From 0afacde3df4c9980f505d9afd7cb0058389732ca Mon Sep 17 00:00:00 2001 From: "arnd@arndb.de" Date: Tue, 24 Oct 2006 18:31:18 +0200 Subject: [PATCH] [POWERPC] spufs: allow isolated mode apps by starting the SPE loader This patch adds general support for isolated mode SPE apps. Isolated apps are started indirectly, by a dedicated loader "kernel". This patch starts the loader when spe_create is invoked with the ISOLATE flag. We do this at spe_create time to allow libspe to pass the isolated app in before calling spe_run. The loader is read from the device tree, at the location "/spu-isolation/loader". If the loader is not present, an attempt to start an isolated SPE binary will fail with -ENODEV. Update: loader needs to be correctly aligned - copy to a kmalloced buf. Update: remove workaround for systemsim/spurom 'L-bit' bug, which has been fixed. Update: don't write to runcntl on spu_run_init: SPU is already running. Update: do spu_setup_isolated earlier Tested on systemsim. Signed-off-by: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 35 +++++-- arch/powerpc/platforms/cell/spufs/inode.c | 117 ++++++++++++++++++++++ arch/powerpc/platforms/cell/spufs/run.c | 12 ++- 3 files changed, 148 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index f6c94087db40..d78b0af038e6 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -89,7 +89,30 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) printk("%s: invalid access during switch!\n", __func__); return 1; } - if (!mm || (REGION_ID(ea) != USER_REGION_ID)) { + esid = (ea & ESID_MASK) | SLB_ESID_V; + + switch(REGION_ID(ea)) { + case USER_REGION_ID: +#ifdef CONFIG_HUGETLB_PAGE + if (in_hugepage_area(mm->context, ea)) + llp = mmu_psize_defs[mmu_huge_psize].sllp; + else +#endif + llp = mmu_psize_defs[mmu_virtual_psize].sllp; + vsid = (get_vsid(mm->context.id, ea) << SLB_VSID_SHIFT) | + SLB_VSID_USER | llp; + break; + case VMALLOC_REGION_ID: + llp = mmu_psize_defs[mmu_virtual_psize].sllp; + vsid = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | + SLB_VSID_KERNEL | llp; + break; + case KERNEL_REGION_ID: + llp = mmu_psize_defs[mmu_linear_psize].sllp; + vsid = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | + SLB_VSID_KERNEL | llp; + break; + default: /* Future: support kernel segments so that drivers * can use SPUs. */ @@ -97,16 +120,6 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) return 1; } - esid = (ea & ESID_MASK) | SLB_ESID_V; -#ifdef CONFIG_HUGETLB_PAGE - if (in_hugepage_area(mm->context, ea)) - llp = mmu_psize_defs[mmu_huge_psize].sllp; - else -#endif - llp = mmu_psize_defs[mmu_virtual_psize].sllp; - vsid = (get_vsid(mm->context.id, ea) << SLB_VSID_SHIFT) | - SLB_VSID_USER | llp; - out_be64(&priv2->slb_index_W, spu->slb_replace); out_be64(&priv2->slb_vsid_RW, vsid); out_be64(&priv2->slb_esid_RW, esid); diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 787ae71a6859..c8751936672a 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -33,6 +33,8 @@ #include #include +#include +#include #include #include #include @@ -41,6 +43,7 @@ #include "spufs.h" static kmem_cache_t *spufs_inode_cache; +static char *isolated_loader; static struct inode * spufs_alloc_inode(struct super_block *sb) @@ -232,6 +235,89 @@ struct file_operations spufs_context_fops = { .fsync = simple_sync_file, }; +static int spu_setup_isolated(struct spu_context *ctx) +{ + int ret; + u64 __iomem *mfc_cntl; + u64 sr1; + u32 status; + unsigned long timeout; + const u32 status_loading = SPU_STATUS_RUNNING + | SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS; + + if (!isolated_loader) + return -ENODEV; + + if ((ret = spu_acquire_runnable(ctx)) != 0) + return ret; + + mfc_cntl = &ctx->spu->priv2->mfc_control_RW; + + /* purge