SEND	33
+
+#define IPV6_IPSEC_POLICY	34
+#define IPV6_XFRM_POLICY	35
+
+/*
+ * Multicast:
+ * Following socket options are shared between IPv4 and IPv6.
+ *
+ * MCAST_JOIN_GROUP		42
+ * MCAST_BLOCK_SOURCE		43
+ * MCAST_UNBLOCK_SOURCE		44
+ * MCAST_LEAVE_GROUP		45
+ * MCAST_JOIN_SOURCE_GROUP	46
+ * MCAST_LEAVE_SOURCE_GROUP	47
+ * MCAST_MSFILTER		48
+ */
+
+/*
+ * Advanced API (RFC3542) (1)
+ *
+ * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
+ */
+
+#define IPV6_RECVPKTINFO	49
+#define IPV6_PKTINFO		50
+#define IPV6_RECVHOPLIMIT	51
+#define IPV6_HOPLIMIT		52
+#define IPV6_RECVHOPOPTS	53
+#define IPV6_HOPOPTS		54
+#define IPV6_RTHDRDSTOPTS	55
+#define IPV6_RECVRTHDR		56
+#define IPV6_RTHDR		57
+#define IPV6_RECVDSTOPTS	58
+#define IPV6_DSTOPTS		59
+#define IPV6_RECVPATHMTU	60
+#define IPV6_PATHMTU		61
+#define IPV6_DONTFRAG		62
+#if 0	/* not yet */
+#define IPV6_USE_MIN_MTU	63
+#endif
+
+/*
+ * Netfilter (1)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO		64
+ * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES	65
+ */
+
+/*
+ * Advanced API (RFC3542) (2)
+ */
+#define IPV6_RECVTCLASS		66
+#define IPV6_TCLASS		67
+
+/*
+ * Netfilter (2)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_GET_REVISION_MATCH	68
+ * IP6T_SO_GET_REVISION_TARGET	69
+ */
+
+/* RFC5014: Source address selection */
+#define IPV6_ADDR_PREFERENCES	72
+
+#define IPV6_PREFER_SRC_TMP		0x0001
+#define IPV6_PREFER_SRC_PUBLIC		0x0002
+#define IPV6_PREFER_SRC_PUBTMP_DEFAULT	0x0100
+#define IPV6_PREFER_SRC_COA		0x0004
+#define IPV6_PREFER_SRC_HOME		0x0400
+#define IPV6_PREFER_SRC_CGA		0x0008
+#define IPV6_PREFER_SRC_NONCGA		0x0800
+
+/* RFC5082: Generalized Ttl Security Mechanism */
+#define IPV6_MINHOPCOUNT		73
+
+#define IPV6_ORIGDSTADDR        74
+#define IPV6_RECVORIGDSTADDR    IPV6_ORIGDSTADDR
+#define IPV6_TRANSPARENT        75
+#define IPV6_UNICAST_IF         76
+
+/*
+ * Multicast Routing:
+ * see include/linux/mroute6.h.
+ *
+ * MRT6_INIT			200
+ * MRT6_DONE			201
+ * MRT6_ADD_MIF			202
+ * MRT6_DEL_MIF			203
+ * MRT6_ADD_MFC			204
+ * MRT6_DEL_MFC			205
+ * MRT6_VERSION			206
+ * MRT6_ASSERT			207
+ * MRT6_PIM			208
+ * (reserved)			209
+ */
+#endif /* _UAPI_LINUX_IN6_H */
diff --git a/include/linux/in_route.h b/include/uapi/linux/in_route.h
similarity index 100%
rename from include/linux/in_route.h
rename to include/uapi/linux/in_route.h
diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h
new file mode 100644
index 0000000000000000000000000000000000000000..8c469af939aab33a2117d7361e247371c6303750
--- /dev/null
+++ b/include/uapi/linux/inet_diag.h
@@ -0,0 +1,136 @@
+#ifndef _UAPI_INET_DIAG_H_
+#define _UAPI_INET_DIAG_H_
+
+#include <linux/types.h>
+
+/* Just some random number */
+#define TCPDIAG_GETSOCK 18
+#define DCCPDIAG_GETSOCK 19
+
+#define INET_DIAG_GETSOCK_MAX 24
+
+/* Socket identity */
+struct inet_diag_sockid {
+	__be16	idiag_sport;
+	__be16	idiag_dport;
+	__be32	idiag_src[4];
+	__be32	idiag_dst[4];
+	__u32	idiag_if;
+	__u32	idiag_cookie[2];
+#define INET_DIAG_NOCOOKIE (~0U)
+};
+
+/* Request structure */
+
+struct inet_diag_req {
+	__u8	idiag_family;		/* Family of addresses. */
+	__u8	idiag_src_len;
+	__u8	idiag_dst_len;
+	__u8	idiag_ext;		/* Query extended information */
+
+	struct inet_diag_sockid id;
+
+	__u32	idiag_states;		/* States to dump */
+	__u32	idiag_dbs;		/* Tables to dump (NI) */
+};
+
+struct inet_diag_req_v2 {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+	__u8	idiag_ext;
+	__u8	pad;
+	__u32	idiag_states;
+	struct inet_diag_sockid id;
+};
+
+enum {
+	INET_DIAG_REQ_NONE,
+	INET_DIAG_REQ_BYTECODE,
+};
+
+#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
+
+/* Bytecode is sequence of 4 byte commands followed by variable arguments.
+ * All the commands identified by "code" are conditional jumps forward:
+ * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
+ * length of the command and its arguments.
+ */
+ 
+struct inet_diag_bc_op {
+	unsigned char	code;
+	unsigned char	yes;
+	unsigned short	no;
+};
+
+enum {
+	INET_DIAG_BC_NOP,
+	INET_DIAG_BC_JMP,
+	INET_DIAG_BC_S_GE,
+	INET_DIAG_BC_S_LE,
+	INET_DIAG_BC_D_GE,
+	INET_DIAG_BC_D_LE,
+	INET_DIAG_BC_AUTO,
+	INET_DIAG_BC_S_COND,
+	INET_DIAG_BC_D_COND,
+};
+
+struct inet_diag_hostcond {
+	__u8	family;
+	__u8	prefix_len;
+	int	port;
+	__be32	addr[0];
+};
+
+/* Base info structure. It contains socket identity (addrs/ports/cookie)
+ * and, alas, the information shown by netstat. */
+struct inet_diag_msg {
+	__u8	idiag_family;
+	__u8	idiag_state;
+	__u8	idiag_timer;
+	__u8	idiag_retrans;
+
+	struct inet_diag_sockid id;
+
+	__u32	idiag_expires;
+	__u32	idiag_rqueue;
+	__u32	idiag_wqueue;
+	__u32	idiag_uid;
+	__u32	idiag_inode;
+};
+
+/* Extensions */
+
+enum {
+	INET_DIAG_NONE,
+	INET_DIAG_MEMINFO,
+	INET_DIAG_INFO,
+	INET_DIAG_VEGASINFO,
+	INET_DIAG_CONG,
+	INET_DIAG_TOS,
+	INET_DIAG_TCLASS,
+	INET_DIAG_SKMEMINFO,
+};
+
+#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
+
+
+/* INET_DIAG_MEM */
+
+struct inet_diag_meminfo {
+	__u32	idiag_rmem;
+	__u32	idiag_wmem;
+	__u32	idiag_fmem;
+	__u32	idiag_tmem;
+};
+
+/* INET_DIAG_VEGASINFO */
+
+struct tcpvegas_info {
+	__u32	tcpv_enabled;
+	__u32	tcpv_rttcnt;
+	__u32	tcpv_rtt;
+	__u32	tcpv_minrtt;
+};
+
+
+#endif /* _UAPI_INET_DIAG_H_ */
diff --git a/include/uapi/linux/inotify.h b/include/uapi/linux/inotify.h
new file mode 100644
index 0000000000000000000000000000000000000000..e6bf35b2dd343980963c39741c5325072c6983d7
--- /dev/null
+++ b/include/uapi/linux/inotify.h
@@ -0,0 +1,74 @@
+/*
+ * Inode based directory notification for Linux
+ *
+ * Copyright (C) 2005 John McCutchan
+ */
+
+#ifndef _UAPI_LINUX_INOTIFY_H
+#define _UAPI_LINUX_INOTIFY_H
+
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/*
+ * struct inotify_event - structure read from the inotify device for each event
+ *
+ * When you are watching a directory, you will receive the filename for events
+ * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
+ */
+struct inotify_event {
+	__s32		wd;		/* watch descriptor */
+	__u32		mask;		/* watch mask */
+	__u32		cookie;		/* cookie to synchronize two events */
+	__u32		len;		/* length (including nulls) of name */
+	char		name[0];	/* stub for possible name */
+};
+
+/* the following are legal, implemented events that user-space can watch for */
+#define IN_ACCESS		0x00000001	/* File was accessed */
+#define IN_MODIFY		0x00000002	/* File was modified */
+#define IN_ATTRIB		0x00000004	/* Metadata changed */
+#define IN_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
+#define IN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define IN_OPEN			0x00000020	/* File was opened */
+#define IN_MOVED_FROM		0x00000040	/* File was moved from X */
+#define IN_MOVED_TO		0x00000080	/* File was moved to Y */
+#define IN_CREATE		0x00000100	/* Subfile was created */
+#define IN_DELETE		0x00000200	/* Subfile was deleted */
+#define IN_DELETE_SELF		0x00000400	/* Self was deleted */
+#define IN_MOVE_SELF		0x00000800	/* Self was moved */
+
+/* the following are legal events.  they are sent as needed to any watch */
+#define IN_UNMOUNT		0x00002000	/* Backing fs was unmounted */
+#define IN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+#define IN_IGNORED		0x00008000	/* File was ignored */
+
+/* helper events */
+#define IN_CLOSE		(IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
+#define IN_MOVE			(IN_MOVED_FROM | IN_MOVED_TO) /* moves */
+
+/* special flags */
+#define IN_ONLYDIR		0x01000000	/* only watch the path if it is a directory */
+#define IN_DONT_FOLLOW		0x02000000	/* don't follow a sym link */
+#define IN_EXCL_UNLINK		0x04000000	/* exclude events on unlinked objects */
+#define IN_MASK_ADD		0x20000000	/* add to the mask of an already existing watch */
+#define IN_ISDIR		0x40000000	/* event occurred against dir */
+#define IN_ONESHOT		0x80000000	/* only send event once */
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility.  Apps will get only the
+ * events that they originally wanted.  Be sure to add new events here!
+ */
+#define IN_ALL_EVENTS	(IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
+			 IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
+			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
+			 IN_MOVE_SELF)
+
+/* Flags for sys_inotify_init1.  */
+#define IN_CLOEXEC O_CLOEXEC
+#define IN_NONBLOCK O_NONBLOCK
+
+
+#endif /* _UAPI_LINUX_INOTIFY_H */
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
new file mode 100644
index 0000000000000000000000000000000000000000..558828590a6972f83b923f958a498a90222ad973
--- /dev/null
+++ b/include/uapi/linux/input.h
@@ -0,0 +1,1153 @@
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_INPUT_H
+#define _UAPI_INPUT_H
+
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <linux/types.h>
+#endif
+
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+	struct timeval time;
+	__u16 type;
+	__u16 code;
+	__s32 value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION		0x010001
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+	__u16 bustype;
+	__u16 vendor;
+	__u16 product;
+	__u16 version;
+};
+
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ *	the event stream.
+ * @flat: values that are within this value will be discarded by
+ *	joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ *	the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
+struct input_absinfo {
+	__s32 value;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 fuzz;
+	__s32 flat;
+	__s32 resolution;
+};
+
+/**
+ * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
+ * @scancode: scancode represented in machine-endian form.
+ * @len: length of the scancode that resides in @scancode buffer.
+ * @index: index in the keymap, may be used instead of scancode
+ * @flags: allows to specify how kernel should handle the request. For
+ *	example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
+ *	should perform lookup in keymap by @index instead of @scancode
+ * @keycode: key code assigned to this scancode
+ *
+ * The structure is used to retrieve and modify keymap data. Users have
+ * option of performing lookup either by @scancode itself or by @index
+ * in keymap entry. EVIOCGKEYCODE will also return scancode or index
+ * (depending on which element was used to perform lookup).
+ */
+struct input_keymap_entry {
+#define INPUT_KEYMAP_BY_INDEX	(1 << 0)
+	__u8  flags;
+	__u8  len;
+	__u16 index;
+	__u32 keycode;
+	__u8  scancode[32];
+};
+
+#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
+#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
+#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
+#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
+
+#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
+#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
+#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
+
+#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
+#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
+#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
+#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
+
+/**
+ * EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
+ *
+ * The ioctl buffer argument should be binary equivalent to
+ *
+ * struct input_mt_request_layout {
+ *	__u32 code;
+ *	__s32 values[num_slots];
+ * };
+ *
+ * where num_slots is the (arbitrary) number of MT slots to extract.
+ *
+ * The ioctl size argument (len) is the size of the buffer, which
+ * should satisfy len = (num_slots + 1) * sizeof(__s32).  If len is
+ * too small to fit all available slots, the first num_slots are
+ * returned.
+ *
+ * Before the call, code is set to the wanted ABS_MT event type. On
+ * return, values[] is filled with the slot values for the specified
+ * ABS_MT code.
+ *
+ * If the request code is not an ABS_MT value, -EINVAL is returned.
+ */
+#define EVIOCGMTSLOTS(len)	_IOC(_IOC_READ, 'E', 0x0a, len)
+
+#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
+#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
+#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
+#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
+
+#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
+#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
+#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
+
+#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
+#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
+#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
+
+#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
+
+#define EVIOCSCLOCKID		_IOW('E', 0xa0, int)			/* Set clockid to be used for timestamps */
+
+/*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
+#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
+#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
+
+#define INPUT_PROP_MAX			0x1f
+#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
+
+/*
+ * Event types
+ */
+
+#define EV_SYN			0x00
+#define EV_KEY			0x01
+#define EV_REL			0x02
+#define EV_ABS			0x03
+#define EV_MSC			0x04
+#define EV_SW			0x05
+#define EV_LED			0x11
+#define EV_SND			0x12
+#define EV_REP			0x14
+#define EV_FF			0x15
+#define EV_PWR			0x16
+#define EV_FF_STATUS		0x17
+#define EV_MAX			0x1f
+#define EV_CNT			(EV_MAX+1)
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT		0
+#define SYN_CONFIG		1
+#define SYN_MT_REPORT		2
+#define SYN_DROPPED		3
+
+/*
+ * Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
+ */
+
+#define KEY_RESERVED		0
+#define KEY_ESC			1
+#define KEY_1			2
+#define KEY_2			3
+#define KEY_3			4
+#define KEY_4			5
+#define KEY_5			6
+#define KEY_6			7
+#define KEY_7			8
+#define KEY_8			9
+#define KEY_9			10
+#define KEY_0			11
+#define KEY_MINUS		12
+#define KEY_EQUAL		13
+#define KEY_BACKSPACE		14
+#define KEY_TAB			15
+#define KEY_Q			16
+#define KEY_W			17
+#define KEY_E			18
+#define KEY_R			19
+#define KEY_T			20
+#define KEY_Y			21
+#define KEY_U			22
+#define KEY_I			23
+#define KEY_O			24
+#define KEY_P			25
+#define KEY_LEFTBRACE		26
+#define KEY_RIGHTBRACE		27
+#define KEY_ENTER		28
+#define KEY_LEFTCTRL		29
+#define KEY_A			30
+#define KEY_S			31
+#define KEY_D			32
+#define KEY_F			33
+#define KEY_G			34
+#define KEY_H			35
+#define KEY_J			36
+#define KEY_K			37
+#define KEY_L			38
+#define KEY_SEMICOLON		39
+#define KEY_APOSTROPHE		40
+#define KEY_GRAVE		41
+#define KEY_LEFTSHIFT		42
+#define KEY_BACKSLASH		43
+#define KEY_Z			44
+#define KEY_X			45
+#define KEY_C			46
+#define KEY_V			47
+#define KEY_B			48
+#define KEY_N			49
+#define KEY_M			50
+#define KEY_COMMA		51
+#define KEY_DOT			52
+#define KEY_SLASH		53
+#define KEY_RIGHTSHIFT		54
+#define KEY_KPASTERISK		55
+#define KEY_LEFTALT		56
+#define KEY_SPACE		57
+#define KEY_CAPSLOCK		58
+#define KEY_F1			59
+#define KEY_F2			60
+#define KEY_F3			61
+#define KEY_F4			62
+#define KEY_F5			63
+#define KEY_F6			64
+#define KEY_F7			65
+#define KEY_F8			66
+#define KEY_F9			67
+#define KEY_F10			68
+#define KEY_NUMLOCK		69
+#define KEY_SCROLLLOCK		70
+#define KEY_KP7			71
+#define KEY_KP8			72
+#define KEY_KP9			73
+#define KEY_KPMINUS		74
+#define KEY_KP4			75
+#define KEY_KP5			76
+#define KEY_KP6			77
+#define KEY_KPPLUS		78
+#define KEY_KP1			79
+#define KEY_KP2			80
+#define KEY_KP3			81
+#define KEY_KP0			82
+#define KEY_KPDOT		83
+
+#define KEY_ZENKAKUHANKAKU	85
+#define KEY_102ND		86
+#define KEY_F11			87
+#define KEY_F12			88
+#define KEY_RO			89
+#define KEY_KATAKANA		90
+#define KEY_HIRAGANA		91
+#define KEY_HENKAN		92
+#define KEY_KATAKANAHIRAGANA	93
+#define KEY_MUHENKAN		94
+#define KEY_KPJPCOMMA		95
+#define KEY_KPENTER		96
+#define KEY_RIGHTCTRL		97
+#define KEY_KPSLASH		98
+#define KEY_SYSRQ		99
+#define KEY_RIGHTALT		100
+#define KEY_LINEFEED		101
+#define KEY_HOME		102
+#define KEY_UP			103
+#define KEY_PAGEUP		104
+#define KEY_LEFT		105
+#define KEY_RIGHT		106
+#define KEY_END			107
+#define KEY_DOWN		108
+#define KEY_PAGEDOWN		109
+#define KEY_INSERT		110
+#define KEY_DELETE		111
+#define KEY_MACRO		112
+#define KEY_MUTE		113
+#define KEY_VOLUMEDOWN		114
+#define KEY_VOLUMEUP		115
+#define KEY_POWER		116	/* SC System Power Down */
+#define KEY_KPEQUAL		117
+#define KEY_KPPLUSMINUS		118
+#define KEY_PAUSE		119
+#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA		121
+#define KEY_HANGEUL		122
+#define KEY_HANGUEL		KEY_HANGEUL
+#define KEY_HANJA		123
+#define KEY_YEN			124
+#define KEY_LEFTMETA		125
+#define KEY_RIGHTMETA		126
+#define KEY_COMPOSE		127
+
+#define KEY_STOP		128	/* AC Stop */
+#define KEY_AGAIN		129
+#define KEY_PROPS		130	/* AC Properties */
+#define KEY_UNDO		131	/* AC Undo */
+#define KEY_FRONT		132
+#define KEY_COPY		133	/* AC Copy */
+#define KEY_OPEN		134	/* AC Open */
+#define KEY_PASTE		135	/* AC Paste */
+#define KEY_FIND		136	/* AC Search */
+#define KEY_CUT			137	/* AC Cut */
+#define KEY_HELP		138	/* AL Integrated Help Center */
+#define KEY_MENU		139	/* Menu (show menu) */
+#define KEY_CALC		140	/* AL Calculator */
+#define KEY_SETUP		141
+#define KEY_SLEEP		142	/* SC System Sleep */
+#define KEY_WAKEUP		143	/* System Wake Up */
+#define KEY_FILE		144	/* AL Local Machine Browser */
+#define KEY_SENDFILE		145
+#define KEY_DELETEFILE		146
+#define KEY_XFER		147
+#define KEY_PROG1		148
+#define KEY_PROG2		149
+#define KEY_WWW			150	/* AL Internet Browser */
+#define KEY_MSDOS		151
+#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK		KEY_COFFEE
+#define KEY_DIRECTION		153
+#define KEY_CYCLEWINDOWS	154
+#define KEY_MAIL		155
+#define KEY_BOOKMARKS		156	/* AC Bookmarks */
+#define KEY_COMPUTER		157
+#define KEY_BACK		158	/* AC Back */
+#define KEY_FORWARD		159	/* AC Forward */
+#define KEY_CLOSECD		160
+#define KEY_EJECTCD		161
+#define KEY_EJECTCLOSECD	162
+#define KEY_NEXTSONG		163
+#define KEY_PLAYPAUSE		164
+#define KEY_PREVIOUSSONG	165
+#define KEY_STOPCD		166
+#define KEY_RECORD		167
+#define KEY_REWIND		168
+#define KEY_PHONE		169	/* Media Select Telephone */
+#define KEY_ISO			170
+#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE		172	/* AC Home */
+#define KEY_REFRESH		173	/* AC Refresh */
+#define KEY_EXIT		174	/* AC Exit */
+#define KEY_MOVE		175
+#define KEY_EDIT		176
+#define KEY_SCROLLUP		177
+#define KEY_SCROLLDOWN		178
+#define KEY_KPLEFTPAREN		179
+#define KEY_KPRIGHTPAREN	180
+#define KEY_NEW			181	/* AC New */
+#define KEY_REDO		182	/* AC Redo/Repeat */
+
+#define KEY_F13			183
+#define KEY_F14			184
+#define KEY_F15			185
+#define KEY_F16			186
+#define KEY_F17			187
+#define KEY_F18			188
+#define KEY_F19			189
+#define KEY_F20			190
+#define KEY_F21			191
+#define KEY_F22			192
+#define KEY_F23			193
+#define KEY_F24			194
+
+#define KEY_PLAYCD		200
+#define KEY_PAUSECD		201
+#define KEY_PROG3		202
+#define KEY_PROG4		203
+#define KEY_DASHBOARD		204	/* AL Dashboard */
+#define KEY_SUSPEND		205
+#define KEY_CLOSE		206	/* AC Close */
+#define KEY_PLAY		207
+#define KEY_FASTFORWARD		208
+#define KEY_BASSBOOST		209
+#define KEY_PRINT		210	/* AC Print */
+#define KEY_HP			211
+#define KEY_CAMERA		212
+#define KEY_SOUND		213
+#define KEY_QUESTION		214
+#define KEY_EMAIL		215
+#define KEY_CHAT		216
+#define KEY_SEARCH		217
+#define KEY_CONNECT		218
+#define KEY_FINANCE		219	/* AL Checkbook/Finance */
+#define KEY_SPORT		220
+#define KEY_SHOP		221
+#define KEY_ALTERASE		222
+#define KEY_CANCEL		223	/* AC Cancel */
+#define KEY_BRIGHTNESSDOWN	224
+#define KEY_BRIGHTNESSUP	225
+#define KEY_MEDIA		226
+
+#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
+					   outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE	228
+#define KEY_KBDILLUMDOWN	229
+#define KEY_KBDILLUMUP		230
+
+#define KEY_SEND		231	/* AC Send */
+#define KEY_REPLY		232	/* AC Reply */
+#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
+#define KEY_SAVE		234	/* AC Save */
+#define KEY_DOCUMENTS		235
+
+#define KEY_BATTERY		236
+
+#define KEY_BLUETOOTH		237
+#define KEY_WLAN		238
+#define KEY_UWB			239
+
+#define KEY_UNKNOWN		240
+
+#define KEY_VIDEO_NEXT		241	/* drive next video source */
+#define KEY_VIDEO_PREV		242	/* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
+#define KEY_DISPLAY_OFF		245	/* display device to off state */
+
+#define KEY_WIMAX		246
+#define KEY_RFKILL		247	/* Key that controls all radios */
+
+#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC		0x100
+#define BTN_0			0x100
+#define BTN_1			0x101
+#define BTN_2			0x102
+#define BTN_3			0x103
+#define BTN_4			0x104
+#define BTN_5			0x105
+#define BTN_6			0x106
+#define BTN_7			0x107
+#define BTN_8			0x108
+#define BTN_9			0x109
+
+#define BTN_MOUSE		0x110
+#define BTN_LEFT		0x110
+#define BTN_RIGHT		0x111
+#define BTN_MIDDLE		0x112
+#define BTN_SIDE		0x113
+#define BTN_EXTRA		0x114
+#define BTN_FORWARD		0x115
+#define BTN_BACK		0x116
+#define BTN_TASK		0x117
+
+#define BTN_JOYSTICK		0x120
+#define BTN_TRIGGER		0x120
+#define BTN_THUMB		0x121
+#define BTN_THUMB2		0x122
+#define BTN_TOP			0x123
+#define BTN_TOP2		0x124
+#define BTN_PINKIE		0x125
+#define BTN_BASE		0x126
+#define BTN_BASE2		0x127
+#define BTN_BASE3		0x128
+#define BTN_BASE4		0x129
+#define BTN_BASE5		0x12a
+#define BTN_BASE6		0x12b
+#define BTN_DEAD		0x12f
+
+#define BTN_GAMEPAD		0x130
+#define BTN_A			0x130
+#define BTN_B			0x131
+#define BTN_C			0x132
+#define BTN_X			0x133
+#define BTN_Y			0x134
+#define BTN_Z			0x135
+#define BTN_TL			0x136
+#define BTN_TR			0x137
+#define BTN_TL2			0x138
+#define BTN_TR2			0x139
+#define BTN_SELECT		0x13a
+#define BTN_START		0x13b
+#define BTN_MODE		0x13c
+#define BTN_THUMBL		0x13d
+#define BTN_THUMBR		0x13e
+
+#define BTN_DIGI		0x140
+#define BTN_TOOL_PEN		0x140
+#define BTN_TOOL_RUBBER		0x141
+#define BTN_TOOL_BRUSH		0x142
+#define BTN_TOOL_PENCIL		0x143
+#define BTN_TOOL_AIRBRUSH	0x144
+#define BTN_TOOL_FINGER		0x145
+#define BTN_TOOL_MOUSE		0x146
+#define BTN_TOOL_LENS		0x147
+#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
+#define BTN_TOUCH		0x14a
+#define BTN_STYLUS		0x14b
+#define BTN_STYLUS2		0x14c
+#define BTN_TOOL_DOUBLETAP	0x14d
+#define BTN_TOOL_TRIPLETAP	0x14e
+#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
+
+#define BTN_WHEEL		0x150
+#define BTN_GEAR_DOWN		0x150
+#define BTN_GEAR_UP		0x151
+
+#define KEY_OK			0x160
+#define KEY_SELECT		0x161
+#define KEY_GOTO		0x162
+#define KEY_CLEAR		0x163
+#define KEY_POWER2		0x164
+#define KEY_OPTION		0x165
+#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME		0x167
+#define KEY_VENDOR		0x168
+#define KEY_ARCHIVE		0x169
+#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
+#define KEY_CHANNEL		0x16b
+#define KEY_FAVORITES		0x16c
+#define KEY_EPG			0x16d
+#define KEY_PVR			0x16e	/* Media Select Home */
+#define KEY_MHP			0x16f
+#define KEY_LANGUAGE		0x170
+#define KEY_TITLE		0x171
+#define KEY_SUBTITLE		0x172
+#define KEY_ANGLE		0x173
+#define KEY_ZOOM		0x174
+#define KEY_MODE		0x175
+#define KEY_KEYBOARD		0x176
+#define KEY_SCREEN		0x177
+#define KEY_PC			0x178	/* Media Select Computer */
+#define KEY_TV			0x179	/* Media Select TV */
+#define KEY_TV2			0x17a	/* Media Select Cable */
+#define KEY_VCR			0x17b	/* Media Select VCR */
+#define KEY_VCR2		0x17c	/* VCR Plus */
+#define KEY_SAT			0x17d	/* Media Select Satellite */
+#define KEY_SAT2		0x17e
+#define KEY_CD			0x17f	/* Media Select CD */
+#define KEY_TAPE		0x180	/* Media Select Tape */
+#define KEY_RADIO		0x181
+#define KEY_TUNER		0x182	/* Media Select Tuner */
+#define KEY_PLAYER		0x183
+#define KEY_TEXT		0x184
+#define KEY_DVD			0x185	/* Media Select DVD */
+#define KEY_AUX			0x186
+#define KEY_MP3			0x187
+#define KEY_AUDIO		0x188	/* AL Audio Browser */
+#define KEY_VIDEO		0x189	/* AL Movie Browser */
+#define KEY_DIRECTORY		0x18a
+#define KEY_LIST		0x18b
+#define KEY_MEMO		0x18c	/* Media Select Messages */
+#define KEY_CALENDAR		0x18d
+#define KEY_RED			0x18e
+#define KEY_GREEN		0x18f
+#define KEY_YELLOW		0x190
+#define KEY_BLUE		0x191
+#define KEY_CHANNELUP		0x192	/* Channel Increment */
+#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
+#define KEY_FIRST		0x194
+#define KEY_LAST		0x195	/* Recall Last */
+#define KEY_AB			0x196
+#define KEY_NEXT		0x197
+#define KEY_RESTART		0x198
+#define KEY_SLOW		0x199
+#define KEY_SHUFFLE		0x19a
+#define KEY_BREAK		0x19b
+#define KEY_PREVIOUS		0x19c
+#define KEY_DIGITS		0x19d
+#define KEY_TEEN		0x19e
+#define KEY_TWEN		0x19f
+#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
+#define KEY_GAMES		0x1a1	/* Media Select Games */
+#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
+#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
+#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
+#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
+#define KEY_EDITOR		0x1a6	/* AL Text Editor */
+#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
+#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
+#define KEY_DATABASE		0x1aa	/* AL Database App */
+#define KEY_NEWS		0x1ab	/* AL Newsreader */
+#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
+#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
+#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
+#define KEY_LOGOFF		0x1b1   /* AL Logoff */
+
+#define KEY_DOLLAR		0x1b2
+#define KEY_EURO		0x1b3
+
+#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
+#define KEY_FRAMEFORWARD	0x1b5
+#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
+#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
+#define KEY_IMAGES		0x1ba	/* AL Image Browser */
+
+#define KEY_DEL_EOL		0x1c0
+#define KEY_DEL_EOS		0x1c1
+#define KEY_INS_LINE		0x1c2
+#define KEY_DEL_LINE		0x1c3
+
+#define KEY_FN			0x1d0
+#define KEY_FN_ESC		0x1d1
+#define KEY_FN_F1		0x1d2
+#define KEY_FN_F2		0x1d3
+#define KEY_FN_F3		0x1d4
+#define KEY_FN_F4		0x1d5
+#define KEY_FN_F5		0x1d6
+#define KEY_FN_F6		0x1d7
+#define KEY_FN_F7		0x1d8
+#define KEY_FN_F8		0x1d9
+#define KEY_FN_F9		0x1da
+#define KEY_FN_F10		0x1db
+#define KEY_FN_F11		0x1dc
+#define KEY_FN_F12		0x1dd
+#define KEY_FN_1		0x1de
+#define KEY_FN_2		0x1df
+#define KEY_FN_D		0x1e0
+#define KEY_FN_E		0x1e1
+#define KEY_FN_F		0x1e2
+#define KEY_FN_S		0x1e3
+#define KEY_FN_B		0x1e4
+
+#define KEY_BRL_DOT1		0x1f1
+#define KEY_BRL_DOT2		0x1f2
+#define KEY_BRL_DOT3		0x1f3
+#define KEY_BRL_DOT4		0x1f4
+#define KEY_BRL_DOT5		0x1f5
+#define KEY_BRL_DOT6		0x1f6
+#define KEY_BRL_DOT7		0x1f7
+#define KEY_BRL_DOT8		0x1f8
+#define KEY_BRL_DOT9		0x1f9
+#define KEY_BRL_DOT10		0x1fa
+
+#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
+#define KEY_NUMERIC_1		0x201	/* and other keypads */
+#define KEY_NUMERIC_2		0x202
+#define KEY_NUMERIC_3		0x203
+#define KEY_NUMERIC_4		0x204
+#define KEY_NUMERIC_5		0x205
+#define KEY_NUMERIC_6		0x206
+#define KEY_NUMERIC_7		0x207
+#define KEY_NUMERIC_8		0x208
+#define KEY_NUMERIC_9		0x209
+#define KEY_NUMERIC_STAR	0x20a
+#define KEY_NUMERIC_POUND	0x20b
+
+#define KEY_CAMERA_FOCUS	0x210
+#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON		0x213
+#define KEY_TOUCHPAD_OFF	0x214
+
+#define KEY_CAMERA_ZOOMIN	0x215
+#define KEY_CAMERA_ZOOMOUT	0x216
+#define KEY_CAMERA_UP		0x217
+#define KEY_CAMERA_DOWN		0x218
+#define KEY_CAMERA_LEFT		0x219
+#define KEY_CAMERA_RIGHT	0x21a
+
+#define BTN_TRIGGER_HAPPY		0x2c0
+#define BTN_TRIGGER_HAPPY1		0x2c0
+#define BTN_TRIGGER_HAPPY2		0x2c1
+#define BTN_TRIGGER_HAPPY3		0x2c2
+#define BTN_TRIGGER_HAPPY4		0x2c3
+#define BTN_TRIGGER_HAPPY5		0x2c4
+#define BTN_TRIGGER_HAPPY6		0x2c5
+#define BTN_TRIGGER_HAPPY7		0x2c6
+#define BTN_TRIGGER_HAPPY8		0x2c7
+#define BTN_TRIGGER_HAPPY9		0x2c8
+#define BTN_TRIGGER_HAPPY10		0x2c9
+#define BTN_TRIGGER_HAPPY11		0x2ca
+#define BTN_TRIGGER_HAPPY12		0x2cb
+#define BTN_TRIGGER_HAPPY13		0x2cc
+#define BTN_TRIGGER_HAPPY14		0x2cd
+#define BTN_TRIGGER_HAPPY15		0x2ce
+#define BTN_TRIGGER_HAPPY16		0x2cf
+#define BTN_TRIGGER_HAPPY17		0x2d0
+#define BTN_TRIGGER_HAPPY18		0x2d1
+#define BTN_TRIGGER_HAPPY19		0x2d2
+#define BTN_TRIGGER_HAPPY20		0x2d3
+#define BTN_TRIGGER_HAPPY21		0x2d4
+#define BTN_TRIGGER_HAPPY22		0x2d5
+#define BTN_TRIGGER_HAPPY23		0x2d6
+#define BTN_TRIGGER_HAPPY24		0x2d7
+#define BTN_TRIGGER_HAPPY25		0x2d8
+#define BTN_TRIGGER_HAPPY26		0x2d9
+#define BTN_TRIGGER_HAPPY27		0x2da
+#define BTN_TRIGGER_HAPPY28		0x2db
+#define BTN_TRIGGER_HAPPY29		0x2dc
+#define BTN_TRIGGER_HAPPY30		0x2dd
+#define BTN_TRIGGER_HAPPY31		0x2de
+#define BTN_TRIGGER_HAPPY32		0x2df
+#define BTN_TRIGGER_HAPPY33		0x2e0
+#define BTN_TRIGGER_HAPPY34		0x2e1
+#define BTN_TRIGGER_HAPPY35		0x2e2
+#define BTN_TRIGGER_HAPPY36		0x2e3
+#define BTN_TRIGGER_HAPPY37		0x2e4
+#define BTN_TRIGGER_HAPPY38		0x2e5
+#define BTN_TRIGGER_HAPPY39		0x2e6
+#define BTN_TRIGGER_HAPPY40		0x2e7
+
+/* We avoid low common keys in module aliases so they don't get huge. */
+#define KEY_MIN_INTERESTING	KEY_MUTE
+#define KEY_MAX			0x2ff
+#define KEY_CNT			(KEY_MAX+1)
+
+/*
+ * Relative axes
+ */
+
+#define REL_X			0x00
+#define REL_Y			0x01
+#define REL_Z			0x02
+#define REL_RX			0x03
+#define REL_RY			0x04
+#define REL_RZ			0x05
+#define REL_HWHEEL		0x06
+#define REL_DIAL		0x07
+#define REL_WHEEL		0x08
+#define REL_MISC		0x09
+#define REL_MAX			0x0f
+#define REL_CNT			(REL_MAX+1)
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X			0x00
+#define ABS_Y			0x01
+#define ABS_Z			0x02
+#define ABS_RX			0x03
+#define ABS_RY			0x04
+#define ABS_RZ			0x05
+#define ABS_THROTTLE		0x06
+#define ABS_RUDDER		0x07
+#define ABS_WHEEL		0x08
+#define ABS_GAS			0x09
+#define ABS_BRAKE		0x0a
+#define ABS_HAT0X		0x10
+#define ABS_HAT0Y		0x11
+#define ABS_HAT1X		0x12
+#define ABS_HAT1Y		0x13
+#define ABS_HAT2X		0x14
+#define ABS_HAT2Y		0x15
+#define ABS_HAT3X		0x16
+#define ABS_HAT3Y		0x17
+#define ABS_PRESSURE		0x18
+#define ABS_DISTANCE		0x19
+#define ABS_TILT_X		0x1a
+#define ABS_TILT_Y		0x1b
+#define ABS_TOOL_WIDTH		0x1c
+
+#define ABS_VOLUME		0x20
+
+#define ABS_MISC		0x28
+
+#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
+#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
+#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
+#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
+#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
+#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
+#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
+#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
+#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
+
+
+#define ABS_MAX			0x3f
+#define ABS_CNT			(ABS_MAX+1)
+
+/*
+ * Switch events
+ */
+
+#define SW_LID			0x00  /* set = lid shut */
+#define SW_TABLET_MODE		0x01  /* set = tablet mode */
+#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
+#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
+					 set = radio enabled */
+#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
+#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
+#define SW_DOCK			0x05  /* set = plugged into dock */
+#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
+#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
+#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
+#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
+#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
+#define SW_MAX			0x0f
+#define SW_CNT			(SW_MAX+1)
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL		0x00
+#define MSC_PULSELED		0x01
+#define MSC_GESTURE		0x02
+#define MSC_RAW			0x03
+#define MSC_SCAN		0x04
+#define MSC_MAX			0x07
+#define MSC_CNT			(MSC_MAX+1)
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML		0x00
+#define LED_CAPSL		0x01
+#define LED_SCROLLL		0x02
+#define LED_COMPOSE		0x03
+#define LED_KANA		0x04
+#define LED_SLEEP		0x05
+#define LED_SUSPEND		0x06
+#define LED_MUTE		0x07
+#define LED_MISC		0x08
+#define LED_MAIL		0x09
+#define LED_CHARGING		0x0a
+#define LED_MAX			0x0f
+#define LED_CNT			(LED_MAX+1)
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY		0x00
+#define REP_PERIOD		0x01
+#define REP_MAX			0x01
+#define REP_CNT			(REP_MAX+1)
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK		0x00
+#define SND_BELL		0x01
+#define SND_TONE		0x02
+#define SND_MAX			0x07
+#define SND_CNT			(SND_MAX+1)
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS			0
+#define ID_VENDOR		1
+#define ID_PRODUCT		2
+#define ID_VERSION		3
+
+#define BUS_PCI			0x01
+#define BUS_ISAPNP		0x02
+#define BUS_USB			0x03
+#define BUS_HIL			0x04
+#define BUS_BLUETOOTH		0x05
+#define BUS_VIRTUAL		0x06
+
+#define BUS_ISA			0x10
+#define BUS_I8042		0x11
+#define BUS_XTKBD		0x12
+#define BUS_RS232		0x13
+#define BUS_GAMEPORT		0x14
+#define BUS_PARPORT		0x15
+#define BUS_AMIGA		0x16
+#define BUS_ADB			0x17
+#define BUS_I2C			0x18
+#define BUS_HOST		0x19
+#define BUS_GSC			0x1A
+#define BUS_ATARI		0x1B
+#define BUS_SPI			0x1C
+
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER		0
+#define MT_TOOL_PEN		1
+#define MT_TOOL_MAX		1
+
+/*
+ * Values describing the status of a force-feedback effect
+ */
+#define FF_STATUS_STOPPED	0x00
+#define FF_STATUS_PLAYING	0x01
+#define FF_STATUS_MAX		0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * They are pieces of a bigger structure (called ff_effect)
+ */
+
+/*
+ * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
+ * should not be used and have unspecified results.
+ */
+
+/**
+ * struct ff_replay - defines scheduling of the force-feedback effect
+ * @length: duration of the effect
+ * @delay: delay before effect should start playing
+ */
+struct ff_replay {
+	__u16 length;
+	__u16 delay;
+};
+
+/**
+ * struct ff_trigger - defines what triggers the force-feedback effect
+ * @button: number of the button triggering the effect
+ * @interval: controls how soon the effect can be re-triggered
+ */
+struct ff_trigger {
+	__u16 button;
+	__u16 interval;
+};
+
+/**
+ * struct ff_envelope - generic force-feedback effect envelope
+ * @attack_length: duration of the attack (ms)
+ * @attack_level: level at the beginning of the attack
+ * @fade_length: duration of fade (ms)
+ * @fade_level: level at the end of fade
+ *
+ * The @attack_level and @fade_level are absolute values; when applying
+ * envelope force-feedback core will convert to positive/negative
+ * value based on polarity of the default level of the effect.
+ * Valid range for the attack and fade levels is 0x0000 - 0x7fff
+ */
+struct ff_envelope {
+	__u16 attack_length;
+	__u16 attack_level;
+	__u16 fade_length;
+	__u16 fade_level;
+};
+
+/**
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
+ * @level: strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_constant_effect {
+	__s16 level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
+ * @start_level: beginning strength of the effect; may be negative
+ * @end_level: final strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_ramp_effect {
+	__s16 start_level;
+	__s16 end_level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
+ * @right_saturation: maximum level when joystick moved all way to the right
+ * @left_saturation: same for the left side
+ * @right_coeff: controls how fast the force grows when the joystick moves
+ *	to the right
+ * @left_coeff: same for the left side
+ * @deadband: size of the dead zone, where no force is produced
+ * @center: position of the dead zone
+ */
+struct ff_condition_effect {
+	__u16 right_saturation;
+	__u16 left_saturation;
+
+	__s16 right_coeff;
+	__s16 left_coeff;
+
+	__u16 deadband;
+	__s16 center;
+};
+
+/**
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
+ * @waveform: kind of the effect (wave)
+ * @period: period of the wave (ms)
+ * @magnitude: peak value
+ * @offset: mean value of the wave (roughly)
+ * @phase: 'horizontal' shift
+ * @envelope: envelope data
+ * @custom_len: number of samples (FF_CUSTOM only)
+ * @custom_data: buffer of samples (FF_CUSTOM only)
+ *
+ * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
+ * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
+ * for the time being as no driver supports it yet.
+ *
+ * Note: the data pointed by custom_data is copied by the driver.
+ * You can therefore dispose of the memory after the upload/update.
+ */
+struct ff_periodic_effect {
+	__u16 waveform;
+	__u16 period;
+	__s16 magnitude;
+	__s16 offset;
+	__u16 phase;
+
+	struct ff_envelope envelope;
+
+	__u32 custom_len;
+	__s16 __user *custom_data;
+};
+
+/**
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
+ * @strong_magnitude: magnitude of the heavy motor
+ * @weak_magnitude: magnitude of the light one
+ *
+ * Some rumble pads have two motors of different weight. Strong_magnitude
+ * represents the magnitude of the vibration generated by the heavy one.
+ */
+struct ff_rumble_effect {
+	__u16 strong_magnitude;
+	__u16 weak_magnitude;
+};
+
+/**
+ * struct ff_effect - defines force feedback effect
+ * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
+ *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
+ * @id: an unique id assigned to an effect
+ * @direction: direction of the effect
+ * @trigger: trigger conditions (struct ff_trigger)
+ * @replay: scheduling of the effect (struct ff_replay)
+ * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
+ *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
+ *	defining effect parameters
+ *
+ * This structure is sent through ioctl from the application to the driver.
+ * To create a new effect application should set its @id to -1; the kernel
+ * will return assigned @id which can later be used to update or delete
+ * this effect.
+ *
+ * Direction of the effect is encoded as follows:
+ *	0 deg -> 0x0000 (down)
+ *	90 deg -> 0x4000 (left)
+ *	180 deg -> 0x8000 (up)
+ *	270 deg -> 0xC000 (right)
+ */
+struct ff_effect {
+	__u16 type;
+	__s16 id;
+	__u16 direction;
+	struct ff_trigger trigger;
+	struct ff_replay replay;
+
+	union {
+		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
+		struct ff_periodic_effect periodic;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
+	} u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE	0x50
+#define FF_PERIODIC	0x51
+#define FF_CONSTANT	0x52
+#define FF_SPRING	0x53
+#define FF_FRICTION	0x54
+#define FF_DAMPER	0x55
+#define FF_INERTIA	0x56
+#define FF_RAMP		0x57
+
+#define FF_EFFECT_MIN	FF_RUMBLE
+#define FF_EFFECT_MAX	FF_RAMP
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE	0x58
+#define FF_TRIANGLE	0x59
+#define FF_SINE		0x5a
+#define FF_SAW_UP	0x5b
+#define FF_SAW_DOWN	0x5c
+#define FF_CUSTOM	0x5d
+
+#define FF_WAVEFORM_MIN	FF_SQUARE
+#define FF_WAVEFORM_MAX	FF_CUSTOM
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN		0x60
+#define FF_AUTOCENTER	0x61
+
+#define FF_MAX		0x7f
+#define FF_CNT		(FF_MAX+1)
+
+#endif /* _UAPI_INPUT_H */
diff --git a/include/linux/ioctl.h b/include/uapi/linux/ioctl.h
similarity index 100%
rename from include/linux/ioctl.h
rename to include/uapi/linux/ioctl.h
diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h
new file mode 100644
index 0000000000000000000000000000000000000000..6cf06bfd841bc5e7c77df6cd32456309ff460d46
--- /dev/null
+++ b/include/uapi/linux/ip.h
@@ -0,0 +1,136 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP protocol.
+ *
+ * Version:	@(#)ip.h	1.0.2	04/28/93
+ *
+ * Authors:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IP_H
+#define _UAPI_LINUX_IP_H
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define IPTOS_TOS_MASK		0x1E
+#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
+#define	IPTOS_LOWDELAY		0x10
+#define	IPTOS_THROUGHPUT	0x08
+#define	IPTOS_RELIABILITY	0x04
+#define	IPTOS_MINCOST		0x02
+
+#define IPTOS_PREC_MASK		0xE0
+#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL           0xe0
+#define IPTOS_PREC_INTERNETCONTROL      0xc0
+#define IPTOS_PREC_CRITIC_ECP           0xa0
+#define IPTOS_PREC_FLASHOVERRIDE        0x80
+#define IPTOS_PREC_FLASH                0x60
+#define IPTOS_PREC_IMMEDIATE            0x40
+#define IPTOS_PREC_PRIORITY             0x20
+#define IPTOS_PREC_ROUTINE              0x00
+
+
+/* IP options */
+#define IPOPT_COPY		0x80
+#define IPOPT_CLASS_MASK	0x60
+#define IPOPT_NUMBER_MASK	0x1f
+
+#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
+#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
+#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
+
+#define	IPOPT_CONTROL		0x00
+#define	IPOPT_RESERVED1		0x20
+#define	IPOPT_MEASUREMENT	0x40
+#define	IPOPT_RESERVED2		0x60
+
+#define IPOPT_END	(0 |IPOPT_CONTROL)
+#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
+#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
+#define IPOPT_CIPSO	(6 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RR	(7 |IPOPT_CONTROL)
+#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
+
+#define IPVERSION	4
+#define MAXTTL		255
+#define IPDEFTTL	64
+
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN   1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS  IPOPT_TIMESTAMP
+
+#define	IPOPT_TS_TSONLY		0		/* timestamps only */
+#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
+#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
+
+#define IPV4_BEET_PHMAXLEN 8
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	ihl:4,
+		version:4;
+#elif defined (__BIG_ENDIAN_BITFIELD)
+	__u8	version:4,
+  		ihl:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8	tos;
+	__be16	tot_len;
+	__be16	id;
+	__be16	frag_off;
+	__u8	ttl;
+	__u8	protocol;
+	__sum16	check;
+	__be32	saddr;
+	__be32	daddr;
+	/*The options start here. */
+};
+
+
+struct ip_auth_hdr {
+	__u8  nexthdr;
+	__u8  hdrlen;		/* This one is measured in 32 bit units! */
+	__be16 reserved;
+	__be32 spi;
+	__be32 seq_no;		/* Sequence number */
+	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
+};
+
+struct ip_esp_hdr {
+	__be32 spi;
+	__be32 seq_no;		/* Sequence number */
+	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
+};
+
+struct ip_comp_hdr {
+	__u8 nexthdr;
+	__u8 flags;
+	__be16 cpi;
+};
+
+struct ip_beet_phdr {
+	__u8 nexthdr;
+	__u8 hdrlen;
+	__u8 padlen;
+	__u8 reserved;
+};
+
+#endif /* _UAPI_LINUX_IP_H */
diff --git a/include/linux/ip6_tunnel.h b/include/uapi/linux/ip6_tunnel.h
similarity index 100%
rename from include/linux/ip6_tunnel.h
rename to include/uapi/linux/ip6_tunnel.h
diff --git a/include/linux/ip_vs.h b/include/uapi/linux/ip_vs.h
similarity index 100%
rename from include/linux/ip_vs.h
rename to include/uapi/linux/ip_vs.h
diff --git a/include/uapi/linux/ipc.h b/include/uapi/linux/ipc.h
new file mode 100644
index 0000000000000000000000000000000000000000..de08dd46ddae5593c14bb6e2f5a650a75bf1445f
--- /dev/null
+++ b/include/uapi/linux/ipc.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_LINUX_IPC_H
+#define _UAPI_LINUX_IPC_H
+
+#include <linux/types.h>
+
+#define IPC_PRIVATE ((__kernel_key_t) 0)  
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct ipc_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode; 
+	unsigned short	seq;
+};
+
+/* Include the definition of ipc64_perm */
+#include <asm/ipcbuf.h>
+
+/* resource get request flags */
+#define IPC_CREAT  00001000   /* create if key is nonexistent */
+#define IPC_EXCL   00002000   /* fail if key exists */
+#define IPC_NOWAIT 00004000   /* return error on wait */
+
+/* these fields are used by the DIPC package so the kernel as standard
+   should avoid using them if possible */
+   
+#define IPC_DIPC 00010000  /* make it distributed */
+#define IPC_OWN  00020000  /* this machine is the DIPC owner */
+
+/* 
+ * Control commands used with semctl, msgctl and shmctl 
+ * see also specific commands in sem.h, msg.h and shm.h
+ */
+#define IPC_RMID 0     /* remove resource */
+#define IPC_SET  1     /* set ipc_perm options */
+#define IPC_STAT 2     /* get ipc_perm options */
+#define IPC_INFO 3     /* see ipcs */
+
+/*
+ * Version flags for semctl, msgctl, and shmctl commands
+ * These are passed as bitflags or-ed with the actual command
+ */
+#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
+			   architectures) */
+#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
+			   message sizes, etc. */
+
+/*
+ * These are used to wrap system calls.
+ *
+ * See architecture code for ugly details..
+ */
+struct ipc_kludge {
+	struct msgbuf __user *msgp;
+	long msgtyp;
+};
+
+#define SEMOP		 1
+#define SEMGET		 2
+#define SEMCTL		 3
+#define SEMTIMEDOP	 4
+#define MSGSND		11
+#define MSGRCV		12
+#define MSGGET		13
+#define MSGCTL		14
+#define SHMAT		21
+#define SHMDT		22
+#define SHMGET		23
+#define SHMCTL		24
+
+/* Used by the DIPC package, try and avoid reusing it */
+#define DIPC            25
+
+#define IPCCALL(version,op)	((version)<<16 | (op))
+
+
+#endif /* _UAPI_LINUX_IPC_H */
diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h
new file mode 100644
index 0000000000000000000000000000000000000000..33fbc99b3812d4bcd88b026f43ec0654c89a981f
--- /dev/null
+++ b/include/uapi/linux/ipmi.h
@@ -0,0 +1,456 @@
+/*
+ * ipmi.h
+ *
+ * MontaVista IPMI interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _UAPI__LINUX_IPMI_H
+#define _UAPI__LINUX_IPMI_H
+
+#include <linux/ipmi_msgdefs.h>
+#include <linux/compiler.h>
+
+/*
+ * This file describes an interface to an IPMI driver.  You have to
+ * have a fairly good understanding of IPMI to use this, so go read
+ * the specs first before actually trying to do anything.
+ *
+ * With that said, this driver provides a multi-user interface to the
+ * IPMI driver, and it allows multiple IPMI physical interfaces below
+ * the driver.  The physical interfaces bind as a lower layer on the
+ * driver.  They appear as interfaces to the application using this
+ * interface.
+ *
+ * Multi-user means that multiple applications may use the driver,
+ * send commands, receive responses, etc.  The driver keeps track of
+ * commands the user sends and tracks the responses.  The responses
+ * will go back to the application that send the command.  If the
+ * response doesn't come back in time, the driver will return a
+ * timeout error response to the application.  Asynchronous events
+ * from the BMC event queue will go to all users bound to the driver.
+ * The incoming event queue in the BMC will automatically be flushed
+ * if it becomes full and it is queried once a second to see if
+ * anything is in it.  Incoming commands to the driver will get
+ * delivered as commands.
+ *
+ * This driver provides two main interfaces: one for in-kernel
+ * applications and another for userland applications.  The
+ * capabilities are basically the same for both interface, although
+ * the interfaces are somewhat different.  The stuff in the
+ * #ifdef __KERNEL__ below is the in-kernel interface.  The userland
+ * interface is defined later in the file.  */
+
+
+
+/*
+ * This is an overlay for all the address types, so it's easy to
+ * determine the actual address type.  This is kind of like addresses
+ * work for sockets.
+ */
+#define IPMI_MAX_ADDR_SIZE 32
+struct ipmi_addr {
+	 /* Try to take these from the "Channel Medium Type" table
+	    in section 6.5 of the IPMI 1.5 manual. */
+	int   addr_type;
+	short channel;
+	char  data[IPMI_MAX_ADDR_SIZE];
+};
+
+/*
+ * When the address is not used, the type will be set to this value.
+ * The channel is the BMC's channel number for the channel (usually
+ * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
+ */
+#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
+struct ipmi_system_interface_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char lun;
+};
+
+/* An IPMB Address. */
+#define IPMI_IPMB_ADDR_TYPE		0x01
+/* Used for broadcast get device id as described in section 17.9 of the
+   IPMI 1.5 manual. */
+#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
+struct ipmi_ipmb_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char slave_addr;
+	unsigned char lun;
+};
+
+/*
+ * A LAN Address.  This is an address to/from a LAN interface bridged
+ * by the BMC, not an address actually out on the LAN.
+ *
+ * A conscious decision was made here to deviate slightly from the IPMI
+ * spec.  We do not use rqSWID and rsSWID like it shows in the
+ * message.  Instead, we use remote_SWID and local_SWID.  This means
+ * that any message (a request or response) from another device will
+ * always have exactly the same address.  If you didn't do this,
+ * requests and responses from the same device would have different
+ * addresses, and that's not too cool.
+ *
+ * In this address, the remote_SWID is always the SWID the remote
+ * message came from, or the SWID we are sending the message to.
+ * local_SWID is always our SWID.  Note that having our SWID in the
+ * message is a little weird, but this is required.
+ */
+#define IPMI_LAN_ADDR_TYPE		0x04
+struct ipmi_lan_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char privilege;
+	unsigned char session_handle;
+	unsigned char remote_SWID;
+	unsigned char local_SWID;
+	unsigned char lun;
+};
+
+
+/*
+ * Channel for talking directly with the BMC.  When using this
+ * channel, This is for the system interface address type only.  FIXME
+ * - is this right, or should we use -1?
+ */
+#define IPMI_BMC_CHANNEL  0xf
+#define IPMI_NUM_CHANNELS 0x10
+
+/*
+ * Used to signify an "all channel" bitmask.  This is more than the
+ * actual number of channels because this is used in userland and
+ * will cover us if the number of channels is extended.
+ */
+#define IPMI_CHAN_ALL     (~0)
+
+
+/*
+ * A raw IPMI message without any addressing.  This covers both
+ * commands and responses.  The completion code is always the first
+ * byte of data in the response (as the spec shows the messages laid
+ * out).
+ */
+struct ipmi_msg {
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  __user *data;
+};
+
+struct kernel_ipmi_msg {
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  *data;
+};
+
+/*
+ * Various defines that are useful for IPMI applications.
+ */
+#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
+#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
+#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
+
+
+/*
+ * Receive types for messages coming from the receive interface.  This
+ * is used for the receive in-kernel interface and in the receive
+ * IOCTL.
+ *
+ * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
+ * it allows you to get the message results when you send a response
+ * message.
+ */
+#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
+#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
+#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
+#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
+					      a sent response, giving any
+					      error status for sending the
+					      response.  When you send a
+					      response message, this will
+					      be returned. */
+#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
+
+/* Note that async events and received commands do not have a completion
+   code as the first byte of the incoming data, unlike a response. */
+
+
+/*
+ * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
+ * setting is the default and means it will be set on certain
+ * commands.  Hard setting it on and off will override automatic
+ * operation.
+ */
+#define IPMI_MAINTENANCE_MODE_AUTO	0
+#define IPMI_MAINTENANCE_MODE_OFF	1
+#define IPMI_MAINTENANCE_MODE_ON	2
+
+
+
+/*
+ * The userland interface
+ */
+
+/*
+ * The userland interface for the IPMI driver is a standard character
+ * device, with each instance of an interface registered as a minor
+ * number under the major character device.
+ *
+ * The read and write calls do not work, to get messages in and out
+ * requires ioctl calls because of the complexity of the data.  select
+ * and poll do work, so you can wait for input using the file
+ * descriptor, you just can use read to get it.
+ *
+ * In general, you send a command down to the interface and receive
+ * responses back.  You can use the msgid value to correlate commands
+ * and responses, the driver will take care of figuring out which
+ * incoming messages are for which command and find the proper msgid
+ * value to report.  You will only receive reponses for commands you
+ * send.  Asynchronous events, however, go to all open users, so you
+ * must be ready to handle these (or ignore them if you don't care).
+ *
+ * The address type depends upon the channel type.  When talking
+ * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
+ * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
+ * supply a valid IPMB address with the addr_type set properly.
+ *
+ * When talking to normal channels, the driver takes care of the
+ * details of formatting and sending messages on that channel.  You do
+ * not, for instance, have to format a send command, you just send
+ * whatever command you want to the channel, the driver will create
+ * the send command, automatically issue receive command and get even
+ * commands, and pass those up to the proper user.
+ */
+
+
+/* The magic IOCTL value for this interface. */
+#define IPMI_IOC_MAGIC 'i'
+
+
+/* Messages sent to the interface are this format. */
+struct ipmi_req {
+	unsigned char __user *addr; /* Address to send the message to. */
+	unsigned int  addr_len;
+
+	long    msgid; /* The sequence number for the message.  This
+			  exact value will be reported back in the
+			  response to this request if it is a command.
+			  If it is a response, this will be used as
+			  the sequence value for the response.  */
+
+	struct ipmi_msg msg;
+};
+/*
+ * Send a message to the interfaces.  error values are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
+					     struct ipmi_req)
+
+/* Messages sent to the interface with timing parameters are this
+   format. */
+struct ipmi_req_settime {
+	struct ipmi_req req;
+
+	/* See ipmi_request_settime() above for details on these
+	   values. */
+	int          retries;
+	unsigned int retry_time_ms;
+};
+/*
+ * Send a message to the interfaces with timing parameters.  error values
+ * are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
+					     struct ipmi_req_settime)
+
+/* Messages received from the interface are this format. */
+struct ipmi_recv {
+	int     recv_type; /* Is this a command, response or an
+			      asyncronous event. */
+
+	unsigned char __user *addr;    /* Address the message was from is put
+				   here.  The caller must supply the
+				   memory. */
+	unsigned int  addr_len; /* The size of the address buffer.
+				   The caller supplies the full buffer
+				   length, this value is updated to
+				   the actual message length when the
+				   message is received. */
+
+	long    msgid; /* The sequence number specified in the request
+			  if this is a response.  If this is a command,
+			  this will be the sequence number from the
+			  command. */
+
+	struct ipmi_msg msg; /* The data field must point to a buffer.
+				The data_size field must be set to the
+				size of the message buffer.  The
+				caller supplies the full buffer
+				length, this value is updated to the
+				actual message length when the message
+				is received. */
+};
+
+/*
+ * Receive a message.  error values:
+ *  - EAGAIN - no messages in the queue.
+ *  - EFAULT - an address supplied was invalid.
+ *  - EINVAL - The address supplied was not valid.
+ *  - EMSGSIZE - The message to was too large to fit into the message buffer,
+ *               the message will be left in the buffer. */
+#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
+					      struct ipmi_recv)
+
+/*
+ * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
+ * will truncate the contents instead of leaving the data in the
+ * buffer.
+ */
+#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
+					      struct ipmi_recv)
+
+/* Register to get commands from other entities on this interface. */
+struct ipmi_cmdspec {
+	unsigned char netfn;
+	unsigned char cmd;
+};
+
+/*
+ * Register to receive a specific command.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - The netfn/cmd supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
+					     struct ipmi_cmdspec)
+/*
+ * Unregister a regsitered command.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - The netfn/cmd was not found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
+					     struct ipmi_cmdspec)
+
+/*
+ * Register to get commands from other entities on specific channels.
+ * This way, you can only listen on specific channels, or have messages
+ * from some channels go to one place and other channels to someplace
+ * else.  The chans field is a bitmask, (1 << channel) for each channel.
+ * It may be IPMI_CHAN_ALL for all channels.
+ */
+struct ipmi_cmdspec_chans {
+	unsigned int netfn;
+	unsigned int cmd;
+	unsigned int chans;
+};
+
+/*
+ * Register to receive a specific command on specific channels.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
+					     struct ipmi_cmdspec_chans)
+/*
+ * Unregister some netfn/cmd/chans.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
+					     struct ipmi_cmdspec_chans)
+
+/*
+ * Set whether this interface receives events.  Note that the first
+ * user registered for events will get all pending events for the
+ * interface.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ */
+#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
+
+/*
+ * Set and get the slave address and LUN that we will use for our
+ * source messages.  Note that this affects the interface, not just
+ * this user, so it will affect all users of this interface.  This is
+ * so some initialization code can come in and do the OEM-specific
+ * things it takes to determine your address (if not the BMC) and set
+ * it for everyone else.  You should probably leave the LUN alone.
+ */
+struct ipmi_channel_lun_address_set {
+	unsigned short channel;
+	unsigned char  value;
+};
+#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
+#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
+/* Legacy interfaces, these only set IPMB 0. */
+#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
+#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
+#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
+#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
+
+/*
+ * Get/set the default timing values for an interface.  You shouldn't
+ * generally mess with these.
+ */
+struct ipmi_timing_parms {
+	int          retries;
+	unsigned int retry_time_ms;
+};
+#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
+					     struct ipmi_timing_parms)
+#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
+					     struct ipmi_timing_parms)
+
+/*
+ * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
+ * for a description of what this does.
+ */
+#define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
+#define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
+
+#endif /* _UAPI__LINUX_IPMI_H */
diff --git a/include/linux/ipmi_msgdefs.h b/include/uapi/linux/ipmi_msgdefs.h
similarity index 100%
rename from include/linux/ipmi_msgdefs.h
rename to include/uapi/linux/ipmi_msgdefs.h
diff --git a/include/linux/ipsec.h b/include/uapi/linux/ipsec.h
similarity index 100%
rename from include/linux/ipsec.h
rename to include/uapi/linux/ipsec.h
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
new file mode 100644
index 0000000000000000000000000000000000000000..a6d7d1c536c33708b84b88661184d4256299450d
--- /dev/null
+++ b/include/uapi/linux/ipv6.h
@@ -0,0 +1,164 @@
+#ifndef _UAPI_IPV6_H
+#define _UAPI_IPV6_H
+
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <asm/byteorder.h>
+
+/* The latest drafts declared increase in minimal mtu up to 1280. */
+
+#define IPV6_MIN_MTU	1280
+
+/*
+ *	Advanced API
+ *	source interface/address selection, source routing, etc...
+ *	*under construction*
+ */
+
+
+struct in6_pktinfo {
+	struct in6_addr	ipi6_addr;
+	int		ipi6_ifindex;
+};
+
+struct ip6_mtuinfo {
+	struct sockaddr_in6	ip6m_addr;
+	__u32			ip6m_mtu;
+};
+
+struct in6_ifreq {
+	struct in6_addr	ifr6_addr;
+	__u32		ifr6_prefixlen;
+	int		ifr6_ifindex; 
+};
+
+#define IPV6_SRCRT_STRICT	0x01	/* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_0	0	/* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_2	2	/* IPv6 type 2 Routing Header	*/
+
+/*
+ *	routing header
+ */
+struct ipv6_rt_hdr {
+	__u8		nexthdr;
+	__u8		hdrlen;
+	__u8		type;
+	__u8		segments_left;
+
+	/*
+	 *	type specific data
+	 *	variable length field
+	 */
+};
+
+
+struct ipv6_opt_hdr {
+	__u8 		nexthdr;
+	__u8 		hdrlen;
+	/* 
+	 * TLV encoded option data follows.
+	 */
+} __attribute__((packed));	/* required for some archs */
+
+#define ipv6_destopt_hdr ipv6_opt_hdr
+#define ipv6_hopopt_hdr  ipv6_opt_hdr
+
+
+/*
+ *	routing header type 0 (used in cmsghdr struct)
+ */
+
+struct rt0_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			reserved;
+	struct in6_addr		addr[0];
+
+#define rt0_type		rt_hdr.type
+};
+
+/*
+ *	routing header type 2
+ */
+
+struct rt2_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			reserved;
+	struct in6_addr		addr;
+
+#define rt2_type		rt_hdr.type
+};
+
+/*
+ *	home address option in destination options header
+ */
+
+struct ipv6_destopt_hao {
+	__u8			type;
+	__u8			length;
+	struct in6_addr		addr;
+} __attribute__((packed));
+
+/*
+ *	IPv6 fixed header
+ *
+ *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
+ *	are glued to priority now, forming "class".
+ */
+
+struct ipv6hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			priority:4,
+				version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8			version:4,
+				priority:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8			flow_lbl[3];
+
+	__be16			payload_len;
+	__u8			nexthdr;
+	__u8			hop_limit;
+
+	struct	in6_addr	saddr;
+	struct	in6_addr	daddr;
+};
+
+
+/* index values for the variables in ipv6_devconf */
+enum {
+	DEVCONF_FORWARDING = 0,
+	DEVCONF_HOPLIMIT,
+	DEVCONF_MTU6,
+	DEVCONF_ACCEPT_RA,
+	DEVCONF_ACCEPT_REDIRECTS,
+	DEVCONF_AUTOCONF,
+	DEVCONF_DAD_TRANSMITS,
+	DEVCONF_RTR_SOLICITS,
+	DEVCONF_RTR_SOLICIT_INTERVAL,
+	DEVCONF_RTR_SOLICIT_DELAY,
+	DEVCONF_USE_TEMPADDR,
+	DEVCONF_TEMP_VALID_LFT,
+	DEVCONF_TEMP_PREFERED_LFT,
+	DEVCONF_REGEN_MAX_RETRY,
+	DEVCONF_MAX_DESYNC_FACTOR,
+	DEVCONF_MAX_ADDRESSES,
+	DEVCONF_FORCE_MLD_VERSION,
+	DEVCONF_ACCEPT_RA_DEFRTR,
+	DEVCONF_ACCEPT_RA_PINFO,
+	DEVCONF_ACCEPT_RA_RTR_PREF,
+	DEVCONF_RTR_PROBE_INTERVAL,
+	DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
+	DEVCONF_PROXY_NDP,
+	DEVCONF_OPTIMISTIC_DAD,
+	DEVCONF_ACCEPT_SOURCE_ROUTE,
+	DEVCONF_MC_FORWARDING,
+	DEVCONF_DISABLE_IPV6,
+	DEVCONF_ACCEPT_DAD,
+	DEVCONF_FORCE_TLLAO,
+	DEVCONF_MAX
+};
+
+
+#endif /* _UAPI_IPV6_H */
diff --git a/include/uapi/linux/ipv6_route.h b/include/uapi/linux/ipv6_route.h
new file mode 100644
index 0000000000000000000000000000000000000000..0459664c263690a5f4ed7f6e77fd97faf543eafe
--- /dev/null
+++ b/include/uapi/linux/ipv6_route.h
@@ -0,0 +1,58 @@
+/*
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IPV6_ROUTE_H
+#define _UAPI_LINUX_IPV6_ROUTE_H
+
+#include <linux/types.h>
+
+#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
+#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
+					   fallback, no routers on link */
+#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
+#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
+#define RTF_ANYCAST	0x00100000	/* Anycast			*/
+
+#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
+#define RTF_EXPIRES	0x00400000
+
+#define RTF_ROUTEINFO	0x00800000	/* route information - RA	*/
+
+#define RTF_CACHE	0x01000000	/* cache entry			*/
+#define RTF_FLOW	0x02000000	/* flow significant route	*/
+#define RTF_POLICY	0x04000000	/* policy route			*/
+
+#define RTF_PREF(pref)	((pref) << 27)
+#define RTF_PREF_MASK	0x18000000
+
+#define RTF_LOCAL	0x80000000
+
+
+struct in6_rtmsg {
+	struct in6_addr		rtmsg_dst;
+	struct in6_addr		rtmsg_src;
+	struct in6_addr		rtmsg_gateway;
+	__u32			rtmsg_type;
+	__u16			rtmsg_dst_len;
+	__u16			rtmsg_src_len;
+	__u32			rtmsg_metric;
+	unsigned long		rtmsg_info;
+        __u32			rtmsg_flags;
+	int			rtmsg_ifindex;
+};
+
+#define RTMSG_NEWDEVICE		0x11
+#define RTMSG_DELDEVICE		0x12
+#define RTMSG_NEWROUTE		0x21
+#define RTMSG_DELROUTE		0x22
+
+#endif /* _UAPI_LINUX_IPV6_ROUTE_H */
diff --git a/include/linux/ipx.h b/include/uapi/linux/ipx.h
similarity index 100%
rename from include/linux/ipx.h
rename to include/uapi/linux/ipx.h
diff --git a/include/linux/irda.h b/include/uapi/linux/irda.h
similarity index 100%
rename from include/linux/irda.h
rename to include/uapi/linux/irda.h
diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h
new file mode 100644
index 0000000000000000000000000000000000000000..e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
diff --git a/include/uapi/linux/isdn.h b/include/uapi/linux/isdn.h
new file mode 100644
index 0000000000000000000000000000000000000000..eb1995fffc396efb51f823889b62d75082f1247d
--- /dev/null
+++ b/include/uapi/linux/isdn.h
@@ -0,0 +1,143 @@
+/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $
+ *
+ * Main header for the Linux ISDN subsystem (linklevel).
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI__ISDN_H__
+#define _UAPI__ISDN_H__
+
+#include <linux/ioctl.h>
+#include <linux/tty.h>
+
+#define ISDN_MAX_DRIVERS    32
+#define ISDN_MAX_CHANNELS   64
+
+/* New ioctl-codes */
+#define IIOCNETAIF  _IO('I',1)
+#define IIOCNETDIF  _IO('I',2)
+#define IIOCNETSCF  _IO('I',3)
+#define IIOCNETGCF  _IO('I',4)
+#define IIOCNETANM  _IO('I',5)
+#define IIOCNETDNM  _IO('I',6)
+#define IIOCNETGNM  _IO('I',7)
+#define IIOCGETSET  _IO('I',8) /* no longer supported */
+#define IIOCSETSET  _IO('I',9) /* no longer supported */
+#define IIOCSETVER  _IO('I',10)
+#define IIOCNETHUP  _IO('I',11)
+#define IIOCSETGST  _IO('I',12)
+#define IIOCSETBRJ  _IO('I',13)
+#define IIOCSIGPRF  _IO('I',14)
+#define IIOCGETPRF  _IO('I',15)
+#define IIOCSETPRF  _IO('I',16)
+#define IIOCGETMAP  _IO('I',17)
+#define IIOCSETMAP  _IO('I',18)
+#define IIOCNETASL  _IO('I',19)
+#define IIOCNETDIL  _IO('I',20)
+#define IIOCGETCPS  _IO('I',21)
+#define IIOCGETDVR  _IO('I',22)
+#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
+#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
+
+#define IIOCNETALN  _IO('I',32)
+#define IIOCNETDLN  _IO('I',33)
+
+#define IIOCNETGPN  _IO('I',34)
+
+#define IIOCDBGVAR  _IO('I',127)
+
+#define IIOCDRVCTL  _IO('I',128)
+
+/* cisco hdlck device private ioctls */
+#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
+#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
+#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
+#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
+
+/* Packet encapsulations for net-interfaces */
+#define ISDN_NET_ENCAP_ETHER      0
+#define ISDN_NET_ENCAP_RAWIP      1
+#define ISDN_NET_ENCAP_IPTYP      2
+#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
+#define ISDN_NET_ENCAP_SYNCPPP    4
+#define ISDN_NET_ENCAP_UIHDLC     5
+#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
+#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt */
+#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
+
+/* Facility which currently uses an ISDN-channel */
+#define ISDN_USAGE_NONE       0
+#define ISDN_USAGE_RAW        1
+#define ISDN_USAGE_MODEM      2
+#define ISDN_USAGE_NET        3
+#define ISDN_USAGE_VOICE      4
+#define ISDN_USAGE_FAX        5
+#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
+#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
+#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
+#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
+
+#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
+#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
+#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
+
+#define ISDN_MSNLEN          32
+#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
+#define TTY_DV 0x06  /* Data version for iprofd etc.          */
+
+#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
+
+typedef struct {
+  char drvid[25];
+  unsigned long arg;
+} isdn_ioctl_struct;
+
+typedef struct {
+  char name[10];
+  char phone[ISDN_MSNLEN];
+  int  outgoing;
+} isdn_net_ioctl_phone;
+
+typedef struct {
+  char name[10];     /* Name of interface                     */
+  char master[10];   /* Name of Master for Bundling           */
+  char slave[10];    /* Name of Slave for Bundling            */
+  char eaz[256];     /* EAZ/MSN                               */
+  char drvid[25];    /* DriverId for Bindings                 */
+  int  onhtime;      /* Hangup-Timeout                        */
+  int  charge;       /* Charge-Units                          */
+  int  l2_proto;     /* Layer-2 protocol                      */
+  int  l3_proto;     /* Layer-3 protocol                      */
+  int  p_encap;      /* Encapsulation                         */
+  int  exclusive;    /* Channel, if bound exclusive           */
+  int  dialmax;      /* Dial Retry-Counter                    */
+  int  slavedelay;   /* Delay until slave starts up           */
+  int  cbdelay;      /* Delay before Callback                 */
+  int  chargehup;    /* Flag: Charge-Hangup                   */
+  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
+  int  secure;       /* Flag: Secure                          */
+  int  callback;     /* Flag: Callback                        */
+  int  cbhup;        /* Flag: Reject Call before Callback     */
+  int  pppbind;      /* ippp device for bindings              */
+  int  chargeint;    /* Use fixed charge interval length      */
+  int  triggercps;   /* BogoCPS needed for triggering slave   */
+  int  dialtimeout;  /* Dial-Timeout                          */
+  int  dialwait;     /* Time to wait after failed dial        */
+  int  dialmode;     /* Flag: off / on / auto                 */
+} isdn_net_ioctl_cfg;
+
+#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
+#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
+#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
+#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
+#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
+
+
+#endif /* _UAPI__ISDN_H__ */
diff --git a/include/uapi/linux/isdn_divertif.h b/include/uapi/linux/isdn_divertif.h
new file mode 100644
index 0000000000000000000000000000000000000000..3e3c2d898416a5db8ad3737df2bc2f3f8fc64be3
--- /dev/null
+++ b/include/uapi/linux/isdn_divertif.h
@@ -0,0 +1,30 @@
+/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ *
+ * Header for the diversion supplementary interface for i4l.
