OMAP4 ES2: HSMMC soft reset change

The omap4 es2 hsmmc has a updated soft reset logic.After the
reset is issued monitor a 0->1 transition first. The reset of
CMD or DATA lines is complete only after a 0->1->0 transition
of SRC or SRD bits.
Signed-off-by: NMadhusudhan Chikkature <madhu.cr@ti.com>
Tested-by: NAnand Gadiyar <gadiyar@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/hsmmc.c

@@ -303,6 +303,9 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 		else
 			mmc->slots[0].features |= HSMMC_HAS_PBIAS;
 
+		if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
+			mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
+
 		switch (c->mmc) {
 		case 1:
 			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {

arch/arm/plat-omap/include/plat/mmc.h

@@ -103,6 +103,7 @@ struct omap_mmc_platform_data {
 
 		/* we can put the features above into this variable */
 #define HSMMC_HAS_PBIAS		(1 << 0)
+#define HSMMC_HAS_UPDATED_RESET	(1 << 1)
 		unsigned features;
 
 		int switch_pin;			/* gpio (card detect) */

drivers/mmc/host/omap_hsmmc.c

@@ -982,6 +982,17 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
 	OMAP_HSMMC_WRITE(host->base, SYSCTL,
 			 OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
 
+	/*
+	 * OMAP4 ES2 and greater has an updated reset logic.
+	 * Monitor a 0->1 transition first
+	 */
+	if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
+		while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+					&& (i++ < limit))
+			cpu_relax();
+	}
+	i = 0;
+
 	while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
 		(i++ < limit))
 		cpu_relax();