Kconfig 29.6 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux Kernel Configuration"

config ARM
	bool
	default y
11
	select RTC_LIB
12
	select SYS_SUPPORTS_APM_EMULATION
M
Mathieu Desnoyers 已提交
13
	select HAVE_OPROFILE
M
Mathieu Desnoyers 已提交
14
	select HAVE_KPROBES if (!XIP_KERNEL)
L
Linus Torvalds 已提交
15 16
	help
	  The ARM series is a line of low-power-consumption RISC chip designs
17
	  licensed by ARM Ltd and targeted at embedded applications and
L
Linus Torvalds 已提交
18
	  handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
19
	  manufactured, but legacy ARM-based PC hardware remains popular in
L
Linus Torvalds 已提交
20 21 22
	  Europe.  There is an ARM Linux project with a web page at
	  <http://www.arm.linux.org.uk/>.

23 24 25
config SYS_SUPPORTS_APM_EMULATION
	bool

D
David Brownell 已提交
26 27 28 29
config GENERIC_GPIO
	bool
	default n

30 31 32 33
config GENERIC_TIME
	bool
	default n

34 35 36 37
config GENERIC_CLOCKEVENTS
	bool
	default n

38 39 40 41 42
config GENERIC_CLOCKEVENTS_BROADCAST
	bool
	depends on GENERIC_CLOCKEVENTS
	default y if SMP && !LOCAL_TIMERS

L
Linus Torvalds 已提交
43 44 45 46
config MMU
	bool
	default y

A
Al Viro 已提交
47 48 49 50
config NO_IOPORT
	bool
	default n

L
Linus Torvalds 已提交
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
config EISA
	bool
	---help---
	  The Extended Industry Standard Architecture (EISA) bus was
	  developed as an open alternative to the IBM MicroChannel bus.

	  The EISA bus provided some of the features of the IBM MicroChannel
	  bus while maintaining backward compatibility with cards made for
	  the older ISA bus.  The EISA bus saw limited use between 1988 and
	  1995 when it was made obsolete by the PCI bus.

	  Say Y here if you are building a kernel for an EISA-based machine.

	  Otherwise, say N.

config SBUS
	bool

config MCA
	bool
	help
	  MicroChannel Architecture is found in some IBM PS/2 machines and
	  laptops.  It is a bus system similar to PCI or ISA. See
	  <file:Documentation/mca.txt> (and especially the web page given
	  there) before attempting to build an MCA bus kernel.

77 78 79 80
config GENERIC_HARDIRQS
	bool
	default y

81 82 83 84 85 86 87 88
config STACKTRACE_SUPPORT
	bool
	default y

config LOCKDEP_SUPPORT
	bool
	default y

R
Russell King 已提交
89 90 91 92
config TRACE_IRQFLAGS_SUPPORT
	bool
	default y

93 94 95 96 97 98 99 100
config HARDIRQS_SW_RESEND
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

N
Nick Piggin 已提交
101 102 103 104 105
config GENERIC_LOCKBREAK
	bool
	default y
	depends on SMP && PREEMPT

L
Linus Torvalds 已提交
106 107 108 109 110 111 112
config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

113 114 115 116 117 118 119 120
config ARCH_HAS_ILOG2_U32
	bool
	default n

config ARCH_HAS_ILOG2_U64
	bool
	default n

121 122 123 124
config GENERIC_HWEIGHT
	bool
	default y

L
Linus Torvalds 已提交
125 126 127 128
config GENERIC_CALIBRATE_DELAY
	bool
	default y

129 130 131
config ARCH_MAY_HAVE_PC_FDC
	bool

132 133 134 135
config ZONE_DMA
	bool
	default y

L
Linus Torvalds 已提交
136 137 138 139 140 141
config GENERIC_ISA_DMA
	bool

config FIQ
	bool

142 143 144
config ARCH_MTD_XIP
	bool

145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161
if OPROFILE

config OPROFILE_ARMV6
	def_bool y
	depends on CPU_V6 && !SMP
	select OPROFILE_ARM11_CORE

config OPROFILE_MPCORE
	def_bool y
	depends on CPU_V6 && SMP
	select OPROFILE_ARM11_CORE

config OPROFILE_ARM11_CORE
	bool

endif

162 163
config VECTORS_BASE
	hex
164
	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
165 166 167 168 169
	default DRAM_BASE if REMAP_VECTORS_TO_RAM
	default 0x00000000
	help
	  The base address of exception vectors.