+ *
+ * Author    Werner Cornelius (werner@titro.de)
+ * Copyright by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ISDN_DIVERTIF_H
+#define _UAPI_LINUX_ISDN_DIVERTIF_H
+
+/***********************************************************/
+/* magic value is also used to control version information */
+/***********************************************************/
+#define DIVERT_IF_MAGIC 0x25873401
+#define DIVERT_CMD_REG  0x00  /* register command */
+#define DIVERT_CMD_REL  0x01  /* release command */
+#define DIVERT_NO_ERR   0x00  /* return value no error */
+#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
+#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
+#define DIVERT_REG_ERR  0x03  /* module already registered */
+#define DIVERT_REL_ERR  0x04  /* module not registered */
+#define DIVERT_REG_NAME isdn_register_divert
+
+
+#endif /* _UAPI_LINUX_ISDN_DIVERTIF_H */
diff --git a/include/uapi/linux/isdn_ppp.h b/include/uapi/linux/isdn_ppp.h
new file mode 100644
index 0000000000000000000000000000000000000000..e7d7bd2aed3f02785a7aa35f274ceacb328e7e9c
--- /dev/null
+++ b/include/uapi/linux/isdn_ppp.h
@@ -0,0 +1,67 @@
+/* Linux ISDN subsystem, sync PPP, interface to ipppd
+ *
+ * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * Copyright 2000-2002  by Kai Germaschewski (kai@germaschewski.name)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ISDN_PPP_H
+#define _UAPI_LINUX_ISDN_PPP_H
+
+#define CALLTYPE_INCOMING 0x1
+#define CALLTYPE_OUTGOING 0x2
+#define CALLTYPE_CALLBACK 0x4
+
+#define IPPP_VERSION    "2.2.0"
+
+struct pppcallinfo
+{
+  int calltype;
+  unsigned char local_num[64];
+  unsigned char remote_num[64];
+  int charge_units;
+};
+
+#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
+#define PPPIOCBUNDLE   _IOW('t',129,int)
+#define PPPIOCGMPFLAGS _IOR('t',130,int)
+#define PPPIOCSMPFLAGS _IOW('t',131,int)
+#define PPPIOCSMPMTU   _IOW('t',132,int)
+#define PPPIOCSMPMRU   _IOW('t',133,int)
+#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
+#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
+#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
+
+
+#define SC_MP_PROT       0x00000200
+#define SC_REJ_MP_PROT   0x00000400
+#define SC_OUT_SHORT_SEQ 0x00000800
+#define SC_IN_SHORT_SEQ  0x00004000
+
+#define SC_DECOMP_ON		0x01
+#define SC_COMP_ON		0x02
+#define SC_DECOMP_DISCARD	0x04
+#define SC_COMP_DISCARD		0x08
+#define SC_LINK_DECOMP_ON	0x10
+#define SC_LINK_COMP_ON		0x20
+#define SC_LINK_DECOMP_DISCARD	0x40
+#define SC_LINK_COMP_DISCARD	0x80
+
+#define ISDN_PPP_COMP_MAX_OPTIONS 16
+
+#define IPPP_COMP_FLAG_XMIT 0x1
+#define IPPP_COMP_FLAG_LINK 0x2
+
+struct isdn_ppp_comp_data {
+  int num;
+  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
+  int optlen;
+  int flags;
+};
+
+#endif /* _UAPI_LINUX_ISDN_PPP_H */
diff --git a/include/uapi/linux/isdnif.h b/include/uapi/linux/isdnif.h
new file mode 100644
index 0000000000000000000000000000000000000000..246138c01c4dc7fc19e0f933076d387bec4b579e
--- /dev/null
+++ b/include/uapi/linux/isdnif.h
@@ -0,0 +1,56 @@
+/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Linux ISDN subsystem
+ * Definition of the interface between the subsystem and its low-level drivers.
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI__ISDNIF_H__
+#define _UAPI__ISDNIF_H__
+
+
+/*
+ * Values for general protocol-selection
+ */
+#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
+#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
+#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
+#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
+#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
+#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
+
+/*
+ * Values for Layer-2-protocol-selection
+ */
+#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
+#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
+#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
+#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
+#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
+#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
+#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
+#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
+#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
+#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
+#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
+#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
+
+/*
+ * Values for Layer-3-protocol-selection
+ */
+#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
+#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
+#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
+#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
+#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
+
+
+#endif /* _UAPI__ISDNIF_H__ */
diff --git a/include/linux/iso_fs.h b/include/uapi/linux/iso_fs.h
similarity index 100%
rename from include/linux/iso_fs.h
rename to include/uapi/linux/iso_fs.h
diff --git a/include/linux/ivtv.h b/include/uapi/linux/ivtv.h
similarity index 100%
rename from include/linux/ivtv.h
rename to include/uapi/linux/ivtv.h
diff --git a/include/linux/ivtvfb.h b/include/uapi/linux/ivtvfb.h
similarity index 100%
rename from include/linux/ivtvfb.h
rename to include/uapi/linux/ivtvfb.h
diff --git a/include/linux/ixjuser.h b/include/uapi/linux/ixjuser.h
similarity index 100%
rename from include/linux/ixjuser.h
rename to include/uapi/linux/ixjuser.h
diff --git a/include/linux/jffs2.h b/include/uapi/linux/jffs2.h
similarity index 100%
rename from include/linux/jffs2.h
rename to include/uapi/linux/jffs2.h
diff --git a/include/uapi/linux/joystick.h b/include/uapi/linux/joystick.h
new file mode 100644
index 0000000000000000000000000000000000000000..b856fd11c70ebfc7475d74fb698c372bd7910ec9
--- /dev/null
+++ b/include/uapi/linux/joystick.h
@@ -0,0 +1,136 @@
+/*
+ *  Copyright (C) 1996-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI_LINUX_JOYSTICK_H
+#define _UAPI_LINUX_JOYSTICK_H
+
+
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+/*
+ * Version
+ */
+
+#define JS_VERSION		0x020100
+
+/*
+ * Types and constants for reading from /dev/js
+ */
+
+#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
+#define JS_EVENT_AXIS		0x02	/* joystick moved */
+#define JS_EVENT_INIT		0x80	/* initial state of device */
+
+struct js_event {
+	__u32 time;	/* event timestamp in milliseconds */
+	__s16 value;	/* value */
+	__u8 type;	/* event type */
+	__u8 number;	/* axis/button number */
+};
+
+/*
+ * IOCTL commands for joystick driver
+ */
+
+#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
+
+#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
+#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
+#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
+
+#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
+#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
+
+#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_CNT])			/* set axis mapping */
+#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_CNT])			/* get axis mapping */
+#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
+#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
+
+/*
+ * Types and constants for get/set correction
+ */
+
+#define JS_CORR_NONE		0x00	/* returns raw values */
+#define JS_CORR_BROKEN		0x01	/* broken line */
+
+struct js_corr {
+	__s32 coef[8];
+	__s16 prec;
+	__u16 type;
+};
+
+/*
+ * v0.x compatibility definitions
+ */
+
+#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
+#define JS_TRUE			1
+#define JS_FALSE		0
+#define JS_X_0			0x01
+#define JS_Y_0			0x02
+#define JS_X_1			0x04
+#define JS_Y_1			0x08
+#define JS_MAX			2
+
+#define JS_DEF_TIMEOUT		0x1300
+#define JS_DEF_CORR		0
+#define JS_DEF_TIMELIMIT	10L
+
+#define JS_SET_CAL		1
+#define JS_GET_CAL		2
+#define JS_SET_TIMEOUT		3
+#define JS_GET_TIMEOUT		4
+#define JS_SET_TIMELIMIT	5
+#define JS_GET_TIMELIMIT	6
+#define JS_GET_ALL		7
+#define JS_SET_ALL		8
+
+struct JS_DATA_TYPE {
+	__s32 buttons;
+	__s32 x;
+	__s32 y;
+};
+
+struct JS_DATA_SAVE_TYPE_32 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s32 JS_EXPIRETIME;
+	__s32 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+struct JS_DATA_SAVE_TYPE_64 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s64 JS_EXPIRETIME;
+	__s64 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+
+#endif /* _UAPI_LINUX_JOYSTICK_H */
diff --git a/include/uapi/linux/kd.h b/include/uapi/linux/kd.h
new file mode 100644
index 0000000000000000000000000000000000000000..87b7cc439d7c5adc51a8653630f3d3de1671a1aa
--- /dev/null
+++ b/include/uapi/linux/kd.h
@@ -0,0 +1,183 @@
+#ifndef _UAPI_LINUX_KD_H
+#define _UAPI_LINUX_KD_H
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* 0x4B is 'K', to avoid collision with termios and vt */
+
+#define GIO_FONT	0x4B60	/* gets font in expanded form */
+#define PIO_FONT	0x4B61	/* use font in expanded form */
+
+#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
+#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
+struct consolefontdesc {
+	unsigned short charcount;	/* characters in font (256 or 512) */
+	unsigned short charheight;	/* scan lines per character (1-32) */
+	char __user *chardata;		/* font data in expanded form */
+};
+
+#define PIO_FONTRESET   0x4B6D	/* reset to default font */
+
+#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
+#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
+
+#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
+#define KDMKTONE	0x4B30	/* generate tone */
+
+#define KDGETLED	0x4B31	/* return current led state */
+#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
+#define 	LED_SCR		0x01	/* scroll lock led */
+#define 	LED_NUM		0x02	/* num lock led */
+#define 	LED_CAP		0x04	/* caps lock led */
+
+#define KDGKBTYPE	0x4B33	/* get keyboard type */
+#define 	KB_84		0x01
+#define 	KB_101		0x02 	/* this is what we always answer */
+#define 	KB_OTHER	0x03
+
+#define KDADDIO		0x4B34	/* add i/o port as valid */
+#define KDDELIO		0x4B35	/* del i/o port as valid */
+#define KDENABIO	0x4B36	/* enable i/o to video board */
+#define KDDISABIO	0x4B37	/* disable i/o to video board */
+
+#define KDSETMODE	0x4B3A	/* set text/graphics mode */
+#define		KD_TEXT		0x00
+#define		KD_GRAPHICS	0x01
+#define		KD_TEXT0	0x02	/* obsolete */
+#define		KD_TEXT1	0x03	/* obsolete */
+#define KDGETMODE	0x4B3B	/* get current mode */
+
+#define KDMAPDISP	0x4B3C	/* map display into address space */
+#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
+
+typedef char scrnmap_t;
+#define		E_TABSZ		256
+#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
+#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
+#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
+#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
+
+#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
+struct unipair {
+	unsigned short unicode;
+	unsigned short fontpos;
+};
+struct unimapdesc {
+	unsigned short entry_ct;
+	struct unipair __user *entries;
+};
+#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
+#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
+struct unimapinit {
+	unsigned short advised_hashsize;  /* 0 if no opinion */
+	unsigned short advised_hashstep;  /* 0 if no opinion */
+	unsigned short advised_hashlevel; /* 0 if no opinion */
+};
+
+#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
+#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
+
+#define		K_RAW		0x00
+#define		K_XLATE		0x01
+#define		K_MEDIUMRAW	0x02
+#define		K_UNICODE	0x03
+#define		K_OFF		0x04
+#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
+#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
+
+#define		K_METABIT	0x03
+#define		K_ESCPREFIX	0x04
+#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
+#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
+
+#define		K_SCROLLLOCK	0x01
+#define		K_NUMLOCK	0x02
+#define		K_CAPSLOCK	0x04
+#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
+#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
+
+struct kbentry {
+	unsigned char kb_table;
+	unsigned char kb_index;
+	unsigned short kb_value;
+};
+#define		K_NORMTAB	0x00
+#define		K_SHIFTTAB	0x01
+#define		K_ALTTAB	0x02
+#define		K_ALTSHIFTTAB	0x03
+
+#define KDGKBENT	0x4B46	/* gets one entry in translation table */
+#define KDSKBENT	0x4B47	/* sets one entry in translation table */
+
+struct kbsentry {
+	unsigned char kb_func;
+	unsigned char kb_string[512];
+};
+#define KDGKBSENT	0x4B48	/* gets one function key string entry */
+#define KDSKBSENT	0x4B49	/* sets one function key string entry */
+
+struct kbdiacr {
+        unsigned char diacr, base, result;
+};
+struct kbdiacrs {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
+#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
+
+struct kbdiacruc {
+	unsigned int diacr, base, result;
+};
+struct kbdiacrsuc {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacruc kbdiacruc[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACRUC    0x4BFA  /* read kernel accent table - UCS */
+#define KDSKBDIACRUC    0x4BFB  /* write kernel accent table - UCS */
+
+struct kbkeycode {
+	unsigned int scancode, keycode;
+};
+#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
+#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
+
+#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
+
+struct kbd_repeat {
+	int delay;	/* in msec; <= 0: don't change */
+	int period;	/* in msec; <= 0: don't change */
+			/* earlier this field was misnamed "rate" */
+};
+
+#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
+				 * actually used values are returned */
+
+#define KDFONTOP	0x4B72	/* font operations */
+
+struct console_font_op {
+	unsigned int op;	/* operation code KD_FONT_OP_* */
+	unsigned int flags;	/* KD_FONT_FLAG_* */
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char __user *data;	/* font data with height fixed to 32 */
+};
+
+struct console_font {
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char *data;	/* font data with height fixed to 32 */
+};
+
+#define KD_FONT_OP_SET		0	/* Set font */
+#define KD_FONT_OP_GET		1	/* Get font */
+#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
+#define KD_FONT_OP_COPY		3	/* Copy from another console */
+
+#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
+
+/* note: 0x4B00-0x4B4E all have had a value at some time;
+   don't reuse for the time being */
+/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
+
+#endif /* _UAPI_LINUX_KD_H */
diff --git a/include/uapi/linux/kdev_t.h b/include/uapi/linux/kdev_t.h
new file mode 100644
index 0000000000000000000000000000000000000000..0d881fa7eb9ccf2e22ea005485eb1c9fce39e00f
--- /dev/null
+++ b/include/uapi/linux/kdev_t.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_KDEV_T_H
+#define _UAPI_LINUX_KDEV_T_H
+#ifndef __KERNEL__
+
+/*
+Some programs want their definitions of MAJOR and MINOR and MKDEV
+from the kernel sources. These must be the externally visible ones.
+*/
+#define MAJOR(dev)	((dev)>>8)
+#define MINOR(dev)	((dev) & 0xff)
+#define MKDEV(ma,mi)	((ma)<<8 | (mi))
+#endif /* __KERNEL__ */
+#endif /* _UAPI_LINUX_KDEV_T_H */
diff --git a/include/uapi/linux/kernel-page-flags.h b/include/uapi/linux/kernel-page-flags.h
new file mode 100644
index 0000000000000000000000000000000000000000..5116a0e48172fd27110bdbcda32189473853cb9e
--- /dev/null
+++ b/include/uapi/linux/kernel-page-flags.h
@@ -0,0 +1,36 @@
+#ifndef _UAPILINUX_KERNEL_PAGE_FLAGS_H
+#define _UAPILINUX_KERNEL_PAGE_FLAGS_H
+
+/*
+ * Stable page flag bits exported to user space
+ */
+
+#define KPF_LOCKED		0
+#define KPF_ERROR		1
+#define KPF_REFERENCED		2
+#define KPF_UPTODATE		3
+#define KPF_DIRTY		4
+#define KPF_LRU			5
+#define KPF_ACTIVE		6
+#define KPF_SLAB		7
+#define KPF_WRITEBACK		8
+#define KPF_RECLAIM		9
+#define KPF_BUDDY		10
+
+/* 11-20: new additions in 2.6.31 */
+#define KPF_MMAP		11
+#define KPF_ANON		12
+#define KPF_SWAPCACHE		13
+#define KPF_SWAPBACKED		14
+#define KPF_COMPOUND_HEAD	15
+#define KPF_COMPOUND_TAIL	16
+#define KPF_HUGE		17
+#define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
+#define KPF_NOPAGE		20
+
+#define KPF_KSM			21
+#define KPF_THP			22
+
+
+#endif /* _UAPILINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/uapi/linux/kernel.h b/include/uapi/linux/kernel.h
new file mode 100644
index 0000000000000000000000000000000000000000..321e399457f55cdbec5dca462ea26c85b3f7560c
--- /dev/null
+++ b/include/uapi/linux/kernel.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_KERNEL_H
+#define _UAPI_LINUX_KERNEL_H
+
+#include <linux/sysinfo.h>
+
+/*
+ * 'kernel.h' contains some often-used function prototypes etc
+ */
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+
+
+#endif /* _UAPI_LINUX_KERNEL_H */
diff --git a/include/uapi/linux/kernelcapi.h b/include/uapi/linux/kernelcapi.h
new file mode 100644
index 0000000000000000000000000000000000000000..89bf40d36d2a4d77109a3efccd571029a8b66b96
--- /dev/null
+++ b/include/uapi/linux/kernelcapi.h
@@ -0,0 +1,47 @@
+/*
+ * $Id: kernelcapi.h,v 1.8.6.2 2001/02/07 11:31:31 kai Exp $
+ * 
+ * Kernel CAPI 2.0 Interface for Linux
+ * 
+ * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ * 
+ */
+
+#ifndef _UAPI__KERNELCAPI_H__
+#define _UAPI__KERNELCAPI_H__
+
+#define CAPI_MAXAPPL	240	/* maximum number of applications  */
+#define CAPI_MAXCONTR	32	/* maximum number of controller    */
+#define CAPI_MAXDATAWINDOW	8
+
+
+typedef struct kcapi_flagdef {
+	int contr;
+	int flag;
+} kcapi_flagdef;
+
+typedef struct kcapi_carddef {
+	char		driver[32];
+	unsigned int	port;
+	unsigned	irq;
+	unsigned int	membase;
+	int		cardnr;
+} kcapi_carddef;
+
+/* new ioctls >= 10 */
+#define KCAPI_CMD_TRACE		10
+#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
+
+/* 
+ * flag > 2 => trace also data
+ * flag & 1 => show trace
+ */
+#define KCAPI_TRACE_OFF			0
+#define KCAPI_TRACE_SHORT_NO_DATA	1
+#define KCAPI_TRACE_FULL_NO_DATA	2
+#define KCAPI_TRACE_SHORT		3
+#define KCAPI_TRACE_FULL		4
+
+
+
+#endif /* _UAPI__KERNELCAPI_H__ */
diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h
new file mode 100644
index 0000000000000000000000000000000000000000..104838f65bc184cf46531e3335492668a822789e
--- /dev/null
+++ b/include/uapi/linux/kexec.h
@@ -0,0 +1,54 @@
+#ifndef _UAPILINUX_KEXEC_H
+#define _UAPILINUX_KEXEC_H
+
+/* kexec system call -  It loads the new kernel to boot into.
+ * kexec does not sync, or unmount filesystems so if you need
+ * that to happen you need to do that yourself.
+ */
+
+#include <linux/types.h>
+
+/* kexec flags for different usage scenarios */
+#define KEXEC_ON_CRASH		0x00000001
+#define KEXEC_PRESERVE_CONTEXT	0x00000002
+#define KEXEC_ARCH_MASK		0xffff0000
+
+/* These values match the ELF architecture values.
+ * Unless there is a good reason that should continue to be the case.
+ */
+#define KEXEC_ARCH_DEFAULT ( 0 << 16)
+#define KEXEC_ARCH_386     ( 3 << 16)
+#define KEXEC_ARCH_X86_64  (62 << 16)
+#define KEXEC_ARCH_PPC     (20 << 16)
+#define KEXEC_ARCH_PPC64   (21 << 16)
+#define KEXEC_ARCH_IA_64   (50 << 16)
+#define KEXEC_ARCH_ARM     (40 << 16)
+#define KEXEC_ARCH_S390    (22 << 16)
+#define KEXEC_ARCH_SH      (42 << 16)
+#define KEXEC_ARCH_MIPS_LE (10 << 16)
+#define KEXEC_ARCH_MIPS    ( 8 << 16)
+
+/* The artificial cap on the number of segments passed to kexec_load. */
+#define KEXEC_SEGMENT_MAX 16
+
+#ifndef __KERNEL__
+/*
+ * This structure is used to hold the arguments that are used when
+ * loading  kernel binaries.
+ */
+struct kexec_segment {
+	const void *buf;
+	size_t bufsz;
+	const void *mem;
+	size_t memsz;
+};
+
+/* Load a new kernel image as described by the kexec_segment array
+ * consisting of passed number of segments at the entry-point address.
+ * The flags allow different useage types.
+ */
+extern int kexec_load(void *, size_t, struct kexec_segment *,
+		unsigned long int);
+#endif /* __KERNEL__ */
+
+#endif /* _UAPILINUX_KEXEC_H */
diff --git a/include/uapi/linux/keyboard.h b/include/uapi/linux/keyboard.h
new file mode 100644
index 0000000000000000000000000000000000000000..5a6849721ab6187667e61bff7300ecee5b16e017
--- /dev/null
+++ b/include/uapi/linux/keyboard.h
@@ -0,0 +1,443 @@
+#ifndef _UAPI__LINUX_KEYBOARD_H
+#define _UAPI__LINUX_KEYBOARD_H
+
+#include <linux/wait.h>
+
+#define KG_SHIFT	0
+#define KG_CTRL		2
+#define KG_ALT		3
+#define KG_ALTGR	1
+#define KG_SHIFTL	4
+#define KG_KANASHIFT	4
+#define KG_SHIFTR	5
+#define KG_CTRLL	6
+#define KG_CTRLR	7
+#define KG_CAPSSHIFT	8
+
+#define NR_SHIFT	9
+
+#define NR_KEYS		256
+#define MAX_NR_KEYMAPS	256
+/* This means 128Kb if all keymaps are allocated. Only the superuser
+	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
+#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
+
+
+#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
+
+#define KT_LATIN	0	/* we depend on this being zero */
+#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
+#define KT_FN		1
+#define KT_SPEC		2
+#define KT_PAD		3
+#define KT_DEAD		4
+#define KT_CONS		5
+#define KT_CUR		6
+#define KT_SHIFT	7
+#define KT_META		8
+#define KT_ASCII	9
+#define KT_LOCK		10
+#define KT_SLOCK	12
+#define KT_DEAD2	13
+#define KT_BRL		14
+
+#define K(t,v)		(((t)<<8)|(v))
+#define KTYP(x)		((x) >> 8)
+#define KVAL(x)		((x) & 0xff)
+
+#define K_F1		K(KT_FN,0)
+#define K_F2		K(KT_FN,1)
+#define K_F3		K(KT_FN,2)
+#define K_F4		K(KT_FN,3)
+#define K_F5		K(KT_FN,4)
+#define K_F6		K(KT_FN,5)
+#define K_F7		K(KT_FN,6)
+#define K_F8		K(KT_FN,7)
+#define K_F9		K(KT_FN,8)
+#define K_F10		K(KT_FN,9)
+#define K_F11		K(KT_FN,10)
+#define K_F12		K(KT_FN,11)
+#define K_F13		K(KT_FN,12)
+#define K_F14		K(KT_FN,13)
+#define K_F15		K(KT_FN,14)
+#define K_F16		K(KT_FN,15)
+#define K_F17		K(KT_FN,16)
+#define K_F18		K(KT_FN,17)
+#define K_F19		K(KT_FN,18)
+#define K_F20		K(KT_FN,19)
+#define K_FIND		K(KT_FN,20)
+#define K_INSERT	K(KT_FN,21)
+#define K_REMOVE	K(KT_FN,22)
+#define K_SELECT	K(KT_FN,23)
+#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
+#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
+#define K_MACRO	 	K(KT_FN,26)
+#define K_HELP		K(KT_FN,27)
+#define K_DO		K(KT_FN,28)
+#define K_PAUSE	 	K(KT_FN,29)
+#define K_F21		K(KT_FN,30)
+#define K_F22		K(KT_FN,31)
+#define K_F23		K(KT_FN,32)
+#define K_F24		K(KT_FN,33)
+#define K_F25		K(KT_FN,34)
+#define K_F26		K(KT_FN,35)
+#define K_F27		K(KT_FN,36)
+#define K_F28		K(KT_FN,37)
+#define K_F29		K(KT_FN,38)
+#define K_F30		K(KT_FN,39)
+#define K_F31		K(KT_FN,40)
+#define K_F32		K(KT_FN,41)
+#define K_F33		K(KT_FN,42)
+#define K_F34		K(KT_FN,43)
+#define K_F35		K(KT_FN,44)
+#define K_F36		K(KT_FN,45)
+#define K_F37		K(KT_FN,46)
+#define K_F38		K(KT_FN,47)
+#define K_F39		K(KT_FN,48)
+#define K_F40		K(KT_FN,49)
+#define K_F41		K(KT_FN,50)
+#define K_F42		K(KT_FN,51)
+#define K_F43		K(KT_FN,52)
+#define K_F44		K(KT_FN,53)
+#define K_F45		K(KT_FN,54)
+#define K_F46		K(KT_FN,55)
+#define K_F47		K(KT_FN,56)
+#define K_F48		K(KT_FN,57)
+#define K_F49		K(KT_FN,58)
+#define K_F50		K(KT_FN,59)
+#define K_F51		K(KT_FN,60)
+#define K_F52		K(KT_FN,61)
+#define K_F53		K(KT_FN,62)
+#define K_F54		K(KT_FN,63)
+#define K_F55		K(KT_FN,64)
+#define K_F56		K(KT_FN,65)
+#define K_F57		K(KT_FN,66)
+#define K_F58		K(KT_FN,67)
+#define K_F59		K(KT_FN,68)
+#define K_F60		K(KT_FN,69)
+#define K_F61		K(KT_FN,70)
+#define K_F62		K(KT_FN,71)
+#define K_F63		K(KT_FN,72)
+#define K_F64		K(KT_FN,73)
+#define K_F65		K(KT_FN,74)
+#define K_F66		K(KT_FN,75)
+#define K_F67		K(KT_FN,76)
+#define K_F68		K(KT_FN,77)
+#define K_F69		K(KT_FN,78)
+#define K_F70		K(KT_FN,79)
+#define K_F71		K(KT_FN,80)
+#define K_F72		K(KT_FN,81)
+#define K_F73		K(KT_FN,82)
+#define K_F74		K(KT_FN,83)
+#define K_F75		K(KT_FN,84)
+#define K_F76		K(KT_FN,85)
+#define K_F77		K(KT_FN,86)
+#define K_F78		K(KT_FN,87)
+#define K_F79		K(KT_FN,88)
+#define K_F80		K(KT_FN,89)
+#define K_F81		K(KT_FN,90)
+#define K_F82		K(KT_FN,91)
+#define K_F83		K(KT_FN,92)
+#define K_F84		K(KT_FN,93)
+#define K_F85		K(KT_FN,94)
+#define K_F86		K(KT_FN,95)
+#define K_F87		K(KT_FN,96)
+#define K_F88		K(KT_FN,97)
+#define K_F89		K(KT_FN,98)
+#define K_F90		K(KT_FN,99)
+#define K_F91		K(KT_FN,100)
+#define K_F92		K(KT_FN,101)
+#define K_F93		K(KT_FN,102)
+#define K_F94		K(KT_FN,103)
+#define K_F95		K(KT_FN,104)
+#define K_F96		K(KT_FN,105)
+#define K_F97		K(KT_FN,106)
+#define K_F98		K(KT_FN,107)
+#define K_F99		K(KT_FN,108)
+#define K_F100		K(KT_FN,109)
+#define K_F101		K(KT_FN,110)
+#define K_F102		K(KT_FN,111)
+#define K_F103		K(KT_FN,112)
+#define K_F104		K(KT_FN,113)
+#define K_F105		K(KT_FN,114)
+#define K_F106		K(KT_FN,115)
+#define K_F107		K(KT_FN,116)
+#define K_F108		K(KT_FN,117)
+#define K_F109		K(KT_FN,118)
+#define K_F110		K(KT_FN,119)
+#define K_F111		K(KT_FN,120)
+#define K_F112		K(KT_FN,121)
+#define K_F113		K(KT_FN,122)
+#define K_F114		K(KT_FN,123)
+#define K_F115		K(KT_FN,124)
+#define K_F116		K(KT_FN,125)
+#define K_F117		K(KT_FN,126)
+#define K_F118		K(KT_FN,127)
+#define K_F119		K(KT_FN,128)
+#define K_F120		K(KT_FN,129)
+#define K_F121		K(KT_FN,130)
+#define K_F122		K(KT_FN,131)
+#define K_F123		K(KT_FN,132)
+#define K_F124		K(KT_FN,133)
+#define K_F125		K(KT_FN,134)
+#define K_F126		K(KT_FN,135)
+#define K_F127		K(KT_FN,136)
+#define K_F128		K(KT_FN,137)
+#define K_F129		K(KT_FN,138)
+#define K_F130		K(KT_FN,139)
+#define K_F131		K(KT_FN,140)
+#define K_F132		K(KT_FN,141)
+#define K_F133		K(KT_FN,142)
+#define K_F134		K(KT_FN,143)
+#define K_F135		K(KT_FN,144)
+#define K_F136		K(KT_FN,145)
+#define K_F137		K(KT_FN,146)
+#define K_F138		K(KT_FN,147)
+#define K_F139		K(KT_FN,148)
+#define K_F140		K(KT_FN,149)
+#define K_F141		K(KT_FN,150)
+#define K_F142		K(KT_FN,151)
+#define K_F143		K(KT_FN,152)
+#define K_F144		K(KT_FN,153)
+#define K_F145		K(KT_FN,154)
+#define K_F146		K(KT_FN,155)
+#define K_F147		K(KT_FN,156)
+#define K_F148		K(KT_FN,157)
+#define K_F149		K(KT_FN,158)
+#define K_F150		K(KT_FN,159)
+#define K_F151		K(KT_FN,160)
+#define K_F152		K(KT_FN,161)
+#define K_F153		K(KT_FN,162)
+#define K_F154		K(KT_FN,163)
+#define K_F155		K(KT_FN,164)
+#define K_F156		K(KT_FN,165)
+#define K_F157		K(KT_FN,166)
+#define K_F158		K(KT_FN,167)
+#define K_F159		K(KT_FN,168)
+#define K_F160		K(KT_FN,169)
+#define K_F161		K(KT_FN,170)
+#define K_F162		K(KT_FN,171)
+#define K_F163		K(KT_FN,172)
+#define K_F164		K(KT_FN,173)
+#define K_F165		K(KT_FN,174)
+#define K_F166		K(KT_FN,175)
+#define K_F167		K(KT_FN,176)
+#define K_F168		K(KT_FN,177)
+#define K_F169		K(KT_FN,178)
+#define K_F170		K(KT_FN,179)
+#define K_F171		K(KT_FN,180)
+#define K_F172		K(KT_FN,181)
+#define K_F173		K(KT_FN,182)
+#define K_F174		K(KT_FN,183)
+#define K_F175		K(KT_FN,184)
+#define K_F176		K(KT_FN,185)
+#define K_F177		K(KT_FN,186)
+#define K_F178		K(KT_FN,187)
+#define K_F179		K(KT_FN,188)
+#define K_F180		K(KT_FN,189)
+#define K_F181		K(KT_FN,190)
+#define K_F182		K(KT_FN,191)
+#define K_F183		K(KT_FN,192)
+#define K_F184		K(KT_FN,193)
+#define K_F185		K(KT_FN,194)
+#define K_F186		K(KT_FN,195)
+#define K_F187		K(KT_FN,196)
+#define K_F188		K(KT_FN,197)
+#define K_F189		K(KT_FN,198)
+#define K_F190		K(KT_FN,199)
+#define K_F191		K(KT_FN,200)
+#define K_F192		K(KT_FN,201)
+#define K_F193		K(KT_FN,202)
+#define K_F194		K(KT_FN,203)
+#define K_F195		K(KT_FN,204)
+#define K_F196		K(KT_FN,205)
+#define K_F197		K(KT_FN,206)
+#define K_F198		K(KT_FN,207)
+#define K_F199		K(KT_FN,208)
+#define K_F200		K(KT_FN,209)
+#define K_F201		K(KT_FN,210)
+#define K_F202		K(KT_FN,211)
+#define K_F203		K(KT_FN,212)
+#define K_F204		K(KT_FN,213)
+#define K_F205		K(KT_FN,214)
+#define K_F206		K(KT_FN,215)
+#define K_F207		K(KT_FN,216)
+#define K_F208		K(KT_FN,217)
+#define K_F209		K(KT_FN,218)
+#define K_F210		K(KT_FN,219)
+#define K_F211		K(KT_FN,220)
+#define K_F212		K(KT_FN,221)
+#define K_F213		K(KT_FN,222)
+#define K_F214		K(KT_FN,223)
+#define K_F215		K(KT_FN,224)
+#define K_F216		K(KT_FN,225)
+#define K_F217		K(KT_FN,226)
+#define K_F218		K(KT_FN,227)
+#define K_F219		K(KT_FN,228)
+#define K_F220		K(KT_FN,229)
+#define K_F221		K(KT_FN,230)
+#define K_F222		K(KT_FN,231)
+#define K_F223		K(KT_FN,232)
+#define K_F224		K(KT_FN,233)
+#define K_F225		K(KT_FN,234)
+#define K_F226		K(KT_FN,235)
+#define K_F227		K(KT_FN,236)
+#define K_F228		K(KT_FN,237)
+#define K_F229		K(KT_FN,238)
+#define K_F230		K(KT_FN,239)
+#define K_F231		K(KT_FN,240)
+#define K_F232		K(KT_FN,241)
+#define K_F233		K(KT_FN,242)
+#define K_F234		K(KT_FN,243)
+#define K_F235		K(KT_FN,244)
+#define K_F236		K(KT_FN,245)
+#define K_F237		K(KT_FN,246)
+#define K_F238		K(KT_FN,247)
+#define K_F239		K(KT_FN,248)
+#define K_F240		K(KT_FN,249)
+#define K_F241		K(KT_FN,250)
+#define K_F242		K(KT_FN,251)
+#define K_F243		K(KT_FN,252)
+#define K_F244		K(KT_FN,253)
+#define K_F245		K(KT_FN,254)
+#define K_UNDO		K(KT_FN,255)
+
+
+#define K_HOLE		K(KT_SPEC,0)
+#define K_ENTER		K(KT_SPEC,1)
+#define K_SH_REGS	K(KT_SPEC,2)
+#define K_SH_MEM	K(KT_SPEC,3)
+#define K_SH_STAT	K(KT_SPEC,4)
+#define K_BREAK		K(KT_SPEC,5)
+#define K_CONS		K(KT_SPEC,6)
+#define K_CAPS		K(KT_SPEC,7)
+#define K_NUM		K(KT_SPEC,8)
+#define K_HOLD		K(KT_SPEC,9)
+#define K_SCROLLFORW	K(KT_SPEC,10)
+#define K_SCROLLBACK	K(KT_SPEC,11)
+#define K_BOOT		K(KT_SPEC,12)
+#define K_CAPSON	K(KT_SPEC,13)
+#define K_COMPOSE	K(KT_SPEC,14)
+#define K_SAK		K(KT_SPEC,15)
+#define K_DECRCONSOLE	K(KT_SPEC,16)
+#define K_INCRCONSOLE	K(KT_SPEC,17)
+#define K_SPAWNCONSOLE	K(KT_SPEC,18)
+#define K_BARENUMLOCK	K(KT_SPEC,19)
+
+#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
+#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
+
+#define K_P0		K(KT_PAD,0)
+#define K_P1		K(KT_PAD,1)
+#define K_P2		K(KT_PAD,2)
+#define K_P3		K(KT_PAD,3)
+#define K_P4		K(KT_PAD,4)
+#define K_P5		K(KT_PAD,5)
+#define K_P6		K(KT_PAD,6)
+#define K_P7		K(KT_PAD,7)
+#define K_P8		K(KT_PAD,8)
+#define K_P9		K(KT_PAD,9)
+#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
+#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
+#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
+#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
+#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
+#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
+#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
+#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
+#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
+#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
+
+#define NR_PAD		20
+
+#define K_DGRAVE	K(KT_DEAD,0)
+#define K_DACUTE	K(KT_DEAD,1)
+#define K_DCIRCM	K(KT_DEAD,2)
+#define K_DTILDE	K(KT_DEAD,3)
+#define K_DDIERE	K(KT_DEAD,4)
+#define K_DCEDIL	K(KT_DEAD,5)
+
+#define NR_DEAD		6
+
+#define K_DOWN		K(KT_CUR,0)
+#define K_LEFT		K(KT_CUR,1)
+#define K_RIGHT		K(KT_CUR,2)
+#define K_UP		K(KT_CUR,3)
+
+#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
+#define K_CTRL		K(KT_SHIFT,KG_CTRL)
+#define K_ALT		K(KT_SHIFT,KG_ALT)
+#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
+#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
+#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
+#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
+#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
+#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
+
+#define K_ASC0		K(KT_ASCII,0)
+#define K_ASC1		K(KT_ASCII,1)
+#define K_ASC2		K(KT_ASCII,2)
+#define K_ASC3		K(KT_ASCII,3)
+#define K_ASC4		K(KT_ASCII,4)
+#define K_ASC5		K(KT_ASCII,5)
+#define K_ASC6		K(KT_ASCII,6)
+#define K_ASC7		K(KT_ASCII,7)
+#define K_ASC8		K(KT_ASCII,8)
+#define K_ASC9		K(KT_ASCII,9)
+#define K_HEX0		K(KT_ASCII,10)
+#define K_HEX1		K(KT_ASCII,11)
+#define K_HEX2		K(KT_ASCII,12)
+#define K_HEX3		K(KT_ASCII,13)
+#define K_HEX4		K(KT_ASCII,14)
+#define K_HEX5		K(KT_ASCII,15)
+#define K_HEX6		K(KT_ASCII,16)
+#define K_HEX7		K(KT_ASCII,17)
+#define K_HEX8		K(KT_ASCII,18)
+#define K_HEX9		K(KT_ASCII,19)
+#define K_HEXa		K(KT_ASCII,20)
+#define K_HEXb		K(KT_ASCII,21)
+#define K_HEXc		K(KT_ASCII,22)
+#define K_HEXd		K(KT_ASCII,23)
+#define K_HEXe		K(KT_ASCII,24)
+#define K_HEXf		K(KT_ASCII,25)
+
+#define NR_ASCII	26
+
+#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
+#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
+#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
+#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
+#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
+#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
+#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
+#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
+#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
+
+#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
+#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
+#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
+#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
+#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
+#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
+#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
+#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
+#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
+
+#define NR_LOCK		9
+
+#define K_BRL_BLANK     K(KT_BRL, 0)
+#define K_BRL_DOT1      K(KT_BRL, 1)
+#define K_BRL_DOT2      K(KT_BRL, 2)
+#define K_BRL_DOT3      K(KT_BRL, 3)
+#define K_BRL_DOT4      K(KT_BRL, 4)
+#define K_BRL_DOT5      K(KT_BRL, 5)
+#define K_BRL_DOT6      K(KT_BRL, 6)
+#define K_BRL_DOT7      K(KT_BRL, 7)
+#define K_BRL_DOT8      K(KT_BRL, 8)
+#define K_BRL_DOT9      K(KT_BRL, 9)
+#define K_BRL_DOT10     K(KT_BRL, 10)
+
+#define NR_BRL		11
+
+#define MAX_DIACR	256
+#endif /* _UAPI__LINUX_KEYBOARD_H */
diff --git a/include/linux/keyctl.h b/include/uapi/linux/keyctl.h
similarity index 100%
rename from include/linux/keyctl.h
rename to include/uapi/linux/keyctl.h
diff --git a/include/linux/kvm.h b/include/uapi/linux/kvm.h
similarity index 100%
rename from include/linux/kvm.h
rename to include/uapi/linux/kvm.h
diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h
new file mode 100644
index 0000000000000000000000000000000000000000..cea2c5c72d268bbaedbbf2802b4a84136bf90917
--- /dev/null
+++ b/include/uapi/linux/kvm_para.h
@@ -0,0 +1,28 @@
+#ifndef _UAPI__LINUX_KVM_PARA_H
+#define _UAPI__LINUX_KVM_PARA_H
+
+/*
+ * This header file provides a method for making a hypercall to the host
+ * Architectures should define:
+ * - kvm_hypercall0, kvm_hypercall1...
+ * - kvm_arch_para_features
+ * - kvm_para_available
+ */
+
+/* Return values for hypercalls */
+#define KVM_ENOSYS		1000
+#define KVM_EFAULT		EFAULT
+#define KVM_E2BIG		E2BIG
+#define KVM_EPERM		EPERM
+
+#define KVM_HC_VAPIC_POLL_IRQ		1
+#define KVM_HC_MMU_OP			2
+#define KVM_HC_FEATURES			3
+#define KVM_HC_PPC_MAP_MAGIC_PAGE	4
+
+/*
+ * hypercalls use architecture specific
+ */
+#include <asm/kvm_para.h>
+
+#endif /* _UAPI__LINUX_KVM_PARA_H */
diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h
new file mode 100644
index 0000000000000000000000000000000000000000..8adb681603273c287f25be055c0258c8a2a73c65
--- /dev/null
+++ b/include/uapi/linux/l2tp.h
@@ -0,0 +1,180 @@
+/*
+ * L2TP-over-IP socket for L2TPv3.
+ *
+ * Author: James Chapman <jchapman@katalix.com>
+ */
+
+#ifndef _UAPI_LINUX_L2TP_H_
+#define _UAPI_LINUX_L2TP_H_
+
+#include <linux/types.h>
+#include <linux/socket.h>
+#ifndef __KERNEL__
+#include <netinet/in.h>
+#endif
+
+#define IPPROTO_L2TP		115
+
+/**
+ * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
+ * @l2tp_family:  address family number AF_L2TPIP.
+ * @l2tp_addr:    protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_l2tpip {
+	/* The first fields must match struct sockaddr_in */
+	__kernel_sa_family_t l2tp_family; /* AF_INET */
+	__be16		l2tp_unused;	/* INET port number (unused) */
+	struct in_addr	l2tp_addr;	/* Internet address */
+
+	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
+
+	/* Pad to size of `struct sockaddr'. */
+	unsigned char	__pad[sizeof(struct sockaddr) -
+			      sizeof(__kernel_sa_family_t) -
+			      sizeof(__be16) - sizeof(struct in_addr) -
+			      sizeof(__u32)];
+};
+
+/**
+ * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
+ * @l2tp_family:  address family number AF_L2TPIP.
+ * @l2tp_addr:    protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+struct sockaddr_l2tpip6 {
+	/* The first fields must match struct sockaddr_in6 */
+	__kernel_sa_family_t l2tp_family; /* AF_INET6 */
+	__be16		l2tp_unused;	/* INET port number (unused) */
+	__be32		l2tp_flowinfo;	/* IPv6 flow information */
+	struct in6_addr	l2tp_addr;	/* IPv6 address */
+	__u32		l2tp_scope_id;	/* scope id (new in RFC2553) */
+	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
+};
+
+/*****************************************************************************
+ *  NETLINK_GENERIC netlink family.
+ *****************************************************************************/
+
+/*
+ * Commands.
+ * Valid TLVs of each command are:-
+ * TUNNEL_CREATE	- CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
+ * TUNNEL_DELETE	- CONN_ID
+ * TUNNEL_MODIFY	- CONN_ID, udpcsum
+ * TUNNEL_GETSTATS	- CONN_ID, (stats)
+ * TUNNEL_GET		- CONN_ID, (...)
+ * SESSION_CREATE	- SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
+ * SESSION_DELETE	- SESSION_ID
+ * SESSION_MODIFY	- SESSION_ID, data_seq
+ * SESSION_GET		- SESSION_ID, (...)
+ * SESSION_GETSTATS	- SESSION_ID, (stats)
+ *
+ */
+enum {
+	L2TP_CMD_NOOP,
+	L2TP_CMD_TUNNEL_CREATE,
+	L2TP_CMD_TUNNEL_DELETE,
+	L2TP_CMD_TUNNEL_MODIFY,
+	L2TP_CMD_TUNNEL_GET,
+	L2TP_CMD_SESSION_CREATE,
+	L2TP_CMD_SESSION_DELETE,
+	L2TP_CMD_SESSION_MODIFY,
+	L2TP_CMD_SESSION_GET,
+	__L2TP_CMD_MAX,
+};
+
+#define L2TP_CMD_MAX			(__L2TP_CMD_MAX - 1)
+
+/*
+ * ATTR types defined for L2TP
+ */
+enum {
+	L2TP_ATTR_NONE,			/* no data */
+	L2TP_ATTR_PW_TYPE,		/* u16, enum l2tp_pwtype */
+	L2TP_ATTR_ENCAP_TYPE,		/* u16, enum l2tp_encap_type */
+	L2TP_ATTR_OFFSET,		/* u16 */
+	L2TP_ATTR_DATA_SEQ,		/* u16 */
+	L2TP_ATTR_L2SPEC_TYPE,		/* u8, enum l2tp_l2spec_type */
+	L2TP_ATTR_L2SPEC_LEN,		/* u8, enum l2tp_l2spec_type */
+	L2TP_ATTR_PROTO_VERSION,	/* u8 */
+	L2TP_ATTR_IFNAME,		/* string */
+	L2TP_ATTR_CONN_ID,		/* u32 */
+	L2TP_ATTR_PEER_CONN_ID,		/* u32 */
+	L2TP_ATTR_SESSION_ID,		/* u32 */
+	L2TP_ATTR_PEER_SESSION_ID,	/* u32 */
+	L2TP_ATTR_UDP_CSUM,		/* u8 */
+	L2TP_ATTR_VLAN_ID,		/* u16 */
+	L2TP_ATTR_COOKIE,		/* 0, 4 or 8 bytes */
+	L2TP_ATTR_PEER_COOKIE,		/* 0, 4 or 8 bytes */
+	L2TP_ATTR_DEBUG,		/* u32 */
+	L2TP_ATTR_RECV_SEQ,		/* u8 */
+	L2TP_ATTR_SEND_SEQ,		/* u8 */
+	L2TP_ATTR_LNS_MODE,		/* u8 */
+	L2TP_ATTR_USING_IPSEC,		/* u8 */
+	L2TP_ATTR_RECV_TIMEOUT,		/* msec */
+	L2TP_ATTR_FD,			/* int */
+	L2TP_ATTR_IP_SADDR,		/* u32 */
+	L2TP_ATTR_IP_DADDR,		/* u32 */
+	L2TP_ATTR_UDP_SPORT,		/* u16 */
+	L2TP_ATTR_UDP_DPORT,		/* u16 */
+	L2TP_ATTR_MTU,			/* u16 */
+	L2TP_ATTR_MRU,			/* u16 */
+	L2TP_ATTR_STATS,		/* nested */
+	L2TP_ATTR_IP6_SADDR,		/* struct in6_addr */
+	L2TP_ATTR_IP6_DADDR,		/* struct in6_addr */
+	__L2TP_ATTR_MAX,
+};
+
+#define L2TP_ATTR_MAX			(__L2TP_ATTR_MAX - 1)
+
+/* Nested in L2TP_ATTR_STATS */
+enum {
+	L2TP_ATTR_STATS_NONE,		/* no data */
+	L2TP_ATTR_TX_PACKETS,		/* u64 */
+	L2TP_ATTR_TX_BYTES,		/* u64 */
+	L2TP_ATTR_TX_ERRORS,		/* u64 */
+	L2TP_ATTR_RX_PACKETS,		/* u64 */
+	L2TP_ATTR_RX_BYTES,		/* u64 */
+	L2TP_ATTR_RX_SEQ_DISCARDS,	/* u64 */
+	L2TP_ATTR_RX_OOS_PACKETS,	/* u64 */
+	L2TP_ATTR_RX_ERRORS,		/* u64 */
+	__L2TP_ATTR_STATS_MAX,
+};
+
+#define L2TP_ATTR_STATS_MAX		(__L2TP_ATTR_STATS_MAX - 1)
+
+enum l2tp_pwtype {
+	L2TP_PWTYPE_NONE = 0x0000,
+	L2TP_PWTYPE_ETH_VLAN = 0x0004,
+	L2TP_PWTYPE_ETH = 0x0005,
+	L2TP_PWTYPE_PPP = 0x0007,
+	L2TP_PWTYPE_PPP_AC = 0x0008,
+	L2TP_PWTYPE_IP = 0x000b,
+	__L2TP_PWTYPE_MAX
+};
+
+enum l2tp_l2spec_type {
+	L2TP_L2SPECTYPE_NONE,
+	L2TP_L2SPECTYPE_DEFAULT,
+};
+
+enum l2tp_encap_type {
+	L2TP_ENCAPTYPE_UDP,
+	L2TP_ENCAPTYPE_IP,
+};
+
+enum l2tp_seqmode {
+	L2TP_SEQ_NONE = 0,
+	L2TP_SEQ_IP = 1,
+	L2TP_SEQ_ALL = 2,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define L2TP_GENL_NAME		"l2tp"
+#define L2TP_GENL_VERSION	0x1
+
+#endif /* _UAPI_LINUX_L2TP_H_ */
diff --git a/include/linux/limits.h b/include/uapi/linux/limits.h
similarity index 100%
rename from include/linux/limits.h
rename to include/uapi/linux/limits.h
diff --git a/include/uapi/linux/llc.h b/include/uapi/linux/llc.h
new file mode 100644
index 0000000000000000000000000000000000000000..9c987a4024739fb4c4e98e8e2cd8a5cb943574aa
--- /dev/null
+++ b/include/uapi/linux/llc.h
@@ -0,0 +1,84 @@
+/*
+ * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
+ *
+ * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+#ifndef _UAPI__LINUX_LLC_H
+#define _UAPI__LINUX_LLC_H
+
+#include <linux/socket.h>
+
+#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
+struct sockaddr_llc {
+	__kernel_sa_family_t sllc_family; /* AF_LLC */
+	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
+	unsigned char   sllc_test;
+	unsigned char   sllc_xid;
+	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
+	unsigned char   sllc_sap;
+	unsigned char   sllc_mac[IFHWADDRLEN];
+	unsigned char   __pad[__LLC_SOCK_SIZE__ -
+			      sizeof(__kernel_sa_family_t) * 2 -
+			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
+};
+
+/* sockopt definitions. */
+enum llc_sockopts {
+	LLC_OPT_UNKNOWN = 0,
+	LLC_OPT_RETRY,		/* max retrans attempts. */
+	LLC_OPT_SIZE,		/* max PDU size (octets). */
+	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
+	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
+	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
+	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
+	LLC_OPT_TX_WIN,		/* tx window size. */
+	LLC_OPT_RX_WIN,		/* rx window size. */
+	LLC_OPT_PKTINFO,	/* ancillary packet information. */
+	LLC_OPT_MAX
+};
+
+#define LLC_OPT_MAX_RETRY	 100
+#define LLC_OPT_MAX_SIZE	4196
+#define LLC_OPT_MAX_WIN		 127
+#define LLC_OPT_MAX_ACK_TMR_EXP	  60
+#define LLC_OPT_MAX_P_TMR_EXP	  60
+#define LLC_OPT_MAX_REJ_TMR_EXP	  60
+#define LLC_OPT_MAX_BUSY_TMR_EXP  60
+
+/* LLC SAP types. */
+#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
+#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
+#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
+#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
+#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
+#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
+#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
+#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
+#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
+#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
+#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
+#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
+#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
+#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
+#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
+#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
+#define LLC_SAP_DISC	0xFC		/* Discovery			*/
+#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
+#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
+#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
+#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
+
+struct llc_pktinfo {
+	int lpi_ifindex;
+	unsigned char lpi_sap;
+	unsigned char lpi_mac[IFHWADDRLEN];
+};
+
+#endif /* _UAPI__LINUX_LLC_H */
diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h
new file mode 100644
index 0000000000000000000000000000000000000000..e0cecd2eabdc5f2289a1940bf3d00ad8ebc70ee8
--- /dev/null
+++ b/include/uapi/linux/loop.h
@@ -0,0 +1,94 @@
+/*
+ * include/linux/loop.h
+ *
+ * Written by Theodore Ts'o, 3/29/93.
+ *
+ * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
+ * permitted under the GNU General Public License.
+ */
+#ifndef _UAPI_LINUX_LOOP_H
+#define _UAPI_LINUX_LOOP_H
+
+
+#define LO_NAME_SIZE	64
+#define LO_KEY_SIZE	32
+
+
+/*
+ * Loop flags
+ */
+enum {
+	LO_FLAGS_READ_ONLY	= 1,
+	LO_FLAGS_AUTOCLEAR	= 4,
+	LO_FLAGS_PARTSCAN	= 8,
+};
+
+#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
+#include <linux/types.h>	/* for __u64 */
+
+/* Backwards compatibility version */
+struct loop_info {
+	int		   lo_number;		/* ioctl r/o */
+	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
+	unsigned long	   lo_inode; 		/* ioctl r/o */
+	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
+	int		   lo_offset;
+	int		   lo_encrypt_type;
+	int		   lo_encrypt_key_size; 	/* ioctl w/o */
+	int		   lo_flags;			/* ioctl r/o */
+	char		   lo_name[LO_NAME_SIZE];
+	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	unsigned long	   lo_init[2];
+	char		   reserved[4];
+};
+
+struct loop_info64 {
+	__u64		   lo_device;			/* ioctl r/o */
+	__u64		   lo_inode;			/* ioctl r/o */
+	__u64		   lo_rdevice;			/* ioctl r/o */
+	__u64		   lo_offset;
+	__u64		   lo_sizelimit;/* bytes, 0 == max available */
+	__u32		   lo_number;			/* ioctl r/o */
+	__u32		   lo_encrypt_type;
+	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
+	__u32		   lo_flags;			/* ioctl r/o */
+	__u8		   lo_file_name[LO_NAME_SIZE];
+	__u8		   lo_crypt_name[LO_NAME_SIZE];
+	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	__u64		   lo_init[2];
+};
+
+/*
+ * Loop filter types
+ */
+
+#define LO_CRYPT_NONE		0
+#define LO_CRYPT_XOR		1
+#define LO_CRYPT_DES		2
+#define LO_CRYPT_FISH2		3    /* Twofish encryption */
+#define LO_CRYPT_BLOW		4
+#define LO_CRYPT_CAST128	5
+#define LO_CRYPT_IDEA		6
+#define LO_CRYPT_DUMMY		9
+#define LO_CRYPT_SKIPJACK	10
+#define LO_CRYPT_CRYPTOAPI	18
+#define MAX_LO_CRYPT		20
+
+/*
+ * IOCTL commands --- we will commandeer 0x4C ('L')
+ */
+
+#define LOOP_SET_FD		0x4C00
+#define LOOP_CLR_FD		0x4C01
+#define LOOP_SET_STATUS		0x4C02
+#define LOOP_GET_STATUS		0x4C03
+#define LOOP_SET_STATUS64	0x4C04
+#define LOOP_GET_STATUS64	0x4C05
+#define LOOP_CHANGE_FD		0x4C06
+#define LOOP_SET_CAPACITY	0x4C07
+
+/* /dev/loop-control interface */
+#define LOOP_CTL_ADD		0x4C80
+#define LOOP_CTL_REMOVE		0x4C81
+#define LOOP_CTL_GET_FREE	0x4C82
+#endif /* _UAPI_LINUX_LOOP_H */
diff --git a/include/uapi/linux/lp.h b/include/uapi/linux/lp.h
new file mode 100644
index 0000000000000000000000000000000000000000..a3406a51f1968c70f0a0b281561397159be812aa
--- /dev/null
+++ b/include/uapi/linux/lp.h
@@ -0,0 +1,100 @@
+/*
+ * usr/include/linux/lp.h c.1991-1992 James Wiegand
+ * many modifications copyright (C) 1992 Michael K. Johnson
+ * Interrupt support added 1993 Nigel Gamble
+ * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
+ */
+#ifndef _UAPI_LINUX_LP_H
+#define _UAPI_LINUX_LP_H
+
+
+/*
+ * Per POSIX guidelines, this module reserves the LP and lp prefixes
+ * These are the lp_table[minor].flags flags...
+ */
+#define LP_EXIST 0x0001
+#define LP_SELEC 0x0002
+#define LP_BUSY	 0x0004
+#define LP_BUSY_BIT_POS 2
+#define LP_OFFL	 0x0008
+#define LP_NOPA  0x0010
+#define LP_ERR   0x0020
+#define LP_ABORT 0x0040
+#define LP_CAREFUL 0x0080 /* obsoleted -arca */
+#define LP_ABORTOPEN 0x0100
+
+#define LP_TRUST_IRQ_  0x0200 /* obsolete */
+#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
+#define LP_DATA_AVAIL  0x0800 /* Data is available. */
+
+/* 
+ * bit defines for 8255 status port
+ * base + 1
+ * accessed with LP_S(minor), which gets the byte...
+ */
+#define LP_PBUSY	0x80  /* inverted input, active high */
+#define LP_PACK		0x40  /* unchanged input, active low */
+#define LP_POUTPA	0x20  /* unchanged input, active high */
+#define LP_PSELECD	0x10  /* unchanged input, active high */
+#define LP_PERRORP	0x08  /* unchanged input, active low */
+
+/* timeout for each character.  This is relative to bus cycles -- it
+ * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
+ * have extremely slow printing, or if the machine seems to slow down
+ * a lot when you print.  If you have slow printing, increase this
+ * number and recompile, and if your system gets bogged down, decrease
+ * this number.  This can be changed with the tunelp(8) command as well.
+ */
+
+#define LP_INIT_CHAR 1000
+
+/* The parallel port specs apparently say that there needs to be
+ * a .5usec wait before and after the strobe.
+ */
+
+#define LP_INIT_WAIT 1
+
+/* This is the amount of time that the driver waits for the printer to
+ * catch up when the printer's buffer appears to be filled.  If you
+ * want to tune this and have a fast printer (i.e. HPIIIP), decrease
+ * this number, and if you have a slow printer, increase this number.
+ * This is in hundredths of a second, the default 2 being .05 second.
+ * Or use the tunelp(8) command, which is especially nice if you want
+ * change back and forth between character and graphics printing, which
+ * are wildly different...
+ */
+
+#define LP_INIT_TIME 2
+
+/* IOCTL numbers */
+#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
+#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
+#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
+			    FALSE to retry.  Default is retry.  */
+#define LPSETIRQ 0x0605  /* call with new IRQ number,
+			    or 0 for polling (no IRQ) */
+#define LPGETIRQ 0x0606  /* get the current IRQ number */
+#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
+/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
+#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
+			    line, and error indicators good on all writes,
+			    FALSE to ignore them.  Default is ignore. */
+#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
+			    FALSE to ignore error.  Default is ignore.  */
+#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
+#define LPRESET     0x060c  /* reset printer */
+#ifdef LP_STATS
+#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
+#endif
+#define LPGETFLAGS  0x060e  /* get status flags */
+#define LPSETTIMEOUT 0x060f /* set parport timeout */
+
+/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
+   This is also used for re-checking error conditions if LP_ABORT is
+   not set.  This is the default behavior. */
+
+#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
+#define LP_TIMEOUT_POLLED	(10 * HZ)
+
+
+#endif /* _UAPI_LINUX_LP_H */
diff --git a/include/linux/magic.h b/include/uapi/linux/magic.h
similarity index 100%
rename from include/linux/magic.h
rename to include/uapi/linux/magic.h
diff --git a/include/linux/major.h b/include/uapi/linux/major.h
similarity index 100%
rename from include/linux/major.h
rename to include/uapi/linux/major.h
diff --git a/include/linux/map_to_7segment.h b/include/uapi/linux/map_to_7segment.h
similarity index 100%
rename from include/linux/map_to_7segment.h
rename to include/uapi/linux/map_to_7segment.h
diff --git a/include/linux/matroxfb.h b/include/uapi/linux/matroxfb.h
similarity index 100%
rename from include/linux/matroxfb.h
rename to include/uapi/linux/matroxfb.h
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
new file mode 100644
index 0000000000000000000000000000000000000000..c94a510a577ed1cbfb43e470e98211e88b6bd8f1
--- /dev/null
+++ b/include/uapi/linux/mdio.h
@@ -0,0 +1,297 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef _UAPI__LINUX_MDIO_H__
+#define _UAPI__LINUX_MDIO_H__
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
+					 * Physical Medium Dependent */
+#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
+#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
+#define MDIO_MMD_TC		6	/* Transmission Convergence */
+#define MDIO_MMD_AN		7	/* Auto-Negotiation */
+#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
+#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
+#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1		MII_BMCR
+#define MDIO_STAT1		MII_BMSR
+#define MDIO_DEVID1		MII_PHYSID1
+#define MDIO_DEVID2		MII_PHYSID2
+#define MDIO_SPEED		4	/* Speed ability */
+#define MDIO_DEVS1		5	/* Devices in package */
+#define MDIO_DEVS2		6
+#define MDIO_CTRL2		7	/* 10G control 2 */
+#define MDIO_STAT2		8	/* 10G status 2 */
+#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1		14	/* Package identifier */
+#define MDIO_PKGID2		15
+#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
+#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
+#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
+#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
+#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
+					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
+#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
+#define MDIO_CTRL1_RESET		BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
+#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
+#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
+#define MDIO_STAT1_FAULT		0x0080	/* Fault */
+#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
+#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G			0x0001	/* 10G capable */
+#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
+#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
+#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
+#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
+#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
+#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
+#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
+#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
+#define MDIO_PMA_10GBT_SNR_MAX		127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
+#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
+
+/* EEE Supported/Advertisement/LP Advertisement registers.
+ *
+ * EEE capability Register (3.20), Advertisement (7.60) and
+ * Link partner ability (7.61) registers have and can use the same identical
+ * bit masks.
+ */
+#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
+/* Note: the two defines above can be potentially used by the user-land
+ * and cannot remove them now.
+ * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
+ * using the previous ones (that can be considered obsolete).
+ */
+#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
+#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
+#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
+#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
+#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
+#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45			0x8000
+#define MDIO_PHY_ID_PRTAD		0x03e0
+#define MDIO_PHY_ID_DEVAD		0x001f
+#define MDIO_PHY_ID_C45_MASK						\
+	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+#endif /* _UAPI__LINUX_MDIO_H__ */
diff --git a/include/linux/media.h b/include/uapi/linux/media.h
similarity index 100%
rename from include/linux/media.h
rename to include/uapi/linux/media.h
diff --git a/include/linux/mei.h b/include/uapi/linux/mei.h
similarity index 100%
rename from include/linux/mei.h
rename to include/uapi/linux/mei.h
diff --git a/include/uapi/linux/mempolicy.h b/include/uapi/linux/mempolicy.h
new file mode 100644
index 0000000000000000000000000000000000000000..23e62e0537e2d1080f0c78ce2ffb946a23264676
--- /dev/null
+++ b/include/uapi/linux/mempolicy.h
@@ -0,0 +1,64 @@
+/*
+ * NUMA memory policies for Linux.
+ * Copyright 2003,2004 Andi Kleen SuSE Labs
+ */
+#ifndef _UAPI_LINUX_MEMPOLICY_H
+#define _UAPI_LINUX_MEMPOLICY_H
+
+#include <linux/errno.h>
+
+
+/*
+ * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
+ * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
+ * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
+ */
+
+/* Policies */
+enum {
+	MPOL_DEFAULT,
+	MPOL_PREFERRED,
+	MPOL_BIND,
+	MPOL_INTERLEAVE,
+	MPOL_MAX,	/* always last member of enum */
+};
+
+enum mpol_rebind_step {
+	MPOL_REBIND_ONCE,	/* do rebind work at once(not by two step) */
+	MPOL_REBIND_STEP1,	/* first step(set all the newly nodes) */
+	MPOL_REBIND_STEP2,	/* second step(clean all the disallowed nodes)*/
+	MPOL_REBIND_NSTEP,
+};
+
+/* Flags for set_mempolicy */
+#define MPOL_F_STATIC_NODES	(1 << 15)
+#define MPOL_F_RELATIVE_NODES	(1 << 14)
+
+/*
+ * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
+ * either set_mempolicy() or mbind().
+ */
+#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
+
+/* Flags for get_mempolicy */
+#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
+#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
+#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
+
+/* Flags for mbind */
+#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
+#define MPOL_MF_MOVE	(1<<1)	/* Move pages owned by this process to conform to mapping */
+#define MPOL_MF_MOVE_ALL (1<<2)	/* Move every page to conform to mapping */
+#define MPOL_MF_INTERNAL (1<<3)	/* Internal flags start here */
+
+/*
+ * Internal flags that share the struct mempolicy flags word with
+ * "mode flags".  These flags are allocated from bit 0 up, as they
+ * are never OR'ed into the mode in mempolicy API arguments.
+ */
+#define MPOL_F_SHARED  (1 << 0)	/* identify shared policies */
+#define MPOL_F_LOCAL   (1 << 1)	/* preferred local allocation */
+#define MPOL_F_REBINDING (1 << 2)	/* identify policies in rebinding */
+
+
+#endif /* _UAPI_LINUX_MEMPOLICY_H */
diff --git a/include/linux/meye.h b/include/uapi/linux/meye.h
similarity index 100%
rename from include/linux/meye.h
rename to include/uapi/linux/meye.h
diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h
new file mode 100644
index 0000000000000000000000000000000000000000..237fac4bc17b7ca764561b7cc81d02b0d4bafab1
--- /dev/null
+++ b/include/uapi/linux/mii.h
@@ -0,0 +1,161 @@
+/*
+ * linux/mii.h: definitions for MII-compatible transceivers
+ * Originally drivers/net/sunhme.h.
+ *
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _UAPI__LINUX_MII_H__
+#define _UAPI__LINUX_MII_H__
+
+#include <linux/types.h>
+#include <linux/ethtool.h>
+
+/* Generic MII registers. */
+#define MII_BMCR		0x00	/* Basic mode control register */
+#define MII_BMSR		0x01	/* Basic mode status register  */
+#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
+#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
+#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
+#define MII_LPA			0x05	/* Link partner ability reg    */
+#define MII_EXPANSION		0x06	/* Expansion register          */
+#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
+#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
+#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
+#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
+#define MII_ESTATUS		0x0f	/* Extended Status             */
+#define MII_DCOUNTER		0x12	/* Disconnect counter          */
+#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
+#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
+#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
+#define MII_SREVISION		0x16	/* Silicon revision            */
+#define MII_RESV1		0x17	/* Reserved...                 */
+#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
+#define MII_PHYADDR		0x19	/* PHY address                 */
+#define MII_RESV2		0x1a	/* Reserved...                 */
+#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
+#define MII_NCONFIG		0x1c	/* Network interface config    */
+
+/* Basic mode control register. */
+#define BMCR_RESV		0x003f	/* Unused...                   */
+#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
+#define BMCR_CTST		0x0080	/* Collision test              */
+#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
+#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
+#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
+#define BMCR_PDOWN		0x0800	/* Enable low power state      */
+#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
+#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
+#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
+#define BMCR_RESET		0x8000	/* Reset to default state      */
+
+/* Basic mode status register. */
+#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
+#define BMSR_JCD		0x0002	/* Jabber detected             */
+#define BMSR_LSTATUS		0x0004	/* Link status                 */
+#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
+#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
+#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
+#define BMSR_RESV		0x00c0	/* Unused...                   */
+#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
+#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
+#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
+#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
+#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
+#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
+#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
+
+/* Advertisement control register. */
+#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
+#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
+#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
+#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
+#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
+#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
+#define ADVERTISE_RESV		0x1000	/* Unused...                   */
+#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
+#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
+#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
+
+#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
+				  ADVERTISE_CSMA)
+#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
+				  ADVERTISE_100HALF | ADVERTISE_100FULL)
+
+/* Link partner ability register. */
+#define LPA_SLCT		0x001f	/* Same as advertise selector  */
+#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
+#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
+#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
+#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
+#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
+#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
+#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
+#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
+#define LPA_RESV		0x1000	/* Unused...                   */
+#define LPA_RFAULT		0x2000	/* Link partner faulted        */
+#define LPA_LPACK		0x4000	/* Link partner acked us       */
+#define LPA_NPAGE		0x8000	/* Next page bit               */
+
+#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
+#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+
+/* Expansion register for auto-negotiation. */
+#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
+#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
+#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
+#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
+#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
+#define EXPANSION_RESV		0xffe0	/* Unused...                   */
+
+#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
+#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
+
+/* N-way test register. */
+#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
+#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
+#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
+#define CTL1000_AS_MASTER	0x0800
+#define CTL1000_ENABLE_MASTER	0x1000
+
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
+#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
+#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
+
+/* Flow control flags */
+#define FLOW_CTRL_TX		0x01
+#define FLOW_CTRL_RX		0x02
+
+/* MMD Access Control register fields */
+#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
+#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
+#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
+#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
+#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
+
+/* This structure is used in all SIOCxMIIxxx ioctl calls */
+struct mii_ioctl_data {
+	__u16		phy_id;
+	__u16		reg_num;
+	__u16		val_in;
+	__u16		val_out;
+};
+
+#endif /* _UAPI__LINUX_MII_H__ */
diff --git a/include/linux/minix_fs.h b/include/uapi/linux/minix_fs.h
similarity index 100%
rename from include/linux/minix_fs.h
rename to include/uapi/linux/minix_fs.h
diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h
new file mode 100644
index 0000000000000000000000000000000000000000..ade4acd3a90cd498d4409abe263681d590a7de96
--- /dev/null
+++ b/include/uapi/linux/mman.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_MMAN_H
+#define _UAPI_LINUX_MMAN_H
+
+#include <asm/mman.h>
+
+#define MREMAP_MAYMOVE	1
+#define MREMAP_FIXED	2
+
+#define OVERCOMMIT_GUESS		0
+#define OVERCOMMIT_ALWAYS		1
+#define OVERCOMMIT_NEVER		2
+
+#endif /* _UAPI_LINUX_MMAN_H */
diff --git a/include/linux/mmtimer.h b/include/uapi/linux/mmtimer.h
similarity index 100%
rename from include/linux/mmtimer.h
rename to include/uapi/linux/mmtimer.h
diff --git a/include/linux/mqueue.h b/include/uapi/linux/mqueue.h
similarity index 100%
rename from include/linux/mqueue.h
rename to include/uapi/linux/mqueue.h
diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h
new file mode 100644
index 0000000000000000000000000000000000000000..16929993acc4976535c73bf8172e29789275bfeb
--- /dev/null
+++ b/include/uapi/linux/mroute.h
@@ -0,0 +1,143 @@
+#ifndef _UAPI__LINUX_MROUTE_H
+#define _UAPI__LINUX_MROUTE_H
+
+#include <linux/sockios.h>
+#include <linux/types.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the mrouted code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT_BASE	200
+#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
+#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
+#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
+#define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
+
+#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXVIFS		32	
+typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short vifi_t;
+#define ALL_VIFS	((vifi_t)(-1))
+
+/*
+ *	Same idea as select
+ */
+ 
+#define VIFM_SET(n,m)	((m)|=(1<<(n)))
+#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
+#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
+#define VIFM_CLRALL(m)	((m)=0)
+#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
+#define VIFM_SAME(m1,m2)	((m1)==(m2))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_VIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+ 
+struct vifctl {
+	vifi_t	vifc_vifi;		/* Index of VIF */
+	unsigned char vifc_flags;	/* VIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+	union {
+		struct in_addr vifc_lcl_addr;     /* Local interface address */
+		int            vifc_lcl_ifindex;  /* Local interface index   */
+	};
+	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
+};
+
+#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
+#define VIFF_SRCRT		0x2	/* NI */
+#define VIFF_REGISTER		0x4	/* register vif	*/
+#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
+					   vifc_lcl_addr to find an interface */
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+ 
+struct mfcctl {
+	struct in_addr mfcc_origin;		/* Origin of mcast	*/
+	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
+	vifi_t	mfcc_parent;			/* Where it arrived	*/
+	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
+	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
+	unsigned int mfcc_byte_cnt;
+	unsigned int mfcc_wrong_if;
+	int	     mfcc_expire;
+};
+
+/* 
+ *	Group count retrieval for mrouted
+ */
+ 
+struct sioc_sg_req {
+	struct in_addr src;
+	struct in_addr grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_vif_req {
+	vifi_t	vifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	This is the format the mroute daemon expects to see IGMP control
+ *	data. Magically happens to be like an IP packet as per the original
+ */
+ 
+struct igmpmsg {
+	__u32 unused1,unused2;
+	unsigned char im_msgtype;		/* What is this */
+	unsigned char im_mbz;			/* Must be zero */
+	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
+	unsigned char unused3;
+	struct in_addr im_src,im_dst;
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+
+
+#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
+
+/*
+ *	Pseudo messages used by mrouted
+ */
+
+#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
+#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
+#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
+
+
+#endif /* _UAPI__LINUX_MROUTE_H */
diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h
new file mode 100644
index 0000000000000000000000000000000000000000..3e89b5e7f9e33052adeb6b5dafa01944f02ee5cc
--- /dev/null
+++ b/include/uapi/linux/mroute6.h
@@ -0,0 +1,137 @@
+#ifndef _UAPI__LINUX_MROUTE6_H
+#define _UAPI__LINUX_MROUTE6_H
+
+#include <linux/types.h>
+#include <linux/sockios.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the pim6sd code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT6_BASE	200
+#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
+#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
+#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
+#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
+
+#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXMIFS		32
+typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short mifi_t;
+#define ALL_MIFS	((mifi_t)(-1))
+
+#ifndef IF_SETSIZE
+#define IF_SETSIZE	256
+#endif
+
+typedef	__u32		if_mask;
+#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
+
+#if !defined(__KERNEL__)
+#if !defined(DIV_ROUND_UP)
+#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
+#endif
+#endif
+
+typedef struct if_set {
+	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
+} if_set;
+
+#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
+#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
+#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
+#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
+#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_MIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+
+struct mif6ctl {
+	mifi_t	mif6c_mifi;		/* Index of MIF */
+	unsigned char mif6c_flags;	/* MIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	__u16	 mif6c_pifi;		/* the index of the physical IF */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+};
+
+#define MIFF_REGISTER	0x1	/* register vif	*/
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+
+struct mf6cctl {
+	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
+	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
+	mifi_t	mf6cc_parent;			/* Where it arrived	*/
+	struct if_set mf6cc_ifset;		/* Where it is going */
+};
+
+/*
+ *	Group count retrieval for pim6sd
+ */
+
+struct sioc_sg_req6 {
+	struct sockaddr_in6 src;
+	struct sockaddr_in6 grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_mif_req6 {
+	mifi_t	mifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+
+
+/*
+ * Structure used to communicate from kernel to multicast router.
+ * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
+ * used for IPv4 implementation). This is because this structure will be passed via an
+ * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
+ * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
+ */
+
+struct mrt6msg {
+#define MRT6MSG_NOCACHE		1
+#define MRT6MSG_WRONGMIF	2
+#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
+	__u8		im6_mbz;		/* must be zero		   */
+	__u8		im6_msgtype;		/* what type of message    */
+	__u16		im6_mif;		/* mif rec'd on		   */
+	__u32		im6_pad;		/* padding for 64 bit arch */
+	struct in6_addr	im6_src, im6_dst;
+};
+
+#endif /* _UAPI__LINUX_MROUTE6_H */
diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h
new file mode 100644
index 0000000000000000000000000000000000000000..996719f82e28e2b1cb3aaeb961c4cb2b5a5fc82d
--- /dev/null
+++ b/include/uapi/linux/msdos_fs.h
@@ -0,0 +1,167 @@
+#ifndef _UAPI_LINUX_MSDOS_FS_H
+#define _UAPI_LINUX_MSDOS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+#include <asm/byteorder.h>
+
+/*
+ * The MS-DOS filesystem constants/structures
+ */
+
+#define SECTOR_SIZE	512		/* sector size (bytes) */
+#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
+#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
+#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
+#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
+#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
+#define MSDOS_LONGNAME	256		/* maximum name length */
+#define CF_LE_W(v)	le16_to_cpu(v)
+#define CF_LE_L(v)	le32_to_cpu(v)
+#define CT_LE_W(v)	cpu_to_le16(v)
+#define CT_LE_L(v)	cpu_to_le32(v)
+
+#define MSDOS_ROOT_INO	 1	/* The root inode number */
+#define MSDOS_FSINFO_INO 2	/* Used for managing the FSINFO block */
+
+#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
+
+/* directory limit */
+#define FAT_MAX_DIR_ENTRIES	(65536)
+#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
+
+#define ATTR_NONE	0	/* no attribute bits */
+#define ATTR_RO		1	/* read-only */
+#define ATTR_HIDDEN	2	/* hidden */
+#define ATTR_SYS	4	/* system */
+#define ATTR_VOLUME	8	/* volume label */
+#define ATTR_DIR	16	/* directory */
+#define ATTR_ARCH	32	/* archived */
+
+/* attribute bits that are copied "as is" */
+#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
+/* bits that are used by the Windows 95/Windows NT extended FAT */
+#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
+
+#define CASE_LOWER_BASE	8	/* base is lower case */
+#define CASE_LOWER_EXT	16	/* extension is lower case */
+
+#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
+#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
+
+#define FAT_LFN_LEN	255	/* maximum long name length */
+#define MSDOS_NAME	11	/* maximum name length */
+#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
+#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
+#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
+
+#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
+	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
+
+/* start of data cluster's entry (number of reserved clusters) */
+#define FAT_START_ENT	2
+
+/* maximum number of clusters */
+#define MAX_FAT12	0xFF4
+#define MAX_FAT16	0xFFF4
+#define MAX_FAT32	0x0FFFFFF6
+#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
+	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
+
+/* bad cluster mark */
+#define BAD_FAT12	0xFF7
+#define BAD_FAT16	0xFFF7
+#define BAD_FAT32	0x0FFFFFF7
+
+/* standard EOF */
+#define EOF_FAT12	0xFFF
+#define EOF_FAT16	0xFFFF
+#define EOF_FAT32	0x0FFFFFFF
+
+#define FAT_ENT_FREE	(0)
+#define FAT_ENT_BAD	(BAD_FAT32)
+#define FAT_ENT_EOF	(EOF_FAT32)
+
+#define FAT_FSINFO_SIG1	0x41615252
+#define FAT_FSINFO_SIG2	0x61417272
+#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
+			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
+
+struct __fat_dirent {
+	long		d_ino;
+	__kernel_off_t	d_off;
+	unsigned short	d_reclen;
+	char		d_name[256]; /* We must not include limits.h! */
+};
+
+/*
+ * ioctl commands
+ */
+#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
+#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
+/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
+#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
+#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
+
+struct fat_boot_sector {
+	__u8	ignored[3];	/* Boot strap short or near jump */
+	__u8	system_id[8];	/* Name - can be used to special case
+				   partition manager volumes */
+	__u8	sector_size[2];	/* bytes per logical sector */
+	__u8	sec_per_clus;	/* sectors/cluster */
+	__le16	reserved;	/* reserved sectors */
+	__u8	fats;		/* number of FATs */
+	__u8	dir_entries[2];	/* root directory entries */
+	__u8	sectors[2];	/* number of sectors */
+	__u8	media;		/* media code */
+	__le16	fat_length;	/* sectors/FAT */
+	__le16	secs_track;	/* sectors per track */
+	__le16	heads;		/* number of heads */
+	__le32	hidden;		/* hidden sectors (unused) */
+	__le32	total_sect;	/* number of sectors (if sectors == 0) */
+
+	/* The following fields are only used by FAT32 */
+	__le32	fat32_length;	/* sectors/FAT */
+	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
+	__u8	version[2];	/* major, minor filesystem version */
+	__le32	root_cluster;	/* first cluster in root directory */
+	__le16	info_sector;	/* filesystem info sector */
+	__le16	backup_boot;	/* backup boot sector */
+	__le16	reserved2[6];	/* Unused */
+};
+
+struct fat_boot_fsinfo {
+	__le32   signature1;	/* 0x41615252L */
+	__le32   reserved1[120];	/* Nothing as far as I can tell */
+	__le32   signature2;	/* 0x61417272L */
+	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
+	__le32   next_cluster;	/* Most recently allocated cluster */
+	__le32   reserved2[4];
+};
+
+struct msdos_dir_entry {
+	__u8	name[MSDOS_NAME];/* name and extension */
+	__u8	attr;		/* attribute bits */
+	__u8    lcase;		/* Case for base and extension */
+	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
+	__le16	ctime;		/* Creation time */
+	__le16	cdate;		/* Creation date */
+	__le16	adate;		/* Last access date */
+	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
+	__le16	time,date,start;/* time, date and first cluster */
+	__le32	size;		/* file size (in bytes) */
+};
+
+/* Up to 13 characters of the name */
+struct msdos_dir_slot {
+	__u8    id;		/* sequence number for slot */
+	__u8    name0_4[10];	/* first 5 characters in name */
+	__u8    attr;		/* attribute byte */
+	__u8    reserved;	/* always 0 */
+	__u8    alias_checksum;	/* checksum for 8.3 alias */
+	__u8    name5_10[12];	/* 6 more characters in name */
+	__le16   start;		/* starting cluster number, 0 in long slots */
+	__u8    name11_12[4];	/* last 2 characters in name */
+};
+
+#endif /* _UAPI_LINUX_MSDOS_FS_H */
diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h
new file mode 100644
index 0000000000000000000000000000000000000000..78dbd2f996a3668665718e5dcad7918966640281
--- /dev/null
+++ b/include/uapi/linux/msg.h
@@ -0,0 +1,75 @@
+#ifndef _UAPI_LINUX_MSG_H
+#define _UAPI_LINUX_MSG_H
+
+#include <linux/ipc.h>
+
+/* ipcs ctl commands */
+#define MSG_STAT 11
+#define MSG_INFO 12
+
+/* msgrcv options */
+#define MSG_NOERROR     010000  /* no error if message is too big */
+#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct msqid_ds {
+	struct ipc_perm msg_perm;
+	struct msg *msg_first;		/* first message on queue,unused  */
+	struct msg *msg_last;		/* last message in queue,unused */
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
+	unsigned long  msg_lqbytes;	/* ditto */
+	unsigned short msg_cbytes;	/* current number of bytes on queue */
+	unsigned short msg_qnum;	/* number of messages in queue */
+	unsigned short msg_qbytes;	/* max number of bytes on queue */
+	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
+};
+
+/* Include the definition of msqid64_ds */
+#include <asm/msgbuf.h>
+
+/* message buffer for msgsnd and msgrcv calls */
+struct msgbuf {
+	long mtype;         /* type of message */
+	char mtext[1];      /* message text */
+};
+
+/* buffer for msgctl calls IPC_INFO, MSG_INFO */
+struct msginfo {
+	int msgpool;
+	int msgmap; 
+	int msgmax; 
+	int msgmnb; 
+	int msgmni; 
+	int msgssz; 
+	int msgtql; 
+	unsigned short  msgseg; 
+};
+
+/*
+ * Scaling factor to compute msgmni:
+ * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
+ * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
+ * up to 8MB       : msgmni = 16 (MSGMNI)
+ * 4 GB            : msgmni = 8K
+ * more than 16 GB : msgmni = 32K (IPCMNI)
+ */
+#define MSG_MEM_SCALE 32
+
+#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
+#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
+#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
+
+/* unused */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
+#define MSGTQL  MSGMNB            /* number of system message headers */
+#define MSGMAP  MSGMNB            /* number of entries in message map */
+#define MSGSSZ  16                /* message segment size */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
+#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
+
+
+#endif /* _UAPI_LINUX_MSG_H */
diff --git a/include/linux/mtio.h b/include/uapi/linux/mtio.h
similarity index 100%
rename from include/linux/mtio.h
rename to include/uapi/linux/mtio.h
diff --git a/include/uapi/linux/n_r3964.h b/include/uapi/linux/n_r3964.h
new file mode 100644
index 0000000000000000000000000000000000000000..81337cbf40b7fbed2e56544e99d28c76fe16f1e5
--- /dev/null
+++ b/include/uapi/linux/n_r3964.h
@@ -0,0 +1,98 @@
+/* r3964 linediscipline for linux
+ *
+ * -----------------------------------------------------------
+ * Copyright by
+ * Philips Automation Projects
+ * Kassel (Germany)
+ * -----------------------------------------------------------
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License, incorporated herein by reference.
+ *
+ * Author:
+ * L. Haag
+ *
+ * $Log: r3964.h,v $
+ * Revision 1.4  2005/12/21 19:54:24  Kurt Huwig <kurt huwig de>
+ * Fixed HZ usage on 2.6 kernels
+ * Removed unnecessary include
+ *
+ * Revision 1.3  2001/03/18 13:02:24  dwmw2
+ * Fix timer usage, use spinlocks properly.
+ *
+ * Revision 1.2  2001/03/18 12:53:15  dwmw2
+ * Merge changes in 2.4.2
+ *
+ * Revision 1.1.1.1  1998/10/13 16:43:14  dwmw2
+ * This'll screw the version control
+ *
+ * Revision 1.6  1998/09/30 00:40:38  dwmw2
+ * Updated to use kernel's N_R3964 if available
+ *
+ * Revision 1.4  1998/04/02 20:29:44  lhaag
+ * select, blocking, ...
+ *
+ * Revision 1.3  1998/02/12 18:58:43  root
+ * fixed some memory leaks
+ * calculation of checksum characters
+ *
+ * Revision 1.2  1998/02/07 13:03:17  root
+ * ioctl read_telegram
+ *
+ * Revision 1.1  1998/02/06 19:19:43  root
+ * Initial revision
+ *
+ *
+ */
+
+#ifndef _UAPI__LINUX_N_R3964_H__
+#define _UAPI__LINUX_N_R3964_H__
+
+/* line disciplines for r3964 protocol */
+
+
+/*
+ * Ioctl-commands
+ */
+
+#define R3964_ENABLE_SIGNALS      0x5301
+#define R3964_SETPRIORITY         0x5302
+#define R3964_USE_BCC             0x5303
+#define R3964_READ_TELEGRAM       0x5304
+
+/* Options for R3964_SETPRIORITY */
+#define R3964_MASTER   0
+#define R3964_SLAVE    1
+
+/* Options for R3964_ENABLE_SIGNALS */
+#define R3964_SIG_ACK   0x0001
+#define R3964_SIG_DATA  0x0002
+#define R3964_SIG_ALL   0x000f
+#define R3964_SIG_NONE  0x0000
+#define R3964_USE_SIGIO 0x1000
+
+/*
+ * r3964 operation states:
+ */
+
+/* types for msg_id: */
+enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
+
+#define R3964_MAX_MSG_COUNT 32
+
+/* error codes for client messages */
+#define R3964_OK 0        /* no error. */
+#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
+#define R3964_OVERFLOW -2 /* msg queue overflow */
+
+/* the client gets this struct when calling read(fd,...): */
+struct r3964_client_message {
+	  int     msg_id;
+	  int     arg;
+	  int     error_code;
+};
+
+#define R3964_MTU      256
+
+
+
+#endif /* _UAPI__LINUX_N_R3964_H__ */
diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h
new file mode 100644
index 0000000000000000000000000000000000000000..dfb514472cbc49d64712112c1cd3d042c56cfb0f
--- /dev/null
+++ b/include/uapi/linux/nbd.h
@@ -0,0 +1,77 @@
+/*
+ * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL.
+ * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne)
+ *            Made nbd_end_request() use the io_request_lock
+ * 2001 Copyright (C) Steven Whitehouse
+ *            New nbd_end_request() for compatibility with new linux block
+ *            layer code.
+ * 2003/06/24 Louis D. Langholtz <ldl@aros.net>
+ *            Removed unneeded blksize_bits field from nbd_device struct.
+ *            Cleanup PARANOIA usage & code.
+ * 2004/02/19 Paul Clements
+ *            Removed PARANOIA, plus various cleanup and comments
+ */
+
+#ifndef _UAPILINUX_NBD_H
+#define _UAPILINUX_NBD_H
+
+#include <linux/types.h>
+
+#define NBD_SET_SOCK	_IO( 0xab, 0 )
+#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
+#define NBD_SET_SIZE	_IO( 0xab, 2 )
+#define NBD_DO_IT	_IO( 0xab, 3 )
+#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
+#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
+#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
+#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
+#define NBD_DISCONNECT  _IO( 0xab, 8 )
+#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
+#define NBD_SET_FLAGS   _IO( 0xab, 10)
+
+enum {
+	NBD_CMD_READ = 0,
+	NBD_CMD_WRITE = 1,
+	NBD_CMD_DISC = 2,
+	/* there is a gap here to match userspace */
+	NBD_CMD_TRIM = 4
+};
+
+/* values for flags field */
+#define NBD_FLAG_HAS_FLAGS    (1 << 0) /* nbd-server supports flags */
+#define NBD_FLAG_READ_ONLY    (1 << 1) /* device is read-only */
+/* there is a gap here to match userspace */
+#define NBD_FLAG_SEND_TRIM    (1 << 5) /* send trim/discard */
+
+#define nbd_cmd(req) ((req)->cmd[0])
+
+/* userspace doesn't need the nbd_device structure */
+
+/* These are sent over the network in the request/reply magic fields */
+
+#define NBD_REQUEST_MAGIC 0x25609513
+#define NBD_REPLY_MAGIC 0x67446698
+/* Do *not* use magics: 0x12560953 0x96744668. */
+
+/*
+ * This is the packet used for communication between client and
+ * server. All data are in network byte order.
+ */
+struct nbd_request {
+	__be32 magic;
+	__be32 type;	/* == READ || == WRITE 	*/
+	char handle[8];
+	__be64 from;
+	__be32 len;
+} __attribute__((packed));
+
+/*
+ * This is the reply packet that nbd-server sends back to the client after
+ * it has completed an I/O request (or an error occurs).
+ */
+struct nbd_reply {
+	__be32 magic;
+	__be32 error;		/* 0 = ok, else error	*/
+	char handle[8];		/* handle you got from request	*/
+};
+#endif /* _UAPILINUX_NBD_H */
diff --git a/include/linux/ncp.h b/include/uapi/linux/ncp.h
similarity index 100%
rename from include/linux/ncp.h
rename to include/uapi/linux/ncp.h
diff --git a/include/linux/ncp_fs.h b/include/uapi/linux/ncp_fs.h
similarity index 100%
rename from include/linux/ncp_fs.h
rename to include/uapi/linux/ncp_fs.h
diff --git a/include/linux/ncp_mount.h b/include/uapi/linux/ncp_mount.h
similarity index 100%
rename from include/linux/ncp_mount.h
rename to include/uapi/linux/ncp_mount.h
diff --git a/include/linux/ncp_no.h b/include/uapi/linux/ncp_no.h
similarity index 100%
rename from include/linux/ncp_no.h
rename to include/uapi/linux/ncp_no.h
diff --git a/include/linux/neighbour.h b/include/uapi/linux/neighbour.h
similarity index 100%
rename from include/linux/neighbour.h
rename to include/uapi/linux/neighbour.h
diff --git a/include/uapi/linux/net.h b/include/uapi/linux/net.h
new file mode 100644
index 0000000000000000000000000000000000000000..9457239ed219901a8a3d42264cb28210657bbd6f
--- /dev/null
+++ b/include/uapi/linux/net.h
@@ -0,0 +1,57 @@
+/*
+ * NET		An implementation of the SOCKET network access protocol.
+ *		This is the master header file for the Linux NET layer,
+ *		or, in plain English: the networking handling part of the
+ *		kernel.
+ *
+ * Version:	@(#)net.h	1.0.3	05/25/93
+ *
+ * Authors:	Orest Zborowski, <obz@Kodak.COM>
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_NET_H
+#define _UAPI_LINUX_NET_H
+
+#include <linux/socket.h>
+#include <asm/socket.h>
+
+#define NPROTO		AF_MAX
+
+#define SYS_SOCKET	1		/* sys_socket(2)		*/
+#define SYS_BIND	2		/* sys_bind(2)			*/
+#define SYS_CONNECT	3		/* sys_connect(2)		*/
+#define SYS_LISTEN	4		/* sys_listen(2)		*/
+#define SYS_ACCEPT	5		/* sys_accept(2)		*/
+#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
+#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
+#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
+#define SYS_SEND	9		/* sys_send(2)			*/
+#define SYS_RECV	10		/* sys_recv(2)			*/
+#define SYS_SENDTO	11		/* sys_sendto(2)		*/
+#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
+#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
+#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
+#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
+#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
+#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
+#define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
+#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
+#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
+
+typedef enum {
+	SS_FREE = 0,			/* not allocated		*/
+	SS_UNCONNECTED,			/* unconnected to any socket	*/
+	SS_CONNECTING,			/* in process of connecting	*/
+	SS_CONNECTED,			/* connected to socket		*/
+	SS_DISCONNECTING		/* in process of disconnecting	*/
+} socket_state;
+
+#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
+
+#endif /* _UAPI_LINUX_NET_H */
diff --git a/include/linux/net_dropmon.h b/include/uapi/linux/net_dropmon.h
similarity index 100%
rename from include/linux/net_dropmon.h
rename to include/uapi/linux/net_dropmon.h
diff --git a/include/linux/net_tstamp.h b/include/uapi/linux/net_tstamp.h
similarity index 100%
rename from include/linux/net_tstamp.h
rename to include/uapi/linux/net_tstamp.h
diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h
new file mode 100644
index 0000000000000000000000000000000000000000..6b9500bc2d56a0338b39dbf1b46540edc6ffe141
--- /dev/null
+++ b/include/uapi/linux/netdevice.h
@@ -0,0 +1,53 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Interfaces handler.
+ *
+ * Version:	@(#)dev.h	1.0.10	08/12/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Bjorn Ekwall. <bj0rn@blox.se>
+ *              Pekka Riikonen <priikone@poseidon.pspt.fi>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *		Moved to /usr/include/linux for NET3
+ */
+#ifndef _UAPI_LINUX_NETDEVICE_H
+#define _UAPI_LINUX_NETDEVICE_H
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_link.h>
+
+
+#define MAX_ADDR_LEN	32		/* Largest hardware address length */
+
+/* Initial net device group. All devices belong to group 0 by default. */
+#define INIT_NETDEV_GROUP	0
+
+
+
+/* Media selection options. */
+enum {
+        IF_PORT_UNKNOWN = 0,
+        IF_PORT_10BASE2,
+        IF_PORT_10BASET,
+        IF_PORT_AUI,
+        IF_PORT_100BASET,
+        IF_PORT_100BASETX,
+        IF_PORT_100BASEFX
+};
+
+
+#endif /* _UAPI_LINUX_NETDEVICE_H */
diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h
new file mode 100644
index 0000000000000000000000000000000000000000..f7dc0ebeeba552a147b1110fe383a4eb9d6e0b13
--- /dev/null
+++ b/include/uapi/linux/netfilter.h
@@ -0,0 +1,72 @@
+#ifndef _UAPI__LINUX_NETFILTER_H
+#define _UAPI__LINUX_NETFILTER_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/sysctl.h>
+
+
+/* Responses from hook functions. */
+#define NF_DROP 0
+#define NF_ACCEPT 1
+#define NF_STOLEN 2
+#define NF_QUEUE 3
+#define NF_REPEAT 4
+#define NF_STOP 5
+#define NF_MAX_VERDICT NF_STOP
+
+/* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+ * arguments. */
+#define NF_VERDICT_MASK 0x000000ff
+
+/* extra verdict flags have mask 0x0000ff00 */
+#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
+
+/* queue number (NF_QUEUE) or errno (NF_DROP) */
+#define NF_VERDICT_QMASK 0xffff0000
+#define NF_VERDICT_QBITS 16
+
+#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
+
+#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+/* Generic cache responses from hook functions.
+   <= 0x2000 is used for protocol-flags. */
+#define NFC_UNKNOWN 0x4000
+#define NFC_ALTERED 0x8000
+
+/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
+#define NF_VERDICT_BITS 16
+#endif
+
+enum nf_inet_hooks {
+	NF_INET_PRE_ROUTING,
+	NF_INET_LOCAL_IN,
+	NF_INET_FORWARD,
+	NF_INET_LOCAL_OUT,
+	NF_INET_POST_ROUTING,
+	NF_INET_NUMHOOKS
+};
+
+enum {
+	NFPROTO_UNSPEC =  0,
+	NFPROTO_IPV4   =  2,
+	NFPROTO_ARP    =  3,
+	NFPROTO_BRIDGE =  7,
+	NFPROTO_IPV6   = 10,
+	NFPROTO_DECNET = 12,
+	NFPROTO_NUMPROTO,
+};
+
+union nf_inet_addr {
+	__u32		all[4];
+	__be32		ip;
+	__be32		ip6[4];
+	struct in_addr	in;
+	struct in6_addr	in6;
+};
+
+#endif /* _UAPI__LINUX_NETFILTER_H */
diff --git a/include/linux/netfilter_arp.h b/include/uapi/linux/netfilter_arp.h
similarity index 100%
rename from include/linux/netfilter_arp.h
rename to include/uapi/linux/netfilter_arp.h
diff --git a/include/uapi/linux/netfilter_bridge.h b/include/uapi/linux/netfilter_bridge.h
new file mode 100644
index 0000000000000000000000000000000000000000..a5eda6db8d79ce361e1fea840a0092c70a48e853
--- /dev/null
+++ b/include/uapi/linux/netfilter_bridge.h
@@ -0,0 +1,27 @@
+#ifndef _UAPI__LINUX_BRIDGE_NETFILTER_H
+#define _UAPI__LINUX_BRIDGE_NETFILTER_H
+
+/* bridge-specific defines for netfilter. 
+ */
+
+#include <linux/netfilter.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/if_pppox.h>
+
+/* Bridge Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_BR_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_BR_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_BR_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_BR_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_BR_POST_ROUTING	4
+/* Not really a hook, but used for the ebtables broute table */
+#define NF_BR_BROUTING		5
+#define NF_BR_NUMHOOKS		6
+
+#endif /* _UAPI__LINUX_BRIDGE_NETFILTER_H */
diff --git a/include/linux/netfilter_decnet.h b/include/uapi/linux/netfilter_decnet.h
similarity index 100%
rename from include/linux/netfilter_decnet.h
rename to include/uapi/linux/netfilter_decnet.h
diff --git a/include/uapi/linux/netfilter_ipv4.h b/include/uapi/linux/netfilter_ipv4.h
new file mode 100644
index 0000000000000000000000000000000000000000..91ddd1f6fd4b817dfd628e9e6976c470b44f311e
--- /dev/null
+++ b/include/uapi/linux/netfilter_ipv4.h
@@ -0,0 +1,81 @@
+/* IPv4-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+#ifndef _UAPI__LINUX_IP_NETFILTER_H
+#define _UAPI__LINUX_IP_NETFILTER_H
+
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP_SRC		0x0001
+/* Dest IP address. */
+#define NFC_IP_DST		0x0002
+/* Input device. */
+#define NFC_IP_IF_IN		0x0004
+/* Output device. */
+#define NFC_IP_IF_OUT		0x0008
+/* TOS. */
+#define NFC_IP_TOS		0x0010
+/* Protocol. */
+#define NFC_IP_PROTO		0x0020
+/* IP options. */
+#define NFC_IP_OPTIONS		0x0040
+/* Frag & flags. */
+#define NFC_IP_FRAG		0x0080
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP_TCPFLAGS		0x0100
+/* Source port. */
+#define NFC_IP_SRC_PT		0x0200
+/* Dest port. */
+#define NFC_IP_DST_PT		0x0400
+/* Something else about the proto */
+#define NFC_IP_PROTO_UNKNOWN	0x2000
+
+/* IP Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP_POST_ROUTING	4
+#define NF_IP_NUMHOOKS		5
+#endif /* ! __KERNEL__ */
+
+enum nf_ip_hook_priorities {
+	NF_IP_PRI_FIRST = INT_MIN,
+	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP_PRI_RAW = -300,
+	NF_IP_PRI_SELINUX_FIRST = -225,
+	NF_IP_PRI_CONNTRACK = -200,
+	NF_IP_PRI_MANGLE = -150,
+	NF_IP_PRI_NAT_DST = -100,
+	NF_IP_PRI_FILTER = 0,
+	NF_IP_PRI_SECURITY = 50,
+	NF_IP_PRI_NAT_SRC = 100,
+	NF_IP_PRI_SELINUX_LAST = 225,
+	NF_IP_PRI_CONNTRACK_HELPER = 300,
+	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
+	NF_IP_PRI_LAST = INT_MAX,
+};
+
+/* Arguments for setsockopt SOL_IP: */
+/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
+/* 2.2 firewalling (+ masq) went from 64 through 76 */
+/* 2.4 firewalling went 64 through 67. */
+#define SO_ORIGINAL_DST 80
+
+
+#endif /* _UAPI__LINUX_IP_NETFILTER_H */
diff --git a/include/uapi/linux/netfilter_ipv6.h b/include/uapi/linux/netfilter_ipv6.h
new file mode 100644
index 0000000000000000000000000000000000000000..12497c6c7949c9c4f5c2741afaac76bdbb988564
--- /dev/null
+++ b/include/uapi/linux/netfilter_ipv6.h
@@ -0,0 +1,79 @@
+/* IPv6-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ * (C)1999 David Jeffery
+ *   this header was blatantly ripped from netfilter_ipv4.h 
+ *   it's amazing what adding a bunch of 6s can do =8^)
+ */
+#ifndef _UAPI__LINUX_IP6_NETFILTER_H
+#define _UAPI__LINUX_IP6_NETFILTER_H
+
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP6_SRC              0x0001
+/* Dest IP address. */
+#define NFC_IP6_DST              0x0002
+/* Input device. */
+#define NFC_IP6_IF_IN            0x0004
+/* Output device. */
+#define NFC_IP6_IF_OUT           0x0008
+/* TOS. */
+#define NFC_IP6_TOS              0x0010
+/* Protocol. */
+#define NFC_IP6_PROTO            0x0020
+/* IP options. */
+#define NFC_IP6_OPTIONS          0x0040
+/* Frag & flags. */
+#define NFC_IP6_FRAG             0x0080
+
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP6_TCPFLAGS         0x0100
+/* Source port. */
+#define NFC_IP6_SRC_PT           0x0200
+/* Dest port. */
+#define NFC_IP6_DST_PT           0x0400
+/* Something else about the proto */
+#define NFC_IP6_PROTO_UNKNOWN    0x2000
+
+/* IP6 Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP6_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP6_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP6_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP6_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP6_POST_ROUTING	4
+#define NF_IP6_NUMHOOKS		5
+#endif /* ! __KERNEL__ */
+
+
+enum nf_ip6_hook_priorities {
+	NF_IP6_PRI_FIRST = INT_MIN,
+	NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP6_PRI_RAW = -300,
+	NF_IP6_PRI_SELINUX_FIRST = -225,
+	NF_IP6_PRI_CONNTRACK = -200,
+	NF_IP6_PRI_MANGLE = -150,
+	NF_IP6_PRI_NAT_DST = -100,
+	NF_IP6_PRI_FILTER = 0,
+	NF_IP6_PRI_SECURITY = 50,
+	NF_IP6_PRI_NAT_SRC = 100,
+	NF_IP6_PRI_SELINUX_LAST = 225,
+	NF_IP6_PRI_CONNTRACK_HELPER = 300,
+	NF_IP6_PRI_LAST = INT_MAX,
+};
+
+
+#endif /* _UAPI__LINUX_IP6_NETFILTER_H */
diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h
new file mode 100644
index 0000000000000000000000000000000000000000..78d5b8a546d63fb73cf45a2ab08a48ce02486dba
--- /dev/null
+++ b/include/uapi/linux/netlink.h
@@ -0,0 +1,153 @@
+#ifndef _UAPI__LINUX_NETLINK_H
+#define _UAPI__LINUX_NETLINK_H
+
+#include <linux/socket.h> /* for __kernel_sa_family_t */
+#include <linux/types.h>
+
+#define NETLINK_ROUTE		0	/* Routing/device hook				*/
+#define NETLINK_UNUSED		1	/* Unused number				*/
+#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
+#define NETLINK_FIREWALL	3	/* Unused number, formerly ip_queue		*/
+#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
+#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
+#define NETLINK_XFRM		6	/* ipsec */
+#define NETLINK_SELINUX		7	/* SELinux event notifications */
+#define NETLINK_ISCSI		8	/* Open-iSCSI */
+#define NETLINK_AUDIT		9	/* auditing */
+#define NETLINK_FIB_LOOKUP	10	
+#define NETLINK_CONNECTOR	11
+#define NETLINK_NETFILTER	12	/* netfilter subsystem */
+#define NETLINK_IP6_FW		13
+#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
+#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
+#define NETLINK_GENERIC		16
+/* leave room for NETLINK_DM (DM Events) */
+#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
+#define NETLINK_ECRYPTFS	19
+#define NETLINK_RDMA		20
+#define NETLINK_CRYPTO		21	/* Crypto layer */
+
+#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
+
+#define MAX_LINKS 32		
+
+struct sockaddr_nl {
+	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
+	unsigned short	nl_pad;		/* zero		*/
+	__u32		nl_pid;		/* port ID	*/
+       	__u32		nl_groups;	/* multicast groups mask */
+};
+
+struct nlmsghdr {
+	__u32		nlmsg_len;	/* Length of message including header */
+	__u16		nlmsg_type;	/* Message content */
+	__u16		nlmsg_flags;	/* Additional flags */
+	__u32		nlmsg_seq;	/* Sequence number */
+	__u32		nlmsg_pid;	/* Sending process port ID */
+};
+
+/* Flags values */
+
+#define NLM_F_REQUEST		1	/* It is request message. 	*/
+#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
+#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
+#define NLM_F_ECHO		8	/* Echo this request 		*/
+#define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
+
+/* Modifiers to GET request */
+#define NLM_F_ROOT	0x100	/* specify tree	root	*/
+#define NLM_F_MATCH	0x200	/* return all matching	*/
+#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
+#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
+
+/* Modifiers to NEW request */
+#define NLM_F_REPLACE	0x100	/* Override existing		*/
+#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
+#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
+#define NLM_F_APPEND	0x800	/* Add to end of list		*/
+
+/*
+   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
+   4.4BSD CHANGE	NLM_F_REPLACE
+
+   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
+   Append		NLM_F_CREATE
+   Check		NLM_F_EXCL
+ */
+
+#define NLMSG_ALIGNTO	4U
+#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
+#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
+#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
+#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
+#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
+#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
+				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
+#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len <= (len))
+#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
+
+#define NLMSG_NOOP		0x1	/* Nothing.		*/
+#define NLMSG_ERROR		0x2	/* Error		*/
+#define NLMSG_DONE		0x3	/* End of a dump	*/
+#define NLMSG_OVERRUN		0x4	/* Data lost		*/
+
+#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
+
+struct nlmsgerr {
+	int		error;
+	struct nlmsghdr msg;
+};
+
+#define NETLINK_ADD_MEMBERSHIP	1
+#define NETLINK_DROP_MEMBERSHIP	2
+#define NETLINK_PKTINFO		3
+#define NETLINK_BROADCAST_ERROR	4
+#define NETLINK_NO_ENOBUFS	5
+
+struct nl_pktinfo {
+	__u32	group;
+};
+
+#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
+
+enum {
+	NETLINK_UNCONNECTED = 0,
+	NETLINK_CONNECTED,
+};
+
+/*
+ *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ * |        Header       | Pad |     Payload       | Pad |
+ * |   (struct nlattr)   | ing |                   | ing |
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ *  <-------------- nlattr->nla_len -------------->
+ */
+
+struct nlattr {
+	__u16           nla_len;
+	__u16           nla_type;
+};
+
+/*
+ * nla_type (16 bits)
+ * +---+---+-------------------------------+
+ * | N | O | Attribute Type                |
+ * +---+---+-------------------------------+
+ * N := Carries nested attributes
+ * O := Payload stored in network byte order
+ *
+ * Note: The N and O flag are mutually exclusive.
+ */
+#define NLA_F_NESTED		(1 << 15)
+#define NLA_F_NET_BYTEORDER	(1 << 14)
+#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
+
+#define NLA_ALIGNTO		4
+#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
+#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
+
+
+#endif /* _UAPI__LINUX_NETLINK_H */
diff --git a/include/linux/netrom.h b/include/uapi/linux/netrom.h
similarity index 100%
rename from include/linux/netrom.h
rename to include/uapi/linux/netrom.h
diff --git a/include/linux/nfc.h b/include/uapi/linux/nfc.h
similarity index 100%
rename from include/linux/nfc.h
rename to include/uapi/linux/nfc.h
diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h
new file mode 100644
index 0000000000000000000000000000000000000000..5199a36dd57433994adc3fedce353ff2236222f7
--- /dev/null
+++ b/include/uapi/linux/nfs.h
@@ -0,0 +1,131 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants mostly for Version 2 of the protocol,
+ * but also has a couple of NFSv3 bits in (notably the error codes).
+ */
+#ifndef _UAPI_LINUX_NFS_H
+#define _UAPI_LINUX_NFS_H
+
+#define NFS_PROGRAM	100003
+#define NFS_PORT	2049
+#define NFS_MAXDATA	8192
+#define NFS_MAXPATHLEN	1024
+#define NFS_MAXNAMLEN	255
+#define NFS_MAXGROUPS	16
+#define NFS_FHSIZE	32
+#define NFS_COOKIESIZE	4
+#define NFS_FIFO_DEV	(-1)
+#define NFSMODE_FMT	0170000
+#define NFSMODE_DIR	0040000
+#define NFSMODE_CHR	0020000
+#define NFSMODE_BLK	0060000
+#define NFSMODE_REG	0100000
+#define NFSMODE_LNK	0120000
+#define NFSMODE_SOCK	0140000
+#define NFSMODE_FIFO	0010000
+
+#define NFS_MNT_PROGRAM		100005
+#define NFS_MNT_VERSION		1
+#define NFS_MNT3_VERSION	3
+
+#define NFS_PIPE_DIRNAME "nfs"
+
+/*
+ * NFS stats. The good thing with these values is that NFSv3 errors are
+ * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
+ * no-one uses anyway), so we can happily mix code as long as we make sure
+ * no NFSv3 errors are returned to NFSv2 clients.
+ * Error codes that have a `--' in the v2 column are not part of the
+ * standard, but seem to be widely used nevertheless.
+ */
+ enum nfs_stat {
+	NFS_OK = 0,			/* v2 v3 v4 */
+	NFSERR_PERM = 1,		/* v2 v3 v4 */
+	NFSERR_NOENT = 2,		/* v2 v3 v4 */
+	NFSERR_IO = 5,			/* v2 v3 v4 */
+	NFSERR_NXIO = 6,		/* v2 v3 v4 */
+	NFSERR_EAGAIN = 11,		/* v2 v3 */
+	NFSERR_ACCES = 13,		/* v2 v3 v4 */
+	NFSERR_EXIST = 17,		/* v2 v3 v4 */
+	NFSERR_XDEV = 18,		/*    v3 v4 */
+	NFSERR_NODEV = 19,		/* v2 v3 v4 */
+	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
+	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
+	NFSERR_INVAL = 22,		/* v2 v3 v4 */
+	NFSERR_FBIG = 27,		/* v2 v3 v4 */
+	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
+	NFSERR_ROFS = 30,		/* v2 v3 v4 */
+	NFSERR_MLINK = 31,		/*    v3 v4 */
+	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
+	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
+	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
+	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
+	NFSERR_STALE = 70,		/* v2 v3 v4 */
+	NFSERR_REMOTE = 71,		/* v2 v3 */
+	NFSERR_WFLUSH = 99,		/* v2    */
+	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
+	NFSERR_NOT_SYNC = 10002,	/*    v3 */
+	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
+	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
+	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
+	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
+	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
+	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
+	NFSERR_SAME = 10009,		/*       v4 */
+	NFSERR_DENIED = 10010,		/*       v4 */
+	NFSERR_EXPIRED = 10011,		/*       v4 */
+	NFSERR_LOCKED = 10012,		/*       v4 */
+	NFSERR_GRACE = 10013,		/*       v4 */
+	NFSERR_FHEXPIRED = 10014,	/*       v4 */
+	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
+	NFSERR_WRONGSEC = 10016,	/*       v4 */
+	NFSERR_CLID_INUSE = 10017,	/*       v4 */
+	NFSERR_RESOURCE = 10018,	/*       v4 */
+	NFSERR_MOVED = 10019,		/*       v4 */
+	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
+	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
+	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
+	NFSERR_STALE_STATEID = 10023,   /*       v4 */
+	NFSERR_OLD_STATEID = 10024,     /*       v4 */
+	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
+	NFSERR_BAD_SEQID = 10026,	/*       v4 */
+	NFSERR_NOT_SAME = 10027,	/*       v4 */
+	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
+	NFSERR_SYMLINK = 10029,		/*       v4 */
+	NFSERR_RESTOREFH = 10030,	/*       v4 */
+	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
+	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
+	NFSERR_NO_GRACE = 10033,	/*       v4 */
+	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
+	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
+	NFSERR_BAD_XDR = 10036,		/*       v4 */
+	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
+	NFSERR_OPENMODE = 10038,       /*       v4 */
+	NFSERR_BADOWNER = 10039,       /*       v4 */
+	NFSERR_BADCHAR = 10040,        /*       v4 */
+	NFSERR_BADNAME = 10041,        /*       v4 */
+	NFSERR_BAD_RANGE = 10042,      /*       v4 */
+	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
+	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
+	NFSERR_DEADLOCK = 10045,       /*       v4 */
+	NFSERR_FILE_OPEN = 10046,      /*       v4 */
+	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
+	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
+};
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+
+enum nfs_ftype {
+	NFNON = 0,
+	NFREG = 1,
+	NFDIR = 2,
+	NFBLK = 3,
+	NFCHR = 4,
+	NFLNK = 5,
+	NFSOCK = 6,
+	NFBAD = 7,
+	NFFIFO = 8
+};
+
+#endif /* _UAPI_LINUX_NFS_H */
diff --git a/include/linux/nfs2.h b/include/uapi/linux/nfs2.h
similarity index 100%
rename from include/linux/nfs2.h
rename to include/uapi/linux/nfs2.h
diff --git a/include/uapi/linux/nfs3.h b/include/uapi/linux/nfs3.h
new file mode 100644
index 0000000000000000000000000000000000000000..231ef4e6982957c23b6779be61aa6d3cbcf117cf
--- /dev/null
+++ b/include/uapi/linux/nfs3.h
@@ -0,0 +1,97 @@
+/*
+ * NFSv3 protocol definitions
+ */
+#ifndef _UAPI_LINUX_NFS3_H
+#define _UAPI_LINUX_NFS3_H
+
+#define NFS3_PORT		2049
+#define NFS3_MAXDATA		32768
+#define NFS3_MAXPATHLEN		PATH_MAX
+#define NFS3_MAXNAMLEN		NAME_MAX
+#define NFS3_MAXGROUPS		16
+#define NFS3_FHSIZE		64
+#define NFS3_COOKIESIZE		4
+#define NFS3_CREATEVERFSIZE	8
+#define NFS3_COOKIEVERFSIZE	8
+#define NFS3_WRITEVERFSIZE	8
+#define NFS3_FIFO_DEV		(-1)
+#define NFS3MODE_FMT		0170000
+#define NFS3MODE_DIR		0040000
+#define NFS3MODE_CHR		0020000
+#define NFS3MODE_BLK		0060000
+#define NFS3MODE_REG		0100000
+#define NFS3MODE_LNK		0120000
+#define NFS3MODE_SOCK		0140000
+#define NFS3MODE_FIFO		0010000
+
+/* Flags for access() call */
+#define NFS3_ACCESS_READ	0x0001
+#define NFS3_ACCESS_LOOKUP	0x0002
+#define NFS3_ACCESS_MODIFY	0x0004
+#define NFS3_ACCESS_EXTEND	0x0008
+#define NFS3_ACCESS_DELETE	0x0010
+#define NFS3_ACCESS_EXECUTE	0x0020
+#define NFS3_ACCESS_FULL	0x003f
+
+/* Flags for create mode */
+enum nfs3_createmode {
+	NFS3_CREATE_UNCHECKED = 0,
+	NFS3_CREATE_GUARDED = 1,
+	NFS3_CREATE_EXCLUSIVE = 2
+};
+
+/* NFSv3 file system properties */
+#define NFS3_FSF_LINK		0x0001
+#define NFS3_FSF_SYMLINK	0x0002
+#define NFS3_FSF_HOMOGENEOUS	0x0008
+#define NFS3_FSF_CANSETTIME	0x0010
+/* Some shorthands. See fs/nfsd/nfs3proc.c */
+#define NFS3_FSF_DEFAULT	0x001B
+#define NFS3_FSF_BILLYBOY	0x0018
+#define NFS3_FSF_READONLY	0x0008
+
+enum nfs3_ftype {
+	NF3NON  = 0,
+	NF3REG  = 1,
+	NF3DIR  = 2,
+	NF3BLK  = 3,
+	NF3CHR  = 4,
+	NF3LNK  = 5,
+	NF3SOCK = 6,
+	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
+	NF3BAD  = 8
+};
+
+struct nfs3_fh {
+	unsigned short size;
+	unsigned char  data[NFS3_FHSIZE];
+};
+
+#define NFS3_VERSION		3
+#define NFS3PROC_NULL		0
+#define NFS3PROC_GETATTR	1
+#define NFS3PROC_SETATTR	2
+#define NFS3PROC_LOOKUP		3
+#define NFS3PROC_ACCESS		4
+#define NFS3PROC_READLINK	5
+#define NFS3PROC_READ		6
+#define NFS3PROC_WRITE		7
+#define NFS3PROC_CREATE		8
+#define NFS3PROC_MKDIR		9
+#define NFS3PROC_SYMLINK	10
+#define NFS3PROC_MKNOD		11
+#define NFS3PROC_REMOVE		12
+#define NFS3PROC_RMDIR		13
+#define NFS3PROC_RENAME		14
+#define NFS3PROC_LINK		15
+#define NFS3PROC_READDIR	16
+#define NFS3PROC_READDIRPLUS	17
+#define NFS3PROC_FSSTAT		18
+#define NFS3PROC_FSINFO		19
+#define NFS3PROC_PATHCONF	20
+#define NFS3PROC_COMMIT		21
+
+#define NFS_MNT3_VERSION	3
+ 
+
+#endif /* _UAPI_LINUX_NFS3_H */
diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h
new file mode 100644
index 0000000000000000000000000000000000000000..788128ebac45e4238a0a2338a494d5f4eb74dfac
--- /dev/null
+++ b/include/uapi/linux/nfs4.h
@@ -0,0 +1,178 @@
+/*
+ *  include/linux/nfs4.h
+ *
+ *  NFSv4 protocol definitions.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Kendrick Smith <kmsmith@umich.edu>
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+#ifndef _UAPI_LINUX_NFS4_H
+#define _UAPI_LINUX_NFS4_H
+
+#include <linux/types.h>
+
+#define NFS4_BITMAP_SIZE	2
+#define NFS4_VERIFIER_SIZE	8
+#define NFS4_STATEID_SEQID_SIZE 4
+#define NFS4_STATEID_OTHER_SIZE 12
+#define NFS4_STATEID_SIZE	(NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
+#define NFS4_FHSIZE		128
+#define NFS4_MAXPATHLEN		PATH_MAX
+#define NFS4_MAXNAMLEN		NAME_MAX
+#define NFS4_OPAQUE_LIMIT	1024
+#define NFS4_MAX_SESSIONID_LEN	16
+
+#define NFS4_ACCESS_READ        0x0001
+#define NFS4_ACCESS_LOOKUP      0x0002
+#define NFS4_ACCESS_MODIFY      0x0004
+#define NFS4_ACCESS_EXTEND      0x0008
+#define NFS4_ACCESS_DELETE      0x0010
+#define NFS4_ACCESS_EXECUTE     0x0020
+
+#define NFS4_FH_PERSISTENT		0x0000
+#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
+#define NFS4_FH_VOLATILE_ANY		0x0002
+#define NFS4_FH_VOL_MIGRATION		0x0004
+#define NFS4_FH_VOL_RENAME		0x0008
+
+#define NFS4_OPEN_RESULT_CONFIRM 0x0002
+#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+
+#define NFS4_SHARE_ACCESS_MASK	0x000F
+#define NFS4_SHARE_ACCESS_READ	0x0001
+#define NFS4_SHARE_ACCESS_WRITE	0x0002
+#define NFS4_SHARE_ACCESS_BOTH	0x0003
+#define NFS4_SHARE_DENY_READ	0x0001
+#define NFS4_SHARE_DENY_WRITE	0x0002
+#define NFS4_SHARE_DENY_BOTH	0x0003
+
+/* nfs41 */
+#define NFS4_SHARE_WANT_MASK		0xFF00
+#define NFS4_SHARE_WANT_NO_PREFERENCE	0x0000
+#define NFS4_SHARE_WANT_READ_DELEG	0x0100
+#define NFS4_SHARE_WANT_WRITE_DELEG	0x0200
+#define NFS4_SHARE_WANT_ANY_DELEG	0x0300
+#define NFS4_SHARE_WANT_NO_DELEG	0x0400
+#define NFS4_SHARE_WANT_CANCEL		0x0500
+
+#define NFS4_SHARE_WHEN_MASK		0xF0000
+#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL	0x10000
+#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED		0x20000
+
+#define NFS4_CDFC4_FORE	0x1
+#define NFS4_CDFC4_BACK 0x2
+#define NFS4_CDFC4_BOTH 0x3
+#define NFS4_CDFC4_FORE_OR_BOTH 0x3
+#define NFS4_CDFC4_BACK_OR_BOTH 0x7
+
+#define NFS4_CDFS4_FORE 0x1
+#define NFS4_CDFS4_BACK 0x2
+#define NFS4_CDFS4_BOTH 0x3
+
+#define NFS4_SET_TO_SERVER_TIME	0
+#define NFS4_SET_TO_CLIENT_TIME	1
+
+#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
+#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
+#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
+#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
+
+#define ACL4_SUPPORT_ALLOW_ACL 0x01
+#define ACL4_SUPPORT_DENY_ACL  0x02
+#define ACL4_SUPPORT_AUDIT_ACL 0x04
+#define ACL4_SUPPORT_ALARM_ACL 0x08
+
+#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
+#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
+#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
+#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
+#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
+#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
+#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
+
+#define NFS4_ACE_READ_DATA                    0x00000001
+#define NFS4_ACE_LIST_DIRECTORY               0x00000001
+#define NFS4_ACE_WRITE_DATA                   0x00000002
+#define NFS4_ACE_ADD_FILE                     0x00000002
+#define NFS4_ACE_APPEND_DATA                  0x00000004
+#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
+#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
+#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
+#define NFS4_ACE_EXECUTE                      0x00000020
+#define NFS4_ACE_DELETE_CHILD                 0x00000040
+#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
+#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
+#define NFS4_ACE_DELETE                       0x00010000
+#define NFS4_ACE_READ_ACL                     0x00020000
+#define NFS4_ACE_WRITE_ACL                    0x00040000
+#define NFS4_ACE_WRITE_OWNER                  0x00080000
+#define NFS4_ACE_SYNCHRONIZE                  0x00100000
+#define NFS4_ACE_GENERIC_READ                 0x00120081
+#define NFS4_ACE_GENERIC_WRITE                0x00160106
+#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
+#define NFS4_ACE_MASK_ALL                     0x001F01FF
+
+#define EXCHGID4_FLAG_SUPP_MOVED_REFER		0x00000001
+#define EXCHGID4_FLAG_SUPP_MOVED_MIGR		0x00000002
+#define EXCHGID4_FLAG_BIND_PRINC_STATEID	0x00000100
+
+#define EXCHGID4_FLAG_USE_NON_PNFS		0x00010000
+#define EXCHGID4_FLAG_USE_PNFS_MDS		0x00020000
+#define EXCHGID4_FLAG_USE_PNFS_DS		0x00040000
+#define EXCHGID4_FLAG_MASK_PNFS			0x00070000
+
+#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A	0x40000000
+#define EXCHGID4_FLAG_CONFIRMED_R		0x80000000
+/*
+ * Since the validity of these bits depends on whether
+ * they're set in the argument or response, have separate
+ * invalid flag masks for arg (_A) and resp (_R).
+ */
+#define EXCHGID4_FLAG_MASK_A			0x40070103
+#define EXCHGID4_FLAG_MASK_R			0x80070103
+
+#define SEQ4_STATUS_CB_PATH_DOWN		0x00000001
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING	0x00000002
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED	0x00000004
+#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED	0x00000008
+#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED	0x00000010
+#define SEQ4_STATUS_ADMIN_STATE_REVOKED		0x00000020
+#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED	0x00000040
+#define SEQ4_STATUS_LEASE_MOVED			0x00000080
+#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED	0x00000100
+#define SEQ4_STATUS_CB_PATH_DOWN_SESSION	0x00000200
+#define SEQ4_STATUS_BACKCHANNEL_FAULT		0x00000400
+
+#define NFS4_SECINFO_STYLE4_CURRENT_FH	0
+#define NFS4_SECINFO_STYLE4_PARENT	1
+
+#define NFS4_MAX_UINT64	(~(u64)0)
+
+/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
+ * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
+ */
+#define NFS4_MAX_OPS   8
+
+/* Our NFS4 client back channel server only wants the cb_sequene and the
+ * actual operation per compound
+ */
+#define NFS4_MAX_BACK_CHANNEL_OPS 2
+
+enum nfs4_acl_whotype {
+	NFS4_ACL_WHO_NAMED = 0,
+	NFS4_ACL_WHO_OWNER,
+	NFS4_ACL_WHO_GROUP,
+	NFS4_ACL_WHO_EVERYONE,
+};
+
+#endif /* _UAPI_LINUX_NFS4_H */
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/nfs4_mount.h b/include/uapi/linux/nfs4_mount.h
similarity index 100%
rename from include/linux/nfs4_mount.h
rename to include/uapi/linux/nfs4_mount.h
diff --git a/include/uapi/linux/nfs_fs.h b/include/uapi/linux/nfs_fs.h
new file mode 100644
index 0000000000000000000000000000000000000000..49142287999c72cbf03679cfa3afbd9e10df12d1
--- /dev/null
+++ b/include/uapi/linux/nfs_fs.h
@@ -0,0 +1,61 @@
+/*
+ *  linux/include/linux/nfs_fs.h
+ *
+ *  Copyright (C) 1992  Rick Sladkey
+ *
+ *  OS-specific nfs filesystem definitions and declarations
+ */
+
+#ifndef _UAPI_LINUX_NFS_FS_H
+#define _UAPI_LINUX_NFS_FS_H
+
+#include <linux/magic.h>
+
+/* Default timeout values */
+#define NFS_DEF_UDP_TIMEO	(11)
+#define NFS_DEF_UDP_RETRANS	(3)
+#define NFS_DEF_TCP_TIMEO	(600)
+#define NFS_DEF_TCP_RETRANS	(2)
+
+#define NFS_MAX_UDP_TIMEOUT	(60*HZ)
+#define NFS_MAX_TCP_TIMEOUT	(600*HZ)
+
+#define NFS_DEF_ACREGMIN	(3)
+#define NFS_DEF_ACREGMAX	(60)
+#define NFS_DEF_ACDIRMIN	(30)
+#define NFS_DEF_ACDIRMAX	(60)
+
+/*
+ * When flushing a cluster of dirty pages, there can be different
+ * strategies:
+ */
+#define FLUSH_SYNC		1	/* file being synced, or contention */
+#define FLUSH_STABLE		4	/* commit to stable storage */
+#define FLUSH_LOWPRI		8	/* low priority background flush */
+#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
+#define FLUSH_COND_STABLE	32	/* conditional stable write - only stable
+					 * if everything fits in one RPC */
+
+
+/*
+ * NFS debug flags
+ */
+#define NFSDBG_VFS		0x0001
+#define NFSDBG_DIRCACHE		0x0002
+#define NFSDBG_LOOKUPCACHE	0x0004
+#define NFSDBG_PAGECACHE	0x0008
+#define NFSDBG_PROC		0x0010
+#define NFSDBG_XDR		0x0020
+#define NFSDBG_FILE		0x0040
+#define NFSDBG_ROOT		0x0080
+#define NFSDBG_CALLBACK		0x0100
+#define NFSDBG_CLIENT		0x0200
+#define NFSDBG_MOUNT		0x0400
+#define NFSDBG_FSCACHE		0x0800
+#define NFSDBG_PNFS		0x1000
+#define NFSDBG_PNFS_LD		0x2000
+#define NFSDBG_STATE		0x4000
+#define NFSDBG_ALL		0xFFFF
+
+
+#endif /* _UAPI_LINUX_NFS_FS_H */
diff --git a/include/uapi/linux/nfs_idmap.h b/include/uapi/linux/nfs_idmap.h
new file mode 100644
index 0000000000000000000000000000000000000000..8d4b1c7b24d4a57e3ec46b4d2e6b249fd946017f
--- /dev/null
+++ b/include/uapi/linux/nfs_idmap.h
@@ -0,0 +1,65 @@
+/*
+ * include/linux/nfs_idmap.h
+ *
+ *  UID and GID to name mapping for clients.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Marius Aamodt Eriksen <marius@umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _UAPINFS_IDMAP_H
+#define _UAPINFS_IDMAP_H
+
+#include <linux/types.h>
+
+/* XXX from bits/utmp.h  */
+#define IDMAP_NAMESZ  128
+
+#define IDMAP_TYPE_USER  0
+#define IDMAP_TYPE_GROUP 1
+
+#define IDMAP_CONV_IDTONAME 0
+#define IDMAP_CONV_NAMETOID 1
+
+#define IDMAP_STATUS_INVALIDMSG 0x01
+#define IDMAP_STATUS_AGAIN      0x02
+#define IDMAP_STATUS_LOOKUPFAIL 0x04
+#define IDMAP_STATUS_SUCCESS    0x08
+
+struct idmap_msg {
+	__u8  im_type;
+	__u8  im_conv;
+	char  im_name[IDMAP_NAMESZ];
+	__u32 im_id;
+	__u8  im_status;
+};
+
+
+#endif /* _UAPINFS_IDMAP_H */
diff --git a/include/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h
similarity index 100%
rename from include/linux/nfs_mount.h
rename to include/uapi/linux/nfs_mount.h
diff --git a/include/uapi/linux/nfsacl.h b/include/uapi/linux/nfsacl.h
new file mode 100644
index 0000000000000000000000000000000000000000..9bb9771a107f22eb66c3045acc573420e32ba0e5
--- /dev/null
+++ b/include/uapi/linux/nfsacl.h
@@ -0,0 +1,29 @@
+/*
+ * File: linux/nfsacl.h
+ *
+ * (C) 2003 Andreas Gruenbacher <agruen@suse.de>
+ */
+#ifndef _UAPI__LINUX_NFSACL_H
+#define _UAPI__LINUX_NFSACL_H
+
+#define NFS_ACL_PROGRAM	100227
+
+#define ACLPROC2_GETACL		1
+#define ACLPROC2_SETACL		2
+#define ACLPROC2_GETATTR	3
+#define ACLPROC2_ACCESS		4
+
+#define ACLPROC3_GETACL		1
+#define ACLPROC3_SETACL		2
+
+
+/* Flags for the getacl/setacl mode */
+#define NFS_ACL			0x0001
+#define NFS_ACLCNT		0x0002
+#define NFS_DFACL		0x0004
+#define NFS_DFACLCNT		0x0008
+
+/* Flag for Default ACL entries */
+#define NFS_ACL_DEFAULT		0x1000
+
+#endif /* _UAPI__LINUX_NFSACL_H */
diff --git a/include/linux/nl80211.h b/include/uapi/linux/nl80211.h
similarity index 100%
rename from include/linux/nl80211.h
rename to include/uapi/linux/nl80211.h
diff --git a/include/uapi/linux/nubus.h b/include/uapi/linux/nubus.h
new file mode 100644
index 0000000000000000000000000000000000000000..77513d2b5638ec9ff6d21272b203927041575e32
--- /dev/null
+++ b/include/uapi/linux/nubus.h
@@ -0,0 +1,244 @@
+/*
+  nubus.h: various definitions and prototypes for NuBus drivers to use.
+
+  Originally written by Alan Cox.
+
+  Hacked to death by C. Scott Ananian and David Huggins-Daines.
+  
+  Some of the constants in here are from the corresponding
+  NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
+  rest of them on our own. */
+
+#ifndef _UAPILINUX_NUBUS_H
+#define _UAPILINUX_NUBUS_H
+
+#include <linux/types.h>
+
+enum nubus_category {
+	NUBUS_CAT_BOARD          = 0x0001,
+	NUBUS_CAT_DISPLAY        = 0x0003,
+	NUBUS_CAT_NETWORK        = 0x0004,
+	NUBUS_CAT_COMMUNICATIONS = 0x0006,
+	NUBUS_CAT_FONT           = 0x0009,
+	NUBUS_CAT_CPU            = 0x000A,
+	/* For lack of a better name */
+	NUBUS_CAT_DUODOCK        = 0x0020
+};
+
+enum nubus_type_network {
+	NUBUS_TYPE_ETHERNET      = 0x0001,
+	NUBUS_TYPE_RS232         = 0x0002
+};
+
+enum nubus_type_display {
+	NUBUS_TYPE_VIDEO         = 0x0001
+};
+
+enum nubus_type_cpu {
+	NUBUS_TYPE_68020         = 0x0003,
+	NUBUS_TYPE_68030         = 0x0004,
+	NUBUS_TYPE_68040         = 0x0005
+};
+
+/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
+ *  68030 motherboards: <10,4,0,24>
+ *  68040 motherboards: <10,5,0,24>
+ *  DuoDock Plus: <32,1,1,2>
+ *
+ *  Toby Frame Buffer card: <3,1,1,1>
+ *  RBV built-in video (IIci): <3,1,1,24>
+ *  Valkyrie built-in video (Q630): <3,1,1,46>
+ *  Macintosh Display Card: <3,1,1,25>
+ *  Sonora built-in video (P460): <3,1,1,34>
+ *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
+ *
+ *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
+ *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
+ *  Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
+ *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
+ *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
+ *   ROM on the above card: <2,1,0,0>
+ *  Cabletron ethernet card: <4,1,1,265>
+ *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
+ *  Kinetics EtherPort IIN: <4,1,259,262>
+ *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
+ *
+ *  Add your devices to the list!  You can obtain the "Slots" utility
+ *  from Apple's FTP site at:
+ *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
+ *
+ *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
+ *  or from its distribution site: ftp://ftp.decismkr.com/dms
+ */
+
+/* DrSW: Uniquely identifies the software interface to a board.  This
+   is usually the one you want to look at when writing a driver.  It's
+   not as useful as you think, though, because as we should know by
+   now (duh), "Apple Compatible" can mean a lot of things... */
+
+/* Add known DrSW values here */
+enum nubus_drsw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRSW_APPLE        = 0x0001,
+	NUBUS_DRSW_APPLE_HIRES  = 0x0013, /* MacII HiRes card driver */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRSW_3COM         = 0x0000,
+	NUBUS_DRSW_CABLETRON    = 0x0001,
+	NUBUS_DRSW_SONIC_LC     = 0x0001,
+	NUBUS_DRSW_KINETICS     = 0x0103,
+	NUBUS_DRSW_ASANTE       = 0x0104,
+	NUBUS_DRSW_TECHWORKS    = 0x0109,
+	NUBUS_DRSW_DAYNA        = 0x010b,
+	NUBUS_DRSW_FARALLON     = 0x010c,
+	NUBUS_DRSW_APPLE_SN     = 0x010f,
+	NUBUS_DRSW_DAYNA2       = 0x0115,
+	NUBUS_DRSW_FOCUS        = 0x011a,
+	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
+	NUBUS_DRSW_DAYNA_LC     = 0x011e,
+
+	/* NUBUS_CAT_CPU */
+	NUBUS_DRSW_NONE         = 0x0000,
+};
+
+/* DrHW: Uniquely identifies the hardware interface to a board (or at
+   least, it should...  some video cards are known to incorrectly
+   identify themselves as Toby cards) */
+
+/* Add known DrHW values here */
+enum nubus_drhw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRHW_APPLE_TFB      = 0x0001, /* Toby frame buffer card */
+	NUBUS_DRHW_APPLE_WVC      = 0x0006, /* Apple Workstation Video Card */
+	NUBUS_DRHW_SIGMA_CLRMAX   = 0x0007, /* Sigma Design ColorMax */
+	NUBUS_DRHW_APPLE_SE30     = 0x0009, /* Apple SE/30 video */
+	NUBUS_DRHW_APPLE_HRVC     = 0x0013, /* Mac II High-Res Video Card */
+	NUBUS_DRHW_APPLE_PVC      = 0x0017, /* Mac II Portrait Video Card */
+	NUBUS_DRHW_APPLE_RBV1     = 0x0018, /* IIci RBV video */
+	NUBUS_DRHW_APPLE_MDC      = 0x0019, /* Macintosh Display Card */
+	NUBUS_DRHW_APPLE_SONORA   = 0x0022, /* Sonora built-in video */
+	NUBUS_DRHW_APPLE_24AC     = 0x002b, /* Mac 24AC Video Card */
+	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
+	NUBUS_DRHW_APPLE_JET      = 0x0029, /* Jet framebuffer (DuoDock) */
+	NUBUS_DRHW_SMAC_GFX       = 0x0105, /* SuperMac GFX */
+	NUBUS_DRHW_RASTER_CB264   = 0x013B, /* RasterOps ColorBoard 264 */
+	NUBUS_DRHW_MICRON_XCEED   = 0x0146, /* Micron Exceed color */
+	NUBUS_DRHW_RDIUS_GSC      = 0x0153, /* Radius GS/C */
+	NUBUS_DRHW_SMAC_SPEC8     = 0x017B, /* SuperMac Spectrum/8 */
+	NUBUS_DRHW_SMAC_SPEC24    = 0x017C, /* SuperMac Spectrum/24 */
+	NUBUS_DRHW_RASTER_CB364   = 0x026F, /* RasterOps ColorBoard 364 */
+	NUBUS_DRHW_RDIUS_DCGX     = 0x027C, /* Radius DirectColor/GX */
+	NUBUS_DRHW_RDIUS_PC8      = 0x0291, /* Radius PrecisionColor 8 */
+	NUBUS_DRHW_LAPIS_PCS8     = 0x0292, /* Lapis ProColorServer 8 */
+	NUBUS_DRHW_RASTER_24XLI   = 0x02A0, /* RasterOps 8/24 XLi */
+	NUBUS_DRHW_RASTER_PBPGT   = 0x02A5, /* RasterOps PaintBoard Prism GT */
+	NUBUS_DRHW_EMACH_FSX      = 0x02AE, /* E-Machines Futura SX */
+	NUBUS_DRHW_RASTER_24XLTV  = 0x02B7, /* RasterOps 24XLTV */
+	NUBUS_DRHW_SMAC_THUND24   = 0x02CB, /* SuperMac Thunder/24 */
+	NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
+	NUBUS_DRHW_RDIUS_PC24XP   = 0x0406, /* Radius PrecisionColor 24Xp */
+	NUBUS_DRHW_RDIUS_PC24X    = 0x040A, /* Radius PrecisionColor 24X */
+	NUBUS_DRHW_RDIUS_PC8XJ    = 0x040B, /* Radius PrecisionColor 8XJ */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRHW_INTERLAN       = 0x0100,
+	NUBUS_DRHW_SMC9194        = 0x0101,
+	NUBUS_DRHW_KINETICS       = 0x0106,
+	NUBUS_DRHW_CABLETRON      = 0x0109,
+	NUBUS_DRHW_ASANTE_LC      = 0x010f,
+	NUBUS_DRHW_SONIC          = 0x0110,
+	NUBUS_DRHW_TECHWORKS      = 0x0112,
+	NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
+	NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
+	NUBUS_DRHW_FOCUS          = 0x011c,
+	NUBUS_DRHW_SONNET         = 0x011d,
+};
+
+/* Resource IDs: These are the identifiers for the various weird and
+   wonderful tidbits of information that may or may not reside in the
+   NuBus ROM directory. */
+enum nubus_res_id {
+	NUBUS_RESID_TYPE         = 0x0001,
+	NUBUS_RESID_NAME         = 0x0002,
+	NUBUS_RESID_ICON         = 0x0003,
+	NUBUS_RESID_DRVRDIR      = 0x0004,
+	NUBUS_RESID_LOADREC      = 0x0005,
+	NUBUS_RESID_BOOTREC      = 0x0006,
+	NUBUS_RESID_FLAGS        = 0x0007,
+	NUBUS_RESID_HWDEVID      = 0x0008,
+	NUBUS_RESID_MINOR_BASEOS = 0x000a,
+	NUBUS_RESID_MINOR_LENGTH = 0x000b,
+	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
+	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
+	NUBUS_RESID_CICN         = 0x000f,
+	NUBUS_RESID_ICL8         = 0x0010,
+	NUBUS_RESID_ICL4         = 0x0011,
+};
+
+/* Category-specific resources. */
+enum nubus_board_res_id {
+	NUBUS_RESID_BOARDID      = 0x0020,
+	NUBUS_RESID_PRAMINITDATA = 0x0021,
+	NUBUS_RESID_PRIMARYINIT  = 0x0022,
+	NUBUS_RESID_TIMEOUTCONST = 0x0023,
+	NUBUS_RESID_VENDORINFO   = 0x0024,
+	NUBUS_RESID_BOARDFLAGS   = 0x0025,
+	NUBUS_RESID_SECONDINIT   = 0x0026,
+
+	/* Not sure why Apple put these next two in here */
+	NUBUS_RESID_VIDNAMES     = 0x0041,
+	NUBUS_RESID_VIDMODES     = 0x007e
+};
+
+/* Fields within the vendor info directory */
+enum nubus_vendor_res_id {
+	NUBUS_RESID_VEND_ID     = 0x0001,
+	NUBUS_RESID_VEND_SERIAL = 0x0002,
+	NUBUS_RESID_VEND_REV    = 0x0003,
+	NUBUS_RESID_VEND_PART   = 0x0004,
+	NUBUS_RESID_VEND_DATE   = 0x0005
+};
+
+enum nubus_net_res_id {
+	NUBUS_RESID_MAC_ADDRESS  = 0x0080
+};
+
+enum nubus_cpu_res_id {
+	NUBUS_RESID_MEMINFO      = 0x0081,
+	NUBUS_RESID_ROMINFO      = 0x0082
+};
+
+enum nubus_display_res_id {
+	NUBUS_RESID_GAMMADIR    = 0x0040,
+	NUBUS_RESID_FIRSTMODE   = 0x0080,
+	NUBUS_RESID_SECONDMODE  = 0x0081,
+	NUBUS_RESID_THIRDMODE   = 0x0082,
+	NUBUS_RESID_FOURTHMODE  = 0x0083,
+	NUBUS_RESID_FIFTHMODE   = 0x0084,
+	NUBUS_RESID_SIXTHMODE   = 0x0085
+};
+
+struct nubus_dir
+{
+	unsigned char *base;
+	unsigned char *ptr;
+	int done;
+	int mask;
+};
+
+struct nubus_dirent
+{
+	unsigned char *base;
+	unsigned char type;
+	__u32 data;	/* Actually 24bits used */
+	int mask;
+};
+
+
+/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
+static inline void *nubus_slot_addr(int slot)
+{
+	return (void *)(0xF0000000|(slot<<24));
+}
+
+#endif /* _UAPILINUX_NUBUS_H */
diff --git a/include/uapi/linux/nvram.h b/include/uapi/linux/nvram.h
new file mode 100644
index 0000000000000000000000000000000000000000..0986c4337383ce4cbcbedb0ced1a871ac81064ee
--- /dev/null
+++ b/include/uapi/linux/nvram.h
@@ -0,0 +1,16 @@
+#ifndef _UAPI_LINUX_NVRAM_H
+#define _UAPI_LINUX_NVRAM_H
+
+#include <linux/ioctl.h>
+
+/* /dev/nvram ioctls */
+#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
+#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
+
+/* for all current systems, this is where NVRAM starts */
+#define NVRAM_FIRST_BYTE    14
+/* all these functions expect an NVRAM offset, not an absolute */
+#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
+
+
+#endif /* _UAPI_LINUX_NVRAM_H */
diff --git a/include/linux/omap3isp.h b/include/uapi/linux/omap3isp.h
similarity index 100%
rename from include/linux/omap3isp.h
rename to include/uapi/linux/omap3isp.h
diff --git a/include/uapi/linux/omapfb.h b/include/uapi/linux/omapfb.h
new file mode 100644
index 0000000000000000000000000000000000000000..7c97bc00ac6d9682ddd8ae32e7ce69d16f4ad116
--- /dev/null
+++ b/include/uapi/linux/omapfb.h
@@ -0,0 +1,222 @@
+/*
+ * File: include/linux/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _UAPI__LINUX_OMAPFB_H__
+#define _UAPI__LINUX_OMAPFB_H__
+
+#include <linux/fb.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
+#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
+#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
+#define OMAPFB_WAITFORGO	OMAP_IO(60)
+#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
+#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
+#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+#define OMAPFB_MEM_IDX_ENABLED	0x80
+#define OMAPFB_MEM_IDX_MASK	0x7f
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+
+	OMAPFB_COLOR_ARGB16,
+	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
+	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
+	OMAPFB_COLOR_ARGB32,
+	OMAPFB_COLOR_RGBA32,
+	OMAPFB_COLOR_RGBX32,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  mem_idx;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+struct omapfb_memory_read {
+	__u16 x;
+	__u16 y;
+	__u16 w;
+	__u16 h;
+	size_t buffer_size;
+	void __user *buffer;
+};
+
+struct omapfb_ovl_colormode {
+	__u8 overlay_idx;
+	__u8 mode_idx;
+	__u32 bits_per_pixel;
+	__u32 nonstd;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+};
+
+struct omapfb_vram_info {
+	__u32 total;
+	__u32 free;
+	__u32 largest_free_block;
+	__u32 reserved[5];
+};
+
+struct omapfb_tearsync_info {
+	__u8 enabled;
+	__u8 reserved1[3];
+	__u16 line;
+	__u16 reserved2;
+};
+
+struct omapfb_display_info {
+	__u16 xres;
+	__u16 yres;
+	__u32 width;	/* phys width of the display in micrometers */
+	__u32 height;	/* phys height of the display in micrometers */
+	__u32 reserved[5];
+};
+
+
+#endif /* _UAPI__LINUX_OMAPFB_H__ */
diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h
new file mode 100644
index 0000000000000000000000000000000000000000..a49c4afc70600d22ff904586cd41098a9e360e2d
--- /dev/null
+++ b/include/uapi/linux/oom.h
@@ -0,0 +1,11 @@
+#ifndef _UAPI__INCLUDE_LINUX_OOM_H
+#define _UAPI__INCLUDE_LINUX_OOM_H
+
+/*
+ * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
+ * pid.
+ */
+#define OOM_SCORE_ADJ_MIN	(-1000)
+#define OOM_SCORE_ADJ_MAX	1000
+
+#endif /* _UAPI__INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/packet_diag.h b/include/uapi/linux/packet_diag.h
similarity index 100%
rename from include/linux/packet_diag.h
rename to include/uapi/linux/packet_diag.h
diff --git a/include/linux/param.h b/include/uapi/linux/param.h
similarity index 100%
rename from include/linux/param.h
rename to include/uapi/linux/param.h
diff --git a/include/uapi/linux/parport.h b/include/uapi/linux/parport.h
new file mode 100644
index 0000000000000000000000000000000000000000..f41388f88dc361cbbaddaddc46d801c56c0ff3d8
--- /dev/null
+++ b/include/uapi/linux/parport.h
@@ -0,0 +1,95 @@
+/*
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI_PARPORT_H_
+#define _UAPI_PARPORT_H_
+
+/* Start off with user-visible constants */
+
+/* Maximum of 16 ports per machine */
+#define PARPORT_MAX  16
+
+/* Magic numbers */
+#define PARPORT_IRQ_NONE  -1
+#define PARPORT_DMA_NONE  -1
+#define PARPORT_IRQ_AUTO  -2
+#define PARPORT_DMA_AUTO  -2
+#define PARPORT_DMA_NOFIFO -3
+#define PARPORT_DISABLE   -2
+#define PARPORT_IRQ_PROBEONLY -3
+#define PARPORT_IOHI_AUTO -1
+
+#define PARPORT_CONTROL_STROBE    0x1
+#define PARPORT_CONTROL_AUTOFD    0x2
+#define PARPORT_CONTROL_INIT      0x4
+#define PARPORT_CONTROL_SELECT    0x8
+
+#define PARPORT_STATUS_ERROR      0x8
+#define PARPORT_STATUS_SELECT     0x10
+#define PARPORT_STATUS_PAPEROUT   0x20
+#define PARPORT_STATUS_ACK        0x40
+#define PARPORT_STATUS_BUSY       0x80
+
+/* Type classes for Plug-and-Play probe.  */
+typedef enum {
+	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
+	PARPORT_CLASS_PRINTER,
+	PARPORT_CLASS_MODEM,
+	PARPORT_CLASS_NET,
+	PARPORT_CLASS_HDC,              /* Hard disk controller */
+	PARPORT_CLASS_PCMCIA,
+	PARPORT_CLASS_MEDIA,            /* Multimedia device */
+	PARPORT_CLASS_FDC,              /* Floppy disk controller */
+	PARPORT_CLASS_PORTS,
+	PARPORT_CLASS_SCANNER,
+	PARPORT_CLASS_DIGCAM,
+	PARPORT_CLASS_OTHER,            /* Anything else */
+	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
+	PARPORT_CLASS_SCSIADAPTER
+} parport_device_class;
+
+/* The "modes" entry in parport is a bit field representing the
+   capabilities of the hardware. */
+#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
+#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
+#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
+#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
+#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
+#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
+#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
+
+/* IEEE1284 modes: 
+   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
+   'extensibility request' values.  Others are special.
