未验证 提交 03183782 编写于 作者: A Amjad Ouled-Ameur 提交者: Mark Brown

spi: dt-bindings: amlogic, meson-gx-spicc: Add pinctrl names for SPI signal states

SPI pins of the SPICC Controller in Meson-GX needs to be controlled by
pin biais when idle. Therefore define three pinctrl names:
- default: SPI pins are controlled by spi function.
- idle-high: SCLK pin is pulled-up, but MOSI/MISO are still controlled
by spi function.
- idle-low: SCLK pin is pulled-down, but MOSI/MISO are still controlled
by spi function.
Reported-by: NDa Xue <da@libre.computer>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NAmjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221004-up-aml-fix-spi-v4-1-0342d8e10c49@baylibre.comSigned-off-by: NMark Brown <broonie@kernel.org>
上级 aea672d0
......@@ -10,9 +10,6 @@ title: Amlogic Meson SPI Communication Controller
maintainers:
- Neil Armstrong <neil.armstrong@linaro.org>
allOf:
- $ref: "spi-controller.yaml#"
description: |
The Meson SPICC is a generic SPI controller for general purpose Full-Duplex
communications with dedicated 16 words RX/TX PIO FIFOs.
......@@ -43,31 +40,53 @@ properties:
minItems: 1
maxItems: 2
if:
properties:
compatible:
contains:
enum:
- amlogic,meson-g12a-spicc
then:
properties:
clocks:
minItems: 2
clock-names:
items:
- const: core
- const: pclk
else:
properties:
clocks:
maxItems: 1
clock-names:
items:
- const: core
allOf:
- $ref: "spi-controller.yaml#"
- if:
properties:
compatible:
contains:
enum:
- amlogic,meson-g12a-spicc
then:
properties:
clocks:
minItems: 2
clock-names:
items:
- const: core
- const: pclk
else:
properties:
clocks:
maxItems: 1
clock-names:
items:
- const: core
- if:
properties:
compatible:
contains:
enum:
- amlogic,meson-gx-spicc
then:
properties:
pinctrl-0: true
pinctrl-1: true
pinctrl-2: true
pinctrl-names:
minItems: 1
items:
- const: default
- const: idle-high
- const: idle-low
required:
- compatible
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册