L
Linus Torvalds 已提交
170 171 172 173 174 175
source "init/Kconfig"

menu "System Type"

choice
	prompt "ARM system type"
176
	default ARCH_VERSATILE
L
Linus Torvalds 已提交
177

178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194
config ARCH_AAEC2000
	bool "Agilent AAEC-2000 based"
	select ARM_AMBA
	help
	  This enables support for systems based on the Agilent AAEC-2000

config ARCH_INTEGRATOR
	bool "ARM Ltd. Integrator family"
	select ARM_AMBA
	select ICST525
	help
	  Support for ARM's Integrator platform.

config ARCH_REALVIEW
	bool "ARM Ltd. RealView family"
	select ARM_AMBA
	select ICST307
195
	select GENERIC_TIME
196
	select GENERIC_CLOCKEVENTS
197 198 199 200 201 202 203 204
	help
	  This enables support for ARM Ltd RealView boards.

config ARCH_VERSATILE
	bool "ARM Ltd. Versatile family"
	select ARM_AMBA
	select ARM_VIC
	select ICST307
205
	select GENERIC_TIME
206
	select GENERIC_CLOCKEVENTS
207 208 209
	help
	  This enables support for ARM Ltd Versatile board.

210 211
config ARCH_AT91
	bool "Atmel AT91"
D
David Brownell 已提交
212
	select GENERIC_GPIO
213
	help
214 215
	  This enables support for systems based on the Atmel AT91RM9200,
	  AT91SAM9 and AT91CAP9 processors.
216

L
Linus Torvalds 已提交
217
config ARCH_CLPS7500
218
	bool "Cirrus CL-PS7500FE"
L
Linus Torvalds 已提交
219
	select TIMER_ACORN
220
	select ISA
221
	select NO_IOPORT
222 223
	help
	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
L
Linus Torvalds 已提交
224 225

config ARCH_CLPS711X
226
	bool "Cirrus Logic CLPS711x/EP721x-based"
227 228
	help
	  Support for Cirrus Logic 711x/721x based boards.
L
Linus Torvalds 已提交
229 230 231 232 233

config ARCH_CO285
	bool "Co-EBSA285"
	select FOOTBRIDGE
	select FOOTBRIDGE_ADDIN
234 235
	help
	  Support for Intel's EBSA285 companion chip.
L
Linus Torvalds 已提交
236 237 238

config ARCH_EBSA110
	bool "EBSA-110"
239
	select ISA
240
	select NO_IOPORT
L
Linus Torvalds 已提交
241 242
	help
	  This is an evaluation board for the StrongARM processor available
243
	  from Digital. It has limited hardware on-board, including an
L
Linus Torvalds 已提交
244 245 246
	  Ethernet interface, two PCMCIA sockets, two serial ports and a
	  parallel port.

247 248 249 250
config ARCH_EP93XX
	bool "EP93xx-based"
	select ARM_AMBA
	select ARM_VIC
251
	select GENERIC_GPIO
252 253 254
	help
	  This enables support for the Cirrus EP93xx series of CPUs.

L
Linus Torvalds 已提交
255 256 257
config ARCH_FOOTBRIDGE
	bool "FootBridge"
	select FOOTBRIDGE
258 259 260
	help
	  Support for systems based on the DC21285 companion chip
	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
L
Linus Torvalds 已提交
261

262 263 264
config ARCH_NETX
	bool "Hilscher NetX based"
	select ARM_VIC
265
	help
266 267 268 269 270 271 272 273 274 275
	  This enables support for systems based on the Hilscher NetX Soc

config ARCH_H720X
	bool "Hynix HMS720x-based"
	select ISA_DMA_API
	help
	  This enables support for systems based on the Hynix HMS720x

config ARCH_IMX
	bool "IMX"
276
	select GENERIC_GPIO
277 278
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
279 280
	help
	  Support for Motorola's i.MX family of processors (MX1, MXL).
L
Linus Torvalds 已提交
281

282 283 284 285 286 287 288 289 290
config ARCH_IOP13XX
	bool "IOP13xx-based"
	depends on MMU
	select PLAT_IOP
	select PCI
	select ARCH_SUPPORTS_MSI
	help
	  Support for Intel's IOP13XX (XScale) family of processors.

291 292
config ARCH_IOP32X
	bool "IOP32x-based"
293
	depends on MMU
294
	select PLAT_IOP
295
	select PCI
296
	help
297 298 299 300 301 302
	  Support for Intel's 80219 and IOP32X (XScale) family of
	  processors.

config ARCH_IOP33X
	bool "IOP33x-based"
	depends on MMU
303
	select PLAT_IOP
304 305 306
	select PCI
	help
	  Support for Intel's IOP33X (XScale) family of processors.
L
Linus Torvalds 已提交
307

308 309
config ARCH_IXP23XX
 	bool "IXP23XX-based"
310
	depends on MMU
311
 	select PCI
312
	help
313
	  Support for Intel's IXP23xx (XScale) family of processors.
L
Linus Torvalds 已提交
314 315 316

config ARCH_IXP2000
	bool "IXP2400/2800-based"
317
	depends on MMU
318
	select PCI
319 320
	help
	  Support for Intel's IXP2400/2800 (XScale) family of processors.
L
Linus Torvalds 已提交
321

322 323
config ARCH_IXP4XX
	bool "IXP4xx-based"
324
	depends on MMU
325
	select GENERIC_GPIO
326 327
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
328
	help
329
	  Support for Intel's IXP4XX (XScale) family of processors.
330

L
Linus Torvalds 已提交
331 332 333 334 335 336 337 338 339 340 341 342 343
config ARCH_L7200
	bool "LinkUp-L7200"
	select FIQ
	help
	  Say Y here if you intend to run this kernel on a LinkUp Systems
	  L7200 Software Development Board which uses an ARM720T processor.
	  Information on this board can be obtained at:

	  <http://www.linkupsys.com/>

	  If you have any questions or comments about the Linux kernel port
	  to this board, send e-mail to <sjhill@cotw.com>.