the MFC DMA queue to ensure no spurious accesses before we + * enter kernel mode */ + timeout = jiffies + HZ; + out_be64(mfc_cntl, MFC_CNTL_PURGE_DMA_REQUEST); + while ((in_be64(mfc_cntl) & MFC_CNTL_PURGE_DMA_STATUS_MASK) + != MFC_CNTL_PURGE_DMA_COMPLETE) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", + __FUNCTION__); + ret = -EIO; + goto out_unlock; + } + cond_resched(); + } + + /* put the SPE in kernel mode to allow access to the loader */ + sr1 = spu_mfc_sr1_get(ctx->spu); + sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK; + spu_mfc_sr1_set(ctx->spu, sr1); + + /* start the loader */ + ctx->ops->signal1_write(ctx, (unsigned long)isolated_loader >> 32); + ctx->ops->signal2_write(ctx, + (unsigned long)isolated_loader & 0xffffffff); + + ctx->ops->runcntl_write(ctx, + SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); + + ret = 0; + timeout = jiffies + HZ; + while (((status = ctx->ops->status_read(ctx)) & status_loading) == + status_loading) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "%s: timeout waiting for loader\n", + __FUNCTION__); + ret = -EIO; + goto out_drop_priv; + } + cond_resched(); + } + + if (!(status & SPU_STATUS_RUNNING)) { + /* If isolated LOAD has failed: run SPU, we will get a stop-and + * signal later. */ + pr_debug("%s: isolated LOAD failed\n", __FUNCTION__); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); + ret = -EACCES; + + } else if (!(status & SPU_STATUS_ISOLATED_STATE)) { + /* This isn't allowed by the CBEA, but check anyway */ + pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); + ret = -EINVAL; + } + +out_drop_priv: + /* Finished accessing the loader. Drop kernel mode */ + sr1 |= MFC_STATE1_PROBLEM_STATE_MASK; + spu_mfc_sr1_set(ctx->spu, sr1); + +out_unlock: + up_write(&ctx->state_sema); + return ret; +} + static int spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, int mode) @@ -255,6 +341,11 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags, goto out_iput; ctx->flags = flags; + if (flags & SPU_CREATE_ISOLATE) { + ret = spu_setup_isolated(ctx); + if (ret) + goto out_iput; + } inode->i_op = &spufs_dir_inode_operations; inode->i_fop = &simple_dir_operations; @@ -555,6 +646,30 @@ spufs_parse_options(char *options, struct inode *root) return 1; } +static void +spufs_init_isolated_loader(void) +{ + struct device_node *dn; + const char *loader; + int size; + + dn = of_find_node_by_path("/spu-isolation"); + if (!dn) + return; + + loader = get_property(dn, "loader", &size); + if (!loader) + return; + + /* kmalloc should align on a 16 byte boundary..* */ + isolated_loader = kmalloc(size, GFP_KERNEL); + if (!isolated_loader) + return; + + memcpy(isolated_loader, loader, size); + printk(KERN_INFO "spufs: SPU isolation mode enabled\n"); +} + static int spufs_create_root(struct super_block *sb, void *data) { @@ -640,6 +755,8 @@ static int __init spufs_init(void) ret = register_spu_syscalls(&spufs_calls); if (ret) goto out_fs; + + spufs_init_isolated_loader(); return 0; out_fs: unregister_filesystem(&spufs_type); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 0c03a04b6a30..a4a0080c2233 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -1,3 +1,5 @@ +#define DEBUG + #include #include @@ -56,12 +58,12 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) if ((ret = spu_acquire_runnable(ctx)) != 0) return ret; - if (ctx->flags & SPU_CREATE_ISOLATE) - runcntl |= SPU_RUNCNTL_ISOLATE; - else + /* if we're in isolated mode, we would have started the SPU + * earlier, so don't do it again now. */ + if (!(ctx->flags & SPU_CREATE_ISOLATE)) { ctx->ops->npc_write(ctx, *npc); - - ctx->ops->runcntl_write(ctx, runcntl); + ctx->ops->runcntl_write(ctx, runcntl); + } return 0; } -- GitLab