+   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
+#define IEEE1284_MODE_NIBBLE             0
+#define IEEE1284_MODE_BYTE              (1<<0)
+#define IEEE1284_MODE_COMPAT            (1<<8)
+#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
+#define IEEE1284_MODE_ECP               (1<<4)
+#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
+#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
+#define IEEE1284_MODE_EPP               (1<<6)
+#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
+#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
+#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
+#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
+						 * extensibility link to
+						 * be requested, using
+						 * bits 0-6. */
+
+/* For the benefit of parport_read/write, you can use these with
+ * parport_negotiate to use address operations.  They have no effect
+ * other than to make parport_read/write use address transfers. */
+#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
+#define IEEE1284_DATA			 0	/* So is this */
+
+/* Flags for block transfer operations. */
+#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
+#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
+
+/* The rest is for the kernel only */
+#endif /* _UAPI_PARPORT_H_ */
diff --git a/include/uapi/linux/patchkey.h b/include/uapi/linux/patchkey.h
new file mode 100644
index 0000000000000000000000000000000000000000..1bda0e56bc5ebd0df7fa314b41803c3ed3996794
--- /dev/null
+++ b/include/uapi/linux/patchkey.h
@@ -0,0 +1,37 @@
+/*
+ * <linux/patchkey.h> -- definition of _PATCHKEY macro
+ *
+ * Copyright (C) 2005 Stuart Brady
+ *
+ * This exists because awe_voice.h defined its own _PATCHKEY and it wasn't
+ * clear whether removing this would break anything in userspace.
+ *
+ * Do not include this file directly.  Please use <sys/soundcard.h> instead.
+ * For kernel code, use <linux/soundcard.h>
+ */
+
+#ifndef _LINUX_PATCHKEY_H_INDIRECT
+#error "patchkey.h included directly"
+#endif
+
+#ifndef _UAPI_LINUX_PATCHKEY_H
+#define _UAPI_LINUX_PATCHKEY_H
+
+/* Endian macros. */
+#ifndef __KERNEL__
+#  include <endian.h>
+#endif
+
+#if !defined(__KERNEL__)
+#if defined(__BYTE_ORDER)
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#    define _PATCHKEY(id) (0xfd00|id)
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#    define _PATCHKEY(id) ((id<<8)|0x00fd)
+#  else
+#    error "could not determine byte order"
+#  endif
+#endif
+#endif
+
+#endif /* _UAPI_LINUX_PATCHKEY_H */
diff --git a/include/uapi/linux/pci.h b/include/uapi/linux/pci.h
new file mode 100644
index 0000000000000000000000000000000000000000..3c292bc0d1c1781cbdb40d78bf12c1a3444553ec
--- /dev/null
+++ b/include/uapi/linux/pci.h
@@ -0,0 +1,41 @@
+/*
+ *	pci.h
+ *
+ *	PCI defines and function prototypes
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ */
+
+#ifndef _UAPILINUX_PCI_H
+#define _UAPILINUX_PCI_H
+
+#include <linux/pci_regs.h>	/* The pci register defines */
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices.  The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ *	7:3 = slot
+ *	2:0 = function
+ */
+#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn)		((devfn) & 0x07)
+
+/* Ioctls for /proc/bus/pci/X/Y nodes. */
+#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
+#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
+#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
+#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
+#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
+
+#endif /* _UAPILINUX_PCI_H */
diff --git a/include/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
similarity index 100%
rename from include/linux/pci_regs.h
rename to include/uapi/linux/pci_regs.h
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
new file mode 100644
index 0000000000000000000000000000000000000000..4f63c05d27c91d04569971ea4a2c4849203c36a9
--- /dev/null
+++ b/include/uapi/linux/perf_event.h
@@ -0,0 +1,615 @@
+/*
+ * Performance events:
+ *
+ *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
+ *
+ * Data type definitions, declarations, prototypes.
+ *
+ *    Started by: Thomas Gleixner and Ingo Molnar
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+#ifndef _UAPI_LINUX_PERF_EVENT_H
+#define _UAPI_LINUX_PERF_EVENT_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/byteorder.h>
+
+/*
+ * User-space ABI bits:
+ */
+
+/*
+ * attr.type
+ */
+enum perf_type_id {
+	PERF_TYPE_HARDWARE			= 0,
+	PERF_TYPE_SOFTWARE			= 1,
+	PERF_TYPE_TRACEPOINT			= 2,
+	PERF_TYPE_HW_CACHE			= 3,
+	PERF_TYPE_RAW				= 4,
+	PERF_TYPE_BREAKPOINT			= 5,
+
+	PERF_TYPE_MAX,				/* non-ABI */
+};
+
+/*
+ * Generalized performance event event_id types, used by the
+ * attr.event_id parameter of the sys_perf_event_open()
+ * syscall:
+ */
+enum perf_hw_id {
+	/*
+	 * Common hardware events, generalized by the kernel:
+	 */
+	PERF_COUNT_HW_CPU_CYCLES		= 0,
+	PERF_COUNT_HW_INSTRUCTIONS		= 1,
+	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
+	PERF_COUNT_HW_CACHE_MISSES		= 3,
+	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
+	PERF_COUNT_HW_BRANCH_MISSES		= 5,
+	PERF_COUNT_HW_BUS_CYCLES		= 6,
+	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
+	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
+	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
+
+	PERF_COUNT_HW_MAX,			/* non-ABI */
+};
+
+/*
+ * Generalized hardware cache events:
+ *
+ *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
+ *       { read, write, prefetch } x
+ *       { accesses, misses }
+ */
+enum perf_hw_cache_id {
+	PERF_COUNT_HW_CACHE_L1D			= 0,
+	PERF_COUNT_HW_CACHE_L1I			= 1,
+	PERF_COUNT_HW_CACHE_LL			= 2,
+	PERF_COUNT_HW_CACHE_DTLB		= 3,
+	PERF_COUNT_HW_CACHE_ITLB		= 4,
+	PERF_COUNT_HW_CACHE_BPU			= 5,
+	PERF_COUNT_HW_CACHE_NODE		= 6,
+
+	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_id {
+	PERF_COUNT_HW_CACHE_OP_READ		= 0,
+	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
+	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
+
+	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_result_id {
+	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
+	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
+
+	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
+};
+
+/*
+ * Special "software" events provided by the kernel, even if the hardware
+ * does not support performance events. These events measure various
+ * physical and sw events of the kernel (and allow the profiling of them as
+ * well):
+ */
+enum perf_sw_ids {
+	PERF_COUNT_SW_CPU_CLOCK			= 0,
+	PERF_COUNT_SW_TASK_CLOCK		= 1,
+	PERF_COUNT_SW_PAGE_FAULTS		= 2,
+	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
+	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
+	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
+	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
+	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
+	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
+
+	PERF_COUNT_SW_MAX,			/* non-ABI */
+};
+
+/*
+ * Bits that can be set in attr.sample_type to request information
+ * in the overflow packets.
+ */
+enum perf_event_sample_format {
+	PERF_SAMPLE_IP				= 1U << 0,
+	PERF_SAMPLE_TID				= 1U << 1,
+	PERF_SAMPLE_TIME			= 1U << 2,
+	PERF_SAMPLE_ADDR			= 1U << 3,
+	PERF_SAMPLE_READ			= 1U << 4,
+	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
+	PERF_SAMPLE_ID				= 1U << 6,
+	PERF_SAMPLE_CPU				= 1U << 7,
+	PERF_SAMPLE_PERIOD			= 1U << 8,
+	PERF_SAMPLE_STREAM_ID			= 1U << 9,
+	PERF_SAMPLE_RAW				= 1U << 10,
+	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
+	PERF_SAMPLE_REGS_USER			= 1U << 12,
+	PERF_SAMPLE_STACK_USER			= 1U << 13,
+
+	PERF_SAMPLE_MAX = 1U << 14,		/* non-ABI */
+};
+
+/*
+ * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
+ *
+ * If the user does not pass priv level information via branch_sample_type,
+ * the kernel uses the event's priv level. Branch and event priv levels do
+ * not have to match. Branch priv level is checked for permissions.
+ *
+ * The branch types can be combined, however BRANCH_ANY covers all types
+ * of branches and therefore it supersedes all the other types.
+ */
+enum perf_branch_sample_type {
+	PERF_SAMPLE_BRANCH_USER		= 1U << 0, /* user branches */
+	PERF_SAMPLE_BRANCH_KERNEL	= 1U << 1, /* kernel branches */
+	PERF_SAMPLE_BRANCH_HV		= 1U << 2, /* hypervisor branches */
+
+	PERF_SAMPLE_BRANCH_ANY		= 1U << 3, /* any branch types */
+	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << 4, /* any call branch */
+	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << 5, /* any return branch */
+	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << 6, /* indirect calls */
+
+	PERF_SAMPLE_BRANCH_MAX		= 1U << 7, /* non-ABI */
+};
+
+#define PERF_SAMPLE_BRANCH_PLM_ALL \
+	(PERF_SAMPLE_BRANCH_USER|\
+	 PERF_SAMPLE_BRANCH_KERNEL|\
+	 PERF_SAMPLE_BRANCH_HV)
+
+/*
+ * Values to determine ABI of the registers dump.
+ */
+enum perf_sample_regs_abi {
+	PERF_SAMPLE_REGS_ABI_NONE	= 0,
+	PERF_SAMPLE_REGS_ABI_32		= 1,
+	PERF_SAMPLE_REGS_ABI_64		= 2,
+};
+
+/*
+ * The format of the data returned by read() on a perf event fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ *	{ u64		value;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		id;           } && PERF_FORMAT_ID
+ *	} && !PERF_FORMAT_GROUP
+ *
+ *	{ u64		nr;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		value;
+ *	    { u64	id;           } && PERF_FORMAT_ID
+ *	  }		cntr[nr];
+ *	} && PERF_FORMAT_GROUP
+ * };
+ */
+enum perf_event_read_format {
+	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
+	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
+	PERF_FORMAT_ID				= 1U << 2,
+	PERF_FORMAT_GROUP			= 1U << 3,
+
+	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
+};
+
+#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
+#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
+#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
+#define PERF_ATTR_SIZE_VER3	96	/* add: sample_regs_user */
+					/* add: sample_stack_user */
+
+/*
+ * Hardware event_id to monitor via a performance monitoring event:
+ */
+struct perf_event_attr {
+
+	/*
+	 * Major type: hardware/software/tracepoint/etc.
+	 */
+	__u32			type;
+
+	/*
+	 * Size of the attr structure, for fwd/bwd compat.
+	 */
+	__u32			size;
+
+	/*
+	 * Type specific configuration information.
+	 */
+	__u64			config;
+
+	union {
+		__u64		sample_period;
+		__u64		sample_freq;
+	};
+
+	__u64			sample_type;
+	__u64			read_format;
+
+	__u64			disabled       :  1, /* off by default        */
+				inherit	       :  1, /* children inherit it   */
+				pinned	       :  1, /* must always be on PMU */
+				exclusive      :  1, /* only group on PMU     */
+				exclude_user   :  1, /* don't count user      */
+				exclude_kernel :  1, /* ditto kernel          */
+				exclude_hv     :  1, /* ditto hypervisor      */
+				exclude_idle   :  1, /* don't count when idle */
+				mmap           :  1, /* include mmap data     */
+				comm	       :  1, /* include comm data     */
+				freq           :  1, /* use freq, not period  */
+				inherit_stat   :  1, /* per task counts       */
+				enable_on_exec :  1, /* next exec enables     */
+				task           :  1, /* trace fork/exit       */
+				watermark      :  1, /* wakeup_watermark      */
+				/*
+				 * precise_ip:
+				 *
+				 *  0 - SAMPLE_IP can have arbitrary skid
+				 *  1 - SAMPLE_IP must have constant skid
+				 *  2 - SAMPLE_IP requested to have 0 skid
+				 *  3 - SAMPLE_IP must have 0 skid
+				 *
+				 *  See also PERF_RECORD_MISC_EXACT_IP
+				 */
+				precise_ip     :  2, /* skid constraint       */
+				mmap_data      :  1, /* non-exec mmap data    */
+				sample_id_all  :  1, /* sample_type all events */
+
+				exclude_host   :  1, /* don't count in host   */
+				exclude_guest  :  1, /* don't count in guest  */
+
+				exclude_callchain_kernel : 1, /* exclude kernel callchains */
+				exclude_callchain_user   : 1, /* exclude user callchains */
+
+				__reserved_1   : 41;
+
+	union {
+		__u32		wakeup_events;	  /* wakeup every n events */
+		__u32		wakeup_watermark; /* bytes before wakeup   */
+	};
+
+	__u32			bp_type;
+	union {
+		__u64		bp_addr;
+		__u64		config1; /* extension of config */
+	};
+	union {
+		__u64		bp_len;
+		__u64		config2; /* extension of config1 */
+	};
+	__u64	branch_sample_type; /* enum perf_branch_sample_type */
+
+	/*
+	 * Defines set of user regs to dump on samples.
+	 * See asm/perf_regs.h for details.
+	 */
+	__u64	sample_regs_user;
+
+	/*
+	 * Defines size of the user stack to dump on samples.
+	 */
+	__u32	sample_stack_user;
+
+	/* Align to u64. */
+	__u32	__reserved_2;
+};
+
+#define perf_flags(attr)	(*(&(attr)->read_format + 1))
+
+/*
+ * Ioctls that can be done on a perf event fd:
+ */
+#define PERF_EVENT_IOC_ENABLE		_IO ('$', 0)
+#define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
+#define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
+#define PERF_EVENT_IOC_RESET		_IO ('$', 3)
+#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
+#define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
+#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
+
+enum perf_event_ioc_flags {
+	PERF_IOC_FLAG_GROUP		= 1U << 0,
+};
+
+/*
+ * Structure of the page that can be mapped via mmap
+ */
+struct perf_event_mmap_page {
+	__u32	version;		/* version number of this structure */
+	__u32	compat_version;		/* lowest version this is compat with */
+
+	/*
+	 * Bits needed to read the hw events in user-space.
+	 *
+	 *   u32 seq, time_mult, time_shift, idx, width;
+	 *   u64 count, enabled, running;
+	 *   u64 cyc, time_offset;
+	 *   s64 pmc = 0;
+	 *
+	 *   do {
+	 *     seq = pc->lock;
+	 *     barrier()
+	 *
+	 *     enabled = pc->time_enabled;
+	 *     running = pc->time_running;
+	 *
+	 *     if (pc->cap_usr_time && enabled != running) {
+	 *       cyc = rdtsc();
+	 *       time_offset = pc->time_offset;
+	 *       time_mult   = pc->time_mult;
+	 *       time_shift  = pc->time_shift;
+	 *     }
+	 *
+	 *     idx = pc->index;
+	 *     count = pc->offset;
+	 *     if (pc->cap_usr_rdpmc && idx) {
+	 *       width = pc->pmc_width;
+	 *       pmc = rdpmc(idx - 1);
+	 *     }
+	 *
+	 *     barrier();
+	 *   } while (pc->lock != seq);
+	 *
+	 * NOTE: for obvious reason this only works on self-monitoring
+	 *       processes.
+	 */
+	__u32	lock;			/* seqlock for synchronization */
+	__u32	index;			/* hardware event identifier */
+	__s64	offset;			/* add to hardware event value */
+	__u64	time_enabled;		/* time event active */
+	__u64	time_running;		/* time event on cpu */
+	union {
+		__u64	capabilities;
+		__u64	cap_usr_time  : 1,
+			cap_usr_rdpmc : 1,
+			cap_____res   : 62;
+	};
+
+	/*
+	 * If cap_usr_rdpmc this field provides the bit-width of the value
+	 * read using the rdpmc() or equivalent instruction. This can be used
+	 * to sign extend the result like:
+	 *
+	 *   pmc <<= 64 - width;
+	 *   pmc >>= 64 - width; // signed shift right
+	 *   count += pmc;
+	 */
+	__u16	pmc_width;
+
+	/*
+	 * If cap_usr_time the below fields can be used to compute the time
+	 * delta since time_enabled (in ns) using rdtsc or similar.
+	 *
+	 *   u64 quot, rem;
+	 *   u64 delta;
+	 *
+	 *   quot = (cyc >> time_shift);
+	 *   rem = cyc & ((1 << time_shift) - 1);
+	 *   delta = time_offset + quot * time_mult +
+	 *              ((rem * time_mult) >> time_shift);
+	 *
+	 * Where time_offset,time_mult,time_shift and cyc are read in the
+	 * seqcount loop described above. This delta can then be added to
+	 * enabled and possible running (if idx), improving the scaling:
+	 *
+	 *   enabled += delta;
+	 *   if (idx)
+	 *     running += delta;
+	 *
+	 *   quot = count / running;
+	 *   rem  = count % running;
+	 *   count = quot * enabled + (rem * enabled) / running;
+	 */
+	__u16	time_shift;
+	__u32	time_mult;
+	__u64	time_offset;
+
+		/*
+		 * Hole for extension of the self monitor capabilities
+		 */
+
+	__u64	__reserved[120];	/* align to 1k */
+
+	/*
+	 * Control data for the mmap() data buffer.
+	 *
+	 * User-space reading the @data_head value should issue an rmb(), on
+	 * SMP capable platforms, after reading this value -- see
+	 * perf_event_wakeup().
+	 *
+	 * When the mapping is PROT_WRITE the @data_tail value should be
+	 * written by userspace to reflect the last read data. In this case
+	 * the kernel will not over-write unread data.
+	 */
+	__u64   data_head;		/* head in the data section */
+	__u64	data_tail;		/* user-space written tail */
+};
+
+#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
+#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
+#define PERF_RECORD_MISC_KERNEL			(1 << 0)
+#define PERF_RECORD_MISC_USER			(2 << 0)
+#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
+#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
+#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
+
+/*
+ * Indicates that the content of PERF_SAMPLE_IP points to
+ * the actual instruction that triggered the event. See also
+ * perf_event_attr::precise_ip.
+ */
+#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
+/*
+ * Reserve the last bit to indicate some extended misc field
+ */
+#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
+
+struct perf_event_header {
+	__u32	type;
+	__u16	misc;
+	__u16	size;
+};
+
+enum perf_event_type {
+
+	/*
+	 * If perf_event_attr.sample_id_all is set then all event types will
+	 * have the sample_type selected fields related to where/when
+	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
+	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
+	 * the perf_event_header and the fields already present for the existing
+	 * fields, i.e. at the end of the payload. That way a newer perf.data
+	 * file will be supported by older perf tools, with these new optional
+	 * fields being ignored.
+	 *
+	 * The MMAP events record the PROT_EXEC mappings so that we can
+	 * correlate userspace IPs to code. They have the following structure:
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	u64				addr;
+	 *	u64				len;
+	 *	u64				pgoff;
+	 *	char				filename[];
+	 * };
+	 */
+	PERF_RECORD_MMAP			= 1,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				id;
+	 *	u64				lost;
+	 * };
+	 */
+	PERF_RECORD_LOST			= 2,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	char				comm[];
+	 * };
+	 */
+	PERF_RECORD_COMM			= 3,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * };
+	 */
+	PERF_RECORD_EXIT			= 4,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				time;
+	 *	u64				id;
+	 *	u64				stream_id;
+	 * };
+	 */
+	PERF_RECORD_THROTTLE			= 5,
+	PERF_RECORD_UNTHROTTLE			= 6,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * };
+	 */
+	PERF_RECORD_FORK			= 7,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, tid;
+	 *
+	 *	struct read_format		values;
+	 * };
+	 */
+	PERF_RECORD_READ			= 8,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
+	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
+	 *	{ u64			time;     } && PERF_SAMPLE_TIME
+	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
+	 *	{ u64			id;	  } && PERF_SAMPLE_ID
+	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
+	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
+	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
+	 *
+	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
+	 *
+	 *	{ u64			nr,
+	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
+	 *
+	 *	#
+	 *	# The RAW record below is opaque data wrt the ABI
+	 *	#
+	 *	# That is, the ABI doesn't make any promises wrt to
+	 *	# the stability of its content, it may vary depending
+	 *	# on event, hardware, kernel version and phase of
+	 *	# the moon.
+	 *	#
+	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
+	 *	#
+	 *
+	 *	{ u32			size;
+	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
+	 *
+	 *	{ u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
+	 *
+	 * 	{ u64			abi; # enum perf_sample_regs_abi
+	 * 	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
+	 *
+	 * 	{ u64			size;
+	 * 	  char			data[size];
+	 * 	  u64			dyn_size; } && PERF_SAMPLE_STACK_USER
+	 * };
+	 */
+	PERF_RECORD_SAMPLE			= 9,
+
+	PERF_RECORD_MAX,			/* non-ABI */
+};
+
+#define PERF_MAX_STACK_DEPTH		127
+
+enum perf_callchain_context {
+	PERF_CONTEXT_HV			= (__u64)-32,
+	PERF_CONTEXT_KERNEL		= (__u64)-128,
+	PERF_CONTEXT_USER		= (__u64)-512,
+
+	PERF_CONTEXT_GUEST		= (__u64)-2048,
+	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
+	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
+
+	PERF_CONTEXT_MAX		= (__u64)-4095,
+};
+
+#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
+#define PERF_FLAG_FD_OUTPUT		(1U << 1)
+#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
+
+#endif /* _UAPI_LINUX_PERF_EVENT_H */
diff --git a/include/uapi/linux/personality.h b/include/uapi/linux/personality.h
new file mode 100644
index 0000000000000000000000000000000000000000..aa169c4339d20de36472c84f6ba3a4732b2276e6
--- /dev/null
+++ b/include/uapi/linux/personality.h
@@ -0,0 +1,69 @@
+#ifndef _UAPI_LINUX_PERSONALITY_H
+#define _UAPI_LINUX_PERSONALITY_H
+
+
+/*
+ * Flags for bug emulation.
+ *
+ * These occupy the top three bytes.
+ */
+enum {
+	UNAME26	=               0x0020000,
+	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
+	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
+						 * (signal handling)
+						 */
+	MMAP_PAGE_ZERO =	0x0100000,
+	ADDR_COMPAT_LAYOUT =	0x0200000,
+	READ_IMPLIES_EXEC =	0x0400000,
+	ADDR_LIMIT_32BIT =	0x0800000,
+	SHORT_INODE =		0x1000000,
+	WHOLE_SECONDS =		0x2000000,
+	STICKY_TIMEOUTS	=	0x4000000,
+	ADDR_LIMIT_3GB = 	0x8000000,
+};
+
+/*
+ * Security-relevant compatibility flags that must be
+ * cleared upon setuid or setgid exec:
+ */
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
+			    ADDR_NO_RANDOMIZE  | \
+			    ADDR_COMPAT_LAYOUT | \
+			    MMAP_PAGE_ZERO)
+
+/*
+ * Personality types.
+ *
+ * These go in the low byte.  Avoid using the top bit, it will
+ * conflict with error returns.
+ */
+enum {
+	PER_LINUX =		0x0000,
+	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
+	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
+	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
+					 WHOLE_SECONDS | SHORT_INODE,
+	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
+	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
+	PER_BSD =		0x0006,
+	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
+	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_LINUX32 =		0x0008,
+	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
+	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
+	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
+	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
+	PER_RISCOS =		0x000c,
+	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
+	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
+	PER_HPUX =		0x0010,
+	PER_MASK =		0x00ff,
+};
+
+
+#endif /* _UAPI_LINUX_PERSONALITY_H */
diff --git a/include/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h
similarity index 100%
rename from include/linux/pfkeyv2.h
rename to include/uapi/linux/pfkeyv2.h
diff --git a/include/linux/pg.h b/include/uapi/linux/pg.h
similarity index 100%
rename from include/linux/pg.h
rename to include/uapi/linux/pg.h
diff --git a/include/linux/phantom.h b/include/uapi/linux/phantom.h
similarity index 100%
rename from include/linux/phantom.h
rename to include/uapi/linux/phantom.h
diff --git a/include/uapi/linux/phonet.h b/include/uapi/linux/phonet.h
new file mode 100644
index 0000000000000000000000000000000000000000..a3e1d65b3ed90d48b50b7d4e734fb788f6004f0a
--- /dev/null
+++ b/include/uapi/linux/phonet.h
@@ -0,0 +1,185 @@
+/**
+ * file phonet.h
+ *
+ * Phonet sockets kernel interface
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _UAPILINUX_PHONET_H
+#define _UAPILINUX_PHONET_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Automatic protocol selection */
+#define PN_PROTO_TRANSPORT	0
+/* Phonet datagram socket */
+#define PN_PROTO_PHONET		1
+/* Phonet pipe */
+#define PN_PROTO_PIPE		2
+#define PHONET_NPROTO		3
+
+/* Socket options for SOL_PNPIPE level */
+#define PNPIPE_ENCAP		1
+#define PNPIPE_IFINDEX		2
+#define PNPIPE_HANDLE		3
+#define PNPIPE_INITSTATE	4
+
+#define PNADDR_ANY		0
+#define PNADDR_BROADCAST	0xFC
+#define PNPORT_RESOURCE_ROUTING	0
+
+/* Values for PNPIPE_ENCAP option */
+#define PNPIPE_ENCAP_NONE	0
+#define PNPIPE_ENCAP_IP		1
+
+/* ioctls */
+#define SIOCPNGETOBJECT		(SIOCPROTOPRIVATE + 0)
+#define SIOCPNENABLEPIPE	(SIOCPROTOPRIVATE + 13)
+#define SIOCPNADDRESOURCE	(SIOCPROTOPRIVATE + 14)
+#define SIOCPNDELRESOURCE	(SIOCPROTOPRIVATE + 15)
+
+/* Phonet protocol header */
+struct phonethdr {
+	__u8	pn_rdev;
+	__u8	pn_sdev;
+	__u8	pn_res;
+	__be16	pn_length;
+	__u8	pn_robj;
+	__u8	pn_sobj;
+} __attribute__((packed));
+
+/* Common Phonet payload header */
+struct phonetmsg {
+	__u8	pn_trans_id;	/* transaction ID */
+	__u8	pn_msg_id;	/* message type */
+	union {
+		struct {
+			__u8	pn_submsg_id;	/* message subtype */
+			__u8	pn_data[5];
+		} base;
+		struct {
+			__u16	pn_e_res_id;	/* extended resource ID */
+			__u8	pn_e_submsg_id;	/* message subtype */
+			__u8	pn_e_data[3];
+		} ext;
+	} pn_msg_u;
+};
+#define PN_COMMON_MESSAGE	0xF0
+#define PN_COMMGR		0x10
+#define PN_PREFIX		0xE0 /* resource for extended messages */
+#define pn_submsg_id		pn_msg_u.base.pn_submsg_id
+#define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
+#define pn_e_res_id		pn_msg_u.ext.pn_e_res_id
+#define pn_data			pn_msg_u.base.pn_data
+#define pn_e_data		pn_msg_u.ext.pn_e_data
+
+/* data for unreachable errors */
+#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP	0x01
+#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP	0x14
+#define pn_orig_msg_id		pn_data[0]
+#define pn_status		pn_data[1]
+#define pn_e_orig_msg_id	pn_e_data[0]
+#define pn_e_status		pn_e_data[1]
+
+/* Phonet socket address structure */
+struct sockaddr_pn {
+	__kernel_sa_family_t spn_family;
+	__u8 spn_obj;
+	__u8 spn_dev;
+	__u8 spn_resource;
+	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
+} __attribute__((packed));
+
+/* Well known address */
+#define PN_DEV_PC	0x10
+
+static inline __u16 pn_object(__u8 addr, __u16 port)
+{
+	return (addr << 8) | (port & 0x3ff);
+}
+
+static inline __u8 pn_obj(__u16 handle)
+{
+	return handle & 0xff;
+}
+
+static inline __u8 pn_dev(__u16 handle)
+{
+	return handle >> 8;
+}
+
+static inline __u16 pn_port(__u16 handle)
+{
+	return handle & 0x3ff;
+}
+
+static inline __u8 pn_addr(__u16 handle)
+{
+	return (handle >> 8) & 0xfc;
+}
+
+static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
+{
+	spn->spn_dev &= 0x03;
+	spn->spn_dev |= addr & 0xfc;
+}
+
+static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
+{
+	spn->spn_dev &= 0xfc;
+	spn->spn_dev |= (port >> 8) & 0x03;
+	spn->spn_obj = port & 0xff;
+}
+
+static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
+						__u16 handle)
+{
+	spn->spn_dev = pn_dev(handle);
+	spn->spn_obj = pn_obj(handle);
+}
+
+static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
+						__u8 resource)
+{
+	spn->spn_resource = resource;
+}
+
+static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
+{
+	return spn->spn_dev & 0xfc;
+}
+
+static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
+{
+	return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
+}
+
+static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
+{
+	return pn_object(spn->spn_dev, spn->spn_obj);
+}
+
+static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
+{
+	return spn->spn_resource;
+}
+
+/* Phonet device ioctl requests */
+
+#endif /* _UAPILINUX_PHONET_H */
diff --git a/include/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
similarity index 100%
rename from include/linux/pkt_cls.h
rename to include/uapi/linux/pkt_cls.h
diff --git a/include/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
similarity index 100%
rename from include/linux/pkt_sched.h
rename to include/uapi/linux/pkt_sched.h
diff --git a/include/uapi/linux/pktcdvd.h b/include/uapi/linux/pktcdvd.h
new file mode 100644
index 0000000000000000000000000000000000000000..2640b9d4e2430a43c98237511effe70f1d08eb95
--- /dev/null
+++ b/include/uapi/linux/pktcdvd.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2000 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and
+ * DVD-RW devices.
+ *
+ */
+#ifndef _UAPI__PKTCDVD_H
+#define _UAPI__PKTCDVD_H
+
+#include <linux/types.h>
+
+/*
+ * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
+ */
+#define PACKET_DEBUG		1
+
+#define	MAX_WRITERS		8
+
+#define PKT_RB_POOL_SIZE	512
+
+/*
+ * How long we should hold a non-full packet before starting data gathering.
+ */
+#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
+
+/*
+ * use drive write caching -- we need deferred error handling to be
+ * able to successfully recover with this option (drive will return good
+ * status as soon as the cdb is validated).
+ */
+#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
+#define USE_WCACHING		1
+#else
+#define USE_WCACHING		0
+#endif
+
+/*
+ * No user-servicable parts beyond this point ->
+ */
+
+/*
+ * device types
+ */
+#define PACKET_CDR		1
+#define	PACKET_CDRW		2
+#define PACKET_DVDR		3
+#define PACKET_DVDRW		4
+
+/*
+ * flags
+ */
+#define PACKET_WRITABLE		1	/* pd is writable */
+#define PACKET_NWA_VALID	2	/* next writable address valid */
+#define PACKET_LRA_VALID	3	/* last recorded address valid */
+#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
+					/* underlying cdrom device happy */
+
+/*
+ * Disc status -- from READ_DISC_INFO
+ */
+#define PACKET_DISC_EMPTY	0
+#define PACKET_DISC_INCOMPLETE	1
+#define PACKET_DISC_COMPLETE	2
+#define PACKET_DISC_OTHER	3
+
+/*
+ * write type, and corresponding data block type
+ */
+#define PACKET_MODE1		1
+#define PACKET_MODE2		2
+#define PACKET_BLOCK_MODE1	8
+#define PACKET_BLOCK_MODE2	10
+
+/*
+ * Last session/border status
+ */
+#define PACKET_SESSION_EMPTY		0
+#define PACKET_SESSION_INCOMPLETE	1
+#define PACKET_SESSION_RESERVED		2
+#define PACKET_SESSION_COMPLETE		3
+
+#define PACKET_MCN			"4a656e734178626f65323030300000"
+
+#undef PACKET_USE_LS
+
+#define PKT_CTRL_CMD_SETUP	0
+#define PKT_CTRL_CMD_TEARDOWN	1
+#define PKT_CTRL_CMD_STATUS	2
+
+struct pkt_ctrl_command {
+	__u32 command;				/* in: Setup, teardown, status */
+	__u32 dev_index;			/* in/out: Device index */
+	__u32 dev;				/* in/out: Device nr for cdrw device */
+	__u32 pkt_dev;				/* in/out: Device nr for packet device */
+	__u32 num_devices;			/* out: Largest device index + 1 */
+	__u32 padding;				/* Not used */
+};
+
+/*
+ * packet ioctls
+ */
+#define PACKET_IOCTL_MAGIC	('X')
+#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
+
+
+#endif /* _UAPI__PKTCDVD_H */
diff --git a/include/uapi/linux/pmu.h b/include/uapi/linux/pmu.h
new file mode 100644
index 0000000000000000000000000000000000000000..caead364b6eb3aa651838504cce93d2256d696ba
--- /dev/null
+++ b/include/uapi/linux/pmu.h
@@ -0,0 +1,139 @@
+/*
+ * Definitions for talking to the PMU.  The PMU is a microcontroller
+ * which controls battery charging and system power on PowerBook 3400
+ * and 2400 models as well as the RTC and various other things.
+ *
+ * Copyright (C) 1998 Paul Mackerras.
+ */
+
+#ifndef _UAPI_LINUX_PMU_H
+#define _UAPI_LINUX_PMU_H
+
+#define PMU_DRIVER_VERSION	2
+
+/*
+ * PMU commands
+ */
+#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
+#define PMU_POWER_CTRL		0x11	/* control power of some devices */
+#define PMU_ADB_CMD		0x20	/* send ADB packet */
+#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
+#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
+#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
+#define PMU_SET_RTC		0x30	/* set real-time clock */
+#define PMU_READ_RTC		0x38	/* read real-time clock */
+#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
+#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
+#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
+#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
+#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
+#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
+#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
+#define PMU_INT_ACK		0x78	/* read interrupt bits */
+#define PMU_SHUTDOWN		0x7e	/* turn power off */
+#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
+#define PMU_SLEEP		0x7f	/* put CPU to sleep */
+#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
+#define PMU_I2C_CMD		0x9a	/* I2C operations */
+#define PMU_RESET		0xd0	/* reset CPU */
+#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
+#define PMU_GET_COVER		0xdc	/* report cover open/closed */
+#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
+#define PMU_GET_VERSION		0xea	/* read the PMU version */
+
+/* Bits to use with the PMU_POWER_CTRL0 command */
+#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
+
+/* Bits to use with the PMU_POWER_CTRL command */
+#define PMU_POW_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
+#define PMU_POW_CHARGER		0x02	/* battery charger power */
+#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
+#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
+
+/* Bits in PMU interrupt and interrupt mask bytes */
+#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
+#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
+#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
+#define PMU_INT_BATTERY		0x20	/* Battery state change */
+#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
+#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
+
+/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
+#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
+#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
+#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
+
+/* Bits in the environement message (either obtained via PMU_GET_COVER,
+ * or via PMU_INT_ENVIRONMENT on core99 */
+#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
+
+/* I2C related definitions */
+#define PMU_I2C_MODE_SIMPLE	0
+#define PMU_I2C_MODE_STDSUB	1
+#define PMU_I2C_MODE_COMBINED	2
+
+#define PMU_I2C_BUS_STATUS	0
+#define PMU_I2C_BUS_SYSCLK	1
+#define PMU_I2C_BUS_POWER	2
+
+#define PMU_I2C_STATUS_OK	0
+#define PMU_I2C_STATUS_DATAREAD	1
+#define PMU_I2C_STATUS_BUSY	0xfe
+
+
+/* Kind of PMU (model) */
+enum {
+	PMU_UNKNOWN,
+	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
+	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
+	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
+	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
+	PMU_68K_V1,		/* 68K PMU, version 1 */
+	PMU_68K_V2, 		/* 68K PMU, version 2 */
+};
+
+/* PMU PMU_POWER_EVENTS commands */
+enum {
+	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
+	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
+	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
+	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
+	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
+	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
+};
+
+/* Power events wakeup bits */
+enum {
+	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
+	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
+	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
+	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
+	PMU_PWR_WAKEUP_RING		= 0x10,
+};
+	
+/*
+ * Ioctl commands for the /dev/pmu device
+ */
+#include <linux/ioctl.h>
+
+/* no param */
+#define PMU_IOC_SLEEP		_IO('B', 0)
+/* out param: u32*	backlight value: 0 to 15 */
+#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
+/* in param: u32	backlight value: 0 to 15 */
+#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
+/* out param: u32*	PMU model */
+#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
+/* out param: u32*	has_adb: 0 or 1 */
+#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
+/* out param: u32*	can_sleep: 0 or 1 */
+#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
+/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
+#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
+
+
+#endif /* _UAPI_LINUX_PMU_H */
diff --git a/include/uapi/linux/poll.h b/include/uapi/linux/poll.h
new file mode 100644
index 0000000000000000000000000000000000000000..2001fedfb223f99e1ae5758bc42d8074dd4fd611
--- /dev/null
+++ b/include/uapi/linux/poll.h
@@ -0,0 +1 @@
+#include <asm/poll.h>
diff --git a/include/linux/posix_types.h b/include/uapi/linux/posix_types.h
similarity index 100%
rename from include/linux/posix_types.h
rename to include/uapi/linux/posix_types.h
diff --git a/include/linux/ppdev.h b/include/uapi/linux/ppdev.h
similarity index 100%
rename from include/linux/ppdev.h
rename to include/uapi/linux/ppdev.h
diff --git a/include/uapi/linux/ppp-comp.h b/include/uapi/linux/ppp-comp.h
new file mode 100644
index 0000000000000000000000000000000000000000..0a15bbb04e195d54db56bc3cbf3128913b2b3c1c
--- /dev/null
+++ b/include/uapi/linux/ppp-comp.h
@@ -0,0 +1,93 @@
+/*
+ * ppp-comp.h - Definitions for doing PPP packet compression.
+ *
+ * Copyright 1994-1998 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#ifndef _UAPI_NET_PPP_COMP_H
+#define _UAPI_NET_PPP_COMP_H
+
+
+/*
+ * CCP codes.
+ */
+
+#define CCP_CONFREQ	1
+#define CCP_CONFACK	2
+#define CCP_TERMREQ	5
+#define CCP_TERMACK	6
+#define CCP_RESETREQ	14
+#define CCP_RESETACK	15
+
+/*
+ * Max # bytes for a CCP option
+ */
+
+#define CCP_MAX_OPTION_LENGTH	32
+
+/*
+ * Parts of a CCP packet.
+ */
+
+#define CCP_CODE(dp)		((dp)[0])
+#define CCP_ID(dp)		((dp)[1])
+#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
+#define CCP_HDRLEN		4
+
+#define CCP_OPT_CODE(dp)	((dp)[0])
+#define CCP_OPT_LENGTH(dp)	((dp)[1])
+#define CCP_OPT_MINLEN		2
+
+/*
+ * Definitions for BSD-Compress.
+ */
+
+#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
+#define CILEN_BSD_COMPRESS	3	/* length of config. option */
+
+/* Macros for handling the 3rd byte of the BSD-Compress config option. */
+#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
+#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
+#define BSD_CURRENT_VERSION	1		/* current version number */
+#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
+
+#define BSD_MIN_BITS		9	/* smallest code size supported */
+#define BSD_MAX_BITS		15	/* largest code size supported */
+
+/*
+ * Definitions for Deflate.
+ */
+
+#define CI_DEFLATE		26	/* config option for Deflate */
+#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
+#define CILEN_DEFLATE		4	/* length of its config option */
+
+#define DEFLATE_MIN_SIZE	9
+#define DEFLATE_MAX_SIZE	15
+#define DEFLATE_METHOD_VAL	8
+#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
+#define DEFLATE_METHOD(x)	((x) & 0x0F)
+#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
+#define DEFLATE_CHK_SEQUENCE	0
+
+/*
+ * Definitions for MPPE.
+ */
+
+#define CI_MPPE                18      /* config option for MPPE */
+#define CILEN_MPPE              6      /* length of config option */
+
+/*
+ * Definitions for other, as yet unsupported, compression methods.
+ */
+
+#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
+#define CILEN_PREDICTOR_1	2	/* length of its config option */
+#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
+#define CILEN_PREDICTOR_2	2	/* length of its config option */
+
+
+#endif /* _UAPI_NET_PPP_COMP_H */
diff --git a/include/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h
similarity index 100%
rename from include/linux/ppp-ioctl.h
rename to include/uapi/linux/ppp-ioctl.h
diff --git a/include/uapi/linux/ppp_defs.h b/include/uapi/linux/ppp_defs.h
new file mode 100644
index 0000000000000000000000000000000000000000..283fc05dbbda9eb0a0a99baa8d36197a16c030a2
--- /dev/null
+++ b/include/uapi/linux/ppp_defs.h
@@ -0,0 +1,150 @@
+/*
+ * ppp_defs.h - PPP definitions.
+ *
+ * Copyright 1994-2000 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+
+#ifndef _UAPI_PPP_DEFS_H_
+#define _UAPI_PPP_DEFS_H_
+
+/*
+ * The basic PPP frame.
+ */
+#define PPP_HDRLEN	4	/* octets for standard ppp header */
+#define PPP_FCSLEN	2	/* octets for FCS */
+#define PPP_MRU		1500	/* default MRU = max length of info field */
+
+#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
+#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
+#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
+
+/*
+ * Significant octet values.
+ */
+#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
+#define	PPP_UI		0x03	/* Unnumbered Information */
+#define	PPP_FLAG	0x7e	/* Flag Sequence */
+#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
+#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
+
+/*
+ * Protocol field values.
+ */
+#define PPP_IP		0x21	/* Internet Protocol */
+#define PPP_AT		0x29	/* AppleTalk Protocol */
+#define PPP_IPX		0x2b	/* IPX protocol */
+#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
+#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
+#define PPP_MP		0x3d	/* Multilink protocol */
+#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
+#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
+#define PPP_COMP	0xfd	/* compressed packet */
+#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
+#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
+#define PPP_IPCP	0x8021	/* IP Control Protocol */
+#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
+#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
+#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
+#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
+#define PPP_CCP		0x80fd	/* Compression Control Protocol */
+#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
+#define PPP_LCP		0xc021	/* Link Control Protocol */
+#define PPP_PAP		0xc023	/* Password Authentication Protocol */
+#define PPP_LQR		0xc025	/* Link Quality Report protocol */
+#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
+#define PPP_CBCP	0xc029	/* Callback Control Protocol */
+
+/*
+ * Values for FCS calculations.
+ */
+
+#define PPP_INITFCS	0xffff	/* Initial FCS value */
+#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
+
+
+/*
+ * Extended asyncmap - allows any character to be escaped.
+ */
+
+typedef __u32		ext_accm[8];
+
+/*
+ * What to do with network protocol (NP) packets.
+ */
+enum NPmode {
+    NPMODE_PASS,		/* pass the packet through */
+    NPMODE_DROP,		/* silently drop the packet */
+    NPMODE_ERROR,		/* return an error */
+    NPMODE_QUEUE		/* save it up for later. */
+};
+
+/*
+ * Statistics for LQRP and pppstats
+ */
+struct pppstat	{
+    __u32	ppp_discards;	/* # frames discarded */
+
+    __u32	ppp_ibytes;	/* bytes received */
+    __u32	ppp_ioctects;	/* bytes received not in error */
+    __u32	ppp_ipackets;	/* packets received */
+    __u32	ppp_ierrors;	/* receive errors */
+    __u32	ppp_ilqrs;	/* # LQR frames received */
+
+    __u32	ppp_obytes;	/* raw bytes sent */
+    __u32	ppp_ooctects;	/* frame bytes sent */
+    __u32	ppp_opackets;	/* packets sent */
+    __u32	ppp_oerrors;	/* transmit errors */ 
+    __u32	ppp_olqrs;	/* # LQR frames sent */
+};
+
+struct vjstat {
+    __u32	vjs_packets;	/* outbound packets */
+    __u32	vjs_compressed;	/* outbound compressed packets */
+    __u32	vjs_searches;	/* searches for connection state */
+    __u32	vjs_misses;	/* times couldn't find conn. state */
+    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
+    __u32	vjs_compressedin;   /* inbound compressed packets */
+    __u32	vjs_errorin;	/* inbound unknown type packets */
+    __u32	vjs_tossed;	/* inbound packets tossed because of error */
+};
+
+struct compstat {
+    __u32	unc_bytes;	/* total uncompressed bytes */
+    __u32	unc_packets;	/* total uncompressed packets */
+    __u32	comp_bytes;	/* compressed bytes */
+    __u32	comp_packets;	/* compressed packets */
+    __u32	inc_bytes;	/* incompressible bytes */
+    __u32	inc_packets;	/* incompressible packets */
+
+    /* the compression ratio is defined as in_count / bytes_out */
+    __u32       in_count;	/* Bytes received */
+    __u32       bytes_out;	/* Bytes transmitted */
+
+    double	ratio;		/* not computed in kernel. */
+};
+
+struct ppp_stats {
+    struct pppstat	p;	/* basic PPP statistics */
+    struct vjstat	vj;	/* VJ header compression statistics */
+};
+
+struct ppp_comp_stats {
+    struct compstat	c;	/* packet compression statistics */
+    struct compstat	d;	/* packet decompression statistics */
+};
+
+/*
+ * The following structure records the time in seconds since
+ * the last NP packet was sent or received.
+ */
+struct ppp_idle {
+    __kernel_time_t xmit_idle;	/* time since last NP packet sent */
+    __kernel_time_t recv_idle;	/* time since last NP packet received */
+};
+
+#endif /* _UAPI_PPP_DEFS_H_ */
diff --git a/include/linux/pps.h b/include/uapi/linux/pps.h
similarity index 100%
rename from include/linux/pps.h
rename to include/uapi/linux/pps.h
diff --git a/include/linux/prctl.h b/include/uapi/linux/prctl.h
similarity index 100%
rename from include/linux/prctl.h
rename to include/uapi/linux/prctl.h
diff --git a/include/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h
similarity index 100%
rename from include/linux/ptp_clock.h
rename to include/uapi/linux/ptp_clock.h
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
new file mode 100644
index 0000000000000000000000000000000000000000..1ef6c056a9e435640aa7c25ec4a72f2ed4af0c2e
--- /dev/null
+++ b/include/uapi/linux/ptrace.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_LINUX_PTRACE_H
+#define _UAPI_LINUX_PTRACE_H
+/* ptrace.h */
+/* structs and defines to help the user use the ptrace system call. */
+
+/* has the defines to get at the registers. */
+
+
+#define PTRACE_TRACEME		   0
+#define PTRACE_PEEKTEXT		   1
+#define PTRACE_PEEKDATA		   2
+#define PTRACE_PEEKUSR		   3
+#define PTRACE_POKETEXT		   4
+#define PTRACE_POKEDATA		   5
+#define PTRACE_POKEUSR		   6
+#define PTRACE_CONT		   7
+#define PTRACE_KILL		   8
+#define PTRACE_SINGLESTEP	   9
+
+#define PTRACE_ATTACH		  16
+#define PTRACE_DETACH		  17
+
+#define PTRACE_SYSCALL		  24
+
+/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
+#define PTRACE_SETOPTIONS	0x4200
+#define PTRACE_GETEVENTMSG	0x4201
+#define PTRACE_GETSIGINFO	0x4202
+#define PTRACE_SETSIGINFO	0x4203
+
+/*
+ * Generic ptrace interface that exports the architecture specific regsets
+ * using the corresponding NT_* types (which are also used in the core dump).
+ * Please note that the NT_PRSTATUS note type in a core dump contains a full
+ * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
+ * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
+ * other user_regset flavors, the user_regset layout and the ELF core dump note
+ * payload are exactly the same layout.
+ *
+ * This interface usage is as follows:
+ *	struct iovec iov = { buf, len};
+ *
+ *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
+ *
+ * On the successful completion, iov.len will be updated by the kernel,
+ * specifying how much the kernel has written/read to/from the user's iov.buf.
+ */
+#define PTRACE_GETREGSET	0x4204
+#define PTRACE_SETREGSET	0x4205
+
+#define PTRACE_SEIZE		0x4206
+#define PTRACE_INTERRUPT	0x4207
+#define PTRACE_LISTEN		0x4208
+
+/* Wait extended result codes for the above trace options.  */
+#define PTRACE_EVENT_FORK	1
+#define PTRACE_EVENT_VFORK	2
+#define PTRACE_EVENT_CLONE	3
+#define PTRACE_EVENT_EXEC	4
+#define PTRACE_EVENT_VFORK_DONE	5
+#define PTRACE_EVENT_EXIT	6
+#define PTRACE_EVENT_SECCOMP	7
+/* Extended result codes which enabled by means other than options.  */
+#define PTRACE_EVENT_STOP	128
+
+/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
+#define PTRACE_O_TRACESYSGOOD	1
+#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
+#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
+#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
+#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
+#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
+#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
+#define PTRACE_O_TRACESECCOMP	(1 << PTRACE_EVENT_SECCOMP)
+
+#define PTRACE_O_MASK		0x000000ff
+
+#include <asm/ptrace.h>
+
+
+#endif /* _UAPI_LINUX_PTRACE_H */
diff --git a/include/linux/qnx4_fs.h b/include/uapi/linux/qnx4_fs.h
similarity index 100%
rename from include/linux/qnx4_fs.h
rename to include/uapi/linux/qnx4_fs.h
diff --git a/include/linux/qnxtypes.h b/include/uapi/linux/qnxtypes.h
similarity index 100%
rename from include/linux/qnxtypes.h
rename to include/uapi/linux/qnxtypes.h
diff --git a/include/uapi/linux/quota.h b/include/uapi/linux/quota.h
new file mode 100644
index 0000000000000000000000000000000000000000..3b6cfbeb086d87c8812931490ad70ddcd7f98b95
--- /dev/null
+++ b/include/uapi/linux/quota.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 1982, 1986 Regents of the University of California.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Robert Elz at The University of Melbourne.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _UAPI_LINUX_QUOTA_
+#define _UAPI_LINUX_QUOTA_
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#define __DQUOT_VERSION__	"dquot_6.5.2"
+
+#define MAXQUOTAS 2
+#define USRQUOTA  0		/* element used for user quotas */
+#define GRPQUOTA  1		/* element used for group quotas */
+
+/*
+ * Definitions for the default names of the quotas files.
+ */
+#define INITQFNAMES { \
+	"user",    /* USRQUOTA */ \
+	"group",   /* GRPQUOTA */ \
+	"undefined", \
+};
+
+/*
+ * Command definitions for the 'quotactl' system call.
+ * The commands are broken into a main command defined below
+ * and a subcommand that is used to convey the type of
+ * quota that is being manipulated (see above).
+ */
+#define SUBCMDMASK  0x00ff
+#define SUBCMDSHIFT 8
+#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
+
+#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
+#define Q_QUOTAON  0x800002	/* turn quotas on */
+#define Q_QUOTAOFF 0x800003	/* turn quotas off */
+#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
+#define Q_GETINFO  0x800005	/* get information about quota files */
+#define Q_SETINFO  0x800006	/* set information about quota files */
+#define Q_GETQUOTA 0x800007	/* get user quota structure */
+#define Q_SETQUOTA 0x800008	/* set user quota structure */
+
+/* Quota format type IDs */
+#define	QFMT_VFS_OLD 1
+#define	QFMT_VFS_V0 2
+#define QFMT_OCFS2 3
+#define	QFMT_VFS_V1 4
+
+/* Size of block in which space limits are passed through the quota
+ * interface */
+#define QIF_DQBLKSIZE_BITS 10
+#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
+
+/*
+ * Quota structure used for communication with userspace via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+enum {
+	QIF_BLIMITS_B = 0,
+	QIF_SPACE_B,
+	QIF_ILIMITS_B,
+	QIF_INODES_B,
+	QIF_BTIME_B,
+	QIF_ITIME_B,
+};
+
+#define QIF_BLIMITS	(1 << QIF_BLIMITS_B)
+#define QIF_SPACE	(1 << QIF_SPACE_B)
+#define QIF_ILIMITS	(1 << QIF_ILIMITS_B)
+#define QIF_INODES	(1 << QIF_INODES_B)
+#define QIF_BTIME	(1 << QIF_BTIME_B)
+#define QIF_ITIME	(1 << QIF_ITIME_B)
+#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
+#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
+#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
+#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
+
+struct if_dqblk {
+	__u64 dqb_bhardlimit;
+	__u64 dqb_bsoftlimit;
+	__u64 dqb_curspace;
+	__u64 dqb_ihardlimit;
+	__u64 dqb_isoftlimit;
+	__u64 dqb_curinodes;
+	__u64 dqb_btime;
+	__u64 dqb_itime;
+	__u32 dqb_valid;
+};
+
+/*
+ * Structure used for setting quota information about file via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+#define IIF_BGRACE	1
+#define IIF_IGRACE	2
+#define IIF_FLAGS	4
+#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
+
+struct if_dqinfo {
+	__u64 dqi_bgrace;
+	__u64 dqi_igrace;
+	__u32 dqi_flags;
+	__u32 dqi_valid;
+};
+
+/*
+ * Definitions for quota netlink interface
+ */
+#define QUOTA_NL_NOWARN 0
+#define QUOTA_NL_IHARDWARN 1		/* Inode hardlimit reached */
+#define QUOTA_NL_ISOFTLONGWARN 2 	/* Inode grace time expired */
+#define QUOTA_NL_ISOFTWARN 3		/* Inode softlimit reached */
+#define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
+#define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
+#define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
+#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
+#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
+#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
+#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
+
+enum {
+	QUOTA_NL_C_UNSPEC,
+	QUOTA_NL_C_WARNING,
+	__QUOTA_NL_C_MAX,
+};
+#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
+
+enum {
+	QUOTA_NL_A_UNSPEC,
+	QUOTA_NL_A_QTYPE,
+	QUOTA_NL_A_EXCESS_ID,
+	QUOTA_NL_A_WARNING,
+	QUOTA_NL_A_DEV_MAJOR,
+	QUOTA_NL_A_DEV_MINOR,
+	QUOTA_NL_A_CAUSED_ID,
+	__QUOTA_NL_A_MAX,
+};
+#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
+
+
+#endif /* _UAPI_LINUX_QUOTA_ */
diff --git a/include/linux/radeonfb.h b/include/uapi/linux/radeonfb.h
similarity index 100%
rename from include/linux/radeonfb.h
rename to include/uapi/linux/radeonfb.h
diff --git a/include/uapi/linux/random.h b/include/uapi/linux/random.h
new file mode 100644
index 0000000000000000000000000000000000000000..7471b5b3b8baa6ce7be4815744ad9ecaec6c1c4d
--- /dev/null
+++ b/include/uapi/linux/random.h
@@ -0,0 +1,50 @@
+/*
+ * include/linux/random.h
+ *
+ * Include file for the random number generator.
+ */
+
+#ifndef _UAPI_LINUX_RANDOM_H
+#define _UAPI_LINUX_RANDOM_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/irqnr.h>
+
+/* ioctl()'s for the random number generator */
+
+/* Get the entropy count. */
+#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
+
+/* Add to (or subtract from) the entropy count.  (Superuser only.) */
+#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
+
+/* Get the contents of the entropy pool.  (Superuser only.) */
+#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
+
+/* 
+ * Write bytes into the entropy pool and add to the entropy count.
+ * (Superuser only.)
+ */
+#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
+
+/* Clear entropy count to 0.  (Superuser only.) */
+#define RNDZAPENTCNT	_IO( 'R', 0x04 )
+
+/* Clear the entropy pool and associated counters.  (Superuser only.) */
+#define RNDCLEARPOOL	_IO( 'R', 0x06 )
+
+struct rand_pool_info {
+	int	entropy_count;
+	int	buf_size;
+	__u32	buf[0];
+};
+
+struct rnd_state {
+	__u32 s1, s2, s3;
+};
+
+/* Exported functions */
+
+
+#endif /* _UAPI_LINUX_RANDOM_H */
diff --git a/include/linux/raw.h b/include/uapi/linux/raw.h
similarity index 100%
rename from include/linux/raw.h
rename to include/uapi/linux/raw.h
diff --git a/include/linux/rds.h b/include/uapi/linux/rds.h
similarity index 100%
rename from include/linux/rds.h
rename to include/uapi/linux/rds.h
diff --git a/include/uapi/linux/reboot.h b/include/uapi/linux/reboot.h
new file mode 100644
index 0000000000000000000000000000000000000000..09d056d4fc50609329bfcb880238d4fe57b9478d
--- /dev/null
+++ b/include/uapi/linux/reboot.h
@@ -0,0 +1,39 @@
+#ifndef _UAPI_LINUX_REBOOT_H
+#define _UAPI_LINUX_REBOOT_H
+
+/*
+ * Magic values required to use _reboot() system call.
+ */
+
+#define	LINUX_REBOOT_MAGIC1	0xfee1dead
+#define	LINUX_REBOOT_MAGIC2	672274793
+#define	LINUX_REBOOT_MAGIC2A	85072278
+#define	LINUX_REBOOT_MAGIC2B	369367448
+#define	LINUX_REBOOT_MAGIC2C	537993216
+
+
+/*
+ * Commands accepted by the _reboot() system call.
+ *
+ * RESTART     Restart system using default command and mode.
+ * HALT        Stop OS and give system control to ROM monitor, if any.
+ * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
+ * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
+ * POWER_OFF   Stop OS and remove all power from system, if possible.
+ * RESTART2    Restart system using given command string.
+ * SW_SUSPEND  Suspend system using software suspend if compiled in.
+ * KEXEC       Restart system using a previously loaded Linux kernel
+ */
+
+#define	LINUX_REBOOT_CMD_RESTART	0x01234567
+#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
+#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
+#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
+#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
+#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
+#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
+#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
+
+
+
+#endif /* _UAPI_LINUX_REBOOT_H */
diff --git a/include/linux/reiserfs_fs.h b/include/uapi/linux/reiserfs_fs.h
similarity index 100%
rename from include/linux/reiserfs_fs.h
rename to include/uapi/linux/reiserfs_fs.h
diff --git a/include/linux/reiserfs_xattr.h b/include/uapi/linux/reiserfs_xattr.h
similarity index 100%
rename from include/linux/reiserfs_xattr.h
rename to include/uapi/linux/reiserfs_xattr.h
diff --git a/include/uapi/linux/resource.h b/include/uapi/linux/resource.h
new file mode 100644
index 0000000000000000000000000000000000000000..e0ed28477f48fa5fb05e50a8f65aaf8dd636ddb3
--- /dev/null
+++ b/include/uapi/linux/resource.h
@@ -0,0 +1,80 @@
+#ifndef _UAPI_LINUX_RESOURCE_H
+#define _UAPI_LINUX_RESOURCE_H
+
+#include <linux/time.h>
+#include <linux/types.h>
+
+/*
+ * Resource control/accounting header file for linux
+ */
+
+/*
+ * Definition of struct rusage taken from BSD 4.3 Reno
+ * 
+ * We don't support all of these yet, but we might as well have them....
+ * Otherwise, each time we add new items, programs which depend on this
+ * structure will lose.  This reduces the chances of that happening.
+ */
+#define	RUSAGE_SELF	0
+#define	RUSAGE_CHILDREN	(-1)
+#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
+#define	RUSAGE_THREAD	1		/* only the calling thread */
+
+struct	rusage {
+	struct timeval ru_utime;	/* user time used */
+	struct timeval ru_stime;	/* system time used */
+	long	ru_maxrss;		/* maximum resident set size */
+	long	ru_ixrss;		/* integral shared memory size */
+	long	ru_idrss;		/* integral unshared data size */
+	long	ru_isrss;		/* integral unshared stack size */
+	long	ru_minflt;		/* page reclaims */
+	long	ru_majflt;		/* page faults */
+	long	ru_nswap;		/* swaps */
+	long	ru_inblock;		/* block input operations */
+	long	ru_oublock;		/* block output operations */
+	long	ru_msgsnd;		/* messages sent */
+	long	ru_msgrcv;		/* messages received */
+	long	ru_nsignals;		/* signals received */
+	long	ru_nvcsw;		/* voluntary context switches */
+	long	ru_nivcsw;		/* involuntary " */
+};
+
+struct rlimit {
+	unsigned long	rlim_cur;
+	unsigned long	rlim_max;
+};
+
+#define RLIM64_INFINITY		(~0ULL)
+
+struct rlimit64 {
+	__u64 rlim_cur;
+	__u64 rlim_max;
+};
+
+#define	PRIO_MIN	(-20)
+#define	PRIO_MAX	20
+
+#define	PRIO_PROCESS	0
+#define	PRIO_PGRP	1
+#define	PRIO_USER	2
+
+/*
+ * Limit the stack by to some sane default: root can always
+ * increase this limit if needed..  8MB seems reasonable.
+ */
+#define _STK_LIM	(8*1024*1024)
+
+/*
+ * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
+ * and other sensitive information are never written to disk.
+ */
+#define MLOCK_LIMIT	((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
+
+/*
+ * Due to binary compatibility, the actual resource numbers
+ * may be different for different linux versions..
+ */
+#include <asm/resource.h>
+
+
+#endif /* _UAPI_LINUX_RESOURCE_H */
diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h
new file mode 100644
index 0000000000000000000000000000000000000000..2753c6cc97405fe44965501e4d050c5272d1db67
--- /dev/null
+++ b/include/uapi/linux/rfkill.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _UAPI__RFKILL_H
+#define _UAPI__RFKILL_H
+
+
+#include <linux/types.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED	0
+#define RFKILL_STATE_UNBLOCKED		1
+#define RFKILL_STATE_HARD_BLOCKED	2
+
+/**
+ * enum rfkill_type - type of rfkill switch.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
+ */
+enum rfkill_type {
+	RFKILL_TYPE_ALL = 0,
+	RFKILL_TYPE_WLAN,
+	RFKILL_TYPE_BLUETOOTH,
+	RFKILL_TYPE_UWB,
+	RFKILL_TYPE_WIMAX,
+	RFKILL_TYPE_WWAN,
+	RFKILL_TYPE_GPS,
+	RFKILL_TYPE_FM,
+	NUM_RFKILL_TYPES,
+};
+
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+	RFKILL_OP_ADD = 0,
+	RFKILL_OP_DEL,
+	RFKILL_OP_CHANGE,
+	RFKILL_OP_CHANGE_ALL,
+};
+
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft, hard;
+} __attribute__((packed));
+
+/*
+ * We are planning to be backward and forward compatible with changes
+ * to the event struct, by adding new, optional, members at the end.
+ * When reading an event (whether the kernel from userspace or vice
+ * versa) we need to accept anything that's at least as large as the
+ * version 1 event size, but might be able to accept other sizes in
+ * the future.
+ *
+ * One exception is the kernel -- we already have two event sizes in
+ * that we've made the 'hard' member optional since our only option
+ * is to ignore it anyway.
+ */
+#define RFKILL_EVENT_SIZE_V1	8
+
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC	'R'
+#define RFKILL_IOC_NOINPUT	1
+#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+
+#endif /* _UAPI__RFKILL_H */
diff --git a/include/linux/romfs_fs.h b/include/uapi/linux/romfs_fs.h
similarity index 100%
rename from include/linux/romfs_fs.h
rename to include/uapi/linux/romfs_fs.h
diff --git a/include/linux/rose.h b/include/uapi/linux/rose.h
similarity index 100%
rename from include/linux/rose.h
rename to include/uapi/linux/rose.h
diff --git a/include/linux/route.h b/include/uapi/linux/route.h
similarity index 100%
rename from include/linux/route.h
rename to include/uapi/linux/route.h
diff --git a/include/uapi/linux/rtc.h b/include/uapi/linux/rtc.h
new file mode 100644
index 0000000000000000000000000000000000000000..f8c82e6f25d5d0413f470c346f0cf4f1ec141780
--- /dev/null
+++ b/include/uapi/linux/rtc.h
@@ -0,0 +1,107 @@
+/*
+ * Generic RTC interface.
+ * This version contains the part of the user interface to the Real Time Clock
+ * service. It is used with both the legacy mc146818 and also  EFI
+ * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
+ * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
+ */
+#ifndef _UAPI_LINUX_RTC_H_
+#define _UAPI_LINUX_RTC_H_
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+
+struct rtc_time {
+	int tm_sec;
+	int tm_min;
+	int tm_hour;
+	int tm_mday;
+	int tm_mon;
+	int tm_year;
+	int tm_wday;
+	int tm_yday;
+	int tm_isdst;
+};
+
+/*
+ * This data structure is inspired by the EFI (v0.92) wakeup
+ * alarm API.
+ */
+struct rtc_wkalrm {
+	unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
+	unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
+	struct rtc_time time;	/* time the alarm is set to */
+};
+
+/*
+ * Data structure to control PLL correction some better RTC feature
+ * pll_value is used to get or set current value of correction,
+ * the rest of the struct is used to query HW capabilities.
+ * This is modeled after the RTC used in Q40/Q60 computers but
+ * should be sufficiently flexible for other devices
+ *
+ * +ve pll_value means clock will run faster by
+ *   pll_value*pll_posmult/pll_clock
+ * -ve pll_value means clock will run slower by
+ *   pll_value*pll_negmult/pll_clock
+ */
+
+struct rtc_pll_info {
+	int pll_ctrl;       /* placeholder for fancier control */
+	int pll_value;      /* get/set correction value */
+	int pll_max;        /* max +ve (faster) adjustment value */
+	int pll_min;        /* max -ve (slower) adjustment value */
+	int pll_posmult;    /* factor for +ve correction */
+	int pll_negmult;    /* factor for -ve correction */
+	long pll_clock;     /* base PLL frequency */
+};
+
+/*
+ * ioctl calls that are permitted to the /dev/rtc interface, if
+ * any of the RTC drivers are enabled.
+ */
+
+#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
+#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
+#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
+#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
+#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
+#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
+#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
+#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
+
+#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
+#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
+#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
+#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
+#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
+#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
+#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
+#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
+
+#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
+#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
+
+#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
+#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
+
+#define RTC_VL_READ	_IOR('p', 0x13, int)	/* Voltage low detector */
+#define RTC_VL_CLR	_IO('p', 0x14)		/* Clear voltage low information */
+
+/* interrupt flags */
+#define RTC_IRQF 0x80	/* Any of the following is active */
+#define RTC_PF 0x40	/* Periodic interrupt */
+#define RTC_AF 0x20	/* Alarm interrupt */
+#define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
+
+
+#define RTC_MAX_FREQ	8192
+
+
+#endif /* _UAPI_LINUX_RTC_H_ */
diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
new file mode 100644
index 0000000000000000000000000000000000000000..fcd768b09f6e898fdccc64dda92d4ac289d58fdd
--- /dev/null
+++ b/include/uapi/linux/rtnetlink.h
@@ -0,0 +1,612 @@
+#ifndef _UAPI__LINUX_RTNETLINK_H
+#define _UAPI__LINUX_RTNETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+#include <linux/if_link.h>
+#include <linux/if_addr.h>
+#include <linux/neighbour.h>
+
+/* rtnetlink families. Values up to 127 are reserved for real address
+ * families, values above 128 may be used arbitrarily.
+ */
+#define RTNL_FAMILY_IPMR		128
+#define RTNL_FAMILY_IP6MR		129
+#define RTNL_FAMILY_MAX			129
+
+/****
+ *		Routing/neighbour discovery messages.
+ ****/
+
+/* Types of messages */
+
+enum {
+	RTM_BASE	= 16,
+#define RTM_BASE	RTM_BASE
+
+	RTM_NEWLINK	= 16,
+#define RTM_NEWLINK	RTM_NEWLINK
+	RTM_DELLINK,
+#define RTM_DELLINK	RTM_DELLINK
+	RTM_GETLINK,
+#define RTM_GETLINK	RTM_GETLINK
+	RTM_SETLINK,
+#define RTM_SETLINK	RTM_SETLINK
+
+	RTM_NEWADDR	= 20,
+#define RTM_NEWADDR	RTM_NEWADDR
+	RTM_DELADDR,
+#define RTM_DELADDR	RTM_DELADDR
+	RTM_GETADDR,
+#define RTM_GETADDR	RTM_GETADDR
+
+	RTM_NEWROUTE	= 24,
+#define RTM_NEWROUTE	RTM_NEWROUTE
+	RTM_DELROUTE,
+#define RTM_DELROUTE	RTM_DELROUTE
+	RTM_GETROUTE,
+#define RTM_GETROUTE	RTM_GETROUTE
+
+	RTM_NEWNEIGH	= 28,
+#define RTM_NEWNEIGH	RTM_NEWNEIGH
+	RTM_DELNEIGH,
+#define RTM_DELNEIGH	RTM_DELNEIGH
+	RTM_GETNEIGH,
+#define RTM_GETNEIGH	RTM_GETNEIGH
+
+	RTM_NEWRULE	= 32,
+#define RTM_NEWRULE	RTM_NEWRULE
+	RTM_DELRULE,
+#define RTM_DELRULE	RTM_DELRULE
+	RTM_GETRULE,
+#define RTM_GETRULE	RTM_GETRULE
+
+	RTM_NEWQDISC	= 36,
+#define RTM_NEWQDISC	RTM_NEWQDISC
+	RTM_DELQDISC,
+#define RTM_DELQDISC	RTM_DELQDISC
+	RTM_GETQDISC,
+#define RTM_GETQDISC	RTM_GETQDISC
+
+	RTM_NEWTCLASS	= 40,
+#define RTM_NEWTCLASS	RTM_NEWTCLASS
+	RTM_DELTCLASS,
+#define RTM_DELTCLASS	RTM_DELTCLASS
+	RTM_GETTCLASS,
+#define RTM_GETTCLASS	RTM_GETTCLASS
+
+	RTM_NEWTFILTER	= 44,
+#define RTM_NEWTFILTER	RTM_NEWTFILTER
+	RTM_DELTFILTER,
+#define RTM_DELTFILTER	RTM_DELTFILTER
+	RTM_GETTFILTER,
+#define RTM_GETTFILTER	RTM_GETTFILTER
+
+	RTM_NEWACTION	= 48,
+#define RTM_NEWACTION   RTM_NEWACTION
+	RTM_DELACTION,
+#define RTM_DELACTION   RTM_DELACTION
+	RTM_GETACTION,
+#define RTM_GETACTION   RTM_GETACTION
+
+	RTM_NEWPREFIX	= 52,
+#define RTM_NEWPREFIX	RTM_NEWPREFIX
+
+	RTM_GETMULTICAST = 58,
+#define RTM_GETMULTICAST RTM_GETMULTICAST
+
+	RTM_GETANYCAST	= 62,
+#define RTM_GETANYCAST	RTM_GETANYCAST
+
+	RTM_NEWNEIGHTBL	= 64,
+#define RTM_NEWNEIGHTBL	RTM_NEWNEIGHTBL
+	RTM_GETNEIGHTBL	= 66,
+#define RTM_GETNEIGHTBL	RTM_GETNEIGHTBL
+	RTM_SETNEIGHTBL,
+#define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
+
+	RTM_NEWNDUSEROPT = 68,
+#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
+
+	RTM_NEWADDRLABEL = 72,
+#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
+	RTM_DELADDRLABEL,
+#define RTM_DELADDRLABEL RTM_DELADDRLABEL
+	RTM_GETADDRLABEL,
+#define RTM_GETADDRLABEL RTM_GETADDRLABEL
+
+	RTM_GETDCB = 78,
+#define RTM_GETDCB RTM_GETDCB
+	RTM_SETDCB,
+#define RTM_SETDCB RTM_SETDCB
+
+	__RTM_MAX,
+#define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
+};
+
+#define RTM_NR_MSGTYPES	(RTM_MAX + 1 - RTM_BASE)
+#define RTM_NR_FAMILIES	(RTM_NR_MSGTYPES >> 2)
+#define RTM_FAM(cmd)	(((cmd) - RTM_BASE) >> 2)
+
+/* 
+   Generic structure for encapsulation of optional route information.
+   It is reminiscent of sockaddr, but with sa_family replaced
+   with attribute type.
+ */
+
+struct rtattr {
+	unsigned short	rta_len;
+	unsigned short	rta_type;
+};
+
+/* Macros to handle rtattributes */
+
+#define RTA_ALIGNTO	4
+#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
+#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
+			 (rta)->rta_len >= sizeof(struct rtattr) && \
+			 (rta)->rta_len <= (len))
+#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
+				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
+#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
+#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
+#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
+#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
+
+
+
+
+/******************************************************************************
+ *		Definitions used in routing table administration.
+ ****/
+
+struct rtmsg {
+	unsigned char		rtm_family;
+	unsigned char		rtm_dst_len;
+	unsigned char		rtm_src_len;
+	unsigned char		rtm_tos;
+
+	unsigned char		rtm_table;	/* Routing table id */
+	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
+	unsigned char		rtm_scope;	/* See below */	
+	unsigned char		rtm_type;	/* See below	*/
+
+	unsigned		rtm_flags;
+};
+
+/* rtm_type */
+
+enum {
+	RTN_UNSPEC,
+	RTN_UNICAST,		/* Gateway or direct route	*/
+	RTN_LOCAL,		/* Accept locally		*/
+	RTN_BROADCAST,		/* Accept locally as broadcast,
+				   send as broadcast */
+	RTN_ANYCAST,		/* Accept locally as broadcast,
+				   but send as unicast */
+	RTN_MULTICAST,		/* Multicast route		*/
+	RTN_BLACKHOLE,		/* Drop				*/
+	RTN_UNREACHABLE,	/* Destination is unreachable   */
+	RTN_PROHIBIT,		/* Administratively prohibited	*/
+	RTN_THROW,		/* Not in this table		*/
+	RTN_NAT,		/* Translate this address	*/
+	RTN_XRESOLVE,		/* Use external resolver	*/
+	__RTN_MAX
+};
+
+#define RTN_MAX (__RTN_MAX - 1)
+
+
+/* rtm_protocol */
+
+#define RTPROT_UNSPEC	0
+#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
+				   not used by current IPv4 */
+#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
+#define RTPROT_BOOT	3	/* Route installed during boot		*/
+#define RTPROT_STATIC	4	/* Route installed by administrator	*/
+
+/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
+   they are just passed from user and back as is.
+   It will be used by hypothetical multiple routing daemons.
+   Note that protocol values should be standardized in order to
+   avoid conflicts.
+ */
+
+#define RTPROT_GATED	8	/* Apparently, GateD */
+#define RTPROT_RA	9	/* RDISC/ND router advertisements */
+#define RTPROT_MRT	10	/* Merit MRT */
+#define RTPROT_ZEBRA	11	/* Zebra */
+#define RTPROT_BIRD	12	/* BIRD */
+#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
+#define RTPROT_XORP	14	/* XORP */
+#define RTPROT_NTK	15	/* Netsukuku */
+#define RTPROT_DHCP	16      /* DHCP client */
+
+/* rtm_scope
+
+   Really it is not scope, but sort of distance to the destination.
+   NOWHERE are reserved for not existing destinations, HOST is our
+   local addresses, LINK are destinations, located on directly attached
+   link and UNIVERSE is everywhere in the Universe.
+
+   Intermediate values are also possible f.e. interior routes
+   could be assigned a value between UNIVERSE and LINK.