344 345
config ARCH_KS8695
	bool "Micrel/Kendin KS8695"
346
	select GENERIC_GPIO
347 348 349 350
	help
	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
	  System-on-Chip devices.

351 352
config ARCH_NS9XXX
	bool "NetSilicon NS9xxx"
353
	select GENERIC_GPIO
354
	select GENERIC_TIME
355
	select GENERIC_CLOCKEVENTS
356 357 358 359 360 361
	help
	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
	  System.

	  <http://www.digi.com/products/microprocessors/index.jsp>

362 363 364 365 366 367
config ARCH_MXC
	bool "Freescale MXC/iMX-based"
	select ARCH_MTD_XIP
	help
	  Support for Freescale MXC/iMX-based family of processors

368 369 370
config ARCH_ORION
	bool "Marvell Orion"
	depends on MMU
T
Tzachi Perelstein 已提交
371
	select PCI
T
Tzachi Perelstein 已提交
372
	select GENERIC_GPIO
373 374
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
375 376 377
	help
	  Support for Marvell Orion System on Chip family.

378 379 380 381 382
config ARCH_PNX4008
	bool "Philips Nexperia PNX4008 Mobile"
	help
	  This enables support for Philips PNX4008 mobile platform.

L
Linus Torvalds 已提交
383
config ARCH_PXA
E
eric miao 已提交
384
	bool "PXA2xx/PXA3xx-based"
385
	depends on MMU
386
	select ARCH_MTD_XIP
D
David Brownell 已提交
387
	select GENERIC_GPIO
388
	select GENERIC_TIME
389
	select GENERIC_CLOCKEVENTS
390
	select TICK_ONESHOT
391
	help
E
eric miao 已提交
392
	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
L
Linus Torvalds 已提交
393 394 395 396 397 398

config ARCH_RPC
	bool "RiscPC"
	select ARCH_ACORN
	select FIQ
	select TIMER_ACORN
399
	select ARCH_MAY_HAVE_PC_FDC
400
	select ISA_DMA_API
A
Al Viro 已提交
401
	select NO_IOPORT
L
Linus Torvalds 已提交
402 403 404 405 406 407
	help
	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
	  CD-ROM interface, serial and parallel port, and the floppy drive.

config ARCH_SA1100
	bool "SA1100-based"
408
	select ISA
R
Russell King 已提交
409
	select ARCH_DISCONTIGMEM_ENABLE
410
	select ARCH_MTD_XIP
D
David Brownell 已提交
411
	select GENERIC_GPIO
412
	select GENERIC_TIME
413 414
	help
	  Support for StrongARM 11x0 based boards.
L
Linus Torvalds 已提交
415 416

config ARCH_S3C2410
417
	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
D
David Brownell 已提交
418
	select GENERIC_GPIO
L
Linus Torvalds 已提交
419 420 421
	help
	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
422
	  the Samsung SMDK2410 development board (and derivatives).
L
Linus Torvalds 已提交
423 424 425

config ARCH_SHARK
	bool "Shark"
426 427 428
	select ISA
	select ISA_DMA
	select PCI
429 430 431
	help
	  Support for the StrongARM based Digital DNARD machine, also known
	  as "Shark" (<http://www.shark-linux.de/shark.html>).
L
Linus Torvalds 已提交
432 433 434 435 436 437 438 439 440

config ARCH_LH7A40X
	bool "Sharp LH7A40X"
	help
	  Say Y here for systems based on one of the Sharp LH7A40X
	  System on a Chip processors.  These CPUs include an ARM922T
	  core with a wide array of integrated devices for
	  hand-held and low-power applications.

441 442 443 444
config ARCH_DAVINCI
	bool "TI DaVinci"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
445
	select GENERIC_GPIO
446 447 448
	help
	  Support for TI's DaVinci platform.

449 450 451 452 453 454 455
config ARCH_OMAP
	bool "TI OMAP"
	select GENERIC_GPIO
	select GENERIC_TIME
	help
	  Support for TI's OMAP platform (OMAP1 and OMAP2).

