提交 0095d58b 编写于 作者: J Joe Perches 提交者: Paul Mundt

sh: include/asm-sh/: Spelling fixes.

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 eb9c7f41
......@@ -46,10 +46,10 @@
/* CPU Data Bus Control Register */
#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04)
/* Base Adress Register */
/* Base Address Register */
#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000)
/* Line increment adress */
/* Line increment address */
#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002)
/* Controls LCD controller */
......@@ -80,9 +80,9 @@
#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e)
/* Palette Registers */
#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Adress Register */
#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */
#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */
#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Adress Register */
#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */
#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */
#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */
......@@ -97,8 +97,8 @@
#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */
/* Line Drawing Registers */
#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Adress Register (H) */
#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Adress Register (L) */
#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */
#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */
#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */
#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */
#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */
......@@ -106,16 +106,16 @@
#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */
/* BitBLT Registers */
#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Adress Register (H) */
#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Adress Register (L) */
#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Adress Register (H) */
#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Adress Register (L) */
#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */
#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */
#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */
#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */
#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */
#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */
#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Adress Register (H) */
#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Adress Register (L) */
#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Adress Register (H) */
#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Adress Register (L) */
#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */
#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */
#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */
#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */
#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */
#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */
......
......@@ -17,7 +17,7 @@ extern void microdev_print_fpga_intc_status(void);
/*
* The following are useful macros for manipulating the interrupt
* controller (INTC) on the CPU-board FPGA. should be noted that there
* is an INTC on the FPGA, and a seperate INTC on the SH4-202 core -
* is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
* these are two different things, both of which need to be prorammed to
* correctly route - unfortunately, they have the same name and
* abbreviations!
......@@ -25,7 +25,7 @@ extern void microdev_print_fpga_intc_status(void);
#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interupt mask to enable/disable INTC in CPU-board FPGA */
#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */
#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */
......
......@@ -213,7 +213,7 @@
/* ----- Power mode 1 clock register -------------------------- */
#define POWER_MODE1_CLOCK (0x00004C + VOYAGER_BASE)
/* ----- Power mode controll register ------------------------- */
/* ----- Power mode control register ------------------------- */
#define POWER_MODE_CTRL (0x000054 + VOYAGER_BASE)
/* ----- Miscellaneous Timing register ------------------------ */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册