+*/
+
+enum rt_scope_t {
+	RT_SCOPE_UNIVERSE=0,
+/* User defined values  */
+	RT_SCOPE_SITE=200,
+	RT_SCOPE_LINK=253,
+	RT_SCOPE_HOST=254,
+	RT_SCOPE_NOWHERE=255
+};
+
+/* rtm_flags */
+
+#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
+#define RTM_F_CLONED		0x200	/* This route is cloned		*/
+#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
+#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
+
+/* Reserved table identifiers */
+
+enum rt_class_t {
+	RT_TABLE_UNSPEC=0,
+/* User defined values */
+	RT_TABLE_COMPAT=252,
+	RT_TABLE_DEFAULT=253,
+	RT_TABLE_MAIN=254,
+	RT_TABLE_LOCAL=255,
+	RT_TABLE_MAX=0xFFFFFFFF
+};
+
+
+/* Routing message attributes */
+
+enum rtattr_type_t {
+	RTA_UNSPEC,
+	RTA_DST,
+	RTA_SRC,
+	RTA_IIF,
+	RTA_OIF,
+	RTA_GATEWAY,
+	RTA_PRIORITY,
+	RTA_PREFSRC,
+	RTA_METRICS,
+	RTA_MULTIPATH,
+	RTA_PROTOINFO, /* no longer used */
+	RTA_FLOW,
+	RTA_CACHEINFO,
+	RTA_SESSION, /* no longer used */
+	RTA_MP_ALGO, /* no longer used */
+	RTA_TABLE,
+	RTA_MARK,
+	__RTA_MAX
+};
+
+#define RTA_MAX (__RTA_MAX - 1)
+
+#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
+#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
+
+/* RTM_MULTIPATH --- array of struct rtnexthop.
+ *
+ * "struct rtnexthop" describes all necessary nexthop information,
+ * i.e. parameters of path to a destination via this nexthop.
+ *
+ * At the moment it is impossible to set different prefsrc, mtu, window
+ * and rtt for different paths from multipath.
+ */
+
+struct rtnexthop {
+	unsigned short		rtnh_len;
+	unsigned char		rtnh_flags;
+	unsigned char		rtnh_hops;
+	int			rtnh_ifindex;
+};
+
+/* rtnh_flags */
+
+#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
+#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
+#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
+
+/* Macros to handle hexthops */
+
+#define RTNH_ALIGNTO	4
+#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
+#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
+			   ((int)(rtnh)->rtnh_len) <= (len))
+#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
+#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
+#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
+#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
+
+/* RTM_CACHEINFO */
+
+struct rta_cacheinfo {
+	__u32	rta_clntref;
+	__u32	rta_lastuse;
+	__s32	rta_expires;
+	__u32	rta_error;
+	__u32	rta_used;
+
+#define RTNETLINK_HAVE_PEERINFO 1
+	__u32	rta_id;
+	__u32	rta_ts;
+	__u32	rta_tsage;
+};
+
+/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
+
+enum {
+	RTAX_UNSPEC,
+#define RTAX_UNSPEC RTAX_UNSPEC
+	RTAX_LOCK,
+#define RTAX_LOCK RTAX_LOCK
+	RTAX_MTU,
+#define RTAX_MTU RTAX_MTU
+	RTAX_WINDOW,
+#define RTAX_WINDOW RTAX_WINDOW
+	RTAX_RTT,
+#define RTAX_RTT RTAX_RTT
+	RTAX_RTTVAR,
+#define RTAX_RTTVAR RTAX_RTTVAR
+	RTAX_SSTHRESH,
+#define RTAX_SSTHRESH RTAX_SSTHRESH
+	RTAX_CWND,
+#define RTAX_CWND RTAX_CWND
+	RTAX_ADVMSS,
+#define RTAX_ADVMSS RTAX_ADVMSS
+	RTAX_REORDERING,
+#define RTAX_REORDERING RTAX_REORDERING
+	RTAX_HOPLIMIT,
+#define RTAX_HOPLIMIT RTAX_HOPLIMIT
+	RTAX_INITCWND,
+#define RTAX_INITCWND RTAX_INITCWND
+	RTAX_FEATURES,
+#define RTAX_FEATURES RTAX_FEATURES
+	RTAX_RTO_MIN,
+#define RTAX_RTO_MIN RTAX_RTO_MIN
+	RTAX_INITRWND,
+#define RTAX_INITRWND RTAX_INITRWND
+	__RTAX_MAX
+};
+
+#define RTAX_MAX (__RTAX_MAX - 1)
+
+#define RTAX_FEATURE_ECN	0x00000001
+#define RTAX_FEATURE_SACK	0x00000002
+#define RTAX_FEATURE_TIMESTAMP	0x00000004
+#define RTAX_FEATURE_ALLFRAG	0x00000008
+
+struct rta_session {
+	__u8	proto;
+	__u8	pad1;
+	__u16	pad2;
+
+	union {
+		struct {
+			__u16	sport;
+			__u16	dport;
+		} ports;
+
+		struct {
+			__u8	type;
+			__u8	code;
+			__u16	ident;
+		} icmpt;
+
+		__u32		spi;
+	} u;
+};
+
+/****
+ *		General form of address family dependent message.
+ ****/
+
+struct rtgenmsg {
+	unsigned char		rtgen_family;
+};
+
+/*****************************************************************
+ *		Link layer specific messages.
+ ****/
+
+/* struct ifinfomsg
+ * passes link level specific information, not dependent
+ * on network protocol.
+ */
+
+struct ifinfomsg {
+	unsigned char	ifi_family;
+	unsigned char	__ifi_pad;
+	unsigned short	ifi_type;		/* ARPHRD_* */
+	int		ifi_index;		/* Link index	*/
+	unsigned	ifi_flags;		/* IFF_* flags	*/
+	unsigned	ifi_change;		/* IFF_* change mask */
+};
+
+/********************************************************************
+ *		prefix information 
+ ****/
+
+struct prefixmsg {
+	unsigned char	prefix_family;
+	unsigned char	prefix_pad1;
+	unsigned short	prefix_pad2;
+	int		prefix_ifindex;
+	unsigned char	prefix_type;
+	unsigned char	prefix_len;
+	unsigned char	prefix_flags;
+	unsigned char	prefix_pad3;
+};
+
+enum 
+{
+	PREFIX_UNSPEC,
+	PREFIX_ADDRESS,
+	PREFIX_CACHEINFO,
+	__PREFIX_MAX
+};
+
+#define PREFIX_MAX	(__PREFIX_MAX - 1)
+
+struct prefix_cacheinfo {
+	__u32	preferred_time;
+	__u32	valid_time;
+};
+
+
+/*****************************************************************
+ *		Traffic control messages.
+ ****/
+
+struct tcmsg {
+	unsigned char	tcm_family;
+	unsigned char	tcm__pad1;
+	unsigned short	tcm__pad2;
+	int		tcm_ifindex;
+	__u32		tcm_handle;
+	__u32		tcm_parent;
+	__u32		tcm_info;
+};
+
+enum {
+	TCA_UNSPEC,
+	TCA_KIND,
+	TCA_OPTIONS,
+	TCA_STATS,
+	TCA_XSTATS,
+	TCA_RATE,
+	TCA_FCNT,
+	TCA_STATS2,
+	TCA_STAB,
+	__TCA_MAX
+};
+
+#define TCA_MAX (__TCA_MAX - 1)
+
+#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
+#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
+
+/********************************************************************
+ *		Neighbor Discovery userland options
+ ****/
+
+struct nduseroptmsg {
+	unsigned char	nduseropt_family;
+	unsigned char	nduseropt_pad1;
+	unsigned short	nduseropt_opts_len;	/* Total length of options */
+	int		nduseropt_ifindex;
+	__u8		nduseropt_icmp_type;
+	__u8		nduseropt_icmp_code;
+	unsigned short	nduseropt_pad2;
+	unsigned int	nduseropt_pad3;
+	/* Followed by one or more ND options */
+};
+
+enum {
+	NDUSEROPT_UNSPEC,
+	NDUSEROPT_SRCADDR,
+	__NDUSEROPT_MAX
+};
+
+#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
+
+#ifndef __KERNEL__
+/* RTnetlink multicast groups - backwards compatibility for userspace */
+#define RTMGRP_LINK		1
+#define RTMGRP_NOTIFY		2
+#define RTMGRP_NEIGH		4
+#define RTMGRP_TC		8
+
+#define RTMGRP_IPV4_IFADDR	0x10
+#define RTMGRP_IPV4_MROUTE	0x20
+#define RTMGRP_IPV4_ROUTE	0x40
+#define RTMGRP_IPV4_RULE	0x80
+
+#define RTMGRP_IPV6_IFADDR	0x100
+#define RTMGRP_IPV6_MROUTE	0x200
+#define RTMGRP_IPV6_ROUTE	0x400
+#define RTMGRP_IPV6_IFINFO	0x800
+
+#define RTMGRP_DECnet_IFADDR    0x1000
+#define RTMGRP_DECnet_ROUTE     0x4000
+
+#define RTMGRP_IPV6_PREFIX	0x20000
+#endif
+
+/* RTnetlink multicast groups */
+enum rtnetlink_groups {
+	RTNLGRP_NONE,
+#define RTNLGRP_NONE		RTNLGRP_NONE
+	RTNLGRP_LINK,
+#define RTNLGRP_LINK		RTNLGRP_LINK
+	RTNLGRP_NOTIFY,
+#define RTNLGRP_NOTIFY		RTNLGRP_NOTIFY
+	RTNLGRP_NEIGH,
+#define RTNLGRP_NEIGH		RTNLGRP_NEIGH
+	RTNLGRP_TC,
+#define RTNLGRP_TC		RTNLGRP_TC
+	RTNLGRP_IPV4_IFADDR,
+#define RTNLGRP_IPV4_IFADDR	RTNLGRP_IPV4_IFADDR
+	RTNLGRP_IPV4_MROUTE,
+#define	RTNLGRP_IPV4_MROUTE	RTNLGRP_IPV4_MROUTE
+	RTNLGRP_IPV4_ROUTE,
+#define RTNLGRP_IPV4_ROUTE	RTNLGRP_IPV4_ROUTE
+	RTNLGRP_IPV4_RULE,
+#define RTNLGRP_IPV4_RULE	RTNLGRP_IPV4_RULE
+	RTNLGRP_IPV6_IFADDR,
+#define RTNLGRP_IPV6_IFADDR	RTNLGRP_IPV6_IFADDR
+	RTNLGRP_IPV6_MROUTE,
+#define RTNLGRP_IPV6_MROUTE	RTNLGRP_IPV6_MROUTE
+	RTNLGRP_IPV6_ROUTE,
+#define RTNLGRP_IPV6_ROUTE	RTNLGRP_IPV6_ROUTE
+	RTNLGRP_IPV6_IFINFO,
+#define RTNLGRP_IPV6_IFINFO	RTNLGRP_IPV6_IFINFO
+	RTNLGRP_DECnet_IFADDR,
+#define RTNLGRP_DECnet_IFADDR	RTNLGRP_DECnet_IFADDR
+	RTNLGRP_NOP2,
+	RTNLGRP_DECnet_ROUTE,
+#define RTNLGRP_DECnet_ROUTE	RTNLGRP_DECnet_ROUTE
+	RTNLGRP_DECnet_RULE,
+#define RTNLGRP_DECnet_RULE	RTNLGRP_DECnet_RULE
+	RTNLGRP_NOP4,
+	RTNLGRP_IPV6_PREFIX,
+#define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
+	RTNLGRP_IPV6_RULE,
+#define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
+	RTNLGRP_ND_USEROPT,
+#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
+	RTNLGRP_PHONET_IFADDR,
+#define RTNLGRP_PHONET_IFADDR	RTNLGRP_PHONET_IFADDR
+	RTNLGRP_PHONET_ROUTE,
+#define RTNLGRP_PHONET_ROUTE	RTNLGRP_PHONET_ROUTE
+	RTNLGRP_DCB,
+#define RTNLGRP_DCB		RTNLGRP_DCB
+	__RTNLGRP_MAX
+};
+#define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
+
+/* TC action piece */
+struct tcamsg {
+	unsigned char	tca_family;
+	unsigned char	tca__pad1;
+	unsigned short	tca__pad2;
+};
+#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
+#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
+#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
+#define TCAA_MAX 1
+
+/* New extended info filters for IFLA_EXT_MASK */
+#define RTEXT_FILTER_VF		(1 << 0)
+
+/* End of information exported to user level */
+
+
+
+#endif /* _UAPI__LINUX_RTNETLINK_H */
diff --git a/include/uapi/linux/scc.h b/include/uapi/linux/scc.h
new file mode 100644
index 0000000000000000000000000000000000000000..72b6b81533740495659f5dfc35b3f70f41ccfa4b
--- /dev/null
+++ b/include/uapi/linux/scc.h
@@ -0,0 +1,172 @@
+/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
+
+#ifndef _UAPI_SCC_H
+#define _UAPI_SCC_H
+
+
+/* selection of hardware types */
+
+#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
+#define EAGLE		0x01    /* hardware type for EAGLE card */
+#define PC100		0x02	/* hardware type for PC100 card */
+#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
+#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
+#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
+
+/* DEV ioctl() commands */
+
+enum SCC_ioctl_cmds {
+	SIOCSCCRESERVED = SIOCDEVPRIVATE,
+	SIOCSCCCFG,
+	SIOCSCCINI,
+	SIOCSCCCHANINI,
+	SIOCSCCSMEM,
+	SIOCSCCGKISS,
+	SIOCSCCSKISS,
+	SIOCSCCGSTAT,
+	SIOCSCCCAL
+};
+
+/* Device parameter control (from WAMPES) */
+
+enum L1_params {
+	PARAM_DATA,
+	PARAM_TXDELAY,
+	PARAM_PERSIST,
+	PARAM_SLOTTIME,
+	PARAM_TXTAIL,
+	PARAM_FULLDUP,
+	PARAM_SOFTDCD,		/* was: PARAM_HW */
+	PARAM_MUTE,		/* ??? */
+	PARAM_DTR,
+	PARAM_RTS,
+	PARAM_SPEED,
+	PARAM_ENDDELAY,		/* ??? */
+	PARAM_GROUP,
+	PARAM_IDLE,
+	PARAM_MIN,
+	PARAM_MAXKEY,
+	PARAM_WAIT,
+	PARAM_MAXDEFER,
+	PARAM_TX,
+	PARAM_HWEVENT = 31,
+	PARAM_RETURN = 255	/* reset kiss mode */
+};
+
+/* fulldup parameter */
+
+enum FULLDUP_modes {
+	KISS_DUPLEX_HALF,	/* normal CSMA operation */
+	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
+	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
+	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
+};
+
+/* misc. parameters */
+
+#define TIMER_OFF	65535U	/* to switch off timers */
+#define NO_SUCH_PARAM	65534U	/* param not implemented */
+
+/* HWEVENT parameter */
+
+enum HWEVENT_opts {
+	HWEV_DCD_ON,
+	HWEV_DCD_OFF,
+	HWEV_ALL_SENT
+};
+
+/* channel grouping */
+
+#define RXGROUP		0100	/* if set, only tx when all channels clear */
+#define TXGROUP		0200	/* if set, don't transmit simultaneously */
+
+/* Tx/Rx clock sources */
+
+enum CLOCK_sources {
+	CLK_DPLL,	/* normal halfduplex operation */
+	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
+	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
+			/* modems without clock regeneration */
+	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
+			/* MODEMs without clock recovery */
+};
+
+/* Tx state */
+
+enum TX_state {
+	TXS_IDLE,	/* Transmitter off, no data pending */
+	TXS_BUSY,	/* waiting for permission to send / tailtime */
+	TXS_ACTIVE,	/* Transmitter on, sending data */
+	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
+	TXS_IDLE2,	/* Transmitter on, no data pending */
+	TXS_WAIT,	/* Waiting for Mintime to expire */
+	TXS_TIMEOUT	/* We had a transmission timeout */
+};
+
+typedef unsigned long io_port;	/* type definition for an 'io port address' */
+
+/* SCC statistical information */
+
+struct scc_stat {
+        long rxints;            /* Receiver interrupts */
+        long txints;            /* Transmitter interrupts */
+        long exints;            /* External/status interrupts */
+        long spints;            /* Special receiver interrupts */
+
+        long txframes;          /* Packets sent */
+        long rxframes;          /* Number of Frames Actually Received */
+        long rxerrs;            /* CRC Errors */
+        long txerrs;		/* KISS errors */
+        
+	unsigned int nospace;	/* "Out of buffers" */
+	unsigned int rx_over;	/* Receiver Overruns */
+	unsigned int tx_under;	/* Transmitter Underruns */
+
+	unsigned int tx_state;	/* Transmitter state */
+	int tx_queued;		/* tx frames enqueued */
+
+	unsigned int maxqueue;	/* allocated tx_buffers */
+	unsigned int bufsize;	/* used buffersize */
+};
+
+struct scc_modem {
+	long speed;		/* Line speed, bps */
+	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
+	char nrz;		/* NRZ instead of NRZI */	
+};
+
+struct scc_kiss_cmd {
+	int  	 command;	/* one of the KISS-Commands defined above */
+	unsigned param;		/* KISS-Param */
+};
+
+struct scc_hw_config {
+	io_port data_a;		/* data port channel A */
+	io_port ctrl_a;		/* control port channel A */
+	io_port data_b;		/* data port channel B */
+	io_port ctrl_b;		/* control port channel B */
+	io_port vector_latch;	/* INTACK-Latch (#) */
+	io_port	special;	/* special function port */
+
+	int	irq;		/* irq */
+	long	clock;		/* clock */
+	char	option;		/* command for function port */
+
+	char brand;		/* hardware type */
+	char escc;		/* use ext. features of a 8580/85180/85280 */
+};
+
+/* (#) only one INTACK latch allowed. */
+
+
+struct scc_mem_config {
+	unsigned int dummy;
+	unsigned int bufsize;
+};
+
+struct scc_calibrate {
+	unsigned int time;
+	unsigned char pattern;
+};
+
+#endif /* _UAPI_SCC_H */
diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
new file mode 100644
index 0000000000000000000000000000000000000000..5a0f945927ace214da646d94920f485a256b7334
--- /dev/null
+++ b/include/uapi/linux/sched.h
@@ -0,0 +1,46 @@
+#ifndef _UAPI_LINUX_SCHED_H
+#define _UAPI_LINUX_SCHED_H
+
+/*
+ * cloning flags:
+ */
+#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
+#define CLONE_VM	0x00000100	/* set if VM shared between processes */
+#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
+#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
+#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
+#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
+#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
+#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
+#define CLONE_THREAD	0x00010000	/* Same thread group? */
+#define CLONE_NEWNS	0x00020000	/* New namespace group? */
+#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
+#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
+#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
+#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
+#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
+#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
+#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
+/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
+   and is now available for re-use. */
+#define CLONE_NEWUTS		0x04000000	/* New utsname group? */
+#define CLONE_NEWIPC		0x08000000	/* New ipcs */
+#define CLONE_NEWUSER		0x10000000	/* New user namespace */
+#define CLONE_NEWPID		0x20000000	/* New pid namespace */
+#define CLONE_NEWNET		0x40000000	/* New network namespace */
+#define CLONE_IO		0x80000000	/* Clone io context */
+
+/*
+ * Scheduling policies
+ */
+#define SCHED_NORMAL		0
+#define SCHED_FIFO		1
+#define SCHED_RR		2
+#define SCHED_BATCH		3
+/* SCHED_ISO: reserved but not implemented yet */
+#define SCHED_IDLE		5
+/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+#define SCHED_RESET_ON_FORK     0x40000000
+
+
+#endif /* _UAPI_LINUX_SCHED_H */
diff --git a/include/uapi/linux/screen_info.h b/include/uapi/linux/screen_info.h
new file mode 100644
index 0000000000000000000000000000000000000000..7530e7447620ef8e4a1fee697c016e84da52cf0f
--- /dev/null
+++ b/include/uapi/linux/screen_info.h
@@ -0,0 +1,74 @@
+#ifndef _UAPI_SCREEN_INFO_H
+#define _UAPI_SCREEN_INFO_H
+
+#include <linux/types.h>
+
+/*
+ * These are set up by the setup-routine at boot-time:
+ */
+
+struct screen_info {
+	__u8  orig_x;		/* 0x00 */
+	__u8  orig_y;		/* 0x01 */
+	__u16 ext_mem_k;	/* 0x02 */
+	__u16 orig_video_page;	/* 0x04 */
+	__u8  orig_video_mode;	/* 0x06 */
+	__u8  orig_video_cols;	/* 0x07 */
+	__u8  flags;		/* 0x08 */
+	__u8  unused2;		/* 0x09 */
+	__u16 orig_video_ega_bx;/* 0x0a */
+	__u16 unused3;		/* 0x0c */
+	__u8  orig_video_lines;	/* 0x0e */
+	__u8  orig_video_isVGA;	/* 0x0f */
+	__u16 orig_video_points;/* 0x10 */
+
+	/* VESA graphic mode -- linear frame buffer */
+	__u16 lfb_width;	/* 0x12 */
+	__u16 lfb_height;	/* 0x14 */
+	__u16 lfb_depth;	/* 0x16 */
+	__u32 lfb_base;		/* 0x18 */
+	__u32 lfb_size;		/* 0x1c */
+	__u16 cl_magic, cl_offset; /* 0x20 */
+	__u16 lfb_linelength;	/* 0x24 */
+	__u8  red_size;		/* 0x26 */
+	__u8  red_pos;		/* 0x27 */
+	__u8  green_size;	/* 0x28 */
+	__u8  green_pos;	/* 0x29 */
+	__u8  blue_size;	/* 0x2a */
+	__u8  blue_pos;		/* 0x2b */
+	__u8  rsvd_size;	/* 0x2c */
+	__u8  rsvd_pos;		/* 0x2d */
+	__u16 vesapm_seg;	/* 0x2e */
+	__u16 vesapm_off;	/* 0x30 */
+	__u16 pages;		/* 0x32 */
+	__u16 vesa_attributes;	/* 0x34 */
+	__u32 capabilities;     /* 0x36 */
+	__u8  _reserved[6];	/* 0x3a */
+} __attribute__((packed));
+
+#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
+#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
+#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
+#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
+#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
+#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
+
+#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
+#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
+#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
+
+#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
+
+#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
+#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
+
+#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
+
+#define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
+
+#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
+
+#define VIDEO_CAPABILITY_SKIP_QUIRKS	(1 << 0)
+
+
+#endif /* _UAPI_SCREEN_INFO_H */
diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h
new file mode 100644
index 0000000000000000000000000000000000000000..95eaff9c9e49b00f7294372effe8358d021b6775
--- /dev/null
+++ b/include/uapi/linux/sdla.h
@@ -0,0 +1,116 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Frame relay interface.
+ *
+ * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	Structure packing
+ *
+ *		0.20	Mike McLagan	New flags for S508 buffer handling
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPISDLA_H
+#define _UAPISDLA_H
+
+/* adapter type */
+#define SDLA_TYPES
+#define SDLA_S502A			5020
+#define SDLA_S502E			5021
+#define SDLA_S503			5030
+#define SDLA_S507			5070
+#define SDLA_S508			5080
+#define SDLA_S509			5090
+#define SDLA_UNKNOWN			-1
+
+/* port selection flags for the S508 */
+#define SDLA_S508_PORT_V35		0x00
+#define SDLA_S508_PORT_RS232		0x02
+
+/* Z80 CPU speeds */
+#define SDLA_CPU_3M			0x00
+#define SDLA_CPU_5M			0x01
+#define SDLA_CPU_7M			0x02
+#define SDLA_CPU_8M			0x03
+#define SDLA_CPU_10M			0x04
+#define SDLA_CPU_16M			0x05
+#define SDLA_CPU_12M			0x06
+
+/* some private IOCTLs */
+#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
+#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
+#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
+
+#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
+#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
+#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
+
+struct sdla_mem {
+   int  addr;
+   int  len;
+   void __user *data;
+};
+
+#define SDLA_START			(FRAD_LAST_IOCTL + 7)
+#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
+
+/* some offsets in the Z80's memory space */
+#define SDLA_NMIADDR			0x0000
+#define SDLA_CONF_ADDR			0x0010
+#define SDLA_S502A_NMIADDR		0x0066
+#define SDLA_CODE_BASEADDR		0x0100
+#define SDLA_WINDOW_SIZE		0x2000
+#define SDLA_ADDR_MASK			0x1FFF
+
+/* largest handleable block of data */
+#define SDLA_MAX_DATA			4080
+#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
+#define SDLA_MAX_DLCI			24
+
+/* this should be the same as frad_conf */
+struct sdla_conf {
+   short station;
+   short config;
+   short kbaud;
+   short clocking;
+   short max_frm;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+};
+
+/* this should be the same as dlci_conf */
+struct sdla_dlci_conf {
+   short config;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+};
+
+
+#endif /* _UAPISDLA_H */
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
new file mode 100644
index 0000000000000000000000000000000000000000..ac2dc9f7297367c0529ed70e7ed02a8be8f4c27f
--- /dev/null
+++ b/include/uapi/linux/seccomp.h
@@ -0,0 +1,47 @@
+#ifndef _UAPI_LINUX_SECCOMP_H
+#define _UAPI_LINUX_SECCOMP_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
+#define SECCOMP_MODE_DISABLED	0 /* seccomp is not in use. */
+#define SECCOMP_MODE_STRICT	1 /* uses hard-coded filter. */
+#define SECCOMP_MODE_FILTER	2 /* uses user-supplied filter. */
+
+/*
+ * All BPF programs must return a 32-bit value.
+ * The bottom 16-bits are for optional return data.
+ * The upper 16-bits are ordered from least permissive values to most.
+ *
+ * The ordering ensures that a min_t() over composed return values always
+ * selects the least permissive choice.
+ */
+#define SECCOMP_RET_KILL	0x00000000U /* kill the task immediately */
+#define SECCOMP_RET_TRAP	0x00030000U /* disallow and force a SIGSYS */
+#define SECCOMP_RET_ERRNO	0x00050000U /* returns an errno */
+#define SECCOMP_RET_TRACE	0x7ff00000U /* pass to a tracer or disallow */
+#define SECCOMP_RET_ALLOW	0x7fff0000U /* allow */
+
+/* Masks for the return value sections. */
+#define SECCOMP_RET_ACTION	0x7fff0000U
+#define SECCOMP_RET_DATA	0x0000ffffU
+
+/**
+ * struct seccomp_data - the format the BPF program executes over.
+ * @nr: the system call number
+ * @arch: indicates system call convention as an AUDIT_ARCH_* value
+ *        as defined in <linux/audit.h>.
+ * @instruction_pointer: at the time of the system call.
+ * @args: up to 6 system call arguments always stored as 64-bit values
+ *        regardless of the architecture.
+ */
+struct seccomp_data {
+	int nr;
+	__u32 arch;
+	__u64 instruction_pointer;
+	__u64 args[6];
+};
+
+#endif /* _UAPI_LINUX_SECCOMP_H */
diff --git a/include/uapi/linux/securebits.h b/include/uapi/linux/securebits.h
new file mode 100644
index 0000000000000000000000000000000000000000..985aac9e6bf888214aa8943359112c596037957a
--- /dev/null
+++ b/include/uapi/linux/securebits.h
@@ -0,0 +1,51 @@
+#ifndef _UAPI_LINUX_SECUREBITS_H
+#define _UAPI_LINUX_SECUREBITS_H
+
+/* Each securesetting is implemented using two bits. One bit specifies
+   whether the setting is on or off. The other bit specify whether the
+   setting is locked or not. A setting which is locked cannot be
+   changed from user-level. */
+#define issecure_mask(X)	(1 << (X))
+
+#define SECUREBITS_DEFAULT 0x00000000
+
+/* When set UID 0 has no special privileges. When unset, we support
+   inheritance of root-permissions and suid-root executable under
+   compatibility mode. We raise the effective and inheritable bitmasks
+   *of the executable file* if the effective uid of the new process is
+   0. If the real uid is 0, we raise the effective (legacy) bit of the
+   executable file. */
+#define SECURE_NOROOT			0
+#define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
+
+#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
+#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
+
+/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
+   When unset, to provide compatiblility with old programs relying on
+   set*uid to gain/lose privilege, transitions to/from uid 0 cause
+   capabilities to be gained/lost. */
+#define SECURE_NO_SETUID_FIXUP		2
+#define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
+
+#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
+#define SECBIT_NO_SETUID_FIXUP_LOCKED \
+			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
+
+/* When set, a process can retain its capabilities even after
+   transitioning to a non-root user (the set-uid fixup suppressed by
+   bit 2). Bit-4 is cleared when a process calls exec(); setting both
+   bit 4 and 5 will create a barrier through exec that no exec()'d
+   child can use this feature again. */
+#define SECURE_KEEP_CAPS		4
+#define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
+
+#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
+#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
+
+#define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
+				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
+				 issecure_mask(SECURE_KEEP_CAPS))
+#define SECURE_ALL_LOCKS	(SECURE_ALL_BITS << 1)
+
+#endif /* _UAPI_LINUX_SECUREBITS_H */
diff --git a/include/linux/selinux_netlink.h b/include/uapi/linux/selinux_netlink.h
similarity index 100%
rename from include/linux/selinux_netlink.h
rename to include/uapi/linux/selinux_netlink.h
diff --git a/include/uapi/linux/sem.h b/include/uapi/linux/sem.h
new file mode 100644
index 0000000000000000000000000000000000000000..541fce03b50cfb360004008f60b6d1a9d876ccd0
--- /dev/null
+++ b/include/uapi/linux/sem.h
@@ -0,0 +1,80 @@
+#ifndef _UAPI_LINUX_SEM_H
+#define _UAPI_LINUX_SEM_H
+
+#include <linux/ipc.h>
+
+/* semop flags */
+#define SEM_UNDO        0x1000  /* undo the operation on exit */
+
+/* semctl Command Definitions. */
+#define GETPID  11       /* get sempid */
+#define GETVAL  12       /* get semval */
+#define GETALL  13       /* get all semval's */
+#define GETNCNT 14       /* get semncnt */
+#define GETZCNT 15       /* get semzcnt */
+#define SETVAL  16       /* set semval */
+#define SETALL  17       /* set all semval's */
+
+/* ipcs ctl cmds */
+#define SEM_STAT 18
+#define SEM_INFO 19
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct semid_ds {
+	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	struct sem	*sem_base;		/* ptr to first semaphore in array */
+	struct sem_queue *sem_pending;		/* pending operations to be processed */
+	struct sem_queue **sem_pending_last;	/* last pending operation */
+	struct sem_undo	*undo;			/* undo requests on this array */
+	unsigned short	sem_nsems;		/* no. of semaphores in array */
+};
+
+/* Include the definition of semid64_ds */
+#include <asm/sembuf.h>
+
+/* semop system calls takes an array of these. */
+struct sembuf {
+	unsigned short  sem_num;	/* semaphore index in array */
+	short		sem_op;		/* semaphore operation */
+	short		sem_flg;	/* operation flags */
+};
+
+/* arg for semctl system calls. */
+union semun {
+	int val;			/* value for SETVAL */
+	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
+	unsigned short __user *array;	/* array for GETALL & SETALL */
+	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
+	void __user *__pad;
+};
+
+struct  seminfo {
+	int semmap;
+	int semmni;
+	int semmns;
+	int semmnu;
+	int semmsl;
+	int semopm;
+	int semume;
+	int semusz;
+	int semvmx;
+	int semaem;
+};
+
+#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
+#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
+#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
+#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
+#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
+#define SEMAEM  SEMVMX          /* adjust on exit max value */
+
+/* unused */
+#define SEMUME  SEMOPM          /* max num of undo entries per process */
+#define SEMMNU  SEMMNS          /* num of undo structures system wide */
+#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
+#define SEMUSZ  20		/* sizeof struct sem_undo */
+
+
+#endif /* _UAPI_LINUX_SEM_H */
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
new file mode 100644
index 0000000000000000000000000000000000000000..5e0d0ed61cf3b76d2ee7cae605834d8139cf73ee
--- /dev/null
+++ b/include/uapi/linux/serial.h
@@ -0,0 +1,126 @@
+/*
+ * include/linux/serial.h
+ *
+ * Copyright (C) 1992 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ */
+
+#ifndef _UAPI_LINUX_SERIAL_H
+#define _UAPI_LINUX_SERIAL_H
+
+#include <linux/types.h>
+
+#include <linux/tty_flags.h>
+
+
+struct serial_struct {
+	int	type;
+	int	line;
+	unsigned int	port;
+	int	irq;
+	int	flags;
+	int	xmit_fifo_size;
+	int	custom_divisor;
+	int	baud_base;
+	unsigned short	close_delay;
+	char	io_type;
+	char	reserved_char[1];
+	int	hub6;
+	unsigned short	closing_wait; /* time to wait before closing */
+	unsigned short	closing_wait2; /* no longer used... */
+	unsigned char	*iomem_base;
+	unsigned short	iomem_reg_shift;
+	unsigned int	port_high;
+	unsigned long	iomap_base;	/* cookie passed into ioremap */
+};
+
+/*
+ * For the close wait times, 0 means wait forever for serial port to
+ * flush its output.  65535 means don't wait at all.
+ */
+#define ASYNC_CLOSING_WAIT_INF	0
+#define ASYNC_CLOSING_WAIT_NONE	65535
+
+/*
+ * These are the supported serial types.
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS     5	/* usurped by cyclades.c */
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9	/* usurped by cyclades.c */
+#define PORT_16C950	10	/* Oxford Semiconductor */
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13	/* RSA-DV II/S card */
+#define PORT_MAX	13
+
+#define SERIAL_IO_PORT	0
+#define SERIAL_IO_HUB6	1
+#define SERIAL_IO_MEM	2
+
+#define UART_CLEAR_FIFO		0x01
+#define UART_USE_FIFO		0x02
+#define UART_STARTECH		0x04
+#define UART_NATSEMI		0x08
+
+
+/*
+ * Multiport serial configuration structure --- external structure
+ */
+struct serial_multiport_struct {
+	int		irq;
+	int		port1;
+	unsigned char	mask1, match1;
+	int		port2;
+	unsigned char	mask2, match2;
+	int		port3;
+	unsigned char	mask3, match3;
+	int		port4;
+	unsigned char	mask4, match4;
+	int		port_monitor;
+	int	reserved[32];
+};
+
+/*
+ * Serial input interrupt line counters -- external structure
+ * Four lines can interrupt: CTS, DSR, RI, DCD
+ */
+struct serial_icounter_struct {
+	int cts, dsr, rng, dcd;
+	int rx, tx;
+	int frame, overrun, parity, brk;
+	int buf_overrun;
+	int reserved[9];
+};
+
+/*
+ * Serial interface for controlling RS485 settings on chips with suitable
+ * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
+ * platform. The set function returns the new state, with any unsupported bits
+ * reverted appropriately.
+ */
+
+struct serial_rs485 {
+	__u32	flags;			/* RS485 feature flags */
+#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
+#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
+							   RTS pin when
+							   sending */
+#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
+							   RTS pin after sent*/
+#define SER_RS485_RX_DURING_TX		(1 << 4)
+	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
+	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
+	__u32	padding[5];		/* Memory is cheap, new structs
+					   are a royal PITA .. */
+};
+
+#endif /* _UAPI_LINUX_SERIAL_H */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
new file mode 100644
index 0000000000000000000000000000000000000000..7e1ab20adc03f3e2fc16066ab2dfba5df7cdac99
--- /dev/null
+++ b/include/uapi/linux/serial_core.h
@@ -0,0 +1,219 @@
+/*
+ *  linux/drivers/char/serial_core.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _UAPILINUX_SERIAL_CORE_H
+#define _UAPILINUX_SERIAL_CORE_H
+
+#include <linux/serial.h>
+
+/*
+ * The type definitions.  These are from Ted Ts'o's serial.h
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS	5
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9
+#define PORT_16C950	10
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13
+#define PORT_NS16550A	14
+#define PORT_XSCALE	15
+#define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
+#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
+#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
+#define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
+#define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
+#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
+#define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
+#define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
+#define PORT_MAX_8250	23	/* max port ID */
+
+/*
+ * ARM specific type numbers.  These are not currently guaranteed
+ * to be implemented, and will change in the future.  These are
+ * separate so any additions to the old serial.c that occur before
+ * we are merged can be easily merged here.
+ */
+#define PORT_PXA	31
+#define PORT_AMBA	32
+#define PORT_CLPS711X	33
+#define PORT_SA1100	34
+#define PORT_UART00	35
+#define PORT_21285	37
+
+/* Sparc type numbers.  */
+#define PORT_SUNZILOG	38
+#define PORT_SUNSAB	39
+
+/* DEC */
+#define PORT_DZ		46
+#define PORT_ZS		47
+
+/* Parisc type numbers. */
+#define PORT_MUX	48
+
+/* Atmel AT91 / AT32 SoC */
+#define PORT_ATMEL	49
+
+/* Macintosh Zilog type numbers */
+#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
+#define PORT_PMAC_ZILOG	51
+
+/* SH-SCI */
+#define PORT_SCI	52
+#define PORT_SCIF	53
+#define PORT_IRDA	54
+
+/* Samsung S3C2410 SoC and derivatives thereof */
+#define PORT_S3C2410    55
+
+/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
+#define PORT_IP22ZILOG	56
+
+/* Sharp LH7a40x -- an ARM9 SoC series */
+#define PORT_LH7A40X	57
+
+/* PPC CPM type number */
+#define PORT_CPM        58
+
+/* MPC52xx (and MPC512x) type numbers */
+#define PORT_MPC52xx	59
+
+/* IBM icom */
+#define PORT_ICOM	60
+
+/* Samsung S3C2440 SoC */
+#define PORT_S3C2440	61
+
+/* Motorola i.MX SoC */
+#define PORT_IMX	62
+
+/* Marvell MPSC */
+#define PORT_MPSC	63
+
+/* TXX9 type number */
+#define PORT_TXX9	64
+
+/* NEC VR4100 series SIU/DSIU */
+#define PORT_VR41XX_SIU		65
+#define PORT_VR41XX_DSIU	66
+
+/* Samsung S3C2400 SoC */
+#define PORT_S3C2400	67
+
+/* M32R SIO */
+#define PORT_M32R_SIO	68
+
+/*Digi jsm */
+#define PORT_JSM        69
+
+#define PORT_PNX8XXX	70
+
+/* Hilscher netx */
+#define PORT_NETX	71
+
+/* SUN4V Hypervisor Console */
+#define PORT_SUNHV	72
+
+#define PORT_S3C2412	73
+
+/* Xilinx uartlite */
+#define PORT_UARTLITE	74
+
+/* Blackfin bf5xx */
+#define PORT_BFIN	75
+
+/* Micrel KS8695 */
+#define PORT_KS8695	76
+
+/* Broadcom SB1250, etc. SOC */
+#define PORT_SB1250_DUART	77
+
+/* Freescale ColdFire */
+#define PORT_MCF	78
+
+/* Blackfin SPORT */
+#define PORT_BFIN_SPORT		79
+
+/* MN10300 on-chip UART numbers */
+#define PORT_MN10300		80
+#define PORT_MN10300_CTS	81
+
+#define PORT_SC26XX	82
+
+/* SH-SCI */
+#define PORT_SCIFA	83
+
+#define PORT_S3C6400	84
+
+/* NWPSERIAL */
+#define PORT_NWPSERIAL	85
+
+/* MAX3100 */
+#define PORT_MAX3100    86
+
+/* Timberdale UART */
+#define PORT_TIMBUART	87
+
+/* Qualcomm MSM SoCs */
+#define PORT_MSM	88
+
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX	89
+
+/* Aeroflex Gaisler GRLIB APBUART */
+#define PORT_APBUART    90
+
+/* Altera UARTs */
+#define PORT_ALTERA_JTAGUART	91
+#define PORT_ALTERA_UART	92
+
+/* SH-SCI */
+#define PORT_SCIFB	93
+
+/* MAX310X */
+#define PORT_MAX310X	94
+
+/* High Speed UART for Medfield */
+#define PORT_MFD	95
+
+/* TI OMAP-UART */
+#define PORT_OMAP	96
+
+/* VIA VT8500 SoC */
+#define PORT_VT8500	97
+
+/* Xilinx PSS UART */
+#define PORT_XUARTPS	98
+
+/* Atheros AR933X SoC */
+#define PORT_AR933X	99
+
+/* Energy Micro efm32 SoC */
+#define PORT_EFMUART   100
+
+
+#endif /* _UAPILINUX_SERIAL_CORE_H */
diff --git a/include/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
similarity index 100%
rename from include/linux/serial_reg.h
rename to include/uapi/linux/serial_reg.h
diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h
new file mode 100644
index 0000000000000000000000000000000000000000..9f53fa7fc132209924269ad02f521e8c66f0a9d9
--- /dev/null
+++ b/include/uapi/linux/serio.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 1999-2002 Vojtech Pavlik
+*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_SERIO_H
+#define _UAPI_SERIO_H
+
+
+#include <linux/ioctl.h>
+
+#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
+
+
+/*
+ * bit masks for use in "interrupt" flags (3rd argument)
+ */
+#define SERIO_TIMEOUT	1
+#define SERIO_PARITY	2
+#define SERIO_FRAME	4
+
+/*
+ * Serio types
+ */
+#define SERIO_XT	0x00
+#define SERIO_8042	0x01
+#define SERIO_RS232	0x02
+#define SERIO_HIL_MLC	0x03
+#define SERIO_PS_PSTHRU	0x05
+#define SERIO_8042_XL	0x06
+
+/*
+ * Serio protocols
+ */
+#define SERIO_UNKNOWN	0x00
+#define SERIO_MSC	0x01
+#define SERIO_SUN	0x02
+#define SERIO_MS	0x03
+#define SERIO_MP	0x04
+#define SERIO_MZ	0x05
+#define SERIO_MZP	0x06
+#define SERIO_MZPP	0x07
+#define SERIO_VSXXXAA	0x08
+#define SERIO_SUNKBD	0x10
+#define SERIO_WARRIOR	0x18
+#define SERIO_SPACEORB	0x19
+#define SERIO_MAGELLAN	0x1a
+#define SERIO_SPACEBALL	0x1b
+#define SERIO_GUNZE	0x1c
+#define SERIO_IFORCE	0x1d
+#define SERIO_STINGER	0x1e
+#define SERIO_NEWTON	0x1f
+#define SERIO_STOWAWAY	0x20
+#define SERIO_H3600	0x21
+#define SERIO_PS2SER	0x22
+#define SERIO_TWIDKBD	0x23
+#define SERIO_TWIDJOY	0x24
+#define SERIO_HIL	0x25
+#define SERIO_SNES232	0x26
+#define SERIO_SEMTECH	0x27
+#define SERIO_LKKBD	0x28
+#define SERIO_ELO	0x29
+#define SERIO_MICROTOUCH	0x30
+#define SERIO_PENMOUNT	0x31
+#define SERIO_TOUCHRIGHT	0x32
+#define SERIO_TOUCHWIN	0x33
+#define SERIO_TAOSEVM	0x34
+#define SERIO_FUJITSU	0x35
+#define SERIO_ZHENHUA	0x36
+#define SERIO_INEXIO	0x37
+#define SERIO_TOUCHIT213	0x38
+#define SERIO_W8001	0x39
+#define SERIO_DYNAPRO	0x3a
+#define SERIO_HAMPSHIRE	0x3b
+#define SERIO_PS2MULT	0x3c
+#define SERIO_TSC40	0x3d
+
+#endif /* _UAPI_SERIO_H */
diff --git a/include/uapi/linux/shm.h b/include/uapi/linux/shm.h
new file mode 100644
index 0000000000000000000000000000000000000000..ec36fa1a83a44ce26db2b8f1df203bfb33c85d5f
--- /dev/null
+++ b/include/uapi/linux/shm.h
@@ -0,0 +1,79 @@
+#ifndef _UAPI_LINUX_SHM_H_
+#define _UAPI_LINUX_SHM_H_
+
+#include <linux/ipc.h>
+#include <linux/errno.h>
+#ifndef __KERNEL__
+#include <unistd.h>
+#endif
+
+/*
+ * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
+ * be increased by sysctl
+ */
+
+#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
+#define SHMMIN 1			 /* min shared seg size (bytes) */
+#define SHMMNI 4096			 /* max num of segs system wide */
+#ifndef __KERNEL__
+#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
+#endif
+#define SHMSEG SHMMNI			 /* max shared segs per process */
+
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct shmid_ds {
+	struct ipc_perm		shm_perm;	/* operation perms */
+	int			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
+	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
+	unsigned short		shm_nattch;	/* no. of current attaches */
+	unsigned short 		shm_unused;	/* compatibility */
+	void 			*shm_unused2;	/* ditto - used by DIPC */
+	void			*shm_unused3;	/* unused */
+};
+
+/* Include the definition of shmid64_ds and shminfo64 */
+#include <asm/shmbuf.h>
+
+/* permission flag for shmget */
+#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
+#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
+
+/* mode for attach */
+#define	SHM_RDONLY	010000	/* read-only access */
+#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
+#define	SHM_REMAP	040000	/* take-over region on attach */
+#define	SHM_EXEC	0100000	/* execution access */
+
+/* super user shmctl commands */
+#define SHM_LOCK 	11
+#define SHM_UNLOCK 	12
+
+/* ipcs ctl commands */
+#define SHM_STAT 	13
+#define SHM_INFO 	14
+
+/* Obsolete, used only for backwards compatibility */
+struct	shminfo {
+	int shmmax;
+	int shmmin;
+	int shmmni;
+	int shmseg;
+	int shmall;
+};
+
+struct shm_info {
+	int used_ids;
+	unsigned long shm_tot;	/* total allocated shm */
+	unsigned long shm_rss;	/* total resident shm */
+	unsigned long shm_swp;	/* total swapped shm */
+	unsigned long swap_attempts;
+	unsigned long swap_successes;
+};
+
+
+#endif /* _UAPI_LINUX_SHM_H_ */
diff --git a/include/uapi/linux/signal.h b/include/uapi/linux/signal.h
new file mode 100644
index 0000000000000000000000000000000000000000..dff452ed6d00a21058a7c8ae4e94d2d1ed207d4b
--- /dev/null
+++ b/include/uapi/linux/signal.h
@@ -0,0 +1,8 @@
+#ifndef _UAPI_LINUX_SIGNAL_H
+#define _UAPI_LINUX_SIGNAL_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+
+#endif /* _UAPI_LINUX_SIGNAL_H */
diff --git a/include/uapi/linux/signalfd.h b/include/uapi/linux/signalfd.h
new file mode 100644
index 0000000000000000000000000000000000000000..492c6def340da6954b750f1248498a758910df9f
--- /dev/null
+++ b/include/uapi/linux/signalfd.h
@@ -0,0 +1,52 @@
+/*
+ *  include/linux/signalfd.h
+ *
+ *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _UAPI_LINUX_SIGNALFD_H
+#define _UAPI_LINUX_SIGNALFD_H
+
+#include <linux/types.h>
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+
+/* Flags for signalfd4.  */
+#define SFD_CLOEXEC O_CLOEXEC
+#define SFD_NONBLOCK O_NONBLOCK
+
+struct signalfd_siginfo {
+	__u32 ssi_signo;
+	__s32 ssi_errno;
+	__s32 ssi_code;
+	__u32 ssi_pid;
+	__u32 ssi_uid;
+	__s32 ssi_fd;
+	__u32 ssi_tid;
+	__u32 ssi_band;
+	__u32 ssi_overrun;
+	__u32 ssi_trapno;
+	__s32 ssi_status;
+	__s32 ssi_int;
+	__u64 ssi_ptr;
+	__u64 ssi_utime;
+	__u64 ssi_stime;
+	__u64 ssi_addr;
+	__u16 ssi_addr_lsb;
+
+	/*
+	 * Pad strcture to 128 bytes. Remember to update the
+	 * pad size when you add new members. We use a fixed
+	 * size structure to avoid compatibility problems with
+	 * future versions, and we leave extra space for additional
+	 * members. We use fixed size members because this strcture
+	 * comes out of a read(2) and we really don't want to have
+	 * a compat on read(2).
+	 */
+	__u8 __pad[46];
+};
+
+
+
+#endif /* _UAPI_LINUX_SIGNALFD_H */
diff --git a/include/linux/snmp.h b/include/uapi/linux/snmp.h
similarity index 100%
rename from include/linux/snmp.h
rename to include/uapi/linux/snmp.h
diff --git a/include/uapi/linux/sock_diag.h b/include/uapi/linux/sock_diag.h
new file mode 100644
index 0000000000000000000000000000000000000000..b00e29efb1619bb1943e7aa7062bb64c10f8b995
--- /dev/null
+++ b/include/uapi/linux/sock_diag.h
@@ -0,0 +1,26 @@
+#ifndef _UAPI__SOCK_DIAG_H__
+#define _UAPI__SOCK_DIAG_H__
+
+#include <linux/types.h>
+
+#define SOCK_DIAG_BY_FAMILY 20
+
+struct sock_diag_req {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+};
+
+enum {
+	SK_MEMINFO_RMEM_ALLOC,
+	SK_MEMINFO_RCVBUF,
+	SK_MEMINFO_WMEM_ALLOC,
+	SK_MEMINFO_SNDBUF,
+	SK_MEMINFO_FWD_ALLOC,
+	SK_MEMINFO_WMEM_QUEUED,
+	SK_MEMINFO_OPTMEM,
+	SK_MEMINFO_BACKLOG,
+
+	SK_MEMINFO_VARS,
+};
+
+#endif /* _UAPI__SOCK_DIAG_H__ */
diff --git a/include/uapi/linux/socket.h b/include/uapi/linux/socket.h
new file mode 100644
index 0000000000000000000000000000000000000000..76ab0c68561eded34764c2bb29cbdf0c39292320
--- /dev/null
+++ b/include/uapi/linux/socket.h
@@ -0,0 +1,21 @@
+#ifndef _UAPI_LINUX_SOCKET_H
+#define _UAPI_LINUX_SOCKET_H
+
+/*
+ * Desired design of maximum size and alignment (see RFC2553)
+ */
+#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
+#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
+				/* Implementation specific desired alignment */
+
+typedef unsigned short __kernel_sa_family_t;
+
+struct __kernel_sockaddr_storage {
+	__kernel_sa_family_t	ss_family;		/* address family */
+	/* Following field(s) are implementation specific */
+	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
+				/* space to achieve desired size, */
+				/* _SS_MAXSIZE value minus size of ss_family */
+} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
+
+#endif /* _UAPI_LINUX_SOCKET_H */
diff --git a/include/linux/sockios.h b/include/uapi/linux/sockios.h
similarity index 100%
rename from include/linux/sockios.h
rename to include/uapi/linux/sockios.h
diff --git a/include/linux/som.h b/include/uapi/linux/som.h
similarity index 100%
rename from include/linux/som.h
rename to include/uapi/linux/som.h
diff --git a/include/uapi/linux/sonet.h b/include/uapi/linux/sonet.h
new file mode 100644
index 0000000000000000000000000000000000000000..cc54acee81ba827676f80e1c3542690e73981a6f
--- /dev/null
+++ b/include/uapi/linux/sonet.h
@@ -0,0 +1,60 @@
+/* sonet.h - SONET/SHD physical layer control */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _UAPILINUX_SONET_H
+#define _UAPILINUX_SONET_H
+
+#define __SONET_ITEMS \
+    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
+    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
+    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
+    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
+    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
+    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
+    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
+    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
+    __HANDLE_ITEM(rx_cells);		/* cells received */
+
+struct sonet_stats {
+#define __HANDLE_ITEM(i) int i
+	__SONET_ITEMS
+#undef __HANDLE_ITEM
+} __attribute__ ((packed));
+
+
+#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
+					/* get statistics */
+#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
+					/* ... and zero counters */
+#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
+					/* set error insertion */
+#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
+					/* clear error insertion */
+#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
+					/* query error insertion */
+#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
+					/* set framing mode (SONET/SDH) */
+#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
+					/* get framing mode */
+#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
+  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
+
+#define SONET_INS_SBIP	  1		/* section BIP */
+#define SONET_INS_LBIP	  2		/* line BIP */
+#define SONET_INS_PBIP	  4		/* path BIP */
+#define SONET_INS_FRAME	  8		/* out of frame */
+#define SONET_INS_LOS	 16		/* set line to zero */
+#define SONET_INS_LAIS	 32		/* line alarm indication signal */
+#define SONET_INS_PAIS	 64		/* path alarm indication signal */
+#define SONET_INS_HCS	128		/* insert HCS error */
+
+#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
+#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
+
+#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
+
+
+
+#endif /* _UAPILINUX_SONET_H */
diff --git a/include/uapi/linux/sonypi.h b/include/uapi/linux/sonypi.h
new file mode 100644
index 0000000000000000000000000000000000000000..85078a283573d70f0e80a291b881817739d0bdd9
--- /dev/null
+++ b/include/uapi/linux/sonypi.h
@@ -0,0 +1,146 @@
+/*
+ * Sony Programmable I/O Control Device driver for VAIO
+ *
+ * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
+
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+ *
+ * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+ *
+ * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _UAPI_SONYPI_H_
+#define _UAPI_SONYPI_H_
+
+#include <linux/types.h>
+
+/* events the user application reading /dev/sonypi can use */
+
+#define SONYPI_EVENT_IGNORE			 0
+#define SONYPI_EVENT_JOGDIAL_DOWN		 1
+#define SONYPI_EVENT_JOGDIAL_UP			 2
+#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
+#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
+#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
+#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PRESSED		 7
+#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
+#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
+#define SONYPI_EVENT_FNKEY_ESC			11
+#define SONYPI_EVENT_FNKEY_F1			12
+#define SONYPI_EVENT_FNKEY_F2			13
+#define SONYPI_EVENT_FNKEY_F3			14
+#define SONYPI_EVENT_FNKEY_F4			15
+#define SONYPI_EVENT_FNKEY_F5			16
+#define SONYPI_EVENT_FNKEY_F6			17
+#define SONYPI_EVENT_FNKEY_F7			18
+#define SONYPI_EVENT_FNKEY_F8			19
+#define SONYPI_EVENT_FNKEY_F9			20
+#define SONYPI_EVENT_FNKEY_F10			21
+#define SONYPI_EVENT_FNKEY_F11			22
+#define SONYPI_EVENT_FNKEY_F12			23
+#define SONYPI_EVENT_FNKEY_1			24
+#define SONYPI_EVENT_FNKEY_2			25
+#define SONYPI_EVENT_FNKEY_D			26
+#define SONYPI_EVENT_FNKEY_E			27
+#define SONYPI_EVENT_FNKEY_F			28
+#define SONYPI_EVENT_FNKEY_S			29
+#define SONYPI_EVENT_FNKEY_B			30
+#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
+#define SONYPI_EVENT_PKEY_P1			32
+#define SONYPI_EVENT_PKEY_P2			33
+#define SONYPI_EVENT_PKEY_P3			34
+#define SONYPI_EVENT_BACK_PRESSED		35
+#define SONYPI_EVENT_LID_CLOSED			36
+#define SONYPI_EVENT_LID_OPENED			37
+#define SONYPI_EVENT_BLUETOOTH_ON		38
+#define SONYPI_EVENT_BLUETOOTH_OFF		39
+#define SONYPI_EVENT_HELP_PRESSED		40
+#define SONYPI_EVENT_FNKEY_ONLY			41
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
+#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
+#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
+#define SONYPI_EVENT_ZOOM_PRESSED		50
+#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
+#define SONYPI_EVENT_MEYE_FACE			52
+#define SONYPI_EVENT_MEYE_OPPOSITE		53
+#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
+#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
+#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
+#define SONYPI_EVENT_BATTERY_INSERT		57
+#define SONYPI_EVENT_BATTERY_REMOVE		58
+#define SONYPI_EVENT_FNKEY_RELEASED		59
+#define SONYPI_EVENT_WIRELESS_ON		60
+#define SONYPI_EVENT_WIRELESS_OFF		61
+#define SONYPI_EVENT_ZOOM_IN_PRESSED		62
+#define SONYPI_EVENT_ZOOM_OUT_PRESSED		63
+#define SONYPI_EVENT_CD_EJECT_PRESSED		64
+#define SONYPI_EVENT_MODEKEY_PRESSED		65
+#define SONYPI_EVENT_PKEY_P4			66
+#define SONYPI_EVENT_PKEY_P5			67
+#define SONYPI_EVENT_SETTINGKEY_PRESSED		68
+#define SONYPI_EVENT_VOLUME_INC_PRESSED		69
+#define SONYPI_EVENT_VOLUME_DEC_PRESSED		70
+#define SONYPI_EVENT_BRIGHTNESS_PRESSED		71
+#define SONYPI_EVENT_MEDIA_PRESSED		72
+#define SONYPI_EVENT_VENDOR_PRESSED		73
+
+/* get/set brightness */
+#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
+#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
+
+/* get battery full capacity/remaining capacity */
+#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
+#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
+#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
+#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
+
+/* get battery flags: battery1/battery2/ac adapter present */
+#define SONYPI_BFLAGS_B1	0x01
+#define SONYPI_BFLAGS_B2	0x02
+#define SONYPI_BFLAGS_AC	0x04
+#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
+
+/* get/set bluetooth subsystem state on/off */
+#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
+#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
+
+/* get/set fan state on/off */
+#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
+#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
+
+/* get temperature (C) */
+#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
+
+
+#endif /* _UAPI_SONYPI_H_ */
diff --git a/include/uapi/linux/sound.h b/include/uapi/linux/sound.h
new file mode 100644
index 0000000000000000000000000000000000000000..014c9117c224bf6491bac29f22fa057959065232
--- /dev/null
+++ b/include/uapi/linux/sound.h
@@ -0,0 +1,31 @@
+#ifndef _UAPI_LINUX_SOUND_H
+#define _UAPI_LINUX_SOUND_H
+
+/*
+ * Minor numbers for the sound driver.
+ */
+
+#include <linux/fs.h>
+
+#define SND_DEV_CTL		0	/* Control port /dev/mixer */
+#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
+						synthesizer and MIDI output) */
+#define SND_DEV_MIDIN		2	/* Raw midi access */
+#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
+#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
+#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
+/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
+#define SND_DEV_UNUSED		6
+#define SND_DEV_AWFM		7	/* Reserved */
+#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
+/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
+/* #define SND_DEV_DMMIDI	9 */
+#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
+#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
+#define SND_DEV_UNKNOWN11	11
+#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
+#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
+#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
+
+
+#endif /* _UAPI_LINUX_SOUND_H */
diff --git a/include/uapi/linux/soundcard.h b/include/uapi/linux/soundcard.h
new file mode 100644
index 0000000000000000000000000000000000000000..f3b21f989872b558806b7a417e71d001fc8d0b6e
--- /dev/null
+++ b/include/uapi/linux/soundcard.h
@@ -0,0 +1,1282 @@
+/*
+ * Copyright by Hannu Savolainen 1993-1997
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+#ifndef _UAPISOUNDCARD_H
+#define _UAPISOUNDCARD_H
+
+
+/*
+ * OSS interface version. With versions earlier than 3.6 this value is
+ * an integer with value less than 361. In versions 3.6 and later
+ * it's a six digit hexadecimal value. For example value
+ * of 0x030600 represents OSS version 3.6.0.
+ * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
+ * the currently active driver.
+ */
+#define SOUND_VERSION	0x030802
+#define OPEN_SOUND_SYSTEM
+
+/* In Linux we need to be prepared for cross compiling */
+#include <linux/ioctl.h>
+
+/* Endian macros. */
+#ifndef __KERNEL__
+#  include <endian.h>
+#endif
+
+/*
+ *	Supported card ID numbers (Should be somewhere else?)
+ */
+
+#define SNDCARD_ADLIB		1
+#define SNDCARD_SB		2
+#define SNDCARD_PAS		3
+#define SNDCARD_GUS		4
+#define SNDCARD_MPU401		5
+#define SNDCARD_SB16		6
+#define SNDCARD_SB16MIDI	7
+#define SNDCARD_UART6850	8
+#define SNDCARD_GUS16		9
+#define SNDCARD_MSS		10
+#define SNDCARD_PSS     	11
+#define SNDCARD_SSCAPE		12
+#define SNDCARD_PSS_MPU     	13
+#define SNDCARD_PSS_MSS     	14
+#define SNDCARD_SSCAPE_MSS	15
+#define SNDCARD_TRXPRO		16
+#define SNDCARD_TRXPRO_SB	17
+#define SNDCARD_TRXPRO_MPU	18
+#define SNDCARD_MAD16		19
+#define SNDCARD_MAD16_MPU	20
+#define SNDCARD_CS4232		21
+#define SNDCARD_CS4232_MPU	22
+#define SNDCARD_MAUI		23
+#define SNDCARD_PSEUDO_MSS	24
+#define SNDCARD_GUSPNP		25
+#define SNDCARD_UART401		26
+/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
+
+/***********************************
+ * IOCTL Commands for /dev/sequencer
+ */
+
+#ifndef _SIOWR
+#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
+/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
+#define	SIOCPARM_MASK	IOCPARM_MASK
+#define	SIOC_VOID	IOC_VOID
+#define	SIOC_OUT	IOC_OUT
+#define	SIOC_IN		IOC_IN
+#define	SIOC_INOUT	IOC_INOUT
+#define _SIOC_SIZE	_IOC_SIZE
+#define _SIOC_DIR	_IOC_DIR
+#define _SIOC_NONE	_IOC_NONE
+#define _SIOC_READ	_IOC_READ
+#define _SIOC_WRITE	_IOC_WRITE
+#define	_SIO		_IO
+#define	_SIOR		_IOR
+#define	_SIOW		_IOW
+#define	_SIOWR		_IOWR
+#else
+
+/* Ioctl's have the command encoded in the lower word,
+ * and the size of any in or out parameters in the upper
+ * word.  The high 2 bits of the upper word are used
+ * to encode the in/out status of the parameter; for now
+ * we restrict parameters to at most 8191 bytes.
+ */
+/* #define	SIOCTYPE		(0xff<<8) */
+#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
+#define	SIOC_VOID	0x00000000	/* no parameters */
+#define	SIOC_OUT	0x20000000	/* copy out parameters */
+#define	SIOC_IN		0x40000000	/* copy in parameters */
+#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
+/* the 0x20000000 is so we can distinguish new ioctl's from old */
+#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
+#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+/* this should be _SIORW, but stdio got there first */
+#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
+#define _SIOC_DIR(x)	(x & 0xf0000000)
+#define _SIOC_NONE	SIOC_VOID
+#define _SIOC_READ	SIOC_OUT
+#define _SIOC_WRITE	SIOC_IN
+#  endif /* _IOWR */
+#endif  /* !_SIOWR */
+
+#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
+#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
+#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
+#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
+#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
+#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
+#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
+#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
+#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
+#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
+#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
+#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
+#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
+#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
+#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
+#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
+#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
+#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
+#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
+#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
+#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
+#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
+
+typedef struct synth_control
+{
+	int devno;	/* Synthesizer # */
+	char data[4000]; /* Device spesific command/data record */
+}synth_control;
+
+typedef struct remove_sample
+{
+	int devno;	/* Synthesizer # */
+	int bankno;	/* MIDI bank # (0=General MIDI) */
+	int instrno;	/* MIDI instrument number */
+} remove_sample;
+
+typedef struct seq_event_rec {
+		unsigned char arr[8];
+} seq_event_rec;
+
+#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
+#define SNDCTL_TMR_START		_SIO  ('T', 2)
+#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
+#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
+#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
+#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
+#	define TMR_INTERNAL		0x00000001
+#	define TMR_EXTERNAL		0x00000002
+#		define TMR_MODE_MIDI	0x00000010
+#		define TMR_MODE_FSK	0x00000020
+#		define TMR_MODE_CLS	0x00000040
+#		define TMR_MODE_SMPTE	0x00000080
+#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
+#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
+
+/*
+ * Some big endian/little endian handling macros
+ */
+
+#define _LINUX_PATCHKEY_H_INDIRECT
+#include <linux/patchkey.h>
+#undef _LINUX_PATCHKEY_H_INDIRECT
+
+#if !defined(__KERNEL__)
+# if defined(__BYTE_ORDER)
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#    define AFMT_S16_NE AFMT_S16_BE
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#    define AFMT_S16_NE AFMT_S16_LE
+#  else
+#    error "could not determine byte order"
+#  endif
+# endif
+#endif
+
+/*
+ *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
+ *	The following patch_info structure has been designed to support
+ *	Gravis UltraSound. It tries to be universal format for uploading
+ *	sample based patches but is probably too limited.
+ *
+ *      (PBD) As Hannu guessed, the GUS structure is too limited for 
+ *      the WaveFront, but this is the right place for a constant definition.
+ */
+
+struct patch_info {
+		unsigned short key;		/* Use WAVE_PATCH here */
+#define WAVE_PATCH	   _PATCHKEY(0x04)
+#define GUS_PATCH	   WAVE_PATCH
+#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
+
+		short device_no;	/* Synthesizer number */
+		short instr_no;		/* Midi pgm# */
+
+		unsigned int mode;
+/*
+ * The least significant byte has the same format than the GUS .PAT
+ * files
+ */
+#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
+#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
+#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
+#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
+#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
+#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
+#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
+#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
+				/* 	(use the env_rate/env_offs fields). */
+/* Linux specific bits */
+#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
+#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
+#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
+#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
+/* Reserved bits */
+#define WAVE_ROM	0x40000000	/* For future use */
+#define WAVE_MULAW	0x20000000	/* For future use */
+/* Other bits must be zeroed */
+
+		int len;	/* Size of the wave data in bytes */
+		int loop_start, loop_end; /* Byte offsets from the beginning */
+
+/* 
+ * The base_freq and base_note fields are used when computing the
+ * playback speed for a note. The base_note defines the tone frequency
+ * which is heard if the sample is played using the base_freq as the
+ * playback speed.
+ *
+ * The low_note and high_note fields define the minimum and maximum note
+ * frequencies for which this sample is valid. It is possible to define
+ * more than one samples for an instrument number at the same time. The
+ * low_note and high_note fields are used to select the most suitable one.
+ *
+ * The fields base_note, high_note and low_note should contain
+ * the note frequency multiplied by 1000. For example value for the
+ * middle A is 440*1000.
+ */
+
+		unsigned int base_freq;
+		unsigned int base_note;
+		unsigned int high_note;
+		unsigned int low_note;
+		int panning;	/* -128=left, 127=right */
+		int detuning;
+
+/*	New fields introduced in version 1.99.5	*/
+
+       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
+		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
+		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
+
+	/* 
+	 * The tremolo, vibrato and scale info are not supported yet.
+	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
+	 * WAVE_SCALE
+	 */
+
+		unsigned char	tremolo_sweep;
+		unsigned char	tremolo_rate;
+		unsigned char	tremolo_depth;
+	
+		unsigned char	vibrato_sweep;
+		unsigned char	vibrato_rate;
+		unsigned char	vibrato_depth;
+
+		int		scale_frequency;
+		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
+	
+	        int		volume;
+		int		fractions;
+		int		reserved1;
+	        int		spare[2];
+		char data[1];	/* The waveform data starts here */
+	};
+
+struct sysex_info {
+		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
+#define SYSEX_PATCH	_PATCHKEY(0x05)
+#define MAUI_PATCH	_PATCHKEY(0x06)
+		short device_no;	/* Synthesizer number */
+		int len;	/* Size of the sysex data in bytes */
+		unsigned char data[1];	/* Sysex data starts here */
+	};
+
+/*
+ * /dev/sequencer input events.
+ *
+ * The data written to the /dev/sequencer is a stream of events. Events
+ * are records of 4 or 8 bytes. The first byte defines the size. 
+ * Any number of events can be written with a write call. There
+ * is a set of macros for sending these events. Use these macros if you
+ * want to maximize portability of your program.
+ *
+ * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
+ * (All input events are currently 4 bytes long. Be prepared to support
+ * 8 byte events also. If you receive any event having first byte >= 128,
+ * it's a 8 byte event.
+ *
+ * The events are documented at the end of this file.
+ *
+ * Normal events (4 bytes)
+ * There is also a 8 byte version of most of the 4 byte events. The
+ * 8 byte one is recommended.
+ */
+#define SEQ_NOTEOFF		0
+#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
+#define SEQ_NOTEON		1
+#define	SEQ_FMNOTEON		SEQ_NOTEON
+#define SEQ_WAIT		TMR_WAIT_ABS
+#define SEQ_PGMCHANGE		3
+#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
+#define SEQ_SYNCTIMER		TMR_START
+#define SEQ_MIDIPUTC		5
+#define SEQ_DRUMON		6	/*** OBSOLETE ***/
+#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
+#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
+#define SEQ_AFTERTOUCH		9
+#define SEQ_CONTROLLER		10
+
+/*******************************************
+ *	Midi controller numbers
+ *******************************************
+ * Controllers 0 to 31 (0x00 to 0x1f) and
+ * 32 to 63 (0x20 to 0x3f) are continuous
+ * controllers.
+ * In the MIDI 1.0 these controllers are sent using
+ * two messages. Controller numbers 0 to 31 are used
+ * to send the MSB and the controller numbers 32 to 63
+ * are for the LSB. Note that just 7 bits are used in MIDI bytes.
+ */
+
+#define	   CTL_BANK_SELECT		0x00
+#define	   CTL_MODWHEEL			0x01
+#define    CTL_BREATH			0x02
+/*		undefined		0x03 */
+#define    CTL_FOOT			0x04
+#define    CTL_PORTAMENTO_TIME		0x05
+#define    CTL_DATA_ENTRY		0x06
+#define    CTL_MAIN_VOLUME		0x07
+#define    CTL_BALANCE			0x08
+/*		undefined		0x09 */
+#define    CTL_PAN			0x0a
+#define    CTL_EXPRESSION		0x0b
+/*		undefined		0x0c */
+/*		undefined		0x0d */
+/*		undefined		0x0e */
+/*		undefined		0x0f */
+#define    CTL_GENERAL_PURPOSE1	0x10
+#define    CTL_GENERAL_PURPOSE2	0x11
+#define    CTL_GENERAL_PURPOSE3	0x12
+#define    CTL_GENERAL_PURPOSE4	0x13
+/*		undefined		0x14 - 0x1f */
+
+/*		undefined		0x20 */
+/* The controller numbers 0x21 to 0x3f are reserved for the */
+/* least significant bytes of the controllers 0x00 to 0x1f. */
+/* These controllers are not recognised by the driver. */
+
+/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
+/* 0=OFF and 127=ON (intermediate values are possible) */
+#define    CTL_DAMPER_PEDAL		0x40
+#define    CTL_SUSTAIN			0x40	/* Alias */
+#define    CTL_HOLD			0x40	/* Alias */
+#define    CTL_PORTAMENTO		0x41
+#define    CTL_SOSTENUTO		0x42
+#define    CTL_SOFT_PEDAL		0x43
+/*		undefined		0x44 */
+#define    CTL_HOLD2			0x45
+/*		undefined		0x46 - 0x4f */
+
+#define    CTL_GENERAL_PURPOSE5	0x50
+#define    CTL_GENERAL_PURPOSE6	0x51
+#define    CTL_GENERAL_PURPOSE7	0x52
+#define    CTL_GENERAL_PURPOSE8	0x53
+/*		undefined		0x54 - 0x5a */
+#define    CTL_EXT_EFF_DEPTH		0x5b
+#define    CTL_TREMOLO_DEPTH		0x5c
+#define    CTL_CHORUS_DEPTH		0x5d
+#define    CTL_DETUNE_DEPTH		0x5e
+#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
+#define    CTL_PHASER_DEPTH		0x5f
+#define    CTL_DATA_INCREMENT		0x60
+#define    CTL_DATA_DECREMENT		0x61
+#define    CTL_NONREG_PARM_NUM_LSB	0x62
+#define    CTL_NONREG_PARM_NUM_MSB	0x63
+#define    CTL_REGIST_PARM_NUM_LSB	0x64
+#define    CTL_REGIST_PARM_NUM_MSB	0x65
+/*		undefined		0x66 - 0x78 */
+/*		reserved		0x79 - 0x7f */
+
+/* Pseudo controllers (not midi compatible) */
+#define    CTRL_PITCH_BENDER		255
+#define    CTRL_PITCH_BENDER_RANGE	254
+#define    CTRL_EXPRESSION		253	/* Obsolete */
+#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
+#define SEQ_BALANCE		11
+#define SEQ_VOLMODE             12
+
+/*
+ * Volume mode decides how volumes are used
+ */
+
+#define VOL_METHOD_ADAGIO	1
+#define VOL_METHOD_LINEAR	2
+
+/*
+ * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
+ *	 input events.
+ */
+
+/*
+ * Event codes 0xf0 to 0xfc are reserved for future extensions.
+ */
+
+#define SEQ_FULLSIZE		0xfd	/* Long events */
+/*
+ *	SEQ_FULLSIZE events are used for loading patches/samples to the
+ *	synthesizer devices. These events are passed directly to the driver
+ *	of the associated synthesizer device. There is no limit to the size
+ *	of the extended events. These events are not queued but executed
+ *	immediately when the write() is called (execution can take several
+ *	seconds of time). 
+ *
+ *	When a SEQ_FULLSIZE message is written to the device, it must
+ *	be written using exactly one write() call. Other events cannot
+ *	be mixed to the same write.
+ *	
+ *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
+ *	/dev/sequencer. Don't write other data together with the instrument structure
+ *	Set the key field of the structure to FM_PATCH. The device field is used to
+ *	route the patch to the corresponding device.
+ *
+ *	For wave table use struct patch_info. Initialize the key field
+ *      to WAVE_PATCH.
+ */
+#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
+#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
+
+/*
+ * Record for FM patches
+ */
+
+typedef unsigned char sbi_instr_data[32];
+
+struct sbi_instrument {
+		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
+#define FM_PATCH	_PATCHKEY(0x01)
+#define OPL3_PATCH	_PATCHKEY(0x03)
+		short		device;		/*	Synth# (0-4)	*/
+		int 		channel;	/*	Program# to be initialized 	*/
+		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
+	};
+
+struct synth_info {	/* Read only */
+		char	name[30];
+		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		int	synth_type;
+#define SYNTH_TYPE_FM			0
+#define SYNTH_TYPE_SAMPLE		1
+#define SYNTH_TYPE_MIDI			2	/* Midi interface */
+
+		int	synth_subtype;
+#define FM_TYPE_ADLIB			0x00
+#define FM_TYPE_OPL3			0x01
+#define MIDI_TYPE_MPU401		0x401
+
+#define SAMPLE_TYPE_BASIC		0x10
+#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
+#define SAMPLE_TYPE_WAVEFRONT           0x11
+
+		int	perc_mode;	/* No longer supported */
+		int	nr_voices;
+		int	nr_drums;	/* Obsolete field */
+		int	instr_bank_size;
+		unsigned int	capabilities;	
+#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
+#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
+#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
+		int	dummies[19];	/* Reserve space */
+	};
+
+struct sound_timer_info {
+		char name[32];
+		int caps;
+	};
+
+#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
+
+struct midi_info {
+		char		name[30];
+		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		unsigned int	capabilities;	/* To be defined later */
+		int		dev_type;
+		int		dummies[18];	/* Reserve space */
+	};
+
+/********************************************
+ * ioctl commands for the /dev/midi##
+ */
+typedef struct {
+		unsigned char cmd;
+		char nr_args, nr_returns;
+		unsigned char data[30];
+	} mpu_command_rec;
+
+#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
+#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
+#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
+
+/********************************************
+ * IOCTL commands for /dev/dsp and /dev/audio
+ */
+
+#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
+#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
+#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
+#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
+#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
+#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
+#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
+#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
+#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
+#define SNDCTL_DSP_POST			_SIO  ('P', 8)
+#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
+#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
+
+/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
+#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
+#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
+#	define AFMT_QUERY		0x00000000	/* Return current fmt */
+#	define AFMT_MU_LAW		0x00000001
+#	define AFMT_A_LAW		0x00000002
+#	define AFMT_IMA_ADPCM		0x00000004
+#	define AFMT_U8			0x00000008
+#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
+#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
+#	define AFMT_S8			0x00000040
+#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
+#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
+#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
+#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
+
+/*
+ * Buffer status queries.