456 457 458 459 460 461 462 463 464 465 466
config ARCH_MSM7X00A
	bool "Qualcomm MSM7X00A"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS
	help
	  Support for Qualcomm MSM7X00A based systems.  This runs on the ARM11
	  apps processor of the MSM7X00A and depends on a shared memory
	  interface to the ARM9 modem processor which runs the baseband stack
	  and controls some vital subsystems (clock and power control, etc).
	  <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>

L
Linus Torvalds 已提交
467 468 469 470
endchoice

source "arch/arm/mach-clps711x/Kconfig"

471 472
source "arch/arm/mach-ep93xx/Kconfig"

L
Linus Torvalds 已提交
473 474 475 476
source "arch/arm/mach-footbridge/Kconfig"

source "arch/arm/mach-integrator/Kconfig"

477 478 479
source "arch/arm/mach-iop32x/Kconfig"

source "arch/arm/mach-iop33x/Kconfig"
L
Linus Torvalds 已提交
480

481 482
source "arch/arm/mach-iop13xx/Kconfig"

L
Linus Torvalds 已提交
483 484 485 486
source "arch/arm/mach-ixp4xx/Kconfig"

source "arch/arm/mach-ixp2000/Kconfig"

487 488
source "arch/arm/mach-ixp23xx/Kconfig"

L
Linus Torvalds 已提交
489 490 491 492
source "arch/arm/mach-pxa/Kconfig"

source "arch/arm/mach-sa1100/Kconfig"

493 494 495
source "arch/arm/plat-omap/Kconfig"

source "arch/arm/mach-omap1/Kconfig"
L
Linus Torvalds 已提交
496

497 498
source "arch/arm/mach-omap2/Kconfig"

499 500
source "arch/arm/mach-orion/Kconfig"

501
source "arch/arm/plat-s3c24xx/Kconfig"
502
source "arch/arm/plat-s3c/Kconfig"
503 504 505

if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
L
Linus Torvalds 已提交
506
source "arch/arm/mach-s3c2410/Kconfig"
507 508 509
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
source "arch/arm/mach-s3c2442/Kconfig"
510
source "arch/arm/mach-s3c2443/Kconfig"
511
endif
L
Linus Torvalds 已提交
512 513 514 515 516 517 518 519 520

source "arch/arm/mach-lh7a40x/Kconfig"

source "arch/arm/mach-imx/Kconfig"

source "arch/arm/mach-h720x/Kconfig"

source "arch/arm/mach-versatile/Kconfig"

521 522
source "arch/arm/mach-aaec2000/Kconfig"

523 524
source "arch/arm/mach-realview/Kconfig"

525
source "arch/arm/mach-at91/Kconfig"
526

527 528
source "arch/arm/plat-mxc/Kconfig"

529 530
source "arch/arm/mach-netx/Kconfig"

531 532
source "arch/arm/mach-ns9xxx/Kconfig"

533 534
source "arch/arm/mach-davinci/Kconfig"

535 536
source "arch/arm/mach-ks8695/Kconfig"

537 538
source "arch/arm/mach-msm/Kconfig"

L
Linus Torvalds 已提交
539 540 541 542
# Definitions to make life easier
config ARCH_ACORN
	bool

543 544 545
config PLAT_IOP
	bool

L
Linus Torvalds 已提交
546 547
source arch/arm/mm/Kconfig

548 549
config IWMMXT
	bool "Enable iWMMXt support"
550
	depends on CPU_XSCALE || CPU_XSC3
E
eric miao 已提交
551
	default y if PXA27x || PXA3xx
552 553 554 555
	help
	  Enable support for iWMMXt context switching at run time if
	  running on a CPU that supports it.

L
Linus Torvalds 已提交
556 557 558 559 560 561
#  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
config XSCALE_PMU
	bool
	depends on CPU_XSCALE && !XSCALE_PMU_TIMER
	default y

562 563 564 565
if !MMU
source "arch/arm/Kconfig-nommu"
endif

L
Linus Torvalds 已提交
566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588
endmenu

source "arch/arm/common/Kconfig"

config FORCE_MAX_ZONEORDER
	int
	depends on SA1111
	default "9"

menu "Bus support"

config ARM_AMBA
	bool

config ISA
	bool
	help
	  Find out whether you have ISA slots on your motherboard.  ISA is the
	  name of a bus system, i.e. the way the CPU talks to the other stuff
	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
	  newer boards don't support it.  If you have ISA, say Y, otherwise N.

589
# Select ISA DMA controller support
L
Linus Torvalds 已提交
590 591
config ISA_DMA
	bool
592
	select ISA_DMA_API
L
Linus Torvalds 已提交
593

594
# Select ISA DMA interface
A
Al Viro 已提交
595 596 597
config ISA_DMA_API
	bool

L
Linus Torvalds 已提交
598
config PCI
M
Mike Rapoport 已提交
599
	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
L
Linus Torvalds 已提交
600 601 602 603 604 605
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	  VESA. If you have PCI, say Y, otherwise N.

