提交 049da639 编写于 作者: M Mark Brown

Merge branch 'for-2.6.30' into for-2.6.31

...@@ -60,7 +60,6 @@ obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o ...@@ -60,7 +60,6 @@ obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o
obj-$(CONFIG_SND_SOC_WM8988) += snd-soc-wm8988.o obj-$(CONFIG_SND_SOC_WM8988) += snd-soc-wm8988.o
obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
obj-$(CONFIG_SND_SOC_WM8991) += snd-soc-wm8991.o
obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
...@@ -268,9 +268,11 @@ static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1); ...@@ -268,9 +268,11 @@ static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
static int wm8580_out_vu(struct snd_kcontrol *kcontrol, static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol) struct snd_ctl_elem_value *ucontrol)
{ {
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
int reg = kcontrol->private_value & 0xff; unsigned int reg = mc->reg;
int reg2 = (kcontrol->private_value >> 24) & 0xff; unsigned int reg2 = mc->rreg;
int ret; int ret;
u16 val; u16 val;
...@@ -292,15 +294,17 @@ static int wm8580_out_vu(struct snd_kcontrol *kcontrol, ...@@ -292,15 +294,17 @@ static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
return 0; return 0;
} }
#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \ #define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE, \ SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \ .tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_2r, \ .info = snd_soc_info_volsw_2r, \
.get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \ .get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
.private_value = (reg_left) | ((shift) << 8) | \ .private_value = (unsigned long)&(struct soc_mixer_control) \
((max) << 12) | ((invert) << 20) | ((reg_right) << 24) } {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
.max = xmax, .invert = xinvert} }
static const struct snd_kcontrol_new wm8580_snd_controls[] = { static const struct snd_kcontrol_new wm8580_snd_controls[] = {
SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume", SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
...@@ -522,7 +526,7 @@ static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai, ...@@ -522,7 +526,7 @@ static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai,
reg = wm8580_read(codec, WM8580_PLLA4 + offset); reg = wm8580_read(codec, WM8580_PLLA4 + offset);
reg &= ~0x3f; reg &= ~0x3f;
reg |= pll_div.prescale | pll_div.postscale << 1 | reg |= pll_div.prescale | pll_div.postscale << 1 |
pll_div.freqmode << 4; pll_div.freqmode << 3;
wm8580_write(codec, WM8580_PLLA4 + offset, reg); wm8580_write(codec, WM8580_PLLA4 + offset, reg);
......
...@@ -318,7 +318,7 @@ static int wm9705_reset(struct snd_soc_codec *codec) ...@@ -318,7 +318,7 @@ static int wm9705_reset(struct snd_soc_codec *codec)
} }
#ifdef CONFIG_PM #ifdef CONFIG_PM
static int wm9705_soc_suspend(struct platform_device *pdev) static int wm9705_soc_suspend(struct platform_device *pdev, pm_message_t msg)
{ {
struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec; struct snd_soc_codec *codec = socdev->card->codec;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册