+ */
+typedef struct audio_buf_info {
+			int fragments;	/* # of available fragments (partially usend ones not counted) */
+			int fragstotal;	/* Total # of fragments allocated */
+			int fragsize;	/* Size of a fragment in bytes */
+
+			int bytes;	/* Available space in bytes (includes partially used fragments) */
+			/* Note! 'bytes' could be more than fragments*fragsize */
+		} audio_buf_info;
+
+#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
+#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
+#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
+#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
+#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
+#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
+#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
+#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
+							/* internal buffers which may */
+							/* cause some delays and */
+							/* decrease precision of timing */
+#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
+							/* Sometimes it's a DSP */
+							/* but usually not */
+#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
+#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
+#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
+#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
+
+
+#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
+#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
+#	define PCM_ENABLE_INPUT		0x00000001
+#	define PCM_ENABLE_OUTPUT		0x00000002
+
+typedef struct count_info {
+		int bytes;	/* Total # of bytes processed */
+		int blocks;	/* # of fragment transitions since last time */
+		int ptr;	/* Current DMA pointer value */
+	} count_info;
+
+#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
+#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
+
+typedef struct buffmem_desc {
+		unsigned *buffer;
+		int size;
+	} buffmem_desc;
+#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
+#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
+#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
+#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
+#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
+
+#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
+#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
+#	define DSP_BIND_QUERY		0x00000000
+#	define DSP_BIND_FRONT		0x00000001
+#	define DSP_BIND_SURR		0x00000002
+#	define DSP_BIND_CENTER_LFE	0x00000004
+#	define DSP_BIND_HANDSET		0x00000008
+#	define DSP_BIND_MIC		0x00000010
+#	define DSP_BIND_MODEM1		0x00000020
+#	define DSP_BIND_MODEM2		0x00000040
+#	define DSP_BIND_I2S		0x00000080
+#	define DSP_BIND_SPDIF		0x00000100
+
+#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
+#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
+#	define SPDIF_PRO	0x0001
+#	define SPDIF_N_AUD	0x0002
+#	define SPDIF_COPY	0x0004
+#	define SPDIF_PRE	0x0008
+#	define SPDIF_CC		0x07f0
+#	define SPDIF_L		0x0800
+#	define SPDIF_DRS	0x4000
+#	define SPDIF_V		0x8000
+
+/*
+ * Application's profile defines the way how playback underrun situations should be handled.
+ * 
+ *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
+ *	playback buffer whenever an underrun occurs. This consumes some time
+ *	prevents looping the existing buffer.
+ *	APF_CPUINTENS is intended to be set by CPU intensive applications which
+ *	are likely to run out of time occasionally. In this mode the buffer cleanup is
+ *	disabled which saves CPU time but also let's the previous buffer content to
+ *	be played during the "pause" after the underrun.
+ */
+#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
+#define	  APF_NORMAL	0	/* Normal applications */
+#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
+#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
+
+#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
+#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
+#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
+#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
+
+/* Some alias names */
+#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
+#define SOUND_PCM_POST			SNDCTL_DSP_POST
+#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
+#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
+#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
+#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
+#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
+#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
+#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
+#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
+#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
+#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
+#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
+#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
+#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
+#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
+#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
+#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
+
+/*
+ * ioctl calls to be used in communication with coprocessors and
+ * DSP chips.
+ */
+
+typedef struct copr_buffer {
+		int command;	/* Set to 0 if not used */
+		int flags;
+#define CPF_NONE		0x0000
+#define CPF_FIRST		0x0001	/* First block */
+#define CPF_LAST		0x0002	/* Last block */
+		int len;
+		int offs;	/* If required by the device (0 if not used) */
+
+		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
+	} copr_buffer;
+
+typedef struct copr_debug_buf {
+		int command;	/* Used internally. Set to 0 */
+		int parm1;
+		int parm2;
+		int flags;	
+		int len;	/* Length of data in bytes */
+	} copr_debug_buf;
+
+typedef struct copr_msg {
+		int len;
+		unsigned char data[4000];
+	} copr_msg;
+
+#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
+#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
+#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
+#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
+#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
+#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
+#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
+#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
+#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
+#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
+
+/*********************************************
+ * IOCTL commands for /dev/mixer
+ */
+	
+/* 
+ * Mixer devices
+ *
+ * There can be up to 20 different analog mixer channels. The
+ * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
+ * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
+ * the devices supported by the particular mixer.
+ */
+
+#define SOUND_MIXER_NRDEVICES	25
+#define SOUND_MIXER_VOLUME	0
+#define SOUND_MIXER_BASS	1
+#define SOUND_MIXER_TREBLE	2
+#define SOUND_MIXER_SYNTH	3
+#define SOUND_MIXER_PCM		4
+#define SOUND_MIXER_SPEAKER	5
+#define SOUND_MIXER_LINE	6
+#define SOUND_MIXER_MIC		7
+#define SOUND_MIXER_CD		8
+#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
+#define SOUND_MIXER_ALTPCM	10
+#define SOUND_MIXER_RECLEV	11	/* Recording level */
+#define SOUND_MIXER_IGAIN	12	/* Input gain */
+#define SOUND_MIXER_OGAIN	13	/* Output gain */
+/* 
+ * The AD1848 codec and compatibles have three line level inputs
+ * (line, aux1 and aux2). Since each card manufacturer have assigned
+ * different meanings to these inputs, it's inpractical to assign
+ * specific meanings (line, cd, synth etc.) to them.
+ */
+#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
+#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
+#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
+#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
+#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
+#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
+#define SOUND_MIXER_PHONEIN	20	/* Phone input */
+#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
+#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
+#define SOUND_MIXER_RADIO	23	/* Radio in */
+#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
+
+/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
+/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
+#define SOUND_ONOFF_MIN		28
+#define SOUND_ONOFF_MAX		30
+
+/* Note!	Number 31 cannot be used since the sign bit is reserved */
+#define SOUND_MIXER_NONE	31
+
+/*
+ * The following unsupported macros are no longer functional.
+ * Use SOUND_MIXER_PRIVATE# macros in future.
+ */
+#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
+#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
+#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
+
+
+#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
+				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
+				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
+				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
+
+#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
+				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
+				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
+				 "phin", "phout", "video", "radio", "monitor"}
+
+/*	Device bitmask identifiers	*/
+
+#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
+#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
+#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
+#define SOUND_MIXER_CAPS	0xfc
+#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
+#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
+#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
+#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
+
+/*	Device mask bits	*/
+
+#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
+#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
+#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
+#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
+#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
+#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
+#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
+#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
+#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
+#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
+#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
+#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
+#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
+#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
+#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
+#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
+#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
+#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
+#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
+#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
+#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
+#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
+#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
+#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
+#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
+
+/* Obsolete macros */
+#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
+#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
+#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
+
+#define MIXER_READ(dev)		_SIOR('M', dev, int)
+#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
+#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
+#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
+#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
+#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
+#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
+#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
+#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
+#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
+#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
+
+#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
+#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
+#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
+#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
+#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
+#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
+#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
+
+typedef struct mixer_info
+{
+  char id[16];
+  char name[32];
+  int  modify_counter;
+  int fillers[10];
+} mixer_info;
+
+typedef struct _old_mixer_info /* Obsolete */
+{
+  char id[16];
+  char name[32];
+} _old_mixer_info;
+
+#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
+#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
+
+/*
+ * A mechanism for accessing "proprietary" mixer features. This method
+ * permits passing 128 bytes of arbitrary data between a mixer application
+ * and the mixer driver. Interpretation of the record is defined by
+ * the particular mixer driver.
+ */
+typedef unsigned char mixer_record[128];
+
+#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
+
+/*
+ * Two ioctls for special souncard function
+ */
+#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
+#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
+
+/*
+ * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
+ * These features can be used when accessing device specific features.
+ */
+#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
+#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
+#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
+#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
+#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
+
+/*
+ * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
+ * for querying current mixer settings from the driver and for loading
+ * default volume settings _prior_ activating the mixer (loading
+ * doesn't affect current state of the mixer hardware). These calls
+ * are for internal use only.
+ */
+
+typedef struct mixer_vol_table {
+  int num;	/* Index to volume table */
+  char name[32];
+  int levels[32];
+} mixer_vol_table;
+
+#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
+#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
+
+/* 
+ * An ioctl for identifying the driver version. It will return value
+ * of the SOUND_VERSION macro used when compiling the driver.
+ * This call was introduced in OSS version 3.6 and it will not work
+ * with earlier versions (returns EINVAL).
+ */
+#define OSS_GETVERSION			_SIOR ('M', 118, int)
+
+/*
+ * Level 2 event types for /dev/sequencer
+ */
+
+/*
+ * The 4 most significant bits of byte 0 specify the class of
+ * the event: 
+ *
+ *	0x8X = system level events,
+ *	0x9X = device/port specific events, event[1] = device/port,
+ *		The last 4 bits give the subtype:
+ *			0x02	= Channel event (event[3] = chn).
+ *			0x01	= note event (event[4] = note).
+ *			(0x01 is not used alone but always with bit 0x02).
+ *	       event[2] = MIDI message code (0x80=note off etc.)
+ *
+ */
+
+#define EV_SEQ_LOCAL		0x80
+#define EV_TIMING		0x81
+#define EV_CHN_COMMON		0x92
+#define EV_CHN_VOICE		0x93
+#define EV_SYSEX		0x94
+/*
+ * Event types 200 to 220 are reserved for application use.
+ * These numbers will not be used by the driver.
+ */
+
+/*
+ * Events for event type EV_CHN_VOICE
+ */
+
+#define MIDI_NOTEOFF		0x80
+#define MIDI_NOTEON		0x90
+#define MIDI_KEY_PRESSURE	0xA0
+
+/*
+ * Events for event type EV_CHN_COMMON
+ */
+
+#define MIDI_CTL_CHANGE		0xB0
+#define MIDI_PGM_CHANGE		0xC0
+#define MIDI_CHN_PRESSURE	0xD0
+#define MIDI_PITCH_BEND		0xE0
+
+#define MIDI_SYSTEM_PREFIX	0xF0
+
+/*
+ * Timer event types
+ */
+#define TMR_WAIT_REL		1	/* Time relative to the prev time */
+#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
+#define TMR_STOP		3
+#define TMR_START		4
+#define TMR_CONTINUE		5
+#define TMR_TEMPO		6
+#define TMR_ECHO		8
+#define TMR_CLOCK		9	/* MIDI clock */
+#define TMR_SPP			10	/* Song position pointer */
+#define TMR_TIMESIG		11	/* Time signature */
+
+/*
+ *	Local event types
+ */
+#define LOCL_STARTAUDIO		1
+
+#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
+/*
+ *	Some convenience macros to simplify programming of the
+ *	/dev/sequencer interface
+ *
+ *	This is a legacy interface for applications written against
+ *	the OSSlib-3.8 style interface. It is no longer possible
+ *	to actually link against OSSlib with this header, but we
+ *	still provide these macros for programs using them.
+ *
+ *	If you want to use OSSlib, it is recommended that you get
+ *	the GPL version of OSS-4.x and build against that version
+ *	of the header.
+ *
+ *	We redefine the extern keyword so that make headers_check
+ *	does not complain about SEQ_USE_EXTBUF.
+ */
+#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
+
+void seqbuf_dump(void);	/* This function must be provided by programs */
+
+#define SEQ_PM_DEFINES int __foo_bar___
+
+#define SEQ_LOAD_GMINSTR(dev, instr)
+#define SEQ_LOAD_GMDRUM(dev, drum)
+
+#define _SEQ_EXTERN extern
+#define SEQ_USE_EXTBUF() \
+		_SEQ_EXTERN unsigned char _seqbuf[]; \
+		_SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
+
+#ifndef USE_SIMPLE_MACROS
+/* Sample seqbuf_dump() implementation:
+ *
+ *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
+ *
+ *	int seqfd;		-- The file descriptor for /dev/sequencer.
+ *
+ *	void
+ *	seqbuf_dump ()
+ *	{
+ *	  if (_seqbufptr)
+ *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
+ *	      {
+ *		perror ("write /dev/sequencer");
+ *		exit (-1);
+ *	      }
+ *	  _seqbufptr = 0;
+ *	}
+ */
+
+#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
+#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
+#define _SEQ_ADVBUF(len)		_seqbufptr += len
+#define SEQ_DUMPBUF			seqbuf_dump
+#else
+/*
+ * This variation of the sequencer macros is used just to format one event
+ * using fixed buffer.
+ * 
+ * The program using the macro library must define the following macros before
+ * using this library.
+ *
+ * #define _seqbuf 		 name of the buffer (unsigned char[]) 
+ * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
+ *				 size of the event, this macro can be used.
+ *				 Otherwise this must be defined as empty.
+ * #define _seqbufptr		 Define the name of index variable or 0 if
+ *				 not required. 
+ */
+#define _SEQ_NEEDBUF(len)	/* empty */
+#endif
+
+#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (mode);\
+					_seqbuf[_seqbufptr+4] = 0;\
+					_seqbuf[_seqbufptr+5] = 0;\
+					_seqbuf[_seqbufptr+6] = 0;\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+/*
+ * Midi voice messages
+ */
+
+#define _CHN_VOICE(dev, event, chn, note, parm) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (note);\
+					_seqbuf[_seqbufptr+5] = (parm);\
+					_seqbuf[_seqbufptr+6] = (0);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
+
+#define SEQ_STOP_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
+
+#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
+		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
+
+/*
+ * Midi channel messages
+ */
+
+#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (p1);\
+					_seqbuf[_seqbufptr+5] = (p2);\
+					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
+					_SEQ_ADVBUF(8);}
+/*
+ * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
+ * sending any MIDI bytes but it's absolutely not possible. Trying to do
+ * so _will_ cause problems with MPU401 intelligent mode).
+ *
+ * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
+ * sent by calling SEQ_SYSEX() several times (there must be no other events
+ * between them). First sysex fragment must have 0xf0 in the first byte
+ * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
+ * between these sysex start and end markers cannot be larger than 0x7f. Also
+ * lengths of each fragments (except the last one) must be 6.
+ *
+ * Breaking the above rules may work with some MIDI ports but is likely to
+ * cause fatal problems with some other devices (such as MPU401).
+ */
+#define SEQ_SYSEX(dev, buf, len) \
+					{int ii, ll=(len); \
+					 unsigned char *bufp=buf;\
+					 if (ll>6)ll=6;\
+					_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_SYSEX;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					for(ii=0;ii<ll;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
+					for(ii=ll;ii<6;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
+		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
+
+#define SEQ_SET_PATCH SEQ_PGM_CHANGE
+#define SEQ_PGM_CHANGE(dev, chn, patch) \
+		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
+
+#define SEQ_CONTROL(dev, chn, controller, value) \
+		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
+
+#define SEQ_BENDER(dev, chn, value) \
+		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
+
+
+#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (voice);\
+					_seqbuf[_seqbufptr+4] = (controller);\
+					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
+					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+/*
+ * The following 5 macros are incorrectly implemented and obsolete.
+ * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
+ */
+#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
+#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
+#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
+#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
+#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
+
+/*
+ * Timing and synchronization macros
+ */
+
+#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
+#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
+#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
+#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
+#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
+#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
+#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
+#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
+#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
+
+/*
+ * Local control events
+ */
+
+#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
+/*
+ * Events for the level 1 interface only 
+ */
+
+#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
+					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
+					_seqbuf[_seqbufptr+1] = (byte);\
+					_seqbuf[_seqbufptr+2] = (device);\
+					_seqbuf[_seqbufptr+3] = 0;\
+					_SEQ_ADVBUF(4);}
+
+/*
+ * Patch loading.
+ */
+#define SEQ_WRPATCH(patchx, len) \
+		{if (_seqbufptr) SEQ_DUMPBUF();\
+		 if (write(seqfd, (char*)(patchx), len)==-1) \
+		    perror("Write patch: /dev/sequencer");}
+#define SEQ_WRPATCH2(patchx, len) \
+		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
+
+#endif
+#endif /* _UAPISOUNDCARD_H */
diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h
new file mode 100644
index 0000000000000000000000000000000000000000..7fec7e36d9217dffa3e1d6cb83f6c4d54839aded
--- /dev/null
+++ b/include/uapi/linux/stat.h
@@ -0,0 +1,45 @@
+#ifndef _UAPI_LINUX_STAT_H
+#define _UAPI_LINUX_STAT_H
+
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#define S_IFMT  00170000
+#define S_IFSOCK 0140000
+#define S_IFLNK	 0120000
+#define S_IFREG  0100000
+#define S_IFBLK  0060000
+#define S_IFDIR  0040000
+#define S_IFCHR  0020000
+#define S_IFIFO  0010000
+#define S_ISUID  0004000
+#define S_ISGID  0002000
+#define S_ISVTX  0001000
+
+#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
+#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
+#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
+#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
+#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
+#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
+#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
+
+#define S_IRWXU 00700
+#define S_IRUSR 00400
+#define S_IWUSR 00200
+#define S_IXUSR 00100
+
+#define S_IRWXG 00070
+#define S_IRGRP 00040
+#define S_IWGRP 00020
+#define S_IXGRP 00010
+
+#define S_IRWXO 00007
+#define S_IROTH 00004
+#define S_IWOTH 00002
+#define S_IXOTH 00001
+
+#endif
+
+
+#endif /* _UAPI_LINUX_STAT_H */
diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h
new file mode 100644
index 0000000000000000000000000000000000000000..aa9f104287438aa32c622d006d4d30794b9b220b
--- /dev/null
+++ b/include/uapi/linux/stddef.h
@@ -0,0 +1 @@
+#include <linux/compiler.h>
diff --git a/include/uapi/linux/string.h b/include/uapi/linux/string.h
new file mode 100644
index 0000000000000000000000000000000000000000..e32e545cff5a44298a5dcfa554a4ce64652827b3
--- /dev/null
+++ b/include/uapi/linux/string.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI_LINUX_STRING_H_
+#define _UAPI_LINUX_STRING_H_
+
+/* We don't want strings.h stuff being used by user stuff by accident */
+
+#ifndef __KERNEL__
+#include <string.h>
+#endif /* __KERNEL__ */
+#endif /* _UAPI_LINUX_STRING_H_ */
diff --git a/include/linux/suspend_ioctls.h b/include/uapi/linux/suspend_ioctls.h
similarity index 100%
rename from include/linux/suspend_ioctls.h
rename to include/uapi/linux/suspend_ioctls.h
diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h
new file mode 100644
index 0000000000000000000000000000000000000000..e811474724c210cd658bcf1efb110032ddd7d4b7
--- /dev/null
+++ b/include/uapi/linux/swab.h
@@ -0,0 +1,282 @@
+#ifndef _UAPI_LINUX_SWAB_H
+#define _UAPI_LINUX_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/swab.h>
+
+/*
+ * casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define ___constant_swab16(x) ((__u16)(				\
+	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
+	(((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define ___constant_swab32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
+	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
+	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
+	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define ___constant_swab64(x) ((__u64)(				\
+	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
+	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
+	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
+	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
+	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
+	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
+	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
+	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define ___constant_swahw32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
+	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
+
+#define ___constant_swahb32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
+	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
+
+/*
+ * Implement the following as inlines, but define the interface using
+ * macros to allow constant folding when possible:
+ * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
+ */
+
+static inline __attribute_const__ __u16 __fswab16(__u16 val)
+{
+#ifdef __arch_swab16
+	return __arch_swab16(val);
+#else
+	return ___constant_swab16(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswab32(__u32 val)
+{
+#ifdef __arch_swab32
+	return __arch_swab32(val);
+#else
+	return ___constant_swab32(val);
+#endif
+}
+
+static inline __attribute_const__ __u64 __fswab64(__u64 val)
+{
+#ifdef __arch_swab64
+	return __arch_swab64(val);
+#elif defined(__SWAB_64_THRU_32__)
+	__u32 h = val >> 32;
+	__u32 l = val & ((1ULL << 32) - 1);
+	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
+#else
+	return ___constant_swab64(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahw32(__u32 val)
+{
+#ifdef __arch_swahw32
+	return __arch_swahw32(val);
+#else
+	return ___constant_swahw32(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahb32(__u32 val)
+{
+#ifdef __arch_swahb32
+	return __arch_swahb32(val);
+#else
+	return ___constant_swahb32(val);
+#endif
+}
+
+/**
+ * __swab16 - return a byteswapped 16-bit value
+ * @x: value to byteswap
+ */
+#define __swab16(x)				\
+	(__builtin_constant_p((__u16)(x)) ?	\
+	___constant_swab16(x) :			\
+	__fswab16(x))
+
+/**
+ * __swab32 - return a byteswapped 32-bit value
+ * @x: value to byteswap
+ */
+#define __swab32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swab32(x) :			\
+	__fswab32(x))
+
+/**
+ * __swab64 - return a byteswapped 64-bit value
+ * @x: value to byteswap
+ */
+#define __swab64(x)				\
+	(__builtin_constant_p((__u64)(x)) ?	\
+	___constant_swab64(x) :			\
+	__fswab64(x))
+
+/**
+ * __swahw32 - return a word-swapped 32-bit value
+ * @x: value to wordswap
+ *
+ * __swahw32(0x12340000) is 0x00001234
+ */
+#define __swahw32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahw32(x) :		\
+	__fswahw32(x))
+
+/**
+ * __swahb32 - return a high and low byte-swapped 32-bit value
+ * @x: value to byteswap
+ *
+ * __swahb32(0x12345678) is 0x34127856
+ */
+#define __swahb32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahb32(x) :		\
+	__fswahb32(x))
+
+/**
+ * __swab16p - return a byteswapped 16-bit value from a pointer
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline __u16 __swab16p(const __u16 *p)
+{
+#ifdef __arch_swab16p
+	return __arch_swab16p(p);
+#else
+	return __swab16(*p);
+#endif
+}
+
+/**
+ * __swab32p - return a byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline __u32 __swab32p(const __u32 *p)
+{
+#ifdef __arch_swab32p
+	return __arch_swab32p(p);
+#else
+	return __swab32(*p);
+#endif
+}
+
+/**
+ * __swab64p - return a byteswapped 64-bit value from a pointer
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline __u64 __swab64p(const __u64 *p)
+{
+#ifdef __arch_swab64p
+	return __arch_swab64p(p);
+#else
+	return __swab64(*p);
+#endif
+}
+
+/**
+ * __swahw32p - return a wordswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping.
+ */
+static inline __u32 __swahw32p(const __u32 *p)
+{
+#ifdef __arch_swahw32p
+	return __arch_swahw32p(p);
+#else
+	return __swahw32(*p);
+#endif
+}
+
+/**
+ * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high/low byteswapping.
+ */
+static inline __u32 __swahb32p(const __u32 *p)
+{
+#ifdef __arch_swahb32p
+	return __arch_swahb32p(p);
+#else
+	return __swahb32(*p);
+#endif
+}
+
+/**
+ * __swab16s - byteswap a 16-bit value in-place
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline void __swab16s(__u16 *p)
+{
+#ifdef __arch_swab16s
+	__arch_swab16s(p);
+#else
+	*p = __swab16p(p);
+#endif
+}
+/**
+ * __swab32s - byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline void __swab32s(__u32 *p)
+{
+#ifdef __arch_swab32s
+	__arch_swab32s(p);
+#else
+	*p = __swab32p(p);
+#endif
+}
+
+/**
+ * __swab64s - byteswap a 64-bit value in-place
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline void __swab64s(__u64 *p)
+{
+#ifdef __arch_swab64s
+	__arch_swab64s(p);
+#else
+	*p = __swab64p(p);
+#endif
+}
+
+/**
+ * __swahw32s - wordswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping
+ */
+static inline void __swahw32s(__u32 *p)
+{
+#ifdef __arch_swahw32s
+	__arch_swahw32s(p);
+#else
+	*p = __swahw32p(p);
+#endif
+}
+
+/**
+ * __swahb32s - high and low byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high and low byte swapping
+ */
+static inline void __swahb32s(__u32 *p)
+{
+#ifdef __arch_swahb32s
+	__arch_swahb32s(p);
+#else
+	*p = __swahb32p(p);
+#endif
+}
+
+
+#endif /* _UAPI_LINUX_SWAB_H */
diff --git a/include/uapi/linux/synclink.h b/include/uapi/linux/synclink.h
new file mode 100644
index 0000000000000000000000000000000000000000..7dcb065a5f76dcf502ff62621fa260d66cf37985
--- /dev/null
+++ b/include/uapi/linux/synclink.h
@@ -0,0 +1,300 @@
+/*
+ * SyncLink Multiprotocol Serial Adapter Driver
+ *
+ * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $
+ *
+ * Copyright (C) 1998-2000 by Microgate Corporation
+ *
+ * Redistribution of this file is permitted under
+ * the terms of the GNU Public License (GPL)
+ */
+
+#ifndef _UAPI_SYNCLINK_H_
+#define _UAPI_SYNCLINK_H_
+#define SYNCLINK_H_VERSION 3.6
+
+#include <linux/types.h>
+
+#define BIT0	0x0001
+#define BIT1	0x0002
+#define BIT2	0x0004
+#define BIT3	0x0008
+#define BIT4	0x0010
+#define BIT5	0x0020
+#define BIT6	0x0040
+#define BIT7	0x0080
+#define BIT8	0x0100
+#define BIT9	0x0200
+#define BIT10	0x0400
+#define BIT11	0x0800
+#define BIT12	0x1000
+#define BIT13	0x2000
+#define BIT14	0x4000
+#define BIT15	0x8000
+#define BIT16	0x00010000
+#define BIT17	0x00020000
+#define BIT18	0x00040000
+#define BIT19	0x00080000
+#define BIT20	0x00100000
+#define BIT21	0x00200000
+#define BIT22	0x00400000
+#define BIT23	0x00800000
+#define BIT24	0x01000000
+#define BIT25	0x02000000
+#define BIT26	0x04000000
+#define BIT27	0x08000000
+#define BIT28	0x10000000
+#define BIT29	0x20000000
+#define BIT30	0x40000000
+#define BIT31	0x80000000
+
+
+#define HDLC_MAX_FRAME_SIZE	65535
+#define MAX_ASYNC_TRANSMIT	4096
+#define MAX_ASYNC_BUFFER_SIZE	4096
+
+#define ASYNC_PARITY_NONE		0
+#define ASYNC_PARITY_EVEN		1
+#define ASYNC_PARITY_ODD		2
+#define ASYNC_PARITY_SPACE		3
+
+#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
+#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
+#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
+#define HDLC_FLAG_UNDERRUN_CRC		0x0004
+#define HDLC_FLAG_SHARE_ZERO		0x0010
+#define HDLC_FLAG_AUTO_CTS		0x0020
+#define HDLC_FLAG_AUTO_DCD		0x0040
+#define HDLC_FLAG_AUTO_RTS		0x0080
+#define HDLC_FLAG_RXC_DPLL		0x0100
+#define HDLC_FLAG_RXC_BRG		0x0200
+#define HDLC_FLAG_RXC_TXCPIN		0x8000
+#define HDLC_FLAG_RXC_RXCPIN		0x0000
+#define HDLC_FLAG_TXC_DPLL		0x0400
+#define HDLC_FLAG_TXC_BRG		0x0800
+#define HDLC_FLAG_TXC_TXCPIN		0x0000
+#define HDLC_FLAG_TXC_RXCPIN		0x0008
+#define HDLC_FLAG_DPLL_DIV8		0x1000
+#define HDLC_FLAG_DPLL_DIV16		0x2000
+#define HDLC_FLAG_DPLL_DIV32		0x0000
+#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
+
+#define HDLC_CRC_NONE			0
+#define HDLC_CRC_16_CCITT		1
+#define HDLC_CRC_32_CCITT		2
+#define HDLC_CRC_MASK			0x00ff
+#define HDLC_CRC_RETURN_EX		0x8000
+
+#define RX_OK				0
+#define RX_CRC_ERROR			1
+
+#define HDLC_TXIDLE_FLAGS		0
+#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
+#define HDLC_TXIDLE_ZEROS		2
+#define HDLC_TXIDLE_ONES		3
+#define HDLC_TXIDLE_ALT_MARK_SPACE	4
+#define HDLC_TXIDLE_SPACE		5
+#define HDLC_TXIDLE_MARK		6
+#define HDLC_TXIDLE_CUSTOM_8            0x10000000
+#define HDLC_TXIDLE_CUSTOM_16           0x20000000
+
+#define HDLC_ENCODING_NRZ			0
+#define HDLC_ENCODING_NRZB			1
+#define HDLC_ENCODING_NRZI_MARK			2
+#define HDLC_ENCODING_NRZI_SPACE		3
+#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
+#define HDLC_ENCODING_BIPHASE_MARK		4
+#define HDLC_ENCODING_BIPHASE_SPACE		5
+#define HDLC_ENCODING_BIPHASE_LEVEL		6
+#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
+
+#define HDLC_PREAMBLE_LENGTH_8BITS	0
+#define HDLC_PREAMBLE_LENGTH_16BITS	1
+#define HDLC_PREAMBLE_LENGTH_32BITS	2
+#define HDLC_PREAMBLE_LENGTH_64BITS	3
+
+#define HDLC_PREAMBLE_PATTERN_NONE	0
+#define HDLC_PREAMBLE_PATTERN_ZEROS	1
+#define HDLC_PREAMBLE_PATTERN_FLAGS	2
+#define HDLC_PREAMBLE_PATTERN_10	3
+#define HDLC_PREAMBLE_PATTERN_01	4
+#define HDLC_PREAMBLE_PATTERN_ONES	5
+
+#define MGSL_MODE_ASYNC		1
+#define MGSL_MODE_HDLC		2
+#define MGSL_MODE_MONOSYNC	3
+#define MGSL_MODE_BISYNC	4
+#define MGSL_MODE_RAW		6
+#define MGSL_MODE_BASE_CLOCK    7
+#define MGSL_MODE_XSYNC         8
+
+#define MGSL_BUS_TYPE_ISA	1
+#define MGSL_BUS_TYPE_EISA	2
+#define MGSL_BUS_TYPE_PCI	5
+
+#define MGSL_INTERFACE_MASK     0xf
+#define MGSL_INTERFACE_DISABLE  0
+#define MGSL_INTERFACE_RS232    1
+#define MGSL_INTERFACE_V35      2
+#define MGSL_INTERFACE_RS422    3
+#define MGSL_INTERFACE_RTS_EN   0x10
+#define MGSL_INTERFACE_LL       0x20
+#define MGSL_INTERFACE_RL       0x40
+#define MGSL_INTERFACE_MSB_FIRST 0x80
+
+typedef struct _MGSL_PARAMS
+{
+	/* Common */
+
+	unsigned long	mode;		/* Asynchronous or HDLC */
+	unsigned char	loopback;	/* internal loopback mode */
+
+	/* HDLC Only */
+
+	unsigned short	flags;
+	unsigned char	encoding;	/* NRZ, NRZI, etc. */
+	unsigned long	clock_speed;	/* external clock speed in bits per second */
+	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
+	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
+	unsigned char	preamble_length;
+	unsigned char	preamble;
+
+	/* Async Only */
+
+	unsigned long	data_rate;	/* bits per second */
+	unsigned char	data_bits;	/* 7 or 8 data bits */
+	unsigned char	stop_bits;	/* 1 or 2 stop bits */
+	unsigned char	parity;		/* none, even, or odd */
+
+} MGSL_PARAMS, *PMGSL_PARAMS;
+
+#define MICROGATE_VENDOR_ID 0x13c0
+#define SYNCLINK_DEVICE_ID 0x0010
+#define MGSCC_DEVICE_ID 0x0020
+#define SYNCLINK_SCA_DEVICE_ID 0x0030
+#define SYNCLINK_GT_DEVICE_ID 0x0070
+#define SYNCLINK_GT4_DEVICE_ID 0x0080
+#define SYNCLINK_AC_DEVICE_ID  0x0090
+#define SYNCLINK_GT2_DEVICE_ID 0x00A0
+#define MGSL_MAX_SERIAL_NUMBER 30
+
+/*
+** device diagnostics status
+*/
+
+#define DiagStatus_OK				0
+#define DiagStatus_AddressFailure		1
+#define DiagStatus_AddressConflict		2
+#define DiagStatus_IrqFailure			3
+#define DiagStatus_IrqConflict			4
+#define DiagStatus_DmaFailure			5
+#define DiagStatus_DmaConflict			6
+#define DiagStatus_PciAdapterNotFound		7
+#define DiagStatus_CantAssignPciResources	8
+#define DiagStatus_CantAssignPciMemAddr		9
+#define DiagStatus_CantAssignPciIoAddr		10
+#define DiagStatus_CantAssignPciIrq		11
+#define DiagStatus_MemoryError			12
+
+#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
+#define SerialSignal_TXD            0x02     /* Transmit Data */
+#define SerialSignal_RI             0x04     /* Ring Indicator */
+#define SerialSignal_RXD            0x08     /* Receive Data */
+#define SerialSignal_CTS            0x10     /* Clear to Send */
+#define SerialSignal_RTS            0x20     /* Request to Send */
+#define SerialSignal_DSR            0x40     /* Data Set Ready */
+#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
+
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+struct mgsl_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+	__u32	txok;
+	__u32	txunder;
+	__u32	txabort;
+	__u32	txtimeout;
+	__u32	rxshort;
+	__u32	rxlong;
+	__u32	rxabort;
+	__u32	rxover;
+	__u32	rxcrc;
+	__u32	rxok;
+	__u32	exithunt;
+	__u32	rxidle;
+};
+
+struct gpio_desc {
+	__u32 state;
+	__u32 smask;
+	__u32 dir;
+	__u32 dmask;
+};
+
+#define DEBUG_LEVEL_DATA	1
+#define DEBUG_LEVEL_ERROR 	2
+#define DEBUG_LEVEL_INFO  	3
+#define DEBUG_LEVEL_BH    	4
+#define DEBUG_LEVEL_ISR		5
+
+/*
+** Event bit flags for use with MgslWaitEvent
+*/
+
+#define MgslEvent_DsrActive	0x0001
+#define MgslEvent_DsrInactive	0x0002
+#define MgslEvent_Dsr		0x0003
+#define MgslEvent_CtsActive	0x0004
+#define MgslEvent_CtsInactive	0x0008
+#define MgslEvent_Cts		0x000c
+#define MgslEvent_DcdActive	0x0010
+#define MgslEvent_DcdInactive	0x0020
+#define MgslEvent_Dcd		0x0030
+#define MgslEvent_RiActive	0x0040
+#define MgslEvent_RiInactive	0x0080
+#define MgslEvent_Ri		0x00c0
+#define MgslEvent_ExitHuntMode	0x0100
+#define MgslEvent_IdleReceived	0x0200
+
+/* Private IOCTL codes:
+ *
+ * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
+ * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
+ * MGSL_IOCSTXIDLE	set current transmit idle mode
+ * MGSL_IOCGTXIDLE	get current transmit idle mode
+ * MGSL_IOCTXENABLE	enable or disable transmitter
+ * MGSL_IOCRXENABLE	enable or disable receiver
+ * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
+ * MGSL_IOCGSTATS	return current statistics
+ * MGSL_IOCWAITEVENT	wait for specified event to occur
+ * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
+ * MGSL_IOCSIF          set the serial interface type
+ * MGSL_IOCGIF          get the serial interface type
+ */
+#define MGSL_MAGIC_IOC	'm'
+#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
+#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
+#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
+#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
+#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
+#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
+#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
+#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
+#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
+#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
+#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
+#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
+#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
+#define MGSL_IOCSGPIO		_IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
+#define MGSL_IOCGGPIO		_IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
+#define MGSL_IOCWAITGPIO	_IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
+#define MGSL_IOCSXSYNC		_IO(MGSL_MAGIC_IOC, 19)
+#define MGSL_IOCGXSYNC		_IO(MGSL_MAGIC_IOC, 20)
+#define MGSL_IOCSXCTRL		_IO(MGSL_MAGIC_IOC, 21)
+#define MGSL_IOCGXCTRL		_IO(MGSL_MAGIC_IOC, 22)
+
+
+#endif /* _UAPI_SYNCLINK_H_ */
diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h
new file mode 100644
index 0000000000000000000000000000000000000000..6d6721341f498656e2dc8996326d3b561e3f9581
--- /dev/null
+++ b/include/uapi/linux/sysctl.h
@@ -0,0 +1,932 @@
+/*
+ * sysctl.h: General linux system control interface
+ *
+ * Begun 24 March 1995, Stephen Tweedie
+ *
+ ****************************************************************
+ ****************************************************************
+ **
+ **  WARNING:
+ **  The values in this file are exported to user space via 
+ **  the sysctl() binary interface.  Do *NOT* change the
+ **  numbering of any existing values here, and do not change
+ **  any numbers within any one set of values.  If you have to
+ **  redefine an existing interface, use a new number for it.
+ **  The kernel will then return -ENOTDIR to any application using
+ **  the old binary interface.
+ **
+ ****************************************************************
+ ****************************************************************
+ */
+
+#ifndef _UAPI_LINUX_SYSCTL_H
+#define _UAPI_LINUX_SYSCTL_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+struct completion;
+
+#define CTL_MAXNAME 10		/* how many path components do we allow in a
+				   call to sysctl?   In other words, what is
+				   the largest acceptable value for the nlen
+				   member of a struct __sysctl_args to have? */
+
+struct __sysctl_args {
+	int __user *name;
+	int nlen;
+	void __user *oldval;
+	size_t __user *oldlenp;
+	void __user *newval;
+	size_t newlen;
+	unsigned long __unused[4];
+};
+
+/* Define sysctl names first */
+
+/* Top-level names: */
+
+enum
+{
+	CTL_KERN=1,		/* General kernel info and control */
+	CTL_VM=2,		/* VM management */
+	CTL_NET=3,		/* Networking */
+	CTL_PROC=4,		/* removal breaks strace(1) compilation */
+	CTL_FS=5,		/* Filesystems */
+	CTL_DEBUG=6,		/* Debugging */
+	CTL_DEV=7,		/* Devices */
+	CTL_BUS=8,		/* Busses */
+	CTL_ABI=9,		/* Binary emulation */
+	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
+	CTL_ARLAN=254,		/* arlan wireless driver */
+	CTL_S390DBF=5677,	/* s390 debug */
+	CTL_SUNRPC=7249,	/* sunrpc debug */
+	CTL_PM=9899,		/* frv power management */
+	CTL_FRV=9898,		/* frv specific sysctls */
+};
+
+/* CTL_BUS names: */
+enum
+{
+	CTL_BUS_ISA=1		/* ISA */
+};
+
+/* /proc/sys/fs/inotify/ */
+enum
+{
+	INOTIFY_MAX_USER_INSTANCES=1,	/* max instances per user */
+	INOTIFY_MAX_USER_WATCHES=2,	/* max watches per user */
+	INOTIFY_MAX_QUEUED_EVENTS=3	/* max queued events per instance */
+};
+
+/* CTL_KERN names: */
+enum
+{
+	KERN_OSTYPE=1,		/* string: system version */
+	KERN_OSRELEASE=2,	/* string: system release */
+	KERN_OSREV=3,		/* int: system revision */
+	KERN_VERSION=4,		/* string: compile time info */
+	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
+	KERN_PROF=6,		/* table: profiling information */
+	KERN_NODENAME=7,	/* string: hostname */
+	KERN_DOMAINNAME=8,	/* string: domainname */
+
+	KERN_PANIC=15,		/* int: panic timeout */
+	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
+
+	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
+	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
+	KERN_PRINTK=23,		/* struct: control printk logging parameters */
+	KERN_NAMETRANS=24,	/* Name translation */
+	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
+	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
+	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
+	KERN_MODPROBE=28,	/* string: modprobe path */
+	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
+	KERN_ACCT=30,		/* BSD process accounting parameters */
+	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
+
+	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
+	KERN_RTSIGMAX=33,	/* Max queuable */
+	
+	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
+	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
+	KERN_MSGMNB=36,         /* int: Maximum message queue size */
+	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
+	KERN_SYSRQ=38,		/* int: Sysreq enable */
+	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
+ 	KERN_RANDOM=40,		/* Random driver */
+ 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
+ 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
+ 	KERN_SEM=43,		/* struct: sysv semaphore limits */
+ 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
+ 	KERN_SHMMNI=45,		/* int: shm array identifiers */
+	KERN_OVERFLOWUID=46,	/* int: overflow UID */
+	KERN_OVERFLOWGID=47,	/* int: overflow GID */
+	KERN_SHMPATH=48,	/* string: path to shm fs */
+	KERN_HOTPLUG=49,	/* string: path to uevent helper (deprecated) */
+	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
+	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
+	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
+	KERN_TAINTED=53,	/* int: various kernel tainted flags */
+	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
+	KERN_PIDMAX=55,		/* int: PID # limit */
+  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
+	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
+	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
+	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
+	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
+	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
+	KERN_PTY=62,		/* dir: pty driver */
+	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
+	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
+	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
+	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
+	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
+	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
+	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
+	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
+	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
+	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
+	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
+	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
+	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
+};
+
+
+
+/* CTL_VM names: */
+enum
+{
+	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
+	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
+	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
+	VM_UNUSED4=4,		/* Spare */
+	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
+	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
+	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
+	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
+	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
+	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
+	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
+	VM_DIRTY_RATIO=12,	/* dirty_ratio */
+	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
+	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
+	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
+	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
+	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
+	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
+	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
+	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
+	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
+	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
+	VM_LAPTOP_MODE=23,	/* vm laptop mode */
+	VM_BLOCK_DUMP=24,	/* block dump mode */
+	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
+	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
+	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
+	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
+	VM_DROP_PAGECACHE=29,	/* int: nuke lots of pagecache */
+	VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
+	VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
+	VM_MIN_UNMAPPED=32,	/* Set min percent of unmapped pages */
+	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
+	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
+	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
+};
+
+
+/* CTL_NET names: */
+enum
+{
+	NET_CORE=1,
+	NET_ETHER=2,
+	NET_802=3,
+	NET_UNIX=4,
+	NET_IPV4=5,
+	NET_IPX=6,
+	NET_ATALK=7,
+	NET_NETROM=8,
+	NET_AX25=9,
+	NET_BRIDGE=10,
+	NET_ROSE=11,
+	NET_IPV6=12,
+	NET_X25=13,
+	NET_TR=14,
+	NET_DECNET=15,
+	NET_ECONET=16,
+	NET_SCTP=17,
+	NET_LLC=18,
+	NET_NETFILTER=19,
+	NET_DCCP=20,
+	NET_IRDA=412,
+};
+
+/* /proc/sys/kernel/random */
+enum
+{
+	RANDOM_POOLSIZE=1,
+	RANDOM_ENTROPY_COUNT=2,
+	RANDOM_READ_THRESH=3,
+	RANDOM_WRITE_THRESH=4,
+	RANDOM_BOOT_ID=5,
+	RANDOM_UUID=6
+};
+
+/* /proc/sys/kernel/pty */
+enum
+{
+	PTY_MAX=1,
+	PTY_NR=2
+};
+
+/* /proc/sys/bus/isa */
+enum
+{
+	BUS_ISA_MEM_BASE=1,
+	BUS_ISA_PORT_BASE=2,
+	BUS_ISA_PORT_SHIFT=3
+};
+
+/* /proc/sys/net/core */
+enum
+{
+	NET_CORE_WMEM_MAX=1,
+	NET_CORE_RMEM_MAX=2,
+	NET_CORE_WMEM_DEFAULT=3,
+	NET_CORE_RMEM_DEFAULT=4,
+/* was	NET_CORE_DESTROY_DELAY */
+	NET_CORE_MAX_BACKLOG=6,
+	NET_CORE_FASTROUTE=7,
+	NET_CORE_MSG_COST=8,
+	NET_CORE_MSG_BURST=9,
+	NET_CORE_OPTMEM_MAX=10,
+	NET_CORE_HOT_LIST_LENGTH=11,
+	NET_CORE_DIVERT_VERSION=12,
+	NET_CORE_NO_CONG_THRESH=13,
+	NET_CORE_NO_CONG=14,
+	NET_CORE_LO_CONG=15,
+	NET_CORE_MOD_CONG=16,
+	NET_CORE_DEV_WEIGHT=17,
+	NET_CORE_SOMAXCONN=18,
+	NET_CORE_BUDGET=19,
+	NET_CORE_AEVENT_ETIME=20,
+	NET_CORE_AEVENT_RSEQTH=21,
+	NET_CORE_WARNINGS=22,
+};
+
+/* /proc/sys/net/ethernet */
+
+/* /proc/sys/net/802 */
+
+/* /proc/sys/net/unix */
+
+enum
+{
+	NET_UNIX_DESTROY_DELAY=1,
+	NET_UNIX_DELETE_DELAY=2,
+	NET_UNIX_MAX_DGRAM_QLEN=3,
+};
+
+/* /proc/sys/net/netfilter */
+enum
+{
+	NET_NF_CONNTRACK_MAX=1,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_NF_CONNTRACK_BUCKETS=14,
+	NET_NF_CONNTRACK_LOG_INVALID=15,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_NF_CONNTRACK_COUNT=27,
+	NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
+	NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
+	NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
+	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
+	NET_NF_CONNTRACK_CHECKSUM=32,
+};
+
+/* /proc/sys/net/ipv4 */
+enum
+{
+	/* v2.0 compatibile variables */
+	NET_IPV4_FORWARD=8,
+	NET_IPV4_DYNADDR=9,
+
+	NET_IPV4_CONF=16,
+	NET_IPV4_NEIGH=17,
+	NET_IPV4_ROUTE=18,
+	NET_IPV4_FIB_HASH=19,
+	NET_IPV4_NETFILTER=20,
+
+	NET_IPV4_TCP_TIMESTAMPS=33,
+	NET_IPV4_TCP_WINDOW_SCALING=34,
+	NET_IPV4_TCP_SACK=35,
+	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
+	NET_IPV4_DEFAULT_TTL=37,
+	NET_IPV4_AUTOCONFIG=38,
+	NET_IPV4_NO_PMTU_DISC=39,
+	NET_IPV4_TCP_SYN_RETRIES=40,
+	NET_IPV4_IPFRAG_HIGH_THRESH=41,
+	NET_IPV4_IPFRAG_LOW_THRESH=42,
+	NET_IPV4_IPFRAG_TIME=43,
+	NET_IPV4_TCP_MAX_KA_PROBES=44,
+	NET_IPV4_TCP_KEEPALIVE_TIME=45,
+	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
+	NET_IPV4_TCP_RETRIES1=47,
+	NET_IPV4_TCP_RETRIES2=48,
+	NET_IPV4_TCP_FIN_TIMEOUT=49,
+	NET_IPV4_IP_MASQ_DEBUG=50,
+	NET_TCP_SYNCOOKIES=51,
+	NET_TCP_STDURG=52,
+	NET_TCP_RFC1337=53,
+	NET_TCP_SYN_TAILDROP=54,
+	NET_TCP_MAX_SYN_BACKLOG=55,
+	NET_IPV4_LOCAL_PORT_RANGE=56,
+	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
+	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
+	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
+	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
+	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
+	NET_IPV4_ICMP_PARAMPROB_RATE=62,
+	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
+	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
+	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
+	NET_TCP_TW_RECYCLE=66,
+	NET_IPV4_ALWAYS_DEFRAG=67,
+	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
+	NET_IPV4_INET_PEER_THRESHOLD=69,
+	NET_IPV4_INET_PEER_MINTTL=70,
+	NET_IPV4_INET_PEER_MAXTTL=71,
+	NET_IPV4_INET_PEER_GC_MINTIME=72,
+	NET_IPV4_INET_PEER_GC_MAXTIME=73,
+	NET_TCP_ORPHAN_RETRIES=74,
+	NET_TCP_ABORT_ON_OVERFLOW=75,
+	NET_TCP_SYNACK_RETRIES=76,
+	NET_TCP_MAX_ORPHANS=77,
+	NET_TCP_MAX_TW_BUCKETS=78,
+	NET_TCP_FACK=79,
+	NET_TCP_REORDERING=80,
+	NET_TCP_ECN=81,
+	NET_TCP_DSACK=82,
+	NET_TCP_MEM=83,
+	NET_TCP_WMEM=84,
+	NET_TCP_RMEM=85,
+	NET_TCP_APP_WIN=86,
+	NET_TCP_ADV_WIN_SCALE=87,
+	NET_IPV4_NONLOCAL_BIND=88,
+	NET_IPV4_ICMP_RATELIMIT=89,
+	NET_IPV4_ICMP_RATEMASK=90,
+	NET_TCP_TW_REUSE=91,
+	NET_TCP_FRTO=92,
+	NET_TCP_LOW_LATENCY=93,
+	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
+	NET_IPV4_IGMP_MAX_MSF=96,
+	NET_TCP_NO_METRICS_SAVE=97,
+	NET_TCP_DEFAULT_WIN_SCALE=105,
+	NET_TCP_MODERATE_RCVBUF=106,
+	NET_TCP_TSO_WIN_DIVISOR=107,
+	NET_TCP_BIC_BETA=108,
+	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
+	NET_TCP_CONG_CONTROL=110,
+	NET_TCP_ABC=111,
+	NET_IPV4_IPFRAG_MAX_DIST=112,
+ 	NET_TCP_MTU_PROBING=113,
+	NET_TCP_BASE_MSS=114,
+	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
+	NET_TCP_DMA_COPYBREAK=116,
+	NET_TCP_SLOW_START_AFTER_IDLE=117,
+	NET_CIPSOV4_CACHE_ENABLE=118,
+	NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
+	NET_CIPSOV4_RBM_OPTFMT=120,
+	NET_CIPSOV4_RBM_STRICTVALID=121,
+	NET_TCP_AVAIL_CONG_CONTROL=122,
+	NET_TCP_ALLOWED_CONG_CONTROL=123,
+	NET_TCP_MAX_SSTHRESH=124,
+	NET_TCP_FRTO_RESPONSE=125,
+};
+
+enum {
+	NET_IPV4_ROUTE_FLUSH=1,
+	NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
+	NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
+	NET_IPV4_ROUTE_GC_THRESH=4,
+	NET_IPV4_ROUTE_MAX_SIZE=5,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
+	NET_IPV4_ROUTE_GC_TIMEOUT=7,
+	NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
+	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
+	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
+	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
+	NET_IPV4_ROUTE_ERROR_COST=12,
+	NET_IPV4_ROUTE_ERROR_BURST=13,
+	NET_IPV4_ROUTE_GC_ELASTICITY=14,
+	NET_IPV4_ROUTE_MTU_EXPIRES=15,
+	NET_IPV4_ROUTE_MIN_PMTU=16,
+	NET_IPV4_ROUTE_MIN_ADVMSS=17,
+	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
+};
+
+enum
+{
+	NET_PROTO_CONF_ALL=-2,
+	NET_PROTO_CONF_DEFAULT=-3
+
+	/* And device ifindices ... */
+};
+
+enum
+{
+	NET_IPV4_CONF_FORWARDING=1,
+	NET_IPV4_CONF_MC_FORWARDING=2,
+	NET_IPV4_CONF_PROXY_ARP=3,
+	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
+	NET_IPV4_CONF_SECURE_REDIRECTS=5,
+	NET_IPV4_CONF_SEND_REDIRECTS=6,
+	NET_IPV4_CONF_SHARED_MEDIA=7,
+	NET_IPV4_CONF_RP_FILTER=8,
+	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
+	NET_IPV4_CONF_BOOTP_RELAY=10,
+	NET_IPV4_CONF_LOG_MARTIANS=11,
+	NET_IPV4_CONF_TAG=12,
+	NET_IPV4_CONF_ARPFILTER=13,
+	NET_IPV4_CONF_MEDIUM_ID=14,
+	NET_IPV4_CONF_NOXFRM=15,
+	NET_IPV4_CONF_NOPOLICY=16,
+	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
+	NET_IPV4_CONF_ARP_ANNOUNCE=18,
+	NET_IPV4_CONF_ARP_IGNORE=19,
+	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
+	NET_IPV4_CONF_ARP_ACCEPT=21,
+	NET_IPV4_CONF_ARP_NOTIFY=22,
+};
+
+/* /proc/sys/net/ipv4/netfilter */
+enum
+{
+	NET_IPV4_NF_CONNTRACK_MAX=1,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
+	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_IPV4_NF_CONNTRACK_COUNT=27,
+	NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
+};
+ 
+/* /proc/sys/net/ipv6 */
+enum {
+	NET_IPV6_CONF=16,
+	NET_IPV6_NEIGH=17,
+	NET_IPV6_ROUTE=18,
+	NET_IPV6_ICMP=19,
+	NET_IPV6_BINDV6ONLY=20,
+	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
+	NET_IPV6_IP6FRAG_LOW_THRESH=22,
+	NET_IPV6_IP6FRAG_TIME=23,
+	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
+	NET_IPV6_MLD_MAX_MSF=25,
+};
+
+enum {
+	NET_IPV6_ROUTE_FLUSH=1,
+	NET_IPV6_ROUTE_GC_THRESH=2,
+	NET_IPV6_ROUTE_MAX_SIZE=3,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
+	NET_IPV6_ROUTE_GC_TIMEOUT=5,
+	NET_IPV6_ROUTE_GC_INTERVAL=6,
+	NET_IPV6_ROUTE_GC_ELASTICITY=7,
+	NET_IPV6_ROUTE_MTU_EXPIRES=8,
+	NET_IPV6_ROUTE_MIN_ADVMSS=9,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
+};
+
+enum {
+	NET_IPV6_FORWARDING=1,
+	NET_IPV6_HOP_LIMIT=2,
+	NET_IPV6_MTU=3,
+	NET_IPV6_ACCEPT_RA=4,
+	NET_IPV6_ACCEPT_REDIRECTS=5,
+	NET_IPV6_AUTOCONF=6,
+	NET_IPV6_DAD_TRANSMITS=7,
+	NET_IPV6_RTR_SOLICITS=8,
+	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
+	NET_IPV6_RTR_SOLICIT_DELAY=10,
+	NET_IPV6_USE_TEMPADDR=11,
+	NET_IPV6_TEMP_VALID_LFT=12,
+	NET_IPV6_TEMP_PREFERED_LFT=13,
+	NET_IPV6_REGEN_MAX_RETRY=14,
+	NET_IPV6_MAX_DESYNC_FACTOR=15,
+	NET_IPV6_MAX_ADDRESSES=16,
+	NET_IPV6_FORCE_MLD_VERSION=17,
+	NET_IPV6_ACCEPT_RA_DEFRTR=18,
+	NET_IPV6_ACCEPT_RA_PINFO=19,
+	NET_IPV6_ACCEPT_RA_RTR_PREF=20,
+	NET_IPV6_RTR_PROBE_INTERVAL=21,
+	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
+	NET_IPV6_PROXY_NDP=23,
+	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
+	__NET_IPV6_MAX
+};
+
+/* /proc/sys/net/ipv6/icmp */
+enum {
+	NET_IPV6_ICMP_RATELIMIT=1
+};
+
+/* /proc/sys/net/<protocol>/neigh/<dev> */
+enum {
+	NET_NEIGH_MCAST_SOLICIT=1,
+	NET_NEIGH_UCAST_SOLICIT=2,
+	NET_NEIGH_APP_SOLICIT=3,
+	NET_NEIGH_RETRANS_TIME=4,
+	NET_NEIGH_REACHABLE_TIME=5,
+	NET_NEIGH_DELAY_PROBE_TIME=6,
+	NET_NEIGH_GC_STALE_TIME=7,
+	NET_NEIGH_UNRES_QLEN=8,
+	NET_NEIGH_PROXY_QLEN=9,
+	NET_NEIGH_ANYCAST_DELAY=10,
+	NET_NEIGH_PROXY_DELAY=11,
+	NET_NEIGH_LOCKTIME=12,
+	NET_NEIGH_GC_INTERVAL=13,
+	NET_NEIGH_GC_THRESH1=14,
+	NET_NEIGH_GC_THRESH2=15,
+	NET_NEIGH_GC_THRESH3=16,
+	NET_NEIGH_RETRANS_TIME_MS=17,
+	NET_NEIGH_REACHABLE_TIME_MS=18,
+};
+
+/* /proc/sys/net/dccp */
+enum {
+	NET_DCCP_DEFAULT=1,
+};
+
+/* /proc/sys/net/ipx */
+enum {
+	NET_IPX_PPROP_BROADCASTING=1,
+	NET_IPX_FORWARDING=2
+};
+
+/* /proc/sys/net/llc */
+enum {
+	NET_LLC2=1,
+	NET_LLC_STATION=2,
+};
+
+/* /proc/sys/net/llc/llc2 */
+enum {
+	NET_LLC2_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/station */
+enum {
+	NET_LLC_STATION_ACK_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/llc2/timeout */
+enum {
+	NET_LLC2_ACK_TIMEOUT=1,
+	NET_LLC2_P_TIMEOUT=2,
+	NET_LLC2_REJ_TIMEOUT=3,
+	NET_LLC2_BUSY_TIMEOUT=4,
+};
+
+/* /proc/sys/net/appletalk */
+enum {
+	NET_ATALK_AARP_EXPIRY_TIME=1,
+	NET_ATALK_AARP_TICK_TIME=2,
+	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
+	NET_ATALK_AARP_RESOLVE_TIME=4
+};
+
+
+/* /proc/sys/net/netrom */
+enum {
+	NET_NETROM_DEFAULT_PATH_QUALITY=1,
+	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
+	NET_NETROM_NETWORK_TTL_INITIALISER=3,
+	NET_NETROM_TRANSPORT_TIMEOUT=4,
+	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
+	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
+	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
+	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
+	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
+	NET_NETROM_ROUTING_CONTROL=10,
+	NET_NETROM_LINK_FAILS_COUNT=11,
+	NET_NETROM_RESET=12
+};
+
+/* /proc/sys/net/ax25 */
+enum {
+	NET_AX25_IP_DEFAULT_MODE=1,
+	NET_AX25_DEFAULT_MODE=2,
+	NET_AX25_BACKOFF_TYPE=3,
+	NET_AX25_CONNECT_MODE=4,
+	NET_AX25_STANDARD_WINDOW=5,
+	NET_AX25_EXTENDED_WINDOW=6,
+	NET_AX25_T1_TIMEOUT=7,
+	NET_AX25_T2_TIMEOUT=8,
+	NET_AX25_T3_TIMEOUT=9,
+	NET_AX25_IDLE_TIMEOUT=10,
+	NET_AX25_N2=11,
+	NET_AX25_PACLEN=12,
+	NET_AX25_PROTOCOL=13,
+	NET_AX25_DAMA_SLAVE_TIMEOUT=14
+};
+
+/* /proc/sys/net/rose */
+enum {
+	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
+	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
+	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
+	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
+	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_ROSE_ROUTING_CONTROL=6,
+	NET_ROSE_LINK_FAIL_TIMEOUT=7,
+	NET_ROSE_MAX_VCS=8,
+	NET_ROSE_WINDOW_SIZE=9,
+	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
+};
+
+/* /proc/sys/net/x25 */
+enum {
+	NET_X25_RESTART_REQUEST_TIMEOUT=1,
+	NET_X25_CALL_REQUEST_TIMEOUT=2,
+	NET_X25_RESET_REQUEST_TIMEOUT=3,
+	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
+	NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_X25_FORWARD=6
+};
+
+/* /proc/sys/net/token-ring */
+enum
+{
+	NET_TR_RIF_TIMEOUT=1
+};
+
+/* /proc/sys/net/decnet/ */
+enum {
+	NET_DECNET_NODE_TYPE = 1,
+	NET_DECNET_NODE_ADDRESS = 2,
+	NET_DECNET_NODE_NAME = 3,
+	NET_DECNET_DEFAULT_DEVICE = 4,
+	NET_DECNET_TIME_WAIT = 5,
+	NET_DECNET_DN_COUNT = 6,
+	NET_DECNET_DI_COUNT = 7,
+	NET_DECNET_DR_COUNT = 8,
+	NET_DECNET_DST_GC_INTERVAL = 9,
+	NET_DECNET_CONF = 10,
+	NET_DECNET_NO_FC_MAX_CWND = 11,
+	NET_DECNET_MEM = 12,
+	NET_DECNET_RMEM = 13,
+	NET_DECNET_WMEM = 14,
+	NET_DECNET_DEBUG_LEVEL = 255
+};
+
+/* /proc/sys/net/decnet/conf/<dev> */
+enum {
+	NET_DECNET_CONF_LOOPBACK = -2,
+	NET_DECNET_CONF_DDCMP = -3,
+	NET_DECNET_CONF_PPP = -4,
+	NET_DECNET_CONF_X25 = -5,
+	NET_DECNET_CONF_GRE = -6,
+	NET_DECNET_CONF_ETHER = -7
+
+	/* ... and ifindex of devices */
+};
+
+/* /proc/sys/net/decnet/conf/<dev>/ */
+enum {
+	NET_DECNET_CONF_DEV_PRIORITY = 1,
+	NET_DECNET_CONF_DEV_T1 = 2,
+	NET_DECNET_CONF_DEV_T2 = 3,
+	NET_DECNET_CONF_DEV_T3 = 4,
+	NET_DECNET_CONF_DEV_FORWARDING = 5,
+	NET_DECNET_CONF_DEV_BLKSIZE = 6,
+	NET_DECNET_CONF_DEV_STATE = 7
+};
+
+/* /proc/sys/net/sctp */
+enum {
+	NET_SCTP_RTO_INITIAL = 1,
+	NET_SCTP_RTO_MIN     = 2,
+	NET_SCTP_RTO_MAX     = 3,
+	NET_SCTP_RTO_ALPHA   = 4,
+	NET_SCTP_RTO_BETA    = 5,
+	NET_SCTP_VALID_COOKIE_LIFE       =  6,
+	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
+	NET_SCTP_PATH_MAX_RETRANS        =  8,
+	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
+	NET_SCTP_HB_INTERVAL             = 10,
+	NET_SCTP_PRESERVE_ENABLE         = 11,
+	NET_SCTP_MAX_BURST               = 12,
+	NET_SCTP_ADDIP_ENABLE		 = 13,
+	NET_SCTP_PRSCTP_ENABLE		 = 14,
+	NET_SCTP_SNDBUF_POLICY		 = 15,
+	NET_SCTP_SACK_TIMEOUT		 = 16,
+	NET_SCTP_RCVBUF_POLICY		 = 17,
+};
+
+/* /proc/sys/net/bridge */
+enum {
+	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
+	NET_BRIDGE_NF_CALL_IPTABLES = 2,
+	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
+	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
+	NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
+};
+
+/* proc/sys/net/irda */
+enum {
+	NET_IRDA_DISCOVERY=1,
+	NET_IRDA_DEVNAME=2,
+	NET_IRDA_DEBUG=3,
+	NET_IRDA_FAST_POLL=4,
+	NET_IRDA_DISCOVERY_SLOTS=5,
+	NET_IRDA_DISCOVERY_TIMEOUT=6,
+	NET_IRDA_SLOT_TIMEOUT=7,
+	NET_IRDA_MAX_BAUD_RATE=8,
+	NET_IRDA_MIN_TX_TURN_TIME=9,
+	NET_IRDA_MAX_TX_DATA_SIZE=10,
+	NET_IRDA_MAX_TX_WINDOW=11,
+	NET_IRDA_MAX_NOREPLY_TIME=12,
+	NET_IRDA_WARN_NOREPLY_TIME=13,
+	NET_IRDA_LAP_KEEPALIVE_TIME=14,
+};
+
+
+/* CTL_FS names: */
+enum
+{
+	FS_NRINODE=1,	/* int:current number of allocated inodes */
+	FS_STATINODE=2,
+	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
+	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
+	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
+	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
+	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
+	FS_DENTRY=8,
+	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
+	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
+	FS_OVERFLOWUID=11,	/* int: overflow UID */
+	FS_OVERFLOWGID=12,	/* int: overflow GID */
+	FS_LEASES=13,	/* int: leases enabled */
+	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
+	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
+	FS_DQSTATS=16,	/* disc quota usage statistics and control */
+	FS_XFS=17,	/* struct: control xfs parameters */
+	FS_AIO_NR=18,	/* current system-wide number of aio requests */
+	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
+	FS_INOTIFY=20,	/* inotify submenu */
+	FS_OCFS2=988,	/* ocfs2 */
+};
+
+/* /proc/sys/fs/quota/ */
+enum {
+	FS_DQ_LOOKUPS = 1,
+	FS_DQ_DROPS = 2,
+	FS_DQ_READS = 3,
+	FS_DQ_WRITES = 4,
+	FS_DQ_CACHE_HITS = 5,
+	FS_DQ_ALLOCATED = 6,
+	FS_DQ_FREE = 7,
+	FS_DQ_SYNCS = 8,
+	FS_DQ_WARNINGS = 9,
+};
+
+/* CTL_DEBUG names: */
+
+/* CTL_DEV names: */
+enum {
+	DEV_CDROM=1,
+	DEV_HWMON=2,
+	DEV_PARPORT=3,
+	DEV_RAID=4,
+	DEV_MAC_HID=5,
+	DEV_SCSI=6,
+	DEV_IPMI=7,
+};
+
+/* /proc/sys/dev/cdrom */
+enum {
+	DEV_CDROM_INFO=1,
+	DEV_CDROM_AUTOCLOSE=2,
+	DEV_CDROM_AUTOEJECT=3,
+	DEV_CDROM_DEBUG=4,
+	DEV_CDROM_LOCK=5,
+	DEV_CDROM_CHECK_MEDIA=6
+};
+
+/* /proc/sys/dev/parport */
+enum {
+	DEV_PARPORT_DEFAULT=-3
+};
+
+/* /proc/sys/dev/raid */
+enum {
+	DEV_RAID_SPEED_LIMIT_MIN=1,
+	DEV_RAID_SPEED_LIMIT_MAX=2
+};
+
+/* /proc/sys/dev/parport/default */
+enum {
+	DEV_PARPORT_DEFAULT_TIMESLICE=1,
+	DEV_PARPORT_DEFAULT_SPINTIME=2
+};
+
+/* /proc/sys/dev/parport/parport n */
+enum {
+	DEV_PARPORT_SPINTIME=1,
+	DEV_PARPORT_BASE_ADDR=2,
+	DEV_PARPORT_IRQ=3,
+	DEV_PARPORT_DMA=4,
+	DEV_PARPORT_MODES=5,
+	DEV_PARPORT_DEVICES=6,
+	DEV_PARPORT_AUTOPROBE=16
+};
+
+/* /proc/sys/dev/parport/parport n/devices/ */
+enum {
+	DEV_PARPORT_DEVICES_ACTIVE=-3,
+};
+
+/* /proc/sys/dev/parport/parport n/devices/device n */
+enum {
+	DEV_PARPORT_DEVICE_TIMESLICE=1,
+};
+
+/* /proc/sys/dev/mac_hid */
+enum {
+	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
+	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
+	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
+	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
+	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
+	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
+};
+
+/* /proc/sys/dev/scsi */
+enum {
+	DEV_SCSI_LOGGING_LEVEL=1,
+};
+
+/* /proc/sys/dev/ipmi */
+enum {
+	DEV_IPMI_POWEROFF_POWERCYCLE=1,
+};
+
+/* /proc/sys/abi */
+enum
+{
+	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
+	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
+	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
+	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
+	ABI_TRACE=5,		/* tracing flags */
+	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
+};
+
+
+#endif /* _UAPI_LINUX_SYSCTL_H */
diff --git a/include/linux/sysinfo.h b/include/uapi/linux/sysinfo.h
similarity index 100%
rename from include/linux/sysinfo.h
rename to include/uapi/linux/sysinfo.h
diff --git a/include/linux/taskstats.h b/include/uapi/linux/taskstats.h
similarity index 100%
rename from include/linux/taskstats.h
rename to include/uapi/linux/taskstats.h
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
new file mode 100644
index 0000000000000000000000000000000000000000..c4b89a5cb7df4ffa3f93a0206e1f03bf19829d31
--- /dev/null
+++ b/include/uapi/linux/tcp.h
@@ -0,0 +1,225 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the TCP protocol.
+ *
+ * Version:	@(#)tcp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_TCP_H
+#define _UAPI_LINUX_TCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+struct tcphdr {
+	__be16	source;
+	__be16	dest;
+	__be32	seq;
+	__be32	ack_seq;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u16	res1:4,
+		doff:4,
+		fin:1,
+		syn:1,
+		rst:1,
+		psh:1,
+		ack:1,
+		urg:1,
+		ece:1,
+		cwr:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u16	doff:4,
+		res1:4,
+		cwr:1,
+		ece:1,
+		urg:1,
+		ack:1,
+		psh:1,
+		rst:1,
+		syn:1,
+		fin:1;
+#else
+#error	"Adjust your <asm/byteorder.h> defines"
+#endif	
+	__be16	window;
+	__sum16	check;
+	__be16	urg_ptr;
+};
+
+/*
+ *	The union cast uses a gcc extension to avoid aliasing problems
+ *  (union is compatible to any of its members)
+ *  This means this part of the code is -fstrict-aliasing safe now.
+ */
+union tcp_word_hdr { 
+	struct tcphdr hdr;
+	__be32 		  words[5];
+}; 
+
+#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+
+enum { 
+	TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
+	TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
+	TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
+	TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
+	TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
+	TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
+	TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
+	TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
+	TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
+	TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
+}; 
+
+/*
+ * TCP general constants
+ */
+#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
+#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
+
+/* TCP socket options */
+#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
+#define TCP_MAXSEG		2	/* Limit MSS */
+#define TCP_CORK		3	/* Never send partially complete segments */
+#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
+#define TCP_KEEPINTVL		5	/* Interval between keepalives */
+#define TCP_KEEPCNT		6	/* Number of keepalives before death */
+#define TCP_SYNCNT		7	/* Number of SYN retransmits */
+#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
+#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
+#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
+#define TCP_INFO		11	/* Information about this connection. */
+#define TCP_QUICKACK		12	/* Block/reenable quick acks */
+#define TCP_CONGESTION		13	/* Congestion control algorithm */
+#define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
+#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
+#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
+#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
+#define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
+#define TCP_REPAIR		19	/* TCP sock is under repair right now */
+#define TCP_REPAIR_QUEUE	20
+#define TCP_QUEUE_SEQ		21
+#define TCP_REPAIR_OPTIONS	22
+#define TCP_FASTOPEN		23	/* Enable FastOpen on listeners */
+
+struct tcp_repair_opt {
+	__u32	opt_code;
+	__u32	opt_val;
+};
+
+enum {
+	TCP_NO_QUEUE,
+	TCP_RECV_QUEUE,
+	TCP_SEND_QUEUE,
+	TCP_QUEUES_NR,
+};
+
+/* for TCP_INFO socket option */
+#define TCPI_OPT_TIMESTAMPS	1
+#define TCPI_OPT_SACK		2
+#define TCPI_OPT_WSCALE		4
+#define TCPI_OPT_ECN		8 /* ECN was negociated at TCP session init */
+#define TCPI_OPT_ECN_SEEN	16 /* we received at least one packet with ECT */
+
+enum tcp_ca_state {
+	TCP_CA_Open = 0,
+#define TCPF_CA_Open	(1<<TCP_CA_Open)
+	TCP_CA_Disorder = 1,
+#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
+	TCP_CA_CWR = 2,
+#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
+	TCP_CA_Recovery = 3,
+#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
+	TCP_CA_Loss = 4
+#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
+};
+
+struct tcp_info {
+	__u8	tcpi_state;
+	__u8	tcpi_ca_state;
+	__u8	tcpi_retransmits;
+	__u8	tcpi_probes;
+	__u8	tcpi_backoff;
+	__u8	tcpi_options;
+	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
+
+	__u32	tcpi_rto;
+	__u32	tcpi_ato;
+	__u32	tcpi_snd_mss;
+	__u32	tcpi_rcv_mss;
+
+	__u32	tcpi_unacked;
+	__u32	tcpi_sacked;
+	__u32	tcpi_lost;
+	__u32	tcpi_retrans;
+	__u32	tcpi_fackets;
+
+	/* Times. */
+	__u32	tcpi_last_data_sent;
+	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
+	__u32	tcpi_last_data_recv;
+	__u32	tcpi_last_ack_recv;
+
+	/* Metrics. */
+	__u32	tcpi_pmtu;
+	__u32	tcpi_rcv_ssthresh;
+	__u32	tcpi_rtt;
+	__u32	tcpi_rttvar;
+	__u32	tcpi_snd_ssthresh;
+	__u32	tcpi_snd_cwnd;
+	__u32	tcpi_advmss;
+	__u32	tcpi_reordering;
+
+	__u32	tcpi_rcv_rtt;
+	__u32	tcpi_rcv_space;
+
+	__u32	tcpi_total_retrans;
+};
+
+/* for TCP_MD5SIG socket option */
+#define TCP_MD5SIG_MAXKEYLEN	80
+
+struct tcp_md5sig {
+	struct __kernel_sockaddr_storage tcpm_addr;	/* address associated */
+	__u16	__tcpm_pad1;				/* zero */
+	__u16	tcpm_keylen;				/* key length */
+	__u32	__tcpm_pad2;				/* zero */
+	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
+};
+
+/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
+#define TCP_COOKIE_MIN		 8		/*  64-bits */
+#define TCP_COOKIE_MAX		16		/* 128-bits */
+#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
+
+/* Flags for both getsockopt and setsockopt */
+#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
+#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
+						 * supercedes everything. */
+
+/* Flags for getsockopt */
+#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
+#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
+
+/* TCP_COOKIE_TRANSACTIONS data */
+struct tcp_cookie_transactions {
+	__u16	tcpct_flags;			/* see above */
+	__u8	__tcpct_pad1;			/* zero */
+	__u8	tcpct_cookie_desired;		/* bytes */
+	__u16	tcpct_s_data_desired;		/* bytes of variable data */
+	__u16	tcpct_used;			/* bytes in value */
+	__u8	tcpct_value[TCP_MSS_DEFAULT];
+};
+
+
+#endif /* _UAPI_LINUX_TCP_H */
diff --git a/include/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h
similarity index 100%
rename from include/linux/tcp_metrics.h
rename to include/uapi/linux/tcp_metrics.h
diff --git a/include/linux/telephony.h b/include/uapi/linux/telephony.h
similarity index 100%
rename from include/linux/telephony.h
rename to include/uapi/linux/telephony.h
diff --git a/include/linux/termios.h b/include/uapi/linux/termios.h
similarity index 100%
rename from include/linux/termios.h
rename to include/uapi/linux/termios.h
diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h
new file mode 100644
index 0000000000000000000000000000000000000000..0d3c0edc3edaeaef405d7f208e424cc5f3fda2be
--- /dev/null
+++ b/include/uapi/linux/time.h
@@ -0,0 +1,71 @@
+#ifndef _UAPI_LINUX_TIME_H
+#define _UAPI_LINUX_TIME_H
+
+#include <linux/types.h>
+
+
+#ifndef _STRUCT_TIMESPEC
+#define _STRUCT_TIMESPEC
+struct timespec {
+	__kernel_time_t	tv_sec;			/* seconds */
+	long		tv_nsec;		/* nanoseconds */
+};
+#endif
+
+struct timeval {
+	__kernel_time_t		tv_sec;		/* seconds */
+	__kernel_suseconds_t	tv_usec;	/* microseconds */
+};
+
+struct timezone {
+	int	tz_minuteswest;	/* minutes west of Greenwich */
+	int	tz_dsttime;	/* type of dst correction */
+};
+
+
+/*
+ * Names of the interval timers, and structure
+ * defining a timer setting:
+ */
+#define	ITIMER_REAL		0
+#define	ITIMER_VIRTUAL		1
+#define	ITIMER_PROF		2
+
+struct itimerspec {
+	struct timespec it_interval;	/* timer period */
+	struct timespec it_value;	/* timer expiration */
+};
+
+struct itimerval {
+	struct timeval it_interval;	/* timer interval */
+	struct timeval it_value;	/* current value */
+};
+
+/*
+ * The IDs of the various system clocks (for POSIX.1b interval timers):
+ */
+#define CLOCK_REALTIME			0
+#define CLOCK_MONOTONIC			1
+#define CLOCK_PROCESS_CPUTIME_ID	2
+#define CLOCK_THREAD_CPUTIME_ID		3
+#define CLOCK_MONOTONIC_RAW		4
+#define CLOCK_REALTIME_COARSE		5
+#define CLOCK_MONOTONIC_COARSE		6
+#define CLOCK_BOOTTIME			7
+#define CLOCK_REALTIME_ALARM		8
+#define CLOCK_BOOTTIME_ALARM		9
+
+/*
+ * The IDs of various hardware clocks:
+ */
+#define CLOCK_SGI_CYCLE			10
+#define MAX_CLOCKS			16
+#define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
+#define CLOCKS_MONO			CLOCK_MONOTONIC
+
+/*
+ * The various flags for setting POSIX.1b interval timers:
+ */
+#define TIMER_ABSTIME			0x01
+
+#endif /* _UAPI_LINUX_TIME_H */
diff --git a/include/linux/times.h b/include/uapi/linux/times.h
similarity index 100%
rename from include/linux/times.h
rename to include/uapi/linux/times.h
diff --git a/include/uapi/linux/timex.h b/include/uapi/linux/timex.h
new file mode 100644
index 0000000000000000000000000000000000000000..a7ea81f13711e80f68cf52b6a626d7a09461886e
--- /dev/null
+++ b/include/uapi/linux/timex.h
@@ -0,0 +1,166 @@
+/*****************************************************************************
+ *                                                                           *
+ * Copyright (c) David L. Mills 1993                                         *
+ *                                                                           *
+ * Permission to use, copy, modify, and distribute this software and its     *
+ * documentation for any purpose and without fee is hereby granted, provided *
+ * that the above copyright notice appears in all copies and that both the   *
+ * copyright notice and this permission notice appear in supporting          *
+ * documentation, and that the name University of Delaware not be used in    *
+ * advertising or publicity pertaining to distribution of the software       *
+ * without specific, written prior permission.  The University of Delaware   *
+ * makes no representations about the suitability this software for any      *
+ * purpose.  It is provided "as is" without express or implied warranty.     *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ * Modification history timex.h
+ *
+ * 29 Dec 97	Russell King
+ *	Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
+ *	for ARM machines
+ *
+ *  9 Jan 97    Adrian Sun
+ *      Shifted LATCH define to allow access to alpha machines.