606 607 608
config PCI_SYSCALL
	def_bool PCI

L
Linus Torvalds 已提交
609 610 611 612 613 614
# Select the host bridge type
config PCI_HOST_VIA82C505
	bool
	depends on PCI && ARCH_SHARK
	default y

M
Mike Rapoport 已提交
615 616 617 618 619 620
config PCI_HOST_ITE8152
	bool
	depends on PCI && MACH_ARMCORE
	default y
	select DMABOUNCE

L
Linus Torvalds 已提交
621 622 623 624 625 626 627 628
source "drivers/pci/Kconfig"

source "drivers/pcmcia/Kconfig"

endmenu

menu "Kernel Features"

629 630
source "kernel/time/Kconfig"

L
Linus Torvalds 已提交
631 632
config SMP
	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
633
	depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP
L
Linus Torvalds 已提交
634 635 636 637 638 639 640 641 642 643 644
	help
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all, single
	  processor machines. On a single processor machine, the kernel will
	  run faster if you say N here.

A
Adrian Bunk 已提交
645
	  See also <file:Documentation/i386/IO-APIC.txt>,
L
Linus Torvalds 已提交
646 647 648 649 650 651 652 653 654 655 656
	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
	  <http://www.linuxdoc.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "4"

657 658 659 660 661 662 663
config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
	depends on SMP && HOTPLUG && EXPERIMENTAL
	help
	  Say Y here to experiment with turning CPUs off and on.  CPUs
	  can be controlled through /sys/devices/system/cpu.

664 665
config LOCAL_TIMERS
	bool "Use local timer interrupts"
666
	depends on SMP && REALVIEW_EB_ARM11MP
667 668 669 670 671 672 673
	default y
	help
	  Enable support for local timers on SMP platforms, rather then the
	  legacy IPI broadcast method.  Local timers allows the system
	  accounting to be spread across the timer interval, preventing a
	  "thundering herd" at every timer tick.

L
Linus Torvalds 已提交
674 675 676 677 678 679 680 681 682 683 684 685 686
config PREEMPT
	bool "Preemptible Kernel (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

	  Say Y here if you are building a kernel for a desktop, embedded
	  or real-time system.  Say N if you are unsure.

687 688
config NO_IDLE_HZ
	bool "Dynamic tick timer"
689
	depends on !GENERIC_CLOCKEVENTS
690 691 692 693 694 695 696 697 698 699 700 701 702
	help
	  Select this option if you want to disable continuous timer ticks
	  and have them programmed to occur as required. This option saves
	  power as the system can remain in idle state for longer.

	  By default dynamic tick is disabled during the boot, and can be
	  manually enabled with:

	    echo 1 > /sys/devices/system/timer/timer0/dyn_tick

	  Alternatively, if you want dynamic tick automatically enabled
	  during boot, pass "dyntick=enable" via the kernel command string.

703 704
	  Please note that dynamic tick may affect the accuracy of
	  timekeeping on some platforms depending on the implementation.
705 706
	  Currently at least OMAP, PXA2xx and SA11x0 platforms are known
	  to have accurate timekeeping with dynamic tick.
707

708 709 710 711
config HZ
	int
	default 128 if ARCH_L7200
	default 200 if ARCH_EBSA110 || ARCH_S3C2410
712
	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
713
	default AT91_TIMER_HZ if ARCH_AT91
714 715
	default 100

716 717 718 719 720 721 722 723 724 725 726 727 728 729 730
config AEABI
	bool "Use the ARM EABI to compile the kernel"
	help
	  This option allows for the kernel to be compiled using the latest
	  ARM ABI (aka EABI).  This is only useful if you are using a user
	  space environment that is also compiled with EABI.

	  Since there are major incompatibilities between the legacy ABI and
	  EABI, especially with regard to structure member alignment, this
	  option also changes the kernel syscall calling convention to
	  disambiguate both ABIs and allow for backward compatibility support
	  (selected with CONFIG_OABI_COMPAT).

	  To use this you need GCC version 4.0.0 or later.

731
config OABI_COMPAT
732
	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
733
	depends on AEABI && EXPERIMENTAL
734 735 736 737 738 739 740 741 742 743 744 745 746 747
	default y
	help
	  This option preserves the old syscall interface along with the
	  new (ARM EABI) one. It also provides a compatibility layer to
	  intercept syscalls that have structure arguments which layout
	  in memory differs between the legacy ABI and the new ARM EABI
	  (only for non "thumb" binaries). This option adds a tiny
	  overhead to all syscalls and produces a slightly larger kernel.
	  If you know you'll be using only pure EABI user space then you
	  can say N here. If this option is not selected and you attempt
	  to execute a legacy ABI binary then the result will be
	  UNPREDICTABLE (in fact it can be predicted that it won't work
	  at all). If in doubt say Y.

748
config ARCH_DISCONTIGMEM_ENABLE
L
Linus Torvalds 已提交
749
	bool
750
	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
L
Linus Torvalds 已提交
751 752 753 754 755 756
	help
	  Say Y to support efficient handling of discontiguous physical memory,
	  for architectures which are either NUMA (Non-Uniform Memory Access)
	  or have huge holes in the physical address space for other reasons.
	  See <file:Documentation/vm/numa> for more.

Y
Yasunori Goto 已提交
757 758 759 760 761 762
config NODES_SHIFT
	int
	default "4" if ARCH_LH7A40X
	default "2"
	depends on NEED_MULTIPLE_NODES

763 764
source "mm/Kconfig"

L
Linus Torvalds 已提交
765 766 767 768 769 770
config LEDS
	bool "Timer and CPU usage LEDs"
	depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
771
		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
772
		   ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
R
Ronen Shitrit 已提交
773
		   ARCH_KS8695 || MACH_RD88F5182
L
Linus Torvalds 已提交
774 775 776 777 778 779 780 781 782 783 784 785 786
	help
	  If you say Y here, the LEDs on your machine will be used
	  to provide useful information about your current system status.

	  If you are compiling a kernel for a NetWinder or EBSA-285, you will
	  be able to select which LEDs are active using the options below. If
	  you are compiling a kernel for the EBSA-110 or the LART however, the
	  red LED will simply flash regularly to indicate that the system is
	  still functional. It is safe to say Y here if you have a CATS
	  system, but the driver will do nothing.

config LEDS_TIMER
	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
D
David Brownell 已提交
787 788
			    OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
			    || MACH_OMAP_PERSEUS2
L
Linus Torvalds 已提交
789
	depends on LEDS
790
	depends on !GENERIC_CLOCKEVENTS
L
Linus Torvalds 已提交
791 792 793 794 795 796 797 798 799 800 801 802 803 804
	default y if ARCH_EBSA110
	help
	  If you say Y here, one of the system LEDs (the green one on the
	  NetWinder, the amber one on the EBSA285, or the red one on the LART)
	  will flash regularly to indicate that the system is still
	  operational. This is mainly useful to kernel hackers who are
	  debugging unstable kernels.

	  The LART uses the same LED for both Timer LED and CPU usage LED
	  functions. You may choose to use both, but the Timer LED function
	  will overrule the CPU usage LED.

config LEDS_CPU
	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
D
David Brownell 已提交
805 806 807
			!ARCH_OMAP) \
			|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
			|| MACH_OMAP_PERSEUS2
L
Linus Torvalds 已提交
808 809 810 811 812 813 814 815 816 817 818 819
	depends on LEDS
	help
	  If you say Y here, the red LED will be used to give a good real
	  time indication of CPU usage, by lighting whenever the idle task
	  is not currently executing.

	  The LART uses the same LED for both Timer LED and CPU usage LED
	  functions. You may choose to use both, but the Timer LED function
	  will overrule the CPU usage LED.

config ALIGNMENT_TRAP
	bool
820
	depends on CPU_CP15_MMU
L
Linus Torvalds 已提交
821 822
	default y if !ARCH_EBSA110
	help
823
	  ARM processors cannot fetch/store information which is not
L
Linus Torvalds 已提交
824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851
	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
	  address divisible by 4. On 32-bit ARM processors, these non-aligned
	  fetch/store instructions will be emulated in software if you say
	  here, which has a severe performance impact. This is necessary for
	  correct operation of some network protocols. With an IP-only
	  configuration it is safe to say N, otherwise say Y.

endmenu

menu "Boot options"

# Compressed boot loader in ROM.  Yes, we really want to ask about
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM_TEXT
	hex "Compressed ROM boot loader base address"
	default "0"
	help
	  The physical address at which the ROM-able zImage is to be
	  placed in the target.  Platforms which normally make use of
	  ROM-able zImage formats normally set this to a suitable
	  value in their defconfig file.

	  If ZBOOT_ROM is not enabled, this has no effect.

config ZBOOT_ROM_BSS
	hex "Compressed ROM boot loader BSS address"
	default "0"
	help
852 853 854 855 856 857
	  The base address of an area of read/write memory in the target
	  for the ROM-able zImage which must be available while the
	  decompressor is running. It must be large enough to hold the
	  entire decompressed kernel plus an additional 128 KiB.
	  Platforms which normally make use of ROM-able zImage formats
	  normally set this to a suitable value in their defconfig file.
L
Linus Torvalds 已提交
858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907

	  If ZBOOT_ROM is not enabled, this has no effect.

config ZBOOT_ROM
	bool "Compressed boot loader in ROM/flash"
	depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
	help
	  Say Y here if you intend to execute your compressed kernel image
	  (zImage) directly from ROM or flash.  If unsure, say N.

config CMDLINE
	string "Default kernel command string"
	default ""
	help
	  On some architectures (EBSA110 and CATS), there is currently no way
	  for the boot loader to pass arguments to the kernel. For these
	  architectures, you should supply some command-line options at build
	  time by entering them here. As a minimum, you should specify the
	  memory size and the root device (e.g., mem=64M root=/dev/nfs).

config XIP_KERNEL
	bool "Kernel Execute-In-Place from ROM"
	depends on !ZBOOT_ROM
	help
	  Execute-In-Place allows the kernel to run from non-volatile storage
	  directly addressable by the CPU, such as NOR flash. This saves RAM
	  space since the text section of the kernel is not loaded from flash
	  to RAM.  Read-write sections, such as the data section and stack,
	  are still copied to RAM.  The XIP kernel is not compressed since
	  it has to run directly from flash, so it will take more space to
	  store it.  The flash address used to link the kernel object files,
	  and for storing it, is configuration dependent. Therefore, if you
	  say Y here, you must know the proper physical address where to
	  store the kernel image depending on your own flash memory usage.