+ *
+ * 26 Sep 94	David L. Mills
+ *	Added defines for hybrid phase/frequency-lock loop.
+ *
+ * 19 Mar 94	David L. Mills
+ *	Moved defines from kernel routines to header file and added new
+ *	defines for PPS phase-lock loop.
+ *
+ * 20 Feb 94	David L. Mills
+ *	Revised status codes and structures for external clock and PPS
+ *	signal discipline.
+ *
+ * 28 Nov 93	David L. Mills
+ *	Adjusted parameters to improve stability and increase poll
+ *	interval.
+ *
+ * 17 Sep 93    David L. Mills
+ *      Created file $NTP/include/sys/timex.h
+ * 07 Oct 93    Torsten Duwe
+ *      Derived linux/timex.h
+ * 1995-08-13    Torsten Duwe
+ *      kernel PLL updated to 1994-12-13 specs (rfc-1589)
+ * 1997-08-30    Ulrich Windl
+ *      Added new constant NTP_PHASE_LIMIT
+ * 2004-08-12    Christoph Lameter
+ *      Reworked time interpolation logic
+ */
+#ifndef _UAPI_LINUX_TIMEX_H
+#define _UAPI_LINUX_TIMEX_H
+
+#include <linux/time.h>
+
+#define NTP_API		4	/* NTP API version */
+
+/*
+ * syscall interface - used (mainly by NTP daemon)
+ * to discipline kernel clock oscillator
+ */
+struct timex {
+	unsigned int modes;	/* mode selector */
+	long offset;		/* time offset (usec) */
+	long freq;		/* frequency offset (scaled ppm) */
+	long maxerror;		/* maximum error (usec) */
+	long esterror;		/* estimated error (usec) */
+	int status;		/* clock command/status */
+	long constant;		/* pll time constant */
+	long precision;		/* clock precision (usec) (read only) */
+	long tolerance;		/* clock frequency tolerance (ppm)
+				 * (read only)
+				 */
+	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
+	long tick;		/* (modified) usecs between clock ticks */
+
+	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
+	long jitter;            /* pps jitter (us) (ro) */
+	int shift;              /* interval duration (s) (shift) (ro) */
+	long stabil;            /* pps stability (scaled ppm) (ro) */
+	long jitcnt;            /* jitter limit exceeded (ro) */
+	long calcnt;            /* calibration intervals (ro) */
+	long errcnt;            /* calibration errors (ro) */
+	long stbcnt;            /* stability limit exceeded (ro) */
+
+	int tai;		/* TAI offset (ro) */
+
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32;
+};
+
+/*
+ * Mode codes (timex.mode)
+ */
+#define ADJ_OFFSET		0x0001	/* time offset */
+#define ADJ_FREQUENCY		0x0002	/* frequency offset */
+#define ADJ_MAXERROR		0x0004	/* maximum time error */
+#define ADJ_ESTERROR		0x0008	/* estimated time error */
+#define ADJ_STATUS		0x0010	/* clock status */
+#define ADJ_TIMECONST		0x0020	/* pll time constant */
+#define ADJ_TAI			0x0080	/* set TAI offset */
+#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
+#define ADJ_MICRO		0x1000	/* select microsecond resolution */
+#define ADJ_NANO		0x2000	/* select nanosecond resolution */
+#define ADJ_TICK		0x4000	/* tick value */
+
+#ifndef __KERNEL__
+#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
+#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
+#endif
+
+/* NTP userland likes the MOD_ prefix better */
+#define MOD_OFFSET	ADJ_OFFSET
+#define MOD_FREQUENCY	ADJ_FREQUENCY
+#define MOD_MAXERROR	ADJ_MAXERROR
+#define MOD_ESTERROR	ADJ_ESTERROR
+#define MOD_STATUS	ADJ_STATUS
+#define MOD_TIMECONST	ADJ_TIMECONST
+#define MOD_TAI	ADJ_TAI
+#define MOD_MICRO	ADJ_MICRO
+#define MOD_NANO	ADJ_NANO
+
+
+/*
+ * Status codes (timex.status)
+ */
+#define STA_PLL		0x0001	/* enable PLL updates (rw) */
+#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
+#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
+#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
+
+#define STA_INS		0x0010	/* insert leap (rw) */
+#define STA_DEL		0x0020	/* delete leap (rw) */
+#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
+#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
+
+#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
+#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
+#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
+#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
+
+#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
+#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
+
+/* read-only bits */
+#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
+	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
+
+/*
+ * Clock states (time_state)
+ */
+#define TIME_OK		0	/* clock synchronized, no leap second */
+#define TIME_INS	1	/* insert leap second */
+#define TIME_DEL	2	/* delete leap second */
+#define TIME_OOP	3	/* leap second in progress */
+#define TIME_WAIT	4	/* leap second has occurred */
+#define TIME_ERROR	5	/* clock not synchronized */
+#define TIME_BAD	TIME_ERROR /* bw compat */
+
+
+#endif /* _UAPI_LINUX_TIMEX_H */
diff --git a/include/linux/tiocl.h b/include/uapi/linux/tiocl.h
similarity index 100%
rename from include/linux/tiocl.h
rename to include/uapi/linux/tiocl.h
diff --git a/include/linux/tipc.h b/include/uapi/linux/tipc.h
similarity index 100%
rename from include/linux/tipc.h
rename to include/uapi/linux/tipc.h
diff --git a/include/linux/tipc_config.h b/include/uapi/linux/tipc_config.h
similarity index 100%
rename from include/linux/tipc_config.h
rename to include/uapi/linux/tipc_config.h
diff --git a/include/uapi/linux/toshiba.h b/include/uapi/linux/toshiba.h
new file mode 100644
index 0000000000000000000000000000000000000000..e9bef5b2f91ebf61b1d244322d911e111c794a4f
--- /dev/null
+++ b/include/uapi/linux/toshiba.h
@@ -0,0 +1,37 @@
+/* toshiba.h -- Linux driver for accessing the SMM on Toshiba laptops 
+ *
+ * Copyright (c) 1996-2000  Jonathan A. Buzzard (jonathan@buzzard.org.uk)
+ *
+ * Thanks to Juergen Heinzl <juergen@monocerus.demon.co.uk> for the pointers
+ * on making sure the structure is aligned and packed.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef _UAPI_LINUX_TOSHIBA_H
+#define _UAPI_LINUX_TOSHIBA_H
+
+#define TOSH_PROC "/proc/toshiba"
+#define TOSH_DEVICE "/dev/toshiba"
+#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
+
+typedef struct {
+	unsigned int eax;
+	unsigned int ebx __attribute__ ((packed));
+	unsigned int ecx __attribute__ ((packed));
+	unsigned int edx __attribute__ ((packed));
+	unsigned int esi __attribute__ ((packed));
+	unsigned int edi __attribute__ ((packed));
+} SMMRegisters;
+
+
+#endif /* _UAPI_LINUX_TOSHIBA_H */
diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h
new file mode 100644
index 0000000000000000000000000000000000000000..dac199a2dba54ef85bbbc206a4fa2f268dfcbbe4
--- /dev/null
+++ b/include/uapi/linux/tty.h
@@ -0,0 +1,38 @@
+#ifndef _UAPI_LINUX_TTY_H
+#define _UAPI_LINUX_TTY_H
+
+/*
+ * 'tty.h' defines some structures used by tty_io.c and some defines.
+ */
+
+#define NR_LDISCS		30
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
+				/* cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15	/* Bluetooth HCI UART */
+#define N_GIGASET_M101	16	/* Siemens Gigaset M101 serial DECT adapter */
+#define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
+#define N_PPS		18	/* Pulse per Second */
+#define N_V253		19	/* Codec control over voice modem */
+#define N_CAIF		20      /* CAIF protocol for talking to modems */
+#define N_GSM0710	21	/* GSM 0710 Mux */
+#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
+#define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
+#define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
+
+#endif /* _UAPI_LINUX_TTY_H */
diff --git a/include/linux/tty_flags.h b/include/uapi/linux/tty_flags.h
similarity index 100%
rename from include/linux/tty_flags.h
rename to include/uapi/linux/tty_flags.h
diff --git a/include/uapi/linux/types.h b/include/uapi/linux/types.h
new file mode 100644
index 0000000000000000000000000000000000000000..acf0979b790afd5faa66d4bcca5242afb4678ec3
--- /dev/null
+++ b/include/uapi/linux/types.h
@@ -0,0 +1,56 @@
+#ifndef _UAPI_LINUX_TYPES_H
+#define _UAPI_LINUX_TYPES_H
+
+#include <asm/types.h>
+
+#ifndef __ASSEMBLY__
+#ifndef	__KERNEL__
+#ifndef __EXPORTED_HEADERS__
+#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
+#endif /* __EXPORTED_HEADERS__ */
+#endif
+
+#include <linux/posix_types.h>
+
+
+/*
+ * Below are truly Linux-specific types that should never collide with
+ * any application/library that wants linux/types.h.
+ */
+
+#ifdef __CHECKER__
+#define __bitwise__ __attribute__((bitwise))
+#else
+#define __bitwise__
+#endif
+#ifdef __CHECK_ENDIAN__
+#define __bitwise __bitwise__
+#else
+#define __bitwise
+#endif
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+
+/*
+ * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
+ * common 32/64-bit compat problems.
+ * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
+ * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
+ * aligned_64 type enforces 8-byte alignment so that structs containing
+ * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
+ * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
+ */
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+#define __aligned_be64 __be64 __attribute__((aligned(8)))
+#define __aligned_le64 __le64 __attribute__((aligned(8)))
+
+#endif /*  __ASSEMBLY__ */
+#endif /* _UAPI_LINUX_TYPES_H */
diff --git a/include/linux/udf_fs_i.h b/include/uapi/linux/udf_fs_i.h
similarity index 100%
rename from include/linux/udf_fs_i.h
rename to include/uapi/linux/udf_fs_i.h
diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h
new file mode 100644
index 0000000000000000000000000000000000000000..e2bcfd75a30d38d37475cef6e0382e1081d5a3b0
--- /dev/null
+++ b/include/uapi/linux/udp.h
@@ -0,0 +1,39 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the UDP protocol.
+ *
+ * Version:	@(#)udp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_UDP_H
+#define _UAPI_LINUX_UDP_H
+
+#include <linux/types.h>
+
+struct udphdr {
+	__be16	source;
+	__be16	dest;
+	__be16	len;
+	__sum16	check;
+};
+
+/* UDP socket options */
+#define UDP_CORK	1	/* Never send partially complete segments */
+#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
+
+/* UDP encapsulation types */
+#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
+#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
+#define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
+
+
+#endif /* _UAPI_LINUX_UDP_H */
diff --git a/include/linux/uhid.h b/include/uapi/linux/uhid.h
similarity index 100%
rename from include/linux/uhid.h
rename to include/uapi/linux/uhid.h
diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h
new file mode 100644
index 0000000000000000000000000000000000000000..fe46431593f9a431e8e24712af36b98b3f78293a
--- /dev/null
+++ b/include/uapi/linux/uinput.h
@@ -0,0 +1,137 @@
+/*
+ *  User level driver support for input subsystem
+ *
+ * Heavily based on evdev.c by Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
+ *
+ * Changes/Revisions:
+ *	0.3	24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>)
+ *		- update ff support for the changes in kernel interface
+ *		- add UINPUT_VERSION
+ *	0.2	16/10/2004 (Micah Dowty <micah@navi.cx>)
+ *		- added force feedback support
+ *             - added UI_SET_PHYS
+ *	0.1	20/06/2002
+ *		- first public version
+ */
+#ifndef _UAPI__UINPUT_H_
+#define _UAPI__UINPUT_H_
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define UINPUT_VERSION		3
+
+
+struct uinput_ff_upload {
+	__u32			request_id;
+	__s32			retval;
+	struct ff_effect	effect;
+	struct ff_effect	old;
+};
+
+struct uinput_ff_erase {
+	__u32			request_id;
+	__s32			retval;
+	__u32			effect_id;
+};
+
+/* ioctl */
+#define UINPUT_IOCTL_BASE	'U'
+#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
+#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
+
+#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
+#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
+#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
+#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
+#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
+#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
+#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
+#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
+#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
+#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
+#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
+
+#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
+#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
+#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
+#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
+
+/*
+ * To write a force-feedback-capable driver, the upload_effect
+ * and erase_effect callbacks in input_dev must be implemented.
+ * The uinput driver will generate a fake input event when one of
+ * these callbacks are invoked. The userspace code then uses
+ * ioctls to retrieve additional parameters and send the return code.
+ * The callback blocks until this return code is sent.
+ *
+ * The described callback mechanism is only used if ff_effects_max
+ * is set.
+ *
+ * To implement upload_effect():
+ *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_upload struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
+ *      uinput_ff_upload struct. It will be filled in with the
+ *      ff_effects passed to upload_effect().
+ *   4. Perform the effect upload, and place a return code back into
+        the uinput_ff_upload struct.
+ *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
+ *      uinput_ff_upload_effect struct. This will complete execution
+ *      of our upload_effect() handler.
+ *
+ * To implement erase_effect():
+ *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_erase struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
+ *      uinput_ff_erase struct. It will be filled in with the
+ *      effect ID passed to erase_effect().
+ *   4. Perform the effect erasure, and place a return code back
+ *      into the uinput_ff_erase struct.
+ *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
+ *      uinput_ff_erase_effect struct. This will complete execution
+ *      of our erase_effect() handler.
+ */
+
+/*
+ * This is the new event type, used only by uinput.
+ * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
+ * is the unique request ID. This number was picked
+ * arbitrarily, above EV_MAX (since the input system
+ * never sees it) but in the range of a 16-bit int.
+ */
+#define EV_UINPUT		0x0101
+#define UI_FF_UPLOAD		1
+#define UI_FF_ERASE		2
+
+#define UINPUT_MAX_NAME_SIZE	80
+struct uinput_user_dev {
+	char name[UINPUT_MAX_NAME_SIZE];
+	struct input_id id;
+	__u32 ff_effects_max;
+	__s32 absmax[ABS_CNT];
+	__s32 absmin[ABS_CNT];
+	__s32 absfuzz[ABS_CNT];
+	__s32 absflat[ABS_CNT];
+};
+#endif /* _UAPI__UINPUT_H_ */
diff --git a/include/uapi/linux/uio.h b/include/uapi/linux/uio.h
new file mode 100644
index 0000000000000000000000000000000000000000..2731d56a548462b2f1c044fe83f8e3fe7bffbdb4
--- /dev/null
+++ b/include/uapi/linux/uio.h
@@ -0,0 +1,30 @@
+/*
+ *	Berkeley style UIO structures	-	Alan Cox 1994.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI__LINUX_UIO_H
+#define _UAPI__LINUX_UIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+struct iovec
+{
+	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
+	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
+};
+
+/*
+ *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
+ */
+ 
+#define UIO_FASTIOV	8
+#define UIO_MAXIOV	1024
+
+
+#endif /* _UAPI__LINUX_UIO_H */
diff --git a/include/linux/ultrasound.h b/include/uapi/linux/ultrasound.h
similarity index 100%
rename from include/linux/ultrasound.h
rename to include/uapi/linux/ultrasound.h
diff --git a/include/linux/un.h b/include/uapi/linux/un.h
similarity index 100%
rename from include/linux/un.h
rename to include/uapi/linux/un.h
diff --git a/include/linux/unistd.h b/include/uapi/linux/unistd.h
similarity index 100%
rename from include/linux/unistd.h
rename to include/uapi/linux/unistd.h
diff --git a/include/linux/unix_diag.h b/include/uapi/linux/unix_diag.h
similarity index 100%
rename from include/linux/unix_diag.h
rename to include/uapi/linux/unix_diag.h
diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h
new file mode 100644
index 0000000000000000000000000000000000000000..0c65e4b1261717f71b7bdeef94da72b608eec392
--- /dev/null
+++ b/include/uapi/linux/usbdevice_fs.h
@@ -0,0 +1,180 @@
+/*****************************************************************************/
+
+/*
+ *	usbdevice_fs.h  --  USB device file system.
+ *
+ *	Copyright (C) 2000
+ *          Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History:
+ *   0.1  04.01.2000  Created
+ */
+
+/*****************************************************************************/
+
+#ifndef _UAPI_LINUX_USBDEVICE_FS_H
+#define _UAPI_LINUX_USBDEVICE_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* --------------------------------------------------------------------- */
+
+/* usbdevfs ioctl codes */
+
+struct usbdevfs_ctrltransfer {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+	__u32 timeout;  /* in milliseconds */
+ 	void __user *data;
+};
+
+struct usbdevfs_bulktransfer {
+	unsigned int ep;
+	unsigned int len;
+	unsigned int timeout; /* in milliseconds */
+	void __user *data;
+};
+
+struct usbdevfs_setinterface {
+	unsigned int interface;
+	unsigned int altsetting;
+};
+
+struct usbdevfs_disconnectsignal {
+	unsigned int signr;
+	void __user *context;
+};
+
+#define USBDEVFS_MAXDRIVERNAME 255
+
+struct usbdevfs_getdriver {
+	unsigned int interface;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+struct usbdevfs_connectinfo {
+	unsigned int devnum;
+	unsigned char slow;
+};
+
+#define USBDEVFS_URB_SHORT_NOT_OK	0x01
+#define USBDEVFS_URB_ISO_ASAP		0x02
+#define USBDEVFS_URB_BULK_CONTINUATION	0x04
+#define USBDEVFS_URB_NO_FSBR		0x20
+#define USBDEVFS_URB_ZERO_PACKET	0x40
+#define USBDEVFS_URB_NO_INTERRUPT	0x80
+
+#define USBDEVFS_URB_TYPE_ISO		   0
+#define USBDEVFS_URB_TYPE_INTERRUPT	   1
+#define USBDEVFS_URB_TYPE_CONTROL	   2
+#define USBDEVFS_URB_TYPE_BULK		   3
+
+struct usbdevfs_iso_packet_desc {
+	unsigned int length;
+	unsigned int actual_length;
+	unsigned int status;
+};
+
+struct usbdevfs_urb {
+	unsigned char type;
+	unsigned char endpoint;
+	int status;
+	unsigned int flags;
+	void __user *buffer;
+	int buffer_length;
+	int actual_length;
+	int start_frame;
+	int number_of_packets;
+	int error_count;
+	unsigned int signr;	/* signal to be sent on completion,
+				  or 0 if none should be sent. */
+	void __user *usercontext;
+	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
+};
+
+/* ioctls for talking directly to drivers */
+struct usbdevfs_ioctl {
+	int	ifno;		/* interface 0..N ; negative numbers reserved */
+	int	ioctl_code;	/* MUST encode size + direction of data so the
+				 * macros in <asm/ioctl.h> give correct values */
+	void __user *data;	/* param buffer (in, or out) */
+};
+
+/* You can do most things with hubs just through control messages,
+ * except find out what device connects to what port. */
+struct usbdevfs_hub_portinfo {
+	char nports;		/* number of downstream ports in this hub */
+	char port [127];	/* e.g. port 3 connects to device 27 */
+};
+
+/* Device capability flags */
+#define USBDEVFS_CAP_ZERO_PACKET		0x01
+#define USBDEVFS_CAP_BULK_CONTINUATION		0x02
+#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM		0x04
+#define USBDEVFS_CAP_BULK_SCATTER_GATHER	0x08
+
+/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
+
+/* disconnect-and-claim if the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER	0x01
+/* disconnect-and-claim except when the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER	0x02
+
+struct usbdevfs_disconnect_claim {
+	unsigned int interface;
+	unsigned int flags;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+
+#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
+#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
+#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
+#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
+#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
+#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
+#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
+#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
+#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
+#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
+#define USBDEVFS_DISCARDURB        _IO('U', 11)
+#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
+#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
+#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
+#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
+#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
+#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
+#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
+#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
+#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
+#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
+#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
+#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
+#define USBDEVFS_RESET             _IO('U', 20)
+#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
+#define USBDEVFS_DISCONNECT        _IO('U', 22)
+#define USBDEVFS_CONNECT           _IO('U', 23)
+#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
+#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
+#define USBDEVFS_GET_CAPABILITIES  _IOR('U', 26, __u32)
+#define USBDEVFS_DISCONNECT_CLAIM  _IOR('U', 27, struct usbdevfs_disconnect_claim)
+
+#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/utime.h b/include/uapi/linux/utime.h
similarity index 100%
rename from include/linux/utime.h
rename to include/uapi/linux/utime.h
diff --git a/include/uapi/linux/utsname.h b/include/uapi/linux/utsname.h
new file mode 100644
index 0000000000000000000000000000000000000000..872c2df10de7ba4a3ee62d819ff2e270616920d5
--- /dev/null
+++ b/include/uapi/linux/utsname.h
@@ -0,0 +1,34 @@
+#ifndef _UAPI_LINUX_UTSNAME_H
+#define _UAPI_LINUX_UTSNAME_H
+
+#define __OLD_UTS_LEN 8
+
+struct oldold_utsname {
+	char sysname[9];
+	char nodename[9];
+	char release[9];
+	char version[9];
+	char machine[9];
+};
+
+#define __NEW_UTS_LEN 64
+
+struct old_utsname {
+	char sysname[65];
+	char nodename[65];
+	char release[65];
+	char version[65];
+	char machine[65];
+};
+
+struct new_utsname {
+	char sysname[__NEW_UTS_LEN + 1];
+	char nodename[__NEW_UTS_LEN + 1];
+	char release[__NEW_UTS_LEN + 1];
+	char version[__NEW_UTS_LEN + 1];
+	char machine[__NEW_UTS_LEN + 1];
+	char domainname[__NEW_UTS_LEN + 1];
+};
+
+
+#endif /* _UAPI_LINUX_UTSNAME_H */
diff --git a/include/uapi/linux/uuid.h b/include/uapi/linux/uuid.h
new file mode 100644
index 0000000000000000000000000000000000000000..786f0773cc33960344c487379046222107b35740
--- /dev/null
+++ b/include/uapi/linux/uuid.h
@@ -0,0 +1,58 @@
+/*
+ * UUID/GUID definition
+ *
+ * Copyright (C) 2010, Intel Corp.
+ *	Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _UAPI_LINUX_UUID_H_
+#define _UAPI_LINUX_UUID_H_
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef struct {
+	__u8 b[16];
+} uuid_le;
+
+typedef struct {
+	__u8 b[16];
+} uuid_be;
+
+#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
+((uuid_le)								\
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+   (b) & 0xff, ((b) >> 8) & 0xff,					\
+   (c) & 0xff, ((c) >> 8) & 0xff,					\
+   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
+((uuid_be)								\
+{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
+   ((b) >> 8) & 0xff, (b) & 0xff,					\
+   ((c) >> 8) & 0xff, (c) & 0xff,					\
+   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define NULL_UUID_LE							\
+	UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
+		0x00, 0x00, 0x00, 0x00)
+
+#define NULL_UUID_BE							\
+	UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
+		0x00, 0x00, 0x00, 0x00)
+
+
+#endif /* _UAPI_LINUX_UUID_H_ */
diff --git a/include/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h
similarity index 100%
rename from include/linux/uvcvideo.h
rename to include/uapi/linux/uvcvideo.h
diff --git a/include/linux/v4l2-common.h b/include/uapi/linux/v4l2-common.h
similarity index 100%
rename from include/linux/v4l2-common.h
rename to include/uapi/linux/v4l2-common.h
diff --git a/include/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
similarity index 100%
rename from include/linux/v4l2-controls.h
rename to include/uapi/linux/v4l2-controls.h
diff --git a/include/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h
similarity index 100%
rename from include/linux/v4l2-dv-timings.h
rename to include/uapi/linux/v4l2-dv-timings.h
diff --git a/include/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h
similarity index 100%
rename from include/linux/v4l2-mediabus.h
rename to include/uapi/linux/v4l2-mediabus.h
diff --git a/include/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h
similarity index 100%
rename from include/linux/v4l2-subdev.h
rename to include/uapi/linux/v4l2-subdev.h
diff --git a/include/linux/veth.h b/include/uapi/linux/veth.h
similarity index 100%
rename from include/linux/veth.h
rename to include/uapi/linux/veth.h
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
new file mode 100644
index 0000000000000000000000000000000000000000..4758d1bfcf4177c2179c73fa7979a808fd6faa81
--- /dev/null
+++ b/include/uapi/linux/vfio.h
@@ -0,0 +1,368 @@
+/*
+ * VFIO API definition
+ *
+ * Copyright (C) 2012 Red Hat, Inc.  All rights reserved.
+ *     Author: Alex Williamson <alex.williamson@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPIVFIO_H
+#define _UAPIVFIO_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define VFIO_API_VERSION	0
+
+
+/* Kernel & User level defines for VFIO IOCTLs. */
+
+/* Extensions */
+
+#define VFIO_TYPE1_IOMMU		1
+
+/*
+ * The IOCTL interface is designed for extensibility by embedding the
+ * structure length (argsz) and flags into structures passed between
+ * kernel and userspace.  We therefore use the _IO() macro for these
+ * defines to avoid implicitly embedding a size into the ioctl request.
+ * As structure fields are added, argsz will increase to match and flag
+ * bits will be defined to indicate additional fields with valid data.
+ * It's *always* the caller's responsibility to indicate the size of
+ * the structure passed by setting argsz appropriately.
+ */
+
+#define VFIO_TYPE	(';')
+#define VFIO_BASE	100
+
+/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
+
+/**
+ * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
+ *
+ * Report the version of the VFIO API.  This allows us to bump the entire
+ * API version should we later need to add or change features in incompatible
+ * ways.
+ * Return: VFIO_API_VERSION
+ * Availability: Always
+ */
+#define VFIO_GET_API_VERSION		_IO(VFIO_TYPE, VFIO_BASE + 0)
+
+/**
+ * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
+ *
+ * Check whether an extension is supported.
+ * Return: 0 if not supported, 1 (or some other positive integer) if supported.
+ * Availability: Always
+ */
+#define VFIO_CHECK_EXTENSION		_IO(VFIO_TYPE, VFIO_BASE + 1)
+
+/**
+ * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
+ *
+ * Set the iommu to the given type.  The type must be supported by an
+ * iommu driver as verified by calling CHECK_EXTENSION using the same
+ * type.  A group must be set to this file descriptor before this
+ * ioctl is available.  The IOMMU interfaces enabled by this call are
+ * specific to the value set.
+ * Return: 0 on success, -errno on failure
+ * Availability: When VFIO group attached
+ */
+#define VFIO_SET_IOMMU			_IO(VFIO_TYPE, VFIO_BASE + 2)
+
+/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
+
+/**
+ * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
+ *						struct vfio_group_status)
+ *
+ * Retrieve information about the group.  Fills in provided
+ * struct vfio_group_info.  Caller sets argsz.
+ * Return: 0 on succes, -errno on failure.
+ * Availability: Always
+ */
+struct vfio_group_status {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_GROUP_FLAGS_VIABLE		(1 << 0)
+#define VFIO_GROUP_FLAGS_CONTAINER_SET	(1 << 1)
+};
+#define VFIO_GROUP_GET_STATUS		_IO(VFIO_TYPE, VFIO_BASE + 3)
+
+/**
+ * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
+ *
+ * Set the container for the VFIO group to the open VFIO file
+ * descriptor provided.  Groups may only belong to a single
+ * container.  Containers may, at their discretion, support multiple
+ * groups.  Only when a container is set are all of the interfaces
+ * of the VFIO file descriptor and the VFIO group file descriptor
+ * available to the user.
+ * Return: 0 on success, -errno on failure.
+ * Availability: Always
+ */
+#define VFIO_GROUP_SET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 4)
+
+/**
+ * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
+ *
+ * Remove the group from the attached container.  This is the
+ * opposite of the SET_CONTAINER call and returns the group to
+ * an initial state.  All device file descriptors must be released
+ * prior to calling this interface.  When removing the last group
+ * from a container, the IOMMU will be disabled and all state lost,
+ * effectively also returning the VFIO file descriptor to an initial
+ * state.
+ * Return: 0 on success, -errno on failure.
+ * Availability: When attached to container
+ */
+#define VFIO_GROUP_UNSET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 5)
+
+/**
+ * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
+ *
+ * Return a new file descriptor for the device object described by
+ * the provided string.  The string should match a device listed in
+ * the devices subdirectory of the IOMMU group sysfs entry.  The
+ * group containing the device must already be added to this context.
+ * Return: new file descriptor on success, -errno on failure.
+ * Availability: When attached to container
+ */
+#define VFIO_GROUP_GET_DEVICE_FD	_IO(VFIO_TYPE, VFIO_BASE + 6)
+
+/* --------------- IOCTLs for DEVICE file descriptors --------------- */
+
+/**
+ * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
+ *						struct vfio_device_info)
+ *
+ * Retrieve information about the device.  Fills in provided
+ * struct vfio_device_info.  Caller sets argsz.
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_device_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DEVICE_FLAGS_RESET	(1 << 0)	/* Device supports reset */
+#define VFIO_DEVICE_FLAGS_PCI	(1 << 1)	/* vfio-pci device */
+	__u32	num_regions;	/* Max region index + 1 */
+	__u32	num_irqs;	/* Max IRQ index + 1 */
+};
+#define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
+
+/**
+ * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
+ *				       struct vfio_region_info)
+ *
+ * Retrieve information about a device region.  Caller provides
+ * struct vfio_region_info with index value set.  Caller sets argsz.
+ * Implementation of region mapping is bus driver specific.  This is
+ * intended to describe MMIO, I/O port, as well as bus specific
+ * regions (ex. PCI config space).  Zero sized regions may be used
+ * to describe unimplemented regions (ex. unimplemented PCI BARs).
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_region_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_REGION_INFO_FLAG_READ	(1 << 0) /* Region supports read */
+#define VFIO_REGION_INFO_FLAG_WRITE	(1 << 1) /* Region supports write */
+#define VFIO_REGION_INFO_FLAG_MMAP	(1 << 2) /* Region supports mmap */
+	__u32	index;		/* Region index */
+	__u32	resv;		/* Reserved for alignment */
+	__u64	size;		/* Region size (bytes) */
+	__u64	offset;		/* Region offset from start of device fd */
+};
+#define VFIO_DEVICE_GET_REGION_INFO	_IO(VFIO_TYPE, VFIO_BASE + 8)
+
+/**
+ * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
+ *				    struct vfio_irq_info)
+ *
+ * Retrieve information about a device IRQ.  Caller provides
+ * struct vfio_irq_info with index value set.  Caller sets argsz.
+ * Implementation of IRQ mapping is bus driver specific.  Indexes
+ * using multiple IRQs are primarily intended to support MSI-like
+ * interrupt blocks.  Zero count irq blocks may be used to describe
+ * unimplemented interrupt types.
+ *
+ * The EVENTFD flag indicates the interrupt index supports eventfd based
+ * signaling.
+ *
+ * The MASKABLE flags indicates the index supports MASK and UNMASK
+ * actions described below.
+ *
+ * AUTOMASKED indicates that after signaling, the interrupt line is
+ * automatically masked by VFIO and the user needs to unmask the line
+ * to receive new interrupts.  This is primarily intended to distinguish
+ * level triggered interrupts.
+ *
+ * The NORESIZE flag indicates that the interrupt lines within the index
+ * are setup as a set and new subindexes cannot be enabled without first
+ * disabling the entire index.  This is used for interrupts like PCI MSI
+ * and MSI-X where the driver may only use a subset of the available
+ * indexes, but VFIO needs to enable a specific number of vectors
+ * upfront.  In the case of MSI-X, where the user can enable MSI-X and
+ * then add and unmask vectors, it's up to userspace to make the decision
+ * whether to allocate the maximum supported number of vectors or tear
+ * down setup and incrementally increase the vectors as each is enabled.
+ */
+struct vfio_irq_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IRQ_INFO_EVENTFD		(1 << 0)
+#define VFIO_IRQ_INFO_MASKABLE		(1 << 1)
+#define VFIO_IRQ_INFO_AUTOMASKED	(1 << 2)
+#define VFIO_IRQ_INFO_NORESIZE		(1 << 3)
+	__u32	index;		/* IRQ index */
+	__u32	count;		/* Number of IRQs within this index */
+};
+#define VFIO_DEVICE_GET_IRQ_INFO	_IO(VFIO_TYPE, VFIO_BASE + 9)
+
+/**
+ * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
+ *
+ * Set signaling, masking, and unmasking of interrupts.  Caller provides
+ * struct vfio_irq_set with all fields set.  'start' and 'count' indicate
+ * the range of subindexes being specified.
+ *
+ * The DATA flags specify the type of data provided.  If DATA_NONE, the
+ * operation performs the specified action immediately on the specified
+ * interrupt(s).  For example, to unmask AUTOMASKED interrupt [0,0]:
+ * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
+ *
+ * DATA_BOOL allows sparse support for the same on arrays of interrupts.
+ * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
+ * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
+ * data = {1,0,1}
+ *
+ * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
+ * A value of -1 can be used to either de-assign interrupts if already
+ * assigned or skip un-assigned interrupts.  For example, to set an eventfd
+ * to be trigger for interrupts [0,0] and [0,2]:
+ * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
+ * data = {fd1, -1, fd2}
+ * If index [0,1] is previously set, two count = 1 ioctls calls would be
+ * required to set [0,0] and [0,2] without changing [0,1].
+ *
+ * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
+ * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
+ * from userspace (ie. simulate hardware triggering).
+ *
+ * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
+ * enables the interrupt index for the device.  Individual subindex interrupts
+ * can be disabled using the -1 value for DATA_EVENTFD or the index can be
+ * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
+ *
+ * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
+ * ACTION_TRIGGER specifies kernel->user signaling.
+ */
+struct vfio_irq_set {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IRQ_SET_DATA_NONE		(1 << 0) /* Data not present */
+#define VFIO_IRQ_SET_DATA_BOOL		(1 << 1) /* Data is bool (u8) */
+#define VFIO_IRQ_SET_DATA_EVENTFD	(1 << 2) /* Data is eventfd (s32) */
+#define VFIO_IRQ_SET_ACTION_MASK	(1 << 3) /* Mask interrupt */
+#define VFIO_IRQ_SET_ACTION_UNMASK	(1 << 4) /* Unmask interrupt */
+#define VFIO_IRQ_SET_ACTION_TRIGGER	(1 << 5) /* Trigger interrupt */
+	__u32	index;
+	__u32	start;
+	__u32	count;
+	__u8	data[];
+};
+#define VFIO_DEVICE_SET_IRQS		_IO(VFIO_TYPE, VFIO_BASE + 10)
+
+#define VFIO_IRQ_SET_DATA_TYPE_MASK	(VFIO_IRQ_SET_DATA_NONE | \
+					 VFIO_IRQ_SET_DATA_BOOL | \
+					 VFIO_IRQ_SET_DATA_EVENTFD)
+#define VFIO_IRQ_SET_ACTION_TYPE_MASK	(VFIO_IRQ_SET_ACTION_MASK | \
+					 VFIO_IRQ_SET_ACTION_UNMASK | \
+					 VFIO_IRQ_SET_ACTION_TRIGGER)
+/**
+ * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
+ *
+ * Reset a device.
+ */
+#define VFIO_DEVICE_RESET		_IO(VFIO_TYPE, VFIO_BASE + 11)
+
+/*
+ * The VFIO-PCI bus driver makes use of the following fixed region and
+ * IRQ index mapping.  Unimplemented regions return a size of zero.
+ * Unimplemented IRQ types return a count of zero.
+ */
+
+enum {
+	VFIO_PCI_BAR0_REGION_INDEX,
+	VFIO_PCI_BAR1_REGION_INDEX,
+	VFIO_PCI_BAR2_REGION_INDEX,
+	VFIO_PCI_BAR3_REGION_INDEX,
+	VFIO_PCI_BAR4_REGION_INDEX,
+	VFIO_PCI_BAR5_REGION_INDEX,
+	VFIO_PCI_ROM_REGION_INDEX,
+	VFIO_PCI_CONFIG_REGION_INDEX,
+	VFIO_PCI_NUM_REGIONS
+};
+
+enum {
+	VFIO_PCI_INTX_IRQ_INDEX,
+	VFIO_PCI_MSI_IRQ_INDEX,
+	VFIO_PCI_MSIX_IRQ_INDEX,
+	VFIO_PCI_NUM_IRQS
+};
+
+/* -------- API for Type1 VFIO IOMMU -------- */
+
+/**
+ * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
+ *
+ * Retrieve information about the IOMMU object. Fills in provided
+ * struct vfio_iommu_info. Caller sets argsz.
+ *
+ * XXX Should we do these by CHECK_EXTENSION too?
+ */
+struct vfio_iommu_type1_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IOMMU_INFO_PGSIZES (1 << 0)	/* supported page sizes info */
+	__u64	iova_pgsizes;		/* Bitmap of supported page sizes */
+};
+
+#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+/**
+ * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
+ *
+ * Map process virtual addresses to IO virtual addresses using the
+ * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ */
+struct vfio_iommu_type1_dma_map {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
+#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
+	__u64	vaddr;				/* Process virtual address */
+	__u64	iova;				/* IO virtual address */
+	__u64	size;				/* Size of mapping (bytes) */
+};
+
+#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
+
+/**
+ * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
+ *
+ * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
+ * Caller sets argsz.
+ */
+struct vfio_iommu_type1_dma_unmap {
+	__u32	argsz;
+	__u32	flags;
+	__u64	iova;				/* IO virtual address */
+	__u64	size;				/* Size of mapping (bytes) */
+};
+
+#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
+
+#endif /* _UAPIVFIO_H */
diff --git a/include/linux/vhost.h b/include/uapi/linux/vhost.h
similarity index 100%
rename from include/linux/vhost.h
rename to include/uapi/linux/vhost.h
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
new file mode 100644
index 0000000000000000000000000000000000000000..57bfa59cda74f3add633e7f6c0a7f6da9879b0b3
--- /dev/null
+++ b/include/uapi/linux/videodev2.h
@@ -0,0 +1,1998 @@
+/*
+ *  Video for Linux Two header file
+ *
+ *  Copyright (C) 1999-2012 the contributors
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  Alternatively you can redistribute this file under the terms of the
+ *  BSD license as stated below:
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *  3. The names of its contributors may not be used to endorse or promote
+ *     products derived from this software without specific prior written
+ *     permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *	Header file for v4l or V4L2 drivers and applications
+ * with public API.
+ * All kernel-specific stuff were moved to media/v4l2-dev.h, so
+ * no #if __KERNEL tests are allowed here
+ *
+ *	See http://linuxtv.org for more info
+ *
+ *	Author: Bill Dirks <bill@thedirks.org>
+ *		Justin Schoeman
+ *              Hans Verkuil <hverkuil@xs4all.nl>
+ *		et al.
+ */
+#ifndef _UAPI__LINUX_VIDEODEV2_H
+#define _UAPI__LINUX_VIDEODEV2_H
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/v4l2-common.h>
+#include <linux/v4l2-controls.h>
+
+/*
+ * Common stuff for both V4L1 and V4L2
+ * Moved from videodev.h
+ */
+#define VIDEO_MAX_FRAME               32
+#define VIDEO_MAX_PLANES               8
+
+#ifndef __KERNEL__
+
+/* These defines are V4L1 specific and should not be used with the V4L2 API!
+   They will be removed from this header in the future. */
+
+#define VID_TYPE_CAPTURE	1	/* Can capture */
+#define VID_TYPE_TUNER		2	/* Can tune */
+#define VID_TYPE_TELETEXT	4	/* Does teletext */
+#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
+#define VID_TYPE_CLIPPING	32	/* Can clip */
+#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
+#define VID_TYPE_SCALES		128	/* Scalable */
+#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
+#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+#endif
+
+/*
+ *	M I S C E L L A N E O U S
+ */
+
+/*  Four-character-code (FOURCC) */
+#define v4l2_fourcc(a, b, c, d)\
+	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
+
+/*
+ *	E N U M S
+ */
+enum v4l2_field {
+	V4L2_FIELD_ANY           = 0, /* driver can choose from none,
+					 top, bottom, interlaced
+					 depending on whatever it thinks
+					 is approximate ... */
+	V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
+	V4L2_FIELD_TOP           = 2, /* top field only */
+	V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
+	V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
+	V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
+					 buffer, top-bottom order */
+	V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
+	V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
+					 separate buffers */
+	V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
+					 first and the top field is
+					 transmitted first */
+	V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
+					 first and the bottom field is
+					 transmitted first */
+};
+#define V4L2_FIELD_HAS_TOP(field)	\
+	((field) == V4L2_FIELD_TOP 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTTOM(field)	\
+	((field) == V4L2_FIELD_BOTTOM 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTH(field)	\
+	((field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB ||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+
+enum v4l2_buf_type {
+	V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
+	V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
+	V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
+	V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
+	V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
+	V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
+#if 1
+	/* Experimental */
+	V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
+#endif
+	V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
+	/* Deprecated, do not use */
+	V4L2_BUF_TYPE_PRIVATE              = 0x80,
+};
+
+#define V4L2_TYPE_IS_MULTIPLANAR(type)			\
+	((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE	\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+
+#define V4L2_TYPE_IS_OUTPUT(type)				\
+	((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT			\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE		\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY		\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY	\
+	 || (type) == V4L2_BUF_TYPE_VBI_OUTPUT			\
+	 || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
+
+enum v4l2_tuner_type {
+	V4L2_TUNER_RADIO	     = 1,
+	V4L2_TUNER_ANALOG_TV	     = 2,
+	V4L2_TUNER_DIGITAL_TV	     = 3,
+};
+
+enum v4l2_memory {
+	V4L2_MEMORY_MMAP             = 1,
+	V4L2_MEMORY_USERPTR          = 2,
+	V4L2_MEMORY_OVERLAY          = 3,
+};
+
+/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
+enum v4l2_colorspace {
+	/* ITU-R 601 -- broadcast NTSC/PAL */
+	V4L2_COLORSPACE_SMPTE170M     = 1,
+
+	/* 1125-Line (US) HDTV */
+	V4L2_COLORSPACE_SMPTE240M     = 2,
+
+	/* HD and modern captures. */
+	V4L2_COLORSPACE_REC709        = 3,
+
+	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
+	V4L2_COLORSPACE_BT878         = 4,
+
+	/* These should be useful.  Assume 601 extents. */
+	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
+	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
+
+	/* I know there will be cameras that send this.  So, this is
+	 * unspecified chromaticities and full 0-255 on each of the
+	 * Y'CbCr components
+	 */
+	V4L2_COLORSPACE_JPEG          = 7,
+
+	/* For RGB colourspaces, this is probably a good start. */
+	V4L2_COLORSPACE_SRGB          = 8,
+};
+
+enum v4l2_priority {
+	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
+	V4L2_PRIORITY_BACKGROUND  = 1,
+	V4L2_PRIORITY_INTERACTIVE = 2,
+	V4L2_PRIORITY_RECORD      = 3,
+	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
+};
+
+struct v4l2_rect {
+	__s32   left;
+	__s32   top;
+	__s32   width;
+	__s32   height;
+};
+
+struct v4l2_fract {
+	__u32   numerator;
+	__u32   denominator;
+};
+
+/**
+  * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
+  *
+  * @driver:	   name of the driver module (e.g. "bttv")
+  * @card:	   name of the card (e.g. "Hauppauge WinTV")
+  * @bus_info:	   name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
+  * @version:	   KERNEL_VERSION
+  * @capabilities: capabilities of the physical device as a whole
+  * @device_caps:  capabilities accessed via this particular device (node)
+  * @reserved:	   reserved fields for future extensions
+  */
+struct v4l2_capability {
+	__u8	driver[16];
+	__u8	card[32];
+	__u8	bus_info[32];
+	__u32   version;
+	__u32	capabilities;
+	__u32	device_caps;
+	__u32	reserved[3];
+};
+
+/* Values for 'capabilities' field */
+#define V4L2_CAP_VIDEO_CAPTURE		0x00000001  /* Is a video capture device */
+#define V4L2_CAP_VIDEO_OUTPUT		0x00000002  /* Is a video output device */
+#define V4L2_CAP_VIDEO_OVERLAY		0x00000004  /* Can do video overlay */
+#define V4L2_CAP_VBI_CAPTURE		0x00000010  /* Is a raw VBI capture device */
+#define V4L2_CAP_VBI_OUTPUT		0x00000020  /* Is a raw VBI output device */
+#define V4L2_CAP_SLICED_VBI_CAPTURE	0x00000040  /* Is a sliced VBI capture device */
+#define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
+#define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
+#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
+#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
+#define V4L2_CAP_RDS_OUTPUT		0x00000800  /* Is an RDS encoder */
+
+/* Is a video capture device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_CAPTURE_MPLANE	0x00001000
+/* Is a video output device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_OUTPUT_MPLANE	0x00002000
+/* Is a video mem-to-mem device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_M2M_MPLANE	0x00004000
+/* Is a video mem-to-mem device */
+#define V4L2_CAP_VIDEO_M2M		0x00008000
+
+#define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
+#define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
+#define V4L2_CAP_RADIO			0x00040000  /* is a radio device */
+#define V4L2_CAP_MODULATOR		0x00080000  /* has a modulator */
+
+#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
+#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
+#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
+
+#define V4L2_CAP_DEVICE_CAPS            0x80000000  /* sets device capabilities field */
+
+/*
+ *	V I D E O   I M A G E   F O R M A T
+ */
+struct v4l2_pix_format {
+	__u32         		width;
+	__u32			height;
+	__u32			pixelformat;
+	__u32			field;		/* enum v4l2_field */
+	__u32            	bytesperline;	/* for padding, zero if unused */
+	__u32          		sizeimage;
+	__u32			colorspace;	/* enum v4l2_colorspace */
+	__u32			priv;		/* private data, depends on pixelformat */
+};
+
+/*      Pixel format         FOURCC                          depth  Description  */
+
+/* RGB formats */
+#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
+#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
+#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
+#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
+#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
+#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
+
+/* Grey formats */
+#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
+#define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
+#define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
+#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
+#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
+
+/* Grey bit-packed formats */
+#define V4L2_PIX_FMT_Y10BPACK    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
+
+/* Palette formats */
+#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
+
+/* Luminance+Chrominance formats */
+#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
+#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
+#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_VYUY    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
+#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
+#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
+#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
+#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
+#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
+#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
+#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
+#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_M420    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
+
+/* two planes -- one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
+#define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
+#define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
+#define V4L2_PIX_FMT_NV42    v4l2_fourcc('N', 'V', '4', '2') /* 24  Y/CrCb 4:4:4  */
+
+/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21M   v4l2_fourcc('N', 'M', '2', '1') /* 21  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
+#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 16x16 macroblocks */
+
+/* three non contiguous planes - Y, Cb, Cr */
+#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
+#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12  YVU420 planar */
+
+/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
+#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB8  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
+	/* 10bit raw bayer DPCM compressed to 8 bits */
+#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
+#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
+#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
+#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
+	/*
+	 * 10bit raw bayer, expanded to 16 bits
+	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
+	 */
+#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
+
+/* compressed formats */
+#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
+#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
+#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
+#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
+#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
+#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
+#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
+#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
+#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
+#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
+#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
+#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
+#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
+#define V4L2_PIX_FMT_VP8      v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
+
+/*  Vendor-specific formats   */
+#define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
+#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
+#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
+#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
+#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
+#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
+#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
+#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
+#define V4L2_PIX_FMT_TM6000   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
+#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
+#define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
+#define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
+#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
+#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
+
+/*
+ *	F O R M A T   E N U M E R A T I O N
+ */
+struct v4l2_fmtdesc {
+	__u32		    index;             /* Format number      */
+	__u32		    type;              /* enum v4l2_buf_type */
+	__u32               flags;
+	__u8		    description[32];   /* Description string */
+	__u32		    pixelformat;       /* Format fourcc      */
+	__u32		    reserved[4];
+};
+
+#define V4L2_FMT_FLAG_COMPRESSED 0x0001
+#define V4L2_FMT_FLAG_EMULATED   0x0002
+
+#if 1
+	/* Experimental Frame Size and frame rate enumeration */
+/*
+ *	F R A M E   S I Z E   E N U M E R A T I O N
+ */
+enum v4l2_frmsizetypes {
+	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
+	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
+	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
+};
+
+struct v4l2_frmsize_discrete {
+	__u32			width;		/* Frame width [pixel] */
+	__u32			height;		/* Frame height [pixel] */
+};
+
+struct v4l2_frmsize_stepwise {
+	__u32			min_width;	/* Minimum frame width [pixel] */
+	__u32			max_width;	/* Maximum frame width [pixel] */
+	__u32			step_width;	/* Frame width step size [pixel] */
+	__u32			min_height;	/* Minimum frame height [pixel] */
+	__u32			max_height;	/* Maximum frame height [pixel] */
+	__u32			step_height;	/* Frame height step size [pixel] */
+};
+
+struct v4l2_frmsizeenum {
+	__u32			index;		/* Frame size number */
+	__u32			pixel_format;	/* Pixel format */
+	__u32			type;		/* Frame size type the device supports. */
+
+	union {					/* Frame size */
+		struct v4l2_frmsize_discrete	discrete;
+		struct v4l2_frmsize_stepwise	stepwise;
+	};
+
+	__u32   reserved[2];			/* Reserved space for future use */
+};
+
+/*
+ *	F R A M E   R A T E   E N U M E R A T I O N
+ */
+enum v4l2_frmivaltypes {
+	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
+	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
+	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
+};
+
+struct v4l2_frmival_stepwise {
+	struct v4l2_fract	min;		/* Minimum frame interval [s] */
+	struct v4l2_fract	max;		/* Maximum frame interval [s] */
+	struct v4l2_fract	step;		/* Frame interval step size [s] */
+};
+
+struct v4l2_frmivalenum {
+	__u32			index;		/* Frame format index */
+	__u32			pixel_format;	/* Pixel format */
+	__u32			width;		/* Frame width */
+	__u32			height;		/* Frame height */
+	__u32			type;		/* Frame interval type the device supports. */
+
+	union {					/* Frame interval */
+		struct v4l2_fract		discrete;
+		struct v4l2_frmival_stepwise	stepwise;
+	};
+
+	__u32	reserved[2];			/* Reserved space for future use */
+};
+#endif
+
+/*
+ *	T I M E C O D E
+ */
+struct v4l2_timecode {
+	__u32	type;
+	__u32	flags;
+	__u8	frames;
+	__u8	seconds;
+	__u8	minutes;
+	__u8	hours;
+	__u8	userbits[4];
+};
+
+/*  Type  */
+#define V4L2_TC_TYPE_24FPS		1
+#define V4L2_TC_TYPE_25FPS		2
+#define V4L2_TC_TYPE_30FPS		3
+#define V4L2_TC_TYPE_50FPS		4
+#define V4L2_TC_TYPE_60FPS		5
+
+/*  Flags  */
+#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
+#define V4L2_TC_FLAG_COLORFRAME		0x0002
+#define V4L2_TC_USERBITS_field		0x000C
+#define V4L2_TC_USERBITS_USERDEFINED	0x0000
+#define V4L2_TC_USERBITS_8BITCHARS	0x0008
+/* The above is based on SMPTE timecodes */
+
+struct v4l2_jpegcompression {
+	int quality;
+
+	int  APPn;              /* Number of APP segment to be written,
+				 * must be 0..15 */
+	int  APP_len;           /* Length of data in JPEG APPn segment */
+	char APP_data[60];      /* Data in the JPEG APPn segment. */
+
+	int  COM_len;           /* Length of data in JPEG COM segment */
+	char COM_data[60];      /* Data in JPEG COM segment */
+
+	__u32 jpeg_markers;     /* Which markers should go into the JPEG
+				 * output. Unless you exactly know what
+				 * you do, leave them untouched.
+				 * Inluding less markers will make the
+				 * resulting code smaller, but there will
+				 * be fewer applications which can read it.
+				 * The presence of the APP and COM marker
+				 * is influenced by APP_len and COM_len
+				 * ONLY, not by this property! */
+
+#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
+#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
+#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
+#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
+#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
+					* allways use APP0 */
+};
+
+/*
+ *	M E M O R Y - M A P P I N G   B U F F E R S
+ */
+struct v4l2_requestbuffers {
+	__u32			count;
+	__u32			type;		/* enum v4l2_buf_type */
+	__u32			memory;		/* enum v4l2_memory */
+	__u32			reserved[2];
+};
+
+/**
+ * struct v4l2_plane - plane info for multi-planar buffers
+ * @bytesused:		number of bytes occupied by data in the plane (payload)
+ * @length:		size of this plane (NOT the payload) in bytes
+ * @mem_offset:		when memory in the associated struct v4l2_buffer is
+ *			V4L2_MEMORY_MMAP, equals the offset from the start of
+ *			the device memory for this plane (or is a "cookie" that
+ *			should be passed to mmap() called on the video node)
+ * @userptr:		when memory is V4L2_MEMORY_USERPTR, a userspace pointer
+ *			pointing to this plane
+ * @data_offset:	offset in the plane to the start of data; usually 0,
+ *			unless there is a header in front of the data
+ *
+ * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
+ * with two planes can have one plane for Y, and another for interleaved CbCr
+ * components. Each plane can reside in a separate memory buffer, or even in
+ * a completely separate memory node (e.g. in embedded devices).
+ */
+struct v4l2_plane {
+	__u32			bytesused;
+	__u32			length;
+	union {
+		__u32		mem_offset;
+		unsigned long	userptr;
+	} m;
+	__u32			data_offset;
+	__u32			reserved[11];
+};
+
+/**
+ * struct v4l2_buffer - video buffer info
+ * @index:	id number of the buffer
+ * @type:	enum v4l2_buf_type; buffer type (type == *_MPLANE for
+ *		multiplanar buffers);
+ * @bytesused:	number of bytes occupied by data in the buffer (payload);
+ *		unused (set to 0) for multiplanar buffers
+ * @flags:	buffer informational flags
+ * @field:	enum v4l2_field; field order of the image in the buffer
+ * @timestamp:	frame timestamp
+ * @timecode:	frame timecode
+ * @sequence:	sequence count of this frame
+ * @memory:	enum v4l2_memory; the method, in which the actual video data is
+ *		passed
+ * @offset:	for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
+ *		offset from the start of the device memory for this plane,
+ *		(or a "cookie" that should be passed to mmap() as offset)
+ * @userptr:	for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
+ *		a userspace pointer pointing to this buffer
+ * @planes:	for multiplanar buffers; userspace pointer to the array of plane
+ *		info structs for this buffer
+ * @length:	size in bytes of the buffer (NOT its payload) for single-plane
+ *		buffers (when type != *_MPLANE); number of elements in the
+ *		planes array for multi-plane buffers
+ * @input:	input number from which the video data has has been captured
+ *
+ * Contains data exchanged by application and driver using one of the Streaming
+ * I/O methods.
+ */
+struct v4l2_buffer {
+	__u32			index;
+	__u32			type;
+	__u32			bytesused;
+	__u32			flags;
+	__u32			field;
+	struct timeval		timestamp;
+	struct v4l2_timecode	timecode;
+	__u32			sequence;
+
+	/* memory location */
+	__u32			memory;
+	union {
+		__u32           offset;
+		unsigned long   userptr;
+		struct v4l2_plane *planes;
+	} m;
+	__u32			length;
+	__u32			reserved2;
+	__u32			reserved;
+};
+
+/*  Flags for 'flags' field */
+#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
+#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
+#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
+#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
+#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
+#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
+/* Buffer is ready, but the data contained within is corrupted. */
+#define V4L2_BUF_FLAG_ERROR	0x0040
+#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
+#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
+/* Cache handling flags */
+#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
+#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
+
+/*
+ *	O V E R L A Y   P R E V I E W
+ */
+struct v4l2_framebuffer {
+	__u32			capability;
+	__u32			flags;
+/* FIXME: in theory we should pass something like PCI device + memory
+ * region + offset instead of some physical address */
+	void                    *base;
+	struct v4l2_pix_format	fmt;
+};
+/*  Flags for the 'capability' field. Read only */
+#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
+#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
+#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
+#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
+#define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
+#define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
+#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
+/*  Flags for the 'flags' field. */
+#define V4L2_FBUF_FLAG_PRIMARY		0x0001
+#define V4L2_FBUF_FLAG_OVERLAY		0x0002
+#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
+#define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
+#define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
+#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040
+
+struct v4l2_clip {
+	struct v4l2_rect        c;
+	struct v4l2_clip	__user *next;
+};
+
+struct v4l2_window {
+	struct v4l2_rect        w;
+	__u32			field;	 /* enum v4l2_field */
+	__u32			chromakey;
+	struct v4l2_clip	__user *clips;
+	__u32			clipcount;
+	void			__user *bitmap;
+	__u8                    global_alpha;
+};
+
+/*
+ *	C A P T U R E   P A R A M E T E R S
+ */
+struct v4l2_captureparm {
+	__u32		   capability;	  /*  Supported modes */
+	__u32		   capturemode;	  /*  Current mode */
+	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
+	__u32		   extendedmode;  /*  Driver-specific extensions */
+	__u32              readbuffers;   /*  # of buffers for read */
+	__u32		   reserved[4];
+};
+
+/*  Flags for 'capability' and 'capturemode' fields */
+#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
+#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
+
+struct v4l2_outputparm {
+	__u32		   capability;	 /*  Supported modes */
+	__u32		   outputmode;	 /*  Current mode */
+	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
+	__u32		   extendedmode; /*  Driver-specific extensions */
+	__u32              writebuffers; /*  # of buffers for write */
+	__u32		   reserved[4];
+};
+
+/*
+ *	I N P U T   I M A G E   C R O P P I N G
+ */
+struct v4l2_cropcap {
+	__u32			type;	/* enum v4l2_buf_type */
+	struct v4l2_rect        bounds;
+	struct v4l2_rect        defrect;
+	struct v4l2_fract       pixelaspect;
+};
+
+struct v4l2_crop {
+	__u32			type;	/* enum v4l2_buf_type */
+	struct v4l2_rect        c;
+};
+
+/**
+ * struct v4l2_selection - selection info
+ * @type:	buffer type (do not use *_MPLANE types)
+ * @target:	Selection target, used to choose one of possible rectangles;
+ *		defined in v4l2-common.h; V4L2_SEL_TGT_* .
+ * @flags:	constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
+ * @r:		coordinates of selection window
+ * @reserved:	for future use, rounds structure size to 64 bytes, set to zero
+ *
+ * Hardware may use multiple helper windows to process a video stream.
+ * The structure is used to exchange this selection areas between
+ * an application and a driver.
+ */
+struct v4l2_selection {
+	__u32			type;
+	__u32			target;
+	__u32                   flags;
+	struct v4l2_rect        r;
+	__u32                   reserved[9];
+};
+
+
+/*
+ *      A N A L O G   V I D E O   S T A N D A R D
+ */
+
+typedef __u64 v4l2_std_id;
+
+/* one bit for each */
+#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
+#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
+#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
+#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
+#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
+#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
+#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
+#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
+
+#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
+#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
+#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
+#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
+
+#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)	/* BTSC */
+#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)	/* EIA-J */
+#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
+#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)	/* FM A2 */
+
+#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
+#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
+#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
+#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
+#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
+#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
+#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
+#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
+
+/* ATSC/HDTV */
+#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
+#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
+
+/* FIXME:
+   Although std_id is 64 bits, there is an issue on PPC32 architecture that
+   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
+   this value to 32 bits.
+   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
+   it should work fine. However, if needed to add more than two standards,
+   v4l2-common.c should be fixed.
+ */
+
+/*
+ * Some macros to merge video standards in order to make live easier for the
+ * drivers and V4L2 applications
+ */
+
+/*
+ * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
+ * Missing here.
+ */
+#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
+				 V4L2_STD_NTSC_M_JP     |\
+				 V4L2_STD_NTSC_M_KR)
+/* Secam macros */
+#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
+				 V4L2_STD_SECAM_K	|\
+				 V4L2_STD_SECAM_K1)
+/* All Secam Standards */
+#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
+				 V4L2_STD_SECAM_G	|\
+				 V4L2_STD_SECAM_H	|\
+				 V4L2_STD_SECAM_DK	|\
+				 V4L2_STD_SECAM_L       |\
+				 V4L2_STD_SECAM_LC)
+/* PAL macros */
+#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_PAL_G)
+#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
+				 V4L2_STD_PAL_D1	|\
+				 V4L2_STD_PAL_K)
+/*
+ * "Common" PAL - This macro is there to be compatible with the old
+ * V4L1 concept of "PAL": /BGDKHI.
+ * Several PAL standards are mising here: /M, /N and /Nc
+ */
+#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
+				 V4L2_STD_PAL_DK	|\
+				 V4L2_STD_PAL_H		|\
+				 V4L2_STD_PAL_I)
+/* Chroma "agnostic" standards */
+#define V4L2_STD_B		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_SECAM_B)
+#define V4L2_STD_G		(V4L2_STD_PAL_G		|\
+				 V4L2_STD_SECAM_G)
+#define V4L2_STD_H		(V4L2_STD_PAL_H		|\
+				 V4L2_STD_SECAM_H)
+#define V4L2_STD_L		(V4L2_STD_SECAM_L	|\
+				 V4L2_STD_SECAM_LC)
+#define V4L2_STD_GH		(V4L2_STD_G		|\
+				 V4L2_STD_H)
+#define V4L2_STD_DK		(V4L2_STD_PAL_DK	|\
+				 V4L2_STD_SECAM_DK)
+#define V4L2_STD_BG		(V4L2_STD_B		|\
+				 V4L2_STD_G)
+#define V4L2_STD_MN		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_NTSC)
+
+/* Standards where MTS/BTSC stereo could be found */
+#define V4L2_STD_MTS		(V4L2_STD_NTSC_M	|\
+				 V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc)
+
+/* Standards for Countries with 60Hz Line frequency */
+#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_60	|\
+				 V4L2_STD_NTSC		|\
+				 V4L2_STD_NTSC_443)
+/* Standards for Countries with 50Hz Line frequency */
+#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_SECAM)
+
+#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
+				 V4L2_STD_ATSC_16_VSB)
+/* Macros with none and all analog standards */
+#define V4L2_STD_UNKNOWN        0
+#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
+				 V4L2_STD_625_50)
+
+struct v4l2_standard {
+	__u32		     index;
+	v4l2_std_id          id;
+	__u8		     name[24];
+	struct v4l2_fract    frameperiod; /* Frames, not fields */
+	__u32		     framelines;
+	__u32		     reserved[4];
+};
+
+/* The DV Preset API is deprecated in favor of the DV Timings API.
+   New drivers shouldn't use this anymore! */
+
+/*
+ *	V I D E O	T I M I N G S	D V	P R E S E T
+ */
+struct v4l2_dv_preset {
+	__u32	preset;
+	__u32	reserved[4];
+};
+
+/*
+ *	D V	P R E S E T S	E N U M E R A T I O N
+ */
+struct v4l2_dv_enum_preset {
+	__u32	index;
+	__u32	preset;
+	__u8	name[32]; /* Name of the preset timing */
+	__u32	width;
+	__u32	height;
+	__u32	reserved[4];
+};
+
+/*
+ * 	D V	P R E S E T	V A L U E S
+ */
+#define		V4L2_DV_INVALID		0
+#define		V4L2_DV_480P59_94	1 /* BT.1362 */
+#define		V4L2_DV_576P50		2 /* BT.1362 */
+#define		V4L2_DV_720P24		3 /* SMPTE 296M */
+#define		V4L2_DV_720P25		4 /* SMPTE 296M */
+#define		V4L2_DV_720P30		5 /* SMPTE 296M */
+#define		V4L2_DV_720P50		6 /* SMPTE 296M */
+#define		V4L2_DV_720P59_94	7 /* SMPTE 274M */
+#define		V4L2_DV_720P60		8 /* SMPTE 274M/296M */
+#define		V4L2_DV_1080I29_97	9 /* BT.1120/ SMPTE 274M */
+#define		V4L2_DV_1080I30		10 /* BT.1120/ SMPTE 274M */
+#define		V4L2_DV_1080I25		11 /* BT.1120 */
+#define		V4L2_DV_1080I50		12 /* SMPTE 296M */
+#define		V4L2_DV_1080I60		13 /* SMPTE 296M */
+#define		V4L2_DV_1080P24		14 /* SMPTE 296M */
+#define		V4L2_DV_1080P25		15 /* SMPTE 296M */
+#define		V4L2_DV_1080P30		16 /* SMPTE 296M */
+#define		V4L2_DV_1080P50		17 /* BT.1120 */
+#define		V4L2_DV_1080P60		18 /* BT.1120 */
+
+/*
+ *	D V 	B T	T I M I N G S
+ */
+
+/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
+ * @width:	total width of the active video in pixels
+ * @height:	total height of the active video in lines
+ * @interlaced:	Interlaced or progressive
+ * @polarities:	Positive or negative polarities
+ * @pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @hfrontporch:Horizontal front porch in pixels
+ * @hsync:	Horizontal Sync length in pixels
+ * @hbackporch:	Horizontal back porch in pixels
+ * @vfrontporch:Vertical front porch in lines
+ * @vsync:	Vertical Sync length in lines
+ * @vbackporch:	Vertical back porch in lines
+ * @il_vfrontporch:Vertical front porch for the even field
+ *		(aka field 2) of interlaced field formats
+ * @il_vsync:	Vertical Sync length for the even field
+ *		(aka field 2) of interlaced field formats
+ * @il_vbackporch:Vertical back porch for the even field
+ *		(aka field 2) of interlaced field formats
+ * @standards:	Standards the timing belongs to
+ * @flags:	Flags
+ * @reserved:	Reserved fields, must be zeroed.
+ *
+ * A note regarding vertical interlaced timings: height refers to the total
+ * height of the active video frame (= two fields). The blanking timings refer
+ * to the blanking of each field. So the height of the total frame is
+ * calculated as follows:
+ *
+ * tot_height = height + vfrontporch + vsync + vbackporch +
+ *                       il_vfrontporch + il_vsync + il_vbackporch
+ *
+ * The active height of each field is height / 2.
+ */
+struct v4l2_bt_timings {
+	__u32	width;
+	__u32	height;
+	__u32	interlaced;
+	__u32	polarities;
+	__u64	pixelclock;
+	__u32	hfrontporch;
+	__u32	hsync;
+	__u32	hbackporch;
+	__u32	vfrontporch;
+	__u32	vsync;
+	__u32	vbackporch;
+	__u32	il_vfrontporch;
+	__u32	il_vsync;
+	__u32	il_vbackporch;
+	__u32	standards;
+	__u32	flags;
+	__u32	reserved[14];
+} __attribute__ ((packed));
+
+/* Interlaced or progressive format */
+#define	V4L2_DV_PROGRESSIVE	0
+#define	V4L2_DV_INTERLACED	1
+
+/* Polarities. If bit is not set, it is assumed to be negative polarity */
+#define V4L2_DV_VSYNC_POS_POL	0x00000001
+#define V4L2_DV_HSYNC_POS_POL	0x00000002
+
+/* Timings standards */
+#define V4L2_DV_BT_STD_CEA861	(1 << 0)  /* CEA-861 Digital TV Profile */
+#define V4L2_DV_BT_STD_DMT	(1 << 1)  /* VESA Discrete Monitor Timings */
+#define V4L2_DV_BT_STD_CVT	(1 << 2)  /* VESA Coordinated Video Timings */
+#define V4L2_DV_BT_STD_GTF	(1 << 3)  /* VESA Generalized Timings Formula */
+
+/* Flags */
+
+/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
+   GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
+   intervals are reduced, allowing a higher resolution over the same
+   bandwidth. This is a read-only flag. */
+#define V4L2_DV_FL_REDUCED_BLANKING		(1 << 0)
+/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
+   of six. These formats can be optionally played at 1 / 1.001 speed.
+   This is a read-only flag. */
+#define V4L2_DV_FL_CAN_REDUCE_FPS		(1 << 1)
+/* CEA-861 specific: only valid for video transmitters, the flag is cleared
+   by receivers.