	  Also note that the make target becomes "make xipImage" rather than
	  "make zImage" or "make Image".  The final kernel binary to put in
	  ROM memory will be arch/arm/boot/xipImage.

	  If unsure, say N.

config XIP_PHYS_ADDR
	hex "XIP Kernel Physical Location"
	depends on XIP_KERNEL
	default "0x00080000"
	help
	  This is the physical address in your flash memory the kernel will
	  be linked for and stored to.  This address is dependent on your
	  own flash usage.

R
Richard Purdie 已提交
908 909 910 911 912 913
config KEXEC
	bool "Kexec system call (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	help
	  kexec is a system call that implements the ability to shutdown your
	  current kernel, and to start another kernel.  It is like a reboot
M
Matt LaPlante 已提交
914
	  but it is independent of the system firmware.   And like a reboot
R
Richard Purdie 已提交
915 916 917 918 919 920 921
	  you can start any kernel with it, not just Linux.

	  It is an ongoing process to be certain the hardware in a machine
	  is properly shutdown, so do not be surprised if this code does not
	  initially work for you.  It may help to enable device hotplugging
	  support.

922 923 924 925 926 927 928
config ATAGS_PROC
	bool "Export atags in procfs"
	default n
	help
	  Should the atags used to boot the kernel be exported in an "atags"
	  file in procfs. Useful with kexec.

L
Linus Torvalds 已提交
929 930
endmenu

R
Russell King 已提交
931
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
L
Linus Torvalds 已提交
932 933 934 935 936 937 938

menu "CPU Frequency scaling"

source "drivers/cpufreq/Kconfig"

config CPU_FREQ_SA1100
	bool
939
	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
L
Linus Torvalds 已提交
940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957
	default y

config CPU_FREQ_SA1110
	bool
	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
	default y

config CPU_FREQ_INTEGRATOR
	tristate "CPUfreq driver for ARM Integrator CPUs"
	depends on ARCH_INTEGRATOR && CPU_FREQ
	default y
	help
	  This enables the CPUfreq driver for ARM Integrator CPUs.

	  For details, take a look at <file:Documentation/cpu-freq>.

	  If in doubt, say Y.

958 959 960 961 962 963 964 965 966
config CPU_FREQ_IMX
	tristate "CPUfreq driver for i.MX CPUs"
	depends on ARCH_IMX && CPU_FREQ
	default n
	help
	  This enables the CPUfreq driver for i.MX CPUs.

	  If in doubt, say N.

R
Russell King 已提交
967 968 969 970 971 972
config CPU_FREQ_PXA
	bool
	depends on CPU_FREQ && ARCH_PXA && PXA25x
	default y
	select CPU_FREQ_DEFAULT_GOV_USERSPACE

L
Linus Torvalds 已提交
973 974 975 976 977 978 979 980 981 982
endmenu

endif

menu "Floating point emulation"

comment "At least one emulation must be selected"

config FPE_NWFPE
	bool "NWFPE math emulation"
983
	depends on !AEABI || OABI_COMPAT
L
Linus Torvalds 已提交
984 985 986 987 988 989 990 991 992 993 994
	---help---
	  Say Y to include the NWFPE floating point emulator in the kernel.
	  This is necessary to run most binaries. Linux does not currently
	  support floating point hardware so you need to say Y here even if
	  your machine has an FPA or floating point co-processor podule.

	  You may say N here if you are going to load the Acorn FPEmulator
	  early in the bootup.

config FPE_NWFPE_XP
	bool "Support extended precision"
995
	depends on FPE_NWFPE
L
Linus Torvalds 已提交
996 997 998 999 1000 1001 1002 1003 1004 1005 1006
	help
	  Say Y to include 80-bit support in the kernel floating-point
	  emulator.  Otherwise, only 32 and 64-bit support is compiled in.
	  Note that gcc does not generate 80-bit operations by default,
	  so in most cases this option only enlarges the size of the
	  floating point emulator without any good reason.

	  You almost surely want to say N here.

config FPE_FASTFPE
	bool "FastFPE math emulation (EXPERIMENTAL)"
1007
	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
L
Linus Torvalds 已提交
1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020
	---help---
	  Say Y here to include the FAST floating point emulator in the kernel.
	  This is an experimental much faster emulator which now also has full
	  precision for the mantissa.  It does not support any exceptions.
	  It is very simple, and approximately 3-6 times faster than NWFPE.