+   If the framerate of the format is a multiple of six, then the pixelclock
+   used to set up the transmitter is divided by 1.001 to make it compatible
+   with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
+   29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
+   such frequencies, then the flag will also be cleared. */
+#define V4L2_DV_FL_REDUCED_FPS			(1 << 2)
+/* Specific to interlaced formats: if set, then field 1 is really one half-line
+   longer and field 2 is really one half-line shorter, so each field has
+   exactly the same number of half-lines. Whether half-lines can be detected
+   or used depends on the hardware. */
+#define V4L2_DV_FL_HALF_LINE			(1 << 0)
+
+
+/** struct v4l2_dv_timings - DV timings
+ * @type:	the type of the timings
+ * @bt:	BT656/1120 timings
+ */
+struct v4l2_dv_timings {
+	__u32 type;
+	union {
+		struct v4l2_bt_timings	bt;
+		__u32	reserved[32];
+	};
+} __attribute__ ((packed));
+
+/* Values for the type field */
+#define V4L2_DV_BT_656_1120	0	/* BT.656/1120 timing type */
+
+
+/** struct v4l2_enum_dv_timings - DV timings enumeration
+ * @index:	enumeration index
+ * @reserved:	must be zeroed
+ * @timings:	the timings for the given index
+ */
+struct v4l2_enum_dv_timings {
+	__u32 index;
+	__u32 reserved[3];
+	struct v4l2_dv_timings timings;
+};
+
+/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
+ * @min_width:		width in pixels
+ * @max_width:		width in pixels
+ * @min_height:		height in lines
+ * @max_height:		height in lines
+ * @min_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @max_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @standards:		Supported standards
+ * @capabilities:	Supported capabilities
+ * @reserved:		Must be zeroed
+ */
+struct v4l2_bt_timings_cap {
+	__u32	min_width;
+	__u32	max_width;
+	__u32	min_height;
+	__u32	max_height;
+	__u64	min_pixelclock;
+	__u64	max_pixelclock;
+	__u32	standards;
+	__u32	capabilities;
+	__u32	reserved[16];
+} __attribute__ ((packed));
+
+/* Supports interlaced formats */
+#define V4L2_DV_BT_CAP_INTERLACED	(1 << 0)
+/* Supports progressive formats */
+#define V4L2_DV_BT_CAP_PROGRESSIVE	(1 << 1)
+/* Supports CVT/GTF reduced blanking */
+#define V4L2_DV_BT_CAP_REDUCED_BLANKING	(1 << 2)
+/* Supports custom formats */
+#define V4L2_DV_BT_CAP_CUSTOM		(1 << 3)
+
+/** struct v4l2_dv_timings_cap - DV timings capabilities
+ * @type:	the type of the timings (same as in struct v4l2_dv_timings)
+ * @bt:		the BT656/1120 timings capabilities
+ */
+struct v4l2_dv_timings_cap {
+	__u32 type;
+	__u32 reserved[3];
+	union {
+		struct v4l2_bt_timings_cap bt;
+		__u32 raw_data[32];
+	};
+};
+
+
+/*
+ *	V I D E O   I N P U T S
+ */
+struct v4l2_input {
+	__u32	     index;		/*  Which input */
+	__u8	     name[32];		/*  Label */
+	__u32	     type;		/*  Type of input */
+	__u32	     audioset;		/*  Associated audios (bitfield) */
+	__u32        tuner;             /*  enum v4l2_tuner_type */
+	v4l2_std_id  std;
+	__u32	     status;
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
+
+/*  Values for the 'type' field */
+#define V4L2_INPUT_TYPE_TUNER		1
+#define V4L2_INPUT_TYPE_CAMERA		2
+
+/* field 'status' - general */
+#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
+#define V4L2_IN_ST_NO_SIGNAL   0x00000002
+#define V4L2_IN_ST_NO_COLOR    0x00000004
+
+/* field 'status' - sensor orientation */
+/* If sensor is mounted upside down set both bits */
+#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
+#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
+
+/* field 'status' - analog */
+#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
+#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
+
+/* field 'status' - digital */
+#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
+#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
+#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
+
+/* field 'status' - VCR and set-top box */
+#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
+#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
+#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
+
+/* capabilities flags */
+#define V4L2_IN_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_IN_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_IN_CAP_CUSTOM_TIMINGS	V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
+#define V4L2_IN_CAP_STD			0x00000004 /* Supports S_STD */
+
+/*
+ *	V I D E O   O U T P U T S
+ */
+struct v4l2_output {
+	__u32	     index;		/*  Which output */
+	__u8	     name[32];		/*  Label */
+	__u32	     type;		/*  Type of output */
+	__u32	     audioset;		/*  Associated audios (bitfield) */
+	__u32	     modulator;         /*  Associated modulator */
+	v4l2_std_id  std;
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
+/*  Values for the 'type' field */
+#define V4L2_OUTPUT_TYPE_MODULATOR		1
+#define V4L2_OUTPUT_TYPE_ANALOG			2
+#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
+
+/* capabilities flags */
+#define V4L2_OUT_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_OUT_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_OUT_CAP_CUSTOM_TIMINGS	V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
+#define V4L2_OUT_CAP_STD		0x00000004 /* Supports S_STD */
+
+/*
+ *	C O N T R O L S
+ */
+struct v4l2_control {
+	__u32		     id;
+	__s32		     value;
+};
+
+struct v4l2_ext_control {
+	__u32 id;
+	__u32 size;
+	__u32 reserved2[1];
+	union {
+		__s32 value;
+		__s64 value64;
+		char *string;
+	};
+} __attribute__ ((packed));
+
+struct v4l2_ext_controls {
+	__u32 ctrl_class;
+	__u32 count;
+	__u32 error_idx;
+	__u32 reserved[2];
+	struct v4l2_ext_control *controls;
+};
+
+#define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
+#define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
+#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
+
+enum v4l2_ctrl_type {
+	V4L2_CTRL_TYPE_INTEGER	     = 1,
+	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
+	V4L2_CTRL_TYPE_MENU	     = 3,
+	V4L2_CTRL_TYPE_BUTTON	     = 4,
+	V4L2_CTRL_TYPE_INTEGER64     = 5,
+	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
+	V4L2_CTRL_TYPE_STRING        = 7,
+	V4L2_CTRL_TYPE_BITMASK       = 8,
+	V4L2_CTRL_TYPE_INTEGER_MENU = 9,
+};
+
+/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
+struct v4l2_queryctrl {
+	__u32		     id;
+	__u32		     type;	/* enum v4l2_ctrl_type */
+	__u8		     name[32];	/* Whatever */
+	__s32		     minimum;	/* Note signedness */
+	__s32		     maximum;
+	__s32		     step;
+	__s32		     default_value;
+	__u32                flags;
+	__u32		     reserved[2];
+};
+
+/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
+struct v4l2_querymenu {
+	__u32		id;
+	__u32		index;
+	union {
+		__u8	name[32];	/* Whatever */
+		__s64	value;
+	};
+	__u32		reserved;
+} __attribute__ ((packed));
+
+/*  Control flags  */
+#define V4L2_CTRL_FLAG_DISABLED		0x0001
+#define V4L2_CTRL_FLAG_GRABBED		0x0002
+#define V4L2_CTRL_FLAG_READ_ONLY 	0x0004
+#define V4L2_CTRL_FLAG_UPDATE 		0x0008
+#define V4L2_CTRL_FLAG_INACTIVE 	0x0010
+#define V4L2_CTRL_FLAG_SLIDER 		0x0020
+#define V4L2_CTRL_FLAG_WRITE_ONLY 	0x0040
+#define V4L2_CTRL_FLAG_VOLATILE		0x0080
+
+/*  Query flag, to be ORed with the control ID */
+#define V4L2_CTRL_FLAG_NEXT_CTRL	0x80000000
+
+/*  User-class control IDs defined by V4L2 */
+#define V4L2_CID_MAX_CTRLS		1024
+/*  IDs reserved for driver specific controls */
+#define V4L2_CID_PRIVATE_BASE		0x08000000
+
+
+/*  DV-class control IDs defined by V4L2 */
+#define V4L2_CID_DV_CLASS_BASE			(V4L2_CTRL_CLASS_DV | 0x900)
+#define V4L2_CID_DV_CLASS			(V4L2_CTRL_CLASS_DV | 1)
+
+#define	V4L2_CID_DV_TX_HOTPLUG			(V4L2_CID_DV_CLASS_BASE + 1)
+#define	V4L2_CID_DV_TX_RXSENSE			(V4L2_CID_DV_CLASS_BASE + 2)
+#define	V4L2_CID_DV_TX_EDID_PRESENT		(V4L2_CID_DV_CLASS_BASE + 3)
+#define	V4L2_CID_DV_TX_MODE			(V4L2_CID_DV_CLASS_BASE + 4)
+enum v4l2_dv_tx_mode {
+	V4L2_DV_TX_MODE_DVI_D	= 0,
+	V4L2_DV_TX_MODE_HDMI	= 1,
+};
+#define V4L2_CID_DV_TX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 5)
+enum v4l2_dv_rgb_range {
+	V4L2_DV_RGB_RANGE_AUTO	  = 0,
+	V4L2_DV_RGB_RANGE_LIMITED = 1,
+	V4L2_DV_RGB_RANGE_FULL	  = 2,
+};
+
+#define	V4L2_CID_DV_RX_POWER_PRESENT		(V4L2_CID_DV_CLASS_BASE + 100)
+#define V4L2_CID_DV_RX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 101)
+
+/*
+ *	T U N I N G
+ */
+struct v4l2_tuner {
+	__u32                   index;
+	__u8			name[32];
+	__u32			type;	/* enum v4l2_tuner_type */
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			rxsubchans;
+	__u32			audmode;
+	__s32			signal;
+	__s32			afc;
+	__u32			reserved[4];
+};
+
+struct v4l2_modulator {
+	__u32			index;
+	__u8			name[32];
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			txsubchans;
+	__u32			reserved[4];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_TUNER_CAP_LOW		0x0001
+#define V4L2_TUNER_CAP_NORM		0x0002
+#define V4L2_TUNER_CAP_HWSEEK_BOUNDED	0x0004
+#define V4L2_TUNER_CAP_HWSEEK_WRAP	0x0008
+#define V4L2_TUNER_CAP_STEREO		0x0010
+#define V4L2_TUNER_CAP_LANG2		0x0020
+#define V4L2_TUNER_CAP_SAP		0x0020
+#define V4L2_TUNER_CAP_LANG1		0x0040
+#define V4L2_TUNER_CAP_RDS		0x0080
+#define V4L2_TUNER_CAP_RDS_BLOCK_IO	0x0100
+#define V4L2_TUNER_CAP_RDS_CONTROLS	0x0200
+#define V4L2_TUNER_CAP_FREQ_BANDS	0x0400
+#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM	0x0800
+
+/*  Flags for the 'rxsubchans' field */
+#define V4L2_TUNER_SUB_MONO		0x0001
+#define V4L2_TUNER_SUB_STEREO		0x0002
+#define V4L2_TUNER_SUB_LANG2		0x0004
+#define V4L2_TUNER_SUB_SAP		0x0004
+#define V4L2_TUNER_SUB_LANG1		0x0008
+#define V4L2_TUNER_SUB_RDS		0x0010
+
+/*  Values for the 'audmode' field */
+#define V4L2_TUNER_MODE_MONO		0x0000
+#define V4L2_TUNER_MODE_STEREO		0x0001
+#define V4L2_TUNER_MODE_LANG2		0x0002
+#define V4L2_TUNER_MODE_SAP		0x0002
+#define V4L2_TUNER_MODE_LANG1		0x0003
+#define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
+
+struct v4l2_frequency {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	frequency;
+	__u32	reserved[8];
+};
+
+#define V4L2_BAND_MODULATION_VSB	(1 << 1)
+#define V4L2_BAND_MODULATION_FM		(1 << 2)
+#define V4L2_BAND_MODULATION_AM		(1 << 3)
+
+struct v4l2_frequency_band {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	index;
+	__u32	capability;
+	__u32	rangelow;
+	__u32	rangehigh;
+	__u32	modulation;
+	__u32	reserved[9];
+};
+
+struct v4l2_hw_freq_seek {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	seek_upward;
+	__u32	wrap_around;
+	__u32	spacing;
+	__u32	rangelow;
+	__u32	rangehigh;
+	__u32	reserved[5];
+};
+
+/*
+ *	R D S
+ */
+
+struct v4l2_rds_data {
+	__u8 	lsb;
+	__u8 	msb;
+	__u8 	block;
+} __attribute__ ((packed));
+
+#define V4L2_RDS_BLOCK_MSK 	 0x7
+#define V4L2_RDS_BLOCK_A 	 0
+#define V4L2_RDS_BLOCK_B 	 1
+#define V4L2_RDS_BLOCK_C 	 2
+#define V4L2_RDS_BLOCK_D 	 3
+#define V4L2_RDS_BLOCK_C_ALT 	 4
+#define V4L2_RDS_BLOCK_INVALID 	 7
+
+#define V4L2_RDS_BLOCK_CORRECTED 0x40
+#define V4L2_RDS_BLOCK_ERROR 	 0x80
+
+/*
+ *	A U D I O
+ */
+struct v4l2_audio {
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_AUDCAP_STEREO		0x00001
+#define V4L2_AUDCAP_AVL			0x00002
+
+/*  Flags for the 'mode' field */
+#define V4L2_AUDMODE_AVL		0x00001
+
+struct v4l2_audioout {
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*
+ *	M P E G   S E R V I C E S
+ *
+ *	NOTE: EXPERIMENTAL API
+ */
+#if 1
+#define V4L2_ENC_IDX_FRAME_I    (0)
+#define V4L2_ENC_IDX_FRAME_P    (1)
+#define V4L2_ENC_IDX_FRAME_B    (2)
+#define V4L2_ENC_IDX_FRAME_MASK (0xf)
+
+struct v4l2_enc_idx_entry {
+	__u64 offset;
+	__u64 pts;
+	__u32 length;
+	__u32 flags;
+	__u32 reserved[2];
+};
+
+#define V4L2_ENC_IDX_ENTRIES (64)
+struct v4l2_enc_idx {
+	__u32 entries;
+	__u32 entries_cap;
+	__u32 reserved[4];
+	struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
+};
+
+
+#define V4L2_ENC_CMD_START      (0)
+#define V4L2_ENC_CMD_STOP       (1)
+#define V4L2_ENC_CMD_PAUSE      (2)
+#define V4L2_ENC_CMD_RESUME     (3)
+
+/* Flags for V4L2_ENC_CMD_STOP */
+#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)
+
+struct v4l2_encoder_cmd {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u32 data[8];
+		} raw;
+	};
+};
+
+/* Decoder commands */
+#define V4L2_DEC_CMD_START       (0)
+#define V4L2_DEC_CMD_STOP        (1)
+#define V4L2_DEC_CMD_PAUSE       (2)
+#define V4L2_DEC_CMD_RESUME      (3)
+
+/* Flags for V4L2_DEC_CMD_START */
+#define V4L2_DEC_CMD_START_MUTE_AUDIO	(1 << 0)
+
+/* Flags for V4L2_DEC_CMD_PAUSE */
+#define V4L2_DEC_CMD_PAUSE_TO_BLACK	(1 << 0)
+
+/* Flags for V4L2_DEC_CMD_STOP */
+#define V4L2_DEC_CMD_STOP_TO_BLACK	(1 << 0)
+#define V4L2_DEC_CMD_STOP_IMMEDIATELY	(1 << 1)
+
+/* Play format requirements (returned by the driver): */
+
+/* The decoder has no special format requirements */
+#define V4L2_DEC_START_FMT_NONE		(0)
+/* The decoder requires full GOPs */
+#define V4L2_DEC_START_FMT_GOP		(1)
+
+/* The structure must be zeroed before use by the application
+   This ensures it can be extended safely in the future. */
+struct v4l2_decoder_cmd {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u64 pts;
+		} stop;
+
+		struct {
+			/* 0 or 1000 specifies normal speed,
+			   1 specifies forward single stepping,
+			   -1 specifies backward single stepping,
+			   >1: playback at speed/1000 of the normal speed,
+			   <-1: reverse playback at (-speed/1000) of the normal speed. */
+			__s32 speed;
+			__u32 format;
+		} start;
+
+		struct {
+			__u32 data[16];
+		} raw;
+	};
+};
+#endif
+
+
+/*
+ *	D A T A   S E R V I C E S   ( V B I )
+ *
+ *	Data services API by Michael Schimek
+ */
+
+/* Raw VBI */
+struct v4l2_vbi_format {
+	__u32	sampling_rate;		/* in 1 Hz */
+	__u32	offset;
+	__u32	samples_per_line;
+	__u32	sample_format;		/* V4L2_PIX_FMT_* */
+	__s32	start[2];
+	__u32	count[2];
+	__u32	flags;			/* V4L2_VBI_* */
+	__u32	reserved[2];		/* must be zero */
+};
+
+/*  VBI flags  */
+#define V4L2_VBI_UNSYNC		(1 << 0)
+#define V4L2_VBI_INTERLACED	(1 << 1)
+
+/* Sliced VBI
+ *
+ *    This implements is a proposal V4L2 API to allow SLICED VBI
+ * required for some hardware encoders. It should change without
+ * notice in the definitive implementation.
+ */
+
+struct v4l2_sliced_vbi_format {
+	__u16   service_set;
+	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+				 (equals frame lines 313-336 for 625 line video
+				  standards, 263-286 for 525 line standards) */
+	__u16   service_lines[2][24];
+	__u32   io_size;
+	__u32   reserved[2];            /* must be zero */
+};
+
+/* Teletext World System Teletext
+   (WST), defined on ITU-R BT.653-2 */
+#define V4L2_SLICED_TELETEXT_B          (0x0001)
+/* Video Program System, defined on ETS 300 231*/
+#define V4L2_SLICED_VPS                 (0x0400)
+/* Closed Caption, defined on EIA-608 */
+#define V4L2_SLICED_CAPTION_525         (0x1000)
+/* Wide Screen System, defined on ITU-R BT1119.1 */
+#define V4L2_SLICED_WSS_625             (0x4000)
+
+#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
+#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
+
+struct v4l2_sliced_vbi_cap {
+	__u16   service_set;
+	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+				 (equals frame lines 313-336 for 625 line video
+				  standards, 263-286 for 525 line standards) */
+	__u16   service_lines[2][24];
+	__u32	type;		/* enum v4l2_buf_type */
+	__u32   reserved[3];    /* must be 0 */
+};
+
+struct v4l2_sliced_vbi_data {
+	__u32   id;
+	__u32   field;          /* 0: first field, 1: second field */
+	__u32   line;           /* 1-23 */
+	__u32   reserved;       /* must be 0 */
+	__u8    data[48];
+};
+
+/*
+ * Sliced VBI data inserted into MPEG Streams
+ */
+
+/*
+ * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
+ *
+ * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
+ * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
+ * data
+ *
+ * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
+ * definitions are not included here.  See the MPEG-2 specifications for details
+ * on these headers.
+ */
+
+/* Line type IDs */
+#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
+#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
+#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
+#define V4L2_MPEG_VBI_IVTV_VPS            (7)
+
+struct v4l2_mpeg_vbi_itv0_line {
+	__u8 id;	/* One of V4L2_MPEG_VBI_IVTV_* above */
+	__u8 data[42];	/* Sliced VBI data for the line */
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_itv0 {
+	__le32 linemask[2]; /* Bitmasks of VBI service lines present */
+	struct v4l2_mpeg_vbi_itv0_line line[35];
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_ITV0 {
+	struct v4l2_mpeg_vbi_itv0_line line[36];
+} __attribute__ ((packed));
+
+#define V4L2_MPEG_VBI_IVTV_MAGIC0	"itv0"
+#define V4L2_MPEG_VBI_IVTV_MAGIC1	"ITV0"
+
+struct v4l2_mpeg_vbi_fmt_ivtv {
+	__u8 magic[4];
+	union {
+		struct v4l2_mpeg_vbi_itv0 itv0;
+		struct v4l2_mpeg_vbi_ITV0 ITV0;
+	};
+} __attribute__ ((packed));
+
+/*
+ *	A G G R E G A T E   S T R U C T U R E S
+ */
+
+/**
+ * struct v4l2_plane_pix_format - additional, per-plane format definition
+ * @sizeimage:		maximum size in bytes required for data, for which
+ *			this plane will be used
+ * @bytesperline:	distance in bytes between the leftmost pixels in two
+ *			adjacent lines
+ */
+struct v4l2_plane_pix_format {
+	__u32		sizeimage;
+	__u16		bytesperline;
+	__u16		reserved[7];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_pix_format_mplane - multiplanar format definition
+ * @width:		image width in pixels
+ * @height:		image height in pixels
+ * @pixelformat:	little endian four character code (fourcc)
+ * @field:		enum v4l2_field; field order (for interlaced video)
+ * @colorspace:		enum v4l2_colorspace; supplemental to pixelformat
+ * @plane_fmt:		per-plane information
+ * @num_planes:		number of planes for this format
+ */
+struct v4l2_pix_format_mplane {
+	__u32				width;
+	__u32				height;
+	__u32				pixelformat;
+	__u32				field;
+	__u32				colorspace;
+
+	struct v4l2_plane_pix_format	plane_fmt[VIDEO_MAX_PLANES];
+	__u8				num_planes;
+	__u8				reserved[11];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_format - stream data format
+ * @type:	enum v4l2_buf_type; type of the data stream
+ * @pix:	definition of an image format
+ * @pix_mp:	definition of a multiplanar image format
+ * @win:	definition of an overlaid image
+ * @vbi:	raw VBI capture or output parameters
+ * @sliced:	sliced VBI capture or output parameters
+ * @raw_data:	placeholder for future extensions and custom formats
+ */
+struct v4l2_format {
+	__u32	 type;
+	union {
+		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
+		struct v4l2_pix_format_mplane	pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
+		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
+		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
+		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
+		__u8	raw_data[200];                   /* user-defined */
+	} fmt;
+};
+
+/*	Stream type-dependent parameters
+ */
+struct v4l2_streamparm {
+	__u32	 type;			/* enum v4l2_buf_type */
+	union {
+		struct v4l2_captureparm	capture;
+		struct v4l2_outputparm	output;
+		__u8	raw_data[200];  /* user-defined */
+	} parm;
+};
+
+/*
+ *	E V E N T S
+ */
+
+#define V4L2_EVENT_ALL				0
+#define V4L2_EVENT_VSYNC			1
+#define V4L2_EVENT_EOS				2
+#define V4L2_EVENT_CTRL				3
+#define V4L2_EVENT_FRAME_SYNC			4
+#define V4L2_EVENT_PRIVATE_START		0x08000000
+
+/* Payload for V4L2_EVENT_VSYNC */
+struct v4l2_event_vsync {
+	/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
+	__u8 field;
+} __attribute__ ((packed));
+
+/* Payload for V4L2_EVENT_CTRL */
+#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
+#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
+
+struct v4l2_event_ctrl {
+	__u32 changes;
+	__u32 type;
+	union {
+		__s32 value;
+		__s64 value64;
+	};
+	__u32 flags;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 step;
+	__s32 default_value;
+};
+
+struct v4l2_event_frame_sync {
+	__u32 frame_sequence;
+};
+
+struct v4l2_event {
+	__u32				type;
+	union {
+		struct v4l2_event_vsync		vsync;
+		struct v4l2_event_ctrl		ctrl;
+		struct v4l2_event_frame_sync	frame_sync;
+		__u8				data[64];
+	} u;
+	__u32				pending;
+	__u32				sequence;
+	struct timespec			timestamp;
+	__u32				id;
+	__u32				reserved[8];
+};
+
+#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
+#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
+
+struct v4l2_event_subscription {
+	__u32				type;
+	__u32				id;
+	__u32				flags;
+	__u32				reserved[5];
+};
+
+/*
+ *	A D V A N C E D   D E B U G G I N G
+ *
+ *	NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
+ *	FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
+ */
+
+/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
+
+#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
+#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
+#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
+#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
+
+struct v4l2_dbg_match {
+	__u32 type; /* Match type */
+	union {     /* Match this chip, meaning determined by type */
+		__u32 addr;
+		char name[32];
+	};
+} __attribute__ ((packed));
+
+struct v4l2_dbg_register {
+	struct v4l2_dbg_match match;
+	__u32 size;	/* register size in bytes */
+	__u64 reg;
+	__u64 val;
+} __attribute__ ((packed));
+
+/* VIDIOC_DBG_G_CHIP_IDENT */
+struct v4l2_dbg_chip_ident {
+	struct v4l2_dbg_match match;
+	__u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
+	__u32 revision;    /* chip revision, chip specific */
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
+ * @index:	on return, index of the first created buffer
+ * @count:	entry: number of requested buffers,
+ *		return: number of created buffers
+ * @memory:	enum v4l2_memory; buffer memory type
+ * @format:	frame format, for which buffers are requested
+ * @reserved:	future extensions
+ */
+struct v4l2_create_buffers {
+	__u32			index;
+	__u32			count;
+	__u32			memory;
+	struct v4l2_format	format;
+	__u32			reserved[8];
+};
+
+/*
+ *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
+ *
+ */
+#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
+#define VIDIOC_RESERVED		  _IO('V',  1)
+#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
+#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
+#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
+#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON		 _IOW('V', 18, int)
+#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
+#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
+#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
+#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
+#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
+#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY	 _IOR('V', 67, __u32) /* enum v4l2_priority */
+#define VIDIOC_S_PRIORITY	 _IOW('V', 68, __u32) /* enum v4l2_priority */
+#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
+#define VIDIOC_LOG_STATUS         _IO('V', 70)
+#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
+#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
+#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
+#if 1
+#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
+#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
+#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
+#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
+#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
+#endif
+
+#if 1
+/* Experimental, meant for debugging, testing and internal use.
+   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
+   You must be root to use these ioctls. Never use these in applications! */
+#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_dbg_register)
+#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_dbg_register)
+
+/* Experimental, meant for debugging, testing and internal use.
+   Never use this ioctl in applications! */
+#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
+#endif
+
+#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
+
+/* These four DV Preset ioctls are deprecated in favor of the DV Timings
+   ioctls. */
+#define	VIDIOC_ENUM_DV_PRESETS	_IOWR('V', 83, struct v4l2_dv_enum_preset)
+#define	VIDIOC_S_DV_PRESET	_IOWR('V', 84, struct v4l2_dv_preset)
+#define	VIDIOC_G_DV_PRESET	_IOWR('V', 85, struct v4l2_dv_preset)
+#define	VIDIOC_QUERY_DV_PRESET	_IOR('V',  86, struct v4l2_dv_preset)
+#define	VIDIOC_S_DV_TIMINGS	_IOWR('V', 87, struct v4l2_dv_timings)
+#define	VIDIOC_G_DV_TIMINGS	_IOWR('V', 88, struct v4l2_dv_timings)
+#define	VIDIOC_DQEVENT		 _IOR('V', 89, struct v4l2_event)
+#define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
+#define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
+
+/* Experimental, the below two ioctls may change over the next couple of kernel
+   versions */
+#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
+#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
+
+/* Experimental selection API */
+#define VIDIOC_G_SELECTION	_IOWR('V', 94, struct v4l2_selection)
+#define VIDIOC_S_SELECTION	_IOWR('V', 95, struct v4l2_selection)
+
+/* Experimental, these two ioctls may change over the next couple of kernel
+   versions. */
+#define VIDIOC_DECODER_CMD	_IOWR('V', 96, struct v4l2_decoder_cmd)
+#define VIDIOC_TRY_DECODER_CMD	_IOWR('V', 97, struct v4l2_decoder_cmd)
+
+/* Experimental, these three ioctls may change over the next couple of kernel
+   versions. */
+#define VIDIOC_ENUM_DV_TIMINGS  _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS  _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP   _IOWR('V', 100, struct v4l2_dv_timings_cap)
+
+/* Experimental, this ioctl may change over the next couple of kernel
+   versions. */
+#define VIDIOC_ENUM_FREQ_BANDS	_IOWR('V', 101, struct v4l2_frequency_band)
+
+/* Reminder: when adding new ioctls please add support for them to
+   drivers/media/video/v4l2-compat-ioctl32.c as well! */
+
+#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
+
+#endif /* _UAPI__LINUX_VIDEODEV2_H */
diff --git a/include/linux/virtio_9p.h b/include/uapi/linux/virtio_9p.h
similarity index 100%
rename from include/linux/virtio_9p.h
rename to include/uapi/linux/virtio_9p.h
diff --git a/include/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
similarity index 100%
rename from include/linux/virtio_balloon.h
rename to include/uapi/linux/virtio_balloon.h
diff --git a/include/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h
similarity index 100%
rename from include/linux/virtio_blk.h
rename to include/uapi/linux/virtio_blk.h
diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
new file mode 100644
index 0000000000000000000000000000000000000000..b7cda390fd00527eac3a2bdfaf93e56581bea344
--- /dev/null
+++ b/include/uapi/linux/virtio_config.h
@@ -0,0 +1,54 @@
+#ifndef _UAPI_LINUX_VIRTIO_CONFIG_H
+#define _UAPI_LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+/* Virtio devices use a standardized configuration space to define their
+ * features and pass configuration information, but each implementation can
+ * store and access that space differently. */
+#include <linux/types.h>
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER		2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK	4
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED		0x80
+
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START	28
+#define VIRTIO_TRANSPORT_F_END		32
+
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY	24
+
+#endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h
new file mode 100644
index 0000000000000000000000000000000000000000..ee13ab6c361409b31216da2e54790f804401fe51
--- /dev/null
+++ b/include/uapi/linux/virtio_console.h
@@ -0,0 +1,74 @@
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers:
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
+ * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
+ */
+#ifndef _UAPI_LINUX_VIRTIO_CONSOLE_H
+#define _UAPI_LINUX_VIRTIO_CONSOLE_H
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* Feature bits */
+#define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
+
+#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
+
+struct virtio_console_config {
+	/* colums of the screens */
+	__u16 cols;
+	/* rows of the screens */
+	__u16 rows;
+	/* max. number of ports this device can hold */
+	__u32 max_nr_ports;
+} __attribute__((packed));
+
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+	__u32 id;		/* Port number */
+	__u16 event;		/* The kind of control event (see below) */
+	__u16 value;		/* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_DEVICE_READY	0
+#define VIRTIO_CONSOLE_PORT_ADD		1
+#define VIRTIO_CONSOLE_PORT_REMOVE	2
+#define VIRTIO_CONSOLE_PORT_READY	3
+#define VIRTIO_CONSOLE_CONSOLE_PORT	4
+#define VIRTIO_CONSOLE_RESIZE		5
+#define VIRTIO_CONSOLE_PORT_OPEN	6
+#define VIRTIO_CONSOLE_PORT_NAME	7
+
+
+#endif /* _UAPI_LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
similarity index 100%
rename from include/linux/virtio_ids.h
rename to include/uapi/linux/virtio_ids.h
diff --git a/include/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
similarity index 100%
rename from include/linux/virtio_net.h
rename to include/uapi/linux/virtio_net.h
diff --git a/include/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h
similarity index 100%
rename from include/linux/virtio_pci.h
rename to include/uapi/linux/virtio_pci.h
diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h
new file mode 100644
index 0000000000000000000000000000000000000000..a99f9b7caa677124e88e3080ceecce82ff08438f
--- /dev/null
+++ b/include/uapi/linux/virtio_ring.h
@@ -0,0 +1,163 @@
+#ifndef _UAPI_LINUX_VIRTIO_RING_H
+#define _UAPI_LINUX_VIRTIO_RING_H
+/* An interface for efficient virtio implementation, currently for use by KVM
+ * and lguest, but hopefully others soon.  Do NOT change this since it will
+ * break existing servers and clients.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright Rusty Russell IBM Corporation 2007. */
+#include <linux/types.h>
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT	1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE	2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT	4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
+ * will still kick if it's out of buffers. */
+#define VRING_USED_F_NO_NOTIFY	1
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer.  It's unreliable, so it's simply an
+ * optimization.  */
+#define VRING_AVAIL_F_NO_INTERRUPT	1
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC	28
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field. */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field. */
+#define VIRTIO_RING_F_EVENT_IDX		29
+
+/* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
+struct vring_desc {
+	/* Address (guest-physical). */
+	__u64 addr;
+	/* Length. */
+	__u32 len;
+	/* The flags as indicated above. */
+	__u16 flags;
+	/* We chain unused descriptors via this, too */
+	__u16 next;
+};
+
+struct vring_avail {
+	__u16 flags;
+	__u16 idx;
+	__u16 ring[];
+};
+
+/* u32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+	/* Index of start of used descriptor chain. */
+	__u32 id;
+	/* Total length of the descriptor chain which was used (written to) */
+	__u32 len;
+};
+
+struct vring_used {
+	__u16 flags;
+	__u16 idx;
+	struct vring_used_elem ring[];
+};
+
+struct vring {
+	unsigned int num;
+
+	struct vring_desc *desc;
+
+	struct vring_avail *avail;
+
+	struct vring_used *used;
+};
+
+/* The standard layout for the ring is a continuous chunk of memory which looks
+ * like this.  We assume num is a power of 2.
+ *
+ * struct vring
+ * {
+ *	// The actual descriptors (16 bytes each)
+ *	struct vring_desc desc[num];
+ *
+ *	// A ring of available descriptor heads with free-running index.
+ *	__u16 avail_flags;
+ *	__u16 avail_idx;
+ *	__u16 available[num];
+ *	__u16 used_event_idx;
+ *
+ *	// Padding to the next align boundary.
+ *	char pad[];
+ *
+ *	// A ring of used descriptor heads with free-running index.
+ *	__u16 used_flags;
+ *	__u16 used_idx;
+ *	struct vring_used_elem used[num];
+ *	__u16 avail_event_idx;
+ * };
+ */
+/* We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility. */
+#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
+
+static inline void vring_init(struct vring *vr, unsigned int num, void *p,
+			      unsigned long align)
+{
+	vr->num = num;
+	vr->desc = p;
+	vr->avail = p + num*sizeof(struct vring_desc);
+	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
+		+ align-1) & ~(align - 1));
+}
+
+static inline unsigned vring_size(unsigned int num, unsigned long align)
+{
+	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+		 + align - 1) & ~(align - 1))
+		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+}
+
+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
+/* Assuming a given event_idx value from the other size, if
+ * we have just incremented index from old to new_idx,
+ * should we trigger an event? */
+static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
+{
+	/* Note: Xen has similar logic for notification hold-off
+	 * in include/xen/interface/io/ring.h with req_event and req_prod
+	 * corresponding to event_idx + 1 and new_idx respectively.
+	 * Note also that req_event and req_prod in Xen start at 1,
+	 * event indexes in virtio start at 0. */
+	return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
+}
+
+#endif /* _UAPI_LINUX_VIRTIO_RING_H */
diff --git a/include/linux/virtio_rng.h b/include/uapi/linux/virtio_rng.h
similarity index 100%
rename from include/linux/virtio_rng.h
rename to include/uapi/linux/virtio_rng.h
diff --git a/include/uapi/linux/vt.h b/include/uapi/linux/vt.h
new file mode 100644
index 0000000000000000000000000000000000000000..4b59a26799a366170db79572308ab5fd124efe5b
--- /dev/null
+++ b/include/uapi/linux/vt.h
@@ -0,0 +1,90 @@
+#ifndef _UAPI_LINUX_VT_H
+#define _UAPI_LINUX_VT_H
+
+
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1       /* must be at least 1 */
+#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
+		/* Note: the ioctl VT_GETSTATE does not work for
+		   consoles 16 and higher (since it returns a short) */
+
+/* 0x56 is 'V', to avoid collision with termios and kd */
+
+#define VT_OPENQRY	0x5600	/* find available vt */
+
+struct vt_mode {
+	char mode;		/* vt mode */
+	char waitv;		/* if set, hang on writes if not active */
+	short relsig;		/* signal to raise on release req */
+	short acqsig;		/* signal to raise on acquisition */
+	short frsig;		/* unused (set to 0) */
+};
+#define VT_GETMODE	0x5601	/* get mode of active vt */
+#define VT_SETMODE	0x5602	/* set mode of active vt */
+#define		VT_AUTO		0x00	/* auto vt switching */
+#define		VT_PROCESS	0x01	/* process controls switching */
+#define		VT_ACKACQ	0x02	/* acknowledge switch */
+
+struct vt_stat {
+	unsigned short v_active;	/* active vt */
+	unsigned short v_signal;	/* signal to send */
+	unsigned short v_state;		/* vt bitmask */
+};
+#define VT_GETSTATE	0x5603	/* get global vt state info */
+#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
+
+#define VT_RELDISP	0x5605	/* release display */
+
+#define VT_ACTIVATE	0x5606	/* make vt active */
+#define VT_WAITACTIVE	0x5607	/* wait for vt active */
+#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
+
+struct vt_sizes {
+	unsigned short v_rows;		/* number of rows */
+	unsigned short v_cols;		/* number of columns */
+	unsigned short v_scrollsize;	/* number of lines of scrollback */
+};
+#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
+
+struct vt_consize {
+	unsigned short v_rows;	/* number of rows */
+	unsigned short v_cols;	/* number of columns */
+	unsigned short v_vlin;	/* number of pixel rows on screen */
+	unsigned short v_clin;	/* number of pixel rows per character */
+	unsigned short v_vcol;	/* number of pixel columns on screen */
+	unsigned short v_ccol;	/* number of pixel columns per character */
+};
+#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
+#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
+#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
+#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
+
+struct vt_event {
+	unsigned int event;
+#define VT_EVENT_SWITCH		0x0001	/* Console switch */
+#define VT_EVENT_BLANK		0x0002	/* Screen blank */
+#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
+#define VT_EVENT_RESIZE		0x0008	/* Resize display */
+#define VT_MAX_EVENT		0x000F
+	unsigned int oldev;		/* Old console */
+	unsigned int newev;		/* New console (if changing) */
+	unsigned int pad[4];		/* Padding for expansion */
+};
+
+#define VT_WAITEVENT	0x560E	/* Wait for an event */
+
+struct vt_setactivate {
+	unsigned int console;
+	struct vt_mode mode;
+};
+
+#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
+
+
+#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
+
+#endif /* _UAPI_LINUX_VT_H */
diff --git a/include/uapi/linux/wait.h b/include/uapi/linux/wait.h
new file mode 100644
index 0000000000000000000000000000000000000000..9393eead23e2eff9cd6d8c269ad181c998de1e05
--- /dev/null
+++ b/include/uapi/linux/wait.h
@@ -0,0 +1,21 @@
+#ifndef _UAPI_LINUX_WAIT_H
+#define _UAPI_LINUX_WAIT_H
+
+#define WNOHANG		0x00000001
+#define WUNTRACED	0x00000002
+#define WSTOPPED	WUNTRACED
+#define WEXITED		0x00000004
+#define WCONTINUED	0x00000008
+#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
+
+#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
+#define __WALL		0x40000000	/* Wait on all children, regardless of type */
+#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
+
+/* First argument to waitid: */
+#define P_ALL		0
+#define P_PID		1
+#define P_PGID		2
+
+
+#endif /* _UAPI_LINUX_WAIT_H */
diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h
new file mode 100644
index 0000000000000000000000000000000000000000..7617df2833d537514939a44823511b671b37634c
--- /dev/null
+++ b/include/uapi/linux/wanrouter.h
@@ -0,0 +1,452 @@
+/*****************************************************************************
+* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
+*		This module provides API and common services for WAN Link
+*		Drivers and is completely hardware-independent.
+*
+* Author: 	Nenad Corbic <ncorbic@sangoma.com>
+*		Gideon Hack 	
+* Additions:	Arnaldo Melo
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
+* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
+* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
+* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
+* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
+* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
+*				WAN_DISCONNECTING state added
+* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
+* Jun 12, 1998	David Fong	Added Cisco HDLC support.
+* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
+*				'wanif_conf_t'
+* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
+*				Added 'authenticator' to 'wan_ppp_conf_t'
+* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
+* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
+*				Added 'enable_IPX' and 'network_number' to 
+*				'wan_device_t'.  Also added defines for
+*				UDP PACKET TYPE, Interrupt test, critical values
+*				for RACE conditions.
+* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
+*				'wan_fr_conf_t' to configure a list of dlci(s)
+*				for a NODE 
+* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
+* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
+* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
+* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
+* Jan 16, 1997	Gene Kozin	router_devlist made public
+* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
+*****************************************************************************/
+
+#ifndef _UAPI_ROUTER_H
+#define _UAPI_ROUTER_H
+
+#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
+#define	ROUTER_VERSION	1		/* version number */
+#define	ROUTER_RELEASE	1		/* release (minor version) number */
+#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
+#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
+
+/* IOCTL codes for /proc/router/<device> entries (up to 255) */
+enum router_ioctls
+{
+	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
+	ROUTER_DOWN,				/* shut down device */
+	ROUTER_STAT,				/* get device status */
+	ROUTER_IFNEW,				/* add interface */
+	ROUTER_IFDEL,				/* delete interface */
+	ROUTER_IFSTAT,				/* get interface status */
+	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
+	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
+};
+
+/* identifiers for displaying proc file data for dual port adapters */
+#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
+#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
+
+/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
+#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
+#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
+#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
+#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
+#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
+#define	NLPID_Q933	0x08	/* CCITT Q.933 */
+
+/* Miscellaneous */
+#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
+#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
+#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
+#define USED_BY_FIELD	8	/* max length of the used by field */
+
+/* Defines for UDP PACKET TYPE */
+#define UDP_PTPIPE_TYPE 	0x01
+#define UDP_FPIPE_TYPE		0x02
+#define UDP_CPIPE_TYPE		0x03
+#define UDP_DRVSTATS_TYPE 	0x04
+#define UDP_INVALID_TYPE  	0x05
+
+/* Command return code */
+#define CMD_OK		0		/* normal firmware return code */
+#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
+
+/* UDP Packet Management */
+#define UDP_PKT_FRM_STACK	0x00
+#define UDP_PKT_FRM_NETWORK	0x01
+
+/* Maximum interrupt test counter */
+#define MAX_INTR_TEST_COUNTER	100
+
+/* Critical Values for RACE conditions*/
+#define CRITICAL_IN_ISR		0xA1
+#define CRITICAL_INTR_HANDLED	0xB1
+
+/****** Data Types **********************************************************/
+
+/*----------------------------------------------------------------------------
+ * X.25-specific link-level configuration.
+ */
+typedef struct wan_x25_conf
+{
+	unsigned lo_pvc;	/* lowest permanent circuit number */
+	unsigned hi_pvc;	/* highest permanent circuit number */
+	unsigned lo_svc;	/* lowest switched circuit number */
+	unsigned hi_svc;	/* highest switched circuit number */
+	unsigned hdlc_window;	/* HDLC window size (1..7) */
+	unsigned pkt_window;	/* X.25 packet window size (1..7) */
+	unsigned t1;		/* HDLC timer T1, sec (1..30) */
+	unsigned t2;		/* HDLC timer T2, sec (0..29) */
+	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
+	unsigned n2;		/* HDLC retransmission limit (1..30) */
+	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
+	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
+	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
+	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
+	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
+	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
+	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
+	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
+	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
+	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
+	unsigned x25_conf_opt;   /* User defined x25 config optoins */
+	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
+	unsigned char logging;   /* Control connection logging */  
+	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
+} wan_x25_conf_t;
+
+/*----------------------------------------------------------------------------
+ * Frame relay specific link-level configuration.
+ */
+typedef struct wan_fr_conf
+{
+	unsigned signalling;	/* local in-channel signalling type */
+	unsigned t391;		/* link integrity verification timer */
+	unsigned t392;		/* polling verification timer */
+	unsigned n391;		/* full status polling cycle counter */
+	unsigned n392;		/* error threshold counter */
+	unsigned n393;		/* monitored events counter */
+	unsigned dlci_num;	/* number of DLCs (access node) */
+	unsigned  dlci[100];    /* List of all DLCIs */
+} wan_fr_conf_t;
+
+/*----------------------------------------------------------------------------
+ * PPP-specific link-level configuration.
+ */
+typedef struct wan_ppp_conf
+{
+	unsigned restart_tmr;	/* restart timer */
+	unsigned auth_rsrt_tmr;	/* authentication timer */
+	unsigned auth_wait_tmr;	/* authentication timer */
+	unsigned mdm_fail_tmr;	/* modem failure timer */
+	unsigned dtr_drop_tmr;	/* DTR drop timer */
+	unsigned connect_tmout;	/* connection timeout */
+	unsigned conf_retry;	/* max. retry */
+	unsigned term_retry;	/* max. retry */
+	unsigned fail_retry;	/* max. retry */
+	unsigned auth_retry;	/* max. retry */
+	unsigned auth_options;	/* authentication opt. */
+	unsigned ip_options;	/* IP options */
+	char	authenticator;	/* AUTHENTICATOR or not */
+	char	ip_mode;	/* Static/Host/Peer */
+} wan_ppp_conf_t;
+
+/*----------------------------------------------------------------------------
+ * CHDLC-specific link-level configuration.
+ */
+typedef struct wan_chdlc_conf
+{
+	unsigned char ignore_dcd;	/* Protocol options:		*/
+	unsigned char ignore_cts;	/*  Ignore these to determine	*/
+	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
+	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+} wan_chdlc_conf_t;
+
+
+/*----------------------------------------------------------------------------
+ * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
+ */
+typedef struct wandev_conf
+{
+	unsigned magic;		/* magic number (for verification) */
+	unsigned config_id;	/* configuration structure identifier */
+				/****** hardware configuration ******/
+	unsigned ioport;	/* adapter I/O port base */
+	unsigned long maddr;	/* dual-port memory address */
+	unsigned msize;		/* dual-port memory size */
+	int irq;		/* interrupt request level */
+	int dma;		/* DMA request level */
+        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
+        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
+	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
+	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
+	unsigned bps;		/* data transfer rate */
+	unsigned mtu;		/* maximum transmit unit size */
+        unsigned udp_port;      /* UDP port for management */
+	unsigned char ttl;	/* Time To Live for UDP security */
+	unsigned char ft1;	/* FT1 Configurator Option */
+        char interface;		/* RS-232/V.35, etc. */
+	char clocking;		/* external/internal */
+	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
+	char station;		/* DTE/DCE, primary/secondary, etc. */
+	char connection;	/* permanent/switched/on-demand */
+	char read_mode;		/* read mode: Polling or interrupt */
+	char receive_only;	/* disable tx buffers */
+	char tty;		/* Create a fake tty device */
+	unsigned tty_major;	/* Major number for wanpipe tty device */
+	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
+	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
+	char backup;		/* Backup Mode */
+	unsigned hw_opt[4];	/* other hardware options */
+	unsigned reserved[4];
+				/****** arbitrary data ***************/
+	unsigned data_size;	/* data buffer size */
+	void* data;		/* data buffer, e.g. firmware */
+	union			/****** protocol-specific ************/
+	{
+		wan_x25_conf_t x25;	/* X.25 configuration */
+		wan_ppp_conf_t ppp;	/* PPP configuration */
+		wan_fr_conf_t fr;	/* frame relay configuration */
+		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
+	} u;
+} wandev_conf_t;
+
+/* 'config_id' definitions */
+#define	WANCONFIG_X25	101	/* X.25 link */
+#define	WANCONFIG_FR	102	/* frame relay link */
+#define	WANCONFIG_PPP	103	/* synchronous PPP link */
+#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
+#define WANCONFIG_BSC	105	/* BiSync Streaming */
+#define WANCONFIG_HDLC	106	/* HDLC Support */
+#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
+
+/*
+ * Configuration options defines.
+ */
+/* general options */
+#define	WANOPT_OFF	0
+#define	WANOPT_ON	1
+#define	WANOPT_NO	0
+#define	WANOPT_YES	1
+
+/* intercace options */
+#define	WANOPT_RS232	0
+#define	WANOPT_V35	1
+
+/* data encoding options */
+#define	WANOPT_NRZ	0
+#define	WANOPT_NRZI	1
+#define	WANOPT_FM0	2
+#define	WANOPT_FM1	3
+
+/* link type options */
+#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
+#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
+
+/* clocking options */
+#define	WANOPT_EXTERNAL	0
+#define	WANOPT_INTERNAL	1
+
+/* station options */
+#define	WANOPT_DTE		0
+#define	WANOPT_DCE		1
+#define	WANOPT_CPE		0
+#define	WANOPT_NODE		1
+#define	WANOPT_SECONDARY	0
+#define	WANOPT_PRIMARY		1
+
+/* connection options */
+#define	WANOPT_PERMANENT	0	/* DTR always active */
+#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
+#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
+
+/* frame relay in-channel signalling */
+#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
+#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
+#define	WANOPT_FR_LMI		3	/* LMI */
+
+/* PPP IP Mode Options */
+#define	WANOPT_PPP_STATIC	0
+#define	WANOPT_PPP_HOST		1
+#define	WANOPT_PPP_PEER		2
+
+/* ASY Mode Options */
+#define WANOPT_ONE 		1
+#define WANOPT_TWO		2
+#define WANOPT_ONE_AND_HALF	3
+
+#define WANOPT_NONE	0
+#define WANOPT_ODD      1
+#define WANOPT_EVEN	2
+
+/* CHDLC Protocol Options */
+/* DF Commented out for now.
+
+#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
+*/
+
+/* Port options */
+#define WANOPT_PRI 0
+#define WANOPT_SEC 1
+/* read mode */
+#define	WANOPT_INTR	0
+#define WANOPT_POLL	1
+
+
+#define WANOPT_TTY_SYNC  0
+#define WANOPT_TTY_ASYNC 1
+/*----------------------------------------------------------------------------
+ * WAN Link Status Info (for ROUTER_STAT IOCTL).
+ */
+typedef struct wandev_stat
+{
+	unsigned state;		/* link state */
+	unsigned ndev;		/* number of configured interfaces */
+
+	/* link/interface configuration */
+	unsigned connection;	/* permanent/switched/on-demand */
+	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
+	unsigned mtu;		/* max. transmit unit for this device */
+
+	/* physical level statistics */
+	unsigned modem_status;	/* modem status */
+	unsigned rx_frames;	/* received frames count */
+	unsigned rx_overruns;	/* receiver overrun error count */
+	unsigned rx_crc_err;	/* receive CRC error count */
+	unsigned rx_aborts;	/* received aborted frames count */
+	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
+	unsigned rx_dropped;	/* frames discarded at device level */
+	unsigned tx_frames;	/* transmitted frames count */
+	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
+	unsigned tx_timeouts;	/* transmission timeouts */
+	unsigned tx_rejects;	/* other transmit errors */
+
+	/* media level statistics */
+	unsigned rx_bad_format;	/* frames with invalid format */
+	unsigned rx_bad_addr;	/* frames with invalid media address */
+	unsigned tx_retries;	/* frames re-transmitted */
+	unsigned reserved[16];	/* reserved for future use */
+} wandev_stat_t;
+
+/* 'state' defines */
+enum wan_states
+{
+	WAN_UNCONFIGURED,	/* link/channel is not configured */
+	WAN_DISCONNECTED,	/* link/channel is disconnected */
+	WAN_CONNECTING,		/* connection is in progress */
+	WAN_CONNECTED,		/* link/channel is operational */
+	WAN_LIMIT,		/* for verification only */
+	WAN_DUALPORT,		/* for Dual Port cards */
+	WAN_DISCONNECTING,
+	WAN_FT1_READY		/* FT1 Configurator Ready */
+};
+
+enum {
+	WAN_LOCAL_IP,
+	WAN_POINTOPOINT_IP,
+	WAN_NETMASK_IP,
+	WAN_BROADCAST_IP
+};
+
+/* 'modem_status' masks */
+#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
+#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
+#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
+#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
+
+/*----------------------------------------------------------------------------
+ * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
+ */
+typedef struct wanif_conf
+{
+	unsigned magic;			/* magic number */
+	unsigned config_id;		/* configuration identifier */
+	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
+	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
+	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
+	unsigned idle_timeout;		/* sec, before disconnecting */
+	unsigned hold_timeout;		/* sec, before re-connecting */
+	unsigned cir;			/* Committed Information Rate fwd,bwd*/
+	unsigned bc;			/* Committed Burst Size fwd, bwd */
+	unsigned be;			/* Excess Burst Size fwd, bwd */ 
+	unsigned char enable_IPX;	/* Enable or Disable IPX */
+	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
+	unsigned inarp_interval;	/* sec, between InARP requests */
+	unsigned long network_number;	/* Network Number for IPX */
+	char mc;			/* Multicast on or off */
+	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
+	unsigned char port;		/* board port */
+	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
+	char pap;			/* PAP enabled or disabled */
+	char chap;			/* CHAP enabled or disabled */
+	unsigned char userid[511];	/* List of User Id */
+	unsigned char passwd[511];	/* List of passwords */
+	unsigned char sysname[31];	/* Name of the system */
+	unsigned char ignore_dcd;	/* Protocol options: */
+	unsigned char ignore_cts;	/*  Ignore these to determine */
+	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
+	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+	unsigned char ttl;		/* Time To Live for UDP security */
+	char interface;			/* RS-232/V.35, etc. */
+	char clocking;			/* external/internal */
+	unsigned bps;			/* data transfer rate */
+	unsigned mtu;			/* maximum transmit unit size */
+	unsigned char if_down;		/* brind down interface when disconnected */
+	unsigned char gateway;		/* Is this interface a gateway */
+	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
+
+	unsigned char asy_data_trans;     /* async API options */
+        unsigned char rts_hs_for_receive; /* async Protocol options */
+        unsigned char xon_xoff_hs_for_receive;
+	unsigned char xon_xoff_hs_for_transmit;
+	unsigned char dcd_hs_for_transmit;
+	unsigned char cts_hs_for_transmit;
+	unsigned char async_mode;
+	unsigned tx_bits_per_char;
+	unsigned rx_bits_per_char;
+	unsigned stop_bits;  
+	unsigned char parity;
+ 	unsigned break_timer;
+        unsigned inter_char_timer;
+	unsigned rx_complete_length;
+	unsigned xon_char;
+	unsigned xoff_char;
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+} wanif_conf_t;
+
+#endif /* _UAPI_ROUTER_H */
diff --git a/include/uapi/linux/watchdog.h b/include/uapi/linux/watchdog.h
new file mode 100644
index 0000000000000000000000000000000000000000..2babe72870ba8be7b61da1dc858244576c2e1e92
--- /dev/null
+++ b/include/uapi/linux/watchdog.h
@@ -0,0 +1,57 @@
+/*
+ *	Generic watchdog defines. Derived from..
+ *
+ * Berkshire PC Watchdog Defines
+ * by Ken Hollis <khollis@bitgate.com>
+ *
+ */
+
+#ifndef _UAPI_LINUX_WATCHDOG_H
+#define _UAPI_LINUX_WATCHDOG_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define	WATCHDOG_IOCTL_BASE	'W'
+
+struct watchdog_info {
+	__u32 options;		/* Options the card/driver supports */
+	__u32 firmware_version;	/* Firmware version of the card */
+	__u8  identity[32];	/* Identity of the board */
+};
+
+#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
+#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
+#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
+#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
+#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
+#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
+#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
+#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
+#define	WDIOC_SETPRETIMEOUT	_IOWR(WATCHDOG_IOCTL_BASE, 8, int)
+#define	WDIOC_GETPRETIMEOUT	_IOR(WATCHDOG_IOCTL_BASE, 9, int)
+#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)
+
+#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
+#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
+
+#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
+#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
+#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
+#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
+#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
+#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
+#define	WDIOF_POWEROVER		0x0040	/* Power over voltage */
+#define	WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
+#define	WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
+#define	WDIOF_PRETIMEOUT	0x0200  /* Pretimeout (in seconds), get/set */
+#define	WDIOF_ALARMONLY		0x0400	/* Watchdog triggers a management or
+					   other external alarm not a reboot */
+#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
+
+#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
+#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
+#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
+
+
+#endif /* _UAPI_LINUX_WATCHDOG_H */
diff --git a/include/linux/wimax.h b/include/uapi/linux/wimax.h
similarity index 100%
rename from include/linux/wimax.h
rename to include/uapi/linux/wimax.h
diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h
new file mode 100644
index 0000000000000000000000000000000000000000..c1592e3e40369b9c629e1b020df369e2ab5bbbaf
--- /dev/null
+++ b/include/uapi/linux/wireless.h
@@ -0,0 +1,1128 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version :	22	16.3.07
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _UAPI_LINUX_WIRELESS_H
+#define _UAPI_LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands.  This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ *	# net/core/dev.c (two place + add include)
+ *	# net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ *	# net/core/dev.c (two other places)
+ *	# include/linux/netdevice.h (one place)
+ *	# include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ *	# include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ *	# net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ *	# net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/types.h>		/* for __u* and __s* typedefs */
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/if.h>			/* for IFNAMSIZ and co... */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT	22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	Alan Cox start some incompatibles changes. I've integrated a bit more.
+ *	- Encryption renamed to Encode to avoid US regulation problems
+ *	- Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ *	- Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ *	- Missing encoding definitions in range
+ *	- Access points stuff
+ *
+ * V5 to V6
+ * --------
+ *	- 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ *	- Changed my e-mail address
+ *	- More 802.11 support (nickname, rate, rts, frag)
+ *	- List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ *	- Support for 'mode of operation' (ad-hoc, managed...)
+ *	- Support for unicast and multicast power saving
+ *	- Change encoding to support larger tokens (>64 bits)
+ *	- Updated iw_params (disable, flags) and use it for NWID
+ *	- Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ *	- Add PM capability to range structure
+ *	- Add PM modifier : MAX/MIN/RELATIVE
+ *	- Add encoding option : IW_ENCODE_NOKEY
+ *	- Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ *	- Add WE version in range (help backward/forward compatibility)
+ *	- Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ *	- Add new statistics (frag, retry, beacon)
+ *	- Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ *	- Document creation of new driver API.
+ *	- Extract union iwreq_data from struct iwreq (for new driver API).
+ *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ *	- Wireless Events support : define struct iw_event
+ *	- Define additional specific event numbers
+ *	- Add "addr" and "param" fields in union iwreq_data
+ *	- AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ *	- Make struct iw_freq signed (both m & e), add explicit padding
+ *	- Add IWEVCUSTOM for driver specific event/scanning token
+ *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ *	- Add IW_TXPOW_RANGE for range of Tx Powers
+ *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ *	- Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ *	- Reshuffle struct iw_range for increases, add filler
+ *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ *	- Add flags to frequency -> auto/fixed
+ *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
+ *	- Wireless Event capability in struct iw_range
+ *	- Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
+ * ----------
+ *	- Add support for WPA/WPA2
+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
+ *	  SIOCGIWENCODEEXT)
+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
+ *	- Add SIOCSIWMLME
+ *	- Add SIOCSIWPMKSA
+ *	- Add struct iw_range bit field for supported encoding capabilities
+ *	- Add optional scan request parameters for SIOCSIWSCAN
+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ *	  related parameters (extensible up to 4096 parameter values)
+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ *	- Remove (struct iw_point *)->pointer from events and streams
+ *	- Remove header includes to help user space
+ *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ *	- RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ *	- Remove (struct net_device *)->get_wireless_stats()
+ *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
+ *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ *	- Power/Retry relative values no longer * 100000
+ *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ *	- Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
+#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
+#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
+#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
+#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
+#define SIOCSIWMODE	0x8B06		/* set operation mode */
+#define SIOCGIWMODE	0x8B07		/* get operation mode */
+#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
+#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE	0x8B0A		/* Unused */
+#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
+#define SIOCSIWPRIV	0x8B0C		/* Unused */
+#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
+#define SIOCSIWSTATS	0x8B0E		/* Unused */
+#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY	0x8B10		/* set spy addresses */
+#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
+#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
+#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
+#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
+#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
+#define SIOCGIWSCAN	0x8B19		/* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
+#define SIOCGIWESSID	0x8B1B		/* get ESSID */
+#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
+#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
+#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
+#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
+#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
+#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
+#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
+#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
+#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
+					 * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV	0x8BE0
+#define SIOCIWLASTPRIV	0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST	0x8B00
+#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
+#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
+#define IW_HANDLER(id, func)			\
+	[IW_IOCTL_IDX(id)] = func
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
+#define IW_IS_GET(cmd)	((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
+#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
+#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
+#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
+#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
+					 * (scan results); This includes id and
+					 * length fields. One IWEVGENIE may
+					 * contain more than one IE. Scan
+					 * results may contain one or more
+					 * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
+					 * (struct iw_michaelmicfailure)
+					 */
+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
+					 * The data includes id and length
+					 * fields and may contain more than one
+					 * IE. This event is required in
+					 * Managed mode if the driver
+					 * generates its own WPA/RSN IE. This
+					 * should be sent just before
+					 * IWEVREGISTERED event for the
+					 * association. */
+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
+					 * Response. The data includes id and
+					 * length fields and may contain more
+					 * than one IE. This may be sent
+					 * between IWEVASSOCREQIE and
+					 * IWEVREGISTERED events for the
+					 * association. */
+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
+					 * pre-authentication
+					 * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST	0x8C00
+#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
+#define IW_PRIV_TYPE_NONE	0x0000
+#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
+#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
+#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES	32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES		32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER		8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY		8
+
+/* Maximum of address that you may get in the
+   list of access points in range */
+#define IW_MAX_AP		64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE	32
+
+/* Modes of operation */
+#define IW_MODE_AUTO	0	/* Let the driver decides */
+#define IW_MODE_ADHOC	1	/* Single cell network */
+#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
+#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED	0x02
+#define IW_QUAL_NOISE_UPDATED	0x04
+#define IW_QUAL_ALL_UPDATED	0x07
+#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID	0x20
+#define IW_QUAL_NOISE_INVALID	0x40
+#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID	0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
+#define IW_FREQ_FIXED		0x01	/* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES	8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
+#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
+#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
+#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
+#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
+#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
+#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON		0x0000	/* No details... */
+#define IW_POWER_TYPE		0xF000	/* Type of parameter */
+#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
+#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE		0x0F00	/* Power Management mode */
+#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
+#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
+#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
+#define IW_POWER_MAX		0x0002	/* Value is a maximum */
+#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
+#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
+#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
+#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
+#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON		0x0000	/* No details... */
+#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
+#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
+#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
+#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
+#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
+#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
+#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
+#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
+#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA	4096	/* In bytes */
+
+/* Scan capability flags - in (struct iw_range *)->scan_capa */
+#define IW_SCAN_CAPA_NONE		0x00
+#define IW_SCAN_CAPA_ESSID		0x01
+#define IW_SCAN_CAPA_BSSID		0x02
+#define IW_SCAN_CAPA_CHANNEL	0x04
+#define IW_SCAN_CAPA_MODE		0x08
+#define IW_SCAN_CAPA_RATE		0x10
+#define IW_SCAN_CAPA_TYPE		0x20
+#define IW_SCAN_CAPA_TIME		0x40
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX		256	/* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX	1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH		0
+#define IW_MLME_DISASSOC	1
+#define IW_MLME_AUTH		2
+#define IW_MLME_ASSOC		3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX		0x0FFF
+#define IW_AUTH_FLAGS		0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION		0
+#define IW_AUTH_CIPHER_PAIRWISE		1
+#define IW_AUTH_CIPHER_GROUP		2
+#define IW_AUTH_KEY_MGMT		3
+#define IW_AUTH_TKIP_COUNTERMEASURES	4
+#define IW_AUTH_DROP_UNENCRYPTED	5
+#define IW_AUTH_80211_AUTH_ALG		6
+#define IW_AUTH_WPA_ENABLED		7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
+#define IW_AUTH_ROAMING_CONTROL		9
+#define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
+#define IW_AUTH_CIPHER_NONE	0x00000001
+#define IW_AUTH_CIPHER_WEP40	0x00000002
+#define IW_AUTH_CIPHER_TKIP	0x00000004
+#define IW_AUTH_CIPHER_CCMP	0x00000008
+#define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X	1
+#define IW_AUTH_KEY_MGMT_PSK	2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
+#define IW_AUTH_ALG_LEAP	0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
+					 * control */
+
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE	8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE	0
+#define IW_ENCODE_ALG_WEP	1
+#define IW_ENCODE_ALG_TKIP	2
+#define IW_ENCODE_ALG_CCMP	3
+#define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP	0x00000004
+#define IW_MICFAILURE_PAIRWISE	0x00000008
+#define IW_MICFAILURE_STAKEY	0x00000010
+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
+					    */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA		0x00000001
+#define IW_ENC_CAPA_WPA2	0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
+#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
+					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+					 (cmd - SIOCIWFIRST))
+#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
+				 IW_EVENT_CAPA_MASK(0x8B06) | \
+				 IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ *	Generic format for most parameters that fit in an int
+ */
+struct	iw_param
+{
+  __s32		value;		/* The value of the parameter itself */
+  __u8		fixed;		/* Hardware should not use auto select */
+  __u8		disabled;	/* Disable the feature */
+  __u16		flags;		/* Various specifc flags (if any) */
+};
+
+/*
+ *	For all data larger than 16 octets, we need to use a
+ *	pointer to memory allocated in user space.
+ */
+struct	iw_point
+{
+  void __user	*pointer;	/* Pointer to the data  (in user space) */
+  __u16		length;		/* number of fields or size in bytes */
+  __u16		flags;		/* Optional params */
+};
+
+
+/*
+ *	A frequency
+ *	For numbers lower than 10^9, we encode the number in 'm' and
+ *	set 'e' to 0
+ *	For number greater than 10^9, we divide it by the lowest power
+ *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ *	The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct	iw_freq
+{
+	__s32		m;		/* Mantissa */
+	__s16		e;		/* Exponent */
+	__u8		i;		/* List index (when in range struct) */
+	__u8		flags;		/* Flags (fixed/auto) */
+};
+
+/*
+ *	Quality of the link
+ */
+struct	iw_quality
+{
+	__u8		qual;		/* link quality (%retries, SNR,
+					   %missed beacons or better...) */
+	__u8		level;		/* signal level (dBm) */
+	__u8		noise;		/* noise level (dBm) */
+	__u8		updated;	/* Flags to know if updated */
+};
+
+/*
+ *	Packet discarded in the wireless adapter due to
+ *	"wireless" specific problems...
+ *	Note : the list of counter and statistics in net_device_stats
+ *	is already pretty exhaustive, and you should use that first.
+ *	This is only additional stats...
+ */
+struct	iw_discarded
+{
+	__u32		nwid;		/* Rx : Wrong nwid/essid */
+	__u32		code;		/* Rx : Unable to code/decode (WEP) */
+	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
+	__u32		retries;	/* Tx : Max MAC retries num reached */
+	__u32		misc;		/* Others cases */
+};
+
+/*
+ *	Packet/Time period missed in the wireless adapter due to
+ *	"wireless" specific problems...
+ */
+struct	iw_missed
+{
+	__u32		beacon;		/* Missed beacons/superframe */
+};
+
+/*
+ *	Quality range (for spy threshold)
+ */
+struct	iw_thrspy
+{
+	struct sockaddr		addr;		/* Source address (hw/mac) */
+	struct iw_quality	qual;		/* Quality of the link */
+	struct iw_quality	low;		/* Low threshold */
+	struct iw_quality	high;		/* High threshold */
+};
+
+/*
+ *	Optional data for scan request
+ *
+ *	Note: these optional parameters are controlling parameters for the
+ *	scanning behavior, these do not apply to getting scan results
+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ *	provide a merged results with all BSSes even if the previous scan
+ *	request limited scanning to a subset, e.g., by specifying an SSID.
+ *	Especially, scan results are required to include an entry for the
+ *	current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct	iw_scan_req
+{
+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+	__u8		essid_len;
+	__u8		num_channels; /* num entries in channel_list;
+				       * 0 = scan all allowed channels */
+	__u8		flags; /* reserved as padding; use zero, this may
+				* be used in the future for adding flags
+				* to request different scan behavior */
+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+				* individual address of a specific BSS */
+
+	/*
+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+	 * the current ESSID. This allows scan requests for specific ESSID
+	 * without having to change the current ESSID and potentially breaking
+	 * the current association.
+	 */
+	__u8		essid[IW_ESSID_MAX_SIZE];
+
+	/*
+	 * Optional parameters for changing the default scanning behavior.
+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
+	 * reasonable default values. min_channel_time defines the time that
+	 * will be used to wait for the first reply on each channel. If no
+	 * replies are received, next channel will be scanned after this. If
+	 * replies are received, total time waited on the channel is defined by
+	 * max_channel_time.
+	 */
+	__u32		min_channel_time; /* in TU */
+	__u32		max_channel_time; /* in TU */
+
+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ *	Extended data structure for get/set encoding (this is used with
+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ *	only the data contents changes (key data -> this structure, including
+ *	key data).
+ *
+ *	If the new key is the first group key, it will be set as the default
+ *	TX key. Otherwise, default TX key index is only changed if
+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ *	special "change TX key index" operation which is indicated by setting
+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ *	tx_seq/rx_seq are only used when respective
+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ *	used only by an Authenticator (AP or an IBSS station) to get the
+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ *	debugging/testing.
+ */
+struct	iw_encode_ext
+{
+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+			       * (group) keys or unicast address for
+			       * individual keys */
+	__u16		alg; /* IW_ENCODE_ALG_* */
+	__u16		key_len;
+	__u8		key[0];
+};
+
+/* SIOCSIWMLME data */
+struct	iw_mlme
+{
+	__u16		cmd; /* IW_MLME_* */
+	__u16		reason_code;
+	struct sockaddr	addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD		1
+#define IW_PMKSA_REMOVE		2
+#define IW_PMKSA_FLUSH		3
+
+#define IW_PMKID_LEN	16
+
+struct	iw_pmksa
+{
+	__u32		cmd; /* IW_PMKSA_* */
+	struct sockaddr	bssid;
+	__u8		pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct	iw_michaelmicfailure
+{
+	__u32		flags;
+	struct sockaddr	src_addr;
+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
+struct	iw_pmkid_cand
+{
+	__u32		flags; /* IW_PMKID_CAND_* */
+	__u32		index; /* the smaller the index, the higher the
+				* priority */
+	struct sockaddr	bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct	iw_statistics
+{
+	__u16		status;		/* Status
+					 * - device dependent for now */
+
+	struct iw_quality	qual;		/* Quality of the link
+						 * (instant/mean/max) */
+	struct iw_discarded	discard;	/* Packet discarded counts */
+	struct iw_missed	miss;		/* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used 
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union	iwreq_data
+{
+	/* Config - generic */
+	char		name[IFNAMSIZ];
+	/* Name : used to verify the presence of  wireless extensions.
+	 * Name of the protocol/provider... */
+
+	struct iw_point	essid;		/* Extended network name */
+	struct iw_param	nwid;		/* network id (or domain - the cell) */
+	struct iw_freq	freq;		/* frequency or channel :
+					 * 0-1000 = channel
+					 * > 1000 = frequency in Hz */
+
+	struct iw_param	sens;		/* signal level threshold */
+	struct iw_param	bitrate;	/* default bit rate */
+	struct iw_param	txpower;	/* default transmit power */
+	struct iw_param	rts;		/* RTS threshold threshold */
+	struct iw_param	frag;		/* Fragmentation threshold */
+	__u32		mode;		/* Operation mode */
+	struct iw_param	retry;		/* Retry limits & lifetime */
+
+	struct iw_point	encoding;	/* Encoding stuff : tokens */
+	struct iw_param	power;		/* PM duration/timeout */
+	struct iw_quality qual;		/* Quality part of statistics */
+
+	struct sockaddr	ap_addr;	/* Access point address */
+	struct sockaddr	addr;		/* Destination address (hw/mac) */
+
+	struct iw_param	param;		/* Other small parameters */
+	struct iw_point	data;		/* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct	iwreq 
+{
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
+	} ifr_ifrn;
+
+	/* Data part (defined just above) */
+	union	iwreq_data	u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ *	For those ioctl which want to exchange mode data that what could
+ *	fit in the above structure...
+ */
+
+/*
+ *	Range of parameters
+ */
+
+struct	iw_range
+{
+	/* Informative stuff (to choose between different interface) */
+	__u32		throughput;	/* To give an idea... */
+	/* In theory this value should be the maximum benchmarked
+	 * TCP/IP throughput, because with most of these devices the
+	 * bit rate is meaningless (overhead an co) to estimate how
+	 * fast the connection will go and pick the fastest one.
+	 * I suggest people to play with Netperf or any benchmark...
+	 */
+
+	/* NWID (or domain id) */
+	__u32		min_nwid;	/* Minimal NWID we are able to set */
+	__u32		max_nwid;	/* Maximal NWID we are able to set */
+
+	/* Old Frequency (backward compat - moved lower ) */
+	__u16		old_num_channels;
+	__u8		old_num_frequency;
+
+	/* Scan capabilities */
+	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
+
+	/* Wireless event capability bitmasks */
+	__u32		event_capa[6];
+
+	/* signal level threshold range */
+	__s32		sensitivity;
+
+	/* Quality of link & SNR stuff */
+	/* Quality range (link, level, noise)
+	 * If the quality is absolute, it will be in the range [0 ; max_qual],
+	 * if the quality is dBm, it will be in the range [max_qual ; 0].
+	 * Don't forget that we use 8 bit arithmetics... */
+	struct iw_quality	max_qual;	/* Quality of the link */
+	/* This should contain the average/typical values of the quality
+	 * indicator. This should be the threshold between a "good" and
+	 * a "bad" link (example : monitor going from green to orange).
+	 * Currently, user space apps like quality monitors don't have any
+	 * way to calibrate the measurement. With this, they can split
+	 * the range between 0 and max_qual in different quality level
+	 * (using a geometric subdivision centered on the average).
+	 * I expect that people doing the user space apps will feedback
+	 * us on which value we need to put in each driver... */
+	struct iw_quality	avg_qual;	/* Quality of the link */
+
+	/* Rates */
+	__u8		num_bitrates;	/* Number of entries in the list */
+	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
+
+	/* RTS threshold */
+	__s32		min_rts;	/* Minimal RTS threshold */
+	__s32		max_rts;	/* Maximal RTS threshold */
+
+	/* Frag threshold */
+	__s32		min_frag;	/* Minimal frag threshold */
+	__s32		max_frag;	/* Maximal frag threshold */
+
+	/* Power Management duration & timeout */
+	__s32		min_pmp;	/* Minimal PM period */
+	__s32		max_pmp;	/* Maximal PM period */
+	__s32		min_pmt;	/* Minimal PM timeout */
+	__s32		max_pmt;	/* Maximal PM timeout */
+	__u16		pmp_flags;	/* How to decode max/min PM period */
+	__u16		pmt_flags;	/* How to decode max/min PM timeout */
+	__u16		pm_capa;	/* What PM options are supported */
+
+	/* Encoder stuff */
+	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
+	__u8	num_encoding_sizes;	/* Number of entry in the list */
+	__u8	max_encoding_tokens;	/* Max number of tokens */
+	/* For drivers that need a "login/passwd" form */
+	__u8	encoding_login_index;	/* token index for login token */
+
+	/* Transmit power */
+	__u16		txpower_capa;	/* What options are supported */
+	__u8		num_txpower;	/* Number of entries in the list */
+	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
+
+	/* Wireless Extension version info */
+	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
+	__u8		we_version_source;	/* Last update of source */
+
+	/* Retry limits and lifetime */
+	__u16		retry_capa;	/* What retry options are supported */
+	__u16		retry_flags;	/* How to decode max/min retry limit */
+	__u16		r_time_flags;	/* How to decode max/min retry life */
+	__s32		min_retry;	/* Minimal number of retries */
+	__s32		max_retry;	/* Maximal number of retries */
+	__s32		min_r_time;	/* Minimal retry lifetime */
+	__s32		max_r_time;	/* Maximal retry lifetime */
+
+	/* Frequency */
+	__u16		num_channels;	/* Number of channels [0; num - 1] */
+	__u8		num_frequency;	/* Number of entry in the list */
+	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
+	/* Note : this frequency list doesn't need to fit channel numbers,
+	 * because each entry contain its channel index */
+
+	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
+};
+
+/*
+ * Private ioctl interface information
+ */
+ 
+struct	iw_priv_args
+{
+	__u32		cmd;		/* Number of the ioctl to issue */
+	__u16		set_args;	/* Type and number of args */
+	__u16		get_args;	/* Type and number of args */
+	char		name[IFNAMSIZ];	/* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	union iwreq_data	u;		/* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+			  (char *) NULL)
+#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+			 IW_EV_POINT_OFF)
+
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN	(4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
+#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
+
+#endif /* _UAPI_LINUX_WIRELESS_H */
diff --git a/include/linux/x25.h b/include/uapi/linux/x25.h
similarity index 100%
rename from include/linux/x25.h
rename to include/uapi/linux/x25.h
diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h
new file mode 100644
index 0000000000000000000000000000000000000000..26607bd965fa7ec38e3e898ccc9ae1c2320f6a5f
--- /dev/null
+++ b/include/uapi/linux/xattr.h
@@ -0,0 +1,64 @@
+/*
+  File: linux/xattr.h
+
+  Extended attributes handling.
+
+  Copyright (C) 2001 by Andreas Gruenbacher <a.gruenbacher@computer.org>
+  Copyright (c) 2001-2002 Silicon Graphics, Inc.  All Rights Reserved.
+  Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+*/
+#ifndef _UAPI_LINUX_XATTR_H
+#define _UAPI_LINUX_XATTR_H
+
+#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
+#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
+
+/* Namespaces */
+#define XATTR_OS2_PREFIX "os2."
+#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
+
+#define XATTR_SECURITY_PREFIX	"security."
+#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
+
+#define XATTR_SYSTEM_PREFIX "system."
+#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
+
+#define XATTR_TRUSTED_PREFIX "trusted."
+#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
+
+#define XATTR_USER_PREFIX "user."
+#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
+
+/* Security namespace */
+#define XATTR_EVM_SUFFIX "evm"
+#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
+
+#define XATTR_IMA_SUFFIX "ima"
+#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
+
+#define XATTR_SELINUX_SUFFIX "selinux"
+#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
+
+#define XATTR_SMACK_SUFFIX "SMACK64"
+#define XATTR_SMACK_IPIN "SMACK64IPIN"
+#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
+#define XATTR_SMACK_EXEC "SMACK64EXEC"
+#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
+#define XATTR_SMACK_MMAP "SMACK64MMAP"
+#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
+#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
+#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
+#define XATTR_NAME_SMACKEXEC	XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
+#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
+#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
+
+#define XATTR_CAPS_SUFFIX "capability"
+#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
+
+#define XATTR_POSIX_ACL_ACCESS  "posix_acl_access"
+#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
+#define XATTR_POSIX_ACL_DEFAULT  "posix_acl_default"
+#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
+
+
+#endif /* _UAPI_LINUX_XATTR_H */
diff --git a/include/linux/xfrm.h b/include/uapi/linux/xfrm.h
similarity index 100%
rename from include/linux/xfrm.h
rename to include/uapi/linux/xfrm.h
diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c
index f576971f6556f0b08dcd30ef24af4fef61d01e91..cd1b03e80899960147c9fc18777a1f5a35f9e08f 100644
--- a/tools/vm/page-types.c
+++ b/tools/vm/page-types.c
@@ -34,7 +34,7 @@
 #include <sys/fcntl.h>
 #include <sys/mount.h>
 #include <sys/statfs.h>
-#include "../../include/linux/magic.h"
+#include "../../include/uapi/linux/magic.h"
 #include "../../include/linux/kernel-page-flags.h"