	  It should be sufficient for most programs.  It may be not suitable
	  for scientific calculations, but you have to check this for yourself.
	  If you do not feel you need a faster FP emulation you should better
	  choose NWFPE.

config VFP
	bool "VFP-format floating point maths"
R
Russell King 已提交
1021
	depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
L
Linus Torvalds 已提交
1022 1023 1024 1025 1026 1027 1028 1029 1030
	help
	  Say Y to include VFP support code in the kernel. This is needed
	  if your hardware includes a VFP unit.

	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
	  release notes and additional status information.

	  Say N if your target does not have VFP hardware.

1031 1032 1033 1034 1035
config VFPv3
	bool
	depends on VFP
	default y if CPU_V7

1036 1037 1038 1039 1040 1041 1042
config NEON
	bool "Advanced SIMD (NEON) Extension support"
	depends on VFPv3 && CPU_V7
	help
	  Say Y to include support code for NEON, the ARMv7 Advanced SIMD
	  Extension.

L
Linus Torvalds 已提交
1043 1044 1045 1046 1047 1048 1049 1050
endmenu

menu "Userspace binary formats"

source "fs/Kconfig.binfmt"

config ARTHUR
	tristate "RISC OS personality"
1051
	depends on !AEABI
L
Linus Torvalds 已提交
1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062
	help
	  Say Y here to include the kernel code necessary if you want to run
	  Acorn RISC OS/Arthur binaries under Linux. This code is still very
	  experimental; if this sounds frightening, say N and sleep in peace.
	  You can also say M here to compile this support as a module (which
	  will be called arthur).

endmenu

menu "Power management options"

R
Russell King 已提交
1063
source "kernel/power/Kconfig"
L
Linus Torvalds 已提交
1064

J
Johannes Berg 已提交
1065 1066 1067
config ARCH_SUSPEND_POSSIBLE
	def_bool y

L
Linus Torvalds 已提交
1068 1069
endmenu

1070 1071
source "net/Kconfig"

L
Linus Torvalds 已提交
1072 1073 1074 1075
menu "Device Drivers"

source "drivers/base/Kconfig"

P
Pavel Machek 已提交
1076 1077
source "drivers/connector/Kconfig"

1078
if ALIGNMENT_TRAP || !CPU_CP15_MMU
L
Linus Torvalds 已提交
1079 1080 1081 1082 1083 1084 1085 1086 1087
source "drivers/mtd/Kconfig"
endif

source "drivers/parport/Kconfig"

source "drivers/pnp/Kconfig"

source "drivers/block/Kconfig"

1088 1089 1090 1091
# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4

source "drivers/misc/Kconfig"

1092
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
1093
	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
1094 1095
	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
	|| ARCH_IXP23XX
L
Linus Torvalds 已提交
1096 1097 1098 1099 1100
source "drivers/ide/Kconfig"
endif

source "drivers/scsi/Kconfig"

1101 1102
source "drivers/ata/Kconfig"

L
Linus Torvalds 已提交
1103 1104 1105 1106 1107 1108 1109 1110
source "drivers/md/Kconfig"

source "drivers/message/fusion/Kconfig"

source "drivers/ieee1394/Kconfig"

source "drivers/message/i2o/Kconfig"

1111
source "drivers/net/Kconfig"
L
Linus Torvalds 已提交
1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122

source "drivers/isdn/Kconfig"

# input before char - char/joystick depends on it. As does USB.

source "drivers/input/Kconfig"

source "drivers/char/Kconfig"

source "drivers/i2c/Kconfig"

1123 1124
source "drivers/spi/Kconfig"

1125 1126
source "drivers/w1/Kconfig"

1127 1128
source "drivers/power/Kconfig"

1129 1130
source "drivers/hwmon/Kconfig"

1131 1132
source "drivers/watchdog/Kconfig"

1133
source "drivers/ssb/Kconfig"
L
Linus Torvalds 已提交
1134

1135
#source "drivers/l3/Kconfig"
L
Linus Torvalds 已提交
1136

1137 1138
source "drivers/mfd/Kconfig"

L
Linus Torvalds 已提交
1139 1140 1141 1142 1143 1144
source "drivers/media/Kconfig"

source "drivers/video/Kconfig"

source "sound/Kconfig"

1145 1146
source "drivers/hid/Kconfig"

L
Linus Torvalds 已提交
1147 1148 1149 1150
source "drivers/usb/Kconfig"

source "drivers/mmc/Kconfig"

1151 1152
source "drivers/leds/Kconfig"

1153 1154
source "drivers/rtc/Kconfig"

1155 1156
source "drivers/dma/Kconfig"

1157 1158
source "drivers/dca/Kconfig"

L
Linus Torvalds 已提交
1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169
endmenu

source "fs/Kconfig"

source "arch/arm/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"